Merge tag 'v4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap device tree changes for v4.1, part1" from Tony Lindgren:
Device tree related changes for omaps:
- Add support for ChiliSOM
- Add support for OpenPandora
- Add support for BeagleBoard NAND
- Enable crypto devices for omap3 devices
- Add bindings for omap3 camera support
- Updates for am437x and dra7x and dm816x SoCs
* tag 'v4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
ARM: dts: Update Nanobone dts file
ARM: dts: n950, n9: Add primary camera support
ARM: dts: omap3: Add DT entries for OMAP 3 ISP
Documentation: DT: Add bindings for omap3isp
ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsi
ARM: dts: omap3-tao3530: Include directly omap34xx.dtsi
ARM: dts: n900: Enable omap sham and include directly omap34xx.dtsi
ARM: dts: n9/n950: Enable omap crypto support
ARM: dts: Remove PIN_INPUT for dm816x McSPI
ARM: dts: Add cppi41 support for dm816x MUSB
ARM: dts: Fix typo for dm816x usb0_pins
ARM: dts: dra7x-evm: beagle-x15: Fix USB Peripheral
ARM: dts: am57xx-beagle-x15: Do not include the atl header
ARM: dts: DRA7: Remove ti,timer-dsp and ti,timer-pwm properties
Documentation: omap-twl4030: Move ti,codec property to optional
ARM: dts: omap3: Remove all references to ti,codec property
ARM: dts: omap3-beagle: Add NAND device
ARM: dts: AM4372: update hdq compatible property
ARM: dts: omap3-pandora: add DM3730 1 GHz version
ARM: dts: omap3-pandora: add OMAP3530 600 MHz version
...
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
new file mode 100644
index 0000000..ac23de8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
@@ -0,0 +1,71 @@
+OMAP 3 ISP Device Tree bindings
+===============================
+
+The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
+
+Required properties
+===================
+
+compatible : must contain "ti,omap3-isp"
+
+reg : the two registers sets (physical address and length) for the
+ ISP. The first set contains the core ISP registers up to
+ the end of the SBL block. The second set contains the
+ CSI PHYs and receivers registers.
+interrupts : the ISP interrupt specifier
+iommus : phandle and IOMMU specifier for the IOMMU that serves the ISP
+syscon : the phandle and register offset to the Complex I/O or CSI-PHY
+ register
+ti,phy-type : 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
+ 1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
+#clock-cells : Must be 1 --- the ISP provides two external clocks,
+ cam_xclka and cam_xclkb, at indices 0 and 1,
+ respectively. Please find more information on common
+ clock bindings in ../clock/clock-bindings.txt.
+
+Port nodes (optional)
+---------------------
+
+More documentation on these bindings is available in
+video-interfaces.txt in the same directory.
+
+reg : The interface:
+ 0 - parallel (CCDC)
+ 1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
+ CSI1 -- CSIb on 3430
+ 2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
+ CSI2 -- CSIa on 3430
+
+Optional properties
+===================
+
+vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
+vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
+
+Endpoint nodes
+--------------
+
+lane-polarities : lane polarity (required on CSI-2)
+ 0 -- not inverted; 1 -- inverted
+data-lanes : an array of data lanes from 1 to 3. The length can
+ be either 1 or 2. (required on CSI-2)
+clock-lanes : the clock lane (from 1 to 3). (required on CSI-2)
+
+
+Example
+=======
+
+ isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&scm_conf 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 342eedd..54c2a15 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -4,7 +4,27 @@
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- reg : address and length of the register space
+- interrupts or interrupts-extended : Should contain the uart interrupt
+ specifier or both the interrupt
+ controller phandle and interrupt
+ specifier.
- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
Optional properties:
- clock-frequency : frequency of the clock input to the UART
+- dmas : DMA specifier, consisting of a phandle to the DMA controller
+ node and a DMA channel number.
+- dma-names : "rx" for receive channel, "tx" for transmit channel.
