/spare/repo/netdev-2.6 branch 'chelsio'
diff --git a/MAINTAINERS b/MAINTAINERS
index 564a03e..e8214fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2092,6 +2092,12 @@
W: http://www.simtec.co.uk/products/EB2410ITX/
S: Supported
+SIS 190 ETHERNET DRIVER
+P: Francois Romieu
+M: romieu@fr.zoreil.com
+L: netdev@vger.kernel.org
+S: Maintained
+
SIS 5513 IDE CONTROLLER DRIVER
P: Lionel Bouton
M: Lionel.Bouton@inet6.fr
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a6a441b..e0239a1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1923,6 +1923,17 @@
If in doubt, say Y.
+config SIS190
+ tristate "SiS190 gigabit ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sis190. This is recommended.
+
config SKGE
tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 954d262..5baafcd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -43,6 +43,7 @@
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_ACENIC) += acenic.o
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index d0fa244..25cc20e 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1,7 +1,7 @@
/*******************************************************************************
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
@@ -156,7 +156,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.8-k2"DRV_EXT
+#define DRV_VERSION "3.4.14-k2"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -785,6 +785,7 @@
}
#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
{
unsigned long flags;
@@ -798,7 +799,7 @@
if(likely(!readb(&nic->csr->scb.cmd_lo)))
break;
cpu_relax();
- if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1)))
+ if(unlikely(i > E100_WAIT_SCB_FAST))
udelay(5);
}
if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
@@ -902,8 +903,8 @@
static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1006,25 +1007,213 @@
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
- int i;
- static const u32 ucode[UCODE_SIZE] = {
- /* NFS packets are misinterpreted as TCO packets and
- * incorrectly routed to the BMC over SMBus. This
- * microcode patch checks the fragmented IP bit in the
- * NFS/UDP header to distinguish between NFS and TCO. */
- 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
- 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
- 0x00906EFD, 0x00900EFD, 0x00E00EF8,
- };
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
- if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
- for(i = 0; i < UCODE_SIZE; i++)
- cb->u.ucode[i] = cpu_to_le32(ucode[i]);
- cb->command = cpu_to_le16(cb_ucode);
- } else
- cb->command = cpu_to_le16(cb_nop);
+#define BUNDLESMALL 1
+#define BUNDLEMAX 50
+#define INTDELAY 15000
+
+ opts = ucode_opts;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return;
+
+ /* Search for ucode match against h/w rev_id */
+ while (opts->mac) {
+ if (nic->mac == opts->mac) {
+ int i;
+ u32 *ucode = opts->ucode;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |=
+ (u16) INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= (u16) BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |=
+ (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+ for(i = 0; i < UCODE_SIZE; i++)
+ cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+ cb->command = cpu_to_le16(cb_ucode);
+ return;
+ }
+ opts++;
+ }
+
+ cb->command = cpu_to_le16(cb_nop);
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
@@ -1307,14 +1496,15 @@
{
cb->command = nic->tx_command;
/* interrupt every 16 packets regardless of delay */
- if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i;
+ if((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
cb->u.tcb.tcb_byte_count = 0;
cb->u.tcb.threshold = nic->tx_threshold;
cb->u.tcb.tbd_count = 1;
cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
skb->data, skb->len, PCI_DMA_TODEVICE));
- // check for mapping failure?
+ /* check for mapping failure? */
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
}
@@ -1539,7 +1729,7 @@
/* Don't indicate if hardware indicates errors */
nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
- } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) {
+ } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
/* Don't indicate oversized frames */
nic->rx_over_length_errors++;
nic->net_stats.rx_dropped++;
@@ -1706,6 +1896,7 @@
static void e100_netpoll(struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
+
e100_disable_irq(nic);
e100_intr(nic->pdev->irq, netdev, NULL);
e100_tx_clean(nic);
@@ -2108,6 +2299,8 @@
}
for(i = 0; i < E100_TEST_LEN; i++)
test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
}
static int e100_phys_id(struct net_device *netdev, u32 data)
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
new file mode 100644
index 0000000..bf3440a
--- /dev/null
+++ b/drivers/net/sis190.c
@@ -0,0 +1,1843 @@
+/*
+ sis190.c: Silicon Integrated Systems SiS190 ethernet driver
+
+ Copyright (c) 2003 K.M. Liu <kmliu@sis.com>
+ Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com>
+ Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com>
+
+ Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191
+ genuine driver.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ See the file COPYING in this distribution for more information.
+
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <asm/irq.h>
+
+#define net_drv(p, arg...) if (netif_msg_drv(p)) \
+ printk(arg)
+#define net_probe(p, arg...) if (netif_msg_probe(p)) \
+ printk(arg)
+#define net_link(p, arg...) if (netif_msg_link(p)) \
+ printk(arg)
+#define net_intr(p, arg...) if (netif_msg_intr(p)) \
+ printk(arg)
+#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \
+ printk(arg)
+
+#define PHY_MAX_ADDR 32
+#define PHY_ID_ANY 0x1f
+#define MII_REG_ANY 0x1f
+
+#ifdef CONFIG_SIS190_NAPI
+#define NAPI_SUFFIX "-NAPI"
+#else
+#define NAPI_SUFFIX ""
+#endif
+
+#define DRV_VERSION "1.2" NAPI_SUFFIX
+#define DRV_NAME "sis190"
+#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+#ifdef CONFIG_SIS190_NAPI
+#define sis190_rx_skb netif_receive_skb
+#define sis190_rx_quota(count, quota) min(count, quota)
+#else
+#define sis190_rx_skb netif_rx
+#define sis190_rx_quota(count, quota) count
+#endif
+
+#define MAC_ADDR_LEN 6
+
+#define NUM_TX_DESC 64 /* [8..1024] */
+#define NUM_RX_DESC 64 /* [8..8192] */
+#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
+#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
+#define RX_BUF_SIZE 1536
+#define RX_BUF_MASK 0xfff8
+
+#define SIS190_REGS_SIZE 0x80
+#define SIS190_TX_TIMEOUT (6*HZ)
+#define SIS190_PHY_TIMEOUT (10*HZ)
+#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+ NETIF_MSG_IFDOWN)
+
+/* Enhanced PHY access register bit definitions */
+#define EhnMIIread 0x0000
+#define EhnMIIwrite 0x0020
+#define EhnMIIdataShift 16
+#define EhnMIIpmdShift 6 /* 7016 only */
+#define EhnMIIregShift 11
+#define EhnMIIreq 0x0010
+#define EhnMIInotDone 0x0010
+
+/* Write/read MMIO register */
+#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg))
+#define SIS_W16(reg, val) writew ((val), ioaddr + (reg))
+#define SIS_W32(reg, val) writel ((val), ioaddr + (reg))
+#define SIS_R8(reg) readb (ioaddr + (reg))
+#define SIS_R16(reg) readw (ioaddr + (reg))
+#define SIS_R32(reg) readl (ioaddr + (reg))
+
+#define SIS_PCI_COMMIT() SIS_R32(IntrControl)
+
+enum sis190_registers {
+ TxControl = 0x00,
+ TxDescStartAddr = 0x04,
+ rsv0 = 0x08, // reserved
+ TxSts = 0x0c, // unused (Control/Status)
+ RxControl = 0x10,
+ RxDescStartAddr = 0x14,
+ rsv1 = 0x18, // reserved
+ RxSts = 0x1c, // unused
+ IntrStatus = 0x20,
+ IntrMask = 0x24,
+ IntrControl = 0x28,
+ IntrTimer = 0x2c, // unused (Interupt Timer)
+ PMControl = 0x30, // unused (Power Mgmt Control/Status)
+ rsv2 = 0x34, // reserved
+ ROMControl = 0x38,
+ ROMInterface = 0x3c,
+ StationControl = 0x40,
+ GMIIControl = 0x44,
+ GIoCR = 0x48, // unused (GMAC IO Compensation)
+ GIoCtrl = 0x4c, // unused (GMAC IO Control)
+ TxMacControl = 0x50,
+ TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit)
+ RGDelay = 0x58, // unused (RGMII Tx Internal Delay)
+ rsv3 = 0x5c, // reserved
+ RxMacControl = 0x60,
+ RxMacAddr = 0x62,
+ RxHashTable = 0x68,
+ // Undocumented = 0x6c,
+ RxWolCtrl = 0x70,
+ RxWolData = 0x74, // unused (Rx WOL Data Access)
+ RxMPSControl = 0x78, // unused (Rx MPS Control)
+ rsv4 = 0x7c, // reserved
+};
+
+enum sis190_register_content {
+ /* IntrStatus */
+ SoftInt = 0x40000000, // unused
+ Timeup = 0x20000000, // unused
+ PauseFrame = 0x00080000, // unused
+ MagicPacket = 0x00040000, // unused
+ WakeupFrame = 0x00020000, // unused
+ LinkChange = 0x00010000,
+ RxQEmpty = 0x00000080,
+ RxQInt = 0x00000040,
+ TxQ1Empty = 0x00000020, // unused
+ TxQ1Int = 0x00000010,
+ TxQ0Empty = 0x00000008, // unused
+ TxQ0Int = 0x00000004,
+ RxHalt = 0x00000002,
+ TxHalt = 0x00000001,
+
+ /* {Rx/Tx}CmdBits */
+ CmdReset = 0x10,
+ CmdRxEnb = 0x08, // unused
+ CmdTxEnb = 0x01,
+ RxBufEmpty = 0x01, // unused
+
+ /* Cfg9346Bits */
+ Cfg9346_Lock = 0x00, // unused
+ Cfg9346_Unlock = 0xc0, // unused
+
+ /* RxMacControl */
+ AcceptErr = 0x20, // unused
+ AcceptRunt = 0x10, // unused
+ AcceptBroadcast = 0x0800,
+ AcceptMulticast = 0x0400,
+ AcceptMyPhys = 0x0200,
+ AcceptAllPhys = 0x0100,
+
+ /* RxConfigBits */
+ RxCfgFIFOShift = 13,
+ RxCfgDMAShift = 8, // 0x1a in RxControl ?
