Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
new file mode 100644
index 0000000..fc51937
--- /dev/null
+++ b/drivers/net/Space.c
@@ -0,0 +1,412 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Holds initial configuration information for devices.
+ *
+ * Version: @(#)Space.c 1.0.7 08/12/93
+ *
+ * Authors: Ross Biro, <bir7@leland.Stanford.Edu>
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Donald J. Becker, <becker@scyld.com>
+ *
+ * Changelog:
+ * Stephen Hemminger (09/2003)
+ * - get rid of pre-linked dev list, dynamic device allocation
+ * Paul Gortmaker (03/2002)
+ * - struct init cleanup, enable multiple ISA autoprobes.
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
+ * - fix sbni: s/device/net_device/
+ * Paul Gortmaker (06/98):
+ * - sort probes in a sane way, make sure all (safe) probes
+ * get run once & failed autoprobes don't autoprobe again.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/trdevice.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netlink.h>
+#include <linux/divert.h>
+
+/* A unified ethernet device probe. This is the easiest way to have every
+ ethernet adaptor have the name "eth[0123...]".
+ */
+
+extern struct net_device *ne2_probe(int unit);
+extern struct net_device *hp100_probe(int unit);
+extern struct net_device *ultra_probe(int unit);
+extern struct net_device *ultra32_probe(int unit);
+extern struct net_device *wd_probe(int unit);
+extern struct net_device *el2_probe(int unit);
+extern struct net_device *ne_probe(int unit);
+extern struct net_device *hp_probe(int unit);
+extern struct net_device *hp_plus_probe(int unit);
+extern struct net_device *express_probe(int unit);
+extern struct net_device *eepro_probe(int unit);
+extern struct net_device *at1700_probe(int unit);
+extern struct net_device *fmv18x_probe(int unit);
+extern struct net_device *eth16i_probe(int unit);
+extern struct net_device *i82596_probe(int unit);
+extern struct net_device *ewrk3_probe(int unit);
+extern struct net_device *el1_probe(int unit);
+extern struct net_device *wavelan_probe(int unit);
+extern struct net_device *arlan_probe(int unit);
+extern struct net_device *el16_probe(int unit);
+extern struct net_device *elmc_probe(int unit);
+extern struct net_device *skmca_probe(int unit);
+extern struct net_device *elplus_probe(int unit);
+extern struct net_device *ac3200_probe(int unit);
+extern struct net_device *es_probe(int unit);
+extern struct net_device *lne390_probe(int unit);
+extern struct net_device *e2100_probe(int unit);
+extern struct net_device *ni5010_probe(int unit);
+extern struct net_device *ni52_probe(int unit);
+extern struct net_device *ni65_probe(int unit);
+extern struct net_device *sonic_probe(int unit);
+extern struct net_device *SK_init(int unit);
+extern struct net_device *seeq8005_probe(int unit);
+extern struct net_device *smc_init(int unit);
+extern struct net_device *atarilance_probe(int unit);
+extern struct net_device *sun3lance_probe(int unit);
+extern struct net_device *sun3_82586_probe(int unit);
+extern struct net_device *apne_probe(int unit);
+extern struct net_device *bionet_probe(int unit);
+extern struct net_device *pamsnet_probe(int unit);
+extern struct net_device *cs89x0_probe(int unit);
+extern struct net_device *hplance_probe(int unit);
+extern struct net_device *bagetlance_probe(int unit);
+extern struct net_device *mvme147lance_probe(int unit);
+extern struct net_device *tc515_probe(int unit);
+extern struct net_device *lance_probe(int unit);
+extern struct net_device *mace_probe(int unit);
+extern struct net_device *macsonic_probe(int unit);
+extern struct net_device *mac8390_probe(int unit);
+extern struct net_device *mac89x0_probe(int unit);
+extern struct net_device *mc32_probe(int unit);
+extern struct net_device *cops_probe(int unit);
+extern struct net_device *ltpc_probe(void);
+
+/* Detachable devices ("pocket adaptors") */
+extern struct net_device *de620_probe(int unit);
+
+/* Fibre Channel adapters */
+extern int iph5526_probe(struct net_device *dev);
+
+/* SBNI adapters */
+extern int sbni_probe(int unit);
+
+struct devprobe2 {
+ struct net_device *(*probe)(int unit);
+ int status; /* non-zero if autoprobe has failed */
+};
+
+static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
+{
+ struct net_device *dev;
+ for (; p->probe; p++) {
+ if (autoprobe && p->status)
+ continue;
+ dev = p->probe(unit);
+ if (!IS_ERR(dev))
+ return 0;
