[PATCH] fuse: no backgrounding on interrupt
Don't put requests into the background when a fatal interrupt occurs while the
request is in userspace. This removes a major wart from the implementation.
Backgrounding of requests was introduced to allow breaking of deadlocks.
However now the same can be achieved by aborting the filesystem through the
'abort' sysfs attribute.
This is a change in the interface, but should not cause problems, since these
kinds of deadlocks never happen during normal operation.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 104a62d..fec4779 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -64,18 +64,6 @@
sigprocmask(SIG_SETMASK, oldset, NULL);
}
-/*
- * Reset request, so that it can be reused
- *
- * The caller must be _very_ careful to make sure, that it is holding
- * the only reference to req
- */
-void fuse_reset_request(struct fuse_req *req)
-{
- BUG_ON(atomic_read(&req->count) != 1);
- fuse_request_init(req);
-}
-
static void __fuse_get_request(struct fuse_req *req)
{
atomic_inc(&req->count);
@@ -103,6 +91,10 @@
if (intr)
goto out;
+ err = -ENOTCONN;
+ if (!fc->connected)
+ goto out;
+
req = fuse_request_alloc();
err = -ENOMEM;
if (!req)
@@ -129,113 +121,38 @@
}
/*
- * Called with sbput_sem held for read (request_end) or write
- * (fuse_put_super). By the time fuse_put_super() is finished, all
- * inodes belonging to background requests must be released, so the
- * iputs have to be done within the locked region.
- */
-void fuse_release_background(struct fuse_conn *fc, struct fuse_req *req)
-{
- iput(req->inode);
- iput(req->inode2);
- spin_lock(&fc->lock);
- list_del(&req->bg_entry);
- if (fc->num_background == FUSE_MAX_BACKGROUND) {
- fc->blocked = 0;
- wake_up_all(&fc->blocked_waitq);
- }
- fc->num_background--;
- spin_unlock(&fc->lock);
-}
-
-/*
* This function is called when a request is finished. Either a reply
* has arrived or it was interrupted (and not yet sent) or some error
* occurred during communication with userspace, or the device file
- * was closed. In case of a background request the reference to the
- * stored objects are released. The requester thread is woken up (if
- * still waiting), the 'end' callback is called if given, else the
- * reference to the request is released
- *
- * Releasing extra reference for foreground requests must be done
- * within the same locked region as setting state to finished. This
- * is because fuse_reset_request() may be called after request is
- * finished and it must be the sole possessor. If request is
- * interrupted and put in the background, it will return with an error
- * and hence never be reset and reused.
+ * was closed. The requester thread is woken up (if still waiting),
+ * the 'end' callback is called if given, else the reference to the
+ * request is released
*
* Called with fc->lock, unlocks it
*/
static void request_end(struct fuse_conn *fc, struct fuse_req *req)
{
+ void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
+ req->end = NULL;
list_del(&req->list);
req->state = FUSE_REQ_FINISHED;
- if (!req->background) {
- spin_unlock(&fc->lock);
- wake_up(&req->waitq);
- fuse_put_request(fc, req);
- } else {
- void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
- req->end = NULL;
- spin_unlock(&fc->lock);
- down_read(&fc->sbput_sem);
- if (fc->mounted)
- fuse_release_background(fc, req);
- up_read(&fc->sbput_sem);
-
- /* fput must go outside sbput_sem, otherwise it can deadlock */
- if (req->file)
- fput(req->file);
-
- if (end)
- end(fc, req);
- else
- fuse_put_request(fc, req);
+ if (req->background) {
+ if (fc->num_background == FUSE_MAX_BACKGROUND) {
+ fc->blocked = 0;
+ wake_up_all(&fc->blocked_waitq);
+ }
+ fc->num_background--;
}
-}
-
-/*
- * Unfortunately request interruption not just solves the deadlock
- * problem, it causes problems too. These stem from the fact, that an
- * interrupted request is continued to be processed in userspace,
- * while all the locks and object references (inode and file) held
- * during the operation are released.