+
+Example:
+
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
index 1ab6bc8..f6a715e 100644
--- a/Documentation/devicetree/bindings/sound/omap-twl4030.txt
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -4,9 +4,9 @@
- compatible: "ti,omap-twl4030"
- ti,model: Name of the sound card (for example "omap3beagle")
- ti,mcbsp: phandle for the McBSP node
-- ti,codec: phandle for the twl4030 audio node
Optional properties:
+- ti,codec: phandle for the twl4030 audio node
- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl
- ti, jack-det-gpio: Jack detect GPIO
- ti,audio-routing: List of connections between audio components.
@@ -59,5 +59,4 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389ca13..f6a9f25 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -77,6 +77,7 @@
globalscale Globalscale Technologies, Inc.
gmt Global Mixed-mode Technology, Inc.
google Google, Inc.
+grinn Grinn
gumstix Gumstix, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
diff --git a/MAINTAINERS b/MAINTAINERS
index eaf9996..6a271a6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7077,6 +7077,7 @@
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1f1aa7..7f85ca0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -393,6 +393,8 @@
omap3-overo-storm-tobi.dtb \
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
+ omap3-pandora-600mhz.dtb \
+ omap3-pandora-1ghz.dtb \
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
@@ -408,7 +410,8 @@
am335x-evmsk.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb
+ am335x-lxm.dtb \
+ am335x-chiliboard.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
new file mode 100644
index 0000000..310da20
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+ model = "AM335x Chiliboard";
+ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+ "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_gpio_pins>;
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ usb1_drvvbus: usb1_drvvbus {
+ pinctrl-single,pins = <
+ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ >;
+ };
+
+ sd_pins: pinmux_sd_card {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ led_gpio_pins: led_gpio_pins {
+ pinctrl-single,pins = <
+ 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ >;
+ };
+};
+
+&ldo4_reg {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+};
+
+&phy_sel {
+ rmii-clock-ext;
+};
+
+/* USB */
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_drvvbus>;
+
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* microSD */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ vmmc-supply = <&ldo4_reg>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
new file mode 100644
index 0000000..7e9a34d
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "am33xx.dtsi"
+
+/ {
+ model = "Grinn AM335x ChiliSOM";
+ compatible = "grinn,am335x-chilisom", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: nandflash_pins {
+ pinctrl-single,pins = <
+ 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3d";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+/* Ethernet MAC */
+&mac {
+ slaves = <1>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+/* NAND Flash */
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index a346645..5ed4ca6 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -213,7 +213,9 @@
pinctrl-0 = <&i2c0_pins>;
gpio@20 {
- compatible = "mcp,mcp23017";
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
reg = <0x20>;
};
@@ -222,7 +224,7 @@
};
eeprom@53 {
- compatible = "mcp,24c02";
+ compatible = "microchip,24c02";
reg = <0x53>;
pagesize = <8>;
};
@@ -297,8 +299,8 @@
| |-->0x004FFFFF-> Kernel end
| |-->0x00500000-> File system start
| |
- | |-->0x014FFFFF-> File system end
- | |-->0x01500000-> User data start
+ | |-->0x01FFFFFF-> File system end
+ | |-->0x02000000-> User data start
| |
| |-->0x03FFFFFF-> User data end
| |-->0x04000000-> Data storage start
@@ -327,12 +329,12 @@
partition@4 {
label = "rootfs";
- reg = <0x00500000 0x01000000>; /* 16MB */
+ reg = <0x00500000 0x01b00000>; /* 27MB */
};
partition@5 {
label = "user";
- reg = <0x01500000 0x02b00000>; /* 43MB */
+ reg = <0x02000000 0x02000000>; /* 32MB */
};
partition@6 {
@@ -343,7 +345,7 @@
};
&mac {
- dual_emac = <1>;
+ dual_emac;
status = "okay";
};
@@ -353,11 +355,13 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1943fc3..ae0e8c1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -884,7 +884,7 @@
};
hdq: hdq@48347000 {
- compatible = "ti,am43xx-hdq";
+ compatible = "ti,am4372-hdq";
reg = <0x48347000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&func_12m_clk>;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 0198f5a..37834427 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -133,6 +133,20 @@
>;
};
+ i2c2_pins_default: i2c2_pins_default {
+ pinctrl-single,pins = <
+ 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+ 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+ >;
+ };
+
+ i2c2_pins_sleep: i2c2_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
@@ -263,6 +277,14 @@
};
};
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_pins_default>;
+ pinctrl-1 = <&i2c2_pins_sleep>;
+ clock-frequency = <100000>;
+};
+
&epwmss0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 6463f9e..41642fe 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -8,7 +8,6 @@
/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/clk/ti-dra7-atl.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -549,6 +548,14 @@
pinctrl-0 = <&usb1_pins>;
};
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
&usb2 {
dr_mode = "peripheral";
};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index d3a29c1..dee39c3 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -29,22 +29,22 @@
