Merge branches 'acpi-soc' and 'acpi-tables'
* acpi-soc:
ACPI: APD: Add AMD misc clock handler support
clk: x86: Add ST oscout platform clock
ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2
* acpi-tables:
ACPI / tables: improve comments regarding acpi_parse_entries_array()
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index d553b00..2664452 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -11,6 +11,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/platform_data/clk-st.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/clkdev.h>
@@ -72,6 +73,47 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
}
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+
+static int misc_check_res(struct acpi_resource *ares, void *data)
+{
+ struct resource res;
+
+ return !acpi_dev_resource_memory(ares, &res);
+}
+
+static int st_misc_setup(struct apd_private_data *pdata)
+{
+ struct acpi_device *adev = pdata->adev;
+ struct platform_device *clkdev;
+ struct st_clk_data *clk_data;
+ struct resource_entry *rentry;
+ struct list_head resource_list;
+ int ret;
+
+ clk_data = devm_kzalloc(&adev->dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list, misc_check_res,
+ NULL);
+ if (ret < 0)
+ return -ENOENT;
+
+ list_for_each_entry(rentry, &resource_list, node) {
+ clk_data->base = devm_ioremap(&adev->dev, rentry->res->start,
+ resource_size(rentry->res));
+ break;
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ clkdev = platform_device_register_data(&adev->dev, "clk-st",
+ PLATFORM_DEVID_NONE, clk_data,
+ sizeof(*clk_data));
+ return PTR_ERR_OR_ZERO(clkdev);
+}
+
static const struct apd_device_desc cz_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
@@ -94,6 +136,10 @@ static const struct apd_device_desc cz_uart_desc = {
.fixed_clk_rate = 48000000,
.properties = uart_properties,
};
+
+static const struct apd_device_desc st_misc_desc = {
+ .setup = st_misc_setup,
+};
#endif
#ifdef CONFIG_ARM64
@@ -179,6 +225,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
+ { "AMD0040", APD_ADDR(st_misc_desc)},
#endif
#ifdef CONFIG_ARM64
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 2bcffec..cb6ac5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -69,6 +69,10 @@ ACPI_MODULE_NAME("acpi_lpss");
#define LPSS_SAVE_CTX BIT(4)
#define LPSS_NO_D3_DELAY BIT(5)
+/* Crystal Cove PMIC shares same ACPI ID between different platforms */
+#define BYT_CRC_HRV 2
+#define CHT_CRC_HRV 3
+
struct lpss_private_data;
struct lpss_device_desc {
@@ -162,7 +166,7 @@ static void byt_pwm_setup(struct lpss_private_data *pdata)
if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
return;
- if (!acpi_dev_present("INT33FD", NULL, -1))
+ if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV))
pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
}
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 849c4fb..4a3410a 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -222,7 +222,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
* acpi_parse_entries_array - for each proc_num find a suitable subtable
*
* @id: table id (for debugging purposes)
- * @table_size: single entry size
+ * @table_size: size of the root table
* @table_header: where does the table start?
* @proc: array of acpi_subtable_proc struct containing entry id
* and associated handler with it
@@ -233,6 +233,11 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
* on it. Assumption is that there's only single handler for particular
* entry id.
*
+ * The table_size is not the size of the complete ACPI table (the length
+ * field in the header struct), but only the size of the root table; i.e.,
+ * the offset from the very first byte of the complete ACPI table, to the
+ * first byte of the very first subtable.
+ *
* On success returns sum of all matching entries for all proc handlers.
* Otherwise, -ENODEV or -EINVAL is returned.
*/
@@ -400,7 +405,7 @@ int __init acpi_table_parse(char *id, acpi_tbl_table_handler handler)
return -ENODEV;
}
-/*
+/*
* The BIOS is supposed to supply a single APIC/MADT,
* but some report two. Provide a knob to use either.
* (don't you wish instance 0 and 1 were not the same?)
diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
index 1367afb..00303bc 100644
--- a/drivers/clk/x86/Makefile
+++ b/drivers/clk/x86/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
+obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-st.o
clk-x86-lpss-objs := clk-lpt.o
obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
-obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
new file mode 100644
index 0000000..fb62f39
--- /dev/null
+++ b/drivers/clk/x86/clk-st.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: MIT
+/*
+ * clock framework for AMD Stoney based clocks
+ *
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_data/clk-st.h>
+#include <linux/platform_device.h>
+
+/* Clock Driving Strength 2 register */
+#define CLKDRVSTR2 0x28
+/* Clock Control 1 register */
+#define MISCCLKCNTL1 0x40
+/* Auxiliary clock1 enable bit */
+#define OSCCLKENB 2
+/* 25Mhz auxiliary output clock freq bit */
+#define OSCOUT1CLK25MHZ 16
+
+#define ST_CLK_48M 0
+#define ST_CLK_25M 1
+#define ST_CLK_MUX 2
+#define ST_CLK_GATE 3
+#define ST_MAX_CLKS 4
+
+static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
+static struct clk_hw *hws[ST_MAX_CLKS];
+
+static int st_clk_probe(struct platform_device *pdev)
+{
+ struct st_clk_data *st_data;
+
+ st_data = dev_get_platdata(&pdev->dev);
+ if (!st_data || !st_data->base)
+ return -EINVAL;
+
+ hws[ST_CLK_48M] = clk_hw_register_fixed_rate(NULL, "clk48MHz", NULL, 0,
+ 48000000);
+ hws[ST_CLK_25M] = clk_hw_register_fixed_rate(NULL, "clk25MHz", NULL, 0,
+ 25000000);
+
+ hws[ST_CLK_MUX] = clk_hw_register_mux(NULL, "oscout1_mux",
+ clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
+ 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
+
+ clk_set_parent(hws[ST_CLK_MUX]->clk, hws[ST_CLK_25M]->clk);
+
+ hws[ST_CLK_GATE] = clk_hw_register_gate(NULL, "oscout1", "oscout1_mux",
+ 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+
+ clk_hw_register_clkdev(hws[ST_CLK_GATE], "oscout1", NULL);
+
+ return 0;
+}
+
+static int st_clk_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ST_MAX_CLKS; i++)
+ clk_hw_unregister(hws[i]);
+ return 0;
+}
+
+static struct platform_driver st_clk_driver = {
+ .driver = {
+ .name = "clk-st",
+ .suppress_bind_attrs = true,
+ },
+ .probe = st_clk_probe,
+ .remove = st_clk_remove,
+};
+builtin_platform_driver(st_clk_driver);
diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h
new file mode 100644
index 0000000..7cdb6a4
--- /dev/null
+++ b/include/linux/platform_data/clk-st.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * clock framework for AMD Stoney based clock
+ *
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ */
+
+#ifndef __CLK_ST_H
+#define __CLK_ST_H
+
+#include <linux/compiler.h>
+
+struct st_clk_data {
+ void __iomem *base;
+};
+
+#endif /* __CLK_ST_H */