perf annotate browser: Allow showing offsets in more than just jump targets
Jesper wanted to see offsets at callq sites when doing some performance
investigation related to retpolines, so save him some time by providing
a 'O' hotkey to allow showing offsets from function start at call
instructions or in all instructions, just go on pressing 'O' till the
offsets you need appear.
Example:
Starts with:
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│ ↑ je 2a
│ ┌──cmp $0xffffffff,%r13d
│ ├──je d0
│ │ mov $0x53e3,%edi
│ │→ callq __const_udelay
│ │ sub $0x1,%r15d
│ │↑ jne 83
│ │ mov 0x8(%rbp),%rax
│ │ testb $0x20,0x1799(%rax)
│ │↑ je 2a
│ │ mov 0x200(%rax),%rdi
│ │ mov %r13d,%edx
│ │ mov $0xffffffffc02595d8,%rsi
│ │→ callq netdev_warn
│ │↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│ mov %rbp,%rdi
│ mov %eax,0x4(%rsp)
│ → callq ixgbe_remove_adapter.isra.77
│ mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Pess 'O':
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│ ↑ je 2a
│ ┌──cmp $0xffffffff,%r13d
│ ├──je d0
│ │ mov $0x53e3,%edi
│99:│→ callq __const_udelay
│ │ sub $0x1,%r15d
│ │↑ jne 83
│ │ mov 0x8(%rbp),%rax
│ │ testb $0x20,0x1799(%rax)
│ │↑ je 2a
│ │ mov 0x200(%rax),%rdi
│ │ mov %r13d,%edx
│ │ mov $0xffffffffc02595d8,%rsi
│c6:│→ callq netdev_warn
│ │↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│ mov %rbp,%rdi
│ mov %eax,0x4(%rsp)
│db: → callq ixgbe_remove_adapter.isra.77
│ mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Press 'O' again:
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│8c: ↑ je 2a
│8e:┌──cmp $0xffffffff,%r13d
│92:├──je d0
│94:│ mov $0x53e3,%edi
│99:│→ callq __const_udelay
│9e:│ sub $0x1,%r15d
│a2:│↑ jne 83
│a4:│ mov 0x8(%rbp),%rax
│a8:│ testb $0x20,0x1799(%rax)
│af:│↑ je 2a
│b5:│ mov 0x200(%rax),%rdi
│bc:│ mov %r13d,%edx
│bf:│ mov $0xffffffffc02595d8,%rsi
│c6:│→ callq netdev_warn
│cb:│↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│d4: mov %rbp,%rdi
│d7: mov %eax,0x4(%rsp)
│db: → callq ixgbe_remove_adapter.isra.77
│e0: mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Press 'O' again and it will show just jump target offsets.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-upp6pfdetwlsx18ec2uf1od4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1 file changed