+
+ /* TxConfigBits */
+ TxInterFrameGapShift = 24,
+ TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+
+ /* StationControl */
+ _1000bpsF = 0x1c00,
+ _1000bpsH = 0x0c00,
+ _100bpsF = 0x1800,
+ _100bpsH = 0x0800,
+ _10bpsF = 0x1400,
+ _10bpsH = 0x0400,
+
+ LinkStatus = 0x02, // unused
+ FullDup = 0x01, // unused
+
+ /* TBICSRBit */
+ TBILinkOK = 0x02000000, // unused
+};
+
+struct TxDesc {
+ __le32 PSize;
+ __le32 status;
+ __le32 addr;
+ __le32 size;
+};
+
+struct RxDesc {
+ __le32 PSize;
+ __le32 status;
+ __le32 addr;
+ __le32 size;
+};
+
+enum _DescStatusBit {
+ /* _Desc.status */
+ OWNbit = 0x80000000, // RXOWN/TXOWN
+ INTbit = 0x40000000, // RXINT/TXINT
+ CRCbit = 0x00020000, // CRCOFF/CRCEN
+ PADbit = 0x00010000, // PREADD/PADEN
+ /* _Desc.size */
+ RingEnd = 0x80000000,
+ /* TxDesc.status */
+ LSEN = 0x08000000, // TSO ? -- FR
+ IPCS = 0x04000000,
+ TCPCS = 0x02000000,
+ UDPCS = 0x01000000,
+ BSTEN = 0x00800000,
+ EXTEN = 0x00400000,
+ DEFEN = 0x00200000,
+ BKFEN = 0x00100000,
+ CRSEN = 0x00080000,
+ COLEN = 0x00040000,
+ THOL3 = 0x30000000,
+ THOL2 = 0x20000000,
+ THOL1 = 0x10000000,
+ THOL0 = 0x00000000,
+ /* RxDesc.status */
+ IPON = 0x20000000,
+ TCPON = 0x10000000,
+ UDPON = 0x08000000,
+ Wakup = 0x00400000,
+ Magic = 0x00200000,
+ Pause = 0x00100000,
+ DEFbit = 0x00200000,
+ BCAST = 0x000c0000,
+ MCAST = 0x00080000,
+ UCAST = 0x00040000,
+ /* RxDesc.PSize */
+ TAGON = 0x80000000,
+ RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR
+ ABORT = 0x00800000,
+ SHORT = 0x00400000,
+ LIMIT = 0x00200000,
+ MIIER = 0x00100000,
+ OVRUN = 0x00080000,
+ NIBON = 0x00040000,
+ COLON = 0x00020000,
+ CRCOK = 0x00010000,
+ RxSizeMask = 0x0000ffff
+ /*
+ * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
+ * provide two (unused with Linux) Tx queues. No publically
+ * available documentation alas.
+ */
+};
+
+enum sis190_eeprom_access_register_bits {
+ EECS = 0x00000001, // unused
+ EECLK = 0x00000002, // unused
+ EEDO = 0x00000008, // unused
+ EEDI = 0x00000004, // unused
+ EEREQ = 0x00000080,
+ EEROP = 0x00000200,
+ EEWOP = 0x00000100 // unused
+};
+
+/* EEPROM Addresses */
+enum sis190_eeprom_address {
+ EEPROMSignature = 0x00,
+ EEPROMCLK = 0x01, // unused
+ EEPROMInfo = 0x02,
+ EEPROMMACAddr = 0x03
+};
+
+struct sis190_private {
+ void __iomem *mmio_addr;
+ struct pci_dev *pci_dev;
+ struct net_device_stats stats;
+ spinlock_t lock;
+ u32 rx_buf_sz;
+ u32 cur_rx;
+ u32 cur_tx;
+ u32 dirty_rx;
+ u32 dirty_tx;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ struct RxDesc *RxDescRing;
+ struct TxDesc *TxDescRing;
+ struct sk_buff *Rx_skbuff[NUM_RX_DESC];
+ struct sk_buff *Tx_skbuff[NUM_TX_DESC];
+ struct work_struct phy_task;
+ struct timer_list timer;
+ u32 msg_enable;
+ struct mii_if_info mii_if;
+ struct list_head first_phy;
+};
+
+struct sis190_phy {
+ struct list_head list;
+ int phy_id;
+ u16 id[2];
+ u16 status;
+ u8 type;
+};
+
+enum sis190_phy_type {
+ UNKNOWN = 0x00,
+ HOME = 0x01,
+ LAN = 0x02,
+ MIX = 0x03
+};
+
+static struct mii_chip_info {
+ const char *name;
+ u16 id[2];
+ unsigned int type;
+} mii_chip_table[] = {
+ { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN },
+ { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN },
+ { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN },
+ { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN },
+ { NULL, }
+};
+
+const static struct {
+ const char *name;
+ u8 version; /* depend on docs */
+ u32 RxConfigMask; /* clear the bits supported by this chip */
+} sis_chip_info[] = {
+ { DRV_NAME, 0x00, 0xff7e1880, },
+};
+
+static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sis190_pci_tbl);
+
+static int rx_copybreak = 200;
+
+static struct {
+ u32 msg_enable;
+} debug = { -1 };
+
+MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+static const u32 sis190_intr_mask =
+ RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt;
+
+/*
+ * Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static int multicast_filter_limit = 32;
+
+static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
+{
+ unsigned int i;
+
+ SIS_W32(GMIIControl, ctl);
+
+ msleep(1);
+
+ for (i = 0; i < 100; i++) {
+ if (!(SIS_R32(GMIIControl) & EhnMIInotDone))
+ break;
+ msleep(1);
+ }
+
+ if (i > 999)
+ printk(KERN_ERR PFX "PHY command failed !\n");
+}
+
+static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
+{
+ __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite |
+ (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) |
+ (((u32) val) << EhnMIIdataShift));
+}
+
+static int mdio_read(void __iomem *ioaddr, int phy_id, int reg)
+{
+ __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread |
+ (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift));
+
+ return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift);
+}
+
+static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ mdio_write(tp->mmio_addr, phy_id, reg, val);
+}
+
+static int __mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mdio_read(tp->mmio_addr, phy_id, reg);
+}
+
+static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg)
+{
+ mdio_read(ioaddr, phy_id, reg);
+ return mdio_read(ioaddr, phy_id, reg);
+}
+
+static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg)
+{
+ u16 data = 0xffff;
+ unsigned int i;
+
+ if (!(SIS_R32(ROMControl) & 0x0002))
+ return 0;
+
+ SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10));
+
+ for (i = 0; i < 200; i++) {
+ if (!(SIS_R32(ROMInterface) & EEREQ)) {
+ data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16;
+ break;
+ }
+ msleep(1);
+ }
+
+ return data;
+}
+
+static void sis190_irq_mask_and_ack(void __iomem *ioaddr)
+{
+ SIS_W32(IntrMask, 0x00);
+ SIS_W32(IntrStatus, 0xffffffff);
+ SIS_PCI_COMMIT();
+}
+
+static void sis190_asic_down(void __iomem *ioaddr)
+{
+ /* Stop the chip's Tx and Rx DMA processes. */
+
+ SIS_W32(TxControl, 0x1a00);
+ SIS_W32(RxControl, 0x1a00);
+
+ sis190_irq_mask_and_ack(ioaddr);
+}
+
+static void sis190_mark_as_last_descriptor(struct RxDesc *desc)
+{
+ desc->size |= cpu_to_le32(RingEnd);
+}
+
+static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+ u32 eor = le32_to_cpu(desc->size) & RingEnd;
+
+ desc->PSize = 0x0;
+ desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor);
+ wmb();
+ desc->status = cpu_to_le32(OWNbit | INTbit);
+}
+
+static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+ u32 rx_buf_sz)
+{
+ desc->addr = cpu_to_le32(mapping);
+ sis190_give_to_asic(desc, rx_buf_sz);
+}
+
+static inline void sis190_make_unusable_by_asic(struct RxDesc *desc)
+{
+ desc->PSize = 0x0;
+ desc->addr = 0xdeadbeef;
+ desc->size &= cpu_to_le32(RingEnd);
+ wmb();
+ desc->status = 0x0;
+}
+
+static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff,
+ struct RxDesc *desc, u32 rx_buf_sz)
+{
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ int ret = 0;
+
+ skb = dev_alloc_skb(rx_buf_sz);
+ if (!skb)
+ goto err_out;
+
+ *sk_buff = skb;
+
+ mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ sis190_map_to_asic(desc, mapping, rx_buf_sz);
+out:
+ return ret;
+
+err_out:
+ ret = -ENOMEM;
+ sis190_make_unusable_by_asic(desc);
+ goto out;
+}
+
+static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev,
+ u32 start, u32 end)
+{
+ u32 cur;
+
+ for (cur = start; cur < end; cur++) {
+ int ret, i = cur % NUM_RX_DESC;
+
+ if (tp->Rx_skbuff[i])
+ continue;
+
+ ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i,
+ tp->RxDescRing + i, tp->rx_buf_sz);
+ if (ret < 0)
+ break;
+ }
+ return cur - start;
+}
+
+static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size,
+ struct RxDesc *desc, int rx_buf_sz)
+{
+ int ret = -1;
+
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
+ if (skb) {
+ skb_reserve(skb, NET_IP_ALIGN);
+ eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
+ *sk_buff = skb;
+ sis190_give_to_asic(desc, rx_buf_sz);
+ ret = 0;
+ }
+ }
+ return ret;
+}
+
+static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats)
+{
+#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT)
+
+ if ((status & CRCOK) && !(status & ErrMask))
+ return 0;
+
+ if (!(status & CRCOK))
+ stats->rx_crc_errors++;
+ else if (status & OVRUN)
+ stats->rx_over_errors++;
+ else if (status & (SHORT | LIMIT))
+ stats->rx_length_errors++;
+ else if (status & (MIIER | NIBON | COLON))
+ stats->rx_frame_errors++;
+
+ stats->rx_errors++;
+ return -1;
+}
+
+static int sis190_rx_interrupt(struct net_device *dev,
+ struct sis190_private *tp, void __iomem *ioaddr)
+{
+ struct net_device_stats *stats = &tp->stats;
+ u32 rx_left, cur_rx = tp->cur_rx;
+ u32 delta, count;
+
+ rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+ rx_left = sis190_rx_quota(rx_left, (u32) dev->quota);
+
+ for (; rx_left > 0; rx_left--, cur_rx++) {
+ unsigned int entry = cur_rx % NUM_RX_DESC;
+ struct RxDesc *desc = tp->RxDescRing + entry;
+ u32 status;
+
+ if (desc->status & OWNbit)
+ break;
+
+ status = le32_to_cpu(desc->PSize);
+
+ // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
+ // status);
+
+ if (sis190_rx_pkt_err(status, stats) < 0)
+ sis190_give_to_asic(desc, tp->rx_buf_sz);
+ else {
+ struct sk_buff *skb = tp->Rx_skbuff[entry];
+ int pkt_size = (status & RxSizeMask) - 4;
+ void (*pci_action)(struct pci_dev *, dma_addr_t,
+ size_t, int) = pci_dma_sync_single_for_device;
+
+ if (unlikely(pkt_size > tp->rx_buf_sz)) {
+ net_intr(tp, KERN_INFO
+ "%s: (frag) status = %08x.\n",
+ dev->name, status);
+ stats->rx_dropped++;
+ stats->rx_length_errors++;
+ sis190_give_to_asic(desc, tp->rx_buf_sz);
+ continue;
+ }
+
+ pci_dma_sync_single_for_cpu(tp->pci_dev,
+ le32_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ if (sis190_try_rx_copy(&skb, pkt_size, desc,
+ tp->rx_buf_sz)) {
+ pci_action = pci_unmap_single;
+ tp->Rx_skbuff[entry] = NULL;
+ sis190_make_unusable_by_asic(desc);
+ }
+
+ pci_action(tp->pci_dev, le32_to_cpu(desc->addr),
+ tp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+
+ skb->dev = dev;
+ skb_put(skb, pkt_size);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ sis190_rx_skb(skb);
+
+ dev->last_rx = jiffies;
+ stats->rx_packets++;
+ stats->rx_bytes += pkt_size;
+ if ((status & BCAST) == MCAST)
+ stats->multicast++;
+ }
+ }
+ count = cur_rx - tp->cur_rx;
+ tp->cur_rx = cur_rx;
+
+ delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ if (!delta && count && netif_msg_intr(tp))
+ printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+ tp->dirty_rx += delta;
+
+ if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
+ printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+
+ return count;
+}
+
+static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb,
+ struct TxDesc *desc)
+{
+ unsigned int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+ pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+
+ memset(desc, 0x00, sizeof(*desc));
+}
+
+static void sis190_tx_interrupt(struct net_device *dev,
+ struct sis190_private *tp, void __iomem *ioaddr)
+{
+ u32 pending, dirty_tx = tp->dirty_tx;
+ /*
+ * It would not be needed if queueing was allowed to be enabled
+ * again too early (hint: think preempt and unclocked smp systems).
