media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media
bus enum.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 664ffac..73a4bd7 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1820,7 +1820,7 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
goto power_off;
/* We're done here for DVP bus, while CSI-2 needs setup. */
- if (sensor->ep.bus_type != V4L2_MBUS_CSI2)
+ if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
return 0;
/*
@@ -1867,7 +1867,7 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
usleep_range(500, 1000);
} else {
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2) {
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
/* Reset MIPI bus settings to their default values. */
ov5640_write_reg(sensor,
OV5640_REG_IO_MIPI_CTRL00, 0x58);
@@ -2625,7 +2625,7 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
sensor->pending_fmt_change = false;
}
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
ret = ov5640_set_stream_mipi(sensor, enable);
else
ret = ov5640_set_stream_dvp(sensor, enable);