&dm816x_pinmux {
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */
- DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */
- DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */
- DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
+ DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
+ DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
+ DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
+ DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
>;
};
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
- DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
+ DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
>;
};
- usb1_pins: pinmux_usb0_pins {
+ usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */
+ DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
>;
};
};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c97b5f..90c8207 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -386,6 +386,29 @@
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
};
usb1: usb@47401800 {
@@ -403,6 +426,43 @@
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
mentor,power = <500>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ #dma-channels = <30>;
+ #dma-requests = <256>;
};
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 3290a96..746cddb 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -543,6 +543,14 @@
};
};
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 127608d..eea4a54 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -658,7 +658,6 @@
reg = <0x48820000 0x80>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
- ti,timer-dsp;
};
timer6: timer@48822000 {
@@ -666,8 +665,6 @@
reg = <0x48822000 0x80>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer7: timer@48824000 {
@@ -675,7 +672,6 @@
reg = <0x48824000 0x80>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
- ti,timer-dsp;
};
timer8: timer@48826000 {
@@ -683,8 +679,6 @@
reg = <0x48826000 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
- ti,timer-dsp;
- ti,timer-pwm;
};
timer9: timer@4803e000 {
@@ -706,7 +700,6 @@
reg = <0x48088000 0x80>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
- ti,timer-pwm;
};
timer13: timer@48828000 {
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index e0264d0..4d87117 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -380,6 +380,14 @@
phy-supply = <&ldo4_reg>;
};
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 4bdcbd6..2a9994f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1421,6 +1421,14 @@
ti,dividers = <1>, <8>;
};
+ clkout2_clk: clkout2_clk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&clkoutmux2_clk_mux>;
+ ti,bit-shift = <8>;
+ reg = <0x06b0>;
+ };
+
l3init_960m_gfclk: l3init_960m_gfclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 25f7b0a..da1464b 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -60,7 +60,6 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
gpio_keys {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index c792391..28f99a1 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -71,7 +71,6 @@
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
gpio_keys {
@@ -379,3 +378,55 @@
};
};
};
+
+&gpmc {
+ status = "ok";
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
+
+ /* Chip select 0 */
+ nand@0,0 {
+ reg = <0 0 4>; /* NAND I/O window, 4 bytes */
+ interrupts = <20>;
+ ti,nand-ecc-opt = "ham1";
+ nand-bus-width = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpmc,device-width = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+ partition@1c0000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index d9e92b6..046cd77 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -16,7 +16,6 @@
ti,model = "cm-t35";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 169037e..134d3f2 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -48,7 +48,6 @@
ti,model = "devkit8000";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
ti,audio-routing =
"Ext Spk", "PREDRIVEL",
"Ext Spk", "PREDRIVER",
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fb3a696..b9f6881 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -46,7 +46,6 @@
ti,model = "gta04";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
spi_lcd {
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 8a63ad2..d5e5cd4 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -22,7 +22,6 @@
compatible = "ti,omap-twl4030";
ti,model = "igep2";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
vdd33: regulator-vdd33 {
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index e81fb65..e631333 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -38,7 +38,6 @@
ti,model = "lilly-a83x";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
reg_vcc3: vcc3 {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index 9938b5d..f2e2139 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -16,3 +16,40 @@
model = "Nokia N9";
compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <(16 * 64)>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <1 3>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index db80f9d..bbea307 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,9 +9,23 @@
/dts-v1/;
-#include "omap34xx-hs.dtsi"
+#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
+/*
+ * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
+ * for omap AES HW crypto support. When linux kernel try to access memory of AES
+ * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
+ * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
+ * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
+ * There is "unofficial" version of bootloader which enables AES in L3 firewall
+ * but it is not widely used and to prevent kernel crash rather AES is disabled.
