remoteproc: ingenic: Added remoteproc driver
This driver is used to boot, communicate with and load firmwares to the
MIPS co-processor found in the VPU hardware of the JZ47xx SoCs from
Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200515104340.10473-4-paul@crapouillou.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/drivers/remoteproc/ingenic_rproc.c b/drivers/remoteproc/ingenic_rproc.c
new file mode 100644
index 0000000..189020d
--- /dev/null
+++ b/drivers/remoteproc/ingenic_rproc.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ingenic JZ47xx remoteproc driver
+ * Copyright 2019, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+#define REG_AUX_CTRL 0x0
+#define REG_AUX_MSG_ACK 0x10
+#define REG_AUX_MSG 0x14
+#define REG_CORE_MSG_ACK 0x18
+#define REG_CORE_MSG 0x1C
+
+#define AUX_CTRL_SLEEP BIT(31)
+#define AUX_CTRL_MSG_IRQ_EN BIT(3)
+#define AUX_CTRL_NMI_RESETS BIT(2)
+#define AUX_CTRL_NMI BIT(1)
+#define AUX_CTRL_SW_RESET BIT(0)
+
+struct vpu_mem_map {
+ const char *name;
+ unsigned int da;
+};
+
+struct vpu_mem_info {
+ const struct vpu_mem_map *map;
+ unsigned long len;
+ void __iomem *base;
+};
+
+static const struct vpu_mem_map vpu_mem_map[] = {
+ { "tcsm0", 0x132b0000 },
+ { "tcsm1", 0xf4000000 },
+ { "sram", 0x132f0000 },
+};
+
+/**
+ * struct vpu - Ingenic VPU remoteproc private structure
+ * @irq: interrupt number
+ * @clks: pointers to the VPU and AUX clocks
+ * @aux_base: raw pointer to the AUX interface registers
+ * @mem_info: array of struct vpu_mem_info, which contain the mapping info of
+ * each of the external memories
+ * @dev: private pointer to the device
+ */
+struct vpu {
+ int irq;
+ struct clk_bulk_data clks[2];
+ void __iomem *aux_base;
+ struct vpu_mem_info mem_info[ARRAY_SIZE(vpu_mem_map)];
+ struct device *dev;
+};
+
+static int ingenic_rproc_start(struct rproc *rproc)
+{
+ struct vpu *vpu = rproc->priv;
+ u32 ctrl;
+
+ enable_irq(vpu->irq);
+
+ /* Reset the AUX and enable message IRQ */
+ ctrl = AUX_CTRL_NMI_RESETS | AUX_CTRL_NMI | AUX_CTRL_MSG_IRQ_EN;
+ writel(ctrl, vpu->aux_base + REG_AUX_CTRL);
+
+ return 0;
+}
+
+static int ingenic_rproc_stop(struct rproc *rproc)
+{
+ struct vpu *vpu = rproc->priv;
+
+ disable_irq(vpu->irq);
+
+ /* Keep AUX in reset mode */
+ writel(AUX_CTRL_SW_RESET, vpu->aux_base + REG_AUX_CTRL);
+
+ return 0;
+}
+
+static void ingenic_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct vpu *vpu = rproc->priv;
+
+ writel(vqid, vpu->aux_base + REG_CORE_MSG);
+}
+
+static void *ingenic_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+{
+ struct vpu *vpu = rproc->priv;
+ void __iomem *va = NULL;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(vpu_mem_map); i++) {
+ const struct vpu_mem_info *info = &vpu->mem_info[i];
+ const struct vpu_mem_map *map = info->map;
+
+ if (da >= map->da && (da + len) < (map->da + info->len)) {
+ va = info->base + (da - map->da);
+ break;
+ }
+ }
+
+ return (__force void *)va;
+}
+
+static struct rproc_ops ingenic_rproc_ops = {
+ .start = ingenic_rproc_start,
+ .stop = ingenic_rproc_stop,
+ .kick = ingenic_rproc_kick,
+ .da_to_va = ingenic_rproc_da_to_va,
+};
+
+static irqreturn_t vpu_interrupt(int irq, void *data)
+{
+ struct rproc *rproc = data;
+ struct vpu *vpu = rproc->priv;
+ u32 vring;
+
+ vring = readl(vpu->aux_base + REG_AUX_MSG);
+
+ /* Ack the interrupt */
+ writel(0, vpu->aux_base + REG_AUX_MSG_ACK);
+
+ return rproc_vq_interrupt(rproc, vring);
+}
+
+static void ingenic_rproc_disable_clks(void *data)
