Merge mulgrave-w:git/linux-2.6
Conflicts:
include/linux/blkdev.h
Trivial merge to incorporate tag prototypes.
diff --git a/Documentation/scsi/ChangeLog.arcmsr b/Documentation/scsi/ChangeLog.arcmsr
new file mode 100644
index 0000000..162c47f
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.arcmsr
@@ -0,0 +1,56 @@
+**************************************************************************
+** History
+**
+** REV# DATE NAME DESCRIPTION
+** 1.00.00.00 3/31/2004 Erich Chen First release
+** 1.10.00.04 7/28/2004 Erich Chen modify for ioctl
+** 1.10.00.06 8/28/2004 Erich Chen modify for 2.6.x
+** 1.10.00.08 9/28/2004 Erich Chen modify for x86_64
+** 1.10.00.10 10/10/2004 Erich Chen bug fix for SMP & ioctl
+** 1.20.00.00 11/29/2004 Erich Chen bug fix with arcmsr_bus_reset when PHY error
+** 1.20.00.02 12/09/2004 Erich Chen bug fix with over 2T bytes RAID Volume
+** 1.20.00.04 1/09/2005 Erich Chen fits for Debian linux kernel version 2.2.xx
+** 1.20.00.05 2/20/2005 Erich Chen cleanly as look like a Linux driver at 2.6.x
+** thanks for peoples kindness comment
+** Kornel Wieliczek
+** Christoph Hellwig
+** Adrian Bunk
+** Andrew Morton
+** Christoph Hellwig
+** James Bottomley
+** Arjan van de Ven
+** 1.20.00.06 3/12/2005 Erich Chen fix with arcmsr_pci_unmap_dma "unsigned long" cast,
+** modify PCCB POOL allocated by "dma_alloc_coherent"
+** (Kornel Wieliczek's comment)
+** 1.20.00.07 3/23/2005 Erich Chen bug fix with arcmsr_scsi_host_template_init
+** occur segmentation fault,
+** if RAID adapter does not on PCI slot
+** and modprobe/rmmod this driver twice.
+** bug fix enormous stack usage (Adrian Bunk's comment)
+** 1.20.00.08 6/23/2005 Erich Chen bug fix with abort command,
+** in case of heavy loading when sata cable
+** working on low quality connection
+** 1.20.00.09 9/12/2005 Erich Chen bug fix with abort command handling, firmware version check
+** and firmware update notify for hardware bug fix
+** 1.20.00.10 9/23/2005 Erich Chen enhance sysfs function for change driver's max tag Q number.
+** add DMA_64BIT_MASK for backward compatible with all 2.6.x
+** add some useful message for abort command
+** add ioctl code 'ARCMSR_IOCTL_FLUSH_ADAPTER_CACHE'
+** customer can send this command for sync raid volume data
+** 1.20.00.11 9/29/2005 Erich Chen by comment of Arjan van de Ven fix incorrect msleep redefine
+** cast off sizeof(dma_addr_t) condition for 64bit pci_set_dma_mask
+** 1.20.00.12 9/30/2005 Erich Chen bug fix with 64bit platform's ccbs using if over 4G system memory
+** change 64bit pci_set_consistent_dma_mask into 32bit
+** increcct adapter count if adapter initialize fail.
+** miss edit at arcmsr_build_ccb....
+** psge += sizeof(struct _SG64ENTRY *) =>
+** psge += sizeof(struct _SG64ENTRY)
+** 64 bits sg entry would be incorrectly calculated
+** thanks Kornel Wieliczek give me kindly notify
+** and detail description
+** 1.20.00.13 11/15/2005 Erich Chen scheduling pending ccb with FIFO
+** change the architecture of arcmsr command queue list
+** for linux standard list
+** enable usage of pci message signal interrupt
+** follow Randy.Danlup kindness suggestion cleanup this code
+**************************************************************************
\ No newline at end of file
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index be55670..ee03678 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -11,38 +11,43 @@
Supported Cards/Chipsets
-------------------------
PCI ID (pci.ids) OEM Product
- 9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk)
- 9005:0285:9005:028e Adaptec 2020SA (Skyhawk)
- 9005:0285:9005:028b Adaptec 2025ZCR (Terminator)
- 9005:0285:9005:028f Adaptec 2025SA (Terminator)
- 9005:0285:9005:0286 Adaptec 2120S (Crusader)
- 9005:0286:9005:028d Adaptec 2130S (Lancer)
- 9005:0285:9005:0285 Adaptec 2200S (Vulcan)
- 9005:0285:9005:0287 Adaptec 2200S (Vulcan-2m)
- 9005:0286:9005:028c Adaptec 2230S (Lancer)
- 9005:0286:9005:028c Adaptec 2230SLP (Lancer)
- 9005:0285:9005:0296 Adaptec 2240S (SabreExpress)
- 9005:0285:9005:0290 Adaptec 2410SA (Jaguar)
- 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16)
- 9005:0285:103c:3227 Adaptec 2610SA (Bearcat HP release)
- 9005:0285:9005:0292 Adaptec 2810SA (Corsair-8)
- 9005:0285:9005:0294 Adaptec Prowler
- 9005:0286:9005:029d Adaptec 2420SA (Intruder HP release)
- 9005:0286:9005:029c Adaptec 2620SA (Intruder)
- 9005:0286:9005:029b Adaptec 2820SA (Intruder)
- 9005:0286:9005:02a7 Adaptec 2830SA (Skyray)
- 9005:0286:9005:02a8 Adaptec 2430SA (Skyray)
- 9005:0285:9005:0288 Adaptec 3230S (Harrier)
- 9005:0285:9005:0289 Adaptec 3240S (Tornado)
- 9005:0285:9005:0298 Adaptec 4000SAS (BlackBird)
- 9005:0285:9005:0297 Adaptec 4005SAS (AvonPark)
- 9005:0285:9005:0299 Adaptec 4800SAS (Marauder-X)
- 9005:0285:9005:029a Adaptec 4805SAS (Marauder-E)
- 9005:0286:9005:02a2 Adaptec 3800SAS (Hurricane44)
- 1011:0046:9005:0364 Adaptec 5400S (Mustang)
- 1011:0046:9005:0365 Adaptec 5400S (Mustang)
9005:0283:9005:0283 Adaptec Catapult (3210S with arc firmware)
9005:0284:9005:0284 Adaptec Tomcat (3410S with arc firmware)
+ 9005:0285:9005:0285 Adaptec 2200S (Vulcan)
+ 9005:0285:9005:0286 Adaptec 2120S (Crusader)
+ 9005:0285:9005:0287 Adaptec 2200S (Vulcan-2m)
+ 9005:0285:9005:0288 Adaptec 3230S (Harrier)
+ 9005:0285:9005:0289 Adaptec 3240S (Tornado)
+ 9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk)
+ 9005:0285:9005:028b Adaptec 2025ZCR (Terminator)
+ 9005:0286:9005:028c Adaptec 2230S (Lancer)
+ 9005:0286:9005:028c Adaptec 2230SLP (Lancer)
+ 9005:0286:9005:028d Adaptec 2130S (Lancer)
+ 9005:0285:9005:028e Adaptec 2020SA (Skyhawk)
+ 9005:0285:9005:028f Adaptec 2025SA (Terminator)
+ 9005:0285:9005:0290 Adaptec 2410SA (Jaguar)
+ 9005:0285:103c:3227 Adaptec 2610SA (Bearcat HP release)
+ 9005:0285:9005:0293 Adaptec 21610SA (Corsair-16)
+ 9005:0285:9005:0296 Adaptec 2240S (SabreExpress)
+ 9005:0285:9005:0292 Adaptec 2810SA (Corsair-8)
+ 9005:0285:9005:0294 Adaptec Prowler
+ 9005:0285:9005:0297 Adaptec 4005SAS (AvonPark)
+ 9005:0285:9005:0298 Adaptec 4000SAS (BlackBird)
+ 9005:0285:9005:0299 Adaptec 4800SAS (Marauder-X)
+ 9005:0285:9005:029a Adaptec 4805SAS (Marauder-E)
+ 9005:0286:9005:029b Adaptec 2820SA (Intruder)
+ 9005:0286:9005:029c Adaptec 2620SA (Intruder)
+ 9005:0286:9005:029d Adaptec 2420SA (Intruder HP release)
+ 9005:0286:9005:02a2 Adaptec 3800SAS (Hurricane44)
+ 9005:0286:9005:02a7 Adaptec 3805SAS (Hurricane80)
+ 9005:0286:9005:02a8 Adaptec 3400SAS (Hurricane40)
+ 9005:0286:9005:02ac Adaptec 1800SAS (Typhoon44)
+ 9005:0286:9005:02b3 Adaptec 2400SAS (Hurricane40lm)
+ 9005:0285:9005:02b5 Adaptec ASR5800 (Voodoo44)
+ 9005:0285:9005:02b6 Adaptec ASR5805 (Voodoo80)
+ 9005:0285:9005:02b7 Adaptec ASR5808 (Voodoo08)
+ 1011:0046:9005:0364 Adaptec 5400S (Mustang)
+ 1011:0046:9005:0365 Adaptec 5400S (Mustang)
9005:0287:9005:0800 Adaptec Themisto (Jupiter)
9005:0200:9005:0200 Adaptec Themisto (Jupiter)
9005:0286:9005:0800 Adaptec Callisto (Jupiter)
@@ -64,18 +69,20 @@
9005:0285:9005:0290 IBM ServeRAID 7t (Jaguar)
9005:0285:1014:02F2 IBM ServeRAID 8i (AvonPark)
9005:0285:1014:0312 IBM ServeRAID 8i (AvonParkLite)
- 9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora)
9005:0286:1014:9540 IBM ServeRAID 8k/8k-l4 (AuroraLite)
- 9005:0286:9005:029f ICP ICP9014R0 (Lancer)
+ 9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora)
+ 9005:0286:1014:034d IBM ServeRAID 8s (Hurricane)
9005:0286:9005:029e ICP ICP9024R0 (Lancer)
+ 9005:0286:9005:029f ICP ICP9014R0 (Lancer)
9005:0286:9005:02a0 ICP ICP9047MA (Lancer)
9005:0286:9005:02a1 ICP ICP9087MA (Lancer)
+ 9005:0286:9005:02a3 ICP ICP5445AU (Hurricane44)
9005:0286:9005:02a4 ICP ICP9085LI (Marauder-X)
9005:0286:9005:02a5 ICP ICP5085BR (Marauder-E)
- 9005:0286:9005:02a3 ICP ICP5445AU (Hurricane44)
9005:0286:9005:02a6 ICP ICP9067MA (Intruder-6)
- 9005:0286:9005:02a9 ICP ICP5087AU (Skyray)
- 9005:0286:9005:02aa ICP ICP5047AU (Skyray)
+ 9005:0286:9005:02a9 ICP ICP5085AU (Hurricane80)
+ 9005:0286:9005:02aa ICP ICP5045AU (Hurricane40)
+ 9005:0286:9005:02b4 ICP ICP5045AL (Hurricane40lm)
People
-------------------------
diff --git a/Documentation/scsi/arcmsr_spec.txt b/Documentation/scsi/arcmsr_spec.txt
new file mode 100644
index 0000000..5e00423
--- /dev/null
+++ b/Documentation/scsi/arcmsr_spec.txt
@@ -0,0 +1,574 @@
+*******************************************************************************
+** ARECA FIRMWARE SPEC
+*******************************************************************************
+** Usage of IOP331 adapter
+** (All In/Out is in IOP331's view)
+** 1. Message 0 --> InitThread message and retrun code
+** 2. Doorbell is used for RS-232 emulation
+** inDoorBell : bit0 -- data in ready
+** (DRIVER DATA WRITE OK)
+** bit1 -- data out has been read
+** (DRIVER DATA READ OK)
+** outDooeBell: bit0 -- data out ready
+** (IOP331 DATA WRITE OK)
+** bit1 -- data in has been read
+** (IOP331 DATA READ OK)
+** 3. Index Memory Usage
+** offset 0xf00 : for RS232 out (request buffer)
+** offset 0xe00 : for RS232 in (scratch buffer)
+** offset 0xa00 : for inbound message code message_rwbuffer
+** (driver send to IOP331)
+** offset 0xa00 : for outbound message code message_rwbuffer
+** (IOP331 send to driver)
+** 4. RS-232 emulation
+** Currently 128 byte buffer is used
+** 1st uint32_t : Data length (1--124)
+** Byte 4--127 : Max 124 bytes of data
+** 5. PostQ
+** All SCSI Command must be sent through postQ:
+** (inbound queue port) Request frame must be 32 bytes aligned
+** #bit27--bit31 => flag for post ccb
+** #bit0--bit26 => real address (bit27--bit31) of post arcmsr_cdb
+** bit31 :
+** 0 : 256 bytes frame
+** 1 : 512 bytes frame
+** bit30 :
+** 0 : normal request
+** 1 : BIOS request
+** bit29 : reserved
+** bit28 : reserved
+** bit27 : reserved
+** ---------------------------------------------------------------------------
+** (outbount queue port) Request reply
+** #bit27--bit31
+** => flag for reply
+** #bit0--bit26
+** => real address (bit27--bit31) of reply arcmsr_cdb
+** bit31 : must be 0 (for this type of reply)
+** bit30 : reserved for BIOS handshake
+** bit29 : reserved
+** bit28 :
+** 0 : no error, ignore AdapStatus/DevStatus/SenseData
+** 1 : Error, error code in AdapStatus/DevStatus/SenseData
+** bit27 : reserved
+** 6. BIOS request
+** All BIOS request is the same with request from PostQ
+** Except :
+** Request frame is sent from configuration space
+** offset: 0x78 : Request Frame (bit30 == 1)
+** offset: 0x18 : writeonly to generate
+** IRQ to IOP331
+** Completion of request:
+** (bit30 == 0, bit28==err flag)
+** 7. Definition of SGL entry (structure)
+** 8. Message1 Out - Diag Status Code (????)
+** 9. Message0 message code :
+** 0x00 : NOP
+** 0x01 : Get Config
+** ->offset 0xa00 :for outbound message code message_rwbuffer
+** (IOP331 send to driver)
+** Signature 0x87974060(4)
+** Request len 0x00000200(4)
+** numbers of queue 0x00000100(4)
+** SDRAM Size 0x00000100(4)-->256 MB
+** IDE Channels 0x00000008(4)
+** vendor 40 bytes char
+** model 8 bytes char
+** FirmVer 16 bytes char
+** Device Map 16 bytes char
+** FirmwareVersion DWORD <== Added for checking of
+** new firmware capability
+** 0x02 : Set Config
+** ->offset 0xa00 :for inbound message code message_rwbuffer
+** (driver send to IOP331)
+** Signature 0x87974063(4)
+** UPPER32 of Request Frame (4)-->Driver Only
+** 0x03 : Reset (Abort all queued Command)
+** 0x04 : Stop Background Activity
+** 0x05 : Flush Cache
+** 0x06 : Start Background Activity
+** (re-start if background is halted)
+** 0x07 : Check If Host Command Pending
+** (Novell May Need This Function)
+** 0x08 : Set controller time
+** ->offset 0xa00 : for inbound message code message_rwbuffer
+** (driver to IOP331)
+** byte 0 : 0xaa <-- signature
+** byte 1 : 0x55 <-- signature
+** byte 2 : year (04)
+** byte 3 : month (1..12)
+** byte 4 : date (1..31)
+** byte 5 : hour (0..23)
+** byte 6 : minute (0..59)
+** byte 7 : second (0..59)
+*******************************************************************************
+*******************************************************************************
+** RS-232 Interface for Areca Raid Controller
+** The low level command interface is exclusive with VT100 terminal
+** --------------------------------------------------------------------
+** 1. Sequence of command execution
+** --------------------------------------------------------------------
+** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
+** (B) Command block : variable length of data including length,
+** command code, data and checksum byte
+** (C) Return data : variable length of data
+** --------------------------------------------------------------------
+** 2. Command block
+** --------------------------------------------------------------------
+** (A) 1st byte : command block length (low byte)
+** (B) 2nd byte : command block length (high byte)
+** note ..command block length shouldn't > 2040 bytes,
+** length excludes these two bytes
+** (C) 3rd byte : command code
+** (D) 4th and following bytes : variable length data bytes
+** depends on command code
+** (E) last byte : checksum byte (sum of 1st byte until last data byte)
+** --------------------------------------------------------------------
+** 3. Command code and associated data
+** --------------------------------------------------------------------
+** The following are command code defined in raid controller Command
+** code 0x10--0x1? are used for system level management,
+** no password checking is needed and should be implemented in separate
+** well controlled utility and not for end user access.
+** Command code 0x20--0x?? always check the password,
+** password must be entered to enable these command.
+** enum
+** {
+** GUI_SET_SERIAL=0x10,
+** GUI_SET_VENDOR,
+** GUI_SET_MODEL,
+** GUI_IDENTIFY,
+** GUI_CHECK_PASSWORD,
+** GUI_LOGOUT,
+** GUI_HTTP,
+** GUI_SET_ETHERNET_ADDR,
+** GUI_SET_LOGO,
+** GUI_POLL_EVENT,
+** GUI_GET_EVENT,
+** GUI_GET_HW_MONITOR,
+** // GUI_QUICK_CREATE=0x20, (function removed)
+** GUI_GET_INFO_R=0x20,
+** GUI_GET_INFO_V,
+** GUI_GET_INFO_P,
+** GUI_GET_INFO_S,
+** GUI_CLEAR_EVENT,
+** GUI_MUTE_BEEPER=0x30,
+** GUI_BEEPER_SETTING,
+** GUI_SET_PASSWORD,
+** GUI_HOST_INTERFACE_MODE,
+** GUI_REBUILD_PRIORITY,
+** GUI_MAX_ATA_MODE,
+** GUI_RESET_CONTROLLER,
+** GUI_COM_PORT_SETTING,
+** GUI_NO_OPERATION,
+** GUI_DHCP_IP,
+** GUI_CREATE_PASS_THROUGH=0x40,
+** GUI_MODIFY_PASS_THROUGH,
+** GUI_DELETE_PASS_THROUGH,
+** GUI_IDENTIFY_DEVICE,
+** GUI_CREATE_RAIDSET=0x50,
+** GUI_DELETE_RAIDSET,
+** GUI_EXPAND_RAIDSET,
+** GUI_ACTIVATE_RAIDSET,
+** GUI_CREATE_HOT_SPARE,
+** GUI_DELETE_HOT_SPARE,
+** GUI_CREATE_VOLUME=0x60,
+** GUI_MODIFY_VOLUME,
+** GUI_DELETE_VOLUME,
+** GUI_START_CHECK_VOLUME,
+** GUI_STOP_CHECK_VOLUME
+** };
+** Command description :
+** GUI_SET_SERIAL : Set the controller serial#
+** byte 0,1 : length
+** byte 2 : command code 0x10
+** byte 3 : password length (should be 0x0f)
+** byte 4-0x13 : should be "ArEcATecHnoLogY"
+** byte 0x14--0x23 : Serial number string (must be 16 bytes)
+** GUI_SET_VENDOR : Set vendor string for the controller
+** byte 0,1 : length
+** byte 2 : command code 0x11
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x3B : vendor string (must be 40 bytes)
+** GUI_SET_MODEL : Set the model name of the controller
+** byte 0,1 : length
+** byte 2 : command code 0x12
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x1B : model string (must be 8 bytes)
+** GUI_IDENTIFY : Identify device
+** byte 0,1 : length
+** byte 2 : command code 0x13
+** return "Areca RAID Subsystem "
+** GUI_CHECK_PASSWORD : Verify password
+** byte 0,1 : length
+** byte 2 : command code 0x14
+** byte 3 : password length
+** byte 4-0x?? : user password to be checked
+** GUI_LOGOUT : Logout GUI (force password checking on next command)
+** byte 0,1 : length
+** byte 2 : command code 0x15
+** GUI_HTTP : HTTP interface (reserved for Http proxy service)(0x16)
+**
+** GUI_SET_ETHERNET_ADDR : Set the ethernet MAC address
+** byte 0,1 : length
+** byte 2 : command code 0x17
+** byte 3 : password length (should be 0x08)
+** byte 4-0x13 : should be "ArEcAvAr"
+** byte 0x14--0x19 : Ethernet MAC address (must be 6 bytes)
+** GUI_SET_LOGO : Set logo in HTTP
+** byte 0,1 : length
+** byte 2 : command code 0x18
+** byte 3 : Page# (0/1/2/3) (0xff --> clear OEM logo)
+** byte 4/5/6/7 : 0x55/0xaa/0xa5/0x5a
+** byte 8 : TITLE.JPG data (each page must be 2000 bytes)
+** note page0 1st 2 byte must be
+** actual length of the JPG file
+** GUI_POLL_EVENT : Poll If Event Log Changed
+** byte 0,1 : length
+** byte 2 : command code 0x19
+** GUI_GET_EVENT : Read Event
+** byte 0,1 : length
+** byte 2 : command code 0x1a
+** byte 3 : Event Page (0:1st page/1/2/3:last page)
+** GUI_GET_HW_MONITOR : Get HW monitor data
+** byte 0,1 : length
+** byte 2 : command code 0x1b
+** byte 3 : # of FANs(example 2)
+** byte 4 : # of Voltage sensor(example 3)
+** byte 5 : # of temperature sensor(example 2)
+** byte 6 : # of power
+** byte 7/8 : Fan#0 (RPM)
+** byte 9/10 : Fan#1
+** byte 11/12 : Voltage#0 original value in *1000
+** byte 13/14 : Voltage#0 value
+** byte 15/16 : Voltage#1 org
+** byte 17/18 : Voltage#1
+** byte 19/20 : Voltage#2 org
+** byte 21/22 : Voltage#2
+** byte 23 : Temp#0
+** byte 24 : Temp#1
+** byte 25 : Power indicator (bit0 : power#0,
+** bit1 : power#1)
+** byte 26 : UPS indicator
+** GUI_QUICK_CREATE : Quick create raid/volume set
+** byte 0,1 : length
+** byte 2 : command code 0x20
+** byte 3/4/5/6 : raw capacity
+** byte 7 : raid level
+** byte 8 : stripe size
+** byte 9 : spare
+** byte 10/11/12/13: device mask (the devices to create raid/volume)
+** This function is removed, application like
+** to implement quick create function
+** need to use GUI_CREATE_RAIDSET and GUI_CREATE_VOLUMESET function.
+** GUI_GET_INFO_R : Get Raid Set Information
+** byte 0,1 : length
+** byte 2 : command code 0x20
+** byte 3 : raidset#
+** typedef struct sGUI_RAIDSET
+** {
+** BYTE grsRaidSetName[16];
+** DWORD grsCapacity;
+** DWORD grsCapacityX;
+** DWORD grsFailMask;
+** BYTE grsDevArray[32];
+** BYTE grsMemberDevices;
+** BYTE grsNewMemberDevices;
+** BYTE grsRaidState;
+** BYTE grsVolumes;
+** BYTE grsVolumeList[16];
+** BYTE grsRes1;
+** BYTE grsRes2;
+** BYTE grsRes3;
+** BYTE grsFreeSegments;
+** DWORD grsRawStripes[8];
+** DWORD grsRes4;
+** DWORD grsRes5; // Total to 128 bytes
+** DWORD grsRes6; // Total to 128 bytes
+** } sGUI_RAIDSET, *pGUI_RAIDSET;
+** GUI_GET_INFO_V : Get Volume Set Information
+** byte 0,1 : length
+** byte 2 : command code 0x21
+** byte 3 : volumeset#
+** typedef struct sGUI_VOLUMESET
+** {
+** BYTE gvsVolumeName[16]; // 16
+** DWORD gvsCapacity;
+** DWORD gvsCapacityX;
+** DWORD gvsFailMask;
+** DWORD gvsStripeSize;
+** DWORD gvsNewFailMask;
+** DWORD gvsNewStripeSize;
+** DWORD gvsVolumeStatus;
+** DWORD gvsProgress; // 32
+** sSCSI_ATTR gvsScsi;
+** BYTE gvsMemberDisks;
+** BYTE gvsRaidLevel; // 8
+** BYTE gvsNewMemberDisks;
+** BYTE gvsNewRaidLevel;
+** BYTE gvsRaidSetNumber;
+** BYTE gvsRes0; // 4
+** BYTE gvsRes1[4]; // 64 bytes
+** } sGUI_VOLUMESET, *pGUI_VOLUMESET;
+** GUI_GET_INFO_P : Get Physical Drive Information
+** byte 0,1 : length
+** byte 2 : command code 0x22
+** byte 3 : drive # (from 0 to max-channels - 1)
+** typedef struct sGUI_PHY_DRV
+** {
+** BYTE gpdModelName[40];
+** BYTE gpdSerialNumber[20];
+** BYTE gpdFirmRev[8];
+** DWORD gpdCapacity;
+** DWORD gpdCapacityX; // Reserved for expansion
+** BYTE gpdDeviceState;
+** BYTE gpdPioMode;
+** BYTE gpdCurrentUdmaMode;
+** BYTE gpdUdmaMode;
+** BYTE gpdDriveSelect;
+** BYTE gpdRaidNumber; // 0xff if not belongs to a raid set
+** sSCSI_ATTR gpdScsi;
+** BYTE gpdReserved[40]; // Total to 128 bytes
+** } sGUI_PHY_DRV, *pGUI_PHY_DRV;
+** GUI_GET_INFO_S : Get System Information
+** byte 0,1 : length
+** byte 2 : command code 0x23
+** typedef struct sCOM_ATTR
+** {
+** BYTE comBaudRate;
+** BYTE comDataBits;
+** BYTE comStopBits;
+** BYTE comParity;
+** BYTE comFlowControl;
+** } sCOM_ATTR, *pCOM_ATTR;
+** typedef struct sSYSTEM_INFO
+** {
+** BYTE gsiVendorName[40];
+** BYTE gsiSerialNumber[16];
+** BYTE gsiFirmVersion[16];
+** BYTE gsiBootVersion[16];
+** BYTE gsiMbVersion[16];
+** BYTE gsiModelName[8];
+** BYTE gsiLocalIp[4];
+** BYTE gsiCurrentIp[4];
+** DWORD gsiTimeTick;
+** DWORD gsiCpuSpeed;
+** DWORD gsiICache;
+** DWORD gsiDCache;
+** DWORD gsiScache;
+** DWORD gsiMemorySize;
+** DWORD gsiMemorySpeed;
+** DWORD gsiEvents;
+** BYTE gsiMacAddress[6];
+** BYTE gsiDhcp;
+** BYTE gsiBeeper;
+** BYTE gsiChannelUsage;
+** BYTE gsiMaxAtaMode;
+** BYTE gsiSdramEcc; // 1:if ECC enabled
+** BYTE gsiRebuildPriority;
+** sCOM_ATTR gsiComA; // 5 bytes
+** sCOM_ATTR gsiComB; // 5 bytes
+** BYTE gsiIdeChannels;
+** BYTE gsiScsiHostChannels;
+** BYTE gsiIdeHostChannels;
+** BYTE gsiMaxVolumeSet;
+** BYTE gsiMaxRaidSet;
+** BYTE gsiEtherPort; // 1:if ether net port supported
+** BYTE gsiRaid6Engine; // 1:Raid6 engine supported
+** BYTE gsiRes[75];
+** } sSYSTEM_INFO, *pSYSTEM_INFO;
+** GUI_CLEAR_EVENT : Clear System Event
+** byte 0,1 : length
+** byte 2 : command code 0x24
+** GUI_MUTE_BEEPER : Mute current beeper
+** byte 0,1 : length
+** byte 2 : command code 0x30
+** GUI_BEEPER_SETTING : Disable beeper
+** byte 0,1 : length
+** byte 2 : command code 0x31
+** byte 3 : 0->disable, 1->enable
+** GUI_SET_PASSWORD : Change password
+** byte 0,1 : length
+** byte 2 : command code 0x32
+** byte 3 : pass word length ( must <= 15 )
+** byte 4 : password (must be alpha-numerical)
+** GUI_HOST_INTERFACE_MODE : Set host interface mode
+** byte 0,1 : length
+** byte 2 : command code 0x33
+** byte 3 : 0->Independent, 1->cluster
+** GUI_REBUILD_PRIORITY : Set rebuild priority
+** byte 0,1 : length
+** byte 2 : command code 0x34
+** byte 3 : 0/1/2/3 (low->high)
+** GUI_MAX_ATA_MODE : Set maximum ATA mode to be used
+** byte 0,1 : length
+** byte 2 : command code 0x35
+** byte 3 : 0/1/2/3 (133/100/66/33)
+** GUI_RESET_CONTROLLER : Reset Controller
+** byte 0,1 : length
+** byte 2 : command code 0x36
+** *Response with VT100 screen (discard it)
+** GUI_COM_PORT_SETTING : COM port setting
+** byte 0,1 : length
+** byte 2 : command code 0x37
+** byte 3 : 0->COMA (term port),
+** 1->COMB (debug port)
+** byte 4 : 0/1/2/3/4/5/6/7
+** (1200/2400/4800/9600/19200/38400/57600/115200)
+** byte 5 : data bit
+** (0:7 bit, 1:8 bit : must be 8 bit)
+** byte 6 : stop bit (0:1, 1:2 stop bits)
+** byte 7 : parity (0:none, 1:off, 2:even)
+** byte 8 : flow control
+** (0:none, 1:xon/xoff, 2:hardware => must use none)
+** GUI_NO_OPERATION : No operation
+** byte 0,1 : length
+** byte 2 : command code 0x38
+** GUI_DHCP_IP : Set DHCP option and local IP address
+** byte 0,1 : length
+** byte 2 : command code 0x39
+** byte 3 : 0:dhcp disabled, 1:dhcp enabled
+** byte 4/5/6/7 : IP address
+** GUI_CREATE_PASS_THROUGH : Create pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x40
+** byte 3 : device #
+** byte 4 : scsi channel (0/1)
+** byte 5 : scsi id (0-->15)
+** byte 6 : scsi lun (0-->7)
+** byte 7 : tagged queue (1 : enabled)
+** byte 8 : cache mode (1 : enabled)
+** byte 9 : max speed (0/1/2/3/4,
+** async/20/40/80/160 for scsi)
+** (0/1/2/3/4, 33/66/100/133/150 for ide )
+** GUI_MODIFY_PASS_THROUGH : Modify pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x41
+** byte 3 : device #
+** byte 4 : scsi channel (0/1)
+** byte 5 : scsi id (0-->15)
+** byte 6 : scsi lun (0-->7)
+** byte 7 : tagged queue (1 : enabled)
+** byte 8 : cache mode (1 : enabled)
+** byte 9 : max speed (0/1/2/3/4,
+** async/20/40/80/160 for scsi)
+** (0/1/2/3/4, 33/66/100/133/150 for ide )
+** GUI_DELETE_PASS_THROUGH : Delete pass through disk
+** byte 0,1 : length
+** byte 2 : command code 0x42
+** byte 3 : device# to be deleted
+** GUI_IDENTIFY_DEVICE : Identify Device
+** byte 0,1 : length
+** byte 2 : command code 0x43
+** byte 3 : Flash Method
+** (0:flash selected, 1:flash not selected)
+** byte 4/5/6/7 : IDE device mask to be flashed
+** note .... no response data available
+** GUI_CREATE_RAIDSET : Create Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x50
+** byte 3/4/5/6 : device mask
+** byte 7-22 : raidset name (if byte 7 == 0:use default)
+** GUI_DELETE_RAIDSET : Delete Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x51
+** byte 3 : raidset#
+** GUI_EXPAND_RAIDSET : Expand Raid Set
+** byte 0,1 : length
+** byte 2 : command code 0x52
+** byte 3 : raidset#
+** byte 4/5/6/7 : device mask for expansion
+** byte 8/9/10 : (8:0 no change, 1 change, 0xff:terminate,
+** 9:new raid level,
+** 10:new stripe size
+** 0/1/2/3/4/5->4/8/16/32/64/128K )
+** byte 11/12/13 : repeat for each volume in the raidset
+** GUI_ACTIVATE_RAIDSET : Activate incomplete raid set
+** byte 0,1 : length
+** byte 2 : command code 0x53
+** byte 3 : raidset#
+** GUI_CREATE_HOT_SPARE : Create hot spare disk
+** byte 0,1 : length
+** byte 2 : command code 0x54
+** byte 3/4/5/6 : device mask for hot spare creation
+** GUI_DELETE_HOT_SPARE : Delete hot spare disk
+** byte 0,1 : length
+** byte 2 : command code 0x55
+** byte 3/4/5/6 : device mask for hot spare deletion
+** GUI_CREATE_VOLUME : Create volume set
+** byte 0,1 : length
+** byte 2 : command code 0x60
+** byte 3 : raidset#
+** byte 4-19 : volume set name
+** (if byte4 == 0, use default)
+** byte 20-27 : volume capacity (blocks)
+** byte 28 : raid level
+** byte 29 : stripe size
+** (0/1/2/3/4/5->4/8/16/32/64/128K)
+** byte 30 : channel
+** byte 31 : ID
+** byte 32 : LUN
+** byte 33 : 1 enable tag
+** byte 34 : 1 enable cache
+** byte 35 : speed
+** (0/1/2/3/4->async/20/40/80/160 for scsi)
+** (0/1/2/3/4->33/66/100/133/150 for IDE )
+** byte 36 : 1 to select quick init
+**
+** GUI_MODIFY_VOLUME : Modify volume Set
+** byte 0,1 : length
+** byte 2 : command code 0x61
+** byte 3 : volumeset#
+** byte 4-19 : new volume set name
+** (if byte4 == 0, not change)
+** byte 20-27 : new volume capacity (reserved)
+** byte 28 : new raid level
+** byte 29 : new stripe size
+** (0/1/2/3/4/5->4/8/16/32/64/128K)
+** byte 30 : new channel
+** byte 31 : new ID
+** byte 32 : new LUN
+** byte 33 : 1 enable tag
+** byte 34 : 1 enable cache
+** byte 35 : speed
+** (0/1/2/3/4->async/20/40/80/160 for scsi)
+** (0/1/2/3/4->33/66/100/133/150 for IDE )
+** GUI_DELETE_VOLUME : Delete volume set
+** byte 0,1 : length
+** byte 2 : command code 0x62
+** byte 3 : volumeset#
+** GUI_START_CHECK_VOLUME : Start volume consistency check
+** byte 0,1 : length
+** byte 2 : command code 0x63
+** byte 3 : volumeset#
+** GUI_STOP_CHECK_VOLUME : Stop volume consistency check
+** byte 0,1 : length
+** byte 2 : command code 0x64
+** ---------------------------------------------------------------------
+** 4. Returned data
+** ---------------------------------------------------------------------
+** (A) Header : 3 bytes sequence (0x5E, 0x01, 0x61)
+** (B) Length : 2 bytes
+** (low byte 1st, excludes length and checksum byte)
+** (C) status or data :
+** <1> If length == 1 ==> 1 byte status code
+** #define GUI_OK 0x41
+** #define GUI_RAIDSET_NOT_NORMAL 0x42
+** #define GUI_VOLUMESET_NOT_NORMAL 0x43
+** #define GUI_NO_RAIDSET 0x44
+** #define GUI_NO_VOLUMESET 0x45
+** #define GUI_NO_PHYSICAL_DRIVE 0x46
+** #define GUI_PARAMETER_ERROR 0x47
+** #define GUI_UNSUPPORTED_COMMAND 0x48
+** #define GUI_DISK_CONFIG_CHANGED 0x49
+** #define GUI_INVALID_PASSWORD 0x4a
+** #define GUI_NO_DISK_SPACE 0x4b
+** #define GUI_CHECKSUM_ERROR 0x4c
+** #define GUI_PASSWORD_REQUIRED 0x4d
+** <2> If length > 1 ==>
+** data block returned from controller
+** and the contents depends on the command code
+** (E) Checksum : checksum of length and status or data byte
+**************************************************************************
diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt
new file mode 100644
index 0000000..9e2078b
--- /dev/null
+++ b/Documentation/scsi/libsas.txt
@@ -0,0 +1,484 @@
+SAS Layer
+---------
+
+The SAS Layer is a management infrastructure which manages
+SAS LLDDs. It sits between SCSI Core and SAS LLDDs. The
+layout is as follows: while SCSI Core is concerned with
+SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
+phy/OOB/link management, the SAS layer is concerned with:
+
+ * SAS Phy/Port/HA event management (LLDD generates,
+ SAS Layer processes),
+ * SAS Port management (creation/destruction),
+ * SAS Domain discovery and revalidation,
+ * SAS Domain device management,
+ * SCSI Host registration/unregistration,
+ * Device registration with SCSI Core (SAS) or libata
+ (SATA), and
+ * Expander management and exporting expander control
+ to user space.
+
+A SAS LLDD is a PCI device driver. It is concerned with
+phy/OOB management, and vendor specific tasks and generates
+events to the SAS layer.
+
+The SAS Layer does most SAS tasks as outlined in the SAS 1.1
+spec.
+
+The sas_ha_struct describes the SAS LLDD to the SAS layer.
+Most of it is used by the SAS Layer but a few fields need to
+be initialized by the LLDDs.
+
+After initializing your hardware, from the probe() function
+you call sas_register_ha(). It will register your LLDD with
+the SCSI subsystem, creating a SCSI host and it will
+register your SAS driver with the sysfs SAS tree it creates.
+It will then return. Then you enable your phys to actually
+start OOB (at which point your driver will start calling the
+notify_* event callbacks).
+
+Structure descriptions:
+
+struct sas_phy --------------------
+Normally this is statically embedded to your driver's
+phy structure:
+ struct my_phy {
+ blah;
+ struct sas_phy sas_phy;
+ bleh;
+ };
+And then all the phys are an array of my_phy in your HA
+struct (shown below).
+
+Then as you go along and initialize your phys you also
+initialize the sas_phy struct, along with your own
+phy structure.
+
+In general, the phys are managed by the LLDD and the ports
+are managed by the SAS layer. So the phys are initialized
+and updated by the LLDD and the ports are initialized and
+updated by the SAS layer.
+
+There is a scheme where the LLDD can RW certain fields,
+and the SAS layer can only read such ones, and vice versa.
+The idea is to avoid unnecessary locking.
+
+enabled -- must be set (0/1)
+id -- must be set [0,MAX_PHYS)
+class, proto, type, role, oob_mode, linkrate -- must be set
+oob_mode -- you set this when OOB has finished and then notify
+the SAS Layer.
+
+sas_addr -- this normally points to an array holding the sas
+address of the phy, possibly somewhere in your my_phy
+struct.
+
+attached_sas_addr -- set this when you (LLDD) receive an
+IDENTIFY frame or a FIS frame, _before_ notifying the SAS
+layer. The idea is that sometimes the LLDD may want to fake
+or provide a different SAS address on that phy/port and this
+allows it to do this. At best you should copy the sas
+address from the IDENTIFY frame or maybe generate a SAS
+address for SATA directly attached devices. The Discover
+process may later change this.
+
+frame_rcvd -- this is where you copy the IDENTIFY/FIS frame
+when you get it; you lock, copy, set frame_rcvd_size and
+unlock the lock, and then call the event. It is a pointer
+since there's no way to know your hw frame size _exactly_,
+so you define the actual array in your phy struct and let
+this pointer point to it. You copy the frame from your
+DMAable memory to that area holding the lock.
+
+sas_prim -- this is where primitives go when they're
+received. See sas.h. Grab the lock, set the primitive,
+release the lock, notify.
+
+port -- this points to the sas_port if the phy belongs
+to a port -- the LLDD only reads this. It points to the
+sas_port this phy is part of. Set by the SAS Layer.
+
+ha -- may be set; the SAS layer sets it anyway.
+
+lldd_phy -- you should set this to point to your phy so you
+can find your way around faster when the SAS layer calls one
+of your callbacks and passes you a phy. If the sas_phy is
+embedded you can also use container_of -- whatever you
+prefer.
+
+
+struct sas_port --------------------
+The LLDD doesn't set any fields of this struct -- it only
+reads them. They should be self explanatory.
+
+phy_mask is 32 bit, this should be enough for now, as I
+haven't heard of a HA having more than 8 phys.
+
+lldd_port -- I haven't found use for that -- maybe other
+LLDD who wish to have internal port representation can make
+use of this.
+
+
+struct sas_ha_struct --------------------
+It normally is statically declared in your own LLDD
+structure describing your adapter:
+struct my_sas_ha {
+ blah;
+ struct sas_ha_struct sas_ha;
+ struct my_phy phys[MAX_PHYS];
+ struct sas_port sas_ports[MAX_PHYS]; /* (1) */
+ bleh;
+};
+
+(1) If your LLDD doesn't have its own port representation.
+
+What needs to be initialized (sample function given below).
+
+pcidev
+sas_addr -- since the SAS layer doesn't want to mess with
+ memory allocation, etc, this points to statically
+ allocated array somewhere (say in your host adapter
+ structure) and holds the SAS address of the host
+ adapter as given by you or the manufacturer, etc.
+sas_port
+sas_phy -- an array of pointers to structures. (see
+ note above on sas_addr).
+ These must be set. See more notes below.
+num_phys -- the number of phys present in the sas_phy array,
+ and the number of ports present in the sas_port
+ array. There can be a maximum num_phys ports (one per
+ port) so we drop the num_ports, and only use
+ num_phys.
+
+The event interface:
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+When sas_register_ha() returns, those are set and can be
+called by the LLDD to notify the SAS layer of such events
+the SAS layer.
+
+The port notification:
+
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct sas_phy *);
+ void (*lldd_port_deformed)(struct sas_phy *);
+
+If the LLDD wants notification when a port has been formed
+or deformed it sets those to a function satisfying the type.
+
+A SAS LLDD should also implement at least one of the Task
+Management Functions (TMFs) described in SAM:
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+For more information please read SAM from T10.org.
+
+Port and Adapter management:
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+A SAS LLDD should implement at least one of those.
+
+Phy management:
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+lldd_ha -- set this to point to your HA struct. You can also
+use container_of if you embedded it as shown above.
+
+A sample initialization and registration function
+can look like this (called last thing from probe())
+*but* before you enable the phys to do OOB:
+
+static int register_sas_ha(struct my_sas_ha *my_ha)
+{
+ int i;
+ static struct sas_phy *sas_phys[MAX_PHYS];
+ static struct sas_port *sas_ports[MAX_PHYS];
+
+ my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
+
+ for (i = 0; i < MAX_PHYS; i++) {
+ sas_phys[i] = &my_ha->phys[i].sas_phy;
+ sas_ports[i] = &my_ha->sas_ports[i];
+ }
+
+ my_ha->sas_ha.sas_phy = sas_phys;
+ my_ha->sas_ha.sas_port = sas_ports;
+ my_ha->sas_ha.num_phys = MAX_PHYS;
+
+ my_ha->sas_ha.lldd_port_formed = my_port_formed;
+
+ my_ha->sas_ha.lldd_dev_found = my_dev_found;
+ my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
+
+ my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
+
+ my_ha->sas_ha.lldd_queue_size = ha_can_queue;
+ my_ha->sas_ha.lldd_execute_task = my_execute_task;
+
+ my_ha->sas_ha.lldd_abort_task = my_abort_task;
+ my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
+ my_ha->sas_ha.lldd_clear_aca = my_clear_aca;
+ my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
+ my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
+ my_ha->sas_ha.lldd_lu_reset = my_lu_reset;
+ my_ha->sas_ha.lldd_query_task = my_query_task;
+
+ my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
+ my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
+
+ my_ha->sas_ha.lldd_control_phy = my_control_phy;
+
+ return sas_register_ha(&my_ha->sas_ha);
+}
+
+(1) This is normally a LLDD parameter, something of the
+lines of a task collector. What it tells the SAS Layer is
+whether the SAS layer should run in Direct Mode (default:
+value 0 or 1) or Task Collector Mode (value greater than 1).
+
+In Direct Mode, the SAS Layer calls Execute Task as soon as
+it has a command to send to the SDS, _and_ this is a single
+command, i.e. not linked.
+
+Some hardware (e.g. aic94xx) has the capability to DMA more
+than one task at a time (interrupt) from host memory. Task
+Collector Mode is an optional feature for HAs which support
+this in their hardware. (Again, it is completely optional
+even if your hardware supports it.)
+
+In Task Collector Mode, the SAS Layer would do _natural_
+coalescing of tasks and at the appropriate moment it would
+call your driver to DMA more than one task in a single HA
+interrupt. DMBS may want to use this by insmod/modprobe
+setting the lldd_max_execute_num to something greater than
+1.
+
+(2) SAS 1.1 does not define I_T Nexus Reset TMF.
+
+Events
+------
+
+Events are _the only way_ a SAS LLDD notifies the SAS layer
+of anything. There is no other method or way a LLDD to tell
+the SAS layer of anything happening internally or in the SAS
+domain.
+
+Phy events:
+ PHYE_LOSS_OF_SIGNAL, (C)
+ PHYE_OOB_DONE,
+ PHYE_OOB_ERROR, (C)
+ PHYE_SPINUP_HOLD.
+
+Port events, passed on a _phy_:
+ PORTE_BYTES_DMAED, (M)
+ PORTE_BROADCAST_RCVD, (E)
+ PORTE_LINK_RESET_ERR, (C)
+ PORTE_TIMER_EVENT, (C)
+ PORTE_HARD_RESET.
+
+Host Adapter event:
+ HAE_RESET
+
+A SAS LLDD should be able to generate
+ - at least one event from group C (choice),
+ - events marked M (mandatory) are mandatory (only one),
+ - events marked E (expander) if it wants the SAS layer
+ to handle domain revalidation (only one such).
+ - Unmarked events are optional.
+
+Meaning:
+
+HAE_RESET -- when your HA got internal error and was reset.
+
+PORTE_BYTES_DMAED -- on receiving an IDENTIFY/FIS frame
+PORTE_BROADCAST_RCVD -- on receiving a primitive
+PORTE_LINK_RESET_ERR -- timer expired, loss of signal, loss
+of DWS, etc. (*)
+PORTE_TIMER_EVENT -- DWS reset timeout timer expired (*)
+PORTE_HARD_RESET -- Hard Reset primitive received.
+
+PHYE_LOSS_OF_SIGNAL -- the device is gone (*)
+PHYE_OOB_DONE -- OOB went fine and oob_mode is valid
+PHYE_OOB_ERROR -- Error while doing OOB, the device probably
+got disconnected. (*)
+PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent.
+
+(*) should set/clear the appropriate fields in the phy,
+ or alternatively call the inlined sas_phy_disconnected()
+ which is just a helper, from their tasklet.
+
+The Execute Command SCSI RPC:
+
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ unsigned long gfp_flags);
+
+Used to queue a task to the SAS LLDD. @task is the tasks to
+be executed. @num should be the number of tasks being
+queued at this function call (they are linked listed via
+task::list), @gfp_mask should be the gfp_mask defining the
+context of the caller.
+
+This function should implement the Execute Command SCSI RPC,
+or if you're sending a SCSI Task as linked commands, you
+should also use this function.
+
+That is, when lldd_execute_task() is called, the command(s)
+go out on the transport *immediately*. There is *no*
+queuing of any sort and at any level in a SAS LLDD.
+
+The use of task::list is two-fold, one for linked commands,
+the other discussed below.
+
+It is possible to queue up more than one task at a time, by
+initializing the list element of struct sas_task, and
+passing the number of tasks enlisted in this manner in num.
+
+Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
+ 0, the task(s) were queued.
+
+If you want to pass num > 1, then either
+A) you're the only caller of this function and keep track
+ of what you've queued to the LLDD, or
+B) you know what you're doing and have a strategy of
+ retrying.
+
+As opposed to queuing one task at a time (function call),
+batch queuing of tasks, by having num > 1, greatly
+simplifies LLDD code, sequencer code, and _hardware design_,
+and has some performance advantages in certain situations
+(DBMS).
+
+The LLDD advertises if it can take more than one command at
+a time at lldd_execute_task(), by setting the
+lldd_max_execute_num parameter (controlled by "collector"
+module parameter in aic94xx SAS LLDD).
+
+You should leave this to the default 1, unless you know what
+you're doing.
+
+This is a function of the LLDD, to which the SAS layer can
+cater to.
+
+int lldd_queue_size
+ The host adapter's queue size. This is the maximum
+number of commands the lldd can have pending to domain
+devices on behalf of all upper layers submitting through
+lldd_execute_task().
+
+You really want to set this to something (much) larger than
+1.
+
+This _really_ has absolutely nothing to do with queuing.
+There is no queuing in SAS LLDDs.
+
+struct sas_task {
+ dev -- the device this task is destined to
+ list -- must be initialized (INIT_LIST_HEAD)
+ task_proto -- _one_ of enum sas_proto
+ scatter -- pointer to scatter gather list array
+ num_scatter -- number of elements in scatter
+ total_xfer_len -- total number of bytes expected to be transfered
+ data_dir -- PCI_DMA_...
+ task_done -- callback when the task has finished execution
+};
+
+When an external entity, entity other than the LLDD or the
+SAS Layer, wants to work with a struct domain_device, it
+_must_ call kobject_get() when getting a handle on the
+device and kobject_put() when it is done with the device.
+
+This does two things:
+ A) implements proper kfree() for the device;
+ B) increments/decrements the kref for all players:
+ domain_device
+ all domain_device's ... (if past an expander)
+ port
+ host adapter
+ pci device
+ and up the ladder, etc.
+
+DISCOVERY
+---------
+
+The sysfs tree has the following purposes:
+ a) It shows you the physical layout of the SAS domain at
+ the current time, i.e. how the domain looks in the
+ physical world right now.
+ b) Shows some device parameters _at_discovery_time_.
+
+This is a link to the tree(1) program, very useful in
+viewing the SAS domain:
+ftp://mama.indstate.edu/linux/tree/
+I expect user space applications to actually create a
+graphical interface of this.
+
+That is, the sysfs domain tree doesn't show or keep state if
+you e.g., change the meaning of the READY LED MEANING
+setting, but it does show you the current connection status
+of the domain device.
+
+Keeping internal device state changes is responsibility of
+upper layers (Command set drivers) and user space.
+
+When a device or devices are unplugged from the domain, this
+is reflected in the sysfs tree immediately, and the device(s)
+removed from the system.
+
+The structure domain_device describes any device in the SAS
+domain. It is completely managed by the SAS layer. A task
+points to a domain device, this is how the SAS LLDD knows
+where to send the task(s) to. A SAS LLDD only reads the
+contents of the domain_device structure, but it never creates
+or destroys one.
+
+Expander management from User Space
+-----------------------------------
+
+In each expander directory in sysfs, there is a file called
+"smp_portal". It is a binary sysfs attribute file, which
+implements an SMP portal (Note: this is *NOT* an SMP port),
+to which user space applications can send SMP requests and
+receive SMP responses.
+
+Functionality is deceptively simple:
+
+1. Build the SMP frame you want to send. The format and layout
+ is described in the SAS spec. Leave the CRC field equal 0.
+open(2)
+2. Open the expander's SMP portal sysfs file in RW mode.
+write(2)
+3. Write the frame you built in 1.
+read(2)
+4. Read the amount of data you expect to receive for the frame you built.
+ If you receive different amount of data you expected to receive,
+ then there was some kind of error.
+close(2)
+All this process is shown in detail in the function do_smp_func()
+and its callers, in the file "expander_conf.c".
+
+The kernel functionality is implemented in the file
+"sas_expander.c".
+
+The program "expander_conf.c" implements this. It takes one
+argument, the sysfs file name of the SMP portal to the
+expander, and gives expander information, including routing
+tables.
+
+The SMP portal gives you complete control of the expander,
+so please be careful.
diff --git a/MAINTAINERS b/MAINTAINERS
index b08c537..ed9757e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2484,8 +2484,8 @@
S: Supported
S390 ZFCP DRIVER
-P: Andreas Herrmann
-M: aherrman@de.ibm.com
+P: Swen Schillig
+M: swen@vnet.ibm.com
M: linux390@de.ibm.com
L: linux-390@vm.marist.edu
W: http://www.ibm.com/developerworks/linux/linux390/
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index dcbd6ff..9c3a06b 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -848,6 +848,35 @@
EXPORT_SYMBOL(blk_queue_find_tag);
/**
+ * __blk_free_tags - release a given set of tag maintenance info
+ * @bqt: the tag map to free
+ *
+ * Tries to free the specified @bqt@. Returns true if it was
+ * actually freed and false if there are still references using it
+ */
+static int __blk_free_tags(struct blk_queue_tag *bqt)
+{
+ int retval;
+
+ retval = atomic_dec_and_test(&bqt->refcnt);
+ if (retval) {
+ BUG_ON(bqt->busy);
+ BUG_ON(!list_empty(&bqt->busy_list));
+
+ kfree(bqt->tag_index);
+ bqt->tag_index = NULL;
+
+ kfree(bqt->tag_map);
+ bqt->tag_map = NULL;
+
+ kfree(bqt);
+
+ }
+
+ return retval;
+}
+
+/**
* __blk_queue_free_tags - release tag maintenance info
* @q: the request queue for the device
*
@@ -862,23 +891,28 @@
if (!bqt)
return;
- if (atomic_dec_and_test(&bqt->refcnt)) {
- BUG_ON(bqt->busy);
- BUG_ON(!list_empty(&bqt->busy_list));
-
- kfree(bqt->tag_index);
- bqt->tag_index = NULL;
-
- kfree(bqt->tag_map);
- bqt->tag_map = NULL;
-
- kfree(bqt);
- }
+ __blk_free_tags(bqt);
q->queue_tags = NULL;
q->queue_flags &= ~(1 << QUEUE_FLAG_QUEUED);
}
+
+/**
+ * blk_free_tags - release a given set of tag maintenance info
+ * @bqt: the tag map to free
+ *
+ * For externally managed @bqt@ frees the map. Callers of this
+ * function must guarantee to have released all the queues that
+ * might have been using this tag map.
+ */
+void blk_free_tags(struct blk_queue_tag *bqt)
+{
+ if (unlikely(!__blk_free_tags(bqt)))
+ BUG();
+}
+EXPORT_SYMBOL(blk_free_tags);
+
/**
* blk_queue_free_tags - release tag maintenance info
* @q: the request queue for the device
@@ -901,7 +935,7 @@
unsigned long *tag_map;
int nr_ulongs;
- if (depth > q->nr_requests * 2) {
+ if (q && depth > q->nr_requests * 2) {
depth = q->nr_requests * 2;
printk(KERN_ERR "%s: adjusted depth to %d\n",
__FUNCTION__, depth);
@@ -927,6 +961,38 @@
return -ENOMEM;
}
+static struct blk_queue_tag *__blk_queue_init_tags(struct request_queue *q,
+ int depth)
+{
+ struct blk_queue_tag *tags;
+
+ tags = kmalloc(sizeof(struct blk_queue_tag), GFP_ATOMIC);
+ if (!tags)
+ goto fail;
+
+ if (init_tag_map(q, tags, depth))
+ goto fail;
+
+ INIT_LIST_HEAD(&tags->busy_list);
+ tags->busy = 0;
+ atomic_set(&tags->refcnt, 1);
+ return tags;
+fail:
+ kfree(tags);
+ return NULL;
+}
+
+/**
+ * blk_init_tags - initialize the tag info for an external tag map
+ * @depth: the maximum queue depth supported
+ * @tags: the tag to use
+ **/
+struct blk_queue_tag *blk_init_tags(int depth)
+{
+ return __blk_queue_init_tags(NULL, depth);
+}
+EXPORT_SYMBOL(blk_init_tags);
+
/**
* blk_queue_init_tags - initialize the queue tag info
* @q: the request queue for the device
@@ -941,16 +1007,10 @@
BUG_ON(tags && q->queue_tags && tags != q->queue_tags);
if (!tags && !q->queue_tags) {
- tags = kmalloc(sizeof(struct blk_queue_tag), GFP_ATOMIC);
+ tags = __blk_queue_init_tags(q, depth);
+
if (!tags)
goto fail;
-
- if (init_tag_map(q, tags, depth))
- goto fail;
-
- INIT_LIST_HEAD(&tags->busy_list);
- tags->busy = 0;
- atomic_set(&tags->refcnt, 1);
} else if (q->queue_tags) {
if ((rc = blk_queue_resize_tags(q, depth)))
return rc;
@@ -1002,6 +1062,13 @@
}
/*
+ * Currently cannot replace a shared tag map with a new
+ * one, so error out if this is the case
+ */
+ if (atomic_read(&bqt->refcnt) != 1)
+ return -EBUSY;
+
+ /*
* save the old state info, so we can copy it back
*/
tag_index = bqt->tag_index;
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 4cd23c3..a360215 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -7115,7 +7115,7 @@
{
.vendor = PCI_VENDOR_ID_MYLEX,
.device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
- .subvendor = PCI_ANY_ID,
+ .subvendor = PCI_VENDOR_ID_MYLEX,
.subdevice = PCI_ANY_ID,
.driver_data = (unsigned long) &DAC960_GEM_privdata,
},
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index afdff32..05f79d7 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -251,10 +251,6 @@
stk->pool = NULL;
}
-/* scsi_device_types comes from scsi.h */
-#define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \
- "Unknown" : scsi_device_types[n]
-
#if 0
static int xmargin=8;
static int amargin=60;
@@ -389,7 +385,7 @@
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- ctlr, DEVICETYPE(sd->devtype), hostno,
+ ctlr, scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
@@ -407,7 +403,7 @@
ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
ccissscsi[ctlr].ndevices--;
printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(sd.devtype), hostno,
+ ctlr, scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
@@ -458,7 +454,7 @@
if (found == 0) { /* device no longer present. */
changes++;
/* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(csd->devtype), hostno,
+ ctlr, scsi_device_type(csd->devtype), hostno,
csd->bus, csd->target, csd->lun); */
cciss_scsi_remove_entry(ctlr, hostno, i);
/* note, i not incremented */
@@ -468,7 +464,7 @@
printk("cciss%d: device c%db%dt%dl%d type changed "
"(device type now %s).\n",
ctlr, hostno, csd->bus, csd->target, csd->lun,
- DEVICETYPE(csd->devtype));
+ scsi_device_type(csd->devtype));
csd->devtype = sd[j].devtype;
i++; /* so just move along. */
} else /* device is same as it ever was, */
@@ -1098,7 +1094,7 @@
if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk(KERN_INFO "cciss%d: %s ignored, "
"too many devices.\n", cntl_num,
- DEVICETYPE(devtype));
+ scsi_device_type(devtype));
break;
}
memcpy(¤tsd[ncurrent].scsi3addr[0],
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index e9cf1a9..2a14fe2 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -141,18 +141,11 @@
if (sc->sc_data_direction == DMA_TO_DEVICE) {
BUG_ON(ctask->total_length == 0);
- /* bytes to be sent via RDMA operations */
- iser_ctask->rdma_data_count = ctask->total_length -
- ctask->imm_count -
- ctask->unsol_count;
- debug_scsi("cmd [itt %x total %d imm %d unsol_data %d "
- "rdma_data %d]\n",
+ debug_scsi("cmd [itt %x total %d imm %d unsol_data %d\n",
ctask->itt, ctask->total_length, ctask->imm_count,
- ctask->unsol_count, iser_ctask->rdma_data_count);
- } else
- /* bytes to be sent via RDMA operations */
- iser_ctask->rdma_data_count = ctask->total_length;
+ ctask->unsol_count);
+ }
iser_ctask_rdma_init(iser_ctask);
}
@@ -196,13 +189,10 @@
{
struct iscsi_data hdr;
int error = 0;
- struct iscsi_iser_cmd_task *iser_ctask = ctask->dd_data;
/* Send data-out PDUs while there's still unsolicited data to send */
while (ctask->unsol_count > 0) {
- iscsi_prep_unsolicit_data_pdu(ctask, &hdr,
- iser_ctask->rdma_data_count);
-
+ iscsi_prep_unsolicit_data_pdu(ctask, &hdr);
debug_scsi("Sending data-out: itt 0x%x, data count %d\n",
hdr.itt, ctask->data_count);
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index 7e1a411..2cf9ae0 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -262,7 +262,6 @@
struct iscsi_iser_cmd_task {
struct iser_desc desc;
struct iscsi_iser_conn *iser_conn;
- int rdma_data_count;/* RDMA bytes */
enum iser_task_status status;
int command_sent; /* set if command sent */
int dir[ISER_DIRS_NUM]; /* set if dir use*/
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 85696f3..e57bb03 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -162,7 +162,13 @@
.show_starget_port_id = 1,
.set_rport_dev_loss_tmo = mptfc_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
-
+ .show_host_supported_speeds = 1,
+ .show_host_maxframe_size = 1,
+ .show_host_speed = 1,
+ .show_host_fabric_name = 1,
+ .show_host_port_type = 1,
+ .show_host_port_state = 1,
+ .show_host_symbolic_name = 1,
};
static void
@@ -839,33 +845,95 @@
static void
mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
{
- unsigned class = 0, cos = 0;
+ unsigned class = 0;
+ unsigned cos = 0;
+ unsigned speed;
+ unsigned port_type;
+ unsigned port_state;
+ FCPortPage0_t *pp0;
+ struct Scsi_Host *sh;
+ char *sn;
/* don't know what to do as only one scsi (fc) host was allocated */
if (portnum != 0)
return;
- class = ioc->fc_port_page0[portnum].SupportedServiceClass;
+ pp0 = &ioc->fc_port_page0[portnum];
+ sh = ioc->sh;
+
+ sn = fc_host_symbolic_name(sh);
+ snprintf(sn, FC_SYMBOLIC_NAME_SIZE, "%s %s%08xh",
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING,
+ ioc->facts.FWVersion.Word);
+
+ fc_host_tgtid_bind_type(sh) = FC_TGTID_BIND_BY_WWPN;
+
+ fc_host_maxframe_size(sh) = pp0->MaxFrameSize;
+
+ fc_host_node_name(sh) =
+ (u64)pp0->WWNN.High << 32 | (u64)pp0->WWNN.Low;
+
+ fc_host_port_name(sh) =
+ (u64)pp0->WWPN.High << 32 | (u64)pp0->WWPN.Low;
+
+ fc_host_port_id(sh) = pp0->PortIdentifier;
+
+ class = pp0->SupportedServiceClass;
if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_1)
cos |= FC_COS_CLASS1;
if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_2)
cos |= FC_COS_CLASS2;
if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_3)
cos |= FC_COS_CLASS3;
+ fc_host_supported_classes(sh) = cos;
- fc_host_node_name(ioc->sh) =
- (u64)ioc->fc_port_page0[portnum].WWNN.High << 32
- | (u64)ioc->fc_port_page0[portnum].WWNN.Low;
+ if (pp0->CurrentSpeed == MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT)
+ speed = FC_PORTSPEED_1GBIT;
+ else if (pp0->CurrentSpeed == MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT)
+ speed = FC_PORTSPEED_2GBIT;
+ else if (pp0->CurrentSpeed == MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT)
+ speed = FC_PORTSPEED_4GBIT;
+ else if (pp0->CurrentSpeed == MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT)
+ speed = FC_PORTSPEED_10GBIT;
+ else
+ speed = FC_PORTSPEED_UNKNOWN;
+ fc_host_speed(sh) = speed;
- fc_host_port_name(ioc->sh) =
- (u64)ioc->fc_port_page0[portnum].WWPN.High << 32
- | (u64)ioc->fc_port_page0[portnum].WWPN.Low;
+ speed = 0;
+ if (pp0->SupportedSpeeds & MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED)
+ speed |= FC_PORTSPEED_1GBIT;
+ if (pp0->SupportedSpeeds & MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED)
+ speed |= FC_PORTSPEED_2GBIT;
+ if (pp0->SupportedSpeeds & MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED)
+ speed |= FC_PORTSPEED_4GBIT;
+ if (pp0->SupportedSpeeds & MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED)
+ speed |= FC_PORTSPEED_10GBIT;
+ fc_host_supported_speeds(sh) = speed;
- fc_host_port_id(ioc->sh) = ioc->fc_port_page0[portnum].PortIdentifier;
+ port_state = FC_PORTSTATE_UNKNOWN;
+ if (pp0->PortState == MPI_FCPORTPAGE0_PORTSTATE_ONLINE)
+ port_state = FC_PORTSTATE_ONLINE;
+ else if (pp0->PortState == MPI_FCPORTPAGE0_PORTSTATE_OFFLINE)
+ port_state = FC_PORTSTATE_LINKDOWN;
+ fc_host_port_state(sh) = port_state;
- fc_host_supported_classes(ioc->sh) = cos;
+ port_type = FC_PORTTYPE_UNKNOWN;
+ if (pp0->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT)
+ port_type = FC_PORTTYPE_PTP;
+ else if (pp0->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP)
+ port_type = FC_PORTTYPE_LPORT;
+ else if (pp0->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP)
+ port_type = FC_PORTTYPE_NLPORT;
+ else if (pp0->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT)
+ port_type = FC_PORTTYPE_NPORT;
+ fc_host_port_type(sh) = port_type;
- fc_host_tgtid_bind_type(ioc->sh) = FC_TGTID_BIND_BY_WWPN;
+ fc_host_fabric_name(sh) =
+ (pp0->Flags & MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID) ?
+ (u64) pp0->FabricWWNN.High << 32 | (u64) pp0->FabricWWPN.Low :
+ (u64)pp0->WWNN.High << 32 | (u64)pp0->WWNN.Low;
+
}
static void
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f66f220..b752a47 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -852,6 +852,10 @@
dma_addr_t dma_handle;
int error;
+ /* FIXME: only have link errors on local phys */
+ if (!scsi_is_sas_phy_local(phy))
+ return -EINVAL;
+
hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
hdr.ExtPageLength = 0;
hdr.PageNumber = 1 /* page number 1*/;
@@ -924,6 +928,10 @@
unsigned long timeleft;
int error = -ERESTARTSYS;
+ /* FIXME: fusion doesn't allow non-local phy reset */
+ if (!scsi_is_sas_phy_local(phy))
+ return -EINVAL;
+
/* not implemented for expanders */
if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP)
return -ENXIO;
@@ -1570,9 +1578,6 @@
if (!phy_info->phy) {
- if (local)
- phy->local_attached = 1;
-
error = sas_phy_add(phy);
if (error) {
sas_phy_free(phy);
@@ -1642,14 +1647,18 @@
for (i = 0; i < port_info->num_phys; i++)
if (port_info->phy_info[i].identify.sas_address ==
- identify.sas_address)
+ identify.sas_address) {
+ sas_port_mark_backlink(port);
goto out;
+ }
} else if (scsi_is_sas_rphy(parent)) {
struct sas_rphy *parent_rphy = dev_to_rphy(parent);
if (identify.sas_address ==
- parent_rphy->identify.sas_address)
+ parent_rphy->identify.sas_address) {
+ sas_port_mark_backlink(port);
goto out;
+ }
}
switch (identify.device_type) {
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index adc9d8f..5d39b2d 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -189,6 +189,10 @@
struct zfcp_fsf_req *request, *tmp;
unsigned int i;
+ /* 0 is reserved as an invalid req_id */
+ if (req_id == 0)
+ return NULL;
+
i = req_id % REQUEST_LIST_SIZE;
list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list)
@@ -299,11 +303,45 @@
return;
}
+static int calc_alignment(int size)
+{
+ int align = 1;
+
+ if (!size)
+ return 0;
+
+ while ((size - align) > 0)
+ align <<= 1;
+
+ return align;
+}
+
static int __init
zfcp_module_init(void)
{
+ int retval = -ENOMEM;
+ int size, align;
- int retval = 0;
+ size = sizeof(struct zfcp_fsf_req_qtcb);
+ align = calc_alignment(size);
+ zfcp_data.fsf_req_qtcb_cache =
+ kmem_cache_create("zfcp_fsf", size, align, 0, NULL, NULL);
+ if (!zfcp_data.fsf_req_qtcb_cache)
+ goto out;
+
+ size = sizeof(struct fsf_status_read_buffer);
+ align = calc_alignment(size);
+ zfcp_data.sr_buffer_cache =
+ kmem_cache_create("zfcp_sr", size, align, 0, NULL, NULL);
+ if (!zfcp_data.sr_buffer_cache)
+ goto out_sr_cache;
+
+ size = sizeof(struct zfcp_gid_pn_data);
+ align = calc_alignment(size);
+ zfcp_data.gid_pn_cache =
+ kmem_cache_create("zfcp_gid", size, align, 0, NULL, NULL);
+ if (!zfcp_data.gid_pn_cache)
+ goto out_gid_cache;
atomic_set(&zfcp_data.loglevel, loglevel);
@@ -313,15 +351,16 @@
/* initialize adapters to be removed list head */
INIT_LIST_HEAD(&zfcp_data.adapter_remove_lh);
- zfcp_transport_template = fc_attach_transport(&zfcp_transport_functions);
- if (!zfcp_transport_template)
- return -ENODEV;
+ zfcp_data.scsi_transport_template =
+ fc_attach_transport(&zfcp_transport_functions);
+ if (!zfcp_data.scsi_transport_template)
+ goto out_transport;
retval = misc_register(&zfcp_cfdc_misc);
if (retval != 0) {
ZFCP_LOG_INFO("registration of misc device "
"zfcp_cfdc failed\n");
- goto out;
+ goto out_misc;
}
ZFCP_LOG_TRACE("major/minor for zfcp_cfdc: %d/%d\n",
@@ -333,9 +372,6 @@
/* initialise configuration rw lock */
rwlock_init(&zfcp_data.config_lock);
- /* save address of data structure managing the driver module */
- zfcp_data.scsi_host_template.module = THIS_MODULE;
-
/* setup dynamic I/O */
retval = zfcp_ccw_register();
if (retval) {
@@ -350,6 +386,14 @@
out_ccw_register:
misc_deregister(&zfcp_cfdc_misc);
+ out_misc:
+ fc_release_transport(zfcp_data.scsi_transport_template);
+ out_transport:
+ kmem_cache_destroy(zfcp_data.gid_pn_cache);
+ out_gid_cache:
+ kmem_cache_destroy(zfcp_data.sr_buffer_cache);
+ out_sr_cache:
+ kmem_cache_destroy(zfcp_data.fsf_req_qtcb_cache);
out:
return retval;
}
@@ -935,20 +979,20 @@
zfcp_allocate_low_mem_buffers(struct zfcp_adapter *adapter)
{
adapter->pool.fsf_req_erp =
- mempool_create_kmalloc_pool(ZFCP_POOL_FSF_REQ_ERP_NR,
- sizeof(struct zfcp_fsf_req_pool_element));
+ mempool_create_slab_pool(ZFCP_POOL_FSF_REQ_ERP_NR,
+ zfcp_data.fsf_req_qtcb_cache);
if (!adapter->pool.fsf_req_erp)
return -ENOMEM;
adapter->pool.fsf_req_scsi =
- mempool_create_kmalloc_pool(ZFCP_POOL_FSF_REQ_SCSI_NR,
- sizeof(struct zfcp_fsf_req_pool_element));
+ mempool_create_slab_pool(ZFCP_POOL_FSF_REQ_SCSI_NR,
+ zfcp_data.fsf_req_qtcb_cache);
if (!adapter->pool.fsf_req_scsi)
return -ENOMEM;
adapter->pool.fsf_req_abort =
- mempool_create_kmalloc_pool(ZFCP_POOL_FSF_REQ_ABORT_NR,
- sizeof(struct zfcp_fsf_req_pool_element));
+ mempool_create_slab_pool(ZFCP_POOL_FSF_REQ_ABORT_NR,
+ zfcp_data.fsf_req_qtcb_cache);
if (!adapter->pool.fsf_req_abort)
return -ENOMEM;
@@ -959,14 +1003,14 @@
return -ENOMEM;
adapter->pool.data_status_read =
- mempool_create_kmalloc_pool(ZFCP_POOL_STATUS_READ_NR,
- sizeof(struct fsf_status_read_buffer));
+ mempool_create_slab_pool(ZFCP_POOL_STATUS_READ_NR,
+ zfcp_data.sr_buffer_cache);
if (!adapter->pool.data_status_read)
return -ENOMEM;
adapter->pool.data_gid_pn =
- mempool_create_kmalloc_pool(ZFCP_POOL_DATA_GID_PN_NR,
- sizeof(struct zfcp_gid_pn_data));
+ mempool_create_slab_pool(ZFCP_POOL_DATA_GID_PN_NR,
+ zfcp_data.gid_pn_cache);
if (!adapter->pool.data_gid_pn)
return -ENOMEM;
@@ -1091,9 +1135,6 @@
/* initialize lock of associated request queue */
rwlock_init(&adapter->request_queue.queue_lock);
- /* intitialise SCSI ER timer */
- init_timer(&adapter->scsi_er_timer);
-
/* mark adapter unusable as long as sysfs registration is not complete */
atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
@@ -1609,7 +1650,6 @@
gid_pn->ct.handler = zfcp_ns_gid_pn_handler;
gid_pn->ct.handler_data = (unsigned long) gid_pn;
gid_pn->ct.timeout = ZFCP_NS_GID_PN_TIMEOUT;
- gid_pn->ct.timer = &erp_action->timer;
gid_pn->port = erp_action->port;
ret = zfcp_fsf_send_ct(&gid_pn->ct, adapter->pool.fsf_req_erp,
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index fdabade..81680ef 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -275,19 +275,6 @@
}
/**
- * zfcp_ccw_unregister - ccw unregister function
- *
- * Unregisters the driver from common i/o layer. Function will be called at
- * module unload/system shutdown.
- */
-void __exit
-zfcp_ccw_unregister(void)
-{
- zfcp_sysfs_driver_remove_files(&zfcp_ccw_driver.driver);
- ccw_driver_unregister(&zfcp_ccw_driver);
-}
-
-/**
* zfcp_ccw_shutdown - gets called on reboot/shutdown
*
* Makes sure that QDIO queues are down when the system gets stopped.
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index c033145..0aa3b1a 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -707,7 +707,7 @@
struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
struct zfcp_fsf_req *fsf_req,
- struct zfcp_fsf_req *old_fsf_req)
+ unsigned long old_req_id)
{
struct zfcp_scsi_dbf_record *rec = &adapter->scsi_dbf_buf;
struct zfcp_dbf_dump *dump = (struct zfcp_dbf_dump *)rec;
@@ -768,8 +768,7 @@
rec->fsf_seqno = fsf_req->seq_no;
rec->fsf_issued = fsf_req->issued;
}
- rec->type.old_fsf_reqid =
- (unsigned long) old_fsf_req;
+ rec->type.old_fsf_reqid = old_req_id;
} else {
strncpy(dump->tag, "dump", ZFCP_DBF_TAG_SIZE);
dump->total_size = buflen;
@@ -794,17 +793,17 @@
struct zfcp_fsf_req *fsf_req)
{
_zfcp_scsi_dbf_event_common("rslt", tag, level,
- adapter, scsi_cmnd, fsf_req, NULL);
+ adapter, scsi_cmnd, fsf_req, 0);
}
inline void
zfcp_scsi_dbf_event_abort(const char *tag, struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
struct zfcp_fsf_req *new_fsf_req,
- struct zfcp_fsf_req *old_fsf_req)
+ unsigned long old_req_id)
{
_zfcp_scsi_dbf_event_common("abrt", tag, 1,
- adapter, scsi_cmnd, new_fsf_req, old_fsf_req);
+ adapter, scsi_cmnd, new_fsf_req, old_req_id);
}
inline void
@@ -814,7 +813,7 @@
struct zfcp_adapter *adapter = unit->port->adapter;
_zfcp_scsi_dbf_event_common(flag == FCP_TARGET_RESET ? "trst" : "lrst",
- tag, 1, adapter, scsi_cmnd, NULL, NULL);
+ tag, 1, adapter, scsi_cmnd, NULL, 0);
}
static int
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 7c84b3d..8f88269 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -19,7 +19,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef ZFCP_DEF_H
#define ZFCP_DEF_H
@@ -32,6 +31,10 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/mempool.h>
+#include <linux/syscalls.h>
+#include <linux/ioctl.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_cmnd.h>
@@ -39,14 +42,11 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
-#include "zfcp_fsf.h"
#include <asm/ccwdev.h>
#include <asm/qdio.h>
#include <asm/debug.h>
#include <asm/ebcdic.h>
-#include <linux/mempool.h>
-#include <linux/syscalls.h>
-#include <linux/ioctl.h>
+#include "zfcp_fsf.h"
/********************* GENERAL DEFINES *********************************/
@@ -137,7 +137,7 @@
#define ZFCP_EXCHANGE_CONFIG_DATA_RETRIES 7
/* timeout value for "default timer" for fsf requests */
-#define ZFCP_FSF_REQUEST_TIMEOUT (60*HZ);
+#define ZFCP_FSF_REQUEST_TIMEOUT (60*HZ)
/*************** FIBRE CHANNEL PROTOCOL SPECIFIC DEFINES ********************/
@@ -779,7 +779,6 @@
* @handler_data: data passed to handler function
* @pool: pointer to memory pool for ct request structure
* @timeout: FSF timeout for this request
- * @timer: timer (e.g. for request initiated by erp)
* @completion: completion for synchronization purposes
* @status: used to pass error status to calling function
*/
@@ -793,7 +792,6 @@
unsigned long handler_data;
mempool_t *pool;
int timeout;
- struct timer_list *timer;
struct completion *completion;
int status;
};
@@ -821,7 +819,6 @@
* @resp_count: number of elements in response scatter-gather list
* @handler: handler function (called for response to the request)
* @handler_data: data passed to handler function
- * @timer: timer (e.g. for request initiated by erp)
* @completion: completion for synchronization purposes
* @ls_code: hex code of ELS command
* @status: used to pass error status to calling function
@@ -836,7 +833,6 @@
unsigned int resp_count;
zfcp_send_els_handler_t handler;
unsigned long handler_data;
- struct timer_list *timer;
struct completion *completion;
int ls_code;
int status;
@@ -886,7 +882,6 @@
struct list_head port_remove_lh; /* head of ports to be
removed */
u32 ports; /* number of remote ports */
- struct timer_list scsi_er_timer; /* SCSI err recovery watch */
atomic_t reqs_active; /* # active FSF reqs */
unsigned long req_no; /* unique FSF req number */
struct list_head *req_list; /* list of pending reqs */
@@ -1003,6 +998,7 @@
struct fsf_qtcb *qtcb; /* address of associated QTCB */
u32 seq_no; /* Sequence number of request */
unsigned long data; /* private data of request */
+ struct timer_list timer; /* used for erp or scsi er */
struct zfcp_erp_action *erp_action; /* used if this request is
issued on behalf of erp */
mempool_t *pool; /* used if request was alloacted
@@ -1016,6 +1012,7 @@
/* driver data */
struct zfcp_data {
struct scsi_host_template scsi_host_template;
+ struct scsi_transport_template *scsi_transport_template;
atomic_t status; /* Module status flags */
struct list_head adapter_list_head; /* head of adapter list */
struct list_head adapter_remove_lh; /* head of adapters to be
@@ -1031,6 +1028,9 @@
wwn_t init_wwpn;
fcp_lun_t init_fcp_lun;
char *driver_version;
+ kmem_cache_t *fsf_req_qtcb_cache;
+ kmem_cache_t *sr_buffer_cache;
+ kmem_cache_t *gid_pn_cache;
};
/**
@@ -1051,7 +1051,7 @@
#define ZFCP_POOL_DATA_GID_PN_NR 1
/* struct used by memory pools for fsf_requests */
-struct zfcp_fsf_req_pool_element {
+struct zfcp_fsf_req_qtcb {
struct zfcp_fsf_req fsf_req;
struct fsf_qtcb qtcb;
};
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 7f60b6f..862a411 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -64,8 +64,6 @@
static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *, int);
static int zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *);
-static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *);
-static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *);
@@ -93,6 +91,7 @@
static int zfcp_erp_unit_strategy_close(struct zfcp_erp_action *);
static int zfcp_erp_unit_strategy_open(struct zfcp_erp_action *);
+static void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *);
static void zfcp_erp_action_dismiss_port(struct zfcp_port *);
static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *);
static void zfcp_erp_action_dismiss(struct zfcp_erp_action *);
@@ -111,8 +110,62 @@
static inline void zfcp_erp_action_to_running(struct zfcp_erp_action *);
static void zfcp_erp_memwait_handler(unsigned long);
-static void zfcp_erp_timeout_handler(unsigned long);
-static inline void zfcp_erp_timeout_init(struct zfcp_erp_action *);
+
+/**
+ * zfcp_close_qdio - close qdio queues for an adapter
+ */
+static void zfcp_close_qdio(struct zfcp_adapter *adapter)
+{
+ struct zfcp_qdio_queue *req_queue;
+ int first, count;
+
+ if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status))
+ return;
+
+ /* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
+ req_queue = &adapter->request_queue;
+ write_lock_irq(&req_queue->queue_lock);
+ atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
+ write_unlock_irq(&req_queue->queue_lock);
+
+ debug_text_event(adapter->erp_dbf, 3, "qdio_down2a");
+ while (qdio_shutdown(adapter->ccw_device,
+ QDIO_FLAG_CLEANUP_USING_CLEAR) == -EINPROGRESS)
+ msleep(1000);
+ debug_text_event(adapter->erp_dbf, 3, "qdio_down2b");
+
+ /* cleanup used outbound sbals */
+ count = atomic_read(&req_queue->free_count);
+ if (count < QDIO_MAX_BUFFERS_PER_Q) {
+ first = (req_queue->free_index+count) % QDIO_MAX_BUFFERS_PER_Q;
+ count = QDIO_MAX_BUFFERS_PER_Q - count;
+ zfcp_qdio_zero_sbals(req_queue->buffer, first, count);
+ }
+ req_queue->free_index = 0;
+ atomic_set(&req_queue->free_count, 0);
+ req_queue->distance_from_int = 0;
+ adapter->response_queue.free_index = 0;
+ atomic_set(&adapter->response_queue.free_count, 0);
+}
+
+/**
+ * zfcp_close_fsf - stop FSF operations for an adapter
+ *
+ * Dismiss and cleanup all pending fsf_reqs (this wakes up all initiators of
+ * requests waiting for completion; especially this returns SCSI commands
+ * with error state).
+ */
+static void zfcp_close_fsf(struct zfcp_adapter *adapter)
+{
+ /* close queues to ensure that buffers are not accessed by adapter */
+ zfcp_close_qdio(adapter);
+ zfcp_fsf_req_dismiss_all(adapter);
+ /* reset FSF request sequence number */
+ adapter->fsf_req_seq_no = 0;
+ /* all ports and units are closed */
+ zfcp_erp_modify_adapter_status(adapter,
+ ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
+}
/**
* zfcp_fsf_request_timeout_handler - called if a request timed out
@@ -121,52 +174,20 @@
* This function needs to be called if requests (ELS, Generic Service,
* or SCSI commands) exceed a certain time limit. The assumption is
* that after the time limit the adapter get stuck. So we trigger a reopen of
- * the adapter. This should not be used for error recovery, SCSI abort
- * commands and SCSI requests from SCSI mid-layer.
+ * the adapter.
*/
-void
-zfcp_fsf_request_timeout_handler(unsigned long data)
+static void zfcp_fsf_request_timeout_handler(unsigned long data)
{
- struct zfcp_adapter *adapter;
-
- adapter = (struct zfcp_adapter *) data;
-
+ struct zfcp_adapter *adapter = (struct zfcp_adapter *) data;
zfcp_erp_adapter_reopen(adapter, 0);
}
-/**
- * zfcp_fsf_scsi_er_timeout_handler - timeout handler for scsi eh tasks
- *
- * This function needs to be called whenever a SCSI error recovery
- * action (abort/reset) does not return. Re-opening the adapter means
- * that the abort/reset command can be returned by zfcp. It won't complete
- * via the adapter anymore (because qdio queues are closed). If ERP is
- * already running on this adapter it will be stopped.
- */
-void zfcp_fsf_scsi_er_timeout_handler(unsigned long data)
+void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req, unsigned long timeout)
{
- struct zfcp_adapter *adapter = (struct zfcp_adapter *) data;
- unsigned long flags;
-
- ZFCP_LOG_NORMAL("warning: SCSI error recovery timed out. "
- "Restarting all operations on the adapter %s\n",
- zfcp_get_busid_by_adapter(adapter));
- debug_text_event(adapter->erp_dbf, 1, "eh_lmem_tout");
-
- write_lock_irqsave(&adapter->erp_lock, flags);
- if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING,
- &adapter->status)) {
- zfcp_erp_modify_adapter_status(adapter,
- ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN,
- ZFCP_CLEAR);
- zfcp_erp_action_dismiss_adapter(adapter);
- write_unlock_irqrestore(&adapter->erp_lock, flags);
- /* dismiss all pending requests including requests for ERP */
- zfcp_fsf_req_dismiss_all(adapter);
- adapter->fsf_req_seq_no = 0;
- } else
- write_unlock_irqrestore(&adapter->erp_lock, flags);
- zfcp_erp_adapter_reopen(adapter, 0);
+ fsf_req->timer.function = zfcp_fsf_request_timeout_handler;
+ fsf_req->timer.data = (unsigned long) fsf_req->adapter;
+ fsf_req->timer.expires = timeout;
+ add_timer(&fsf_req->timer);
}
/*
@@ -282,7 +303,6 @@
struct zfcp_ls_adisc *adisc;
void *address = NULL;
int retval = 0;
- struct timer_list *timer;
send_els = kzalloc(sizeof(struct zfcp_send_els), GFP_ATOMIC);
if (send_els == NULL)
@@ -329,22 +349,11 @@
(wwn_t) adisc->wwnn, adisc->hard_nport_id,
adisc->nport_id);
- timer = kmalloc(sizeof(struct timer_list), GFP_ATOMIC);
- if (!timer)
- goto nomem;
-
- init_timer(timer);
- timer->function = zfcp_fsf_request_timeout_handler;
- timer->data = (unsigned long) adapter;
- timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
- send_els->timer = timer;
-
retval = zfcp_fsf_send_els(send_els);
if (retval != 0) {
ZFCP_LOG_NORMAL("error: initiation of Send ELS failed for port "
"0x%08x on adapter %s\n", send_els->d_id,
zfcp_get_busid_by_adapter(adapter));
- del_timer(send_els->timer);
goto freemem;
}
@@ -356,7 +365,6 @@
if (address != NULL)
__free_pages(send_els->req->page, 0);
if (send_els != NULL) {
- kfree(send_els->timer);
kfree(send_els->req);
kfree(send_els->resp);
kfree(send_els);
@@ -382,9 +390,6 @@
struct zfcp_ls_adisc_acc *adisc;
send_els = (struct zfcp_send_els *) data;
-
- del_timer(send_els->timer);
-
adapter = send_els->adapter;
port = send_els->port;
d_id = send_els->d_id;
@@ -433,7 +438,6 @@
out:
zfcp_port_put(port);
__free_pages(send_els->req->page, 0);
- kfree(send_els->timer);
kfree(send_els->req);
kfree(send_els->resp);
kfree(send_els);
@@ -909,8 +913,6 @@
debug_text_event(adapter->erp_dbf, 2, "a_asyh_ex");
debug_event(adapter->erp_dbf, 2, &erp_action->action,
sizeof (int));
- if (!(set_mask & ZFCP_STATUS_ERP_TIMEDOUT))
- del_timer(&erp_action->timer);
erp_action->status |= set_mask;
zfcp_erp_action_ready(erp_action);
} else {
@@ -957,8 +959,7 @@
* action gets an appropriate flag and will be processed
* accordingly
*/
-static void
-zfcp_erp_timeout_handler(unsigned long data)
+void zfcp_erp_timeout_handler(unsigned long data)
{
struct zfcp_erp_action *erp_action = (struct zfcp_erp_action *) data;
struct zfcp_adapter *adapter = erp_action->adapter;
@@ -1934,8 +1935,7 @@
&erp_action->adapter->status);
failed_openfcp:
- zfcp_erp_adapter_strategy_close_qdio(erp_action);
- zfcp_erp_adapter_strategy_close_fsf(erp_action);
+ zfcp_close_fsf(erp_action->adapter);
failed_qdio:
out:
return retval;
@@ -2040,59 +2040,6 @@
return retval;
}
-/**
- * zfcp_erp_adapter_strategy_close_qdio - close qdio queues for an adapter
- */
-static void
-zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action)
-{
- int first_used;
- int used_count;
- struct zfcp_adapter *adapter = erp_action->adapter;
-
- if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status)) {
- ZFCP_LOG_DEBUG("error: attempt to shut down inactive QDIO "
- "queues on adapter %s\n",
- zfcp_get_busid_by_adapter(adapter));
- return;
- }
-
- /*
- * Get queue_lock and clear QDIOUP flag. Thus it's guaranteed that
- * do_QDIO won't be called while qdio_shutdown is in progress.
- */
- write_lock_irq(&adapter->request_queue.queue_lock);
- atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
- write_unlock_irq(&adapter->request_queue.queue_lock);
-
- debug_text_event(adapter->erp_dbf, 3, "qdio_down2a");
- while (qdio_shutdown(adapter->ccw_device,
- QDIO_FLAG_CLEANUP_USING_CLEAR) == -EINPROGRESS)
- msleep(1000);
- debug_text_event(adapter->erp_dbf, 3, "qdio_down2b");
-
- /*
- * First we had to stop QDIO operation.
- * Now it is safe to take the following actions.
- */
-
- /* Cleanup only necessary when there are unacknowledged buffers */
- if (atomic_read(&adapter->request_queue.free_count)
- < QDIO_MAX_BUFFERS_PER_Q) {
- first_used = (adapter->request_queue.free_index +
- atomic_read(&adapter->request_queue.free_count))
- % QDIO_MAX_BUFFERS_PER_Q;
- used_count = QDIO_MAX_BUFFERS_PER_Q -
- atomic_read(&adapter->request_queue.free_count);
- zfcp_qdio_zero_sbals(adapter->request_queue.buffer,
- first_used, used_count);
- }
- adapter->response_queue.free_index = 0;
- atomic_set(&adapter->response_queue.free_count, 0);
- adapter->request_queue.free_index = 0;
- atomic_set(&adapter->request_queue.free_count, 0);
- adapter->request_queue.distance_from_int = 0;
-}
static int
zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *erp_action)
@@ -2127,7 +2074,6 @@
write_lock_irq(&adapter->erp_lock);
zfcp_erp_action_to_running(erp_action);
write_unlock_irq(&adapter->erp_lock);
- zfcp_erp_timeout_init(erp_action);
if (zfcp_fsf_exchange_config_data(erp_action)) {
retval = ZFCP_ERP_FAILED;
debug_text_event(adapter->erp_dbf, 5, "a_fstx_xf");
@@ -2196,7 +2142,6 @@
zfcp_erp_action_to_running(erp_action);
write_unlock_irq(&adapter->erp_lock);
- zfcp_erp_timeout_init(erp_action);
ret = zfcp_fsf_exchange_port_data(erp_action, adapter, NULL);
if (ret == -EOPNOTSUPP) {
debug_text_event(adapter->erp_dbf, 3, "a_xport_notsupp");
@@ -2248,27 +2193,6 @@
return retval;
}
-/**
- * zfcp_erp_adapter_strategy_close_fsf - stop FSF operations for an adapter
- */
-static void
-zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action)
-{
- struct zfcp_adapter *adapter = erp_action->adapter;
-
- /*
- * wake waiting initiators of requests,
- * return SCSI commands (with error status),
- * clean up all requests (synchronously)
- */
- zfcp_fsf_req_dismiss_all(adapter);
- /* reset FSF request sequence number */
- adapter->fsf_req_seq_no = 0;
- /* all ports and units are closed */
- zfcp_erp_modify_adapter_status(adapter,
- ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
-}
-
/*
* function:
*
@@ -2605,7 +2529,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_port *port = erp_action->port;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_fsf_close_physical_port(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "o_pfstc_nomem");
@@ -2662,7 +2585,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_port *port = erp_action->port;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_fsf_close_port(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "p_pstc_nomem");
@@ -2700,7 +2622,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_port *port = erp_action->port;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_fsf_open_port(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "p_psto_nomem");
@@ -2738,7 +2659,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_port *port = erp_action->port;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_ns_gid_pn_request(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "p_pstn_nomem");
@@ -2864,7 +2784,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_unit *unit = erp_action->unit;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_fsf_close_unit(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "u_ustc_nomem");
@@ -2905,7 +2824,6 @@
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_unit *unit = erp_action->unit;
- zfcp_erp_timeout_init(erp_action);
retval = zfcp_fsf_open_unit(erp_action);
if (retval == -ENOMEM) {
debug_text_event(adapter->erp_dbf, 5, "u_usto_nomem");
@@ -2930,14 +2848,13 @@
return retval;
}
-static inline void
-zfcp_erp_timeout_init(struct zfcp_erp_action *erp_action)
+void zfcp_erp_start_timer(struct zfcp_fsf_req *fsf_req)
{
- init_timer(&erp_action->timer);
- erp_action->timer.function = zfcp_erp_timeout_handler;
- erp_action->timer.data = (unsigned long) erp_action;
- /* jiffies will be added in zfcp_fsf_req_send */
- erp_action->timer.expires = ZFCP_ERP_FSFREQ_TIMEOUT;
+ BUG_ON(!fsf_req->erp_action);
+ fsf_req->timer.function = zfcp_erp_timeout_handler;
+ fsf_req->timer.data = (unsigned long) fsf_req->erp_action;
+ fsf_req->timer.expires = jiffies + ZFCP_ERP_FSFREQ_TIMEOUT;
+ add_timer(&fsf_req->timer);
}
/*
@@ -3241,7 +3158,7 @@
}
-void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
+static void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
{
struct zfcp_port *port;
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 146d7a2..b8794d7 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -55,7 +55,6 @@
/******************************* S/390 IO ************************************/
extern int zfcp_ccw_register(void);
-extern void zfcp_ccw_unregister(void);
extern void zfcp_qdio_zero_sbals(struct qdio_buffer **, int, int);
extern int zfcp_qdio_allocate(struct zfcp_adapter *);
@@ -88,8 +87,8 @@
struct fsf_qtcb_bottom_port *);
extern int zfcp_fsf_control_file(struct zfcp_adapter *, struct zfcp_fsf_req **,
u32, u32, struct zfcp_sg_list *);
-extern void zfcp_fsf_request_timeout_handler(unsigned long);
-extern void zfcp_fsf_scsi_er_timeout_handler(unsigned long);
+extern void zfcp_fsf_start_timer(struct zfcp_fsf_req *, unsigned long);
+extern void zfcp_erp_start_timer(struct zfcp_fsf_req *);
extern int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *);
extern int zfcp_fsf_status_read(struct zfcp_adapter *, int);
extern int zfcp_fsf_req_create(struct zfcp_adapter *, u32, int, mempool_t *,
@@ -99,8 +98,7 @@
extern int zfcp_fsf_send_els(struct zfcp_send_els *);
extern int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *,
struct zfcp_unit *,
- struct scsi_cmnd *,
- struct timer_list*, int);
+ struct scsi_cmnd *, int, int);
extern int zfcp_fsf_req_complete(struct zfcp_fsf_req *);
extern void zfcp_fsf_incoming_els(struct zfcp_fsf_req *);
extern void zfcp_fsf_req_free(struct zfcp_fsf_req *);
@@ -124,14 +122,11 @@
extern void set_host_byte(u32 *, char);
extern void set_driver_byte(u32 *, char);
extern char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *);
-extern void zfcp_fsf_start_scsi_er_timer(struct zfcp_adapter *);
extern fcp_dl_t zfcp_get_fcp_dl(struct fcp_cmnd_iu *);
extern int zfcp_scsi_command_async(struct zfcp_adapter *,struct zfcp_unit *,
- struct scsi_cmnd *, struct timer_list *);
-extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *,
- struct timer_list *);
-extern struct scsi_transport_template *zfcp_transport_template;
+ struct scsi_cmnd *, int);
+extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *, int);
extern struct fc_function_template zfcp_transport_functions;
/******************************** ERP ****************************************/
@@ -139,7 +134,6 @@
extern int zfcp_erp_adapter_reopen(struct zfcp_adapter *, int);
extern int zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int);
extern void zfcp_erp_adapter_failed(struct zfcp_adapter *);
-extern void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *);
extern void zfcp_erp_modify_port_status(struct zfcp_port *, u32, int);
extern int zfcp_erp_port_reopen(struct zfcp_port *, int);
@@ -187,7 +181,7 @@
struct zfcp_fsf_req *);
extern void zfcp_scsi_dbf_event_abort(const char *, struct zfcp_adapter *,
struct scsi_cmnd *, struct zfcp_fsf_req *,
- struct zfcp_fsf_req *);
+ unsigned long);
extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *,
struct scsi_cmnd *);
extern void zfcp_reqlist_add(struct zfcp_adapter *, struct zfcp_fsf_req *);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index ff2eacf..277826c 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -42,7 +42,7 @@
static inline int zfcp_use_one_sbal(
struct scatterlist *, int, struct scatterlist *, int);
static struct zfcp_fsf_req *zfcp_fsf_req_alloc(mempool_t *, int);
-static int zfcp_fsf_req_send(struct zfcp_fsf_req *, struct timer_list *);
+static int zfcp_fsf_req_send(struct zfcp_fsf_req *);
static int zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *);
static int zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *);
static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *);
@@ -100,14 +100,19 @@
if (req_flags & ZFCP_REQ_NO_QTCB)
size = sizeof(struct zfcp_fsf_req);
else
- size = sizeof(struct zfcp_fsf_req_pool_element);
+ size = sizeof(struct zfcp_fsf_req_qtcb);
- if (likely(pool != NULL))
+ if (likely(pool))
ptr = mempool_alloc(pool, GFP_ATOMIC);
- else
- ptr = kmalloc(size, GFP_ATOMIC);
+ else {
+ if (req_flags & ZFCP_REQ_NO_QTCB)
+ ptr = kmalloc(size, GFP_ATOMIC);
+ else
+ ptr = kmem_cache_alloc(zfcp_data.fsf_req_qtcb_cache,
+ SLAB_ATOMIC);
+ }
- if (unlikely(NULL == ptr))
+ if (unlikely(!ptr))
goto out;
memset(ptr, 0, size);
@@ -115,9 +120,8 @@
if (req_flags & ZFCP_REQ_NO_QTCB) {
fsf_req = (struct zfcp_fsf_req *) ptr;
} else {
- fsf_req = &((struct zfcp_fsf_req_pool_element *) ptr)->fsf_req;
- fsf_req->qtcb =
- &((struct zfcp_fsf_req_pool_element *) ptr)->qtcb;
+ fsf_req = &((struct zfcp_fsf_req_qtcb *) ptr)->fsf_req;
+ fsf_req->qtcb = &((struct zfcp_fsf_req_qtcb *) ptr)->qtcb;
}
fsf_req->pool = pool;
@@ -139,10 +143,17 @@
void
zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req)
{
- if (likely(fsf_req->pool != NULL))
+ if (likely(fsf_req->pool)) {
mempool_free(fsf_req, fsf_req->pool);
- else
- kfree(fsf_req);
+ return;
+ }
+
+ if (fsf_req->qtcb) {
+ kmem_cache_free(zfcp_data.fsf_req_qtcb_cache, fsf_req);
+ return;
+ }
+
+ kfree(fsf_req);
}
/**
@@ -214,8 +225,10 @@
*/
zfcp_fsf_status_read_handler(fsf_req);
goto out;
- } else
+ } else {
+ del_timer(&fsf_req->timer);
zfcp_fsf_protstatus_eval(fsf_req);
+ }
/*
* fsf_req may be deleted due to waking up functions, so
@@ -774,8 +787,7 @@
sbale->addr = (void *) status_buffer;
sbale->length = sizeof(struct fsf_status_read_buffer);
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(fsf_req, NULL);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_DEBUG("error: Could not set-up unsolicited status "
"environment.\n");
@@ -1101,8 +1113,8 @@
struct zfcp_unit *unit, int req_flags)
{
volatile struct qdio_buffer_element *sbale;
- unsigned long lock_flags;
struct zfcp_fsf_req *fsf_req = NULL;
+ unsigned long lock_flags;
int retval = 0;
/* setup new FSF request */
@@ -1132,12 +1144,9 @@
/* set handle of request which should be aborted */
fsf_req->qtcb->bottom.support.req_handle = (u64) old_req_id;
- /* start QDIO request for this FSF request */
-
- zfcp_fsf_start_scsi_er_timer(adapter);
- retval = zfcp_fsf_req_send(fsf_req, NULL);
+ zfcp_fsf_start_timer(fsf_req, ZFCP_SCSI_ER_TIMEOUT);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
- del_timer(&adapter->scsi_er_timer);
ZFCP_LOG_INFO("error: Failed to send abort command request "
"on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
zfcp_get_busid_by_adapter(adapter),
@@ -1173,8 +1182,6 @@
unsigned char status_qual =
new_fsf_req->qtcb->header.fsf_status_qual.word[0];
- del_timer(&new_fsf_req->adapter->scsi_er_timer);
-
if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
/* do not set ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED */
goto skip_fsfstatus;
@@ -1380,11 +1387,6 @@
goto failed_req;
}
- if (erp_action != NULL) {
- erp_action->fsf_req = fsf_req;
- fsf_req->erp_action = erp_action;
- }
-
sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
if (zfcp_use_one_sbal(ct->req, ct->req_count,
ct->resp, ct->resp_count)){
@@ -1451,8 +1453,14 @@
zfcp_san_dbf_event_ct_request(fsf_req);
- /* start QDIO request for this FSF request */
- ret = zfcp_fsf_req_send(fsf_req, ct->timer);
+ if (erp_action) {
+ erp_action->fsf_req = fsf_req;
+ fsf_req->erp_action = erp_action;
+ zfcp_erp_start_timer(fsf_req);
+ } else
+ zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+
+ ret = zfcp_fsf_req_send(fsf_req);
if (ret) {
ZFCP_LOG_DEBUG("error: initiation of CT request failed "
"(adapter %s, port 0x%016Lx)\n",
@@ -1749,8 +1757,8 @@
zfcp_san_dbf_event_els_request(fsf_req);
- /* start QDIO request for this FSF request */
- ret = zfcp_fsf_req_send(fsf_req, els->timer);
+ zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+ ret = zfcp_fsf_req_send(fsf_req);
if (ret) {
ZFCP_LOG_DEBUG("error: initiation of ELS request failed "
"(adapter %s, port d_id: 0x%08x)\n",
@@ -1947,6 +1955,7 @@
zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action)
{
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
unsigned long lock_flags;
int retval = 0;
@@ -1955,7 +1964,7 @@
FSF_QTCB_EXCHANGE_CONFIG_DATA,
ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &(erp_action->fsf_req));
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create exchange configuration "
"data request for adapter %s.\n",
@@ -1963,26 +1972,26 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- erp_action->fsf_req->erp_action = erp_action;
- erp_action->fsf_req->qtcb->bottom.config.feature_selection =
+ fsf_req->qtcb->bottom.config.feature_selection =
FSF_FEATURE_CFDC |
FSF_FEATURE_LUN_SHARING |
FSF_FEATURE_NOTIFICATION_LOST |
FSF_FEATURE_UPDATE_ALERT;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_INFO
("error: Could not send exchange configuration data "
"command on the adapter %s\n",
zfcp_get_busid_by_adapter(erp_action->adapter));
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -2212,10 +2221,9 @@
struct fsf_qtcb_bottom_port *data)
{
volatile struct qdio_buffer_element *sbale;
- int retval = 0;
- unsigned long lock_flags;
struct zfcp_fsf_req *fsf_req;
- struct timer_list *timer;
+ unsigned long lock_flags;
+ int retval = 0;
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) {
ZFCP_LOG_INFO("error: exchange port data "
@@ -2248,22 +2256,11 @@
if (erp_action) {
erp_action->fsf_req = fsf_req;
fsf_req->erp_action = erp_action;
- timer = &erp_action->timer;
- } else {
- timer = kmalloc(sizeof(struct timer_list), GFP_ATOMIC);
- if (!timer) {
- write_unlock_irqrestore(&adapter->request_queue.queue_lock,
- lock_flags);
- zfcp_fsf_req_free(fsf_req);
- return -ENOMEM;
- }
- init_timer(timer);
- timer->function = zfcp_fsf_request_timeout_handler;
- timer->data = (unsigned long) adapter;
- timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
- }
+ zfcp_erp_start_timer(fsf_req);
+ } else
+ zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
- retval = zfcp_fsf_req_send(fsf_req, timer);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send an exchange port data "
"command on the adapter %s\n",
@@ -2271,8 +2268,6 @@
zfcp_fsf_req_free(fsf_req);
if (erp_action)
erp_action->fsf_req = NULL;
- else
- kfree(timer);
write_unlock_irqrestore(&adapter->request_queue.queue_lock,
lock_flags);
return retval;
@@ -2283,9 +2278,7 @@
if (!erp_action) {
wait_event(fsf_req->completion_wq,
fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
- del_timer_sync(timer);
zfcp_fsf_req_free(fsf_req);
- kfree(timer);
}
return retval;
}
@@ -2367,6 +2360,7 @@
zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
{
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
unsigned long lock_flags;
int retval = 0;
@@ -2375,7 +2369,7 @@
FSF_QTCB_OPEN_PORT_WITH_DID,
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &(erp_action->fsf_req));
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create open port request "
"for port 0x%016Lx on adapter %s.\n",
@@ -2384,24 +2378,24 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- erp_action->fsf_req->qtcb->bottom.support.d_id = erp_action->port->d_id;
+ fsf_req->qtcb->bottom.support.d_id = erp_action->port->d_id;
atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->port->status);
- erp_action->fsf_req->data = (unsigned long) erp_action->port;
- erp_action->fsf_req->erp_action = erp_action;
+ fsf_req->data = (unsigned long) erp_action->port;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send open port request for "
"port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -2623,6 +2617,7 @@
zfcp_fsf_close_port(struct zfcp_erp_action *erp_action)
{
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
unsigned long lock_flags;
int retval = 0;
@@ -2631,7 +2626,7 @@
FSF_QTCB_CLOSE_PORT,
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &(erp_action->fsf_req));
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create a close port request "
"for port 0x%016Lx on adapter %s.\n",
@@ -2640,25 +2635,25 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->port->status);
- erp_action->fsf_req->data = (unsigned long) erp_action->port;
- erp_action->fsf_req->erp_action = erp_action;
- erp_action->fsf_req->qtcb->header.port_handle =
- erp_action->port->handle;
+ fsf_req->data = (unsigned long) erp_action->port;
+ fsf_req->erp_action = erp_action;
+ fsf_req->qtcb->header.port_handle = erp_action->port->handle;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send a close port request for "
"port 0x%016Lx on adapter %s.\n",
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -2755,16 +2750,17 @@
int
zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action)
{
- int retval = 0;
- unsigned long lock_flags;
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
+ unsigned long lock_flags;
+ int retval = 0;
/* setup new FSF request */
retval = zfcp_fsf_req_create(erp_action->adapter,
FSF_QTCB_CLOSE_PHYSICAL_PORT,
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &erp_action->fsf_req);
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create close physical port "
"request (adapter %s, port 0x%016Lx)\n",
@@ -2774,8 +2770,7 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
@@ -2783,20 +2778,19 @@
atomic_set_mask(ZFCP_STATUS_PORT_PHYS_CLOSING,
&erp_action->port->status);
/* save a pointer to this port */
- erp_action->fsf_req->data = (unsigned long) erp_action->port;
- /* port to be closed */
- erp_action->fsf_req->qtcb->header.port_handle =
- erp_action->port->handle;
- erp_action->fsf_req->erp_action = erp_action;
+ fsf_req->data = (unsigned long) erp_action->port;
+ fsf_req->qtcb->header.port_handle = erp_action->port->handle;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send close physical port "
"request (adapter %s, port 0x%016Lx)\n",
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn);
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -2961,6 +2955,7 @@
zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action)
{
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
unsigned long lock_flags;
int retval = 0;
@@ -2969,7 +2964,7 @@
FSF_QTCB_OPEN_LUN,
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &(erp_action->fsf_req));
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create open unit request for "
"unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
@@ -2979,24 +2974,22 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- erp_action->fsf_req->qtcb->header.port_handle =
- erp_action->port->handle;
- erp_action->fsf_req->qtcb->bottom.support.fcp_lun =
- erp_action->unit->fcp_lun;
+ fsf_req->qtcb->header.port_handle = erp_action->port->handle;
+ fsf_req->qtcb->bottom.support.fcp_lun = erp_action->unit->fcp_lun;
if (!(erp_action->adapter->connection_features & FSF_FEATURE_NPIV_MODE))
- erp_action->fsf_req->qtcb->bottom.support.option =
+ fsf_req->qtcb->bottom.support.option =
FSF_OPEN_LUN_SUPPRESS_BOXING;
atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status);
- erp_action->fsf_req->data = (unsigned long) erp_action->unit;
- erp_action->fsf_req->erp_action = erp_action;
+ fsf_req->data = (unsigned long) erp_action->unit;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(erp_action->fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send an open unit request "
"on the adapter %s, port 0x%016Lx for "
@@ -3004,7 +2997,7 @@
zfcp_get_busid_by_adapter(erp_action->adapter),
erp_action->port->wwpn,
erp_action->unit->fcp_lun);
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -3297,6 +3290,7 @@
zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action)
{
volatile struct qdio_buffer_element *sbale;
+ struct zfcp_fsf_req *fsf_req;
unsigned long lock_flags;
int retval = 0;
@@ -3305,7 +3299,7 @@
FSF_QTCB_CLOSE_LUN,
ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP,
erp_action->adapter->pool.fsf_req_erp,
- &lock_flags, &(erp_action->fsf_req));
+ &lock_flags, &fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("error: Could not create close unit request for "
"unit 0x%016Lx on port 0x%016Lx on adapter %s.\n",
@@ -3315,27 +3309,26 @@
goto out;
}
- sbale = zfcp_qdio_sbale_req(erp_action->fsf_req,
- erp_action->fsf_req->sbal_curr, 0);
+ sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
sbale[0].flags |= SBAL_FLAGS0_TYPE_READ;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- erp_action->fsf_req->qtcb->header.port_handle =
- erp_action->port->handle;
- erp_action->fsf_req->qtcb->header.lun_handle = erp_action->unit->handle;
+ fsf_req->qtcb->header.port_handle = erp_action->port->handle;
+ fsf_req->qtcb->header.lun_handle = erp_action->unit->handle;
atomic_set_mask(ZFCP_STATUS_COMMON_CLOSING, &erp_action->unit->status);
- erp_action->fsf_req->data = (unsigned long) erp_action->unit;
- erp_action->fsf_req->erp_action = erp_action;
+ fsf_req->data = (unsigned long) erp_action->unit;
+ fsf_req->erp_action = erp_action;
+ erp_action->fsf_req = fsf_req;
- /* start QDIO request for this FSF request */
- retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer);
+ zfcp_erp_start_timer(fsf_req);
+ retval = zfcp_fsf_req_send(erp_action->fsf_req);
if (retval) {
ZFCP_LOG_INFO("error: Could not send a close unit request for "
"unit 0x%016Lx on port 0x%016Lx onadapter %s.\n",
erp_action->unit->fcp_lun,
erp_action->port->wwpn,
zfcp_get_busid_by_adapter(erp_action->adapter));
- zfcp_fsf_req_free(erp_action->fsf_req);
+ zfcp_fsf_req_free(fsf_req);
erp_action->fsf_req = NULL;
goto out;
}
@@ -3488,7 +3481,7 @@
zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter,
struct zfcp_unit *unit,
struct scsi_cmnd * scsi_cmnd,
- struct timer_list *timer, int req_flags)
+ int use_timer, int req_flags)
{
struct zfcp_fsf_req *fsf_req = NULL;
struct fcp_cmnd_iu *fcp_cmnd_iu;
@@ -3516,7 +3509,7 @@
fsf_req->unit = unit;
/* associate FSF request with SCSI request (for look up on abort) */
- scsi_cmnd->host_scribble = (char *) fsf_req;
+ scsi_cmnd->host_scribble = (unsigned char *) fsf_req->req_id;
/* associate SCSI command with FSF request */
fsf_req->data = (unsigned long) scsi_cmnd;
@@ -3629,11 +3622,10 @@
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG,
(char *) scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
- /*
- * start QDIO request for this FSF request
- * covered by an SBALE)
- */
- retval = zfcp_fsf_req_send(fsf_req, timer);
+ if (use_timer)
+ zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+
+ retval = zfcp_fsf_req_send(fsf_req);
if (unlikely(retval < 0)) {
ZFCP_LOG_INFO("error: Could not send FCP command request "
"on adapter %s, port 0x%016Lx, unit 0x%016Lx\n",
@@ -3718,11 +3710,9 @@
fcp_cmnd_iu->fcp_lun = unit->fcp_lun;
fcp_cmnd_iu->task_management_flags = tm_flags;
- /* start QDIO request for this FSF request */
- zfcp_fsf_start_scsi_er_timer(adapter);
- retval = zfcp_fsf_req_send(fsf_req, NULL);
+ zfcp_fsf_start_timer(fsf_req, ZFCP_SCSI_ER_TIMEOUT);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval) {
- del_timer(&adapter->scsi_er_timer);
ZFCP_LOG_INFO("error: Could not send an FCP-command (task "
"management) on adapter %s, port 0x%016Lx for "
"unit LUN 0x%016Lx\n",
@@ -4226,7 +4216,6 @@
char *fcp_rsp_info = zfcp_get_fcp_rsp_info_ptr(fcp_rsp_iu);
struct zfcp_unit *unit = (struct zfcp_unit *) fsf_req->data;
- del_timer(&fsf_req->adapter->scsi_er_timer);
if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) {
fsf_req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED;
goto skip_fsfstatus;
@@ -4295,7 +4284,6 @@
struct zfcp_fsf_req *fsf_req;
struct fsf_qtcb_bottom_support *bottom;
volatile struct qdio_buffer_element *sbale;
- struct timer_list *timer;
unsigned long lock_flags;
int req_flags = 0;
int direction;
@@ -4327,12 +4315,6 @@
goto out;
}
- timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
- if (!timer) {
- retval = -ENOMEM;
- goto out;
- }
-
retval = zfcp_fsf_req_create(adapter, fsf_command, req_flags,
NULL, &lock_flags, &fsf_req);
if (retval < 0) {
@@ -4367,12 +4349,8 @@
} else
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- init_timer(timer);
- timer->function = zfcp_fsf_request_timeout_handler;
- timer->data = (unsigned long) adapter;
- timer->expires = ZFCP_FSF_REQUEST_TIMEOUT;
-
- retval = zfcp_fsf_req_send(fsf_req, timer);
+ zfcp_fsf_start_timer(fsf_req, ZFCP_FSF_REQUEST_TIMEOUT);
+ retval = zfcp_fsf_req_send(fsf_req);
if (retval < 0) {
ZFCP_LOG_INFO("initiation of cfdc up/download failed"
"(adapter %s)\n",
@@ -4392,15 +4370,12 @@
fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
*fsf_req_ptr = fsf_req;
- del_timer_sync(timer);
- goto free_timer;
+ goto out;
free_fsf_req:
zfcp_fsf_req_free(fsf_req);
unlock_queue_lock:
write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags);
- free_timer:
- kfree(timer);
out:
return retval;
}
@@ -4656,7 +4631,6 @@
{
volatile struct qdio_buffer_element *sbale;
struct zfcp_fsf_req *fsf_req = NULL;
- unsigned long flags;
int ret = 0;
struct zfcp_qdio_queue *req_queue = &adapter->request_queue;
@@ -4673,12 +4647,13 @@
fsf_req->fsf_command = fsf_cmd;
INIT_LIST_HEAD(&fsf_req->list);
- /* unique request id */
- spin_lock_irqsave(&adapter->req_list_lock, flags);
+ /* this is serialized (we are holding req_queue-lock of adapter */
+ if (adapter->req_no == 0)
+ adapter->req_no++;
fsf_req->req_id = adapter->req_no++;
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
- zfcp_fsf_req_qtcb_init(fsf_req);
+ init_timer(&fsf_req->timer);
+ zfcp_fsf_req_qtcb_init(fsf_req);
/* initialize waitqueue which may be used to wait on
this request completion */
@@ -4748,8 +4723,7 @@
* returns: 0 - request transfer succesfully started
* !0 - start of request transfer failed
*/
-static int
-zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
+static int zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_adapter *adapter;
struct zfcp_qdio_queue *req_queue;
@@ -4777,12 +4751,6 @@
inc_seq_no = (fsf_req->qtcb != NULL);
- /* figure out expiration time of timeout and start timeout */
- if (unlikely(timer)) {
- timer->expires += jiffies;
- add_timer(timer);
- }
-
ZFCP_LOG_TRACE("request queue of adapter %s: "
"next free SBAL is %i, %i free SBALs\n",
zfcp_get_busid_by_adapter(adapter),
@@ -4819,12 +4787,7 @@
if (unlikely(retval)) {
/* Queues are down..... */
retval = -EIO;
- /*
- * FIXME(potential race):
- * timer might be expired (absolutely unlikely)
- */
- if (timer)
- del_timer(timer);
+ del_timer(&fsf_req->timer);
spin_lock(&adapter->req_list_lock);
zfcp_reqlist_remove(adapter, fsf_req->req_id);
spin_unlock(&adapter->req_list_lock);
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 1bb5508..7cafa34 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -39,11 +39,10 @@
static struct device_attribute *zfcp_sysfs_sdev_attrs[];
-struct scsi_transport_template *zfcp_transport_template;
-
struct zfcp_data zfcp_data = {
.scsi_host_template = {
.name = ZFCP_NAME,
+ .module = THIS_MODULE,
.proc_name = "zfcp",
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
@@ -232,7 +231,7 @@
*/
int
zfcp_scsi_command_async(struct zfcp_adapter *adapter, struct zfcp_unit *unit,
- struct scsi_cmnd *scpnt, struct timer_list *timer)
+ struct scsi_cmnd *scpnt, int use_timer)
{
int tmp;
int retval;
@@ -268,7 +267,7 @@
goto out;
}
- tmp = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, timer,
+ tmp = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, use_timer,
ZFCP_REQ_AUTO_CLEANUP);
if (unlikely(tmp < 0)) {
@@ -292,21 +291,22 @@
* zfcp_scsi_command_sync - send a SCSI command and wait for completion
* @unit: unit where command is sent to
* @scpnt: scsi command to be sent
- * @timer: timer to be started if request is successfully initiated
+ * @use_timer: indicates whether timer should be setup or not
* Return: 0
*
* Errors are indicated in scpnt->result
*/
int
zfcp_scsi_command_sync(struct zfcp_unit *unit, struct scsi_cmnd *scpnt,
- struct timer_list *timer)
+ int use_timer)
{
int ret;
DECLARE_COMPLETION(wait);
scpnt->SCp.ptr = (void *) &wait; /* silent re-use */
scpnt->scsi_done = zfcp_scsi_command_sync_handler;
- ret = zfcp_scsi_command_async(unit->port->adapter, unit, scpnt, timer);
+ ret = zfcp_scsi_command_async(unit->port->adapter, unit, scpnt,
+ use_timer);
if (ret == 0)
wait_for_completion(&wait);
@@ -342,7 +342,7 @@
adapter = (struct zfcp_adapter *) scpnt->device->host->hostdata[0];
unit = (struct zfcp_unit *) scpnt->device->hostdata;
- return zfcp_scsi_command_async(adapter, unit, scpnt, NULL);
+ return zfcp_scsi_command_async(adapter, unit, scpnt, 0);
}
static struct zfcp_unit *
@@ -379,16 +379,15 @@
* will handle late commands. (Usually, the normal completion of late
* commands is ignored with respect to the running abort operation.)
