[PATCH] PIIX/SLC90E66: PIO mode fallback fix
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in
the Intel PIIX and SMsC SLC90E66 IDE drivers because:
- config_drive_for_dma() calls the hwif->speedproc() handler with a wrong
mode number (unbiased by XFER_PIO_0) in case of the PIO fallback;
- hwif->tuneproc() handler doesn't really set the drive's own speed (this
is not fixed as yet).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 4a1853a..9be7e49 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,9 +1,10 @@
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002
+ * linux/drivers/ide/pci/slc90e66.c Version 0.12 May 12, 2006
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
*
- * This a look-a-like variation of the ICH0 PIIX4 Ultra-66,
+ * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
* but this keeps the ISA-Bridge and slots alive.
*
*/
@@ -158,10 +159,8 @@
{
u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive));
- if (!(speed)) {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = slc90e66_dma_2_pio(XFER_PIO_0 + tspeed);
- }
+ if (!speed)
+ return 0;
(void) slc90e66_tune_chipset(drive, speed);
return ide_dma_enable(drive);
@@ -176,16 +175,15 @@
if (id && (id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (slc90e66_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
- hwif->tuneproc(drive, 5);
+ (void) hwif->speedproc(drive, XFER_PIO_0 +
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */