sh_eth: get SH7757 support out of #ifdef
Get the SH7757 code/data in the driver out of #ifdef by adding "sh7757-ether"
and "sh7757-gether" to the platform driver's ID table. Note that we can remove
SH_ETH_HAS_BOTH_MODULES and sh_eth_get_cpu_data().
Change the Ether/GEther platform devices' names in the SH platform code
accordingly.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 6d44a43..9860fc0 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -431,10 +431,9 @@
.rpadir = 1,
.rpadir_value = 0x00020000, /* NET_IP_ALIGN assumed to be 2 */
};
-#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
-#define SH_ETH_HAS_BOTH_MODULES 1
+#endif
-static void sh_eth_set_rate(struct net_device *ndev)
+static void sh_eth_set_rate_sh7757(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
@@ -451,9 +450,9 @@
}
/* SH7757 */
-static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
- .set_duplex = sh_eth_set_duplex,
- .set_rate = sh_eth_set_rate,
+static struct sh_eth_cpu_data sh7757_data = {
+ .set_duplex = sh_eth_set_duplex,
+ .set_rate = sh_eth_set_rate_sh7757,
.eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
.rmcr_value = 0x00000001,
@@ -518,7 +517,7 @@
}
/* SH7757(GETHERC) */
-static struct sh_eth_cpu_data sh_eth_my_cpu_data_giga = {
+static struct sh_eth_cpu_data sh7757_data_giga = {
.chip_reset = sh_eth_chip_reset_giga,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_giga,
@@ -549,15 +548,6 @@
.tsu = 1,
};
-static struct sh_eth_cpu_data *sh_eth_get_cpu_data(struct sh_eth_private *mdp)
-{
- if (sh_eth_is_gether(mdp))
- return &sh_eth_my_cpu_data_giga;
- else
- return &sh_eth_my_cpu_data;
-}
-#endif
-
static void sh_eth_chip_reset(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
@@ -2577,11 +2567,7 @@
mdp->reg_offset = sh_eth_get_register_offset(pd->register_type);
/* set cpu data */
-#if defined(SH_ETH_HAS_BOTH_MODULES)
- mdp->cd = sh_eth_get_cpu_data(mdp);
-#else
mdp->cd = &sh_eth_my_cpu_data;
-#endif
if (id->driver_data)
mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
sh_eth_set_default_cpu_data(mdp->cd);
@@ -2702,6 +2688,8 @@
{ "sh7619-ether", (kernel_ulong_t)&sh7619_data },
{ "sh771x-ether", (kernel_ulong_t)&sh771x_data },
{ "sh7734-gether", (kernel_ulong_t)&sh7734_data },
+ { "sh7757-ether", (kernel_ulong_t)&sh7757_data },
+ { "sh7757-gether", (kernel_ulong_t)&sh7757_data_giga },
{ "sh7763-gether", (kernel_ulong_t)&sh7763_data },
{ "r8a7740-gether", (kernel_ulong_t)&r8a7740_data },
{ CARDNAME },