*/
-int
-zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
+int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
{
struct Scsi_Host *scsi_host;
struct zfcp_adapter *adapter;
struct zfcp_unit *unit;
- int retval = SUCCESS;
- struct zfcp_fsf_req *new_fsf_req = NULL;
- struct zfcp_fsf_req *old_fsf_req;
+ struct zfcp_fsf_req *fsf_req;
unsigned long flags;
+ unsigned long old_req_id;
+ int retval = SUCCESS;
scsi_host = scpnt->device->host;
adapter = (struct zfcp_adapter *) scsi_host->hostdata[0];
@@ -400,55 +399,47 @@
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
- /*
- * Check whether command has just completed and can not be aborted.
- * Even if the command has just been completed late, we can access
- * scpnt since the SCSI stack does not release it at least until
- * this routine returns. (scpnt is parameter passed to this routine
- * and must not disappear during abort even on late completion.)
- */
- old_fsf_req = (struct zfcp_fsf_req *) scpnt->host_scribble;
- if (!old_fsf_req) {
+ /* Check whether corresponding fsf_req is still pending */
+ spin_lock(&adapter->req_list_lock);
+ fsf_req = zfcp_reqlist_ismember(adapter, (unsigned long)
+ scpnt->host_scribble);
+ spin_unlock(&adapter->req_list_lock);
+ if (!fsf_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
- zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, NULL);
+ zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, 0);
retval = SUCCESS;
goto out;
}
- old_fsf_req->data = 0;
- old_fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTING;
+ fsf_req->data = 0;
+ fsf_req->status |= ZFCP_STATUS_FSFREQ_ABORTING;
+ old_req_id = fsf_req->req_id;
- /* don't access old_fsf_req after releasing the abort_lock */
+ /* don't access old fsf_req after releasing the abort_lock */
write_unlock_irqrestore(&adapter->abort_lock, flags);
- /* call FSF routine which does the abort */
- new_fsf_req = zfcp_fsf_abort_fcp_command((unsigned long) old_fsf_req,
- adapter, unit, 0);
- if (!new_fsf_req) {
+
+ fsf_req = zfcp_fsf_abort_fcp_command(old_req_id, adapter, unit, 0);
+ if (!fsf_req) {
ZFCP_LOG_INFO("error: initiation of Abort FCP Cmnd failed\n");
zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
- old_fsf_req);
+ old_req_id);
retval = FAILED;
goto out;
}
- /* wait for completion of abort */
- __wait_event(new_fsf_req->completion_wq,
- new_fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
+ __wait_event(fsf_req->completion_wq,
+ fsf_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
- /* status should be valid since signals were not permitted */
- if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED) {
- zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, new_fsf_req,
- NULL);
+ if (fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED) {
+ zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, fsf_req, 0);
retval = SUCCESS;
- } else if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED) {
- zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, new_fsf_req,
- NULL);
+ } else if (fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED) {
+ zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, fsf_req, 0);
retval = SUCCESS;
} else {
- zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, new_fsf_req,
- NULL);
+ zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, fsf_req, 0);
retval = FAILED;
}
- zfcp_fsf_req_free(new_fsf_req);
+ zfcp_fsf_req_free(fsf_req);
out:
return retval;
}
@@ -548,14 +539,11 @@
/**
* zfcp_scsi_eh_host_reset_handler - handler for host and bus reset
- *
- * If ERP is already running it will be stopped.
*/
int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
{
struct zfcp_unit *unit;
struct zfcp_adapter *adapter;
- unsigned long flags;
unit = (struct zfcp_unit*) scpnt->device->hostdata;
adapter = unit->port->adapter;
@@ -563,22 +551,8 @@
ZFCP_LOG_NORMAL("host/bus reset because of problems with "
"unit 0x%016Lx\n", unit->fcp_lun);
- write_lock_irqsave(&adapter->erp_lock, flags);
- if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING,
- &adapter->status)) {
- zfcp_erp_modify_adapter_status(adapter,
- ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN,
- ZFCP_CLEAR);
- zfcp_erp_action_dismiss_adapter(adapter);
- write_unlock_irqrestore(&adapter->erp_lock, flags);
- zfcp_fsf_req_dismiss_all(adapter);
- adapter->fsf_req_seq_no = 0;
- zfcp_erp_adapter_reopen(adapter, 0);
- } else {
- write_unlock_irqrestore(&adapter->erp_lock, flags);
- zfcp_erp_adapter_reopen(adapter, 0);
- zfcp_erp_wait(adapter);
- }
+ zfcp_erp_adapter_reopen(adapter, 0);
+ zfcp_erp_wait(adapter);
return SUCCESS;
}
@@ -607,7 +581,7 @@
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = unique_id++; /* FIXME */
adapter->scsi_host->max_cmd_len = ZFCP_MAX_SCSI_CMND_LENGTH;
- adapter->scsi_host->transportt = zfcp_transport_template;
+ adapter->scsi_host->transportt = zfcp_data.scsi_transport_template;
/*
* save a pointer to our own adapter data structure within
@@ -648,16 +622,6 @@
return;
}
-
-void
-zfcp_fsf_start_scsi_er_timer(struct zfcp_adapter *adapter)
-{
- adapter->scsi_er_timer.function = zfcp_fsf_scsi_er_timeout_handler;
- adapter->scsi_er_timer.data = (unsigned long) adapter;
- adapter->scsi_er_timer.expires = jiffies + ZFCP_SCSI_ER_TIMEOUT;
- add_timer(&adapter->scsi_er_timer);
-}
-
/*
* Support functions for FC transport class
*/
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 16a12a3..4ea49fd 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -662,7 +662,7 @@
particular standard ISA I/O Address need not be probed.
*/
PrimaryProbeInfo->IO_Address = 0;
- while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) {
+ while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) {
struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest;
@@ -762,7 +762,7 @@
PrimaryProbeInfo->Bus = Bus;
PrimaryProbeInfo->Device = Device;
PrimaryProbeInfo->IRQ_Channel = IRQ_Channel;
- PrimaryProbeInfo->PCI_Device = PCI_Device;
+ PrimaryProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
PCIMultiMasterCount++;
} else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
@@ -773,7 +773,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
- ProbeInfo->PCI_Device = PCI_Device;
+ ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
NonPrimaryPCIMultiMasterCount++;
PCIMultiMasterCount++;
} else
@@ -823,7 +823,7 @@
noting the PCI bus location and assigned IRQ Channel.
*/
PCI_Device = NULL;
- while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) {
+ while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) {
unsigned char Bus;
unsigned char Device;
unsigned int IRQ_Channel;
@@ -850,7 +850,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
- ProbeInfo->PCI_Device = PCI_Device;
+ ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
break;
}
}
@@ -874,7 +874,7 @@
/*
Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
*/
- while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) {
+ while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) {
unsigned char Bus;
unsigned char Device;
unsigned int IRQ_Channel;
@@ -923,7 +923,7 @@
ProbeInfo->Bus = Bus;
ProbeInfo->Device = Device;
ProbeInfo->IRQ_Channel = IRQ_Channel;
- ProbeInfo->PCI_Device = PCI_Device;
+ ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
FlashPointCount++;
} else
BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
@@ -1890,6 +1890,7 @@
*/
if (HostAdapter->MailboxSpace)
pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, HostAdapter->MailboxSpace, HostAdapter->MailboxSpaceHandle);
+ pci_dev_put(HostAdapter->PCI_Device);
HostAdapter->MailboxSpace = NULL;
HostAdapter->MailboxSpaceHandle = 0;
HostAdapter->MailboxSize = 0;
@@ -2176,6 +2177,7 @@
{
int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex;
struct BusLogic_HostAdapter *PrototypeHostAdapter;
+ int ret = 0;
#ifdef MODULE
if (BusLogic)
@@ -2282,25 +2284,49 @@
perform Target Device Inquiry.
*/
if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
- BusLogic_ReportHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_CreateInitialCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) {
+ BusLogic_ReportHostAdapterConfiguration(HostAdapter) &&
+ BusLogic_AcquireResources(HostAdapter) &&
+ BusLogic_CreateInitialCCBs(HostAdapter) &&
+ BusLogic_InitializeHostAdapter(HostAdapter) &&
+ BusLogic_TargetDeviceInquiry(HostAdapter)) {
/*
Initialization has been completed successfully. Release and
re-register usage of the I/O Address range so that the Model
Name of the Host Adapter will appear, and initialize the SCSI
Host structure.
*/
- release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
- if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, HostAdapter->FullModelName)) {
- printk(KERN_WARNING "BusLogic: Release and re-register of " "port 0x%04lx failed \n", (unsigned long) HostAdapter->IO_Address);
+ release_region(HostAdapter->IO_Address,
+ HostAdapter->AddressCount);
+ if (!request_region(HostAdapter->IO_Address,
+ HostAdapter->AddressCount,
+ HostAdapter->FullModelName)) {
+ printk(KERN_WARNING
+ "BusLogic: Release and re-register of "
+ "port 0x%04lx failed \n",
+ (unsigned long)HostAdapter->IO_Address);
BusLogic_DestroyCCBs(HostAdapter);
BusLogic_ReleaseResources(HostAdapter);
list_del(&HostAdapter->host_list);
scsi_host_put(Host);
+ ret = -ENOMEM;
} else {
- BusLogic_InitializeHostStructure(HostAdapter, Host);
- scsi_add_host(Host, HostAdapter->PCI_Device ? &HostAdapter->PCI_Device->dev : NULL);
- scsi_scan_host(Host);
- BusLogicHostAdapterCount++;
+ BusLogic_InitializeHostStructure(HostAdapter,
+ Host);
+ if (scsi_add_host(Host, HostAdapter->PCI_Device
+ ? &HostAdapter->PCI_Device->dev
+ : NULL)) {
+ printk(KERN_WARNING
+ "BusLogic: scsi_add_host()"
+ "failed!\n");
+ BusLogic_DestroyCCBs(HostAdapter);
+ BusLogic_ReleaseResources(HostAdapter);
+ list_del(&HostAdapter->host_list);
+ scsi_host_put(Host);
+ ret = -ENODEV;
+ } else {
+ scsi_scan_host(Host);
+ BusLogicHostAdapterCount++;
+ }
}
} else {
/*
@@ -2315,12 +2341,13 @@
BusLogic_ReleaseResources(HostAdapter);
list_del(&HostAdapter->host_list);
scsi_host_put(Host);
+ ret = -ENODEV;
}
}
kfree(PrototypeHostAdapter);
kfree(BusLogic_ProbeInfoList);
BusLogic_ProbeInfoList = NULL;
- return 0;
+ return ret;
}
@@ -2954,6 +2981,7 @@
}
+#if 0
/*
BusLogic_AbortCommand aborts Command if possible.
*/
@@ -3024,6 +3052,7 @@
return SUCCESS;
}
+#endif
/*
BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all
currently executing SCSI Commands as having been Reset.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 96a81cd..a6f920d 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -27,6 +27,11 @@
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
+config SCSI_NETLINK
+ bool
+ default n
+ select NET
+
config SCSI_PROC_FS
bool "legacy /proc/scsi/ support"
depends on SCSI && PROC_FS
@@ -209,7 +214,7 @@
there should be no noticeable performance impact as long as you have
logging turned off.
-menu "SCSI Transport Attributes"
+menu "SCSI Transports"
depends on SCSI
config SCSI_SPI_ATTRS
@@ -222,6 +227,7 @@
config SCSI_FC_ATTRS
tristate "FiberChannel Transport Attributes"
depends on SCSI
+ select SCSI_NETLINK
help
If you wish to export transport-specific information about
each attached FiberChannel device to sysfs, say Y.
@@ -242,6 +248,8 @@
If you wish to export transport-specific information about
each attached SAS device to sysfs, say Y.
+source "drivers/scsi/libsas/Kconfig"
+
endmenu
menu "SCSI low-level drivers"
@@ -431,6 +439,7 @@
module will be called aic7xxx_old.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
+source "drivers/scsi/aic94xx/Kconfig"
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
@@ -469,6 +478,20 @@
To compile this driver as a module, choose M here: the
module will be called in2000.
+config SCSI_ARCMSR
+ tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports all of ARECA's SATA RAID controller cards.
+ This is an ARECA-maintained driver by Erich Chen.
+ If you have any problems, please mail to: < erich@areca.com.tw >
+ Areca supports Linux RAID config tools.
+
+ < http://www.areca.com.tw >
+
+ To compile this driver as a module, choose M here: the
+ module will be called arcmsr (modprobe arcmsr).
+
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
@@ -1053,6 +1076,13 @@
depends on SCSI_LASI700
default y
+config SCSI_STEX
+ tristate "Promise SuperTrak EX Series support"
+ depends on PCI && SCSI
+ ---help---
+ This driver supports Promise SuperTrak EX8350/8300/16350/16300
+ Storage controllers.
+
config SCSI_SYM53C8XX_2
tristate "SYM53C8XX Version 2 SCSI support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index ebd0cf0..8fc2c59 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
@@ -59,6 +60,7 @@
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
+obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
@@ -67,6 +69,7 @@
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
+obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
@@ -138,6 +141,7 @@
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
+obj-$(CONFIG_SCSI_STEX) += stex.o
obj-$(CONFIG_ARM) += arm/
@@ -155,6 +159,7 @@
scsicam.o scsi_error.o scsi_lib.o \
scsi_scan.o scsi_sysfs.o \
scsi_devinfo.o
+scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index fddfa2e..0854069 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -40,7 +40,7 @@
return IRQ_HANDLED;
}
-static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -115,7 +115,7 @@
return 0;
}
-static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
/* disable SCSI interrupts */
@@ -217,7 +217,7 @@
return num_a2091;
}
-static int a2091_bus_reset(Scsi_Cmnd *cmd)
+static int a2091_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
diff --git a/drivers/scsi/a2091.h b/drivers/scsi/a2091.h
index 22d6a13..fe809bc 100644
--- a/drivers/scsi/a2091.h
+++ b/drivers/scsi/a2091.h
@@ -13,10 +13,6 @@
int a2091_detect(struct scsi_host_template *);
int a2091_release(struct Scsi_Host *);
-const char *wd33c93_info(void);
-int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int wd33c93_abort(Scsi_Cmnd *);
-int wd33c93_reset(Scsi_Cmnd *, unsigned int);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index ae9ab4b..7bf46d4 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -44,7 +44,7 @@
return IRQ_NONE;
}
-static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -110,8 +110,8 @@
return 0;
}
-static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
- int status)
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
+ int status)
{
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
@@ -205,7 +205,7 @@
return 0;
}
-static int a3000_bus_reset(Scsi_Cmnd *cmd)
+static int a3000_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h
index 5535a65..44a4ec7 100644
--- a/drivers/scsi/a3000.h
+++ b/drivers/scsi/a3000.h
@@ -13,10 +13,6 @@
int a3000_detect(struct scsi_host_template *);
int a3000_release(struct Scsi_Host *);
-const char *wd33c93_info(void);
-int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int wd33c93_abort(Scsi_Cmnd *);
-int wd33c93_reset(Scsi_Cmnd *, unsigned int);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 83b5c7d0..ac108f9 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -169,13 +169,17 @@
int acbsize = -1;
module_param(acbsize, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
+
+int expose_physicals = 0;
+module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. 0=off, 1=on");
/**
* aac_get_config_status - check the adapter configuration
* @common: adapter to query
*
* Query config status, and commit the configuration if needed.
*/
-int aac_get_config_status(struct aac_dev *dev)
+int aac_get_config_status(struct aac_dev *dev, int commit_flag)
{
int status = 0;
struct fib * fibptr;
@@ -219,7 +223,7 @@
aac_fib_complete(fibptr);
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
if (status >= 0) {
- if (commit == 1) {
+ if ((commit == 1) || commit_flag) {
struct aac_commit_config * dinfo;
aac_fib_init(fibptr);
dinfo = (struct aac_commit_config *) fib_data(fibptr);
@@ -489,6 +493,8 @@
unsigned instance;
fsa_dev_ptr = dev->fsa_dev;
+ if (!fsa_dev_ptr)
+ return -ENOMEM;
instance = dev->scsi_host_ptr->unique_id;
if (!(fibptr = aac_fib_alloc(dev)))
@@ -782,8 +788,9 @@
dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
}
- tmp = le32_to_cpu(dev->adapter_info.kernelrev);
- printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
+ if (!dev->in_reset) {
+ tmp = le32_to_cpu(dev->adapter_info.kernelrev);
+ printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
dev->name,
dev->id,
tmp>>24,
@@ -792,20 +799,21 @@
le32_to_cpu(dev->adapter_info.kernelbuild),
(int)sizeof(dev->supplement_adapter_info.BuildDate),
dev->supplement_adapter_info.BuildDate);
- tmp = le32_to_cpu(dev->adapter_info.monitorrev);
- printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
+ tmp = le32_to_cpu(dev->adapter_info.monitorrev);
+ printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
dev->name, dev->id,
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
le32_to_cpu(dev->adapter_info.monitorbuild));
- tmp = le32_to_cpu(dev->adapter_info.biosrev);
- printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
+ tmp = le32_to_cpu(dev->adapter_info.biosrev);
+ printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
dev->name, dev->id,
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
le32_to_cpu(dev->adapter_info.biosbuild));
- if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
- printk(KERN_INFO "%s%d: serial %x\n",
- dev->name, dev->id,
- le32_to_cpu(dev->adapter_info.serial[0]));
+ if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
+ printk(KERN_INFO "%s%d: serial %x\n",
+ dev->name, dev->id,
+ le32_to_cpu(dev->adapter_info.serial[0]));
+ }
dev->nondasd_support = 0;
dev->raid_scsi_mode = 0;
@@ -1392,6 +1400,7 @@
struct scsi_cmnd *cmd;
struct scsi_device *sdev = scsicmd->device;
int active = 0;
+ struct aac_dev *aac;
unsigned long flags;
/*
@@ -1413,11 +1422,14 @@
if (active)
return SCSI_MLQUEUE_DEVICE_BUSY;
+ aac = (struct aac_dev *)scsicmd->device->host->hostdata;
+ if (aac->in_reset)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
/*
* Allocate and initialize a Fib
*/
- if (!(cmd_fibcontext =
- aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata)))
+ if (!(cmd_fibcontext = aac_fib_alloc(aac)))
return SCSI_MLQUEUE_HOST_BUSY;
aac_fib_init(cmd_fibcontext);
@@ -1470,6 +1482,8 @@
struct aac_dev *dev = (struct aac_dev *)host->hostdata;
struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
+ if (fsa_dev_ptr == NULL)
+ return -1;
/*
* If the bus, id or lun is out of range, return fail
* Test does not apply to ID 16, the pseudo id for the controller
@@ -1499,6 +1513,8 @@
case INQUIRY:
case READ_CAPACITY:
case TEST_UNIT_READY:
+ if (dev->in_reset)
+ return -1;
spin_unlock_irq(host->host_lock);
aac_probe_container(dev, cid);
if ((fsa_dev_ptr[cid].valid & 1) == 0)
@@ -1523,7 +1539,9 @@
return 0;
}
} else { /* check for physical non-dasd devices */
- if(dev->nondasd_support == 1){
+ if ((dev->nondasd_support == 1) || expose_physicals) {
+ if (dev->in_reset)
+ return -1;
return aac_send_srb_fib(scsicmd);
} else {
scsicmd->result = DID_NO_CONNECT << 16;
@@ -1579,6 +1597,8 @@
scsicmd->scsi_done(scsicmd);
return 0;
}
+ if (dev->in_reset)
+ return -1;
setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
@@ -1734,6 +1754,8 @@
case READ_10:
case READ_12:
case READ_16:
+ if (dev->in_reset)
+ return -1;
/*
* Hack to keep track of ordinal number of the device that
* corresponds to a container. Needed to convert
@@ -1752,6 +1774,8 @@
case WRITE_10:
case WRITE_12:
case WRITE_16:
+ if (dev->in_reset)
+ return -1;
return aac_write(scsicmd, cid);
case SYNCHRONIZE_CACHE:
@@ -1782,6 +1806,8 @@
struct fsa_dev_info *fsa_dev_ptr;
fsa_dev_ptr = dev->fsa_dev;
+ if (!fsa_dev_ptr)
+ return -EBUSY;
if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
return -EFAULT;
if (qd.cnum == -1)
@@ -1820,6 +1846,8 @@
struct fsa_dev_info *fsa_dev_ptr;
fsa_dev_ptr = dev->fsa_dev;
+ if (!fsa_dev_ptr)
+ return -EBUSY;
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
return -EFAULT;
@@ -1843,6 +1871,8 @@
struct fsa_dev_info *fsa_dev_ptr;
fsa_dev_ptr = dev->fsa_dev;
+ if (!fsa_dev_ptr)
+ return -EBUSY;
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
return -EFAULT;
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index d0eecd4..eb3ed91 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -494,6 +494,7 @@
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
int (*adapter_send)(struct fib * fib);
+ int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
};
/*
@@ -682,14 +683,6 @@
__le32 Mailbox[8];
};
-#define InboundMailbox0 IndexRegs.Mailbox[0]
-#define InboundMailbox1 IndexRegs.Mailbox[1]
-#define InboundMailbox2 IndexRegs.Mailbox[2]
-#define InboundMailbox3 IndexRegs.Mailbox[3]
-#define InboundMailbox4 IndexRegs.Mailbox[4]
-#define InboundMailbox5 IndexRegs.Mailbox[5]
-#define InboundMailbox6 IndexRegs.Mailbox[6]
-
#define INBOUNDDOORBELL_0 0x00000001
#define INBOUNDDOORBELL_1 0x00000002
#define INBOUNDDOORBELL_2 0x00000004
@@ -1010,6 +1003,8 @@
struct rx_registers __iomem *rx;
struct rkt_registers __iomem *rkt;
} regs;
+ volatile void __iomem *base;
+ volatile struct rx_inbound __iomem *IndexRegs;
u32 OIMR; /* Mask Register Cache */
/*
* AIF thread states
@@ -1029,6 +1024,7 @@
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
u8 raw_io_64;
u8 printf_enabled;
+ u8 in_reset;
};
#define aac_adapter_interrupt(dev) \
@@ -1049,6 +1045,9 @@
#define aac_adapter_send(fib) \
((fib)->dev)->a_ops.adapter_send(fib)
+#define aac_adapter_ioremap(dev, size) \
+ (dev)->a_ops.adapter_ioremap(dev, size)
+
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
/*
@@ -1524,7 +1523,6 @@
__le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */
};
-#define CT_OK 218
struct aac_get_name_resp {
__le32 dummy0;
__le32 dummy1;
@@ -1670,6 +1668,7 @@
#define RCV_TEMP_READINGS 0x00000025
#define GET_COMM_PREFERRED_SETTINGS 0x00000026
#define IOP_RESET 0x00001000
+#define IOP_RESET_ALWAYS 0x00001001
#define RE_INIT_ADAPTER 0x000000ee
/*
@@ -1788,7 +1787,7 @@
int aac_fib_complete(struct fib * context);
#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
struct aac_dev *aac_init_adapter(struct aac_dev *dev);
-int aac_get_config_status(struct aac_dev *dev);
+int aac_get_config_status(struct aac_dev *dev, int commit_flag);
int aac_get_containers(struct aac_dev *dev);
int aac_scsi_cmd(struct scsi_cmnd *cmd);
int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
@@ -1799,6 +1798,7 @@
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
+int aac_check_health(struct aac_dev * dev);
int aac_command_thread(void *data);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 255421d..da1d3a9 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -38,7 +38,7 @@
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
+#include <linux/delay.h> /* ssleep prototype */
#include <linux/kthread.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
@@ -140,7 +140,8 @@
fibptr->hw_fib_pa = hw_fib_pa;
fibptr->hw_fib = hw_fib;
}
- aac_fib_free(fibptr);
+ if (retval != -EINTR)
+ aac_fib_free(fibptr);
return retval;
}
@@ -297,7 +298,7 @@
spin_unlock_irqrestore(&dev->fib_lock, flags);
/* If someone killed the AIF aacraid thread, restart it */
status = !dev->aif_thread;
- if (status && dev->queues && dev->fsa_dev) {
+ if (status && !dev->in_reset && dev->queues && dev->fsa_dev) {
/* Be paranoid, be very paranoid! */
kthread_stop(dev->thread);
ssleep(1);
@@ -621,7 +622,13 @@
actual_fibsize = sizeof (struct aac_srb) + (((user_srbcmd->sg.count & 0xff) - 1) * sizeof (struct sgentry));
if(actual_fibsize != fibsize){ // User made a mistake - should not continue
- dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n"));
+ dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
+ "Raw SRB command calculated fibsize=%d "
+ "user_srbcmd->sg.count=%d aac_srb=%d sgentry=%d "
+ "issued fibsize=%d\n",
+ actual_fibsize, user_srbcmd->sg.count,
+ sizeof(struct aac_srb), sizeof(struct sgentry),
+ fibsize));
rcode = -EINVAL;
goto cleanup;
}
@@ -663,6 +670,10 @@
psg->count = cpu_to_le32(sg_indx+1);
status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
}
+ if (status == -EINTR) {
+ rcode = -EINTR;
+ goto cleanup;
+ }
if (status != 0){
dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n"));
@@ -696,8 +707,10 @@
for(i=0; i <= sg_indx; i++){
kfree(sg_list[i]);
}
- aac_fib_complete(srbfib);
- aac_fib_free(srbfib);
+ if (rcode != -EINTR) {
+ aac_fib_complete(srbfib);
+ aac_fib_free(srbfib);
+ }
return rcode;
}
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 1cd3584..d5cf8b9 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -180,7 +180,7 @@
-2 /* Timeout silently */, 1,
NULL, NULL);
- if (status == 0)
+ if (status >= 0)
aac_fib_complete(fibctx);
aac_fib_free(fibctx);
return status;
@@ -307,17 +307,12 @@
if (status[1] & AAC_OPT_NEW_COMM)
dev->new_comm_interface = dev->a_ops.adapter_send != 0;
if (dev->new_comm_interface && (status[2] > dev->base_size)) {
- iounmap(dev->regs.sa);
+ aac_adapter_ioremap(dev, 0);
dev->base_size = status[2];
- dprintk((KERN_DEBUG "ioremap(%lx,%d)\n",
- host->base, status[2]));
- dev->regs.sa = ioremap(host->base, status[2]);
- if (dev->regs.sa == NULL) {
+ if (aac_adapter_ioremap(dev, status[2])) {
/* remap failed, go back ... */
dev->new_comm_interface = 0;
- dev->regs.sa = ioremap(host->base,
- AAC_MIN_FOOTPRINT_SIZE);
- if (dev->regs.sa == NULL) {
+ if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) {
printk(KERN_WARNING
"aacraid: unable to map adapter.\n");
return NULL;
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 3f27419..8734a04 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -40,8 +40,10 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
#include <asm/semaphore.h>
#include "aacraid.h"
@@ -464,6 +466,8 @@
dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr));
+ if (!dev->queues)
+ return -EBUSY;
q = &dev->queues->queue[AdapNormCmdQueue];
if(wait)
@@ -527,8 +531,15 @@
}
udelay(5);
}
- } else
- down(&fibptr->event_wait);
+ } else if (down_interruptible(&fibptr->event_wait)) {
+ spin_lock_irqsave(&fibptr->event_lock, flags);
+ if (fibptr->done == 0) {
+ fibptr->done = 2; /* Tell interrupt we aborted */
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ return -EINTR;
+ }
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ }
BUG_ON(fibptr->done == 0);
if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){
@@ -795,7 +806,7 @@
/* Sniff for container changes */
- if (!dev)
+ if (!dev || !dev->fsa_dev)
return;
container = (u32)-1;
@@ -1022,13 +1033,7 @@
if (device) {
switch (device_config_needed) {
case DELETE:
- scsi_remove_device(device);
- break;
case CHANGE:
- if (!dev->fsa_dev[container].valid) {
- scsi_remove_device(device);
- break;
- }
scsi_rescan_device(&device->sdev_gendev);
default:
@@ -1045,6 +1050,262 @@
}
+static int _aac_reset_adapter(struct aac_dev *aac)
+{
+ int index, quirks;
+ u32 ret;
+ int retval;
+ struct Scsi_Host *host;
+ struct scsi_device *dev;
+ struct scsi_cmnd *command;
+ struct scsi_cmnd *command_list;
+
+ /*
+ * Assumptions:
+ * - host is locked.
+ * - in_reset is asserted, so no new i/o is getting to the
+ * card.
+ * - The card is dead.
+ */
+ host = aac->scsi_host_ptr;
+ scsi_block_requests(host);
+ aac_adapter_disable_int(aac);
+ spin_unlock_irq(host->host_lock);
+ kthread_stop(aac->thread);
+
+ /*
+ * If a positive health, means in a known DEAD PANIC
+ * state and the adapter could be reset to `try again'.
+ */
+ retval = aac_adapter_check_health(aac);
+ if (retval == 0)
+ retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS,
+ 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+ if (retval)
+ retval = aac_adapter_sync_cmd(aac, IOP_RESET,
+ 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+
+ if (retval)
+ goto out;
+ if (ret != 0x00000001) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ index = aac->cardtype;
+
+ /*
+ * Re-initialize the adapter, first free resources, then carefully
+ * apply the initialization sequence to come back again. Only risk
+ * is a change in Firmware dropping cache, it is assumed the caller
+ * will ensure that i/o is queisced and the card is flushed in that
+ * case.
+ */
+ aac_fib_map_free(aac);
+ aac->hw_fib_va = NULL;
+ aac->hw_fib_pa = 0;
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+ aac->comm_addr = NULL;
+ aac->comm_phys = 0;
+ kfree(aac->queues);
+ aac->queues = NULL;
+ free_irq(aac->pdev->irq, aac);
+ kfree(aac->fsa_dev);
+ aac->fsa_dev = NULL;
+ if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) {
+ if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
+ ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
+ goto out;
+ } else {
+ if (((retval = pci_set_dma_mask(aac->pdev, 0x7FFFFFFFULL))) ||
+ ((retval = pci_set_consistent_dma_mask(aac->pdev, 0x7FFFFFFFULL))))
+ goto out;
+ }
+ if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
+ goto out;
+ if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
+ if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
+ goto out;
+ aac->thread = kthread_run(aac_command_thread, aac, aac->name);
+ if (IS_ERR(aac->thread)) {
+ retval = PTR_ERR(aac->thread);
+ goto out;
+ }
+ (void)aac_get_adapter_info(aac);
+ quirks = aac_get_driver_ident(index)->quirks;
+ if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
+ host->sg_tablesize = 34;
+ host->max_sectors = (host->sg_tablesize * 8) + 112;
+ }
+ if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
+ host->sg_tablesize = 17;
+ host->max_sectors = (host->sg_tablesize * 8) + 112;
+ }
+ aac_get_config_status(aac, 1);
+ aac_get_containers(aac);
+ /*
+ * This is where the assumption that the Adapter is quiesced
+ * is important.
+ */
+ command_list = NULL;
+ __shost_for_each_device(dev, host) {
+ unsigned long flags;
+ spin_lock_irqsave(&dev->list_lock, flags);
+ list_for_each_entry(command, &dev->cmd_list, list)
+ if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
+ command->SCp.buffer = (struct scatterlist *)command_list;
+ command_list = command;
+ }
+ spin_unlock_irqrestore(&dev->list_lock, flags);
+ }
+ while ((command = command_list)) {
+ command_list = (struct scsi_cmnd *)command->SCp.buffer;
+ command->SCp.buffer = NULL;
+ command->result = DID_OK << 16
+ | COMMAND_COMPLETE << 8
+ | SAM_STAT_TASK_SET_FULL;
+ command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+ command->scsi_done(command);
+ }
+ retval = 0;
+
+out:
+ aac->in_reset = 0;
+ scsi_unblock_requests(host);
+ spin_lock_irq(host->host_lock);
+ return retval;
+}
+
+int aac_check_health(struct aac_dev * aac)
+{
+ int BlinkLED;
+ unsigned long time_now, flagv = 0;
+ struct list_head * entry;
+ struct Scsi_Host * host;
+
+ /* Extending the scope of fib_lock slightly to protect aac->in_reset */
+ if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
+ return 0;
+
+ if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+ return 0; /* OK */
+ }
+
+ aac->in_reset = 1;
+
+ /* Fake up an AIF:
+ * aac_aifcmd.command = AifCmdEventNotify = 1
+ * aac_aifcmd.seqnum = 0xFFFFFFFF
+ * aac_aifcmd.data[0] = AifEnExpEvent = 23
+ * aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
+ * aac.aifcmd.data[2] = AifHighPriority = 3
+ * aac.aifcmd.data[3] = BlinkLED
+ */
+
+ time_now = jiffies/HZ;
+ entry = aac->fib_list.next;
+
+ /*
+ * For each Context that is on the
+ * fibctxList, make a copy of the
+ * fib, and then set the event to wake up the
+ * thread that is waiting for it.
+ */
+ while (entry != &aac->fib_list) {
+ /*
+ * Extract the fibctx
+ */
+ struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
+ struct hw_fib * hw_fib;
+ struct fib * fib;
+ /*
+ * Check if the queue is getting
+ * backlogged
+ */
+ if (fibctx->count > 20) {
+ /*
+ * It's *not* jiffies folks,
+ * but jiffies / HZ, so do not
+ * panic ...
+ */
+ u32 time_last = fibctx->jiffies;
+ /*
+ * Has it been > 2 minutes
+ * since the last read off
+ * the queue?
+ */
+ if ((time_now - time_last) > aif_timeout) {
+ entry = entry->next;
+ aac_close_fib_context(aac, fibctx);
+ continue;
+ }
+ }
+ /*
+ * Warning: no sleep allowed while
+ * holding spinlock
+ */
+ hw_fib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC);
+ fib = kmalloc(sizeof(struct fib), GFP_ATOMIC);
+ if (fib && hw_fib) {
+ struct aac_aifcmd * aif;
+
+ memset(hw_fib, 0, sizeof(struct hw_fib));
+ memset(fib, 0, sizeof(struct fib));
+ fib->hw_fib = hw_fib;
+ fib->dev = aac;
+ aac_fib_init(fib);
+ fib->type = FSAFS_NTC_FIB_CONTEXT;
+ fib->size = sizeof (struct fib);
+ fib->data = hw_fib->data;
+ aif = (struct aac_aifcmd *)hw_fib->data;
+ aif->command = cpu_to_le32(AifCmdEventNotify);
+ aif->seqnum = cpu_to_le32(0xFFFFFFFF);
+ aif->data[0] = cpu_to_le32(AifEnExpEvent);
+ aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
+ aif->data[2] = cpu_to_le32(AifHighPriority);
+ aif->data[3] = cpu_to_le32(BlinkLED);
+
+ /*
+ * Put the FIB onto the
+ * fibctx's fibs
+ */
+ list_add_tail(&fib->fiblink, &fibctx->fib_list);
+ fibctx->count++;
+ /*
+ * Set the event to wake up the
+ * thread that will waiting.
+ */
+ up(&fibctx->wait_sem);
+ } else {
+ printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
+ kfree(fib);
+ kfree(hw_fib);
+ }
+ entry = entry->next;
+ }
+
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+
+ if (BlinkLED < 0) {
+ printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
+ goto out;
+ }
+
+ printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
+
+ host = aac->scsi_host_ptr;
+ spin_lock_irqsave(host->host_lock, flagv);
+ BlinkLED = _aac_reset_adapter(aac);
+ spin_unlock_irqrestore(host->host_lock, flagv);
+ return BlinkLED;
+
+out:
+ aac->in_reset = 0;
+ return BlinkLED;
+}
+
+
/**
* aac_command_thread - command processing thread
* @dev: Adapter to monitor
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index b2a5c72..8335f07 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -124,10 +124,15 @@
} else {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
- fib->done = 1;
+ if (!fib->done)
+ fib->done = 1;
up(&fib->event_wait);
spin_unlock_irqrestore(&fib->event_lock, flagv);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+ if (fib->done == 2) {
+ aac_fib_complete(fib);
+ aac_fib_free(fib);
+ }
}
consumed++;
spin_lock_irqsave(q->lock, flags);
@@ -316,7 +321,8 @@
unsigned long flagv;
dprintk((KERN_INFO "event_wait up\n"));
spin_lock_irqsave(&fib->event_lock, flagv);
- fib->done = 1;
+ if (!fib->done)
+ fib->done = 1;
up(&fib->event_wait);
spin_unlock_irqrestore(&fib->event_lock, flagv);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index e42a479..359e7dd 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -82,6 +82,8 @@
static int aac_cfg_major = -1;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
+extern int expose_physicals;
+
/*
* Because of the way Linux names scsi devices, the order in this table has
* become important. Check for on-board Raid first, add-in cards second.
@@ -394,6 +396,7 @@
sdev->skip_ms_page_3f = 1;
}
if ((sdev->type == TYPE_DISK) &&
+ !expose_physicals &&
(sdev_channel(sdev) != CONTAINER_CHANNEL)) {
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
@@ -454,17 +457,17 @@
printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
aac = (struct aac_dev *)host->hostdata;
- if (aac_adapter_check_health(aac)) {
- printk(KERN_ERR "%s: Host adapter appears dead\n",
- AAC_DRIVERNAME);
- return -ENODEV;
- }
+
+ if ((count = aac_check_health(aac)))
+ return count;
/*
* Wait for all commands to complete to this specific
* target (block maximum 60 seconds).
*/
for (count = 60; count; --count) {
- int active = 0;
+ int active = aac->in_reset;
+
+ if (active == 0)
__shost_for_each_device(dev, host) {
spin_lock_irqsave(&dev->list_lock, flags);
list_for_each_entry(command, &dev->cmd_list, list) {
@@ -864,13 +867,6 @@
* Map in the registers from the adapter.
*/
aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
- if ((aac->regs.sa = ioremap(
- (unsigned long)aac->scsi_host_ptr->base, AAC_MIN_FOOTPRINT_SIZE))
- == NULL) {
- printk(KERN_WARNING "%s: unable to map adapter.\n",
- AAC_DRIVERNAME);
- goto out_free_fibs;
- }
if ((*aac_drivers[index].init)(aac))
goto out_unmap;
@@ -928,12 +924,12 @@
* all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
* physical channels are address by their actual physical number+1
*/
- if (aac->nondasd_support == 1)
+ if ((aac->nondasd_support == 1) || expose_physicals)
shost->max_channel = aac->maximum_num_channels;
else
shost->max_channel = 0;
- aac_get_config_status(aac);
+ aac_get_config_status(aac, 0);
aac_get_containers(aac);
list_add(&aac->entry, insert);
@@ -969,8 +965,7 @@
aac_fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
kfree(aac->queues);
- iounmap(aac->regs.sa);
- out_free_fibs:
+ aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
kfree(aac->fsa_dev);
out_free_host:
@@ -1005,7 +1000,7 @@
kfree(aac->queues);
free_irq(pdev->irq, aac);
- iounmap(aac->regs.sa);
+ aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
kfree(aac->fsa_dev);
@@ -1013,6 +1008,10 @@
list_del(&aac->entry);
scsi_host_put(shost);
pci_disable_device(pdev);
+ if (list_empty(&aac_devices)) {
+ unregister_chrdev(aac_cfg_major, "aac");
+ aac_cfg_major = -1;
+ }
}
static struct pci_driver aac_pci_driver = {
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 458ea89..643f23b 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -28,370 +28,27 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/completion.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <asm/semaphore.h>
#include <scsi/scsi_host.h>
#include "aacraid.h"
-static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
+/**
+ * aac_rkt_ioremap
+ * @size: mapping resize request
+ *
+ */
+static int aac_rkt_ioremap(struct aac_dev * dev, u32 size)
{
- struct aac_dev *dev = dev_id;
-
- if (dev->new_comm_interface) {
- u32 Index = rkt_readl(dev, MUnit.OutboundQueue);
- if (Index == 0xFFFFFFFFL)
- Index = rkt_readl(dev, MUnit.OutboundQueue);
- if (Index != 0xFFFFFFFFL) {
- do {
- if (aac_intr_normal(dev, Index)) {
- rkt_writel(dev, MUnit.OutboundQueue, Index);
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
- }
- Index = rkt_readl(dev, MUnit.OutboundQueue);
- } while (Index != 0xFFFFFFFFL);
- return IRQ_HANDLED;
- }
- } else {
- unsigned long bellbits;
- u8 intstat;
- intstat = rkt_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- * Check to see if this is our interrupt. If it isn't just return
- */
- if (intstat & ~(dev->OIMR))
- {
- bellbits = rkt_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5]));
- rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
-// rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- }
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
- }
- return IRQ_HANDLED;
- }
+ if (!size) {
+ iounmap(dev->regs.rkt);
+ return 0;
}
- return IRQ_NONE;
-}
-
-/**
- * aac_rkt_disable_interrupt - Disable interrupts
- * @dev: Adapter
- */
-
-static void aac_rkt_disable_interrupt(struct aac_dev *dev)
-{
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
-}
-
-/**
- * rkt_sync_cmd - send a command and wait
- * @dev: Adapter
- * @command: Command to execute
- * @p1: first parameter
- * @ret: adapter status
- *
- * This routine will send a synchronous command to the adapter and wait
- * for its completion.
- */
-
-static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
- u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
- u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4)
-{
- unsigned long start;
- int ok;
- /*
- * Write the command into Mailbox 0
- */
- rkt_writel(dev, InboundMailbox0, command);
- /*
- * Write the parameters into Mailboxes 1 - 6
- */
- rkt_writel(dev, InboundMailbox1, p1);
- rkt_writel(dev, InboundMailbox2, p2);
- rkt_writel(dev, InboundMailbox3, p3);
- rkt_writel(dev, InboundMailbox4, p4);
- /*
- * Clear the synch command doorbell to start on a clean slate.
- */
- rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
- /*
- * Disable doorbell interrupts
- */
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
- /*
- * Force the completion of the mask register write before issuing
- * the interrupt.
- */
- rkt_readb (dev, MUnit.OIMR);
- /*
- * Signal that there is a new synch command
- */
- rkt_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
-
- ok = 0;
- start = jiffies;
-
- /*
- * Wait up to 30 seconds
- */
- while (time_before(jiffies, start+30*HZ))
- {
- udelay(5); /* Delay 5 microseconds to let Mon960 get info. */
- /*
- * Mon960 will set doorbell0 bit when it has completed the command.
- */
- if (rkt_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
- /*
- * Clear the doorbell.
- */
- rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
- ok = 1;
- break;
- }
- /*
- * Yield the processor in case we are slow
- */
- msleep(1);
- }
- if (ok != 1) {
- /*
- * Restore interrupt mask even though we timed out
- */
- if (dev->new_comm_interface)
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
- else
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
- return -ETIMEDOUT;
- }
- /*
- * Pull the synch status from Mailbox 0.
- */
- if (status)
- *status = rkt_readl(dev, IndexRegs.Mailbox[0]);
- if (r1)
- *r1 = rkt_readl(dev, IndexRegs.Mailbox[1]);
- if (r2)
- *r2 = rkt_readl(dev, IndexRegs.Mailbox[2]);
- if (r3)
- *r3 = rkt_readl(dev, IndexRegs.Mailbox[3]);
- if (r4)
- *r4 = rkt_readl(dev, IndexRegs.Mailbox[4]);
- /*
- * Clear the synch command doorbell.
- */
- rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
- /*
- * Restore interrupt mask
- */
- if (dev->new_comm_interface)
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
- else
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
- return 0;
-
-}
-
-/**
- * aac_rkt_interrupt_adapter - interrupt adapter
- * @dev: Adapter
- *
- * Send an interrupt to the i960 and breakpoint it.
- */
-
-static void aac_rkt_interrupt_adapter(struct aac_dev *dev)
-{
- rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0,
- NULL, NULL, NULL, NULL, NULL);
-}
-
-/**
- * aac_rkt_notify_adapter - send an event to the adapter
- * @dev: Adapter
- * @event: Event to send
- *
- * Notify the i960 that something it probably cares about has
- * happened.
- */
-
-static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event)
-{
- switch (event) {
-
- case AdapNormCmdQue:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
- break;
- case HostNormRespNotFull:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
- break;
- case AdapNormRespQue:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
- break;
- case HostNormCmdNotFull:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
- break;
- case HostShutdown:
-// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
-// NULL, NULL, NULL, NULL, NULL);
- break;
- case FastIo:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
- break;
- case AdapPrintfDone:
- rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
- break;
- default:
- BUG();
- break;
- }
-}
-
-/**
- * aac_rkt_start_adapter - activate adapter
- * @dev: Adapter
- *
- * Start up processing on an i960 based AAC adapter
- */
-
-static void aac_rkt_start_adapter(struct aac_dev *dev)
-{
- struct aac_init *init;
-
- init = dev->init;
- init->HostElapsedSeconds = cpu_to_le32(get_seconds());
- // We can only use a 32 bit address here
- rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
- 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
-}
-
-/**
- * aac_rkt_check_health
- * @dev: device to check if healthy
- *
- * Will attempt to determine if the specified adapter is alive and
- * capable of handling requests, returning 0 if alive.
- */
-static int aac_rkt_check_health(struct aac_dev *dev)
-{
- u32 status = rkt_readl(dev, MUnit.OMRx[0]);
-
- /*
- * Check to see if the board failed any self tests.
- */
- if (status & SELF_TEST_FAILED)
+ dev->base = dev->regs.rkt = ioremap(dev->scsi_host_ptr->base, size);
+ if (dev->base == NULL)
return -1;
- /*
- * Check to see if the board panic'd.
- */
- if (status & KERNEL_PANIC) {
- char * buffer;
- struct POSTSTATUS {
- __le32 Post_Command;
- __le32 Post_Address;
- } * post;
- dma_addr_t paddr, baddr;
- int ret;
-
- if ((status & 0xFF000000L) == 0xBC000000L)
- return (status >> 16) & 0xFF;
- buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
- ret = -2;
- if (buffer == NULL)
- return ret;
- post = pci_alloc_consistent(dev->pdev,
- sizeof(struct POSTSTATUS), &paddr);
- if (post == NULL) {
- pci_free_consistent(dev->pdev, 512, buffer, baddr);
- return ret;
- }
- memset(buffer, 0, 512);
- post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
- post->Post_Address = cpu_to_le32(baddr);
- rkt_writel(dev, MUnit.IMRx[0], paddr);
- rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
- NULL, NULL, NULL, NULL, NULL);
- pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
- post, paddr);
- if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) {
- ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
- ret <<= 4;
- ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
- }
- pci_free_consistent(dev->pdev, 512, buffer, baddr);
- return ret;
- }
- /*
- * Wait for the adapter to be up and running.
- */
- if (!(status & KERNEL_UP_AND_RUNNING))
- return -3;
- /*
- * Everything is OK
- */
- return 0;
-}
-
-/**
- * aac_rkt_send
- * @fib: fib to issue
- *
- * Will send a fib, returning 0 if successful.
- */
-static int aac_rkt_send(struct fib * fib)
-{
- u64 addr = fib->hw_fib_pa;
- struct aac_dev *dev = fib->dev;
- volatile void __iomem *device = dev->regs.rkt;
- u32 Index;
-
- dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr));
- Index = rkt_readl(dev, MUnit.InboundQueue);
- if (Index == 0xFFFFFFFFL)
- Index = rkt_readl(dev, MUnit.InboundQueue);
- dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
- if (Index == 0xFFFFFFFFL)
- return Index;
- device += Index;
- dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
- (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
- writel((u32)(addr & 0xffffffff), device);
- device += sizeof(u32);
- writel((u32)(addr >> 32), device);
- device += sizeof(u32);
- writel(le16_to_cpu(fib->hw_fib->header.Size), device);
- rkt_writel(dev, MUnit.InboundQueue, Index);
- dprintk((KERN_DEBUG "aac_rkt_send - return 0\n"));
+ dev->IndexRegs = &dev->regs.rkt->IndexRegs;
return 0;
}
@@ -406,78 +63,18 @@
int aac_rkt_init(struct aac_dev *dev)
{
- unsigned long start;
- unsigned long status;
- int instance;
- const char * name;
+ int retval;
+ extern int _aac_rx_init(struct aac_dev *dev);
+ extern void aac_rx_start_adapter(struct aac_dev *dev);
- instance = dev->id;
- name = dev->name;
-
- /*
- * Check to see if the board panic'd while booting.
- */
- /*
- * Check to see if the board failed any self tests.
- */
- if (rkt_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
- printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
- goto error_iounmap;
- }
- /*
- * Check to see if the monitor panic'd while booting.
- */
- if (rkt_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
- printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
- goto error_iounmap;
- }
- /*
- * Check to see if the board panic'd while booting.
- */
- if (rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
- printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance);
- goto error_iounmap;
- }
- start = jiffies;
- /*
- * Wait for the adapter to be up and running. Wait up to 3 minutes
- */
- while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING))
- {
- if(time_after(jiffies, start+startup_timeout*HZ))
- {
- status = rkt_readl(dev, MUnit.OMRx[0]);
- printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
- dev->name, instance, status);
- goto error_iounmap;
- }
- msleep(1);
- }
- if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
- {
- printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
- goto error_iounmap;
- }
/*
* Fill in the function dispatch table.
*/
- dev->a_ops.adapter_interrupt = aac_rkt_interrupt_adapter;
- dev->a_ops.adapter_disable_int = aac_rkt_disable_interrupt;
- dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
- dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
- dev->a_ops.adapter_check_health = aac_rkt_check_health;
- dev->a_ops.adapter_send = aac_rkt_send;
+ dev->a_ops.adapter_ioremap = aac_rkt_ioremap;
- /*
- * First clear out all interrupts. Then enable the one's that we
- * can handle.
- */
- rkt_writeb(dev, MUnit.OIMR, 0xff);
- rkt_writel(dev, MUnit.ODR, 0xffffffff);
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
-
- if (aac_init_adapter(dev) == NULL)
- goto error_irq;
+ retval = _aac_rx_init(dev);
+ if (retval)
+ return retval;
if (dev->new_comm_interface) {
/*
* FIB Setup has already been done, but we can minimize the
@@ -494,20 +91,11 @@
dev->init->MaxIoCommands = cpu_to_le32(246);
dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB;
}
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
}
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
*/
- aac_rkt_start_adapter(dev);
+ aac_rx_start_adapter(dev);
return 0;
-
-error_irq:
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
- free_irq(dev->scsi_host_ptr->irq, (void *)dev);
-
-error_iounmap:
-
- return -1;
}
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 035018d..a1d214d 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -79,7 +79,7 @@
{
bellbits = rx_readl(dev, OutboundDoorbellReg);
if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5]));
+ aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
@@ -134,14 +134,14 @@
/*
* Write the command into Mailbox 0
*/
- rx_writel(dev, InboundMailbox0, command);
+ writel(command, &dev->IndexRegs->Mailbox[0]);
/*
* Write the parameters into Mailboxes 1 - 6
*/
- rx_writel(dev, InboundMailbox1, p1);
- rx_writel(dev, InboundMailbox2, p2);
- rx_writel(dev, InboundMailbox3, p3);
- rx_writel(dev, InboundMailbox4, p4);
+ writel(p1, &dev->IndexRegs->Mailbox[1]);
+ writel(p2, &dev->IndexRegs->Mailbox[2]);
+ writel(p3, &dev->IndexRegs->Mailbox[3]);
+ writel(p4, &dev->IndexRegs->Mailbox[4]);
/*
* Clear the synch command doorbell to start on a clean slate.
*/
@@ -199,15 +199,15 @@
* Pull the synch status from Mailbox 0.
*/
if (status)
- *status = rx_readl(dev, IndexRegs.Mailbox[0]);
+ *status = readl(&dev->IndexRegs->Mailbox[0]);
if (r1)
- *r1 = rx_readl(dev, IndexRegs.Mailbox[1]);
+ *r1 = readl(&dev->IndexRegs->Mailbox[1]);
if (r2)
- *r2 = rx_readl(dev, IndexRegs.Mailbox[2]);
+ *r2 = readl(&dev->IndexRegs->Mailbox[2]);
if (r3)
- *r3 = rx_readl(dev, IndexRegs.Mailbox[3]);
+ *r3 = readl(&dev->IndexRegs->Mailbox[3]);
if (r4)
- *r4 = rx_readl(dev, IndexRegs.Mailbox[4]);
+ *r4 = readl(&dev->IndexRegs->Mailbox[4]);
/*
* Clear the synch command doorbell.
*/
@@ -261,8 +261,6 @@
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
break;
case HostShutdown:
-// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
-// NULL, NULL, NULL, NULL, NULL);
break;
case FastIo:
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
@@ -283,7 +281,7 @@
* Start up processing on an i960 based AAC adapter
*/
-static void aac_rx_start_adapter(struct aac_dev *dev)
+void aac_rx_start_adapter(struct aac_dev *dev)
{
struct aac_init *init;
@@ -381,7 +379,7 @@
dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
if (Index == 0xFFFFFFFFL)
return Index;
- device += Index;
+ device = dev->base + Index;
dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
(u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
writel((u32)(addr & 0xffffffff), device);
@@ -395,6 +393,43 @@
}
/**
+ * aac_rx_ioremap
+ * @size: mapping resize request
+ *
+ */
+static int aac_rx_ioremap(struct aac_dev * dev, u32 size)
+{
+ if (!size) {
+ iounmap(dev->regs.rx);
+ return 0;
+ }
+ dev->base = dev->regs.rx = ioremap(dev->scsi_host_ptr->base, size);
+ if (dev->base == NULL)
+ return -1;
+ dev->IndexRegs = &dev->regs.rx->IndexRegs;
+ return 0;
+}
+
+static int aac_rx_restart_adapter(struct aac_dev *dev)
+{
+ u32 var;
+
+ printk(KERN_ERR "%s%d: adapter kernel panic'd.\n",
+ dev->name, dev->id);
+
+ if (aac_rx_check_health(dev) <= 0)
+ return 1;
+ if (rx_sync_cmd(dev, IOP_RESET, 0, 0, 0, 0, 0, 0,
+ &var, NULL, NULL, NULL, NULL))
+ return 1;
+ if (var != 0x00000001)
+ return 1;
+ if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
+ return 1;
+ return 0;
+}
+
+/**
* aac_rx_init - initialize an i960 based AAC card
* @dev: device to configure
*
@@ -403,7 +438,7 @@
* to the comm region.
*/
-int aac_rx_init(struct aac_dev *dev)
+int _aac_rx_init(struct aac_dev *dev)
{
unsigned long start;
unsigned long status;
@@ -413,27 +448,30 @@
instance = dev->id;
name = dev->name;
+ if (aac_adapter_ioremap(dev, dev->base_size)) {
+ printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+ goto error_iounmap;
+ }
+
/*
* Check to see if the board panic'd while booting.
*/
+ status = rx_readl(dev, MUnit.OMRx[0]);
+ if (status & KERNEL_PANIC)
+ if (aac_rx_restart_adapter(dev))
+ goto error_iounmap;
/*
* Check to see if the board failed any self tests.
*/
- if (rx_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
+ status = rx_readl(dev, MUnit.OMRx[0]);
+ if (status & SELF_TEST_FAILED) {
printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
goto error_iounmap;
}
/*
- * Check to see if the board panic'd while booting.
- */
- if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
- printk(KERN_ERR "%s%d: adapter kernel panic.\n", dev->name, instance);
- goto error_iounmap;
- }
- /*
* Check to see if the monitor panic'd while booting.
*/
- if (rx_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
+ if (status & MONITOR_PANIC) {
printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
goto error_iounmap;
}
@@ -441,12 +479,10 @@
/*
* Wait for the adapter to be up and running. Wait up to 3 minutes
*/
- while ((!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING))
- || (!(rx_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)))
+ while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
{
if(time_after(jiffies, start+startup_timeout*HZ))
{
- status = rx_readl(dev, IndexRegs.Mailbox[7]);
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
dev->name, instance, status);
goto error_iounmap;
@@ -481,11 +517,6 @@
if (dev->new_comm_interface)
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
- /*
- * Tell the adapter that all is configured, and it can start
- * accepting requests
- */
- aac_rx_start_adapter(dev);
return 0;
error_irq:
@@ -496,3 +527,23 @@
return -1;
}
+
+int aac_rx_init(struct aac_dev *dev)
+{
+ int retval;
+
+ /*
+ * Fill in the function dispatch table.
+ */
+ dev->a_ops.adapter_ioremap = aac_rx_ioremap;
+
+ retval = _aac_rx_init(dev);
+ if (!retval) {
+ /*
+ * Tell the adapter that all is configured, and it can
+ * start accepting requests
+ */
+ aac_rx_start_adapter(dev);
+ }
+ return retval;
+}
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index cd586cc..f906ead 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -281,6 +281,21 @@
}
/**
+ * aac_sa_ioremap
+ * @size: mapping resize request
+ *
+ */
+static int aac_sa_ioremap(struct aac_dev * dev, u32 size)
+{
+ if (!size) {
+ iounmap(dev->regs.sa);
+ return 0;
+ }
+ dev->base = dev->regs.sa = ioremap(dev->scsi_host_ptr->base, size);
+ return (dev->base == NULL) ? -1 : 0;
+}
+
+/**
* aac_sa_init - initialize an ARM based AAC card
* @dev: device to configure
*
@@ -299,6 +314,11 @@
instance = dev->id;
name = dev->name;
+ if (aac_sa_ioremap(dev, dev->base_size)) {
+ printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+ goto error_iounmap;
+ }
+
/*
* Check to see if the board failed any self tests.
*/
@@ -341,6 +361,7 @@
dev->a_ops.adapter_notify = aac_sa_notify_adapter;
dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
dev->a_ops.adapter_check_health = aac_sa_check_health;
+ dev->a_ops.adapter_ioremap = aac_sa_ioremap;
/*
* First clear out all interrupts. Then enable the one's that
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index e32b4ab..773f02e 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -888,10 +888,6 @@
#define ASC_PCI_ID2DEV(id) (((id) >> 11) & 0x1F)
#define ASC_PCI_ID2FUNC(id) (((id) >> 8) & 0x7)
#define ASC_PCI_MKID(bus, dev, func) ((((dev) & 0x1F) << 11) | (((func) & 0x7) << 8) | ((bus) & 0xFF))
-#define ASC_PCI_VENDORID 0x10CD
-#define ASC_PCI_DEVICEID_1200A 0x1100
-#define ASC_PCI_DEVICEID_1200B 0x1200
-#define ASC_PCI_DEVICEID_ULTRA 0x1300
#define ASC_PCI_REVISION_3150 0x02
#define ASC_PCI_REVISION_3050 0x03
@@ -899,6 +895,14 @@
#define ASC_DVCLIB_CALL_FAILED (0)
#define ASC_DVCLIB_CALL_ERROR (-1)
+#define PCI_VENDOR_ID_ASP 0x10cd
+#define PCI_DEVICE_ID_ASP_1200A 0x1100
+#define PCI_DEVICE_ID_ASP_ABP940 0x1200
+#define PCI_DEVICE_ID_ASP_ABP940U 0x1300
+#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300
+#define PCI_DEVICE_ID_38C0800_REV1 0x2500
+#define PCI_DEVICE_ID_38C1600_REV1 0x2700
+
/*
* Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists.
* The SRB structure will have to be changed and the ASC_SRB2SCSIQ()
@@ -1492,8 +1496,6 @@
#define ASC_INIT_STATE_END_INQUIRY 0x0080
#define ASC_INIT_RESET_SCSI_DONE 0x0100
#define ASC_INIT_STATE_WITHOUT_EEP 0x8000
-#define ASC_PCI_DEVICE_ID_REV_A 0x1100
-#define ASC_PCI_DEVICE_ID_REV_B 0x1200
#define ASC_BUG_FIX_IF_NOT_DWB 0x0001
#define ASC_BUG_FIX_ASYN_USE_SYN 0x0002
#define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41
@@ -2100,12 +2102,6 @@
#define ADV_NUM_PAGE_CROSSING \
((ADV_SG_TOTAL_MEM_SIZE + (ADV_PAGE_SIZE - 1))/ADV_PAGE_SIZE)
-/* a_condor.h */
-#define ADV_PCI_VENDOR_ID 0x10CD
-#define ADV_PCI_DEVICE_ID_REV_A 0x2300
-#define ADV_PCI_DEVID_38C0800_REV1 0x2500
-#define ADV_PCI_DEVID_38C1600_REV1 0x2700
-
#define ADV_EEP_DVC_CFG_BEGIN (0x00)
#define ADV_EEP_DVC_CFG_END (0x15)
#define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */
@@ -3569,14 +3565,7 @@
#define PCI_MAX_SLOT 0x1F
#define PCI_MAX_BUS 0xFF
#define PCI_IOADDRESS_MASK 0xFFFE
-#define ASC_PCI_VENDORID 0x10CD
#define ASC_PCI_DEVICE_ID_CNT 6 /* PCI Device ID count. */
-#define ASC_PCI_DEVICE_ID_1100 0x1100
-#define ASC_PCI_DEVICE_ID_1200 0x1200
-#define ASC_PCI_DEVICE_ID_1300 0x1300
-#define ASC_PCI_DEVICE_ID_2300 0x2300 /* ASC-3550 */
-#define ASC_PCI_DEVICE_ID_2500 0x2500 /* ASC-38C0800 */
-#define ASC_PCI_DEVICE_ID_2700 0x2700 /* ASC-38C1600 */
#ifndef ADVANSYS_STATS
#define ASC_STATS(shp, counter)
@@ -4330,12 +4319,12 @@
struct pci_dev *pci_devp = NULL;
int pci_device_id_cnt = 0;
unsigned int pci_device_id[ASC_PCI_DEVICE_ID_CNT] = {
- ASC_PCI_DEVICE_ID_1100,
- ASC_PCI_DEVICE_ID_1200,
- ASC_PCI_DEVICE_ID_1300,
- ASC_PCI_DEVICE_ID_2300,
- ASC_PCI_DEVICE_ID_2500,
- ASC_PCI_DEVICE_ID_2700
+ PCI_DEVICE_ID_ASP_1200A,
+ PCI_DEVICE_ID_ASP_ABP940,
+ PCI_DEVICE_ID_ASP_ABP940U,
+ PCI_DEVICE_ID_ASP_ABP940UW,
+ PCI_DEVICE_ID_38C0800_REV1,
+ PCI_DEVICE_ID_38C1600_REV1
};
ADV_PADDR pci_memory_address;
#endif /* CONFIG_PCI */
@@ -4471,7 +4460,7 @@
/* Find all PCI cards. */
while (pci_device_id_cnt < ASC_PCI_DEVICE_ID_CNT) {
- if ((pci_devp = pci_find_device(ASC_PCI_VENDORID,
+ if ((pci_devp = pci_find_device(PCI_VENDOR_ID_ASP,
pci_device_id[pci_device_id_cnt], pci_devp)) ==
NULL) {
pci_device_id_cnt++;
@@ -4575,9 +4564,9 @@
*/
#ifdef CONFIG_PCI
if (asc_bus[bus] == ASC_IS_PCI &&
- (pci_devp->device == ASC_PCI_DEVICE_ID_2300 ||
- pci_devp->device == ASC_PCI_DEVICE_ID_2500 ||
- pci_devp->device == ASC_PCI_DEVICE_ID_2700))
+ (pci_devp->device == PCI_DEVICE_ID_ASP_ABP940UW ||
+ pci_devp->device == PCI_DEVICE_ID_38C0800_REV1 ||
+ pci_devp->device == PCI_DEVICE_ID_38C1600_REV1))
{
boardp->flags |= ASC_IS_WIDE_BOARD;
}
@@ -4600,11 +4589,11 @@
adv_dvc_varp->isr_callback = adv_isr_callback;
adv_dvc_varp->async_callback = adv_async_callback;
#ifdef CONFIG_PCI
- if (pci_devp->device == ASC_PCI_DEVICE_ID_2300)
+ if (pci_devp->device == PCI_DEVICE_ID_ASP_ABP940UW)
{
ASC_DBG(1, "advansys_detect: ASC-3550\n");
adv_dvc_varp->chip_type = ADV_CHIP_ASC3550;
- } else if (pci_devp->device == ASC_PCI_DEVICE_ID_2500)
+ } else if (pci_devp->device == PCI_DEVICE_ID_38C0800_REV1)
{
ASC_DBG(1, "advansys_detect: ASC-38C0800\n");
adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800;
@@ -11922,7 +11911,7 @@
PCIRevisionID = DvcReadPCIConfigByte(asc_dvc,
AscPCIConfigRevisionIDRegister);
- if (PCIVendorID != ASC_PCI_VENDORID) {
+ if (PCIVendorID != PCI_VENDOR_ID_ASP) {
warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
}
prevCmdRegBits = DvcReadPCIConfigByte(asc_dvc,
@@ -11942,15 +11931,15 @@
warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
}
}
- if ((PCIDeviceID == ASC_PCI_DEVICEID_1200A) ||
- (PCIDeviceID == ASC_PCI_DEVICEID_1200B)) {
+ if ((PCIDeviceID == PCI_DEVICE_ID_ASP_1200A) ||
+ (PCIDeviceID == PCI_DEVICE_ID_ASP_ABP940)) {
DvcWritePCIConfigByte(asc_dvc,
AscPCIConfigLatencyTimer, 0x00);
if (DvcReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer)
!= 0x00) {
warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE;
}
- } else if (PCIDeviceID == ASC_PCI_DEVICEID_ULTRA) {
+ } else if (PCIDeviceID == PCI_DEVICE_ID_ASP_ABP940U) {
if (DvcReadPCIConfigByte(asc_dvc,
AscPCIConfigLatencyTimer) < 0x20) {
DvcWritePCIConfigByte(asc_dvc,
@@ -12037,8 +12026,8 @@
AscSetChipCfgMsw(iop_base, cfg_msw);
if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) {
} else {
- if ((pci_device_id == ASC_PCI_DEVICE_ID_REV_A) ||
- (pci_device_id == ASC_PCI_DEVICE_ID_REV_B)) {
+ if ((pci_device_id == PCI_DEVICE_ID_ASP_1200A) ||
+ (pci_device_id == PCI_DEVICE_ID_ASP_ABP940)) {
asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB;
asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN;
}
@@ -14275,8 +14264,8 @@
0, /* 55 reserved */
0, /* 56 cisptr_lsw */
0, /* 57 cisprt_msw */
- ADV_PCI_VENDOR_ID, /* 58 subsysvid */
- ADV_PCI_DEVID_38C0800_REV1, /* 59 subsysid */
+ PCI_VENDOR_ID_ASP, /* 58 subsysvid */
+ PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */
0, /* 60 reserved */
0, /* 61 reserved */
0, /* 62 reserved */
@@ -14405,8 +14394,8 @@
0, /* 55 reserved */
0, /* 56 cisptr_lsw */
0, /* 57 cisprt_msw */
- ADV_PCI_VENDOR_ID, /* 58 subsysvid */
- ADV_PCI_DEVID_38C1600_REV1, /* 59 subsysid */
+ PCI_VENDOR_ID_ASP, /* 58 subsysvid */
+ PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */
0, /* 60 reserved */
0, /* 61 reserved */
0, /* 62 reserved */
@@ -18225,3 +18214,22 @@
}
}
MODULE_LICENSE("Dual BSD/GPL");
+
+/* PCI Devices supported by this driver */
+static struct pci_device_id advansys_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { }
+};
+MODULE_DEVICE_TABLE(pci, advansys_pci_tbl);
+
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index f974869..fb6a476 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -253,6 +253,7 @@
#include <linux/isapnp.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include <linux/list.h>
#include <asm/semaphore.h>
#include <scsi/scsicam.h>
@@ -262,6 +263,8 @@
#include <scsi/scsi_transport_spi.h>
#include "aha152x.h"
+static LIST_HEAD(aha152x_host_list);
+
/* DEFINES */
@@ -423,8 +426,6 @@
#endif /* !PCMCIA */
-static int registered_count=0;
-static struct Scsi_Host *aha152x_host[2];
static struct scsi_host_template aha152x_driver_template;
/*
@@ -541,6 +542,7 @@
#ifdef __ISAPNP__
struct pnp_dev *pnpdev;
#endif
+ struct list_head host_list;
};
@@ -755,20 +757,9 @@
return ptr;
}
-static inline struct Scsi_Host *lookup_irq(int irqno)
-{
- int i;
-
- for(i=0; i<ARRAY_SIZE(aha152x_host); i++)
- if(aha152x_host[i] && aha152x_host[i]->irq==irqno)
- return aha152x_host[i];
-
- return NULL;
-}
-
static irqreturn_t swintr(int irqno, void *dev_id, struct pt_regs *regs)
{
- struct Scsi_Host *shpnt = lookup_irq(irqno);
+ struct Scsi_Host *shpnt = (struct Scsi_Host *)dev_id;
if (!shpnt) {
printk(KERN_ERR "aha152x: catched software interrupt %d for unknown controller.\n", irqno);
@@ -791,10 +782,11 @@
return NULL;
}
- /* need to have host registered before triggering any interrupt */
- aha152x_host[registered_count] = shpnt;
-
memset(HOSTDATA(shpnt), 0, sizeof *HOSTDATA(shpnt));
+ INIT_LIST_HEAD(&HOSTDATA(shpnt)->host_list);
+
+ /* need to have host registered before triggering any interrupt */
+ list_add_tail(&HOSTDATA(shpnt)->host_list, &aha152x_host_list);
shpnt->io_port = setup->io_port;
shpnt->n_io_port = IO_RANGE;
@@ -907,12 +899,10 @@
scsi_scan_host(shpnt);
- registered_count++;
-
return shpnt;
out_host_put:
- aha152x_host[registered_count]=NULL;
+ list_del(&HOSTDATA(shpnt)->host_list);
scsi_host_put(shpnt);
return NULL;
@@ -937,6 +927,7 @@
#endif
scsi_remove_host(shpnt);
+ list_del(&HOSTDATA(shpnt)->host_list);
scsi_host_put(shpnt);
}
@@ -1459,9 +1450,12 @@
*/
static void run(void)
{
- int i;
- for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
- is_complete(aha152x_host[i]);
+ struct aha152x_hostdata *hd;
+
+ list_for_each_entry(hd, &aha152x_host_list, host_list) {
+ struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
+
+ is_complete(shost);
}
}
@@ -1471,7 +1465,7 @@
*/
static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
{
- struct Scsi_Host *shpnt = lookup_irq(irqno);
+ struct Scsi_Host *shpnt = (struct Scsi_Host *)dev_id;
unsigned long flags;
unsigned char rev, dmacntrl0;
@@ -3953,16 +3947,17 @@
#endif
}
- return registered_count>0;
+ return 1;
}
static void __exit aha152x_exit(void)
{
- int i;
+ struct aha152x_hostdata *hd;
- for(i=0; i<ARRAY_SIZE(setup); i++) {
- aha152x_release(aha152x_host[i]);
- aha152x_host[i]=NULL;
+ list_for_each_entry(hd, &aha152x_host_list, host_list) {
+ struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
+
+ aha152x_release(shost);
}
}
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 998999c..c7eeace 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -321,7 +321,7 @@
MODULE_VERSION(AIC79XX_DRIVER_VERSION);
module_param(aic79xx, charp, 0444);
MODULE_PARM_DESC(aic79xx,
-"period delimited, options string.\n"
+"period-delimited options string:\n"
" verbose Enable verbose/diagnostic logging\n"
" allow_memio Allow device registers to be memory mapped\n"
" debug Bitmask of debug values to enable\n"
@@ -346,7 +346,7 @@
" Shorten the selection timeout to 128ms\n"
"\n"
" options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
-"\n");
+);
static void ahd_linux_handle_scsi_status(struct ahd_softc *,
struct scsi_device *,
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index aa4be8a..64c8b88 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -341,7 +341,7 @@
MODULE_VERSION(AIC7XXX_DRIVER_VERSION);
module_param(aic7xxx, charp, 0444);
MODULE_PARM_DESC(aic7xxx,
-"period delimited, options string.\n"
+"period-delimited options string:\n"
" verbose Enable verbose/diagnostic logging\n"
" allow_memio Allow device registers to be memory mapped\n"
" debug Bitmask of debug values to enable\n"
@@ -2539,15 +2539,28 @@
static void ahc_linux_get_signalling(struct Scsi_Host *shost)
{
struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata;
- u8 mode = ahc_inb(ahc, SBLKCTL);
+ unsigned long flags;
+ u8 mode;
- if (mode & ENAB40)
- spi_signalling(shost) = SPI_SIGNAL_LVD;
- else if (mode & ENAB20)
+ if (!(ahc->features & AHC_ULTRA2)) {
+ /* non-LVD chipset, may not have SBLKCTL reg */
spi_signalling(shost) =
ahc->features & AHC_HVD ?
SPI_SIGNAL_HVD :
SPI_SIGNAL_SE;
+ return;
+ }
+
+ ahc_lock(ahc, &flags);
+ ahc_pause(ahc);
+ mode = ahc_inb(ahc, SBLKCTL);
+ ahc_unpause(ahc);
+ ahc_unlock(ahc, &flags);
+
+ if (mode & ENAB40)
+ spi_signalling(shost) = SPI_SIGNAL_LVD;
+ else if (mode & ENAB20)
+ spi_signalling(shost) = SPI_SIGNAL_SE;
else
spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
}
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 3f85b5e..5dcef48 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -249,8 +249,6 @@
#include <linux/stat.h>
#include <linux/slab.h> /* for kmalloc() */
-#include <linux/config.h> /* for CONFIG_PCI */
-
#define AIC7XXX_C_VERSION "5.2.6"
#define ALL_TARGETS -1
@@ -9196,7 +9194,7 @@
for (i = 0; i < ARRAY_SIZE(aic_pdevs); i++)
{
pdev = NULL;
- while ((pdev = pci_find_device(aic_pdevs[i].vendor_id,
+ while ((pdev = pci_get_device(aic_pdevs[i].vendor_id,
aic_pdevs[i].device_id,
pdev))) {
if (pci_enable_device(pdev))
@@ -9653,6 +9651,9 @@
*/
aic7xxx_configure_bugs(temp_p);
+ /* Hold a pci device reference */
+ pci_dev_get(temp_p->pdev);
+
if ( list_p == NULL )
{
list_p = current_p = temp_p;
@@ -10989,8 +10990,10 @@
if(!p->pdev)
release_region(p->base, MAXREG - MINREG);
#ifdef CONFIG_PCI
- else
+ else {
pci_release_regions(p->pdev);
+ pci_dev_put(p->pdev);
+ }
#endif
prev = NULL;
next = first_aic7xxx;
diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig
new file mode 100644
index 0000000..0ed391d
--- /dev/null
+++ b/drivers/scsi/aic94xx/Kconfig
@@ -0,0 +1,41 @@
+#
+# Kernel configuration file for aic94xx SAS/SATA driver.
+#
+# Copyright (c) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (c) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Aic94xx Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#
+
+config SCSI_AIC94XX
+ tristate "Adaptec AIC94xx SAS/SATA support"
+ depends on PCI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports Adaptec's SAS/SATA 3Gb/s 64 bit PCI-X
+ AIC94xx chip based host adapters.
+
+config AIC94XX_DEBUG
+ bool "Compile in debug mode"
+ default y
+ depends on SCSI_AIC94XX
+ help
+ Compiles the aic94xx driver in debug mode. In debug mode,
+ the driver prints some messages to the console.
diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile
new file mode 100644
index 0000000..e6b7012
--- /dev/null
+++ b/drivers/scsi/aic94xx/Makefile
@@ -0,0 +1,39 @@
+#
+# Makefile for Adaptec aic94xx SAS/SATA driver.
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the aic94xx driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ifeq ($(CONFIG_AIC94XX_DEBUG),y)
+ EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT
+endif
+
+obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o
+aic94xx-y += aic94xx_init.o \
+ aic94xx_hwi.o \
+ aic94xx_reg.o \
+ aic94xx_sds.o \
+ aic94xx_seq.o \
+ aic94xx_dump.o \
+ aic94xx_scb.o \
+ aic94xx_dev.o \
+ aic94xx_tmf.o \
+ aic94xx_task.o
diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
new file mode 100644
index 0000000..1bd5b4e
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -0,0 +1,114 @@
+/*
+ * Aic94xx SAS/SATA driver header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx.h#31 $
+ */
+
+#ifndef _AIC94XX_H_
+#define _AIC94XX_H_
+
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <scsi/libsas.h>
+
+#define ASD_DRIVER_NAME "aic94xx"
+#define ASD_DRIVER_DESCRIPTION "Adaptec aic94xx SAS/SATA driver"
+
+#define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__)
+
+#ifdef ASD_ENTER_EXIT
+#define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
+ __FUNCTION__)
+#define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
+ __FUNCTION__)
+#else
+#define ENTER
+#define EXIT
+#endif
+
+#ifdef ASD_DEBUG
+#define ASD_DPRINTK asd_printk
+#else
+#define ASD_DPRINTK(fmt, ...)
+#endif
+
+/* 2*ITNL timeout + 1 second */
+#define AIC94XX_SCB_TIMEOUT (5*HZ)
+
+extern kmem_cache_t *asd_dma_token_cache;
+extern kmem_cache_t *asd_ascb_cache;
+extern char sas_addr_str[2*SAS_ADDR_SIZE + 1];
+
+static inline void asd_stringify_sas_addr(char *p, const u8 *sas_addr)
+{
+ int i;
+ for (i = 0; i < SAS_ADDR_SIZE; i++, p += 2)
+ snprintf(p, 3, "%02X", sas_addr[i]);
+ *p = '\0';
+}
+
+static inline void asd_destringify_sas_addr(u8 *sas_addr, const char *p)
+{
+ int i;
+ for (i = 0; i < SAS_ADDR_SIZE; i++) {
+ u8 h, l;
+ if (!*p)
+ break;
+ h = isdigit(*p) ? *p-'0' : *p-'A'+10;
+ p++;
+ l = isdigit(*p) ? *p-'0' : *p-'A'+10;
+ p++;
+ sas_addr[i] = (h<<4) | l;
+ }
+}
+
+struct asd_ha_struct;
+struct asd_ascb;
+
+int asd_read_ocm(struct asd_ha_struct *asd_ha);
+int asd_read_flash(struct asd_ha_struct *asd_ha);
+
+int asd_dev_found(struct domain_device *dev);
+void asd_dev_gone(struct domain_device *dev);
+
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
+
+int asd_execute_task(struct sas_task *, int num, unsigned long gfp_flags);
+
+/* ---------- TMFs ---------- */
+int asd_abort_task(struct sas_task *);
+int asd_abort_task_set(struct domain_device *, u8 *lun);
+int asd_clear_aca(struct domain_device *, u8 *lun);
+int asd_clear_task_set(struct domain_device *, u8 *lun);
+int asd_lu_reset(struct domain_device *, u8 *lun);
+int asd_query_task(struct sas_task *);
+
+/* ---------- Adapter and Port management ---------- */
+int asd_clear_nexus_port(struct asd_sas_port *port);
+int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha);
+
+/* ---------- Phy Management ---------- */
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg);
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
new file mode 100644
index 0000000..6f8901b
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -0,0 +1,353 @@
+/*
+ * Aic94xx SAS/SATA DDB management
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_dev.c#21 $
+ */
+
+#include "aic94xx.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_sas.h"
+
+#define FIND_FREE_DDB(_ha) find_first_zero_bit((_ha)->hw_prof.ddb_bitmap, \
+ (_ha)->hw_prof.max_ddbs)
+#define SET_DDB(_ddb, _ha) set_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+#define CLEAR_DDB(_ddb, _ha) clear_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+
+static inline int asd_get_ddb(struct asd_ha_struct *asd_ha)
+{
+ unsigned long flags;
+ int ddb, i;
+
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+ ddb = FIND_FREE_DDB(asd_ha);
+ if (ddb >= asd_ha->hw_prof.max_ddbs) {
+ ddb = -ENOMEM;
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+ goto out;
+ }
+ SET_DDB(ddb, asd_ha);
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+
+ for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
+ asd_ddbsite_write_dword(asd_ha, ddb, i, 0);
+out:
+ return ddb;
+}
+
+#define INIT_CONN_TAG offsetof(struct asd_ddb_ssp_smp_target_port, init_conn_tag)
+#define DEST_SAS_ADDR offsetof(struct asd_ddb_ssp_smp_target_port, dest_sas_addr)
+#define SEND_QUEUE_HEAD offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_head)
+#define DDB_TYPE offsetof(struct asd_ddb_ssp_smp_target_port, ddb_type)
+#define CONN_MASK offsetof(struct asd_ddb_ssp_smp_target_port, conn_mask)
+#define DDB_TARG_FLAGS offsetof(struct asd_ddb_ssp_smp_target_port, flags)
+#define DDB_TARG_FLAGS2 offsetof(struct asd_ddb_stp_sata_target_port, flags2)
+#define EXEC_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, exec_queue_tail)
+#define SEND_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_tail)
+#define SISTER_DDB offsetof(struct asd_ddb_ssp_smp_target_port, sister_ddb)
+#define MAX_CCONN offsetof(struct asd_ddb_ssp_smp_target_port, max_concurrent_conn)
+#define NUM_CTX offsetof(struct asd_ddb_ssp_smp_target_port, num_contexts)
+#define ATA_CMD_SCBPTR offsetof(struct asd_ddb_stp_sata_target_port, ata_cmd_scbptr)
+#define SATA_TAG_ALLOC_MASK offsetof(struct asd_ddb_stp_sata_target_port, sata_tag_alloc_mask)
+#define NUM_SATA_TAGS offsetof(struct asd_ddb_stp_sata_target_port, num_sata_tags)
+#define SATA_STATUS offsetof(struct asd_ddb_stp_sata_target_port, sata_status)
+#define NCQ_DATA_SCB_PTR offsetof(struct asd_ddb_stp_sata_target_port, ncq_data_scb_ptr)
+#define ITNL_TIMEOUT offsetof(struct asd_ddb_ssp_smp_target_port, itnl_timeout)
+
+static inline void asd_free_ddb(struct asd_ha_struct *asd_ha, int ddb)
+{
+ unsigned long flags;
+
+ if (!ddb || ddb >= 0xFFFF)
+ return;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TYPE, DDB_TYPE_UNUSED);
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+ CLEAR_DDB(ddb, asd_ha);
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+}
+
+static inline void asd_set_ddb_type(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb = (int) (unsigned long) dev->lldd_dev;
+
+ if (dev->dev_type == SATA_PM_PORT)
+ asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT);
+ else if (dev->tproto)
+ asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET);
+ else
+ asd_ddbsite_write_byte(asd_ha,ddb,DDB_TYPE,DDB_TYPE_INITIATOR);
+}
+
+static int asd_init_sata_tag_ddb(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb, i;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ for (i = 0; i < sizeof(struct asd_ddb_sata_tag); i += 2)
+ asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+ asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+ SISTER_DDB, ddb);
+ return 0;
+}
+
+static inline int asd_init_sata(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb = (int) (unsigned long) dev->lldd_dev;
+ u32 qdepth = 0;
+ int res = 0;
+
+ asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+ if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) &&
+ dev->sata_dev.identify_device &&
+ dev->sata_dev.identify_device[10] != 0) {
+ u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]);
+ u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]);
+
+ if (w76 & 0x100) /* NCQ? */
+ qdepth = (w75 & 0x1F) + 1;
+ asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
+ (1<<qdepth)-1);
+ asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth);
+ }
+ if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
+ dev->dev_type == SATA_PM_PORT) {
+ struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
+ dev->frame_rcvd;
+ asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
+ }
+ asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF);
+ if (qdepth > 0)
+ res = asd_init_sata_tag_ddb(dev);
+ return res;
+}
+
+static int asd_init_target_ddb(struct domain_device *dev)
+{
+ int ddb, i;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ u8 flags = 0;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ dev->lldd_dev = (void *) (unsigned long) ddb;
+
+ asd_ddbsite_write_byte(asd_ha, ddb, 0, DDB_TP_CONN_TYPE);
+ asd_ddbsite_write_byte(asd_ha, ddb, 1, 0);
+ asd_ddbsite_write_word(asd_ha, ddb, INIT_CONN_TAG, 0xFFFF);
+ for (i = 0; i < SAS_ADDR_SIZE; i++)
+ asd_ddbsite_write_byte(asd_ha, ddb, DEST_SAS_ADDR+i,
+ dev->sas_addr[i]);
+ asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_HEAD, 0xFFFF);
+ asd_set_ddb_type(dev);
+ asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask);
+ if (dev->port->oob_mode != SATA_OOB_MODE) {
+ flags |= OPEN_REQUIRED;
+ if ((dev->dev_type == SATA_DEV) ||
+ (dev->tproto & SAS_PROTO_STP)) {
+ struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
+ if (rps_resp->frame_type == SMP_RESPONSE &&
+ rps_resp->function == SMP_REPORT_PHY_SATA &&
+ rps_resp->result == SMP_RESP_FUNC_ACC) {
+ if (rps_resp->rps.affil_valid)
+ flags |= STP_AFFIL_POL;
+ if (rps_resp->rps.affil_supp)
+ flags |= SUPPORTS_AFFIL;
+ }
+ } else {
+ flags |= CONCURRENT_CONN_SUPP;
+ if (!dev->parent &&
+ (dev->dev_type == EDGE_DEV ||
+ dev->dev_type == FANOUT_DEV))
+ asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+ 4);
+ else
+ asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+ dev->pathways);
+ asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1);
+ }
+ }
+ if (dev->dev_type == SATA_PM)
+ flags |= SATA_MULTIPORT;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
+
+ flags = 0;
+ if (dev->tproto & SAS_PROTO_STP)
+ flags |= STP_CL_POL_NO_TX;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags);
+
+ asd_ddbsite_write_word(asd_ha, ddb, EXEC_QUEUE_TAIL, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) {
+ i = asd_init_sata(dev);
+ if (i < 0) {
+ asd_free_ddb(asd_ha, ddb);
+ return i;
+ }
+ }
+
+ if (dev->dev_type == SAS_END_DEV) {
+ struct sas_end_device *rdev = rphy_to_end_device(dev->rphy);
+ if (rdev->I_T_nexus_loss_timeout > 0)
+ asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+ min(rdev->I_T_nexus_loss_timeout,
+ (u16)ITNL_TIMEOUT_CONST));
+ else
+ asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+ (u16)ITNL_TIMEOUT_CONST);
+ }
+ return 0;
+}
+
+static int asd_init_sata_pm_table_ddb(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb, i;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ for (i = 0; i < 32; i += 2)
+ asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+ asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+ SISTER_DDB, ddb);
+
+ return 0;
+}
+
+#define PM_PORT_FLAGS offsetof(struct asd_ddb_sata_pm_port, pm_port_flags)
+#define PARENT_DDB offsetof(struct asd_ddb_sata_pm_port, parent_ddb)
+
+/**
+ * asd_init_sata_pm_port_ddb -- SATA Port Multiplier Port
+ * dev: pointer to domain device
+ *
+ * For SATA Port Multiplier Ports we need to allocate one SATA Port
+ * Multiplier Port DDB and depending on whether the target on it
+ * supports SATA II NCQ, one SATA Tag DDB.
+ */
+static int asd_init_sata_pm_port_ddb(struct domain_device *dev)
+{
+ int ddb, i, parent_ddb, pmtable_ddb;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ u8 flags;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ asd_set_ddb_type(dev);
+ flags = (dev->sata_dev.port_no << 4) | PM_PORT_SET;
+ asd_ddbsite_write_byte(asd_ha, ddb, PM_PORT_FLAGS, flags);
+ asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+ asd_init_sata(dev);
+
+ parent_ddb = (int) (unsigned long) dev->parent->lldd_dev;
+ asd_ddbsite_write_word(asd_ha, ddb, PARENT_DDB, parent_ddb);
+ pmtable_ddb = asd_ddbsite_read_word(asd_ha, parent_ddb, SISTER_DDB);
+ asd_ddbsite_write_word(asd_ha, pmtable_ddb, dev->sata_dev.port_no,ddb);
+
+ if (asd_ddbsite_read_byte(asd_ha, ddb, NUM_SATA_TAGS) > 0) {
+ i = asd_init_sata_tag_ddb(dev);
+ if (i < 0) {
+ asd_free_ddb(asd_ha, ddb);
+ return i;
+ }
+ }
+ return 0;
+}
+
+static int asd_init_initiator_ddb(struct domain_device *dev)
+{
+ return -ENODEV;
+}
+
+/**
+ * asd_init_sata_pm_ddb -- SATA Port Multiplier
+ * dev: pointer to domain device
+ *
+ * For STP and direct-attached SATA Port Multipliers we need
+ * one target port DDB entry and one SATA PM table DDB entry.
+ */
+static int asd_init_sata_pm_ddb(struct domain_device *dev)
+{
+ int res = 0;
+
+ res = asd_init_target_ddb(dev);
+ if (res)
+ goto out;
+ res = asd_init_sata_pm_table_ddb(dev);
+ if (res)
+ asd_free_ddb(dev->port->ha->lldd_ha,
+ (int) (unsigned long) dev->lldd_dev);
+out:
+ return res;
+}
+
+int asd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+
+ switch (dev->dev_type) {
+ case SATA_PM:
+ res = asd_init_sata_pm_ddb(dev);
+ break;
+ case SATA_PM_PORT:
+ res = asd_init_sata_pm_port_ddb(dev);
+ break;
+ default:
+ if (dev->tproto)
+ res = asd_init_target_ddb(dev);
+ else
+ res = asd_init_initiator_ddb(dev);
+ }
+ return res;
+}
+
+void asd_dev_gone(struct domain_device *dev)
+{
+ int ddb, sister_ddb;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+
+ ddb = (int) (unsigned long) dev->lldd_dev;
+ sister_ddb = asd_ddbsite_read_word(asd_ha, ddb, SISTER_DDB);
+
+ if (sister_ddb != 0xFFFF)
+ asd_free_ddb(asd_ha, sister_ddb);
+ asd_free_ddb(asd_ha, ddb);
+ dev->lldd_dev = NULL;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
new file mode 100644
index 0000000..e6ade59
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -0,0 +1,959 @@
+/*
+ * Aic94xx SAS/SATA driver dump interface.
+ *
+ * Copyright (C) 2004 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * 2005/07/14/LT Complete overhaul of this file. Update pages, register
+ * locations, names, etc. Make use of macros. Print more information.
+ * Print all cseq and lseq mip and mdp.