+ if (autoprobe)
+ p->status = PTR_ERR(dev);
+ }
+ return -ENODEV;
+}
+
+/*
+ * This is a bit of an artificial separation as there are PCI drivers
+ * that also probe for EISA cards (in the PCI group) and there are ISA
+ * drivers that probe for EISA cards (in the ISA group). These are the
+ * legacy EISA only driver probes, and also the legacy PCI probes
+ */
+
+static struct devprobe2 eisa_probes[] __initdata = {
+#ifdef CONFIG_ULTRA32
+ {ultra32_probe, 0},
+#endif
+#ifdef CONFIG_AC3200
+ {ac3200_probe, 0},
+#endif
+#ifdef CONFIG_ES3210
+ {es_probe, 0},
+#endif
+#ifdef CONFIG_LNE390
+ {lne390_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+static struct devprobe2 mca_probes[] __initdata = {
+#ifdef CONFIG_NE2_MCA
+ {ne2_probe, 0},
+#endif
+#ifdef CONFIG_ELMC /* 3c523 */
+ {elmc_probe, 0},
+#endif
+#ifdef CONFIG_ELMC_II /* 3c527 */
+ {mc32_probe, 0},
+#endif
+#ifdef CONFIG_SKMC /* SKnet Microchannel */
+ {skmca_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+/*
+ * ISA probes that touch addresses < 0x400 (including those that also
+ * look for EISA/PCI/MCA cards in addition to ISA cards).
+ */
+static struct devprobe2 isa_probes[] __initdata = {
+#ifdef CONFIG_HP100 /* ISA, EISA & PCI */
+ {hp100_probe, 0},
+#endif
+#ifdef CONFIG_3C515
+ {tc515_probe, 0},
+#endif
+#ifdef CONFIG_ULTRA
+ {ultra_probe, 0},
+#endif
+#ifdef CONFIG_WD80x3
+ {wd_probe, 0},
+#endif
+#ifdef CONFIG_EL2 /* 3c503 */
+ {el2_probe, 0},
+#endif
+#ifdef CONFIG_HPLAN
+ {hp_probe, 0},
+#endif
+#ifdef CONFIG_HPLAN_PLUS
+ {hp_plus_probe, 0},
+#endif
+#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
+ {e2100_probe, 0},
+#endif
+#if defined(CONFIG_NE2000) || \
+ defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
+ {ne_probe, 0},
+#endif
+#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
+ {lance_probe, 0},
+#endif
+#ifdef CONFIG_SMC9194
+ {smc_init, 0},
+#endif
+#ifdef CONFIG_SEEQ8005
+ {seeq8005_probe, 0},
+#endif
+#ifdef CONFIG_CS89x0
+ {cs89x0_probe, 0},
+#endif
+#ifdef CONFIG_AT1700
+ {at1700_probe, 0},
+#endif
+#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */
+ {fmv18x_probe, 0},
+#endif
+#ifdef CONFIG_ETH16I
+ {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
+#endif
+#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */
+ {express_probe, 0},
+#endif
+#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
+ {eepro_probe, 0},
+#endif
+#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
+ {ewrk3_probe, 0},
+#endif
+#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */
+ {i82596_probe, 0},
+#endif
+#ifdef CONFIG_EL1 /* 3c501 */
+ {el1_probe, 0},
+#endif
+#ifdef CONFIG_WAVELAN /* WaveLAN */
+ {wavelan_probe, 0},
+#endif
+#ifdef CONFIG_ARLAN /* Aironet */
+ {arlan_probe, 0},
+#endif
+#ifdef CONFIG_EL16 /* 3c507 */
+ {el16_probe, 0},
+#endif
+#ifdef CONFIG_ELPLUS /* 3c505 */
+ {elplus_probe, 0},
+#endif
+#ifdef CONFIG_SK_G16
+ {SK_init, 0},
+#endif
+#ifdef CONFIG_NI5010
+ {ni5010_probe, 0},
+#endif
+#ifdef CONFIG_NI52
+ {ni52_probe, 0},
+#endif
+#ifdef CONFIG_NI65
+ {ni65_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+static struct devprobe2 parport_probes[] __initdata = {
+#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */
+ {de620_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+static struct devprobe2 m68k_probes[] __initdata = {
+#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
+ {atarilance_probe, 0},
+#endif
+#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
+ {sun3lance_probe, 0},
+#endif
+#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
+ {sun3_82586_probe, 0},
+#endif
+#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
+ {apne_probe, 0},
+#endif
+#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
+ {bionet_probe, 0},
+#endif
+#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
+ {pamsnet_probe, 0},
+#endif
+#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
+ {mvme147lance_probe, 0},
+#endif
+#ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */
+ {mace_probe, 0},
+#endif
+#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */
+ {macsonic_probe, 0},
+#endif
+#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
+ {mac8390_probe, 0},
+#endif
+#ifdef CONFIG_MAC89x0
+ {mac89x0_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+/*
+ * Unified ethernet device probe, segmented per architecture and
+ * per bus interface. This drives the legacy devices only for now.
