davinci: MMC platform support
Add SoC and platform-specific data and init for MMC driver.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 22f16f3..d4562f5 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -35,6 +35,7 @@
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
+#include <mach/mmc.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
@@ -190,6 +191,30 @@
dm355_init();
}
+static int dm355leopard_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+ .get_cd = dm355leopard_mmc_get_cd,
+ .get_ro = dm355leopard_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
/* Don't connect anything to J10 unless you're only using USB host
* mode *and* have to do so with some kind of gender-bender. If
* you have proper Mini-B or Mini-A cables (or Mini-A adapters)
@@ -248,6 +273,9 @@
/* irlml6401 switches over 1A in under 8 msec */
setup_usb(500, 8);
+ davinci_setup_mmc(0, &dm355leopard_mmc_config);
+ davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
ARRAY_SIZE(dm355_leopard_spi_info));
}