[POWERPC] 86xx: Add aliases node to 8641hpcn DTS file.
The addition of the aliases node is needed for U-Boot
and, eventually, cuImage, to help locate the proper
nodes reliably when using the libfdt approach.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index abb26dc..b039f21 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -16,6 +16,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -107,7 +118,7 @@
};
};
- ethernet@24000 {
+ enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
@@ -127,7 +138,7 @@
phy-connection-type = "rgmii-id";
};
- ethernet@25000 {
+ enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
@@ -147,7 +158,7 @@
phy-connection-type = "rgmii-id";
};
- ethernet@26000 {
+ enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
@@ -167,7 +178,7 @@
phy-connection-type = "rgmii-id";
};
- ethernet@27000 {
+ enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
@@ -186,7 +197,8 @@
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
- serial@4500 {
+
+ serial0: serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
@@ -195,7 +207,7 @@
interrupt-parent = <&mpic>;
};
- serial@4600 {
+ serial1: serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
@@ -222,7 +234,7 @@
};
};
- pcie@f8008000 {
+ pci0: pcie@f8008000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -430,7 +442,7 @@
};
- pcie@f8009000 {
+ pci1: pcie@f8009000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;