+ */
+ unsigned int queue_stopped;
+
+ smp_rmb();
+ pending = tp->cur_tx - dirty_tx;
+ queue_stopped = (pending == NUM_TX_DESC);
+
+ for (; pending; pending--, dirty_tx++) {
+ unsigned int entry = dirty_tx % NUM_TX_DESC;
+ struct TxDesc *txd = tp->TxDescRing + entry;
+ struct sk_buff *skb;
+
+ if (le32_to_cpu(txd->status) & OWNbit)
+ break;
+
+ skb = tp->Tx_skbuff[entry];
+
+ tp->stats.tx_packets++;
+ tp->stats.tx_bytes += skb->len;
+
+ sis190_unmap_tx_skb(tp->pci_dev, skb, txd);
+ tp->Tx_skbuff[entry] = NULL;
+ dev_kfree_skb_irq(skb);
+ }
+
+ if (tp->dirty_tx != dirty_tx) {
+ tp->dirty_tx = dirty_tx;
+ smp_wmb();
+ if (queue_stopped)
+ netif_wake_queue(dev);
+ }
+}
+
+/*
+ * The interrupt handler does all of the Rx thread work and cleans up after
+ * the Tx thread.
+ */
+static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs)
+{
+ struct net_device *dev = __dev;
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int handled = 0;
+ u32 status;
+
+ status = SIS_R32(IntrStatus);
+
+ if ((status == 0xffffffff) || !status)
+ goto out;
+
+ handled = 1;
+
+ if (unlikely(!netif_running(dev))) {
+ sis190_asic_down(ioaddr);
+ goto out;
+ }
+
+ SIS_W32(IntrStatus, status);
+
+ // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+
+ if (status & LinkChange) {
+ net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+ schedule_work(&tp->phy_task);
+ }
+
+ if (status & RxQInt)
+ sis190_rx_interrupt(dev, tp, ioaddr);
+
+ if (status & TxQ0Int)
+ sis190_tx_interrupt(dev, tp, ioaddr);
+out:
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis190_netpoll(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ disable_irq(pdev->irq);
+ sis190_interrupt(pdev->irq, dev, NULL);
+ enable_irq(pdev->irq);
+}
+#endif
+
+static void sis190_free_rx_skb(struct sis190_private *tp,
+ struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+
+ pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(*sk_buff);
+ *sk_buff = NULL;
+ sis190_make_unusable_by_asic(desc);
+}
+
+static void sis190_rx_clear(struct sis190_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (!tp->Rx_skbuff[i])
+ continue;
+ sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i);
+ }
+}
+
+static void sis190_init_ring_indexes(struct sis190_private *tp)
+{
+ tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int sis190_init_ring(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ sis190_init_ring_indexes(tp);
+
+ memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *));
+ memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+ if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ goto err_rx_clear;
+
+ sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1);
+
+ return 0;
+
+err_rx_clear:
+ sis190_rx_clear(tp);
+ return -ENOMEM;
+}
+
+static void sis190_set_rx_mode(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned long flags;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ u16 rx_mode;
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Unconditionally log net taps. */
+ net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+ dev->name);
+ rx_mode =
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else if ((dev->mc_count > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+ } else {
+ struct dev_mc_list *mclist;
+ unsigned int i;
+
+ rx_mode = AcceptBroadcast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0;
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ int bit_nr =
+ ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ rx_mode |= AcceptMulticast;
+ }
+ }
+
+ spin_lock_irqsave(&tp->lock, flags);
+
+ SIS_W16(RxMacControl, rx_mode | 0x2);
+ SIS_W32(RxHashTable, mc_filter[0]);
+ SIS_W32(RxHashTable + 4, mc_filter[1]);
+
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static void sis190_soft_reset(void __iomem *ioaddr)
+{
+ SIS_W32(IntrControl, 0x8000);
+ SIS_PCI_COMMIT();
+ msleep(1);
+ SIS_W32(IntrControl, 0x0);
+ sis190_asic_down(ioaddr);
+ msleep(1);
+}
+
+static void sis190_hw_start(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ sis190_soft_reset(ioaddr);
+
+ SIS_W32(TxDescStartAddr, tp->tx_dma);
+ SIS_W32(RxDescStartAddr, tp->rx_dma);
+
+ SIS_W32(IntrStatus, 0xffffffff);
+ SIS_W32(IntrMask, 0x0);
+ /*
+ * Default is 100Mbps.
+ * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09
+ */
+ SIS_W16(StationControl, 0x1901);
+ SIS_W32(GMIIControl, 0x0);
+ SIS_W32(TxMacControl, 0x60);
+ SIS_W16(RxMacControl, 0x02);
+ SIS_W32(RxHashTable, 0x0);
+ SIS_W32(0x6c, 0x0);
+ SIS_W32(RxWolCtrl, 0x0);
+ SIS_W32(RxWolData, 0x0);
+
+ SIS_PCI_COMMIT();
+
+ sis190_set_rx_mode(dev);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ SIS_W32(IntrMask, sis190_intr_mask);
+
+ SIS_W32(TxControl, 0x1a00 | CmdTxEnb);
+ SIS_W32(RxControl, 0x1a1d);
+
+ netif_start_queue(dev);
+}
+
+static void sis190_phy_task(void * data)
+{
+ struct net_device *dev = data;
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id = tp->mii_if.phy_id;
+ u16 val;
+
+ rtnl_lock();
+
+ val = mdio_read(ioaddr, phy_id, MII_BMCR);
+ if (val & BMCR_RESET) {
+ // FIXME: needlessly high ? -- FR 02/07/2005
+ mod_timer(&tp->timer, jiffies + HZ/10);
+ } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
+ BMSR_ANEGCOMPLETE)) {
+ net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n",
+ dev->name);
+ mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET);
+ mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
+ } else {
+ /* Rejoice ! */
+ struct {
+ int val;
+ const char *msg;
+ u16 ctl;
+ } reg31[] = {
+ { LPA_1000XFULL | LPA_SLCT,
+ "1000 Mbps Full Duplex",
+ 0x01 | _1000bpsF },
+ { LPA_1000XHALF | LPA_SLCT,
+ "1000 Mbps Half Duplex",
+ 0x01 | _1000bpsH },
+ { LPA_100FULL,
+ "100 Mbps Full Duplex",
+ 0x01 | _100bpsF },
+ { LPA_100HALF,
+ "100 Mbps Half Duplex",
+ 0x01 | _100bpsH },
+ { LPA_10FULL,
+ "10 Mbps Full Duplex",
+ 0x01 | _10bpsF },
+ { LPA_10HALF,
+ "10 Mbps Half Duplex",
+ 0x01 | _10bpsH },
+ { 0, "unknown", 0x0000 }
+ }, *p;
+ u16 adv;
+
+ val = mdio_read(ioaddr, phy_id, 0x1f);
+ net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+
+ val = mdio_read(ioaddr, phy_id, MII_LPA);
+ adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+ net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n",
+ dev->name, val, adv);
+
+ val &= adv;
+
+ for (p = reg31; p->ctl; p++) {
+ if ((val & p->val) == p->val)
+ break;
+ }
+ if (p->ctl)
+ SIS_W16(StationControl, p->ctl);
+ net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
+ p->msg);
+ netif_carrier_on(dev);
+ }
+
+ rtnl_unlock();
+}
+
+static void sis190_phy_timer(unsigned long __opaque)
+{
+ struct net_device *dev = (struct net_device *)__opaque;
+ struct sis190_private *tp = netdev_priv(dev);
+
+ if (likely(netif_running(dev)))
+ schedule_work(&tp->phy_task);
+}
+
+static inline void sis190_delete_timer(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ del_timer_sync(&tp->timer);
+}
+
+static inline void sis190_request_timer(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct timer_list *timer = &tp->timer;
+
+ init_timer(timer);
+ timer->expires = jiffies + SIS190_PHY_TIMEOUT;
+ timer->data = (unsigned long)dev;
+ timer->function = sis190_phy_timer;
+ add_timer(timer);
+}
+
+static void sis190_set_rxbufsize(struct sis190_private *tp,
+ struct net_device *dev)
+{
+ unsigned int mtu = dev->mtu;
+
+ tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+ /* RxDesc->size has a licence to kill the lower bits */
+ if (tp->rx_buf_sz & 0x07) {
+ tp->rx_buf_sz += 8;
+ tp->rx_buf_sz &= RX_BUF_MASK;
+ }
+}
+
+static int sis190_open(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+ int rc = -ENOMEM;
+
+ sis190_set_rxbufsize(tp, dev);
+
+ /*
+ * Rx and Tx descriptors need 256 bytes alignment.
+ * pci_alloc_consistent() guarantees a stronger alignment.
+ */
+ tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma);
+ if (!tp->TxDescRing)
+ goto out;
+
+ tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma);
+ if (!tp->RxDescRing)
+ goto err_free_tx_0;
+
+ rc = sis190_init_ring(dev);
+ if (rc < 0)
+ goto err_free_rx_1;
+
+ INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+ sis190_request_timer(dev);
+
+ rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev);
+ if (rc < 0)
+ goto err_release_timer_2;
+
+ sis190_hw_start(dev);
+out:
+ return rc;
+
+err_release_timer_2:
+ sis190_delete_timer(dev);
+ sis190_rx_clear(tp);
+err_free_rx_1:
+ pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing,
+ tp->rx_dma);
+err_free_tx_0:
+ pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing,
+ tp->tx_dma);
+ goto out;
+}
+
+static void sis190_tx_clear(struct sis190_private *tp)
+{
+ unsigned int i;
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ struct sk_buff *skb = tp->Tx_skbuff[i];
+
+ if (!skb)
+ continue;
+
+ sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i);
+ tp->Tx_skbuff[i] = NULL;
+ dev_kfree_skb(skb);
+
+ tp->stats.tx_dropped++;
+ }
+ tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void sis190_down(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ unsigned int poll_locked = 0;
+
+ sis190_delete_timer(dev);
+
+ netif_stop_queue(dev);
+
+ flush_scheduled_work();
+
+ do {
+ spin_lock_irq(&tp->lock);
+
+ sis190_asic_down(ioaddr);
+
+ spin_unlock_irq(&tp->lock);
+
+ synchronize_irq(dev->irq);
+
+ if (!poll_locked) {
+ netif_poll_disable(dev);
+ poll_locked++;
+ }
+
+ synchronize_sched();
+
+ } while (SIS_R32(IntrMask));
+
+ sis190_tx_clear(tp);
+ sis190_rx_clear(tp);
+}
+
+static int sis190_close(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *pdev = tp->pci_dev;
+
+ sis190_down(dev);
+
+ free_irq(dev->irq, dev);
+
+ netif_poll_enable(dev);
+
+ pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma);
+ pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma);
+
+ tp->TxDescRing = NULL;
+ tp->RxDescRing = NULL;
+
+ return 0;
+}
+
+static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u32 len, entry, dirty_tx;
+ struct TxDesc *desc;
+ dma_addr_t mapping;
+
+ if (unlikely(skb->len < ETH_ZLEN)) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (!skb) {
+ tp->stats.tx_dropped++;
+ goto out;
+ }
+ len = ETH_ZLEN;
+ } else {
+ len = skb->len;
+ }
+
+ entry = tp->cur_tx % NUM_TX_DESC;
+ desc = tp->TxDescRing + entry;
+
+ if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
+ netif_stop_queue(dev);
+ net_tx_err(tp, KERN_ERR PFX
+ "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tp->Tx_skbuff[entry] = skb;
+
+ desc->PSize = cpu_to_le32(len);
+ desc->addr = cpu_to_le32(mapping);
+
+ desc->size = cpu_to_le32(len);
+ if (entry == (NUM_TX_DESC - 1))
+ desc->size |= cpu_to_le32(RingEnd);
+
+ wmb();
+
+ desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit);
+
+ tp->cur_tx++;
+
+ smp_wmb();
+
+ SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
+
+ dev->trans_start = jiffies;
+
+ dirty_tx = tp->dirty_tx;
+ if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
+ netif_stop_queue(dev);
+ smp_rmb();
+ if (dirty_tx != tp->dirty_tx)
+ netif_wake_queue(dev);
+ }
+out:
+ return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *sis190_get_stats(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return &tp->stats;
+}
+
+static void sis190_free_phy(struct list_head *first_phy)
+{
+ struct sis190_phy *cur, *next;
+
+ list_for_each_entry_safe(cur, next, first_phy, list) {
+ kfree(cur);
+ }
+}
+
+/**
+ * sis190_default_phy - Select default PHY for sis190 mac.