+ * There is also no runtime detection code if AES is disabled in L3 firewall...
+ */
+&aes {
+ status = "disabled";
+};
+
/ {
model = "Nokia N900";
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index c41db94..800b379 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-#include "omap36xx-hs.dtsi"
+#include "omap36xx.dtsi"
/ {
cpus {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 261c558..0885b34 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -16,3 +16,40 @@
model = "Nokia N950";
compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
};
+
+&i2c2 {
+ smia_1: camera@10 {
+ compatible = "nokia,smia";
+ reg = <0x10>;
+ /* No reset gpio */
+ vana-supply = <&vaux3>;
+ clocks = <&isp 0>;
+ clock-frequency = <9600000>;
+ nokia,nvm-size = <(16 * 64)>;
+ port {
+ smia_1_1: endpoint {
+ link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi2a_ep>;
+ };
+ };
+ };
+};
+
+&isp {
+ vdd-csiphy1-supply = <&vaux2>;
+ vdd-csiphy2-supply = <&vaux2>;
+ ports {
+ port@2 {
+ reg = <2>;
+ csi2a_ep: endpoint {
+ remote-endpoint = <&smia_1_1>;
+ clock-lanes = <2>;
+ data-lanes = <3 1>;
+ crc = <1>;
+ lane-polarities = <1 1 1>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index d36bf02..18e1649 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -27,7 +27,6 @@
ti,model = "overo";
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
/* HS USB Port 2 Power */
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
new file mode 100644
index 0000000..9619a28
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * device tree for OpenPandora 1GHz with DM3730
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console 1GHz";
+
+ compatible = "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: pinmux_control_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4) /* reserved.gpio_127 = MMC2_WP */
+ OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 = MMC1_WP */
+ OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_128 = LED_MMC1 */
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4) /* reserved.gpio_129 = LED_MMC2 */
+
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
new file mode 100644
index 0000000..fb803a7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * device tree for OpenPandora with OMAP3530
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+ model = "Pandora Handheld Console";
+
+ compatible = "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ &control_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
+ OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
+ OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
+ >;
+ };
+
+ control_pins: pinmux_control_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* etk_d0.gpio_14 = HP_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4) /* etk_d1.gpio_15 = BT_SHUTDOWN */
+ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 = RESET_USB_HOST */
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4) /* etk_d7.gpio_21 = WIFI IRQ */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 = MSECURE */
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4) /* etk_d9.gpio_23 = WIFI_POWER */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
new file mode 100644
index 0000000..782ab1f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -0,0 +1,640 @@
+/*
+ * Copyright (C) 2015
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ * Common device tree include for OpenPandora devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ aliases {
+ display0 = &lcd;
+ };
+
+ tv: connector@1 {
+ compatible = "connector-analog-tv";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ gpio-leds {
+
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led@1 {
+ label = "pandora::sd1";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "pandora::sd2";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "pandora::bluetooth";
+ gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "pandora::wifi";
+ gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
+ linux,default-trigger = "mmc2";
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+
+ up-button {
+ label = "up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
+ gpio-key,wakeup;
+ };
+
+ down-button {