+ *
+ */
+
+#include "linux/pci.h"
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_reg_def.h"
+#include "aic94xx_sas.h"
+
+#include "aic94xx_dump.h"
+
+#ifdef ASD_DEBUG
+
+#define MD(x) (1 << (x))
+#define MODE_COMMON (1 << 31)
+#define MODE_0_7 (0xFF)
+
+static const struct lseq_cio_regs {
+ char *name;
+ u32 offs;
+ u8 width;
+ u32 mode;
+} LSEQmCIOREGS[] = {
+ {"LmMnSCBPTR", 0x20, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+ {"LmMnDDBPTR", 0x22, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+ {"LmREQMBX", 0x30, 32, MODE_COMMON },
+ {"LmRSPMBX", 0x34, 32, MODE_COMMON },
+ {"LmMnINT", 0x38, 32, MODE_0_7 },
+ {"LmMnINTEN", 0x3C, 32, MODE_0_7 },
+ {"LmXMTPRIMD", 0x40, 32, MODE_COMMON },
+ {"LmXMTPRIMCS", 0x44, 8, MODE_COMMON },
+ {"LmCONSTAT", 0x45, 8, MODE_COMMON },
+ {"LmMnDMAERRS", 0x46, 8, MD(0)|MD(1) },
+ {"LmMnSGDMAERRS", 0x47, 8, MD(0)|MD(1) },
+ {"LmMnEXPHDRP", 0x48, 8, MD(0) },
+ {"LmMnSASAALIGN", 0x48, 8, MD(1) },
+ {"LmMnMSKHDRP", 0x49, 8, MD(0) },
+ {"LmMnSTPALIGN", 0x49, 8, MD(1) },
+ {"LmMnRCVHDRP", 0x4A, 8, MD(0) },
+ {"LmMnXMTHDRP", 0x4A, 8, MD(1) },
+ {"LmALIGNMODE", 0x4B, 8, MD(1) },
+ {"LmMnEXPRCVCNT", 0x4C, 32, MD(0) },
+ {"LmMnXMTCNT", 0x4C, 32, MD(1) },
+ {"LmMnCURRTAG", 0x54, 16, MD(0) },
+ {"LmMnPREVTAG", 0x56, 16, MD(0) },
+ {"LmMnACKOFS", 0x58, 8, MD(1) },
+ {"LmMnXFRLVL", 0x59, 8, MD(0)|MD(1) },
+ {"LmMnSGDMACTL", 0x5A, 8, MD(0)|MD(1) },
+ {"LmMnSGDMASTAT", 0x5B, 8, MD(0)|MD(1) },
+ {"LmMnDDMACTL", 0x5C, 8, MD(0)|MD(1) },
+ {"LmMnDDMASTAT", 0x5D, 8, MD(0)|MD(1) },
+ {"LmMnDDMAMODE", 0x5E, 16, MD(0)|MD(1) },
+ {"LmMnPIPECTL", 0x61, 8, MD(0)|MD(1) },
+ {"LmMnACTSCB", 0x62, 16, MD(0)|MD(1) },
+ {"LmMnSGBHADR", 0x64, 8, MD(0)|MD(1) },
+ {"LmMnSGBADR", 0x65, 8, MD(0)|MD(1) },
+ {"LmMnSGDCNT", 0x66, 8, MD(0)|MD(1) },
+ {"LmMnSGDMADR", 0x68, 32, MD(0)|MD(1) },
+ {"LmMnSGDMADR", 0x6C, 32, MD(0)|MD(1) },
+ {"LmMnXFRCNT", 0x70, 32, MD(0)|MD(1) },
+ {"LmMnXMTCRC", 0x74, 32, MD(1) },
+ {"LmCURRTAG", 0x74, 16, MD(0) },
+ {"LmPREVTAG", 0x76, 16, MD(0) },
+ {"LmMnDPSEL", 0x7B, 8, MD(0)|MD(1) },
+ {"LmDPTHSTAT", 0x7C, 8, MODE_COMMON },
+ {"LmMnHOLDLVL", 0x7D, 8, MD(0) },
+ {"LmMnSATAFS", 0x7E, 8, MD(1) },
+ {"LmMnCMPLTSTAT", 0x7F, 8, MD(0)|MD(1) },
+ {"LmPRMSTAT0", 0x80, 32, MODE_COMMON },
+ {"LmPRMSTAT1", 0x84, 32, MODE_COMMON },
+ {"LmGPRMINT", 0x88, 8, MODE_COMMON },
+ {"LmMnCURRSCB", 0x8A, 16, MD(0) },
+ {"LmPRMICODE", 0x8C, 32, MODE_COMMON },
+ {"LmMnRCVCNT", 0x90, 16, MD(0) },
+ {"LmMnBUFSTAT", 0x92, 16, MD(0) },
+ {"LmMnXMTHDRSIZE",0x92, 8, MD(1) },
+ {"LmMnXMTSIZE", 0x93, 8, MD(1) },
+ {"LmMnTGTXFRCNT", 0x94, 32, MD(0) },
+ {"LmMnEXPROFS", 0x98, 32, MD(0) },
+ {"LmMnXMTROFS", 0x98, 32, MD(1) },
+ {"LmMnRCVROFS", 0x9C, 32, MD(0) },
+ {"LmCONCTL", 0xA0, 16, MODE_COMMON },
+ {"LmBITLTIMER", 0xA2, 16, MODE_COMMON },
+ {"LmWWNLOW", 0xA8, 32, MODE_COMMON },
+ {"LmWWNHIGH", 0xAC, 32, MODE_COMMON },
+ {"LmMnFRMERR", 0xB0, 32, MD(0) },
+ {"LmMnFRMERREN", 0xB4, 32, MD(0) },
+ {"LmAWTIMER", 0xB8, 16, MODE_COMMON },
+ {"LmAWTCTL", 0xBA, 8, MODE_COMMON },
+ {"LmMnHDRCMPS", 0xC0, 32, MD(0) },
+ {"LmMnXMTSTAT", 0xC4, 8, MD(1) },
+ {"LmHWTSTATEN", 0xC5, 8, MODE_COMMON },
+ {"LmMnRRDYRC", 0xC6, 8, MD(0) },
+ {"LmMnRRDYTC", 0xC6, 8, MD(1) },
+ {"LmHWTSTAT", 0xC7, 8, MODE_COMMON },
+ {"LmMnDATABUFADR",0xC8, 16, MD(0)|MD(1) },
+ {"LmDWSSTATUS", 0xCB, 8, MODE_COMMON },
+ {"LmMnACTSTAT", 0xCE, 16, MD(0)|MD(1) },
+ {"LmMnREQSCB", 0xD2, 16, MD(0)|MD(1) },
+ {"LmXXXPRIM", 0xD4, 32, MODE_COMMON },
+ {"LmRCVASTAT", 0xD9, 8, MODE_COMMON },
+ {"LmINTDIS1", 0xDA, 8, MODE_COMMON },
+ {"LmPSTORESEL", 0xDB, 8, MODE_COMMON },
+ {"LmPSTORE", 0xDC, 32, MODE_COMMON },
+ {"LmPRIMSTAT0EN", 0xE0, 32, MODE_COMMON },
+ {"LmPRIMSTAT1EN", 0xE4, 32, MODE_COMMON },
+ {"LmDONETCTL", 0xF2, 16, MODE_COMMON },
+ {NULL, 0, 0, 0 }
+};
+/*
+static struct lseq_cio_regs LSEQmOOBREGS[] = {
+ {"OOB_BFLTR" ,0x100, 8, MD(5)},
+ {"OOB_INIT_MIN" ,0x102,16, MD(5)},
+ {"OOB_INIT_MAX" ,0x104,16, MD(5)},
+ {"OOB_INIT_NEG" ,0x106,16, MD(5)},
+ {"OOB_SAS_MIN" ,0x108,16, MD(5)},
+ {"OOB_SAS_MAX" ,0x10A,16, MD(5)},
+ {"OOB_SAS_NEG" ,0x10C,16, MD(5)},
+ {"OOB_WAKE_MIN" ,0x10E,16, MD(5)},
+ {"OOB_WAKE_MAX" ,0x110,16, MD(5)},
+ {"OOB_WAKE_NEG" ,0x112,16, MD(5)},
+ {"OOB_IDLE_MAX" ,0x114,16, MD(5)},
+ {"OOB_BURST_MAX" ,0x116,16, MD(5)},
+ {"OOB_XMIT_BURST" ,0x118, 8, MD(5)},
+ {"OOB_SEND_PAIRS" ,0x119, 8, MD(5)},
+ {"OOB_INIT_IDLE" ,0x11A, 8, MD(5)},
+ {"OOB_INIT_NEGO" ,0x11C, 8, MD(5)},
+ {"OOB_SAS_IDLE" ,0x11E, 8, MD(5)},
+ {"OOB_SAS_NEGO" ,0x120, 8, MD(5)},
+ {"OOB_WAKE_IDLE" ,0x122, 8, MD(5)},
+ {"OOB_WAKE_NEGO" ,0x124, 8, MD(5)},
+ {"OOB_DATA_KBITS" ,0x126, 8, MD(5)},
+ {"OOB_BURST_DATA" ,0x128,32, MD(5)},
+ {"OOB_ALIGN_0_DATA" ,0x12C,32, MD(5)},
+ {"OOB_ALIGN_1_DATA" ,0x130,32, MD(5)},
+ {"OOB_SYNC_DATA" ,0x134,32, MD(5)},
+ {"OOB_D10_2_DATA" ,0x138,32, MD(5)},
+ {"OOB_PHY_RST_CNT" ,0x13C,32, MD(5)},
+ {"OOB_SIG_GEN" ,0x140, 8, MD(5)},
+ {"OOB_XMIT" ,0x141, 8, MD(5)},
+ {"FUNCTION_MAKS" ,0x142, 8, MD(5)},
+ {"OOB_MODE" ,0x143, 8, MD(5)},
+ {"CURRENT_STATUS" ,0x144, 8, MD(5)},
+ {"SPEED_MASK" ,0x145, 8, MD(5)},
+ {"PRIM_COUNT" ,0x146, 8, MD(5)},
+ {"OOB_SIGNALS" ,0x148, 8, MD(5)},
+ {"OOB_DATA_DET" ,0x149, 8, MD(5)},
+ {"OOB_TIME_OUT" ,0x14C, 8, MD(5)},
+ {"OOB_TIMER_ENABLE" ,0x14D, 8, MD(5)},
+ {"OOB_STATUS" ,0x14E, 8, MD(5)},
+ {"HOT_PLUG_DELAY" ,0x150, 8, MD(5)},
+ {"RCD_DELAY" ,0x151, 8, MD(5)},
+ {"COMSAS_TIMER" ,0x152, 8, MD(5)},
+ {"SNTT_DELAY" ,0x153, 8, MD(5)},
+ {"SPD_CHNG_DELAY" ,0x154, 8, MD(5)},
+ {"SNLT_DELAY" ,0x155, 8, MD(5)},
+ {"SNWT_DELAY" ,0x156, 8, MD(5)},
+ {"ALIGN_DELAY" ,0x157, 8, MD(5)},
+ {"INT_ENABLE_0" ,0x158, 8, MD(5)},
+ {"INT_ENABLE_1" ,0x159, 8, MD(5)},
+ {"INT_ENABLE_2" ,0x15A, 8, MD(5)},
+ {"INT_ENABLE_3" ,0x15B, 8, MD(5)},
+ {"OOB_TEST_REG" ,0x15C, 8, MD(5)},
+ {"PHY_CONTROL_0" ,0x160, 8, MD(5)},
+ {"PHY_CONTROL_1" ,0x161, 8, MD(5)},
+ {"PHY_CONTROL_2" ,0x162, 8, MD(5)},
+ {"PHY_CONTROL_3" ,0x163, 8, MD(5)},
+ {"PHY_OOB_CAL_TX" ,0x164, 8, MD(5)},
+ {"PHY_OOB_CAL_RX" ,0x165, 8, MD(5)},
+ {"OOB_PHY_CAL_TX" ,0x166, 8, MD(5)},
+ {"OOB_PHY_CAL_RX" ,0x167, 8, MD(5)},
+ {"PHY_CONTROL_4" ,0x168, 8, MD(5)},
+ {"PHY_TEST" ,0x169, 8, MD(5)},
+ {"PHY_PWR_CTL" ,0x16A, 8, MD(5)},
+ {"PHY_PWR_DELAY" ,0x16B, 8, MD(5)},
+ {"OOB_SM_CON" ,0x16C, 8, MD(5)},
+ {"ADDR_TRAP_1" ,0x16D, 8, MD(5)},
+ {"ADDR_NEXT_1" ,0x16E, 8, MD(5)},
+ {"NEXT_ST_1" ,0x16F, 8, MD(5)},
+ {"OOB_SM_STATE" ,0x170, 8, MD(5)},
+ {"ADDR_TRAP_2" ,0x171, 8, MD(5)},
+ {"ADDR_NEXT_2" ,0x172, 8, MD(5)},
+ {"NEXT_ST_2" ,0x173, 8, MD(5)},
+ {NULL, 0, 0, 0 }
+};
+*/
+#define STR_8BIT " %30s[0x%04x]:0x%02x\n"
+#define STR_16BIT " %30s[0x%04x]:0x%04x\n"
+#define STR_32BIT " %30s[0x%04x]:0x%08x\n"
+#define STR_64BIT " %30s[0x%04x]:0x%llx\n"
+
+#define PRINT_REG_8bit(_ha, _n, _r) asd_printk(STR_8BIT, #_n, _n, \
+ asd_read_reg_byte(_ha, _r))
+#define PRINT_REG_16bit(_ha, _n, _r) asd_printk(STR_16BIT, #_n, _n, \
+ asd_read_reg_word(_ha, _r))
+#define PRINT_REG_32bit(_ha, _n, _r) asd_printk(STR_32BIT, #_n, _n, \
+ asd_read_reg_dword(_ha, _r))
+
+#define PRINT_CREG_8bit(_ha, _n) asd_printk(STR_8BIT, #_n, _n, \
+ asd_read_reg_byte(_ha, C##_n))
+#define PRINT_CREG_16bit(_ha, _n) asd_printk(STR_16BIT, #_n, _n, \
+ asd_read_reg_word(_ha, C##_n))
+#define PRINT_CREG_32bit(_ha, _n) asd_printk(STR_32BIT, #_n, _n, \
+ asd_read_reg_dword(_ha, C##_n))
+
+#define MSTR_8BIT " Mode:%02d %30s[0x%04x]:0x%02x\n"
+#define MSTR_16BIT " Mode:%02d %30s[0x%04x]:0x%04x\n"
+#define MSTR_32BIT " Mode:%02d %30s[0x%04x]:0x%08x\n"
+
+#define PRINT_MREG_8bit(_ha, _m, _n, _r) asd_printk(MSTR_8BIT, _m, #_n, _n, \
+ asd_read_reg_byte(_ha, _r))
+#define PRINT_MREG_16bit(_ha, _m, _n, _r) asd_printk(MSTR_16BIT, _m, #_n, _n, \
+ asd_read_reg_word(_ha, _r))
+#define PRINT_MREG_32bit(_ha, _m, _n, _r) asd_printk(MSTR_32BIT, _m, #_n, _n, \
+ asd_read_reg_dword(_ha, _r))
+
+/* can also be used for MD when the register is mode aware already */
+#define PRINT_MIS_byte(_ha, _n) asd_printk(STR_8BIT, #_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_byte(_ha, CSEQ_##_n))
+#define PRINT_MIS_word(_ha, _n) asd_printk(STR_16BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_word(_ha, CSEQ_##_n))
+#define PRINT_MIS_dword(_ha, _n) \
+ asd_printk(STR_32BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_dword(_ha, CSEQ_##_n))
+#define PRINT_MIS_qword(_ha, _n) \
+ asd_printk(STR_64BIT, #_n,CSEQ_##_n-CMAPPEDSCR, \
+ (unsigned long long)(((u64)asd_read_reg_dword(_ha, CSEQ_##_n)) \
+ | (((u64)asd_read_reg_dword(_ha, (CSEQ_##_n)+4))<<32)))
+
+#define CMDP_REG(_n, _m) (_m*(CSEQ_PAGE_SIZE*2)+CSEQ_##_n)
+#define PRINT_CMDP_word(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+ #_n, \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 0)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 1)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 2)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 3)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 4)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 5)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 6)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 7)))
+
+#define PRINT_CMDP_byte(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+ #_n, \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 0)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 1)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 2)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 3)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 4)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 5)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 6)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 7)))
+
+static void asd_dump_cseq_state(struct asd_ha_struct *asd_ha)
+{
+ int mode;
+
+ asd_printk("CSEQ STATE\n");
+
+ asd_printk("ARP2 REGISTERS\n");
+
+ PRINT_CREG_32bit(asd_ha, ARP2CTL);
+ PRINT_CREG_32bit(asd_ha, ARP2INT);
+ PRINT_CREG_32bit(asd_ha, ARP2INTEN);
+ PRINT_CREG_8bit(asd_ha, MODEPTR);
+ PRINT_CREG_8bit(asd_ha, ALTMODE);
+ PRINT_CREG_8bit(asd_ha, FLAG);
+ PRINT_CREG_8bit(asd_ha, ARP2INTCTL);
+ PRINT_CREG_16bit(asd_ha, STACK);
+ PRINT_CREG_16bit(asd_ha, PRGMCNT);
+ PRINT_CREG_16bit(asd_ha, ACCUM);
+ PRINT_CREG_16bit(asd_ha, SINDEX);
+ PRINT_CREG_16bit(asd_ha, DINDEX);
+ PRINT_CREG_8bit(asd_ha, SINDIR);
+ PRINT_CREG_8bit(asd_ha, DINDIR);
+ PRINT_CREG_8bit(asd_ha, JUMLDIR);
+ PRINT_CREG_8bit(asd_ha, ARP2HALTCODE);
+ PRINT_CREG_16bit(asd_ha, CURRADDR);
+ PRINT_CREG_16bit(asd_ha, LASTADDR);
+ PRINT_CREG_16bit(asd_ha, NXTLADDR);
+
+ asd_printk("IOP REGISTERS\n");
+
+ PRINT_REG_32bit(asd_ha, BISTCTL1, CBISTCTL);
+ PRINT_CREG_32bit(asd_ha, MAPPEDSCR);
+
+ asd_printk("CIO REGISTERS\n");
+
+ for (mode = 0; mode < 9; mode++)
+ PRINT_MREG_16bit(asd_ha, mode, MnSCBPTR, CMnSCBPTR(mode));
+ PRINT_MREG_16bit(asd_ha, 15, MnSCBPTR, CMnSCBPTR(15));
+
+ for (mode = 0; mode < 9; mode++)
+ PRINT_MREG_16bit(asd_ha, mode, MnDDBPTR, CMnDDBPTR(mode));
+ PRINT_MREG_16bit(asd_ha, 15, MnDDBPTR, CMnDDBPTR(15));
+
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnREQMBX, CMnREQMBX(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnRSPMBX, CMnRSPMBX(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnINT, CMnINT(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnINTEN, CMnINTEN(mode));
+
+ PRINT_CREG_8bit(asd_ha, SCRATCHPAGE);
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_8bit(asd_ha, mode, MnSCRATCHPAGE,
+ CMnSCRATCHPAGE(mode));
+
+ PRINT_REG_32bit(asd_ha, CLINKCON, CLINKCON);
+ PRINT_REG_8bit(asd_ha, CCONMSK, CCONMSK);
+ PRINT_REG_8bit(asd_ha, CCONEXIST, CCONEXIST);
+ PRINT_REG_16bit(asd_ha, CCONMODE, CCONMODE);
+ PRINT_REG_32bit(asd_ha, CTIMERCALC, CTIMERCALC);
+ PRINT_REG_8bit(asd_ha, CINTDIS, CINTDIS);
+
+ asd_printk("SCRATCH MEMORY\n");
+
+ asd_printk("MIP 4 >>>>>\n");
+ PRINT_MIS_word(asd_ha, Q_EXE_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EXE_TAIL);
+ PRINT_MIS_word(asd_ha, Q_DONE_HEAD);
+ PRINT_MIS_word(asd_ha, Q_DONE_TAIL);
+ PRINT_MIS_word(asd_ha, Q_SEND_HEAD);
+ PRINT_MIS_word(asd_ha, Q_SEND_TAIL);
+ PRINT_MIS_word(asd_ha, Q_DMA2CHIM_HEAD);
+ PRINT_MIS_word(asd_ha, Q_DMA2CHIM_TAIL);
+ PRINT_MIS_word(asd_ha, Q_COPY_HEAD);
+ PRINT_MIS_word(asd_ha, Q_COPY_TAIL);
+ PRINT_MIS_word(asd_ha, REG0);
+ PRINT_MIS_word(asd_ha, REG1);
+ PRINT_MIS_dword(asd_ha, REG2);
+ PRINT_MIS_byte(asd_ha, LINK_CTL_Q_MAP);
+ PRINT_MIS_byte(asd_ha, MAX_CSEQ_MODE);
+ PRINT_MIS_byte(asd_ha, FREE_LIST_HACK_COUNT);
+
+ asd_printk("MIP 5 >>>>\n");
+ PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_QUEUE);
+ PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_COUNT);
+ PRINT_MIS_word(asd_ha, Q_EST_NEXUS_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EST_NEXUS_TAIL);
+ PRINT_MIS_word(asd_ha, NEED_EST_NEXUS_SCB);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_HEAD);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_TAIL);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_SCB_OFFSET);
+
+ asd_printk("MIP 6 >>>>\n");
+ PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR0);
+ PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR1);
+ PRINT_MIS_word(asd_ha, INT_ROUT_SCBPTR);
+ PRINT_MIS_byte(asd_ha, INT_ROUT_MODE);
+ PRINT_MIS_byte(asd_ha, ISR_SCRATCH_FLAGS);
+ PRINT_MIS_word(asd_ha, ISR_SAVE_SINDEX);
+ PRINT_MIS_word(asd_ha, ISR_SAVE_DINDEX);
+ PRINT_MIS_word(asd_ha, Q_MONIRTT_HEAD);
+ PRINT_MIS_word(asd_ha, Q_MONIRTT_TAIL);
+ PRINT_MIS_byte(asd_ha, FREE_SCB_MASK);
+ PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_HEAD);
+ PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_TAIL);
+ PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_HEAD);
+ PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_TAIL);
+
+ asd_printk("MIP 7 >>>>\n");
+ PRINT_MIS_qword(asd_ha, EMPTY_REQ_QUEUE);
+ PRINT_MIS_qword(asd_ha, EMPTY_REQ_COUNT);
+ PRINT_MIS_word(asd_ha, Q_EMPTY_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EMPTY_TAIL);
+ PRINT_MIS_word(asd_ha, NEED_EMPTY_SCB);
+ PRINT_MIS_byte(asd_ha, EMPTY_REQ_HEAD);
+ PRINT_MIS_byte(asd_ha, EMPTY_REQ_TAIL);
+ PRINT_MIS_byte(asd_ha, EMPTY_SCB_OFFSET);
+ PRINT_MIS_word(asd_ha, PRIMITIVE_DATA);
+ PRINT_MIS_dword(asd_ha, TIMEOUT_CONST);
+
+ asd_printk("MDP 0 >>>>\n");
+ asd_printk("%-20s %6s %6s %6s %6s %6s %6s %6s %6s\n",
+ "Mode: ", "0", "1", "2", "3", "4", "5", "6", "7");
+ PRINT_CMDP_word(asd_ha, LRM_SAVE_SINDEX);
+ PRINT_CMDP_word(asd_ha, LRM_SAVE_SCBPTR);
+ PRINT_CMDP_word(asd_ha, Q_LINK_HEAD);
+ PRINT_CMDP_word(asd_ha, Q_LINK_TAIL);
+ PRINT_CMDP_byte(asd_ha, LRM_SAVE_SCRPAGE);
+
+ asd_printk("MDP 0 Mode 8 >>>>\n");
+ PRINT_MIS_word(asd_ha, RET_ADDR);
+ PRINT_MIS_word(asd_ha, RET_SCBPTR);
+ PRINT_MIS_word(asd_ha, SAVE_SCBPTR);
+ PRINT_MIS_word(asd_ha, EMPTY_TRANS_CTX);
+ PRINT_MIS_word(asd_ha, RESP_LEN);
+ PRINT_MIS_word(asd_ha, TMF_SCBPTR);
+ PRINT_MIS_word(asd_ha, GLOBAL_PREV_SCB);
+ PRINT_MIS_word(asd_ha, GLOBAL_HEAD);
+ PRINT_MIS_word(asd_ha, CLEAR_LU_HEAD);
+ PRINT_MIS_byte(asd_ha, TMF_OPCODE);
+ PRINT_MIS_byte(asd_ha, SCRATCH_FLAGS);
+ PRINT_MIS_word(asd_ha, HSB_SITE);
+ PRINT_MIS_word(asd_ha, FIRST_INV_SCB_SITE);
+ PRINT_MIS_word(asd_ha, FIRST_INV_DDB_SITE);
+
+ asd_printk("MDP 1 Mode 8 >>>>\n");
+ PRINT_MIS_qword(asd_ha, LUN_TO_CLEAR);
+ PRINT_MIS_qword(asd_ha, LUN_TO_CHECK);
+
+ asd_printk("MDP 2 Mode 8 >>>>\n");
+ PRINT_MIS_qword(asd_ha, HQ_NEW_POINTER);
+ PRINT_MIS_qword(asd_ha, HQ_DONE_BASE);
+ PRINT_MIS_dword(asd_ha, HQ_DONE_POINTER);
+ PRINT_MIS_byte(asd_ha, HQ_DONE_PASS);
+}
+
+#define PRINT_LREG_8bit(_h, _lseq, _n) \
+ asd_printk(STR_8BIT, #_n, _n, asd_read_reg_byte(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_16bit(_h, _lseq, _n) \
+ asd_printk(STR_16BIT, #_n, _n, asd_read_reg_word(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_32bit(_h, _lseq, _n) \
+ asd_printk(STR_32BIT, #_n, _n, asd_read_reg_dword(_h, Lm##_n(_lseq)))
+
+#define PRINT_LMIP_byte(_h, _lseq, _n) \
+ asd_printk(STR_8BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_byte(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_word(_h, _lseq, _n) \
+ asd_printk(STR_16BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_word(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_dword(_h, _lseq, _n) \
+ asd_printk(STR_32BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_qword(_h, _lseq, _n) \
+ asd_printk(STR_64BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ (unsigned long long)(((unsigned long long) \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq))) \
+ | (((unsigned long long) \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)+4))<<32)))
+
+static void asd_print_lseq_cio_reg(struct asd_ha_struct *asd_ha,
+ u32 lseq_cio_addr, int i)
+{
+ switch (LSEQmCIOREGS[i].width) {
+ case 8:
+ asd_printk("%20s[0x%x]: 0x%02x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_byte(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+
+ break;
+ case 16:
+ asd_printk("%20s[0x%x]: 0x%04x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_word(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+
+ break;
+ case 32:
+ asd_printk("%20s[0x%x]: 0x%08x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_dword(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+ break;
+ }
+}
+
+static void asd_dump_lseq_state(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 moffs;
+ int mode;
+
+ asd_printk("LSEQ %d STATE\n", lseq);
+
+ asd_printk("LSEQ%d: ARP2 REGISTERS\n", lseq);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2CTL);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2INT);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2INTEN);
+ PRINT_LREG_8bit(asd_ha, lseq, MODEPTR);
+ PRINT_LREG_8bit(asd_ha, lseq, ALTMODE);
+ PRINT_LREG_8bit(asd_ha, lseq, FLAG);
+ PRINT_LREG_8bit(asd_ha, lseq, ARP2INTCTL);
+ PRINT_LREG_16bit(asd_ha, lseq, STACK);
+ PRINT_LREG_16bit(asd_ha, lseq, PRGMCNT);
+ PRINT_LREG_16bit(asd_ha, lseq, ACCUM);
+ PRINT_LREG_16bit(asd_ha, lseq, SINDEX);
+ PRINT_LREG_16bit(asd_ha, lseq, DINDEX);
+ PRINT_LREG_8bit(asd_ha, lseq, SINDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, DINDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, JUMLDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, ARP2HALTCODE);
+ PRINT_LREG_16bit(asd_ha, lseq, CURRADDR);
+ PRINT_LREG_16bit(asd_ha, lseq, LASTADDR);
+ PRINT_LREG_16bit(asd_ha, lseq, NXTLADDR);
+
+ asd_printk("LSEQ%d: IOP REGISTERS\n", lseq);
+
+ PRINT_LREG_32bit(asd_ha, lseq, MODECTL);
+ PRINT_LREG_32bit(asd_ha, lseq, DBGMODE);
+ PRINT_LREG_32bit(asd_ha, lseq, CONTROL);
+ PRINT_REG_32bit(asd_ha, BISTCTL0, LmBISTCTL0(lseq));
+ PRINT_REG_32bit(asd_ha, BISTCTL1, LmBISTCTL1(lseq));
+
+ asd_printk("LSEQ%d: CIO REGISTERS\n", lseq);
+ asd_printk("Mode common:\n");
+
+ for (mode = 0; mode < 8; mode++) {
+ u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+ int i;
+
+ for (i = 0; LSEQmCIOREGS[i].name; i++)
+ if (LSEQmCIOREGS[i].mode == MODE_COMMON)
+ asd_print_lseq_cio_reg(asd_ha,lseq_cio_addr,i);
+ }
+
+ asd_printk("Mode unique:\n");
+ for (mode = 0; mode < 8; mode++) {
+ u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+ int i;
+
+ asd_printk("Mode %d\n", mode);
+ for (i = 0; LSEQmCIOREGS[i].name; i++) {
+ if (!(LSEQmCIOREGS[i].mode & (1 << mode)))
+ continue;
+ asd_print_lseq_cio_reg(asd_ha, lseq_cio_addr, i);
+ }
+ }
+
+ asd_printk("SCRATCH MEMORY\n");
+
+ asd_printk("LSEQ%d MIP 0 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_HEAD);
+ PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_NUMBER);
+ PRINT_LMIP_byte(asd_ha, lseq, SCRATCH_FLAGS);
+ PRINT_LMIP_qword(asd_ha, lseq, CONNECTION_STATE);
+ PRINT_LMIP_word(asd_ha, lseq, CONCTL);
+ PRINT_LMIP_byte(asd_ha, lseq, CONSTAT);
+ PRINT_LMIP_byte(asd_ha, lseq, CONNECTION_MODES);
+ PRINT_LMIP_word(asd_ha, lseq, REG1_ISR);
+ PRINT_LMIP_word(asd_ha, lseq, REG2_ISR);
+ PRINT_LMIP_word(asd_ha, lseq, REG3_ISR);
+ PRINT_LMIP_qword(asd_ha, lseq,REG0_ISR);
+
+ asd_printk("LSEQ%d MIP 1 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR0);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR1);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR2);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR3);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE0);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE1);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE2);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE3);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_BUF_AVAIL);
+ PRINT_LMIP_dword(asd_ha, lseq, TIMEOUT_CONST);
+ PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_SINDEX);
+ PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_DINDEX);
+
+ asd_printk("LSEQ%d MIP 2 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR0);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR1);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR2);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR3);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD0);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD1);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD2);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD3);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_BUFS_AVAIL);
+
+ asd_printk("LSEQ%d MIP 3 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TMR_TOUT_CONST);
+ PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, SRST_ASSERT_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, ONE_MILLISEC_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, TEN_MS_COMINIT_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMEOUT);
+
+ for (mode = 0; mode < 3; mode++) {
+ asd_printk("LSEQ%d MDP 0 MODE %d >>>>\n", lseq, mode);
+ moffs = mode * LSEQ_MODE_SCRATCH_SIZE;
+
+ asd_printk(STR_16BIT, "RET_ADDR", 0,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "REG0_MODE", 2,
+ asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+ asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)
+ + moffs));
+ asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+ asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+ asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)
+ + moffs));
+ }
+
+ asd_printk("LSEQ%d MDP 0 MODE 5 >>>>\n", lseq);
+ moffs = LSEQ_MODE5_PAGE0_OFFSET;
+ asd_printk(STR_16BIT, "RET_ADDR", 0,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq) + moffs));
+ asd_printk(STR_16BIT, "REG0_MODE", 2,
+ asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq) + moffs));
+ asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+ asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq) + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq) + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq) + moffs));
+ asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+ asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq) + moffs));
+ asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+ asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq) + moffs));
+
+ asd_printk("LSEQ%d MDP 0 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_DDB_SITE);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_TRANS_CTX);
+ PRINT_LMIP_word(asd_ha, lseq, RESP_LEN);
+ PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_SCB_SITE);
+ PRINT_LMIP_dword(asd_ha, lseq, INTEN_SAVE);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_FRM_LEN);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_PROTOCOL);
+ PRINT_LMIP_byte(asd_ha, lseq, RESP_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, LAST_LOADED_SGE);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVE_SCBPTR);
+
+ asd_printk("LSEQ%d MDP 0 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, Q_XMIT_HEAD);
+ PRINT_LMIP_word(asd_ha, lseq, M1_EMPTY_TRANS_CTX);
+ PRINT_LMIP_word(asd_ha, lseq, INI_CONN_TAG);
+ PRINT_LMIP_byte(asd_ha, lseq, FAILED_OPEN_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, XMIT_REQUEST_TYPE);
+ PRINT_LMIP_byte(asd_ha, lseq, M1_RESP_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, M1_LAST_LOADED_SGE);
+ PRINT_LMIP_word(asd_ha, lseq, M1_SAVE_SCBPTR);
+
+ asd_printk("LSEQ%d MDP 0 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, PORT_COUNTER);
+ PRINT_LMIP_word(asd_ha, lseq, PM_TABLE_PTR);
+ PRINT_LMIP_word(asd_ha, lseq, SATA_INTERLOCK_TMR_SAVE);
+ PRINT_LMIP_word(asd_ha, lseq, IP_BITL);
+ PRINT_LMIP_word(asd_ha, lseq, COPY_SMP_CONN_TAG);
+ PRINT_LMIP_byte(asd_ha, lseq, P0M2_OFFS1AH);
+
+ asd_printk("LSEQ%d MDP 0 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_MODE);
+ PRINT_LMIP_word(asd_ha, lseq, Q_LINK_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_ERR);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_SIGNALS);
+ PRINT_LMIP_byte(asd_ha, lseq, SAS_RESET_MODE);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RESET_RETRY_COUNT);
+ PRINT_LMIP_byte(asd_ha, lseq, NUM_LINK_RESET_RETRIES);
+ PRINT_LMIP_word(asd_ha, lseq, OOB_INT_ENABLES);
+ PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_TIMEOUT);
+ PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_DOWN_COUNT);
+
+ asd_printk("LSEQ%d MDP 1 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR0);
+ PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR1);
+
+ asd_printk("LSEQ%d MDP 1 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR0);
+ PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR1);
+
+ asd_printk("LSEQ%d MDP 1 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, INVALID_DWORD_COUNT);
+ PRINT_LMIP_dword(asd_ha, lseq, DISPARITY_ERROR_COUNT);
+ PRINT_LMIP_dword(asd_ha, lseq, LOSS_OF_SYNC_COUNT);
+
+ asd_printk("LSEQ%d MDP 1 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, FRAME_TYPE_MASK);
+ PRINT_LMIP_dword(asd_ha, lseq, HASHED_SRC_ADDR_MASK_PRINT);
+ PRINT_LMIP_byte(asd_ha, lseq, NUM_FILL_BYTES_MASK);
+ PRINT_LMIP_word(asd_ha, lseq, TAG_MASK);
+ PRINT_LMIP_word(asd_ha, lseq, TARGET_PORT_XFER_TAG);
+ PRINT_LMIP_dword(asd_ha, lseq, DATA_OFFSET);
+
+ asd_printk("LSEQ%d MDP 2 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMER_TERM_TS);
+ PRINT_LMIP_byte(asd_ha, lseq, DEVICE_BITS);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_DDB);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_NUM_TAGS);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_CURR_TAG);
+
+ asd_printk("LSEQ%d MDP 2 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, TX_ID_ADDR_FRAME);
+ PRINT_LMIP_dword(asd_ha, lseq, OPEN_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, SRST_AS_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, LAST_LOADED_SG_EL);
+
+ asd_printk("LSEQ%d MDP 2 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, CLOSE_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, BREAK_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, DWS_RESET_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, MCTL_TIMER_TERM_TS);
+
+ asd_printk("LSEQ%d MDP 2 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, COMINIT_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_ID_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TIMER_TERM_TS);
+}
+
+/**
+ * asd_dump_ddb_site -- dump a CSEQ DDB site
+ * @asd_ha: pointer to host adapter structure
+ * @site_no: site number of interest
+ */
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+ if (site_no >= asd_ha->hw_prof.max_ddbs)
+ return;
+
+#define DDB_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+#define DDB2_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, site_no, \
+ offsetof(struct asd_ddb_stp_sata_target_port, __name))
+#define DDB_FIELDW(__name) \
+ asd_ddbsite_read_word(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+#define DDB_FIELDD(__name) \
+ asd_ddbsite_read_dword(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+ asd_printk("DDB: 0x%02x\n", site_no);
+ asd_printk("conn_type: 0x%02x\n", DDB_FIELDB(conn_type));
+ asd_printk("conn_rate: 0x%02x\n", DDB_FIELDB(conn_rate));
+ asd_printk("init_conn_tag: 0x%04x\n", be16_to_cpu(DDB_FIELDW(init_conn_tag)));
+ asd_printk("send_queue_head: 0x%04x\n", be16_to_cpu(DDB_FIELDW(send_queue_head)));
+ asd_printk("sq_suspended: 0x%02x\n", DDB_FIELDB(sq_suspended));
+ asd_printk("DDB Type: 0x%02x\n", DDB_FIELDB(ddb_type));
+ asd_printk("AWT Default: 0x%04x\n", DDB_FIELDW(awt_def));
+ asd_printk("compat_features: 0x%02x\n", DDB_FIELDB(compat_features));
+ asd_printk("Pathway Blocked Count: 0x%02x\n",
+ DDB_FIELDB(pathway_blocked_count));
+ asd_printk("arb_wait_time: 0x%04x\n", DDB_FIELDW(arb_wait_time));
+ asd_printk("more_compat_features: 0x%08x\n",
+ DDB_FIELDD(more_compat_features));
+ asd_printk("Conn Mask: 0x%02x\n", DDB_FIELDB(conn_mask));
+ asd_printk("flags: 0x%02x\n", DDB_FIELDB(flags));
+ asd_printk("flags2: 0x%02x\n", DDB2_FIELDB(flags2));
+ asd_printk("ExecQ Tail: 0x%04x\n",DDB_FIELDW(exec_queue_tail));
+ asd_printk("SendQ Tail: 0x%04x\n",DDB_FIELDW(send_queue_tail));
+ asd_printk("Active Task Count: 0x%04x\n",
+ DDB_FIELDW(active_task_count));
+ asd_printk("ITNL Reason: 0x%02x\n", DDB_FIELDB(itnl_reason));
+ asd_printk("ITNL Timeout Const: 0x%04x\n", DDB_FIELDW(itnl_timeout));
+ asd_printk("ITNL timestamp: 0x%08x\n", DDB_FIELDD(itnl_timestamp));
+}
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha)
+{
+#define DDB0_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name))
+#define DDB0_FIELDW(__name) \
+ asd_ddbsite_read_word(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDD(__name) \
+ asd_ddbsite_read_dword(asd_ha,0 , \
+ offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDA(__name, _o) \
+ asd_ddbsite_read_byte(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name)+_o)
+
+
+ asd_printk("DDB: 0\n");
+ asd_printk("q_free_ddb_head:%04x\n", DDB0_FIELDW(q_free_ddb_head));
+ asd_printk("q_free_ddb_tail:%04x\n", DDB0_FIELDW(q_free_ddb_tail));
+ asd_printk("q_free_ddb_cnt:%04x\n", DDB0_FIELDW(q_free_ddb_cnt));
+ asd_printk("q_used_ddb_head:%04x\n", DDB0_FIELDW(q_used_ddb_head));
+ asd_printk("q_used_ddb_tail:%04x\n", DDB0_FIELDW(q_used_ddb_tail));
+ asd_printk("shared_mem_lock:%04x\n", DDB0_FIELDW(shared_mem_lock));
+ asd_printk("smp_conn_tag:%04x\n", DDB0_FIELDW(smp_conn_tag));
+ asd_printk("est_nexus_buf_cnt:%04x\n", DDB0_FIELDW(est_nexus_buf_cnt));
+ asd_printk("est_nexus_buf_thresh:%04x\n",
+ DDB0_FIELDW(est_nexus_buf_thresh));
+ asd_printk("conn_not_active:%02x\n", DDB0_FIELDB(conn_not_active));
+ asd_printk("phy_is_up:%02x\n", DDB0_FIELDB(phy_is_up));
+ asd_printk("port_map_by_links:%02x %02x %02x %02x "
+ "%02x %02x %02x %02x\n",
+ DDB0_FIELDA(port_map_by_links, 0),
+ DDB0_FIELDA(port_map_by_links, 1),
+ DDB0_FIELDA(port_map_by_links, 2),
+ DDB0_FIELDA(port_map_by_links, 3),
+ DDB0_FIELDA(port_map_by_links, 4),
+ DDB0_FIELDA(port_map_by_links, 5),
+ DDB0_FIELDA(port_map_by_links, 6),
+ DDB0_FIELDA(port_map_by_links, 7));
+}
+
+static void asd_dump_scb_site(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+
+#define SCB_FIELDB(__name) \
+ asd_scbsite_read_byte(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDW(__name) \
+ asd_scbsite_read_word(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDD(__name) \
+ asd_scbsite_read_dword(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+
+ asd_printk("Total Xfer Len: 0x%08x.\n", SCB_FIELDD(total_xfer_len));
+ asd_printk("Frame Type: 0x%02x.\n", SCB_FIELDB(ssp_frame.frame_type));
+ asd_printk("Tag: 0x%04x.\n", SCB_FIELDW(ssp_frame.tag));
+ asd_printk("Target Port Xfer Tag: 0x%04x.\n",
+ SCB_FIELDW(ssp_frame.tptt));
+ asd_printk("Data Offset: 0x%08x.\n", SCB_FIELDW(ssp_frame.data_offs));
+ asd_printk("Retry Count: 0x%02x.\n", SCB_FIELDB(retry_count));
+}
+
+/**
+ * asd_dump_scb_sites -- dump currently used CSEQ SCB sites
+ * @asd_ha: pointer to host adapter struct
+ */
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha)
+{
+ u16 site_no;
+
+ for (site_no = 0; site_no < asd_ha->hw_prof.max_scbs; site_no++) {
+ u8 opcode;
+
+ if (!SCB_SITE_VALID(site_no))
+ continue;
+
+ /* We are only interested in SCB sites currently used.
+ */
+ opcode = asd_scbsite_read_byte(asd_ha, site_no,
+ offsetof(struct scb_header,
+ opcode));
+ if (opcode == 0xFF)
+ continue;
+
+ asd_printk("\nSCB: 0x%x\n", site_no);
+ asd_dump_scb_site(asd_ha, site_no);
+ }
+}
+
+/**
+ * ads_dump_seq_state -- dump CSEQ and LSEQ states
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of LSEQs of interest
+ */
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+
+ asd_dump_cseq_state(asd_ha);
+
+ if (lseq_mask != 0)
+ for_each_sequencer(lseq_mask, lseq_mask, lseq)
+ asd_dump_lseq_state(asd_ha, lseq);
+}
+
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl)
+{
+ unsigned long flags;
+ int i;
+
+ switch ((dl->status_block[1] & 0x70) >> 3) {
+ case SAS_PROTO_STP:
+ ASD_DPRINTK("STP proto device-to-host FIS:\n");
+ break;
+ default:
+ case SAS_PROTO_SSP:
+ ASD_DPRINTK("SAS proto IDENTIFY:\n");
+ break;
+ }
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ for (i = 0; i < phy->sas_phy.frame_rcvd_size; i+=4)
+ ASD_DPRINTK("%02x: %02x %02x %02x %02x\n",
+ i,
+ phy->frame_rcvd[i],
+ phy->frame_rcvd[i+1],
+ phy->frame_rcvd[i+2],
+ phy->frame_rcvd[i+3]);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+}
+
+static inline void asd_dump_scb(struct asd_ascb *ascb, int ind)
+{
+ asd_printk("scb%d: vaddr: 0x%p, dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ind, ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+}
+
+void asd_dump_scb_list(struct asd_ascb *ascb, int num)
+{
+ int i = 0;
+
+ asd_printk("dumping %d scbs:\n", num);
+
+ asd_dump_scb(ascb, i++);
+ --num;
+
+ if (num > 0 && !list_empty(&ascb->list)) {
+ struct list_head *el;
+
+ list_for_each(el, &ascb->list) {
+ struct asd_ascb *s = list_entry(el, struct asd_ascb,
+ list);
+ asd_dump_scb(s, i++);
+ if (--num <= 0)
+ break;
+ }
+ }
+}
+
+#endif /* ASD_DEBUG */
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.h b/drivers/scsi/aic94xx/aic94xx_dump.h
new file mode 100644
index 0000000..0c388e7
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_dump.h
@@ -0,0 +1,52 @@
+/*
+ * Aic94xx SAS/SATA driver dump header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_DUMP_H_
+#define _AIC94XX_DUMP_H_
+
+#ifdef ASD_DEBUG
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha);
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no);
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha);
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl);
+void asd_dump_scb_list(struct asd_ascb *ascb, int num);
+#else /* ASD_DEBUG */
+
+static inline void asd_dump_ddb_0(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_target_ddb(struct asd_ha_struct *asd_ha,
+ u16 site_no) { }
+static inline void asd_dump_scb_sites(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_seq_state(struct asd_ha_struct *asd_ha,
+ u8 lseq_mask) { }
+static inline void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl) { }
+static inline void asd_dump_scb_list(struct asd_ascb *ascb, int num) { }
+#endif /* ASD_DEBUG */
+
+#endif /* _AIC94XX_DUMP_H_ */
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
new file mode 100644
index 0000000..a242013
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -0,0 +1,1376 @@
+/*
+ * Aic94xx SAS/SATA driver hardware interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+u32 MBAR0_SWB_SIZE;
+
+/* ---------- Initialization ---------- */
+
+static void asd_get_user_sas_addr(struct asd_ha_struct *asd_ha)
+{
+ extern char sas_addr_str[];
+ /* If the user has specified a WWN it overrides other settings
+ */
+ if (sas_addr_str[0] != '\0')
+ asd_destringify_sas_addr(asd_ha->hw_prof.sas_addr,
+ sas_addr_str);
+ else if (asd_ha->hw_prof.sas_addr[0] != 0)
+ asd_stringify_sas_addr(sas_addr_str, asd_ha->hw_prof.sas_addr);
+}
+
+static void asd_propagate_sas_addr(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ if (asd_ha->hw_prof.phy_desc[i].sas_addr[0] == 0)
+ continue;
+ /* Set a phy's address only if it has none.
+ */
+ ASD_DPRINTK("setting phy%d addr to %llx\n", i,
+ SAS_ADDR(asd_ha->hw_prof.sas_addr));
+ memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr,
+ asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+/* ---------- PHY initialization ---------- */
+
+static void asd_init_phy_identify(struct asd_phy *phy)
+{
+ phy->identify_frame = phy->id_frm_tok->vaddr;
+
+ memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
+
+ phy->identify_frame->dev_type = SAS_END_DEV;
+ if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
+ phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
+ if (phy->sas_phy.role & PHY_ROLE_TARGET)
+ phy->identify_frame->target_bits = phy->sas_phy.tproto;
+ memcpy(phy->identify_frame->sas_addr, phy->phy_desc->sas_addr,
+ SAS_ADDR_SIZE);
+ phy->identify_frame->phy_id = phy->sas_phy.id;
+}
+
+static int asd_init_phy(struct asd_phy *phy)
+{
+ struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ sas_phy->enabled = 1;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTO_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ phy->id_frm_tok = asd_alloc_coherent(asd_ha,
+ sizeof(*phy->identify_frame),
+ GFP_KERNEL);
+ if (!phy->id_frm_tok) {
+ asd_printk("no mem for IDENTIFY for phy%d\n", sas_phy->id);
+ return -ENOMEM;
+ } else
+ asd_init_phy_identify(phy);
+
+ memset(phy->frame_rcvd, 0, sizeof(phy->frame_rcvd));
+
+ return 0;
+}
+
+static int asd_init_phys(struct asd_ha_struct *asd_ha)
+{
+ u8 i;
+ u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_phy *phy = &asd_ha->phys[i];
+
+ phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
+
+ phy->sas_phy.enabled = 0;
+ phy->sas_phy.id = i;
+ phy->sas_phy.sas_addr = &phy->phy_desc->sas_addr[0];
+ phy->sas_phy.frame_rcvd = &phy->frame_rcvd[0];
+ phy->sas_phy.ha = &asd_ha->sas_ha;
+ phy->sas_phy.lldd_phy = phy;
+ }
+
+ /* Now enable and initialize only the enabled phys. */
+ for_each_phy(phy_mask, phy_mask, i) {
+ int err = asd_init_phy(&asd_ha->phys[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/* ---------- Sliding windows ---------- */
+
+static int asd_init_sw(struct asd_ha_struct *asd_ha)
+{
+ struct pci_dev *pcidev = asd_ha->pcidev;
+ int err;
+ u32 v;
+
+ /* Unlock MBARs */
+ err = pci_read_config_dword(pcidev, PCI_CONF_MBAR_KEY, &v);
+ if (err) {
+ asd_printk("couldn't access conf. space of %s\n",
+ pci_name(pcidev));
+ goto Err;
+ }
+ if (v)
+ err = pci_write_config_dword(pcidev, PCI_CONF_MBAR_KEY, v);
+ if (err) {
+ asd_printk("couldn't write to MBAR_KEY of %s\n",
+ pci_name(pcidev));
+ goto Err;
+ }
+
+ /* Set sliding windows A, B and C to point to proper internal
+ * memory regions.
+ */
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWA, REG_BASE_ADDR);
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWB,
+ REG_BASE_ADDR_CSEQCIO);
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWC, REG_BASE_ADDR_EXSI);
+ asd_ha->io_handle[0].swa_base = REG_BASE_ADDR;
+ asd_ha->io_handle[0].swb_base = REG_BASE_ADDR_CSEQCIO;
+ asd_ha->io_handle[0].swc_base = REG_BASE_ADDR_EXSI;
+ MBAR0_SWB_SIZE = asd_ha->io_handle[0].len - 0x80;
+ if (!asd_ha->iospace) {
+ /* MBAR1 will point to OCM (On Chip Memory) */
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR1, OCM_BASE_ADDR);
+ asd_ha->io_handle[1].swa_base = OCM_BASE_ADDR;
+ }
+ spin_lock_init(&asd_ha->iolock);
+Err:
+ return err;
+}
+
+/* ---------- SCB initialization ---------- */
+
+/**
+ * asd_init_scbs - manually allocate the first SCB.
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This allocates the very first SCB which would be sent to the
+ * sequencer for execution. Its bus address is written to
+ * CSEQ_Q_NEW_POINTER, mode page 2, mode 8. Since the bus address of
+ * the _next_ scb to be DMA-ed to the host adapter is read from the last
+ * SCB DMA-ed to the host adapter, we have to always stay one step
+ * ahead of the sequencer and keep one SCB already allocated.
+ */
+static int asd_init_scbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int bitmap_bytes;
+
+ /* allocate the index array and bitmap */
+ asd_ha->seq.tc_index_bitmap_bits = asd_ha->hw_prof.max_scbs;
+ asd_ha->seq.tc_index_array = kzalloc(asd_ha->seq.tc_index_bitmap_bits*
+ sizeof(void *), GFP_KERNEL);
+ if (!asd_ha->seq.tc_index_array)
+ return -ENOMEM;
+
+ bitmap_bytes = (asd_ha->seq.tc_index_bitmap_bits+7)/8;
+ bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+ asd_ha->seq.tc_index_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+ if (!asd_ha->seq.tc_index_bitmap)
+ return -ENOMEM;
+
+ spin_lock_init(&seq->tc_index_lock);
+
+ seq->next_scb.size = sizeof(struct scb);
+ seq->next_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, GFP_KERNEL,
+ &seq->next_scb.dma_handle);
+ if (!seq->next_scb.vaddr) {
+ kfree(asd_ha->seq.tc_index_bitmap);
+ kfree(asd_ha->seq.tc_index_array);
+ asd_ha->seq.tc_index_bitmap = NULL;
+ asd_ha->seq.tc_index_array = NULL;
+ return -ENOMEM;
+ }
+
+ seq->pending = 0;
+ spin_lock_init(&seq->pend_q_lock);
+ INIT_LIST_HEAD(&seq->pend_q);
+
+ return 0;
+}
+
+static inline void asd_get_max_scb_ddb(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->hw_prof.max_scbs = asd_get_cmdctx_size(asd_ha)/ASD_SCB_SIZE;
+ asd_ha->hw_prof.max_ddbs = asd_get_devctx_size(asd_ha)/ASD_DDB_SIZE;
+ ASD_DPRINTK("max_scbs:%d, max_ddbs:%d\n",
+ asd_ha->hw_prof.max_scbs,
+ asd_ha->hw_prof.max_ddbs);
+}
+
+/* ---------- Done List initialization ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long);
+
+static int asd_init_dl(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->seq.actual_dl
+ = asd_alloc_coherent(asd_ha,
+ ASD_DL_SIZE * sizeof(struct done_list_struct),
+ GFP_KERNEL);
+ if (!asd_ha->seq.actual_dl)
+ return -ENOMEM;
+ asd_ha->seq.dl = asd_ha->seq.actual_dl->vaddr;
+ asd_ha->seq.dl_toggle = ASD_DEF_DL_TOGGLE;
+ asd_ha->seq.dl_next = 0;
+ tasklet_init(&asd_ha->seq.dl_tasklet, asd_dl_tasklet_handler,
+ (unsigned long) asd_ha);
+
+ return 0;
+}
+
+/* ---------- EDB and ESCB init ---------- */
+
+static int asd_alloc_edbs(struct asd_ha_struct *asd_ha, unsigned int gfp_flags)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ seq->edb_arr = kmalloc(seq->num_edbs*sizeof(*seq->edb_arr), gfp_flags);
+ if (!seq->edb_arr)
+ return -ENOMEM;
+
+ for (i = 0; i < seq->num_edbs; i++) {
+ seq->edb_arr[i] = asd_alloc_coherent(asd_ha, ASD_EDB_SIZE,
+ gfp_flags);
+ if (!seq->edb_arr[i])
+ goto Err_unroll;
+ memset(seq->edb_arr[i]->vaddr, 0, ASD_EDB_SIZE);
+ }
+
+ ASD_DPRINTK("num_edbs:%d\n", seq->num_edbs);
+
+ return 0;
+
+Err_unroll:
+ for (i-- ; i >= 0; i--)
+ asd_free_coherent(asd_ha, seq->edb_arr[i]);
+ kfree(seq->edb_arr);
+ seq->edb_arr = NULL;
+
+ return -ENOMEM;
+}
+
+static int asd_alloc_escbs(struct asd_ha_struct *asd_ha,
+ unsigned int gfp_flags)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *escb;
+ int i, escbs;
+
+ seq->escb_arr = kmalloc(seq->num_escbs*sizeof(*seq->escb_arr),
+ gfp_flags);
+ if (!seq->escb_arr)
+ return -ENOMEM;
+
+ escbs = seq->num_escbs;
+ escb = asd_ascb_alloc_list(asd_ha, &escbs, gfp_flags);
+ if (!escb) {
+ asd_printk("couldn't allocate list of escbs\n");
+ goto Err;
+ }
+ seq->num_escbs -= escbs; /* subtract what was not allocated */
+ ASD_DPRINTK("num_escbs:%d\n", seq->num_escbs);
+
+ for (i = 0; i < seq->num_escbs; i++, escb = list_entry(escb->list.next,
+ struct asd_ascb,
+ list)) {
+ seq->escb_arr[i] = escb;
+ escb->scb->header.opcode = EMPTY_SCB;
+ }
+
+ return 0;
+Err:
+ kfree(seq->escb_arr);
+ seq->escb_arr = NULL;
+ return -ENOMEM;
+
+}
+
+static void asd_assign_edbs2escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i, k, z = 0;
+
+ for (i = 0; i < seq->num_escbs; i++) {
+ struct asd_ascb *ascb = seq->escb_arr[i];
+ struct empty_scb *escb = &ascb->scb->escb;
+
+ ascb->edb_index = z;
+
+ escb->num_valid = ASD_EDBS_PER_SCB;
+
+ for (k = 0; k < ASD_EDBS_PER_SCB; k++) {
+ struct sg_el *eb = &escb->eb[k];
+ struct asd_dma_tok *edb = seq->edb_arr[z++];
+
+ memset(eb, 0, sizeof(*eb));
+ eb->bus_addr = cpu_to_le64(((u64) edb->dma_handle));
+ eb->size = cpu_to_le32(((u32) edb->size));
+ }
+ }
+}
+
+/**
+ * asd_init_escbs -- allocate and initialize empty scbs
+ * @asd_ha: pointer to host adapter structure
+ *
+ * An empty SCB has sg_elements of ASD_EDBS_PER_SCB (7) buffers.
+ * They transport sense data, etc.
+ */
+static int asd_init_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int err = 0;
+
+ /* Allocate two empty data buffers (edb) per sequencer. */
+ int edbs = 2*(1+asd_ha->hw_prof.num_phys);
+
+ seq->num_escbs = (edbs+ASD_EDBS_PER_SCB-1)/ASD_EDBS_PER_SCB;
+ seq->num_edbs = seq->num_escbs * ASD_EDBS_PER_SCB;
+
+ err = asd_alloc_edbs(asd_ha, GFP_KERNEL);
+ if (err) {
+ asd_printk("couldn't allocate edbs\n");
+ return err;
+ }
+
+ err = asd_alloc_escbs(asd_ha, GFP_KERNEL);
+ if (err) {
+ asd_printk("couldn't allocate escbs\n");
+ return err;
+ }
+
+ asd_assign_edbs2escbs(asd_ha);
+ /* In order to insure that normal SCBs do not overfill sequencer
+ * memory and leave no space for escbs (halting condition),
+ * we increment pending here by the number of escbs. However,
+ * escbs are never pending.
+ */
+ seq->pending = seq->num_escbs;
+ seq->can_queue = 1 + (asd_ha->hw_prof.max_scbs - seq->pending)/2;
+
+ return 0;
+}
+
+/* ---------- HW initialization ---------- */
+
+/**
+ * asd_chip_hardrst -- hard reset the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This takes 16 cycles and is synchronous to CFCLK, which runs
+ * at 200 MHz, so this should take at most 80 nanoseconds.
+ */
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ int count = 100;
+ u32 reg;
+
+ for (i = 0 ; i < 4 ; i++) {
+ asd_write_reg_dword(asd_ha, COMBIST, HARDRST);
+ }
+
+ do {
+ udelay(1);
+ reg = asd_read_reg_dword(asd_ha, CHIMINT);
+ if (reg & HARDRSTDET) {
+ asd_write_reg_dword(asd_ha, CHIMINT,
+ HARDRSTDET|PORRSTDET);
+ return 0;
+ }
+ } while (--count > 0);
+
+ return -ENODEV;
+}
+
+/**
+ * asd_init_chip -- initialize the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Hard resets the chip, disables HA interrupts, downloads the sequnecer
+ * microcode and starts the sequencers. The caller has to explicitly
+ * enable HA interrupts with asd_enable_ints(asd_ha).
+ */
+static int asd_init_chip(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_chip_hardrst(asd_ha);
+ if (err) {
+ asd_printk("couldn't hard reset %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+
+ asd_disable_ints(asd_ha);
+
+ err = asd_init_seqs(asd_ha);
+ if (err) {
+ asd_printk("couldn't init seqs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+
+ err = asd_start_seqs(asd_ha);
+ if (err) {
+ asd_printk("coudln't start seqs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+out:
+ return err;
+}
+
+#define MAX_DEVS ((OCM_MAX_SIZE) / (ASD_DDB_SIZE))
+
+static int max_devs = 0;
+module_param_named(max_devs, max_devs, int, S_IRUGO);
+MODULE_PARM_DESC(max_devs, "\n"
+ "\tMaximum number of SAS devices to support (not LUs).\n"
+ "\tDefault: 2176, Maximum: 65663.\n");
+
+static int max_cmnds = 0;
+module_param_named(max_cmnds, max_cmnds, int, S_IRUGO);
+MODULE_PARM_DESC(max_cmnds, "\n"
+ "\tMaximum number of commands queuable.\n"
+ "\tDefault: 512, Maximum: 66047.\n");
+
+static void asd_extend_devctx_ocm(struct asd_ha_struct *asd_ha)
+{
+ unsigned long dma_addr = OCM_BASE_ADDR;
+ u32 d;
+
+ dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+ asd_write_reg_addr(asd_ha, DEVCTXBASE, (dma_addr_t) dma_addr);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d |= 4;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+ asd_ha->hw_prof.max_ddbs += MAX_DEVS;
+}
+
+static int asd_extend_devctx(struct asd_ha_struct *asd_ha)
+{
+ dma_addr_t dma_handle;
+ unsigned long dma_addr;
+ u32 d;
+ int size;
+
+ asd_extend_devctx_ocm(asd_ha);
+
+ asd_ha->hw_prof.ddb_ext = NULL;
+ if (max_devs <= asd_ha->hw_prof.max_ddbs || max_devs > 0xFFFF) {
+ max_devs = asd_ha->hw_prof.max_ddbs;
+ return 0;
+ }
+
+ size = (max_devs - asd_ha->hw_prof.max_ddbs + 1) * ASD_DDB_SIZE;
+
+ asd_ha->hw_prof.ddb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ddb_ext) {
+ asd_printk("couldn't allocate memory for %d devices\n",
+ max_devs);
+ max_devs = asd_ha->hw_prof.max_ddbs;
+ return -ENOMEM;
+ }
+ dma_handle = asd_ha->hw_prof.ddb_ext->dma_handle;
+ dma_addr = ALIGN((unsigned long) dma_handle, ASD_DDB_SIZE);
+ dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+ dma_handle = (dma_addr_t) dma_addr;
+ asd_write_reg_addr(asd_ha, DEVCTXBASE, dma_handle);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d &= ~4;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+ asd_ha->hw_prof.max_ddbs = max_devs;
+
+ return 0;
+}
+
+static int asd_extend_cmdctx(struct asd_ha_struct *asd_ha)
+{
+ dma_addr_t dma_handle;
+ unsigned long dma_addr;
+ u32 d;
+ int size;
+
+ asd_ha->hw_prof.scb_ext = NULL;
+ if (max_cmnds <= asd_ha->hw_prof.max_scbs || max_cmnds > 0xFFFF) {
+ max_cmnds = asd_ha->hw_prof.max_scbs;
+ return 0;
+ }
+
+ size = (max_cmnds - asd_ha->hw_prof.max_scbs + 1) * ASD_SCB_SIZE;
+
+ asd_ha->hw_prof.scb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.scb_ext) {
+ asd_printk("couldn't allocate memory for %d commands\n",
+ max_cmnds);
+ max_cmnds = asd_ha->hw_prof.max_scbs;
+ return -ENOMEM;
+ }
+ dma_handle = asd_ha->hw_prof.scb_ext->dma_handle;
+ dma_addr = ALIGN((unsigned long) dma_handle, ASD_SCB_SIZE);
+ dma_addr -= asd_ha->hw_prof.max_scbs * ASD_SCB_SIZE;
+ dma_handle = (dma_addr_t) dma_addr;
+ asd_write_reg_addr(asd_ha, CMDCTXBASE, dma_handle);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d &= ~1;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+ asd_ha->hw_prof.max_scbs = max_cmnds;
+
+ return 0;
+}
+
+/**
+ * asd_init_ctxmem -- initialize context memory
+ * asd_ha: pointer to host adapter structure
+ *
+ * This function sets the maximum number of SCBs and
+ * DDBs which can be used by the sequencer. This is normally
+ * 512 and 128 respectively. If support for more SCBs or more DDBs
+ * is required then CMDCTXBASE, DEVCTXBASE and CTXDOMAIN are
+ * initialized here to extend context memory to point to host memory,
+ * thus allowing unlimited support for SCBs and DDBs -- only limited
+ * by host memory.
+ */
+static int asd_init_ctxmem(struct asd_ha_struct *asd_ha)
+{
+ int bitmap_bytes;
+
+ asd_get_max_scb_ddb(asd_ha);
+ asd_extend_devctx(asd_ha);
+ asd_extend_cmdctx(asd_ha);
+
+ /* The kernel wants bitmaps to be unsigned long sized. */
+ bitmap_bytes = (asd_ha->hw_prof.max_ddbs+7)/8;
+ bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+ asd_ha->hw_prof.ddb_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ddb_bitmap)
+ return -ENOMEM;
+ spin_lock_init(&asd_ha->hw_prof.ddb_lock);
+
+ return 0;
+}
+
+int asd_init_hw(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u32 v;
+
+ err = asd_init_sw(asd_ha);
+ if (err)
+ return err;
+
+ err = pci_read_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, &v);
+ if (err) {
+ asd_printk("couldn't read PCIC_HSTPCIX_CNTRL of %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+ pci_write_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL,
+ v | SC_TMR_DIS);
+ if (err) {
+ asd_printk("couldn't disable split completion timer of %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ err = asd_read_ocm(asd_ha);
+ if (err) {
+ asd_printk("couldn't read ocm(%d)\n", err);
+ /* While suspicios, it is not an error that we
+ * couldn't read the OCM. */
+ }
+
+ err = asd_read_flash(asd_ha);
+ if (err) {
+ asd_printk("couldn't read flash(%d)\n", err);
+ /* While suspicios, it is not an error that we
+ * couldn't read FLASH memory.
+ */
+ }
+
+ asd_init_ctxmem(asd_ha);
+
+ asd_get_user_sas_addr(asd_ha);
+ if (!asd_ha->hw_prof.sas_addr[0]) {
+ asd_printk("No SAS Address provided for %s\n",
+ pci_name(asd_ha->pcidev));
+ err = -ENODEV;
+ goto Out;
+ }
+
+ asd_propagate_sas_addr(asd_ha);
+
+ err = asd_init_phys(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize phys for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Out;
+ }
+
+ err = asd_init_scbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize scbs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Out;
+ }
+
+ err = asd_init_dl(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize the done list:%d\n",
+ err);
+ goto Out;
+ }
+
+ err = asd_init_escbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize escbs\n");
+ goto Out;
+ }
+
+ err = asd_init_chip(asd_ha);
+ if (err) {
+ asd_printk("couldn't init the chip\n");
+ goto Out;
+ }
+Out:
+ return err;
+}
+
+/* ---------- Chip reset ---------- */
+
+/**
+ * asd_chip_reset -- reset the host adapter, etc
+ * @asd_ha: pointer to host adapter structure of interest
+ *
+ * Called from the ISR. Hard reset the chip. Let everything
+ * timeout. This should be no different than hot-unplugging the
+ * host adapter. Once everything times out we'll init the chip with
+ * a call to asd_init_chip() and enable interrupts with asd_enable_ints().
+ * XXX finish.
+ */
+static void asd_chip_reset(struct asd_ha_struct *asd_ha)
+{
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+
+ ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev));
+ asd_chip_hardrst(asd_ha);
+ sas_ha->notify_ha_event(sas_ha, HAE_RESET);
+}
+
+/* ---------- Done List Routines ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long data)
+{
+ struct asd_ha_struct *asd_ha = (struct asd_ha_struct *) data;
+ struct asd_seq_data *seq = &asd_ha->seq;
+ unsigned long flags;
+
+ while (1) {
+ struct done_list_struct *dl = &seq->dl[seq->dl_next];
+ struct asd_ascb *ascb;
+
+ if ((dl->toggle & DL_TOGGLE_MASK) != seq->dl_toggle)
+ break;
+
+ /* find the aSCB */
+ spin_lock_irqsave(&seq->tc_index_lock, flags);
+ ascb = asd_tc_index_find(seq, (int)le16_to_cpu(dl->index));
+ spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+ if (unlikely(!ascb)) {
+ ASD_DPRINTK("BUG:sequencer:dl:no ascb?!\n");
+ goto next_1;
+ } else if (ascb->scb->header.opcode == EMPTY_SCB) {
+ goto out;
+ } else if (!ascb->uldd_timer && !del_timer(&ascb->timer)) {
+ goto next_1;
+ }
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ list_del_init(&ascb->list);
+ seq->pending--;
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+ out:
+ ascb->tasklet_complete(ascb, dl);
+
+ next_1:
+ seq->dl_next = (seq->dl_next + 1) & (ASD_DL_SIZE-1);
+ if (!seq->dl_next)
+ seq->dl_toggle ^= DL_TOGGLE_MASK;
+ }
+}
+
+/* ---------- Interrupt Service Routines ---------- */
+
+/**
+ * asd_process_donelist_isr -- schedule processing of done list entries
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_process_donelist_isr(struct asd_ha_struct *asd_ha)
+{
+ tasklet_schedule(&asd_ha->seq.dl_tasklet);
+}
+
+/**
+ * asd_com_sas_isr -- process device communication interrupt (COMINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_com_sas_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 comstat = asd_read_reg_dword(asd_ha, COMSTAT);
+
+ /* clear COMSTAT int */
+ asd_write_reg_dword(asd_ha, COMSTAT, 0xFFFFFFFF);
+
+ if (comstat & CSBUFPERR) {
+ asd_printk("%s: command/status buffer dma parity error\n",
+ pci_name(asd_ha->pcidev));
+ } else if (comstat & CSERR) {
+ int i;
+ u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+ dmaerr &= 0xFF;
+ asd_printk("%s: command/status dma error, DMAERR: 0x%02x, "
+ "CSDMAADR: 0x%04x, CSDMAADR+4: 0x%04x\n",
+ pci_name(asd_ha->pcidev),
+ dmaerr,
+ asd_read_reg_dword(asd_ha, CSDMAADR),
+ asd_read_reg_dword(asd_ha, CSDMAADR+4));
+ asd_printk("CSBUFFER:\n");
+ for (i = 0; i < 8; i++) {
+ asd_printk("%08x %08x %08x %08x\n",
+ asd_read_reg_dword(asd_ha, CSBUFFER),
+ asd_read_reg_dword(asd_ha, CSBUFFER+4),
+ asd_read_reg_dword(asd_ha, CSBUFFER+8),
+ asd_read_reg_dword(asd_ha, CSBUFFER+12));
+ }
+ asd_dump_seq_state(asd_ha, 0);
+ } else if (comstat & OVLYERR) {
+ u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+ dmaerr = (dmaerr >> 8) & 0xFF;
+ asd_printk("%s: overlay dma error:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ dmaerr);
+ }
+ asd_chip_reset(asd_ha);
+}
+
+static inline void asd_arp2_err(struct asd_ha_struct *asd_ha, u32 dchstatus)
+{
+ static const char *halt_code[256] = {
+ "UNEXPECTED_INTERRUPT0",
+ "UNEXPECTED_INTERRUPT1",
+ "UNEXPECTED_INTERRUPT2",
+ "UNEXPECTED_INTERRUPT3",
+ "UNEXPECTED_INTERRUPT4",
+ "UNEXPECTED_INTERRUPT5",
+ "UNEXPECTED_INTERRUPT6",
+ "UNEXPECTED_INTERRUPT7",
+ "UNEXPECTED_INTERRUPT8",
+ "UNEXPECTED_INTERRUPT9",
+ "UNEXPECTED_INTERRUPT10",
+ [11 ... 19] = "unknown[11,19]",
+ "NO_FREE_SCB_AVAILABLE",
+ "INVALID_SCB_OPCODE",
+ "INVALID_MBX_OPCODE",
+ "INVALID_ATA_STATE",
+ "ATA_QUEUE_FULL",
+ "ATA_TAG_TABLE_FAULT",
+ "ATA_TAG_MASK_FAULT",
+ "BAD_LINK_QUEUE_STATE",
+ "DMA2CHIM_QUEUE_ERROR",
+ "EMPTY_SCB_LIST_FULL",
+ "unknown[30]",
+ "IN_USE_SCB_ON_FREE_LIST",
+ "BAD_OPEN_WAIT_STATE",
+ "INVALID_STP_AFFILIATION",
+ "unknown[34]",
+ "EXEC_QUEUE_ERROR",
+ "TOO_MANY_EMPTIES_NEEDED",
+ "EMPTY_REQ_QUEUE_ERROR",
+ "Q_MONIRTT_MGMT_ERROR",
+ "TARGET_MODE_FLOW_ERROR",
+ "DEVICE_QUEUE_NOT_FOUND",
+ "START_IRTT_TIMER_ERROR",
+ "ABORT_TASK_ILLEGAL_REQ",
+ [43 ... 255] = "unknown[43,255]"
+ };
+
+ if (dchstatus & CSEQINT) {
+ u32 arp2int = asd_read_reg_dword(asd_ha, CARP2INT);
+
+ if (arp2int & (ARP2WAITTO|ARP2ILLOPC|ARP2PERR|ARP2CIOPERR)) {
+ asd_printk("%s: CSEQ arp2int:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ arp2int);
+ } else if (arp2int & ARP2HALTC)
+ asd_printk("%s: CSEQ halted: %s\n",
+ pci_name(asd_ha->pcidev),
+ halt_code[(arp2int>>16)&0xFF]);
+ else
+ asd_printk("%s: CARP2INT:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ arp2int);
+ }
+ if (dchstatus & LSEQINT_MASK) {
+ int lseq;
+ u8 lseq_mask = dchstatus & LSEQINT_MASK;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ u32 arp2int = asd_read_reg_dword(asd_ha,
+ LmARP2INT(lseq));
+ if (arp2int & (ARP2WAITTO | ARP2ILLOPC | ARP2PERR
+ | ARP2CIOPERR)) {
+ asd_printk("%s: LSEQ%d arp2int:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ lseq, arp2int);
+ /* XXX we should only do lseq reset */
+ } else if (arp2int & ARP2HALTC)
+ asd_printk("%s: LSEQ%d halted: %s\n",
+ pci_name(asd_ha->pcidev),
+ lseq,halt_code[(arp2int>>16)&0xFF]);
+ else
+ asd_printk("%s: LSEQ%d ARP2INT:0x%x\n",
+ pci_name(asd_ha->pcidev), lseq,
+ arp2int);
+ }
+ }
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_dch_sas_isr -- process device channel interrupt (DEVINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_dch_sas_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 dchstatus = asd_read_reg_dword(asd_ha, DCHSTATUS);
+
+ if (dchstatus & CFIFTOERR) {
+ asd_printk("%s: CFIFTOERR\n", pci_name(asd_ha->pcidev));
+ asd_chip_reset(asd_ha);
+ } else
+ asd_arp2_err(asd_ha, dchstatus);
+}
+
+/**
+ * ads_rbi_exsi_isr -- process external system interface interrupt (INITERR)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_rbi_exsi_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 stat0r = asd_read_reg_dword(asd_ha, ASISTAT0R);
+
+ if (!(stat0r & ASIERR)) {
+ asd_printk("hmm, EXSI interrupted but no error?\n");
+ return;
+ }
+
+ if (stat0r & ASIFMTERR) {
+ asd_printk("ASI SEEPROM format error for %s\n",
+ pci_name(asd_ha->pcidev));
+ } else if (stat0r & ASISEECHKERR) {
+ u32 stat1r = asd_read_reg_dword(asd_ha, ASISTAT1R);
+ asd_printk("ASI SEEPROM checksum 0x%x error for %s\n",
+ stat1r & CHECKSUM_MASK,
+ pci_name(asd_ha->pcidev));
+ } else {
+ u32 statr = asd_read_reg_dword(asd_ha, ASIERRSTATR);
+
+ if (!(statr & CPI2ASIMSTERR_MASK)) {
+ ASD_DPRINTK("hmm, ASIERR?\n");
+ return;
+ } else {
+ u32 addr = asd_read_reg_dword(asd_ha, ASIERRADDR);
+ u32 data = asd_read_reg_dword(asd_ha, ASIERRDATAR);
+
+ asd_printk("%s: CPI2 xfer err: addr: 0x%x, wdata: 0x%x, "
+ "count: 0x%x, byteen: 0x%x, targerr: 0x%x "
+ "master id: 0x%x, master err: 0x%x\n",
+ pci_name(asd_ha->pcidev),
+ addr, data,
+ (statr & CPI2ASIBYTECNT_MASK) >> 16,
+ (statr & CPI2ASIBYTEEN_MASK) >> 12,
+ (statr & CPI2ASITARGERR_MASK) >> 8,
+ (statr & CPI2ASITARGMID_MASK) >> 4,
+ (statr & CPI2ASIMSTERR_MASK));
+ }
+ }
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hst_pcix_isr -- process host interface interrupts
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Asserted on PCIX errors: target abort, etc.
+ */
+static inline void asd_hst_pcix_isr(struct asd_ha_struct *asd_ha)
+{
+ u16 status;
+ u32 pcix_status;
+ u32 ecc_status;
+
+ pci_read_config_word(asd_ha->pcidev, PCI_STATUS, &status);
+ pci_read_config_dword(asd_ha->pcidev, PCIX_STATUS, &pcix_status);
+ pci_read_config_dword(asd_ha->pcidev, ECC_CTRL_STAT, &ecc_status);
+
+ if (status & PCI_STATUS_DETECTED_PARITY)
+ asd_printk("parity error for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_REC_MASTER_ABORT)
+ asd_printk("master abort for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_REC_TARGET_ABORT)
+ asd_printk("target abort for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_PARITY)
+ asd_printk("data parity for %s\n", pci_name(asd_ha->pcidev));
+ else if (pcix_status & RCV_SCE) {
+ asd_printk("received split completion error for %s\n",
+ pci_name(asd_ha->pcidev));
+ pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+ /* XXX: Abort task? */
+ return;
+ } else if (pcix_status & UNEXP_SC) {
+ asd_printk("unexpected split completion for %s\n",
+ pci_name(asd_ha->pcidev));
+ pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+ /* ignore */
+ return;
+ } else if (pcix_status & SC_DISCARD)
+ asd_printk("split completion discarded for %s\n",
+ pci_name(asd_ha->pcidev));
+ else if (ecc_status & UNCOR_ECCERR)
+ asd_printk("uncorrectable ECC error for %s\n",
+ pci_name(asd_ha->pcidev));
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hw_isr -- host adapter interrupt service routine
+ * @irq: ignored
+ * @dev_id: pointer to host adapter structure
+ * @regs: ignored
+ *
+ * The ISR processes done list entries and level 3 error handling.
+ */
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct asd_ha_struct *asd_ha = dev_id;
+ u32 chimint = asd_read_reg_dword(asd_ha, CHIMINT);
+
+ if (!chimint)
+ return IRQ_NONE;
+
+ asd_write_reg_dword(asd_ha, CHIMINT, chimint);
+ (void) asd_read_reg_dword(asd_ha, CHIMINT);
+
+ if (chimint & DLAVAIL)
+ asd_process_donelist_isr(asd_ha);
+ if (chimint & COMINT)
+ asd_com_sas_isr(asd_ha);
+ if (chimint & DEVINT)
+ asd_dch_sas_isr(asd_ha);
+ if (chimint & INITERR)
+ asd_rbi_exsi_isr(asd_ha);
+ if (chimint & HOSTERR)
+ asd_hst_pcix_isr(asd_ha);
+
+ return IRQ_HANDLED;
+}
+
+/* ---------- SCB handling ---------- */
+
+static inline struct asd_ascb *asd_ascb_alloc(struct asd_ha_struct *asd_ha,
+ unsigned int gfp_flags)
+{
+ extern kmem_cache_t *asd_ascb_cache;
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *ascb;
+ unsigned long flags;
+
+ ascb = kmem_cache_alloc(asd_ascb_cache, gfp_flags);
+
+ if (ascb) {
+ memset(ascb, 0, sizeof(*ascb));
+ ascb->dma_scb.size = sizeof(struct scb);
+ ascb->dma_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool,
+ gfp_flags,
+ &ascb->dma_scb.dma_handle);
+ if (!ascb->dma_scb.vaddr) {
+ kmem_cache_free(asd_ascb_cache, ascb);
+ return NULL;
+ }
+ memset(ascb->dma_scb.vaddr, 0, sizeof(struct scb));
+ asd_init_ascb(asd_ha, ascb);
+
+ spin_lock_irqsave(&seq->tc_index_lock, flags);
+ ascb->tc_index = asd_tc_index_get(seq, ascb);
+ spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+ if (ascb->tc_index == -1)
+ goto undo;
+
+ ascb->scb->header.index = cpu_to_le16((u16)ascb->tc_index);
+ }
+
+ return ascb;
+undo:
+ dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+ ascb->dma_scb.dma_handle);
+ kmem_cache_free(asd_ascb_cache, ascb);
+ ASD_DPRINTK("no index for ascb\n");
+ return NULL;
+}
+
+/**
+ * asd_ascb_alloc_list -- allocate a list of aSCBs
+ * @asd_ha: pointer to host adapter structure
+ * @num: pointer to integer number of aSCBs
+ * @gfp_flags: GFP_ flags.
+ *
+ * This is the only function which is used to allocate aSCBs.
+ * It can allocate one or many. If more than one, then they form
+ * a linked list in two ways: by their list field of the ascb struct
+ * and by the next_scb field of the scb_header.
+ *
+ * Returns NULL if no memory was available, else pointer to a list
+ * of ascbs. When this function returns, @num would be the number
+ * of SCBs which were not able to be allocated, 0 if all requested
+ * were able to be allocated.
+ */
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+ *asd_ha, int *num,
+ unsigned int gfp_flags)
+{
+ struct asd_ascb *first = NULL;
+
+ for ( ; *num > 0; --*num) {
+ struct asd_ascb *ascb = asd_ascb_alloc(asd_ha, gfp_flags);
+
+ if (!ascb)
+ break;
+ else if (!first)
+ first = ascb;
+ else {
+ struct asd_ascb *last = list_entry(first->list.prev,
+ struct asd_ascb,
+ list);
+ list_add_tail(&ascb->list, &first->list);
+ last->scb->header.next_scb =
+ cpu_to_le64(((u64)ascb->dma_scb.dma_handle));
+ }
+ }
+
+ return first;
+}
+
+/**
+ * asd_swap_head_scb -- swap the head scb
+ * @asd_ha: pointer to host adapter structure
+ * @ascb: pointer to the head of an ascb list
+ *
+ * The sequencer knows the DMA address of the next SCB to be DMAed to
+ * the host adapter, from initialization or from the last list DMAed.
+ * seq->next_scb keeps the address of this SCB. The sequencer will
+ * DMA to the host adapter this list of SCBs. But the head (first
+ * element) of this list is not known to the sequencer. Here we swap
+ * the head of the list with the known SCB (memcpy()).
+ * Only one memcpy() is required per list so it is in our interest
+ * to keep the list of SCB as long as possible so that the ratio
+ * of number of memcpy calls to the number of SCB DMA-ed is as small
+ * as possible.
+ *
+ * LOCKING: called with the pending list lock held.
+ */
+static inline void asd_swap_head_scb(struct asd_ha_struct *asd_ha,
+ struct asd_ascb *ascb)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *last = list_entry(ascb->list.prev,
+ struct asd_ascb,
+ list);
+ struct asd_dma_tok t = ascb->dma_scb;
+
+ memcpy(seq->next_scb.vaddr, ascb->scb, sizeof(*ascb->scb));
+ ascb->dma_scb = seq->next_scb;
+ ascb->scb = ascb->dma_scb.vaddr;
+ seq->next_scb = t;
+ last->scb->header.next_scb =
+ cpu_to_le64(((u64)seq->next_scb.dma_handle));
+}
+
+/**
+ * asd_start_timers -- (add and) start timers of SCBs
+ * @list: pointer to struct list_head of the scbs
+ * @to: timeout in jiffies
+ *
+ * If an SCB in the @list has no timer function, assign the default
+ * one, then start the timer of the SCB. This function is
+ * intended to be called from asd_post_ascb_list(), just prior to
+ * posting the SCBs to the sequencer.
+ */
+static inline void asd_start_scb_timers(struct list_head *list)
+{
+ struct asd_ascb *ascb;
+ list_for_each_entry(ascb, list, list) {
+ if (!ascb->uldd_timer) {
+ ascb->timer.data = (unsigned long) ascb;
+ ascb->timer.function = asd_ascb_timedout;
+ ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+ add_timer(&ascb->timer);
+ }
+ }
+}
+
+/**
+ * asd_post_ascb_list -- post a list of 1 or more aSCBs to the host adapter
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first aSCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * See queueing comment in asd_post_escb_list().
+ *
+ * Additional note on queuing: In order to minimize the ratio of memcpy()
+ * to the number of ascbs sent, we try to batch-send as many ascbs as possible
+ * in one go.
+ * Two cases are possible:
+ * A) can_queue >= num,
+ * B) can_queue < num.
+ * Case A: we can send the whole batch at once. Increment "pending"
+ * in the beginning of this function, when it is checked, in order to
+ * eliminate races when this function is called by multiple processes.
+ * Case B: should never happen if the managing layer considers
+ * lldd_queue_size.
+ */
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num)
+{
+ unsigned long flags;
+ LIST_HEAD(list);
+ int can_queue;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ can_queue = asd_ha->hw_prof.max_scbs - asd_ha->seq.pending;
+ if (can_queue >= num)
+ asd_ha->seq.pending += num;
+ else
+ can_queue = 0;
+
+ if (!can_queue) {
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+ asd_printk("%s: scb queue full\n", pci_name(asd_ha->pcidev));
+ return -SAS_QUEUE_FULL;
+ }
+
+ asd_swap_head_scb(asd_ha, ascb);
+
+ __list_add(&list, ascb->list.prev, &ascb->list);
+
+ asd_start_scb_timers(&list);
+
+ asd_ha->seq.scbpro += num;
+ list_splice_init(&list, asd_ha->seq.pend_q.prev);
+ asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return 0;
+}
+
+/**
+ * asd_post_escb_list -- post a list of 1 or more empty scb
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first empty SCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * This is essentially the same as asd_post_ascb_list, but we do not
+ * increment pending, add those to the pending list or get indexes.
+ * See asd_init_escbs() and asd_init_post_escbs().
+ *
+ * Since sending a list of ascbs is a superset of sending a single
+ * ascb, this function exists to generalize this. More specifically,
+ * when sending a list of those, we want to do only a _single_
+ * memcpy() at swap head, as opposed to for each ascb sent (in the
+ * case of sending them one by one). That is, we want to minimize the
+ * ratio of memcpy() operations to the number of ascbs sent. The same
+ * logic applies to asd_post_ascb_list().
+ */
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_swap_head_scb(asd_ha, ascb);
+ asd_ha->seq.scbpro += num;
+ asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return 0;
+}
+
+/* ---------- LED ---------- */
+
+/**
+ * asd_turn_led -- turn on/off an LED
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: the PHY id whose LED we want to manupulate
+ * @op: 1 to turn on, 0 to turn off
+ */
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+ if (phy_id < ASD_MAX_PHYS) {
+ u32 v = asd_read_reg_dword(asd_ha, LmCONTROL(phy_id));
+ if (op)
+ v |= LEDPOL;
+ else
+ v &= ~LEDPOL;
+ asd_write_reg_dword(asd_ha, LmCONTROL(phy_id), v);
+ }
+}
+
+/**
+ * asd_control_led -- enable/disable an LED on the board
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: integer, the phy id
+ * @op: integer, 1 to enable, 0 to disable the LED
+ *
+ * First we output enable the LED, then we set the source
+ * to be an external module.
+ */
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+ if (phy_id < ASD_MAX_PHYS) {
+ u32 v;
+
+ v = asd_read_reg_dword(asd_ha, GPIOOER);
+ if (op)
+ v |= (1 << phy_id);
+ else
+ v &= ~(1 << phy_id);
+ asd_write_reg_dword(asd_ha, GPIOOER, v);
+
+ v = asd_read_reg_dword(asd_ha, GPIOCNFGR);
+ if (op)
+ v |= (1 << phy_id);
+ else
+ v &= ~(1 << phy_id);
+ asd_write_reg_dword(asd_ha, GPIOCNFGR, v);
+ }
+}
+
+/* ---------- PHY enable ---------- */
+
+static int asd_enable_phy(struct asd_ha_struct *asd_ha, int phy_id)
+{
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, INT_ENABLE_2), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, HOT_PLUG_DELAY),
+ HOTPLUG_DELAY_TIMEOUT);
+
+ /* Get defaults from manuf. sector */
+ /* XXX we need defaults for those in case MS is broken. */
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_0),
+ phy->phy_desc->phy_control_0);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_1),
+ phy->phy_desc->phy_control_1);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_2),
+ phy->phy_desc->phy_control_2);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_3),
+ phy->phy_desc->phy_control_3);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(phy_id),
+ ASD_COMINIT_TIMEOUT);
+
+ asd_write_reg_addr(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(phy_id),
+ phy->id_frm_tok->dma_handle);
+
+ asd_control_led(asd_ha, phy_id, 1);
+
+ return 0;
+}
+
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
+{
+ u8 phy_m;
+ u8 i;
+ int num = 0, k;
+ struct asd_ascb *ascb;
+ struct asd_ascb *ascb_list;
+
+ if (!phy_mask) {
+ asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__);
+ return 0;
+ }
+
+ for_each_phy(phy_mask, phy_m, i) {
+ num++;
+ asd_enable_phy(asd_ha, i);
+ }
+
+ k = num;
+ ascb_list = asd_ascb_alloc_list(asd_ha, &k, GFP_KERNEL);
+ if (!ascb_list) {
+ asd_printk("no memory for control phy ascb list\n");
+ return -ENOMEM;
+ }
+ num -= k;
+
+ ascb = ascb_list;
+ for_each_phy(phy_mask, phy_m, i) {
+ asd_build_control_phy(ascb, i, ENABLE_PHY);
+ ascb = list_entry(ascb->list.next, struct asd_ascb, list);
+ }
+ ASD_DPRINTK("posting %d control phy scbs\n", num);
+ k = asd_post_ascb_list(asd_ha, ascb_list, num);
+ if (k)
+ asd_ascb_free_list(ascb_list);
+
+ return k;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h
new file mode 100644
index 0000000..c7d5053
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.h
@@ -0,0 +1,397 @@
+/*
+ * Aic94xx SAS/SATA driver hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_HWI_H_
+#define _AIC94XX_HWI_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <scsi/libsas.h>
+
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+
+/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
+#define ASD_MAX_PHYS 8
+#define ASD_PCBA_SN_SIZE 12
+
+/* Those are to be further named properly, the "RAZORx" part, and
+ * subsequently included in include/linux/pci_ids.h.
+ */
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3F 0x43F
+
+struct asd_ha_addrspace {
+ void __iomem *addr;
+ unsigned long start; /* pci resource start */
+ unsigned long len; /* pci resource len */
+ unsigned long flags; /* pci resource flags */
+
+ /* addresses internal to the host adapter */
+ u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
+ u32 swb_base;
+ u32 swc_base;
+};
+
+struct bios_struct {
+ int present;
+ u8 maj;
+ u8 min;
+ u32 bld;
+};
+
+struct unit_element_struct {
+ u16 num;
+ u16 size;
+ void *area;
+};
+
+struct flash_struct {
+ u32 bar;
+ int present;
+ int wide;
+ u8 manuf;
+ u8 dev_id;
+ u8 sec_prot;
+
+ u32 dir_offs;
+};
+
+struct asd_phy_desc {
+ /* From CTRL-A settings, then set to what is appropriate */
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 max_sas_lrate;
+ u8 min_sas_lrate;
+ u8 max_sata_lrate;
+ u8 min_sata_lrate;
+ u8 flags;
+#define ASD_CRC_DIS 1
+#define ASD_SATA_SPINUP_HOLD 2
+
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+};
+
+struct asd_dma_tok {
+ void *vaddr;
+ dma_addr_t dma_handle;
+ size_t size;
+};
+
+struct hw_profile {
+ struct bios_struct bios;
+ struct unit_element_struct ue;
+ struct flash_struct flash;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ char pcba_sn[ASD_PCBA_SN_SIZE+1];
+
+ u8 enabled_phys; /* mask of enabled phys */
+ struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
+ u32 max_scbs; /* absolute sequencer scb queue size */
+ struct asd_dma_tok *scb_ext;
+ u32 max_ddbs;
+ struct asd_dma_tok *ddb_ext;
+
+ spinlock_t ddb_lock;
+ void *ddb_bitmap;
+
+ int num_phys; /* ENABLEABLE */
+ int max_phys; /* REPORTED + ENABLEABLE */
+
+ unsigned addr_range; /* max # of addrs; max # of possible ports */
+ unsigned port_name_base;
+ unsigned dev_name_base;
+ unsigned sata_name_base;
+};
+
+struct asd_ascb {
+ struct list_head list;
+ struct asd_ha_struct *ha;
+
+ struct scb *scb; /* equals dma_scb->vaddr */
+ struct asd_dma_tok dma_scb;
+ struct asd_dma_tok *sg_arr;
+
+ void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
+ u8 uldd_timer:1;
+
+ /* internally generated command */
+ struct timer_list timer;
+ struct completion completion;
+ u8 tag_valid:1;
+ __be16 tag; /* error recovery only */
+
+ /* If this is an Empty SCB, index of first edb in seq->edb_arr. */
+ int edb_index;
+
+ /* Used by the timer timeout function. */
+ int tc_index;
+
+ void *uldd_task;
+};
+
+#define ASD_DL_SIZE_BITS 0x8
+#define ASD_DL_SIZE (1<<(2+ASD_DL_SIZE_BITS))
+#define ASD_DEF_DL_TOGGLE 0x01
+
+struct asd_seq_data {
+ spinlock_t pend_q_lock;
+ u16 scbpro;
+ int pending;
+ struct list_head pend_q;
+ int can_queue; /* per adapter */
+ struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
+
+ spinlock_t tc_index_lock;
+ void **tc_index_array;
+ void *tc_index_bitmap;
+ int tc_index_bitmap_bits;
+
+ struct tasklet_struct dl_tasklet;
+ struct done_list_struct *dl; /* array of done list entries, equals */
+ struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
+ int dl_toggle;
+ int dl_next;
+
+ int num_edbs;
+ struct asd_dma_tok **edb_arr;
+ int num_escbs;
+ struct asd_ascb **escb_arr; /* array of pointers to escbs */
+};
+
+/* This is the Host Adapter structure. It describes the hardware
+ * SAS adapter.
+ */
+struct asd_ha_struct {
+ struct pci_dev *pcidev;
+ const char *name;
+
+ struct sas_ha_struct sas_ha;
+
+ u8 revision_id;
+
+ int iospace;
+ spinlock_t iolock;
+ struct asd_ha_addrspace io_handle[2];
+
+ struct hw_profile hw_prof;
+
+ struct asd_phy phys[ASD_MAX_PHYS];
+ struct asd_sas_port ports[ASD_MAX_PHYS];
+
+ struct dma_pool *scb_pool;
+
+ struct asd_seq_data seq; /* sequencer related */
+};
+
+/* ---------- Common macros ---------- */
+
+#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
+#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8) \
+ ? ((u32)((__dma_handle) >> 32)) \
+ : ((u32)0))
+
+#define dev_to_asd_ha(__dev) pci_get_drvdata(to_pci_dev(__dev))
+#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF \
+ && ((__site_no) & 0xF0FF) > 0x001F)
+/* For each bit set in __lseq_mask, set __lseq to equal the bit
+ * position of the set bit and execute the statement following.
+ * __mc is the temporary mask, used as a mask "counter".
+ */
+#define for_each_sequencer(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+#define for_each_phy(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+
+#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
+
+/* ---------- DMA allocs ---------- */
+
+static inline struct asd_dma_tok *asd_dmatok_alloc(unsigned int flags)
+{
+ return kmem_cache_alloc(asd_dma_token_cache, flags);
+}
+
+static inline void asd_dmatok_free(struct asd_dma_tok *token)
+{
+ kmem_cache_free(asd_dma_token_cache, token);
+}
+
+static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
+ asd_ha, size_t size,
+ unsigned int flags)
+{
+ struct asd_dma_tok *token = asd_dmatok_alloc(flags);
+ if (token) {
+ token->size = size;
+ token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
+ token->size,
+ &token->dma_handle,
+ flags);
+ if (!token->vaddr) {
+ asd_dmatok_free(token);
+ token = NULL;
+ }
+ }
+ return token;
+}
+
+static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
+ struct asd_dma_tok *token)
+{
+ if (token) {
+ dma_free_coherent(&asd_ha->pcidev->dev, token->size,
+ token->vaddr, token->dma_handle);
+ asd_dmatok_free(token);
+ }
+}
+
+static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
+ struct asd_ascb *ascb)
+{
+ INIT_LIST_HEAD(&ascb->list);
+ ascb->scb = ascb->dma_scb.vaddr;
+ ascb->ha = asd_ha;
+ ascb->timer.function = NULL;
+ init_timer(&ascb->timer);
+ ascb->tc_index = -1;
+ init_completion(&ascb->completion);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
+{
+ seq->tc_index_array[index] = NULL;
+ clear_bit(index, seq->tc_index_bitmap);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
+{
+ int index;
+
+ index = find_first_zero_bit(seq->tc_index_bitmap,
+ seq->tc_index_bitmap_bits);
+ if (index == seq->tc_index_bitmap_bits)
+ return -1;
+
+ seq->tc_index_array[index] = ptr;
+ set_bit(index, seq->tc_index_bitmap);
+
+ return index;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
+{
+ return seq->tc_index_array[index];
+}
+
+/**
+ * asd_ascb_free -- free a single aSCB after is has completed
+ * @ascb: pointer to the aSCB of interest
+ *
+ * This frees an aSCB after it has been executed/completed by
+ * the sequencer.
+ */
+static inline void asd_ascb_free(struct asd_ascb *ascb)
+{
+ if (ascb) {
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ unsigned long flags;
+
+ BUG_ON(!list_empty(&ascb->list));
+ spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
+ asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
+ spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
+ dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+ ascb->dma_scb.dma_handle);
+ kmem_cache_free(asd_ascb_cache, ascb);
+ }
+}
+
+/**
+ * asd_ascb_list_free -- free a list of ascbs
+ * @ascb_list: a list of ascbs
+ *
+ * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
+ * It is used when say the scb queueing function returned QUEUE_FULL,
+ * and we do not need the ascbs any more.
+ */
+static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
+{
+ LIST_HEAD(list);
+ struct list_head *n, *pos;
+
+ __list_add(&list, ascb_list->list.prev, &ascb_list->list);
+ list_for_each_safe(pos, n, &list) {
+ list_del_init(pos);
+ asd_ascb_free(list_entry(pos, struct asd_ascb, list));
+ }
+}
+
+/* ---------- Function declarations ---------- */
+
+int asd_init_hw(struct asd_ha_struct *asd_ha);
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs);
+
+
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+ *asd_ha, int *num,
+ unsigned int gfp_mask);
+
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha);
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+ u8 subfunc);
+
+void asd_ascb_timedout(unsigned long data);
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha);
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
new file mode 100644
index 0000000..ee2ccad
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -0,0 +1,866 @@
+/*
+ * Aic94xx SAS/SATA driver initialization.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+/* The format is "version.release.patchlevel" */
+#define ASD_DRIVER_VERSION "1.0.2"
+
+static int use_msi = 0;
+module_param_named(use_msi, use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "\n"
+ "\tEnable(1) or disable(0) using PCI MSI.\n"
+ "\tDefault: 0");
+
+static int lldd_max_execute_num = 0;
+module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
+MODULE_PARM_DESC(collector, "\n"
+ "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
+ "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
+ "\tThe aic94xx SAS LLDD supports both modes.\n"
+ "\tDefault: 0 (Direct Mode).\n");
+
+char sas_addr_str[2*SAS_ADDR_SIZE + 1] = "";
+
+static struct scsi_transport_template *aic94xx_transport_template;
+
+static struct scsi_host_template aic94xx_sht = {
+ .module = THIS_MODULE,
+ /* .name is initialized */
+ .name = "aic94xx",
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+ struct asd_ha_addrspace *io_handle;
+
+ asd_ha->iospace = 0;
+ for (i = 0; i < 3; i += 2) {
+ io_handle = &asd_ha->io_handle[i==0?0:1];
+ io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+ io_handle->len = pci_resource_len(asd_ha->pcidev, i);
+ io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+ err = -ENODEV;
+ if (!io_handle->start || !io_handle->len) {
+ asd_printk("MBAR%d start or length for %s is 0.\n",
+ i==0?0:1, pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+ if (err) {
+ asd_printk("couldn't reserve memory region for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ if (io_handle->flags & IORESOURCE_CACHEABLE)
+ io_handle->addr = ioremap(io_handle->start,
+ io_handle->len);
+ else
+ io_handle->addr = ioremap_nocache(io_handle->start,
+ io_handle->len);
+ if (!io_handle->addr) {
+ asd_printk("couldn't map MBAR%d of %s\n", i==0?0:1,
+ pci_name(asd_ha->pcidev));
+ goto Err_unreq;
+ }
+ }
+
+ return 0;
+Err_unreq:
+ pci_release_region(asd_ha->pcidev, i);
+Err:
+ if (i > 0) {
+ io_handle = &asd_ha->io_handle[0];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 0);
+ }
+ return err;
+}
+
+static void __devexit asd_unmap_memio(struct asd_ha_struct *asd_ha)
+{
+ struct asd_ha_addrspace *io_handle;
+
+ io_handle = &asd_ha->io_handle[1];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 2);
+
+ io_handle = &asd_ha->io_handle[0];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 0);
+}
+
+static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha)
+{
+ int i = PCI_IOBAR_OFFSET, err;
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];
+
+ asd_ha->iospace = 1;
+ io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+ io_handle->len = pci_resource_len(asd_ha->pcidev, i);
+ io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+ io_handle->addr = (void __iomem *) io_handle->start;
+ if (!io_handle->start || !io_handle->len) {
+ asd_printk("couldn't get IO ports for %s\n",
+ pci_name(asd_ha->pcidev));
+ return -ENODEV;
+ }
+ err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+ if (err) {
+ asd_printk("couldn't reserve io space for %s\n",
+ pci_name(asd_ha->pcidev));
+ }
+
+ return err;
+}
+
+static void __devexit asd_unmap_ioport(struct asd_ha_struct *asd_ha)
+{
+ pci_release_region(asd_ha->pcidev, PCI_IOBAR_OFFSET);
+}
+
+static int __devinit asd_map_ha(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u16 cmd_reg;
+
+ err = pci_read_config_word(asd_ha->pcidev, PCI_COMMAND, &cmd_reg);
+ if (err) {
+ asd_printk("couldn't read command register of %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+
+ err = -ENODEV;
+ if (cmd_reg & PCI_COMMAND_MEMORY) {
+ if ((err = asd_map_memio(asd_ha)))
+ goto Err;
+ } else if (cmd_reg & PCI_COMMAND_IO) {
+ if ((err = asd_map_ioport(asd_ha)))
+ goto Err;
+ asd_printk("%s ioport mapped -- upgrade your hardware\n",
+ pci_name(asd_ha->pcidev));
+ } else {
+ asd_printk("no proper device access to %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+
+ return 0;
+Err:
+ return err;
+}
+
+static void __devexit asd_unmap_ha(struct asd_ha_struct *asd_ha)
+{
+ if (asd_ha->iospace)
+ asd_unmap_ioport(asd_ha);
+ else
+ asd_unmap_memio(asd_ha);
+}
+
+static const char *asd_dev_rev[30] = {
+ [0] = "A0",
+ [1] = "A1",
+ [8] = "B0",
+};
+
+static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+
+ err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
+ &asd_ha->revision_id);
+ if (err) {
+ asd_printk("couldn't read REVISION ID register of %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ err = -ENODEV;
+ if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
+ asd_printk("%s is revision %s (%X), which is not supported\n",
+ pci_name(asd_ha->pcidev),
+ asd_dev_rev[asd_ha->revision_id],
+ asd_ha->revision_id);
+ goto Err;
+ }
+ /* Provide some sane default values. */
+ asd_ha->hw_prof.max_scbs = 512;
+ asd_ha->hw_prof.max_ddbs = 128;
+ asd_ha->hw_prof.num_phys = ASD_MAX_PHYS;
+ /* All phys are enabled, by default. */
+ asd_ha->hw_prof.enabled_phys = 0xFF;
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+ SAS_LINK_RATE_3_0_GBPS;
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+ SAS_LINK_RATE_1_5_GBPS;
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+ SAS_LINK_RATE_1_5_GBPS;
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+ SAS_LINK_RATE_1_5_GBPS;
+ }
+
+ return 0;
+Err:
+ return err;
+}
+
+static int __devinit asd_aic9410_setup(struct asd_ha_struct *asd_ha)
+{
+ int err = asd_common_setup(asd_ha);
+
+ if (err)
+ return err;
+
+ asd_ha->hw_prof.addr_range = 8;
+ asd_ha->hw_prof.port_name_base = 0;
+ asd_ha->hw_prof.dev_name_base = 8;
+ asd_ha->hw_prof.sata_name_base = 16;
+
+ return 0;
+}
+
+static int __devinit asd_aic9405_setup(struct asd_ha_struct *asd_ha)
+{
+ int err = asd_common_setup(asd_ha);
+
+ if (err)
+ return err;
+
+ asd_ha->hw_prof.addr_range = 4;
+ asd_ha->hw_prof.port_name_base = 0;
+ asd_ha->hw_prof.dev_name_base = 4;
+ asd_ha->hw_prof.sata_name_base = 8;
+
+ return 0;
+}
+
+static ssize_t asd_show_dev_rev(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ asd_dev_rev[asd_ha->revision_id]);
+}
+static DEVICE_ATTR(revision, S_IRUGO, asd_show_dev_rev, NULL);
+
+static ssize_t asd_show_dev_bios_build(struct device *dev,
+ struct device_attribute *attr,char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", asd_ha->hw_prof.bios.bld);
+}
+static DEVICE_ATTR(bios_build, S_IRUGO, asd_show_dev_bios_build, NULL);
+
+static ssize_t asd_show_dev_pcba_sn(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%s\n", asd_ha->hw_prof.pcba_sn);
+}
+static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL);
+
+static void asd_create_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+/* The first entry, 0, is used for dynamic ids, the rest for devices
+ * we know about.
+ */
+static struct asd_pcidev_struct {
+ const char * name;
+ int (*setup)(struct asd_ha_struct *asd_ha);
+} asd_pcidev_data[] = {
+ /* Id 0 is used for dynamic ids. */
+ { .name = "Adaptec AIC-94xx SAS/SATA Host Adapter",
+ .setup = asd_aic9410_setup
+ },
+ { .name = "Adaptec AIC-9410W SAS/SATA Host Adapter",
+ .setup = asd_aic9410_setup
+ },
+ { .name = "Adaptec AIC-9405W SAS/SATA Host Adapter",
+ .setup = asd_aic9405_setup
+ },
+};
+
+static inline int asd_create_ha_caches(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->scb_pool = dma_pool_create(ASD_DRIVER_NAME "_scb_pool",
+ &asd_ha->pcidev->dev,
+ sizeof(struct scb),
+ 8, 0);
+ if (!asd_ha->scb_pool) {
+ asd_printk("couldn't create scb pool\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * asd_free_edbs -- free empty data buffers
+ * asd_ha: pointer to host adapter structure
+ */
+static inline void asd_free_edbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_edbs; i++)
+ asd_free_coherent(asd_ha, seq->edb_arr[i]);
+ kfree(seq->edb_arr);
+ seq->edb_arr = NULL;
+}
+
+static inline void asd_free_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_escbs; i++) {
+ if (!list_empty(&seq->escb_arr[i]->list))
+ list_del_init(&seq->escb_arr[i]->list);
+
+ asd_ascb_free(seq->escb_arr[i]);
+ }
+ kfree(seq->escb_arr);
+ seq->escb_arr = NULL;
+}
+
+static inline void asd_destroy_ha_caches(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ if (asd_ha->hw_prof.ddb_ext)
+ asd_free_coherent(asd_ha, asd_ha->hw_prof.ddb_ext);
+ if (asd_ha->hw_prof.scb_ext)
+ asd_free_coherent(asd_ha, asd_ha->hw_prof.scb_ext);
+
+ if (asd_ha->hw_prof.ddb_bitmap)
+ kfree(asd_ha->hw_prof.ddb_bitmap);
+ asd_ha->hw_prof.ddb_bitmap = NULL;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_phy *phy = &asd_ha->phys[i];
+
+ asd_free_coherent(asd_ha, phy->id_frm_tok);
+ }
+ if (asd_ha->seq.escb_arr)
+ asd_free_escbs(asd_ha);
+ if (asd_ha->seq.edb_arr)
+ asd_free_edbs(asd_ha);
+ if (asd_ha->hw_prof.ue.area) {
+ kfree(asd_ha->hw_prof.ue.area);
+ asd_ha->hw_prof.ue.area = NULL;
+ }
+ if (asd_ha->seq.tc_index_array) {
+ kfree(asd_ha->seq.tc_index_array);
+ kfree(asd_ha->seq.tc_index_bitmap);
+ asd_ha->seq.tc_index_array = NULL;
+ asd_ha->seq.tc_index_bitmap = NULL;
+ }
+ if (asd_ha->seq.actual_dl) {
+ asd_free_coherent(asd_ha, asd_ha->seq.actual_dl);
+ asd_ha->seq.actual_dl = NULL;
+ asd_ha->seq.dl = NULL;
+ }
+ if (asd_ha->seq.next_scb.vaddr) {
+ dma_pool_free(asd_ha->scb_pool, asd_ha->seq.next_scb.vaddr,
+ asd_ha->seq.next_scb.dma_handle);
+ asd_ha->seq.next_scb.vaddr = NULL;
+ }
+ dma_pool_destroy(asd_ha->scb_pool);
+ asd_ha->scb_pool = NULL;
+}
+
+kmem_cache_t *asd_dma_token_cache;
+kmem_cache_t *asd_ascb_cache;
+
+static int asd_create_global_caches(void)
+{
+ if (!asd_dma_token_cache) {
+ asd_dma_token_cache
+ = kmem_cache_create(ASD_DRIVER_NAME "_dma_token",
+ sizeof(struct asd_dma_tok),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (!asd_dma_token_cache) {
+ asd_printk("couldn't create dma token cache\n");
+ return -ENOMEM;
+ }
+ }
+
+ if (!asd_ascb_cache) {
+ asd_ascb_cache = kmem_cache_create(ASD_DRIVER_NAME "_ascb",
+ sizeof(struct asd_ascb),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (!asd_ascb_cache) {
+ asd_printk("couldn't create ascb cache\n");
+ goto Err;
+ }
+ }
+
+ return 0;
+Err:
+ kmem_cache_destroy(asd_dma_token_cache);
+ asd_dma_token_cache = NULL;
+ return -ENOMEM;
+}
+
+static void asd_destroy_global_caches(void)
+{
+ if (asd_dma_token_cache)
+ kmem_cache_destroy(asd_dma_token_cache);
+ asd_dma_token_cache = NULL;
+
+ if (asd_ascb_cache)
+ kmem_cache_destroy(asd_ascb_cache);
+ asd_ascb_cache = NULL;
+}
+
+static int asd_register_sas_ha(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ struct asd_sas_phy **sas_phys =
+ kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_phy), GFP_KERNEL);
+ struct asd_sas_port **sas_ports =
+ kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_port), GFP_KERNEL);
+
+ if (!sas_phys || !sas_ports) {
+ kfree(sas_phys);
+ kfree(sas_ports);
+ return -ENOMEM;
+ }
+
+ asd_ha->sas_ha.sas_ha_name = (char *) asd_ha->name;
+ asd_ha->sas_ha.lldd_module = THIS_MODULE;
+ asd_ha->sas_ha.sas_addr = &asd_ha->hw_prof.sas_addr[0];
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ sas_phys[i] = &asd_ha->phys[i].sas_phy;
+ sas_ports[i] = &asd_ha->ports[i];
+ }
+
+ asd_ha->sas_ha.sas_phy = sas_phys;
+ asd_ha->sas_ha.sas_port= sas_ports;
+ asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
+
+ asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
+
+ return sas_register_ha(&asd_ha->sas_ha);
+}
+
+static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = sas_unregister_ha(&asd_ha->sas_ha);
+
+ sas_remove_host(asd_ha->sas_ha.core.shost);
+ scsi_remove_host(asd_ha->sas_ha.core.shost);
+ scsi_host_put(asd_ha->sas_ha.core.shost);
+
+ kfree(asd_ha->sas_ha.sas_phy);
+ kfree(asd_ha->sas_ha.sas_port);
+
+ return err;
+}
+
+static int __devinit asd_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct asd_pcidev_struct *asd_dev;
+ unsigned asd_id = (unsigned) id->driver_data;
+ struct asd_ha_struct *asd_ha;
+ struct Scsi_Host *shost;
+ int err;
+
+ if (asd_id >= ARRAY_SIZE(asd_pcidev_data)) {
+ asd_printk("wrong driver_data in PCI table\n");
+ return -ENODEV;
+ }
+
+ if ((err = pci_enable_device(dev))) {
+ asd_printk("couldn't enable device %s\n", pci_name(dev));
+ return err;
+ }
+
+ pci_set_master(dev);
+
+ err = -ENOMEM;
+
+ shost = scsi_host_alloc(&aic94xx_sht, sizeof(void *));
+ if (!shost)
+ goto Err;
+
+ asd_dev = &asd_pcidev_data[asd_id];
+
+ asd_ha = kzalloc(sizeof(*asd_ha), GFP_KERNEL);
+ if (!asd_ha) {
+ asd_printk("out of memory\n");
+ goto Err;
+ }
+ asd_ha->pcidev = dev;
+ asd_ha->sas_ha.pcidev = asd_ha->pcidev;
+ asd_ha->sas_ha.lldd_ha = asd_ha;
+
+ asd_ha->name = asd_dev->name;
+ asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev));
+
+ SHOST_TO_SAS_HA(shost) = &asd_ha->sas_ha;
+ asd_ha->sas_ha.core.shost = shost;
+ shost->transportt = aic94xx_transport_template;
+ shost->max_id = ~0;
+ shost->max_lun = ~0;
+ shost->max_cmd_len = 16;
+
+ err = scsi_add_host(shost, &dev->dev);
+ if (err) {
+ scsi_host_put(shost);
+ goto Err_free;
+ }
+
+
+
+ err = asd_dev->setup(asd_ha);
+ if (err)
+ goto Err_free;
+
+ err = -ENODEV;
+ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)
+ && !pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK))
+ ;
+ else if (!pci_set_dma_mask(dev, DMA_32BIT_MASK)
+ && !pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK))
+ ;
+ else {
+ asd_printk("no suitable DMA mask for %s\n", pci_name(dev));
+ goto Err_free;
+ }
+
+ pci_set_drvdata(dev, asd_ha);
+
+ err = asd_map_ha(asd_ha);
+ if (err)
+ goto Err_free;
+
+ err = asd_create_ha_caches(asd_ha);
+ if (err)
+ goto Err_unmap;
+
+ err = asd_init_hw(asd_ha);
+ if (err)
+ goto Err_free_cache;
+
+ asd_printk("device %s: SAS addr %llx, PCBA SN %s, %d phys, %d enabled "
+ "phys, flash %s, BIOS %s%d\n",
+ pci_name(dev), SAS_ADDR(asd_ha->hw_prof.sas_addr),
+ asd_ha->hw_prof.pcba_sn, asd_ha->hw_prof.max_phys,
+ asd_ha->hw_prof.num_phys,
+ asd_ha->hw_prof.flash.present ? "present" : "not present",
+ asd_ha->hw_prof.bios.present ? "build " : "not present",
+ asd_ha->hw_prof.bios.bld);
+
+ shost->can_queue = asd_ha->seq.can_queue;
+
+ if (use_msi)
+ pci_enable_msi(asd_ha->pcidev);
+
+ err = request_irq(asd_ha->pcidev->irq, asd_hw_isr, SA_SHIRQ,
+ ASD_DRIVER_NAME, asd_ha);
+ if (err) {
+ asd_printk("couldn't get irq %d for %s\n",
+ asd_ha->pcidev->irq, pci_name(asd_ha->pcidev));
+ goto Err_irq;
+ }
+ asd_enable_ints(asd_ha);
+
+ err = asd_init_post_escbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't post escbs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err_escbs;
+ }
+ ASD_DPRINTK("escbs posted\n");
+
+ asd_create_dev_attrs(asd_ha);
+
+ err = asd_register_sas_ha(asd_ha);
+ if (err)
+ goto Err_reg_sas;
+
+ err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys);
+ if (err) {
+ asd_printk("coudln't enable phys, err:%d\n", err);
+ goto Err_en_phys;
+ }
+ ASD_DPRINTK("enabled phys\n");
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ ssleep(1);
+ /* Wait for discovery to finish */
+ scsi_flush_work(asd_ha->sas_ha.core.shost);
+
+ return 0;
+Err_en_phys:
+ asd_unregister_sas_ha(asd_ha);
+Err_reg_sas:
+ asd_remove_dev_attrs(asd_ha);
+Err_escbs:
+ asd_disable_ints(asd_ha);
+ free_irq(dev->irq, asd_ha);
+Err_irq:
+ if (use_msi)
+ pci_disable_msi(dev);
+ asd_chip_hardrst(asd_ha);
+Err_free_cache:
+ asd_destroy_ha_caches(asd_ha);
+Err_unmap:
+ asd_unmap_ha(asd_ha);
+Err_free:
+ kfree(asd_ha);
+ scsi_remove_host(shost);
+Err:
+ pci_disable_device(dev);
+ return err;
+}
+
+static void asd_free_queues(struct asd_ha_struct *asd_ha)
+{
+ unsigned long flags;
+ LIST_HEAD(pending);
+ struct list_head *n, *pos;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_ha->seq.pending = 0;
+ list_splice_init(&asd_ha->seq.pend_q, &pending);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ if (!list_empty(&pending))
+ ASD_DPRINTK("Uh-oh! Pending is not empty!\n");
+
+ list_for_each_safe(pos, n, &pending) {
+ struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list);
+ list_del_init(pos);
+ ASD_DPRINTK("freeing from pending\n");
+ asd_ascb_free(ascb);
+ }
+}
+
+static void asd_turn_off_leds(struct asd_ha_struct *asd_ha)
+{
+ u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+ u8 i;
+
+ for_each_phy(phy_mask, phy_mask, i) {
+ asd_turn_led(asd_ha, i, 0);
+ asd_control_led(asd_ha, i, 0);
+ }
+}
+
+static void __devexit asd_pci_remove(struct pci_dev *dev)
+{
+ struct asd_ha_struct *asd_ha = pci_get_drvdata(dev);
+
+ if (!asd_ha)
+ return;
+
+ asd_unregister_sas_ha(asd_ha);
+
+ asd_disable_ints(asd_ha);
+
+ asd_remove_dev_attrs(asd_ha);
+
+ /* XXX more here as needed */
+
+ free_irq(dev->irq, asd_ha);
+ if (use_msi)
+ pci_disable_msi(asd_ha->pcidev);
+ asd_turn_off_leds(asd_ha);
+ asd_chip_hardrst(asd_ha);
+ asd_free_queues(asd_ha);
+ asd_destroy_ha_caches(asd_ha);
+ asd_unmap_ha(asd_ha);
+ kfree(asd_ha);
+ pci_disable_device(dev);
+ return;
+}
+
+static ssize_t asd_version_show(struct device_driver *driver, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION);
+}
+static DRIVER_ATTR(version, S_IRUGO, asd_version_show, NULL);
+
+static void asd_create_driver_attrs(struct device_driver *driver)
+{
+ driver_create_file(driver, &driver_attr_version);
+}
+
+static void asd_remove_driver_attrs(struct device_driver *driver)
+{
+ driver_remove_file(driver, &driver_attr_version);
+}
+
+static struct sas_domain_function_template aic94xx_transport_functions = {
+ .lldd_port_formed = asd_update_port_links,
+
+ .lldd_dev_found = asd_dev_found,
+ .lldd_dev_gone = asd_dev_gone,
+
+ .lldd_execute_task = asd_execute_task,
+
+ .lldd_abort_task = asd_abort_task,
+ .lldd_abort_task_set = asd_abort_task_set,
+ .lldd_clear_aca = asd_clear_aca,
+ .lldd_clear_task_set = asd_clear_task_set,
+ .lldd_I_T_nexus_reset = NULL,
+ .lldd_lu_reset = asd_lu_reset,
+ .lldd_query_task = asd_query_task,
+
+ .lldd_clear_nexus_port = asd_clear_nexus_port,
+ .lldd_clear_nexus_ha = asd_clear_nexus_ha,
+
+ .lldd_control_phy = asd_control_phy,
+};
+
+static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR10),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR12),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR30),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR32),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3E),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3F),
+ 0, 0, 2},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, aic94xx_pci_table);
+
+static struct pci_driver aic94xx_pci_driver = {
+ .name = ASD_DRIVER_NAME,
+ .id_table = aic94xx_pci_table,
+ .probe = asd_pci_probe,
+ .remove = __devexit_p(asd_pci_remove),
+};
+
+static int __init aic94xx_init(void)
+{
+ int err;
+
+
+ asd_printk("%s version %s loaded\n", ASD_DRIVER_DESCRIPTION,
+ ASD_DRIVER_VERSION);
+
+ err = asd_create_global_caches();
+ if (err)
+ return err;
+
+ aic94xx_transport_template =
+ sas_domain_attach_transport(&aic94xx_transport_functions);
+ if (!aic94xx_transport_template)
+ goto out_destroy_caches;
+
+ err = pci_register_driver(&aic94xx_pci_driver);
+ if (err)
+ goto out_release_transport;
+
+ asd_create_driver_attrs(&aic94xx_pci_driver.driver);
+
+ return err;
+
+ out_release_transport:
+ sas_release_transport(aic94xx_transport_template);
+ out_destroy_caches:
+ asd_destroy_global_caches();
+
+ return err;
+}
+
+static void __exit aic94xx_exit(void)
+{
+ asd_remove_driver_attrs(&aic94xx_pci_driver.driver);
+ pci_unregister_driver(&aic94xx_pci_driver);
+ sas_release_transport(aic94xx_transport_template);
+ asd_destroy_global_caches();
+ asd_printk("%s version %s unloaded\n", ASD_DRIVER_DESCRIPTION,
+ ASD_DRIVER_VERSION);
+}
+
+module_init(aic94xx_init);
+module_exit(aic94xx_exit);
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION(ASD_DRIVER_DESCRIPTION);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(ASD_DRIVER_VERSION);
diff --git a/drivers/scsi/aic94xx/aic94xx_reg.c b/drivers/scsi/aic94xx/aic94xx_reg.c
new file mode 100644
index 0000000..f210dac
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg.c
@@ -0,0 +1,332 @@
+/*
+ * Aic94xx SAS/SATA driver register access.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include "aic94xx_reg.h"
+#include "aic94xx.h"
+
+/* Writing to device address space.
+ * Offset comes before value to remind that the operation of
+ * this function is *offs = val.
+ */
+static inline void asd_write_byte(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u8 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outb(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writeb(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+static inline void asd_write_word(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u16 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outw(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writew(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+static inline void asd_write_dword(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u32 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outl(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writel(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+/* Reading from device address space.
+ */
+static inline u8 asd_read_byte(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u8 val;
+ if (unlikely(asd_ha->iospace))
+ val = inb((unsigned long) asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readb(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u16 asd_read_word(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u16 val;
+ if (unlikely(asd_ha->iospace))
+ val = inw((unsigned long)asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readw(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u32 asd_read_dword(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u32 val;
+ if (unlikely(asd_ha->iospace))
+ val = inl((unsigned long) asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readl(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u32 asd_mem_offs_swa(void)
+{
+ return 0;
+}
+
+static inline u32 asd_mem_offs_swc(void)
+{
+ return asd_mem_offs_swa() + MBAR0_SWA_SIZE;
+}
+
+static inline u32 asd_mem_offs_swb(void)
+{
+ return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20;
+}
+
+/* We know that the register wanted is in the range
+ * of the sliding window.
+ */
+#define ASD_READ_SW(ww, type, ord) \
+static inline type asd_read_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+ u32 reg) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
+ u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+ return asd_read_##ord (asd_ha, (unsigned long) map_offs); \
+}
+
+#define ASD_WRITE_SW(ww, type, ord) \
+static inline void asd_write_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+ u32 reg, type val) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
+ u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+ asd_write_##ord (asd_ha, (unsigned long) map_offs, val); \
+}
+
+ASD_READ_SW(swa, u8, byte);
+ASD_READ_SW(swa, u16, word);
+ASD_READ_SW(swa, u32, dword);
+
+ASD_READ_SW(swb, u8, byte);
+ASD_READ_SW(swb, u16, word);
+ASD_READ_SW(swb, u32, dword);
+
+ASD_READ_SW(swc, u8, byte);
+ASD_READ_SW(swc, u16, word);
+ASD_READ_SW(swc, u32, dword);
+
+ASD_WRITE_SW(swa, u8, byte);
+ASD_WRITE_SW(swa, u16, word);
+ASD_WRITE_SW(swa, u32, dword);
+
+ASD_WRITE_SW(swb, u8, byte);
+ASD_WRITE_SW(swb, u16, word);
+ASD_WRITE_SW(swb, u32, dword);
+
+ASD_WRITE_SW(swc, u8, byte);
+ASD_WRITE_SW(swc, u16, word);
+ASD_WRITE_SW(swc, u32, dword);
+
+/*
+ * A word about sliding windows:
+ * MBAR0 is divided into sliding windows A, C and B, in that order.
+ * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes.
+ * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes.
+ * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F.
+ * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0.
+ * See asd_init_sw() in aic94xx_hwi.c
+ *
+ * We map the most common registers we'd access of the internal 4GB
+ * host adapter memory space. If a register/internal memory location
+ * is wanted which is not mapped, we slide SWB, by paging it,
+ * see asd_move_swb() in aic94xx_reg.c.
