diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c
index 32db2ee..bbbfd19 100644
--- a/drivers/usb/gadget/fotg210-udc.c
+++ b/drivers/usb/gadget/fotg210-udc.c
@@ -1214,6 +1214,6 @@
 
 module_platform_driver(fotg210_driver);
 
-MODULE_AUTHOR("Yuan-Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index f1dd6da..b278abe 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -22,7 +22,7 @@
 
 MODULE_DESCRIPTION("FUSB300  USB gadget driver");
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
 MODULE_ALIAS("platform:fusb300_udc");
 
 #define DRIVER_VERSION	"20 October 2010"
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 947b009..4449f56 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -669,7 +669,7 @@
 	 * generic hardware linkage
 	 */
 	.irq = ehci_irq,
-	.flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+	.flags = HCD_USB2 | HCD_MEMORY,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index b52a66c..83ab51a 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -43,7 +43,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5d6022f..86ab9fd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1158,7 +1158,7 @@
 	 * generic hardware linkage
 	 */
 	.irq =			ehci_irq,
-	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags =		HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 417c10d..35cdbd8 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -96,7 +96,7 @@
 	 * generic hardware linkage
 	 */
 	.irq = ehci_irq,
-	.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags = HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index ab0397e..45cc001 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -51,7 +51,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 893b707..601e208 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -286,7 +286,7 @@
 #else
 	.irq =			ehci_irq,
 #endif
-	.flags =		HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags =		HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 6cc5567..932293f 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -28,7 +28,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 8188542..fd98377 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -71,7 +71,7 @@
 	.product_desc		= "PS3 EHCI Host Controller",
 	.hcd_priv_size		= sizeof(struct ehci_hcd),
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 	.reset			= ps3_ehci_hc_reset,
 	.start			= ehci_run,
 	.stop			= ehci_stop,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index e321804..a7f776a 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -247,6 +247,8 @@
 
 static void
 ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
+__releases(ehci->lock)
+__acquires(ehci->lock)
 {
 	if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
 		/* ... update hc-wide periodic stats */
@@ -272,8 +274,11 @@
 		urb->actual_length, urb->transfer_buffer_length);
 #endif
 
+	/* complete() can reenter this HCD */
 	usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+	spin_unlock (&ehci->lock);
 	usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
+	spin_lock (&ehci->lock);
 }
 
 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index 8a73449..b2de52d 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -55,7 +55,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index dc899eb..93e59a1 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -36,7 +36,7 @@
 	 * generic hardware linkage
 	 */
 	.irq				= ehci_irq,
-	.flags				= HCD_USB2 | HCD_MEMORY | HCD_BH,
+	.flags				= HCD_USB2 | HCD_MEMORY,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index 67026ff..cca4be9 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -61,7 +61,7 @@
 	 * Generic hardware linkage.
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * Basic lifecycle operations.
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index 1c370df..59e0e24 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -108,7 +108,7 @@
 	 * generic hardware linkage
 	 */
 	.irq = ehci_irq,
-	.flags = HCD_USB2|HCD_MEMORY|HCD_BH,
+	.flags = HCD_USB2|HCD_MEMORY,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 95979f9..eba962e 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -79,7 +79,7 @@
 	 * generic hardware linkage
 	 */
 	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
+	.flags			= HCD_MEMORY | HCD_USB2,
 
