diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f8cd56a..2c05b4f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -122,20 +122,21 @@
 #define BM_RCTL_PMCF          0x0040          /* Pass MAC Control Frames */
 #define BM_RCTL_RFCE          0x0080          /* Rx Flow Control Enable */
 
-#define HV_SCC_UPPER		PHY_REG(778, 16) /* Single Collision Count */
-#define HV_SCC_LOWER		PHY_REG(778, 17)
-#define HV_ECOL_UPPER		PHY_REG(778, 18) /* Excessive Collision Count */
-#define HV_ECOL_LOWER		PHY_REG(778, 19)
-#define HV_MCC_UPPER		PHY_REG(778, 20) /* Multiple Collision Count */
-#define HV_MCC_LOWER		PHY_REG(778, 21)
-#define HV_LATECOL_UPPER	PHY_REG(778, 23) /* Late Collision Count */
-#define HV_LATECOL_LOWER	PHY_REG(778, 24)
-#define HV_COLC_UPPER		PHY_REG(778, 25) /* Collision Count */
-#define HV_COLC_LOWER		PHY_REG(778, 26)
-#define HV_DC_UPPER		PHY_REG(778, 27) /* Defer Count */
-#define HV_DC_LOWER		PHY_REG(778, 28)
-#define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
-#define HV_TNCRS_LOWER		PHY_REG(778, 30)
+#define HV_STATS_PAGE	778
+#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
+#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
+#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
+#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
+#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
+#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
+#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)
 
 #define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
 
@@ -585,6 +586,7 @@
 extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
 extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
 extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
+extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
 extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
                                           u16 *data);
@@ -605,6 +607,10 @@
 extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
 extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
+						 u16 *phy_reg);
+extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
+						  u16 *phy_reg);
 extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
 extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
@@ -625,9 +631,13 @@
 extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
                                         u16 *data);
+extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
+				      u16 *data);
 extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
                                          u16 data);
+extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
+				       u16 data);
 extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
 extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
 extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index dde584f..2967039 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -246,6 +246,7 @@
 #define BM_WUC_ENABLE_REG		17
 #define BM_WUC_ENABLE_BIT		(1 << 2)
 #define BM_WUC_HOST_WU_BIT		(1 << 4)
+#define BM_WUC_ME_WU_BIT		(1 << 5)
 
 #define BM_WUC	PHY_REG(BM_WUC_PAGE, 1)
 #define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
@@ -778,7 +779,21 @@
 	s32  (*read_mac_addr)(struct e1000_hw *);
 };
 
-/* Function pointers for the PHY. */
+/*
+ * When to use various PHY register access functions:
+ *
+ *                 Func   Caller
+ *   Function      Does   Does    When to use
+ *   ~~~~~~~~~~~~  ~~~~~  ~~~~~~  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *   X_reg         L,P,A  n/a     for simple PHY reg accesses
+ *   X_reg_locked  P,A    L       for multiple accesses of different regs
+ *                                on different pages
+ *   X_reg_page    A      L,P     for multiple accesses of different regs
+ *                                on the same page
+ *
+ * Where X=[read|write], L=locking, P=sets page, A=register access
+ *
+ */
 struct e1000_phy_operations {
 	s32  (*acquire)(struct e1000_hw *);
 	s32  (*cfg_on_link_up)(struct e1000_hw *);
@@ -789,14 +804,17 @@
 	s32  (*get_cfg_done)(struct e1000_hw *hw);
 	s32  (*get_cable_length)(struct e1000_hw *);
 	s32  (*get_info)(struct e1000_hw *);
+	s32  (*set_page)(struct e1000_hw *, u16);
 	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
 	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_page)(struct e1000_hw *, u32, u16 *);
 	void (*release)(struct e1000_hw *);
 	s32  (*reset)(struct e1000_hw *);
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
 	s32  (*write_reg)(struct e1000_hw *, u32, u16);
 	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_page)(struct e1000_hw *, u32, u16);
 	void (*power_up)(struct e1000_hw *);
 	void (*power_down)(struct e1000_hw *);
 };
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index dddd0b3..1ede6e0 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -303,12 +303,15 @@
 	phy->addr                     = 1;
 	phy->reset_delay_us           = 100;
 