+ * @dev: the net device to probe for
+ *
+ * Select first detected PHY with link as default.
+ * If no one is link on, select PHY whose types is HOME as default.
+ * If HOME doesn't exist, select LAN.
+ */
+static u16 sis190_default_phy(struct net_device *dev)
+{
+ struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan;
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 status;
+
+ phy_home = phy_default = phy_lan = NULL;
+
+ list_for_each_entry(phy, &tp->first_phy, list) {
+ status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR);
+
+ // Link ON & Not select default PHY & not ghost PHY.
+ if ((status & BMSR_LSTATUS) &&
+ !phy_default &&
+ (phy->type != UNKNOWN)) {
+ phy_default = phy;
+ } else {
+ status = mdio_read(ioaddr, phy->phy_id, MII_BMCR);
+ mdio_write(ioaddr, phy->phy_id, MII_BMCR,
+ status | BMCR_ANENABLE | BMCR_ISOLATE);
+ if (phy->type == HOME)
+ phy_home = phy;
+ else if (phy->type == LAN)
+ phy_lan = phy;
+ }
+ }
+
+ if (!phy_default) {
+ if (phy_home)
+ phy_default = phy_home;
+ else if (phy_lan)
+ phy_default = phy_lan;
+ else
+ phy_default = list_entry(&tp->first_phy,
+ struct sis190_phy, list);
+ }
+
+ if (mii_if->phy_id != phy_default->phy_id) {
+ mii_if->phy_id = phy_default->phy_id;
+ net_probe(tp, KERN_INFO
+ "%s: Using transceiver at address %d as default.\n",
+ pci_name(tp->pci_dev), mii_if->phy_id);
+ }
+
+ status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
+ status &= (~BMCR_ISOLATE);
+
+ mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status);
+ status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR);
+
+ return status;
+}
+
+static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
+ struct sis190_phy *phy, unsigned int phy_id,
+ u16 mii_status)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct mii_chip_info *p;
+
+ INIT_LIST_HEAD(&phy->list);
+ phy->status = mii_status;
+ phy->phy_id = phy_id;
+
+ phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1);
+ phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2);
+
+ for (p = mii_chip_table; p->type; p++) {
+ if ((p->id[0] == phy->id[0]) &&
+ (p->id[1] == (phy->id[1] & 0xfff0))) {
+ break;
+ }
+ }
+
+ if (p->id[1]) {
+ phy->type = (p->type == MIX) ?
+ ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
+ LAN : HOME) : p->type;
+ } else
+ phy->type = UNKNOWN;
+
+ net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+ pci_name(tp->pci_dev),
+ (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
+}
+
+/**
+ * sis190_mii_probe - Probe MII PHY for sis190
+ * @dev: the net device to probe for
+ *
+ * Search for total of 32 possible mii phy addresses.
+ * Identify and set current phy if found one,
+ * return error if it failed to found.
+ */
+static int __devinit sis190_mii_probe(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct mii_if_info *mii_if = &tp->mii_if;
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id;
+ int rc = 0;
+
+ INIT_LIST_HEAD(&tp->first_phy);
+
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ struct sis190_phy *phy;
+ u16 status;
+
+ status = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+
+ // Try next mii if the current one is not accessible.
+ if (status == 0xffff || status == 0x0000)
+ continue;
+
+ phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ sis190_free_phy(&tp->first_phy);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ sis190_init_phy(dev, tp, phy, phy_id, status);
+
+ list_add(&tp->first_phy, &phy->list);
+ }
+
+ if (list_empty(&tp->first_phy)) {
+ net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
+ pci_name(tp->pci_dev));
+ rc = -EIO;
+ goto out;
+ }
+
+ /* Select default PHY for mac */
+ sis190_default_phy(dev);
+
+ mii_if->dev = dev;
+ mii_if->mdio_read = __mdio_read;
+ mii_if->mdio_write = __mdio_write;
+ mii_if->phy_id_mask = PHY_ID_ANY;
+ mii_if->reg_num_mask = MII_REG_ANY;
+out:
+ return rc;
+}
+
+static void __devexit sis190_mii_remove(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ sis190_free_phy(&tp->first_phy);
+}
+
+static void sis190_release_board(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct sis190_private *tp = netdev_priv(dev);
+
+ iounmap(tp->mmio_addr);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(dev);
+}
+
+static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
+{
+ struct sis190_private *tp;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ int rc;
+
+ dev = alloc_etherdev(sizeof(*tp));
+ if (!dev) {
+ net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+ rc = -ENOMEM;
+ goto err_out_0;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ tp = netdev_priv(dev);
+ tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT);
+
+ rc = pci_enable_device(pdev);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+ goto err_free_dev_1;
+ }
+
+ rc = -ENODEV;
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+ if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
+ net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
+ pci_name(pdev));
+ goto err_pci_disable_2;
+ }
+
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc < 0) {
+ net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
+ pci_name(pdev));
+ goto err_free_res_3;
+ }
+
+ pci_set_master(pdev);
+
+ ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
+ if (!ioaddr) {
+ net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
+ pci_name(pdev));
+ rc = -EIO;
+ goto err_free_res_3;
+ }
+
+ tp->pci_dev = pdev;
+ tp->mmio_addr = ioaddr;
+
+ sis190_irq_mask_and_ack(ioaddr);
+
+ sis190_soft_reset(ioaddr);
+out:
+ return dev;
+
+err_free_res_3:
+ pci_release_regions(pdev);
+err_pci_disable_2:
+ pci_disable_device(pdev);
+err_free_dev_1:
+ free_netdev(dev);
+err_out_0:
+ dev = ERR_PTR(rc);
+ goto out;
+}
+
+static void sis190_tx_timeout(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 tmp8;
+
+ /* Disable Tx, if not already */
+ tmp8 = SIS_R8(TxControl);
+ if (tmp8 & CmdTxEnb)
+ SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
+
+
+ net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
+ dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ SIS_W32(IntrMask, 0x0000);
+
+ /* Stop a shared interrupt from scavenging while we are. */
+ spin_lock_irq(&tp->lock);
+ sis190_tx_clear(tp);
+ spin_unlock_irq(&tp->lock);
+
+ /* ...and finally, reset everything. */
+ sis190_hw_start(dev);
+
+ netif_wake_queue(dev);
+}
+
+static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
+ struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 sig;
+ int i;
+
+ net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
+ pci_name(pdev));
+
+ /* Check to see if there is a sane EEPROM */
+ sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
+
+ if ((sig == 0xffff) || (sig == 0x0000)) {
+ net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
+ pci_name(pdev), sig);
+ return -EIO;
+ }
+
+ /* Get MAC address from EEPROM */
+ for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
+ __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+
+ ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+ }
+
+ return 0;
+}
+
+/**
+ * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model
+ * @pdev: PCI device
+ * @dev: network device to get address for
+ *
+ * SiS965 model, use APC CMOS RAM to store MAC address.
+ * APC CMOS RAM is accessed through ISA bridge.
+ * MAC address is read into @net_dev->dev_addr.
+ */
+static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
+ struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ struct pci_dev *isa_bridge;
+ u8 reg, tmp8;
+ int i;
+
+ net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
+ pci_name(pdev));
+
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL);
+ if (!isa_bridge) {
+ net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
+ pci_name(pdev));
+ return -EIO;
+ }
+
+ /* Enable port 78h & 79h to access APC Registers. */
+ pci_read_config_byte(isa_bridge, 0x48, &tmp8);
+ reg = (tmp8 & ~0x02);
+ pci_write_config_byte(isa_bridge, 0x48, reg);
+ udelay(50);
+ pci_read_config_byte(isa_bridge, 0x48, ®);
+
+ for (i = 0; i < MAC_ADDR_LEN; i++) {
+ outb(0x9 + i, 0x78);
+ dev->dev_addr[i] = inb(0x79);
+ }
+
+ outb(0x12, 0x78);
+ reg = inb(0x79);
+
+ /* Restore the value to ISA Bridge */
+ pci_write_config_byte(isa_bridge, 0x48, tmp8);
+ pci_dev_put(isa_bridge);
+
+ return 0;
+}
+
+/**
+ * sis190_init_rxfilter - Initialize the Rx filter
+ * @dev: network device to initialize
+ *
+ * Set receive filter address to our MAC address
+ * and enable packet filtering.
+ */
+static inline void sis190_init_rxfilter(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ u16 ctl;
+ int i;
+
+ ctl = SIS_R16(RxMacControl);
+ /*
+ * Disable packet filtering before setting filter.
+ * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits
+ * only and followed by RxMacAddr (6 bytes). Strange. -- FR
+ */
+ SIS_W16(RxMacControl, ctl & ~0x0f00);
+
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ SIS_W8(RxMacAddr + i, dev->dev_addr[i]);
+
+ SIS_W16(RxMacControl, ctl);
+ SIS_PCI_COMMIT();
+}
+
+static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev)
+{
+ u8 from;
+
+ pci_read_config_byte(pdev, 0x73, &from);
+
+ return (from & 0x00000001) ?
+ sis190_get_mac_addr_from_apc(pdev, dev) :
+ sis190_get_mac_addr_from_eeprom(pdev, dev);
+}
+
+static void sis190_set_speed_auto(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ int phy_id = tp->mii_if.phy_id;
+ int val;
+
+ net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+
+ val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+
+ // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0
+ // unchanged.
+ mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) |
+ ADVERTISE_100FULL | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_10HALF);
+
+ // Enable 1000 Full Mode.
+ mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL);
+
+ // Enable auto-negotiation and restart auto-negotiation.
