mtd: atmel_nand: move the sanity check to the beginning of pmecc_enable()
It is better to do the sanity check for the parameter before any hardware
operation.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 1ffa52f..0e365da 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -905,15 +905,15 @@
{
u32 val;
- pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
- pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
- val = pmecc_readl_relaxed(host->ecc, CFG);
-
if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
return;
}
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ val = pmecc_readl_relaxed(host->ecc, CFG);
+
if (ecc_op == NAND_ECC_READ)
pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
| PMECC_CFG_AUTO_ENABLE);