+	phy->ops.set_page             = e1000_set_page_igp;
 	phy->ops.read_reg             = e1000_read_phy_reg_hv;
 	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg_page        = e1000_read_phy_reg_page_hv;
 	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
 	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
 	phy->ops.write_reg            = e1000_write_phy_reg_hv;
 	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg_page       = e1000_write_phy_reg_page_hv;
 	phy->ops.power_up             = e1000_power_up_phy_copper;
 	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
@@ -1409,17 +1412,36 @@
 void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
 {
 	u32 mac_reg;
-	u16 i;
+	u16 i, phy_reg = 0;
+	s32 ret_val;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return;
+	ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+	if (ret_val)
+		goto release;
 
 	/* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
 	for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
 		mac_reg = er32(RAL(i));
-		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
+					   (u16)((mac_reg >> 16) & 0xFFFF));
+
 		mac_reg = er32(RAH(i));
-		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0x8000));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
+					   (u16)((mac_reg & E1000_RAH_AV)
+						 >> 16));
 	}
+
+	e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+release:
+	hw->phy.ops.release(hw);
 }
 
 /**
@@ -3897,6 +3919,7 @@
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
 	u16 phy_data;
+	s32 ret_val;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
@@ -3918,20 +3941,29 @@
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
-		e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
-		e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
-		e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
-		e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
-		e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
-		e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
-		e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
-		e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
-		e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
-		e1e_rphy(hw, HV_DC_UPPER, &phy_data);
-		e1e_rphy(hw, HV_DC_LOWER, &phy_data);
-		e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
-		e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return;
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
+		if (ret_val)
+			goto release;
+		hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+release:
+		hw->phy.ops.release(hw);
 	}
 }
 
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bc99458..51cf715 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3833,6 +3833,8 @@
 /**
  * e1000e_update_phy_stats - Update the PHY statistics counters
  * @adapter: board private structure
+ *
+ * Read/clear the upper 16-bit PHY registers and read/accumulate lower
  **/
 static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
 {
@@ -3844,89 +3846,61 @@
 	if (ret_val)
 		return;
 
-	hw->phy.addr = 1;
-
-#define HV_PHY_STATS_PAGE	778
 	/*
 	 * A page set is expensive so check if already on desired page.
 	 * If not, set to the page with the PHY status registers.
 	 */
+	hw->phy.addr = 1;
 	ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
 					   &phy_data);
 	if (ret_val)
 		goto release;
-	if (phy_data != (HV_PHY_STATS_PAGE << IGP_PAGE_SHIFT)) {
-		ret_val = e1000e_write_phy_reg_mdic(hw,
-						    IGP01E1000_PHY_PAGE_SELECT,
-						    (HV_PHY_STATS_PAGE <<
-						     IGP_PAGE_SHIFT));
+	if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
 		if (ret_val)
 			goto release;
 	}
 
-	/* Read/clear the upper 16-bit registers and read/accumulate lower */
-
 	/* Single Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_SCC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_SCC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.scc += phy_data;
 
 	/* Excessive Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_ECOL_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_ECOL_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.ecol += phy_data;
 
 	/* Multiple Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_MCC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_MCC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.mcc += phy_data;
 
 	/* Late Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_LATECOL_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_LATECOL_LOWER &
-					   MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.latecol += phy_data;
 
 	/* Collision Count - also used for adaptive IFS */
-	e1000e_read_phy_reg_mdic(hw, HV_COLC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_COLC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
 	if (!ret_val)
 		hw->mac.collision_delta = phy_data;
 