+{
+ struct vpu *vpu = data;
+
+ pm_runtime_resume(vpu->dev);
+ pm_runtime_disable(vpu->dev);
+
+ clk_bulk_disable_unprepare(ARRAY_SIZE(vpu->clks), vpu->clks);
+}
+
+static int ingenic_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+ struct rproc *rproc;
+ struct vpu *vpu;
+ unsigned int i;
+ int ret;
+
+ rproc = devm_rproc_alloc(dev, "ingenic-vpu",
+ &ingenic_rproc_ops, NULL, sizeof(*vpu));
+ if (!rproc)
+ return -ENOMEM;
+
+ vpu = rproc->priv;
+ vpu->dev = &pdev->dev;
+ platform_set_drvdata(pdev, vpu);
+
+ mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "aux");
+ vpu->aux_base = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(vpu->aux_base)) {
+ dev_err(dev, "Failed to ioremap\n");
+ return PTR_ERR(vpu->aux_base);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(vpu_mem_map); i++) {
+ mem = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ vpu_mem_map[i].name);
+
+ vpu->mem_info[i].base = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(vpu->mem_info[i].base)) {
+ ret = PTR_ERR(vpu->mem_info[i].base);
+ dev_err(dev, "Failed to ioremap\n");
+ return ret;
+ }
+
+ vpu->mem_info[i].len = resource_size(mem);
+ vpu->mem_info[i].map = &vpu_mem_map[i];
+ }
+
+ vpu->clks[0].id = "vpu";
+ vpu->clks[1].id = "aux";
+
+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(vpu->clks), vpu->clks);
+ if (ret) {
+ dev_err(dev, "Failed to get clocks\n");
+ return ret;
+ }
+
+ vpu->irq = platform_get_irq(pdev, 0);
+ if (vpu->irq < 0)
+ return vpu->irq;
+
+ ret = devm_request_irq(dev, vpu->irq, vpu_interrupt, 0, "VPU", rproc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to request IRQ\n");
+ return ret;
+ }
+
+ disable_irq(vpu->irq);
+
+ /* The clocks must be enabled for the firmware to be loaded in TCSM */
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(vpu->clks), vpu->clks);
+ if (ret) {
+ dev_err(dev, "Unable to start clocks\n");
+ return ret;
+ }
+
+ pm_runtime_irq_safe(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ pm_runtime_use_autosuspend(dev);
+
+ ret = devm_add_action_or_reset(dev, ingenic_rproc_disable_clks, vpu);
+ if (ret) {
+ dev_err(dev, "Unable to register action\n");
+ goto out_pm_put;
+ }
+
+ ret = devm_rproc_add(dev, rproc);
+ if (ret) {
+ dev_err(dev, "Failed to register remote processor\n");
+ goto out_pm_put;
+ }
+
+out_pm_put:
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
+static const struct of_device_id ingenic_rproc_of_matches[] = {
+ { .compatible = "ingenic,jz4770-vpu-rproc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ingenic_rproc_of_matches);
+
+static int __maybe_unused ingenic_rproc_suspend(struct device *dev)
+{
+ struct vpu *vpu = dev_get_drvdata(dev);
+
+ clk_bulk_disable(ARRAY_SIZE(vpu->clks), vpu->clks);
+
+ return 0;
+}
+
+static int __maybe_unused ingenic_rproc_resume(struct device *dev)
+{
+ struct vpu *vpu = dev_get_drvdata(dev);
+
+ return clk_bulk_enable(ARRAY_SIZE(vpu->clks), vpu->clks);
+}
+
+static const struct dev_pm_ops __maybe_unused ingenic_rproc_pm = {
+ SET_RUNTIME_PM_OPS(ingenic_rproc_suspend, ingenic_rproc_resume, NULL)
+};
+
+static struct platform_driver ingenic_rproc_driver = {
+ .probe = ingenic_rproc_probe,
+ .driver = {
+ .name = "ingenic-vpu",
+#ifdef CONFIG_PM
+ .pm = &ingenic_rproc_pm,
+#endif
+ .of_match_table = ingenic_rproc_of_matches,
+ },
+};
+module_platform_driver(ingenic_rproc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ47xx Remote Processor control driver");