remoteproc: ingenic: Move clock handling to prepare/unprepare callbacks
This patch moves clock related operations to the remoteproc prepare()
and unprepare() callbacks so that the PM runtime framework doesn't
have to be involved needlessly. This provides a simpler approach and
requires less code.
Based on the work from Paul Cercueil published here:
https://lore.kernel.org/linux-remoteproc/20191116170846.67220-4-paul@crapouillou.net/
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200630163118.3830422-2-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/drivers/remoteproc/ingenic_rproc.c b/drivers/remoteproc/ingenic_rproc.c
index 189020d..1c2b21a 100644
--- a/drivers/remoteproc/ingenic_rproc.c
+++ b/drivers/remoteproc/ingenic_rproc.c
@@ -11,7 +11,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
#include <linux/remoteproc.h>
#include "remoteproc_internal.h"
@@ -62,6 +61,28 @@ struct vpu {
struct device *dev;
};
+static int ingenic_rproc_prepare(struct rproc *rproc)
+{
+ struct vpu *vpu = rproc->priv;
+ int ret;
+
+ /* The clocks must be enabled for the firmware to be loaded in TCSM */
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(vpu->clks), vpu->clks);
+ if (ret)
+ dev_err(vpu->dev, "Unable to start clocks: %d\n", ret);
+
+ return ret;
+}
+
+static int ingenic_rproc_unprepare(struct rproc *rproc)
+{
+ struct vpu *vpu = rproc->priv;
+
+ clk_bulk_disable_unprepare(ARRAY_SIZE(vpu->clks), vpu->clks);
+
+ return 0;
+}
+
static int ingenic_rproc_start(struct rproc *rproc)
{
struct vpu *vpu = rproc->priv;
@@ -115,6 +136,8 @@ static void *ingenic_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
}
static struct rproc_ops ingenic_rproc_ops = {
+ .prepare = ingenic_rproc_prepare,
+ .unprepare = ingenic_rproc_unprepare,
.start = ingenic_rproc_start,
.stop = ingenic_rproc_stop,
.kick = ingenic_rproc_kick,
@@ -135,16 +158,6 @@ static irqreturn_t vpu_interrupt(int irq, void *data)
return rproc_vq_interrupt(rproc, vring);
}
-static void ingenic_rproc_disable_clks(void *data)
-{
- struct vpu *vpu = data;
-
- pm_runtime_resume(vpu->dev);
- pm_runtime_disable(vpu->dev);
-
- clk_bulk_disable_unprepare(ARRAY_SIZE(vpu->clks), vpu->clks);
-}
-
static int ingenic_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -206,35 +219,13 @@ static int ingenic_rproc_probe(struct platform_device *pdev)
disable_irq(vpu->irq);
- /* The clocks must be enabled for the firmware to be loaded in TCSM */
- ret = clk_bulk_prepare_enable(ARRAY_SIZE(vpu->clks), vpu->clks);
- if (ret) {
- dev_err(dev, "Unable to start clocks\n");
- return ret;
- }
-
- pm_runtime_irq_safe(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
- pm_runtime_use_autosuspend(dev);
-
- ret = devm_add_action_or_reset(dev, ingenic_rproc_disable_clks, vpu);
- if (ret) {
- dev_err(dev, "Unable to register action\n");
- goto out_pm_put;
- }
-
ret = devm_rproc_add(dev, rproc);
if (ret) {
dev_err(dev, "Failed to register remote processor\n");
- goto out_pm_put;
+ return ret;
}
-out_pm_put:
- pm_runtime_put_autosuspend(dev);
-
- return ret;
+ return 0;
}
static const struct of_device_id ingenic_rproc_of_matches[] = {
@@ -243,33 +234,10 @@ static const struct of_device_id ingenic_rproc_of_matches[] = {
};
MODULE_DEVICE_TABLE(of, ingenic_rproc_of_matches);
-static int __maybe_unused ingenic_rproc_suspend(struct device *dev)
-{
- struct vpu *vpu = dev_get_drvdata(dev);
-
- clk_bulk_disable(ARRAY_SIZE(vpu->clks), vpu->clks);
-
- return 0;
-}
-
-static int __maybe_unused ingenic_rproc_resume(struct device *dev)
-{
- struct vpu *vpu = dev_get_drvdata(dev);
-
- return clk_bulk_enable(ARRAY_SIZE(vpu->clks), vpu->clks);
-}
-
-static const struct dev_pm_ops __maybe_unused ingenic_rproc_pm = {
- SET_RUNTIME_PM_OPS(ingenic_rproc_suspend, ingenic_rproc_resume, NULL)
-};
-
static struct platform_driver ingenic_rproc_driver = {
.probe = ingenic_rproc_probe,
.driver = {
.name = "ingenic-vpu",
-#ifdef CONFIG_PM
- .pm = &ingenic_rproc_pm,
-#endif
.of_match_table = ingenic_rproc_of_matches,
},
};