 	/* Defer Count */
-	e1000e_read_phy_reg_mdic(hw, HV_DC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_DC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.dc += phy_data;
 
 	/* Transmit with no CRS */
-	e1000e_read_phy_reg_mdic(hw, HV_TNCRS_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_TNCRS_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.tncrs += phy_data;
 
@@ -5154,21 +5128,34 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 i, mac_reg;
-	u16 phy_reg;
+	u16 phy_reg, wuc_enable;
 	int retval = 0;
 
 	/* copy MAC RARs to PHY RARs */
 	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
 
-	/* copy MAC MTA to PHY MTA */
+	retval = hw->phy.ops.acquire(hw);
+	if (retval) {
+		e_err("Could not acquire PHY\n");
+		return retval;
+	}
+
+	/* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
+	retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+	if (retval)
+		goto out;
+
+	/* copy MAC MTA to PHY MTA - only needed for pchlan */
 	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
 		mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
-		e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
+					   (u16)((mac_reg >> 16) & 0xFFFF));
 	}
 
 	/* configure PHY Rx Control register */
-	e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
+	hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
 	mac_reg = er32(RCTL);
 	if (mac_reg & E1000_RCTL_UPE)
 		phy_reg |= BM_RCTL_UPE;
@@ -5185,31 +5172,19 @@
 	mac_reg = er32(CTRL);
 	if (mac_reg & E1000_CTRL_RFCE)
 		phy_reg |= BM_RCTL_RFCE;
-	e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
 
 	/* enable PHY wakeup in MAC register */
 	ew32(WUFC, wufc);
 	ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
 
 	/* configure and enable PHY wakeup in PHY registers */
-	e1e_wphy(&adapter->hw, BM_WUFC, wufc);
-	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
 
 	/* activate PHY wakeup */
-	retval = hw->phy.ops.acquire(hw);
-	if (retval) {
-		e_err("Could not acquire PHY\n");
-		return retval;
-	}
-	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-	                         (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
-	retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (retval) {
-		e_err("Could not read PHY page 769\n");
-		goto out;
-	}
-	phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
-	retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+	retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
 	if (retval)
 		e_err("Could not set PHY Host Wakeup bit\n");
 out:
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 484774c..2a6ee13 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -36,7 +36,7 @@
 static s32 e1000_wait_autoneg(struct e1000_hw *hw);
 static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
 static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
-					  u16 *data, bool read);
+					  u16 *data, bool read, bool page_set);
 static u32 e1000_get_phy_addr_for_hv_page(u32 page);
 static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                                           u16 *data, bool read);
@@ -348,6 +348,24 @@
 }
 
 /**
+ *  e1000_set_page_igp - Set page as on IGP-like PHY(s)
+ *  @hw: pointer to the HW structure
+ *  @page: page to set (shifted left when necessary)
+ *
+ *  Sets PHY page required for PHY register access.  Assumes semaphore is
+ *  already acquired.  Note, this function sets phy.addr to 1 so the caller
+ *  must set it appropriately (if necessary) after this function returns.
+ **/
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
+{
+	e_dbg("Setting page 0x%x\n", page);
+
+	hw->phy.addr = 1;
+
+	return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
+}
+
+/**
  *  __e1000e_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
@@ -2418,7 +2436,7 @@
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
-							 false);
+							 false, false);
 		goto out;
 	}
 
@@ -2477,7 +2495,7 @@
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
-							 true);
+							 true, false);
 		goto out;
 	}
 
@@ -2535,7 +2553,7 @@
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
-							 true);
+							 true, false);
 		goto out;
 	}
 
@@ -2579,7 +2597,7 @@
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
-							 false);
+							 false, false);
 		goto out;
 	}
 
@@ -2603,104 +2621,163 @@
 }
 
 /**
- *  e1000_access_phy_wakeup_reg_bm - Read BM PHY wakeup register
+ *  e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
+ *
+ *  Assumes semaphore already acquired and phy_reg points to a valid memory
+ *  address to store contents of the BM_WUC_ENABLE_REG register.
+ **/
+s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val;
+	u16 temp;
+
+	/* All page select, port ctrl and wakeup registers use phy address 1 */
+	hw->phy.addr = 1;
+
+	/* Select Port Control Registers page */
+	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		e_dbg("Could not set Port Control page\n");
+		goto out;
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		e_dbg("Could not read PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		goto out;
+	}
+
+	/*
+	 * Enable both PHY wakeup mode and Wakeup register page writes.
+	 * Prevent a power state change by disabling ME and Host PHY wakeup.
+	 */
+	temp = *phy_reg;
+	temp |= BM_WUC_ENABLE_BIT;
+	temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
+	if (ret_val) {
+		e_dbg("Could not write PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+		goto out;
+	}
+
+	/* Select Host Wakeup Registers page */
+	ret_val = e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+
+	/* caller now able to write registers on the Wakeup registers page */
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
+ *  @hw: pointer to the HW structure
+ *  @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
+ *
+ *  Restore BM_WUC_ENABLE_REG to its original value.
+ *
+ *  Assumes semaphore already acquired and *phy_reg is the contents of the
+ *  BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
+ *  caller.
+ **/
+s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+	s32 ret_val = 0;
+
+	/* Select Port Control Registers page */
+	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		e_dbg("Could not set Port Control page\n");
+		goto out;
+	}
+
+	/* Restore 769.17 to its original value */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
+	if (ret_val)
+		e_dbg("Could not restore PHY register %d.%d\n",
+		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read or written
  *  @data: pointer to the data to read or write
  *  @read: determines if operation is read or write
+ *  @page_set: BM_WUC_PAGE already set and access enabled
  *
- *  Acquires semaphore, if necessary, then reads the PHY register at offset
- *  and storing the retrieved information in data.  Release any acquired
- *  semaphores before exiting. Note that procedure to read the wakeup
- *  registers are different. It works as such:
- *  1) Set page 769, register 17, bit 2 = 1
+ *  Read the PHY register at offset and store the retrieved information in
+ *  data, or write data to PHY register at offset.  Note the procedure to
+ *  access the PHY wakeup registers is different than reading the other PHY
+ *  registers. It works as such:
+ *  1) Set 769.17.2 (page 769, register 17, bit 2) = 1
  *  2) Set page to 800 for host (801 if we were manageability)
  *  3) Write the address using the address opcode (0x11)
  *  4) Read or write the data using the data opcode (0x12)
- *  5) Restore 769_17.2 to its original value
+ *  5) Restore 769.17.2 to its original value
  *
- *  Assumes semaphore already acquired.
+ *  Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
+ *  step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
+ *
+ *  Assumes semaphore is already acquired.  When page_set==true, assumes
+ *  the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
+ *  is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
  **/
 static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
-					  u16 *data, bool read)
+					  u16 *data, bool read, bool page_set)
 {
 	s32 ret_val;
 	u16 reg = BM_PHY_REG_NUM(offset);
+	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 phy_reg = 0;
 
-	/* Gig must be disabled for MDIO accesses to page 800 */
+	/* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
 	if ((hw->mac.type == e1000_pchlan) &&
-	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-		e_dbg("Attempting to access page 800 while gig enabled.\n");
+	    (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
+		e_dbg("Attempting to access page %d while gig enabled.\n",
+		      page);
 
-	/* All operations in this function are phy address 1 */
-	hw->phy.addr = 1;
-
-	/* Set page 769 */
-	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
-
-	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (ret_val) {
-		e_dbg("Could not read PHY page 769\n");
-		goto out;
+	if (!page_set) {
+		/* Enable access to PHY wakeup registers */
+		ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+		if (ret_val) {
+			e_dbg("Could not enable PHY wakeup reg access\n");
+			goto out;
+		}
 	}
 
