[PATCH] libata: rework legacy handling to remove much of the cruft
Kill host_set->next
Fix simplex support
Allow per platform setting of IDE legacy bases
Some of this can be tidied further later on, in particular all the
legacy port gunge belongs as a PCI quirk/PCI header decode to understand
the special legacy IDE rules in the PCI spec.
Longer term Jeff also wants to move the request_irq/free_irq out of core
which will make this even cleaner.
tj: folded in three followup patches - ata_piix-fix, broken-arch-fix
and fix-new-legacy-handling, and separated per-dev xfermask into
separate patch preceding this one. Folded in fixes are...
* ata_piix-fix: fix build failure due to host_set->next removal
* broken-arch-fix: add missing include/asm-*/libata-portmap.h
* fix-new-legacy-handling:
* In ata_pci_init_legacy_port(), probe_num was incorrectly
incremented during initialization of the secondary port and
probe_ent->n_ports was incorrectly fixed to 1.
* Both legacy ports ended up having the same hard_port_no.
* When printing port information, both legacy ports printed
the first irq.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 3268cf5..e694f60 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -854,7 +854,7 @@
if (bmdma) {
bmdma += 8;
if(inb(bmdma + 2) & 0x80)
- probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
probe_ent->port[p].bmdma_addr = bmdma;
}
ata_std_ports(&probe_ent->port[p]);
@@ -867,44 +867,55 @@
static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
- struct ata_port_info *port, int port_num)
+ struct ata_port_info **port, int port_mask)
{
struct ata_probe_ent *probe_ent;
- unsigned long bmdma;
+ unsigned long bmdma = pci_resource_start(pdev, 4);
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
+ int port_num = 0;
+
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
if (!probe_ent)
return NULL;
probe_ent->legacy_mode = 1;
- probe_ent->n_ports = 1;
- probe_ent->hard_port_no = port_num;
- probe_ent->private_data = port->private_data;
+ probe_ent->hard_port_no = 0;
+ probe_ent->private_data = port[0]->private_data;
- switch(port_num)
- {
- case 0:
- probe_ent->irq = 14;
- probe_ent->port[0].cmd_addr = 0x1f0;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x3f6;
- break;
- case 1:
+ if (port_mask & ATA_PORT_PRIMARY) {
+ probe_ent->irq = 14;
+ probe_ent->port[port_num].cmd_addr = ATA_PRIMARY_CMD;
+ probe_ent->port[port_num].altstatus_addr =
+ probe_ent->port[port_num].ctl_addr = ATA_PRIMARY_CTL;
+ if (bmdma) {
+ probe_ent->port[0].bmdma_addr = bmdma;
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ }
+ ata_std_ports(&probe_ent->port[port_num]);
+ port_num ++;
+ }
+ if (port_mask & ATA_PORT_SECONDARY) {
+ if (port_num == 1)
+ probe_ent->irq2 = 15;
+ else {
+ /* Secondary only. IRQ 15 only and "first" port is port 1 */
probe_ent->irq = 15;
- probe_ent->port[0].cmd_addr = 0x170;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x376;
- break;
+ probe_ent->hard_port_no = 1;
+ }
+ probe_ent->port[port_num].cmd_addr = ATA_SECONDARY_CMD;
+ probe_ent->port[port_num].altstatus_addr =
+ probe_ent->port[port_num].ctl_addr = ATA_SECONDARY_CTL;
+ if (bmdma) {
+ probe_ent->port[port_num].bmdma_addr = bmdma + 8;
+ if (inb(bmdma + 10) & 0x80)
+ probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
+ }
+ ata_std_ports(&probe_ent->port[port_num]);
+ port_num ++;
}
- bmdma = pci_resource_start(pdev, 4);
- if (bmdma != 0) {
- bmdma += 8 * port_num;
- probe_ent->port[0].bmdma_addr = bmdma;
- if (inb(bmdma + 2) & 0x80)
- probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;
- }
- ata_std_ports(&probe_ent->port[0]);
+ probe_ent->n_ports = port_num;
return probe_ent;
}
@@ -924,6 +935,10 @@
* regions, sets the dma mask, enables bus master mode, and calls
* ata_device_add()
*
+ * ASSUMPTION:
+ * Nobody makes a single channel controller that appears solely as
+ * the secondary legacy port on PCI.