+ */
+
+/**
+ * asd_move_swb -- move sliding window B
+ * @asd_ha: pointer to host adapter structure
+ * @reg: register desired to be within range of the new window
+ */
+static inline void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg)
+{
+ u32 base = reg & ~(MBAR0_SWB_SIZE-1);
+ pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base);
+ asd_ha->io_handle[0].swb_base = base;
+}
+
+static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val)
+{
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+ if (io_handle->swa_base <= reg
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+ asd_write_swa_byte (asd_ha, reg,val);
+ else if (io_handle->swb_base <= reg
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+ asd_write_swb_byte (asd_ha, reg, val);
+ else if (io_handle->swc_base <= reg
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+ asd_write_swc_byte (asd_ha, reg, val);
+ else {
+ /* Ok, we have to move SWB */
+ asd_move_swb(asd_ha, reg);
+ asd_write_swb_byte (asd_ha, reg, val);
+ }
+}
+
+#define ASD_WRITE_REG(type, ord) \
+void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\
+{ \
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+ unsigned long flags; \
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
+ spin_lock_irqsave(&asd_ha->iolock, flags); \
+ if (io_handle->swa_base <= reg \
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
+ asd_write_swa_##ord (asd_ha, reg,val); \
+ else if (io_handle->swb_base <= reg \
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
+ asd_write_swb_##ord (asd_ha, reg, val); \
+ else if (io_handle->swc_base <= reg \
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
+ asd_write_swc_##ord (asd_ha, reg, val); \
+ else { \
+ /* Ok, we have to move SWB */ \
+ asd_move_swb(asd_ha, reg); \
+ asd_write_swb_##ord (asd_ha, reg, val); \
+ } \
+ spin_unlock_irqrestore(&asd_ha->iolock, flags); \
+}
+
+ASD_WRITE_REG(u8, byte);
+ASD_WRITE_REG(u16,word);
+ASD_WRITE_REG(u32,dword);
+
+static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg)
+{
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+ u8 val;
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+ if (io_handle->swa_base <= reg
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+ val = asd_read_swa_byte (asd_ha, reg);
+ else if (io_handle->swb_base <= reg
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+ val = asd_read_swb_byte (asd_ha, reg);
+ else if (io_handle->swc_base <= reg
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+ val = asd_read_swc_byte (asd_ha, reg);
+ else {
+ /* Ok, we have to move SWB */
+ asd_move_swb(asd_ha, reg);
+ val = asd_read_swb_byte (asd_ha, reg);
+ }
+ return val;
+}
+
+#define ASD_READ_REG(type, ord) \
+type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg) \
+{ \
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+ type val; \
+ unsigned long flags; \
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
+ spin_lock_irqsave(&asd_ha->iolock, flags); \
+ if (io_handle->swa_base <= reg \
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
+ val = asd_read_swa_##ord (asd_ha, reg); \
+ else if (io_handle->swb_base <= reg \
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
+ val = asd_read_swb_##ord (asd_ha, reg); \
+ else if (io_handle->swc_base <= reg \
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
+ val = asd_read_swc_##ord (asd_ha, reg); \
+ else { \
+ /* Ok, we have to move SWB */ \
+ asd_move_swb(asd_ha, reg); \
+ val = asd_read_swb_##ord (asd_ha, reg); \
+ } \
+ spin_unlock_irqrestore(&asd_ha->iolock, flags); \
+ return val; \
+}
+
+ASD_READ_REG(u8, byte);
+ASD_READ_REG(u16,word);
+ASD_READ_REG(u32,dword);
+
+/**
+ * asd_read_reg_string -- read a string of bytes from io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @dst: pointer to a destination buffer where data will be written to
+ * @offs: start offset (register) to read from
+ * @count: number of bytes to read
+ */
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+ u32 offs, int count)
+{
+ u8 *p = dst;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->iolock, flags);
+ for ( ; count > 0; count--, offs++, p++)
+ *p = __asd_read_reg_byte(asd_ha, offs);
+ spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
+
+/**
+ * asd_write_reg_string -- write a string of bytes to io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @src: pointer to source buffer where data will be read from
+ * @offs: start offset (register) to write to
+ * @count: number of bytes to write
+ */
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+ u32 offs, int count)
+{
+ u8 *p = src;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->iolock, flags);
+ for ( ; count > 0; count--, offs++, p++)
+ __asd_write_reg_byte(asd_ha, offs, *p);
+ spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_reg.h b/drivers/scsi/aic94xx/aic94xx_reg.h
new file mode 100644
index 0000000..2279307
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg.h
@@ -0,0 +1,302 @@
+/*
+ * Aic94xx SAS/SATA driver hardware registers definitions.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_REG_H_
+#define _AIC94XX_REG_H_
+
+#include <asm/io.h>
+#include "aic94xx_hwi.h"
+
+/* Values */
+#define AIC9410_DEV_REV_B0 0x8
+
+/* MBAR0, SWA, SWB, SWC, internal memory space addresses */
+#define REG_BASE_ADDR 0xB8000000
+#define REG_BASE_ADDR_CSEQCIO 0xB8002000
+#define REG_BASE_ADDR_EXSI 0xB8042800
+
+#define MBAR0_SWA_SIZE 0x58
+extern u32 MBAR0_SWB_SIZE;
+#define MBAR0_SWC_SIZE 0x8
+
+/* MBAR1, points to On Chip Memory */
+#define OCM_BASE_ADDR 0xA0000000
+#define OCM_MAX_SIZE 0x20000
+
+/* Smallest address possible to reference */
+#define ALL_BASE_ADDR OCM_BASE_ADDR
+
+/* PCI configuration space registers */
+#define PCI_IOBAR_OFFSET 4
+
+#define PCI_CONF_MBAR1 0x6C
+#define PCI_CONF_MBAR0_SWA 0x70
+#define PCI_CONF_MBAR0_SWB 0x74
+#define PCI_CONF_MBAR0_SWC 0x78
+#define PCI_CONF_MBAR_KEY 0x7C
+#define PCI_CONF_FLSH_BAR 0xB8
+
+#include "aic94xx_reg_def.h"
+
+u8 asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg);
+u16 asd_read_reg_word(struct asd_ha_struct *asd_ha, u32 reg);
+u32 asd_read_reg_dword(struct asd_ha_struct *asd_ha, u32 reg);
+
+void asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val);
+void asd_write_reg_word(struct asd_ha_struct *asd_ha, u32 reg, u16 val);
+void asd_write_reg_dword(struct asd_ha_struct *asd_ha, u32 reg, u32 val);
+
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+ u32 offs, int count);
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+ u32 offs, int count);
+
+#define ASD_READ_OCM(type, ord, S) \
+static inline type asd_read_ocm_##ord (struct asd_ha_struct *asd_ha, \
+ u32 offs) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \
+ type val = read##S (io_handle->addr + (unsigned long) offs); \
+ rmb(); \
+ return val; \
+}
+
+ASD_READ_OCM(u8, byte, b);
+ASD_READ_OCM(u16,word, w);
+ASD_READ_OCM(u32,dword,l);
+
+#define ASD_WRITE_OCM(type, ord, S) \
+static inline void asd_write_ocm_##ord (struct asd_ha_struct *asd_ha, \
+ u32 offs, type val) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \
+ write##S (val, io_handle->addr + (unsigned long) offs); \
+ return; \
+}
+
+ASD_WRITE_OCM(u8, byte, b);
+ASD_WRITE_OCM(u16,word, w);
+ASD_WRITE_OCM(u32,dword,l);
+
+#define ASD_DDBSITE_READ(type, ord) \
+static inline type asd_ddbsite_read_##ord (struct asd_ha_struct *asd_ha, \
+ u16 ddb_site_no, \
+ u16 offs) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \
+ return asd_read_reg_##ord (asd_ha, CTXACCESS); \
+}
+
+ASD_DDBSITE_READ(u32, dword);
+ASD_DDBSITE_READ(u16, word);
+
+static inline u8 asd_ddbsite_read_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no,
+ u16 offs)
+{
+ if (offs & 1)
+ return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+ offs & ~1) >> 8;
+ else
+ return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+ offs) & 0xFF;
+}
+
+
+#define ASD_DDBSITE_WRITE(type, ord) \
+static inline void asd_ddbsite_write_##ord (struct asd_ha_struct *asd_ha, \
+ u16 ddb_site_no, \
+ u16 offs, type val) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \
+ asd_write_reg_##ord (asd_ha, CTXACCESS, val); \
+}
+
+ASD_DDBSITE_WRITE(u32, dword);
+ASD_DDBSITE_WRITE(u16, word);
+
+static inline void asd_ddbsite_write_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no,
+ u16 offs, u8 val)
+{
+ u16 base = offs & ~1;
+ u16 rval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+ if (offs & 1)
+ rval = (val << 8) | (rval & 0xFF);
+ else
+ rval = (rval & 0xFF00) | val;
+ asd_ddbsite_write_word(asd_ha, ddb_site_no, base, rval);
+}
+
+
+#define ASD_SCBSITE_READ(type, ord) \
+static inline type asd_scbsite_read_##ord (struct asd_ha_struct *asd_ha, \
+ u16 scb_site_no, \
+ u16 offs) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \
+ return asd_read_reg_##ord (asd_ha, CTXACCESS); \
+}
+
+ASD_SCBSITE_READ(u32, dword);
+ASD_SCBSITE_READ(u16, word);
+
+static inline u8 asd_scbsite_read_byte(struct asd_ha_struct *asd_ha,
+ u16 scb_site_no,
+ u16 offs)
+{
+ if (offs & 1)
+ return asd_scbsite_read_word(asd_ha, scb_site_no,
+ offs & ~1) >> 8;
+ else
+ return asd_scbsite_read_word(asd_ha, scb_site_no,
+ offs) & 0xFF;
+}
+
+
+#define ASD_SCBSITE_WRITE(type, ord) \
+static inline void asd_scbsite_write_##ord (struct asd_ha_struct *asd_ha, \
+ u16 scb_site_no, \
+ u16 offs, type val) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \
+ asd_write_reg_##ord (asd_ha, CTXACCESS, val); \
+}
+
+ASD_SCBSITE_WRITE(u32, dword);
+ASD_SCBSITE_WRITE(u16, word);
+
+static inline void asd_scbsite_write_byte(struct asd_ha_struct *asd_ha,
+ u16 scb_site_no,
+ u16 offs, u8 val)
+{
+ u16 base = offs & ~1;
+ u16 rval = asd_scbsite_read_word(asd_ha, scb_site_no, base);
+ if (offs & 1)
+ rval = (val << 8) | (rval & 0xFF);
+ else
+ rval = (rval & 0xFF00) | val;
+ asd_scbsite_write_word(asd_ha, scb_site_no, base, rval);
+}
+
+/**
+ * asd_ddbsite_update_word -- atomically update a word in a ddb site
+ * @asd_ha: pointer to host adapter structure
+ * @ddb_site_no: the DDB site number
+ * @offs: the offset into the DDB
+ * @oldval: old value found in that offset
+ * @newval: the new value to replace it
+ *
+ * This function is used when the sequencers are running and we need to
+ * update a DDB site atomically without expensive pausing and upausing
+ * of the sequencers and accessing the DDB site through the CIO bus.
+ *
+ * Return 0 on success; -EFAULT on parity error; -EAGAIN if the old value
+ * is different than the current value at that offset.
+ */
+static inline int asd_ddbsite_update_word(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no, u16 offs,
+ u16 oldval, u16 newval)
+{
+ u8 done;
+ u16 oval = asd_ddbsite_read_word(asd_ha, ddb_site_no, offs);
+ if (oval != oldval)
+ return -EAGAIN;
+ asd_write_reg_word(asd_ha, AOLDDATA, oldval);
+ asd_write_reg_word(asd_ha, ANEWDATA, newval);
+ do {
+ done = asd_read_reg_byte(asd_ha, ATOMICSTATCTL);
+ } while (!(done & ATOMICDONE));
+ if (done & ATOMICERR)
+ return -EFAULT; /* parity error */
+ else if (done & ATOMICWIN)
+ return 0; /* success */
+ else
+ return -EAGAIN; /* oldval different than current value */
+}
+
+static inline int asd_ddbsite_update_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no, u16 offs,
+ u8 _oldval, u8 _newval)
+{
+ u16 base = offs & ~1;
+ u16 oval;
+ u16 nval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+ if (offs & 1) {
+ if ((nval >> 8) != _oldval)
+ return -EAGAIN;
+ nval = (_newval << 8) | (nval & 0xFF);
+ oval = (_oldval << 8) | (nval & 0xFF);
+ } else {
+ if ((nval & 0xFF) != _oldval)
+ return -EAGAIN;
+ nval = (nval & 0xFF00) | _newval;
+ oval = (nval & 0xFF00) | _oldval;
+ }
+ return asd_ddbsite_update_word(asd_ha, ddb_site_no, base, oval, nval);
+}
+
+static inline void asd_write_reg_addr(struct asd_ha_struct *asd_ha, u32 reg,
+ dma_addr_t dma_handle)
+{
+ asd_write_reg_dword(asd_ha, reg, ASD_BUSADDR_LO(dma_handle));
+ asd_write_reg_dword(asd_ha, reg+4, ASD_BUSADDR_HI(dma_handle));
+}
+
+static inline u32 asd_get_cmdctx_size(struct asd_ha_struct *asd_ha)
+{
+ /* DCHREVISION returns 0, possibly broken */
+ u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+ return ctxmemsize ? 65536 : 32768;
+}
+
+static inline u32 asd_get_devctx_size(struct asd_ha_struct *asd_ha)
+{
+ u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+ return ctxmemsize ? 8192 : 4096;
+}
+
+static inline void asd_disable_ints(struct asd_ha_struct *asd_ha)
+{
+ asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+}
+
+static inline void asd_enable_ints(struct asd_ha_struct *asd_ha)
+{
+ /* Enable COM SAS interrupt on errors, COMSTAT */
+ asd_write_reg_dword(asd_ha, COMSTATEN,
+ EN_CSBUFPERR | EN_CSERR | EN_OVLYERR);
+ /* Enable DCH SAS CFIFTOERR */
+ asd_write_reg_dword(asd_ha, DCHSTATUS, EN_CFIFTOERR);
+ /* Enable Host Device interrupts */
+ asd_write_reg_dword(asd_ha, CHIMINTEN, SET_CHIMINTEN);
+}
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
new file mode 100644
index 0000000..b79f45f
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -0,0 +1,2398 @@
+/*
+ * Aic94xx SAS/SATA driver hardware registers defintions.
+ *
+ * Copyright (C) 2004 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Luben Tuikov: Some register value updates to make it work with the window
+ * agnostic register r/w functions. Some register corrections, sizes,
+ * etc.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $
+ *
+ */
+
+#ifndef _ADP94XX_REG_DEF_H_
+#define _ADP94XX_REG_DEF_H_
+
+/*
+ * Common definitions.
+ */
+#define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */
+#define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */
+#define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */
+
+/********************* COM_SAS registers definition *************************/
+
+/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h.
+ */
+
+/*
+ * CHIM Registers, Address Range : (0x00-0xFF)
+ */
+#define COMBIST (REG_BASE_ADDR + 0x00)
+
+/* bits 31:24 */
+#define L7BLKRST 0x80000000
+#define L6BLKRST 0x40000000
+#define L5BLKRST 0x20000000
+#define L4BLKRST 0x10000000
+#define L3BLKRST 0x08000000
+#define L2BLKRST 0x04000000
+#define L1BLKRST 0x02000000
+#define L0BLKRST 0x01000000
+#define LmBLKRST 0xFF000000
+#define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid))
+
+#define OCMBLKRST 0x00400000
+#define CTXMEMBLKRST 0x00200000
+#define CSEQBLKRST 0x00100000
+#define EXSIBLKRST 0x00040000
+#define DPIBLKRST 0x00020000
+#define DFIFBLKRST 0x00010000
+#define HARDRST 0x00000200
+#define COMBLKRST 0x00000100
+#define FRCDFPERR 0x00000080
+#define FRCCIOPERR 0x00000020
+#define FRCBISTERR 0x00000010
+#define COMBISTEN 0x00000004
+#define COMBISTDONE 0x00000002 /* ro */
+#define COMBISTFAIL 0x00000001 /* ro */
+
+#define COMSTAT (REG_BASE_ADDR + 0x04)
+
+#define REQMBXREAD 0x00000040
+#define RSPMBXAVAIL 0x00000020
+#define CSBUFPERR 0x00000008
+#define OVLYERR 0x00000004
+#define CSERR 0x00000002
+#define OVLYDMADONE 0x00000001
+
+#define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \
+ CSBUFPERR | OVLYERR | CSERR |\
+ OVLYDMADONE)
+
+#define COMSTATEN (REG_BASE_ADDR + 0x08)
+
+#define EN_REQMBXREAD 0x00000040
+#define EN_RSPMBXAVAIL 0x00000020
+#define EN_CSBUFPERR 0x00000008
+#define EN_OVLYERR 0x00000004
+#define EN_CSERR 0x00000002
+#define EN_OVLYDONE 0x00000001
+
+#define SCBPRO (REG_BASE_ADDR + 0x0C)
+
+#define SCBCONS_MASK 0xFFFF0000
+#define SCBPRO_MASK 0x0000FFFF
+
+#define CHIMREQMBX (REG_BASE_ADDR + 0x10)
+
+#define CHIMRSPMBX (REG_BASE_ADDR + 0x14)
+
+#define CHIMINT (REG_BASE_ADDR + 0x18)
+
+#define EXT_INT0 0x00000800
+#define EXT_INT1 0x00000400
+#define PORRSTDET 0x00000200
+#define HARDRSTDET 0x00000100
+#define DLAVAILQ 0x00000080 /* ro */
+#define HOSTERR 0x00000040
+#define INITERR 0x00000020
+#define DEVINT 0x00000010
+#define COMINT 0x00000008
+#define DEVTIMER2 0x00000004
+#define DEVTIMER1 0x00000002
+#define DLAVAIL 0x00000001
+
+#define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\
+ DEVTIMER2 | DEVTIMER1 | DLAVAIL)
+
+#define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT)
+
+#define CHIMINTEN (REG_BASE_ADDR + 0x1C)
+
+#define RST_EN_EXT_INT1 0x01000000
+#define RST_EN_EXT_INT0 0x00800000
+#define RST_EN_HOSTERR 0x00400000
+#define RST_EN_INITERR 0x00200000
+#define RST_EN_DEVINT 0x00100000
+#define RST_EN_COMINT 0x00080000
+#define RST_EN_DEVTIMER2 0x00040000
+#define RST_EN_DEVTIMER1 0x00020000
+#define RST_EN_DLAVAIL 0x00010000
+#define SET_EN_EXT_INT1 0x00000100
+#define SET_EN_EXT_INT0 0x00000080
+#define SET_EN_HOSTERR 0x00000040
+#define SET_EN_INITERR 0x00000020
+#define SET_EN_DEVINT 0x00000010
+#define SET_EN_COMINT 0x00000008
+#define SET_EN_DEVTIMER2 0x00000004
+#define SET_EN_DEVTIMER1 0x00000002
+#define SET_EN_DLAVAIL 0x00000001
+
+#define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \
+ RST_EN_DEVINT | RST_EN_COMINT | \
+ RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\
+ RST_EN_DLAVAIL)
+
+#define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\
+ SET_EN_DEVINT | SET_EN_COMINT |\
+ SET_EN_DLAVAIL)
+
+#define OVLYDMACTL (REG_BASE_ADDR + 0x20)
+
+#define OVLYADR_MASK 0x07FF0000
+#define OVLYLSEQ_MASK 0x0000FF00
+#define OVLYCSEQ 0x00000080
+#define OVLYHALTERR 0x00000040
+#define PIOCMODE 0x00000020
+#define RESETOVLYDMA 0x00000008 /* wo */
+#define STARTOVLYDMA 0x00000004
+#define STOPOVLYDMA 0x00000002 /* wo */
+#define OVLYDMAACT 0x00000001 /* ro */
+
+#define OVLYDMACNT (REG_BASE_ADDR + 0x24)
+
+#define OVLYDOMAIN1 0x20000000 /* ro */
+#define OVLYDOMAIN0 0x10000000
+#define OVLYBUFADR_MASK 0x007F0000
+#define OVLYDMACNT_MASK 0x00003FFF
+
+#define OVLYDMAADR (REG_BASE_ADDR + 0x28)
+
+#define DMAERR (REG_BASE_ADDR + 0x30)
+
+#define OVLYERRSTAT_MASK 0x0000FF00 /* ro */
+#define CSERRSTAT_MASK 0x000000FF /* ro */
+
+#define SPIODATA (REG_BASE_ADDR + 0x34)
+
+/* 0x38 - 0x3C are reserved */
+
+#define T1CNTRLR (REG_BASE_ADDR + 0x40)
+
+#define T1DONE 0x00010000 /* ro */
+#define TIMER64 0x00000400
+#define T1ENABLE 0x00000200
+#define T1RELOAD 0x00000100
+#define T1PRESCALER_MASK 0x00000003
+
+#define T1CMPR (REG_BASE_ADDR + 0x44)
+
+#define T1CNTR (REG_BASE_ADDR + 0x48)
+
+#define T2CNTRLR (REG_BASE_ADDR + 0x4C)
+
+#define T2DONE 0x00010000 /* ro */
+#define T2ENABLE 0x00000200
+#define T2RELOAD 0x00000100
+#define T2PRESCALER_MASK 0x00000003
+
+#define T2CMPR (REG_BASE_ADDR + 0x50)
+
+#define T2CNTR (REG_BASE_ADDR + 0x54)
+
+/* 0x58h - 0xFCh are reserved */
+
+/*
+ * DCH_SAS Registers, Address Range : (0x800-0xFFF)
+ */
+#define CMDCTXBASE (REG_BASE_ADDR + 0x800)
+
+#define DEVCTXBASE (REG_BASE_ADDR + 0x808)
+
+#define CTXDOMAIN (REG_BASE_ADDR + 0x810)
+
+#define DEVCTXDOMAIN1 0x00000008 /* ro */
+#define DEVCTXDOMAIN0 0x00000004
+#define CMDCTXDOMAIN1 0x00000002 /* ro */
+#define CMDCTXDOMAIN0 0x00000001
+
+#define DCHCTL (REG_BASE_ADDR + 0x814)
+
+#define OCMBISTREPAIR 0x00080000
+#define OCMBISTEN 0x00040000
+#define OCMBISTDN 0x00020000 /* ro */
+#define OCMBISTFAIL 0x00010000 /* ro */
+#define DDBBISTEN 0x00004000
+#define DDBBISTDN 0x00002000 /* ro */
+#define DDBBISTFAIL 0x00001000 /* ro */
+#define SCBBISTEN 0x00000400
+#define SCBBISTDN 0x00000200 /* ro */
+#define SCBBISTFAIL 0x00000100 /* ro */
+
+#define MEMSEL_MASK 0x000000E0
+#define MEMSEL_CCM_LSEQ 0x00000000
+#define MEMSEL_CCM_IOP 0x00000020
+#define MEMSEL_CCM_SASCTL 0x00000040
+#define MEMSEL_DCM_LSEQ 0x00000060
+#define MEMSEL_DCM_IOP 0x00000080
+#define MEMSEL_OCM 0x000000A0
+
+#define FRCERR 0x00000010
+#define AUTORLS 0x00000001
+
+#define DCHREVISION (REG_BASE_ADDR + 0x818)
+
+#define DCHREVISION_MASK 0x000000FF
+
+#define DCHSTATUS (REG_BASE_ADDR + 0x81C)
+
+#define EN_CFIFTOERR 0x00020000
+#define CFIFTOERR 0x00000200
+#define CSEQINT 0x00000100 /* ro */
+#define LSEQ7INT 0x00000080 /* ro */
+#define LSEQ6INT 0x00000040 /* ro */
+#define LSEQ5INT 0x00000020 /* ro */
+#define LSEQ4INT 0x00000010 /* ro */
+#define LSEQ3INT 0x00000008 /* ro */
+#define LSEQ2INT 0x00000004 /* ro */
+#define LSEQ1INT 0x00000002 /* ro */
+#define LSEQ0INT 0x00000001 /* ro */
+
+#define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\
+ LSEQ4INT | LSEQ3INT | LSEQ2INT |\
+ LSEQ1INT | LSEQ0INT)
+
+#define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820)
+#define ENFAIRMST 0x00FF0000
+#define DISWRMST9 0x00000200
+#define DISWRMST8 0x00000100
+#define DISRDMST 0x000000FF
+
+#define ATOMICSTATCTL (REG_BASE_ADDR + 0x824)
+/* 8 bit wide */
+#define AUTOINC 0x80
+#define ATOMICERR 0x04
+#define ATOMICWIN 0x02
+#define ATOMICDONE 0x01
+
+
+#define ALTCIOADR (REG_BASE_ADDR + 0x828)
+/* 16 bit; bits 8:0 define CIO addr space of CSEQ */
+
+#define ASCBPTR (REG_BASE_ADDR + 0x82C)
+/* 16 bit wide */
+
+#define ADDBPTR (REG_BASE_ADDR + 0x82E)
+/* 16 bit wide */
+
+#define ANEWDATA (REG_BASE_ADDR + 0x830)
+/* 16 bit */
+
+#define AOLDDATA (REG_BASE_ADDR + 0x834)
+/* 16 bit */
+
+#define CTXACCESS (REG_BASE_ADDR + 0x838)
+/* 32 bit */
+
+/* 0x83Ch - 0xFFCh are reserved */
+
+/*
+ * ARP2 External Processor Registers, Address Range : (0x00-0x1F)
+ */
+#define ARP2CTL 0x00
+
+#define FRCSCRPERR 0x00040000
+#define FRCARP2PERR 0x00020000
+#define FRCARP2ILLOPC 0x00010000
+#define ENWAITTO 0x00008000
+#define PERRORDIS 0x00004000
+#define FAILDIS 0x00002000
+#define CIOPERRDIS 0x00001000
+#define BREAKEN3 0x00000800
+#define BREAKEN2 0x00000400
+#define BREAKEN1 0x00000200
+#define BREAKEN0 0x00000100
+#define EPAUSE 0x00000008
+#define PAUSED 0x00000004 /* ro */
+#define STEP 0x00000002
+#define ARP2RESET 0x00000001 /* wo */
+
+#define ARP2INT 0x04
+
+#define HALTCODE_MASK 0x00FF0000 /* ro */
+#define ARP2WAITTO 0x00000100
+#define ARP2HALTC 0x00000080
+#define ARP2ILLOPC 0x00000040
+#define ARP2PERR 0x00000020
+#define ARP2CIOPERR 0x00000010
+#define ARP2BREAK3 0x00000008
+#define ARP2BREAK2 0x00000004
+#define ARP2BREAK1 0x00000002
+#define ARP2BREAK0 0x00000001
+
+#define ARP2INTEN 0x08
+
+#define EN_ARP2WAITTO 0x00000100
+#define EN_ARP2HALTC 0x00000080
+#define EN_ARP2ILLOPC 0x00000040
+#define EN_ARP2PERR 0x00000020
+#define EN_ARP2CIOPERR 0x00000010
+#define EN_ARP2BREAK3 0x00000008
+#define EN_ARP2BREAK2 0x00000004
+#define EN_ARP2BREAK1 0x00000002
+#define EN_ARP2BREAK0 0x00000001
+
+#define ARP2BREAKADR01 0x0C
+
+#define BREAKADR1_MASK 0x0FFF0000
+#define BREAKADR0_MASK 0x00000FFF
+
+#define ARP2BREAKADR23 0x10
+
+#define BREAKADR3_MASK 0x0FFF0000
+#define BREAKADR2_MASK 0x00000FFF
+
+/* 0x14h - 0x1Ch are reserved */
+
+/*
+ * ARP2 Registers, Address Range : (0x00-0x1F)
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MODEPTR 0x00
+
+#define DSTMODE 0xF0
+#define SRCMODE 0x0F
+
+#define ALTMODE 0x01
+
+#define ALTDMODE 0xF0
+#define ALTSMODE 0x0F
+
+#define ATOMICXCHG 0x02
+
+#define FLAG 0x04
+
+#define INTCODE_MASK 0xF0
+#define ALTMODEV2 0x04
+#define CARRY_INT 0x02
+#define CARRY 0x01
+
+#define ARP2INTCTL 0x05
+
+#define PAUSEDIS 0x80
+#define RSTINTCTL 0x40
+#define POPALTMODE 0x08
+#define ALTMODEV 0x04
+#define INTMASK 0x02
+#define IRET 0x01
+
+#define STACK 0x06
+
+#define FUNCTION1 0x07
+
+#define PRGMCNT 0x08
+
+#define ACCUM 0x0A
+
+#define SINDEX 0x0C
+
+#define DINDEX 0x0E
+
+#define ALLONES 0x10
+
+#define ALLZEROS 0x11
+
+#define SINDIR 0x12
+
+#define DINDIR 0x13
+
+#define JUMLDIR 0x14
+
+#define ARP2HALTCODE 0x15
+
+#define CURRADDR 0x16
+
+#define LASTADDR 0x18
+
+#define NXTLADDR 0x1A
+
+#define DBGPORTPTR 0x1C
+
+#define DBGPORT 0x1D
+
+/*
+ * CIO Registers.
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MnSCBPTR 0x20
+
+#define MnDDBPTR 0x22
+
+#define SCRATCHPAGE 0x24
+
+#define MnSCRATCHPAGE 0x25
+
+#define SCRATCHPAGESV 0x26
+
+#define MnSCRATCHPAGESV 0x27
+
+#define MnDMAERRS 0x46
+
+#define MnSGDMAERRS 0x47
+
+#define MnSGBUF 0x53
+
+#define MnSGDMASTAT 0x5b
+
+#define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDMAENG 0x60
+
+#define MnPIPECTL 0x61
+
+#define MnSGBADR 0x65
+
+#define MnSCB_SITE 0x100
+
+#define MnDDB_SITE 0x180
+
+/*
+ * The common definitions below have the same address offset for both
+ * CSEQ and LmSEQ.
+ */
+#define BISTCTL0 0x4C
+
+#define BISTCTL1 0x50
+
+#define MAPPEDSCR 0x800
+
+/*
+ * CSEQ Host Register, Address Range : (0x000-0xFFC)
+ */
+#define CSEQ_HOST_REG_BASE_ADR 0xB8001000
+
+#define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL)
+
+#define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT)
+
+#define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN)
+
+#define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01)
+
+#define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23)
+
+#define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1)
+
+#define CSEQRAMBISTEN 0x00000040
+#define CSEQRAMBISTDN 0x00000020 /* ro */
+#define CSEQRAMBISTFAIL 0x00000010 /* ro */
+#define CSEQSCRBISTEN 0x00000004
+#define CSEQSCRBISTDN 0x00000002 /* ro */
+#define CSEQSCRBISTFAIL 0x00000001 /* ro */
+
+#define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR)
+
+/*
+ * CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC)
+ * 16 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO
+
+#define CSEQm_CIO_REG(Mode, Reg) \
+ (CSEQ_CIO_REG_BASE_ADR + \
+ ((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg))
+
+#define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR)
+
+#define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE)
+
+#define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG)
+
+#define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG)
+
+#define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL)
+
+#define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK)
+
+#define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1)
+
+#define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT)
+
+#define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM)
+
+#define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX)
+
+#define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX)
+
+#define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES)
+
+#define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS)
+
+#define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR)
+
+#define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR)
+
+#define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR)
+
+#define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE)
+
+#define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR)
+
+#define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR)
+
+#define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR)
+
+#define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR)
+
+#define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT)
+
+#define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE)
+
+#define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR)
+
+#define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR)
+
+#define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE)
+
+#define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28)
+
+#define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C)
+
+/* mode 0-7 */
+#define MnREQMBX 0x30
+#define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30)
+
+/* mode 8 */
+#define CSEQCON CSEQm_CIO_REG(8, 0x30)
+
+/* mode 0-7 */
+#define MnRSPMBX 0x34
+#define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34)
+
+/* mode 8 */
+#define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34)
+
+/* mode 8 */
+#define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35)
+
+/* mode 8 */
+#define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36)
+
+/* mode 8 */
+#define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37)
+
+#define CSHALTERR 0x10
+#define RESETCSDMA 0x08 /* wo */
+#define STARTCSDMA 0x04
+#define STOPCSDMA 0x02 /* wo */
+#define CSDMAACT 0x01 /* ro */
+
+/* mode 0-7 */
+#define MnINT 0x38
+#define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38)
+
+#define CMnREQMBXE 0x02
+#define CMnRSPMBXF 0x01
+#define CMnINT_MASK 0x00000003
+
+/* mode 8 */
+#define CSEQREQMBX CSEQm_CIO_REG(8, 0x38)
+
+/* mode 0-7 */
+#define MnINTEN 0x3C
+#define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C)
+
+#define EN_CMnRSPMBXF 0x01
+
+/* mode 8 */
+#define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C)
+
+/* mode 8 */
+#define CSDMAADR CSEQm_CIO_REG(8, 0x40)
+
+/* mode 8 */
+#define CSDMACNT CSEQm_CIO_REG(8, 0x48)
+
+/* mode 8 */
+#define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D)
+
+#define DONELISTEND 0x10
+#define DONELISTSIZE_MASK 0x0F
+#define DONELISTSIZE_8ELEM 0x01
+#define DONELISTSIZE_16ELEM 0x02
+#define DONELISTSIZE_32ELEM 0x03
+#define DONELISTSIZE_64ELEM 0x04
+#define DONELISTSIZE_128ELEM 0x05
+#define DONELISTSIZE_256ELEM 0x06
+#define DONELISTSIZE_512ELEM 0x07
+#define DONELISTSIZE_1024ELEM 0x08
+#define DONELISTSIZE_2048ELEM 0x09
+#define DONELISTSIZE_4096ELEM 0x0A
+#define DONELISTSIZE_8192ELEM 0x0B
+#define DONELISTSIZE_16384ELEM 0x0C
+
+/* mode 8 */
+#define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E)
+
+/* mode 11 */
+#define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50)
+
+/* mode 11 */
+#define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52)
+
+/* mode 11 */
+#define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54)
+
+#define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60)
+
+#define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61)
+
+#define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62)
+
+#define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64)
+
+#define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68)
+
+/* mode 8, 32x32 bits, 128 bytes of mapped buffer */
+#define CSBUFFER CSEQm_CIO_REG(8, 0x80)
+
+#define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0)
+
+/* mode 0-8 */
+#define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0)
+
+/*
+ * CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC)
+ */
+#define CSEQ_RAM_REG_BASE_ADR 0xB8004000
+
+/*
+ * The common definitions below have the same address offset for all the Link
+ * sequencers.
+ */
+#define MODECTL 0x40
+
+#define DBGMODE 0x44
+
+#define CONTROL 0x48
+#define LEDTIMER 0x00010000
+#define LEDTIMERS_10us 0x00000000
+#define LEDTIMERS_1ms 0x00000800
+#define LEDTIMERS_100ms 0x00001000
+#define LEDMODE_TXRX 0x00000000
+#define LEDMODE_CONNECTED 0x00000200
+#define LEDPOL 0x00000100
+
+#define LSEQRAM 0x1000
+
+/*
+ * LmSEQ Host Registers, Address Range : (0x0000-0x3FFC)
+ */
+#define LSEQ0_HOST_REG_BASE_ADR 0xB8020000
+#define LSEQ1_HOST_REG_BASE_ADR 0xB8024000
+#define LSEQ2_HOST_REG_BASE_ADR 0xB8028000
+#define LSEQ3_HOST_REG_BASE_ADR 0xB802C000
+#define LSEQ4_HOST_REG_BASE_ADR 0xB8030000
+#define LSEQ5_HOST_REG_BASE_ADR 0xB8034000
+#define LSEQ6_HOST_REG_BASE_ADR 0xB8038000
+#define LSEQ7_HOST_REG_BASE_ADR 0xB803C000
+
+#define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2CTL)
+
+#define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2INT)
+
+#define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2INTEN)
+
+#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ DBGMODE)
+
+#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ CONTROL)
+
+#define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2BREAKADR01)
+
+#define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2BREAKADR23)
+
+#define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ MODECTL)
+
+#define LmAUTODISCI 0x08000000
+#define LmDSBLBITLT 0x04000000
+#define LmDSBLANTT 0x02000000
+#define LmDSBLCRTT 0x01000000
+#define LmDSBLCONT 0x00000100
+#define LmPRIMODE 0x00000080
+#define LmDSBLHOLD 0x00000040
+#define LmDISACK 0x00000020
+#define LmBLIND48 0x00000010
+#define LmRCVMODE_MASK 0x0000000C
+#define LmRCVMODE_PLD 0x00000000
+#define LmRCVMODE_HPC 0x00000004
+
+#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ DBGMODE)
+
+#define LmFRCPERR 0x80000000
+#define LmMEMSEL_MASK 0x30000000
+#define LmFRCRBPERR 0x00000000
+#define LmFRCTBPERR 0x10000000
+#define LmFRCSGBPERR 0x20000000
+#define LmFRCARBPERR 0x30000000
+#define LmRCVIDW 0x00080000
+#define LmINVDWERR 0x00040000
+#define LmRCVDISP 0x00004000
+#define LmDISPERR 0x00002000
+#define LmDSBLDSCR 0x00000800
+#define LmDSBLSCR 0x00000400
+#define LmFRCNAK 0x00000200
+#define LmFRCROFS 0x00000100
+#define LmFRCCRC 0x00000080
+#define LmFRMTYPE_MASK 0x00000070
+#define LmSG_DATA 0x00000000
+#define LmSG_COMMAND 0x00000010
+#define LmSG_TASK 0x00000020
+#define LmSG_TGTXFER 0x00000030
+#define LmSG_RESPONSE 0x00000040
+#define LmSG_IDENADDR 0x00000050
+#define LmSG_OPENADDR 0x00000060
+#define LmDISCRCGEN 0x00000008
+#define LmDISCRCCHK 0x00000004
+#define LmSSXMTFRM 0x00000002
+#define LmSSRCVFRM 0x00000001
+
+#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ CONTROL)
+
+#define LmSTEPXMTFRM 0x00000002
+#define LmSTEPRCVFRM 0x00000001
+
+#define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ BISTCTL0)
+
+#define ARBBISTEN 0x40000000
+#define ARBBISTDN 0x20000000 /* ro */
+#define ARBBISTFAIL 0x10000000 /* ro */
+#define TBBISTEN 0x00000400
+#define TBBISTDN 0x00000200 /* ro */
+#define TBBISTFAIL 0x00000100 /* ro */
+#define RBBISTEN 0x00000040
+#define RBBISTDN 0x00000020 /* ro */
+#define RBBISTFAIL 0x00000010 /* ro */
+#define SGBISTEN 0x00000004
+#define SGBISTDN 0x00000002 /* ro */
+#define SGBISTFAIL 0x00000001 /* ro */
+
+#define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) +\
+ BISTCTL1)
+
+#define LmRAMPAGE1 0x00000200
+#define LmRAMPAGE0 0x00000100
+#define LmIMEMBISTEN 0x00000040
+#define LmIMEMBISTDN 0x00000020 /* ro */
+#define LmIMEMBISTFAIL 0x00000010 /* ro */
+#define LmSCRBISTEN 0x00000004
+#define LmSCRBISTDN 0x00000002 /* ro */
+#define LmSCRBISTFAIL 0x00000001 /* ro */
+#define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0)
+#define LmRAMPAGE_LSHIFT 0x8
+
+#define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+ MAPPEDSCR)
+
+#define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+ LSEQRAM)
+
+/*
+ * LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC)
+ * 8 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define LmSEQ_CIOBUS_REG_BASE 0x2000
+
+#define LmSEQ_PHY_BASE(Mode, LinkNum) \
+ (LSEQ0_HOST_REG_BASE_ADR + \
+ (LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \
+ LmSEQ_CIOBUS_REG_BASE + \
+ ((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE))
+
+#define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \
+ (LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg))
+
+#define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR)
+
+#define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE)
+
+#define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG)
+
+#define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG)
+
+#define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL)
+
+#define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK)
+
+#define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1)
+
+#define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT)
+
+#define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM)
+
+#define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX)
+
+#define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX)
+
+#define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES)
+
+#define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS)
+
+#define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR)
+
+#define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR)
+
+#define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR)
+
+#define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE)
+
+#define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR)
+
+#define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR)
+
+#define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR)
+
+#define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR)
+
+#define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT)
+
+#define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE)
+
+#define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \
+ MnSCRATCHPAGE)
+
+#define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28)
+
+#define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30)
+
+#define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34)
+
+#define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38)
+
+#define CTXMEMSIZE 0x80000000 /* ro */
+#define LmACKREQ 0x08000000
+#define LmNAKREQ 0x04000000
+#define LmMnXMTERR 0x02000000
+#define LmM5OOBSVC 0x01000000
+#define LmHWTINT 0x00800000
+#define LmMnCTXDONE 0x00100000
+#define LmM2REQMBXF 0x00080000
+#define LmM2RSPMBXE 0x00040000
+#define LmMnDMAERR 0x00020000
+#define LmRCVPRIM 0x00010000
+#define LmRCVERR 0x00008000
+#define LmADDRRCV 0x00004000
+#define LmMnHDRMISS 0x00002000
+#define LmMnWAITSCB 0x00001000
+#define LmMnRLSSCB 0x00000800
+#define LmMnSAVECTX 0x00000400
+#define LmMnFETCHSG 0x00000200
+#define LmMnLOADCTX 0x00000100
+#define LmMnCFGICL 0x00000080
+#define LmMnCFGSATA 0x00000040
+#define LmMnCFGEXPSATA 0x00000020
+#define LmMnCFGCMPLT 0x00000010
+#define LmMnCFGRBUF 0x00000008
+#define LmMnSAVETTR 0x00000004
+#define LmMnCFGRDAT 0x00000002
+#define LmMnCFGHDR 0x00000001
+
+#define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C)
+
+#define EN_LmACKREQ 0x08000000
+#define EN_LmNAKREQ 0x04000000
+#define EN_LmMnXMTERR 0x02000000
+#define EN_LmM5OOBSVC 0x01000000
+#define EN_LmHWTINT 0x00800000
+#define EN_LmMnCTXDONE 0x00100000
+#define EN_LmM2REQMBXF 0x00080000
+#define EN_LmM2RSPMBXE 0x00040000
+#define EN_LmMnDMAERR 0x00020000
+#define EN_LmRCVPRIM 0x00010000
+#define EN_LmRCVERR 0x00008000
+#define EN_LmADDRRCV 0x00004000
+#define EN_LmMnHDRMISS 0x00002000
+#define EN_LmMnWAITSCB 0x00001000
+#define EN_LmMnRLSSCB 0x00000800
+#define EN_LmMnSAVECTX 0x00000400
+#define EN_LmMnFETCHSG 0x00000200
+#define EN_LmMnLOADCTX 0x00000100
+#define EN_LmMnCFGICL 0x00000080
+#define EN_LmMnCFGSATA 0x00000040
+#define EN_LmMnCFGEXPSATA 0x00000020
+#define EN_LmMnCFGCMPLT 0x00000010
+#define EN_LmMnCFGRBUF 0x00000008
+#define EN_LmMnSAVETTR 0x00000004
+#define EN_LmMnCFGRDAT 0x00000002
+#define EN_LmMnCFGHDR 0x00000001
+
+#define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \
+ EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \
+ EN_LmMnCFGHDR | EN_LmRCVERR | \
+ EN_LmADDRRCV | EN_LmMnHDRMISS | \
+ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+ EN_LmHWTINT | EN_LmMnCTXDONE | \
+ EN_LmRCVPRIM | EN_LmMnCFGSATA | \
+ EN_LmMnCFGEXPSATA | EN_LmMnDMAERR)
+
+#define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \
+ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+ EN_LmMnXMTERR | EN_LmHWTINT | \
+ EN_LmMnCTXDONE | EN_LmRCVPRIM | \
+ EN_LmRCVERR | EN_LmMnDMAERR)
+
+#define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \
+ EN_LmM2REQMBXF | EN_LmRCVPRIM | \
+ EN_LmRCVERR)
+
+#define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \
+ EN_LmHWTINT | EN_LmRCVPRIM | \
+ EN_LmRCVERR)
+
+#define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40)
+
+#define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44)
+
+#define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45)
+
+#define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46)
+
+#define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47)
+
+#define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48)
+
+#define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48)
+#define SAS_ALIGN_DEFAULT 0xFF
+
+#define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49)
+
+#define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49)
+#define STP_ALIGN_DEFAULT 0x1F
+
+#define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A)
+
+#define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A)
+
+#define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B)
+
+#define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B)
+
+#define LmDISALIGN 0x20
+#define LmROTSTPALIGN 0x10
+#define LmSTPALIGN 0x08
+#define LmROTNOTIFY 0x04
+#define LmDUALALIGN 0x02
+#define LmROTALIGN 0x01
+
+#define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C)
+
+#define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C)
+
+#define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E)
+
+#define LmMnBUFPERR 0x01
+
+/* mode 0-1 */
+#define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59)
+
+#define LmMnXFRLVL_128 0x05
+#define LmMnXFRLVL_256 0x04
+#define LmMnXFRLVL_512 0x03
+#define LmMnXFRLVL_1024 0x02
+#define LmMnXFRLVL_1536 0x01
+#define LmMnXFRLVL_2048 0x00
+
+ /* mode 0-1 */
+#define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A)
+
+#define LmMnRESETSG 0x04
+#define LmMnSTOPSG 0x02
+#define LmMnSTARTSG 0x01
+
+/* mode 0-1 */
+#define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B)
+
+/* mode 0-1 */
+#define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C)
+
+#define LmMnFLUSH 0x40 /* wo */
+#define LmMnRLSRTRY 0x20 /* wo */
+#define LmMnDISCARD 0x10 /* wo */
+#define LmMnRESETDAT 0x08 /* wo */
+#define LmMnSUSDAT 0x04 /* wo */
+#define LmMnSTOPDAT 0x02 /* wo */
+#define LmMnSTARTDAT 0x01 /* wo */
+
+/* mode 0-1 */
+#define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D)
+
+#define LmMnDPEMPTY 0x80
+#define LmMnFLUSHING 0x40
+#define LmMnDDMAREQ 0x20
+#define LmMnHDMAREQ 0x10
+#define LmMnDATFREE 0x08
+#define LmMnDATSUS 0x04
+#define LmMnDATACT 0x02
+#define LmMnDATEN 0x01
+
+/* mode 0-1 */
+#define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E)
+
+#define LmMnDMATYPE_NORMAL 0x0000
+#define LmMnDMATYPE_HOST_ONLY_TX 0x0001
+#define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002
+#define LmMnDMATYPE_INVALID 0x0003
+#define LmMnDMATYPE_MASK 0x0003
+
+#define LmMnDMAWRAP 0x0004
+#define LmMnBITBUCKET 0x0008
+#define LmMnDISHDR 0x0010
+#define LmMnSTPCRC 0x0020
+#define LmXTEST 0x0040
+#define LmMnDISCRC 0x0080
+#define LmMnENINTLK 0x0100
+#define LmMnADDRFRM 0x0400
+#define LmMnENXMTCRC 0x0800
+
+/* mode 0-1 */
+#define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70)
+
+/* mode 0-1 */
+#define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B)
+#define LmMnDPSEL_MASK 0x07
+#define LmMnEOLPRE 0x40
+#define LmMnEOSPRE 0x80
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Receive Mode n = 0 */
+#define LmMnHRADDR 0x00
+#define LmMnHBYTECNT 0x01
+#define LmMnHREWIND 0x02
+#define LmMnDWADDR 0x03
+#define LmMnDSPACECNT 0x04
+#define LmMnDFRMSIZE 0x05
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Transmit Mode n = 1 */
+#define LmMnHWADDR 0x00
+#define LmMnHSPACECNT 0x01
+/* #define LmMnHREWIND 0x02 */
+#define LmMnDRADDR 0x03
+#define LmMnDBYTECNT 0x04
+/* #define LmMnDFRMSIZE 0x05 */
+
+/* mode 0-1 */
+#define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78)
+#define LmMnDPACC_MASK 0x00FFFFFF
+
+/* mode 0-1 */
+#define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D)
+
+#define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80)
+#define LmPRMSTAT0BYTE0 0x80
+#define LmPRMSTAT0BYTE1 0x81
+#define LmPRMSTAT0BYTE2 0x82
+#define LmPRMSTAT0BYTE3 0x83
+
+#define LmFRAMERCVD 0x80000000
+#define LmXFRRDYRCVD 0x40000000
+#define LmUNKNOWNP 0x20000000
+#define LmBREAK 0x10000000
+#define LmDONE 0x08000000
+#define LmOPENACPT 0x04000000
+#define LmOPENRJCT 0x02000000
+#define LmOPENRTRY 0x01000000
+#define LmCLOSERV1 0x00800000
+#define LmCLOSERV0 0x00400000
+#define LmCLOSENORM 0x00200000
+#define LmCLOSECLAF 0x00100000
+#define LmNOTIFYRV2 0x00080000
+#define LmNOTIFYRV1 0x00040000
+#define LmNOTIFYRV0 0x00020000
+#define LmNOTIFYSPIN 0x00010000
+#define LmBROADRV4 0x00008000
+#define LmBROADRV3 0x00004000
+#define LmBROADRV2 0x00002000
+#define LmBROADRV1 0x00001000
+#define LmBROADSES 0x00000800
+#define LmBROADRVCH1 0x00000400
+#define LmBROADRVCH0 0x00000200
+#define LmBROADCH 0x00000100
+#define LmAIPRVWP 0x00000080
+#define LmAIPWP 0x00000040
+#define LmAIPWD 0x00000020
+#define LmAIPWC 0x00000010
+#define LmAIPRV2 0x00000008
+#define LmAIPRV1 0x00000004
+#define LmAIPRV0 0x00000002
+#define LmAIPNRML 0x00000001
+
+#define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \
+ LmBROADRVCH1)
+
+#define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84)
+#define LmPRMSTAT1BYTE0 0x84
+#define LmPRMSTAT1BYTE1 0x85
+#define LmPRMSTAT1BYTE2 0x86
+#define LmPRMSTAT1BYTE3 0x87
+
+#define LmFRMRCVDSTAT 0x80000000
+#define LmBREAK_DET 0x04000000
+#define LmCLOSE_DET 0x02000000
+#define LmDONE_DET 0x01000000
+#define LmXRDY 0x00040000
+#define LmSYNCSRST 0x00020000
+#define LmSYNC 0x00010000
+#define LmXHOLD 0x00008000
+#define LmRRDY 0x00004000
+#define LmHOLD 0x00002000
+#define LmROK 0x00001000
+#define LmRIP 0x00000800
+#define LmCRBLK 0x00000400
+#define LmACK 0x00000200
+#define LmNAK 0x00000100
+#define LmHARDRST 0x00000080
+#define LmERROR 0x00000040
+#define LmRERR 0x00000020
+#define LmPMREQP 0x00000010
+#define LmPMREQS 0x00000008
+#define LmPMACK 0x00000004
+#define LmPMNAK 0x00000002
+#define LmDMAT 0x00000001
+
+/* mode 1 */
+#define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E)
+#define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93)
+
+/* mode 0 */
+#define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0)
+
+#define LmACRCERR 0x00000800
+#define LmPHYOVRN 0x00000400
+#define LmOBOVRN 0x00000200
+#define LmMnZERODATA 0x00000100
+#define LmSATAINTLK 0x00000080
+#define LmMnCRCERR 0x00000020
+#define LmRRDYOVRN 0x00000010
+#define LmMISSSOAF 0x00000008
+#define LmMISSSOF 0x00000004
+#define LmMISSEOAF 0x00000002
+#define LmMISSEOF 0x00000001
+
+#define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4)
+
+#define EN_LmACRCERR 0x00000800
+#define EN_LmPHYOVRN 0x00000400
+#define EN_LmOBOVRN 0x00000200
+#define EN_LmMnZERODATA 0x00000100
+#define EN_LmSATAINTLK 0x00000080
+#define EN_LmFRMBAD 0x00000040
+#define EN_LmMnCRCERR 0x00000020
+#define EN_LmRRDYOVRN 0x00000010
+#define EN_LmMISSSOAF 0x00000008
+#define EN_LmMISSSOF 0x00000004
+#define EN_LmMISSEOAF 0x00000002
+#define EN_LmMISSEOF 0x00000001
+
+#define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \
+ EN_LmRRDYOVRN | EN_LmMISSSOF | \
+ EN_LmMISSEOAF | EN_LmMISSEOF | \
+ EN_LmACRCERR | LmPHYOVRN | \
+ EN_LmOBOVRN | EN_LmMnZERODATA)
+
+#define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5)
+
+#define EN_LmDONETO 0x80
+#define EN_LmINVDISP 0x40
+#define EN_LmINVDW 0x20
+#define EN_LmDWSEVENT 0x08
+#define EN_LmCRTTTO 0x04
+#define EN_LmANTTTO 0x02
+#define EN_LmBITLTTO 0x01
+
+#define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \
+ EN_LmDWSEVENT | EN_LmCRTTTO | \
+ EN_LmANTTTO | EN_LmDONETO | \
+ EN_LmBITLTTO)
+
+#define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7)
+
+#define LmDONETO 0x80
+#define LmINVDISP 0x40
+#define LmINVDW 0x20
+#define LmDWSEVENT 0x08
+#define LmCRTTTO 0x04
+#define LmANTTTO 0x02
+#define LmBITLTTO 0x01
+
+#define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8)
+#define LmDATABUFADR_MASK 0x0FFF
+
+#define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA)
+
+#define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0)
+
+#define EN_LmUNKNOWNP 0x20000000
+#define EN_LmBREAK 0x10000000
+#define EN_LmDONE 0x08000000
+#define EN_LmOPENACPT 0x04000000
+#define EN_LmOPENRJCT 0x02000000
+#define EN_LmOPENRTRY 0x01000000
+#define EN_LmCLOSERV1 0x00800000
+#define EN_LmCLOSERV0 0x00400000
+#define EN_LmCLOSENORM 0x00200000
+#define EN_LmCLOSECLAF 0x00100000
+#define EN_LmNOTIFYRV2 0x00080000
+#define EN_LmNOTIFYRV1 0x00040000
+#define EN_LmNOTIFYRV0 0x00020000
+#define EN_LmNOTIFYSPIN 0x00010000
+#define EN_LmBROADRV4 0x00008000
+#define EN_LmBROADRV3 0x00004000
+#define EN_LmBROADRV2 0x00002000
+#define EN_LmBROADRV1 0x00001000
+#define EN_LmBROADRV0 0x00000800
+#define EN_LmBROADRVCH1 0x00000400
+#define EN_LmBROADRVCH0 0x00000200
+#define EN_LmBROADCH 0x00000100
+#define EN_LmAIPRVWP 0x00000080
+#define EN_LmAIPWP 0x00000040
+#define EN_LmAIPWD 0x00000020
+#define EN_LmAIPWC 0x00000010
+#define EN_LmAIPRV2 0x00000008
+#define EN_LmAIPRV1 0x00000004
+#define EN_LmAIPRV0 0x00000002
+#define EN_LmAIPNRML 0x00000001
+
+#define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \
+ EN_LmDONE | EN_LmOPENACPT | \
+ EN_LmOPENRJCT | EN_LmOPENRTRY | \
+ EN_LmCLOSERV1 | EN_LmCLOSERV0 | \
+ EN_LmCLOSENORM | EN_LmCLOSECLAF | \
+ EN_LmBROADRV4 | EN_LmBROADRV3 | \
+ EN_LmBROADRV2 | EN_LmBROADRV1 | \
+ EN_LmBROADRV0 | EN_LmBROADRVCH1 | \
+ EN_LmBROADRVCH0 | EN_LmBROADCH | \
+ EN_LmAIPRVWP | EN_LmAIPWP | \
+ EN_LmAIPWD | EN_LmAIPWC | \
+ EN_LmAIPRV2 | EN_LmAIPRV1 | \
+ EN_LmAIPRV0 | EN_LmAIPNRML)
+
+#define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4)
+
+#define EN_LmXRDY 0x00040000
+#define EN_LmSYNCSRST 0x00020000
+#define EN_LmSYNC 0x00010000
+#define EN_LmXHOLD 0x00008000
+#define EN_LmRRDY 0x00004000
+#define EN_LmHOLD 0x00002000
+#define EN_LmROK 0x00001000
+#define EN_LmRIP 0x00000800
+#define EN_LmCRBLK 0x00000400
+#define EN_LmACK 0x00000200
+#define EN_LmNAK 0x00000100
+#define EN_LmHARDRST 0x00000080
+#define EN_LmERROR 0x00000040
+#define EN_LmRERR 0x00000020
+#define EN_LmPMREQP 0x00000010
+#define EN_LmPMREQS 0x00000008
+#define EN_LmPMACK 0x00000004
+#define EN_LmPMNAK 0x00000002
+#define EN_LmDMAT 0x00000001
+
+#define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \
+ EN_LmSYNCSRST | \
+ EN_LmPMREQP | EN_LmPMREQS | \
+ EN_LmPMACK | EN_LmPMNAK)
+
+#define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8)
+
+#define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC)
+
+#define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0)
+
+
+/*
+ * LmSEQ CIO Bus Mode 3 Register.
+ * Mode 3: Configuration and Setup, IOP Context SCB.
+ */
+#define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48)
+
+#define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90)
+
+#define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92)
+
+#define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94)
+
+#define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96)
+
+#define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98)
+
+#define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A)
+
+#define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C)
+
+#define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E)
+
+#define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4)
+
+#define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6)
+
+#define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0)
+
+#define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4)
+
+#define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2)
+
+#define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8)
+
+
+/*
+ * LmSEQ CIO Bus Mode 5 Registers.
+ * Mode 5: Phy/OOB Control and Status.
+ */
+#define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg))
+
+#define OOB_BFLTR 0x100
+
+#define BFLTR_THR_MASK 0xF0
+#define BFLTR_TC_MASK 0x0F
+
+#define OOB_INIT_MIN 0x102
+
+#define OOB_INIT_MAX 0x104
+
+#define OOB_INIT_NEG 0x106
+
+#define OOB_SAS_MIN 0x108
+
+#define OOB_SAS_MAX 0x10A
+
+#define OOB_SAS_NEG 0x10C
+
+#define OOB_WAKE_MIN 0x10E
+
+#define OOB_WAKE_MAX 0x110
+
+#define OOB_WAKE_NEG 0x112
+
+#define OOB_IDLE_MAX 0x114
+
+#define OOB_BURST_MAX 0x116
+
+#define OOB_DATA_KBITS 0x126
+
+#define OOB_ALIGN_0_DATA 0x12C
+
+#define OOB_ALIGN_1_DATA 0x130
+
+#define D10_2_DATA_k 0x00
+#define SYNC_DATA_k 0x02
+#define ALIGN_1_DATA_k 0x04
+#define ALIGN_0_DATA_k 0x08
+#define BURST_DATA_k 0x10
+
+#define OOB_PHY_RESET_COUNT 0x13C
+
+#define OOB_SIG_GEN 0x140
+
+#define START_OOB 0x80
+#define START_DWS 0x40
+#define ALIGN_CNT3 0x30
+#define ALIGN_CNT2 0x20
+#define ALIGN_CNT1 0x10
+#define ALIGN_CNT4 0x00
+#define STOP_DWS 0x08
+#define SEND_COMSAS 0x04
+#define SEND_COMINIT 0x02
+#define SEND_COMWAKE 0x01
+
+#define OOB_XMIT 0x141
+
+#define TX_ENABLE 0x80
+#define XMIT_OOB_BURST 0x10
+#define XMIT_D10_2 0x08
+#define XMIT_SYNC 0x04
+#define XMIT_ALIGN_1 0x02
+#define XMIT_ALIGN_0 0x01
+
+#define FUNCTION_MASK 0x142
+
+#define SAS_MODE_DIS 0x80
+#define SATA_MODE_DIS 0x40
+#define SPINUP_HOLD_DIS 0x20
+#define HOT_PLUG_DIS 0x10
+#define SATA_PS_DIS 0x08
+#define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS)
+
+#define OOB_MODE 0x143
+
+#define SAS_MODE 0x80
+#define SATA_MODE 0x40
+#define SLOW_CLK 0x20
+#define FORCE_XMIT_15 0x08
+#define PHY_SPEED_60 0x04
+#define PHY_SPEED_30 0x02
+#define PHY_SPEED_15 0x01
+
+#define CURRENT_STATUS 0x144
+
+#define CURRENT_OOB_DONE 0x80
+#define CURRENT_LOSS_OF_SIGNAL 0x40
+#define CURRENT_SPINUP_HOLD 0x20
+#define CURRENT_HOT_PLUG_CNCT 0x10
+#define CURRENT_GTO_TIMEOUT 0x08
+#define CURRENT_OOB_TIMEOUT 0x04
+#define CURRENT_DEVICE_PRESENT 0x02
+#define CURRENT_OOB_ERROR 0x01
+
+#define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_GTO_TIMEOUT)
+
+#define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_OOB_ERROR)
+
+#define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \
+ CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_DEVICE_PRESENT)
+
+#define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \
+ CURRENT_DEVICE_PRESENT)
+
+#define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL
+
+#define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \
+ CURRENT_LOSS_OF_SIGNAL | \
+ CURRENT_SPINUP_HOLD | \
+ CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_GTO_TIMEOUT | \
+ CURRENT_DEVICE_PRESENT | \
+ CURRENT_OOB_ERROR )
+
+#define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \
+ CURRENT_GTO_TIMEOUT | \
+ CURRENT_OOB_TIMEOUT | \
+ CURRENT_OOB_ERROR )
+
+#define SPEED_MASK 0x145
+
+#define SATA_SPEED_30_DIS 0x10
+#define SATA_SPEED_15_DIS 0x08
+#define SAS_SPEED_60_DIS 0x04
+#define SAS_SPEED_30_DIS 0x02
+#define SAS_SPEED_15_DIS 0x01
+#define SAS_SPEED_MASK_DEFAULT 0x00
+
+#define OOB_TIMER_ENABLE 0x14D
+
+#define HOT_PLUG_EN 0x80
+#define RCD_EN 0x40
+#define COMTIMER_EN 0x20
+#define SNTT_EN 0x10
+#define SNLT_EN 0x04
+#define SNWT_EN 0x02
+#define ALIGN_EN 0x01
+
+#define OOB_STATUS 0x14E
+
+#define OOB_DONE 0x80
+#define LOSS_OF_SIGNAL 0x40 /* ro */
+#define SPINUP_HOLD 0x20
+#define HOT_PLUG_CNCT 0x10 /* ro */
+#define GTO_TIMEOUT 0x08 /* ro */
+#define OOB_TIMEOUT 0x04 /* ro */
+#define DEVICE_PRESENT 0x02 /* ro */
+#define OOB_ERROR 0x01 /* ro */
+
+#define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \
+ OOB_TIMEOUT | OOB_ERROR)
+
+#define OOB_STATUS_CLEAR 0x14F
+
+#define OOB_DONE_CLR 0x80
+#define LOSS_OF_SIGNAL_CLR 0x40
+#define SPINUP_HOLD_CLR 0x20
+#define HOT_PLUG_CNCT_CLR 0x10
+#define GTO_TIMEOUT_CLR 0x08
+#define OOB_TIMEOUT_CLR 0x04
+#define OOB_ERROR_CLR 0x01
+
+#define HOT_PLUG_DELAY 0x150
+/* In 5 ms units. 20 = 100 ms. */
+#define HOTPLUG_DELAY_TIMEOUT 20
+
+
+#define INT_ENABLE_2 0x15A
+
+#define OOB_DONE_EN 0x80
+#define LOSS_OF_SIGNAL_EN 0x40
+#define SPINUP_HOLD_EN 0x20
+#define HOT_PLUG_CNCT_EN 0x10
+#define GTO_TIMEOUT_EN 0x08
+#define OOB_TIMEOUT_EN 0x04
+#define DEVICE_PRESENT_EN 0x02
+#define OOB_ERROR_EN 0x01
+
+#define PHY_CONTROL_0 0x160
+
+#define PHY_LOWPWREN_TX 0x80
+#define PHY_LOWPWREN_RX 0x40
+#define SPARE_REG_160_B5 0x20
+#define OFFSET_CANCEL_RX 0x10
+
+/* bits 3:2 */
+#define PHY_RXCOMCENTER_60V 0x00
+#define PHY_RXCOMCENTER_70V 0x04
+#define PHY_RXCOMCENTER_80V 0x08
+#define PHY_RXCOMCENTER_90V 0x0C
+#define PHY_RXCOMCENTER_MASK 0x0C
+
+#define PHY_RESET 0x02
+#define SAS_DEFAULT_SEL 0x01
+
+#define PHY_CONTROL_1 0x161
+
+/* bits 2:0 */
+#define SATA_PHY_DETLEVEL_50mv 0x00
+#define SATA_PHY_DETLEVEL_75mv 0x01
+#define SATA_PHY_DETLEVEL_100mv 0x02
+#define SATA_PHY_DETLEVEL_125mv 0x03
+#define SATA_PHY_DETLEVEL_150mv 0x04
+#define SATA_PHY_DETLEVEL_175mv 0x05
+#define SATA_PHY_DETLEVEL_200mv 0x06
+#define SATA_PHY_DETLEVEL_225mv 0x07
+#define SATA_PHY_DETLEVEL_MASK 0x07
+
+/* bits 5:3 */
+#define SAS_PHY_DETLEVEL_50mv 0x00
+#define SAS_PHY_DETLEVEL_75mv 0x08
+#define SAS_PHY_DETLEVEL_100mv 0x10
+#define SAS_PHY_DETLEVEL_125mv 0x11
+#define SAS_PHY_DETLEVEL_150mv 0x20
+#define SAS_PHY_DETLEVEL_175mv 0x21
+#define SAS_PHY_DETLEVEL_200mv 0x30
+#define SAS_PHY_DETLEVEL_225mv 0x31
+#define SAS_PHY_DETLEVEL_MASK 0x38
+
+#define PHY_CONTROL_2 0x162
+
+/* bits 7:5 */
+#define SATA_PHY_DRV_400mv 0x00
+#define SATA_PHY_DRV_450mv 0x20
+#define SATA_PHY_DRV_500mv 0x40
+#define SATA_PHY_DRV_550mv 0x60
+#define SATA_PHY_DRV_600mv 0x80
+#define SATA_PHY_DRV_650mv 0xA0
+#define SATA_PHY_DRV_725mv 0xC0
+#define SATA_PHY_DRV_800mv 0xE0
+#define SATA_PHY_DRV_MASK 0xE0
+
+/* bits 4:3 */
+#define SATA_PREEMP_0 0x00
+#define SATA_PREEMP_1 0x08
+#define SATA_PREEMP_2 0x10
+#define SATA_PREEMP_3 0x18
+#define SATA_PREEMP_MASK 0x18
+
+#define SATA_CMSH1P5 0x04
+
+/* bits 1:0 */
+#define SATA_SLEW_0 0x00
+#define SATA_SLEW_1 0x01
+#define SATA_SLEW_2 0x02
+#define SATA_SLEW_3 0x03
+#define SATA_SLEW_MASK 0x03
+
+#define PHY_CONTROL_3 0x163
+
+/* bits 7:5 */
+#define SAS_PHY_DRV_400mv 0x00
+#define SAS_PHY_DRV_450mv 0x20
+#define SAS_PHY_DRV_500mv 0x40
+#define SAS_PHY_DRV_550mv 0x60
+#define SAS_PHY_DRV_600mv 0x80
+#define SAS_PHY_DRV_650mv 0xA0
+#define SAS_PHY_DRV_725mv 0xC0
+#define SAS_PHY_DRV_800mv 0xE0
+#define SAS_PHY_DRV_MASK 0xE0
+
+/* bits 4:3 */
+#define SAS_PREEMP_0 0x00
+#define SAS_PREEMP_1 0x08
+#define SAS_PREEMP_2 0x10
+#define SAS_PREEMP_3 0x18
+#define SAS_PREEMP_MASK 0x18
+
+#define SAS_CMSH1P5 0x04
+
+/* bits 1:0 */
+#define SAS_SLEW_0 0x00
+#define SAS_SLEW_1 0x01
+#define SAS_SLEW_2 0x02
+#define SAS_SLEW_3 0x03
+#define SAS_SLEW_MASK 0x03
+
+#define PHY_CONTROL_4 0x168
+
+#define PHY_DONE_CAL_TX 0x80
+#define PHY_DONE_CAL_RX 0x40
+#define RX_TERM_LOAD_DIS 0x20
+#define TX_TERM_LOAD_DIS 0x10
+#define AUTO_TERM_CAL_DIS 0x08
+#define PHY_SIGDET_FLTR_EN 0x04
+#define OSC_FREQ 0x02
+#define PHY_START_CAL 0x01
+
+/*
+ * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ */
+#define PCIX_REG_BASE_ADR 0xB8040000
+
+#define PCIC_VENDOR_ID 0x00
+
+#define PCIC_DEVICE_ID 0x02
+
+#define PCIC_COMMAND 0x04
+
+#define INT_DIS 0x0400
+#define FBB_EN 0x0200 /* ro */
+#define SERR_EN 0x0100
+#define STEP_EN 0x0080 /* ro */
+#define PERR_EN 0x0040
+#define VGA_EN 0x0020 /* ro */
+#define MWI_EN 0x0010
+#define SPC_EN 0x0008
+#define MST_EN 0x0004
+#define MEM_EN 0x0002
+#define IO_EN 0x0001
+
+#define PCIC_STATUS 0x06
+
+#define PERR_DET 0x8000
+#define SERR_GEN 0x4000
+#define MABT_DET 0x2000
+#define TABT_DET 0x1000
+#define TABT_GEN 0x0800
+#define DPERR_DET 0x0100
+#define CAP_LIST 0x0010
+#define INT_STAT 0x0008
+
+#define PCIC_DEVREV_ID 0x08
+
+#define PCIC_CLASS_CODE 0x09
+
+#define PCIC_CACHELINE_SIZE 0x0C
+
+#define PCIC_MBAR0 0x10
+
+#define PCIC_MBAR0_OFFSET 0
+
+#define PCIC_MBAR1 0x18
+
+#define PCIC_MBAR1_OFFSET 2
+
+#define PCIC_IOBAR 0x20
+
+#define PCIC_IOBAR_OFFSET 4
+
+#define PCIC_SUBVENDOR_ID 0x2C
+
+#define PCIC_SUBSYTEM_ID 0x2E
+
+#define PCIX_STATUS 0x44
+#define RCV_SCE 0x20000000
+#define UNEXP_SC 0x00080000
+#define SC_DISCARD 0x00040000
+
+#define ECC_CTRL_STAT 0x48
+#define UNCOR_ECCERR 0x00000008
+
+#define PCIC_PM_CSR 0x5C
+
+#define PWR_STATE_D0 0
+#define PWR_STATE_D1 1 /* not supported */
+#define PWR_STATE_D2 2 /* not supported */
+#define PWR_STATE_D3 3
+
+#define PCIC_BASE1 0x6C /* internal use only */
+
+#define BASE1_RSVD 0xFFFFFFF8
+
+#define PCIC_BASEA 0x70 /* internal use only */
+
+#define BASEA_RSVD 0xFFFFFFC0
+#define BASEA_START 0
+
+#define PCIC_BASEB 0x74 /* internal use only */
+
+#define BASEB_RSVD 0xFFFFFF80
+#define BASEB_IOMAP_MASK 0x7F
+#define BASEB_START 0x80
+
+#define PCIC_BASEC 0x78 /* internal use only */
+
+#define BASEC_RSVD 0xFFFFFFFC
+#define BASEC_MASK 0x03
+#define BASEC_START 0x58
+
+#define PCIC_MBAR_KEY 0x7C /* internal use only */
+
+#define MBAR_KEY_MASK 0xFFFFFFFF
+
+#define PCIC_HSTPCIX_CNTRL 0xA0
+
+#define REWIND_DIS 0x0800
+#define SC_TMR_DIS 0x04000000
+
+#define PCIC_MBAR0_MASK 0xA8
+#define PCIC_MBAR0_SIZE_MASK 0x1FFFE000
+#define PCIC_MBAR0_SIZE_SHIFT 13
+#define PCIC_MBAR0_SIZE(val) \
+ (((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT)
+
+#define PCIC_FLASH_MBAR 0xB8
+
+#define PCIC_INTRPT_STAT 0xD4
+
+#define PCIC_TP_CTRL 0xFC
+
+/*
+ * EXSI Registers, Addresss Range: (0x00-0xFC)
+ */
+#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
+
+#define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00)
+
+#define OCMINITIALIZED 0x80000000
+#define ASIEN 0x00400000
+#define HCMODE 0x00200000
+#define PCIDEF 0x00100000
+#define COMSTOCK 0x00080000
+#define SEEPROMEND 0x00040000
+#define MSTTIMEN 0x00020000
+#define XREGEX 0x00000200
+#define NVRAMW 0x00000100
+#define NVRAMEX 0x00000080
+#define SRAMW 0x00000040
+#define SRAMEX 0x00000020
+#define FLASHW 0x00000010
+#define FLASHEX 0x00000008
+#define SEEPROMCFG 0x00000004
+#define SEEPROMTYP 0x00000002
+#define SEEPROMEX 0x00000001
+
+
+#define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04)
+
+#define MODINT_EN 0x00000001
+
+
+#define PMSTATR (EXSI_REG_BASE_ADR + 0x10)
+
+#define FLASHRST 0x00000002
+#define FLASHRDY 0x00000001
+
+
+#define FLCNFGR (EXSI_REG_BASE_ADR + 0x14)
+
+#define FLWEH_MASK 0x30000000
+#define FLWESU_MASK 0x0C000000
+#define FLWEPW_MASK 0x03F00000
+#define FLOEH_MASK 0x000C0000
+#define FLOESU_MASK 0x00030000
+#define FLOEPW_MASK 0x0000FC00
+#define FLCSH_MASK 0x00000300
+#define FLCSSU_MASK 0x000000C0
+#define FLCSPW_MASK 0x0000003F
+
+#define SRCNFGR (EXSI_REG_BASE_ADR + 0x18)
+
+#define SRWEH_MASK 0x30000000
+#define SRWESU_MASK 0x0C000000
+#define SRWEPW_MASK 0x03F00000
+
+#define SROEH_MASK 0x000C0000
+#define SROESU_MASK 0x00030000
+#define SROEPW_MASK 0x0000FC00
+#define SRCSH_MASK 0x00000300
+#define SRCSSU_MASK 0x000000C0
+#define SRCSPW_MASK 0x0000003F
+
+#define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C)
+
+#define NVWEH_MASK 0x30000000
+#define NVWESU_MASK 0x0C000000
+#define NVWEPW_MASK 0x03F00000
+#define NVOEH_MASK 0x000C0000
+#define NVOESU_MASK 0x00030000
+#define NVOEPW_MASK 0x0000FC00
+#define NVCSH_MASK 0x00000300
+#define NVCSSU_MASK 0x000000C0
+#define NVCSPW_MASK 0x0000003F
+
+#define XRCNFGR (EXSI_REG_BASE_ADR + 0x20)
+
+#define XRWEH_MASK 0x30000000
+#define XRWESU_MASK 0x0C000000
+#define XRWEPW_MASK 0x03F00000
+#define XROEH_MASK 0x000C0000
+#define XROESU_MASK 0x00030000
+#define XROEPW_MASK 0x0000FC00
+#define XRCSH_MASK 0x00000300
+#define XRCSSU_MASK 0x000000C0
+#define XRCSPW_MASK 0x0000003F
+
+#define XREGADDR (EXSI_REG_BASE_ADR + 0x24)
+
+#define XRADDRINCEN 0x80000000
+#define XREGADD_MASK 0x007FFFFF
+
+
+#define XREGDATAR (EXSI_REG_BASE_ADR + 0x28)
+
+#define XREGDATA_MASK 0x0000FFFF
+
+#define GPIOOER (EXSI_REG_BASE_ADR + 0x40)
+
+#define GPIOODENR (EXSI_REG_BASE_ADR + 0x44)
+
+#define GPIOINVR (EXSI_REG_BASE_ADR + 0x48)
+
+#define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C)
+
+#define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50)
+
+#define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54)
+
+#define GPIO_EXTSRC 0x00000001
+
+#define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0)
+
+#define SXFERDONE 0x00000100
+#define SXFERCNT_MASK 0x000000E0
+#define SCMDTYP_MASK 0x0000001C
+#define SXFERSTART 0x00000002
+#define SXFEREN 0x00000001
+
+#define SRATER (EXSI_REG_BASE_ADR + 0xA4)
+
+#define SADDRR (EXSI_REG_BASE_ADR + 0xA8)
+
+#define SADDR_MASK 0x0000FFFF
+
+#define SDATAOR (EXSI_REG_BASE_ADR + 0xAC)
+
+#define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC)
+#define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD)
+#define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE)
+#define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF)
+
+#define SDATAIR (EXSI_REG_BASE_ADR + 0xB0)
+
+#define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0)
+#define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1)
+#define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2)
+#define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3)
+
+#define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0)
+#define ASIFMTERR 0x00000400
+#define ASISEECHKERR 0x00000200
+#define ASIERR 0x00000100
+
+#define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4)
+#define CHECKSUM_MASK 0x0000FFFF
+
+#define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8)
+#define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC)
+#define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0)
+#define CPI2ASIBYTECNT_MASK 0x00070000
+#define CPI2ASIBYTEEN_MASK 0x0000F000
+#define CPI2ASITARGERR_MASK 0x00000F00
+#define CPI2ASITARGMID_MASK 0x000000F0
+#define CPI2ASIMSTERR_MASK 0x0000000F
+
+/*
+ * XSRAM, External SRAM (DWord and any BE pattern accessible)
+ */
+#define XSRAM_REG_BASE_ADDR 0xB8100000
+#define XSRAM_SIZE 0x100000
+
+/*
+ * NVRAM Registers, Address Range: (0x00000 - 0x3FFFF).
+ */
+#define NVRAM_REG_BASE_ADR 0xBF800000
+#define NVRAM_MAX_BASE_ADR 0x003FFFFF
+
+/* OCM base address */
+#define OCM_BASE_ADDR 0xA0000000
+#define OCM_MAX_SIZE 0x20000
+
+/*
+ * Sequencers (Central and Link) Scratch RAM page definitions.
+ */
+
+/*
+ * The Central Management Sequencer (CSEQ) Scratch Memory is a 1024
+ * byte memory. It is dword accessible and has byte parity
+ * protection. The CSEQ accesses it in 32 byte windows, either as mode
+ * dependent or mode independent memory. Each mode has 96 bytes,
+ * (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of
+ * Mode Independent memory (four 32 byte pages 3-7). Note that mode
+ * dependent scratch memory, Mode 8, page 0-3 overlaps mode
+ * independent scratch memory, pages 0-3.
+ * - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and
+ * 128 bytes in mode 8,
+ * - 259 bytes of mode independent scratch, common to modes 0-15.
+ *
+ * Sequencer scratch RAM is 1024 bytes. This scratch memory is
+ * divided into mode dependent and mode independent scratch with this
+ * memory further subdivided into pages of size 32 bytes. There are 5
+ * pages (160 bytes) of mode independent scratch and 3 pages of
+ * dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages
+ * 0-2 dependent scratch overlap with pages 0-2 of mode independent
+ * scratch memory.
+ *
+ * The host accesses this scratch in a different manner from the
+ * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
+ * and CMnSCRPAGE to access the scratch memory. A flat mapping of the
+ * scratch memory is avaliable for software convenience and to prevent
+ * corruption while the sequencer is running. This memory is mapped
+ * onto addresses 800h - BFFh, total of 400h bytes.
+ *
+ * These addresses are mapped as follows:
+ *
+ * 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1
+ * 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1
+ * 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1
+ * 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1
+ * 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1
+ * 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1
+ * 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1
+ * 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1
+ * A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2
+ * Mode Independent Scratch Pages 0-2
+ * A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3
+ * Mode Independent Scratch Page 3
+ * A80h-AFFh Mode Independent Scratch Pages 4-7
+ * B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2
+ * B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2
+ * B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2
+ * B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2
+ * B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2
+ * BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2
+ * BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2
+ * BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2
+ */
+
+/* General macros */
+#define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */
+
+/* All macros start with offsets from base + 0x800 (CMAPPEDSCR).
+ * Mode dependent scratch page 0, mode 0.
+ * For modes 1-7 you have to do arithmetic. */
+#define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000)
+#define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002)
+#define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004)
+#define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006)
+#define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008)
+
+/* Mode dependent scratch page 0 mode 8 macros. */
+#define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200)
+#define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202)
+#define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204)
+#define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206)
+#define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208)
+#define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A)
+#define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C)
+#define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E)
+#define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210)
+#define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212)
+#define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213)
+#define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A)
+#define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C)
+#define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E)
+
+/* Mode dependent scratch page 1 mode 8 macros. */
+#define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220)
+#define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228)
+
+/* Mode dependent scratch page 2 mode 8 macros */
+#define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240)
+#define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248)
+#define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250)
+#define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254)
+
+/* Mode independent scratch page 4 macros. */
+#define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280)
+#define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282)
+#define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284)
+#define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286)
+#define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288)
+#define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A)
+#define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C)
+#define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E)
+#define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290)
+#define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292)
+#define CSEQ_REG0 (CMAPPEDSCR + 0x0294)
+#define CSEQ_REG1 (CMAPPEDSCR + 0x0296)
+#define CSEQ_REG2 (CMAPPEDSCR + 0x0298)
+#define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C)
+#define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D)
+#define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E)
+
+/* Mode independent scratch page 5 macros. */
+#define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0)
+#define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8)
+#define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0)
+#define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2)
+#define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4)
+#define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6)
+#define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7)
+#define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8)
+
+/* Mode independent scratch page 6 macros. */
+#define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0)
+#define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2)
+#define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4)
+#define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6)
+#define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7)
+#define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8)
+#define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA)
+#define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0)
+#define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2)
+#define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5)
+#define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6)
+#define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8)
+#define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA)
+#define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC)
+
+/* Mode independent scratch page 7 macros. */
+#define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0)
+#define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8)
+#define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0)
+#define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2)
+#define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4)
+#define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6)
+#define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7)
+#define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8)
+#define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA)
+#define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC)
+
+/***************************************************************************
+* Link m Sequencer scratch RAM is 512 bytes.
+* This scratch memory is divided into mode dependent and mode
+* independent scratch with this memory further subdivided into
+* pages of size 32 bytes. There are 4 pages (128 bytes) of
+* mode independent scratch and 4 pages of dependent scratch
+* memory for modes 0-2 (384 bytes).
+*
+* The host accesses this scratch in a different manner from the
+* link sequencer. The sequencer has to use LSEQ registers
+* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
+* mapping of the scratch memory is avaliable for software
+* convenience and to prevent corruption while the sequencer is
+* running. This memory is mapped onto addresses 800h - 9FFh.
+*
+* These addresses are mapped as follows:
+*
+* 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2
+* 860h-87Fh Mode Dependent Scratch Mode 0 Page 3
+* Mode Dependent Scratch Mode 5 Page 0
+* 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2
+* 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3
+* Mode Dependent Scratch Mode 5 Page 1
+* 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2
+* 960h-97Fh Mode Dependent Scratch Mode 2 Page 3
+* Mode Dependent Scratch Mode 5 Page 2
+* 980h-9DFh Mode Independent Scratch Pages 0-3
+* 9E0h-9FFh Mode Independent Scratch Page 3
+* Mode Dependent Scratch Mode 5 Page 3
+*
+****************************************************************************/
+/* General macros */
+#define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */
+#define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */
+#define LSEQ_MODE5_PAGE0_OFFSET 0x60
+
+/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */
+/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */
+#define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000)
+#define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002)
+#define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004)
+
+/* Mode flag macros (byte 0) */
+#define SAS_SAVECTX_OCCURRED 0x80
+#define SAS_OOBSVC_OCCURRED 0x40
+#define SAS_OOB_DEVICE_PRESENT 0x20
+#define SAS_CFGHDR_OCCURRED 0x10
+#define SAS_RCV_INTS_ARE_DISABLED 0x08
+#define SAS_OOB_HOT_PLUG_CNCT 0x04
+#define SAS_AWAIT_OPEN_CONNECTION 0x02
+#define SAS_CFGCMPLT_OCCURRED 0x01
+
+/* Mode flag macros (byte 1) */
+#define SAS_RLSSCB_OCCURRED 0x80
+#define SAS_FORCED_HEADER_MISS 0x40
+
+#define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006)
+#define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008)
+#define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B)
+#define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C)
+
+/* Mode dependent scratch page 0 macros for mode 0 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E)
+#define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010)
+#define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012)
+#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014)
+#define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016)
+#define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A)
+#define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B)
+#define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C)
+#define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D)
+#define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E)
+
+/* Mode dependent scratch page 0 macros for mode 1 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E)
+#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090)
+#define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092)
+#define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A)
+#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B)
+#define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C)
+#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D)
+#define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E)
+
+/* Mode dependent scratch page 0 macros for mode 2 (non-common) */
+#define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E)
+#define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110)
+#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112)
+#define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114)
+#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116)
+#define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A)
+
+/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E)
+#define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F)
+#define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070)
+#define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072)
+#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073)
+#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074)
+#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075)
+#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076)
+#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
+#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C)
+#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
+
+/* Mode dependent scratch page 1, mode 0 and mode 1 */
+#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020)
+#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0)
+
+/* Mode dependent scratch page 1 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120)
+#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124)
+#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128)
+
+/* Mode dependent scratch page 1 macros for mode 4/5 */
+#define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0)
+#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1)
+#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4)
+#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5)
+#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB)
+#define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0)
+#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2)
+#define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4)
+
+/* Mode dependent scratch page 2 macros for mode 0 */
+/* Absolute offsets */
+#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040)
+#define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B)
+#define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C)
+#define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E)
+#define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F)
+
+/* Mode dependent scratch page 2 macros for mode 1 */
+/* Absolute offsets */
+/* byte 0 bits 1-0 are domain select. */
+#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0)
+#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8)
+#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC)
+#define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4)
+
+/* Mode dependent scratch page 2 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140)
+#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144)
+#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148)
+#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C)
+#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \
+ (LmSCRATCH(LinkNum) + 0x0150)
+#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154)
+
+/* Mode dependent scratch page 2 macros for mode 5 */
+#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160)
+#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164)
+#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168)
+#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C)
+
+/* Mode dependent scratch page 3 macros for modes 0 and 1 */
+/* None defined */
+
+/* Mode dependent scratch page 3 macros for modes 2 and 5 */
+/* None defined */
+
+/* Mode Independent Scratch page 0 macros. */
+#define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180)
+#define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182)
+#define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186)
+#define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187)
+/*
+ * Currently only bit 0, SAS_DWSAQD, is used.
+ */
+#define SAS_DWSAQD 0x01 /*
+ * DWSSTATUS: DWSAQD
+ * bit las read in ISR.
+ */
+#define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188)
+/* Connection states (byte 0) */
+#define SAS_WE_OPENED_CS 0x01
+#define SAS_DEVICE_OPENED_CS 0x02
+#define SAS_WE_SENT_DONE_CS 0x04
+#define SAS_DEVICE_SENT_DONE_CS 0x08
+#define SAS_WE_SENT_CLOSE_CS 0x10
+#define SAS_DEVICE_SENT_CLOSE_CS 0x20
+#define SAS_WE_SENT_BREAK_CS 0x40
+#define SAS_DEVICE_SENT_BREAK_CS 0x80
+/* Connection states (byte 1) */
+#define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01
+#define SAS_AIP_RECEIVED_CS 0x02
+#define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04
+#define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08
+#define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10
+#define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20
+/* Connection states (byte 2) */
+#define SAS_SMP_RESPONSE_RECEIVED_CS 0x01
+#define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02
+#define SAS_DEVICE_SENT_DMAT_CS 0x04
+#define SAS_DEVICE_SENT_SYNCSRST_CS 0x08
+#define SAS_CLEARING_AFFILIATION_CS 0x20
+#define SAS_RXTASK_ACTIVE_CS 0x40
+#define SAS_TXTASK_ACTIVE_CS 0x80
+/* Connection states (byte 3) */
+#define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01
+#define SAS_DWS_TIMER_EXPIRED_CS 0x02
+#define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04
+#define SAS_PHY_DISABLED_CS 0x08
+#define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10
+#define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20
+#define SAS_DEVICE_SENT_ID_FRAME_CS 0x40
+#define SAS_DEVICE_SENT_REG_FIS_CS 0x40
+#define SAS_DEVICE_SENT_HARD_RESET_CS 0x80
+#define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\
+ SAS_DWS_TIMER_EXPIRED_CS |\
+ SAS_LINK_RESET_NOT_COMPLETE_CS|\
+ SAS_PHY_DISABLED_CS)
+
+#define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\
+ SAS_PHY_EVENT_TASK_ACTIVE_CS |\
+ SAS_DEVICE_SENT_ID_FRAME_CS |\
+ SAS_DEVICE_SENT_HARD_RESET_CS)
+
+#define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C)
+#define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E)
+#define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F)
+#define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192)
+#define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194)
+#define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196)
+#define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198)
+
+/* Mode independent scratch page 1 macros. */
+#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0)
+#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2)
+#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4)
+#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB)
+#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC)
+#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD)
+#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE)
+#define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8)
+#define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC)
+#define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE)
+
+/* Mode independent scratch page 2 macros. */
+#define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0)
+#define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2)
+#define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4)
+#define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6)
+#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8)
+#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9)
+#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA)
+#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB)
+#define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC)
+#define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD)
+#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE)
+#define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4)
+
+/* Mode independent scratch page 3 macros. */
+#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0)
+#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4)
+#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8)
+#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC)
+#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0)
+#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4)
+#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8)
+#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC)
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
new file mode 100644
index 0000000..64d2317
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -0,0 +1,785 @@
+/*
+ * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_SAS_H_
+#define _AIC94XX_SAS_H_
+
+#include <scsi/libsas.h>
+
+/* ---------- DDBs ---------- */
+/* DDBs are device descriptor blocks which describe a device in the
+ * domain that this sequencer can maintain low-level connections for
+ * us. They are be 64 bytes.
+ */
+
+struct asd_ddb_ssp_smp_target_port {
+ u8 conn_type; /* byte 0 */
+#define DDB_TP_CONN_TYPE 0x81 /* Initiator port and addr frame type 0x01 */
+
+ u8 conn_rate;
+ __be16 init_conn_tag;
+ u8 dest_sas_addr[8]; /* bytes 4-11 */
+
+ __le16 send_queue_head;
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_TARGET */
+#define DDB_TYPE_UNUSED 0xFF
+#define DDB_TYPE_TARGET 0xFE
+#define DDB_TYPE_INITIATOR 0xFD
+#define DDB_TYPE_PM_PORT 0xFC
+
+ __le16 _r_a;
+ __be16 awt_def;
+
+ u8 compat_features; /* byte 20 */
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time;
+ __be32 more_compat_features; /* byte 24 */
+
+ u8 conn_mask;
+ u8 flags; /* concurrent conn:2,2 and open:0(1) */
+#define CONCURRENT_CONN_SUPP 0x04
+#define OPEN_REQUIRED 0x01
+
+ u16 _r_b;
+ __le16 exec_queue_tail;
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+
+ __le16 _r_c;
+
+ u8 max_concurrent_conn;
+ u8 num_concurrent_conn;
+ u8 num_contexts;
+
+ u8 _r_d;
+
+ __le16 active_task_count;
+
+ u8 _r_e[9];
+
+ u8 itnl_reason; /* I_T nexus loss reason */
+
+ __le16 _r_f;
+
+ __le16 itnl_timeout;
+#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
+
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+struct asd_ddb_stp_sata_target_port {
+ u8 conn_type; /* byte 0 */
+ u8 conn_rate;
+ __be16 init_conn_tag;
+ u8 dest_sas_addr[8]; /* bytes 4-11 */
+
+ __le16 send_queue_head;
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_TARGET */
+
+ __le16 _r_a;
+
+ __be16 awt_def;
+ u8 compat_features; /* byte 20 */
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time;
+ __be32 more_compat_features; /* byte 24 */
+
+ u8 conn_mask;
+ u8 flags; /* concurrent conn:2,2 and open:0(1) */
+#define SATA_MULTIPORT 0x80
+#define SUPPORTS_AFFIL 0x40
+#define STP_AFFIL_POL 0x20
+
+ u8 _r_b;
+ u8 flags2; /* STP close policy:0 */
+#define STP_CL_POL_NO_TX 0x00
+#define STP_CL_POL_BTW_CMDS 0x01
+
+ __le16 exec_queue_tail;
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+ __le16 ata_cmd_scbptr;
+ __le32 sata_tag_alloc_mask;
+ __le16 active_task_count;
+ __le16 _r_c;
+ __le32 sata_sactive;
+ u8 num_sata_tags;
+ u8 sata_status;
+ u8 sata_ending_status;
+ u8 itnl_reason; /* I_T nexus loss reason */
+ __le16 ncq_data_scb_ptr;
+ __le16 itnl_timeout;
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_init_port, describes the device descriptor block
+ * of an initiator port (when the sequencer is operating in target mode).
+ * Bytes [0,11] and [20,27] are from the OPEN address frame.
+ * The sequencer allocates an initiator port DDB entry.
+ */
+struct asd_ddb_init_port {
+ u8 conn_type; /* byte 0 */
+ u8 conn_rate;
+ __be16 init_conn_tag; /* BE */
+ u8 dest_sas_addr[8];
+ __le16 send_queue_head; /* LE, byte 12 */
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_INITIATOR */
+ __le16 _r_a;
+ __be16 awt_def; /* BE */
+ u8 compat_features;
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time; /* BE */
+ __be32 more_compat_features; /* BE */
+ u8 conn_mask;
+ u8 flags; /* == 5 */
+ u16 _r_b;
+ __le16 exec_queue_tail; /* execution queue tail */
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+ __le16 init_resp_timeout; /* initiator response timeout */
+ __le32 _r_c;
+ __le16 active_tasks; /* active task count */
+ __le16 init_list; /* initiator list link pointer */
+ __le32 _r_d;
+ u8 max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
+ u8 itnl_reason; /* I_T nexus loss reason */
+ __le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
+ __le16 itnl_to; /* from the Protocol Specific Port Ctrl MP */
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_tag, describes a look-up table to be used
+ * by the sequencers. SATA II, IDENTIFY DEVICE data, word 76, bit 8:
+ * NCQ support. This table is used by the sequencers to find the
+ * corresponding SCB, given a SATA II tag value.
+ */
+struct asd_ddb_sata_tag {
+ __le16 scb_pointer[32];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_table, describes a port number to
+ * connection handle look-up table. SATA targets attached to a port
+ * multiplier require a 4-bit port number value. There is one DDB
+ * entry of this type for each SATA port multiplier (sister DDB).
+ * Given a SATA PM port number, this table gives us the SATA PM Port
+ * DDB of the SATA port multiplier port (i.e. the SATA target
+ * discovered on the port).
+ */
+struct asd_ddb_sata_pm_table {
+ __le16 ddb_pointer[16];
+ __le16 _r_a[16];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
+ * port format DDB.
+ */
+struct asd_ddb_sata_pm_port {
+ u8 _r_a[15];
+ u8 ddb_type;
+ u8 _r_b[13];
+ u8 pm_port_flags;
+#define PM_PORT_MASK 0xF0
+#define PM_PORT_SET 0x02
+ u8 _r_c[6];
+ __le16 sister_ddb;
+ __le16 ata_cmd_scbptr;
+ __le32 sata_tag_alloc_mask;
+ __le16 active_task_count;
+ __le16 parent_ddb;
+ __le32 sata_sactive;
+ u8 num_sata_tags;
+ u8 sata_status;
+ u8 sata_ending_status;
+ u8 _r_d[9];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_seq_shared, describes a DDB shared by the
+ * central and link sequencers. port_map_by_links is indexed phy
+ * number [0,7]; each byte is a bit mask of all the phys that are in
+ * the same port as the indexed phy.
+ */
+struct asd_ddb_seq_shared {
+ __le16 q_free_ddb_head;
+ __le16 q_free_ddb_tail;
+ __le16 q_free_ddb_cnt;
+ __le16 q_used_ddb_head;
+ __le16 q_used_ddb_tail;
+ __le16 shared_mem_lock;
+ __le16 smp_conn_tag;
+ __le16 est_nexus_buf_cnt;
+ __le16 est_nexus_buf_thresh;
+ u32 _r_a;
+ u8 settable_max_contexts;
+ u8 _r_b[23];
+ u8 conn_not_active;
+ u8 phy_is_up;
+ u8 _r_c[8];
+ u8 port_map_by_links[8];
+} __attribute__ ((packed));
+
+/* ---------- SG Element ---------- */
+
+/* This struct sg_el, describes the hardware scatter gather buffer
+ * element. All entries are little endian. In an SCB, there are 2 of
+ * this, plus one more, called a link element of this indicating a
+ * sublist if needed.
+ *
+ * A link element has only the bus address set and the flags (DS) bit
+ * valid. The bus address points to the start of the sublist.
+ *
+ * If a sublist is needed, then that sublist should also include the 2
+ * sg_el embedded in the SCB, in which case next_sg_offset is 32,
+ * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
+ */
+struct sg_el {
+ __le64 bus_addr;
+ __le32 size;
+ __le16 _r;
+ u8 next_sg_offs;
+ u8 flags;
+#define ASD_SG_EL_DS_MASK 0x30
+#define ASD_SG_EL_DS_OCM 0x10
+#define ASD_SG_EL_DS_HM 0x00
+#define ASD_SG_EL_LIST_MASK 0xC0
+#define ASD_SG_EL_LIST_EOL 0x40
+#define ASD_SG_EL_LIST_EOS 0x80
+} __attribute__ ((packed));
+
+/* ---------- SCBs ---------- */
+
+/* An SCB (sequencer control block) is comprised of a common header
+ * and a task part, for a total of 128 bytes. All fields are in LE
+ * order, unless otherwise noted.
+ */
+
+/* This struct scb_header, defines the SCB header format.
+ */
+struct scb_header {
+ __le64 next_scb;
+ __le16 index; /* transaction context */
+ u8 opcode;
+} __attribute__ ((packed));
+
+/* SCB opcodes: Execution queue
+ */
+#define INITIATE_SSP_TASK 0x00
+#define INITIATE_LONG_SSP_TASK 0x01
+#define INITIATE_BIDIR_SSP_TASK 0x02
+#define ABORT_TASK 0x03
+#define INITIATE_SSP_TMF 0x04
+#define SSP_TARG_GET_DATA 0x05
+#define SSP_TARG_GET_DATA_GOOD 0x06
+#define SSP_TARG_SEND_RESP 0x07
+#define QUERY_SSP_TASK 0x08
+#define INITIATE_ATA_TASK 0x09
+#define INITIATE_ATAPI_TASK 0x0a
+#define CONTROL_ATA_DEV 0x0b
+#define INITIATE_SMP_TASK 0x0c
+#define SMP_TARG_SEND_RESP 0x0f
+
+/* SCB opcodes: Send Queue
+ */
+#define SSP_TARG_SEND_DATA 0x40
+#define SSP_TARG_SEND_DATA_GOOD 0x41
+
+/* SCB opcodes: Link Queue
+ */
+#define CONTROL_PHY 0x80
+#define SEND_PRIMITIVE 0x81
+#define INITIATE_LINK_ADM_TASK 0x82
+
+/* SCB opcodes: other
+ */
+#define EMPTY_SCB 0xc0
+#define INITIATE_SEQ_ADM_TASK 0xc1
+#define EST_ICL_TARG_WINDOW 0xc2
+#define COPY_MEM 0xc3
+#define CLEAR_NEXUS 0xc4
+#define INITIATE_DDB_ADM_TASK 0xc6
+#define ESTABLISH_NEXUS_ESCB 0xd0
+
+#define LUN_SIZE 8
+
+/* See SAS spec, task IU
+ */
+struct ssp_task_iu {
+ u8 lun[LUN_SIZE]; /* BE */
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag; /* BE */
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
+/* See SAS spec, command IU
+ */
+struct ssp_command_iu {
+ u8 lun[LUN_SIZE];
+ u8 _r_a;
+ u8 efb_prio_attr; /* enable first burst, task prio & attr */
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
+
+ u8 _r_b;
+ u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
+ union {
+ u8 cdb[16];
+ struct {
+ __le64 long_cdb_addr; /* bus address, LE */
+ __le32 long_cdb_size; /* LE */
+ u8 _r_c[3];
+ u8 eol_ds; /* eol:6,6, ds:5,4 */
+ } long_cdb; /* sequencer extension */
+ };
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset; /* BE */
+ __be32 write_data_len; /* BE */
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+/* ---------- SCB tasks ---------- */
+
+/* This is both ssp_task and long_ssp_task
+ */
+struct initiate_ssp_task {
+ u8 proto_conn_rate; /* proto:6,4, conn_rate:3,0 */
+ __le32 total_xfer_len;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_command_iu ssp_cmd;
+ __le16 sister_scb; /* 0xFFFF */
+ __le16 conn_handle; /* index to DDB for the intended target */
+ u8 data_dir; /* :1,0 */
+#define DATA_DIR_NONE 0x00
+#define DATA_DIR_IN 0x01
+#define DATA_DIR_OUT 0x02
+#define DATA_DIR_BYRECIPIENT 0x03
+
+ u8 _r_a;
+ u8 retry_count;
+ u8 _r_b[5];
+ struct sg_el sg_element[3]; /* 2 real and 1 link */
+} __attribute__ ((packed));
+
+/* This defines both ata_task and atapi_task.
+ * ata: C bit of FIS should be 1,
+ * atapi: C bit of FIS should be 1, and command register should be 0xA0,
+ * to indicate a packet command.
+ */
+struct initiate_ata_task {
+ u8 proto_conn_rate;
+ __le32 total_xfer_len;
+ struct host_to_dev_fis fis;
+ __le32 data_offs;
+ u8 atapi_packet[16];
+ u8 _r_a[12];
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 ata_flags; /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
+#define CSMI_TASK 0x40
+#define DATA_XFER_MODE_DMA 0x10
+#define ATA_Q_TYPE_MASK 0x08
+#define ATA_Q_TYPE_UNTAGGED 0x00
+#define ATA_Q_TYPE_NCQ 0x08
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c;
+ u8 flags;
+#define STP_AFFIL_POLICY 0x20
+#define SET_AFFIL_POLICY 0x10
+#define RET_PARTIAL_SGLIST 0x02
+
+ u8 _r_d[3];
+ struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+struct initiate_smp_task {
+ u8 proto_conn_rate;
+ u8 _r_a[40];
+ struct sg_el smp_req;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 _r_c[8];
+ struct sg_el smp_resp;
+ u8 _r_d[32];
+} __attribute__ ((packed));
+
+struct control_phy {
+ u8 phy_id;
+ u8 sub_func;
+#define DISABLE_PHY 0x00
+#define ENABLE_PHY 0x01
+#define RELEASE_SPINUP_HOLD 0x02
+#define ENABLE_PHY_NO_SAS_OOB 0x03
+#define ENABLE_PHY_NO_SATA_OOB 0x04
+#define PHY_NO_OP 0x05
+#define EXECUTE_HARD_RESET 0x81
+
+ u8 func_mask;
+ u8 speed_mask;
+ u8 hot_plug_delay;
+ u8 port_type;
+ u8 flags;
+#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
+#define DISABLE_PHY_IF_OOB_FAILS 0x02
+
+ __le32 timeout_override;
+ u8 link_reset_retries;
+ u8 _r_a[47];
+ __le16 conn_handle;
+ u8 _r_b[56];
+} __attribute__ ((packed));
+
+struct control_ata_dev {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct host_to_dev_fis fis;
+ u8 _r_b[32];
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 ata_flags; /* 0 */
+ u8 _r_c[55];
+} __attribute__ ((packed));
+
+struct empty_scb {
+ u8 num_valid;
+ __le32 _r_a;
+#define ASD_EDBS_PER_SCB 7
+/* header+data+CRC+DMA suffix data */
+#define ASD_EDB_SIZE (24+1024+4+16)
+ struct sg_el eb[ASD_EDBS_PER_SCB];
+#define ELEMENT_NOT_VALID 0xC0
+} __attribute__ ((packed));
+
+struct initiate_link_adm {
+ u8 phy_id;
+ u8 sub_func;
+#define GET_LINK_ERROR_COUNT 0x00
+#define RESET_LINK_ERROR_COUNT 0x01
+#define ENABLE_NOTIFY_SPINUP_INTS 0x02
+
+ u8 _r_a[57];
+ __le16 conn_handle;
+ u8 _r_b[56];
+} __attribute__ ((packed));
+
+struct copy_memory {
+ u8 _r_a;
+ __le16 xfer_len;
+ __le16 _r_b;
+ __le64 src_busaddr;
+ u8 src_ds; /* See definition of sg_el */
+ u8 _r_c[45];
+ __le16 conn_handle;
+ __le64 _r_d;
+ __le64 dest_busaddr;
+ u8 dest_ds; /* See definition of sg_el */
+ u8 _r_e[39];
+} __attribute__ ((packed));
+
+struct abort_task {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_task_iu ssp_task;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
+#define SUSPEND_DATA_TRANS 0x04
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ __le16 index; /* Transaction context of task to be queried */
+ __le16 itnl_to;
+ u8 _r_d[44];
+} __attribute__ ((packed));
+
+struct clear_nexus {
+ u8 nexus;
+#define NEXUS_ADAPTER 0x00
+#define NEXUS_PORT 0x01
+#define NEXUS_I_T 0x02
+#define NEXUS_I_T_L 0x03
+#define NEXUS_TAG 0x04
+#define NEXUS_TRANS_CX 0x05
+#define NEXUS_SATA_TAG 0x06
+#define NEXUS_T_L 0x07
+#define NEXUS_L 0x08
+#define NEXUS_T_TAG 0x09
+
+ __le32 _r_a;
+ u8 flags;
+#define SUSPEND_TX 0x80
+#define RESUME_TX 0x40
+#define SEND_Q 0x04
+#define EXEC_Q 0x02
+#define NOTINQ 0x01
+
+ u8 _r_b[3];
+ u8 conn_mask;
+ u8 _r_c[19];
+ struct ssp_task_iu ssp_task; /* LUN and TAG */
+ __le16 _r_d;
+ __le16 conn_handle;
+ __le64 _r_e;
+ __le16 index; /* Transaction context of task to be cleared */
+ __le16 context; /* Clear nexus context */
+ u8 _r_f[44];
+} __attribute__ ((packed));
+
+struct initiate_ssp_tmf {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_task_iu ssp_task;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 flags; /* itnl override and suspend data tx */
+#define OVERRIDE_ITNL_TIMER 8
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ __le16 index; /* Transaction context of task to be queried */
+ __le16 itnl_to;
+ u8 _r_d[44];
+} __attribute__ ((packed));
+
+/* Transmits an arbitrary primitive on the link.
+ * Used for NOTIFY and BROADCAST.
+ */
+struct send_prim {
+ u8 phy_id;
+ u8 wait_transmit; /* :0,0 */
+ u8 xmit_flags;
+#define XMTPSIZE_MASK 0xF0
+#define XMTPSIZE_SINGLE 0x10
+#define XMTPSIZE_REPEATED 0x20
+#define XMTPSIZE_CONT 0x20
+#define XMTPSIZE_TRIPLE 0x30
+#define XMTPSIZE_REDUNDANT 0x60
+#define XMTPSIZE_INF 0
+
+#define XMTCONTEN 0x04
+#define XMTPFRM 0x02 /* Transmit at the next frame boundary */
+#define XMTPIMM 0x01 /* Transmit immediately */
+
+ __le16 _r_a;
+ u8 prim[4]; /* K, D0, D1, D2 */
+ u8 _r_b[50];
+ __le16 conn_handle;
+ u8 _r_c[56];
+} __attribute__ ((packed));
+
+/* This describes both SSP Target Get Data and SSP Target Get Data And
+ * Send Good Response SCBs. Used when the sequencer is operating in
+ * target mode...
+ */
+struct ssp_targ_get_data {
+ u8 proto_conn_rate;
+ __le32 total_xfer_len;
+ struct ssp_frame_hdr ssp_frame;
+ struct xfer_rdy_iu xfer_rdy;
+ u8 lun[LUN_SIZE];
+ __le64 _r_a;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 data_dir; /* 01b */
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+/* ---------- The actual SCB struct ---------- */
+
+struct scb {
+ struct scb_header header;
+ union {
+ struct initiate_ssp_task ssp_task;
+ struct initiate_ata_task ata_task;
+ struct initiate_smp_task smp_task;
+ struct control_phy control_phy;
+ struct control_ata_dev control_ata_dev;
+ struct empty_scb escb;
+ struct initiate_link_adm link_adm;
+ struct copy_memory cp_mem;
+ struct abort_task abort_task;
+ struct clear_nexus clear_nexus;
+ struct initiate_ssp_tmf ssp_tmf;
+ };
+} __attribute__ ((packed));
+
+/* ---------- Done List ---------- */
+/* The done list entry opcode field is defined below.
+ * The mnemonic encoding and meaning is as follows:
+ * TC - Task Complete, status was received and acknowledged
+ * TF - Task Failed, indicates an error prior to receiving acknowledgment
+ * for the command:
+ * - no conn,
+ * - NACK or R_ERR received in response to this command,
+ * - credit blocked or not available, or in the case of SMP request,
+ * - no SMP response was received.
+ * In these four cases it is known that the target didn't receive the
+ * command.
+ * TI - Task Interrupted, error after the command was acknowledged. It is
+ * known that the command was received by the target.
+ * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
+ * (R_ERR) was received due to loss of signal, broken connection, loss of
+ * dword sync or other reason. The application client should send the
+ * appropriate task query.
+ * TA - Task Aborted, see TF.
+ * _RESP - The completion includes an empty buffer containing status.
+ * TO - Timeout.
+ */
+#define TC_NO_ERROR 0x00
+#define TC_UNDERRUN 0x01
+#define TC_OVERRUN 0x02
+#define TF_OPEN_TO 0x03
+#define TF_OPEN_REJECT 0x04
+#define TI_BREAK 0x05
+#define TI_PROTO_ERR 0x06
+#define TC_SSP_RESP 0x07
+#define TI_PHY_DOWN 0x08
+#define TF_PHY_DOWN 0x09
+#define TC_LINK_ADM_RESP 0x0a
+#define TC_CSMI 0x0b
+#define TC_ATA_RESP 0x0c
+#define TU_PHY_DOWN 0x0d
+#define TU_BREAK 0x0e
+#define TI_SATA_TO 0x0f
+#define TI_NAK 0x10
+#define TC_CONTROL_PHY 0x11
+#define TF_BREAK 0x12
+#define TC_RESUME 0x13
+#define TI_ACK_NAK_TO 0x14
+#define TF_SMPRSP_TO 0x15
+#define TF_SMP_XMIT_RCV_ERR 0x16
+#define TC_PARTIAL_SG_LIST 0x17
+#define TU_ACK_NAK_TO 0x18
+#define TU_SATA_TO 0x19
+#define TF_NAK_RECV 0x1a
+#define TA_I_T_NEXUS_LOSS 0x1b
+#define TC_ATA_R_ERR_RECV 0x1c
+#define TF_TMF_NO_CTX 0x1d
+#define TA_ON_REQ 0x1e
+#define TF_TMF_NO_TAG 0x1f
+#define TF_TMF_TAG_FREE 0x20
+#define TF_TMF_TASK_DONE 0x21
+#define TF_TMF_NO_CONN_HANDLE 0x22
+#define TC_TASK_CLEARED 0x23
+#define TI_SYNCS_RECV 0x24
+#define TU_SYNCS_RECV 0x25
+#define TF_IRTT_TO 0x26
+#define TF_NO_SMP_CONN 0x27
+#define TF_IU_SHORT 0x28
+#define TF_DATA_OFFS_ERR 0x29
+#define TF_INV_CONN_HANDLE 0x2a
+#define TF_REQUESTED_N_PENDING 0x2b
+
+/* 0xc1 - 0xc7: empty buffer received,
+ 0xd1 - 0xd7: establish nexus empty buffer received
+*/
+/* This is the ESCB mask */
+#define ESCB_RECVD 0xC0
+
+
+/* This struct done_list_struct defines the done list entry.
+ * All fields are LE.
+ */
+struct done_list_struct {
+ __le16 index; /* aka transaction context */
+ u8 opcode;
+ u8 status_block[4];
+ u8 toggle; /* bit 0 */
+#define DL_TOGGLE_MASK 0x01
+} __attribute__ ((packed));
+
+/* ---------- PHYS ---------- */
+
+struct asd_phy {
+ struct asd_sas_phy sas_phy;
+ struct asd_phy_desc *phy_desc; /* hw profile */
+
+ struct sas_identify_frame *identify_frame;
+ struct asd_dma_tok *id_frm_tok;
+
+ u8 frame_rcvd[ASD_EDB_SIZE];
+};
+
+
+#define ASD_SCB_SIZE sizeof(struct scb)
+#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
+
+/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
+ * Default: 0x10 (it's a mask)
+ */
+#define ASD_NOTIFY_ENABLE_SPINUP 0x10
+
+/* If enabled, set this to the interval between transmission
+ * of NOTIFY (ENABLE SPINUP). In units of 200 us.
+ */
+#define ASD_NOTIFY_TIMEOUT 2500
+
+/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
+ * If 0, transmit immediately. In milliseconds.
+ */
+#define ASD_NOTIFY_DOWN_COUNT 0
+
+/* Device present timer timeout constant, 10 ms. */
+#define ASD_DEV_PRESENT_TIMEOUT 0x2710
+
+#define ASD_SATA_INTERLOCK_TIMEOUT 0
+
+/* How long to wait before shutting down an STP connection, unless
+ * an STP target sent frame(s). 50 usec.
+ * IGNORED by the sequencer (i.e. value 0 always).