 	/*
 	 * basic lifecycle operations
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c454bfa..ddb9c51 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -60,7 +60,7 @@
 		- Suunto ANT+ USB device.
 		- Fundamental Software dongle.
 		- HP4x calculators
-		- a number of Motoroloa phones
+		- a number of Motorola phones
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
 		- Infineon Modem Flashloader USB interface
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e7a84f0..bedf8e4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -139,6 +139,7 @@
 	HX_TA,		/* HX(A) / X(A) / TA version  */ /* TODO: improve */
 	HXD_EA_RA_SA,	/* HXD / EA / RA / SA version */ /* TODO: improve */
 	TB,		/* TB version */
+	HX_CLONE,	/* Cheap and less functional clone of the HX chip */
 };
 /*
  * NOTE: don't know the difference between type 0 and type 1,
@@ -206,8 +207,23 @@
 		 * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
 		 */
 		if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
-			type = HX_TA;
-			type_str = "X/HX/TA";
+			/* Check if the device is a clone */
+			pl2303_vendor_read(0x9494, 0, serial, buf);
+			/*
+			 * NOTE: Not sure if this read is really needed.
+			 * The HX returns 0x00, the clone 0x02, but the Windows
+			 * driver seems to ignore the value and continues.
+			 */
+			pl2303_vendor_write(0x0606, 0xaa, serial);
+			pl2303_vendor_read(0x8686, 0, serial, buf);
+			if (buf[0] != 0xaa) {
+				type = HX_CLONE;
+				type_str = "X/HX clone (limited functionality)";
+			} else {
+				type = HX_TA;
+				type_str = "X/HX/TA";
+			}
+			pl2303_vendor_write(0x0606, 0x00, serial);
 		} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
 								     == 0x400) {
 			type = HXD_EA_RA_SA;
@@ -305,8 +321,9 @@
 {
 	/*
 	 * NOTE: Only the values defined in baud_sup are supported !
-	 *       => if unsupported values are set, the PL2303 seems to
-	 *	    use 9600 baud (at least my PL2303X always does)
+	 * => if unsupported values are set, the PL2303 uses 9600 baud instead
+	 * => HX clones just don't work at unsupported baud rates < 115200 baud,
+	 *    for baud rates > 115200 they run at 115200 baud
 	 */
 	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
 				 4800, 7200, 9600, 14400, 19200, 28800, 38400,
@@ -316,14 +333,14 @@
 	 * NOTE: With the exception of type_0/1 devices, the following
 	 * additional baud rates are supported (tested with HX rev. 3A only):
 	 * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
-	 * 403200, 806400.	(*: not HX)
+	 * 403200, 806400.	(*: not HX and HX clones)
 	 *
 	 * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
-	 *                 type_0+1: 1228800; RA: 921600; SA: 115200
+	 *                 type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
 	 *
 	 * As long as we are not using this encoding method for anything else
-	 * than the type_0+1 and HX chips, there is no point in complicating
-	 * the code to support them.
+	 * than the type_0+1, HX and HX clone chips, there is no point in
+	 * complicating the code to support them.
 	 */
 	int i;
 
@@ -347,6 +364,8 @@
 		baud = min_t(int, baud, 6000000);
 	else if (type == type_0 || type == type_1)
 		baud = min_t(int, baud, 1228800);
+	else if (type == HX_CLONE)
+		baud = min_t(int, baud, 115200);
 	/* Direct (standard) baud rate encoding method */
 	put_unaligned_le32(baud, buf);
 
@@ -359,7 +378,8 @@
 	/*
 	 * Divisor based baud rate encoding method
 	 *
-	 * NOTE: it's not clear if the type_0/1 chips support this method
+	 * NOTE: HX clones do NOT support this method.
+	 * It's not clear if the type_0/1 chips support it.
 	 *
 	 * divisor = 12MHz * 32 / baudrate = 2^A * B
 	 *
@@ -452,7 +472,7 @@
 	 * 1) Direct method: encodes the baud rate value directly
 	 *    => supported by all chip types
 	 * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
-	 *    => supported by HX chips (and likely not by type_0/1 chips)
+	 *    => not supported by HX clones (and likely type_0/1 chips)
 	 *
 	 * NOTE: Although the divisor based baud rate encoding method is much
 	 * more flexible, some of the standard baud rate values can not be
@@ -460,7 +480,7 @@
 	 * the device likely uses the same baud rate generator for both methods
 	 * so that there is likley no difference.
 	 */
-	if (type == type_0 || type == type_1)
+	if (type == type_0 || type == type_1 || type == HX_CLONE)
 		baud = pl2303_baudrate_encode_direct(baud, type, buf);
 	else
 		baud = pl2303_baudrate_encode_divisor(baud, type, buf);
@@ -813,6 +833,7 @@
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
+	/* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
 	if (result)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }