net: bcmgenet: Drop legacy MDIO code
Now that we have fully migrated to the mdio-bcm-unimac driver, drop the
legacy MDIO bus code which did duplicate a fair amount of code.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 368d5ea..7fdc352 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -28,59 +28,6 @@
#include "bcmgenet.h"
-/* read a value from the MII */
-static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location)
-{
- int ret;
- struct net_device *dev = bus->priv;
- struct bcmgenet_priv *priv = netdev_priv(dev);
- u32 reg;
-
- bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) |
- (location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD);
- /* Start MDIO transaction*/
- reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
- reg |= MDIO_START_BUSY;
- bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
- wait_event_timeout(priv->wq,
- !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD)
- & MDIO_START_BUSY),
- HZ / 100);
- ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
-
- /* Some broken devices are known not to release the line during
- * turn-around, e.g: Broadcom BCM53125 external switches, so check for
- * that condition here and ignore the MDIO controller read failure
- * indication.
- */
- if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (ret & MDIO_READ_FAIL))
- return -EIO;
-
- return ret & 0xffff;
-}
-
-/* write a value to the MII */
-static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id,
- int location, u16 val)
-{
- struct net_device *dev = bus->priv;
- struct bcmgenet_priv *priv = netdev_priv(dev);
- u32 reg;
-
- bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
- (location << MDIO_REG_SHIFT) | (0xffff & val)),
- UMAC_MDIO_CMD);
- reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
- reg |= MDIO_START_BUSY;
- bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
- wait_event_timeout(priv->wq,
- !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) &
- MDIO_START_BUSY),
- HZ / 100);
-
- return 0;
-}
-
/* setup netdev link state when PHY link status change and
* update UMAC and RGMII block when link up
*/
@@ -393,78 +340,6 @@ int bcmgenet_mii_probe(struct net_device *dev)
return 0;
}
-/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
- * their internal MDIO management controller making them fail to successfully
- * be read from or written to for the first transaction. We insert a dummy
- * BMSR read here to make sure that phy_get_device() and get_phy_id() can
- * correctly read the PHY MII_PHYSID1/2 registers and successfully register a
- * PHY device for this peripheral.
- *
- * Once the PHY driver is registered, we can workaround subsequent reads from
- * there (e.g: during system-wide power management).
- *
- * bus->reset is invoked before mdiobus_scan during mdiobus_register and is
- * therefore the right location to stick that workaround. Since we do not want
- * to read from non-existing PHYs, we either use bus->phy_mask or do a manual
- * Device Tree scan to limit the search area.
- */
-static int bcmgenet_mii_bus_reset(struct mii_bus *bus)
-{
- struct net_device *dev = bus->priv;
- struct bcmgenet_priv *priv = netdev_priv(dev);
- struct device_node *np = priv->mdio_dn;
- struct device_node *child = NULL;
- u32 read_mask = 0;
- int addr = 0;
-
- if (!np) {
- read_mask = 1 << priv->phy_addr;
- } else {
- for_each_available_child_of_node(np, child) {
- addr = of_mdio_parse_addr(&dev->dev, child);
- if (addr < 0)
- continue;
-
- read_mask |= 1 << addr;
- }
- }
-
- for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
- if (read_mask & 1 << addr) {
- dev_dbg(&dev->dev, "Workaround for PHY @ %d\n", addr);
- mdiobus_read(bus, addr, MII_BMSR);
- }
- }
-
- return 0;
-}
-
-static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv)
-{
- struct mii_bus *bus;
-
- if (priv->mii_bus)
- return 0;
-
- priv->mii_bus = mdiobus_alloc();
- if (!priv->mii_bus) {
- pr_err("failed to allocate\n");
- return -ENOMEM;
- }
-
- bus = priv->mii_bus;
- bus->priv = priv->dev;
- bus->name = "bcmgenet MII bus";
- bus->parent = &priv->pdev->dev;
- bus->read = bcmgenet_mii_read;
- bus->write = bcmgenet_mii_write;
- bus->reset = bcmgenet_mii_bus_reset;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d",
- priv->pdev->name, priv->pdev->id);
-
- return 0;
-}
-
static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv)
{
struct device_node *dn = priv->pdev->dev.of_node;