+ */
+#define ASD_STP_SHUTDOWN_TIMEOUT 0x0
+
+/* ATA soft reset timer timeout. 5 usec. */
+#define ASD_SRST_ASSERT_TIMEOUT 0x05
+
+/* 31 sec */
+#define ASD_RCV_FIS_TIMEOUT 0x01D905C0
+
+#define ASD_ONE_MILLISEC_TIMEOUT 0x03e8
+
+/* COMINIT timer */
+#define ASD_TEN_MILLISEC_TIMEOUT 0x2710
+#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
+
+/* 1 sec */
+#define ASD_SMP_RCV_TIMEOUT 0x000F4240
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
new file mode 100644
index 0000000..7ee49b5
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -0,0 +1,758 @@
+/*
+ * Aic94xx SAS/SATA driver SCB management.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+#include "aic94xx_dump.h"
+
+/* ---------- EMPTY SCB ---------- */
+
+#define DL_PHY_MASK 7
+#define BYTES_DMAED 0
+#define PRIMITIVE_RECVD 0x08
+#define PHY_EVENT 0x10
+#define LINK_RESET_ERROR 0x18
+#define TIMER_EVENT 0x20
+#define REQ_TASK_ABORT 0xF0
+#define REQ_DEVICE_RESET 0xF1
+#define SIGNAL_NCQ_ERROR 0xF2
+#define CLEAR_NCQ_ERROR 0xF3
+
+#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \
+ | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+ | CURRENT_OOB_ERROR)
+
+static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
+{
+ struct sas_phy *sas_phy = phy->sas_phy.phy;
+
+ switch (oob_mode & 7) {
+ case PHY_SPEED_60:
+ /* FIXME: sas transport class doesn't have this */
+ phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ break;
+ case PHY_SPEED_30:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case PHY_SPEED_15:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ }
+ sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+ sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate;
+ sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate;
+
+ if (oob_mode & SAS_MODE)
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ else if (oob_mode & SATA_MODE)
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+}
+
+static inline void asd_phy_event_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ int phy_id = dl->status_block[0] & DL_PHY_MASK;
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+ u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS;
+ u8 oob_mode = dl->status_block[2];
+
+ switch (oob_status) {
+ case CURRENT_LOSS_OF_SIGNAL:
+ /* directly attached device was removed */
+ ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ break;
+ case CURRENT_OOB_DONE:
+ /* hot plugged device */
+ asd_turn_led(asd_ha, phy_id, 1);
+ get_lrate_mode(phy, oob_mode);
+ ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
+ phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ break;
+ case CURRENT_SPINUP_HOLD:
+ /* hot plug SATA, no COMWAKE sent */
+ asd_turn_led(asd_ha, phy_id, 1);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ break;
+ case CURRENT_GTO_TIMEOUT:
+ case CURRENT_OOB_ERROR:
+ ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id,
+ dl->status_block[1]);
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ break;
+ }
+}
+
+/* If phys are enabled sparsely, this will do the right thing. */
+static inline unsigned ord_phy(struct asd_ha_struct *asd_ha,
+ struct asd_phy *phy)
+{
+ u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
+ int i, k = 0;
+
+ for_each_phy(enabled_mask, enabled_mask, i) {
+ if (&asd_ha->phys[i] == phy)
+ return k;
+ k++;
+ }
+ return 0;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * phy: pointer to asd_phy
+ * sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received. If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
+{
+ if (phy->sas_phy.frame_rcvd[0] == 0x34
+ && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+ struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+ /* FIS device-to-host */
+ u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr);
+
+ addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy);
+ *(__be64 *)sas_addr = cpu_to_be64(addr);
+ } else {
+ struct sas_identify_frame *idframe =
+ (void *) phy->sas_phy.frame_rcvd;
+ memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int edb_id, int phy_id)
+{
+ unsigned long flags;
+ int edb_el = edb_id + ascb->edb_index;
+ struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el];
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+ struct sas_ha_struct *sas_ha = phy->sas_phy.ha;
+ u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2];
+
+ size = min(size, (u16) sizeof(phy->frame_rcvd));
+
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size);
+ phy->sas_phy.frame_rcvd_size = size;
+ asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ asd_dump_frame_rcvd(phy, dl);
+ sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+}
+
+static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ u8 lr_error = dl->status_block[1];
+ u8 retries_left = dl->status_block[2];
+
+ switch (lr_error) {
+ case 0:
+ ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id);
+ break;
+ case 1:
+ ASD_DPRINTK("phy%d: Loss of signal\n", phy_id);
+ break;
+ case 2:
+ ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id);
+ break;
+ case 3:
+ ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id);
+ break;
+ default:
+ ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
+ phy_id, lr_error);
+ break;
+ }
+
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(sas_phy);
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+
+ if (retries_left == 0) {
+ int num = 1;
+ struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
+ GFP_ATOMIC);
+ if (!cp) {
+ asd_printk("%s: out of memory\n", __FUNCTION__);
+ goto out;
+ }
+ ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
+ phy_id);
+ asd_build_control_phy(cp, phy_id, ENABLE_PHY);
+ if (asd_post_ascb_list(ascb->ha, cp, 1) != 0)
+ asd_ascb_free(cp);
+ }
+out:
+ ;
+}
+
+static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
+{
+ unsigned long flags;
+ struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ u8 reg = dl->status_block[1];
+ u32 cont = dl->status_block[2] << ((reg & 3)*8);
+
+ reg &= ~3;
+ switch (reg) {
+ case LmPRMSTAT0BYTE0:
+ switch (cont) {
+ case LmBROADCH:
+ case LmBROADRVCH0:
+ case LmBROADRVCH1:
+ case LmBROADSES:
+ ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
+ phy_id, cont);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = ffs(cont);
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
+ break;
+
+ case LmUNKNOWNP:
+ ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id);
+ break;
+
+ default:
+ ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+ phy_id, reg, cont);
+ break;
+ }
+ break;
+ case LmPRMSTAT1BYTE0:
+ switch (cont) {
+ case LmHARDRST:
+ ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
+ phy_id);
+ /* The sequencer disables all phys on that port.
+ * We have to re-enable the phys ourselves. */
+ sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+ break;
+
+ default:
+ ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+ phy_id, reg, cont);
+ break;
+ }
+ break;
+ default:
+ ASD_DPRINTK("unknown primitive register:0x%x\n",
+ dl->status_block[1]);
+ break;
+ }
+}
+
+/**
+ * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
+ * @ascb: pointer to Empty SCB
+ * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
+ *
+ * After an EDB has been invalidated, if all EDBs in this ESCB have been
+ * invalidated, the ESCB is posted back to the sequencer.
+ * Context is tasklet/IRQ.
+ */
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
+{
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ struct empty_scb *escb = &ascb->scb->escb;
+ struct sg_el *eb = &escb->eb[edb_id];
+ struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id];
+
+ memset(edb->vaddr, 0, ASD_EDB_SIZE);
+ eb->flags |= ELEMENT_NOT_VALID;
+ escb->num_valid--;
+
+ if (escb->num_valid == 0) {
+ int i;
+ /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
+ "dma_handle: 0x%08llx, next: 0x%08llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (u64)ascb->dma_scb.dma_handle,
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+ */
+ escb->num_valid = ASD_EDBS_PER_SCB;
+ for (i = 0; i < ASD_EDBS_PER_SCB; i++)
+ escb->eb[i].flags = 0;
+ if (!list_empty(&ascb->list))
+ list_del_init(&ascb->list);
+ i = asd_post_escb_list(ascb->ha, ascb, 1);
+ if (i)
+ asd_printk("couldn't post escb, err:%d\n", i);
+ }
+}
+
+static void escb_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */
+ u8 sb_opcode = dl->status_block[0];
+ int phy_id = sb_opcode & DL_PHY_MASK;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+
+ if (edb > 6 || edb < 0) {
+ ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+ edb, dl->opcode);
+ ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+ sb_opcode, phy_id);
+ ASD_DPRINTK("escb: vaddr: 0x%p, "
+ "dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+ }
+
+ sb_opcode &= ~DL_PHY_MASK;
+
+ switch (sb_opcode) {
+ case BYTES_DMAED:
+ ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+ asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
+ break;
+ case PRIMITIVE_RECVD:
+ ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+ phy_id);
+ asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
+ break;
+ case PHY_EVENT:
+ ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+ asd_phy_event_tasklet(ascb, dl);
+ break;
+ case LINK_RESET_ERROR:
+ ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+ phy_id);
+ asd_link_reset_err_tasklet(ascb, dl, phy_id);
+ break;
+ case TIMER_EVENT:
+ ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
+ __FUNCTION__, phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ /* the device is gone */
+ sas_phy_disconnected(sas_phy);
+ sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+ break;
+ case REQ_TASK_ABORT:
+ ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__,
+ phy_id);
+ break;
+ case REQ_DEVICE_RESET:
+ ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__,
+ phy_id);
+ break;
+ case SIGNAL_NCQ_ERROR:
+ ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__,
+ phy_id);
+ break;
+ case CLEAR_NCQ_ERROR:
+ ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__,
+ phy_id);
+ break;
+ default:
+ ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+ phy_id, sb_opcode);
+ ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+ edb, dl->opcode);
+ ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+ sb_opcode, phy_id);
+ ASD_DPRINTK("escb: vaddr: 0x%p, "
+ "dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+
+ break;
+ }
+
+ asd_invalidate_edb(ascb, edb);
+}
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_escbs; i++)
+ seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete;
+
+ ASD_DPRINTK("posting %d escbs\n", i);
+ return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \
+ | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+ | CURRENT_OOB_ERROR)
+
+/**
+ * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
+ * @ascb: pointer to an ascb
+ * @dl: pointer to the done list entry
+ *
+ * This function completes a CONTROL PHY scb and frees the ascb.
+ * A note on LEDs:
+ * - an LED blinks if there is IO though it,
+ * - if a device is connected to the LED, it is lit,
+ * - if no device is connected to the LED, is is dimmed (off).
+ */
+static void control_phy_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct scb *scb = ascb->scb;
+ struct control_phy *control_phy = &scb->control_phy;
+ u8 phy_id = control_phy->phy_id;
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+
+ u8 status = dl->status_block[0];
+ u8 oob_status = dl->status_block[1];
+ u8 oob_mode = dl->status_block[2];
+ /* u8 oob_signals= dl->status_block[3]; */
+
+ if (status != 0) {
+ ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
+ __FUNCTION__, phy_id, status);
+ goto out;
+ }
+
+ switch (control_phy->sub_func) {
+ case DISABLE_PHY:
+ asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ asd_control_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+ break;
+
+ case ENABLE_PHY:
+ asd_control_led(asd_ha, phy_id, 1);
+ if (oob_status & CURRENT_OOB_DONE) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ get_lrate_mode(phy, oob_mode);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
+ __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+ phy->sas_phy.iproto);
+ } else if (oob_status & CURRENT_SPINUP_HOLD) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+ phy_id);
+ } else if (oob_status & CURRENT_ERR_MASK) {
+ asd_turn_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
+ __FUNCTION__, phy_id, oob_status);
+ } else if (oob_status & (CURRENT_HOT_PLUG_CNCT
+ | CURRENT_DEVICE_PRESENT)) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
+ __FUNCTION__, phy_id);
+ } else {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: phy%d: no device present: "
+ "oob_status:0x%x\n",
+ __FUNCTION__, phy_id, oob_status);
+ }
+ break;
+ case RELEASE_SPINUP_HOLD:
+ case PHY_NO_OP:
+ case EXECUTE_HARD_RESET:
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+ phy_id, control_phy->sub_func);
+ /* XXX finish */
+ break;
+ default:
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+ phy_id, control_phy->sub_func);
+ break;
+ }
+out:
+ asd_ascb_free(ascb);
+}
+
+static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
+{
+ /* disable all speeds, then enable defaults */
+ *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
+ | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS;
+
+ switch (pd->max_sas_lrate) {
+ case SAS_LINK_RATE_6_0_GBPS:
+ *speed_mask &= ~SAS_SPEED_60_DIS;
+ default:
+ case SAS_LINK_RATE_3_0_GBPS:
+ *speed_mask &= ~SAS_SPEED_30_DIS;
+ case SAS_LINK_RATE_1_5_GBPS:
+ *speed_mask &= ~SAS_SPEED_15_DIS;
+ }
+
+ switch (pd->min_sas_lrate) {
+ case SAS_LINK_RATE_6_0_GBPS:
+ *speed_mask |= SAS_SPEED_30_DIS;
+ case SAS_LINK_RATE_3_0_GBPS:
+ *speed_mask |= SAS_SPEED_15_DIS;
+ default:
+ case SAS_LINK_RATE_1_5_GBPS:
+ /* nothing to do */
+ ;
+ }
+
+ switch (pd->max_sata_lrate) {
+ case SAS_LINK_RATE_3_0_GBPS:
+ *speed_mask &= ~SATA_SPEED_30_DIS;
+ default:
+ case SAS_LINK_RATE_1_5_GBPS:
+ *speed_mask &= ~SATA_SPEED_15_DIS;
+ }
+
+ switch (pd->min_sata_lrate) {
+ case SAS_LINK_RATE_3_0_GBPS:
+ *speed_mask |= SATA_SPEED_15_DIS;
+ default:
+ case SAS_LINK_RATE_1_5_GBPS:
+ /* nothing to do */
+ ;
+ }
+}
+
+/**
+ * asd_build_control_phy -- build a CONTROL PHY SCB
+ * @ascb: pointer to an ascb
+ * @phy_id: phy id to control, integer
+ * @subfunc: subfunction, what to actually to do the phy
+ *
+ * This function builds a CONTROL PHY scb. No allocation of any kind
+ * is performed. @ascb is allocated with the list function.
+ * The caller can override the ascb->tasklet_complete to point
+ * to its own callback function. It must call asd_ascb_free()
+ * at its tasklet complete function.
+ * See the default implementation.
+ */
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc)
+{
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+ struct scb *scb = ascb->scb;
+ struct control_phy *control_phy = &scb->control_phy;
+
+ scb->header.opcode = CONTROL_PHY;
+ control_phy->phy_id = (u8) phy_id;
+ control_phy->sub_func = subfunc;
+
+ switch (subfunc) {
+ case EXECUTE_HARD_RESET: /* 0x81 */
+ case ENABLE_PHY: /* 0x01 */
+ /* decide hot plug delay */
+ control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT;
+
+ /* decide speed mask */
+ set_speed_mask(&control_phy->speed_mask, phy->phy_desc);
+
+ /* initiator port settings are in the hi nibble */
+ if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
+ control_phy->port_type = SAS_PROTO_ALL << 4;
+ else if (phy->sas_phy.role == PHY_ROLE_TARGET)
+ control_phy->port_type = SAS_PROTO_ALL;
+ else
+ control_phy->port_type =
+ (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+
+ /* link reset retries, this should be nominal */
+ control_phy->link_reset_retries = 10;
+
+ case RELEASE_SPINUP_HOLD: /* 0x02 */
+ /* decide the func_mask */
+ control_phy->func_mask = FUNCTION_MASK_DEFAULT;
+ if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD)
+ control_phy->func_mask &= ~SPINUP_HOLD_DIS;
+ else
+ control_phy->func_mask |= SPINUP_HOLD_DIS;
+ }
+
+ control_phy->conn_handle = cpu_to_le16(0xFFFF);
+
+ ascb->tasklet_complete = control_phy_tasklet_complete;
+}
+
+/* ---------- INITIATE LINK ADM TASK ---------- */
+
+static void link_adm_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ u8 opcode = dl->opcode;
+ struct initiate_link_adm *link_adm = &ascb->scb->link_adm;
+ u8 phy_id = link_adm->phy_id;
+
+ if (opcode != TC_NO_ERROR) {
+ asd_printk("phy%d: link adm task 0x%x completed with error "
+ "0x%x\n", phy_id, link_adm->sub_func, opcode);
+ }
+ ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
+ phy_id, link_adm->sub_func, opcode);
+
+ asd_ascb_free(ascb);
+}
+
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+ u8 subfunc)
+{
+ struct scb *scb = ascb->scb;
+ struct initiate_link_adm *link_adm = &scb->link_adm;
+
+ scb->header.opcode = INITIATE_LINK_ADM_TASK;
+
+ link_adm->phy_id = phy_id;
+ link_adm->sub_func = subfunc;
+ link_adm->conn_handle = cpu_to_le16(0xFFFF);
+
+ ascb->tasklet_complete = link_adm_tasklet_complete;
+}
+
+/* ---------- SCB timer ---------- */
+
+/**
+ * asd_ascb_timedout -- called when a pending SCB's timer has expired
+ * @data: unsigned long, a pointer to the ascb in question
+ *
+ * This is the default timeout function which does the most necessary.
+ * Upper layers can implement their own timeout function, say to free
+ * resources they have with this SCB, and then call this one at the
+ * end of their timeout function. To do this, one should initialize
+ * the ascb->timer.{function, data, expires} prior to calling the post
+ * funcion. The timer is started by the post function.
+ */
+void asd_ascb_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ unsigned long flags;
+
+ ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode);
+
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ seq->pending--;
+ list_del_init(&ascb->list);
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+
+ asd_ascb_free(ascb);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+/* Given the spec value, return a driver value. */
+static const int phy_func_table[] = {
+ [PHY_FUNC_NOP] = PHY_NO_OP,
+ [PHY_FUNC_LINK_RESET] = ENABLE_PHY,
+ [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET,
+ [PHY_FUNC_DISABLE] = DISABLE_PHY,
+ [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
+};
+
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg)
+{
+ struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
+ struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc;
+ struct asd_ascb *ascb;
+ struct sas_phy_linkrates *rates;
+ int res = 1;
+
+ switch (func) {
+ case PHY_FUNC_CLEAR_ERROR_LOG:
+ return -ENOSYS;
+ case PHY_FUNC_SET_LINK_RATE:
+ rates = arg;
+ if (rates->minimum_linkrate) {
+ pd->min_sas_lrate = rates->minimum_linkrate;
+ pd->min_sata_lrate = rates->minimum_linkrate;
+ }
+ if (rates->maximum_linkrate) {
+ pd->max_sas_lrate = rates->maximum_linkrate;
+ pd->max_sata_lrate = rates->maximum_linkrate;
+ }
+ func = PHY_FUNC_LINK_RESET;
+ break;
+ default:
+ break;
+ }
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+
+ asd_build_control_phy(ascb, phy->id, phy_func_table[func]);
+ res = asd_post_ascb_list(asd_ha, ascb , 1);
+ if (res)
+ asd_ascb_free(ascb);
+
+ return res;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
new file mode 100644
index 0000000..83574b5
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -0,0 +1,1089 @@
+/*
+ * Aic94xx SAS/SATA driver access to shared data structures and memory
+ * maps.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+
+/* ---------- OCM stuff ---------- */
+
+struct asd_ocm_dir_ent {
+ u8 type;
+ u8 offs[3];
+ u8 _r1;
+ u8 size[3];
+} __attribute__ ((packed));
+
+struct asd_ocm_dir {
+ char sig[2];
+ u8 _r1[2];
+ u8 major; /* 0 */
+ u8 minor; /* 0 */
+ u8 _r2;
+ u8 num_de;
+ struct asd_ocm_dir_ent entry[15];
+} __attribute__ ((packed));
+
+#define OCM_DE_OCM_DIR 0x00
+#define OCM_DE_WIN_DRVR 0x01
+#define OCM_DE_BIOS_CHIM 0x02
+#define OCM_DE_RAID_ENGN 0x03
+#define OCM_DE_BIOS_INTL 0x04
+#define OCM_DE_BIOS_CHIM_OSM 0x05
+#define OCM_DE_BIOS_CHIM_DYNAMIC 0x06
+#define OCM_DE_ADDC2C_RES0 0x07
+#define OCM_DE_ADDC2C_RES1 0x08
+#define OCM_DE_ADDC2C_RES2 0x09
+#define OCM_DE_ADDC2C_RES3 0x0A
+
+#define OCM_INIT_DIR_ENTRIES 5
+/***************************************************************************
+* OCM dircetory default
+***************************************************************************/
+static struct asd_ocm_dir OCMDirInit =
+{
+ .sig = {0x4D, 0x4F}, /* signature */
+ .num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */
+};
+
+/***************************************************************************
+* OCM dircetory Entries default
+***************************************************************************/
+static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
+{
+ {
+ .type = (OCM_DE_ADDC2C_RES0), /* Entry type */
+ .offs = {128}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES1), /* Entry type */
+ .offs = {128, 4}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES2), /* Entry type */
+ .offs = {128, 8}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES3), /* Entry type */
+ .offs = {128, 12}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_WIN_DRVR), /* Entry type */
+ .offs = {128, 16}, /* Offset */
+ .size = {128, 235, 1}, /* size */
+ },
+};
+
+struct asd_bios_chim_struct {
+ char sig[4];
+ u8 major; /* 1 */
+ u8 minor; /* 0 */
+ u8 bios_major;
+ u8 bios_minor;
+ __le32 bios_build;
+ u8 flags;
+ u8 pci_slot;
+ __le16 ue_num;
+ __le16 ue_size;
+ u8 _r[14];
+ /* The unit element array is right here.
+ */
+} __attribute__ ((packed));
+
+/**
+ * asd_read_ocm_seg - read an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to write the read data
+ * @offs: offset into OCM where to read from
+ * @size: how many bytes to read
+ *
+ * Return the number of bytes not read. Return 0 on success.
+ */
+static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+ u32 offs, int size)
+{
+ u8 *p = buffer;
+ if (unlikely(asd_ha->iospace))
+ asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+ else {
+ for ( ; size > 0; size--, offs++, p++)
+ *p = asd_read_ocm_byte(asd_ha, offs);
+ }
+ return size;
+}
+
+static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir, u32 offs)
+{
+ int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ return err;
+ }
+
+ if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
+ ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
+ dir->sig[0], dir->sig[1]);
+ return -ENOENT;
+ }
+ if (dir->major != 0) {
+ asd_printk("unsupported major version of ocm dir:0x%x\n",
+ dir->major);
+ return -ENOENT;
+ }
+ dir->num_de &= 0xf;
+ return 0;
+}
+
+/**
+ * asd_write_ocm_seg - write an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to read the write data
+ * @offs: offset into OCM to write to
+ * @size: how many bytes to write
+ *
+ * Return the number of bytes not written. Return 0 on success.
+ */
+static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+ u32 offs, int size)
+{
+ u8 *p = buffer;
+ if (unlikely(asd_ha->iospace))
+ asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+ else {
+ for ( ; size > 0; size--, offs++, p++)
+ asd_write_ocm_byte(asd_ha, offs, *p);
+ }
+ return;
+}
+
+#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
+
+static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_ocm_dir_ent *ent;
+
+ for (i = 0; i < dir->num_de; i++) {
+ if (dir->entry[i].type == type)
+ break;
+ }
+ if (i >= dir->num_de)
+ return -ENOENT;
+ ent = &dir->entry[i];
+ *offs = (u32) THREE_TO_NUM(ent->offs);
+ *size = (u32) THREE_TO_NUM(ent->size);
+ return 0;
+}
+
+#define OCM_BIOS_CHIM_DE 2
+#define BC_BIOS_PRESENT 1
+
+static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir)
+{
+ int err;
+ struct asd_bios_chim_struct *bc_struct;
+ u32 offs, size;
+
+ err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
+ goto out;
+ }
+ err = -ENOMEM;
+ bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
+ if (!bc_struct) {
+ asd_printk("no memory for bios_chim struct\n");
+ goto out;
+ }
+ err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
+ sizeof(*bc_struct));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ goto out2;
+ }
+ if (strncmp(bc_struct->sig, "SOIB", 4)
+ && strncmp(bc_struct->sig, "IPSA", 4)) {
+ ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
+ bc_struct->sig[0], bc_struct->sig[1],
+ bc_struct->sig[2], bc_struct->sig[3]);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->major != 1) {
+ asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
+ bc_struct->major);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->flags & BC_BIOS_PRESENT) {
+ asd_ha->hw_prof.bios.present = 1;
+ asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
+ asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
+ asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
+ ASD_DPRINTK("BIOS present (%d,%d), %d\n",
+ asd_ha->hw_prof.bios.maj,
+ asd_ha->hw_prof.bios.min,
+ asd_ha->hw_prof.bios.bld);
+ }
+ asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
+ asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
+ ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
+ asd_ha->hw_prof.ue.size);
+ size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
+ if (size > 0) {
+ err = -ENOMEM;
+ asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ue.area)
+ goto out2;
+ err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
+ offs + sizeof(*bc_struct), size);
+ if (err) {
+ kfree(asd_ha->hw_prof.ue.area);
+ asd_ha->hw_prof.ue.area = NULL;
+ asd_ha->hw_prof.ue.num = 0;
+ asd_ha->hw_prof.ue.size = 0;
+ ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
+ }
+ }
+out2:
+ kfree(bc_struct);
+out:
+ return err;
+}
+
+static void
+asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ /* Zero OCM */
+ for (i = 0; i < OCM_MAX_SIZE; i += 4)
+ asd_write_ocm_dword(asd_ha, i, 0);
+
+ /* Write Dir */
+ asd_write_ocm_seg(asd_ha, &OCMDirInit, 0,
+ sizeof(struct asd_ocm_dir));
+
+ /* Write Dir Entries */
+ for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++)
+ asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i],
+ sizeof(struct asd_ocm_dir) +
+ (i * sizeof(struct asd_ocm_dir_ent))
+ , sizeof(struct asd_ocm_dir_ent));
+
+}
+
+static int
+asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha)
+{
+ struct pci_dev *pcidev = asd_ha->pcidev;
+ u32 reg;
+ int err = 0;
+ u32 v;
+
+ /* check if OCM has been initialized by BIOS */
+ reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+ if (!(reg & OCMINITIALIZED)) {
+ err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v);
+ if (err) {
+ asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n",
+ pci_name(pcidev));
+ goto out;
+ }
+
+ printk(KERN_INFO "OCM is not initialized by BIOS,"
+ "reinitialize it and ignore it, current IntrptStatus"
+ "is 0x%x\n", v);
+
+ if (v)
+ err = pci_write_config_dword(pcidev,
+ PCIC_INTRPT_STAT, v);
+ if (err) {
+ asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n",
+ pci_name(pcidev));
+ goto out;
+ }
+
+ asd_hwi_initialize_ocm_dir(asd_ha);
+
+ }
+out:
+ return err;
+}
+
+/**
+ * asd_read_ocm - read on chip memory (OCM)
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_ocm(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_ocm_dir *dir;
+
+ if (asd_hwi_check_ocm_access(asd_ha))
+ return -1;
+
+ dir = kmalloc(sizeof(*dir), GFP_KERNEL);
+ if (!dir) {
+ asd_printk("no memory for ocm dir\n");
+ return -ENOMEM;
+ }
+
+ err = asd_read_ocm_dir(asd_ha, dir, 0);
+ if (err)
+ goto out;
+
+ err = asd_get_bios_chim(asd_ha, dir);
+out:
+ kfree(dir);
+ return err;
+}
+
+/* ---------- FLASH stuff ---------- */
+
+#define FLASH_RESET 0xF0
+
+#define FLASH_SIZE 0x200000
+#define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** "
+#define FLASH_NEXT_ENTRY_OFFS 0x2000
+#define FLASH_MAX_DIR_ENTRIES 32
+
+#define FLASH_DE_TYPE_MASK 0x3FFFFFFF
+#define FLASH_DE_MS 0x120
+#define FLASH_DE_CTRL_A_USER 0xE0
+
+struct asd_flash_de {
+ __le32 type;
+ __le32 offs;
+ __le32 pad_size;
+ __le32 image_size;
+ __le32 chksum;
+ u8 _r[12];
+ u8 version[32];
+} __attribute__ ((packed));
+
+struct asd_flash_dir {
+ u8 cookie[32];
+ __le32 rev; /* 2 */
+ __le32 chksum;
+ __le32 chksum_antidote;
+ __le32 bld;
+ u8 bld_id[32]; /* build id data */
+ u8 ver_data[32]; /* date and time of build */
+ __le32 ae_mask;
+ __le32 v_mask;
+ __le32 oc_mask;
+ u8 _r[20];
+ struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
+} __attribute__ ((packed));
+
+struct asd_manuf_sec {
+ char sig[2]; /* 'S', 'M' */
+ u16 offs_next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ u16 chksum;
+ u16 size;
+ u8 _r[6];
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 pcba_sn[ASD_PCBA_SN_SIZE];
+ /* Here start the other segments */
+ u8 linked_list[0];
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_desc {
+ u8 state; /* low 4 bits */
+#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_REPORTED 1
+#define MS_PHY_STATE_HIDDEN 2
+ u8 phy_id;
+ u16 _r;
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_param {
+ char sig[2]; /* 'P', 'M' */
+ u16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 2 */
+ u8 num_phy_desc; /* 8 */
+ u8 phy_desc_size; /* 8 */
+ u8 _r[3];
+ u8 usage_model_id;
+ u32 _r2;
+ struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_sb_type[] = {
+ "unknown",
+ "SGPIO",
+ [2 ... 0x7F] = "unknown",
+ [0x80] = "ADPT_I2C",
+ [0x81 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+#endif
+
+struct asd_ms_sb_desc {
+ u8 type;
+ u8 node_desc_index;
+ u8 conn_desc_index;
+ u8 _recvd[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_conn_type[] = {
+ [0 ... 7] = "unknown",
+ "SFF8470",
+ "SFF8482",
+ "SFF8484",
+ [0x80] = "PCIX_DAUGHTER0",
+ [0x81] = "SAS_DAUGHTER0",
+ [0x82 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+
+static const char *asd_conn_location[] = {
+ "unknown",
+ "internal",
+ "external",
+ "board_to_board",
+};
+#endif
+
+struct asd_ms_conn_desc {
+ u8 type;
+ u8 location;
+ u8 num_sideband_desc;
+ u8 size_sideband_desc;
+ u32 _resvd;
+ u8 name[16];
+ struct asd_ms_sb_desc sb_desc[0];
+} __attribute__ ((packed));
+
+struct asd_nd_phy_desc {
+ u8 vp_attch_type;
+ u8 attch_specific[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_node_type[] = {
+ "IOP",
+ "IO_CONTROLLER",
+ "EXPANDER",
+ "PORT_MULTIPLIER",
+ "PORT_MULTIPLEXER",
+ "MULTI_DROP_I2C_BUS",
+};
+#endif
+
+struct asd_ms_node_desc {
+ u8 type;
+ u8 num_phy_desc;
+ u8 size_phy_desc;
+ u8 _resvd;
+ u8 name[16];
+ struct asd_nd_phy_desc phy_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ms_conn_map {
+ char sig[2]; /* 'M', 'C' */
+ __le16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ __le16 cm_size; /* size of this struct */
+ u8 num_conn;
+ u8 conn_size;
+ u8 num_nodes;
+ u8 usage_model_id;
+ u32 _resvd;
+ struct asd_ms_conn_desc conn_desc[0];
+ struct asd_ms_node_desc node_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_entry {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 sas_link_rates; /* max in hi bits, min in low bits */
+ u8 flags;
+ u8 sata_link_rates;
+ u8 _r[5];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_settings {
+ u8 id0; /* P'h'y */
+ u8 _r;
+ u16 next;
+ u8 num_phys; /* number of PHYs in the PCI function */
+ u8 _r2[3];
+ struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct asd_ll_el {
+ u8 id0;
+ u8 id1;
+ __le16 next;
+ u8 something_here[0];
+} __attribute__ ((packed));
+
+static int asd_poll_flash(struct asd_ha_struct *asd_ha)
+{
+ int c;
+ u8 d;
+
+ for (c = 5000; c > 0; c--) {
+ d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ if (!d)
+ return 0;
+ udelay(5);
+ }
+ return -ENOENT;
+}
+
+static int asd_reset_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_poll_flash(asd_ha);
+ if (err)
+ return err;
+ asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
+ err = asd_poll_flash(asd_ha);
+
+ return err;
+}
+
+static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
+ void *buffer, u32 offs, int size)
+{
+ asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
+ size);
+ return 0;
+}
+
+/**
+ * asd_find_flash_dir - finds and reads the flash directory
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to flash directory structure
+ *
+ * If found, the flash directory segment will be copied to
+ * @flash_dir. Return 1 if found, 0 if not.
+ */
+static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ u32 v;
+ for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(FLASH_DIR_COOKIE)-1);
+ if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
+ sizeof(FLASH_DIR_COOKIE)-1) == 0) {
+ asd_ha->hw_prof.flash.dir_offs = v;
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(*flash_dir));
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int asd_flash_getid(struct asd_ha_struct *asd_ha)
+{
+ int err = 0;
+ u32 reg;
+
+ reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+ if (!(reg & FLASHEX)) {
+ ASD_DPRINTK("flash doesn't exist\n");
+ return -ENOENT;
+ }
+ if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
+ &asd_ha->hw_prof.flash.bar)) {
+ asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
+ pci_name(asd_ha->pcidev));
+ return -ENOENT;
+ }
+ asd_ha->hw_prof.flash.present = 1;
+ asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
+ err = asd_reset_flash(asd_ha);
+ if (err) {
+ ASD_DPRINTK("couldn't reset flash(%d)\n", err);
+ return err;
+ }
+ return 0;
+}
+
+static u16 asd_calc_flash_chksum(u16 *p, int size)
+{
+ u16 chksum = 0;
+
+ while (size-- > 0)
+ chksum += *p++;
+
+ return chksum;
+}
+
+
+static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_flash_de *de;
+
+ for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
+ u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
+
+ type &= FLASH_DE_TYPE_MASK;
+ if (type == entry_type)
+ break;
+ }
+ if (i >= FLASH_MAX_DIR_ENTRIES)
+ return -ENOENT;
+ de = &flash_dir->dir_entry[i];
+ *offs = le32_to_cpu(de->offs);
+ *size = le32_to_cpu(de->pad_size);
+ return 0;
+}
+
+static int asd_validate_ms(struct asd_manuf_sec *ms)
+{
+ if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
+ ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
+ ms->sig[0], ms->sig[1]);
+ return -ENOENT;
+ }
+ if (ms->maj != 0) {
+ asd_printk("unsupported manuf. sector. major version:%x\n",
+ ms->maj);
+ return -ENOENT;
+ }
+ ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
+ ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
+ ms->size = le16_to_cpu((__force __le16) ms->size);
+
+ if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
+ asd_printk("failed manuf sector checksum\n");
+ }
+
+ return 0;
+}
+
+static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
+ return 0;
+}
+
+static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
+ asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
+ return 0;
+}
+
+/**
+ * asd_find_ll_by_id - find a linked list entry by its id
+ * @start: void pointer to the first element in the linked list
+ * @id0: the first byte of the id (offs 0)
+ * @id1: the second byte of the id (offs 1)
+ *
+ * @start has to be the _base_ element start, since the
+ * linked list entries's offset is from this pointer.
+ * Some linked list entries use only the first id, in which case
+ * you can pass 0xFF for the second.
+ */
+static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
+{
+ struct asd_ll_el *el = start;
+
+ do {
+ switch (id1) {
+ default:
+ if (el->id1 == id1)
+ case 0xFF:
+ if (el->id0 == id0)
+ return el;
+ }
+ el = start + le16_to_cpu(el->next);
+ } while (el != start);
+
+ return NULL;
+}
+
+/**
+ * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @manuf_sec: pointer to the manufacturing sector
+ *
+ * The manufacturing sector contans also the linked list of sub-segments,
+ * since when it was read, its size was taken from the flash directory,
+ * not from the structure size.
+ *
+ * HIDDEN phys do not count in the total count. REPORTED phys cannot
+ * be enabled but are reported and counted towards the total.
+ * ENEBLEABLE phys are enabled by default and count towards the total.
+ * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
+ * merely specifies the number of phys the host adapter decided to
+ * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
+ * are actually enabled (enabled by default, max number of phys
+ * enableable in this case).
+ */
+static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ int i;
+ int en_phys = 0;
+ int rep_phys = 0;
+ struct asd_manuf_phy_param *phy_param;
+ struct asd_manuf_phy_param dflt_phy_param;
+
+ phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
+ if (!phy_param) {
+ ASD_DPRINTK("ms: no phy parameters found\n");
+ ASD_DPRINTK("ms: Creating default phy parameters\n");
+ dflt_phy_param.sig[0] = 'P';
+ dflt_phy_param.sig[1] = 'M';
+ dflt_phy_param.maj = 0;
+ dflt_phy_param.min = 2;
+ dflt_phy_param.num_phy_desc = 8;
+ dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc);
+ for (i =0; i < ASD_MAX_PHYS; i++) {
+ dflt_phy_param.phy_desc[i].state = 0;
+ dflt_phy_param.phy_desc[i].phy_id = i;
+ dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6;
+ dflt_phy_param.phy_desc[i].phy_control_1 = 0x10;
+ dflt_phy_param.phy_desc[i].phy_control_2 = 0x43;
+ dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb;
+ }
+
+ phy_param = &dflt_phy_param;
+
+ }
+
+ if (phy_param->maj != 0) {
+ asd_printk("unsupported manuf. phy param major version:0x%x\n",
+ phy_param->maj);
+ return -ENOENT;
+ }
+
+ ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
+ asd_ha->hw_prof.enabled_phys = 0;
+ for (i = 0; i < phy_param->num_phy_desc; i++) {
+ struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
+ switch (pd->state & 0xF) {
+ case MS_PHY_STATE_HIDDEN:
+ ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
+ continue;
+ case MS_PHY_STATE_REPORTED:
+ ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ rep_phys++;
+ continue;
+ case MS_PHY_STATE_ENABLEABLE:
+ ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+ asd_ha->hw_prof.enabled_phys |= (1 << i);
+ en_phys++;
+ break;
+ }
+ asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
+ asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
+ asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
+ asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
+ }
+ asd_ha->hw_prof.max_phys = rep_phys + en_phys;
+ asd_ha->hw_prof.num_phys = en_phys;
+ ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
+ asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
+ ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
+ return 0;
+}
+
+static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ struct asd_ms_conn_map *cm;
+
+ cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
+ if (!cm) {
+ ASD_DPRINTK("ms: no connector map found\n");
+ return 0;
+ }
+
+ if (cm->maj != 0) {
+ ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
+ "\n", cm->maj);
+ return -ENOENT;
+ }
+
+ /* XXX */
+
+ return 0;
+}
+
+
+/**
+ * asd_process_ms - find and extract information from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ms(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err;
+ struct asd_manuf_sec *manuf_sec;
+ u32 offs, size;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("Couldn't find the manuf. sector\n");
+ goto out;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ manuf_sec = kmalloc(size, GFP_KERNEL);
+ if (!manuf_sec) {
+ ASD_DPRINTK("no mem for manuf sector\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
+ offs, size);
+ goto out2;
+ }
+
+ err = asd_validate_ms(manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't validate manuf sector\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the SAS_ADDR\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
+ SAS_ADDR(asd_ha->hw_prof.sas_addr));
+
+ err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the PCBA SN\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
+
+ err = asd_ms_get_phy_params(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get phy parameters\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_connector_map(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get connector map\n");
+ goto out2;
+ }
+
+out2:
+ kfree(manuf_sec);
+out:
+ return err;
+}
+
+static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
+ struct asd_ctrla_phy_settings *ps)
+{
+ int i;
+ for (i = 0; i < ps->num_phys; i++) {
+ struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
+
+ if (!PHY_ENABLED(asd_ha, i))
+ continue;
+ if (*(u64 *)pe->sas_addr == 0) {
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ continue;
+ }
+ /* This is the SAS address which should be sent in IDENTIFY. */
+ memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
+ SAS_ADDR_SIZE);
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+ (pe->sas_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+ (pe->sas_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+ (pe->sata_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+ (pe->sata_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
+ ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
+ " sata rate:0x%x-0x%x, flags:0x%x\n",
+ i,
+ SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].flags);
+ }
+
+ return 0;
+}
+
+/**
+ * asd_process_ctrl_a_user - process CTRL-A user settings
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err, i;
+ u32 offs, size;
+ struct asd_ll_el *el;
+ struct asd_ctrla_phy_settings *ps;
+ struct asd_ctrla_phy_settings dflt_ps;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
+ ASD_DPRINTK("Creating default CTRL-A user settings section\n");
+
+ dflt_ps.id0 = 'h';
+ dflt_ps.num_phys = 8;
+ for (i =0; i < ASD_MAX_PHYS; i++) {
+ memcpy(dflt_ps.phy_ent[i].sas_addr,
+ asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+ dflt_ps.phy_ent[i].sas_link_rates = 0x98;
+ dflt_ps.phy_ent[i].flags = 0x0;
+ dflt_ps.phy_ent[i].sata_link_rates = 0x0;
+ }
+
+ size = sizeof(struct asd_ctrla_phy_settings);
+ ps = &dflt_ps;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ el = kmalloc(size, GFP_KERNEL);
+ if (!el) {
+ ASD_DPRINTK("no mem for ctrla user settings section\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read ctrla phy settings section\n");
+ goto out2;
+ }
+
+ err = -ENOENT;
+ ps = asd_find_ll_by_id(el, 'h', 0xFF);
+ if (!ps) {
+ ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
+ goto out2;
+ }
+
+ err = asd_process_ctrla_phy_settings(asd_ha, ps);
+ if (err) {
+ ASD_DPRINTK("couldn't process ctrla phy settings\n");
+ goto out2;
+ }
+out2:
+ kfree(el);
+out:
+ return err;
+}
+
+/**
+ * asd_read_flash - read flash memory
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_flash_dir *flash_dir;
+
+ err = asd_flash_getid(asd_ha);
+ if (err)
+ return err;
+
+ flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
+ if (!flash_dir)
+ return -ENOMEM;
+
+ err = -ENOENT;
+ if (!asd_find_flash_dir(asd_ha, flash_dir)) {
+ ASD_DPRINTK("couldn't find flash directory\n");
+ goto out;
+ }
+
+ if (le32_to_cpu(flash_dir->rev) != 2) {
+ asd_printk("unsupported flash dir version:0x%x\n",
+ le32_to_cpu(flash_dir->rev));
+ goto out;
+ }
+
+ err = asd_process_ms(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process manuf sector settings\n");
+ goto out;
+ }
+
+ err = asd_process_ctrl_a_user(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process CTRL-A user settings\n");
+ goto out;
+ }
+
+out:
+ kfree(flash_dir);
+ return err;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
new file mode 100644
index 0000000..d9b6da5f
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -0,0 +1,1404 @@
+/*
+ * Aic94xx SAS/SATA driver sequencer interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Parts of this code adapted from David Chaw's adp94xx_seq.c.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+/* It takes no more than 0.05 us for an instruction
+ * to complete. So waiting for 1 us should be more than
+ * plenty.
+ */
+#define PAUSE_DELAY 1
+#define PAUSE_TRIES 1000
+
+static const struct firmware *sequencer_fw;
+static const char *sequencer_version;
+static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
+ cseq_idle_loop, lseq_idle_loop;
+static u8 *cseq_code, *lseq_code;
+static u32 cseq_code_size, lseq_code_size;
+
+static u16 first_scb_site_no = 0xFFFF;
+static u16 last_scb_site_no;
+
+/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
+
+/**
+ * asd_pause_cseq - pause the central sequencer
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_cseq(struct asd_ha_struct *asd_ha)
+{
+ int count = PAUSE_TRIES;
+ u32 arp2ctl;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (arp2ctl & PAUSED)
+ return 0;
+
+ asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (arp2ctl & PAUSED)
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't pause CSEQ\n");
+ return -1;
+}
+
+/**
+ * asd_unpause_cseq - unpause the central sequencer.
+ * @asd_ha: pointer to host adapter structure.
+ *
+ * Return 0 on success, negative on error.
+ */
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (!(arp2ctl & PAUSED))
+ return 0;
+
+ asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (!(arp2ctl & PAUSED))
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't unpause the CSEQ\n");
+ return -1;
+}
+
+/**
+ * asd_seq_pause_lseq - pause a link sequencer
+ * @asd_ha: pointer to a host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (arp2ctl & PAUSED)
+ return 0;
+
+ asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (arp2ctl & PAUSED)
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
+ return -1;
+}
+
+/**
+ * asd_pause_lseq - pause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+ int err = 0;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_pause_lseq(asd_ha, lseq);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+/**
+ * asd_seq_unpause_lseq - unpause a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (!(arp2ctl & PAUSED))
+ return 0;
+
+ asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (!(arp2ctl & PAUSED))
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
+ return 0;
+}
+
+
+/**
+ * asd_unpause_lseq - unpause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+ int err = 0;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_unpause_lseq(asd_ha, lseq);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+/* ---------- Downloading CSEQ/LSEQ microcode ---------- */
+
+static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size)
+{
+ u32 addr = CSEQ_RAM_REG_BASE_ADR;
+ const u32 *prog = (u32 *) _prog;
+ u32 i;
+
+ for (i = 0; i < size; i += 4, prog++, addr += 4) {
+ u32 val = asd_read_reg_dword(asd_ha, addr);
+
+ if (le32_to_cpu(*prog) != val) {
+ asd_printk("%s: cseq verify failed at %u "
+ "read:0x%x, wanted:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ i, val, le32_to_cpu(*prog));
+ return -1;
+ }
+ }
+ ASD_DPRINTK("verified %d bytes, passed\n", size);
+ return 0;
+}
+
+/**
+ * asd_verify_lseq - verify the microcode of a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @_prog: pointer to the microcode
+ * @size: size of the microcode in bytes
+ * @lseq: link sequencer of interest
+ *
+ * The link sequencer code is accessed in 4 KB pages, which are selected
+ * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
+ * The 10 KB LSEQm instruction code is mapped, page at a time, at
+ * LmSEQRAM address.
+ */
+static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size, int lseq)
+{
+#define LSEQ_CODEPAGE_SIZE 4096
+ int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
+ u32 page;
+ const u32 *prog = (u32 *) _prog;
+
+ for (page = 0; page < pages; page++) {
+ u32 i;
+
+ asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
+ page << LmRAMPAGE_LSHIFT);
+ for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
+ i += 4, prog++, size-=4) {
+
+ u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
+
+ if (le32_to_cpu(*prog) != val) {
+ asd_printk("%s: LSEQ%d verify failed "
+ "page:%d, offs:%d\n",
+ pci_name(asd_ha->pcidev),
+ lseq, page, i);
+ return -1;
+ }
+ }
+ }
+ ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
+ (int)((u8 *)prog-_prog));
+ return 0;
+}
+
+/**
+ * asd_verify_seq -- verify CSEQ/LSEQ microcode
+ * @asd_ha: pointer to host adapter structure
+ * @prog: pointer to microcode
+ * @size: size of the microcode
+ * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
+ *
+ * Return 0 if microcode is correct, negative on mismatch.
+ */
+static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
+ u32 size, u8 lseq_mask)
+{
+ if (lseq_mask == 0)
+ return asd_verify_cseq(asd_ha, prog, size);
+ else {
+ int lseq, err;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_verify_lseq(asd_ha, prog, size, lseq);
+ if (err)
+ return err;
+ }
+ }
+
+ return 0;
+}
+#define ASD_DMA_MODE_DOWNLOAD
+#ifdef ASD_DMA_MODE_DOWNLOAD
+/* This is the size of the CSEQ Mapped instruction page */
+#define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
+static int asd_download_seq(struct asd_ha_struct *asd_ha,
+ const u8 * const prog, u32 size, u8 lseq_mask)
+{
+ u32 comstaten;
+ u32 reg;
+ int page;
+ const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
+ struct asd_dma_tok *token;
+ int err = 0;
+
+ if (size % 4) {
+ asd_printk("sequencer program not multiple of 4\n");
+ return -1;
+ }
+
+ asd_pause_cseq(asd_ha);
+ asd_pause_lseq(asd_ha, 0xFF);
+
+ /* save, disable and clear interrupts */
+ comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
+ asd_write_reg_dword(asd_ha, COMSTATEN, 0);
+ asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
+
+ asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+ asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
+
+ token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
+ if (!token) {
+ asd_printk("out of memory for dma SEQ download\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ ASD_DPRINTK("dma-ing %d bytes\n", size);
+
+ for (page = 0; page < pages; page++) {
+ int i;
+ u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
+ (u32)MAX_DMA_OVLY_COUNT);
+
+ memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
+ asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
+ asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
+ reg = !page ? RESETOVLYDMA : 0;
+ reg |= (STARTOVLYDMA | OVLYHALTERR);
+ reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+ /* Start DMA. */
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ for (i = PAUSE_TRIES*100; i > 0; i--) {
+ u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
+ if (!(dmadone & OVLYDMAACT))
+ break;
+ udelay(PAUSE_DELAY);
+ }
+ }
+
+ reg = asd_read_reg_dword(asd_ha, COMSTAT);
+ if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
+ || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
+ asd_printk("%s: error DMA-ing sequencer code\n",
+ pci_name(asd_ha->pcidev));
+ err = -ENODEV;
+ }
+
+ asd_free_coherent(asd_ha, token);
+ out:
+ asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
+
+ return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
+}
+#else /* ASD_DMA_MODE_DOWNLOAD */
+static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size, u8 lseq_mask)
+{
+ int i;
+ u32 reg = 0;
+ const u32 *prog = (u32 *) _prog;
+
+ if (size % 4) {
+ asd_printk("sequencer program not multiple of 4\n");
+ return -1;
+ }
+
+ asd_pause_cseq(asd_ha);
+ asd_pause_lseq(asd_ha, 0xFF);
+
+ reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+ reg |= PIOCMODE;
+
+ asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
+ lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
+
+ for (i = 0; i < size; i += 4, prog++)
+ asd_write_reg_dword(asd_ha, SPIODATA, *prog);
+
+ reg = (reg & ~PIOCMODE) | OVLYHALTERR;
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
+}
+#endif /* ASD_DMA_MODE_DOWNLOAD */
+
+/**
+ * asd_seq_download_seqs - download the sequencer microcode
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Download the central and link sequencer microcode.
+ */
+static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ if (!asd_ha->hw_prof.enabled_phys) {
+ asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
+ return -ENODEV;
+ }
+
+ /* Download the CSEQ */
+ ASD_DPRINTK("downloading CSEQ...\n");
+ err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
+ if (err) {
+ asd_printk("CSEQ download failed:%d\n", err);
+ return err;
+ }
+
+ /* Download the Link Sequencers code. All of the Link Sequencers
+ * microcode can be downloaded at the same time.
+ */
+ ASD_DPRINTK("downloading LSEQs...\n");
+ err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
+ asd_ha->hw_prof.enabled_phys);
+ if (err) {
+ /* Try it one at a time */
+ u8 lseq;
+ u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_download_seq(asd_ha, lseq_code,
+ lseq_code_size, 1<<lseq);
+ if (err)
+ break;
+ }
+ }
+ if (err)
+ asd_printk("LSEQs download failed:%d\n", err);
+
+ return err;
+}
+
+/* ---------- Initializing the chip, chip memory, etc. ---------- */
+
+/**
+ * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
+{
+ /* CSEQ Mode Independent, page 4 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
+ asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
+ {
+ u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
+ u8 val = hweight8(con);
+ asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
+ }
+ asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
+
+ /* CSEQ Mode independent, page 5 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
+
+ /* CSEQ Mode independent, page 6 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
+ asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
+ /* Calculate the free scb mask. */
+ {
+ u16 cmdctx = asd_get_cmdctx_size(asd_ha);
+ cmdctx = (~((cmdctx/128)-1)) >> 8;
+ asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
+ }
+ asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
+ first_scb_site_no);
+ asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
+ last_scb_site_no);
+ asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
+
+ /* CSEQ Mode independent, page 7 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
+ asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
+}
+
+/**
+ * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ int moffs;
+
+ moffs = CSEQ_PAGE_SIZE * 2;
+
+ /* CSEQ Mode dependent, modes 0-7, page 0 setup. */
+ for (i = 0; i < 8; i++) {
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
+ asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
+ }
+
+ /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
+
+ /* CSEQ Mode dependent, mode 8, page 0 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
+ asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
+ asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
+ asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
+ asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
+ asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
+ (u16)last_scb_site_no+1);
+ asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
+ (u16)asd_ha->hw_prof.max_ddbs);
+
+ /* CSEQ Mode dependent, mode 8, page 1 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
+
+ /* CSEQ Mode dependent, mode 8, page 2 setup. */
+ /* Tell the sequencer the bus address of the first SCB. */
+ asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
+ asd_ha->seq.next_scb.dma_handle);
+ ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
+ (unsigned long long)asd_ha->seq.next_scb.dma_handle);
+
+ /* Tell the sequencer the first Done List entry address. */
+ asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
+ asd_ha->seq.actual_dl->dma_handle);
+
+ /* Initialize the Q_DONE_POINTER with the least significant
+ * 4 bytes of the first Done List address. */
+ asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
+ ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
+
+ asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
+
+ /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
+}
+
+/**
+ * asd_init_cseq_scratch -- setup and init CSEQ
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Setup and initialize Central sequencers. Initialiaze the mode
+ * independent and dependent scratch page to the default settings.
+ */
+static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
+{
+ asd_init_cseq_mip(asd_ha);
+ asd_init_cseq_mdp(asd_ha);
+}
+
+/**
+ * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
+{
+ int i;
+
+ /* LSEQ Mode independent page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
+ asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
+ ASD_NOTIFY_ENABLE_SPINUP);
+ asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
+ asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
+
+ /* LSEQ Mode independent page 1 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
+
+ /* LSEQ Mode Independent page 2 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
+ for (i = 0; i < 12; i += 4)
+ asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
+
+ /* LSEQ Mode Independent page 3 setup. */
+
+ /* Device present timer timeout */
+ asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
+ ASD_DEV_PRESENT_TIMEOUT);
+
+ /* SATA interlock timer disabled */
+ asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
+ ASD_SATA_INTERLOCK_TIMEOUT);
+
+ /* STP shutdown timer timeout constant, IGNORED by the sequencer,
+ * always 0. */
+ asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
+ ASD_STP_SHUTDOWN_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
+ ASD_SRST_ASSERT_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
+ ASD_RCV_FIS_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
+ ASD_ONE_MILLISEC_TIMEOUT);
+
+ /* COM_INIT timer */
+ asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
+ ASD_TEN_MILLISEC_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
+ ASD_SMP_RCV_TIMEOUT);
+}
+
+/**
+ * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
+{
+ int i;
+ u32 moffs;
+ u16 ret_addr[] = {
+ 0xFFFF, /* mode 0 */
+ 0xFFFF, /* mode 1 */
+ mode2_task, /* mode 2 */
+ 0,
+ 0xFFFF, /* mode 4/5 */
+ 0xFFFF, /* mode 4/5 */
+ };
+
+ /*
+ * Mode 0,1,2 and 4/5 have common field on page 0 for the first
+ * 14 bytes.
+ */
+ for (i = 0; i < 3; i++) {
+ moffs = i * LSEQ_MODE_SCRATCH_SIZE;
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
+ ret_addr[i]);
+ asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
+ asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
+ asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
+ }
+ /*
+ * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
+ */
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
+ ret_addr[5]);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+ asd_write_reg_byte(asd_ha,
+ LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+
+ /* LSEQ Mode dependent 0, page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
+ (u16)asd_ha->hw_prof.max_ddbs);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
+ (u16)last_scb_site_no+1);
+ asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
+ (u16) LmM0INTEN_MASK & 0xFFFF0000 >> 16);
+ asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
+ (u16) LmM0INTEN_MASK & 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
+
+ /* LSEQ mode dependent, mode 1, page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
+
+ /* LSEQ Mode dependent mode 2, page 0 setup */
+ asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
+
+ /* LSEQ Mode dependent, mode 4/5, page 0 setup. */
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
+ /*
+ * Set the desired interval between transmissions of the NOTIFY
+ * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ */
+ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
+ ASD_NOTIFY_TIMEOUT - 1);
+ /* No delay for the first NOTIFY to be sent to the attached target. */
+ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
+ ASD_NOTIFY_DOWN_COUNT);
+
+ /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
+ for (i = 0; i < 2; i++) {
+ int j;
+ /* Start from Page 1 of Mode 0 and 1. */
+ moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
+ /* All the fields of page 1 can be intialized to 0. */
+ for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
+ asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
+ }
+
+ /* LSEQ Mode dependent, mode 2, page 1 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
+
+ /* LSEQ Mode dependent, mode 4/5, page 1. */
+ for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
+ asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
+ asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
+
+ /* LSEQ Mode dependent, mode 0, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
+
+ /* LSEQ Mode Dependent 1, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
+
+ /* LSEQ Mode Dependent 2, page 2 setup. */
+ /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
+ * i.e. always 0. */
+ asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
+ asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
+ asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
+
+ /* LSEQ Mode Dependent 4/5, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
+}
+
+/**
+ * asd_init_lseq_scratch -- setup and init link sequencers
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
+{
+ u8 lseq;
+ u8 lseq_mask;
+
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ asd_init_lseq_mip(asd_ha, lseq);
+ asd_init_lseq_mdp(asd_ha, lseq);
+ }
+}
+
+/**
+ * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This should be done before initializing common CSEQ and LSEQ
+ * scratch since those areas depend on some computed values here,
+ * last_scb_site_no, etc.
+ */
+static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
+{
+ u16 site_no;
+ u16 max_scbs = 0;
+
+ for (site_no = asd_ha->hw_prof.max_scbs-1;
+ site_no != (u16) -1;
+ site_no--) {
+ u16 i;
+
+ /* Initialize all fields in the SCB site to 0. */
+ for (i = 0; i < ASD_SCB_SIZE; i += 4)
+ asd_scbsite_write_dword(asd_ha, site_no, i, 0);
+
+ /* Workaround needed by SEQ to fix a SATA issue is to exclude
+ * certain SCB sites from the free list. */
+ if (!SCB_SITE_VALID(site_no))
+ continue;
+
+ if (last_scb_site_no == 0)
+ last_scb_site_no = site_no;
+
+ /* For every SCB site, we need to initialize the
+ * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
+ * and SG Element Flag. */
+
+ /* Q_NEXT field of the last SCB is invalidated. */
+ asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
+
+ /* Initialize SCB Site Opcode field to invalid. */
+ asd_scbsite_write_byte(asd_ha, site_no,
+ offsetof(struct scb_header, opcode),
+ 0xFF);
+
+ /* Initialize SCB Site Flags field to mean a response
+ * frame has been received. This means inadvertent
+ * frames received to be dropped. */
+ asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
+
+ first_scb_site_no = site_no;
+ max_scbs++;
+ }
+ asd_ha->hw_prof.max_scbs = max_scbs;
+ ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
+ ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
+ ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
+}
+
+/**
+ * asd_init_cseq_cio - initialize CSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
+ asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
+ asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
+ asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
+ asd_ha->seq.scbpro = 0;
+ asd_write_reg_dword(asd_ha, SCBPRO, 0);
+ asd_write_reg_dword(asd_ha, CSEQCON, 0);
+
+ /* Intialize CSEQ Mode 11 Interrupt Vectors.
+ * The addresses are 16 bit wide and in dword units.
+ * The values of their macros are in byte units.
+ * Thus we have to divide by 4. */
+ asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
+ asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
+ asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
+
+ /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+ asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
+
+ /* Initialize CSEQ Scratch Page to 0x04. */
+ asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
+
+ /* Initialize CSEQ Mode[0-8] Dependent registers. */
+ /* Initialize Scratch Page to 0. */
+ for (i = 0; i < 9; i++)
+ asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
+
+ /* Reset the ARP2 Program Count. */
+ asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+ for (i = 0; i < 8; i++) {
+ /* Intialize Mode n Link m Interrupt Enable. */
+ asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
+ /* Initialize Mode n Request Mailbox. */
+ asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
+ }
+}
+
+/**
+ * asd_init_lseq_cio -- initialize LmSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u8 *sas_addr;
+ int i;
+
+ /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+ asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
+
+ asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
+
+ /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
+ for (i = 0; i < 3; i++)
+ asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
+
+ /* Initialize Mode 5 SCRATCHPAGE to 0. */
+ asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
+
+ asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
+ /* Initialize Mode 0,1,2 and 5 Interrupt Enable and
+ * Interrupt registers. */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
+ /* Mode 1 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
+ /* Mode 2 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
+ /* Mode 5 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
+
+ /* Enable HW Timer status. */
+ asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
+
+ /* Enable Primitive Status 0 and 1. */
+ asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
+ asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
+
+ /* Enable Frame Error. */
+ asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
+ asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
+
+ /* Initialize Mode 0 Transfer Level to 512. */
+ asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
+ /* Initialize Mode 1 Transfer Level to 256. */
+ asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
+
+ /* Initialize Program Count. */
+ asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+ /* Enable Blind SG Move. */
+ asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
+ asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
+ ASD_SATA_INTERLOCK_TIMEOUT);
+
+ (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
+
+ /* Clear Primitive Status 0 and 1. */
+ asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
+ asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
+
+ /* Clear HW Timer status. */
+ asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
+
+ /* Clear DMA Errors for Mode 0 and 1. */
+ asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
+ asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
+
+ /* Clear SG DMA Errors for Mode 0 and 1. */
+ asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
+ asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
+
+ /* Clear Mode 0 Buffer Parity Error. */
+ asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
+
+ /* Clear Mode 0 Frame Error register. */
+ asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
+
+ /* Reset LSEQ external interrupt arbiter. */
+ asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
+
+ /* Set the Phy SAS for the LmSEQ WWN. */
+ sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
+ for (i = 0; i < SAS_ADDR_SIZE; i++)
+ asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
+
+ /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
+ asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
+
+ /* Set the Bus Inactivity Time Limit Timer. */
+ asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
+
+ /* Enable SATA Port Multiplier. */
+ asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
+
+ /* Initialize Interrupt Vector[0-10] address in Mode 3.
+ * See the comment on CSEQ_INT_* */
+ asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
+ /*
+ * Program the Link LED control, applicable only for
+ * Chip Rev. B or later.
+ */
+ asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
+ (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
+
+ /* Set the Align Rate for SAS and STP mode. */
+ asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
+ asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
+}
+
+
+/**
+ * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
+ for (i = 0; i < 8; i++)
+ asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
+ /* Reset the external interrupt arbiter. */
+ asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
+}
+
+/**
+ * asd_init_ddb_0 -- initialize DDB 0
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Initialize DDB site 0 which is used internally by the sequencer.
+ */
+static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ /* Zero out the DDB explicitly */
+ for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
+ asd_ddbsite_write_dword(asd_ha, 0, i, 0);
+
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
+ asd_ha->hw_prof.max_ddbs-1);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
+ asd_ha->hw_prof.num_phys * 2);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
+ /* DDB 0 is reserved */
+ set_bit(0, asd_ha->hw_prof.ddb_bitmap);
+}
+
+/**
+ * asd_seq_setup_seqs -- setup and initialize central and link sequencers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
+{
+ int lseq;
+ u8 lseq_mask;
+
+ /* Initialize SCB sites. Done first to compute some values which
+ * the rest of the init code depends on. */
+ asd_init_scb_sites(asd_ha);
+
+ /* Initialize CSEQ Scratch RAM registers. */
+ asd_init_cseq_scratch(asd_ha);
+
+ /* Initialize LmSEQ Scratch RAM registers. */
+ asd_init_lseq_scratch(asd_ha);
+
+ /* Initialize CSEQ CIO registers. */
+ asd_init_cseq_cio(asd_ha);
+
+ asd_init_ddb_0(asd_ha);
+
+ /* Initialize LmSEQ CIO registers. */
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq)
+ asd_init_lseq_cio(asd_ha, lseq);
+ asd_post_init_cseq(asd_ha);
+}
+
+
+/**
+ * asd_seq_start_cseq -- start the central sequencer, CSEQ
+ * @asd_ha: pointer to host adapter structure
+ */
+static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
+{
+ /* Reset the ARP2 instruction to location zero. */
+ asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+ /* Unpause the CSEQ */
+ return asd_unpause_cseq(asd_ha);
+}
+
+/**
+ * asd_seq_start_lseq -- start a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: the link sequencer of interest
+ */
+static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ /* Reset the ARP2 instruction to location zero. */
+ asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+ /* Unpause the LmSEQ */
+ return asd_seq_unpause_lseq(asd_ha, lseq);
+}
+
+static int asd_request_firmware(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+ struct sequencer_file_header header, *hdr_ptr;
+ u32 csum = 0;
+ u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
+
+ if (sequencer_fw)
+ /* already loaded */
+ return 0;
+
+ err = request_firmware(&sequencer_fw,
+ SAS_RAZOR_SEQUENCER_FW_FILE,
+ &asd_ha->pcidev->dev);
+ if (err)
+ return err;
+
+ hdr_ptr = (struct sequencer_file_header *)sequencer_fw->data;
+
+ header.csum = le32_to_cpu(hdr_ptr->csum);
+ header.major = le32_to_cpu(hdr_ptr->major);
+ header.minor = le32_to_cpu(hdr_ptr->minor);
+ sequencer_version = hdr_ptr->version;
+ header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
+ header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
+ header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
+ header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
+ header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
+ header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
+ header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
+ header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
+ header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
+ header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
+ header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
+
+ for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
+ csum += sequencer_fw->data[i];
+
+ if (csum != header.csum) {
+ asd_printk("Firmware file checksum mismatch\n");
+ return -EINVAL;
+ }
+
+ if (header.cseq_table_size != CSEQ_NUM_VECS ||
+ header.lseq_table_size != LSEQ_NUM_VECS) {
+ asd_printk("Firmware file table size mismatch\n");
+ return -EINVAL;
+ }
+
+ ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
+ ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
+ mode2_task = header.mode2_task;
+ cseq_idle_loop = header.cseq_idle_loop;
+ lseq_idle_loop = header.lseq_idle_loop;
+
+ for (i = 0; i < CSEQ_NUM_VECS; i++)
+ cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
+
+ for (i = 0; i < LSEQ_NUM_VECS; i++)
+ lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
+
+ cseq_code = &sequencer_fw->data[header.cseq_code_offset];
+ cseq_code_size = header.cseq_code_size;
+ lseq_code = &sequencer_fw->data[header.lseq_code_offset];
+ lseq_code_size = header.lseq_code_size;
+
+ return 0;
+}
+
+int asd_init_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_request_firmware(asd_ha);
+
+ if (err) {
+ asd_printk("Failed to load sequencer firmware file %s, error %d\n",
+ SAS_RAZOR_SEQUENCER_FW_FILE, err);
+ return err;
+ }
+
+ asd_printk("using sequencer %s\n", sequencer_version);
+ err = asd_seq_download_seqs(asd_ha);
+ if (err) {
+ asd_printk("couldn't download sequencers for %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ asd_seq_setup_seqs(asd_ha);
+
+ return 0;
+}
+
+int asd_start_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u8 lseq_mask;
+ int lseq;
+
+ err = asd_seq_start_cseq(asd_ha);
+ if (err) {
+ asd_printk("couldn't start CSEQ for %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_start_lseq(asd_ha, lseq);
+ if (err) {
+ asd_printk("coudln't start LSEQ %d for %s\n", lseq,
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * asd_update_port_links -- update port_map_by_links and phy_is_up
+ * @sas_phy: pointer to the phy which has been added to a port
+ *
+ * 1) When a link reset has completed and we got BYTES DMAED with a
+ * valid frame we call this function for that phy, to indicate that
+ * the phy is up, i.e. we update the phy_is_up in DDB 0. The
+ * sequencer checks phy_is_up when pending SCBs are to be sent, and
+ * when an open address frame has been received.
+ *
+ * 2) When we know of ports, we call this function to update the map
+ * of phys participaing in that port, i.e. we update the
+ * port_map_by_links in DDB 0. When a HARD_RESET primitive has been
+ * received, the sequencer disables all phys in that port.
+ * port_map_by_links is also used as the conn_mask byte in the
+ * initiator/target port DDB.
+ */
+void asd_update_port_links(struct asd_sas_phy *sas_phy)
+{
+ struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
+ const u8 phy_mask = (u8) sas_phy->port->phy_mask;
+ u8 phy_is_up;
+ u8 mask;
+ int i, err;
+
+ for_each_phy(phy_mask, mask, i)
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared,
+ port_map_by_links)+i,phy_mask);
+
+ for (i = 0; i < 12; i++) {
+ phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up));
+ err = asd_ddbsite_update_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up),
+ phy_is_up,
+ phy_is_up | phy_mask);
+ if (!err)
+ break;
+ else if (err == -EFAULT) {
+ asd_printk("phy_is_up: parity error in DDB 0\n");
+ break;
+ }
+ }
+
+ if (err)
+ asd_printk("couldn't update DDB 0:error:%d\n", err);
+}
+
+MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE);
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h
new file mode 100644
index 0000000..42281c3
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h
@@ -0,0 +1,70 @@
+/*
+ * Aic94xx SAS/SATA driver sequencer interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_SEQ_H_
+#define _AIC94XX_SEQ_H_
+
+#define CSEQ_NUM_VECS 3
+#define LSEQ_NUM_VECS 11
+
+#define SAS_RAZOR_SEQUENCER_FW_FILE "aic94xx-seq.fw"
+
+/* Note: All quantites in the sequencer file are little endian */
+struct sequencer_file_header {
+ /* Checksum of the entire contents of the sequencer excluding
+ * these four bytes */
+ u32 csum;
+ /* numeric major version */
+ u32 major;
+ /* numeric minor version */
+ u32 minor;
+ /* version string printed by driver */
+ char version[16];
+ u32 cseq_table_offset;
+ u32 cseq_table_size;
+ u32 lseq_table_offset;
+ u32 lseq_table_size;
+ u32 cseq_code_offset;
+ u32 cseq_code_size;
+ u32 lseq_code_offset;
+ u32 lseq_code_size;
+ u16 mode2_task;
+ u16 cseq_idle_loop;
+ u16 lseq_idle_loop;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+int asd_pause_cseq(struct asd_ha_struct *asd_ha);
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha);
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_init_seqs(struct asd_ha_struct *asd_ha);
+int asd_start_seqs(struct asd_ha_struct *asd_ha);
+
+void asd_update_port_links(struct asd_sas_phy *phy);
+#endif
+
+#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
new file mode 100644
index 0000000..285e70d
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -0,0 +1,642 @@
+/*
+ * Aic94xx SAS/SATA Tasks
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a);
+static void asd_unbuild_smp_ascb(struct asd_ascb *a);
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a);
+
+static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_ha->seq.can_queue += num;
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+}
+
+/* PCI_DMA_... to our direction translation.
+ */
+static const u8 data_dir_flags[] = {
+ [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */
+ [PCI_DMA_TODEVICE] = DATA_DIR_OUT, /* OUTBOUND */
+ [PCI_DMA_FROMDEVICE] = DATA_DIR_IN, /* INBOUND */
+ [PCI_DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */
+};
+
+static inline int asd_map_scatterlist(struct sas_task *task,
+ struct sg_el *sg_arr,
+ unsigned long gfp_flags)
+{
+ struct asd_ascb *ascb = task->lldd_task;
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct scatterlist *sc;
+ int num_sg, res;
+
+ if (task->data_dir == PCI_DMA_NONE)
+ return 0;
+
+ if (task->num_scatter == 0) {
+ void *p = task->scatter;
+ dma_addr_t dma = pci_map_single(asd_ha->pcidev, p,
+ task->total_xfer_len,
+ task->data_dir);
+ sg_arr[0].bus_addr = cpu_to_le64((u64)dma);
+ sg_arr[0].size = cpu_to_le32(task->total_xfer_len);
+ sg_arr[0].flags |= ASD_SG_EL_LIST_EOL;
+ return 0;
+ }
+
+ num_sg = pci_map_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+ if (num_sg == 0)
+ return -ENOMEM;
+
+ if (num_sg > 3) {
+ int i;
+
+ ascb->sg_arr = asd_alloc_coherent(asd_ha,
+ num_sg*sizeof(struct sg_el),
+ gfp_flags);
+ if (!ascb->sg_arr) {
+ res = -ENOMEM;
+ goto err_unmap;
+ }
+ for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+ struct sg_el *sg =
+ &((struct sg_el *)ascb->sg_arr->vaddr)[i];
+ sg->bus_addr = cpu_to_le64((u64)sg_dma_address(sc));
+ sg->size = cpu_to_le32((u32)sg_dma_len(sc));
+ if (i == num_sg-1)
+ sg->flags |= ASD_SG_EL_LIST_EOL;
+ }
+
+ for (sc = task->scatter, i = 0; i < 2; i++, sc++) {
+ sg_arr[i].bus_addr =
+ cpu_to_le64((u64)sg_dma_address(sc));
+ sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+ }
+ sg_arr[1].next_sg_offs = 2 * sizeof(*sg_arr);
+ sg_arr[1].flags |= ASD_SG_EL_LIST_EOS;
+
+ memset(&sg_arr[2], 0, sizeof(*sg_arr));
+ sg_arr[2].bus_addr=cpu_to_le64((u64)ascb->sg_arr->dma_handle);
+ } else {
+ int i;
+ for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+ sg_arr[i].bus_addr =
+ cpu_to_le64((u64)sg_dma_address(sc));
+ sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+ }
+ sg_arr[i-1].flags |= ASD_SG_EL_LIST_EOL;
+ }
+
+ return 0;
+err_unmap:
+ pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+ return res;
+}
+
+static inline void asd_unmap_scatterlist(struct asd_ascb *ascb)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_task *task = ascb->uldd_task;
+
+ if (task->data_dir == PCI_DMA_NONE)
+ return;
+
+ if (task->num_scatter == 0) {
+ dma_addr_t dma = (dma_addr_t)
+ le64_to_cpu(ascb->scb->ssp_task.sg_element[0].bus_addr);
+ pci_unmap_single(ascb->ha->pcidev, dma, task->total_xfer_len,
+ task->data_dir);
+ return;
+ }
+
+ asd_free_coherent(asd_ha, ascb->sg_arr);
+ pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+}
+
+/* ---------- Task complete tasklet ---------- */
+
+static void asd_get_response_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_task *task = ascb->uldd_task;
+ struct task_status_struct *ts = &task->task_status;
+ unsigned long flags;
+ struct tc_resp_sb_struct {
+ __le16 index_escb;
+ u8 len_lsb;
+ u8 flags;
+ } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+/* int size = ((resp_sb->flags & 7) << 8) | resp_sb->len_lsb; */
+ int edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+ struct asd_ascb *escb;
+ struct asd_dma_tok *edb;
+ void *r;
+
+ spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+ escb = asd_tc_index_find(&asd_ha->seq,
+ (int)le16_to_cpu(resp_sb->index_escb));
+ spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+ if (!escb) {
+ ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+ return;
+ }
+
+ ts->buf_valid_size = 0;
+ edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+ r = edb->vaddr;
+ if (task->task_proto == SAS_PROTO_SSP) {
+ struct ssp_response_iu *iu =
+ r + 16 + sizeof(struct ssp_frame_hdr);
+
+ ts->residual = le32_to_cpu(*(__le32 *)r);
+ ts->resp = SAS_TASK_COMPLETE;
+ if (iu->datapres == 0)
+ ts->stat = iu->status;
+ else if (iu->datapres == 1)
+ ts->stat = iu->resp_data[3];
+ else if (iu->datapres == 2) {
+ ts->stat = SAM_CHECK_COND;
+ ts->buf_valid_size = min((u32) SAS_STATUS_BUF_SIZE,
+ be32_to_cpu(iu->sense_data_len));
+ memcpy(ts->buf, iu->sense_data, ts->buf_valid_size);
+ if (iu->status != SAM_CHECK_COND) {
+ ASD_DPRINTK("device %llx sent sense data, but "
+ "stat(0x%x) is not CHECK_CONDITION"
+ "\n",
+ SAS_ADDR(task->dev->sas_addr),
+ ts->stat);
+ }
+ }
+ } else {
+ struct ata_task_resp *resp = (void *) &ts->buf[0];
+
+ ts->residual = le32_to_cpu(*(__le32 *)r);
+
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
+ memcpy(&resp->ending_fis[0], r+16, 24);
+ ts->buf_valid_size = sizeof(*resp);
+ }
+ }
+
+ asd_invalidate_edb(escb, edb_id);
+}
+
+static void asd_task_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct sas_task *task = ascb->uldd_task;
+ struct task_status_struct *ts = &task->task_status;
+ unsigned long flags;
+ u8 opcode = dl->opcode;
+
+ asd_can_dequeue(ascb->ha, 1);
+
+Again:
+ switch (opcode) {
+ case TC_NO_ERROR:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ break;
+ case TC_UNDERRUN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = le32_to_cpu(*(__le32 *)dl->status_block);
+ break;
+ case TC_OVERRUN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ case TC_SSP_RESP:
+ case TC_ATA_RESP:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ asd_get_response_tasklet(ascb, dl);
+ break;
+ case TF_OPEN_REJECT:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ if (dl->status_block[1] & 2)
+ ts->open_rej_reason = 1 + dl->status_block[2];
+ else if (dl->status_block[1] & 1)
+ ts->open_rej_reason = (dl->status_block[2] >> 4)+10;
+ else
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case TF_OPEN_TO:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case TF_PHY_DOWN:
+ case TU_PHY_DOWN:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case TI_PHY_DOWN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case TI_BREAK:
+ case TI_PROTO_ERR:
+ case TI_NAK:
+ case TI_ACK_NAK_TO:
+ case TF_SMP_XMIT_RCV_ERR:
+ case TC_ATA_R_ERR_RECV:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case TF_BREAK:
+ case TU_BREAK:
+ case TU_ACK_NAK_TO:
+ case TF_SMPRSP_TO:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case TF_NAK_RECV:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case TA_I_T_NEXUS_LOSS:
+ opcode = dl->status_block[0];
+ goto Again;
+ break;
+ case TF_INV_CONN_HANDLE:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEVICE_UNKNOWN;
+ break;
+ case TF_REQUESTED_N_PENDING:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PENDING;
+ break;
+ case TC_TASK_CLEARED:
+ case TA_ON_REQ:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+
+ case TF_NO_SMP_CONN:
+ case TF_TMF_NO_CTX:
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE:
+ case TF_TMF_TASK_DONE:
+ case TF_TMF_NO_CONN_HANDLE:
+ case TF_IRTT_TO:
+ case TF_IU_SHORT:
+ case TF_DATA_OFFS_ERR:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+
+ case TC_LINK_ADM_RESP:
+ case TC_CONTROL_PHY:
+ case TC_RESUME:
+ case TC_PARTIAL_SG_LIST:
+ default:
+ ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode);
+ break;
+ }
+
+ switch (task->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ asd_unbuild_ata_ascb(ascb);
+ break;
+ case SAS_PROTO_SMP:
+ asd_unbuild_smp_ascb(ascb);
+ break;
+ case SAS_PROTO_SSP:
+ asd_unbuild_ssp_ascb(ascb);
+ default:
+ break;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ task, opcode, ts->resp, ts->stat);
+ complete(&ascb->completion);
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ task->lldd_task = NULL;
+ asd_ascb_free(ascb);
+ mb();
+ task->task_done(task);
+ }
+}
+
+/* ---------- ATA ---------- */
+
+static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+ u8 flags;
+ int res = 0;
+
+ scb = ascb->scb;
+
+ if (unlikely(task->ata_task.device_control_reg_update))
+ scb->header.opcode = CONTROL_ATA_DEV;
+ else if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+ scb->header.opcode = INITIATE_ATA_TASK;
+ else
+ scb->header.opcode = INITIATE_ATAPI_TASK;
+
+ scb->ata_task.proto_conn_rate = (1 << 5); /* STP */
+ if (dev->port->oob_mode == SAS_OOB_MODE)
+ scb->ata_task.proto_conn_rate |= dev->linkrate;
+
+ scb->ata_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+ scb->ata_task.fis = task->ata_task.fis;
+ scb->ata_task.fis.fis_type = 0x27;
+ if (likely(!task->ata_task.device_control_reg_update))
+ scb->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+ scb->ata_task.fis.flags &= 0xF0; /* PM_PORT field shall be 0 */
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+ memcpy(scb->ata_task.atapi_packet, task->ata_task.atapi_packet,
+ 16);
+ scb->ata_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ata_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)dev->lldd_dev);
+
+ if (likely(!task->ata_task.device_control_reg_update)) {
+ flags = 0;
+ if (task->ata_task.dma_xfer)
+ flags |= DATA_XFER_MODE_DMA;
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.command_set != ATAPI_COMMAND_SET)
+ flags |= ATA_Q_TYPE_NCQ;
+ flags |= data_dir_flags[task->data_dir];
+ scb->ata_task.ata_flags = flags;
+
+ scb->ata_task.retry_count = task->ata_task.retry_count;
+
+ flags = 0;
+ if (task->ata_task.set_affil_pol)
+ flags |= SET_AFFIL_POLICY;
+ if (task->ata_task.stp_affil_pol)
+ flags |= STP_AFFIL_POLICY;
+ scb->ata_task.flags = flags;
+ }
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ if (likely(!task->ata_task.device_control_reg_update))
+ res = asd_map_scatterlist(task, scb->ata_task.sg_element,
+ gfp_flags);
+
+ return res;
+}
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a)
+{
+ asd_unmap_scatterlist(a);
+}
+
+/* ---------- SMP ---------- */
+
+static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+
+ pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
+ PCI_DMA_FROMDEVICE);
+ pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+
+ scb = ascb->scb;
+
+ scb->header.opcode = INITIATE_SMP_TASK;
+
+ scb->smp_task.proto_conn_rate = dev->linkrate;
+
+ scb->smp_task.smp_req.bus_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ scb->smp_task.smp_req.size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+
+ scb->smp_task.smp_resp.bus_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+ scb->smp_task.smp_resp.size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+
+ scb->smp_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->smp_task.conn_handle = cpu_to_le16((u16)
+ (unsigned long)dev->lldd_dev);
+
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ return 0;
+}
+
+static void asd_unbuild_smp_ascb(struct asd_ascb *a)
+{
+ struct sas_task *task = a->uldd_task;
+
+ BUG_ON(!task);
+ pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+}
+
+/* ---------- SSP ---------- */
+
+static int asd_build_ssp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+ int res = 0;
+
+ scb = ascb->scb;
+
+ scb->header.opcode = INITIATE_SSP_TASK;
+
+ scb->ssp_task.proto_conn_rate = (1 << 4); /* SSP */
+ scb->ssp_task.proto_conn_rate |= dev->linkrate;
+ scb->ssp_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+ scb->ssp_task.ssp_frame.frame_type = SSP_DATA;
+ memcpy(scb->ssp_task.ssp_frame.hashed_dest_addr, dev->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->ssp_task.ssp_frame.hashed_src_addr,
+ dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ scb->ssp_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+ memcpy(scb->ssp_task.ssp_cmd.lun, task->ssp_task.LUN, 8);
+ if (task->ssp_task.enable_first_burst)
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= EFB_MASK;
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(scb->ssp_task.ssp_cmd.cdb, task->ssp_task.cdb, 16);
+
+ scb->ssp_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ssp_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)dev->lldd_dev);
+ scb->ssp_task.data_dir = data_dir_flags[task->data_dir];
+ scb->ssp_task.retry_count = scb->ssp_task.retry_count;
+
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ res = asd_map_scatterlist(task, scb->ssp_task.sg_element, gfp_flags);
+
+ return res;
+}
+
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a)
+{
+ asd_unmap_scatterlist(a);
+}
+
+/* ---------- Execute Task ---------- */
+
+static inline int asd_can_queue(struct asd_ha_struct *asd_ha, int num)
+{
+ int res = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ if ((asd_ha->seq.can_queue - num) < 0)
+ res = -SAS_QUEUE_FULL;
+ else
+ asd_ha->seq.can_queue -= num;
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return res;
+}
+
+int asd_execute_task(struct sas_task *task, const int num,
+ unsigned long gfp_flags)
+{
+ int res = 0;
+ LIST_HEAD(alist);
+ struct sas_task *t = task;
+ struct asd_ascb *ascb = NULL, *a;
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+
+ res = asd_can_queue(asd_ha, num);
+ if (res)
+ return res;
+
+ res = num;
+ ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags);
+ if (res) {
+ res = -ENOMEM;
+ goto out_err;
+ }
+
+ __list_add(&alist, ascb->list.prev, &ascb->list);
+ list_for_each_entry(a, &alist, list) {
+ a->uldd_task = t;
+ t->lldd_task = a;
+ t = list_entry(t->list.next, struct sas_task, list);
+ }
+ list_for_each_entry(a, &alist, list) {
+ t = a->uldd_task;
+ a->uldd_timer = 1;
+ if (t->task_proto & SAS_PROTO_STP)
+ t->task_proto = SAS_PROTO_STP;
+ switch (t->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ res = asd_build_ata_ascb(a, t, gfp_flags);
+ break;
+ case SAS_PROTO_SMP:
+ res = asd_build_smp_ascb(a, t, gfp_flags);
+ break;
+ case SAS_PROTO_SSP:
+ res = asd_build_ssp_ascb(a, t, gfp_flags);
+ break;
+ default:
+ asd_printk("unknown sas_task proto: 0x%x\n",
+ t->task_proto);
+ res = -ENOMEM;
+ break;
+ }
+ if (res)
+ goto out_err_unmap;
+ }
+ list_del_init(&alist);
+
+ res = asd_post_ascb_list(asd_ha, ascb, num);
+ if (unlikely(res)) {
+ a = NULL;
+ __list_add(&alist, ascb->list.prev, &ascb->list);
+ goto out_err_unmap;
+ }
+
+ return 0;
+out_err_unmap:
+ {
+ struct asd_ascb *b = a;
+ list_for_each_entry(a, &alist, list) {
+ if (a == b)
+ break;
+ t = a->uldd_task;
+ switch (t->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ asd_unbuild_ata_ascb(a);
+ break;
+ case SAS_PROTO_SMP:
+ asd_unbuild_smp_ascb(a);
+ break;
+ case SAS_PROTO_SSP:
+ asd_unbuild_ssp_ascb(a);
+ default:
+ break;
+ }
+ t->lldd_task = NULL;
+ }
+ }
+ list_del_init(&alist);
+out_err:
+ if (ascb)
+ asd_ascb_free_list(ascb);
+ asd_can_dequeue(asd_ha, num);
+ return res;
+}
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
new file mode 100644
index 0000000..6123438
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -0,0 +1,636 @@
+/*
+ * Aic94xx Task Management Functions
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+/* ---------- Internal enqueue ---------- */
+
+static int asd_enqueue_internal(struct asd_ascb *ascb,
+ void (*tasklet_complete)(struct asd_ascb *,
+ struct done_list_struct *),
+ void (*timed_out)(unsigned long))
+{
+ int res;
+
+ ascb->tasklet_complete = tasklet_complete;
+ ascb->uldd_timer = 1;
+
+ ascb->timer.data = (unsigned long) ascb;
+ ascb->timer.function = timed_out;
+ ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+
+ add_timer(&ascb->timer);
+
+ res = asd_post_ascb_list(ascb->ha, ascb, 1);
+ if (unlikely(res))
+ del_timer(&ascb->timer);
+ return res;
+}
+
+static inline void asd_timedout_common(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ seq->pending--;
+ list_del_init(&ascb->list);
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+}
+
+/* ---------- CLEAR NEXUS ---------- */
+
+static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ ASD_DPRINTK("%s: here\n", __FUNCTION__);
+ if (!del_timer(&ascb->timer)) {
+ ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
+ return;
+ }
+ ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
+ ascb->uldd_task = (void *) (unsigned long) dl->opcode;
+ complete(&ascb->completion);
+}
+
+static void asd_clear_nexus_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+
+ ASD_DPRINTK("%s: here\n", __FUNCTION__);
+ asd_timedout_common(data);
+ ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+ complete(&ascb->completion);
+}
+
+#define CLEAR_NEXUS_PRE \
+ ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
+ res = 1; \
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
+ if (!ascb) \
+ return -ENOMEM; \
+ \
+ scb = ascb->scb; \
+ scb->header.opcode = CLEAR_NEXUS
+
+#define CLEAR_NEXUS_POST \
+ ASD_DPRINTK("%s: POST\n", __FUNCTION__); \
+ res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \
+ asd_clear_nexus_timedout); \
+ if (res) \
+ goto out_err; \
+ ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
+ wait_for_completion(&ascb->completion); \
+ res = (int) (unsigned long) ascb->uldd_task; \
+ if (res == TC_NO_ERROR) \
+ res = TMF_RESP_FUNC_COMPLETE; \
+out_err: \
+ asd_ascb_free(ascb); \
+ return res
+
+int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha)
+{
+ struct asd_ha_struct *asd_ha = sas_ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_ADAPTER;
+ CLEAR_NEXUS_POST;
+}
+
+int asd_clear_nexus_port(struct asd_sas_port *port)
+{
+ struct asd_ha_struct *asd_ha = port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_PORT;
+ scb->clear_nexus.conn_mask = port->phy_mask;
+ CLEAR_NEXUS_POST;
+}
+
+#if 0
+static int asd_clear_nexus_I_T(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_I_T;
+ scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ if (dev->tproto)
+ scb->clear_nexus.flags |= SUSPEND_TX;
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+#endif
+
+static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_I_T_L;
+ scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ if (dev->tproto)
+ scb->clear_nexus.flags |= SUSPEND_TX;
+ memcpy(scb->clear_nexus.ssp_task.lun, lun, 8);
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_tag(struct sas_task *task)
+{
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_TAG;
+ memcpy(scb->clear_nexus.ssp_task.lun, task->ssp_task.LUN, 8);
+ scb->clear_nexus.ssp_task.tag = tascb->tag;
+ if (task->dev->tproto)
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ task->dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_index(struct sas_task *task)
+{
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_TRANS_CX;
+ if (task->dev->tproto)
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ task->dev->lldd_dev);
+ scb->clear_nexus.index = cpu_to_le16(tascb->tc_index);
+ CLEAR_NEXUS_POST;
+}
+
+/* ---------- TMFs ---------- */
+
+static void asd_tmf_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+
+ ASD_DPRINTK("tmf timed out\n");
+ asd_timedout_common(data);
+ ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+ complete(&ascb->completion);
+}
+
+static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ unsigned long flags;
+ struct tc_resp_sb_struct {
+ __le16 index_escb;
+ u8 len_lsb;
+ u8 flags;
+ } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+ int edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+ struct asd_ascb *escb;
+ struct asd_dma_tok *edb;
+ struct ssp_frame_hdr *fh;
+ struct ssp_response_iu *ru;
+ int res = TMF_RESP_FUNC_FAILED;
+
+ ASD_DPRINTK("tmf resp tasklet\n");
+
+ spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+ escb = asd_tc_index_find(&asd_ha->seq,
+ (int)le16_to_cpu(resp_sb->index_escb));
+ spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+ if (!escb) {
+ ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+ return res;
+ }
+
+ edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+ ascb->tag = *(__be16 *)(edb->vaddr+4);
+ fh = edb->vaddr + 16;
+ ru = edb->vaddr + 16 + sizeof(*fh);
+ res = ru->status;
+ if (ru->datapres == 1) /* Response data present */
+ res = ru->resp_data[3];
+#if 0
+ ascb->tag = fh->tag;
+#endif
+ ascb->tag_valid = 1;
+
+ asd_invalidate_edb(escb, edb_id);
+ return res;
+}
+
+static void asd_tmf_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ if (!del_timer(&ascb->timer))
+ return;
+
+ ASD_DPRINTK("tmf tasklet complete\n");
+
+ if (dl->opcode == TC_SSP_RESP)
+ ascb->uldd_task = (void *) (unsigned long)
+ asd_get_tmf_resp_tasklet(ascb, dl);
+ else
+ ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode;
+
+ complete(&ascb->completion);
+}
+
+static inline int asd_clear_nexus(struct sas_task *task)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct asd_ascb *tascb = task->lldd_task;
+ unsigned long flags;
+
+ ASD_DPRINTK("task not done, clearing nexus\n");
+ if (tascb->tag_valid)
+ res = asd_clear_nexus_tag(task);
+ else
+ res = asd_clear_nexus_index(task);
+ wait_for_completion_timeout(&tascb->completion,
+ AIC94XX_SCB_TIMEOUT);
+ ASD_DPRINTK("came back from clear nexus\n");
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return res;
+}
+
+/**
+ * asd_abort_task -- ABORT TASK TMF
+ * @task: the task to be aborted
+ *
+ * Before calling ABORT TASK the task state flags should be ORed with
+ * SAS_TASK_STATE_ABORTED (unless SAS_TASK_STATE_DONE is set) under
+ * the task_state_lock IRQ spinlock, then ABORT TASK *must* be called.
+ *
+ * Implements the ABORT TASK TMF, I_T_L_Q nexus.
+ * Returns: SAS TMF responses (see sas_task.h),
+ * -ENOMEM,
+ * -SAS_QUEUE_FULL.
+ *
+ * When ABORT TASK returns, the caller of ABORT TASK checks first the
+ * task->task_state_flags, and then the return value of ABORT TASK.
+ *
+ * If the task has task state bit SAS_TASK_STATE_DONE set, then the
+ * task was completed successfully prior to it being aborted. The
+ * caller of ABORT TASK has responsibility to call task->task_done()
+ * xor free the task, depending on their framework. The return code
+ * is TMF_RESP_FUNC_FAILED in this case.
+ *
+ * Else the SAS_TASK_STATE_DONE bit is not set,
+ * If the return code is TMF_RESP_FUNC_COMPLETE, then
+ * the task was aborted successfully. The caller of
+ * ABORT TASK has responsibility to call task->task_done()
+ * to finish the task, xor free the task depending on their
+ * framework.
+ * else
+ * the ABORT TASK returned some kind of error. The task
+ * was _not_ cancelled. Nothing can be assumed.
+ * The caller of ABORT TASK may wish to retry.
+ */
+int asd_abort_task(struct sas_task *task)
+{
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ha_struct *asd_ha = tascb->ha;
+ int res = 1;
+ unsigned long flags;
+ struct asd_ascb *ascb = NULL;
+ struct scb *scb;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ res = TMF_RESP_FUNC_COMPLETE;
+ ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+ goto out_done;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+ scb = ascb->scb;
+
+ scb->header.opcode = ABORT_TASK;
+
+ switch (task->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ scb->abort_task.proto_conn_rate = (1 << 5); /* STP */
+ break;
+ case SAS_PROTO_SSP:
+ scb->abort_task.proto_conn_rate = (1 << 4); /* SSP */
+ scb->abort_task.proto_conn_rate |= task->dev->linkrate;
+ break;
+ case SAS_PROTO_SMP:
+ break;
+ default:
+ break;
+ }
+
+ if (task->task_proto == SAS_PROTO_SSP) {
+ scb->abort_task.ssp_frame.frame_type = SSP_TASK;
+ memcpy(scb->abort_task.ssp_frame.hashed_dest_addr,
+ task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->abort_task.ssp_frame.hashed_src_addr,
+ task->dev->port->ha->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ scb->abort_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+ memcpy(scb->abort_task.ssp_task.lun, task->ssp_task.LUN, 8);
+ scb->abort_task.ssp_task.tmf = TMF_ABORT_TASK;
+ scb->abort_task.ssp_task.tag = cpu_to_be16(0xFFFF);
+ }
+
+ scb->abort_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->abort_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)task->dev->lldd_dev);
+ scb->abort_task.retry_count = 1;
+ scb->abort_task.index = cpu_to_le16((u16)tascb->tc_index);
+ scb->abort_task.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+
+ res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+ asd_tmf_timedout);
+ if (res)
+ goto out;
+ wait_for_completion(&ascb->completion);
+ ASD_DPRINTK("tmf came back\n");
+
+ res = (int) (unsigned long) ascb->uldd_task;
+ tascb->tag = ascb->tag;
+ tascb->tag_valid = ascb->tag_valid;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ res = TMF_RESP_FUNC_COMPLETE;
+ ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+ goto out_done;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ switch (res) {
+ /* The task to be aborted has been sent to the device.
+ * We got a Response IU for the ABORT TASK TMF. */
+ case TC_NO_ERROR + 0xFF00:
+ case TMF_RESP_FUNC_COMPLETE:
+ case TMF_RESP_FUNC_FAILED:
+ res = asd_clear_nexus(task);
+ break;
+ case TMF_RESP_INVALID_FRAME:
+ case TMF_RESP_OVERLAPPED_TAG:
+ case TMF_RESP_FUNC_ESUPP:
+ case TMF_RESP_NO_LUN:
+ goto out_done; break;
+ }
+ /* In the following we assume that the managing layer
+ * will _never_ make a mistake, when issuing ABORT TASK.
+ */
+ switch (res) {
+ default:
+ res = asd_clear_nexus(task);
+ /* fallthrough */
+ case TC_NO_ERROR + 0xFF00:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ /* The task hasn't been sent to the device xor we never got
+ * a (sane) Response IU for the ABORT TASK TMF.
+ */
+ case TF_NAK_RECV + 0xFF00:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */
+ res = TMF_RESP_FUNC_FAILED;
+ wait_for_completion_timeout(&tascb->completion,
+ AIC94XX_SCB_TIMEOUT);
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ goto out_done;
+ case TF_TMF_NO_TAG + 0xFF00:
+ case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ res = TMF_RESP_FUNC_COMPLETE;
+ goto out_done;
+ case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ goto out;
+ }
+out_done:
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ task->lldd_task = NULL;
+ mb();
+ asd_ascb_free(tascb);
+ }
+out:
+ asd_ascb_free(ascb);
+ ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
+ return res;
+}
+
+/**
+ * asd_initiate_ssp_tmf -- send a TMF to an I_T_L or I_T_L_Q nexus
+ * @dev: pointer to struct domain_device of interest
+ * @lun: pointer to u8[8] which is the LUN
+ * @tmf: the TMF to be performed (see sas_task.h or the SAS spec)
+ * @index: the transaction context of the task to be queried if QT TMF
+ *
+ * This function is used to send ABORT TASK SET, CLEAR ACA,
+ * CLEAR TASK SET, LU RESET and QUERY TASK TMFs.
+ *
+ * No SCBs should be queued to the I_T_L nexus when this SCB is
+ * pending.
+ *
+ * Returns: TMF response code (see sas_task.h or the SAS spec)
+ */
+static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun,
+ int tmf, int index)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ int res = 1;
+ struct scb *scb;
+
+ if (!(dev->tproto & SAS_PROTO_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+ scb = ascb->scb;
+
+ if (tmf == TMF_QUERY_TASK)
+ scb->header.opcode = QUERY_SSP_TASK;
+ else
+ scb->header.opcode = INITIATE_SSP_TMF;
+
+ scb->ssp_tmf.proto_conn_rate = (1 << 4); /* SSP */
+ scb->ssp_tmf.proto_conn_rate |= dev->linkrate;
+ /* SSP frame header */
+ scb->ssp_tmf.ssp_frame.frame_type = SSP_TASK;
+ memcpy(scb->ssp_tmf.ssp_frame.hashed_dest_addr,
+ dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->ssp_tmf.ssp_frame.hashed_src_addr,
+ dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ scb->ssp_tmf.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+ /* SSP Task IU */
+ memcpy(scb->ssp_tmf.ssp_task.lun, lun, 8);
+ scb->ssp_tmf.ssp_task.tmf = tmf;
+
+ scb->ssp_tmf.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ssp_tmf.conn_handle= cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ scb->ssp_tmf.retry_count = 1;
+ scb->ssp_tmf.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+ if (tmf == TMF_QUERY_TASK)
+ scb->ssp_tmf.index = cpu_to_le16(index);
+
+ res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+ asd_tmf_timedout);
+ if (res)
+ goto out_err;
+ wait_for_completion(&ascb->completion);
+ res = (int) (unsigned long) ascb->uldd_task;
+
+ switch (res) {
+ case TC_NO_ERROR + 0xFF00:
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ case TF_NAK_RECV + 0xFF00:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE + 0xFF00:
+ res = TMF_RESP_FUNC_FAILED;
+ break;
+ case TF_TMF_NO_TAG + 0xFF00:
+ case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ break;
+ default:
+ ASD_DPRINTK("%s: converting result 0x%x to TMF_RESP_FUNC_FAILED\n",
+ __FUNCTION__, res);
+ res = TMF_RESP_FUNC_FAILED;
+ break;
+ }
+out_err:
+ asd_ascb_free(ascb);
+ return res;
+}
+
+int asd_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_ABORT_TASK_SET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_clear_aca(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_ACA, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_TASK_SET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_lu_reset(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_LU_RESET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+/**
+ * asd_query_task -- send a QUERY TASK TMF to an I_T_L_Q nexus
+ * task: pointer to sas_task struct of interest
+ *
+ * Returns: TMF_RESP_FUNC_COMPLETE if the task is not in the task set,
+ * or TMF_RESP_FUNC_SUCC if the task is in the task set.
+ *
+ * Normally the management layer sets the task to aborted state,
+ * and then calls query task and then abort task.
+ */
+int asd_query_task(struct sas_task *task)
+{
+ struct asd_ascb *ascb = task->lldd_task;
+ int index;
+
+ if (ascb) {
+ index = ascb->tc_index;
+ return asd_initiate_ssp_tmf(task->dev, task->ssp_task.LUN,
+ TMF_QUERY_TASK, index);
+ }
+ return TMF_RESP_FUNC_COMPLETE;
+}
diff --git a/drivers/scsi/arcmsr/Makefile b/drivers/scsi/arcmsr/Makefile
new file mode 100644
index 0000000..721aced
--- /dev/null
+++ b/drivers/scsi/arcmsr/Makefile
@@ -0,0 +1,6 @@
+# File: drivers/arcmsr/Makefile
+# Makefile for the ARECA PCI-X PCI-EXPRESS SATA RAID controllers SCSI driver.
+
+arcmsr-objs := arcmsr_attr.o arcmsr_hba.o
+
+obj-$(CONFIG_SCSI_ARCMSR) := arcmsr.o
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
new file mode 100644
index 0000000..aff96db
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -0,0 +1,472 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr.h
+** BY : Erich Chen
+** Description: SCSI RAID Device Driver for
+** ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved.
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+*/
+#include <linux/interrupt.h>
+
+struct class_device_attribute;
+
+#define ARCMSR_MAX_OUTSTANDING_CMD 256
+#define ARCMSR_MAX_FREECCB_NUM 288
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.13"
+#define ARCMSR_SCSI_INITIATOR_ID 255
+#define ARCMSR_MAX_XFER_SECTORS 512
+#define ARCMSR_MAX_TARGETID 17
+#define ARCMSR_MAX_TARGETLUN 8
+#define ARCMSR_MAX_CMD_PERLUN ARCMSR_MAX_OUTSTANDING_CMD
+#define ARCMSR_MAX_QBUFFER 4096
+#define ARCMSR_MAX_SG_ENTRIES 38
+
+/*
+*******************************************************************************
+** split 64bits dma addressing
+*******************************************************************************
+*/
+#define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16)
+#define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff)
+/*
+*******************************************************************************
+** MESSAGE CONTROL CODE
+*******************************************************************************
+*/
+struct CMD_MESSAGE
+{
+ uint32_t HeaderLength;
+ uint8_t Signature[8];
+ uint32_t Timeout;
+ uint32_t ControlCode;
+ uint32_t ReturnCode;
+ uint32_t Length;
+};
+/*
+*******************************************************************************
+** IOP Message Transfer Data for user space
+*******************************************************************************
+*/
+struct CMD_MESSAGE_FIELD
+{
+ struct CMD_MESSAGE cmdmessage;
+ uint8_t messagedatabuffer[1032];
+};
+/* IOP message transfer */
+#define ARCMSR_MESSAGE_FAIL 0x0001
+/* DeviceType */
+#define ARECA_SATA_RAID 0x90000000
+/* FunctionCode */
+#define FUNCTION_READ_RQBUFFER 0x0801
+#define FUNCTION_WRITE_WQBUFFER 0x0802
+#define FUNCTION_CLEAR_RQBUFFER 0x0803
+#define FUNCTION_CLEAR_WQBUFFER 0x0804
+#define FUNCTION_CLEAR_ALLQBUFFER 0x0805
+#define FUNCTION_RETURN_CODE_3F 0x0806
+#define FUNCTION_SAY_HELLO 0x0807
+#define FUNCTION_SAY_GOODBYE 0x0808
+#define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809
+/* ARECA IO CONTROL CODE*/
+#define ARCMSR_MESSAGE_READ_RQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER
+#define ARCMSR_MESSAGE_WRITE_WQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_RQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_WQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER
+#define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER \
+ ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER
+#define ARCMSR_MESSAGE_RETURN_CODE_3F \
+ ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F
+#define ARCMSR_MESSAGE_SAY_HELLO \
+ ARECA_SATA_RAID | FUNCTION_SAY_HELLO
+#define ARCMSR_MESSAGE_SAY_GOODBYE \
+ ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE
+#define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \
+ ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE
+/* ARECA IOCTL ReturnCode */
+#define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001
+#define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006
+#define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F
+/*
+*************************************************************
+** structure for holding DMA address data
+*************************************************************
+*/
+#define IS_SG64_ADDR 0x01000000 /* bit24 */
+struct SG32ENTRY
+{
+ uint32_t length;
+ uint32_t address;
+};
+struct SG64ENTRY
+{
+ uint32_t length;
+ uint32_t address;
+ uint32_t addresshigh;
+};
+struct SGENTRY_UNION
+{
+ union
+ {
+ struct SG32ENTRY sg32entry;
+ struct SG64ENTRY sg64entry;
+ }u;
+};
+/*
+********************************************************************
+** Q Buffer of IOP Message Transfer
+********************************************************************
+*/
+struct QBUFFER
+{
+ uint32_t data_len;
+ uint8_t data[124];
+};
+/*
+*******************************************************************************
+** FIRMWARE INFO
+*******************************************************************************
+*/
+struct FIRMWARE_INFO
+{
+ uint32_t signature; /*0, 00-03*/
+ uint32_t request_len; /*1, 04-07*/
+ uint32_t numbers_queue; /*2, 08-11*/
+ uint32_t sdram_size; /*3, 12-15*/
+ uint32_t ide_channels; /*4, 16-19*/
+ char vendor[40]; /*5, 20-59*/
+ char model[8]; /*15, 60-67*/
+ char firmware_ver[16]; /*17, 68-83*/
+ char device_map[16]; /*21, 84-99*/
+};
+/* signature of set and get firmware config */
+#define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060
+#define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063
+/* message code of inbound message register */
+#define ARCMSR_INBOUND_MESG0_NOP 0x00000000
+#define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001
+#define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002
+#define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003
+#define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004
+#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005
+#define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006
+#define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007
+#define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008
+/* doorbell interrupt generator */
+#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001
+#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002
+#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001
+#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002
+/* ccb areca cdb flag */
+#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000
+#define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_ERROR 0x10000000
+/* outbound firmware ok */
+#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000
+/*
+*******************************************************************************
+** ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504)
+*******************************************************************************
+*/
+struct ARCMSR_CDB
+{
+ uint8_t Bus;
+ uint8_t TargetID;
+ uint8_t LUN;
+ uint8_t Function;
+
+ uint8_t CdbLength;
+ uint8_t sgcount;
+ uint8_t Flags;
+#define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01
+#define ARCMSR_CDB_FLAG_BIOS 0x02
+#define ARCMSR_CDB_FLAG_WRITE 0x04
+#define ARCMSR_CDB_FLAG_SIMPLEQ 0x00
+#define ARCMSR_CDB_FLAG_HEADQ 0x08
+#define ARCMSR_CDB_FLAG_ORDEREDQ 0x10
+ uint8_t Reserved1;
+
+ uint32_t Context;
+ uint32_t DataLength;
+
+ uint8_t Cdb[16];
+
+ uint8_t DeviceStatus;
+#define ARCMSR_DEV_CHECK_CONDITION 0x02
+#define ARCMSR_DEV_SELECT_TIMEOUT 0xF0
+#define ARCMSR_DEV_ABORTED 0xF1
+#define ARCMSR_DEV_INIT_FAIL 0xF2
+ uint8_t SenseData[15];
+
+ union
+ {
+ struct SG32ENTRY sg32entry[ARCMSR_MAX_SG_ENTRIES];
+ struct SG64ENTRY sg64entry[ARCMSR_MAX_SG_ENTRIES];
+ } u;
+};
+/*
+*******************************************************************************
+** Messaging Unit (MU) of the Intel R 80331 I/O processor (80331)
+*******************************************************************************
+*/
+struct MessageUnit
+{
+ uint32_t resrved0[4]; /*0000 000F*/
+ uint32_t inbound_msgaddr0; /*0010 0013*/
+ uint32_t inbound_msgaddr1; /*0014 0017*/
+ uint32_t outbound_msgaddr0; /*0018 001B*/
+ uint32_t outbound_msgaddr1; /*001C 001F*/
+ uint32_t inbound_doorbell; /*0020 0023*/
+ uint32_t inbound_intstatus; /*0024 0027*/
+ uint32_t inbound_intmask; /*0028 002B*/
+ uint32_t outbound_doorbell; /*002C 002F*/
+ uint32_t outbound_intstatus; /*0030 0033*/
+ uint32_t outbound_intmask; /*0034 0037*/
+ uint32_t reserved1[2]; /*0038 003F*/
+ uint32_t inbound_queueport; /*0040 0043*/
+ uint32_t outbound_queueport; /*0044 0047*/
+ uint32_t reserved2[2]; /*0048 004F*/
+ uint32_t reserved3[492]; /*0050 07FF 492*/
+ uint32_t reserved4[128]; /*0800 09FF 128*/
+ uint32_t message_rwbuffer[256]; /*0a00 0DFF 256*/
+ uint32_t message_wbuffer[32]; /*0E00 0E7F 32*/
+ uint32_t reserved5[32]; /*0E80 0EFF 32*/
+ uint32_t message_rbuffer[32]; /*0F00 0F7F 32*/
+ uint32_t reserved6[32]; /*0F80 0FFF 32*/
+};
+/*
+*******************************************************************************
+** Adapter Control Block
+*******************************************************************************
+*/
+struct AdapterControlBlock
+{
+ struct pci_dev * pdev;
+ struct Scsi_Host * host;
+ unsigned long vir2phy_offset;
+ /* Offset is used in making arc cdb physical to virtual calculations */
+ uint32_t outbound_int_enable;
+
+ struct MessageUnit __iomem * pmu;
+ /* message unit ATU inbound base address0 */
+
+ uint32_t acb_flags;
+#define ACB_F_SCSISTOPADAPTER 0x0001
+#define ACB_F_MSG_STOP_BGRB 0x0002
+ /* stop RAID background rebuild */
+#define ACB_F_MSG_START_BGRB 0x0004
+ /* stop RAID background rebuild */
+#define ACB_F_IOPDATA_OVERFLOW 0x0008
+ /* iop message data rqbuffer overflow */
+#define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010
+ /* message clear wqbuffer */
+#define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020
+ /* message clear rqbuffer */
+#define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
+#define ACB_F_BUS_RESET 0x0080
+#define ACB_F_IOP_INITED 0x0100
+ /* iop init */
+
+ struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
+ /* used for memory free */
+ struct list_head ccb_free_list;
+ /* head of free ccb list */
+ atomic_t ccboutstandingcount;
+
+ void * dma_coherent;
+ /* dma_coherent used for memory free */
+ dma_addr_t dma_coherent_handle;
+ /* dma_coherent_handle used for memory free */
+
+ uint8_t rqbuffer[ARCMSR_MAX_QBUFFER];
+ /* data collection buffer for read from 80331 */
+ int32_t rqbuf_firstindex;
+ /* first of read buffer */
+ int32_t rqbuf_lastindex;
+ /* last of read buffer */
+ uint8_t wqbuffer[ARCMSR_MAX_QBUFFER];
+ /* data collection buffer for write to 80331 */
+ int32_t wqbuf_firstindex;
+ /* first of write buffer */
+ int32_t wqbuf_lastindex;
+ /* last of write buffer */
+ uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
+ /* id0 ..... id15, lun0...lun7 */
+#define ARECA_RAID_GONE 0x55
+#define ARECA_RAID_GOOD 0xaa
+ uint32_t num_resets;
+ uint32_t num_aborts;
+ uint32_t firm_request_len;
+ uint32_t firm_numbers_queue;
+ uint32_t firm_sdram_size;
+ uint32_t firm_hd_channels;
+ char firm_model[12];
+ char firm_version[20];
+};/* HW_DEVICE_EXTENSION */
+/*
+*******************************************************************************
+** Command Control Block
+** this CCB length must be 32 bytes boundary
+*******************************************************************************
+*/
+struct CommandControlBlock
+{
+ struct ARCMSR_CDB arcmsr_cdb;
+ /*
+ ** 0-503 (size of CDB=504):
+ ** arcmsr messenger scsi command descriptor size 504 bytes
+ */
+ uint32_t cdb_shifted_phyaddr;
+ /* 504-507 */
+ uint32_t reserved1;
+ /* 508-511 */
+#if BITS_PER_LONG == 64
+ /* ======================512+64 bytes======================== */
+ struct list_head list;
+ /* 512-527 16 bytes next/prev ptrs for ccb lists */
+ struct scsi_cmnd * pcmd;
+ /* 528-535 8 bytes pointer of linux scsi command */
+ struct AdapterControlBlock * acb;
+ /* 536-543 8 bytes pointer of acb */
+
+ uint16_t ccb_flags;
+ /* 544-545 */
+ #define CCB_FLAG_READ 0x0000
+ #define CCB_FLAG_WRITE 0x0001
+ #define CCB_FLAG_ERROR 0x0002
+ #define CCB_FLAG_FLUSHCACHE 0x0004
+ #define CCB_FLAG_MASTER_ABORTED 0x0008
+ uint16_t startdone;
+ /* 546-547 */
+ #define ARCMSR_CCB_DONE 0x0000
+ #define ARCMSR_CCB_START 0x55AA
+ #define ARCMSR_CCB_ABORTED 0xAA55
+ #define ARCMSR_CCB_ILLEGAL 0xFFFF
+ uint32_t reserved2[7];
+ /* 548-551 552-555 556-559 560-563 564-567 568-571 572-575 */
+#else
+ /* ======================512+32 bytes======================== */
+ struct list_head list;
+ /* 512-519 8 bytes next/prev ptrs for ccb lists */
+ struct scsi_cmnd * pcmd;
+ /* 520-523 4 bytes pointer of linux scsi command */
+ struct AdapterControlBlock * acb;
+ /* 524-527 4 bytes pointer of acb */
+
+ uint16_t ccb_flags;
+ /* 528-529 */
+ #define CCB_FLAG_READ 0x0000
+ #define CCB_FLAG_WRITE 0x0001
+ #define CCB_FLAG_ERROR 0x0002
+ #define CCB_FLAG_FLUSHCACHE 0x0004
+ #define CCB_FLAG_MASTER_ABORTED 0x0008
+ uint16_t startdone;
+ /* 530-531 */
+ #define ARCMSR_CCB_DONE 0x0000
+ #define ARCMSR_CCB_START 0x55AA
+ #define ARCMSR_CCB_ABORTED 0xAA55
+ #define ARCMSR_CCB_ILLEGAL 0xFFFF
+ uint32_t reserved2[3];
+ /* 532-535 536-539 540-543 */
+#endif
+ /* ========================================================== */
+};
+/*
+*******************************************************************************
+** ARECA SCSI sense data
+*******************************************************************************
+*/
+struct SENSE_DATA
+{
+ uint8_t ErrorCode:7;
+#define SCSI_SENSE_CURRENT_ERRORS 0x70
+#define SCSI_SENSE_DEFERRED_ERRORS 0x71
+ uint8_t Valid:1;
+ uint8_t SegmentNumber;
+ uint8_t SenseKey:4;
+ uint8_t Reserved:1;
+ uint8_t IncorrectLength:1;
+ uint8_t EndOfMedia:1;
+ uint8_t FileMark:1;
+ uint8_t Information[4];
+ uint8_t AdditionalSenseLength;
+ uint8_t CommandSpecificInformation[4];
+ uint8_t AdditionalSenseCode;
+ uint8_t AdditionalSenseCodeQualifier;
+ uint8_t FieldReplaceableUnitCode;
+ uint8_t SenseKeySpecific[3];
+};
+/*
+*******************************************************************************
+** Outbound Interrupt Status Register - OISR
+*******************************************************************************
+*/
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
+#define ARCMSR_MU_OUTBOUND_PCI_INT 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01
+#define ARCMSR_MU_OUTBOUND_HANDLE_INT \
+ (ARCMSR_MU_OUTBOUND_MESSAGE0_INT \
+ |ARCMSR_MU_OUTBOUND_MESSAGE1_INT \
+ |ARCMSR_MU_OUTBOUND_DOORBELL_INT \
+ |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT \
+ |ARCMSR_MU_OUTBOUND_PCI_INT)
+/*
+*******************************************************************************
+** Outbound Interrupt Mask Register - OIMR
+*******************************************************************************
+*/
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34
+#define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01
+#define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F
+
+extern void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb);
+extern struct class_device_attribute *arcmsr_host_attrs[];
+extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb);
+void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);
+
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
new file mode 100644
index 0000000..12497da
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -0,0 +1,381 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr_attr.c
+** BY : Erich Chen
+** Description: attributes exported to sysfs and device host
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
+** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+*******************************************************************************
+*/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include "arcmsr.h"
+
+struct class_device_attribute *arcmsr_host_attrs[];
+
+static ssize_t
+arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint8_t *pQbuffer,*ptmpQbuffer;
+ int32_t allxfer_len = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ /* do message unit read. */
+ ptmpQbuffer = (uint8_t *)buf;
+ while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
+ && (allxfer_len < 1031)) {
+ pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex];
+ memcpy(ptmpQbuffer, pQbuffer, 1);
+ acb->rqbuf_firstindex++;
+ acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ ptmpQbuffer++;
+ allxfer_len++;
+ }
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *)
+ ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t iop_len;
+
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ iop_len = readl(&prbuffer->data_len);
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ return (allxfer_len);
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
+ uint8_t *pQbuffer, *ptmpuserbuffer;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (count > 1032)
+ return -EINVAL;
+ /* do message unit write. */
+ ptmpuserbuffer = (uint8_t *)buf;
+ user_len = (int32_t)count;
+ wqbuf_lastindex = acb->wqbuf_lastindex;
+ wqbuf_firstindex = acb->wqbuf_firstindex;
+ if (wqbuf_lastindex != wqbuf_firstindex) {
+ arcmsr_post_Qbuffer(acb);
+ return 0; /*need retry*/
+ } else {
+ my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= user_len) {
+ while (user_len > 0) {
+ pQbuffer =
+ &acb->wqbuffer[acb->wqbuf_lastindex];
+ memcpy(pQbuffer, ptmpuserbuffer, 1);
+ acb->wqbuf_lastindex++;
+ acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ ptmpuserbuffer++;
+ user_len--;
+ }
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) {
+ acb->acb_flags &=
+ ~ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ arcmsr_post_Qbuffer(acb);
+ }
+ return count;
+ } else {
+ return 0; /*need retry*/
+ }
+ }
+}
+
+static ssize_t
+arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct class_device *cdev = container_of(kobj,struct class_device,kobj);
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint8_t *pQbuffer;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED
+ | ACB_F_MESSAGE_RQBUFFER_CLEARED
+ | ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ pQbuffer = acb->rqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pQbuffer = acb->wqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ return 1;
+}
+
+static struct bin_attribute arcmsr_sysfs_message_read_attr = {
+ .attr = {
+ .name = "mu_read",
+ .mode = S_IRUSR ,
+ .owner = THIS_MODULE,
+ },
+ .size = 1032,
+ .read = arcmsr_sysfs_iop_message_read,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_write_attr = {
+ .attr = {
+ .name = "mu_write",
+ .mode = S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = 1032,
+ .write = arcmsr_sysfs_iop_message_write,
+};
+
+static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
+ .attr = {
+ .name = "mu_clear",
+ .mode = S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = 1,
+ .write = arcmsr_sysfs_iop_message_clear,
+};
+
+int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb)
+{
+ struct Scsi_Host *host = acb->host;
+ int error;
+
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n");
+ goto error_bin_file_message_read;
+ }
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n");
+ goto error_bin_file_message_write;
+ }
+ error = sysfs_create_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_clear_attr);
+ if (error) {
+ printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n");
+ goto error_bin_file_message_clear;
+ }
+ return 0;
+error_bin_file_message_clear:
+ sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+error_bin_file_message_write:
+ sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+error_bin_file_message_read:
+ return error;
+}
+
+void
+arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb) {
+ struct Scsi_Host *host = acb->host;
+
+ sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_clear_attr);
+ sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_write_attr);
+ sysfs_remove_bin_file(&host->shost_classdev.kobj,
+ &arcmsr_sysfs_message_read_attr);
+}
+
+
+static ssize_t
+arcmsr_attr_host_driver_version(struct class_device *cdev, char *buf) {
+ return snprintf(buf, PAGE_SIZE,
+ "%s\n",
+ ARCMSR_DRIVER_VERSION);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_posted_cmd(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ atomic_read(&acb->ccboutstandingcount));
+}
+
+static ssize_t
+arcmsr_attr_host_driver_reset(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->num_resets);
+}
+
+static ssize_t
+arcmsr_attr_host_driver_abort(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->num_aborts);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_model(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+ return snprintf(buf, PAGE_SIZE,
+ "%s\n",
+ acb->firm_model);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_version(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%s\n",
+ acb->firm_version);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_request_len(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->firm_request_len);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_numbers_queue(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->firm_numbers_queue);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_sdram_size(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->firm_sdram_size);
+}
+
+static ssize_t
+arcmsr_attr_host_fw_hd_channels(struct class_device *cdev, char *buf) {
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%4d\n",
+ acb->firm_hd_channels);
+}
+
+static CLASS_DEVICE_ATTR(host_driver_version, S_IRUGO, arcmsr_attr_host_driver_version, NULL);
+static CLASS_DEVICE_ATTR(host_driver_posted_cmd, S_IRUGO, arcmsr_attr_host_driver_posted_cmd, NULL);
+static CLASS_DEVICE_ATTR(host_driver_reset, S_IRUGO, arcmsr_attr_host_driver_reset, NULL);
+static CLASS_DEVICE_ATTR(host_driver_abort, S_IRUGO, arcmsr_attr_host_driver_abort, NULL);
+static CLASS_DEVICE_ATTR(host_fw_model, S_IRUGO, arcmsr_attr_host_fw_model, NULL);
+static CLASS_DEVICE_ATTR(host_fw_version, S_IRUGO, arcmsr_attr_host_fw_version, NULL);
+static CLASS_DEVICE_ATTR(host_fw_request_len, S_IRUGO, arcmsr_attr_host_fw_request_len, NULL);
+static CLASS_DEVICE_ATTR(host_fw_numbers_queue, S_IRUGO, arcmsr_attr_host_fw_numbers_queue, NULL);
+static CLASS_DEVICE_ATTR(host_fw_sdram_size, S_IRUGO, arcmsr_attr_host_fw_sdram_size, NULL);
+static CLASS_DEVICE_ATTR(host_fw_hd_channels, S_IRUGO, arcmsr_attr_host_fw_hd_channels, NULL);
+
+struct class_device_attribute *arcmsr_host_attrs[] = {
+ &class_device_attr_host_driver_version,
+ &class_device_attr_host_driver_posted_cmd,
+ &class_device_attr_host_driver_reset,
+ &class_device_attr_host_driver_abort,
+ &class_device_attr_host_fw_model,
+ &class_device_attr_host_fw_version,
+ &class_device_attr_host_fw_request_len,
+ &class_device_attr_host_fw_numbers_queue,
+ &class_device_attr_host_fw_sdram_size,
+ &class_device_attr_host_fw_hd_channels,
+ NULL,
+};
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
new file mode 100644
index 0000000..475f978
--- /dev/null
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -0,0 +1,1496 @@
+/*
+*******************************************************************************
+** O.S : Linux
+** FILE NAME : arcmsr_hba.c
+** BY : Erich Chen
+** Description: SCSI RAID Device Driver for
+** ARECA RAID Host adapter
+*******************************************************************************
+** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
+**
+** Web site: www.areca.com.tw
+** E-mail: erich@areca.com.tw
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License version 2 as
+** published by the Free Software Foundation.
