omap_hsmmc: ensure all clock enables and disables are paired
[madhu.cr@ti.com: fix for the db clock failure message]
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index a20fafe..14c58ca 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -162,7 +162,7 @@
int use_dma, dma_ch;
int dma_line_tx, dma_line_rx;
int slot_id;
- int dbclk_enabled;
+ int got_dbclk;
int response_busy;
int context_loss;
int dpm_state;
@@ -742,22 +742,24 @@
/* Disable the clocks */
clk_disable(host->fclk);
clk_disable(host->iclk);
- clk_disable(host->dbclk);
+ if (host->got_dbclk)
+ clk_disable(host->dbclk);
/* Turn the power off */
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
- if (ret != 0)
- goto err;
/* Turn the power ON with given VDD 1.8 or 3.0v */
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+ if (!ret)
+ ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
+ vdd);
+ clk_enable(host->iclk);
+ clk_enable(host->fclk);
+ if (host->got_dbclk)
+ clk_enable(host->dbclk);
+
if (ret != 0)
goto err;
- clk_enable(host->fclk);
- clk_enable(host->iclk);
- clk_enable(host->dbclk);
-
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
@@ -1695,18 +1697,22 @@
goto err1;
}
- host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
- /*
- * MMC can still work without debounce clock.
- */
- if (IS_ERR(host->dbclk))
- dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
- else
- if (clk_enable(host->dbclk) != 0)
- dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
- " clk failed\n");
+ if (cpu_is_omap2430()) {
+ host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+ /*
+ * MMC can still work without debounce clock.
+ */
+ if (IS_ERR(host->dbclk))
+ dev_warn(mmc_dev(host->mmc),
+ "Failed to get debounce clock\n");
else
- host->dbclk_enabled = 1;
+ host->got_dbclk = 1;
+
+ if (host->got_dbclk)
+ if (clk_enable(host->dbclk) != 0)
+ dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+ " clk failed\n");
+ }
/* Since we do only SG emulation, we can have as many segs
* as we want. */
@@ -1820,7 +1826,7 @@
clk_disable(host->iclk);
clk_put(host->fclk);
clk_put(host->iclk);
- if (host->dbclk_enabled) {
+ if (host->got_dbclk) {
clk_disable(host->dbclk);
clk_put(host->dbclk);
}
@@ -1854,7 +1860,7 @@
clk_disable(host->iclk);
clk_put(host->fclk);
clk_put(host->iclk);
- if (host->dbclk_enabled) {
+ if (host->got_dbclk) {
clk_disable(host->dbclk);
clk_put(host->dbclk);
}
@@ -1905,7 +1911,8 @@
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
mmc_host_disable(host->mmc);
clk_disable(host->iclk);
- clk_disable(host->dbclk);
+ if (host->got_dbclk)
+ clk_disable(host->dbclk);
} else {
host->suspended = 0;
if (host->pdata->resume) {
@@ -1936,15 +1943,14 @@
if (ret)
goto clk_en_err;
- if (clk_enable(host->dbclk) != 0)
- dev_dbg(mmc_dev(host->mmc),
- "Enabling debounce clk failed\n");
-
if (mmc_host_enable(host->mmc) != 0) {
clk_disable(host->iclk);
goto clk_en_err;
}
+ if (host->got_dbclk)
+ clk_enable(host->dbclk);
+
omap_hsmmc_conf_bus_power(host);
if (host->pdata->resume) {