+ mdio_write(ioaddr, phy_id, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET);
+}
+
+static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_gset(&tp->mii_if, cmd);
+}
+
+static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_ethtool_sset(&tp->mii_if, cmd);
+}
+
+static void sis190_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int sis190_get_regs_len(struct net_device *dev)
+{
+ return SIS190_REGS_SIZE;
+}
+
+static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (regs->len > SIS190_REGS_SIZE)
+ regs->len = SIS190_REGS_SIZE;
+
+ spin_lock_irqsave(&tp->lock, flags);
+ memcpy_fromio(p, tp->mmio_addr, regs->len);
+ spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int sis190_nway_reset(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return mii_nway_restart(&tp->mii_if);
+}
+
+static u32 sis190_get_msglevel(struct net_device *dev)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void sis190_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
+static struct ethtool_ops sis190_ethtool_ops = {
+ .get_settings = sis190_get_settings,
+ .set_settings = sis190_set_settings,
+ .get_drvinfo = sis190_get_drvinfo,
+ .get_regs_len = sis190_get_regs_len,
+ .get_regs = sis190_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = sis190_get_msglevel,
+ .set_msglevel = sis190_set_msglevel,
+ .nway_reset = sis190_nway_reset,
+};
+
+static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct sis190_private *tp = netdev_priv(dev);
+
+ return !netif_running(dev) ? -EINVAL :
+ generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
+}
+
+static int __devinit sis190_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version = 0;
+ struct sis190_private *tp;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ int rc;
+
+ if (!printed_version) {
+ net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+ printed_version = 1;
+ }
+
+ dev = sis190_init_board(pdev);
+ if (IS_ERR(dev)) {
+ rc = PTR_ERR(dev);
+ goto out;
+ }
+
+ tp = netdev_priv(dev);
+ ioaddr = tp->mmio_addr;
+
+ rc = sis190_get_mac_addr(pdev, dev);
+ if (rc < 0)
+ goto err_release_board;
+
+ sis190_init_rxfilter(dev);
+
+ INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+ dev->open = sis190_open;
+ dev->stop = sis190_close;
+ dev->do_ioctl = sis190_ioctl;
+ dev->get_stats = sis190_get_stats;
+ dev->tx_timeout = sis190_tx_timeout;
+ dev->watchdog_timeo = SIS190_TX_TIMEOUT;
+ dev->hard_start_xmit = sis190_start_xmit;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = sis190_netpoll;
+#endif
+ dev->set_multicast_list = sis190_set_rx_mode;
+ SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) 0xdead;
+
+ spin_lock_init(&tp->lock);
+
+ rc = sis190_mii_probe(dev);
+ if (rc < 0)
+ goto err_release_board;
+
+ rc = register_netdev(dev);
+ if (rc < 0)
+ goto err_remove_mii;
+
+ pci_set_drvdata(pdev, dev);
+
+ net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), "
+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+ pci_name(pdev), sis_chip_info[ent->driver_data].name,
+ ioaddr, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
+
+ netif_carrier_off(dev);
+
+ sis190_set_speed_auto(dev);
+out:
+ return rc;
+
+err_remove_mii:
+ sis190_mii_remove(dev);
+err_release_board:
+ sis190_release_board(pdev);
+ goto out;
+}
+
+static void __devexit sis190_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ sis190_mii_remove(dev);
+ unregister_netdev(dev);
+ sis190_release_board(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver sis190_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sis190_pci_tbl,
+ .probe = sis190_init_one,
+ .remove = __devexit_p(sis190_remove_one),
+};
+
+static int __init sis190_init_module(void)
+{
+ return pci_module_init(&sis190_pci_driver);
+}
+
+static void __exit sis190_cleanup_module(void)
+{
+ pci_unregister_driver(&sis190_pci_driver);
+}
+
+module_init(sis190_init_module);
+module_exit(sis190_cleanup_module);
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index e2cdaf8..8c9634a 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -135,6 +135,18 @@
<file:Documentation/networking/net-modules.txt>. The module will
be called dmfe.
+config ULI526X
+ tristate "ULi M526x controller support"
+ depends on NET_TULIP && PCI
+ select CRC32
+ ---help---
+ This driver is for ULi M5261/M5263 10/100M Ethernet Controller
+ (<http://www.uli.com.tw/>).
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will
+ be called uli526x.
+
config PCMCIA_XIRCOM
tristate "Xircom CardBus support (new driver)"
depends on NET_TULIP && CARDBUS
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 8bb9b46..451090d 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_TULIP) += tulip.o
obj-$(CONFIG_DE4X5) += de4x5.o
+obj-$(CONFIG_ULI526X) += uli526x.o
# Declare multi-part drivers.
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index e26c31f..f53396f 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -81,25 +81,6 @@
return retval & 0xffff;
}
- if(tp->chip_id == ULI526X && tp->revision >= 0x40) {
- int value;
- int i = 1000;
-
- value = ioread32(ioaddr + CSR9);
- iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-
- value = (phy_id << 21) | (location << 16) | 0x08000000;
- iowrite32(value, ioaddr + CSR10);
-
- while(--i > 0) {
- mdio_delay();
- if(ioread32(ioaddr + CSR10) & 0x10000000)
- break;
- }
- retval = ioread32(ioaddr + CSR10);
- spin_unlock_irqrestore(&tp->mii_lock, flags);
- return retval & 0xFFFF;
- }
/* Establish sync by sending at least 32 logic ones. */
for (i = 32; i >= 0; i--) {
iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
@@ -159,23 +140,6 @@
spin_unlock_irqrestore(&tp->mii_lock, flags);
return;
}
- if (tp->chip_id == ULI526X && tp->revision >= 0x40) {
- int value;
- int i = 1000;
-
- value = ioread32(ioaddr + CSR9);
- iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-
- value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF);
- iowrite32(value, ioaddr + CSR10);
-
- while(--i > 0) {
- if (ioread32(ioaddr + CSR10) & 0x10000000)
- break;
- }
- spin_unlock_irqrestore(&tp->mii_lock, flags);
- return;
- }
/* Establish sync by sending 32 logic ones. */
for (i = 32; i >= 0; i--) {
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 6915682..e058a9f 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -39,7 +39,6 @@
case MX98713:
case COMPEX9881:
case DM910X:
- case ULI526X:
default: {
struct medialeaf *mleaf;
unsigned char *p;
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 20346d8..05d2d96 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -88,7 +88,6 @@
I21145,
DM910X,
CONEXANT,
- ULI526X
};
@@ -482,11 +481,8 @@
static inline void tulip_restart_rxtx(struct tulip_private *tp)
{
- if(!(tp->chip_id == ULI526X &&
- (tp->revision == 0x40 || tp->revision == 0x50))) {
- tulip_stop_rxtx(tp);
- udelay(5);
- }
+ tulip_stop_rxtx(tp);
+ udelay(5);
tulip_start_rxtx(tp);
}
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index d45d8f5..05da5be 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -199,9 +199,6 @@
{ "Conexant LANfinity", 256, 0x0001ebef,
HAS_MII | HAS_ACPI, tulip_timer },
- /* ULi526X */
- { "ULi M5261/M5263", 128, 0x0001ebef,
- HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
};
@@ -239,8 +236,6 @@
{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
- { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
- { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */
{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
{ } /* terminate list */
@@ -522,7 +517,7 @@
dev->name);
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
|| tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
- || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+ || tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
@@ -1103,18 +1098,16 @@
entry = tp->cur_tx++ % TX_RING_SIZE;
if (entry != 0) {
- /* Avoid a chip errata by prefixing a dummy entry. Don't do
- this on the ULI526X as it triggers a different problem */
- if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
- tp->tx_buffers[entry].skb = NULL;
- tp->tx_buffers[entry].mapping = 0;
- tp->tx_ring[entry].length =
- (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
- tp->tx_ring[entry].buffer1 = 0;
- /* Must set DescOwned later to avoid race with chip */
- dummy = entry;
- entry = tp->cur_tx++ % TX_RING_SIZE;
- }
+ /* Avoid a chip errata by prefixing a dummy entry. */
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tp->tx_ring[entry].length =
+ (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+ tp->tx_ring[entry].buffer1 = 0;
+ /* Must set DescOwned later to avoid race with chip */
+ dummy = entry;
+ entry = tp->cur_tx++ % TX_RING_SIZE;
+
}
tp->tx_buffers[entry].skb = NULL;
@@ -1235,10 +1228,6 @@
{
if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
- return 1;
- if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
- return 1;
return 0;
}
@@ -1680,7 +1669,6 @@
switch (chip_idx) {
case DC21140:
case DM910X:
- case ULI526X:
default:
if (tp->mtable)
iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
new file mode 100644
index 0000000..5ae22b7
--- /dev/null
+++ b/drivers/net/tulip/uli526x.c
@@ -0,0 +1,1749 @@
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+
+*/
+
+#define DRV_NAME "uli526x"
+#define DRV_VERSION "0.9.3"
+#define DRV_RELDATE "2005-7-29"
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
+#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
+#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
+#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC 0x600
+#define RX_ALLOC_SIZE 0x620
+#define ULI526X_RESET 1
+#define CR0_DEFAULT 0
+#define CR6_DEFAULT 0x22200000
+#define CR7_DEFAULT 0x180c1
+#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE 100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF 0
+#define ULI526X_100MHF 1
+#define ULI526X_10MFD 4
+#define ULI526X_100MFD 5
+#define ULI526X_AUTO 8
+
+#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
+#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
+#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
+#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
+#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
+#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
+
+#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
+#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
+
+#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+
+#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ 0x4800
+#define CR9_SRCS 0x1
+#define CR9_SRCLK 0x2
+#define CR9_CRDOUT 0x8
+#define SROM_DATA_0 0x0
+#define SROM_DATA_1 0x4
+#define PHY_DATA_1 0x20000
+#define PHY_DATA_0 0x00000
+#define MDCLKH 0x10000
+
+#define PHY_POWER_DOWN 0x800
+
+#define SROM_V41_CODE 0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+ udelay(5); \
+ outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+ udelay(5);
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+ u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+ char *tx_buf_ptr; /* Data for us */
+ struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+ u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+ struct sk_buff *rx_skb_ptr; /* Data for us */
+ struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct uli526x_board_info {
+ u32 chip_id; /* Chip vendor/Device ID */
+ struct net_device *next_dev; /* next device */
+ struct pci_dev *pdev; /* PCI device */
+ spinlock_t lock;
+
+ long ioaddr; /* I/O base address */
+ u32 cr0_data;
+ u32 cr5_data;
+ u32 cr6_data;
+ u32 cr7_data;
+ u32 cr15_data;
+
+ /* pointer for memory physical address */
+ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
+ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
+ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
+ dma_addr_t first_tx_desc_dma;
+ dma_addr_t first_rx_desc_dma;
+
+ /* descriptor pointer */
+ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
+ unsigned char *buf_pool_start; /* Tx buffer pool align dword */
+ unsigned char *desc_pool_ptr; /* descriptor pool memory */
+ struct tx_desc *first_tx_desc;
+ struct tx_desc *tx_insert_ptr;
+ struct tx_desc *tx_remove_ptr;
+ struct rx_desc *first_rx_desc;
+ struct rx_desc *rx_insert_ptr;
+ struct rx_desc *rx_ready_ptr; /* packet come pointer */
+ unsigned long tx_packet_cnt; /* transmitted packet count */
+ unsigned long rx_avail_cnt; /* available rx descriptor count */
+ unsigned long interval_rx_cnt; /* rx packet count a callback time */
+
+ u16 dbug_cnt;
+ u16 NIC_capability; /* NIC media capability */
+ u16 PHY_reg4; /* Saved Phyxcer register 4 value */
+
+ u8 media_mode; /* user specify media mode */
+ u8 op_mode; /* real work media mode */
+ u8 phy_addr;
+ u8 link_failed; /* Ever link failed */
+ u8 wait_reset; /* Hardware failed, need to reset */
+ struct timer_list timer;
+
+ /* System defined statistic counter */
+ struct net_device_stats stats;
+
+ /* Driver defined statistic counter */
+ unsigned long tx_fifo_underrun;
+ unsigned long tx_loss_carrier;
+ unsigned long tx_no_carrier;
+ unsigned long tx_late_collision;
+ unsigned long tx_excessive_collision;
+ unsigned long tx_jabber_timeout;
+ unsigned long reset_count;
+ unsigned long reset_cr8;
+ unsigned long reset_fatal;
+ unsigned long reset_TXtimeout;
+
+ /* NIC SROM data */
+ unsigned char srom[128];
+ u8 init;
+};
+
+enum uli526x_offsets {
+ DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+ DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+ DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+ DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+ CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+ CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+ CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static char version[] __devinitdata =
+ KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
+ DRV_VERSION " (" DRV_RELDATE ")\n";
+
+static int uli526x_debug;
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+static u32 uli526x_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static unsigned char mode = 8;
+
+/* function declaration ------------------------------------- */
+static int uli526x_open(struct net_device *);
+static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static int uli526x_stop(struct net_device *);
+static struct net_device_stats * uli526x_get_stats(struct net_device *);
+static void uli526x_set_filter_mode(struct net_device *);
+static struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct net_device *, int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static u8 uli526x_sense_speed(struct uli526x_board_info *);
+static void uli526x_process_mode(struct uli526x_board_info *);
+static void uli526x_timer(unsigned long);
+static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
+static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
+static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
+static void uli526x_dynamic_reset(struct net_device *);
+static void uli526x_free_rxbuffer(struct uli526x_board_info *);
+static void uli526x_init(struct net_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+/* ULI526X network board routine ---------------------------- */
+
+/*
+ * Search ULI526X board, allocate space and register it
+ */
+
+static int __devinit uli526x_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct uli526x_board_info *db; /* board information structure */
+ struct net_device *dev;
+ int i, err;
+
+ ULI526X_DBUG(0, "uli526x_init_one()", 0);
+
+ if (!printed_version++)
+ printk(version);
+
+ /* Init network device */
+ dev = alloc_etherdev(sizeof(*db));
+ if (dev == NULL)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+ printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ err = -ENODEV;
+ goto err_out_free;
+ }
+
+ /* Enable Master/IO access, Disable memory access */
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_out_free;
+
+ if (!pci_resource_start(pdev, 0)) {
+ printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
+ printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ if (pci_request_regions(pdev, DRV_NAME)) {
+ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ err = -ENODEV;
+ goto err_out_disable;
+ }
+
+ /* Init system & device */
+ db = netdev_priv(dev);
+
+ /* Allocate Tx/Rx descriptor memory */
+ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+ if(db->desc_pool_ptr == NULL)
+ {
+ err = -ENOMEM;
+ goto err_out_nomem;
+ }
+ db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+ if(db->buf_pool_ptr == NULL)
+ {
+ err = -ENOMEM;
+ goto err_out_nomem;
+ }
+
+ db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+ db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+ db->buf_pool_start = db->buf_pool_ptr;
+ db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+ db->chip_id = ent->driver_data;
+ db->ioaddr = pci_resource_start(pdev, 0);
+
+ db->pdev = pdev;
+ db->init = 1;
+
+ dev->base_addr = db->ioaddr;
+ dev->irq = pdev->irq;
+ pci_set_drvdata(pdev, dev);
+
+ /* Register some necessary functions */
+ dev->open = &uli526x_open;
+ dev->hard_start_xmit = &uli526x_start_xmit;
+ dev->stop = &uli526x_stop;
+ dev->get_stats = &uli526x_get_stats;
+ dev->set_multicast_list = &uli526x_set_filter_mode;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ spin_lock_init(&db->lock);
+
+
+ /* read 64 word srom data */
+ for (i = 0; i < 64; i++)
+ ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+ /* Set Node address */
+ if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */
+ {
+ outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode
+ outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port
+ outl(0, db->ioaddr + DCR14); //Clear reset port
+ outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer
+ outl(0, db->ioaddr + DCR14); //Clear reset port
+ outl(0, db->ioaddr + DCR13); //Clear CR13
+ outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port
+ //Read MAC address from CR14
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inl(db->ioaddr + DCR14);
+ //Read end
+ outl(0, db->ioaddr + DCR13); //Clear CR13
+ outl(0, db->ioaddr + DCR0); //Clear CR0
+ udelay(10);
+ }
+ else /*Exist SROM*/
+ {
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = db->srom[20 + i];
+ }
+ err = register_netdev (dev);
+ if (err)
+ goto err_out_res;
+
+ printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
+
+ for (i = 0; i < 6; i++)
+ printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+ printk(", irq %d.\n", dev->irq);
+
+ pci_set_master(pdev);
+
+ return 0;
+
+err_out_res:
+ pci_release_regions(pdev);
+err_out_nomem:
+ if(db->desc_pool_ptr)
+ pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+ db->desc_pool_ptr, db->desc_pool_dma_ptr);
+
+ if(db->buf_pool_ptr != NULL)
+ pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_free:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+
+ return err;
+}
+
+
+static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_remove_one()", 0);
+
+ pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+ DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ db->desc_pool_dma_ptr);
+ pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+ db->buf_pool_ptr, db->buf_pool_dma_ptr);
+ unregister_netdev(dev);
+ pci_release_regions(pdev);
+ free_netdev(dev); /* free board information */
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
+}
+
+
+/*
+ * Open the interface.
+ * The interface is opened whenever "ifconfig" activates it.
+ */
+
+static int uli526x_open(struct net_device *dev)
+{
+ int ret;
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_open", 0);
+
+ ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
+ if (ret)
+ return ret;
+
+ /* system variable init */
+ db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
+ db->tx_packet_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ netif_carrier_off(dev);
+ db->wait_reset = 0;
+
+ db->NIC_capability = 0xf; /* All capability*/
+ db->PHY_reg4 = 0x1e0;
+
+ /* CR6 operation mode decision */
+ db->cr6_data |= ULI526X_TXTH_256;
+ db->cr0_data = CR0_DEFAULT;
+
+ /* Initialize ULI526X board */
+ uli526x_init(dev);
+
+ /* Active System Interface */
+ netif_wake_queue(dev);
+
+ /* set and active a timer process */
+ init_timer(&db->timer);
+ db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
+ db->timer.data = (unsigned long)dev;
+ db->timer.function = &uli526x_timer;
+ add_timer(&db->timer);
+
+ return 0;
+}
+
+
+/* Initialize ULI526X board
+ * Reset ULI526X board
+ * Initialize TX/Rx descriptor chain structure
+ * Send the set-up frame
+ * Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = db->ioaddr;
+ u8 phy_tmp;
+ u16 phy_value;
+ u16 phy_reg_reset;
+
+ ULI526X_DBUG(0, "uli526x_init()", 0);
+
+ /* Reset M526x MAC controller */
+ outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */
+ udelay(100);
+ outl(db->cr0_data, ioaddr + DCR0);
+ udelay(5);
+
+ /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+ db->phy_addr = 1;
+ for(phy_tmp=0;phy_tmp<32;phy_tmp++)
+ {
+ phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
+ if(phy_value != 0xffff&&phy_value!=0)
+ {
+ db->phy_addr = phy_tmp;
+ break;
+ }
+ }
+ if(phy_tmp == 32)
+ printk(KERN_WARNING "Can not find the phy address!!!");
+ /* Parser SROM and media mode */
+ db->media_mode = uli526x_media_mode;
+
+ /* Phyxcer capability setting */
+ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
+ phy_reg_reset = (phy_reg_reset | 0x8000);
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+ udelay(500);
+
+ /* Process Phyxcer Media Mode */
+ uli526x_set_phyxcer(db);
+
+ /* Media Mode Process */
+ if ( !(db->media_mode & ULI526X_AUTO) )
+ db->op_mode = db->media_mode; /* Force Mode */
+
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
+ uli526x_descriptor_init(db, ioaddr);
+
+ /* Init CR6 to program M526X operation */
+ update_cr6(db->cr6_data, ioaddr);
+
+ /* Send setup frame */
+ send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+
+ /* Init CR7, interrupt active bit */
+ db->cr7_data = CR7_DEFAULT;
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ /* Init CR15, Tx jabber and Rx watchdog timer */
+ outl(db->cr15_data, ioaddr + DCR15);
+
+ /* Enable ULI526X Tx/Rx function */
+ db->cr6_data |= CR6_RXSC | CR6_TXSC;
+ update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ * Hardware start transmission.
+ * Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ struct tx_desc *txptr;
+ unsigned long flags;
+
+ ULI526X_DBUG(0, "uli526x_start_xmit", 0);
+
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
+ /* Too large packet check */
+ if (skb->len > MAX_PACKET_SIZE) {
+ printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* No Tx resource check, it never happen nromally */
+ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+ return 1;
+ }
+
+ /* Disable NIC interrupt */
+ outl(0, dev->base_addr + DCR7);
+
+ /* transmit this packet */
+ txptr = db->tx_insert_ptr;
+ memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+ txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+ /* Point to next transmit free descriptor */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+
+ /* Transmit Packet Process */
+ if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
+ txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
+ db->tx_packet_cnt++; /* Ready to send */
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ dev->trans_start = jiffies; /* saved time stamp */
+ }
+
+ /* Tx resource check */
+ if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
+ netif_wake_queue(dev);
+
+ /* Restore CR7 to enable interrupt */
+ spin_unlock_irqrestore(&db->lock, flags);
+ outl(db->cr7_data, dev->base_addr + DCR7);
+
+ /* free this SKB */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+
+static int uli526x_stop(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ ULI526X_DBUG(0, "uli526x_stop", 0);
+
+ /* disable system */
+ netif_stop_queue(dev);
+
+ /* deleted timer */
+ del_timer_sync(&db->timer);
+
+ /* Reset & stop ULI526X board */
+ outl(ULI526X_RESET, ioaddr + DCR0);
+ udelay(5);
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+ /* free interrupt */
+ free_irq(dev->irq, dev);
+
+ /* free allocated rx buffer */
+ uli526x_free_rxbuffer(db);
+
+#if 0
+ /* show statistic counter */
+ printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+ db->tx_fifo_underrun, db->tx_excessive_collision,
+ db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+ db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+ db->reset_fatal, db->reset_TXtimeout);
+#endif
+
+ return 0;
+}
+
+
+/*
+ * M5261/M5263 insterrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ if (!dev) {
+ ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
+ return IRQ_NONE;
+ }
+
+ spin_lock_irqsave(&db->lock, flags);
+ outl(0, ioaddr + DCR7);
+
+ /* Got ULI526X status */
+ db->cr5_data = inl(ioaddr + DCR5);
+ outl(db->cr5_data, ioaddr + DCR5);
+ if ( !(db->cr5_data & 0x180c1) ) {
+ spin_unlock_irqrestore(&db->lock, flags);
+ outl(db->cr7_data, ioaddr + DCR7);
+ return IRQ_HANDLED;
+ }
+
+ /* Check system status */
+ if (db->cr5_data & 0x2000) {
+ /* system bus error happen */
+ ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+ db->reset_fatal++;
+ db->wait_reset = 1; /* Need to RESET */
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ /* Received the coming packet */
+ if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+ uli526x_rx_packet(dev, db);
+
+ /* reallocate rx descriptor buffer */
+ if (db->rx_avail_cnt<RX_DESC_CNT)
+ allocate_rx_buffer(db);
+
+ /* Free the transmitted descriptor */
+ if ( db->cr5_data & 0x01)
+ uli526x_free_tx_pkt(dev, db);
+
+ /* Restore CR7 to enable interrupt mask */
+ outl(db->cr7_data, ioaddr + DCR7);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ return IRQ_HANDLED;
+}
+
+
+/*
+ * Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
+{
+ struct tx_desc *txptr;
+ u32 tdes0;
+
+ txptr = db->tx_remove_ptr;
+ while(db->tx_packet_cnt) {
+ tdes0 = le32_to_cpu(txptr->tdes0);
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ if (tdes0 & 0x80000000)
+ break;
+
+ /* A packet sent completed */
+ db->tx_packet_cnt--;
+ db->stats.tx_packets++;
+
+ /* Transmit statistic counter */
+ if ( tdes0 != 0x7fffffff ) {
+ /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+ db->stats.collisions += (tdes0 >> 3) & 0xf;
+ db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ if (tdes0 & TDES0_ERR_MASK) {
+ db->stats.tx_errors++;
+ if (tdes0 & 0x0002) { /* UnderRun */
+ db->tx_fifo_underrun++;
+ if ( !(db->cr6_data & CR6_SFT) ) {
+ db->cr6_data = db->cr6_data | CR6_SFT;
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ }
+ if (tdes0 & 0x0100)
+ db->tx_excessive_collision++;
+ if (tdes0 & 0x0200)
+ db->tx_late_collision++;
+ if (tdes0 & 0x0400)
+ db->tx_no_carrier++;
+ if (tdes0 & 0x0800)
+ db->tx_loss_carrier++;
+ if (tdes0 & 0x4000)
+ db->tx_jabber_timeout++;
+ }
+ }
+
+ txptr = txptr->next_tx_desc;
+ }/* End of while */
+
+ /* Update TX remove pointer to next */
+ db->tx_remove_ptr = txptr;
+
+ /* Resource available check */
+ if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
+ netif_wake_queue(dev); /* Active upper layer, send again */
+}
+
+
+/*
+ * Receive the come packet and pass to upper layer
+ */
+
+static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+ int rxlen;
+ u32 rdes0;
+
+ rxptr = db->rx_ready_ptr;
+
+ while(db->rx_avail_cnt) {
+ rdes0 = le32_to_cpu(rxptr->rdes0);
+ if (rdes0 & 0x80000000) /* packet owner check */
+ {
+ break;
+ }
+
+ db->rx_avail_cnt--;
+ db->interval_rx_cnt++;
+
+ pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+ if ( (rdes0 & 0x300) != 0x300) {
+ /* A packet without First/Last flag */
+ /* reuse this SKB */
+ ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ /* A packet with First/Last flag */
+ rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+ /* error summary bit check */
+ if (rdes0 & 0x8000) {
+ /* This is a error packet */
+ //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+ db->stats.rx_errors++;
+ if (rdes0 & 1)
+ db->stats.rx_fifo_errors++;
+ if (rdes0 & 2)
+ db->stats.rx_crc_errors++;
+ if (rdes0 & 0x80)
+ db->stats.rx_length_errors++;
+ }
+
+ if ( !(rdes0 & 0x8000) ||
+ ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+ skb = rxptr->rx_skb_ptr;
+
+ /* Good packet, send to upper layer */
+ /* Shorst packet used new SKB */
+ if ( (rxlen < RX_COPY_SIZE) &&
+ ( (skb = dev_alloc_skb(rxlen + 2) )
+ != NULL) ) {
+ /* size less than COPY_SIZE, allocate a rxlen SKB */
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16byte align */
+ memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ } else {
+ skb->dev = dev;
+ skb_put(skb, rxlen);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ db->stats.rx_packets++;
+ db->stats.rx_bytes += rxlen;
+
+ } else {
+ /* Reuse SKB buffer when the packet is error */
+ ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+ uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+ }
+ }
+
+ rxptr = rxptr->next_rx_desc;
+ }
+
+ db->rx_ready_ptr = rxptr;
+}
+
+
+/*
+ * Get statistics from driver.
+ */
+
+static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_get_stats", 0);
+ return &db->stats;
+}
+
+
+/*
+ * Set ULI526X multicast address
+ */
+
+static void uli526x_set_filter_mode(struct net_device * dev)
+{
+ struct uli526x_board_info *db = dev->priv;
+ unsigned long flags;
+
+ ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+ if (dev->flags & IFF_PROMISC) {
+ ULI526X_DBUG(0, "Enable PROM Mode", 0);
+ db->cr6_data |= CR6_PM | CR6_PBF;
+ update_cr6(db->cr6_data, db->ioaddr);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
+ ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+ db->cr6_data &= ~(CR6_PM | CR6_PBF);
+ db->cr6_data |= CR6_PAM;
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
+ send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+static void
+ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
+{
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII);
+
+ ecmd->advertising = (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_Autoneg |
+ ADVERTISED_MII);
+
+
+ ecmd->port = PORT_MII;
+ ecmd->phy_address = db->phy_addr;
+
+ ecmd->transceiver = XCVR_EXTERNAL;
+
+ ecmd->speed = 10;
+ ecmd->duplex = DUPLEX_HALF;
+
+ if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+ {
+ ecmd->speed = 100;
+ }
+ if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+ {
+ ecmd->duplex = DUPLEX_FULL;
+ }
+ if(db->link_failed)
+ {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ if (db->media_mode & ULI526X_AUTO)
+ {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ }
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ if (np->pdev)
+ strcpy(info->bus_info, pci_name(np->pdev));
+ else
+ sprintf(info->bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ ULi_ethtool_gset(np, cmd);
+
+ return 0;
+}
+
+static u32 netdev_get_link(struct net_device *dev) {
+ struct uli526x_board_info *np = netdev_priv(dev);
+
+ if(np->link_failed)
+ return 0;
+ else
+ return 1;
+}
+
+static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = WAKE_PHY | WAKE_MAGIC;
+ wol->wolopts = 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .get_link = netdev_get_link,
+ .get_wol = uli526x_get_wol,
+};
+
+/*
+ * A periodic timer routine
+ * Dynamic media sense, allocate Rx buffer...
+ */
+
+static void uli526x_timer(unsigned long data)
+{
+ u32 tmp_cr8;
+ unsigned char tmp_cr12=0;
+ struct net_device *dev = (struct net_device *) data;
+ struct uli526x_board_info *db = netdev_priv(dev);
+ unsigned long flags;
+ u8 TmpSpeed=10;
+
+ //ULI526X_DBUG(0, "uli526x_timer()", 0);
+ spin_lock_irqsave(&db->lock, flags);
+
+
+ /* Dynamic reset ULI526X : system error or transmit time-out */
+ tmp_cr8 = inl(db->ioaddr + DCR8);
+ if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+ db->reset_cr8++;
+ db->wait_reset = 1;
+ }
+ db->interval_rx_cnt = 0;
+
+ /* TX polling kick monitor */
+ if ( db->tx_packet_cnt &&
+ time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
+ outl(0x1, dev->base_addr + DCR1); // Tx polling again
+
+ // TX Timeout
+ if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
+ db->reset_TXtimeout++;
+ db->wait_reset = 1;
+ printk( "%s: Tx timeout - resetting\n",
+ dev->name);
+ }
+ }
+
+ if (db->wait_reset) {
+ ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+ db->reset_count++;
+ uli526x_dynamic_reset(dev);
+ db->timer.expires = ULI526X_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+ return;
+ }
+
+ /* Link status check, Dynamic media type change */
+ if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
+ tmp_cr12 = 3;
+
+ if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+ /* Link Failed */
+ ULI526X_DBUG(0, "Link Failed", tmp_cr12);
+ netif_carrier_off(dev);
+ printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ db->link_failed = 1;
+
+ /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+ /* AUTO don't need */
+ if ( !(db->media_mode & 0x8) )
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+
+ /* AUTO mode, if INT phyxcer link failed, select EXT device */
+ if (db->media_mode & ULI526X_AUTO) {
+ db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
+ update_cr6(db->cr6_data, db->ioaddr);
+ }
+ } else
+ if ((tmp_cr12 & 0x3) && db->link_failed) {
+ ULI526X_DBUG(0, "Link link OK", tmp_cr12);
+ db->link_failed = 0;
+
+ /* Auto Sense Speed */
+ if ( (db->media_mode & ULI526X_AUTO) &&
+ uli526x_sense_speed(db) )
+ db->link_failed = 1;
+ uli526x_process_mode(db);
+
+ if(db->link_failed==0)
+ {
+ if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+ {
+ TmpSpeed = 100;
+ }
+ if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+ }
+ else
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+ }
+ netif_carrier_on(dev);
+ }
+ /* SHOW_MEDIA_TYPE(db->op_mode); */
+ }
+ else if(!(tmp_cr12 & 0x3) && db->link_failed)
+ {
+ if(db->init==1)
+ {
+ printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ netif_carrier_off(dev);
+ }
+ }
+ db->init=0;
+
+ /* Timer active again */
+ db->timer.expires = ULI526X_TIMER_WUT;
+ add_timer(&db->timer);
+ spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ * Dynamic reset the ULI526X board
+ * Stop ULI526X board
+ * Free Tx/Rx allocated memory
+ * Reset ULI526X board
+ * Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+
+ ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+ /* Sopt MAC controller */
+ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
+ update_cr6(db->cr6_data, dev->base_addr);
+ outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
+ outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+ /* Disable upper layer interface */
+ netif_stop_queue(dev);
+
+ /* Free Rx Allocate buffer */
+ uli526x_free_rxbuffer(db);
+
+ /* system variable init */
+ db->tx_packet_cnt = 0;
+ db->rx_avail_cnt = 0;
+ db->link_failed = 1;
+ db->init=1;
+ db->wait_reset = 0;
+
+ /* Re-initialize ULI526X board */
+ uli526x_init(dev);
+
+ /* Restart upper layer interface */
+ netif_wake_queue(dev);
+}
+
+
+/*
+ * free all allocated rx buffer
+ */