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*******************************************************************************
+** Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions
+** are met:
+** 1. Redistributions of source code must retain the above copyright
+** notice, this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright
+** notice, this list of conditions and the following disclaimer in the
+** documentation and/or other materials provided with the distribution.
+** 3. The name of the author may not be used to endorse or promote products
+** derived from this software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT
+** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF
+** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************
+** For history of changes, see Documentation/scsi/ChangeLog.arcmsr
+** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt
+*******************************************************************************
+*/
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/spinlock.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsicam.h>
+#include "arcmsr.h"
+
+MODULE_AUTHOR("Erich Chen <erich@areca.com.tw>");
+MODULE_DESCRIPTION("ARECA (ARC11xx/12xx) SATA RAID HOST Adapter");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(ARCMSR_DRIVER_VERSION);
+
+static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd);
+static int arcmsr_abort(struct scsi_cmnd *);
+static int arcmsr_bus_reset(struct scsi_cmnd *);
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int *info);
+static int arcmsr_queue_command(struct scsi_cmnd * cmd,
+ void (*done) (struct scsi_cmnd *));
+static int arcmsr_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void arcmsr_remove(struct pci_dev *pdev);
+static void arcmsr_shutdown(struct pci_dev *pdev);
+static void arcmsr_iop_init(struct AdapterControlBlock *acb);
+static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb);
+static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb);
+static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb);
+static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb);
+static const char *arcmsr_info(struct Scsi_Host *);
+static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
+
+static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
+{
+ if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
+ queue_depth = ARCMSR_MAX_CMD_PERLUN;
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
+ return queue_depth;
+}
+
+static struct scsi_host_template arcmsr_scsi_host_template = {
+ .module = THIS_MODULE,
+ .name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION,
+ .info = arcmsr_info,
+ .queuecommand = arcmsr_queue_command,
+ .eh_abort_handler = arcmsr_abort,
+ .eh_bus_reset_handler = arcmsr_bus_reset,
+ .bios_param = arcmsr_bios_param,
+ .change_queue_depth = arcmsr_adjust_disk_queue_depth,
+ .can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
+ .this_id = ARCMSR_SCSI_INITIATOR_ID,
+ .sg_tablesize = ARCMSR_MAX_SG_ENTRIES,
+ .max_sectors = ARCMSR_MAX_XFER_SECTORS,
+ .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = arcmsr_host_attrs,
+};
+
+static struct pci_device_id arcmsr_device_id_table[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1120)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1130)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1160)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1170)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1220)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1230)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1260)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1270)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1280)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1380)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1381)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1680)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1681)},
+ {0, 0}, /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, arcmsr_device_id_table);
+static struct pci_driver arcmsr_pci_driver = {
+ .name = "arcmsr",
+ .id_table = arcmsr_device_id_table,
+ .probe = arcmsr_probe,
+ .remove = arcmsr_remove,
+ .shutdown = arcmsr_shutdown
+};
+
+static irqreturn_t arcmsr_do_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ irqreturn_t handle_state;
+ struct AdapterControlBlock *acb;
+ unsigned long flags;
+
+ acb = (struct AdapterControlBlock *)dev_id;
+
+ spin_lock_irqsave(acb->host->host_lock, flags);
+ handle_state = arcmsr_interrupt(acb);
+ spin_unlock_irqrestore(acb->host->host_lock, flags);
+ return handle_state;
+}
+
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int *geom)
+{
+ int ret, heads, sectors, cylinders, total_capacity;
+ unsigned char *buffer;/* return copy of block device's partition table */
+
+ buffer = scsi_bios_ptable(bdev);
+ if (buffer) {
+ ret = scsi_partsize(buffer, capacity, &geom[2], &geom[0], &geom[1]);
+ kfree(buffer);
+ if (ret != -1)
+ return ret;
+ }
+ total_capacity = capacity;
+ heads = 64;
+ sectors = 32;
+ cylinders = total_capacity / (heads * sectors);
+ if (cylinders > 1024) {
+ heads = 255;
+ sectors = 63;
+ cylinders = total_capacity / (heads * sectors);
+ }
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+ return 0;
+}
+
+static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
+{
+ struct pci_dev *pdev = acb->pdev;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 ccb_phyaddr_hi32;
+ void *dma_coherent;
+ dma_addr_t dma_coherent_handle, dma_addr;
+ struct CommandControlBlock *ccb_tmp;
+ int i, j;
+
+ dma_coherent = dma_alloc_coherent(&pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM *
+ sizeof (struct CommandControlBlock) + 0x20,
+ &dma_coherent_handle, GFP_KERNEL);
+ if (!dma_coherent)
+ return -ENOMEM;
+
+ acb->dma_coherent = dma_coherent;
+ acb->dma_coherent_handle = dma_coherent_handle;
+
+ if (((unsigned long)dma_coherent & 0x1F)) {
+ dma_coherent = dma_coherent +
+ (0x20 - ((unsigned long)dma_coherent & 0x1F));
+ dma_coherent_handle = dma_coherent_handle +
+ (0x20 - ((unsigned long)dma_coherent_handle & 0x1F));
+ }
+
+ dma_addr = dma_coherent_handle;
+ ccb_tmp = (struct CommandControlBlock *)dma_coherent;
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ ccb_tmp->cdb_shifted_phyaddr = dma_addr >> 5;
+ ccb_tmp->acb = acb;
+ acb->pccb_pool[i] = ccb_tmp;
+ list_add_tail(&ccb_tmp->list, &acb->ccb_free_list);
+ dma_addr = dma_addr + sizeof (struct CommandControlBlock);
+ ccb_tmp++;
+ }
+
+ acb->vir2phy_offset = (unsigned long)ccb_tmp -
+ (unsigned long)dma_addr;
+ for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
+ for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
+ acb->devstate[i][j] = ARECA_RAID_GOOD;
+
+ /*
+ ** here we need to tell iop 331 our ccb_tmp.HighPart
+ ** if ccb_tmp.HighPart is not zero
+ */
+ ccb_phyaddr_hi32 = (uint32_t) ((dma_coherent_handle >> 16) >> 16);
+ if (ccb_phyaddr_hi32 != 0) {
+ writel(ARCMSR_SIGNATURE_SET_CONFIG, ®->message_rwbuffer[0]);
+ writel(ccb_phyaddr_hi32, ®->message_rwbuffer[1]);
+ writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE "arcmsr%d: "
+ "'set ccb high part physical address' timeout\n",
+ acb->host->host_no);
+ }
+
+ writel(readl(®->outbound_intmask) |
+ ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ return 0;
+}
+
+static int arcmsr_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct Scsi_Host *host;
+ struct AdapterControlBlock *acb;
+ uint8_t bus, dev_fun;
+ int error;
+
+ error = pci_enable_device(pdev);
+ if (error)
+ goto out;
+ pci_set_master(pdev);
+
+ host = scsi_host_alloc(&arcmsr_scsi_host_template,
+ sizeof(struct AdapterControlBlock));
+ if (!host) {
+ error = -ENOMEM;
+ goto out_disable_device;
+ }
+ acb = (struct AdapterControlBlock *)host->hostdata;
+ memset(acb, 0, sizeof (struct AdapterControlBlock));
+
+ error = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (error) {
+ error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (error) {
+ printk(KERN_WARNING
+ "scsi%d: No suitable DMA mask available\n",
+ host->host_no);
+ goto out_host_put;
+ }
+ }
+ bus = pdev->bus->number;
+ dev_fun = pdev->devfn;
+ acb->host = host;
+ acb->pdev = pdev;
+ host->max_sectors = ARCMSR_MAX_XFER_SECTORS;
+ host->max_lun = ARCMSR_MAX_TARGETLUN;
+ host->max_id = ARCMSR_MAX_TARGETID;/*16:8*/
+ host->max_cmd_len = 16; /*this is issue of 64bit LBA, over 2T byte*/
+ host->sg_tablesize = ARCMSR_MAX_SG_ENTRIES;
+ host->can_queue = ARCMSR_MAX_FREECCB_NUM; /* max simultaneous cmds */
+ host->cmd_per_lun = ARCMSR_MAX_CMD_PERLUN;
+ host->this_id = ARCMSR_SCSI_INITIATOR_ID;
+ host->unique_id = (bus << 8) | dev_fun;
+ host->irq = pdev->irq;
+ error = pci_request_regions(pdev, "arcmsr");
+ if (error)
+ goto out_host_put;
+
+ acb->pmu = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!acb->pmu) {
+ printk(KERN_NOTICE "arcmsr%d: memory"
+ " mapping region fail \n", acb->host->host_no);
+ goto out_release_regions;
+ }
+ acb->acb_flags |= (ACB_F_MESSAGE_WQBUFFER_CLEARED |
+ ACB_F_MESSAGE_RQBUFFER_CLEARED |
+ ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->acb_flags &= ~ACB_F_SCSISTOPADAPTER;
+ INIT_LIST_HEAD(&acb->ccb_free_list);
+
+ error = arcmsr_alloc_ccb_pool(acb);
+ if (error)
+ goto out_iounmap;
+
+ error = request_irq(pdev->irq, arcmsr_do_interrupt,
+ SA_INTERRUPT | SA_SHIRQ, "arcmsr", acb);
+ if (error)
+ goto out_free_ccb_pool;
+
+ arcmsr_iop_init(acb);
+ pci_set_drvdata(pdev, host);
+
+ error = scsi_add_host(host, &pdev->dev);
+ if (error)
+ goto out_free_irq;
+
+ error = arcmsr_alloc_sysfs_attr(acb);
+ if (error)
+ goto out_free_sysfs;
+
+ scsi_scan_host(host);
+ return 0;
+ out_free_sysfs:
+ out_free_irq:
+ free_irq(pdev->irq, acb);
+ out_free_ccb_pool:
+ arcmsr_free_ccb_pool(acb);
+ out_iounmap:
+ iounmap(acb->pmu);
+ out_release_regions:
+ pci_release_regions(pdev);
+ out_host_put:
+ scsi_host_put(host);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void arcmsr_abort_allcmd(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+
+ writel(ARCMSR_INBOUND_MESG0_ABORT_CMD, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'abort all outstanding command' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_pci_unmap_dma(struct CommandControlBlock *ccb)
+{
+ struct AdapterControlBlock *acb = ccb->acb;
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+
+ if (pcmd->use_sg != 0) {
+ struct scatterlist *sl;
+
+ sl = (struct scatterlist *)pcmd->request_buffer;
+ pci_unmap_sg(acb->pdev, sl, pcmd->use_sg, pcmd->sc_data_direction);
+ }
+ else if (pcmd->request_bufflen != 0)
+ pci_unmap_single(acb->pdev,
+ pcmd->SCp.dma_handle,
+ pcmd->request_bufflen, pcmd->sc_data_direction);
+}
+
+static void arcmsr_ccb_complete(struct CommandControlBlock *ccb, int stand_flag)
+{
+ struct AdapterControlBlock *acb = ccb->acb;
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+
+ arcmsr_pci_unmap_dma(ccb);
+ if (stand_flag == 1)
+ atomic_dec(&acb->ccboutstandingcount);
+ ccb->startdone = ARCMSR_CCB_DONE;
+ ccb->ccb_flags = 0;
+ list_add_tail(&ccb->list, &acb->ccb_free_list);
+ pcmd->scsi_done(pcmd);
+}
+
+static void arcmsr_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ struct MessageUnit __iomem *reg = acb->pmu;
+ int poll_count = 0;
+
+ arcmsr_free_sysfs_attr(acb);
+ scsi_remove_host(host);
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+ writel(readl(®->outbound_intmask) |
+ ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ acb->acb_flags |= ACB_F_SCSISTOPADAPTER;
+ acb->acb_flags &= ~ACB_F_IOP_INITED;
+
+ for (poll_count = 0; poll_count < 256; poll_count++) {
+ if (!atomic_read(&acb->ccboutstandingcount))
+ break;
+ arcmsr_interrupt(acb);
+ msleep(25);
+ }
+
+ if (atomic_read(&acb->ccboutstandingcount)) {
+ int i;
+
+ arcmsr_abort_allcmd(acb);
+ for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++)
+ readl(®->outbound_queueport);
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ struct CommandControlBlock *ccb = acb->pccb_pool[i];
+ if (ccb->startdone == ARCMSR_CCB_START) {
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ }
+ }
+
+ free_irq(pdev->irq, acb);
+ iounmap(acb->pmu);
+ arcmsr_free_ccb_pool(acb);
+ pci_release_regions(pdev);
+
+ scsi_host_put(host);
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void arcmsr_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)host->hostdata;
+
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+}
+
+static int arcmsr_module_init(void)
+{
+ int error = 0;
+
+ error = pci_register_driver(&arcmsr_pci_driver);
+ return error;
+}
+
+static void arcmsr_module_exit(void)
+{
+ pci_unregister_driver(&arcmsr_pci_driver);
+}
+module_init(arcmsr_module_init);
+module_exit(arcmsr_module_exit);
+
+static u32 arcmsr_disable_outbound_ints(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 orig_mask = readl(®->outbound_intmask);
+
+ writel(orig_mask | ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE,
+ ®->outbound_intmask);
+ return orig_mask;
+}
+
+static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb,
+ u32 orig_mask)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ u32 mask;
+
+ mask = orig_mask & ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE |
+ ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
+ writel(mask, ®->outbound_intmask);
+}
+
+static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg=acb->pmu;
+
+ writel(ARCMSR_INBOUND_MESG0_FLUSH_CACHE, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'flush adapter cache' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_report_sense_info(struct CommandControlBlock *ccb)
+{
+ struct scsi_cmnd *pcmd = ccb->pcmd;
+ struct SENSE_DATA *sensebuffer = (struct SENSE_DATA *)pcmd->sense_buffer;
+
+ pcmd->result = DID_OK << 16;
+ if (sensebuffer) {
+ int sense_data_length =
+ sizeof (struct SENSE_DATA) < sizeof (pcmd->sense_buffer)
+ ? sizeof (struct SENSE_DATA) : sizeof (pcmd->sense_buffer);
+ memset(sensebuffer, 0, sizeof (pcmd->sense_buffer));
+ memcpy(sensebuffer, ccb->arcmsr_cdb.SenseData, sense_data_length);
+ sensebuffer->ErrorCode = SCSI_SENSE_CURRENT_ERRORS;
+ sensebuffer->Valid = 1;
+ }
+}
+
+static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t Index;
+ uint8_t Retries = 0x00;
+
+ do {
+ for (Index = 0; Index < 100; Index++) {
+ if (readl(®->outbound_intstatus)
+ & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
+ writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT
+ , ®->outbound_intstatus);
+ return 0x00;
+ }
+ msleep_interruptible(10);
+ }/*max 1 seconds*/
+ } while (Retries++ < 20);/*max 20 sec*/
+ return 0xff;
+}
+
+static void arcmsr_build_ccb(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *ccb, struct scsi_cmnd *pcmd)
+{
+ struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
+ int8_t *psge = (int8_t *)&arcmsr_cdb->u;
+ uint32_t address_lo, address_hi;
+ int arccdbsize = 0x30;
+
+ ccb->pcmd = pcmd;
+ memset(arcmsr_cdb, 0, sizeof (struct ARCMSR_CDB));
+ arcmsr_cdb->Bus = 0;
+ arcmsr_cdb->TargetID = pcmd->device->id;
+ arcmsr_cdb->LUN = pcmd->device->lun;
+ arcmsr_cdb->Function = 1;
+ arcmsr_cdb->CdbLength = (uint8_t)pcmd->cmd_len;
+ arcmsr_cdb->Context = (unsigned long)arcmsr_cdb;
+ memcpy(arcmsr_cdb->Cdb, pcmd->cmnd, pcmd->cmd_len);
+ if (pcmd->use_sg) {
+ int length, sgcount, i, cdb_sgcount = 0;
+ struct scatterlist *sl;
+
+ /* Get Scatter Gather List from scsiport. */
+ sl = (struct scatterlist *) pcmd->request_buffer;
+ sgcount = pci_map_sg(acb->pdev, sl, pcmd->use_sg,
+ pcmd->sc_data_direction);
+ /* map stor port SG list to our iop SG List. */
+ for (i = 0; i < sgcount; i++) {
+ /* Get the physical address of the current data pointer */
+ length = cpu_to_le32(sg_dma_len(sl));
+ address_lo = cpu_to_le32(dma_addr_lo32(sg_dma_address(sl)));
+ address_hi = cpu_to_le32(dma_addr_hi32(sg_dma_address(sl)));
+ if (address_hi == 0) {
+ struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge;
+
+ pdma_sg->address = address_lo;
+ pdma_sg->length = length;
+ psge += sizeof (struct SG32ENTRY);
+ arccdbsize += sizeof (struct SG32ENTRY);
+ } else {
+ struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge;
+
+ pdma_sg->addresshigh = address_hi;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = length|IS_SG64_ADDR;
+ psge += sizeof (struct SG64ENTRY);
+ arccdbsize += sizeof (struct SG64ENTRY);
+ }
+ sl++;
+ cdb_sgcount++;
+ }
+ arcmsr_cdb->sgcount = (uint8_t)cdb_sgcount;
+ arcmsr_cdb->DataLength = pcmd->request_bufflen;
+ if ( arccdbsize > 256)
+ arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_SGL_BSIZE;
+ } else if (pcmd->request_bufflen) {
+ dma_addr_t dma_addr;
+ dma_addr = pci_map_single(acb->pdev, pcmd->request_buffer,
+ pcmd->request_bufflen, pcmd->sc_data_direction);
+ pcmd->SCp.dma_handle = dma_addr;
+ address_lo = cpu_to_le32(dma_addr_lo32(dma_addr));
+ address_hi = cpu_to_le32(dma_addr_hi32(dma_addr));
+ if (address_hi == 0) {
+ struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = pcmd->request_bufflen;
+ } else {
+ struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge;
+ pdma_sg->addresshigh = address_hi;
+ pdma_sg->address = address_lo;
+ pdma_sg->length = pcmd->request_bufflen|IS_SG64_ADDR;
+ }
+ arcmsr_cdb->sgcount = 1;
+ arcmsr_cdb->DataLength = pcmd->request_bufflen;
+ }
+ if (pcmd->sc_data_direction == DMA_TO_DEVICE ) {
+ arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE;
+ ccb->ccb_flags |= CCB_FLAG_WRITE;
+ }
+}
+
+static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t cdb_shifted_phyaddr = ccb->cdb_shifted_phyaddr;
+ struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
+
+ atomic_inc(&acb->ccboutstandingcount);
+ ccb->startdone = ARCMSR_CCB_START;
+ if (arcmsr_cdb->Flags & ARCMSR_CDB_FLAG_SGL_BSIZE)
+ writel(cdb_shifted_phyaddr | ARCMSR_CCBPOST_FLAG_SGL_BSIZE,
+ ®->inbound_queueport);
+ else
+ writel(cdb_shifted_phyaddr, ®->inbound_queueport);
+}
+
+void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct QBUFFER __iomem *pwbuffer = (struct QBUFFER __iomem *) ®->message_wbuffer;
+ uint8_t __iomem *iop_data = (uint8_t __iomem *) pwbuffer->data;
+ int32_t allxfer_len = 0;
+
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_READED) {
+ acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED);
+ while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex)
+ && (allxfer_len < 124)) {
+ writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data);
+ acb->wqbuf_firstindex++;
+ acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ allxfer_len++;
+ }
+ writel(allxfer_len, &pwbuffer->data_len);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK
+ , ®->inbound_doorbell);
+ }
+}
+
+static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+
+ acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
+ writel(ARCMSR_INBOUND_MESG0_STOP_BGRB, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait 'stop adapter background rebulid' timeout \n"
+ , acb->host->host_no);
+}
+
+static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb)
+{
+ dma_free_coherent(&acb->pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20,
+ acb->dma_coherent,
+ acb->dma_coherent_handle);
+}
+
+static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t flag_ccb, outbound_intstatus, outbound_doorbell;
+
+ outbound_intstatus = readl(®->outbound_intstatus)
+ & acb->outbound_int_enable;
+ writel(outbound_intstatus, ®->outbound_intstatus);
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT) {
+ outbound_doorbell = readl(®->outbound_doorbell);
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK) {
+ struct QBUFFER __iomem * prbuffer =
+ (struct QBUFFER __iomem *) ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t my_empty_len, iop_len, rqbuf_firstindex, rqbuf_lastindex;
+
+ rqbuf_lastindex = acb->rqbuf_lastindex;
+ rqbuf_firstindex = acb->rqbuf_firstindex;
+ iop_len = readl(&prbuffer->data_len);
+ my_empty_len = (rqbuf_firstindex - rqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= iop_len) {
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ } else
+ acb->acb_flags |= ACB_F_IOPDATA_OVERFLOW;
+ }
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK) {
+ acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_READED;
+ if (acb->wqbuf_firstindex != acb->wqbuf_lastindex) {
+ struct QBUFFER __iomem * pwbuffer =
+ (struct QBUFFER __iomem *) ®->message_wbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *) pwbuffer->data;
+ int32_t allxfer_len = 0;
+
+ acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED);
+ while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex)
+ && (allxfer_len < 124)) {
+ writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data);
+ acb->wqbuf_firstindex++;
+ acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ allxfer_len++;
+ }
+ writel(allxfer_len, &pwbuffer->data_len);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK,
+ ®->inbound_doorbell);
+ }
+ if (acb->wqbuf_firstindex == acb->wqbuf_lastindex)
+ acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ }
+ }
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) {
+ int id, lun;
+ /*
+ ****************************************************************
+ ** areca cdb command done
+ ****************************************************************
+ */
+ while (1) {
+ if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF)
+ break;/*chip FIFO no ccb for completion already*/
+ /* check if command done with no error*/
+ ccb = (struct CommandControlBlock *)(acb->vir2phy_offset +
+ (flag_ccb << 5));
+ if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
+ if (ccb->startdone == ARCMSR_CCB_ABORTED) {
+ struct scsi_cmnd *abortcmd=ccb->pcmd;
+ if (abortcmd) {
+ abortcmd->result |= DID_ABORT >> 16;
+ arcmsr_ccb_complete(ccb, 1);
+ printk(KERN_NOTICE
+ "arcmsr%d: ccb='0x%p' isr got aborted command \n"
+ , acb->host->host_no, ccb);
+ }
+ continue;
+ }
+ printk(KERN_NOTICE
+ "arcmsr%d: isr get an illegal ccb command done acb='0x%p'"
+ "ccb='0x%p' ccbacb='0x%p' startdone = 0x%x"
+ " ccboutstandingcount=%d \n"
+ , acb->host->host_no
+ , acb
+ , ccb
+ , ccb->acb
+ , ccb->startdone
+ , atomic_read(&acb->ccboutstandingcount));
+ continue;
+ }
+ id = ccb->pcmd->device->id;
+ lun = ccb->pcmd->device->lun;
+ if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) {
+ if (acb->devstate[id][lun] == ARECA_RAID_GONE)
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ ccb->pcmd->result = DID_OK << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ } else {
+ switch(ccb->arcmsr_cdb.DeviceStatus) {
+ case ARCMSR_DEV_SELECT_TIMEOUT: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_TIME_OUT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_ABORTED:
+ case ARCMSR_DEV_INIT_FAIL: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_CHECK_CONDITION: {
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ arcmsr_report_sense_info(ccb);
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ default:
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d"
+ " isr get command error done,"
+ "but got unknown DeviceStatus = 0x%x \n"
+ , acb->host->host_no
+ , id
+ , lun
+ , ccb->arcmsr_cdb.DeviceStatus);
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_NO_CONNECT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ break;
+ }
+ }
+ }/*drain reply FIFO*/
+ }
+ if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT))
+ return IRQ_NONE;
+ return IRQ_HANDLED;
+}
+
+static void arcmsr_iop_parking(struct AdapterControlBlock *acb)
+{
+ if (acb) {
+ /* stop adapter background rebuild */
+ if (acb->acb_flags & ACB_F_MSG_START_BGRB) {
+ acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
+ arcmsr_stop_adapter_bgrb(acb);
+ arcmsr_flush_adapter_cache(acb);
+ }
+ }
+}
+
+static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CMD_MESSAGE_FIELD *pcmdmessagefld;
+ int retvalue = 0, transfer_len = 0;
+ char *buffer;
+ uint32_t controlcode = (uint32_t ) cmd->cmnd[5] << 24 |
+ (uint32_t ) cmd->cmnd[6] << 16 |
+ (uint32_t ) cmd->cmnd[7] << 8 |
+ (uint32_t ) cmd->cmnd[8];
+ /* 4 bytes: Areca io control code */
+ if (cmd->use_sg) {
+ struct scatterlist *sg = (struct scatterlist *)cmd->request_buffer;
+
+ buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ if (cmd->use_sg > 1) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ transfer_len += sg->length;
+ } else {
+ buffer = cmd->request_buffer;
+ transfer_len = cmd->request_bufflen;
+ }
+ if (transfer_len > sizeof(struct CMD_MESSAGE_FIELD)) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ pcmdmessagefld = (struct CMD_MESSAGE_FIELD *) buffer;
+ switch(controlcode) {
+ case ARCMSR_MESSAGE_READ_RQBUFFER: {
+ unsigned long *ver_addr;
+ dma_addr_t buf_handle;
+ uint8_t *pQbuffer, *ptmpQbuffer;
+ int32_t allxfer_len = 0;
+
+ ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
+ if (!ver_addr) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ ptmpQbuffer = (uint8_t *) ver_addr;
+ while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex)
+ && (allxfer_len < 1031)) {
+ pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex];
+ memcpy(ptmpQbuffer, pQbuffer, 1);
+ acb->rqbuf_firstindex++;
+ acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER;
+ ptmpQbuffer++;
+ allxfer_len++;
+ }
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *)
+ ®->message_rbuffer;
+ uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data;
+ int32_t iop_len;
+
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ iop_len = readl(&prbuffer->data_len);
+ while (iop_len > 0) {
+ acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
+ acb->rqbuf_lastindex++;
+ acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ iop_data++;
+ iop_len--;
+ }
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ memcpy(pcmdmessagefld->messagedatabuffer,
+ (uint8_t *)ver_addr, allxfer_len);
+ pcmdmessagefld->cmdmessage.Length = allxfer_len;
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ }
+ break;
+ case ARCMSR_MESSAGE_WRITE_WQBUFFER: {
+ unsigned long *ver_addr;
+ dma_addr_t buf_handle;
+ int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
+ uint8_t *pQbuffer, *ptmpuserbuffer;
+
+ ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
+ if (!ver_addr) {
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ goto message_out;
+ }
+ ptmpuserbuffer = (uint8_t *)ver_addr;
+ user_len = pcmdmessagefld->cmdmessage.Length;
+ memcpy(ptmpuserbuffer, pcmdmessagefld->messagedatabuffer, user_len);
+ wqbuf_lastindex = acb->wqbuf_lastindex;
+ wqbuf_firstindex = acb->wqbuf_firstindex;
+ if (wqbuf_lastindex != wqbuf_firstindex) {
+ struct SENSE_DATA *sensebuffer =
+ (struct SENSE_DATA *)cmd->sense_buffer;
+ arcmsr_post_Qbuffer(acb);
+ /* has error report sensedata */
+ sensebuffer->ErrorCode = 0x70;
+ sensebuffer->SenseKey = ILLEGAL_REQUEST;
+ sensebuffer->AdditionalSenseLength = 0x0A;
+ sensebuffer->AdditionalSenseCode = 0x20;
+ sensebuffer->Valid = 1;
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ } else {
+ my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1)
+ &(ARCMSR_MAX_QBUFFER - 1);
+ if (my_empty_len >= user_len) {
+ while (user_len > 0) {
+ pQbuffer =
+ &acb->wqbuffer[acb->wqbuf_lastindex];
+ memcpy(pQbuffer, ptmpuserbuffer, 1);
+ acb->wqbuf_lastindex++;
+ acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER;
+ ptmpuserbuffer++;
+ user_len--;
+ }
+ if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) {
+ acb->acb_flags &=
+ ~ACB_F_MESSAGE_WQBUFFER_CLEARED;
+ arcmsr_post_Qbuffer(acb);
+ }
+ } else {
+ /* has error report sensedata */
+ struct SENSE_DATA *sensebuffer =
+ (struct SENSE_DATA *)cmd->sense_buffer;
+ sensebuffer->ErrorCode = 0x70;
+ sensebuffer->SenseKey = ILLEGAL_REQUEST;
+ sensebuffer->AdditionalSenseLength = 0x0A;
+ sensebuffer->AdditionalSenseCode = 0x20;
+ sensebuffer->Valid = 1;
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ }
+ }
+ pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_RQBUFFER: {
+ uint8_t *pQbuffer = acb->rqbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK,
+ ®->inbound_doorbell);
+ }
+ acb->acb_flags |= ACB_F_MESSAGE_RQBUFFER_CLEARED;
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER);
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_WQBUFFER: {
+ uint8_t *pQbuffer = acb->wqbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED |
+ ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER);
+ pcmdmessagefld->cmdmessage.ReturnCode =
+ ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_CLEAR_ALLQBUFFER: {
+ uint8_t *pQbuffer;
+
+ if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
+ acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK
+ , ®->inbound_doorbell);
+ }
+ acb->acb_flags |=
+ (ACB_F_MESSAGE_WQBUFFER_CLEARED
+ | ACB_F_MESSAGE_RQBUFFER_CLEARED
+ | ACB_F_MESSAGE_WQBUFFER_READED);
+ acb->rqbuf_firstindex = 0;
+ acb->rqbuf_lastindex = 0;
+ acb->wqbuf_firstindex = 0;
+ acb->wqbuf_lastindex = 0;
+ pQbuffer = acb->rqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pQbuffer = acb->wqbuffer;
+ memset(pQbuffer, 0, sizeof (struct QBUFFER));
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_RETURN_CODE_3F: {
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_3F;
+ }
+ break;
+ case ARCMSR_MESSAGE_SAY_HELLO: {
+ int8_t * hello_string = "Hello! I am ARCMSR";
+
+ memcpy(pcmdmessagefld->messagedatabuffer, hello_string
+ , (int16_t)strlen(hello_string));
+ pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
+ }
+ break;
+ case ARCMSR_MESSAGE_SAY_GOODBYE:
+ arcmsr_iop_parking(acb);
+ break;
+ case ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE:
+ arcmsr_flush_adapter_cache(acb);
+ break;
+ default:
+ retvalue = ARCMSR_MESSAGE_FAIL;
+ }
+ message_out:
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ kunmap_atomic(buffer - sg->offset, KM_IRQ0);
+ }
+ return retvalue;
+}
+
+static struct CommandControlBlock *arcmsr_get_freeccb(struct AdapterControlBlock *acb)
+{
+ struct list_head *head = &acb->ccb_free_list;
+ struct CommandControlBlock *ccb = NULL;
+
+ if (!list_empty(head)) {
+ ccb = list_entry(head->next, struct CommandControlBlock, list);
+ list_del(head->next);
+ }
+ return ccb;
+}
+
+static void arcmsr_handle_virtual_command(struct AdapterControlBlock *acb,
+ struct scsi_cmnd *cmd)
+{
+ switch (cmd->cmnd[0]) {
+ case INQUIRY: {
+ unsigned char inqdata[36];
+ char *buffer;
+
+ if (cmd->device->lun) {
+ cmd->result = (DID_TIME_OUT << 16);
+ cmd->scsi_done(cmd);
+ return;
+ }
+ inqdata[0] = TYPE_PROCESSOR;
+ /* Periph Qualifier & Periph Dev Type */
+ inqdata[1] = 0;
+ /* rem media bit & Dev Type Modifier */
+ inqdata[2] = 0;
+ /* ISO,ECMA,& ANSI versions */
+ inqdata[4] = 31;
+ /* length of additional data */
+ strncpy(&inqdata[8], "Areca ", 8);
+ /* Vendor Identification */
+ strncpy(&inqdata[16], "RAID controller ", 16);
+ /* Product Identification */
+ strncpy(&inqdata[32], "R001", 4); /* Product Revision */
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+ } else {
+ buffer = cmd->request_buffer;
+ }
+ memcpy(buffer, inqdata, sizeof(inqdata));
+ if (cmd->use_sg) {
+ struct scatterlist *sg;
+
+ sg = (struct scatterlist *) cmd->request_buffer;
+ kunmap_atomic(buffer - sg->offset, KM_IRQ0);
+ }
+ cmd->scsi_done(cmd);
+ }
+ break;
+ case WRITE_BUFFER:
+ case READ_BUFFER: {
+ if (arcmsr_iop_message_xfer(acb, cmd))
+ cmd->result = (DID_ERROR << 16);
+ cmd->scsi_done(cmd);
+ }
+ break;
+ default:
+ cmd->scsi_done(cmd);
+ }
+}
+
+static int arcmsr_queue_command(struct scsi_cmnd *cmd,
+ void (* done)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ struct CommandControlBlock *ccb;
+ int target = cmd->device->id;
+ int lun = cmd->device->lun;
+
+ cmd->scsi_done = done;
+ cmd->host_scribble = NULL;
+ cmd->result = 0;
+ if (acb->acb_flags & ACB_F_BUS_RESET) {
+ printk(KERN_NOTICE "arcmsr%d: bus reset"
+ " and return busy \n"
+ , acb->host->host_no);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ if(target == 16) {
+ /* virtual device for iop message transfer */
+ arcmsr_handle_virtual_command(acb, cmd);
+ return 0;
+ }
+ if (acb->devstate[target][lun] == ARECA_RAID_GONE) {
+ uint8_t block_cmd;
+
+ block_cmd = cmd->cmnd[0] & 0x0f;
+ if (block_cmd == 0x08 || block_cmd == 0x0a) {
+ printk(KERN_NOTICE
+ "arcmsr%d: block 'read/write'"
+ "command with gone raid volume"
+ " Cmd=%2x, TargetId=%d, Lun=%d \n"
+ , acb->host->host_no
+ , cmd->cmnd[0]
+ , target, lun);
+ cmd->result = (DID_NO_CONNECT << 16);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
+ }
+ if (atomic_read(&acb->ccboutstandingcount) >=
+ ARCMSR_MAX_OUTSTANDING_CMD)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ ccb = arcmsr_get_freeccb(acb);
+ if (!ccb)
+ return SCSI_MLQUEUE_HOST_BUSY;
+ arcmsr_build_ccb(acb, ccb, cmd);
+ arcmsr_post_ccb(acb, ccb);
+ return 0;
+}
+
+static void arcmsr_get_firmware_spec(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ char *acb_firm_model = acb->firm_model;
+ char *acb_firm_version = acb->firm_version;
+ char __iomem *iop_firm_model = (char __iomem *) ®->message_rwbuffer[15];
+ char __iomem *iop_firm_version = (char __iomem *) ®->message_rwbuffer[17];
+ int count;
+
+ writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb))
+ printk(KERN_NOTICE
+ "arcmsr%d: wait "
+ "'get adapter firmware miscellaneous data' timeout \n"
+ , acb->host->host_no);
+ count = 8;
+ while (count) {
+ *acb_firm_model = readb(iop_firm_model);
+ acb_firm_model++;
+ iop_firm_model++;
+ count--;
+ }
+ count = 16;
+ while (count) {
+ *acb_firm_version = readb(iop_firm_version);
+ acb_firm_version++;
+ iop_firm_version++;
+ count--;
+ }
+ printk(KERN_INFO
+ "ARECA RAID ADAPTER%d: FIRMWARE VERSION %s \n"
+ , acb->host->host_no
+ , acb->firm_version);
+ acb->firm_request_len = readl(®->message_rwbuffer[1]);
+ acb->firm_numbers_queue = readl(®->message_rwbuffer[2]);
+ acb->firm_sdram_size = readl(®->message_rwbuffer[3]);
+ acb->firm_hd_channels = readl(®->message_rwbuffer[4]);
+}
+
+static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *poll_ccb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t flag_ccb, outbound_intstatus, poll_ccb_done = 0, poll_count = 0;
+ int id, lun;
+
+ polling_ccb_retry:
+ poll_count++;
+ outbound_intstatus = readl(®->outbound_intstatus)
+ & acb->outbound_int_enable;
+ writel(outbound_intstatus, ®->outbound_intstatus);/*clear interrupt*/
+ while (1) {
+ if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF) {
+ if (poll_ccb_done)
+ break;
+ else {
+ msleep(25);
+ if (poll_count > 100)
+ break;
+ goto polling_ccb_retry;
+ }
+ }
+ ccb = (struct CommandControlBlock *)
+ (acb->vir2phy_offset + (flag_ccb << 5));
+ if ((ccb->acb != acb) ||
+ (ccb->startdone != ARCMSR_CCB_START)) {
+ if ((ccb->startdone == ARCMSR_CCB_ABORTED) ||
+ (ccb == poll_ccb)) {
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d ccb='0x%p'"
+ " poll command abort successfully \n"
+ , acb->host->host_no
+ , ccb->pcmd->device->id
+ , ccb->pcmd->device->lun
+ , ccb);
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ poll_ccb_done = 1;
+ continue;
+ }
+ printk(KERN_NOTICE
+ "arcmsr%d: polling get an illegal ccb"
+ " command done ccb='0x%p'"
+ "ccboutstandingcount=%d \n"
+ , acb->host->host_no
+ , ccb
+ , atomic_read(&acb->ccboutstandingcount));
+ continue;
+ }
+ id = ccb->pcmd->device->id;
+ lun = ccb->pcmd->device->lun;
+ if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) {
+ if (acb->devstate[id][lun] == ARECA_RAID_GONE)
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ ccb->pcmd->result = DID_OK << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ } else {
+ switch(ccb->arcmsr_cdb.DeviceStatus) {
+ case ARCMSR_DEV_SELECT_TIMEOUT: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_TIME_OUT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_ABORTED:
+ case ARCMSR_DEV_INIT_FAIL: {
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ case ARCMSR_DEV_CHECK_CONDITION: {
+ acb->devstate[id][lun] = ARECA_RAID_GOOD;
+ arcmsr_report_sense_info(ccb);
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ break;
+ default:
+ printk(KERN_NOTICE
+ "arcmsr%d: scsi id=%d lun=%d"
+ " polling and getting command error done"
+ "but got unknown DeviceStatus = 0x%x \n"
+ , acb->host->host_no
+ , id
+ , lun
+ , ccb->arcmsr_cdb.DeviceStatus);
+ acb->devstate[id][lun] = ARECA_RAID_GONE;
+ ccb->pcmd->result = DID_BAD_TARGET << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ break;
+ }
+ }
+ }
+}
+
+static void arcmsr_iop_init(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ uint32_t intmask_org, mask, outbound_doorbell, firmware_state = 0;
+
+ do {
+ firmware_state = readl(®->outbound_msgaddr1);
+ } while (!(firmware_state & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK));
+ intmask_org = readl(®->outbound_intmask)
+ | ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE;
+ arcmsr_get_firmware_spec(acb);
+
+ acb->acb_flags |= ACB_F_MSG_START_BGRB;
+ writel(ARCMSR_INBOUND_MESG0_START_BGRB, ®->inbound_msgaddr0);
+ if (arcmsr_wait_msgint_ready(acb)) {
+ printk(KERN_NOTICE "arcmsr%d: "
+ "wait 'start adapter background rebulid' timeout\n",
+ acb->host->host_no);
+ }
+
+ outbound_doorbell = readl(®->outbound_doorbell);
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell);
+ mask = ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE
+ | ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
+ writel(intmask_org & mask, ®->outbound_intmask);
+ acb->outbound_int_enable = ~(intmask_org & mask) & 0x000000ff;
+ acb->acb_flags |= ACB_F_IOP_INITED;
+}
+
+static void arcmsr_iop_reset(struct AdapterControlBlock *acb)
+{
+ struct MessageUnit __iomem *reg = acb->pmu;
+ struct CommandControlBlock *ccb;
+ uint32_t intmask_org;
+ int i = 0;
+
+ if (atomic_read(&acb->ccboutstandingcount) != 0) {
+ /* talk to iop 331 outstanding command aborted */
+ arcmsr_abort_allcmd(acb);
+ /* wait for 3 sec for all command aborted*/
+ msleep_interruptible(3000);
+ /* disable all outbound interrupt */
+ intmask_org = arcmsr_disable_outbound_ints(acb);
+ /* clear all outbound posted Q */
+ for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++)
+ readl(®->outbound_queueport);
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ ccb = acb->pccb_pool[i];
+ if ((ccb->startdone == ARCMSR_CCB_START) ||
+ (ccb->startdone == ARCMSR_CCB_ABORTED)) {
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+ ccb->pcmd->result = DID_ABORT << 16;
+ arcmsr_ccb_complete(ccb, 1);
+ }
+ }
+ /* enable all outbound interrupt */
+ arcmsr_enable_outbound_ints(acb, intmask_org);
+ }
+ atomic_set(&acb->ccboutstandingcount, 0);
+}
+
+static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)cmd->device->host->hostdata;
+ int i;
+
+ acb->num_resets++;
+ acb->acb_flags |= ACB_F_BUS_RESET;
+ for (i = 0; i < 400; i++) {
+ if (!atomic_read(&acb->ccboutstandingcount))
+ break;
+ arcmsr_interrupt(acb);
+ msleep(25);
+ }
+ arcmsr_iop_reset(acb);
+ acb->acb_flags &= ~ACB_F_BUS_RESET;
+ return SUCCESS;
+}
+
+static void arcmsr_abort_one_cmd(struct AdapterControlBlock *acb,
+ struct CommandControlBlock *ccb)
+{
+ u32 intmask;
+
+ ccb->startdone = ARCMSR_CCB_ABORTED;
+
+ /*
+ ** Wait for 3 sec for all command done.
+ */
+ msleep_interruptible(3000);
+
+ intmask = arcmsr_disable_outbound_ints(acb);
+ arcmsr_polling_ccbdone(acb, ccb);
+ arcmsr_enable_outbound_ints(acb, intmask);
+}
+
+static int arcmsr_abort(struct scsi_cmnd *cmd)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *)cmd->device->host->hostdata;
+ int i = 0;
+
+ printk(KERN_NOTICE
+ "arcmsr%d: abort device command of scsi id=%d lun=%d \n",
+ acb->host->host_no, cmd->device->id, cmd->device->lun);
+ acb->num_aborts++;
+
+ /*
+ ************************************************
+ ** the all interrupt service routine is locked
+ ** we need to handle it as soon as possible and exit
+ ************************************************
+ */
+ if (!atomic_read(&acb->ccboutstandingcount))
+ return SUCCESS;
+
+ for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
+ struct CommandControlBlock *ccb = acb->pccb_pool[i];
+ if (ccb->startdone == ARCMSR_CCB_START && ccb->pcmd == cmd) {
+ arcmsr_abort_one_cmd(acb, ccb);
+ break;
+ }
+ }
+
+ return SUCCESS;
+}
+
+static const char *arcmsr_info(struct Scsi_Host *host)
+{
+ struct AdapterControlBlock *acb =
+ (struct AdapterControlBlock *) host->hostdata;
+ static char buf[256];
+ char *type;
+ int raid6 = 1;
+
+ switch (acb->pdev->device) {
+ case PCI_DEVICE_ID_ARECA_1110:
+ case PCI_DEVICE_ID_ARECA_1210:
+ raid6 = 0;
+ /*FALLTHRU*/
+ case PCI_DEVICE_ID_ARECA_1120:
+ case PCI_DEVICE_ID_ARECA_1130:
+ case PCI_DEVICE_ID_ARECA_1160:
+ case PCI_DEVICE_ID_ARECA_1170:
+ case PCI_DEVICE_ID_ARECA_1220:
+ case PCI_DEVICE_ID_ARECA_1230:
+ case PCI_DEVICE_ID_ARECA_1260:
+ case PCI_DEVICE_ID_ARECA_1270:
+ case PCI_DEVICE_ID_ARECA_1280:
+ type = "SATA";
+ break;
+ case PCI_DEVICE_ID_ARECA_1380:
+ case PCI_DEVICE_ID_ARECA_1381:
+ case PCI_DEVICE_ID_ARECA_1680:
+ case PCI_DEVICE_ID_ARECA_1681:
+ type = "SAS";
+ break;
+ default:
+ type = "X-TYPE";
+ break;
+ }
+ sprintf(buf, "Areca %s Host Adapter RAID Controller%s\n %s",
+ type, raid6 ? "( RAID6 capable)" : "",
+ ARCMSR_DRIVER_VERSION);
+ return buf;
+}
+
+
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index e133733..7b3bd34 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -46,7 +46,6 @@
#include <linux/stat.h>
#include <linux/slab.h> /* for kmalloc() */
-#include <linux/config.h> /* for CONFIG_PCI */
#include <linux/pci.h> /* for PCI support */
#include <linux/proc_fs.h>
#include <linux/blkdev.h>
@@ -185,7 +184,7 @@
PINFO("Detecting Adaptec I2O RAID controllers...\n");
/* search for all Adatpec I2O RAID cards */
- while ((pDev = pci_find_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
+ while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) {
if(pDev->device == PCI_DPT_DEVICE_ID ||
pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){
if(adpt_install_hba(sht, pDev) ){
@@ -193,8 +192,11 @@
PERROR("Will not try to detect others.\n");
return hba_count-1;
}
+ pci_dev_get(pDev);
}
}
+ if (pDev)
+ pci_dev_put(pDev);
/* In INIT state, Activate IOPs */
for (pHba = hba_chain; pHba; pHba = pHba->next) {
@@ -1076,6 +1078,7 @@
}
}
}
+ pci_dev_put(pHba->pDev);
kfree(pHba);
if(hba_count <= 0){
diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h
index 34bce2c..635c148 100644
--- a/drivers/scsi/eata_generic.h
+++ b/drivers/scsi/eata_generic.h
@@ -364,6 +364,7 @@
__u8 moresupport; /* HBA supports MORE flag */
struct Scsi_Host *next;
struct Scsi_Host *prev;
+ struct pci_dev *pdev; /* PCI device or NULL for non PCI */
struct eata_sp sp; /* status packet */
struct eata_ccb ccb[0]; /* ccb array begins here */
}hostdata;
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 771b019..d312633 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -71,11 +71,11 @@
#include "eata_pio.h"
-static uint ISAbases[MAXISA] = {
+static unsigned int ISAbases[MAXISA] = {
0x1F0, 0x170, 0x330, 0x230
};
-static uint ISAirqs[MAXISA] = {
+static unsigned int ISAirqs[MAXISA] = {
14, 12, 15, 11
};
@@ -84,7 +84,7 @@
1, 1, 1, 1, 1, 1, 1, 1
};
-static uint registered_HBAs;
+static unsigned int registered_HBAs;
static struct Scsi_Host *last_HBA;
static struct Scsi_Host *first_HBA;
static unsigned char reg_IRQ[16];
@@ -165,6 +165,7 @@
static int eata_pio_release(struct Scsi_Host *sh)
{
+ hostdata *hd = SD(sh);
if (sh->irq && reg_IRQ[sh->irq] == 1)
free_irq(sh->irq, NULL);
else
@@ -173,10 +174,13 @@
if (sh->io_port && sh->n_io_port)
release_region(sh->io_port, sh->n_io_port);
}
+ /* At this point the PCI reference can go */
+ if (hd->pdev)
+ pci_dev_put(hd->pdev);
return 1;
}
-static void IncStat(struct scsi_pointer *SCp, uint Increment)
+static void IncStat(struct scsi_pointer *SCp, unsigned int Increment)
{
SCp->ptr += Increment;
if ((SCp->this_residual -= Increment) == 0) {
@@ -190,46 +194,49 @@
}
}
-static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs);
static irqreturn_t do_eata_pio_int_handler(int irq, void *dev_id,
struct pt_regs *regs)
{
unsigned long flags;
struct Scsi_Host *dev = dev_id;
+ irqreturn_t ret;
spin_lock_irqsave(dev->host_lock, flags);
- eata_pio_int_handler(irq, dev_id, regs);
+ ret = eata_pio_int_handler(irq, dev_id, regs);
spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
+ return ret;
}
-static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs)
{
- uint eata_stat = 0xfffff;
+ unsigned int eata_stat = 0xfffff;
struct scsi_cmnd *cmd;
hostdata *hd;
struct eata_ccb *cp;
- uint base;
- uint x, z;
+ unsigned long base;
+ unsigned int x, z;
struct Scsi_Host *sh;
unsigned short zwickel = 0;
unsigned char stat, odd;
+ irqreturn_t ret = IRQ_NONE;
for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev)
{
if (sh->irq != irq)
continue;
- if (inb((uint) sh->base + HA_RSTATUS) & HA_SBUSY)
+ if (inb(sh->base + HA_RSTATUS) & HA_SBUSY)
continue;
int_counter++;
+ ret = IRQ_HANDLED;
hd = SD(sh);
cp = &hd->ccb[0];
cmd = cp->cmd;
- base = (uint) cmd->device->host->base;
+ base = cmd->device->host->base;
do {
stat = inb(base + HA_RSTATUS);
@@ -304,7 +311,7 @@
if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {
cmd->result = (DID_OK << 16);
hd->devflags |= (1 << cp->cp_id);
- } else if (hd->devflags & 1 << cp->cp_id)
+ } else if (hd->devflags & (1 << cp->cp_id))
cmd->result = (DID_OK << 16) + 0x02;
else
cmd->result = (DID_NO_CONNECT << 16);
@@ -313,7 +320,7 @@
cp->status = FREE;
eata_stat = inb(base + HA_RSTATUS);
printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n");
- return;
+ return ret;
}
#if DBG_INTR2
if (stat != 0x50)
@@ -325,12 +332,12 @@
cmd->scsi_done(cmd);
}
- return;
+ return ret;
}
-static inline uint eata_pio_send_command(uint base, unsigned char command)
+static inline unsigned int eata_pio_send_command(unsigned long base, unsigned char command)
{
- uint loop = HZ / 2;
+ unsigned int loop = 50;
while (inb(base + HA_RSTATUS) & HA_SBUSY)
if (--loop == 0)
@@ -349,8 +356,8 @@
static int eata_pio_queue(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
- uint x, y;
- uint base;
+ unsigned int x, y;
+ unsigned long base;
hostdata *hd;
struct Scsi_Host *sh;
@@ -360,7 +367,7 @@
hd = HD(cmd);
sh = cmd->device->host;
- base = (uint) sh->base;
+ base = sh->base;
/* use only slot 0, as 2001 can handle only one cmd at a time */
@@ -395,9 +402,9 @@
cp->DataIn = 0; /* Input mode */
cp->Interpret = (cmd->device->id == hd->hostid);
- cp->cp_datalen = htonl((unsigned long) cmd->request_bufflen);
+ cp->cp_datalen = cpu_to_be32(cmd->request_bufflen);
cp->Auto_Req_Sen = 0;
- cp->cp_reqDMA = htonl(0);
+ cp->cp_reqDMA = 0;
cp->reqlen = 0;
cp->cp_id = cmd->device->id;
@@ -406,7 +413,7 @@
cp->cp_identify = 1;
memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
- cp->cp_statDMA = htonl(0);
+ cp->cp_statDMA = 0;
cp->cp_viraddr = cp;
cp->cmd = cmd;
@@ -445,14 +452,14 @@
DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
"Queued base %#.4lx pid: %ld "
- "slot %d irq %d\n", (long) sh->base, cmd->pid, y, sh->irq));
+ "slot %d irq %d\n", sh->base, cmd->pid, y, sh->irq));
return (0);
}
static int eata_pio_abort(struct scsi_cmnd *cmd)
{
- uint loop = HZ;
+ unsigned int loop = 100;
DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
"eata_pio_abort called pid: %ld\n",
@@ -485,7 +492,7 @@
static int eata_pio_host_reset(struct scsi_cmnd *cmd)
{
- uint x, limit = 0;
+ unsigned int x, limit = 0;
unsigned char success = 0;
struct scsi_cmnd *sp;
struct Scsi_Host *host = cmd->device->host;
@@ -518,7 +525,7 @@
}
/* hard reset the HBA */
- outb(EATA_CMD_RESET, (uint) cmd->device->host->base + HA_WCOMMAND);
+ outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND);
DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
HD(cmd)->state = RESET;
@@ -558,7 +565,7 @@
}
}
-static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned long cplen, unsigned short cppadlen)
+static char *get_pio_board_data(unsigned long base, unsigned int irq, unsigned int id, unsigned long cplen, unsigned short cppadlen)
{
struct eata_ccb cp;
static char buff[256];
@@ -570,8 +577,8 @@
cp.DataIn = 1;
cp.Interpret = 1; /* Interpret command */
- cp.cp_datalen = htonl(254);
- cp.cp_dataDMA = htonl(0);
+ cp.cp_datalen = cpu_to_be32(254);
+ cp.cp_dataDMA = cpu_to_be32(0);
cp.cp_id = id;
cp.cp_lun = 0;
@@ -583,7 +590,7 @@
cp.cp_cdb[4] = 254;
cp.cp_cdb[5] = 0;
- if (eata_pio_send_command((uint) base, EATA_CMD_PIO_SEND_CP))
+ if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP))
return (NULL);
while (!(inb(base + HA_RSTATUS) & HA_SDRQ));
outsw(base + HA_RDATA, &cp, cplen);
@@ -604,7 +611,7 @@
}
}
-static int get_pio_conf_PIO(u32 base, struct get_conf *buf)
+static int get_pio_conf_PIO(unsigned long base, struct get_conf *buf)
{
unsigned long loop = HZ / 2;
int z;
@@ -619,30 +626,30 @@
if (--loop == 0)
goto fail;
- DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#x\n", base));
+ DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#lx\n", base));
eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
- loop = HZ / 2;
+ loop = 50;
for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) {
while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
if (--loop == 0)
goto fail;
- loop = HZ / 2;
+ loop = 50;
*p = inw(base + HA_RDATA);
}
if (inb(base + HA_RSTATUS) & HA_SERROR) {
DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during "
- "transfer for HBA at %x\n", base));
+ "transfer for HBA at %lx\n", base));
goto fail;
}
- if (htonl(EATA_SIGNATURE) != buf->signature)
+ if (cpu_to_be32(EATA_SIGNATURE) != buf->signature)
goto fail;
DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found "
- "at %#4x EATA Level: %x\n",
- base, (uint) (buf->version)));
+ "at %#4lx EATA Level: %x\n",
+ base, (unsigned int) (buf->version)));
while (inb(base + HA_RSTATUS) & HA_SDRQ)
inw(base + HA_RDATA);
@@ -665,12 +672,12 @@
static void print_pio_config(struct get_conf *gc)
{
printk("Please check values: (read config data)\n");
- printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", (uint) ntohl(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
- printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], ntohs(gc->queuesiz), ntohs(gc->SGsiz), gc->SECOND);
+ printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", be32_to_cpu(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
+ printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], be16_to_cpu(gc->queuesiz), be16_to_cpu(gc->SGsiz), gc->SECOND);
printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest);
}
-static uint print_selftest(uint base)
+static unsigned int print_selftest(unsigned int base)
{
unsigned char buffer[512];
#ifdef VERBOSE_SETUP
@@ -697,7 +704,7 @@
return (!(inb(base + HA_RSTATUS) & HA_SERROR));
}
-static int register_pio_HBA(long base, struct get_conf *gc)
+static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev)
{
unsigned long size = 0;
char *buff;
@@ -714,17 +721,17 @@
return 0;
}
- if ((buff = get_pio_board_data((uint) base, gc->IRQ, gc->scsi_id[3], cplen = (htonl(gc->cplen) + 1) / 2, cppadlen = (htons(gc->cppadlen) + 1) / 2)) == NULL) {
- printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", (unsigned long) base);
+ if ((buff = get_pio_board_data(base, gc->IRQ, gc->scsi_id[3], cplen = (cpu_to_be32(gc->cplen) + 1) / 2, cppadlen = (cpu_to_be16(gc->cppadlen) + 1) / 2)) == NULL) {
+ printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base);
return 0;
}
if (!print_selftest(base) && !ALLOW_DMA_BOARDS) {
- printk("HBA at %#lx failed while performing self test & setup.\n", (unsigned long) base);
+ printk("HBA at %#lx failed while performing self test & setup.\n", base);
return 0;
}
- size = sizeof(hostdata) + (sizeof(struct eata_ccb) * ntohs(gc->queuesiz));
+ size = sizeof(hostdata) + (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz));
sh = scsi_register(&driver_template, size);
if (sh == NULL)
@@ -749,8 +756,8 @@
hd = SD(sh);
- memset(hd->ccb, 0, (sizeof(struct eata_ccb) * ntohs(gc->queuesiz)));
- memset(hd->reads, 0, sizeof(unsigned long) * 26);
+ memset(hd->ccb, 0, (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz)));
+ memset(hd->reads, 0, sizeof(hd->reads));
strlcpy(SD(sh)->vendor, &buff[8], sizeof(SD(sh)->vendor));
strlcpy(SD(sh)->name, &buff[16], sizeof(SD(sh)->name));
@@ -761,7 +768,7 @@
SD(sh)->revision[4] = buff[35];
SD(sh)->revision[5] = 0;
- switch (ntohl(gc->len)) {
+ switch (be32_to_cpu(gc->len)) {
case 0x1c:
SD(sh)->EATA_revision = 'a';
break;
@@ -777,7 +784,7 @@
SD(sh)->EATA_revision = '?';
}
- if (ntohl(gc->len) >= 0x22) {
+ if (be32_to_cpu(gc->len) >= 0x22) {
if (gc->is_PCI)
hd->bustype = IS_PCI;
else if (gc->is_EISA)
@@ -811,6 +818,8 @@
hd->channel = 0;
+ hd->pdev = pci_dev_get(pdev); /* Keep a PCI reference */
+
sh->max_id = 8;
sh->max_lun = 8;
@@ -841,7 +850,7 @@
continue;
if (!get_pio_conf_PIO(ISAbases[i], buf))
continue;
- if (!register_pio_HBA(ISAbases[i], buf))
+ if (!register_pio_HBA(ISAbases[i], buf, NULL))
release_region(ISAbases[i], 9);
else
ISAbases[i] = 0;
@@ -873,7 +882,7 @@
if (get_pio_conf_PIO(base, buf)) {
DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
if (buf->IRQ) {
- if (!register_pio_HBA(base, buf))
+ if (!register_pio_HBA(base, buf, NULL))
release_region(base, 9);
} else {
printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n");
@@ -896,9 +905,9 @@
printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
#else
struct pci_dev *dev = NULL;
- u32 base, x;
+ unsigned long base, x;
- while ((dev = pci_find_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
+ while ((dev = pci_get_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", pci_name(dev)));
if (pci_enable_device(dev))
continue;
@@ -926,7 +935,7 @@
* eventually remove it from the EISA and ISA list
*/
- if (!register_pio_HBA(base, buf)) {
+ if (!register_pio_HBA(base, buf, dev)) {
release_region(base, 9);
continue;
}
@@ -976,12 +985,12 @@
printk("Registered HBAs:\n");
printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n");
for (i = 1; i <= registered_HBAs; i++) {
- printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4x %2d %d %d %c"
+ printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4lx %2d %d %d %c"
" %2d %2d %2d\n",
HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ?
"PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ",
- (uint) HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id,
+ HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id,
SD(HBA_ptr)->primary ? 'Y' : 'N', HBA_ptr->can_queue,
HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun);
HBA_ptr = SD(HBA_ptr)->next;
diff --git a/drivers/scsi/fcal.c b/drivers/scsi/fcal.c
index 7f89102..c4e16c0 100644
--- a/drivers/scsi/fcal.c
+++ b/drivers/scsi/fcal.c
@@ -248,8 +248,7 @@
if (scd->id == target) {
SPRINTF (" [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x] ",
alpa, target, u1[0], u1[1], u2[0], u2[1]);
- SPRINTF ("%s ", (scd->type < MAX_SCSI_DEVICE_CODE) ?
- scsi_device_types[(short) scd->type] : "Unknown device");
+ SPRINTF ("%s ", scsi_device_type(scd->type));
for (j = 0; (j < 8) && (scd->vendor[j] >= 0x20); j++)
SPRINTF ("%c", scd->vendor[j]);
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 67f1100f..cdd893b 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -811,7 +811,6 @@
struct NCR5380_hostdata *hostdata;
#ifdef NCR5380_STATS
struct scsi_device *dev;
- extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
#endif
NCR5380_setup(scsi_ptr);
@@ -851,7 +850,7 @@
long tr = hostdata->time_read[dev->id] / HZ;
long tw = hostdata->time_write[dev->id] / HZ;
- PRINTP(" T:%d %s " ANDP dev->id ANDP(dev->type < MAX_SCSI_DEVICE_CODE) ? scsi_device_types[(int) dev->type] : "Unknown");
+ PRINTP(" T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type));
for (i = 0; i < 8; i++)
if (dev->vendor[i] >= 0x20)
*(buffer + (len++)) = dev->vendor[i];
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index a0d831b..18dbe5c 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -47,7 +47,7 @@
gvp11_xfer_mask = ints[1];
}
-static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -142,8 +142,8 @@
return 0;
}
-static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
- int status)
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
+ int status)
{
/* stop DMA */
DMA(instance)->SP_DMA = 1;
@@ -341,7 +341,7 @@
return num_gvp11;
}
-static int gvp11_bus_reset(Scsi_Cmnd *cmd)
+static int gvp11_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
diff --git a/drivers/scsi/gvp11.h b/drivers/scsi/gvp11.h
index 575d219d..bf22859 100644
--- a/drivers/scsi/gvp11.h
+++ b/drivers/scsi/gvp11.h
@@ -13,10 +13,6 @@
int gvp11_detect(struct scsi_host_template *);
int gvp11_release(struct Scsi_Host *);
-const char *wd33c93_info(void);
-int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int wd33c93_abort(Scsi_Cmnd *);
-int wd33c93_reset(Scsi_Cmnd *, unsigned int);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index dfcb96f..68ef163 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -265,6 +265,9 @@
destroy_workqueue(shost->work_q);
scsi_destroy_command_freelist(shost);
+ if (shost->bqt)
+ blk_free_tags(shost->bqt);
+
kfree(shost->shost_data);
if (parent)
@@ -487,7 +490,9 @@
* @work: Work to queue for execution.
*
* Return value:
- * 0 on success / != 0 for error
+ * 1 - work queued for execution
+ * 0 - work is already queued
+ * -EINVAL - work queue doesn't exist
**/
int scsi_queue_work(struct Scsi_Host *shost, struct work_struct *work)
{
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index bcb3444..28bfb8f9 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -15,7 +15,6 @@
*
* For more information, visit http://www.highpoint-tech.com
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 01080b3..7ed4eef 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -175,6 +175,8 @@
"Qualified success"},
{0x01080000, 1, 1,
"FFFE: Soft device bus error recovered by the IOA"},
+ {0x01088100, 0, 1,
+ "4101: Soft device bus fabric error"},
{0x01170600, 0, 1,
"FFF9: Device sector reassign successful"},
{0x01170900, 0, 1,
@@ -225,6 +227,8 @@
"3109: IOA timed out a device command"},
{0x04088000, 0, 0,
"3120: SCSI bus is not operational"},
+ {0x04088100, 0, 1,
+ "4100: Hard device bus fabric error"},
{0x04118000, 0, 1,
"9000: IOA reserved area data check"},
{0x04118100, 0, 1,
@@ -273,6 +277,14 @@
"9091: Incorrect hardware configuration change has been detected"},
{0x04678000, 0, 1,
"9073: Invalid multi-adapter configuration"},
+ {0x04678100, 0, 1,
+ "4010: Incorrect connection between cascaded expanders"},
+ {0x04678200, 0, 1,
+ "4020: Connections exceed IOA design limits"},
+ {0x04678300, 0, 1,
+ "4030: Incorrect multipath connection"},
+ {0x04679000, 0, 1,
+ "4110: Unsupported enclosure function"},
{0x046E0000, 0, 1,
"FFF4: Command to logical unit failed"},
{0x05240000, 1, 0,
@@ -297,6 +309,8 @@
"9031: Array protection temporarily suspended, protection resuming"},
{0x06040600, 0, 1,
"9040: Array protection temporarily suspended, protection resuming"},
+ {0x06288000, 0, 1,
+ "3140: Device bus not ready to ready transition"},
{0x06290000, 0, 1,
"FFFB: SCSI bus was reset"},
{0x06290500, 0, 0,
@@ -319,6 +333,16 @@
"3150: SCSI bus configuration error"},
{0x06678100, 0, 1,
"9074: Asymmetric advanced function disk configuration"},
+ {0x06678300, 0, 1,
+ "4040: Incomplete multipath connection between IOA and enclosure"},
+ {0x06678400, 0, 1,
+ "4041: Incomplete multipath connection between enclosure and device"},
+ {0x06678500, 0, 1,
+ "9075: Incomplete multipath connection between IOA and remote IOA"},
+ {0x06678600, 0, 1,
+ "9076: Configuration error, missing remote IOA"},
+ {0x06679100, 0, 1,
+ "4050: Enclosure does not support a required multipath function"},
{0x06690200, 0, 1,
"9041: Array protection temporarily suspended"},
{0x06698200, 0, 1,
@@ -331,6 +355,10 @@
"9072: Link not operational transition"},
{0x066B8200, 0, 1,
"9032: Array exposed but still protected"},
+ {0x066B9100, 0, 1,
+ "4061: Multipath redundancy level got better"},
+ {0x066B9200, 0, 1,
+ "4060: Multipath redundancy level got worse"},
{0x07270000, 0, 0,
"Failure due to other device"},
{0x07278000, 0, 1,
@@ -4099,8 +4127,7 @@
{
struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
- if ((be32_to_cpu(ioasa->ioasc_specific) &
- (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0)
+ if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
return 0;
memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
@@ -4190,7 +4217,8 @@
case IPR_IOASC_NR_INIT_CMD_REQUIRED:
break;
default:
- scsi_cmd->result |= (DID_ERROR << 16);
+ if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
+ scsi_cmd->result |= (DID_ERROR << 16);
if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
res->needs_sync_complete = 1;
break;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 1ad24df..11eaff52 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -36,8 +36,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.1.3"
-#define IPR_DRIVER_DATE "(March 29, 2006)"
+#define IPR_DRIVER_VERSION "2.1.4"
+#define IPR_DRIVER_DATE "(August 2, 2006)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -45,6 +45,7 @@
* This can be adjusted at runtime through sysfs device attributes.
*/
#define IPR_MAX_CMD_PER_LUN 6
+#define IPR_MAX_CMD_PER_ATA_LUN 1
/*
* IPR_NUM_BASE_CMD_BLKS: This defines the maximum number of
@@ -106,7 +107,7 @@
#define IPR_IOA_BUS 0xff
#define IPR_IOA_TARGET 0xff
#define IPR_IOA_LUN 0xff
-#define IPR_MAX_NUM_BUSES 8
+#define IPR_MAX_NUM_BUSES 16
#define IPR_MAX_BUS_TO_SCAN IPR_MAX_NUM_BUSES
#define IPR_NUM_RESET_RELOAD_RETRIES 3
@@ -145,6 +146,7 @@
#define IPR_LUN_RESET 0x40
#define IPR_TARGET_RESET 0x20
#define IPR_BUS_RESET 0x10
+#define IPR_ATA_PHY_RESET 0x80
#define IPR_ID_HOST_RR_Q 0xC4
#define IPR_QUERY_IOA_CONFIG 0xC5
#define IPR_CANCEL_ALL_REQUESTS 0xCE
@@ -295,7 +297,11 @@
}__attribute__ ((packed));
struct ipr_config_table_entry {
- u8 service_level;
+ u8 proto;
+#define IPR_PROTO_SATA 0x02
+#define IPR_PROTO_SATA_ATAPI 0x03
+#define IPR_PROTO_SAS_STP 0x06
+#define IPR_PROTO_SAS_STP_ATAPI 0x07
u8 array_id;
u8 flags;
#define IPR_IS_IOA_RESOURCE 0x80
@@ -307,6 +313,7 @@
#define IPR_SUBTYPE_AF_DASD 0
#define IPR_SUBTYPE_GENERIC_SCSI 1
#define IPR_SUBTYPE_VOLUME_SET 2
+#define IPR_SUBTYPE_GENERIC_ATA 4
#define IPR_QUEUEING_MODEL(res) ((((res)->cfgte.flags) & 0x70) >> 4)
#define IPR_QUEUE_FROZEN_MODEL 0
@@ -350,6 +357,7 @@
#define IPR_RQTYPE_SCSICDB 0x00
#define IPR_RQTYPE_IOACMD 0x01
#define IPR_RQTYPE_HCAM 0x02
+#define IPR_RQTYPE_ATA_PASSTHRU 0x04
u8 luntar_luntrn;
@@ -373,6 +381,37 @@
__be16 timeout;
}__attribute__ ((packed, aligned(4)));
+struct ipr_ioarcb_ata_regs {
+ u8 flags;
+#define IPR_ATA_FLAG_PACKET_CMD 0x80
+#define IPR_ATA_FLAG_XFER_TYPE_DMA 0x40
+#define IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION 0x20
+ u8 reserved[3];
+
+ __be16 data;
+ u8 feature;
+ u8 nsect;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 command;
+ u8 reserved2[3];
+ u8 hob_feature;
+ u8 hob_nsect;
+ u8 hob_lbal;
+ u8 hob_lbam;
+ u8 hob_lbah;
+ u8 ctl;
+}__attribute__ ((packed, aligned(4)));
+
+struct ipr_ioarcb_add_data {
+ union {
+ struct ipr_ioarcb_ata_regs regs;
+ __be32 add_cmd_parms[10];
+ }u;
+}__attribute__ ((packed, aligned(4)));
+
/* IOA Request Control Block 128 bytes */
struct ipr_ioarcb {
__be32 ioarcb_host_pci_addr;
@@ -397,7 +436,7 @@
struct ipr_cmd_pkt cmd_pkt;
__be32 add_cmd_parms_len;
- __be32 add_cmd_parms[10];
+ struct ipr_ioarcb_add_data add_data;
}__attribute__((packed, aligned (4)));
struct ipr_ioadl_desc {
@@ -433,6 +472,21 @@
__be32 ioa_data[2];
}__attribute__((packed, aligned (4)));
+struct ipr_ioasa_gata {
+ u8 error;
+ u8 nsect; /* Interrupt reason */
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 status;
+ u8 alt_status; /* ATA CTL */
+ u8 hob_nsect;
+ u8 hob_lbal;
+ u8 hob_lbam;
+ u8 hob_lbah;
+}__attribute__((packed, aligned (4)));
+
struct ipr_auto_sense {
__be16 auto_sense_len;
__be16 ioa_data_len;
@@ -466,6 +520,7 @@
__be32 ioasc_specific; /* status code specific field */
#define IPR_ADDITIONAL_STATUS_FMT 0x80000000
#define IPR_AUTOSENSE_VALID 0x40000000
+#define IPR_ATA_DEVICE_WAS_RESET 0x20000000
#define IPR_IOASC_SPECIFIC_MASK 0x00ffffff
#define IPR_FIELD_POINTER_VALID (0x80000000 >> 8)
#define IPR_FIELD_POINTER_MASK 0x0000ffff
@@ -474,6 +529,7 @@
struct ipr_ioasa_vset vset;
struct ipr_ioasa_af_dasd dasd;
struct ipr_ioasa_gpdd gpdd;
+ struct ipr_ioasa_gata gata;
} u;
struct ipr_auto_sense auto_sense;
@@ -1308,6 +1364,22 @@
}
/**
+ * ipr_is_gata - Determine if a resource is a generic ATA resource
+ * @res: resource entry struct
+ *
+ * Return value:
+ * 1 if GATA / 0 if not GATA
+ **/
+static inline int ipr_is_gata(struct ipr_resource_entry *res)
+{
+ if (!ipr_is_ioa_resource(res) &&
+ IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_GENERIC_ATA)
+ return 1;
+ else
+ return 0;
+}
+
+/**
* ipr_is_naca_model - Determine if a resource is using NACA queueing model
* @res: resource entry struct
*
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 66a1ae1..0a9dbc5 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -26,7 +26,6 @@
* Zhenyu Wang
*/
-#include <linux/err.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/inet.h>
@@ -108,12 +107,9 @@
u8* crc)
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- struct hash_desc desc;
- desc.tfm = tcp_conn->tx_tfm;
- desc.flags = 0;
- crypto_hash_digest(&desc, &buf->sg, buf->sg.length, crc);
- buf->sg.length += sizeof(uint32_t);
+ crypto_hash_digest(&tcp_conn->tx_hash, &buf->sg, buf->sg.length, crc);
+ buf->sg.length = tcp_conn->hdr_size;
}
static inline int
@@ -285,7 +281,6 @@
{
struct iscsi_data *hdr;
struct scsi_cmnd *sc = ctask->sc;
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
hdr = &r2t->dtask.hdr;
memset(hdr, 0, sizeof(struct iscsi_data));
@@ -340,10 +335,12 @@
sg_count += sg->length;
}
BUG_ON(r2t->sg == NULL);
- } else
- iscsi_buf_init_iov(&tcp_ctask->sendbuf,
+ } else {
+ iscsi_buf_init_iov(&r2t->sendbuf,
(char*)sc->request_buffer + r2t->data_offset,
r2t->data_count);
+ r2t->sg = NULL;
+ }
}
/**
@@ -362,8 +359,11 @@
int r2tsn = be32_to_cpu(rhdr->r2tsn);
int rc;
- if (tcp_conn->in.datalen)
+ if (tcp_conn->in.datalen) {
+ printk(KERN_ERR "iscsi_tcp: invalid R2t with datalen %d\n",
+ tcp_conn->in.datalen);
return ISCSI_ERR_DATALEN;
+ }
if (tcp_ctask->exp_r2tsn && tcp_ctask->exp_r2tsn != r2tsn)
return ISCSI_ERR_R2TSN;
@@ -389,15 +389,23 @@
r2t->exp_statsn = rhdr->statsn;
r2t->data_length = be32_to_cpu(rhdr->data_length);
- if (r2t->data_length == 0 ||
- r2t->data_length > session->max_burst) {
+ if (r2t->data_length == 0) {
+ printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n");
spin_unlock(&session->lock);
return ISCSI_ERR_DATALEN;
}
+ if (r2t->data_length > session->max_burst)
+ debug_scsi("invalid R2T with data len %u and max burst %u."
+ "Attempting to execute request.\n",
+ r2t->data_length, session->max_burst);
+
r2t->data_offset = be32_to_cpu(rhdr->data_offset);
if (r2t->data_offset + r2t->data_length > ctask->total_length) {
spin_unlock(&session->lock);
+ printk(KERN_ERR "iscsi_tcp: invalid R2T with data len %u at "
+ "offset %u and total length %d\n", r2t->data_length,
+ r2t->data_offset, ctask->total_length);
return ISCSI_ERR_DATALEN;
}
@@ -456,14 +464,12 @@
}
if (conn->hdrdgst_en) {
- struct hash_desc desc;
struct scatterlist sg;
sg_init_one(&sg, (u8 *)hdr,
sizeof(struct iscsi_hdr) + ahslen);
- desc.tfm = tcp_conn->rx_tfm;
- desc.flags = 0;
- crypto_hash_digest(&desc, &sg, sg.length, (u8 *)&cdgst);
+ crypto_hash_digest(&tcp_conn->rx_hash, &sg, sg.length,
+ (u8 *)&cdgst);
rdgst = *(uint32_t*)((char*)hdr + sizeof(struct iscsi_hdr) +
ahslen);
if (cdgst != rdgst) {
@@ -499,7 +505,6 @@
goto copy_hdr;
spin_lock(&session->lock);
- iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
rc = __iscsi_complete_pdu(conn, hdr, NULL, 0);
spin_unlock(&session->lock);
break;
@@ -644,10 +649,9 @@
* byte counters.
**/
static inline int
-iscsi_tcp_copy(struct iscsi_conn *conn)
+iscsi_tcp_copy(struct iscsi_conn *conn, int buf_size)
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- int buf_size = tcp_conn->in.datalen;
int buf_left = buf_size - tcp_conn->data_copied;
int size = min(tcp_conn->in.copy, buf_left);
int rc;
@@ -672,15 +676,15 @@
}
static inline void
-partial_sg_digest_update(struct iscsi_tcp_conn *tcp_conn,
- struct scatterlist *sg, int offset, int length)
+partial_sg_digest_update(struct hash_desc *desc, struct scatterlist *sg,
+ int offset, int length)
{
struct scatterlist temp;
memcpy(&temp, sg, sizeof(struct scatterlist));
temp.offset = offset;
temp.length = length;
- crypto_hash_update(&tcp_conn->data_rx_hash, &temp, length);
+ crypto_hash_update(desc, &temp, length);
}
static void
@@ -689,7 +693,7 @@
struct scatterlist tmp;
sg_init_one(&tmp, buf, len);
- crypto_hash_update(&tcp_conn->data_rx_hash, &tmp, len);
+ crypto_hash_update(&tcp_conn->rx_hash, &tmp, len);
}
static int iscsi_scsi_data_in(struct iscsi_conn *conn)
@@ -744,10 +748,11 @@
if (conn->datadgst_en) {
if (!offset)
crypto_hash_update(
- &tcp_conn->data_rx_hash,
- &sg[i], sg[i].length);
+ &tcp_conn->rx_hash,
+ &sg[i], 1);
else
- partial_sg_digest_update(tcp_conn,
+ partial_sg_digest_update(
+ &tcp_conn->rx_hash,
&sg[i],
sg[i].offset + offset,
sg[i].length - offset);
@@ -761,8 +766,10 @@
/*
* data-in is complete, but buffer not...
*/
- partial_sg_digest_update(tcp_conn, &sg[i],
- sg[i].offset, sg[i].length-rc);
+ partial_sg_digest_update(&tcp_conn->rx_hash,
+ &sg[i],
+ sg[i].offset,
+ sg[i].length-rc);
rc = 0;
break;
}
@@ -779,7 +786,6 @@
(long)sc, sc->result, ctask->itt,
tcp_conn->in.hdr->flags);
spin_lock(&conn->session->lock);
- iscsi_tcp_cleanup_ctask(conn, ctask);
__iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0);
spin_unlock(&conn->session->lock);
}
@@ -799,9 +805,6 @@
rc = iscsi_scsi_data_in(conn);
break;
case ISCSI_OP_SCSI_CMD_RSP:
- spin_lock(&conn->session->lock);
- iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
- spin_unlock(&conn->session->lock);
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_ASYNC_EVENT:
@@ -810,7 +813,7 @@
* Collect data segment to the connection's data
* placeholder
*/
- if (iscsi_tcp_copy(conn)) {
+ if (iscsi_tcp_copy(conn, tcp_conn->in.datalen)) {
rc = -EAGAIN;
goto exit;
}
@@ -883,9 +886,8 @@
*/
rc = iscsi_tcp_hdr_recv(conn);
if (!rc && tcp_conn->in.datalen) {
- if (conn->datadgst_en) {
- crypto_hash_init(&tcp_conn->data_rx_hash);
- }
+ if (conn->datadgst_en)
+ crypto_hash_init(&tcp_conn->rx_hash);
tcp_conn->in_progress = IN_PROGRESS_DATA_RECV;
} else if (rc) {
iscsi_conn_failure(conn, rc);
@@ -898,10 +900,15 @@
debug_tcp("extra data_recv offset %d copy %d\n",
tcp_conn->in.offset, tcp_conn->in.copy);
- skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset,
- &recv_digest, 4);
- tcp_conn->in.offset += 4;
- tcp_conn->in.copy -= 4;
+ rc = iscsi_tcp_copy(conn, sizeof(uint32_t));
+ if (rc) {
+ if (rc == -EAGAIN)
+ goto again;
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ return 0;
+ }
+
+ memcpy(&recv_digest, conn->data, sizeof(uint32_t));
if (recv_digest != tcp_conn->in.datadgst) {
debug_tcp("iscsi_tcp: data digest error!"
"0x%x != 0x%x\n", recv_digest,
@@ -937,13 +944,14 @@
tcp_conn->in.padding);
memset(pad, 0, tcp_conn->in.padding);
sg_init_one(&sg, pad, tcp_conn->in.padding);
- crypto_hash_update(&tcp_conn->data_rx_hash,
+ crypto_hash_update(&tcp_conn->rx_hash,
&sg, sg.length);
}
- crypto_hash_final(&tcp_conn->data_rx_hash,
- (u8 *)&tcp_conn->in.datadgst);
+ crypto_hash_final(&tcp_conn->rx_hash,
+ (u8 *) &tcp_conn->in.datadgst);
debug_tcp("rx digest 0x%x\n", tcp_conn->in.datadgst);
tcp_conn->in_progress = IN_PROGRESS_DDIGEST_RECV;
+ tcp_conn->data_copied = 0;
} else
tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER;
}
@@ -1183,36 +1191,12 @@
static inline void
iscsi_data_digest_init(struct iscsi_tcp_conn *tcp_conn,
- struct iscsi_cmd_task *ctask)
+ struct iscsi_tcp_cmd_task *tcp_ctask)
{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
-
- crypto_hash_init(&tcp_conn->data_tx_hash);
+ crypto_hash_init(&tcp_conn->tx_hash);
tcp_ctask->digest_count = 4;
}
-static int
-iscsi_digest_final_send(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
- struct iscsi_buf *buf, uint32_t *digest, int final)
-{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- int rc = 0;
- int sent = 0;
-
- if (final)
- crypto_hash_final(&tcp_conn->data_tx_hash, (u8 *)digest);
-
- iscsi_buf_init_iov(buf, (char*)digest, 4);
- rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent);
- if (rc) {
- tcp_ctask->datadigest = *digest;
- tcp_ctask->xmstate |= XMSTATE_DATA_DIGEST;
- } else
- tcp_ctask->digest_count = 4;
- return rc;
-}
-
/**
* iscsi_solicit_data_cont - initialize next Data-Out
* @conn: iscsi connection
@@ -1230,7 +1214,6 @@
iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
struct iscsi_r2t_info *r2t, int left)
{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
struct iscsi_data *hdr;
struct scsi_cmnd *sc = ctask->sc;
int new_offset;
@@ -1259,27 +1242,30 @@
iscsi_buf_init_iov(&r2t->headbuf, (char*)hdr,
sizeof(struct iscsi_hdr));
- if (sc->use_sg && !iscsi_buf_left(&r2t->sendbuf)) {
- BUG_ON(tcp_ctask->bad_sg == r2t->sg);
+ if (iscsi_buf_left(&r2t->sendbuf))
+ return;
+
+ if (sc->use_sg) {
iscsi_buf_init_sg(&r2t->sendbuf, r2t->sg);
r2t->sg += 1;
- } else
- iscsi_buf_init_iov(&tcp_ctask->sendbuf,
+ } else {
+ iscsi_buf_init_iov(&r2t->sendbuf,
(char*)sc->request_buffer + new_offset,
r2t->data_count);
+ r2t->sg = NULL;
+ }
}
-static void
-iscsi_unsolicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+static void iscsi_set_padding(struct iscsi_tcp_cmd_task *tcp_ctask,
+ unsigned long len)
{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_data_task *dtask;
+ tcp_ctask->pad_count = len & (ISCSI_PAD_LEN - 1);
+ if (!tcp_ctask->pad_count)
+ return;
- dtask = tcp_ctask->dtask = &tcp_ctask->unsol_dtask;
- iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr,
- tcp_ctask->r2t_data_count);
- iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr,
- sizeof(struct iscsi_hdr));
+ tcp_ctask->pad_count = ISCSI_PAD_LEN - tcp_ctask->pad_count;
+ debug_scsi("write padding %d bytes\n", tcp_ctask->pad_count);
+ tcp_ctask->xmstate |= XMSTATE_W_PAD;
}
/**
@@ -1307,38 +1293,20 @@
if (sc->use_sg) {
struct scatterlist *sg = sc->request_buffer;
- iscsi_buf_init_sg(&tcp_ctask->sendbuf,
- &sg[tcp_ctask->sg_count++]);
- tcp_ctask->sg = sg;
+ iscsi_buf_init_sg(&tcp_ctask->sendbuf, sg);
+ tcp_ctask->sg = sg + 1;
tcp_ctask->bad_sg = sg + sc->use_sg;
- } else
+ } else {
iscsi_buf_init_iov(&tcp_ctask->sendbuf,
sc->request_buffer,
sc->request_bufflen);
-
- if (ctask->imm_count)
- tcp_ctask->xmstate |= XMSTATE_IMM_DATA;
-
- tcp_ctask->pad_count = ctask->total_length & (ISCSI_PAD_LEN-1);
- if (tcp_ctask->pad_count) {
- tcp_ctask->pad_count = ISCSI_PAD_LEN -
- tcp_ctask->pad_count;
- debug_scsi("write padding %d bytes\n",
- tcp_ctask->pad_count);
- tcp_ctask->xmstate |= XMSTATE_W_PAD;
+ tcp_ctask->sg = NULL;
+ tcp_ctask->bad_sg = NULL;
}
-
- if (ctask->unsol_count)
- tcp_ctask->xmstate |= XMSTATE_UNS_HDR |
- XMSTATE_UNS_INIT;
- tcp_ctask->r2t_data_count = ctask->total_length -
- ctask->imm_count -
- ctask->unsol_count;
-
- debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d "
- "r2t_data %d]\n",
+ debug_scsi("cmd [itt 0x%x total %d imm_data %d "
+ "unsol count %d, unsol offset %d]\n",
ctask->itt, ctask->total_length, ctask->imm_count,
- ctask->unsol_count, tcp_ctask->r2t_data_count);
+ ctask->unsol_count, ctask->unsol_offset);
} else
tcp_ctask->xmstate = XMSTATE_R_HDR;
@@ -1420,8 +1388,8 @@
}
static inline int
-handle_xmstate_r_hdr(struct iscsi_conn *conn,
- struct iscsi_tcp_cmd_task *tcp_ctask)
+iscsi_send_read_hdr(struct iscsi_conn *conn,
+ struct iscsi_tcp_cmd_task *tcp_ctask)
{
int rc;
@@ -1439,7 +1407,7 @@
}
static inline int
-handle_xmstate_w_hdr(struct iscsi_conn *conn,
+iscsi_send_write_hdr(struct iscsi_conn *conn,
struct iscsi_cmd_task *ctask)
{
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
@@ -1450,86 +1418,126 @@
iscsi_hdr_digest(conn, &tcp_ctask->headbuf,
(u8*)tcp_ctask->hdrext);
rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->imm_count);
- if (rc)
- tcp_ctask->xmstate |= XMSTATE_W_HDR;
- return rc;
-}
-
-static inline int
-handle_xmstate_data_digest(struct iscsi_conn *conn,
- struct iscsi_cmd_task *ctask)
-{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- int rc;
-
- tcp_ctask->xmstate &= ~XMSTATE_DATA_DIGEST;
- debug_tcp("resent data digest 0x%x\n", tcp_ctask->datadigest);
- rc = iscsi_digest_final_send(conn, ctask, &tcp_ctask->immbuf,
- &tcp_ctask->datadigest, 0);
if (rc) {
- tcp_ctask->xmstate |= XMSTATE_DATA_DIGEST;
- debug_tcp("resent data digest 0x%x fail!\n",
- tcp_ctask->datadigest);
+ tcp_ctask->xmstate |= XMSTATE_W_HDR;
+ return rc;
}
- return rc;
-}
+ if (ctask->imm_count) {
+ tcp_ctask->xmstate |= XMSTATE_IMM_DATA;
+ iscsi_set_padding(tcp_ctask, ctask->imm_count);
-static inline int
-handle_xmstate_imm_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
-{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- int rc;
-
- BUG_ON(!ctask->imm_count);
- tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA;
-
- if (conn->datadgst_en) {
- iscsi_data_digest_init(tcp_conn, ctask);
- tcp_ctask->immdigest = 0;
- }
-
- for (;;) {
- rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf,
- &ctask->imm_count, &tcp_ctask->sent);
- if (rc) {
- tcp_ctask->xmstate |= XMSTATE_IMM_DATA;
- if (conn->datadgst_en) {
- crypto_hash_final(&tcp_conn->data_tx_hash,
- (u8 *)&tcp_ctask->immdigest);
- debug_tcp("tx imm sendpage fail 0x%x\n",
- tcp_ctask->datadigest);
- }
- return rc;
+ if (ctask->conn->datadgst_en) {
+ iscsi_data_digest_init(ctask->conn->dd_data, tcp_ctask);
+ tcp_ctask->immdigest = 0;
}
- if (conn->datadgst_en)
- crypto_hash_update(&tcp_conn->data_tx_hash,
- &tcp_ctask->sendbuf.sg,
- tcp_ctask->sendbuf.sg.length);
-
- if (!ctask->imm_count)
- break;
- iscsi_buf_init_sg(&tcp_ctask->sendbuf,
- &tcp_ctask->sg[tcp_ctask->sg_count++]);
}
- if (conn->datadgst_en && !(tcp_ctask->xmstate & XMSTATE_W_PAD)) {
- rc = iscsi_digest_final_send(conn, ctask, &tcp_ctask->immbuf,
- &tcp_ctask->immdigest, 1);
- if (rc) {
- debug_tcp("sending imm digest 0x%x fail!\n",
- tcp_ctask->immdigest);
- return rc;
- }
- debug_tcp("sending imm digest 0x%x\n", tcp_ctask->immdigest);
- }
-
+ if (ctask->unsol_count)
+ tcp_ctask->xmstate |= XMSTATE_UNS_HDR | XMSTATE_UNS_INIT;
return 0;
}
-static inline int
-handle_xmstate_uns_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+static int
+iscsi_send_padding(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+{
+ struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+ int sent = 0, rc;
+
+ if (tcp_ctask->xmstate & XMSTATE_W_PAD) {
+ iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad,
+ tcp_ctask->pad_count);
+ if (conn->datadgst_en)
+ crypto_hash_update(&tcp_conn->tx_hash,
+ &tcp_ctask->sendbuf.sg,
+ tcp_ctask->sendbuf.sg.length);
+ } else if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_PAD))
+ return 0;
+
+ tcp_ctask->xmstate &= ~XMSTATE_W_PAD;
+ tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_PAD;
+ debug_scsi("sending %d pad bytes for itt 0x%x\n",
+ tcp_ctask->pad_count, ctask->itt);
+ rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count,
+ &sent);
+ if (rc) {
+ debug_scsi("padding send failed %d\n", rc);
+ tcp_ctask->xmstate |= XMSTATE_W_RESEND_PAD;
+ }
+ return rc;
+}
+
+static int
+iscsi_send_digest(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
+ struct iscsi_buf *buf, uint32_t *digest)
+{
+ struct iscsi_tcp_cmd_task *tcp_ctask;
+ struct iscsi_tcp_conn *tcp_conn;
+ int rc, sent = 0;
+
+ if (!conn->datadgst_en)
+ return 0;
+
+ tcp_ctask = ctask->dd_data;
+ tcp_conn = conn->dd_data;
+
+ if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_DATA_DIGEST)) {
+ crypto_hash_final(&tcp_conn->tx_hash, (u8*)digest);
+ iscsi_buf_init_iov(buf, (char*)digest, 4);
+ }
+ tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_DATA_DIGEST;
+
+ rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent);
+ if (!rc)
+ debug_scsi("sent digest 0x%x for itt 0x%x\n", *digest,
+ ctask->itt);
+ else {
+ debug_scsi("sending digest 0x%x failed for itt 0x%x!\n",
+ *digest, ctask->itt);
+ tcp_ctask->xmstate |= XMSTATE_W_RESEND_DATA_DIGEST;
+ }
+ return rc;
+}
+
+static int
+iscsi_send_data(struct iscsi_cmd_task *ctask, struct iscsi_buf *sendbuf,
+ struct scatterlist **sg, int *sent, int *count,
+ struct iscsi_buf *digestbuf, uint32_t *digest)
+{
+ struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
+ struct iscsi_conn *conn = ctask->conn;
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+ int rc, buf_sent, offset;
+
+ while (*count) {
+ buf_sent = 0;
+ offset = sendbuf->sent;
+
+ rc = iscsi_sendpage(conn, sendbuf, count, &buf_sent);
+ *sent = *sent + buf_sent;
+ if (buf_sent && conn->datadgst_en)
+ partial_sg_digest_update(&tcp_conn->tx_hash,
+ &sendbuf->sg, sendbuf->sg.offset + offset,
+ buf_sent);
+ if (!iscsi_buf_left(sendbuf) && *sg != tcp_ctask->bad_sg) {
+ iscsi_buf_init_sg(sendbuf, *sg);
+ *sg = *sg + 1;
+ }
+
+ if (rc)
+ return rc;
+ }
+
+ rc = iscsi_send_padding(conn, ctask);
+ if (rc)
+ return rc;
+
+ return iscsi_send_digest(conn, ctask, digestbuf, digest);
+}
+
+static int
+iscsi_send_unsol_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
struct iscsi_data_task *dtask;
@@ -1537,12 +1545,17 @@
tcp_ctask->xmstate |= XMSTATE_UNS_DATA;
if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) {
- iscsi_unsolicit_data_init(conn, ctask);
- dtask = tcp_ctask->dtask;
+ dtask = &tcp_ctask->unsol_dtask;
+
+ iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr);
+ iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr,
+ sizeof(struct iscsi_hdr));
if (conn->hdrdgst_en)
iscsi_hdr_digest(conn, &tcp_ctask->headbuf,
(u8*)dtask->hdrext);
+
tcp_ctask->xmstate &= ~XMSTATE_UNS_INIT;
+ iscsi_set_padding(tcp_ctask, ctask->data_count);
}
rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->data_count);
@@ -1552,256 +1565,138 @@
return rc;
}
+ if (conn->datadgst_en) {
+ dtask = &tcp_ctask->unsol_dtask;
+ iscsi_data_digest_init(ctask->conn->dd_data, tcp_ctask);
+ dtask->digest = 0;
+ }
+
debug_scsi("uns dout [itt 0x%x dlen %d sent %d]\n",
ctask->itt, ctask->unsol_count, tcp_ctask->sent);
return 0;
}
-static inline int
-handle_xmstate_uns_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+static int
+iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_data_task *dtask = tcp_ctask->dtask;
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
int rc;
- BUG_ON(!ctask->data_count);
- tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA;
-
- if (conn->datadgst_en) {
- iscsi_data_digest_init(tcp_conn, ctask);
- dtask->digest = 0;
+ if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) {
+ BUG_ON(!ctask->unsol_count);
+ tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR;
+send_hdr:
+ rc = iscsi_send_unsol_hdr(conn, ctask);
+ if (rc)
+ return rc;
}
- for (;;) {
+ if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) {
+ struct iscsi_data_task *dtask = &tcp_ctask->unsol_dtask;
int start = tcp_ctask->sent;
- rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf,
- &ctask->data_count, &tcp_ctask->sent);
- if (rc) {
- ctask->unsol_count -= tcp_ctask->sent - start;
- tcp_ctask->xmstate |= XMSTATE_UNS_DATA;
- /* will continue with this ctask later.. */
- if (conn->datadgst_en) {
- crypto_hash_final(&tcp_conn->data_tx_hash,
- (u8 *)&dtask->digest);
- debug_tcp("tx uns data fail 0x%x\n",
- dtask->digest);
- }
- return rc;
- }
-
- BUG_ON(tcp_ctask->sent > ctask->total_length);
+ rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg,
+ &tcp_ctask->sent, &ctask->data_count,
+ &dtask->digestbuf, &dtask->digest);
ctask->unsol_count -= tcp_ctask->sent - start;
-
- /*
- * XXX:we may run here with un-initial sendbuf.
- * so pass it
- */
- if (conn->datadgst_en && tcp_ctask->sent - start > 0)
- crypto_hash_update(&tcp_conn->data_tx_hash,
- &tcp_ctask->sendbuf.sg,
- tcp_ctask->sendbuf.sg.length);
-
- if (!ctask->data_count)
- break;
- iscsi_buf_init_sg(&tcp_ctask->sendbuf,
- &tcp_ctask->sg[tcp_ctask->sg_count++]);
- }
- BUG_ON(ctask->unsol_count < 0);
-
- /*
- * Done with the Data-Out. Next, check if we need
- * to send another unsolicited Data-Out.
- */
- if (ctask->unsol_count) {
- if (conn->datadgst_en) {
- rc = iscsi_digest_final_send(conn, ctask,
- &dtask->digestbuf,
- &dtask->digest, 1);
- if (rc) {
- debug_tcp("send uns digest 0x%x fail\n",
- dtask->digest);
- return rc;
- }
- debug_tcp("sending uns digest 0x%x, more uns\n",
- dtask->digest);
- }
- tcp_ctask->xmstate |= XMSTATE_UNS_INIT;
- return 1;
- }
-
- if (conn->datadgst_en && !(tcp_ctask->xmstate & XMSTATE_W_PAD)) {
- rc = iscsi_digest_final_send(conn, ctask,
- &dtask->digestbuf,
- &dtask->digest, 1);
- if (rc) {
- debug_tcp("send last uns digest 0x%x fail\n",
- dtask->digest);
+ if (rc)
return rc;
+ tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA;
+ /*
+ * Done with the Data-Out. Next, check if we need
+ * to send another unsolicited Data-Out.
+ */
+ if (ctask->unsol_count) {
+ debug_scsi("sending more uns\n");
+ tcp_ctask->xmstate |= XMSTATE_UNS_INIT;
+ goto send_hdr;
}
- debug_tcp("sending uns digest 0x%x\n",dtask->digest);
}
-
return 0;
}
-static inline int
-handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+static int iscsi_send_sol_pdu(struct iscsi_conn *conn,
+ struct iscsi_cmd_task *ctask)
{
- struct iscsi_session *session = conn->session;
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_r2t_info *r2t = tcp_ctask->r2t;
- struct iscsi_data_task *dtask = &r2t->dtask;
+ struct iscsi_session *session = conn->session;
+ struct iscsi_r2t_info *r2t;
+ struct iscsi_data_task *dtask;
int left, rc;
- tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA;
- tcp_ctask->dtask = dtask;
-
- if (conn->datadgst_en) {
- iscsi_data_digest_init(tcp_conn, ctask);
- dtask->digest = 0;
- }
-solicit_again:
- /*
- * send Data-Out within this R2T sequence.
- */
- if (!r2t->data_count)
- goto data_out_done;
-
- rc = iscsi_sendpage(conn, &r2t->sendbuf, &r2t->data_count, &r2t->sent);
- if (rc) {
- tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
- /* will continue with this ctask later.. */
- if (conn->datadgst_en) {
- crypto_hash_final(&tcp_conn->data_tx_hash,
- (u8 *)&dtask->digest);
- debug_tcp("r2t data send fail 0x%x\n", dtask->digest);
- }
- return rc;
- }
-
- BUG_ON(r2t->data_count < 0);
- if (conn->datadgst_en)
- crypto_hash_update(&tcp_conn->data_tx_hash, &r2t->sendbuf.sg,
- r2t->sendbuf.sg.length);
-
- if (r2t->data_count) {
- BUG_ON(ctask->sc->use_sg == 0);
- if (!iscsi_buf_left(&r2t->sendbuf)) {
- BUG_ON(tcp_ctask->bad_sg == r2t->sg);
- iscsi_buf_init_sg(&r2t->sendbuf, r2t->sg);
- r2t->sg += 1;
- }
- goto solicit_again;
- }
-
-data_out_done:
- /*
- * Done with this Data-Out. Next, check if we have
- * to send another Data-Out for this R2T.
- */
- BUG_ON(r2t->data_length - r2t->sent < 0);
- left = r2t->data_length - r2t->sent;
- if (left) {
- if (conn->datadgst_en) {
- rc = iscsi_digest_final_send(conn, ctask,
- &dtask->digestbuf,
- &dtask->digest, 1);
- if (rc) {
- debug_tcp("send r2t data digest 0x%x"
- "fail\n", dtask->digest);
- return rc;
- }
- debug_tcp("r2t data send digest 0x%x\n",
- dtask->digest);
- }
- iscsi_solicit_data_cont(conn, ctask, r2t, left);
- tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
+ if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) {
tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
- return 1;
- }
+ tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
+ if (!tcp_ctask->r2t)
+ __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t,
+ sizeof(void*));
+send_hdr:
+ r2t = tcp_ctask->r2t;
+ dtask = &r2t->dtask;
- /*
- * Done with this R2T. Check if there are more
- * outstanding R2Ts ready to be processed.
- */
- BUG_ON(tcp_ctask->r2t_data_count - r2t->data_length < 0);
- if (conn->datadgst_en) {
- rc = iscsi_digest_final_send(conn, ctask, &dtask->digestbuf,
- &dtask->digest, 1);
+ if (conn->hdrdgst_en)
+ iscsi_hdr_digest(conn, &r2t->headbuf,
+ (u8*)dtask->hdrext);
+ rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count);
if (rc) {
- debug_tcp("send last r2t data digest 0x%x"
- "fail\n", dtask->digest);
+ tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA;
+ tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
return rc;
}
- debug_tcp("r2t done dout digest 0x%x\n", dtask->digest);
- }
- tcp_ctask->r2t_data_count -= r2t->data_length;
- tcp_ctask->r2t = NULL;
- spin_lock_bh(&session->lock);
- __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*));
- spin_unlock_bh(&session->lock);
- if (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) {
- tcp_ctask->r2t = r2t;
- tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
- tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
- return 1;
- }
-
- return 0;
-}
-
-static inline int
-handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
-{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- struct iscsi_data_task *dtask = tcp_ctask->dtask;
- int sent = 0, rc;
-
- tcp_ctask->xmstate &= ~XMSTATE_W_PAD;
- iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad,
- tcp_ctask->pad_count);
- rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count,
- &sent);
- if (rc) {
- tcp_ctask->xmstate |= XMSTATE_W_PAD;
- return rc;
- }
-
- if (conn->datadgst_en) {
- crypto_hash_update(&tcp_conn->data_tx_hash,
- &tcp_ctask->sendbuf.sg,
- tcp_ctask->sendbuf.sg.length);
- /* imm data? */
- if (!dtask) {
- rc = iscsi_digest_final_send(conn, ctask,
- &tcp_ctask->immbuf,
- &tcp_ctask->immdigest, 1);
- if (rc) {
- debug_tcp("send padding digest 0x%x"
- "fail!\n", tcp_ctask->immdigest);
- return rc;
- }
- debug_tcp("done with padding, digest 0x%x\n",
- tcp_ctask->datadigest);
- } else {
- rc = iscsi_digest_final_send(conn, ctask,
- &dtask->digestbuf,
- &dtask->digest, 1);
- if (rc) {
- debug_tcp("send padding digest 0x%x"
- "fail\n", dtask->digest);
- return rc;
- }
- debug_tcp("done with padding, digest 0x%x\n",
- dtask->digest);
+ if (conn->datadgst_en) {
+ iscsi_data_digest_init(conn->dd_data, tcp_ctask);
+ dtask->digest = 0;
}
+
+ iscsi_set_padding(tcp_ctask, r2t->data_count);
+ debug_scsi("sol dout [dsn %d itt 0x%x dlen %d sent %d]\n",
+ r2t->solicit_datasn - 1, ctask->itt, r2t->data_count,
+ r2t->sent);
}
+ if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) {
+ r2t = tcp_ctask->r2t;
+ dtask = &r2t->dtask;
+
+ rc = iscsi_send_data(ctask, &r2t->sendbuf, &r2t->sg,
+ &r2t->sent, &r2t->data_count,
+ &dtask->digestbuf, &dtask->digest);
+ if (rc)
+ return rc;
+ tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA;
+
+ /*
+ * Done with this Data-Out. Next, check if we have
+ * to send another Data-Out for this R2T.
