Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
new file mode 100644
index 0000000..83f552f
--- /dev/null
+++ b/include/asm-arm/arch-imx/debug-macro.S
@@ -0,0 +1,34 @@
+/* linux/include/asm-arm/arch-imx/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x00000000 @ physical
+ movne \rx, #0xe0000000 @ virtual
+ orr \rx, \rx, #0x00200000
+ orr \rx, \rx, #0x00006000 @ UART1 offset
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h
new file mode 100644
index 0000000..dbdc017
--- /dev/null
+++ b/include/asm-arm/arch-imx/dma.h
@@ -0,0 +1,71 @@
+/*
+ * linux/include/asm-arm/imxads/dma.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS 0xffffffff
+
+#define MAX_DMA_CHANNELS 0
+
+/*
+ * DMA registration
+ */
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 3,
+ DMA_PRIO_LOW = 6
+} imx_dma_prio;
+
+int imx_request_dma(char *name, imx_dma_prio prio,
+ void (*irq_handler) (int, void *, struct pt_regs *),
+ void (*err_handler) (int, void *, struct pt_regs *),
+ void *data);
+
+void imx_free_dma(int dma_ch);
+
+
+#define DMA_REQ_UART3_T 2
+#define DMA_REQ_UART3_R 3
+#define DMA_REQ_SSI2_T 4
+#define DMA_REQ_SSI2_R 5
+#define DMA_REQ_CSI_STAT 6
+#define DMA_REQ_CSI_R 7
+#define DMA_REQ_MSHC 8
+#define DMA_REQ_DSPA_DCT_DOUT 9
+#define DMA_REQ_DSPA_DCT_DIN 10
+#define DMA_REQ_DSPA_MAC 11
+#define DMA_REQ_EXT 12
+#define DMA_REQ_SDHC 13
+#define DMA_REQ_SPI1_R 14
+#define DMA_REQ_SPI1_T 15
+#define DMA_REQ_SSI_T 16
+#define DMA_REQ_SSI_R 17
+#define DMA_REQ_ASP_DAC 18
+#define DMA_REQ_ASP_ADC 19
+#define DMA_REQ_USP_EP(x) (20+(x))
+#define DMA_REQ_SPI2_R 26
+#define DMA_REQ_SPI2_T 27
+#define DMA_REQ_UART2_T 28
+#define DMA_REQ_UART2_R 29
+#define DMA_REQ_UART1_T 30
+#define DMA_REQ_UART1_R 31
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
new file mode 100644
index 0000000..b40ea7c
--- /dev/null
+++ b/include/asm-arm/arch-imx/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-imx/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+ .macro disable_fiq
+ .endm
+#define AITC_NIVECSR 0x40
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, =IO_ADDRESS(IMX_AITC_BASE)
+ @ Load offset & priority of the highest priority
+ @ interrupt pending.
+ ldr \irqnr, [\irqstat, #AITC_NIVECSR]
+ @ Shift off the priority leaving the offset or
+ @ "interrupt number"
+ mov \irqnr, \irqnr, lsr #16
+ ldr \irqstat, =1 @ dummy compare
+ ldr \base, =0xFFFF // invalid interrupt
+ cmp \irqnr, \base
+ bne 1001f
+ ldr \irqstat, =0
+1001:
+ tst \irqstat, #1 @ to make the condition code = TRUE
+ .endm
+
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
new file mode 100644
index 0000000..adffb6a
--- /dev/null
+++ b/include/asm-arm/arch-imx/hardware.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/asm-arm/arch-imx/hardware.h
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS 0x00200000
+#define IMX_IO_SIZE 0x00100000
+#define IMX_IO_BASE 0xe0000000
+
+#define IMX_CS0_PHYS 0x10000000
+#define IMX_CS0_SIZE 0x02000000
+#define IMX_CS0_VIRT 0xe8000000
+
+#define IMX_CS1_PHYS 0x12000000
+#define IMX_CS1_SIZE 0x01000000
+#define IMX_CS1_VIRT 0xea000000
+
+#define IMX_CS2_PHYS 0x13000000
+#define IMX_CS2_SIZE 0x01000000
+#define IMX_CS2_VIRT 0xeb000000
+
+#define IMX_CS3_PHYS 0x14000000
+#define IMX_CS3_SIZE 0x01000000
+#define IMX_CS3_VIRT 0xec000000
+
+#define IMX_CS4_PHYS 0x15000000
+#define IMX_CS4_SIZE 0x01000000
+#define IMX_CS4_VIRT 0xed000000
+
+#define IMX_CS5_PHYS 0x16000000
+#define IMX_CS5_SIZE 0x01000000
+#define IMX_CS5_VIRT 0xee000000
+
+#define IMX_FB_VIRT 0xF1000000
+#define IMX_FB_SIZE (256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+/* get frequencies in Hz */
+extern unsigned int imx_get_system_clk(void);
+extern unsigned int imx_get_mcu_clk(void);
+extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */
+extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */
+extern unsigned int imx_get_perclk3(void); /* SSI */
+extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/
+ /* I2C, DMA */
+#endif
+
+#define MAXIRQNUM 62
+#define MAXFIQNUM 62
+#define MAXSWINUM 62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE 0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
new file mode 100644
index 0000000..f32c203
--- /dev/null
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -0,0 +1,548 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ * Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ * Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
+
+/* PLL registers */
+#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
+#define CSCR_SYSTEM_SEL (1<<16)
+
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+#define CSCR_MPLL_RESTART (1<<21)
+
+/*
+ * GPIO Module and I/O Multiplexer
