Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c
new file mode 100644
index 0000000..15400e7
--- /dev/null
+++ b/drivers/block/paride/fit3.c
@@ -0,0 +1,211 @@
+/*
+ fit3.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ fit3.c is a low-level protocol driver for newer models
+ of the Fidelity International Technology parallel port adapter.
+ This adapter is used in their TransDisk 3000 portable
+ hard-drives, as well as CD-ROM, PD-CD and other devices.
+
+ The TD-2000 and certain older devices use a different protocol.
+ Try the fit2 protocol module with them.
+
+ NB: The FIT adapters do not appear to support the control
+ registers. So, we map ALT_STATUS to STATUS and NO-OP writes
+ to the device control register - this means that IDE reset
+ will not work on these devices.
+
+*/
+
+#define FIT3_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
+
+#define w7(byte) {out_p(7,byte);}
+#define r7() (in_p(7) & 0xff)
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+
+*/
+
+static void fit3_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ if (cont == 1) return;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+ w0(val); w2(0xd);
+ w0(0); w2(0xc);
+ break;
+
+ case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+ w4(val); w4(0);
+ w2(0xc);
+ break;
+
+ }
+}
+
+static int fit3_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b;
+
+ if (cont) {
+ if (regr != 6) return 0xff;
+ regr = 7;
+ }
+
+ switch (pi->mode) {
+
+ case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
+ w2(0xd); a = r1();
+ w2(0xf); b = r1();
+ w2(0xc);
+ return j44(a,b);
+
+ case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+ w2(0xec); w2(0xee); w2(0xef); a = r0();
+ w2(0xc);
+ return a;
+
+ case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+ w2(0xec);
+ a = r4(); b = r4();
+ w2(0xc);
+ return a;
+
+ }
+ return -1;
+
+}
+
+static void fit3_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b, c, d;
+
+ switch (pi->mode) {
+
+ case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
+ for (k=0;k<count/2;k++) {
+ w2(0xd); a = r1();
+ w2(0xf); b = r1();
+ w2(0xc); c = r1();
+ w2(0xe); d = r1();
+ buf[2*k ] = j44(a,b);
+ buf[2*k+1] = j44(c,d);
+ }
+ w2(0xc);
+ break;
+
+ case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+ w2(0xec); w2(0xee);
+ for (k=0;k<count/2;k++) {
+ w2(0xef); a = r0();
+ w2(0xee); b = r0();
+ buf[2*k ] = a;
+ buf[2*k+1] = b;
+ }
+ w2(0xec);
+ w2(0xc);
+ break;
+
+ case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+ w2(0xec);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(0xc);
+ break;
+
+ }
+}
+
+static void fit3_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
+ for (k=0;k<count/2;k++) {
+ w0(buf[2*k ]); w2(0xd);
+ w0(buf[2*k+1]); w2(0xc);
+ }
+ break;
+
+ case 2: w2(0xc); w0(0); w2(0x8); w2(0xc);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(0xc);
+ break;
+ }
+}
+
+static void fit3_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xc); w0(0); w2(0xa);
+ if (pi->mode == 2) {
+ w2(0xc); w0(0x9); w2(0x8); w2(0xc);
+ }
+}
+
+static void fit3_disconnect ( PIA *pi )
+
+{ w2(0xc); w0(0xa); w2(0x8); w2(0xc);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
+
+ printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
+ "mode %d (%s), delay %d\n",
+ pi->device,FIT3_VERSION,pi->port,
+ pi->mode,mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol fit3 = {
+ .owner = THIS_MODULE,
+ .name = "fit3",
+ .max_mode = 3,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = fit3_write_regr,
+ .read_regr = fit3_read_regr,
+ .write_block = fit3_write_block,
+ .read_block = fit3_read_block,
+ .connect = fit3_connect,
+ .disconnect = fit3_disconnect,
+ .log_adapter = fit3_log_adapter,
+};
+
+static int __init fit3_init(void)
+{
+ return pi_register(&fit3)-1;
+}
+
+static void __exit fit3_exit(void)
+{
+ pi_unregister(&fit3);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit3_init)
+module_exit(fit3_exit)