dt-bindings: mmc: tegra: Reformat compatible string list
The list of compatible strings is somewhat difficult to read and extend.
Reformat it into a list to make it more easily extensible.
While at it, also remove the "plus one of the above" clause because it
isn't actually valid.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 15b8368..c15aa22 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -7,11 +7,12 @@
by mmc.txt and the properties used by the sdhci-tegra driver.
Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci".
- For Tegra30, must contain "nvidia,tegra30-sdhci". For Tegra114,
- must contain "nvidia,tegra114-sdhci". For Tegra124, must contain
- "nvidia,tegra124-sdhci". Otherwise, must contain "nvidia,<chip>-sdhci",
- plus one of the above, where <chip> is tegra132 or tegra210.
+- compatible : should be one of:
+ - "nvidia,tegra20-sdhci": for Tegra20
+ - "nvidia,tegra30-sdhci": for Tegra30
+ - "nvidia,tegra114-sdhci": for Tegra114
+ - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
+ - "nvidia,tegra210-sdhci": for Tegra210
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.