- *
- * To release the locks is exactly why there's a need to interrupt the
- * request, so there's not a lot that can be done about this, except
- * introduce additional locking in userspace.
- *
- * More important is to keep inode and file references until userspace
- * has replied, otherwise FORGET and RELEASE could be sent while the
- * inode/file is still used by the filesystem.
- *
- * For this reason the concept of "background" request is introduced.
- * An interrupted request is backgrounded if it has been already sent
- * to userspace. Backgrounding involves getting an extra reference to
- * inode(s) or file used in the request, and adding the request to
- * fc->background list. When a reply is received for a background
- * request, the object references are released, and the request is
- * removed from the list. If the filesystem is unmounted while there
- * are still background requests, the list is walked and references
- * are released as if a reply was received.
- *
- * There's one more use for a background request. The RELEASE message is
- * always sent as background, since it doesn't return an error or
- * data.
- */
-static void background_request(struct fuse_conn *fc, struct fuse_req *req)
-{
- req->background = 1;
- list_add(&req->bg_entry, &fc->background);
- fc->num_background++;
- if (fc->num_background == FUSE_MAX_BACKGROUND)
- fc->blocked = 1;
- if (req->inode)
- req->inode = igrab(req->inode);
- if (req->inode2)
- req->inode2 = igrab(req->inode2);
+ spin_unlock(&fc->lock);
+ dput(req->dentry);
+ mntput(req->vfsmount);
if (req->file)
- get_file(req->file);
+ fput(req->file);
+ wake_up(&req->waitq);
+ if (end)
+ end(fc, req);
+ else
+ fuse_put_request(fc, req);
}
/* Called with fc->lock held. Releases, and then reacquires it. */
@@ -244,9 +161,14 @@
sigset_t oldset;
spin_unlock(&fc->lock);
- block_sigs(&oldset);
- wait_event_interruptible(req->waitq, req->state == FUSE_REQ_FINISHED);
- restore_sigs(&oldset);
+ if (req->force)
+ wait_event(req->waitq, req->state == FUSE_REQ_FINISHED);
+ else {
+ block_sigs(&oldset);
+ wait_event_interruptible(req->waitq,
+ req->state == FUSE_REQ_FINISHED);
+ restore_sigs(&oldset);
+ }
spin_lock(&fc->lock);
if (req->state == FUSE_REQ_FINISHED && !req->interrupted)
return;
@@ -268,8 +190,11 @@
if (req->state == FUSE_REQ_PENDING) {
list_del(&req->list);
__fuse_put_request(req);
- } else if (req->state == FUSE_REQ_SENT)
- background_request(fc, req);
+ } else if (req->state == FUSE_REQ_SENT) {
+ spin_unlock(&fc->lock);
+ wait_event(req->waitq, req->state == FUSE_REQ_FINISHED);
+ spin_lock(&fc->lock);
+ }
}
static unsigned len_args(unsigned numargs, struct fuse_arg *args)
@@ -327,8 +252,12 @@
static void request_send_nowait(struct fuse_conn *fc, struct fuse_req *req)
{
spin_lock(&fc->lock);
- background_request(fc, req);
if (fc->connected) {
+ req->background = 1;
+ fc->num_background++;
+ if (fc->num_background == FUSE_MAX_BACKGROUND)
+ fc->blocked = 1;
+
queue_request(fc, req);
spin_unlock(&fc->lock);
} else {
@@ -883,10 +812,12 @@
spin_lock(&fc->lock);
if (fc->connected) {
fc->connected = 0;
+ fc->blocked = 0;
end_io_requests(fc);
end_requests(fc, &fc->pending);
end_requests(fc, &fc->processing);
wake_up_all(&fc->waitq);
+ wake_up_all(&fc->blocked_waitq);
kill_fasync(&fc->fasync, SIGIO, POLL_IN);
}
spin_unlock(&fc->lock);