+ label = "down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
+ gpio-key,wakeup;
+ };
+
+ left-button {
+ label = "left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
+ gpio-key,wakeup;
+ };
+
+ right-button {
+ label = "right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
+ gpio-key,wakeup;
+ };
+
+ pageup-button {
+ label = "game 1";
+ linux,code = <KEY_PAGEUP>;
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
+ gpio-key,wakeup;
+ };
+
+ pagedown-button {
+ label = "game 3";
+ linux,code = <KEY_PAGEDOWN>;
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
+ gpio-key,wakeup;
+ };
+
+ home-button {
+ label = "game 4";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
+ gpio-key,wakeup;
+ };
+
+ end-button {
+ label = "game 2";
+ linux,code = <KEY_END>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
+ gpio-key,wakeup;
+ };
+
+ right-shift {
+ label = "l";
+ linux,code = <KEY_RIGHTSHIFT>;
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
+ gpio-key,wakeup;
+ };
+
+ kp-plus {
+ label = "l2";
+ linux,code = <KEY_KPPLUS>;
+ gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
+ gpio-key,wakeup;
+ };
+
+ right-ctrl {
+ label = "r";
+ linux,code = <KEY_RIGHTCTRL>;
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
+ gpio-key,wakeup;
+ };
+
+ kp-minus {
+ label = "r2";
+ linux,code = <KEY_KPMINUS>;
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
+ gpio-key,wakeup;
+ };
+
+ left-ctrl {
+ label = "ctrl";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
+ gpio-key,wakeup;
+ };
+
+ hold {
+ label = "hold";
+ linux,code = <KEY_COFFEE>;
+ gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
+ gpio-key,wakeup;
+ };
+
+ left-alt {
+ label = "alt";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
+ gpio-key,wakeup;
+ };
+
+ lid {
+ label = "lid";
+ linux,code = <0x00>; /* SW_LID lid shut */
+ linux,input-type = <0x05>; /* EV_SW */
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
+ };
+ };
+};
+
+&omap3_pmx_core {
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ led_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */
+ >;
+ };
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */
+ >;
+ };
+
+};
+
+&omap3_pmx_core2 {
+ /* define in CPU specific file that includes this one
+ * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
+ */
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-reset";
+ ti,use_poweroff;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+
+ codec {
+ ti,ramp_delay_value = <3>;
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <6>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(0, 1, KEY_8)
+ MATRIX_KEY(0, 2, KEY_I)
+ MATRIX_KEY(0, 3, KEY_J)
+ MATRIX_KEY(0, 4, KEY_N)
+ MATRIX_KEY(0, 5, KEY_M)
+ MATRIX_KEY(1, 0, KEY_0)
+ MATRIX_KEY(1, 1, KEY_7)
+ MATRIX_KEY(1, 2, KEY_U)
+ MATRIX_KEY(1, 3, KEY_H)
+ MATRIX_KEY(1, 4, KEY_B)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(2, 0, KEY_BACKSPACE)
+ MATRIX_KEY(2, 1, KEY_6)
+ MATRIX_KEY(2, 2, KEY_Y)
+ MATRIX_KEY(2, 3, KEY_G)
+ MATRIX_KEY(2, 4, KEY_V)
+ MATRIX_KEY(2, 5, KEY_FN)
+ MATRIX_KEY(3, 0, KEY_O)
+ MATRIX_KEY(3, 1, KEY_5)
+ MATRIX_KEY(3, 2, KEY_T)
+ MATRIX_KEY(3, 3, KEY_F)
+ MATRIX_KEY(3, 4, KEY_C)
+ MATRIX_KEY(4, 0, KEY_P)
+ MATRIX_KEY(4, 1, KEY_4)
+ MATRIX_KEY(4, 2, KEY_R)
+ MATRIX_KEY(4, 3, KEY_D)
+ MATRIX_KEY(4, 4, KEY_X)
+ MATRIX_KEY(5, 0, KEY_K)
+ MATRIX_KEY(5, 1, KEY_3)
+ MATRIX_KEY(5, 2, KEY_E)
+ MATRIX_KEY(5, 3, KEY_S)
+ MATRIX_KEY(5, 4, KEY_Z)
+ MATRIX_KEY(6, 0, KEY_L)
+ MATRIX_KEY(6, 1, KEY_2)
+ MATRIX_KEY(6, 2, KEY_W)
+ MATRIX_KEY(6, 3, KEY_A)
+ MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
+ MATRIX_KEY(7, 0, KEY_ENTER)
+ MATRIX_KEY(7, 1, KEY_1)
+ MATRIX_KEY(7, 2, KEY_Q)
+ MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
+ MATRIX_KEY(7, 4, KEY_LEFTBRACE )
+ >;
+};
+
+/* backup battery charger */
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+/* MMC2 */
+&vmmc2 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+/* LCD */
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+/* USB Host PHY */
+&vaux2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+/* available on expansion connector */
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* ADS7846 and nubs */