-	/* First clear bit 4 to avoid a power state change */
-	phy_reg &= ~(BM_WUC_HOST_WU_BIT);
-	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
-	if (ret_val) {
-		e_dbg("Could not clear PHY page 769 bit 4\n");
-		goto out;
-	}
+	e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
 
-	/* Write bit 2 = 1, and clear bit 4 to 769_17 */
-	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
-	                                    phy_reg | BM_WUC_ENABLE_BIT);
-	if (ret_val) {
-		e_dbg("Could not write PHY page 769 bit 2\n");
-		goto out;
-	}
-
-	/* Select page 800 */
-	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-	                                    (BM_WUC_PAGE << IGP_PAGE_SHIFT));
-
-	/* Write the page 800 offset value using opcode 0x11 */
+	/* Write the Wakeup register page offset value using opcode 0x11 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
 	if (ret_val) {
-		e_dbg("Could not write address opcode to page 800\n");
+		e_dbg("Could not write address opcode to page %d\n", page);
 		goto out;
 	}
 
 	if (read) {
-	        /* Read the page 800 value using opcode 0x12 */
+		/* Read the Wakeup register page value using opcode 0x12 */
 		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 		                                   data);
 	} else {
-	        /* Write the page 800 value using opcode 0x12 */
+		/* Write the Wakeup register page value using opcode 0x12 */
 		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 						    *data);
 	}
 
 	if (ret_val) {
-		e_dbg("Could not access data value from page 800\n");
+		e_dbg("Could not access PHY reg %d.%d\n", page, reg);
 		goto out;
 	}
 
-	/*
-	 * Restore 769_17.2 to its original value
-	 * Set page 769
-	 */
-	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
-
-	/* Clear 769_17.2 */
-	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
-	if (ret_val) {
-		e_dbg("Could not clear PHY page 769 bit 2\n");
-		goto out;
-	}
+	if (!page_set)
+		ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
 
 out:
 	return ret_val;
@@ -2792,11 +2869,12 @@
  *  semaphore before exiting.
  **/
 static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
-                                   bool locked)
+				   bool locked, bool page_set)
 {
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2806,8 +2884,8 @@
 
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
-		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
-		                                         data, true);
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true, page_set);
 		goto out;
 	}
 
@@ -2817,26 +2895,25 @@
 		goto out;
 	}
 
-	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
 
-	if (page == HV_INTC_FC_PAGE_START)
-		page = 0;
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
 
-	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		u32 phy_addr = hw->phy.addr;
+			hw->phy.addr = phy_addr;
 
-		hw->phy.addr = 1;
-
-		/* Page is shifted left, PHY expects (page x 32) */
-		ret_val = e1000e_write_phy_reg_mdic(hw,
-					     IGP01E1000_PHY_PAGE_SELECT,
-					     (page << IGP_PAGE_SHIFT));
-		hw->phy.addr = phy_addr;
-
-		if (ret_val)
-			goto out;
+			if (ret_val)
+				goto out;
+		}
 	}
 
+	e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+	      page << IGP_PAGE_SHIFT, reg);
+
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
 	                                  data);
 out:
@@ -2858,7 +2935,7 @@
  **/
 s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
 {
-	return __e1000_read_phy_reg_hv(hw, offset, data, false);
+	return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
 }
 
 /**
@@ -2872,7 +2949,21 @@
  **/
 s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
 {
-	return __e1000_read_phy_reg_hv(hw, offset, data, true);
+	return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  e1000_read_phy_reg_page_hv - Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Reads the PHY register at offset and stores the retrieved information
+ *  in data.  Assumes semaphore already acquired and page already set.
+ **/
+s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
 }
 
 /**
@@ -2886,11 +2977,12 @@
  *  at the offset.  Release any acquired semaphores before exiting.
  **/
 static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
-                                    bool locked)
+				    bool locked, bool page_set)
 {
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
+	u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2900,8 +2992,8 @@
 