+ * x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT (1<<7)
+#define GPIO_IN (0<<7)
+#define GPIO_PUEN (1<<8)
+
+#define GPIO_PF (0<<9)
+#define GPIO_AF (1<<9)
+
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN (0<<10)
+#define GPIO_BIN (1<<10)
+#define GPIO_CIN (2<<10)
+#define GPIO_GPIO (3<<10)
+
+#define GPIO_AOUT (1<<12)
+#define GPIO_BOUT (1<<13)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 )
+#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
+#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
+#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
+#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
+#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
+#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * DMA Controller
+ */
+#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
+#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
+#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
+#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
+#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
+#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
+#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
+#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
+#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
+#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
+#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
+#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
+#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
+#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
+#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
+#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
+#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
+#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
+
+#define DCR_DRST (1<<1)
+#define DCR_DEN (1<<0)
+#define DBTOCR_EN (1<<15)
+#define DBTOCR_CNT(x) ((x) & 0x7fff )
+#define CNTR_CNT(x) ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR ( 0x0 << 12 )
+#define CCR_DMOD_2D ( 0x1 << 12 )
+#define CCR_DMOD_FIFO ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR ( 0x0 << 10 )
+#define CCR_SMOD_2D ( 0x1 << 10 )
+#define CCR_SMOD_FIFO ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
+#define CCR_MDIR_DEC (1<<9)
+#define CCR_MSEL_B (1<<8)
+#define CCR_DSIZ_32 ( 0x0 << 6 )
+#define CCR_DSIZ_8 ( 0x1 << 6 )
+#define CCR_DSIZ_16 ( 0x2 << 6 )
+#define CCR_SSIZ_32 ( 0x0 << 4 )
+#define CCR_SSIZ_8 ( 0x1 << 4 )
+#define CCR_SSIZ_16 ( 0x2 << 4 )
+#define CCR_REN (1<<3)
+#define CCR_RPT (1<<2)
+#define CCR_FRC (1<<1)
+#define CCR_CEN (1<<0)
+#define RTOR_EN (1<<15)
+#define RTOR_CLK (1<<14)
+#define RTOR_PSC (1<<13)
+
+/*
+ * Interrupt controller
+ */
+
+#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
+#define INTCNTL_FIAD (1<<19)
+#define INTCNTL_NIAD (1<<20)
+
+#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
+#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
+#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
+#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
+#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
+
+/*
+ * General purpose timers
+ */
+#define IMX_TCTL(x) __REG( 0x00 + (x))
+#define TCTL_SWR (1<<15)
+#define TCTL_FRR (1<<8)
+#define TCTL_CAP_RIS (1<<6)
+#define TCTL_CAP_FAL (2<<6)
+#define TCTL_CAP_RIS_FAL (3<<6)
+#define TCTL_OM (1<<5)
+#define TCTL_IRQEN (1<<4)
+#define TCTL_CLK_PCLK1 (1<<1)
+#define TCTL_CLK_PCLK1_16 (2<<1)
+#define TCTL_CLK_TIN (3<<1)
+#define TCTL_CLK_32 (4<<1)
+#define TCTL_TEN (1<<0)
+
+#define IMX_TPRER(x) __REG( 0x04 + (x))
+#define IMX_TCMP(x) __REG( 0x08 + (x))
+#define IMX_TCR(x) __REG( 0x0C + (x))
+#define IMX_TCN(x) __REG( 0x10 + (x))
+#define IMX_TSTAT(x) __REG( 0x14 + (x))
+#define TSTAT_CAPT (1<<1)
+#define TSTAT_COMP (1<<0)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y) ( (y) & 0x1ff )
+
+#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x) ( (x) & 0x3ff )
+
+#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1 (1<<31)
+#define CPOS_CC0 (1<<30)
+#define CPOS_OP (1<<28)
+#define CPOS_CXP(x) (((x) & 3ff) << 16)
+#define CPOS_CYP(y) ((y) & 0x1ff)
+
+#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN (1<<31)
+#define LCWHB_CW(w) (((w) & 0x1f) << 24)
+#define LCWHB_CH(h) (((h) & 0x1f) << 16)
+#define LCWHB_BD(x) ((x) & 0xff)
+
+#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT (1<<31)
+#define PCR_COLOR (1<<30)
+#define PCR_PBSIZ_1 (0<<28)
+#define PCR_PBSIZ_2 (1<<28)
+#define PCR_PBSIZ_4 (2<<28)
+#define PCR_PBSIZ_8 (3<<28)
+#define PCR_BPIX_1 (0<<25)
+#define PCR_BPIX_2 (1<<25)
+#define PCR_BPIX_4 (2<<25)
+#define PCR_BPIX_8 (3<<25)
+#define PCR_BPIX_12 (4<<25)
+#define PCR_BPIX_16 (4<<25)
+#define PCR_PIXPOL (1<<24)
+#define PCR_FLMPOL (1<<23)
+#define PCR_LPPOL (1<<22)
