drivers: net: cpsw: Fix TX_IN_SEL offset
The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was
incorrect. This caused the Dual MAC mode to never get set when
it should. It also caused possible unintentional setting of a
bit in the CPSW_PORT/TX_BLKS_REM register.
The purpose of setting the Dual MAC mode for this register is to:
"... allow packets from both ethernet ports to be written into
the FIFO without one port starving the other port."
- AM335x ARM TRM
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d879448..c560f9a 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -129,9 +129,9 @@
#define CPSW_VLAN_AWARE BIT(1)
#define CPSW_ALE_VLAN_AWARE 1
-#define CPSW_FIFO_NORMAL_MODE (0 << 15)
-#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15)
-#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15)
+#define CPSW_FIFO_NORMAL_MODE (0 << 16)
+#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16)
+#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16)
#define CPSW_INTPACEEN (0x3f << 16)
#define CPSW_INTPRESCALE_MASK (0x7FF << 0)