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
-		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
-		                                         &data, false);
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false, page_set);
 		goto out;
 	}
 
@@ -2911,41 +3003,40 @@
 		goto out;
 	}
 
-	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+	if (!page_set) {
+		if (page == HV_INTC_FC_PAGE_START)
+			page = 0;
 
-	if (page == HV_INTC_FC_PAGE_START)
-		page = 0;
+		/*
+		 * Workaround MDIO accesses being disabled after entering IEEE
+		 * Power Down (when bit 11 of the PHY Control register is set)
+		 */
+		if ((hw->phy.type == e1000_phy_82578) &&
+		    (hw->phy.revision >= 1) &&
+		    (hw->phy.addr == 2) &&
+		    ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
+			u16 data2 = 0x7EFF;
+			ret_val = e1000_access_phy_debug_regs_hv(hw,
+								 (1 << 6) | 0x3,
+								 &data2, false);
+			if (ret_val)
+				goto out;
+		}
 
-	/*
-	 * Workaround MDIO accesses being disabled after entering IEEE Power
-	 * Down (whenever bit 11 of the PHY Control register is set)
-	 */
-	if ((hw->phy.type == e1000_phy_82578) &&
-	    (hw->phy.revision >= 1) &&
-	    (hw->phy.addr == 2) &&
-	    ((MAX_PHY_REG_ADDRESS & reg) == 0) &&
-	    (data & (1 << 11))) {
-		u16 data2 = 0x7EFF;
-		ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
-		                                         &data2, false);
-		if (ret_val)
-			goto out;
+		if (reg > MAX_PHY_MULTI_PAGE_REG) {
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000_set_page_igp(hw,
+						     (page << IGP_PAGE_SHIFT));
+
+			hw->phy.addr = phy_addr;
+
+			if (ret_val)
+				goto out;
+		}
 	}
 
-	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		u32 phy_addr = hw->phy.addr;
-
-		hw->phy.addr = 1;
-
-		/* Page is shifted left, PHY expects (page x 32) */
-		ret_val = e1000e_write_phy_reg_mdic(hw,
-					     IGP01E1000_PHY_PAGE_SELECT,
-					     (page << IGP_PAGE_SHIFT));
-		hw->phy.addr = phy_addr;
-
-		if (ret_val)
-			goto out;
-	}
+	e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+	      page << IGP_PAGE_SHIFT, reg);
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
 	                                  data);
@@ -2968,7 +3059,7 @@
  **/
 s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
 {
-	return __e1000_write_phy_reg_hv(hw, offset, data, false);
+	return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
 }
 
 /**
@@ -2982,7 +3073,21 @@
  **/
 s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
 {
-	return __e1000_write_phy_reg_hv(hw, offset, data, true);
+	return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ *  e1000_write_phy_reg_page_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset.  Assumes semaphore
+ *  already acquired and page already set.
+ **/
+s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
 }
 
 /**
@@ -3004,11 +3109,12 @@
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read or written
  *  @data: pointer to the data to be read or written
- *  @read: determines if operation is read or written
+ *  @read: determines if operation is read or write
  *
  *  Reads the PHY register at offset and stores the retreived information
  *  in data.  Assumes semaphore already acquired.  Note that the procedure
- *  to read these regs uses the address port and data port to read/write.
+ *  to access these regs uses the address port and data port to read/write.
+ *  These accesses done with PHY address 2 and without using pages.
  **/
 static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                                           u16 *data, bool read)
@@ -3028,7 +3134,7 @@
 	/* masking with 0x3F to remove the page from offset */
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
-		e_dbg("Could not write PHY the HV address register\n");
+		e_dbg("Could not write the Address Offset port register\n");
 		goto out;
 	}
 
@@ -3039,7 +3145,7 @@
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
 	if (ret_val) {
-		e_dbg("Could not read data value from HV data register\n");
+		e_dbg("Could not access the Data port register\n");
 		goto out;
 	}