+&vaux4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+/* power audio DAC and LID sensor */
+&vsim {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ /* no clients so we should disable clock */
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ bq27500@55 {
+ compatible = "ti,bq27500";
+ reg = <0x55>;
+ };
+
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc2>;
+ bus-width = <4>;
+ cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
+};
+
+/* bluetooth*/
+&uart1 {
+};
+
+/* spare (expansion connector) */
+&uart2 {
+};
+
+/* console (expansion connector) */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
+
+ x-loader@0 {
+ label = "xloader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "uboot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "uboot-env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "boot";
+ reg = <0x280000 0xa00000>;
+ };
+
+ filesystem@680000 {
+ label = "rootfs";
+ reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&mcspi1 {
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <1000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <30 0>; /* GPIO_94 */
+ pendown-gpio = <&gpio3 30 0>;
+ vcc-supply = <&vaux4>;
+
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <40>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ linux,wakeup;
+ };
+
+ lcd: lcd@1 {
+ reg = <1>; /* CS1 */
+ compatible = "omapdss,tpo,td043mtea1";
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */
+ vcc-supply = <&vaux1>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+
+};
+
+/* n/a - used as GPIOs */
+&mcbsp1 {
+};
+
+/* audio DAC */
+&mcbsp2 {
+};
+
+/* bluetooth */
+&mcbsp3 {
+};
+
+/* to twl4030*/
+&mcbsp4 {
+};
+
+&venc {
+ status = "ok";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "ok";
+ vdds_dsi-supply = <&vpll2>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index e89820a..7bd8d9a 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -8,7 +8,16 @@
*/
/dts-v1/;
-#include "omap34xx-hs.dtsi"
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
/ {
cpus {
@@ -45,7 +54,6 @@
/* McBSP2 is used for onboard sound, same as on beagle */
ti,mcbsp = <&mcbsp2>;
- ti,codec = <&twl_audio>;
};
/* Regulator to enable/switch the vcc of the Wifi module */
diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi
deleted file mode 100644
index 1ff62648..0000000
--- a/arch/arm/boot/dts/omap34xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap34xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
- status = "disabled";
-};
-
-&sham {
- status = "disabled";
-};
-
-&timer12 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 3819c1e..7bc8c0f 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
@@ -37,6 +39,21 @@
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x017c>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&omap3_scm_general 0xdc>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi
deleted file mode 100644
index 2c7febb..0000000
--- a/arch/arm/boot/dts/omap36xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap36xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
- status = "disabled";
-};
-
-&sham {
- status = "disabled";
-};
-
-&timer12 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 541704a..3502fe0 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/media/omap3-isp.h>
+
#include "omap3.dtsi"
/ {
@@ -69,6 +71,21 @@
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
+
+ isp: isp@480bc000 {
+ compatible = "ti,omap3-isp";
+ reg = <0x480bc000 0x12fc
+ 0x480bd800 0x0600>;
+ interrupts = <24>;
+ iommus = <&mmu_isp>;
+ syscon = <&omap3_scm_general 0x2f0>;
+ ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+ #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
};
diff --git a/include/dt-bindings/media/omap3-isp.h b/include/dt-bindings/media/omap3-isp.h
new file mode 100644
index 0000000..b18c60e
--- /dev/null
+++ b/include/dt-bindings/media/omap3-isp.h
@@ -0,0 +1,22 @@
+/*
+ * include/dt-bindings/media/omap3-isp.h
+ *
+ * Copyright (C) 2015 Sakari Ailus
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_OMAP3_ISP_H__
+#define __DT_BINDINGS_OMAP3_ISP_H__
+
+#define OMAP3ISP_PHY_TYPE_COMPLEX_IO 0
+#define OMAP3ISP_PHY_TYPE_CSIPHY 1
+
+#endif /* __DT_BINDINGS_OMAP3_ISP_H__ */