ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL
We are doing a blind write to SATA_TOP_CTRL_BUS_CTRL to set the system
endian, but in doing so, we are also overwriting other bits, such as the
SATA_SCB_BURST_SIZE and SATA_FIFO_SIZE bits, which impact performance.
Do a read/modify/write so we keep the default values.
While we are at it, we also greatly simplify the logic and just leave
the NSP specific bit settings, instead of having a completely different
sequence.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 5936d16..ad3b882 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -70,6 +70,13 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+#define BUS_CTRL_ENDIAN_NSP_CONF \
+ (0x02 << DMADATA_ENDIAN_SHIFT | 0x02 << DMADESC_ENDIAN_SHIFT)
+
+#define BUS_CTRL_ENDIAN_CONF_MASK \
+ (0x3 << MMIO_ENDIAN_SHIFT | 0x3 << DMADESC_ENDIAN_SHIFT | \
+ 0x3 << DMADATA_ENDIAN_SHIFT | 0x3 << PIODATA_ENDIAN_SHIFT)
+
enum brcm_ahci_version {
BRCM_SATA_BCM7425 = 1,
BRCM_SATA_BCM7445,
@@ -250,18 +257,16 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
+ u32 data;
/* Configure endianness */
- if (priv->version == BRCM_SATA_NSP) {
- u32 data = brcm_sata_readreg(ctrl);
-
- data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
- (0x03 << DMADESC_ENDIAN_SHIFT));
- data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
- (0x02 << DMADESC_ENDIAN_SHIFT);
- brcm_sata_writereg(data, ctrl);
- } else
- brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
+ data = brcm_sata_readreg(ctrl);
+ data &= ~BUS_CTRL_ENDIAN_CONF_MASK;
+ if (priv->version == BRCM_SATA_NSP)
+ data |= BUS_CTRL_ENDIAN_NSP_CONF;
+ else
+ data |= BUS_CTRL_ENDIAN_CONF;
+ brcm_sata_writereg(data, ctrl);
}
#ifdef CONFIG_PM_SLEEP