+ */
+ BUG_ON(r2t->data_length - r2t->sent < 0);
+ left = r2t->data_length - r2t->sent;
+ if (left) {
+ iscsi_solicit_data_cont(conn, ctask, r2t, left);
+ tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
+ tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
+ goto send_hdr;
+ }
+
+ /*
+ * Done with this R2T. Check if there are more
+ * outstanding R2Ts ready to be processed.
+ */
+ spin_lock_bh(&session->lock);
+ tcp_ctask->r2t = NULL;
+ __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
+ sizeof(void*));
+ if (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t,
+ sizeof(void*))) {
+ tcp_ctask->r2t = r2t;
+ tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
+ tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
+ spin_unlock_bh(&session->lock);
+ goto send_hdr;
+ }
+ spin_unlock_bh(&session->lock);
+ }
return 0;
}
@@ -1821,85 +1716,30 @@
return rc;
if (tcp_ctask->xmstate & XMSTATE_R_HDR)
- return handle_xmstate_r_hdr(conn, tcp_ctask);
+ return iscsi_send_read_hdr(conn, tcp_ctask);
if (tcp_ctask->xmstate & XMSTATE_W_HDR) {
- rc = handle_xmstate_w_hdr(conn, ctask);
- if (rc)
- return rc;
- }
-
- /* XXX: for data digest xmit recover */
- if (tcp_ctask->xmstate & XMSTATE_DATA_DIGEST) {
- rc = handle_xmstate_data_digest(conn, ctask);
+ rc = iscsi_send_write_hdr(conn, ctask);
if (rc)
return rc;
}
if (tcp_ctask->xmstate & XMSTATE_IMM_DATA) {
- rc = handle_xmstate_imm_data(conn, ctask);
+ rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg,
+ &tcp_ctask->sent, &ctask->imm_count,
+ &tcp_ctask->immbuf, &tcp_ctask->immdigest);
if (rc)
return rc;
+ tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA;
}
- if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) {
- BUG_ON(!ctask->unsol_count);
- tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR;
-unsolicit_head_again:
- rc = handle_xmstate_uns_hdr(conn, ctask);
- if (rc)
- return rc;
- }
+ rc = iscsi_send_unsol_pdu(conn, ctask);
+ if (rc)
+ return rc;
- if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) {
- rc = handle_xmstate_uns_data(conn, ctask);
- if (rc == 1)
- goto unsolicit_head_again;
- else if (rc)
- return rc;
- goto done;
- }
-
- if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) {
- struct iscsi_r2t_info *r2t;
-
- tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
- tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
- if (!tcp_ctask->r2t)
- __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t,
- sizeof(void*));
-solicit_head_again:
- r2t = tcp_ctask->r2t;
- if (conn->hdrdgst_en)
- iscsi_hdr_digest(conn, &r2t->headbuf,
- (u8*)r2t->dtask.hdrext);
- rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count);
- if (rc) {
- tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA;
- tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
- return rc;
- }
-
- debug_scsi("sol dout [dsn %d itt 0x%x dlen %d sent %d]\n",
- r2t->solicit_datasn - 1, ctask->itt, r2t->data_count,
- r2t->sent);
- }
-
- if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) {
- rc = handle_xmstate_sol_data(conn, ctask);
- if (rc == 1)
- goto solicit_head_again;
- if (rc)
- return rc;
- }
-
-done:
- /*
- * Last thing to check is whether we need to send write
- * padding. Note that we check for xmstate equality, not just the bit.
- */
- if (tcp_ctask->xmstate == XMSTATE_W_PAD)
- rc = handle_xmstate_w_pad(conn, ctask);
+ rc = iscsi_send_sol_pdu(conn, ctask);
+ if (rc)
+ return rc;
return rc;
}
@@ -1931,8 +1771,24 @@
/* initial operational parameters */
tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
+ tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
+ CRYPTO_ALG_ASYNC);
+ tcp_conn->tx_hash.flags = 0;
+ if (!tcp_conn->tx_hash.tfm)
+ goto free_tcp_conn;
+
+ tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
+ CRYPTO_ALG_ASYNC);
+ tcp_conn->rx_hash.flags = 0;
+ if (!tcp_conn->rx_hash.tfm)
+ goto free_tx_tfm;
+
return cls_conn;
+free_tx_tfm:
+ crypto_free_hash(tcp_conn->tx_hash.tfm);
+free_tcp_conn:
+ kfree(tcp_conn);
tcp_conn_alloc_fail:
iscsi_conn_teardown(cls_conn);
return NULL;
@@ -1970,14 +1826,10 @@
/* now free tcp_conn */
if (digest) {
- if (tcp_conn->tx_tfm)
- crypto_free_hash(tcp_conn->tx_tfm);
- if (tcp_conn->rx_tfm)
- crypto_free_hash(tcp_conn->rx_tfm);
- if (tcp_conn->data_tx_hash.tfm)
- crypto_free_hash(tcp_conn->data_tx_hash.tfm);
- if (tcp_conn->data_rx_hash.tfm)
- crypto_free_hash(tcp_conn->data_rx_hash.tfm);
+ if (tcp_conn->tx_hash.tfm)
+ crypto_free_hash(tcp_conn->tx_hash.tfm);
+ if (tcp_conn->rx_hash.tfm)
+ crypto_free_hash(tcp_conn->rx_hash.tfm);
}
kfree(tcp_conn);
@@ -1987,9 +1839,11 @@
iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
{
struct iscsi_conn *conn = cls_conn->dd_data;
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
iscsi_conn_stop(cls_conn, flag);
iscsi_tcp_release_conn(conn);
+ tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
}
static int
@@ -2135,52 +1989,11 @@
case ISCSI_PARAM_HDRDGST_EN:
iscsi_set_param(cls_conn, param, buf, buflen);
tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
- if (conn->hdrdgst_en) {
+ if (conn->hdrdgst_en)
tcp_conn->hdr_size += sizeof(__u32);
- if (!tcp_conn->tx_tfm)
- tcp_conn->tx_tfm =
- crypto_alloc_hash("crc32c", 0,
- CRYPTO_ALG_ASYNC);
- if (IS_ERR(tcp_conn->tx_tfm))
- return PTR_ERR(tcp_conn->tx_tfm);
- if (!tcp_conn->rx_tfm)
- tcp_conn->rx_tfm =
- crypto_alloc_hash("crc32c", 0,
- CRYPTO_ALG_ASYNC);
- if (IS_ERR(tcp_conn->rx_tfm)) {
- crypto_free_hash(tcp_conn->tx_tfm);
- return PTR_ERR(tcp_conn->rx_tfm);
- }
- } else {
- if (tcp_conn->tx_tfm)
- crypto_free_hash(tcp_conn->tx_tfm);
- if (tcp_conn->rx_tfm)
- crypto_free_hash(tcp_conn->rx_tfm);
- }
break;
case ISCSI_PARAM_DATADGST_EN:
iscsi_set_param(cls_conn, param, buf, buflen);
- if (conn->datadgst_en) {
- if (!tcp_conn->data_tx_hash.tfm)
- tcp_conn->data_tx_hash.tfm =
- crypto_alloc_hash("crc32c", 0,
- CRYPTO_ALG_ASYNC);
- if (IS_ERR(tcp_conn->data_tx_hash.tfm))
- return PTR_ERR(tcp_conn->data_tx_hash.tfm);
- if (!tcp_conn->data_rx_hash.tfm)
- tcp_conn->data_rx_hash.tfm =
- crypto_alloc_hash("crc32c", 0,
- CRYPTO_ALG_ASYNC);
- if (IS_ERR(tcp_conn->data_rx_hash.tfm)) {
- crypto_free_hash(tcp_conn->data_tx_hash.tfm);
- return PTR_ERR(tcp_conn->data_rx_hash.tfm);
- }
- } else {
- if (tcp_conn->data_tx_hash.tfm)
- crypto_free_hash(tcp_conn->data_tx_hash.tfm);
- if (tcp_conn->data_rx_hash.tfm)
- crypto_free_hash(tcp_conn->data_rx_hash.tfm);
- }
tcp_conn->sendpage = conn->datadgst_en ?
sock_no_sendpage : tcp_conn->sock->ops->sendpage;
break;
diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h
index e357013..3273683 100644
--- a/drivers/scsi/iscsi_tcp.h
+++ b/drivers/scsi/iscsi_tcp.h
@@ -31,23 +31,21 @@
#define IN_PROGRESS_DDIGEST_RECV 0x3
/* xmit state machine */
-#define XMSTATE_IDLE 0x0
-#define XMSTATE_R_HDR 0x1
-#define XMSTATE_W_HDR 0x2
-#define XMSTATE_IMM_HDR 0x4
-#define XMSTATE_IMM_DATA 0x8
-#define XMSTATE_UNS_INIT 0x10
-#define XMSTATE_UNS_HDR 0x20
-#define XMSTATE_UNS_DATA 0x40
-#define XMSTATE_SOL_HDR 0x80
-#define XMSTATE_SOL_DATA 0x100
-#define XMSTATE_W_PAD 0x200
-#define XMSTATE_DATA_DIGEST 0x400
+#define XMSTATE_IDLE 0x0
+#define XMSTATE_R_HDR 0x1
+#define XMSTATE_W_HDR 0x2
+#define XMSTATE_IMM_HDR 0x4
+#define XMSTATE_IMM_DATA 0x8
+#define XMSTATE_UNS_INIT 0x10
+#define XMSTATE_UNS_HDR 0x20
+#define XMSTATE_UNS_DATA 0x40
+#define XMSTATE_SOL_HDR 0x80
+#define XMSTATE_SOL_DATA 0x100
+#define XMSTATE_W_PAD 0x200
+#define XMSTATE_W_RESEND_PAD 0x400
+#define XMSTATE_W_RESEND_DATA_DIGEST 0x800
-#define ISCSI_CONN_RCVBUF_MIN 262144
-#define ISCSI_CONN_SNDBUF_MIN 262144
#define ISCSI_PAD_LEN 4
-#define ISCSI_R2T_MAX 16
#define ISCSI_SG_TABLESIZE SG_ALL
#define ISCSI_TCP_MAX_CMD_LEN 16
@@ -85,9 +83,6 @@
/* iSCSI connection-wide sequencing */
int hdr_size; /* PDU header size */
- struct crypto_hash *rx_tfm; /* CRC32C (Rx) */
- struct hash_desc data_rx_hash; /* CRC32C (Rx) for data */
-
/* control data */
struct iscsi_tcp_recv in; /* TCP receive context */
int in_progress; /* connection state machine */
@@ -97,9 +92,9 @@
void (*old_state_change)(struct sock *);
void (*old_write_space)(struct sock *);
- /* xmit */
- struct crypto_hash *tx_tfm; /* CRC32C (Tx) */
- struct hash_desc data_tx_hash; /* CRC32C (Tx) for data */
+ /* data and header digests */
+ struct hash_desc tx_hash; /* CRC32C (Tx) */
+ struct hash_desc rx_hash; /* CRC32C (Rx) */
/* MIB custom statistics */
uint32_t sendpage_failures_cnt;
@@ -158,19 +153,15 @@
struct scatterlist *bad_sg; /* assert statement */
int sg_count; /* SG's to process */
uint32_t exp_r2tsn;
- int r2t_data_count; /* R2T Data-Out bytes */
int data_offset;
struct iscsi_r2t_info *r2t; /* in progress R2T */
struct iscsi_queue r2tpool;
struct kfifo *r2tqueue;
struct iscsi_r2t_info **r2ts;
- uint32_t datadigest; /* for recover digest */
int digest_count;
uint32_t immdigest; /* for imm data */
struct iscsi_buf immbuf; /* for imm data digest */
- struct iscsi_data_task *dtask; /* data task in progress*/
struct iscsi_data_task unsol_dtask; /* unsol data task */
- int digest_offset; /* for partial buff digest */
};
#endif /* ISCSI_H */
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 29f5934..2c34af9 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -32,7 +32,6 @@
*
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 5884cd2..c542d0e 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -68,8 +68,7 @@
EXPORT_SYMBOL_GPL(iscsi_check_assign_cmdsn);
void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask,
- struct iscsi_data *hdr,
- int transport_data_cnt)
+ struct iscsi_data *hdr)
{
struct iscsi_conn *conn = ctask->conn;
@@ -82,14 +81,12 @@
hdr->itt = ctask->hdr->itt;
hdr->exp_statsn = cpu_to_be32(conn->exp_statsn);
-
- hdr->offset = cpu_to_be32(ctask->total_length -
- transport_data_cnt -
- ctask->unsol_count);
+ hdr->offset = cpu_to_be32(ctask->unsol_offset);
if (ctask->unsol_count > conn->max_xmit_dlength) {
hton24(hdr->dlength, conn->max_xmit_dlength);
ctask->data_count = conn->max_xmit_dlength;
+ ctask->unsol_offset += ctask->data_count;
hdr->flags = 0;
} else {
hton24(hdr->dlength, ctask->unsol_count);
@@ -125,6 +122,7 @@
memcpy(hdr->cdb, sc->cmnd, sc->cmd_len);
memset(&hdr->cdb[sc->cmd_len], 0, MAX_COMMAND_SIZE - sc->cmd_len);
+ ctask->data_count = 0;
if (sc->sc_data_direction == DMA_TO_DEVICE) {
hdr->flags |= ISCSI_FLAG_CMD_WRITE;
/*
@@ -143,6 +141,7 @@
*/
ctask->imm_count = 0;
ctask->unsol_count = 0;
+ ctask->unsol_offset = 0;
ctask->unsol_datasn = 0;
if (session->imm_data_en) {
@@ -156,9 +155,12 @@
} else
zero_data(ctask->hdr->dlength);
- if (!session->initial_r2t_en)
+ if (!session->initial_r2t_en) {
ctask->unsol_count = min(session->first_burst,
ctask->total_length) - ctask->imm_count;
+ ctask->unsol_offset = ctask->imm_count;
+ }
+
if (!ctask->unsol_count)
/* No unsolicit Data-Out's */
ctask->hdr->flags |= ISCSI_FLAG_CMD_FINAL;
@@ -177,25 +179,51 @@
/**
* iscsi_complete_command - return command back to scsi-ml
- * @session: iscsi session
* @ctask: iscsi cmd task
*
* Must be called with session lock.
* This function returns the scsi command to scsi-ml and returns
* the cmd task to the pool of available cmd tasks.
*/
-static void iscsi_complete_command(struct iscsi_session *session,
- struct iscsi_cmd_task *ctask)
+static void iscsi_complete_command(struct iscsi_cmd_task *ctask)
{
+ struct iscsi_session *session = ctask->conn->session;
struct scsi_cmnd *sc = ctask->sc;
ctask->state = ISCSI_TASK_COMPLETED;
ctask->sc = NULL;
+ /* SCSI eh reuses commands to verify us */
+ sc->SCp.ptr = NULL;
list_del_init(&ctask->running);
__kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*));
sc->scsi_done(sc);
}
+static void __iscsi_get_ctask(struct iscsi_cmd_task *ctask)
+{
+ atomic_inc(&ctask->refcount);
+}
+
+static void iscsi_get_ctask(struct iscsi_cmd_task *ctask)
+{
+ spin_lock_bh(&ctask->conn->session->lock);
+ __iscsi_get_ctask(ctask);
+ spin_unlock_bh(&ctask->conn->session->lock);
+}
+
+static void __iscsi_put_ctask(struct iscsi_cmd_task *ctask)
+{
+ if (atomic_dec_and_test(&ctask->refcount))
+ iscsi_complete_command(ctask);
+}
+
+static void iscsi_put_ctask(struct iscsi_cmd_task *ctask)
+{
+ spin_lock_bh(&ctask->conn->session->lock);
+ __iscsi_put_ctask(ctask);
+ spin_unlock_bh(&ctask->conn->session->lock);
+}
+
/**
* iscsi_cmd_rsp - SCSI Command Response processing
* @conn: iscsi connection
@@ -272,7 +300,7 @@
(long)sc, sc->result, ctask->itt);
conn->scsirsp_pdus_cnt++;
- iscsi_complete_command(conn->session, ctask);
+ __iscsi_put_ctask(ctask);
return rc;
}
@@ -295,6 +323,30 @@
wake_up(&conn->ehwait);
}
+static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
+ char *data, int datalen)
+{
+ struct iscsi_reject *reject = (struct iscsi_reject *)hdr;
+ struct iscsi_hdr rejected_pdu;
+ uint32_t itt;
+
+ conn->exp_statsn = be32_to_cpu(reject->statsn) + 1;
+
+ if (reject->reason == ISCSI_REASON_DATA_DIGEST_ERROR) {
+ if (ntoh24(reject->dlength) > datalen)
+ return ISCSI_ERR_PROTO;
+
+ if (ntoh24(reject->dlength) >= sizeof(struct iscsi_hdr)) {
+ memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
+ itt = rejected_pdu.itt & ISCSI_ITT_MASK;
+ printk(KERN_ERR "itt 0x%x had pdu (op 0x%x) rejected "
+ "due to DataDigest error.\n", itt,
+ rejected_pdu.opcode);
+ }
+ }
+ return 0;
+}
+
/**
* __iscsi_complete_pdu - complete pdu
* @conn: iscsi conn
@@ -336,7 +388,7 @@
BUG_ON((void*)ctask != ctask->sc->SCp.ptr);
if (hdr->flags & ISCSI_FLAG_DATA_STATUS) {
conn->scsirsp_pdus_cnt++;
- iscsi_complete_command(session, ctask);
+ __iscsi_put_ctask(ctask);
}
break;
case ISCSI_OP_R2T:
@@ -406,6 +458,11 @@
break;
}
} else if (itt == ISCSI_RESERVED_TAG) {
+ rc = iscsi_check_assign_cmdsn(session,
+ (struct iscsi_nopin*)hdr);
+ if (rc)
+ goto done;
+
switch(opcode) {
case ISCSI_OP_NOOP_IN:
if (datalen) {
@@ -413,11 +470,6 @@
break;
}
- rc = iscsi_check_assign_cmdsn(session,
- (struct iscsi_nopin*)hdr);
- if (rc)
- break;
-
if (hdr->ttt == ISCSI_RESERVED_TAG)
break;
@@ -425,7 +477,8 @@
rc = ISCSI_ERR_CONN_FAILED;
break;
case ISCSI_OP_REJECT:
- /* we need sth like iscsi_reject_rsp()*/
+ rc = iscsi_handle_reject(conn, hdr, data, datalen);
+ break;
case ISCSI_OP_ASYNC_EVENT:
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
/* we need sth like iscsi_async_event_rsp() */
@@ -561,7 +614,9 @@
BUG_ON(conn->ctask && conn->mtask);
if (conn->ctask) {
+ iscsi_get_ctask(conn->ctask);
rc = tt->xmit_cmd_task(conn, conn->ctask);
+ iscsi_put_ctask(conn->ctask);
if (rc)
goto again;
/* done with this in-progress ctask */
@@ -602,12 +657,19 @@
struct iscsi_cmd_task, running);
conn->ctask->state = ISCSI_TASK_RUNNING;
list_move_tail(conn->xmitqueue.next, &conn->run_list);
+ __iscsi_get_ctask(conn->ctask);
spin_unlock_bh(&conn->session->lock);
rc = tt->xmit_cmd_task(conn, conn->ctask);
if (rc)
goto again;
+
spin_lock_bh(&conn->session->lock);
+ __iscsi_put_ctask(conn->ctask);
+ if (rc) {
+ spin_unlock_bh(&conn->session->lock);
+ goto again;
+ }
}
spin_unlock_bh(&conn->session->lock);
/* done with this ctask */
@@ -657,6 +719,7 @@
FAILURE_SESSION_FAILED,
FAILURE_SESSION_FREED,
FAILURE_WINDOW_CLOSED,
+ FAILURE_OOM,
FAILURE_SESSION_TERMINATE,
FAILURE_SESSION_IN_RECOVERY,
FAILURE_SESSION_RECOVERY_TIMEOUT,
@@ -672,6 +735,7 @@
sc->scsi_done = done;
sc->result = 0;
+ sc->SCp.ptr = NULL;
host = sc->device->host;
session = iscsi_hostdata(host->hostdata);
@@ -715,10 +779,15 @@
conn = session->leadconn;
- __kfifo_get(session->cmdpool.queue, (void*)&ctask, sizeof(void*));
+ if (!__kfifo_get(session->cmdpool.queue, (void*)&ctask,
+ sizeof(void*))) {
+ reason = FAILURE_OOM;
+ goto reject;
+ }
sc->SCp.phase = session->age;
sc->SCp.ptr = (char *)ctask;
+ atomic_set(&ctask->refcount, 1);
ctask->state = ISCSI_TASK_PENDING;
ctask->mtask = NULL;
ctask->conn = conn;
@@ -731,9 +800,10 @@
list_add_tail(&ctask->running, &conn->xmitqueue);
debug_scsi(
- "ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n",
+ "ctask enq [%s cid %d sc %p cdb 0x%x itt 0x%x len %d cmdsn %d "
+ "win %d]\n",
sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read",
- conn->id, (long)sc, ctask->itt, sc->request_bufflen,
+ conn->id, sc, sc->cmnd[0], ctask->itt, sc->request_bufflen,
session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1);
spin_unlock(&session->lock);
@@ -1061,16 +1131,30 @@
sc->result = err;
sc->resid = sc->request_bufflen;
- iscsi_complete_command(conn->session, ctask);
+ /* release ref from queuecommand */
+ __iscsi_put_ctask(ctask);
}
int iscsi_eh_abort(struct scsi_cmnd *sc)
{
- struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
- struct iscsi_conn *conn = ctask->conn;
- struct iscsi_session *session = conn->session;
+ struct iscsi_cmd_task *ctask;
+ struct iscsi_conn *conn;
+ struct iscsi_session *session;
int rc;
+ /*
+ * if session was ISCSI_STATE_IN_RECOVERY then we may not have
+ * got the command.
+ */
+ if (!sc->SCp.ptr) {
+ debug_scsi("sc never reached iscsi layer or it completed.\n");
+ return SUCCESS;
+ }
+
+ ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
+ conn = ctask->conn;
+ session = conn->session;
+
conn->eh_abort_cnt++;
debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt);
@@ -1520,11 +1604,19 @@
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
- if (session == NULL) {
+ if (!session) {
printk(KERN_ERR "iscsi: can't start unbound connection\n");
return -EPERM;
}
+ if ((session->imm_data_en || !session->initial_r2t_en) &&
+ session->first_burst > session->max_burst) {
+ printk("iscsi: invalid burst lengths: "
+ "first_burst %d max_burst %d\n",
+ session->first_burst, session->max_burst);
+ return -EINVAL;
+ }
+
spin_lock_bh(&session->lock);
conn->c_stage = ISCSI_CONN_STARTED;
session->state = ISCSI_STATE_LOGGED_IN;
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
new file mode 100644
index 0000000..aafdc92f
--- /dev/null
+++ b/drivers/scsi/libsas/Kconfig
@@ -0,0 +1,39 @@
+#
+# Kernel configuration file for the SAS Class
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+
+config SCSI_SAS_LIBSAS
+ tristate "SAS Domain Transport Attributes"
+ depends on SCSI
+ select SCSI_SAS_ATTRS
+ help
+ This provides transport specific helpers for SAS drivers which
+ use the domain device construct (like the aic94xxx).
+
+config SCSI_SAS_LIBSAS_DEBUG
+ bool "Compile the SAS Domain Transport Attributes in debug mode"
+ default y
+ depends on SCSI_SAS_LIBSAS
+ help
+ Compiles the SAS Layer in debug mode. In debug mode, the
+ SAS Layer prints diagnostic and debug messages.
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
new file mode 100644
index 0000000..44d972a
--- /dev/null
+++ b/drivers/scsi/libsas/Makefile
@@ -0,0 +1,36 @@
+#
+# Kernel Makefile for the libsas helpers
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
+ EXTRA_CFLAGS += -DSAS_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
+libsas-y += sas_init.o \
+ sas_phy.o \
+ sas_port.o \
+ sas_event.o \
+ sas_dump.o \
+ sas_discover.o \
+ sas_expander.o \
+ sas_scsi_host.o
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
new file mode 100644
index 0000000..d977bd4
--- /dev/null
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -0,0 +1,749 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+void sas_init_dev(struct domain_device *dev)
+{
+ INIT_LIST_HEAD(&dev->siblings);
+ INIT_LIST_HEAD(&dev->dev_list_node);
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ INIT_LIST_HEAD(&dev->ex_dev.children);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ case SATA_PM_PORT:
+ INIT_LIST_HEAD(&dev->sata_dev.children);
+ break;
+ default:
+ break;
+ }
+}
+
+static void sas_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct scatterlist *scatter = NULL;
+ struct task_status_struct *ts = &task->task_status;
+ int num_scatter = 0;
+ int retries = 0;
+ struct sas_internal *i =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+ if (pci_dma_dir != PCI_DMA_NONE) {
+ scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
+ if (!scatter)
+ goto out;
+
+ sg_init_one(scatter, buffer, size);
+ num_scatter = 1;
+ }
+
+ task->task_proto = task->dev->tproto;
+ task->scatter = scatter;
+ task->num_scatter = num_scatter;
+ task->total_xfer_len = size;
+ task->data_dir = pci_dma_dir;
+ task->task_done = sas_disc_task_done;
+
+ for (retries = 0; retries < 5; retries++) {
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_completion(&task->completion);
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = sas_task_timedout;
+ task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+ res);
+ goto ex_err;
+ }
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ int res2;
+ SAS_DPRINTK("task aborted, flags:0x%x\n",
+ task->task_state_flags);
+ res2 = i->dft->lldd_abort_task(task);
+ SAS_DPRINTK("came back from abort task\n");
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ if (res2 == TMF_RESP_FUNC_COMPLETE)
+ continue; /* Retry the task */
+ else
+ goto ex_err;
+ }
+ }
+ if (task->task_status.stat == SAM_BUSY ||
+ task->task_status.stat == SAM_TASK_SET_FULL ||
+ task->task_status.stat == SAS_QUEUE_FULL) {
+ SAS_DPRINTK("task: q busy, sleeping...\n");
+ schedule_timeout_interruptible(HZ);
+ } else if (task->task_status.stat == SAM_CHECK_COND) {
+ struct scsi_sense_hdr shdr;
+
+ if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+ &shdr)) {
+ SAS_DPRINTK("couldn't normalize sense\n");
+ continue;
+ }
+ if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+ (shdr.sense_key == 2 && shdr.asc == 4 &&
+ shdr.ascq == 1)) {
+ SAS_DPRINTK("device %016llx LUN: %016llx "
+ "powering up or not ready yet, "
+ "sleeping...\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN));
+
+ schedule_timeout_interruptible(5*HZ);
+ } else if (shdr.sense_key == 1) {
+ res = 0;
+ break;
+ } else if (shdr.sense_key == 5) {
+ break;
+ } else {
+ SAS_DPRINTK("dev %016llx LUN: %016llx "
+ "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+ "\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN),
+ shdr.sense_key,
+ shdr.asc, shdr.ascq);
+ }
+ } else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+ task->task_status.stat != SAM_GOOD) {
+ SAS_DPRINTK("task finished with resp:0x%x, "
+ "stat:0x%x\n",
+ task->task_status.resp,
+ task->task_status.stat);
+ goto ex_err;
+ } else {
+ res = 0;
+ break;
+ }
+ }
+ex_err:
+ if (pci_dma_dir != PCI_DMA_NONE)
+ kfree(scatter);
+out:
+ return res;
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device -- Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent. This is
+ * how we know they are (domain) "root" devices. All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct asd_sas_port *port)
+{
+ unsigned long flags;
+ struct asd_sas_phy *phy;
+ struct sas_rphy *rphy;
+ struct domain_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ if (list_empty(&port->phy_list)) {
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+ kfree(dev);
+ return -ENODEV;
+ }
+ phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el);
+ spin_lock(&phy->frame_rcvd_lock);
+ memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+ (size_t)phy->frame_rcvd_size));
+ spin_unlock(&phy->frame_rcvd_lock);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+
+ if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+ if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+ fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+ && (fis->device & ~0x10) == 0)
+ dev->dev_type = SATA_PM;
+ else
+ dev->dev_type = SATA_DEV;
+ dev->tproto = SATA_PROTO;
+ } else {
+ struct sas_identify_frame *id =
+ (struct sas_identify_frame *) dev->frame_rcvd;
+ dev->dev_type = id->dev_type;
+ dev->iproto = id->initiator_bits;
+ dev->tproto = id->target_bits;
+ }
+
+ sas_init_dev(dev);
+
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ rphy = sas_end_device_alloc(port->port);
+ break;
+ case EDGE_DEV:
+ rphy = sas_expander_alloc(port->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case FANOUT_DEV:
+ rphy = sas_expander_alloc(port->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ case SATA_DEV:
+ default:
+ printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+ rphy = NULL;
+ break;
+ }
+
+ if (!rphy) {
+ kfree(dev);
+ return -ENODEV;
+ }
+ rphy->identify.phy_identifier = phy->phy->identify.phy_identifier;
+ memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_fill_in_rphy(dev, rphy);
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ port->port_dev = dev;
+ dev->port = port;
+ dev->linkrate = port->linkrate;
+ dev->min_linkrate = port->linkrate;
+ dev->max_linkrate = port->linkrate;
+ dev->pathways = port->num_phys;
+ memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+ port->disc.max_level = 0;
+
+ dev->rphy = rphy;
+ spin_lock(&port->dev_list_lock);
+ list_add_tail(&dev->dev_list_node, &port->dev_list);
+ spin_unlock(&port->dev_list_lock);
+
+ return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+/* ---------- SATA ---------- */
+
+static void sas_get_ata_command_set(struct domain_device *dev)
+{
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+
+ if ((fis->sector_count == 1 && /* ATA */
+ fis->lbal == 1 &&
+ fis->lbam == 0 &&
+ fis->lbah == 0 &&
+ fis->device == 0)
+ ||
+ (fis->sector_count == 0 && /* CE-ATA (mATA) */
+ fis->lbal == 0 &&
+ fis->lbam == 0xCE &&
+ fis->lbah == 0xAA &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+ else if ((fis->interrupt_reason == 1 && /* ATAPI */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x14 &&
+ fis->byte_count_high == 0xEB &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+ else if ((fis->sector_count == 1 && /* SEMB */
+ fis->lbal == 1 &&
+ fis->lbam == 0x3C &&
+ fis->lbah == 0xC3 &&
+ fis->device == 0)
+ ||
+ (fis->interrupt_reason == 1 && /* SATA PM */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x69 &&
+ fis->byte_count_high == 0x96 &&
+ (fis->device & ~0x10) == 0))
+
+ /* Treat it as a superset? */
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+ u8 features, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct sas_task *task;
+ struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+ &dev->frame_rcvd[0];
+
+ res = -ENOMEM;
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ goto out;
+
+ task->dev = dev;
+
+ task->ata_task.fis.command = command;
+ task->ata_task.fis.features = features;
+ task->ata_task.fis.device = d2h_fis->device;
+ task->ata_task.retry_count = 1;
+
+ res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+ sas_free_task(task);
+out:
+ return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+ unsigned long flags;
+ struct asd_sas_port *port = dev->port;
+ struct asd_sas_phy *phy;
+
+ BUG_ON(dev->parent);
+
+ memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ list_for_each_entry(phy, &port->phy_list, port_phy_el)
+ memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV 0xEC
+#define ATA_IDENTIFY_PACKET_DEV 0xA1
+#define ATA_SET_FEATURES 0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+ int res;
+ __le16 *identify_x;
+ u8 command;
+
+ identify_x = kzalloc(512, GFP_KERNEL);
+ if (!identify_x)
+ return -ENOMEM;
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+ dev->sata_dev.identify_device = identify_x;
+ command = ATA_IDENTIFY_DEV;
+ } else {
+ dev->sata_dev.identify_packet_device = identify_x;
+ command = ATA_IDENTIFY_PACKET_DEV;
+ }
+
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+
+ /* lives on the media? */
+ if (le16_to_cpu(identify_x[0]) & 4) {
+ /* incomplete response */
+ SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+ "dev %llx\n", SAS_ADDR(dev->sas_addr));
+ if (!le16_to_cpu(identify_x[83] & (1<<6)))
+ goto cont1;
+ res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+ ATA_FEATURE_PUP_STBY_SPIN_UP,
+ NULL, 0, PCI_DMA_NONE);
+ if (res)
+ goto cont1;
+
+ schedule_timeout_interruptible(5*HZ); /* More time? */
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+ }
+cont1:
+ /* Get WWN */
+ if (dev->port->oob_mode != SATA_OOB_MODE) {
+ memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+ (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+ == 0x5000) {
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ dev->sas_addr[2*i] =
+ (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+ dev->sas_addr[2*i+1] =
+ le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+ }
+ }
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ if (!dev->parent)
+ sas_sata_propagate_sas_addr(dev);
+
+ /* XXX Hint: register this SATA device with SATL.
+ When this returns, dev->sata_dev->lu is alive and
+ present.
+ sas_satl_register_dev(dev);
+ */
+ return 0;
+out_err:
+ dev->sata_dev.identify_packet_device = NULL;
+ dev->sata_dev.identify_device = NULL;
+ kfree(identify_x);
+ return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+ return -ENODEV;
+}
+
+int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (i->dft->lldd_dev_found) {
+ res = i->dft->lldd_dev_found(dev);
+ if (res) {
+ printk("sas: driver on pcidev %s cannot handle "
+ "device %llx, error:%d\n",
+ pci_name(sas_ha->pcidev),
+ SAS_ADDR(dev->sas_addr), res);
+ }
+ }
+ return res;
+}
+
+
+void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (i->dft->lldd_dev_gone)
+ i->dft->lldd_dev_gone(dev);
+}
+
+/* ---------- Common/dispatchers ---------- */
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it. Then depending on the type of device we call the appropriate
+ * discover functions. Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it. That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time. Devices directly attached to a HA
+ * port, have no parents. All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+ int res;
+
+ sas_get_ata_command_set(dev);
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ switch (dev->dev_type) {
+ case SATA_DEV:
+ res = sas_discover_sata_dev(dev);
+ break;
+ case SATA_PM:
+ res = sas_discover_sata_pm(dev);
+ break;
+ default:
+ break;
+ }
+
+ sas_notify_lldd_dev_gone(dev);
+ if (!res) {
+ sas_notify_lldd_dev_found(dev);
+ }
+ return res;
+}
+
+/**
+ * sas_discover_end_dev -- discover an end device (SSP, etc)
+ * @end: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_rphy_add(dev->rphy);
+ if (res)
+ goto out_err;
+
+ /* do this to get the end device port attributes which will have
+ * been scanned in sas_rphy_add */
+ sas_notify_lldd_dev_gone(dev);
+ sas_notify_lldd_dev_found(dev);
+
+ return 0;
+
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+static inline void sas_unregister_common_dev(struct domain_device *dev)
+{
+ sas_notify_lldd_dev_gone(dev);
+ if (!dev->parent)
+ dev->port->port_dev = NULL;
+ else
+ list_del_init(&dev->siblings);
+ list_del_init(&dev->dev_list_node);
+}
+
+void sas_unregister_dev(struct domain_device *dev)
+{
+ if (dev->rphy) {
+ sas_remove_children(&dev->rphy->dev);
+ sas_rphy_delete(dev->rphy);
+ dev->rphy = NULL;
+ }
+ if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+ /* remove the phys and ports, everything else should be gone */
+ kfree(dev->ex_dev.ex_phy);
+ dev->ex_dev.ex_phy = NULL;
+ }
+ sas_unregister_common_dev(dev);
+}
+
+void sas_unregister_domain_devices(struct asd_sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
+ sas_unregister_dev(dev);
+
+ port->port->rphy = NULL;
+
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain -- discover the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static void sas_discover_domain(void *data)
+{
+ int error = 0;
+ struct asd_sas_port *port = data;
+
+ sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock,
+ &port->disc.pending);
+
+ if (port->port_dev)
+ return ;
+ else {
+ error = sas_get_port_device(port);
+ if (error)
+ return;
+ }
+
+ SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+ current->pid);
+
+ switch (port->port_dev->dev_type) {
+ case SAS_END_DEV:
+ error = sas_discover_end_dev(port->port_dev);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ error = sas_discover_root_expander(port->port_dev);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ error = sas_discover_sata(port->port_dev);
+ break;
+ default:
+ SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+ break;
+ }
+
+ if (error) {
+ kfree(port->port_dev); /* not kobject_register-ed yet */
+ port->port_dev = NULL;
+ }
+
+ SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+ current->pid, error);
+}
+
+static void sas_revalidate_domain(void *data)
+{
+ int res = 0;
+ struct asd_sas_port *port = data;
+
+ sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock,
+ &port->disc.pending);
+
+ SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+ current->pid);
+ if (port->port_dev)
+ res = sas_ex_revalidate_domain(port->port_dev);
+
+ SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+ port->id, current->pid, res);
+}
+
+/* ---------- Events ---------- */
+
+int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
+{
+ struct sas_discovery *disc;
+
+ if (!port)
+ return 0;
+ disc = &port->disc;
+
+ BUG_ON(ev >= DISC_NUM_EVENTS);
+
+ sas_queue_event(ev, &disc->disc_event_lock, &disc->pending,
+ &disc->disc_work[ev], port->ha->core.shost);
+
+ return 0;
+}
+
+/**
+ * sas_init_disc -- initialize the discovery struct in the port
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
+{
+ int i;
+
+ static void (*sas_event_fns[DISC_NUM_EVENTS])(void *) = {
+ [DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
+ [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
+ };
+
+ spin_lock_init(&disc->disc_event_lock);
+ disc->pending = 0;
+ for (i = 0; i < DISC_NUM_EVENTS; i++)
+ INIT_WORK(&disc->disc_work[i], sas_event_fns[i], port);
+}
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
new file mode 100644
index 0000000..f1246d2
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -0,0 +1,76 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_dump.h"
+
+#ifdef SAS_DEBUG
+
+static const char *sas_hae_str[] = {
+ [0] = "HAE_RESET",
+};
+
+static const char *sas_porte_str[] = {
+ [0] = "PORTE_BYTES_DMAED",
+ [1] = "PORTE_BROADCAST_RCVD",
+ [2] = "PORTE_LINK_RESET_ERR",
+ [3] = "PORTE_TIMER_EVENT",
+ [4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+ [0] = "PHYE_LOSS_OF_SIGNAL",
+ [1] = "PHYE_OOB_DONE",
+ [2] = "PHYE_OOB_ERROR",
+ [3] = "PHYE_SPINUP_HOLD",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+ SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+ SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
+{
+ SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
+ sas_hae_str[he]);
+}
+
+void sas_dump_port(struct asd_sas_port *port)
+{
+ SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+ SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->sas_addr));
+ SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->attached_sas_addr));
+ SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+ SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+ SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+ SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
new file mode 100644
index 0000000..47b45d4
--- /dev/null
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -0,0 +1,42 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#ifdef SAS_DEBUG
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
+void sas_dump_port(struct asd_sas_port *port);
+
+#else /* SAS_DEBUG */
+
+static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
+static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
+static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
+ enum ha_event he) { }
+static inline void sas_dump_port(struct asd_sas_port *port) { }
+
+#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
new file mode 100644
index 0000000..19110ed
--- /dev/null
+++ b/drivers/scsi/libsas/sas_event.c
@@ -0,0 +1,75 @@
+/*
+ * Serial Attached SCSI (SAS) Event processing
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <scsi/scsi_host.h>
+#include "sas_internal.h"
+#include "sas_dump.h"
+
+static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
+{
+ BUG_ON(event >= HA_NUM_EVENTS);
+
+ sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending,
+ &sas_ha->ha_events[event], sas_ha->core.shost);
+}
+
+static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+{
+ struct sas_ha_struct *ha = phy->ha;
+
+ BUG_ON(event >= PORT_NUM_EVENTS);
+
+ sas_queue_event(event, &ha->event_lock, &phy->port_events_pending,
+ &phy->port_events[event], ha->core.shost);
+}
+
+static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+{
+ struct sas_ha_struct *ha = phy->ha;
+
+ BUG_ON(event >= PHY_NUM_EVENTS);
+
+ sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending,
+ &phy->phy_events[event], ha->core.shost);
+}
+
+int sas_init_events(struct sas_ha_struct *sas_ha)
+{
+ static void (*sas_ha_event_fns[HA_NUM_EVENTS])(void *) = {
+ [HAE_RESET] = sas_hae_reset,
+ };
+
+ int i;
+
+ spin_lock_init(&sas_ha->event_lock);
+
+ for (i = 0; i < HA_NUM_EVENTS; i++)
+ INIT_WORK(&sas_ha->ha_events[i], sas_ha_event_fns[i], sas_ha);
+
+ sas_ha->notify_ha_event = notify_ha_event;
+ sas_ha->notify_port_event = notify_port_event;
+ sas_ha->notify_phy_event = notify_phy_event;
+
+ return 0;
+}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
new file mode 100644
index 0000000..30b8014
--- /dev/null
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -0,0 +1,1855 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static int sas_discover_expander(struct domain_device *dev);
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include);
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr);
+
+#if 0
+/* FIXME: smp needs to migrate into the sas class */
+static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+#endif
+
+/* ---------- SMP task management ---------- */
+
+static void smp_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void smp_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+/* Give it some long enough timeout. In seconds. */
+#define SMP_TIMEOUT 10
+
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+ void *resp, int resp_size)
+{
+ int res;
+ struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ sg_init_one(&task->smp_task.smp_req, req, req_size);
+ sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+ task->task_done = smp_task_done;
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = smp_task_timedout;
+ task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SMP task failed:%d\n", res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ SAS_DPRINTK("smp task timed out or aborted\n");
+ i->dft->lldd_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ SAS_DPRINTK("SMP task aborted and not done\n");
+ goto ex_err;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD)
+ res = 0;
+ else
+ SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ex_err:
+ sas_free_task(task);
+ return res;
+}
+
+/* ---------- Allocations ---------- */
+
+static inline void *alloc_smp_req(int size)
+{
+ u8 *p = kzalloc(size, GFP_KERNEL);
+ if (p)
+ p[0] = SMP_REQUEST;
+ return p;
+}
+
+static inline void *alloc_smp_resp(int size)
+{
+ return kzalloc(size, GFP_KERNEL);
+}
+
+/* ---------- Expander configuration ---------- */
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
+ void *disc_resp)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ struct smp_resp *resp = disc_resp;
+ struct discover_resp *dr = &resp->disc;
+ struct sas_rphy *rphy = dev->rphy;
+ int rediscover = (phy->phy != NULL);
+
+ if (!rediscover) {
+ phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
+
+ /* FIXME: error_handling */
+ BUG_ON(!phy->phy);
+ }
+
+ switch (resp->result) {
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ return;
+ default:
+ phy->phy_state = PHY_NOT_PRESENT;
+ return;
+ case SMP_RESP_FUNC_ACC:
+ phy->phy_state = PHY_EMPTY; /* do not know yet */
+ break;
+ }
+
+ phy->phy_id = phy_id;
+ phy->attached_dev_type = dr->attached_dev_type;
+ phy->linkrate = dr->linkrate;
+ phy->attached_sata_host = dr->attached_sata_host;
+ phy->attached_sata_dev = dr->attached_sata_dev;
+ phy->attached_sata_ps = dr->attached_sata_ps;
+ phy->attached_iproto = dr->iproto << 1;
+ phy->attached_tproto = dr->tproto << 1;
+ memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+ phy->attached_phy_id = dr->attached_phy_id;
+ phy->phy_change_count = dr->change_count;
+ phy->routing_attr = dr->routing_attr;
+ phy->virtual = dr->virtual;
+ phy->last_da_index = -1;
+
+ phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
+ phy->phy->identify.target_port_protocols = phy->attached_tproto;
+ phy->phy->identify.phy_identifier = phy_id;
+ phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
+ phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
+ phy->phy->minimum_linkrate = dr->pmin_linkrate;
+ phy->phy->maximum_linkrate = dr->pmax_linkrate;
+ phy->phy->negotiated_linkrate = phy->linkrate;
+
+ if (!rediscover)
+ sas_phy_add(phy->phy);
+
+ SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+ SAS_ADDR(dev->sas_addr), phy->phy_id,
+ phy->routing_attr == TABLE_ROUTING ? 'T' :
+ phy->routing_attr == DIRECT_ROUTING ? 'D' :
+ phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
+ SAS_ADDR(phy->attached_sas_addr));
+
+ return;
+}
+
+#define DISCOVER_REQ_SIZE 16
+#define DISCOVER_RESP_SIZE 56
+
+static int sas_ex_phy_discover(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ u8 *disc_req;
+ u8 *disc_resp;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
+ if (!disc_resp) {
+ kfree(disc_req);
+ return -ENOMEM;
+ }
+
+ disc_req[1] = SMP_DISCOVER;
+
+ if (0 <= single && single < ex->num_phys) {
+ disc_req[9] = single;
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ goto out_err;
+ sas_set_ex_phy(dev, single, disc_resp);
+ } else {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ disc_req[9] = i;
+ res = smp_execute_task(dev, disc_req,
+ DISCOVER_REQ_SIZE, disc_resp,
+ DISCOVER_RESP_SIZE);
+ if (res)
+ goto out_err;
+ sas_set_ex_phy(dev, i, disc_resp);
+ }
+ }
+out_err:
+ kfree(disc_resp);
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_expander_discover(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = -ENOMEM;
+
+ ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
+ if (!ex->ex_phy)
+ return -ENOMEM;
+
+ res = sas_ex_phy_discover(dev, -1);
+ if (res)
+ goto out_err;
+
+ return 0;
+ out_err:
+ kfree(ex->ex_phy);
+ ex->ex_phy = NULL;
+ return res;
+}
+
+#define MAX_EXPANDER_PHYS 128
+
+static void ex_assign_report_general(struct domain_device *dev,
+ struct smp_resp *resp)
+{
+ struct report_general_resp *rg = &resp->rg;
+
+ dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
+ dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
+ dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.conf_route_table = rg->conf_route_table;
+ dev->ex_dev.configuring = rg->configuring;
+ memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
+}
+
+#define RG_REQ_SIZE 8
+#define RG_RESP_SIZE 32
+
+static int sas_ex_general(struct domain_device *dev)
+{
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+ int res;
+ int i;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ for (i = 0; i < 5; i++) {
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+
+ if (res) {
+ SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), rg_resp->result);
+ res = rg_resp->result;
+ goto out;
+ }
+
+ ex_assign_report_general(dev, rg_resp);
+
+ if (dev->ex_dev.configuring) {
+ SAS_DPRINTK("RG: ex %llx self-configuring...\n",
+ SAS_ADDR(dev->sas_addr));
+ schedule_timeout_interruptible(5*HZ);
+ } else
+ break;
+ }
+out:
+ kfree(rg_req);
+ kfree(rg_resp);
+ return res;
+}
+
+static void ex_assign_manuf_info(struct domain_device *dev, void
+ *_mi_resp)
+{
+ u8 *mi_resp = _mi_resp;
+ struct sas_rphy *rphy = dev->rphy;
+ struct sas_expander_device *edev = rphy_to_expander_device(rphy);
+
+ memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
+ memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
+ memcpy(edev->product_rev, mi_resp + 36,
+ SAS_EXPANDER_PRODUCT_REV_LEN);
+
+ if (mi_resp[8] & 1) {
+ memcpy(edev->component_vendor_id, mi_resp + 40,
+ SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+ edev->component_id = mi_resp[48] << 8 | mi_resp[49];
+ edev->component_revision_id = mi_resp[50];
+ }
+}
+
+#define MI_REQ_SIZE 8
+#define MI_RESP_SIZE 64
+
+static int sas_ex_manuf_info(struct domain_device *dev)
+{
+ u8 *mi_req;
+ u8 *mi_resp;
+ int res;
+
+ mi_req = alloc_smp_req(MI_REQ_SIZE);
+ if (!mi_req)
+ return -ENOMEM;
+
+ mi_resp = alloc_smp_resp(MI_RESP_SIZE);
+ if (!mi_resp) {
+ kfree(mi_req);
+ return -ENOMEM;
+ }
+
+ mi_req[1] = SMP_REPORT_MANUF_INFO;
+
+ res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
+ if (res) {
+ SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), mi_resp[2]);
+ goto out;
+ }
+
+ ex_assign_manuf_info(dev, mi_resp);
+out:
+ kfree(mi_req);
+ kfree(mi_resp);
+ return res;
+}
+
+#define PC_REQ_SIZE 44
+#define PC_RESP_SIZE 8
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func,
+ struct sas_phy_linkrates *rates)
+{
+ u8 *pc_req;
+ u8 *pc_resp;
+ int res;
+
+ pc_req = alloc_smp_req(PC_REQ_SIZE);
+ if (!pc_req)
+ return -ENOMEM;
+
+ pc_resp = alloc_smp_resp(PC_RESP_SIZE);
+ if (!pc_resp) {
+ kfree(pc_req);
+ return -ENOMEM;
+ }
+
+ pc_req[1] = SMP_PHY_CONTROL;
+ pc_req[9] = phy_id;
+ pc_req[10]= phy_func;
+ if (rates) {
+ pc_req[32] = rates->minimum_linkrate << 4;
+ pc_req[33] = rates->maximum_linkrate << 4;
+ }
+
+ res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
+
+ kfree(pc_resp);
+ kfree(pc_req);
+ return res;
+}
+
+static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+ sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
+ phy->linkrate = SAS_PHY_DISABLED;
+}
+
+static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
+ sas_ex_disable_phy(dev, i);
+ }
+}
+
+static int sas_dev_present_in_domain(struct asd_sas_port *port,
+ u8 *sas_addr)
+{
+ struct domain_device *dev;
+
+ if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ }
+ return 0;
+}
+
+#define RPEL_REQ_SIZE 16
+#define RPEL_RESP_SIZE 32
+int sas_smp_get_phy_events(struct sas_phy *phy)
+{
+ int res;
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *dev = sas_find_dev_by_rphy(rphy);
+ u8 *req = alloc_smp_req(RPEL_REQ_SIZE);
+ u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL);
+
+ if (!resp)
+ return -ENOMEM;
+
+ req[1] = SMP_REPORT_PHY_ERR_LOG;
+ req[9] = phy->number;
+
+ res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
+ resp, RPEL_RESP_SIZE);
+
+ if (!res)
+ goto out;
+
+ phy->invalid_dword_count = scsi_to_u32(&resp[12]);
+ phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
+ phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
+ phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+
+ out:
+ kfree(resp);
+ return res;
+
+}
+
+#define RPS_REQ_SIZE 16
+#define RPS_RESP_SIZE 60
+
+static int sas_get_report_phy_sata(struct domain_device *dev,
+ int phy_id,
+ struct smp_resp *rps_resp)
+{
+ int res;
+ u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+
+ if (!rps_req)
+ return -ENOMEM;
+
+ rps_req[1] = SMP_REPORT_PHY_SATA;
+ rps_req[9] = phy_id;
+
+ res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
+ rps_resp, RPS_RESP_SIZE);
+
+ kfree(rps_req);
+ return 0;
+}
+
+static void sas_ex_get_linkrate(struct domain_device *parent,
+ struct domain_device *child,
+ struct ex_phy *parent_phy)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct sas_port *port;
+ int i;
+
+ child->pathways = 0;
+
+ port = parent_phy->port;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *phy = &parent_ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr)) {
+
+ child->min_linkrate = min(parent->min_linkrate,
+ phy->linkrate);
+ child->max_linkrate = max(parent->max_linkrate,
+ phy->linkrate);
+ child->pathways++;
+ sas_port_add_phy(port, phy->phy);
+ }
+ }
+ child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
+ child->pathways = min(child->pathways, parent->pathways);
+}
+
+static struct domain_device *sas_ex_discover_end_dev(
+ struct domain_device *parent, int phy_id)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ int res;
+
+ if (phy->attached_sata_host || phy->attached_sata_ps)
+ return NULL;
+
+ child = kzalloc(sizeof(*child), GFP_KERNEL);
+ if (!child)
+ return NULL;
+
+ child->parent = parent;
+ child->port = parent->port;
+ child->iproto = phy->attached_iproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ BUG_ON(!phy->port);
+ /* FIXME: better error handling*/
+ BUG_ON(sas_port_add(phy->port) != 0);
+ sas_ex_get_linkrate(parent, child, phy);
+
+ if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
+ child->dev_type = SATA_DEV;
+ if (phy->attached_tproto & SAS_PROTO_STP)
+ child->tproto = phy->attached_tproto;
+ if (phy->attached_sata_dev)
+ child->tproto |= SATA_DEV;
+ res = sas_get_report_phy_sata(parent, phy_id,
+ &child->sata_dev.rps_resp);
+ if (res) {
+ SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+ "0x%x\n", SAS_ADDR(parent->sas_addr),
+ phy_id, res);
+ kfree(child);
+ return NULL;
+ }
+ memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
+ sizeof(struct dev_to_host_fis));
+ sas_init_dev(child);
+ res = sas_discover_sata(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_sata() for device %16llx at "
+ "%016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ kfree(child);
+ return NULL;
+ }
+ } else if (phy->attached_tproto & SAS_PROTO_SSP) {
+ child->dev_type = SAS_END_DEV;
+ rphy = sas_end_device_alloc(phy->port);
+ /* FIXME: error handling */
+ BUG_ON(!rphy);
+ child->tproto = phy->attached_tproto;
+ sas_init_dev(child);
+
+ child->rphy = rphy;
+ sas_fill_in_rphy(child, rphy);
+
+ spin_lock(&parent->port->dev_list_lock);
+ list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+ spin_unlock(&parent->port->dev_list_lock);
+
+ res = sas_discover_end_dev(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
+ "at %016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ /* FIXME: this kfrees list elements without removing them */
+ //kfree(child);
+ return NULL;
+ }
+ } else {
+ SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
+ phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+ phy_id);
+ }
+
+ list_add_tail(&child->siblings, &parent_ex->children);
+ return child;
+}
+
+static struct domain_device *sas_ex_discover_expander(
+ struct domain_device *parent, int phy_id)
+{
+ struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
+ struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ struct sas_expander_device *edev;
+ struct asd_sas_port *port;
+ int res;
+
+ if (phy->routing_attr == DIRECT_ROUTING) {
+ SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+ "allowed\n",
+ SAS_ADDR(parent->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr),
+ phy->attached_phy_id);
+ return NULL;
+ }
+ child = kzalloc(sizeof(*child), GFP_KERNEL);
+ if (!child)
+ return NULL;
+
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ /* FIXME: better error handling */
+ BUG_ON(sas_port_add(phy->port) != 0);
+
+
+ switch (phy->attached_dev_type) {
+ case EDGE_DEV:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case FANOUT_DEV:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ default:
+ rphy = NULL; /* shut gcc up */
+ BUG();
+ }
+ port = parent->port;
+ child->rphy = rphy;
+ edev = rphy_to_expander_device(rphy);
+ child->dev_type = phy->attached_dev_type;
+ child->parent = parent;
+ child->port = port;
+ child->iproto = phy->attached_iproto;
+ child->tproto = phy->attached_tproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ sas_ex_get_linkrate(parent, child, phy);
+ edev->level = parent_ex->level + 1;
+ parent->port->disc.max_level = max(parent->port->disc.max_level,
+ edev->level);
+ sas_init_dev(child);
+ sas_fill_in_rphy(child, rphy);
+ sas_rphy_add(rphy);
+
+ spin_lock(&parent->port->dev_list_lock);
+ list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+ spin_unlock(&parent->port->dev_list_lock);
+
+ res = sas_discover_expander(child);
+ if (res) {
+ kfree(child);
+ return NULL;
+ }
+ list_add_tail(&child->siblings, &parent->ex_dev.children);
+ return child;
+}
+
+static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ int res = 0;
+
+ /* Phy state */
+ if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
+ if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ return res;
+ }
+
+ /* Parent and domain coherency */
+ if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->port->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ return 0;
+ }
+ if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->parent->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ if (ex_phy->routing_attr == TABLE_ROUTING)
+ sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
+ return 0;
+ }
+
+ if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
+ sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
+
+ if (ex_phy->attached_dev_type == NO_DEVICE) {
+ if (ex_phy->routing_attr == DIRECT_ROUTING) {
+ memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ }
+ return 0;
+ } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
+ return 0;
+
+ if (ex_phy->attached_dev_type != SAS_END_DEV &&
+ ex_phy->attached_dev_type != FANOUT_DEV &&
+ ex_phy->attached_dev_type != EDGE_DEV) {
+ SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
+ "phy 0x%x\n", ex_phy->attached_dev_type,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ return 0;
+ }
+
+ res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ if (res) {
+ SAS_DPRINTK("configure routing for dev %016llx "
+ "reported 0x%x. Forgotten\n",
+ SAS_ADDR(ex_phy->attached_sas_addr), res);
+ sas_disable_routing(dev, ex_phy->attached_sas_addr);
+ return res;
+ }
+
+ switch (ex_phy->attached_dev_type) {
+ case SAS_END_DEV:
+ child = sas_ex_discover_end_dev(dev, phy_id);
+ break;
+ case FANOUT_DEV:
+ if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
+ SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
+ "attached to ex %016llx phy 0x%x\n",
+ SAS_ADDR(ex_phy->attached_sas_addr),
+ ex_phy->attached_phy_id,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ sas_ex_disable_phy(dev, phy_id);
+ break;
+ } else
+ memcpy(dev->port->disc.fanout_sas_addr,
+ ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
+ /* fallthrough */
+ case EDGE_DEV:
+ child = sas_ex_discover_expander(dev, phy_id);
+ break;
+ default:
+ break;
+ }
+
+ if (child) {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ if (ex->ex_phy[i].phy_state == PHY_VACANT ||
+ ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr))
+ ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ }
+ }
+
+ return res;
+}
+
+static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == EDGE_DEV ||
+ phy->attached_dev_type == FANOUT_DEV) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
+
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int sas_check_level_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child;
+ u8 sub_addr[8] = {0, };
+
+ list_for_each_entry(child, &ex->children, siblings) {
+ if (child->dev_type != EDGE_DEV &&
+ child->dev_type != FANOUT_DEV)
+ continue;
+ if (sub_addr[0] == 0) {
+ sas_find_sub_addr(child, sub_addr);
+ continue;
+ } else {
+ u8 s2[8];
+
+ if (sas_find_sub_addr(child, s2) &&
+ (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
+
+ SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
+ "diverges from subtractive "
+ "boundary %016llx\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(s2),
+ SAS_ADDR(sub_addr));
+
+ sas_ex_disable_port(child, s2);
+ }
+ }
+ }
+ return 0;
+}
+/**
+ * sas_ex_discover_devices -- discover devices attached to this expander
+ * dev: pointer to the expander domain device
+ * single: if you want to do a single phy, else set to -1;
+ *
+ * Configure this expander for use with its devices and register the
+ * devices of this expander.
+ */
+static int sas_ex_discover_devices(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, end = ex->num_phys;
+ int res = 0;
+
+ if (0 <= single && single < end) {
+ i = single;
+ end = i+1;
+ }
+
+ for ( ; i < end; i++) {
+ struct ex_phy *ex_phy = &ex->ex_phy[i];
+
+ if (ex_phy->phy_state == PHY_VACANT ||
+ ex_phy->phy_state == PHY_NOT_PRESENT ||
+ ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
+ continue;
+
+ switch (ex_phy->linkrate) {
+ case SAS_PHY_DISABLED:
+ case SAS_PHY_RESET_PROBLEM:
+ case SAS_SATA_PORT_SELECTOR:
+ continue;
+ default:
+ res = sas_ex_discover_dev(dev, i);
+ if (res)
+ break;
+ continue;
+ }
+ }
+
+ if (!res)
+ sas_check_level_subtractive_boundary(dev);
+
+ return res;
+}
+
+static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+ u8 *sub_sas_addr = NULL;
+
+ if (dev->dev_type != EDGE_DEV)
+ return 0;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == FANOUT_DEV ||
+ phy->attached_dev_type == EDGE_DEV) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ if (!sub_sas_addr)
+ sub_sas_addr = &phy->attached_sas_addr[0];
+ else if (SAS_ADDR(sub_sas_addr) !=
+ SAS_ADDR(phy->attached_sas_addr)) {
+
+ SAS_DPRINTK("ex %016llx phy 0x%x "
+ "diverges(%016llx) on subtractive "
+ "boundary(%016llx). Disabled\n",
+ SAS_ADDR(dev->sas_addr), i,
+ SAS_ADDR(phy->attached_sas_addr),
+ SAS_ADDR(sub_sas_addr));
+ sas_ex_disable_phy(dev, i);
+ }
+ }
+ }
+ return 0;
+}
+
+static void sas_print_parent_topology_bug(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ static const char ra_char[] = {
+ [DIRECT_ROUTING] = 'D',
+ [SUBTRACTIVE_ROUTING] = 'S',
+ [TABLE_ROUTING] = 'T',
+ };
+ static const char *ex_type[] = {
+ [EDGE_DEV] = "edge",
+ [FANOUT_DEV] = "fanout",
+ };
+ struct domain_device *parent = child->parent;
+
+ sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
+ "has %c:%c routing link!\n",
+
+ ex_type[parent->dev_type],
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+
+ ex_type[child->dev_type],
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+
+ ra_char[parent_phy->routing_attr],
+ ra_char[child_phy->routing_attr]);
+}
+
+static int sas_check_eeds(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ int res = 0;
+ struct domain_device *parent = child->parent;
+
+ if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+ "phy S:0x%x, while there is a fanout ex %016llx\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+ SAS_ADDR(parent->port->disc.fanout_sas_addr));
+ } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
+ memcpy(parent->port->disc.eeds_a, parent->sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(parent->port->disc.eeds_b, child->sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(child->sas_addr)))
+ &&
+ ((SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(child->sas_addr))))
+ ;
+ else {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+ "phy 0x%x link forms a third EEDS!\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id);
+ }
+
+ return res;
+}
+
+/* Here we spill over 80 columns. It is intentional.
+ */
+static int sas_check_parent_topology(struct domain_device *child)
+{
+ struct expander_device *child_ex = &child->ex_dev;
+ struct expander_device *parent_ex;
+ int i;
+ int res = 0;
+
+ if (!child->parent)
+ return 0;
+
+ if (child->parent->dev_type != EDGE_DEV &&
+ child->parent->dev_type != FANOUT_DEV)
+ return 0;
+
+ parent_ex = &child->parent->ex_dev;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
+ struct ex_phy *child_phy;
+
+ if (parent_phy->phy_state == PHY_VACANT ||
+ parent_phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+ continue;
+
+ child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
+
+ switch (child->parent->dev_type) {
+ case EDGE_DEV:
+ if (child->dev_type == FANOUT_DEV) {
+ if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
+ child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ res = sas_check_eeds(child, parent_phy, child_phy);
+ } else if (child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == TABLE_ROUTING &&
+ child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ break;
+ case FANOUT_DEV:
+ if (parent_phy->routing_attr != TABLE_ROUTING ||
+ child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return res;
+}
+
+#define RRI_REQ_SIZE 16
+#define RRI_RESP_SIZE 44
+
+static int sas_configure_present(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int *index, int *present)
+{
+ int i, res = 0;
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ u8 *rri_req;
+ u8 *rri_resp;
+
+ *present = 0;
+ *index = 0;
+
+ rri_req = alloc_smp_req(RRI_REQ_SIZE);
+ if (!rri_req)
+ return -ENOMEM;
+
+ rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
+ if (!rri_resp) {
+ kfree(rri_req);
+ return -ENOMEM;
+ }
+
+ rri_req[1] = SMP_REPORT_ROUTE_INFO;
+ rri_req[9] = phy_id;
+
+ for (i = 0; i < ex->max_route_indexes ; i++) {
+ *(__be16 *)(rri_req+6) = cpu_to_be16(i);
+ res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
+ RRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = rri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx "
+ "phy 0x%x index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, i);
+ goto out;
+ } else if (res != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
+ "result 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr), phy_id, i, res);
+ goto out;
+ }
+ if (SAS_ADDR(sas_addr) != 0) {
+ if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
+ *index = i;
+ if ((rri_resp[12] & 0x80) == 0x80)
+ *present = 0;
+ else
+ *present = 1;
+ goto out;
+ } else if (SAS_ADDR(rri_resp+16) == 0) {
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ } else if (SAS_ADDR(rri_resp+16) == 0 &&
+ phy->last_da_index < i) {
+ phy->last_da_index = i;
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ }
+ res = -1;
+out:
+ kfree(rri_req);
+ kfree(rri_resp);
+ return res;
+}
+
+#define CRI_REQ_SIZE 44
+#define CRI_RESP_SIZE 8
+
+static int sas_configure_set(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int index, int include)
+{
+ int res;
+ u8 *cri_req;
+ u8 *cri_resp;
+
+ cri_req = alloc_smp_req(CRI_REQ_SIZE);
+ if (!cri_req)
+ return -ENOMEM;
+
+ cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
+ if (!cri_resp) {
+ kfree(cri_req);
+ return -ENOMEM;
+ }
+
+ cri_req[1] = SMP_CONF_ROUTE_INFO;
+ *(__be16 *)(cri_req+6) = cpu_to_be16(index);
+ cri_req[9] = phy_id;
+ if (SAS_ADDR(sas_addr) == 0 || !include)
+ cri_req[12] |= 0x80;
+ memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
+
+ res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
+ CRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = cri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
+ "index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, index);
+ }
+out:
+ kfree(cri_req);
+ kfree(cri_resp);
+ return res;
+}
+
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include)
+{
+ int index;
+ int present;
+ int res;
+
+ res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
+ if (res)
+ return res;
+ if (include ^ present)
+ return sas_configure_set(dev, phy_id, sas_addr, index,include);
+
+ return res;
+}
+
+/**
+ * sas_configure_parent -- configure routing table of parent
+ * parent: parent expander
+ * child: child expander
+ * sas_addr: SAS port identifier of device directly attached to child
+ */
+static int sas_configure_parent(struct domain_device *parent,
+ struct domain_device *child,
+ u8 *sas_addr, int include)
+{
+ struct expander_device *ex_parent = &parent->ex_dev;
+ int res = 0;
+ int i;
+
+ if (parent->parent) {
+ res = sas_configure_parent(parent->parent, parent, sas_addr,
+ include);
+ if (res)
+ return res;
+ }
+
+ if (ex_parent->conf_route_table == 0) {
+ SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
+ SAS_ADDR(parent->sas_addr));
+ return 0;
+ }
+
+ for (i = 0; i < ex_parent->num_phys; i++) {
+ struct ex_phy *phy = &ex_parent->ex_phy[i];
+
+ if ((phy->routing_attr == TABLE_ROUTING) &&
+ (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr))) {
+ res = sas_configure_phy(parent, i, sas_addr, include);
+ if (res)
+ return res;
+ }
+ }
+
+ return res;
+}
+
+/**
+ * sas_configure_routing -- configure routing
+ * dev: expander device
+ * sas_addr: port identifier of device directly attached to the expander device
+ */
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 1);
+ return 0;
+}
+
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 0);
+ return 0;
+}
+
+#if 0
+#define SMP_BIN_ATTR_NAME "smp_portal"
+
+static void sas_ex_smp_hook(struct domain_device *dev)
+{
+ struct expander_device *ex_dev = &dev->ex_dev;
+ struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
+
+ memset(bin_attr, 0, sizeof(*bin_attr));
+
+ bin_attr->attr.name = SMP_BIN_ATTR_NAME;
+ bin_attr->attr.owner = THIS_MODULE;
+ bin_attr->attr.mode = 0600;
+
+ bin_attr->size = 0;
+ bin_attr->private = NULL;
+ bin_attr->read = smp_portal_read;
+ bin_attr->write= smp_portal_write;
+ bin_attr->mmap = NULL;
+
+ ex_dev->smp_portal_pid = -1;
+ init_MUTEX(&ex_dev->smp_sema);
+}
+#endif
+
+/**
+ * sas_discover_expander -- expander discovery
+ * @ex: pointer to expander domain device
+ *
+ * See comment in sas_discover_sata().
+ */
+static int sas_discover_expander(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_ex_general(dev);
+ if (res)
+ goto out_err;
+ res = sas_ex_manuf_info(dev);
+ if (res)
+ goto out_err;
+
+ res = sas_expander_discover(dev);
+ if (res) {
+ SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out_err;
+ }
+
+ sas_check_ex_subtractive_boundary(dev);
+ res = sas_check_parent_topology(dev);
+ if (res)
+ goto out_err;
+ return 0;
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
+{
+ int res = 0;
+ struct domain_device *dev;
+
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (dev->dev_type == EDGE_DEV ||
+ dev->dev_type == FANOUT_DEV) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(dev->rphy);
+
+ if (level == ex->level)
+ res = sas_ex_discover_devices(dev, -1);
+ else if (level > 0)
+ res = sas_ex_discover_devices(port->port_dev, -1);
+
+ }
+ }
+
+ return res;
+}
+
+static int sas_ex_bfs_disc(struct asd_sas_port *port)
+{
+ int res;
+ int level;
+
+ do {
+ level = port->disc.max_level;
+ res = sas_ex_level_discovery(port, level);
+ mb();
+ } while (level < port->disc.max_level);
+
+ return res;
+}
+
+int sas_discover_root_expander(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+
+ sas_rphy_add(dev->rphy);
+
+ ex->level = dev->port->disc.max_level; /* 0 */
+ res = sas_discover_expander(dev);
+ if (!res)
+ sas_ex_bfs_disc(dev->port);
+
+ return res;
+}
+
+/* ---------- Domain revalidation ---------- */
+
+static int sas_get_phy_discover(struct domain_device *dev,
+ int phy_id, struct smp_resp *disc_resp)
+{
+ int res;
+ u8 *disc_req;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_req[1] = SMP_DISCOVER;
+ disc_req[9] = phy_id;
+
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ goto out;
+ else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+ res = disc_resp->result;
+ goto out;
+ }
+out:
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_get_phy_change_count(struct domain_device *dev,
+ int phy_id, int *pcc)
+{
+ int res;
+ struct smp_resp *disc_resp;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (!res)
+ *pcc = disc_resp->disc.change_count;
+
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
+ int phy_id, u8 *attached_sas_addr)
+{
+ int res;
+ struct smp_resp *disc_resp;
+ struct discover_resp *dr;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+ dr = &disc_resp->disc;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (!res) {
+ memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
+ if (dr->attached_dev_type == 0)
+ memset(attached_sas_addr, 0, 8);
+ }
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
+ int from_phy)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ int i;
+
+ for (i = from_phy; i < ex->num_phys; i++) {
+ int phy_change_count = 0;
+
+ res = sas_get_phy_change_count(dev, i, &phy_change_count);
+ if (res)
+ goto out;
+ else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+ ex->ex_phy[i].phy_change_count = phy_change_count;
+ *phy_id = i;
+ return 0;
+ }
+ }
+out:
+ return res;
+}
+
+static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
+{
+ int res;
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+ if (res)
+ goto out;
+ if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ res = rg_resp->result;
+ goto out;
+ }
+
+ *ecc = be16_to_cpu(rg_resp->rg.change_count);
+out:
+ kfree(rg_resp);
+ kfree(rg_req);
+ return res;
+}
+
+static int sas_find_bcast_dev(struct domain_device *dev,
+ struct domain_device **src_dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int ex_change_count = -1;
+ int res;
+
+ res = sas_get_ex_change_count(dev, &ex_change_count);
+ if (res)
+ goto out;
+ if (ex_change_count != -1 &&
+ ex_change_count != ex->ex_change_count) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ } else {
+ struct domain_device *ch;
+
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == EDGE_DEV ||
+ ch->dev_type == FANOUT_DEV) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (src_dev)
+ return res;
+ }
+ }
+ }
+out:
+ return res;
+}
+
+static void sas_unregister_ex_tree(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child, *n;
+
+ list_for_each_entry_safe(child, n, &ex->children, siblings) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ }
+ sas_unregister_dev(dev);
+}
+
+static void sas_unregister_devs_sas_addr(struct domain_device *parent,
+ int phy_id)
+{
+ struct expander_device *ex_dev = &parent->ex_dev;
+ struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
+ struct domain_device *child, *n;
+
+ list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ break;
+ }
+ }
+ sas_disable_routing(parent, phy->attached_sas_addr);
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ sas_port_delete_phy(phy->port, phy->phy);
+ if (phy->port->num_phys == 0)
+ sas_port_delete(phy->port);
+ phy->port = NULL;
+}
+
+static int sas_discover_bfs_by_root_level(struct domain_device *root,
+ const int level)
+{
+ struct expander_device *ex_root = &root->ex_dev;
+ struct domain_device *child;
+ int res = 0;
+
+ list_for_each_entry(child, &ex_root->children, siblings) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(child->rphy);
+
+ if (level > ex->level)
+ res = sas_discover_bfs_by_root_level(child,
+ level);
+ else if (level == ex->level)
+ res = sas_ex_discover_devices(child, -1);
+ }
+ }
+ return res;
+}
+
+static int sas_discover_bfs_by_root(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+ int level = ex->level+1;
+
+ res = sas_ex_discover_devices(dev, -1);
+ if (res)
+ goto out;
+ do {
+ res = sas_discover_bfs_by_root_level(dev, level);
+ mb();
+ level += 1;
+ } while (level <= dev->port->disc.max_level);
+out:
+ return res;
+}
+
+static int sas_discover_new(struct domain_device *dev, int phy_id)
+{
+ struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
+ struct domain_device *child;
+ int res;
+
+ SAS_DPRINTK("ex %016llx phy%d new device attached\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ goto out;
+ res = sas_ex_discover_devices(dev, phy_id);
+ if (res)
+ goto out;
+ list_for_each_entry(child, &dev->ex_dev.children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ res = sas_discover_bfs_by_root(child);
+ break;
+ }
+ }
+out:
+ return res;
+}
+
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ u8 attached_sas_addr[8];
+ int res;
+
+ res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
+ switch (res) {
+ case SMP_RESP_NO_PHY:
+ phy->phy_state = PHY_NOT_PRESENT;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ goto out; break;
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ goto out; break;
+ case SMP_RESP_FUNC_ACC:
+ break;
+ }
+
+ if (SAS_ADDR(attached_sas_addr) == 0) {
+ phy->phy_state = PHY_EMPTY;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ } else if (SAS_ADDR(attached_sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+ sas_ex_phy_discover(dev, phy_id);
+ } else
+ res = sas_discover_new(dev, phy_id);
+out:
+ return res;
+}
+
+static int sas_rediscover(struct domain_device *dev, const int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
+ int res = 0;
+ int i;
+
+ SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+
+ if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(changed_phy->attached_sas_addr)) {
+ SAS_DPRINTK("phy%d part of wide port with "
+ "phy%d\n", phy_id, i);
+ goto out;
+ }
+ }
+ res = sas_rediscover_dev(dev, phy_id);
+ } else
+ res = sas_discover_new(dev, phy_id);
+out:
+ return res;
+}
+
+/**
+ * sas_revalidate_domain -- revalidate the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+int sas_ex_revalidate_domain(struct domain_device *port_dev)
+{
+ int res;
+ struct domain_device *dev = NULL;
+
+ res = sas_find_bcast_dev(port_dev, &dev);
+ if (res)
+ goto out;
+ if (dev) {
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, phy_id;
+
+ do {
+ phy_id = -1;
+ res = sas_find_bcast_phy(dev, &phy_id, i);
+ if (phy_id == -1)
+ break;
+ res = sas_rediscover(dev, phy_id);
+ i = phy_id + 1;
+ } while (i < ex->num_phys);
+ }
+out:
+ return res;
+}
+
+#if 0
+/* ---------- SMP portal ---------- */
+
+static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
+ size_t size)
+{
+ struct domain_device *dev = to_dom_device(kobj);
+ struct expander_device *ex = &dev->ex_dev;
+
+ if (offs != 0)
+ return -EFBIG;
+ else if (size == 0)
+ return 0;
+
+ down_interruptible(&ex->smp_sema);
+ if (ex->smp_req)
+ kfree(ex->smp_req);
+ ex->smp_req = kzalloc(size, GFP_USER);
+ if (!ex->smp_req) {
+ up(&ex->smp_sema);
+ return -ENOMEM;
+ }
+ memcpy(ex->smp_req, buf, size);
+ ex->smp_req_size = size;
+ ex->smp_portal_pid = current->pid;
+ up(&ex->smp_sema);
+
+ return size;
+}
+
+static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
+ size_t size)
+{
+ struct domain_device *dev = to_dom_device(kobj);
+ struct expander_device *ex = &dev->ex_dev;
+ u8 *smp_resp;
+ int res = -EINVAL;
+
+ /* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
+ * it should be 0.
+ */
+
+ down_interruptible(&ex->smp_sema);
+ if (!ex->smp_req || ex->smp_portal_pid != current->pid)
+ goto out;
+
+ res = 0;
+ if (size == 0)
+ goto out;
+
+ res = -ENOMEM;
+ smp_resp = alloc_smp_resp(size);
+ if (!smp_resp)
+ goto out;
+ res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
+ smp_resp, size);
+ if (!res) {
+ memcpy(buf, smp_resp, size);
+ res = size;
+ }
+
+ kfree(smp_resp);
+out:
+ kfree(ex->smp_req);
+ ex->smp_req = NULL;
+ ex->smp_req_size = 0;
+ ex->smp_portal_pid = -1;
+ up(&ex->smp_sema);
+ return res;
+}
+#endif
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
new file mode 100644
index 0000000..c836a23
--- /dev/null
+++ b/drivers/scsi/libsas/sas_init.c
@@ -0,0 +1,267 @@
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+kmem_cache_t *sas_task_cache;
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+ const u32 poly = 0x00DB2777;
+ u32 r = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ int b;
+ for (b = 7; b >= 0; b--) {
+ r <<= 1;
+ if ((1 << b) & sas_addr[i]) {
+ if (!(r & 0x01000000))
+ r ^= poly;
+ } else if (r & 0x01000000)
+ r ^= poly;
+ }
+ }
+
+ hashed[0] = (r >> 16) & 0xFF;
+ hashed[1] = (r >> 8) & 0xFF ;
+ hashed[2] = r & 0xFF;
+}
+
+
+/* ---------- HA events ---------- */
+
+void sas_hae_reset(void *data)
+{
+ struct sas_ha_struct *ha = data;
+
+ sas_begin_event(HAE_RESET, &ha->event_lock,
+ &ha->pending);
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+ int error = 0;
+
+ spin_lock_init(&sas_ha->phy_port_lock);
+ sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+ if (sas_ha->lldd_queue_size == 0)
+ sas_ha->lldd_queue_size = 1;
+ else if (sas_ha->lldd_queue_size == -1)
+ sas_ha->lldd_queue_size = 128; /* Sanity */
+
+ error = sas_register_phys(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+ return error;
+ }
+
+ error = sas_register_ports(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+ goto Undo_phys;
+ }
+
+ error = sas_init_events(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+ goto Undo_ports;
+ }
+
+ if (sas_ha->lldd_max_execute_num > 1) {
+ error = sas_init_queue(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start queue thread:%d, "
+ "running in direct mode\n", error);
+ sas_ha->lldd_max_execute_num = 1;
+ }
+ }
+
+ return 0;
+
+Undo_ports:
+ sas_unregister_ports(sas_ha);
+Undo_phys:
+
+ return error;
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+ if (sas_ha->lldd_max_execute_num > 1) {
+ sas_shutdown_queue(sas_ha);
+ }
+
+ sas_unregister_ports(sas_ha);
+
+ return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+ if (scsi_is_sas_phy_local(phy))
+ /* FIXME: we have no local phy stats
+ * gathering at this time */
+ return -EINVAL;
+
+ return sas_smp_get_phy_events(phy);
+}
+
+static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ int ret;
+ enum phy_func reset_type;
+
+ if (hard_reset)
+ reset_type = PHY_FUNC_HARD_RESET;
+ else
+ reset_type = PHY_FUNC_LINK_RESET;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL);
+ }
+ return ret;
+}
+
+static int sas_set_phy_speed(struct sas_phy *phy,
+ struct sas_phy_linkrates *rates)
+{
+ int ret;
+
+ if ((rates->minimum_linkrate &&
+ rates->minimum_linkrate > phy->maximum_linkrate) ||
+ (rates->maximum_linkrate &&
+ rates->maximum_linkrate < phy->minimum_linkrate))
+ return -EINVAL;
+
+ if (rates->minimum_linkrate &&
+ rates->minimum_linkrate < phy->minimum_linkrate_hw)
+ rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+ if (rates->maximum_linkrate &&
+ rates->maximum_linkrate > phy->maximum_linkrate_hw)
+ rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, PHY_FUNC_SET_LINK_RATE,
+ rates);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number,
+ PHY_FUNC_LINK_RESET, rates);
+
+ }
+
+ return ret;
+}
+
+static struct sas_function_template sft = {
+ .phy_reset = sas_phy_reset,
+ .set_phy_speed = sas_set_phy_speed,
+ .get_linkerrors = sas_get_linkerrors,
+};
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+ struct scsi_transport_template *stt = sas_attach_transport(&sft);
+ struct sas_internal *i;
+
+ if (!stt)
+ return stt;
+
+ i = to_sas_internal(stt);
+ i->dft = dft;
+ stt->create_work_queue = 1;
+ stt->eh_timed_out = sas_scsi_timed_out;
+ stt->eh_strategy_handler = sas_scsi_recover_host;
+
+ return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+void sas_domain_release_transport(struct scsi_transport_template *stt)
+{
+ sas_release_transport(stt);
+}
+EXPORT_SYMBOL_GPL(sas_domain_release_transport);
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+ sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
+ 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ if (!sas_task_cache)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __exit sas_class_exit(void)
+{
+ kmem_cache_destroy(sas_task_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
new file mode 100644
index 0000000..bffcee4
--- /dev/null
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -0,0 +1,146 @@
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/libsas.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#ifdef SAS_DEBUG
+#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+#else
+#define SAS_DPRINTK(fmt, ...)
+#endif
+
+void sas_scsi_recover_host(struct Scsi_Host *shost);
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_proto proto, char *buf);
+int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+int sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
+
+int sas_init_queue(struct sas_ha_struct *sas_ha);
+int sas_init_events(struct sas_ha_struct *sas_ha);
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
+
+void sas_deform_port(struct asd_sas_phy *phy);
+
+void sas_porte_bytes_dmaed(void *);
+void sas_porte_broadcast_rcvd(void *);
+void sas_porte_link_reset_err(void *);
+void sas_porte_timer_event(void *);
+void sas_porte_hard_reset(void *);
+
+int sas_notify_lldd_dev_found(struct domain_device *);
+void sas_notify_lldd_dev_gone(struct domain_device *);
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func, struct sas_phy_linkrates *);
+int sas_smp_get_phy_events(struct sas_phy *phy);
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
+
+void sas_hae_reset(void *);
+
+static inline void sas_queue_event(int event, spinlock_t *lock,
+ unsigned long *pending,
+ struct work_struct *work,
+ struct Scsi_Host *shost)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+ if (test_bit(event, pending)) {
+ spin_unlock_irqrestore(lock, flags);
+ return;
+ }
+ __set_bit(event, pending);
+ spin_unlock_irqrestore(lock, flags);
+ scsi_queue_work(shost, work);
+}
+
+static inline void sas_begin_event(int event, spinlock_t *lock,
+ unsigned long *pending)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+ __clear_bit(event, pending);
+ spin_unlock_irqrestore(lock, flags);
+}
+
+static inline void sas_fill_in_rphy(struct domain_device *dev,
+ struct sas_rphy *rphy)
+{
+ rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
+ rphy->identify.initiator_port_protocols = dev->iproto;
+ rphy->identify.target_port_protocols = dev->tproto;
+ switch (dev->dev_type) {
+ case SATA_DEV:
+ /* FIXME: need sata device type */
+ case SAS_END_DEV:
+ rphy->identify.device_type = SAS_END_DEVICE;
+ break;
+ case EDGE_DEV:
+ rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
+ break;
+ case FANOUT_DEV:
+ rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
+ break;
+ default:
+ rphy->identify.device_type = SAS_PHY_UNUSED;
+ break;
+ }
+}
+
+static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+
+ if (!ex->parent_port) {
+ ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
+ /* FIXME: error handling */
+ BUG_ON(!ex->parent_port);
+ BUG_ON(sas_port_add(ex->parent_port));
+ sas_port_mark_backlink(ex->parent_port);
+ }
+ sas_port_add_phy(ex->parent_port, ex_phy->phy);
+}
+
+#endif /* _SAS_INTERNAL_H_ */
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
new file mode 100644
index 0000000..9340cdb
--- /dev/null
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -0,0 +1,158 @@
+/*
+ * Serial Attached SCSI (SAS) Phy class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Phy events ---------- */
+
+static void sas_phye_loss_of_signal(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+ phy->error = 0;
+ sas_deform_port(phy);
+}
+
+static void sas_phye_oob_done(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+ phy->error = 0;
+}
+
+static void sas_phye_oob_error(void *data)
+{
+ struct asd_sas_phy *phy = data;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+
+ sas_deform_port(phy);
+
+ if (!port && phy->enabled && i->dft->lldd_control_phy) {
+ phy->error++;
+ switch (phy->error) {
+ case 1:
+ case 2:
+ i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET,
+ NULL);
+ break;
+ case 3:
+ default:
+ phy->error = 0;
+ phy->enabled = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
+ break;
+ }
+ }
+}
+
+static void sas_phye_spinup_hold(void *data)
+{
+ struct asd_sas_phy *phy = data;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+
+ phy->error = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
+}
+
+/* ---------- Phy class registration ---------- */
+
+int sas_register_phys(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = {
+ [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+ [PHYE_OOB_DONE] = sas_phye_oob_done,
+ [PHYE_OOB_ERROR] = sas_phye_oob_error,
+ [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+ };
+
+ static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = {
+ [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+ [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+ [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+ [PORTE_TIMER_EVENT] = sas_porte_timer_event,
+ [PORTE_HARD_RESET] = sas_porte_hard_reset,
+ };
+
+ /* Now register the phys. */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ int k;
+ struct asd_sas_phy *phy = sas_ha->sas_phy[i];
+
+ phy->error = 0;
+ INIT_LIST_HEAD(&phy->port_phy_el);
+ for (k = 0; k < PORT_NUM_EVENTS; k++)
+ INIT_WORK(&phy->port_events[k], sas_port_event_fns[k],
+ phy);
+
+ for (k = 0; k < PHY_NUM_EVENTS; k++)
+ INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k],
+ phy);
+ phy->port = NULL;
+ phy->ha = sas_ha;
+ spin_lock_init(&phy->frame_rcvd_lock);
+ spin_lock_init(&phy->sas_prim_lock);
+ phy->frame_rcvd_size = 0;
+
+ phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
+ i);
+ if (!phy->phy)
+ return -ENOMEM;
+
+ phy->phy->identify.initiator_port_protocols =
+ phy->iproto;
+ phy->phy->identify.target_port_protocols = phy->tproto;
+ phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
+ phy->phy->identify.phy_identifier = i;
+ phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ sas_phy_add(phy->phy);
+ }
+
+ return 0;
+}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
new file mode 100644
index 0000000..253cdcf
--- /dev/null
+++ b/drivers/scsi/libsas/sas_port.c
@@ -0,0 +1,279 @@
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/**
+ * sas_form_port -- add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (port) {
+ if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE) == 0)
+ sas_deform_port(phy);
+ else {
+ SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+ __FUNCTION__, phy->id, phy->port->id,
+ phy->port->num_phys);
+ return;
+ }
+ }
+
+ /* find a port */
+ spin_lock(&sas_ha->phy_port_lock);
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *) port->sas_addr &&
+ memcmp(port->attached_sas_addr,
+ phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
+ port->num_phys > 0) {
+ /* wide port */
+ SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+ port->id);
+ break;
+ } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
+ memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+
+ if (i >= sas_ha->num_phys) {
+ printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+ __FUNCTION__);
+ spin_unlock(&sas_ha->phy_port_lock);
+ return;
+ }
+
+ /* add the phy to the port */
+ list_add_tail(&phy->port_phy_el, &port->phy_list);
+ phy->port = port;
+ port->num_phys++;
+ port->phy_mask |= (1U << phy->id);
+
+ if (!port->phy)
+ port->phy = phy->phy;
+
+ SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
+ port->id, port->phy_mask);
+
+ if (*(u64 *)port->attached_sas_addr == 0) {
+ port->class = phy->class;
+ memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ port->iproto = phy->iproto;
+ port->tproto = phy->tproto;
+ port->oob_mode = phy->oob_mode;
+ port->linkrate = phy->linkrate;
+ } else
+ port->linkrate = max(port->linkrate, phy->linkrate);
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ if (!port->port) {
+ port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+ BUG_ON(!port->port);
+ sas_port_add(port->port);
+ }
+ sas_port_add_phy(port->port, phy->phy);
+
+ if (port->port_dev)
+ port->port_dev->pathways = port->num_phys;
+
+ /* Tell the LLDD about this port formation. */
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_formed(phy);
+
+ sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+}
+
+/**
+ * sas_deform_port -- remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy)
+{
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (!port)
+ return; /* done by a phy event */
+
+ if (port->port_dev)
+ port->port_dev->pathways--;
+
+ if (port->num_phys == 1) {
+ sas_unregister_domain_devices(port);
+ sas_port_delete(port->port);
+ port->port = NULL;
+ } else
+ sas_port_delete_phy(port->port, phy->phy);
+
+
+ if (si->dft->lldd_port_deformed)
+ si->dft->lldd_port_deformed(phy);
+
+ spin_lock(&sas_ha->phy_port_lock);
+ spin_lock(&port->phy_list_lock);
+
+ list_del_init(&phy->port_phy_el);
+ phy->port = NULL;
+ port->num_phys--;
+ port->phy_mask &= ~(1U << phy->id);
+
+ if (port->num_phys == 0) {
+ INIT_LIST_HEAD(&port->phy_list);
+ memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ port->class = 0;
+ port->iproto = 0;
+ port->tproto = 0;
+ port->oob_mode = 0;
+ port->phy_mask = 0;
+ }
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(void *data)
+{
+ unsigned long flags;
+ u32 prim;
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ spin_lock_irqsave(&phy->sas_prim_lock, flags);
+ prim = phy->sas_prim;
+ spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+ SAS_DPRINTK("broadcast received: %d\n", prim);
+ sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+void sas_porte_link_reset_err(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_timer_event(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_hard_reset(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+ struct sas_ha_struct *sas_ha, int i)
+{
+ port->id = i;
+ INIT_LIST_HEAD(&port->dev_list);
+ spin_lock_init(&port->phy_list_lock);
+ INIT_LIST_HEAD(&port->phy_list);
+ port->num_phys = 0;
+ port->phy_mask = 0;
+ port->ha = sas_ha;
+
+ spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ /* initialize the ports and discovery */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_port *port = sas_ha->sas_port[i];
+
+ sas_init_port(port, sas_ha, i);
+ sas_init_disc(&port->disc, port);
+ }
+ return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ for (i = 0; i < sas_ha->num_phys; i++)
+ if (sas_ha->sas_phy[i]->port)
+ sas_deform_port(sas_ha->sas_phy[i]);
+
+}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
new file mode 100644
index 0000000..43e0e4e
--- /dev/null
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -0,0 +1,786 @@
+/*
+ * Serial Attached SCSI (SAS) class SCSI Host glue.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/scatterlist.h>
+
+/* ---------- SCSI Host glue ---------- */
+
+#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+ struct task_status_struct *ts = &task->task_status;
+ struct scsi_cmnd *sc = task->uldd_task;
+ unsigned ts_flags = task->task_state_flags;
+ int hs = 0, stat = 0;
+
+ if (unlikely(!sc)) {
+ SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+ list_del_init(&task->list);
+ sas_free_task(task);
+ return;
+ }
+
+ if (ts->resp == SAS_TASK_UNDELIVERED) {
+ /* transport error */
+ hs = DID_NO_CONNECT;
+ } else { /* ts->resp == SAS_TASK_COMPLETE */
+ /* task delivered, what happened afterwards? */
+ switch (ts->stat) {
+ case SAS_DEV_NO_RESPONSE:
+ case SAS_INTERRUPTED:
+ case SAS_PHY_DOWN:
+ case SAS_NAK_R_ERR:
+ case SAS_OPEN_TO:
+ hs = DID_NO_CONNECT;
+ break;
+ case SAS_DATA_UNDERRUN:
+ sc->resid = ts->residual;
+ if (sc->request_bufflen - sc->resid < sc->underflow)
+ hs = DID_ERROR;
+ break;
+ case SAS_DATA_OVERRUN:
+ hs = DID_ERROR;
+ break;
+ case SAS_QUEUE_FULL:
+ hs = DID_SOFT_ERROR; /* retry */
+ break;
+ case SAS_DEVICE_UNKNOWN:
+ hs = DID_BAD_TARGET;
+ break;
+ case SAS_SG_ERR:
+ hs = DID_PARITY;
+ break;
+ case SAS_OPEN_REJECT:
+ if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
+ hs = DID_SOFT_ERROR; /* retry */
+ else
+ hs = DID_ERROR;
+ break;
+ case SAS_PROTO_RESPONSE:
+ SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+ "task; please report this\n",
+ task->dev->port->ha->sas_ha_name);
+ break;
+ case SAS_ABORTED_TASK:
+ hs = DID_ABORT;
+ break;
+ case SAM_CHECK_COND:
+ memcpy(sc->sense_buffer, ts->buf,
+ max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+ stat = SAM_CHECK_COND;
+ break;
+ default:
+ stat = ts->stat;
+ break;
+ }
+ }
+ ASSIGN_SAS_TASK(sc, NULL);
+ sc->result = (hs << 16) | stat;
+ list_del_init(&task->list);
+ sas_free_task(task);
+ /* This is very ugly but this is how SCSI Core works. */
+ if (ts_flags & SAS_TASK_STATE_ABORTED)
+ scsi_finish_command(sc);
+ else
+ sc->scsi_done(sc);
+}
+
+static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
+{
+ enum task_attribute ta = TASK_ATTR_SIMPLE;
+ if (cmd->request && blk_rq_tagged(cmd->request)) {
+ if (cmd->device->ordered_tags &&
+ (cmd->request->flags & REQ_HARDBARRIER))
+ ta = TASK_ATTR_HOQ;
+ }
+ return ta;
+}
+
+static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
+ struct domain_device *dev,
+ unsigned long gfp_flags)
+{
+ struct sas_task *task = sas_alloc_task(gfp_flags);
+ struct scsi_lun lun;
+
+ if (!task)
+ return NULL;
+
+ *(u32 *)cmd->sense_buffer = 0;
+ task->uldd_task = cmd;
+ ASSIGN_SAS_TASK(cmd, task);
+
+ task->dev = dev;
+ task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
+
+ task->ssp_task.retry_count = 1;
+ int_to_scsilun(cmd->device->lun, &lun);
+ memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
+ task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd);
+ memcpy(task->ssp_task.cdb, cmd->cmnd, 16);
+
+ task->scatter = cmd->request_buffer;
+ task->num_scatter = cmd->use_sg;
+ task->total_xfer_len = cmd->request_bufflen;
+ task->data_dir = cmd->sc_data_direction;
+
+ task->task_done = sas_scsi_task_done;
+
+ return task;
+}
+
+static int sas_queue_up(struct sas_task *task)
+{
+ struct sas_ha_struct *sas_ha = task->dev->port->ha;
+ struct scsi_core *core = &sas_ha->core;
+ unsigned long flags;
+ LIST_HEAD(list);
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ return -SAS_QUEUE_FULL;
+ }
+ list_add_tail(&task->list, &core->task_queue);
+ core->task_queue_size += 1;
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ up(&core->queue_thread_sema);
+
+ return 0;
+}
+
+/**
+ * sas_queuecommand -- Enqueue a command for processing
+ * @parameters: See SCSI Core documentation
+ *
+ * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
+ * call us without holding an IRQ spinlock...
+ */
+int sas_queuecommand(struct scsi_cmnd *cmd,
+ void (*scsi_done)(struct scsi_cmnd *))
+{
+ int res = 0;
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct Scsi_Host *host = cmd->device->host;
+ struct sas_internal *i = to_sas_internal(host->transportt);
+
+ spin_unlock_irq(host->host_lock);
+
+ {
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct sas_task *task;
+
+ res = -ENOMEM;
+ task = sas_create_task(cmd, dev, GFP_ATOMIC);
+ if (!task)
+ goto out;
+
+ cmd->scsi_done = scsi_done;
+ /* Queue up, Direct Mode or Task Collector Mode. */
+ if (sas_ha->lldd_max_execute_num < 2)
+ res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+ else
+ res = sas_queue_up(task);
+
+ /* Examine */
+ if (res) {
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ if (res == -SAS_QUEUE_FULL) {
+ cmd->result = DID_SOFT_ERROR << 16; /* retry */
+ res = 0;
+ scsi_done(cmd);
+ }
+ goto out;
+ }
+ }
+out:
+ spin_lock_irq(host->host_lock);
+ return res;
+}
+
+static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ if (cmd == my_cmd)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
+ struct domain_device *dev)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *x = cmd_to_domain_dev(cmd);
+
+ if (x == dev)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+static void sas_scsi_clear_queue_port(struct list_head *error_q,
+ struct asd_sas_port *port)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct asd_sas_port *x = dev->port;
+
+ if (x == port)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+enum task_disposition {
+ TASK_IS_DONE,
+ TASK_IS_ABORTED,
+ TASK_IS_AT_LU,
+ TASK_IS_NOT_AT_LU,
+};
+
+static enum task_disposition sas_scsi_find_task(struct sas_task *task)
+{
+ struct sas_ha_struct *ha = task->dev->port->ha;
+ unsigned long flags;
+ int i, res;
+ struct sas_internal *si =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+ if (ha->lldd_max_execute_num > 1) {
+ struct scsi_core *core = &ha->core;
+ struct sas_task *t, *n;
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ list_for_each_entry_safe(t, n, &core->task_queue, list) {
+ if (task == t) {
+ list_del_init(&t->list);
+ spin_unlock_irqrestore(&core->task_queue_lock,
+ flags);
+ SAS_DPRINTK("%s: task 0x%p aborted from "
+ "task_queue\n",
+ __FUNCTION__, task);
+ return TASK_IS_ABORTED;
+ }
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ }
+
+ for (i = 0; i < 5; i++) {
+ SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+ res = si->dft->lldd_abort_task(task);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ task);
+ return TASK_IS_DONE;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __FUNCTION__, task);
+ return TASK_IS_ABORTED;
+ } else if (si->dft->lldd_query_task) {
+ SAS_DPRINTK("%s: querying task 0x%p\n",
+ __FUNCTION__, task);
+ res = si->dft->lldd_query_task(task);
+ if (res == TMF_RESP_FUNC_SUCC) {
+ SAS_DPRINTK("%s: task 0x%p at LU\n",
+ __FUNCTION__, task);
+ return TASK_IS_AT_LU;
+ } else if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("%s: task 0x%p not at LU\n",
+ __FUNCTION__, task);
+ return TASK_IS_NOT_AT_LU;
+ }
+ }
+ }
+ return res;
+}
+
+static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct scsi_lun lun;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ int_to_scsilun(cmd->device->lun, &lun);
+
+ SAS_DPRINTK("eh: device %llx LUN %x has the task\n",
+ SAS_ADDR(dev->sas_addr),
+ cmd->device->lun);
+
+ if (i->dft->lldd_abort_task_set)
+ res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_clear_task_set)
+ res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
+ }
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_lu_reset)
+ res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+ }
+
+ return res;
+}
+
+static int sas_recover_I_T(struct domain_device *dev)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+ SAS_ADDR(dev->sas_addr));
+
+ if (i->dft->lldd_I_T_nexus_reset)
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+
+ return res;
+}
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ unsigned long flags;
+ LIST_HEAD(error_q);
+ struct scsi_cmnd *cmd, *n;
+ enum task_disposition res = TASK_IS_DONE;
+ int tmf_resp;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_splice_init(&shost->eh_cmd_q, &error_q);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+
+ /* All tasks on this list were marked SAS_TASK_STATE_ABORTED
+ * by sas_scsi_timed_out() callback.
+ */
+Again:
+ SAS_DPRINTK("going over list...\n");
+ list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ struct sas_task *task = TO_SAS_TASK(cmd);
+
+ SAS_DPRINTK("trying to find task 0x%p\n", task);
+ list_del_init(&cmd->eh_entry);
+ res = sas_scsi_find_task(task);
+
+ cmd->eh_eflags = 0;
+ shost->host_failed--;
+
+ switch (res) {
+ case TASK_IS_DONE:
+ SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ task);
+ task->task_done(task);
+ continue;
+ case TASK_IS_ABORTED:
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __FUNCTION__, task);
+ task->task_done(task);
+ continue;
+ case TASK_IS_AT_LU:
+ SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ tmf_resp = sas_recover_lu(task->dev, cmd);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("dev %016llx LU %x is "
+ "recovered\n",
+ SAS_ADDR(task->dev),
+ cmd->device->lun);
+ task->task_done(task);
+ sas_scsi_clear_queue_lu(&error_q, cmd);
+ goto Again;
+ }
+ /* fallthrough */
+ case TASK_IS_NOT_AT_LU:
+ SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+ task);
+ tmf_resp = sas_recover_I_T(task->dev);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("I_T %016llx recovered\n",
+ SAS_ADDR(task->dev->sas_addr));
+ task->task_done(task);
+ sas_scsi_clear_queue_I_T(&error_q, task->dev);
+ goto Again;
+ }
+ /* Hammer time :-) */
+ if (i->dft->lldd_clear_nexus_port) {
+ struct asd_sas_port *port = task->dev->port;
+ SAS_DPRINTK("clearing nexus for port:%d\n",
+ port->id);
+ res = i->dft->lldd_clear_nexus_port(port);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus port:%d "
+ "succeeded\n", port->id);
+ task->task_done(task);
+ sas_scsi_clear_queue_port(&error_q,
+ port);
+ goto Again;
+ }
+ }
+ if (i->dft->lldd_clear_nexus_ha) {
+ SAS_DPRINTK("clear nexus ha\n");
+ res = i->dft->lldd_clear_nexus_ha(ha);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus ha "
+ "succeeded\n");
+ task->task_done(task);
+ goto out;
+ }
+ }
+ /* If we are here -- this means that no amount
+ * of effort could recover from errors. Quite
+ * possibly the HA just disappeared.
+ */
+ SAS_DPRINTK("error from device %llx, LUN %x "
+ "couldn't be recovered in any way\n",
+ SAS_ADDR(task->dev->sas_addr),
+ cmd->device->lun);
+
+ task->task_done(task);
+ goto clear_q;
+ }
+ }
+out:
+ SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+ return;
+clear_q:
+ SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+ list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ struct sas_task *task = TO_SAS_TASK(cmd);
+ list_del_init(&cmd->eh_entry);
+ task->task_done(task);
+ }
+}
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct sas_task *task = TO_SAS_TASK(cmd);
+ unsigned long flags;
+
+ if (!task) {
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+ cmd, task);
+ return EH_HANDLED;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+ cmd, task);
+ return EH_HANDLED;
+ }
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n",
+ cmd, task);
+
+ return EH_NOT_HANDLED;
+}
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct domain_device *found_dev = NULL;
+ int i;
+
+ spin_lock(&ha->phy_port_lock);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_port *port = ha->sas_port[i];
+ struct domain_device *dev;
+
+ spin_lock(&port->dev_list_lock);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (rphy == dev->rphy) {
+ found_dev = dev;
+ spin_unlock(&port->dev_list_lock);
+ goto found;
+ }
+ }
+ spin_unlock(&port->dev_list_lock);
+ }
+ found:
+ spin_unlock(&ha->phy_port_lock);
+
+ return found_dev;
+}
+
+static inline struct domain_device *sas_find_target(struct scsi_target *starget)
+{
+ struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
+
+ return sas_find_dev_by_rphy(rphy);
+}
+
+int sas_target_alloc(struct scsi_target *starget)
+{
+ struct domain_device *found_dev = sas_find_target(starget);
+
+ if (!found_dev)
+ return -ENODEV;
+
+ starget->hostdata = found_dev;
+ return 0;
+}
+
+#define SAS_DEF_QD 32
+#define SAS_MAX_QD 64
+
+int sas_slave_configure(struct scsi_device *scsi_dev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ struct sas_ha_struct *sas_ha;
+
+ BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
+
+ sas_ha = dev->port->ha;
+
+ sas_read_port_mode_page(scsi_dev);
+
+ if (scsi_dev->tagged_supported) {
+ scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG);
+ scsi_activate_tcq(scsi_dev, SAS_DEF_QD);
+ } else {
+ SAS_DPRINTK("device %llx, LUN %x doesn't support "
+ "TCQ\n", SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
+ scsi_dev->tagged_supported = 0;
+ scsi_set_tag_type(scsi_dev, 0);
+ scsi_deactivate_tcq(scsi_dev, 1);
+ }
+
+ return 0;
+}
+
+void sas_slave_destroy(struct scsi_device *scsi_dev)
+{
+}
+
+int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
+{
+ int res = min(new_depth, SAS_MAX_QD);
+
+ if (scsi_dev->tagged_supported)
+ scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
+ res);
+ else {
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ sas_printk("device %llx LUN %x queue depth changed to 1\n",
+ SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
+ scsi_adjust_queue_depth(scsi_dev, 0, 1);
+ res = 1;
+ }
+
+ return res;
+}
+
+int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
+{
+ if (!scsi_dev->tagged_supported)
+ return 0;
+
+ scsi_deactivate_tcq(scsi_dev, 1);
+
+ scsi_set_tag_type(scsi_dev, qt);
+ scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
+
+ return qt;
+}
+
+int sas_bios_param(struct scsi_device *scsi_dev,
+ struct block_device *bdev,
+ sector_t capacity, int *hsc)
+{
+ hsc[0] = 255;
+ hsc[1] = 63;
+ sector_div(capacity, 255*63);
+ hsc[2] = capacity;
+
+ return 0;
+}
+
+/* ---------- Task Collector Thread implementation ---------- */
+
+static void sas_queue(struct sas_ha_struct *sas_ha)
+{
+ struct scsi_core *core = &sas_ha->core;
+ unsigned long flags;
+ LIST_HEAD(q);
+ int can_queue;
+ int res;
+ struct sas_internal *i = to_sas_internal(core->shost->transportt);
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ while (!core->queue_thread_kill &&
+ !list_empty(&core->task_queue)) {
+
+ can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
+ if (can_queue >= 0) {
+ can_queue = core->task_queue_size;
+ list_splice_init(&core->task_queue, &q);
+ } else {
+ struct list_head *a, *n;
+
+ can_queue = sas_ha->lldd_queue_size;
+ list_for_each_safe(a, n, &core->task_queue) {
+ list_move_tail(a, &q);
+ if (--can_queue == 0)
+ break;
+ }
+ can_queue = sas_ha->lldd_queue_size;
+ }
+ core->task_queue_size -= can_queue;
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ {
+ struct sas_task *task = list_entry(q.next,
+ struct sas_task,
+ list);
+ list_del_init(&q);
+ res = i->dft->lldd_execute_task(task, can_queue,
+ GFP_KERNEL);
+ if (unlikely(res))
+ __list_add(&q, task->list.prev, &task->list);
+ }
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ if (res) {
+ list_splice_init(&q, &core->task_queue); /*at head*/
+ core->task_queue_size += can_queue;
+ }
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+static DECLARE_COMPLETION(queue_th_comp);
+
+/**
+ * sas_queue_thread -- The Task Collector thread
+ * @_sas_ha: pointer to struct sas_ha
+ */
+static int sas_queue_thread(void *_sas_ha)
+{
+ struct sas_ha_struct *sas_ha = _sas_ha;
+ struct scsi_core *core = &sas_ha->core;
+
+ daemonize("sas_queue_%d", core->shost->host_no);
+ current->flags |= PF_NOFREEZE;
+
+ complete(&queue_th_comp);
+
+ while (1) {
+ down_interruptible(&core->queue_thread_sema);
+ sas_queue(sas_ha);
+ if (core->queue_thread_kill)
+ break;
+ }
+
+ complete(&queue_th_comp);
+
+ return 0;
+}
+
+int sas_init_queue(struct sas_ha_struct *sas_ha)
+{
+ int res;
+ struct scsi_core *core = &sas_ha->core;
+
+ spin_lock_init(&core->task_queue_lock);
+ core->task_queue_size = 0;
+ INIT_LIST_HEAD(&core->task_queue);
+ init_MUTEX_LOCKED(&core->queue_thread_sema);
+
+ res = kernel_thread(sas_queue_thread, sas_ha, 0);
+ if (res >= 0)
+ wait_for_completion(&queue_th_comp);
+
+ return res < 0 ? res : 0;
+}
+
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
+{
+ unsigned long flags;
+ struct scsi_core *core = &sas_ha->core;
+ struct sas_task *task, *n;
+
+ init_completion(&queue_th_comp);
+ core->queue_thread_kill = 1;
+ up(&core->queue_thread_sema);
+ wait_for_completion(&queue_th_comp);
+
+ if (!list_empty(&core->task_queue))
+ SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
+ SAS_ADDR(sas_ha->sas_addr));
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ list_for_each_entry_safe(task, n, &core->task_queue, list) {
+ struct scsi_cmnd *cmd = task->uldd_task;
+
+ list_del_init(&task->list);
+
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd);
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(sas_queuecommand);
+EXPORT_SYMBOL_GPL(sas_target_alloc);
+EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_slave_destroy);
+EXPORT_SYMBOL_GPL(sas_change_queue_depth);
+EXPORT_SYMBOL_GPL(sas_change_queue_type);
+EXPORT_SYMBOL_GPL(sas_bios_param);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index d44f9aa..3f7f5f8 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -285,6 +285,7 @@
uint32_t cfg_log_verbose;
uint32_t cfg_lun_queue_depth;
uint32_t cfg_nodev_tmo;
+ uint32_t cfg_devloss_tmo;
uint32_t cfg_hba_queue_depth;
uint32_t cfg_fcp_class;
uint32_t cfg_use_adisc;
@@ -302,6 +303,9 @@
uint32_t cfg_poll_tmo;
uint32_t cfg_sg_seg_cnt;
uint32_t cfg_sg_dma_buf_size;
+ uint64_t cfg_soft_wwpn;
+
+ uint32_t dev_loss_tmo_changed;
lpfc_vpd_t vpd; /* vital product data */
@@ -351,6 +355,8 @@
#define VPD_PORT 0x8 /* valid vpd port data */
#define VPD_MASK 0xf /* mask for any vpd data */
+ uint8_t soft_wwpn_enable;
+
struct timer_list fcp_poll_timer;
struct timer_list els_tmofunc;
@@ -391,3 +397,5 @@
struct list_head list;
uint32_t data;
};
+
+#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d384c16..9496e87 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -39,6 +39,9 @@
#include "lpfc_compat.h"
#include "lpfc_crtn.h"
+#define LPFC_DEF_DEVLOSS_TMO 30
+#define LPFC_MIN_DEVLOSS_TMO 1
+#define LPFC_MAX_DEVLOSS_TMO 255
static void
lpfc_jedec_to_ascii(int incr, char hdw[])
@@ -548,6 +551,119 @@
lpfc_board_mode_show, lpfc_board_mode_store);
static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
+
+static char *lpfc_soft_wwpn_key = "C99G71SL8032A";
+
+static ssize_t
+lpfc_soft_wwpn_enable_store(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ unsigned int cnt = count;
+
+ /*
+ * We're doing a simple sanity check for soft_wwpn setting.
+ * We require that the user write a specific key to enable
+ * the soft_wwpn attribute to be settable. Once the attribute
+ * is written, the enable key resets. If further updates are
+ * desired, the key must be written again to re-enable the
+ * attribute.
+ *
+ * The "key" is not secret - it is a hardcoded string shown
+ * here. The intent is to protect against the random user or
+ * application that is just writing attributes.