+ *
* LOCKING:
* Inherited from PCI layer (may sleep).
*
@@ -934,7 +949,7 @@
int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports)
{
- struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
+ struct ata_probe_ent *probe_ent = NULL;
struct ata_port_info *port[2];
u8 tmp8, mask;
unsigned int legacy_mode = 0;
@@ -983,35 +998,34 @@
goto err_out;
}
- /* FIXME: Should use platform specific mappers for legacy port ranges */
if (legacy_mode) {
- if (!request_region(0x1f0, 8, "libata")) {
+ if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) {
struct resource *conflict, res;
- res.start = 0x1f0;
- res.end = 0x1f0 + 8 - 1;
+ res.start = ATA_PRIMARY_CMD;
+ res.end = ATA_PRIMARY_CMD + 8 - 1;
conflict = ____request_resource(&ioport_resource, &res);
if (!strcmp(conflict->name, "libata"))
- legacy_mode |= (1 << 0);
+ legacy_mode |= ATA_PORT_PRIMARY;
else {
disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
+ printk(KERN_WARNING "ata: 0x%0X IDE port busy\n", ATA_PRIMARY_CMD);
}
} else
- legacy_mode |= (1 << 0);
+ legacy_mode |= ATA_PORT_PRIMARY;
- if (!request_region(0x170, 8, "libata")) {
+ if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) {
struct resource *conflict, res;
- res.start = 0x170;
- res.end = 0x170 + 8 - 1;
+ res.start = ATA_SECONDARY_CMD;
+ res.end = ATA_SECONDARY_CMD + 8 - 1;
conflict = ____request_resource(&ioport_resource, &res);
if (!strcmp(conflict->name, "libata"))
- legacy_mode |= (1 << 1);
+ legacy_mode |= ATA_PORT_SECONDARY;
else {
disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
+ printk(KERN_WARNING "ata: 0x%X IDE port busy\n", ATA_SECONDARY_CMD);
}
} else
- legacy_mode |= (1 << 1);
+ legacy_mode |= ATA_PORT_SECONDARY;
}
/* we have legacy mode, but all ports are unavailable */
@@ -1029,17 +1043,14 @@
goto err_out_regions;
if (legacy_mode) {
- if (legacy_mode & (1 << 0))
- probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
- if (legacy_mode & (1 << 1))
- probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
+ probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode);
} else {
if (n_ports == 2)
probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
else
probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
}
- if (!probe_ent && !probe_ent2) {
+ if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
}
@@ -1047,35 +1058,17 @@
pci_set_master(pdev);
/* FIXME: check ata_device_add return */
- if (legacy_mode) {
- struct device *dev = &pdev->dev;
- struct ata_host_set *host_set = NULL;
-
- if (legacy_mode & (1 << 0)) {
- ata_device_add(probe_ent);
- host_set = dev_get_drvdata(dev);
- }
-
- if (legacy_mode & (1 << 1)) {
- ata_device_add(probe_ent2);
- if (host_set) {
- host_set->next = dev_get_drvdata(dev);
- dev_set_drvdata(dev, host_set);
- }
- }
- } else
- ata_device_add(probe_ent);
+ ata_device_add(probe_ent);
kfree(probe_ent);
- kfree(probe_ent2);
return 0;
err_out_regions:
- if (legacy_mode & (1 << 0))
- release_region(0x1f0, 8);
- if (legacy_mode & (1 << 1))
- release_region(0x170, 8);
+ if (legacy_mode & ATA_PORT_PRIMARY)
+ release_region(ATA_PRIMARY_CMD, 8);
+ if (legacy_mode & ATA_PORT_SECONDARY)
+ release_region(ATA_SECONDARY_CMD, 8);
pci_release_regions(pdev);
err_out:
if (disable_dev_on_err)