+ */
+
+static void __init ethif_probe2(int unit)
+{
+ unsigned long base_addr = netdev_boot_base("eth", unit);
+
+ if (base_addr == 1)
+ return;
+
+ (void)( probe_list2(unit, m68k_probes, base_addr == 0) &&
+ probe_list2(unit, eisa_probes, base_addr == 0) &&
+ probe_list2(unit, mca_probes, base_addr == 0) &&
+ probe_list2(unit, isa_probes, base_addr == 0) &&
+ probe_list2(unit, parport_probes, base_addr == 0));
+}
+
+#ifdef CONFIG_TR
+/* Token-ring device probe */
+extern int ibmtr_probe_card(struct net_device *);
+extern struct net_device *sk_isa_probe(int unit);
+extern struct net_device *proteon_probe(int unit);
+extern struct net_device *smctr_probe(int unit);
+
+static struct devprobe2 tr_probes2[] __initdata = {
+#ifdef CONFIG_SKISA
+ {sk_isa_probe, 0},
+#endif
+#ifdef CONFIG_PROTEON
+ {proteon_probe, 0},
+#endif
+#ifdef CONFIG_SMCTR
+ {smctr_probe, 0},
+#endif
+ {NULL, 0},
+};
+
+static __init int trif_probe(int unit)
+{
+ int err = -ENODEV;
+#ifdef CONFIG_IBMTR
+ struct net_device *dev = alloc_trdev(0);
+ if (!dev)
+ return -ENOMEM;
+
+ sprintf(dev->name, "tr%d", unit);
+ netdev_boot_setup_check(dev);
+ err = ibmtr_probe_card(dev);
+ if (err)
+ free_netdev(dev);
+#endif
+ return err;
+}
+
+static void __init trif_probe2(int unit)
+{
+ unsigned long base_addr = netdev_boot_base("tr", unit);
+
+ if (base_addr == 1)
+ return;
+ probe_list2(unit, tr_probes2, base_addr == 0);
+}
+#endif
+
+
+/*
+ * The loopback device is global so it can be directly referenced
+ * by the network code. Also, it must be first on device list.
+ */
+extern int loopback_init(void);
+
+/* Statically configured drivers -- order matters here. */
+static int __init net_olddevs_init(void)
+{
+ int num;
+
+ if (loopback_init()) {
+ printk(KERN_ERR "Network loopback device setup failed\n");
+ }
+
+
+#ifdef CONFIG_SBNI
+ for (num = 0; num < 8; ++num)
+ sbni_probe(num);
+#endif
+#ifdef CONFIG_TR
+ for (num = 0; num < 8; ++num)
+ if (!trif_probe(num))
+ trif_probe2(num);
+#endif
+ for (num = 0; num < 8; ++num)
+ ethif_probe2(num);
+
+#ifdef CONFIG_COPS
+ cops_probe(0);
+ cops_probe(1);
+ cops_probe(2);
+#endif
+#ifdef CONFIG_LTPC
+ ltpc_probe();
+#endif
+
+ return 0;
+}
+
+device_initcall(net_olddevs_init);