+#define PCR_CLKPOL (1<<21)
+#define PCR_OEPOL (1<<20)
+#define PCR_SCLKIDLE (1<<19)
+#define PCR_END_SEL (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS (1<<16)
+#define PCR_ACD_SEL (1<<15)
+#define PCR_ACD(x) (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL (1<<7)
+#define PCR_SHARP (1<<6)
+#define PCR_PCD(x) ((x) & 0x3f)
+
+#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x) ((x) & 1f)
+
+#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x) (((x) & 0xf))
+
+#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK (1<<15)
+#define PWMR_SCR1 (1<<10)
+#define PWMR_SCR0 (1<<9)
+#define PWMR_CC_EN (1<<8)
+#define PWMR_PW(x) ((x) & 0xff)
+
+#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST (1<<31)
+#define DMACR_HM(x) (((x) & 0xf) << 16)
+#define DMACR_TM(x) ((x) &0xf)
+
+#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN (1<<1)
+#define RMCR_SELF_REF (1<<0)
+
+#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN (1<<2)
+#define LCDICR_INT_CON (1)
+
+#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF (1<<1)
+#define LCDISR_BOF (1<<0)
+
+/*
+ * UART Module. Takes the UART base address as argument
+ */
+#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */
+#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */
+#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */
+#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */
+#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */
+#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */
+#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */
+#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */
+#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */
+#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */
+#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */
+#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */
+#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */
+#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */
+#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */
+#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */
+#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */
+#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */
+#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */
+#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */
+#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */
+#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */
+#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define URXD_CHARRDY (1<<15)
+#define URXD_ERR (1<<14)
+#define URXD_OVRRUN (1<<13)
+#define URXD_FRMERR (1<<12)
+#define URXD_BRK (1<<11)
+#define URXD_PRERR (1<<10)
+#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
+#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
+#define UCR1_IREN (1<<7) /* Infrared interface enable */
+#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
+#define UCR1_SNDBRK (1<<4) /* Send break */
+#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
+#define UCR1_DOZE (1<<1) /* Doze */
+#define UCR1_UARTEN (1<<0) /* UART enabled */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_CTS (1<<12) /* Clear to send */
+#define UCR2_ESCEN (1<<11) /* Escape enable */
+#define UCR2_PREN (1<<8) /* Parity enable */
+#define UCR2_PROE (1<<7) /* Parity odd/even */
+#define UCR2_STPB (1<<6) /* Stop */
+#define UCR2_WS (1<<5) /* Word size */
+#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
+#define UCR2_TXEN (1<<2) /* Transmitter enabled */
+#define UCR2_RXEN (1<<1) /* Receiver enabled */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN (1<<12) /* Parity enable */
+#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR (1<<10) /* Data set ready */
+#define UCR3_DCD (1<<9) /* Data carrier detect */
+#define UCR3_RI (1<<8) /* Ring indicator */
+#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
+#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
+#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
+#define USR2_ORE (1<<1) /* Overrun error */
+#define USR2_RDR (1<<0) /* Recv data ready */
+#define UTS_FRCPERR (1<<13) /* Force parity error */
+#define UTS_LOOP (1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
+#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_SOFTRST (1<<0) /* Software reset */
+
+#endif // _IMX_REGS_H
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
new file mode 100644
index 0000000..28a4cca
--- /dev/null
+++ b/include/asm-arm/arch-imx/io.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/arch-imxads/io.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h
new file mode 100644
index 0000000..545e065
--- /dev/null
+++ b/include/asm-arm/arch-imx/irq.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-arm/arch-imxads/irq.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define fixup_irq(i) (i)
