Merge tag 'phy-for-4.11-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.11-rc
*) Revert USB3 PHY support for Broadcom NSP SoC
*) Fix compiler error on qcom-usb-hs when depends on EXTCON
is not added
*) Fix error handling in phy-exynos-pcie
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
deleted file mode 100644
index e68ae5d..0000000
--- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
- of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
- mdio@0 {
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_phy: usb-phy@10 {
- compatible = "brcm,nsp-usb3-phy";
- reg = <0x10>;
- usb3-ctrl-syscon = <&usb3_ctrl>;
- #phy-cells = <0>;
- status = "disabled";
- };
- };
-
- usb3_ctrl: syscon@104408 {
- compatible = "brcm,nsp-usb3-ctrl", "syscon";
- reg = <0x104408 0x3fc>;
- };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index dc5277a..005cadb 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -449,6 +449,7 @@
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
select GENERIC_PHY
help
Support for the USB high-speed ULPI compliant phy on Qualcomm
@@ -510,12 +511,4 @@
and GXBB SoCs.
If unsure, say N.
-config PHY_NSP_USB3
- tristate "Broadcom NorthStar plus USB3 PHY driver"
- depends on OF && (ARCH_BCM_NSP || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_NSP
- help
- Enable this to support the Broadcom Northstar plus USB3 PHY.
- If unsure, say N.
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index e7b0feb..dd8f3b5 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -62,4 +62,3 @@
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
-obj-$(CONFIG_PHY_NSP_USB3) += phy-bcm-nsp-usb3.o
diff --git a/drivers/phy/phy-bcm-nsp-usb3.c b/drivers/phy/phy-bcm-nsp-usb3.c
deleted file mode 100644
index 49024ea..0000000
--- a/drivers/phy/phy-bcm-nsp-usb3.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mdio.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-
-#define NSP_USB3_RST_CTRL_OFFSET 0x3f8
-
-/* mdio reg access */
-#define NSP_USB3_PHY_BASE_ADDR_REG 0x1f
-
-#define NSP_USB3_PHY_PLL30_BLOCK 0x8000
-#define NSP_USB3_PLL_CONTROL 0x01
-#define NSP_USB3_PLLA_CONTROL0 0x0a
-#define NSP_USB3_PLLA_CONTROL1 0x0b
-
-#define NSP_USB3_PHY_TX_PMD_BLOCK 0x8040
-#define NSP_USB3_TX_PMD_CONTROL1 0x01
-
-#define NSP_USB3_PHY_PIPE_BLOCK 0x8060
-#define NSP_USB3_LFPS_CMP 0x02
-#define NSP_USB3_LFPS_DEGLITCH 0x03
-
-struct nsp_usb3_phy {
- struct regmap *usb3_ctrl;
- struct phy *phy;
- struct mdio_device *mdiodev;
-};
-
-static int nsp_usb3_phy_init(struct phy *phy)
-{
- struct nsp_usb3_phy *iphy = phy_get_drvdata(phy);
- struct mii_bus *bus = iphy->mdiodev->bus;
- int addr = iphy->mdiodev->addr;
- u32 data;
- int rc;
-
- rc = regmap_read(iphy->usb3_ctrl, 0, &data);
- if (rc)
- return rc;
- data |= 1;
- rc = regmap_write(iphy->usb3_ctrl, 0, data);
- if (rc)
- return rc;
-
- rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 1);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_PLL30_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x1000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL0, 0x6400);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0xc000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0x8000);
- if (rc)
- return rc;
-
- rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 0);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x9000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_PIPE_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_CMP, 0xf30d);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_DEGLITCH, 0x6302);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_TX_PMD_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_TX_PMD_CONTROL1, 0x1003);
-
- return rc;
-}
-
-static struct phy_ops nsp_usb3_phy_ops = {
- .init = nsp_usb3_phy_init,
- .owner = THIS_MODULE,
-};
-
-static int nsp_usb3_phy_probe(struct mdio_device *mdiodev)
-{
- struct device *dev = &mdiodev->dev;
- struct phy_provider *provider;
- struct nsp_usb3_phy *iphy;
-
- iphy = devm_kzalloc(dev, sizeof(*iphy), GFP_KERNEL);
- if (!iphy)
- return -ENOMEM;
- iphy->mdiodev = mdiodev;
-
- iphy->usb3_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "usb3-ctrl-syscon");
- if (IS_ERR(iphy->usb3_ctrl))
- return PTR_ERR(iphy->usb3_ctrl);
-
- iphy->phy = devm_phy_create(dev, dev->of_node, &nsp_usb3_phy_ops);
- if (IS_ERR(iphy->phy)) {
- dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(iphy->phy);
- }
-
- phy_set_drvdata(iphy->phy, iphy);
-
- provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(provider)) {
- dev_err(dev, "could not register PHY provider\n");
- return PTR_ERR(provider);
- }
-
- return 0;
-}
-
-static const struct of_device_id nsp_usb3_phy_of_match[] = {
- {.compatible = "brcm,nsp-usb3-phy",},
- { /* sentinel */ }
-};
-
-static struct mdio_driver nsp_usb3_phy_driver = {
- .mdiodrv = {
- .driver = {
- .name = "nsp-usb3-phy",
- .of_match_table = nsp_usb3_phy_of_match,
- },
- },
- .probe = nsp_usb3_phy_probe,
-};
-
-mdio_module_driver(nsp_usb3_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom NSP USB3 PHY driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com");
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
index 4f60b83..60baf25 100644
--- a/drivers/phy/phy-exynos-pcie.c
+++ b/drivers/phy/phy-exynos-pcie.c
@@ -254,8 +254,8 @@ static int exynos_pcie_phy_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
exynos_phy->blk_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(exynos_phy->phy_base))
- return PTR_ERR(exynos_phy->phy_base);
+ if (IS_ERR(exynos_phy->blk_base))
+ return PTR_ERR(exynos_phy->blk_base);
exynos_phy->drv_data = drv_data;