usb: hub: Move hub_port_disable() to fix warning if PM is disabled
If CONFIG_PM=n:
drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called
drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here
To fix this, move hub_port_disable() after
hub_usb3_port_prepare_disable(), and adjust forward declarations.
Fixes: 37be66767e3cae4f ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1fa5c0f..a56c75e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
- struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
@@ -903,34 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
}
/*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *hdev = hub->hdev;
- int ret = 0;
-
- if (!hub->error) {
- if (hub_is_superspeed(hub->hdev)) {
- hub_usb3_port_prepare_disable(hub, port_dev);
- ret = hub_set_port_link_state(hub, port_dev->portnum,
- USB_SS_PORT_LS_U3);
- } else {
- ret = usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_ENABLE);
- }
- }
- if (port_dev->child && set_state)
- usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
- if (ret && ret != -ENODEV)
- dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
- return ret;
-}
-
-/*
* Disable a port and mark a logical connect-change event, so that some
* time later hub_wq will disconnect() any existing usb_device on the port
* and will re-enumerate if there actually is a device attached.
@@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
#endif /* CONFIG_PM */
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+ int ret = 0;
+
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev)) {
+ hub_usb3_port_prepare_disable(hub, port_dev);
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U3);
+ } else {
+ ret = usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
+ }
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+ if (ret && ret != -ENODEV)
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+ return ret;
+}
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*