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
new file mode 100644
index 0000000..238197c
--- /dev/null
+++ b/include/asm-arm/arch-imx/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * linux/include/asm-arm/arch-imxads/irqs.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <asm/arch/hardware.h>
+
+/*
+ * IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT 0
+#define CSI_INT 6
+#define DSPA_MAC_INT 7
+#define DSPA_INT 8
+#define COMP_INT 9
+#define MSHC_XINT 10
+#define GPIO_INT_PORTA 11
+#define GPIO_INT_PORTB 12
+#define GPIO_INT_PORTC 13
+#define LCDC_INT 14
+#define SIM_INT 15
+#define SIM_DATA_INT 16
+#define RTC_INT 17
+#define RTC_SAMINT 18
+#define UART2_MINT_PFERR 19
+#define UART2_MINT_RTS 20
+#define UART2_MINT_DTR 21
+#define UART2_MINT_UARTC 22
+#define UART2_MINT_TX 23
+#define UART2_MINT_RX 24
+#define UART1_MINT_PFERR 25
+#define UART1_MINT_RTS 26
+#define UART1_MINT_DTR 27
+#define UART1_MINT_UARTC 28
+#define UART1_MINT_TX 29
+#define UART1_MINT_RX 30
+#define VOICE_DAC_INT 31
+#define VOICE_ADC_INT 32
+#define PEN_DATA_INT 33
+#define PWM_INT 34
+#define SDHC_INT 35
+#define I2C_INT 39
+#define CSPI_INT 41
+#define SSI_TX_INT 42
+#define SSI_TX_ERR_INT 43
+#define SSI_RX_INT 44
+#define SSI_RX_ERR_INT 45
+#define TOUCH_INT 46
+#define USBD_INT0 47
+#define USBD_INT1 48
+#define USBD_INT2 49
+#define USBD_INT3 50
+#define USBD_INT4 51
+#define USBD_INT5 52
+#define USBD_INT6 53
+#define BTSYS_INT 55
+#define BTTIM_INT 56
+#define BTWUI_INT 57
+#define TIM2_INT 58
+#define TIM1_INT 59
+#define DMA_ERR 60
+#define DMA_INT 61
+#define GPIO_INT_PORTD 62
+
+#define IMX_IRQS (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ * the following pins are connected to the outside
+ * world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ * - mapping the interrupts without holes would get
+ * far more complicated
+ * - Motorola could well decide to bring some processor
+ * with more pins connected
+ */
+
+#define IRQ_GPIOA(x) (IMX_IRQS + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
new file mode 100644
index 0000000..116a91f
--- /dev/null
+++ b/include/asm-arm/arch-imx/memory.h
@@ -0,0 +1,38 @@
+/*
+ * linux/include/asm-arm/arch-imx/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET (0x08000000UL)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus__is_a_macro
+#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt__is_a_macro
+#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
new file mode 100644
index 0000000..d90fa4b
--- /dev/null
+++ b/include/asm-arm/arch-imx/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * linux/include/asm-arm/arch-imx/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS 0x10000000
+#define MX1ADS_FLASH_SIZE (16*1024*1024)
+
+#define IMX_FB_PHYS (0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h
new file mode 100644
index 0000000..7c724f0
--- /dev/null
+++ b/include/asm-arm/arch-imx/param.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-arm/arch-imx/param.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
new file mode 100644
index 0000000..c645fe9
--- /dev/null
+++ b/include/asm-arm/arch-imx/system.h
@@ -0,0 +1,40 @@
+/*
+ * linux/include/asm-arm/arch-imxads/system.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+
+#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h
new file mode 100644
index 0000000..d65ab3c
--- /dev/null
+++ b/include/asm-arm/arch-imx/timex.h
@@ -0,0 +1,27 @@
+/*
+ * linux/include/asm-arm/imx/timex.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/arch/hardware.h>
+#define CLOCK_TICK_RATE (CLK32)
+
+#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
new file mode 100644
index 0000000..096077f
--- /dev/null
+++ b/include/asm-arm/arch-imx/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ * linux/include/asm-arm/arch-imxads/uncompress.h
+ *
+ *
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR 0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void
+putstr(const char *s)
+{
+ unsigned long serial_port;
+
+ do {
+ serial_port = UART1_BASE;
+ if ( UART(UCR1) & UCR1_UARTEN )
+ break;
+ serial_port = UART2_BASE;
+ if ( UART(UCR1) & UCR1_UARTEN )
+ break;
+ return;
+ } while(0);
+
+ while (*s) {
+ while ( !(UART(USR2) & USR2_TXFE) )
+ barrier();
+
+ UART(TXR) = *s;
+
+ if (*s == '\n') {
+ while ( !(UART(USR2) & USR2_TXFE) )
+ barrier();
+
+ UART(TXR) = '\r';
+ }
+ s++;
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
new file mode 100644
index 0000000..252038f
--- /dev/null
+++ b/include/asm-arm/arch-imx/vmalloc.h
@@ -0,0 +1,32 @@
+/*
+ * linux/include/asm-arm/arch-imx/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)