+
+static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
+{
+ ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
+
+ /* free allocated rx buffer */
+ while (db->rx_avail_cnt) {
+ dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+ db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+ db->rx_avail_cnt--;
+ }
+}
+
+
+/*
+ * Reuse the SK buffer
+ */
+
+static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
+{
+ struct rx_desc *rxptr = db->rx_insert_ptr;
+
+ if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+ rxptr->rx_skb_ptr = skb;
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ db->rx_avail_cnt++;
+ db->rx_insert_ptr = rxptr->next_rx_desc;
+ } else
+ ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ * Initialize transmit/Receive descriptor
+ * Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
+{
+ struct tx_desc *tmp_tx;
+ struct rx_desc *tmp_rx;
+ unsigned char *tmp_buf;
+ dma_addr_t tmp_tx_dma, tmp_rx_dma;
+ dma_addr_t tmp_buf_dma;
+ int i;
+
+ ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
+
+ /* tx descriptor start pointer */
+ db->tx_insert_ptr = db->first_tx_desc;
+ db->tx_remove_ptr = db->first_tx_desc;
+ outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
+
+ /* rx descriptor start pointer */
+ db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+ db->rx_insert_ptr = db->first_rx_desc;
+ db->rx_ready_ptr = db->first_rx_desc;
+ outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
+
+ /* Init Transmit chain */
+ tmp_buf = db->buf_pool_start;
+ tmp_buf_dma = db->buf_pool_dma_start;
+ tmp_tx_dma = db->first_tx_desc_dma;
+ for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+ tmp_tx->tx_buf_ptr = tmp_buf;
+ tmp_tx->tdes0 = cpu_to_le32(0);
+ tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
+ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+ tmp_tx_dma += sizeof(struct tx_desc);
+ tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+ tmp_tx->next_tx_desc = tmp_tx + 1;
+ tmp_buf = tmp_buf + TX_BUF_ALLOC;
+ tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+ }
+ (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+ tmp_tx->next_tx_desc = db->first_tx_desc;
+
+ /* Init Receive descriptor chain */
+ tmp_rx_dma=db->first_rx_desc_dma;
+ for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+ tmp_rx->rdes0 = cpu_to_le32(0);
+ tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+ tmp_rx_dma += sizeof(struct rx_desc);
+ tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+ tmp_rx->next_rx_desc = tmp_rx + 1;
+ }
+ (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+ tmp_rx->next_rx_desc = db->first_rx_desc;
+
+ /* pre-allocate Rx buffer */
+ allocate_rx_buffer(db);
+}
+
+
+/*
+ * Update CR6 value
+ * Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+ outl(cr6_data, ioaddr + DCR6);
+ udelay(5);
+}
+
+
+/*
+ * Send a setup frame for M5261/M5263
+ * This setup frame initialize ULI526X address filter mode
+ */
+
+static void send_filter_frame(struct net_device *dev, int mc_cnt)
+{
+ struct uli526x_board_info *db = netdev_priv(dev);
+ struct dev_mc_list *mcptr;
+ struct tx_desc *txptr;
+ u16 * addrptr;
+ u32 * suptr;
+ int i;
+
+ ULI526X_DBUG(0, "send_filter_frame()", 0);
+
+ txptr = db->tx_insert_ptr;
+ suptr = (u32 *) txptr->tx_buf_ptr;
+
+ /* Node address */
+ addrptr = (u16 *) dev->dev_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+
+ /* broadcast address */
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+
+ /* fit the multicast address */
+ for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+ addrptr = (u16 *) mcptr->dmi_addr;
+ *suptr++ = addrptr[0];
+ *suptr++ = addrptr[1];
+ *suptr++ = addrptr[2];
+ }
+
+ for (; i<14; i++) {
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ *suptr++ = 0xffff;
+ }
+
+ /* prepare the setup frame */
+ db->tx_insert_ptr = txptr->next_tx_desc;
+ txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+ /* Resource Check and Send the setup packet */
+ if (db->tx_packet_cnt < TX_DESC_CNT) {
+ /* Resource Empty */
+ db->tx_packet_cnt++;
+ txptr->tdes0 = cpu_to_le32(0x80000000);
+ update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+ outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
+ update_cr6(db->cr6_data, dev->base_addr);
+ dev->trans_start = jiffies;
+ } else
+ printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+}
+
+
+/*
+ * Allocate rx buffer,
+ * As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+ struct rx_desc *rxptr;
+ struct sk_buff *skb;
+
+ rxptr = db->rx_insert_ptr;
+
+ while(db->rx_avail_cnt < RX_DESC_CNT) {
+ if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+ break;
+ rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+ rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+ wmb();
+ rxptr->rdes0 = cpu_to_le32(0x80000000);
+ rxptr = rxptr->next_rx_desc;
+ db->rx_avail_cnt++;
+ }
+
+ db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ * Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+ int i;
+ u16 srom_data = 0;
+ long cr9_ioaddr = ioaddr + DCR9;
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ /* Send the Read Command 110b */
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+ SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+ /* Send the offset */
+ for (i = 5; i >= 0; i--) {
+ srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+ SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+ }
+
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+ for (i = 16; i > 0; i--) {
+ outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+ udelay(5);
+ srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+ outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+ udelay(5);
+ }
+
+ outl(CR9_SROM_READ, cr9_ioaddr);
+ return srom_data;
+}
+
+
+/*
+ * Auto sense the media mode
+ */
+
+static u8 uli526x_sense_speed(struct uli526x_board_info * db)
+{
+ u8 ErrFlag = 0;
+ u16 phy_mode;
+
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+ phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+ if ( (phy_mode & 0x24) == 0x24 ) {
+
+ phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
+ if(phy_mode&0x8000)
+ phy_mode = 0x8000;
+ else if(phy_mode&0x4000)
+ phy_mode = 0x4000;
+ else if(phy_mode&0x2000)
+ phy_mode = 0x2000;
+ else
+ phy_mode = 0x1000;
+
+ /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+ switch (phy_mode) {
+ case 0x1000: db->op_mode = ULI526X_10MHF; break;
+ case 0x2000: db->op_mode = ULI526X_10MFD; break;
+ case 0x4000: db->op_mode = ULI526X_100MHF; break;
+ case 0x8000: db->op_mode = ULI526X_100MFD; break;
+ default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
+ }
+ } else {
+ db->op_mode = ULI526X_10MHF;
+ ULI526X_DBUG(0, "Link Failed :", phy_mode);
+ ErrFlag = 1;
+ }
+
+ return ErrFlag;
+}
+
+
+/*
+ * Set 10/100 phyxcer capability
+ * AUTO mode : phyxcer register4 is NIC capability
+ * Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Phyxcer capability setting */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+ if (db->media_mode & ULI526X_AUTO) {
+ /* AUTO Mode */
+ phy_reg |= db->PHY_reg4;
+ } else {
+ /* Force Mode */
+ switch(db->media_mode) {
+ case ULI526X_10MHF: phy_reg |= 0x20; break;
+ case ULI526X_10MFD: phy_reg |= 0x40; break;
+ case ULI526X_100MHF: phy_reg |= 0x80; break;
+ case ULI526X_100MFD: phy_reg |= 0x100; break;
+ }
+
+ }
+
+ /* Write new capability to Phyxcer Reg4 */
+ if ( !(phy_reg & 0x01e0)) {
+ phy_reg|=db->PHY_reg4;
+ db->media_mode|=ULI526X_AUTO;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ /* Restart Auto-Negotiation */
+ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ udelay(50);
+}
+
+
+/*
+ * Process op-mode
+ AUTO mode : PHY controller in Auto-negotiation Mode
+ * Force mode: PHY controller in force mode with HUB
+ * N-way force capability with SWITCH
+ */
+
+static void uli526x_process_mode(struct uli526x_board_info *db)
+{
+ u16 phy_reg;
+
+ /* Full Duplex Mode Check */
+ if (db->op_mode & 0x4)
+ db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
+ else
+ db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
+
+ update_cr6(db->cr6_data, db->ioaddr);
+
+ /* 10/100M phyxcer force mode need */
+ if ( !(db->media_mode & 0x8)) {
+ /* Forece Mode */
+ phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+ if ( !(phy_reg & 0x1) ) {
+ /* parter without N-Way capability */
+ phy_reg = 0x0;
+ switch(db->op_mode) {
+ case ULI526X_10MHF: phy_reg = 0x0; break;
+ case ULI526X_10MFD: phy_reg = 0x100; break;
+ case ULI526X_100MHF: phy_reg = 0x2000; break;
+ case ULI526X_100MFD: phy_reg = 0x2100; break;
+ }
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+ }
+ }
+}
+
+
+/*
+ * Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+{
+ u16 i;
+ unsigned long ioaddr;
+
+ if(chip_id == PCI_ULI5263_ID)
+ {
+ phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+ return;
+ }
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send write command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* written trasnition */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Write a word data to PHY controller */
+ for ( i = 0x8000; i > 0; i >>= 1)
+ phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+}
+
+
+/*
+ * Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+ int i;
+ u16 phy_data;
+ unsigned long ioaddr;
+
+ if(chip_id == PCI_ULI5263_ID)
+ return phy_readby_cr10(iobase, phy_addr, offset);
+ /* M5261/M5263 Chip */
+ ioaddr = iobase + DCR9;
+
+ /* Send 33 synchronization clock to Phy controller */
+ for (i = 0; i < 35; i++)
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send start command(01) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+ /* Send read command(10) to Phy */
+ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+ /* Send Phy address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Send register address */
+ for (i = 0x10; i > 0; i = i >> 1)
+ phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+ /* Skip transition state */
+ phy_read_1bit(ioaddr, chip_id);
+
+ /* read 16bit data */
+ for (phy_data = 0, i = 0; i < 16; i++) {
+ phy_data <<= 1;
+ phy_data |= phy_read_1bit(ioaddr, chip_id);
+ }
+
+ return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+ unsigned long ioaddr,cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x08000000;
+ outl(cr10_value,ioaddr);
+ udelay(1);
+ while(1)
+ {
+ cr10_value = inl(ioaddr);
+ if(cr10_value&0x10000000)
+ break;
+ }
+ return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
+{
+ unsigned long ioaddr,cr10_value;
+
+ ioaddr = iobase + DCR10;
+ cr10_value = phy_addr;
+ cr10_value = (cr10_value<<5) + offset;
+ cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+ outl(cr10_value,ioaddr);
+ udelay(1);
+}
+/*
+ * Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+ outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
+ udelay(1);
+ outl(phy_data , ioaddr); /* MII Clock Low */
+ udelay(1);
+}
+
+
+/*
+ * Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+ u16 phy_data;
+
+ outl(0x50000 , ioaddr);
+ udelay(1);
+ phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+ outl(0x40000 , ioaddr);
+ udelay(1);
+
+ return phy_data;
+}
+
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+ { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
+ { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
+
+
+static struct pci_driver uli526x_driver = {
+ .name = "uli526x",
+ .id_table = uli526x_pci_tbl,
+ .probe = uli526x_init_one,
+ .remove = __devexit_p(uli526x_remove_one),
+};
+
+MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
+MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM(mode, "i");
+MODULE_PARM(cr6set, "i");
+MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+/* Description:
+ * when user used insmod to add module, system invoked init_module()
+ * to register the services.
+ */
+
+static int __init uli526x_init_module(void)
+{
+ int rc;
+
+ printk(version);
+ printed_version = 1;
+
+ ULI526X_DBUG(0, "init_module() ", debug);
+
+ if (debug)
+ uli526x_debug = debug; /* set debug flag */
+ if (cr6set)
+ uli526x_cr6_user_set = cr6set;
+
+ switch(mode) {
+ case ULI526X_10MHF:
+ case ULI526X_100MHF:
+ case ULI526X_10MFD:
+ case ULI526X_100MFD:
+ uli526x_media_mode = mode;
+ break;
+ default:uli526x_media_mode = ULI526X_AUTO;
+ break;
+ }
+
+ rc = pci_module_init(&uli526x_driver);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+
+/*
+ * Description:
+ * when user used rmmod to delete module, system invoked clean_module()
+ * to un-register all registered services.
+ */
+
+static void __exit uli526x_cleanup_module(void)
+{
+ ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
+ pci_unregister_driver(&uli526x_driver);
+}
+
+module_init(uli526x_init_module);
+module_exit(uli526x_cleanup_module);