at91: at91-ohci: configure overcurrent pins as input GPIOs
As a new overcurrent_pin[] array has been added to the at91_usbh_data
structure, those pins must be muxed to work properly. This commit
implements this muxing for all AT91 SoCs that support the AT91 OHCI.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[nicolas.ferre@atmel.com: added i variable declaration for the loop]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dba0d8d..b46615a 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -80,6 +80,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7227755..3f27113 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -60,9 +60,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91rm9200_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f4..344075f 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -61,9 +61,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0f91792..3b8fb79 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -64,9 +64,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91sam9261_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a050f41..d4aef76 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -74,6 +74,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 600bffb..e4a9857 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -124,6 +124,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_ohci_data = *data;
platform_device_register(&at91_usbh_ohci_device);
}