+ */
+
+ /* count may include a LF at end of string */
+ if (buf[cnt-1] == '\n')
+ cnt--;
+
+ if ((cnt != strlen(lpfc_soft_wwpn_key)) ||
+ (strncmp(buf, lpfc_soft_wwpn_key, strlen(lpfc_soft_wwpn_key)) != 0))
+ return -EINVAL;
+
+ phba->soft_wwpn_enable = 1;
+ return count;
+}
+static CLASS_DEVICE_ATTR(lpfc_soft_wwpn_enable, S_IWUSR, NULL,
+ lpfc_soft_wwpn_enable_store);
+
+static ssize_t
+lpfc_soft_wwpn_show(struct class_device *cdev, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ return snprintf(buf, PAGE_SIZE, "0x%llx\n", phba->cfg_soft_wwpn);
+}
+
+
+static ssize_t
+lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ struct completion online_compl;
+ int stat1=0, stat2=0;
+ unsigned int i, j, cnt=count;
+ u8 wwpn[8];
+
+ /* count may include a LF at end of string */
+ if (buf[cnt-1] == '\n')
+ cnt--;
+
+ if (!phba->soft_wwpn_enable || (cnt < 16) || (cnt > 18) ||
+ ((cnt == 17) && (*buf++ != 'x')) ||
+ ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x'))))
+ return -EINVAL;
+
+ phba->soft_wwpn_enable = 0;
+
+ memset(wwpn, 0, sizeof(wwpn));
+
+ /* Validate and store the new name */
+ for (i=0, j=0; i < 16; i++) {
+ if ((*buf >= 'a') && (*buf <= 'f'))
+ j = ((j << 4) | ((*buf++ -'a') + 10));
+ else if ((*buf >= 'A') && (*buf <= 'F'))
+ j = ((j << 4) | ((*buf++ -'A') + 10));
+ else if ((*buf >= '0') && (*buf <= '9'))
+ j = ((j << 4) | (*buf++ -'0'));
+ else
+ return -EINVAL;
+ if (i % 2) {
+ wwpn[i/2] = j & 0xff;
+ j = 0;
+ }
+ }
+ phba->cfg_soft_wwpn = wwn_to_u64(wwpn);
+ fc_host_port_name(host) = phba->cfg_soft_wwpn;
+
+ dev_printk(KERN_NOTICE, &phba->pcidev->dev,
+ "lpfc%d: Reinitializing to use soft_wwpn\n", phba->brd_no);
+
+ init_completion(&online_compl);
+ lpfc_workq_post_event(phba, &stat1, &online_compl, LPFC_EVT_OFFLINE);
+ wait_for_completion(&online_compl);
+ if (stat1)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0463 lpfc_soft_wwpn attribute set failed to reinit "
+ "adapter - %d\n", phba->brd_no, stat1);
+
+ init_completion(&online_compl);
+ lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE);
+ wait_for_completion(&online_compl);
+ if (stat2)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0464 lpfc_soft_wwpn attribute set failed to reinit "
+ "adapter - %d\n", phba->brd_no, stat2);
+
+ return (stat1 || stat2) ? -EIO : count;
+}
+static CLASS_DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\
+ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
+
+
static int lpfc_poll = 0;
module_param(lpfc_poll, int, 0);
MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
@@ -559,6 +675,123 @@
lpfc_poll_show, lpfc_poll_store);
/*
+# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
+# until the timer expires. Value range is [0,255]. Default value is 30.
+*/
+static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
+static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO;
+module_param(lpfc_nodev_tmo, int, 0);
+MODULE_PARM_DESC(lpfc_nodev_tmo,
+ "Seconds driver will hold I/O waiting "
+ "for a device to come back");
+static ssize_t
+lpfc_nodev_tmo_show(struct class_device *cdev, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ int val = 0;
+ val = phba->cfg_devloss_tmo;
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ phba->cfg_devloss_tmo);
+}
+
+static int
+lpfc_nodev_tmo_init(struct lpfc_hba *phba, int val)
+{
+ static int warned;
+ if (phba->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {
+ phba->cfg_nodev_tmo = phba->cfg_devloss_tmo;
+ if (!warned && val != LPFC_DEF_DEVLOSS_TMO) {
+ warned = 1;
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0402 Ignoring nodev_tmo module "
+ "parameter because devloss_tmo is"
+ " set.\n",
+ phba->brd_no);
+ }
+ return 0;
+ }
+
+ if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
+ phba->cfg_nodev_tmo = val;
+ phba->cfg_devloss_tmo = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0400 lpfc_nodev_tmo attribute cannot be set to %d, "
+ "allowed range is [%d, %d]\n",
+ phba->brd_no, val,
+ LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
+ phba->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
+ return -EINVAL;
+}
+
+static int
+lpfc_nodev_tmo_set(struct lpfc_hba *phba, int val)
+{
+ if (phba->dev_loss_tmo_changed ||
+ (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0401 Ignoring change to nodev_tmo "
+ "because devloss_tmo is set.\n",
+ phba->brd_no);
+ return 0;
+ }
+
+ if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
+ phba->cfg_nodev_tmo = val;
+ phba->cfg_devloss_tmo = val;
+ return 0;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0403 lpfc_nodev_tmo attribute cannot be set to %d, "
+ "allowed range is [%d, %d]\n",
+ phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO,
+ LPFC_MAX_DEVLOSS_TMO);
+ return -EINVAL;
+}
+
+lpfc_param_store(nodev_tmo)
+
+static CLASS_DEVICE_ATTR(lpfc_nodev_tmo, S_IRUGO | S_IWUSR,
+ lpfc_nodev_tmo_show, lpfc_nodev_tmo_store);
+
+/*
+# lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that
+# disappear until the timer expires. Value range is [0,255]. Default
+# value is 30.
+*/
+module_param(lpfc_devloss_tmo, int, 0);
+MODULE_PARM_DESC(lpfc_devloss_tmo,
+ "Seconds driver will hold I/O waiting "
+ "for a device to come back");
+lpfc_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
+ LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)
+lpfc_param_show(devloss_tmo)
+static int
+lpfc_devloss_tmo_set(struct lpfc_hba *phba, int val)
+{
+ if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
+ phba->cfg_nodev_tmo = val;
+ phba->cfg_devloss_tmo = val;
+ phba->dev_loss_tmo_changed = 1;
+ return 0;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0404 lpfc_devloss_tmo attribute cannot be set to"
+ " %d, allowed range is [%d, %d]\n",
+ phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO,
+ LPFC_MAX_DEVLOSS_TMO);
+ return -EINVAL;
+}
+
+lpfc_param_store(devloss_tmo)
+static CLASS_DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
+ lpfc_devloss_tmo_show, lpfc_devloss_tmo_store);
+
+/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
@@ -617,14 +850,6 @@
"Start scanning for devices from highest ALPA to lowest");
/*
-# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
-# until the timer expires. Value range is [0,255]. Default value is 30.
-# NOTE: this MUST be less then the SCSI Layer command timeout - 1.
-*/
-LPFC_ATTR_RW(nodev_tmo, 30, 0, 255,
- "Seconds driver will hold I/O waiting for a device to come back");
-
-/*
# lpfc_topology: link topology for init link
# 0x0 = attempt loop mode then point-to-point
# 0x01 = internal loopback mode
@@ -720,6 +945,7 @@
LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
"Milliseconds driver will wait between polling FCP ring");
+
struct class_device_attribute *lpfc_host_attrs[] = {
&class_device_attr_info,
&class_device_attr_serialnum,
@@ -737,6 +963,7 @@
&class_device_attr_lpfc_lun_queue_depth,
&class_device_attr_lpfc_hba_queue_depth,
&class_device_attr_lpfc_nodev_tmo,
+ &class_device_attr_lpfc_devloss_tmo,
&class_device_attr_lpfc_fcp_class,
&class_device_attr_lpfc_use_adisc,
&class_device_attr_lpfc_ack0,
@@ -754,6 +981,8 @@
&class_device_attr_issue_reset,
&class_device_attr_lpfc_poll,
&class_device_attr_lpfc_poll_tmo,
+ &class_device_attr_lpfc_soft_wwpn,
+ &class_device_attr_lpfc_soft_wwpn_enable,
NULL,
};
@@ -1204,6 +1433,15 @@
fc_host_fabric_name(shost) = node_name;
}
+static void
+lpfc_get_host_symbolic_name (struct Scsi_Host *shost)
+{
+ struct lpfc_hba *phba = (struct lpfc_hba*)shost->hostdata;
+
+ spin_lock_irq(shost->host_lock);
+ lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost));
+ spin_unlock_irq(shost->host_lock);
+}
static struct fc_host_statistics *
lpfc_get_stats(struct Scsi_Host *shost)
@@ -1441,27 +1679,12 @@
}
static void
-lpfc_get_rport_loss_tmo(struct fc_rport *rport)
-{
- /*
- * Return the driver's global value for device loss timeout plus
- * five seconds to allow the driver's nodev timer to run.
- */
- rport->dev_loss_tmo = lpfc_nodev_tmo + 5;
-}
-
-static void
lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
- /*
- * The driver doesn't have a per-target timeout setting. Set
- * this value globally. lpfc_nodev_tmo should be greater then 0.
- */
if (timeout)
- lpfc_nodev_tmo = timeout;
+ rport->dev_loss_tmo = timeout;
else
- lpfc_nodev_tmo = 1;
- rport->dev_loss_tmo = lpfc_nodev_tmo + 5;
+ rport->dev_loss_tmo = 1;
}
@@ -1486,7 +1709,6 @@
.show_host_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_fc4s = 1,
- .show_host_symbolic_name = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
@@ -1509,6 +1731,9 @@
.get_host_fabric_name = lpfc_get_host_fabric_name,
.show_host_fabric_name = 1,
+ .get_host_symbolic_name = lpfc_get_host_symbolic_name,
+ .show_host_symbolic_name = 1,
+
/*
* The LPFC driver treats linkdown handling as target loss events
* so there are no sysfs handlers for link_down_tmo.
@@ -1521,7 +1746,6 @@
.show_rport_maxframe_size = 1,
.show_rport_supported_classes = 1,
- .get_rport_dev_loss_tmo = lpfc_get_rport_loss_tmo,
.set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
@@ -1535,6 +1759,8 @@
.show_starget_port_name = 1,
.issue_fc_host_lip = lpfc_issue_lip,
+ .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
+ .terminate_rport_io = lpfc_terminate_rport_io,
};
void
@@ -1550,14 +1776,15 @@
lpfc_ack0_init(phba, lpfc_ack0);
lpfc_topology_init(phba, lpfc_topology);
lpfc_scan_down_init(phba, lpfc_scan_down);
- lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo);
lpfc_link_speed_init(phba, lpfc_link_speed);
lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
lpfc_discovery_threads_init(phba, lpfc_discovery_threads);
lpfc_max_luns_init(phba, lpfc_max_luns);
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
-
+ lpfc_devloss_tmo_init(phba, lpfc_devloss_tmo);
+ lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo);
phba->cfg_poll = lpfc_poll;
+ phba->cfg_soft_wwpn = 0L;
/*
* The total number of segments is the configuration value plus 2
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 2a17646..3d68449 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -18,6 +18,7 @@
* included with this package. *
*******************************************************************/
+struct fc_rport;
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
@@ -200,6 +201,8 @@
extern struct fc_function_template lpfc_transport_functions;
void lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp);
+void lpfc_terminate_rport_io(struct fc_rport *);
+void lpfc_dev_loss_tmo_callbk(struct fc_rport *rport);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index bbb7310..ae41064 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -324,7 +324,6 @@
struct lpfc_sli_ct_request *Response =
(struct lpfc_sli_ct_request *) mp->virt;
struct lpfc_nodelist *ndlp = NULL;
- struct lpfc_nodelist *next_ndlp;
struct lpfc_dmabuf *mlast, *next_mp;
uint32_t *ctptr = (uint32_t *) & Response->un.gid.PortType;
uint32_t Did;
@@ -399,30 +398,6 @@
* current driver state.
*/
if (phba->hba_state == LPFC_HBA_READY) {
-
- /*
- * Switch ports that connect a loop of multiple targets need
- * special consideration. The driver wants to unregister the
- * rpi only on the target that was pulled from the loop. On
- * RSCN, the driver wants to rediscover an NPort only if the
- * driver flagged it as NLP_NPR_2B_DISC. Provided adisc is
- * not enabled and the NPort is not capable of retransmissions
- * (FC Tape) prevent timing races with the scsi error handler by
- * unregistering the Nport's RPI. This action causes all
- * outstanding IO to flush back to the midlayer.
- */
- list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_npr_list,
- nlp_listp) {
- if (!(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
- (lpfc_rscn_payload_check(phba, ndlp->nlp_DID))) {
- if ((phba->cfg_use_adisc == 0) &&
- !(ndlp->nlp_fcp_info &
- NLP_FCP_2_DEVICE)) {
- lpfc_unreg_rpi(phba, ndlp);
- ndlp->nlp_flag &= ~NLP_NPR_ADISC;
- }
- }
- }
lpfc_els_flush_rscn(phba);
spin_lock_irq(phba->host->host_lock);
phba->fc_flag |= FC_RSCN_MODE; /* we are still in RSCN mode */
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 41cf5d3..9766f90 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -30,7 +30,6 @@
/* worker thread events */
enum lpfc_work_type {
- LPFC_EVT_NODEV_TMO,
LPFC_EVT_ONLINE,
LPFC_EVT_OFFLINE,
LPFC_EVT_WARM_START,
@@ -74,11 +73,9 @@
#define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
- struct timer_list nlp_tmofunc; /* Used for nodev tmo */
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_hba *nlp_phba;
- struct lpfc_work_evt nodev_timeout_evt;
struct lpfc_work_evt els_retry_evt;
unsigned long last_ramp_up_time; /* jiffy of last ramp up */
unsigned long last_q_full_time; /* jiffy of last queue full */
@@ -102,7 +99,6 @@
#define NLP_LOGO_SND 0x100 /* sent LOGO request for this entry */
#define NLP_RNID_SND 0x400 /* sent RNID request for this entry */
#define NLP_ELS_SND_MASK 0x7e0 /* sent ELS request for this entry */
-#define NLP_NODEV_TMO 0x10000 /* nodev timeout is running for node */
#define NLP_DELAY_TMO 0x20000 /* delay timeout is running for node */
#define NLP_NPR_2B_DISC 0x40000 /* node is included in num_disc_nodes */
#define NLP_RCV_PLOGI 0x80000 /* Rcv'ed PLOGI from remote system */
@@ -169,7 +165,7 @@
*/
/*
* For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
- * lists will receive a DEVICE_RECOVERY event. If the linkdown or nodev timers
+ * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
* expire, all effected nodes will receive a DEVICE_RM event.
*/
/*
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 3567de61..71864cdc 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2506,6 +2506,7 @@
uint32_t *lp;
IOCB_t *icmd;
uint32_t payload_len, cmd;
+ int i;
icmd = &cmdiocb->iocb;
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
@@ -2524,6 +2525,10 @@
phba->brd_no,
phba->fc_flag, payload_len, *lp, phba->fc_rscn_id_cnt);
+ for (i = 0; i < payload_len/sizeof(uint32_t); i++)
+ fc_host_post_event(phba->host, fc_get_event_number(),
+ FCH_EVT_RSCN, lp[i]);
+
/* If we are about to begin discovery, just ACC the RSCN.
* Discovery processing will satisfy it.
*/
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index b2f1552..d586c3d 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -56,28 +56,63 @@
static void lpfc_disc_timeout_handler(struct lpfc_hba *);
-static void
-lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
+void
+lpfc_terminate_rport_io(struct fc_rport *rport)
{
- uint8_t *name = (uint8_t *)&ndlp->nlp_portname;
- int warn_on = 0;
+ struct lpfc_rport_data *rdata;
+ struct lpfc_nodelist * ndlp;
+ struct lpfc_hba *phba;
- spin_lock_irq(phba->host->host_lock);
- if (!(ndlp->nlp_flag & NLP_NODEV_TMO)) {
- spin_unlock_irq(phba->host->host_lock);
+ rdata = rport->dd_data;
+ ndlp = rdata->pnode;
+
+ if (!ndlp) {
+ if (rport->roles & FC_RPORT_ROLE_FCP_TARGET)
+ printk(KERN_ERR "Cannot find remote node"
+ " to terminate I/O Data x%x\n",
+ rport->port_id);
return;
}
- /*
- * If a discovery event readded nodev_timer after timer
- * firing and before processing the timer, cancel the
- * nlp_tmofunc.
- */
- spin_unlock_irq(phba->host->host_lock);
- del_timer_sync(&ndlp->nlp_tmofunc);
- spin_lock_irq(phba->host->host_lock);
+ phba = ndlp->nlp_phba;
- ndlp->nlp_flag &= ~NLP_NODEV_TMO;
+ spin_lock_irq(phba->host->host_lock);
+ if (ndlp->nlp_sid != NLP_NO_SID) {
+ lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
+ ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT);
+ }
+ spin_unlock_irq(phba->host->host_lock);
+
+ return;
+}
+
+/*
+ * This function will be called when dev_loss_tmo fire.
+ */
+void
+lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
+{
+ struct lpfc_rport_data *rdata;
+ struct lpfc_nodelist * ndlp;
+ uint8_t *name;
+ int warn_on = 0;
+ struct lpfc_hba *phba;
+
+ rdata = rport->dd_data;
+ ndlp = rdata->pnode;
+
+ if (!ndlp) {
+ if (rport->roles & FC_RPORT_ROLE_FCP_TARGET)
+ printk(KERN_ERR "Cannot find remote node"
+ " for rport in dev_loss_tmo_callbk x%x\n",
+ rport->port_id);
+ return;
+ }
+
+ name = (uint8_t *)&ndlp->nlp_portname;
+ phba = ndlp->nlp_phba;
+
+ spin_lock_irq(phba->host->host_lock);
if (ndlp->nlp_sid != NLP_NO_SID) {
warn_on = 1;
@@ -85,11 +120,14 @@
lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT);
}
+ if (phba->fc_flag & FC_UNLOADING)
+ warn_on = 0;
+
spin_unlock_irq(phba->host->host_lock);
if (warn_on) {
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "%d:0203 Nodev timeout on "
+ "%d:0203 Devloss timeout on "
"WWPN %x:%x:%x:%x:%x:%x:%x:%x "
"NPort x%x Data: x%x x%x x%x\n",
phba->brd_no,
@@ -99,7 +137,7 @@
ndlp->nlp_state, ndlp->nlp_rpi);
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
- "%d:0204 Nodev timeout on "
+ "%d:0204 Devloss timeout on "
"WWPN %x:%x:%x:%x:%x:%x:%x:%x "
"NPort x%x Data: x%x x%x x%x\n",
phba->brd_no,
@@ -109,7 +147,12 @@
ndlp->nlp_state, ndlp->nlp_rpi);
}
- lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM);
+ ndlp->rport = NULL;
+ rdata->pnode = NULL;
+
+ if (!(phba->fc_flag & FC_UNLOADING))
+ lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
return;
}
@@ -127,11 +170,6 @@
spin_unlock_irq(phba->host->host_lock);
free_evt = 1;
switch (evtp->evt) {
- case LPFC_EVT_NODEV_TMO:
- ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1);
- lpfc_process_nodev_timeout(phba, ndlp);
- free_evt = 0;
- break;
case LPFC_EVT_ELS_RETRY:
ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1);
lpfc_els_retry_delay_handler(ndlp);
@@ -340,6 +378,9 @@
spin_unlock_irq(phba->host->host_lock);
}
+ fc_host_post_event(phba->host, fc_get_event_number(),
+ FCH_EVT_LINKDOWN, 0);
+
/* Clean up any firmware default rpi's */
if ((mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))) {
lpfc_unreg_did(phba, 0xffffffff, mb);
@@ -374,16 +415,6 @@
rc = lpfc_disc_state_machine(phba, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
- /* Check config parameter use-adisc or FCP-2 */
- if ((rc != NLP_STE_FREED_NODE) &&
- (phba->cfg_use_adisc == 0) &&
- !(ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE)) {
- /* We know we will have to relogin, so
- * unreglogin the rpi right now to fail
- * any outstanding I/Os quickly.
- */
- lpfc_unreg_rpi(phba, ndlp);
- }
}
}
@@ -427,6 +458,9 @@
struct list_head *listp, *node_list[7];
int i;
+ fc_host_post_event(phba->host, fc_get_event_number(),
+ FCH_EVT_LINKUP, 0);
+
spin_lock_irq(phba->host->host_lock);
phba->hba_state = LPFC_LINK_UP;
phba->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY |
@@ -638,6 +672,8 @@
memcpy((uint8_t *) & phba->fc_sparam, (uint8_t *) mp->virt,
sizeof (struct serv_parm));
+ if (phba->cfg_soft_wwpn)
+ u64_to_wwn(phba->cfg_soft_wwpn, phba->fc_sparam.portName.u.wwn);
memcpy((uint8_t *) & phba->fc_nodename,
(uint8_t *) & phba->fc_sparam.nodeName,
sizeof (struct lpfc_name));
@@ -1098,8 +1134,11 @@
struct fc_rport *rport = ndlp->rport;
struct lpfc_rport_data *rdata = rport->dd_data;
- ndlp->rport = NULL;
- rdata->pnode = NULL;
+ if (rport->scsi_target_id == -1) {
+ ndlp->rport = NULL;
+ rdata->pnode = NULL;
+ }
+
fc_remote_port_delete(rport);
return;
@@ -1227,17 +1266,6 @@
list_add_tail(&nlp->nlp_listp, &phba->fc_nlpunmap_list);
phba->fc_unmap_cnt++;
phba->nport_event_cnt++;
- /* stop nodev tmo if running */
- if (nlp->nlp_flag & NLP_NODEV_TMO) {
- nlp->nlp_flag &= ~NLP_NODEV_TMO;
- spin_unlock_irq(phba->host->host_lock);
- del_timer_sync(&nlp->nlp_tmofunc);
- spin_lock_irq(phba->host->host_lock);
- if (!list_empty(&nlp->nodev_timeout_evt.evt_listp))
- list_del_init(&nlp->nodev_timeout_evt.
- evt_listp);
-
- }
nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
nlp->nlp_type |= NLP_FC_NODE;
break;
@@ -1248,17 +1276,6 @@
list_add_tail(&nlp->nlp_listp, &phba->fc_nlpmap_list);
phba->fc_map_cnt++;
phba->nport_event_cnt++;
- /* stop nodev tmo if running */
- if (nlp->nlp_flag & NLP_NODEV_TMO) {
- nlp->nlp_flag &= ~NLP_NODEV_TMO;
- spin_unlock_irq(phba->host->host_lock);
- del_timer_sync(&nlp->nlp_tmofunc);
- spin_lock_irq(phba->host->host_lock);
- if (!list_empty(&nlp->nodev_timeout_evt.evt_listp))
- list_del_init(&nlp->nodev_timeout_evt.
- evt_listp);
-
- }
nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
break;
case NLP_NPR_LIST:
@@ -1267,11 +1284,6 @@
list_add_tail(&nlp->nlp_listp, &phba->fc_npr_list);
phba->fc_npr_cnt++;
- if (!(nlp->nlp_flag & NLP_NODEV_TMO))
- mod_timer(&nlp->nlp_tmofunc,
- jiffies + HZ * phba->cfg_nodev_tmo);
-
- nlp->nlp_flag |= NLP_NODEV_TMO;
nlp->nlp_flag &= ~NLP_RCV_PLOGI;
break;
case NLP_JUST_DQ:
@@ -1301,7 +1313,8 @@
* already. If we have, and it's a scsi entity, be
* sure to unblock any attached scsi devices
*/
- if (!nlp->rport)
+ if ((!nlp->rport) || (nlp->rport->port_state ==
+ FC_PORTSTATE_BLOCKED))
lpfc_register_remote_port(phba, nlp);
/*
@@ -1575,15 +1588,12 @@
lpfc_els_abort(phba,ndlp,0);
spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~(NLP_NODEV_TMO|NLP_DELAY_TMO);
+ ndlp->nlp_flag &= ~NLP_DELAY_TMO;
spin_unlock_irq(phba->host->host_lock);
- del_timer_sync(&ndlp->nlp_tmofunc);
ndlp->nlp_last_elscmd = 0;
del_timer_sync(&ndlp->nlp_delayfunc);
- if (!list_empty(&ndlp->nodev_timeout_evt.evt_listp))
- list_del_init(&ndlp->nodev_timeout_evt.evt_listp);
if (!list_empty(&ndlp->els_retry_evt.evt_listp))
list_del_init(&ndlp->els_retry_evt.evt_listp);
@@ -1600,16 +1610,6 @@
int
lpfc_nlp_remove(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp)
{
- if (ndlp->nlp_flag & NLP_NODEV_TMO) {
- spin_lock_irq(phba->host->host_lock);
- ndlp->nlp_flag &= ~NLP_NODEV_TMO;
- spin_unlock_irq(phba->host->host_lock);
- del_timer_sync(&ndlp->nlp_tmofunc);
- if (!list_empty(&ndlp->nodev_timeout_evt.evt_listp))
- list_del_init(&ndlp->nodev_timeout_evt.evt_listp);
-
- }
-
if (ndlp->nlp_flag & NLP_DELAY_TMO) {
lpfc_cancel_retry_delay_tmo(phba, ndlp);
@@ -2424,34 +2424,6 @@
return;
}
-static void
-lpfc_nodev_timeout(unsigned long ptr)
-{
- struct lpfc_hba *phba;
- struct lpfc_nodelist *ndlp;
- unsigned long iflag;
- struct lpfc_work_evt *evtp;
-
- ndlp = (struct lpfc_nodelist *)ptr;
- phba = ndlp->nlp_phba;
- evtp = &ndlp->nodev_timeout_evt;
- spin_lock_irqsave(phba->host->host_lock, iflag);
-
- if (!list_empty(&evtp->evt_listp)) {
- spin_unlock_irqrestore(phba->host->host_lock, iflag);
- return;
- }
- evtp->evt_arg1 = ndlp;
- evtp->evt = LPFC_EVT_NODEV_TMO;
- list_add_tail(&evtp->evt_listp, &phba->work_list);
- if (phba->work_wait)
- wake_up(phba->work_wait);
-
- spin_unlock_irqrestore(phba->host->host_lock, iflag);
- return;
-}
-
-
/*
* This routine handles processing a NameServer REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
@@ -2575,11 +2547,7 @@
uint32_t did)
{
memset(ndlp, 0, sizeof (struct lpfc_nodelist));
- INIT_LIST_HEAD(&ndlp->nodev_timeout_evt.evt_listp);
INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
- init_timer(&ndlp->nlp_tmofunc);
- ndlp->nlp_tmofunc.function = lpfc_nodev_timeout;
- ndlp->nlp_tmofunc.data = (unsigned long)ndlp;
init_timer(&ndlp->nlp_delayfunc);
ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f6948ff..4cdf346 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -268,6 +268,8 @@
kfree(mp);
pmb->context1 = NULL;
+ if (phba->cfg_soft_wwpn)
+ u64_to_wwn(phba->cfg_soft_wwpn, phba->fc_sparam.portName.u.wwn);
memcpy(&phba->fc_nodename, &phba->fc_sparam.nodeName,
sizeof (struct lpfc_name));
memcpy(&phba->fc_portname, &phba->fc_sparam.portName,
@@ -511,6 +513,7 @@
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
+ uint32_t event_data;
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
@@ -555,6 +558,11 @@
phba->brd_no, phba->work_hs,
phba->work_status[0], phba->work_status[1]);
+ event_data = FC_REG_DUMP_EVENT;
+ fc_host_post_vendor_event(phba->host, fc_get_event_number(),
+ sizeof(event_data), (char *) &event_data,
+ SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
lpfc_offline(phba);
phba->hba_state = LPFC_HBA_ERROR;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 20449a8..d5f4150 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1813,7 +1813,7 @@
*/
/*
* For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
- * lists will receive a DEVICE_RECOVERY event. If the linkdown or nodev timers
+ * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
* expire, all effected nodes will receive a DEVICE_RM event.
*/
/*
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a8816a8..97ae98d 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -935,7 +935,7 @@
schedule_timeout_uninterruptible(LPFC_ABORT_WAIT*HZ);
spin_lock_irq(phba->host->host_lock);
if (++loop_count
- > (2 * phba->cfg_nodev_tmo)/LPFC_ABORT_WAIT)
+ > (2 * phba->cfg_devloss_tmo)/LPFC_ABORT_WAIT)
break;
}
@@ -978,7 +978,7 @@
spin_lock_irq(shost->host_lock);
/*
* If target is not in a MAPPED state, delay the reset until
- * target is rediscovered or nodev timeout expires.
+ * target is rediscovered or devloss timeout expires.
*/
while ( 1 ) {
if (!pnode)
@@ -1050,7 +1050,7 @@
spin_lock_irq(phba->host->host_lock);
if (++loopcnt
- > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
+ > (2 * phba->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
cnt = lpfc_sli_sum_iocb(phba,
@@ -1151,7 +1151,7 @@
spin_lock_irq(phba->host->host_lock);
if (++loopcnt
- > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT)
+ > (2 * phba->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
cnt = lpfc_sli_sum_iocb(phba,
@@ -1249,7 +1249,7 @@
* target pointer is stored in the starget_data for the
* driver's sysfs entry point functions.
*/
- rport->dev_loss_tmo = phba->cfg_nodev_tmo + 5;
+ rport->dev_loss_tmo = phba->cfg_devloss_tmo;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
lpfc_sli_poll_fcp_ring(phba);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c7091ea..ac41790 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.1.9"
+#define LPFC_DRIVER_VERSION "8.1.10"
#define LPFC_DRIVER_NAME "lpfc"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 76edbb6..b87bef6 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -2822,9 +2822,7 @@
i = scsi_inq[0] & 0x1f;
- len += sprintf(page+len, " Type: %s ",
- i < MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] :
- "Unknown ");
+ len += sprintf(page+len, " Type: %s ", scsi_device_type(i));
len += sprintf(page+len,
" ANSI SCSI revision: %02x", scsi_inq[2] & 0x07);
@@ -3658,8 +3656,9 @@
* Send the request sense data also, irrespective of
* whether the user has asked for it or not.
*/
- copy_to_user(upthru->reqsensearea,
- pthru->reqsensearea, 14);
+ if (copy_to_user(upthru->reqsensearea,
+ pthru->reqsensearea, 14))
+ rval = -EFAULT;
freemem_and_return:
if( pthru->dataxferlen ) {
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index cd982c8..266b391 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -330,6 +330,21 @@
NULL,
};
+/**
+ * megaraid_change_queue_depth - Change the device's queue depth
+ * @sdev: scsi device struct
+ * @qdepth: depth to set
+ *
+ * Return value:
+ * actual depth set
+ **/
+static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+ if (qdepth > MBOX_MAX_SCSI_CMDS)
+ qdepth = MBOX_MAX_SCSI_CMDS;
+ scsi_adjust_queue_depth(sdev, 0, qdepth);
+ return sdev->queue_depth;
+}
/*
* Scsi host template for megaraid unified driver
@@ -343,6 +358,7 @@
.eh_device_reset_handler = megaraid_reset_handler,
.eh_bus_reset_handler = megaraid_reset_handler,
.eh_host_reset_handler = megaraid_reset_handler,
+ .change_queue_depth = megaraid_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
.sdev_attrs = megaraid_sdev_attrs,
.shost_attrs = megaraid_shost_attrs,
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index a8c9627..4cab5b5 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -53,31 +53,15 @@
*/
static struct pci_device_id megasas_pci_table[] = {
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1064R, /* xscale IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1078R, /* ppc IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_VERDE_ZCR, /* xscale IOP, vega */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {
- PCI_VENDOR_ID_DELL,
- PCI_DEVICE_ID_DELL_PERC5, /* xscale IOP */
- PCI_ANY_ID,
- PCI_ANY_ID,
- },
- {0} /* Terminating entry */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
+ /* xscale IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
+ /* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
+ /* xscale IOP, vega */
+ {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
+ /* xscale IOP */
+ {}
};
MODULE_DEVICE_TABLE(pci, megasas_pci_table);
@@ -2854,7 +2838,7 @@
/*
* Register ourselves as PCI hotplug module
*/
- rval = pci_module_init(&megasas_pci_driver);
+ rval = pci_register_driver(&megasas_pci_driver);
if (rval) {
printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index cb367c2..9b991b7 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -29,7 +29,7 @@
return IRQ_HANDLED;
}
-static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
unsigned char flags = 0x01;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -57,7 +57,7 @@
return 0;
}
-static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
m147_pcc->dma_cntrl = 0;
@@ -112,7 +112,7 @@
return 0;
}
-static int mvme147_bus_reset(Scsi_Cmnd *cmd)
+static int mvme147_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h
index 2f56d69..32aee854 100644
--- a/drivers/scsi/mvme147.h
+++ b/drivers/scsi/mvme147.h
@@ -12,10 +12,6 @@
int mvme147_detect(struct scsi_host_template *);
int mvme147_release(struct Scsi_Host *);
-const char *wd33c93_info(void);
-int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int wd33c93_abort(Scsi_Cmnd *);
-int wd33c93_reset(Scsi_Cmnd *, unsigned int);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index b332cad..c51b576 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -96,24 +96,40 @@
EXPORT_SYMBOL(scsi_logging_level);
#endif
-const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = {
- "Direct-Access ",
- "Sequential-Access",
+static const char *const scsi_device_types[] = {
+ "Direct access ",
+ "Sequential access",
"Printer ",
"Processor ",
"WORM ",
- "CD-ROM ",
+ "CD/DVD ",
"Scanner ",
- "Optical Device ",
- "Medium Changer ",
+ "Optical memory ",
+ "Media changer ",
"Communications ",
- "Unknown ",
- "Unknown ",
+ "ASC IT8 ",
+ "ASC IT8 ",
"RAID ",
"Enclosure ",
- "Direct-Access-RBC",
+ "Direct access RBC",
+ "Optical card ",
+ "Bridge controller",
+ "Object storage ",
+ "Automation/Drive ",
};
-EXPORT_SYMBOL(scsi_device_types);
+
+const char * scsi_device_type(unsigned type)
+{
+ if (type == 0x1e)
+ return "Well-known LUN ";
+ if (type == 0x1f)
+ return "No Device ";
+ if (type > ARRAY_SIZE(scsi_device_types))
+ return "Unknown ";
+ return scsi_device_types[type];
+}
+
+EXPORT_SYMBOL(scsi_device_type);
struct scsi_host_cmd_pool {
kmem_cache_t *slab;
@@ -835,14 +851,14 @@
*/
int scsi_device_get(struct scsi_device *sdev)
{
- if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL)
+ if (sdev->sdev_state == SDEV_DEL)
return -ENXIO;
if (!get_device(&sdev->sdev_gendev))
return -ENXIO;
- if (!try_module_get(sdev->host->hostt->module)) {
- put_device(&sdev->sdev_gendev);
- return -ENXIO;
- }
+ /* We can fail this if we're doing SCSI operations
+ * from module exit (like cache flush) */
+ try_module_get(sdev->host->hostt->module);
+
return 0;
}
EXPORT_SYMBOL(scsi_device_get);
@@ -857,7 +873,14 @@
*/
void scsi_device_put(struct scsi_device *sdev)
{
- module_put(sdev->host->hostt->module);
+ struct module *module = sdev->host->hostt->module;
+
+#ifdef CONFIG_MODULE_UNLOAD
+ /* The module refcount will be zero if scsi_device_get()
+ * was called from a module removal routine */
+ if (module && module_refcount(module) != 0)
+ module_put(module);
+#endif
put_device(&sdev->sdev_gendev);
}
EXPORT_SYMBOL(scsi_device_put);
@@ -1099,6 +1122,8 @@
for_each_possible_cpu(i)
INIT_LIST_HEAD(&per_cpu(scsi_done_q, i));
+ scsi_netlink_init();
+
printk(KERN_NOTICE "SCSI subsystem initialized\n");
return 0;
@@ -1119,6 +1144,7 @@
static void __exit exit_scsi(void)
{
+ scsi_netlink_exit();
scsi_sysfs_unregister();
scsi_exit_sysctl();
scsi_exit_hosts();
diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h
index f51e466..d5a55fa 100644
--- a/drivers/scsi/scsi.h
+++ b/drivers/scsi/scsi.h
@@ -20,8 +20,6 @@
#ifndef _SCSI_H
#define _SCSI_H
-#include <linux/config.h> /* for CONFIG_SCSI_LOGGING */
-
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index a80303c..9c0f358 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1,5 +1,4 @@
/*
- * linux/kernel/scsi_debug.c
* vvvvvvvvvvvvvvvvvvvvvvv Original vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
* Copyright (C) 1992 Eric Youngdale
* Simulate a host adapter with 2 disks attached. Do a lot of checking
@@ -8,7 +7,9 @@
* ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* This version is more generic, simulating a variable number of disk
- * (or disk like devices) sharing a common amount of RAM
+ * (or disk like devices) sharing a common amount of RAM. To be more
+ * realistic, the simulated devices have the transport attributes of
+ * SAS disks.
*
*
* For documentation see http://www.torque.net/sg/sdebug26.html
@@ -50,8 +51,8 @@
#include "scsi_logging.h"
#include "scsi_debug.h"
-#define SCSI_DEBUG_VERSION "1.79"
-static const char * scsi_debug_version_date = "20060604";
+#define SCSI_DEBUG_VERSION "1.80"
+static const char * scsi_debug_version_date = "20060914";
/* Additional Sense Code (ASC) used */
#define NO_ADDITIONAL_SENSE 0x0
@@ -86,6 +87,8 @@
#define DEF_D_SENSE 0
#define DEF_NO_LUN_0 0
#define DEF_VIRTUAL_GB 0
+#define DEF_FAKE_RW 0
+#define DEF_VPD_USE_HOSTNO 1
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
@@ -127,6 +130,8 @@
static int scsi_debug_dsense = DEF_D_SENSE;
static int scsi_debug_no_lun_0 = DEF_NO_LUN_0;
static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB;
+static int scsi_debug_fake_rw = DEF_FAKE_RW;
+static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
static int scsi_debug_cmnd_count = 0;
@@ -423,6 +428,8 @@
case READ_6:
if ((errsts = check_readiness(SCpnt, 0, devip)))
break;
+ if (scsi_debug_fake_rw)
+ break;
if ((*cmd) == READ_16) {
for (lba = 0, j = 0; j < 8; ++j) {
if (j > 0)
@@ -465,6 +472,8 @@
case WRITE_6:
if ((errsts = check_readiness(SCpnt, 0, devip)))
break;
+ if (scsi_debug_fake_rw)
+ break;
if ((*cmd) == WRITE_16) {
for (lba = 0, j = 0; j < 8; ++j) {
if (j > 0)
@@ -941,6 +950,8 @@
char lu_id_str[6];
int host_no = devip->sdbg_host->shost->host_no;
+ if (0 == scsi_debug_vpd_use_hostno)
+ host_no = 0;
lu_id_num = devip->wlun ? -1 : (((host_no + 1) * 2000) +
(devip->target * 1000) + devip->lun);
target_dev_id = ((host_no + 1) * 2000) +
@@ -1059,19 +1070,6 @@
arr[12] = THRESHOLD_EXCEEDED;
arr[13] = 0xff; /* TEST set and MRIE==6 */
}
- } else if (devip->stopped) {
- if (want_dsense) {
- arr[0] = 0x72;
- arr[1] = 0x0; /* NO_SENSE in sense_key */
- arr[2] = LOW_POWER_COND_ON;
- arr[3] = 0x0; /* TEST set and MRIE==6 */
- } else {
- arr[0] = 0x70;
- arr[2] = 0x0; /* NO_SENSE in sense_key */
- arr[7] = 0xa; /* 18 byte sense buffer */
- arr[12] = LOW_POWER_COND_ON;
- arr[13] = 0x0; /* TEST set and MRIE==6 */
- }
} else {
memcpy(arr, sbuff, SDEBUG_SENSE_LEN);
if ((cmd[1] & 1) && (! scsi_debug_dsense)) {
@@ -1325,21 +1323,26 @@
static int resp_mode_sense(struct scsi_cmnd * scp, int target,
struct sdebug_dev_info * devip)
{
- unsigned char dbd;
- int pcontrol, pcode, subpcode;
+ unsigned char dbd, llbaa;
+ int pcontrol, pcode, subpcode, bd_len;
unsigned char dev_spec;
- int alloc_len, msense_6, offset, len, errsts, target_dev_id;
+ int k, alloc_len, msense_6, offset, len, errsts, target_dev_id;
unsigned char * ap;
unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
unsigned char *cmd = (unsigned char *)scp->cmnd;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
- dbd = cmd[1] & 0x8;
+ dbd = !!(cmd[1] & 0x8);
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3];
msense_6 = (MODE_SENSE == cmd[0]);
+ llbaa = msense_6 ? 0 : !!(cmd[1] & 0x10);
+ if ((0 == scsi_debug_ptype) && (0 == dbd))
+ bd_len = llbaa ? 16 : 8;
+ else
+ bd_len = 0;
alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]);
memset(arr, 0, SDEBUG_MAX_MSENSE_SZ);
if (0x3 == pcontrol) { /* Saving values not supported */
@@ -1349,15 +1352,58 @@
}
target_dev_id = ((devip->sdbg_host->shost->host_no + 1) * 2000) +
(devip->target * 1000) - 3;
- dev_spec = DEV_READONLY(target) ? 0x80 : 0x0;
+ /* set DPOFUA bit for disks */
+ if (0 == scsi_debug_ptype)
+ dev_spec = (DEV_READONLY(target) ? 0x80 : 0x0) | 0x10;
+ else
+ dev_spec = 0x0;
if (msense_6) {
arr[2] = dev_spec;
+ arr[3] = bd_len;
offset = 4;
} else {
arr[3] = dev_spec;
+ if (16 == bd_len)
+ arr[4] = 0x1; /* set LONGLBA bit */
+ arr[7] = bd_len; /* assume 255 or less */
offset = 8;
}
ap = arr + offset;
+ if ((bd_len > 0) && (0 == sdebug_capacity)) {
+ if (scsi_debug_virtual_gb > 0) {
+ sdebug_capacity = 2048 * 1024;
+ sdebug_capacity *= scsi_debug_virtual_gb;
+ } else
+ sdebug_capacity = sdebug_store_sectors;
+ }
+ if (8 == bd_len) {
+ if (sdebug_capacity > 0xfffffffe) {
+ ap[0] = 0xff;
+ ap[1] = 0xff;
+ ap[2] = 0xff;
+ ap[3] = 0xff;
+ } else {
+ ap[0] = (sdebug_capacity >> 24) & 0xff;
+ ap[1] = (sdebug_capacity >> 16) & 0xff;
+ ap[2] = (sdebug_capacity >> 8) & 0xff;
+ ap[3] = sdebug_capacity & 0xff;
+ }
+ ap[6] = (SECT_SIZE_PER(target) >> 8) & 0xff;
+ ap[7] = SECT_SIZE_PER(target) & 0xff;
+ offset += bd_len;
+ ap = arr + offset;
+ } else if (16 == bd_len) {
+ unsigned long long capac = sdebug_capacity;
+
+ for (k = 0; k < 8; ++k, capac >>= 8)
+ ap[7 - k] = capac & 0xff;
+ ap[12] = (SECT_SIZE_PER(target) >> 24) & 0xff;
+ ap[13] = (SECT_SIZE_PER(target) >> 16) & 0xff;
+ ap[14] = (SECT_SIZE_PER(target) >> 8) & 0xff;
+ ap[15] = SECT_SIZE_PER(target) & 0xff;
+ offset += bd_len;
+ ap = arr + offset;
+ }
if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
/* TODO: Control Extension page */
@@ -1471,7 +1517,7 @@
" IO sent=%d bytes\n", param_len, res);
md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2);
bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]);
- if ((md_len > 2) || (0 != bd_len)) {
+ if (md_len > 2) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_PARAM_LIST, 0);
return check_condition_result;
@@ -1544,7 +1590,7 @@
static int resp_log_sense(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
- int ppc, sp, pcontrol, pcode, alloc_len, errsts, len, n;
+ int ppc, sp, pcontrol, pcode, subpcode, alloc_len, errsts, len, n;
unsigned char arr[SDEBUG_MAX_LSENSE_SZ];
unsigned char *cmd = (unsigned char *)scp->cmnd;
@@ -1560,23 +1606,63 @@
}
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
+ subpcode = cmd[3] & 0xff;
alloc_len = (cmd[7] << 8) + cmd[8];
arr[0] = pcode;
- switch (pcode) {
- case 0x0: /* Supported log pages log page */
- n = 4;
- arr[n++] = 0x0; /* this page */
- arr[n++] = 0xd; /* Temperature */
- arr[n++] = 0x2f; /* Informational exceptions */
- arr[3] = n - 4;
- break;
- case 0xd: /* Temperature log page */
- arr[3] = resp_temp_l_pg(arr + 4);
- break;
- case 0x2f: /* Informational exceptions log page */
- arr[3] = resp_ie_l_pg(arr + 4);
- break;
- default:
+ if (0 == subpcode) {
+ switch (pcode) {
+ case 0x0: /* Supported log pages log page */
+ n = 4;
+ arr[n++] = 0x0; /* this page */
+ arr[n++] = 0xd; /* Temperature */
+ arr[n++] = 0x2f; /* Informational exceptions */
+ arr[3] = n - 4;
+ break;
+ case 0xd: /* Temperature log page */
+ arr[3] = resp_temp_l_pg(arr + 4);
+ break;
+ case 0x2f: /* Informational exceptions log page */
+ arr[3] = resp_ie_l_pg(arr + 4);
+ break;
+ default:
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_FIELD_IN_CDB, 0);
+ return check_condition_result;
+ }
+ } else if (0xff == subpcode) {
+ arr[0] |= 0x40;
+ arr[1] = subpcode;
+ switch (pcode) {
+ case 0x0: /* Supported log pages and subpages log page */
+ n = 4;
+ arr[n++] = 0x0;
+ arr[n++] = 0x0; /* 0,0 page */
+ arr[n++] = 0x0;
+ arr[n++] = 0xff; /* this page */
+ arr[n++] = 0xd;
+ arr[n++] = 0x0; /* Temperature */
+ arr[n++] = 0x2f;
+ arr[n++] = 0x0; /* Informational exceptions */
+ arr[3] = n - 4;
+ break;
+ case 0xd: /* Temperature subpages */
+ n = 4;
+ arr[n++] = 0xd;
+ arr[n++] = 0x0; /* Temperature */
+ arr[3] = n - 4;
+ break;
+ case 0x2f: /* Informational exceptions subpages */
+ n = 4;
+ arr[n++] = 0x2f;
+ arr[n++] = 0x0; /* Informational exceptions */
+ arr[3] = n - 4;
+ break;
+ default:
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_FIELD_IN_CDB, 0);
+ return check_condition_result;
+ }
+ } else {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
@@ -2151,11 +2237,18 @@
}
}
+/* Note: The following macros create attribute files in the
+ /sys/module/scsi_debug/parameters directory. Unfortunately this
+ driver is unaware of a change and cannot trigger auxiliary actions
+ as it can when the corresponding attribute in the
+ /sys/bus/pseudo/drivers/scsi_debug directory is changed.
+ */
module_param_named(add_host, scsi_debug_add_host, int, S_IRUGO | S_IWUSR);
module_param_named(delay, scsi_debug_delay, int, S_IRUGO | S_IWUSR);
module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, S_IRUGO);
module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR);
module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR);
+module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR);
module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO);
@@ -2164,6 +2257,8 @@
module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR);
module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR);
+module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int,
+ S_IRUGO | S_IWUSR);
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
@@ -2175,6 +2270,7 @@
MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs(def=8)");
MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)");
MODULE_PARM_DESC(every_nth, "timeout every nth command(def=100)");
+MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
@@ -2183,6 +2279,7 @@
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
+MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
static char sdebug_info[256];
@@ -2334,6 +2431,24 @@
DRIVER_ATTR(dsense, S_IRUGO | S_IWUSR, sdebug_dsense_show,
sdebug_dsense_store);
+static ssize_t sdebug_fake_rw_show(struct device_driver * ddp, char * buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_fake_rw);
+}
+static ssize_t sdebug_fake_rw_store(struct device_driver * ddp,
+ const char * buf, size_t count)
+{
+ int n;
+
+ if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ scsi_debug_fake_rw = n;
+ return count;
+ }
+ return -EINVAL;
+}
+DRIVER_ATTR(fake_rw, S_IRUGO | S_IWUSR, sdebug_fake_rw_show,
+ sdebug_fake_rw_store);
+
static ssize_t sdebug_no_lun_0_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_lun_0);
@@ -2487,6 +2602,31 @@
DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show,
sdebug_add_host_store);
+static ssize_t sdebug_vpd_use_hostno_show(struct device_driver * ddp,
+ char * buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_vpd_use_hostno);
+}
+static ssize_t sdebug_vpd_use_hostno_store(struct device_driver * ddp,
+ const char * buf, size_t count)
+{
+ int n;
+
+ if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ scsi_debug_vpd_use_hostno = n;
+ return count;
+ }
+ return -EINVAL;
+}
+DRIVER_ATTR(vpd_use_hostno, S_IRUGO | S_IWUSR, sdebug_vpd_use_hostno_show,
+ sdebug_vpd_use_hostno_store);
+
+/* Note: The following function creates attribute files in the
+ /sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
+ files (over those found in the /sys/module/scsi_debug/parameters
+ directory) is that auxiliary actions can be triggered when an attribute
+ is changed. For example see: sdebug_add_host_store() above.
+ */
static int do_create_driverfs_files(void)
{
int ret;
@@ -2496,23 +2636,31 @@
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_fake_rw);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
- ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno);
return ret;
}
static void do_remove_driverfs_files(void)
{
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno);
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_opts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ptype);
- driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_fake_rw);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dsense);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 077c1c6..d6743b9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -551,7 +551,15 @@
list_del_init(&sdev->starved_entry);
spin_unlock_irqrestore(shost->host_lock, flags);
- blk_run_queue(sdev->request_queue);
+
+ if (test_bit(QUEUE_FLAG_REENTER, &q->queue_flags) &&
+ !test_and_set_bit(QUEUE_FLAG_REENTER,
+ &sdev->request_queue->queue_flags)) {
+ blk_run_queue(sdev->request_queue);
+ clear_bit(QUEUE_FLAG_REENTER,
+ &sdev->request_queue->queue_flags);
+ } else
+ blk_run_queue(sdev->request_queue);
spin_lock_irqsave(shost->host_lock, flags);
if (unlikely(!list_empty(&sdev->starved_entry)))
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
new file mode 100644
index 0000000..1b59b27
--- /dev/null
+++ b/drivers/scsi/scsi_netlink.c
@@ -0,0 +1,199 @@
+/*
+ * scsi_netlink.c - SCSI Transport Netlink Interface
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/security.h>
+#include <net/sock.h>
+#include <net/netlink.h>
+
+#include <scsi/scsi_netlink.h>
+#include "scsi_priv.h"
+
+struct sock *scsi_nl_sock = NULL;
+EXPORT_SYMBOL_GPL(scsi_nl_sock);
+
+
+/**
+ * scsi_nl_rcv_msg -
+ * Receive message handler. Extracts message from a receive buffer.
+ * Validates message header and calls appropriate transport message handler
+ *
+ * @skb: socket receive buffer
+ *
+ **/
+static void
+scsi_nl_rcv_msg(struct sk_buff *skb)
+{
+ struct nlmsghdr *nlh;
+ struct scsi_nl_hdr *hdr;
+ uint32_t rlen;
+ int err;
+
+ while (skb->len >= NLMSG_SPACE(0)) {
+ err = 0;
+
+ nlh = (struct nlmsghdr *) skb->data;
+ if ((nlh->nlmsg_len < (sizeof(*nlh) + sizeof(*hdr))) ||
+ (skb->len < nlh->nlmsg_len)) {
+ printk(KERN_WARNING "%s: discarding partial skb\n",
+ __FUNCTION__);
+ return;
+ }
+
+ rlen = NLMSG_ALIGN(nlh->nlmsg_len);
+ if (rlen > skb->len)
+ rlen = skb->len;
+
+ if (nlh->nlmsg_type != SCSI_TRANSPORT_MSG) {
+ err = -EBADMSG;
+ goto next_msg;
+ }
+
+ hdr = NLMSG_DATA(nlh);
+ if ((hdr->version != SCSI_NL_VERSION) ||
+ (hdr->magic != SCSI_NL_MAGIC)) {
+ err = -EPROTOTYPE;
+ goto next_msg;
+ }
+
+ if (security_netlink_recv(skb, CAP_SYS_ADMIN)) {
+ err = -EPERM;
+ goto next_msg;
+ }
+
+ if (nlh->nlmsg_len < (sizeof(*nlh) + hdr->msglen)) {
+ printk(KERN_WARNING "%s: discarding partial message\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /*
+ * We currently don't support anyone sending us a message
+ */
+
+next_msg:
+ if ((err) || (nlh->nlmsg_flags & NLM_F_ACK))
+ netlink_ack(skb, nlh, err);
+
+ skb_pull(skb, rlen);
+ }
+}
+
+
+/**
+ * scsi_nl_rcv_msg -
+ * Receive handler for a socket. Extracts a received message buffer from
+ * the socket, and starts message processing.
+ *
+ * @sk: socket
+ * @len: unused
+ *
+ **/
+static void
+scsi_nl_rcv(struct sock *sk, int len)
+{
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
+ scsi_nl_rcv_msg(skb);
+ kfree_skb(skb);
+ }
+}
+
+
+/**
+ * scsi_nl_rcv_event -
+ * Event handler for a netlink socket.
+ *
+ * @this: event notifier block
+ * @event: event type
+ * @ptr: event payload
+ *
+ **/
+static int
+scsi_nl_rcv_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+ struct netlink_notify *n = ptr;
+
+ if (n->protocol != NETLINK_SCSITRANSPORT)
+ return NOTIFY_DONE;
+
+ /*
+ * Currently, we are not tracking PID's, etc. There is nothing
+ * to handle.
+ */
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block scsi_netlink_notifier = {
+ .notifier_call = scsi_nl_rcv_event,
+};
+
+
+/**
+ * scsi_netlink_init -
+ * Called by SCSI subsystem to intialize the SCSI transport netlink
+ * interface
+ *
+ **/
+void
+scsi_netlink_init(void)
+{
+ int error;
+
+ error = netlink_register_notifier(&scsi_netlink_notifier);
+ if (error) {
+ printk(KERN_ERR "%s: register of event handler failed - %d\n",
+ __FUNCTION__, error);
+ return;
+ }
+
+ scsi_nl_sock = netlink_kernel_create(NETLINK_SCSITRANSPORT,
+ SCSI_NL_GRP_CNT, scsi_nl_rcv, THIS_MODULE);
+ if (!scsi_nl_sock) {
+ printk(KERN_ERR "%s: register of recieve handler failed\n",
+ __FUNCTION__);
+ netlink_unregister_notifier(&scsi_netlink_notifier);
+ }
+
+ return;
+}
+
+
+/**
+ * scsi_netlink_exit -
+ * Called by SCSI subsystem to disable the SCSI transport netlink
+ * interface
+ *
+ **/
+void
+scsi_netlink_exit(void)
+{
+ if (scsi_nl_sock) {
+ sock_release(scsi_nl_sock->sk_socket);
+ netlink_unregister_notifier(&scsi_netlink_notifier);
+ }
+
+ return;
+}
+
+
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index ae24c85..5d023d4 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -8,6 +8,7 @@
struct scsi_device;
struct scsi_host_template;
struct Scsi_Host;
+struct scsi_nl_hdr;
/*
@@ -110,6 +111,16 @@
extern struct bus_type scsi_bus_type;
+/* scsi_netlink.c */
+#ifdef CONFIG_SCSI_NETLINK
+extern void scsi_netlink_init(void);
+extern void scsi_netlink_exit(void);
+extern struct sock *scsi_nl_sock;
+#else
+static inline void scsi_netlink_init(void) {}
+static inline void scsi_netlink_exit(void) {}
+#endif
+
/*
* internal scsi timeout functions: for use by mid-layer and transport
* classes.
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 55200e4..524a5f7 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -178,9 +178,7 @@
seq_printf(s, "\n");
- seq_printf(s, " Type: %s ",
- sdev->type < MAX_SCSI_DEVICE_CODE ?
- scsi_device_types[(int) sdev->type] : "Unknown ");
+ seq_printf(s, " Type: %s ", scsi_device_type(sdev->type));
seq_printf(s, " ANSI"
" SCSI revision: %02x", (sdev->scsi_level - 1) ?
sdev->scsi_level - 1 : 1);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 1bd92b9..fd9e281 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -134,59 +134,6 @@
}
/**
- * print_inquiry - printk the inquiry information
- * @inq_result: printk this SCSI INQUIRY
- *
- * Description:
- * printk the vendor, model, and other information found in the
- * INQUIRY data in @inq_result.
- *
- * Notes:
- * Remove this, and replace with a hotplug event that logs any
- * relevant information.
- **/
-static void print_inquiry(unsigned char *inq_result)
-{
- int i;
-
- printk(KERN_NOTICE " Vendor: ");
- for (i = 8; i < 16; i++)
- if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
- printk("%c", inq_result[i]);
- else
- printk(" ");
-
- printk(" Model: ");
- for (i = 16; i < 32; i++)
- if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
- printk("%c", inq_result[i]);
- else
- printk(" ");
-
- printk(" Rev: ");
- for (i = 32; i < 36; i++)
- if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
- printk("%c", inq_result[i]);
- else
- printk(" ");
-
- printk("\n");
-
- i = inq_result[0] & 0x1f;
-
- printk(KERN_NOTICE " Type: %s ",
- i <
- MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] :
- "Unknown ");
- printk(" ANSI SCSI revision: %02x",
- inq_result[2] & 0x07);
- if ((inq_result[2] & 0x07) == 1 && (inq_result[3] & 0x0f) == 1)
- printk(" CCS\n");
- else
- printk("\n");
-}
-
-/**
* scsi_alloc_sdev - allocate and setup a scsi_Device
*
* Description:
@@ -319,6 +266,18 @@
return found_starget;
}
+/**
+ * scsi_alloc_target - allocate a new or find an existing target
+ * @parent: parent of the target (need not be a scsi host)
+ * @channel: target channel number (zero if no channels)
+ * @id: target id number
+ *
+ * Return an existing target if one exists, provided it hasn't already
+ * gone into STARGET_DEL state, otherwise allocate a new target.
+ *
+ * The target is returned with an incremented reference, so the caller
+ * is responsible for both reaping and doing a last put
+ */
static struct scsi_target *scsi_alloc_target(struct device *parent,
int channel, uint id)
{
@@ -384,14 +343,15 @@
return NULL;
}
}
+ get_device(dev);
return starget;
found:
found_target->reap_ref++;
spin_unlock_irqrestore(shost->host_lock, flags);
- put_device(parent);
if (found_target->state != STARGET_DEL) {
+ put_device(parent);
kfree(starget);
return found_target;
}
@@ -450,6 +410,32 @@
}
/**
+ * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string
+ * @s: INQUIRY result string to sanitize
+ * @len: length of the string
+ *
+ * Description:
+ * The SCSI spec says that INQUIRY vendor, product, and revision
+ * strings must consist entirely of graphic ASCII characters,
+ * padded on the right with spaces. Since not all devices obey
+ * this rule, we will replace non-graphic or non-ASCII characters
+ * with spaces. Exception: a NUL character is interpreted as a
+ * string terminator, so all the following characters are set to
+ * spaces.
+ **/
+static void sanitize_inquiry_string(unsigned char *s, int len)
+{
+ int terminated = 0;
+
+ for (; len > 0; (--len, ++s)) {
+ if (*s == 0)
+ terminated = 1;
+ if (terminated || *s < 0x20 || *s > 0x7e)
+ *s = ' ';
+ }
+}
+
+/**
* scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
* @sdev: scsi_device to probe
* @inq_result: area to store the INQUIRY result
@@ -463,7 +449,7 @@
* INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
* are copied to the scsi_device any flags value is stored in *@bflags.
**/
-static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result,
+static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
int result_len, int *bflags)
{
unsigned char scsi_cmd[MAX_COMMAND_SIZE];
@@ -522,7 +508,11 @@
}
if (result == 0) {
- response_len = (unsigned char) inq_result[4] + 5;
+ sanitize_inquiry_string(&inq_result[8], 8);
+ sanitize_inquiry_string(&inq_result[16], 16);
+ sanitize_inquiry_string(&inq_result[32], 4);
+
+ response_len = inq_result[4] + 5;
if (response_len > 255)
response_len = first_inquiry_len; /* sanity */
@@ -628,7 +618,8 @@
* SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
* SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
**/
-static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
+static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
+ int *bflags)
{
/*
* XXX do not save the inquiry, since it can change underneath us,
@@ -653,9 +644,8 @@
if (*bflags & BLIST_ISROM) {
/*
* It would be better to modify sdev->type, and set
- * sdev->removable, but then the print_inquiry() output
- * would not show TYPE_ROM; if print_inquiry() is removed
- * the issue goes away.
+ * sdev->removable; this can now be done since
+ * print_inquiry has gone away.
*/
inq_result[0] = TYPE_ROM;
inq_result[1] |= 0x80; /* removable */
@@ -684,8 +674,6 @@
printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
}
- print_inquiry(inq_result);
-
/*
* For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
* spec says: The device server is capable of supporting the
@@ -715,6 +703,12 @@
if (inq_result[7] & 0x10)
sdev->sdtr = 1;
+ sdev_printk(KERN_NOTICE, sdev, "%s %.8s %.16s %.4s PQ: %d "
+ "ANSI: %d%s\n", scsi_device_type(sdev->type),
+ sdev->vendor, sdev->model, sdev->rev,
+ sdev->inq_periph_qual, inq_result[2] & 0x07,
+ (inq_result[3] & 0x0f) == 1 ? " CCS" : "");
+
/*
* End sysfs code.
*/
@@ -943,11 +937,26 @@
}
/*
- * Non-standard SCSI targets may set the PDT to 0x1f (unknown or
- * no device type) instead of using the Peripheral Qualifier to
- * indicate that no LUN is present. For example, USB UFI does this.
+ * Some targets may set slight variations of PQ and PDT to signal
+ * that no LUN is present, so don't add sdev in these cases.
+ * Two specific examples are:
+ * 1) NetApp targets: return PQ=1, PDT=0x1f
+ * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved"
+ * in the UFI 1.0 spec (we cannot rely on reserved bits).
+ *
+ * References:
+ * 1) SCSI SPC-3, pp. 145-146
+ * PQ=1: "A peripheral device having the specified peripheral
+ * device type is not connected to this logical unit. However, the
+ * device server is capable of supporting the specified peripheral
+ * device type on this logical unit."
+ * PDT=0x1f: "Unknown or no device type"
+ * 2) USB UFI 1.0, p. 20
+ * PDT=00h Direct-access device (floppy)
+ * PDT=1Fh none (no FDD connected to the requested logical unit)
*/
- if (starget->pdt_1f_for_no_lun && (result[0] & 0x1f) == 0x1f) {
+ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
+ (result[0] & 0x1f) == 0x1f) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: peripheral device type"
" of 31, no device added\n"));
@@ -1345,7 +1354,6 @@
if (!starget)
return ERR_PTR(-ENOMEM);
- get_device(&starget->dev);
mutex_lock(&shost->scan_mutex);
if (scsi_host_scan_allowed(shost))
scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
@@ -1404,7 +1412,6 @@
if (!starget)
return;
- get_device(&starget->dev);
if (lun != SCAN_WILD_CARD) {
/*
* Scan for a specific host/chan/id/lun.
@@ -1586,7 +1593,8 @@
if (sdev) {
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->borken = 0;
- }
+ } else
+ scsi_target_reap(starget);
put_device(&starget->dev);
out:
mutex_unlock(&shost->scan_mutex);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index b03aa85..4ab176e 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -32,6 +32,9 @@
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_cmnd.h>
+#include <linux/netlink.h>
+#include <net/netlink.h>
+#include <scsi/scsi_netlink_fc.h>
#include "scsi_priv.h"
static int fc_queue_work(struct Scsi_Host *, struct work_struct *);
@@ -93,6 +96,29 @@
#define FC_PORTTYPE_MAX_NAMELEN 50
+/* Convert fc_host_event_code values to ascii string name */
+static const struct {
+ enum fc_host_event_code value;
+ char *name;
+} fc_host_event_code_names[] = {
+ { FCH_EVT_LIP, "lip" },
+ { FCH_EVT_LINKUP, "link_up" },
+ { FCH_EVT_LINKDOWN, "link_down" },
+ { FCH_EVT_LIPRESET, "lip_reset" },
+ { FCH_EVT_RSCN, "rscn" },
+ { FCH_EVT_ADAPTER_CHANGE, "adapter_chg" },
+ { FCH_EVT_PORT_UNKNOWN, "port_unknown" },
+ { FCH_EVT_PORT_ONLINE, "port_online" },
+ { FCH_EVT_PORT_OFFLINE, "port_offline" },
+ { FCH_EVT_PORT_FABRIC, "port_fabric" },
+ { FCH_EVT_LINK_UNKNOWN, "link_unknown" },
+ { FCH_EVT_VENDOR_UNIQUE, "vendor_unique" },
+};
+fc_enum_name_search(host_event_code, fc_host_event_code,
+ fc_host_event_code_names)
+#define FC_HOST_EVENT_CODE_MAX_NAMELEN 30
+
+
/* Convert fc_port_state values to ascii string name */
static struct {
enum fc_port_state value;
@@ -216,6 +242,7 @@
static void fc_timeout_deleted_rport(void *data);
+static void fc_timeout_fail_rport_io(void *data);
static void fc_scsi_scan_rport(void *data);
/*
@@ -223,7 +250,7 @@
* Increase these values if you add attributes
*/
#define FC_STARGET_NUM_ATTRS 3
-#define FC_RPORT_NUM_ATTRS 9
+#define FC_RPORT_NUM_ATTRS 10
#define FC_HOST_NUM_ATTRS 17
struct fc_internal {
@@ -301,8 +328,6 @@
fc_host->supported_classes = FC_COS_UNSPECIFIED;
memset(fc_host->supported_fc4s, 0,
sizeof(fc_host->supported_fc4s));
- memset(fc_host->symbolic_name, 0,
- sizeof(fc_host->symbolic_name));
fc_host->supported_speeds = FC_PORTSPEED_UNKNOWN;
fc_host->maxframe_size = -1;
memset(fc_host->serial_number, 0,
@@ -315,6 +340,8 @@
sizeof(fc_host->active_fc4s));
fc_host->speed = FC_PORTSPEED_UNKNOWN;
fc_host->fabric_name = -1;
+ memset(fc_host->symbolic_name, 0, sizeof(fc_host->symbolic_name));
+ memset(fc_host->system_hostname, 0, sizeof(fc_host->system_hostname));
fc_host->tgtid_bind_type = FC_TGTID_BIND_BY_WWPN;
@@ -377,10 +404,182 @@
" exceeded, the scsi target is removed. Value should be"
" between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT.");
+/**
+ * Netlink Infrastructure
+ **/
+
+static atomic_t fc_event_seq;
+
+/**
+ * fc_get_event_number - Obtain the next sequential FC event number
+ *
+ * Notes:
+ * We could have inline'd this, but it would have required fc_event_seq to
+ * be exposed. For now, live with the subroutine call.
+ * Atomic used to avoid lock/unlock...
+ **/
+u32
+fc_get_event_number(void)
+{
+ return atomic_add_return(1, &fc_event_seq);
+}
+EXPORT_SYMBOL(fc_get_event_number);
+
+
+/**
+ * fc_host_post_event - called to post an even on an fc_host.
+ *
+ * @shost: host the event occurred on
+ * @event_number: fc event number obtained from get_fc_event_number()
+ * @event_code: fc_host event being posted
+ * @event_data: 32bits of data for the event being posted
+ *
+ * Notes:
+ * This routine assumes no locks are held on entry.
+ **/
+void
+fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+ enum fc_host_event_code event_code, u32 event_data)
+{
+ struct sk_buff *skb;
+ struct nlmsghdr *nlh;
+ struct fc_nl_event *event;
+ const char *name;
+ u32 len, skblen;
+ int err;
+
+ if (!scsi_nl_sock) {
+ err = -ENOENT;
+ goto send_fail;
+ }
+
+ len = FC_NL_MSGALIGN(sizeof(*event));
+ skblen = NLMSG_SPACE(len);
+
+ skb = alloc_skb(skblen, GFP_KERNEL);
+ if (!skb) {
+ err = -ENOBUFS;
+ goto send_fail;
+ }
+
+ nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG,
+ skblen - sizeof(*nlh), 0);
+ if (!nlh) {
+ err = -ENOBUFS;
+ goto send_fail_skb;
+ }
+ event = NLMSG_DATA(nlh);
+
+ INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC,
+ FC_NL_ASYNC_EVENT, len);
+ event->seconds = get_seconds();
+ event->vendor_id = 0;
+ event->host_no = shost->host_no;
+ event->event_datalen = sizeof(u32); /* bytes */
+ event->event_num = event_number;
+ event->event_code = event_code;
+ event->event_data = event_data;
+
+ err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS);
+ if (err && (err != -ESRCH)) /* filter no recipient errors */
+ /* nlmsg_multicast already kfree_skb'd */
+ goto send_fail;
+
+ return;
+
+send_fail_skb:
+ kfree_skb(skb);
+send_fail:
+ name = get_fc_host_event_code_name(event_code);
+ printk(KERN_WARNING
+ "%s: Dropped Event : host %d %s data 0x%08x - err %d\n",
+ __FUNCTION__, shost->host_no,
+ (name) ? name : "<unknown>", event_data, err);
+ return;
+}
+EXPORT_SYMBOL(fc_host_post_event);
+
+
+/**
+ * fc_host_post_vendor_event - called to post a vendor unique event on
+ * a fc_host
+ *
+ * @shost: host the event occurred on
+ * @event_number: fc event number obtained from get_fc_event_number()
+ * @data_len: amount, in bytes, of vendor unique data
+ * @data_buf: pointer to vendor unique data
+ *
+ * Notes:
+ * This routine assumes no locks are held on entry.
+ **/
+void
+fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+ u32 data_len, char * data_buf, u64 vendor_id)
+{
+ struct sk_buff *skb;
+ struct nlmsghdr *nlh;
+ struct fc_nl_event *event;
+ u32 len, skblen;
+ int err;
+
+ if (!scsi_nl_sock) {
+ err = -ENOENT;
+ goto send_vendor_fail;
+ }
+
+ len = FC_NL_MSGALIGN(sizeof(*event) + data_len);
+ skblen = NLMSG_SPACE(len);
+
+ skb = alloc_skb(skblen, GFP_KERNEL);
+ if (!skb) {
+ err = -ENOBUFS;
+ goto send_vendor_fail;
+ }
+
+ nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG,
+ skblen - sizeof(*nlh), 0);
+ if (!nlh) {
+ err = -ENOBUFS;
+ goto send_vendor_fail_skb;
+ }
+ event = NLMSG_DATA(nlh);
+
+ INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC,
+ FC_NL_ASYNC_EVENT, len);
+ event->seconds = get_seconds();
+ event->vendor_id = vendor_id;
+ event->host_no = shost->host_no;
+ event->event_datalen = data_len; /* bytes */
+ event->event_num = event_number;
+ event->event_code = FCH_EVT_VENDOR_UNIQUE;
+ memcpy(&event->event_data, data_buf, data_len);
+
+ err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS);
+ if (err && (err != -ESRCH)) /* filter no recipient errors */
+ /* nlmsg_multicast already kfree_skb'd */
+ goto send_vendor_fail;
+
+ return;
+
+send_vendor_fail_skb:
+ kfree_skb(skb);
+send_vendor_fail:
+ printk(KERN_WARNING
+ "%s: Dropped Event : host %d vendor_unique - err %d\n",
+ __FUNCTION__, shost->host_no, err);
+ return;
+}
+EXPORT_SYMBOL(fc_host_post_vendor_event);
+
+
static __init int fc_transport_init(void)
{
- int error = transport_class_register(&fc_host_class);
+ int error;
+
+ atomic_set(&fc_event_seq, 0);
+
+ error = transport_class_register(&fc_host_class);
if (error)
return error;
error = transport_class_register(&fc_rport_class);
@@ -424,11 +623,14 @@
struct fc_rport *rport = transport_class_to_rport(cdev); \
struct Scsi_Host *shost = rport_to_shost(rport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
+ char *cp; \
if ((rport->port_state == FC_PORTSTATE_BLOCKED) || \
(rport->port_state == FC_PORTSTATE_DELETED) || \
(rport->port_state == FC_PORTSTATE_NOTPRESENT)) \
return -EBUSY; \
- val = simple_strtoul(buf, NULL, 0); \
+ val = simple_strtoul(buf, &cp, 0); \
+ if (*cp && (*cp != '\n')) \
+ return -EINVAL; \
i->f->set_rport_##field(rport, val); \
return count; \
}
@@ -510,6 +712,13 @@
if (i->f->show_rport_##field) \
count++
+#define SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(field) \
+{ \
+ i->private_rport_attrs[count] = class_device_attr_rport_##field; \
+ i->rport_attrs[count] = &i->private_rport_attrs[count]; \
+ count++; \
+}
+
/* The FC Transport Remote Port Attributes: */
@@ -542,12 +751,14 @@
struct fc_rport *rport = transport_class_to_rport(cdev);
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
+ char *cp;
if ((rport->port_state == FC_PORTSTATE_BLOCKED) ||
(rport->port_state == FC_PORTSTATE_DELETED) ||
(rport->port_state == FC_PORTSTATE_NOTPRESENT))
return -EBUSY;
- val = simple_strtoul(buf, NULL, 0);
- if ((val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT))
+ val = simple_strtoul(buf, &cp, 0);
+ if ((*cp && (*cp != '\n')) ||
+ (val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT))
return -EINVAL;
i->f->set_rport_dev_loss_tmo(rport, val);
return count;
@@ -597,6 +808,44 @@
fc_private_rport_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN);
fc_private_rport_rd_attr(scsi_target_id, "%d\n", 20);
+/*
+ * fast_io_fail_tmo attribute
+ */
+static ssize_t
+show_fc_rport_fast_io_fail_tmo (struct class_device *cdev, char *buf)
+{
+ struct fc_rport *rport = transport_class_to_rport(cdev);
+
+ if (rport->fast_io_fail_tmo == -1)
+ return snprintf(buf, 5, "off\n");
+ return snprintf(buf, 20, "%d\n", rport->fast_io_fail_tmo);
+}
+
+static ssize_t
+store_fc_rport_fast_io_fail_tmo(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ int val;
+ char *cp;
+ struct fc_rport *rport = transport_class_to_rport(cdev);
+
+ if ((rport->port_state == FC_PORTSTATE_BLOCKED) ||
+ (rport->port_state == FC_PORTSTATE_DELETED) ||
+ (rport->port_state == FC_PORTSTATE_NOTPRESENT))
+ return -EBUSY;
+ if (strncmp(buf, "off", 3) == 0)
+ rport->fast_io_fail_tmo = -1;
+ else {
+ val = simple_strtoul(buf, &cp, 0);
+ if ((*cp && (*cp != '\n')) ||
+ (val < 0) || (val >= rport->dev_loss_tmo))
+ return -EINVAL;
+ rport->fast_io_fail_tmo = val;
+ }
+ return count;
+}
+static FC_CLASS_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
+ show_fc_rport_fast_io_fail_tmo, store_fc_rport_fast_io_fail_tmo);
/*
@@ -682,12 +931,34 @@
int val; \
struct Scsi_Host *shost = transport_class_to_shost(cdev); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
+ char *cp; \
\
- val = simple_strtoul(buf, NULL, 0); \
+ val = simple_strtoul(buf, &cp, 0); \
+ if (*cp && (*cp != '\n')) \
+ return -EINVAL; \
i->f->set_host_##field(shost, val); \
return count; \
}
+#define fc_host_store_str_function(field, slen) \
+static ssize_t \
+store_fc_host_##field(struct class_device *cdev, const char *buf, \
+ size_t count) \
+{ \
+ struct Scsi_Host *shost = transport_class_to_shost(cdev); \
+ struct fc_internal *i = to_fc_internal(shost->transportt); \
+ unsigned int cnt=count; \
+ \
+ /* count may include a LF at end of string */ \
+ if (buf[cnt-1] == '\n') \
+ cnt--; \
+ if (cnt > ((slen) - 1)) \
+ return -EINVAL; \
+ memcpy(fc_host_##field(shost), buf, cnt); \
+ i->f->set_host_##field(shost); \
+ return count; \
+}
+
#define fc_host_rd_attr(field, format_string, sz) \
fc_host_show_function(field, format_string, sz, ) \
static FC_CLASS_DEVICE_ATTR(host, field, S_IRUGO, \
@@ -815,7 +1086,6 @@
fc_private_host_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long);
fc_private_host_rd_attr_cast(permanent_port_name, "0x%llx\n", 20,
unsigned long long);
-fc_private_host_rd_attr(symbolic_name, "%s\n", (FC_SYMBOLIC_NAME_SIZE +1));
fc_private_host_rd_attr(maxframe_size, "%u bytes\n", 20);
fc_private_host_rd_attr(serial_number, "%s\n", (FC_SERIAL_NUMBER_SIZE +1));
@@ -858,6 +1128,13 @@
fc_host_rd_enum_attr(port_type, FC_PORTTYPE_MAX_NAMELEN);
fc_host_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN);
fc_host_rd_attr_cast(fabric_name, "0x%llx\n", 20, unsigned long long);
+fc_host_rd_attr(symbolic_name, "%s\n", FC_SYMBOLIC_NAME_SIZE + 1);
+
+fc_private_host_show_function(system_hostname, "%s\n",
+ FC_SYMBOLIC_NAME_SIZE + 1, )
+fc_host_store_str_function(system_hostname, FC_SYMBOLIC_NAME_SIZE)
+static FC_CLASS_DEVICE_ATTR(host, system_hostname, S_IRUGO | S_IWUSR,
+ show_fc_host_system_hostname, store_fc_host_system_hostname);
/* Private Host Attributes */
@@ -1223,7 +1500,6 @@
SETUP_HOST_ATTRIBUTE_RD(permanent_port_name);
SETUP_HOST_ATTRIBUTE_RD(supported_classes);
SETUP_HOST_ATTRIBUTE_RD(supported_fc4s);
- SETUP_HOST_ATTRIBUTE_RD(symbolic_name);
SETUP_HOST_ATTRIBUTE_RD(supported_speeds);
SETUP_HOST_ATTRIBUTE_RD(maxframe_size);
SETUP_HOST_ATTRIBUTE_RD(serial_number);
@@ -1234,6 +1510,8 @@
SETUP_HOST_ATTRIBUTE_RD(active_fc4s);
SETUP_HOST_ATTRIBUTE_RD(speed);
SETUP_HOST_ATTRIBUTE_RD(fabric_name);
+ SETUP_HOST_ATTRIBUTE_RD(symbolic_name);
+ SETUP_HOST_ATTRIBUTE_RW(system_hostname);
/* Transport-managed attributes */
SETUP_PRIVATE_HOST_ATTRIBUTE_RW(tgtid_bind_type);
@@ -1257,6 +1535,8 @@
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id);
+ if (ft->terminate_rport_io)
+ SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo);
BUG_ON(count > FC_RPORT_NUM_ATTRS);
@@ -1328,7 +1608,7 @@
* @delay: jiffies to delay the work queuing
*
* Return value:
- * 0 on success / != 0 for error
+ * 1 on success / 0 already queued / < 0 for error
**/
static int
fc_queue_devloss_work(struct Scsi_Host *shost, struct work_struct *work,
@@ -1343,6 +1623,9 @@
return -EINVAL;
}
+ if (delay == 0)
+ return queue_work(fc_host_devloss_work_q(shost), work);
+
return queue_delayed_work(fc_host_devloss_work_q(shost), work, delay);
}
@@ -1435,10 +1718,23 @@
struct fc_rport *rport = (struct fc_rport *)data;
struct Scsi_Host *shost = rport_to_shost(rport);
unsigned long flags;
+ struct fc_internal *i = to_fc_internal(shost->transportt);
+
+ /*
+ * Involve the LLDD if possible. All io on the rport is to
+ * be terminated, either as part of the dev_loss_tmo callback
+ * processing, or via the terminate_rport_io function.
+ */
+ if (i->f->dev_loss_tmo_callbk)
+ i->f->dev_loss_tmo_callbk(rport);
+ else if (i->f->terminate_rport_io)
+ i->f->terminate_rport_io(rport);
spin_lock_irqsave(shost->host_lock, flags);
if (rport->flags & FC_RPORT_DEVLOSS_PENDING) {
spin_unlock_irqrestore(shost->host_lock, flags);
+ if (!cancel_delayed_work(&rport->fail_io_work))
+ fc_flush_devloss(shost);
if (!cancel_delayed_work(&rport->dev_loss_work))
fc_flush_devloss(shost);
spin_lock_irqsave(shost->host_lock, flags);
@@ -1461,10 +1757,7 @@
struct fc_rport *rport = (struct fc_rport *)data;
struct device *dev = &rport->dev;
struct Scsi_Host *shost = rport_to_shost(rport);
-
- /* Delete SCSI target and sdevs */
- if (rport->scsi_target_id != -1)
- fc_starget_delete(data);
+ struct fc_internal *i = to_fc_internal(shost->transportt);
/*
* if a scan is pending, flush the SCSI Host work_q so that
@@ -1473,6 +1766,14 @@
if (rport->flags & FC_RPORT_SCAN_PENDING)
scsi_flush_work(shost);
+ /* Delete SCSI target and sdevs */
+ if (rport->scsi_target_id != -1)
+ fc_starget_delete(data);
+ else if (i->f->dev_loss_tmo_callbk)
+ i->f->dev_loss_tmo_callbk(rport);
+ else if (i->f->terminate_rport_io)
+ i->f->terminate_rport_io(rport);
+
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
@@ -1524,8 +1825,10 @@
if (fci->f->dd_fcrport_size)
rport->dd_data = &rport[1];
rport->channel = channel;
+ rport->fast_io_fail_tmo = -1;
INIT_WORK(&rport->dev_loss_work, fc_timeout_deleted_rport, rport);
+ INIT_WORK(&rport->fail_io_work, fc_timeout_fail_rport_io, rport);
INIT_WORK(&rport->scan_work, fc_scsi_scan_rport, rport);
INIT_WORK(&rport->stgt_delete_work, fc_starget_delete, rport);
INIT_WORK(&rport->rport_delete_work, fc_rport_final_delete, rport);
@@ -1689,11 +1992,13 @@
/* restart the target */
/*
- * Stop the target timer first. Take no action
+ * Stop the target timers first. Take no action
* on the del_timer failure as the state
* machine state change will validate the
* transaction.
*/
+ if (!cancel_delayed_work(&rport->fail_io_work))
+ fc_flush_devloss(shost);
if (!cancel_delayed_work(work))
fc_flush_devloss(shost);
@@ -1837,6 +2142,7 @@
fc_remote_port_delete(struct fc_rport *rport)
{
struct Scsi_Host *shost = rport_to_shost(rport);
+ struct fc_internal *i = to_fc_internal(shost->transportt);
int timeout = rport->dev_loss_tmo;
unsigned long flags;
@@ -1867,6 +2173,12 @@
scsi_target_block(&rport->dev);
+ /* see if we need to kill io faster than waiting for device loss */
+ if ((rport->fast_io_fail_tmo != -1) &&
+ (rport->fast_io_fail_tmo < timeout) && (i->f->terminate_rport_io))
+ fc_queue_devloss_work(shost, &rport->fail_io_work,
+ rport->fast_io_fail_tmo * HZ);
+
/* cap the length the devices can be blocked until they are deleted */
fc_queue_devloss_work(shost, &rport->dev_loss_work, timeout * HZ);
}
@@ -1926,6 +2238,8 @@
* machine state change will validate the
* transaction.
*/
+ if (!cancel_delayed_work(&rport->fail_io_work))
+ fc_flush_devloss(shost);
if (!cancel_delayed_work(&rport->dev_loss_work))
fc_flush_devloss(shost);
@@ -2047,6 +2361,28 @@
}
/**
+ * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a
+ * disconnected SCSI target.
+ *
+ * @data: rport to terminate io on.
+ *
+ * Notes: Only requests the failure of the io, not that all are flushed
+ * prior to returning.
+ **/
+static void
+fc_timeout_fail_rport_io(void *data)
+{
+ struct fc_rport *rport = (struct fc_rport *)data;
+ struct Scsi_Host *shost = rport_to_shost(rport);
+ struct fc_internal *i = to_fc_internal(shost->transportt);
+
+ if (rport->port_state != FC_PORTSTATE_BLOCKED)
+ return;
+
+ i->f->terminate_rport_io(rport);
+}
+
+/**
* fc_scsi_scan_rport - called to perform a scsi scan on a remote port.
*
* @data: remote port to be scanned.
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 2ecd141..7b0019c 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -34,7 +34,7 @@
#define ISCSI_SESSION_ATTRS 11
#define ISCSI_CONN_ATTRS 11
#define ISCSI_HOST_ATTRS 0
-#define ISCSI_TRANSPORT_VERSION "1.1-646"
+#define ISCSI_TRANSPORT_VERSION "2.0-685"
struct iscsi_internal {
int daemon_pid;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 5a625c3..b5b0c2c 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -77,6 +77,24 @@
return len; \
}
+#define sas_bitfield_name_set(title, table) \
+static ssize_t \
+set_sas_##title##_names(u32 *table_key, const char *buf) \
+{ \
+ ssize_t len = 0; \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(table); i++) { \
+ len = strlen(table[i].name); \
+ if (strncmp(buf, table[i].name, len) == 0 && \
+ (buf[len] == '\n' || buf[len] == '\0')) { \
+ *table_key = table[i].value; \
+ return 0; \
+ } \
+ } \
+ return -EINVAL; \
+}
+
#define sas_bitfield_name_search(title, table) \
static ssize_t \
get_sas_##title##_names(u32 table_key, char *buf) \
@@ -131,7 +149,7 @@
{ SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" },
};
sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
-
+sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
/*
* SAS host attributes
@@ -253,10 +271,39 @@
return get_sas_linkspeed_names(phy->field, buf); \
}
+/* Fudge to tell if we're minimum or maximum */
+#define sas_phy_store_linkspeed(field) \
+static ssize_t \
+store_sas_phy_##field(struct class_device *cdev, const char *buf, \
+ size_t count) \
+{ \
+ struct sas_phy *phy = transport_class_to_phy(cdev); \
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \
+ struct sas_internal *i = to_sas_internal(shost->transportt); \
+ u32 value; \
+ struct sas_phy_linkrates rates = {0}; \
+ int error; \
+ \
+ error = set_sas_linkspeed_names(&value, buf); \
+ if (error) \
+ return error; \
+ rates.field = value; \
+ error = i->f->set_phy_speed(phy, &rates); \
+ \
+ return error ? error : count; \
+}
+
+#define sas_phy_linkspeed_rw_attr(field) \
+ sas_phy_show_linkspeed(field) \
+ sas_phy_store_linkspeed(field) \
+static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, \
+ store_sas_phy_##field)
+
#define sas_phy_linkspeed_attr(field) \
sas_phy_show_linkspeed(field) \
static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
+
#define sas_phy_show_linkerror(field) \
static ssize_t \
show_sas_phy_##field(struct class_device *cdev, char *buf) \
@@ -266,9 +313,6 @@
struct sas_internal *i = to_sas_internal(shost->transportt); \
int error; \
\
- if (!phy->local_attached) \
- return -EINVAL; \
- \
error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0; \
if (error) \
return error; \
@@ -299,9 +343,6 @@
struct sas_internal *i = to_sas_internal(shost->transportt);
int error;
- if (!phy->local_attached)
- return -EINVAL;
-
error = i->f->phy_reset(phy, hard_reset);
if (error)
return error;
@@ -332,9 +373,9 @@
//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int);
sas_phy_linkspeed_attr(negotiated_linkrate);
sas_phy_linkspeed_attr(minimum_linkrate_hw);
-sas_phy_linkspeed_attr(minimum_linkrate);
+sas_phy_linkspeed_rw_attr(minimum_linkrate);
sas_phy_linkspeed_attr(maximum_linkrate_hw);
-sas_phy_linkspeed_attr(maximum_linkrate);
+sas_phy_linkspeed_rw_attr(maximum_linkrate);
sas_phy_linkerror_attr(invalid_dword_count);
sas_phy_linkerror_attr(running_disparity_error_count);
sas_phy_linkerror_attr(loss_of_dword_sync_count);
@@ -849,7 +890,7 @@
* Only devices behind an expander are supported, because the
* enclosure identifier is a SMP feature.
*/
- if (phy->local_attached)
+ if (scsi_is_sas_phy_local(phy))
return -EINVAL;
error = i->f->get_enclosure_identifier(rphy, &identifier);
@@ -870,7 +911,7 @@
struct sas_internal *i = to_sas_internal(shost->transportt);
int val;
- if (phy->local_attached)
+ if (scsi_is_sas_phy_local(phy))
return -EINVAL;
val = i->f->get_bay_identifier(rphy);
@@ -1316,13 +1357,23 @@
* Setup / Teardown code
*/
-#define SETUP_TEMPLATE(attrb, field, perm, test) \
+#define SETUP_TEMPLATE(attrb, field, perm, test) \
i->private_##attrb[count] = class_device_attr_##field; \
i->private_##attrb[count].attr.mode = perm; \
i->attrb[count] = &i->private_##attrb[count]; \
if (test) \
count++
+#define SETUP_TEMPLATE_RW(attrb, field, perm, test, ro_test, ro_perm) \
+ i->private_##attrb[count] = class_device_attr_##field; \
+ i->private_##attrb[count].attr.mode = perm; \
+ if (ro_test) { \
+ i->private_##attrb[count].attr.mode = ro_perm; \
+ i->private_##attrb[count].store = NULL; \
+ } \
+ i->attrb[count] = &i->private_##attrb[count]; \
+ if (test) \
+ count++
#define SETUP_RPORT_ATTRIBUTE(field) \
SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1)
@@ -1333,6 +1384,10 @@
#define SETUP_PHY_ATTRIBUTE(field) \
SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1)
+#define SETUP_PHY_ATTRIBUTE_RW(field) \
+ SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
+ !i->f->set_phy_speed, S_IRUGO)
+
#define SETUP_PORT_ATTRIBUTE(field) \
SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1)
@@ -1413,9 +1468,9 @@
//SETUP_PHY_ATTRIBUTE(port_identifier);
SETUP_PHY_ATTRIBUTE(negotiated_linkrate);
SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw);
- SETUP_PHY_ATTRIBUTE(minimum_linkrate);
+ SETUP_PHY_ATTRIBUTE_RW(minimum_linkrate);
SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw);
- SETUP_PHY_ATTRIBUTE(maximum_linkrate);
+ SETUP_PHY_ATTRIBUTE_RW(maximum_linkrate);
SETUP_PHY_ATTRIBUTE(invalid_dword_count);
SETUP_PHY_ATTRIBUTE(running_disparity_error_count);
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 29a9a53..9f070f0 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -47,6 +47,7 @@
/* Private data accessors (keep these out of the header file) */
#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
+#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
struct spi_internal {
@@ -240,6 +241,7 @@
spi_pcomp_en(starget) = 0;
spi_hold_mcs(starget) = 0;
spi_dv_pending(starget) = 0;
+ spi_dv_in_progress(starget) = 0;
spi_initial_dv(starget) = 0;
mutex_init(&spi_dv_mutex(starget));
@@ -830,28 +832,37 @@
DV_SET(period, spi_min_period(starget));
/* try QAS requests; this should be harmless to set if the
* target supports it */
- if (scsi_device_qas(sdev))
+ if (scsi_device_qas(sdev)) {
DV_SET(qas, 1);
- /* Also try IU transfers */
- if (scsi_device_ius(sdev))
+ } else {
+ DV_SET(qas, 0);
+ }
+
+ if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
+ /* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
- if (spi_min_period(starget) < 9) {
- /* This u320 (or u640). Ignore the coupled parameters
- * like DT and IU, but set the optional ones */
+ /* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
if (spi_min_period(starget) == 8)
DV_SET(pcomp_en, 1);
+ } else {
+ DV_SET(iu, 0);
}
+
/* now that we've done all this, actually check the bus
* signal type (if known). Some devices are stupid on
* a SE bus and still claim they can try LVD only settings */
if (i->f->get_signalling)
i->f->get_signalling(shost);
if (spi_signalling(shost) == SPI_SIGNAL_SE ||
- spi_signalling(shost) == SPI_SIGNAL_HVD)
+ spi_signalling(shost) == SPI_SIGNAL_HVD ||
+ !scsi_device_dt(sdev)) {
DV_SET(dt, 0);
+ } else {
+ DV_SET(dt, 1);
+ }
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
@@ -907,6 +918,10 @@
if (unlikely(scsi_device_get(sdev)))
return;
+ if (unlikely(spi_dv_in_progress(starget)))
+ return;
+ spi_dv_in_progress(starget) = 1;
+
buffer = kzalloc(len, GFP_KERNEL);
if (unlikely(!buffer))
@@ -938,6 +953,7 @@
out_free:
kfree(buffer);
out_put:
+ spi_dv_in_progress(starget) = 0;
scsi_device_put(sdev);
}
EXPORT_SYMBOL(spi_dv_device);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 98bd3aa..638cff4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1215,7 +1215,7 @@
/* Either no media are present but the drive didn't tell us,
or they are present but the read capacity command fails */
/* sdkp->media_present = 0; -- not always correct */
- sdkp->capacity = 0x200000; /* 1 GB - random */
+ sdkp->capacity = 0; /* unknown mapped to zero - as usual */
return;
} else if (the_result && longrc) {
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 7cd366f..4f1db6f 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -97,7 +97,7 @@
}
static inline
-void fill_hpc_entries(struct hpc_chunk *hcp, Scsi_Cmnd *cmd, int datainp)
+void fill_hpc_entries(struct hpc_chunk *hcp, struct scsi_cmnd *cmd, int datainp)
{
unsigned long len = cmd->SCp.this_residual;
void *addr = cmd->SCp.ptr;
@@ -129,7 +129,7 @@
hcp->desc.cntinfo = HPCDMA_EOX;
}
-static int dma_setup(Scsi_Cmnd *cmd, int datainp)
+static int dma_setup(struct scsi_cmnd *cmd, int datainp)
{
struct ip22_hostdata *hdata = HDATA(cmd->device->host);
struct hpc3_scsiregs *hregs =
@@ -163,7 +163,7 @@
return 0;
}
-static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
struct ip22_hostdata *hdata = HDATA(instance);
@@ -305,7 +305,7 @@
return 1;
}
-static int sgiwd93_bus_reset(Scsi_Cmnd *cmd)
+static int sgiwd93_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
new file mode 100644
index 0000000..3cf3106
--- /dev/null
+++ b/drivers/scsi/stex.c
@@ -0,0 +1,1252 @@
+/*
+ * SuperTrak EX Series Storage Controller driver for Linux
+ *
+ * Copyright (C) 2005, 2006 Promise Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Written By:
+ * Ed Lin <promise_linux@promise.com>
+ *
+ * Version: 2.9.0.13
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+#define DRV_NAME "stex"
+#define ST_DRIVER_VERSION "2.9.0.13"
+#define ST_VER_MAJOR 2
+#define ST_VER_MINOR 9
+#define ST_OEM 0
+#define ST_BUILD_VER 13
+
+enum {
+ /* MU register offset */
+ IMR0 = 0x10, /* MU_INBOUND_MESSAGE_REG0 */
+ IMR1 = 0x14, /* MU_INBOUND_MESSAGE_REG1 */
+ OMR0 = 0x18, /* MU_OUTBOUND_MESSAGE_REG0 */
+ OMR1 = 0x1c, /* MU_OUTBOUND_MESSAGE_REG1 */
+ IDBL = 0x20, /* MU_INBOUND_DOORBELL */
+ IIS = 0x24, /* MU_INBOUND_INTERRUPT_STATUS */
+ IIM = 0x28, /* MU_INBOUND_INTERRUPT_MASK */
+ ODBL = 0x2c, /* MU_OUTBOUND_DOORBELL */
+ OIS = 0x30, /* MU_OUTBOUND_INTERRUPT_STATUS */
+ OIM = 0x3c, /* MU_OUTBOUND_INTERRUPT_MASK */
+
+ /* MU register value */
+ MU_INBOUND_DOORBELL_HANDSHAKE = 1,
+ MU_INBOUND_DOORBELL_REQHEADCHANGED = 2,
+ MU_INBOUND_DOORBELL_STATUSTAILCHANGED = 4,
+ MU_INBOUND_DOORBELL_HMUSTOPPED = 8,
+ MU_INBOUND_DOORBELL_RESET = 16,
+
+ MU_OUTBOUND_DOORBELL_HANDSHAKE = 1,
+ MU_OUTBOUND_DOORBELL_REQUESTTAILCHANGED = 2,
+ MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED = 4,
+ MU_OUTBOUND_DOORBELL_BUSCHANGE = 8,
+ MU_OUTBOUND_DOORBELL_HASEVENT = 16,
+
+ /* MU status code */
+ MU_STATE_STARTING = 1,
+ MU_STATE_FMU_READY_FOR_HANDSHAKE = 2,
+ MU_STATE_SEND_HANDSHAKE_FRAME = 3,
+ MU_STATE_STARTED = 4,
+ MU_STATE_RESETTING = 5,
+
+ MU_MAX_DELAY_TIME = 240000,
+ MU_HANDSHAKE_SIGNATURE = 0x55aaaa55,
+ HMU_PARTNER_TYPE = 2,
+
+ /* firmware returned values */
+ SRB_STATUS_SUCCESS = 0x01,
+ SRB_STATUS_ERROR = 0x04,
+ SRB_STATUS_BUSY = 0x05,
+ SRB_STATUS_INVALID_REQUEST = 0x06,
+ SRB_STATUS_SELECTION_TIMEOUT = 0x0A,
+ SRB_SEE_SENSE = 0x80,
+
+ /* task attribute */
+ TASK_ATTRIBUTE_SIMPLE = 0x0,
+ TASK_ATTRIBUTE_HEADOFQUEUE = 0x1,
+ TASK_ATTRIBUTE_ORDERED = 0x2,
+ TASK_ATTRIBUTE_ACA = 0x4,
+
+ /* request count, etc. */
+ MU_MAX_REQUEST = 32,
+
+ /* one message wasted, use MU_MAX_REQUEST+1
+ to handle MU_MAX_REQUEST messages */
+ MU_REQ_COUNT = (MU_MAX_REQUEST + 1),
+ MU_STATUS_COUNT = (MU_MAX_REQUEST + 1),
+
+ STEX_CDB_LENGTH = MAX_COMMAND_SIZE,
+ REQ_VARIABLE_LEN = 1024,
+ STATUS_VAR_LEN = 128,
+ ST_CAN_QUEUE = MU_MAX_REQUEST,
+ ST_CMD_PER_LUN = MU_MAX_REQUEST,
+ ST_MAX_SG = 32,
+
+ /* sg flags */
+ SG_CF_EOT = 0x80, /* end of table */
+ SG_CF_64B = 0x40, /* 64 bit item */
+ SG_CF_HOST = 0x20, /* sg in host memory */
+
+ ST_MAX_ARRAY_SUPPORTED = 16,
+ ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1),
+ ST_MAX_LUN_PER_TARGET = 16,
+
+ st_shasta = 0,
+ st_vsc = 1,
+
+ PASSTHRU_REQ_TYPE = 0x00000001,
+ PASSTHRU_REQ_NO_WAKEUP = 0x00000100,
+ ST_INTERNAL_TIMEOUT = 30,
+
+ /* vendor specific commands of Promise */
+ ARRAY_CMD = 0xe0,
+ CONTROLLER_CMD = 0xe1,
+ DEBUGGING_CMD = 0xe2,
+ PASSTHRU_CMD = 0xe3,
+
+ PASSTHRU_GET_ADAPTER = 0x05,
+ PASSTHRU_GET_DRVVER = 0x10,
+ CTLR_POWER_STATE_CHANGE = 0x0e,
+ CTLR_POWER_SAVING = 0x01,
+
+ PASSTHRU_SIGNATURE = 0x4e415041,
+
+ INQUIRY_EVPD = 0x01,
+};
+
+struct st_sgitem {
+ u8 ctrl; /* SG_CF_xxx */
+ u8 reserved[3];
+ __le32 count;
+ __le32 addr;
+ __le32 addr_hi;
+};
+
+struct st_sgtable {
+ __le16 sg_count;
+ __le16 max_sg_count;
+ __le32 sz_in_byte;
+ struct st_sgitem table[ST_MAX_SG];
+};
+
+struct handshake_frame {
+ __le32 rb_phy; /* request payload queue physical address */
+ __le32 rb_phy_hi;
+ __le16 req_sz; /* size of each request payload */
+ __le16 req_cnt; /* count of reqs the buffer can hold */
+ __le16 status_sz; /* size of each status payload */
+ __le16 status_cnt; /* count of status the buffer can hold */
+ __le32 hosttime; /* seconds from Jan 1, 1970 (GMT) */
+ __le32 hosttime_hi;
+ u8 partner_type; /* who sends this frame */
+ u8 reserved0[7];
+ __le32 partner_ver_major;
+ __le32 partner_ver_minor;
+ __le32 partner_ver_oem;
+ __le32 partner_ver_build;
+ u32 reserved1[4];
+};
+
+struct req_msg {
+ __le16 tag;
+ u8 lun;
+ u8 target;
+ u8 task_attr;
+ u8 task_manage;
+ u8 prd_entry;
+ u8 payload_sz; /* payload size in 4-byte */
+ u8 cdb[STEX_CDB_LENGTH];
+ u8 variable[REQ_VARIABLE_LEN];
+};
+
+struct status_msg {
+ __le16 tag;
+ u8 lun;
+ u8 target;
+ u8 srb_status;
+ u8 scsi_status;
+ u8 reserved;
+ u8 payload_sz; /* payload size in 4-byte */
+ u8 variable[STATUS_VAR_LEN];
+};
+
+struct ver_info {
+ u32 major;
+ u32 minor;
+ u32 oem;
+ u32 build;
+ u32 reserved[2];
+};
+
+struct st_frame {
+ u32 base[6];
+ u32 rom_addr;
+
+ struct ver_info drv_ver;
+ struct ver_info bios_ver;
+
+ u32 bus;
+ u32 slot;
+ u32 irq_level;
+ u32 irq_vec;
+ u32 id;
+ u32 subid;
+
+ u32 dimm_size;
+ u8 dimm_type;
+ u8 reserved[3];
+
+ u32 channel;
+ u32 reserved1;
+};
+
+struct st_drvver {
+ u32 major;
+ u32 minor;
+ u32 oem;
+ u32 build;
+ u32 signature[2];
+ u8 console_id;
+ u8 host_no;
+ u8 reserved0[2];
+ u32 reserved[3];
+};
+
+#define MU_REQ_BUFFER_SIZE (MU_REQ_COUNT * sizeof(struct req_msg))
+#define MU_STATUS_BUFFER_SIZE (MU_STATUS_COUNT * sizeof(struct status_msg))
+#define MU_BUFFER_SIZE (MU_REQ_BUFFER_SIZE + MU_STATUS_BUFFER_SIZE)
+#define STEX_BUFFER_SIZE (MU_BUFFER_SIZE + sizeof(struct st_frame))
+
+struct st_ccb {
+ struct req_msg *req;
+ struct scsi_cmnd *cmd;
+
+ void *sense_buffer;
+ unsigned int sense_bufflen;
+ int sg_count;
+
+ u32 req_type;
+ u8 srb_status;
+ u8 scsi_status;
+};
+
+struct st_hba {
+ void __iomem *mmio_base; /* iomapped PCI memory space */
+ void *dma_mem;
+ dma_addr_t dma_handle;
+
+ struct Scsi_Host *host;
+ struct pci_dev *pdev;
+
+ u32 req_head;
+ u32 req_tail;
+ u32 status_head;
+ u32 status_tail;
+
+ struct status_msg *status_buffer;
+ void *copy_buffer; /* temp buffer for driver-handled commands */
+ struct st_ccb ccb[MU_MAX_REQUEST];
+ struct st_ccb *wait_ccb;
+ wait_queue_head_t waitq;
+
+ unsigned int mu_status;
+ int out_req_cnt;
+
+ unsigned int cardtype;
+};
+
+static const char console_inq_page[] =
+{
+ 0x03,0x00,0x03,0x03,0xFA,0x00,0x00,0x30,
+ 0x50,0x72,0x6F,0x6D,0x69,0x73,0x65,0x20, /* "Promise " */
+ 0x52,0x41,0x49,0x44,0x20,0x43,0x6F,0x6E, /* "RAID Con" */
+ 0x73,0x6F,0x6C,0x65,0x20,0x20,0x20,0x20, /* "sole " */
+ 0x31,0x2E,0x30,0x30,0x20,0x20,0x20,0x20, /* "1.00 " */
+ 0x53,0x58,0x2F,0x52,0x53,0x41,0x46,0x2D, /* "SX/RSAF-" */
+ 0x54,0x45,0x31,0x2E,0x30,0x30,0x20,0x20, /* "TE1.00 " */
+ 0x0C,0x20,0x20,0x20,0x20,0x20,0x20,0x20
+};
+
+MODULE_AUTHOR("Ed Lin");
+MODULE_DESCRIPTION("Promise Technology SuperTrak EX Controllers");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ST_DRIVER_VERSION);
+
+static void stex_gettime(__le32 *time)
+{
+ struct timeval tv;
+ do_gettimeofday(&tv);
+
+ *time = cpu_to_le32(tv.tv_sec & 0xffffffff);
+ *(time + 1) = cpu_to_le32((tv.tv_sec >> 16) >> 16);
+}
+
+static struct status_msg *stex_get_status(struct st_hba *hba)
+{
+ struct status_msg *status =
+ hba->status_buffer + hba->status_tail;
+
+ ++hba->status_tail;
+ hba->status_tail %= MU_STATUS_COUNT;
+
+ return status;
+}
+
+static void stex_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ cmd->sense_buffer[0] = 0x70; /* fixed format, current */
+ cmd->sense_buffer[2] = sk;
+ cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
+ cmd->sense_buffer[12] = asc;
+ cmd->sense_buffer[13] = ascq;
+}
+
+static void stex_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ /* "Invalid field in cbd" */
+ stex_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ done(cmd);
+}
+
+static struct req_msg *stex_alloc_req(struct st_hba *hba)
+{
+ struct req_msg *req = ((struct req_msg *)hba->dma_mem) +
+ hba->req_head;
+
+ ++hba->req_head;
+ hba->req_head %= MU_REQ_COUNT;
+
+ return req;
+}
+
+static int stex_map_sg(struct st_hba *hba,
+ struct req_msg *req, struct st_ccb *ccb)
+{
+ struct pci_dev *pdev = hba->pdev;
+ struct scsi_cmnd *cmd;
+ dma_addr_t dma_handle;
+ struct scatterlist *src;
+ struct st_sgtable *dst;
+ int i;
+
+ cmd = ccb->cmd;
+ dst = (struct st_sgtable *)req->variable;
+ dst->max_sg_count = cpu_to_le16(ST_MAX_SG);
+ dst->sz_in_byte = cpu_to_le32(cmd->request_bufflen);
+
+ if (cmd->use_sg) {
+ int n_elem;
+
+ src = (struct scatterlist *) cmd->request_buffer;
+ n_elem = pci_map_sg(pdev, src,
+ cmd->use_sg, cmd->sc_data_direction);
+ if (n_elem <= 0)
+ return -EIO;
+
+ ccb->sg_count = n_elem;
+ dst->sg_count = cpu_to_le16((u16)n_elem);
+
+ for (i = 0; i < n_elem; i++, src++) {
+ dst->table[i].count = cpu_to_le32((u32)sg_dma_len(src));
+ dst->table[i].addr =
+ cpu_to_le32(sg_dma_address(src) & 0xffffffff);
+ dst->table[i].addr_hi =
+ cpu_to_le32((sg_dma_address(src) >> 16) >> 16);
+ dst->table[i].ctrl = SG_CF_64B | SG_CF_HOST;
+ }
+ dst->table[--i].ctrl |= SG_CF_EOT;
+ return 0;
+ }
+
+ dma_handle = pci_map_single(pdev, cmd->request_buffer,
+ cmd->request_bufflen, cmd->sc_data_direction);
+ cmd->SCp.dma_handle = dma_handle;
+
+ ccb->sg_count = 1;
+ dst->sg_count = cpu_to_le16(1);
+ dst->table[0].addr = cpu_to_le32(dma_handle & 0xffffffff);
+ dst->table[0].addr_hi = cpu_to_le32((dma_handle >> 16) >> 16);
+ dst->table[0].count = cpu_to_le32((u32)cmd->request_bufflen);
+ dst->table[0].ctrl = SG_CF_EOT | SG_CF_64B | SG_CF_HOST;
+
+ return 0;
+}
+
+static void stex_internal_copy(struct scsi_cmnd *cmd,
+ const void *src, size_t *count, int sg_count)
+{
+ size_t lcount;
+ size_t len;
+ void *s, *d, *base = NULL;
+ if (*count > cmd->request_bufflen)
+ *count = cmd->request_bufflen;
+ lcount = *count;
+ while (lcount) {
+ len = lcount;
+ s = (void *)src;
+ if (cmd->use_sg) {
+ size_t offset = *count - lcount;
+ s += offset;
+ base = scsi_kmap_atomic_sg(cmd->request_buffer,
+ sg_count, &offset, &len);
+ if (base == NULL) {
+ *count -= lcount;
+ return;
+ }
+ d = base + offset;
+ } else
+ d = cmd->request_buffer;
+
+ memcpy(d, s, len);
+
+ lcount -= len;
+ if (cmd->use_sg)
+ scsi_kunmap_atomic_sg(base);
+ }
+}
+
+static int stex_direct_copy(struct scsi_cmnd *cmd,
+ const void *src, size_t count)
+{
+ struct st_hba *hba = (struct st_hba *) &cmd->device->host->hostdata[0];
+ size_t cp_len = count;
+ int n_elem = 0;
+
+ if (cmd->use_sg) {
+ n_elem = pci_map_sg(hba->pdev, cmd->request_buffer,
+ cmd->use_sg, cmd->sc_data_direction);
+ if (n_elem <= 0)
+ return 0;
+ }
+
+ stex_internal_copy(cmd, src, &cp_len, n_elem);
+
+ if (cmd->use_sg)
+ pci_unmap_sg(hba->pdev, cmd->request_buffer,
+ cmd->use_sg, cmd->sc_data_direction);
+ return cp_len == count;
+}
+
+static void stex_controller_info(struct st_hba *hba, struct st_ccb *ccb)
+{
+ struct st_frame *p;
+ size_t count = sizeof(struct st_frame);
+
+ p = hba->copy_buffer;
+ memset(p->base, 0, sizeof(u32)*6);
+ *(unsigned long *)(p->base) = pci_resource_start(hba->pdev, 0);
+ p->rom_addr = 0;
+
+ p->drv_ver.major = ST_VER_MAJOR;
+ p->drv_ver.minor = ST_VER_MINOR;
+ p->drv_ver.oem = ST_OEM;
+ p->drv_ver.build = ST_BUILD_VER;
+
+ p->bus = hba->pdev->bus->number;
+ p->slot = hba->pdev->devfn;
+ p->irq_level = 0;
+ p->irq_vec = hba->pdev->irq;
+ p->id = hba->pdev->vendor << 16 | hba->pdev->device;
+ p->subid =
+ hba->pdev->subsystem_vendor << 16 | hba->pdev->subsystem_device;
+
+ stex_internal_copy(ccb->cmd, p, &count, ccb->sg_count);
+}
+
+static void
+stex_send_cmd(struct st_hba *hba, struct req_msg *req, u16 tag)
+{
+ req->tag = cpu_to_le16(tag);
+ req->task_attr = TASK_ATTRIBUTE_SIMPLE;
+ req->task_manage = 0; /* not supported yet */
+ req->payload_sz = (u8)(sizeof(struct req_msg)/sizeof(u32));
+
+ hba->ccb[tag].req = req;
+ hba->out_req_cnt++;
+
+ writel(hba->req_head, hba->mmio_base + IMR0);
+ writel(MU_INBOUND_DOORBELL_REQHEADCHANGED, hba->mmio_base + IDBL);
+ readl(hba->mmio_base + IDBL); /* flush */
+}
+
+static int
+stex_slave_alloc(struct scsi_device *sdev)
+{
+ /* Cheat: usually extracted from Inquiry data */
+ sdev->tagged_supported = 1;
+
+ scsi_activate_tcq(sdev, sdev->host->can_queue);
+
+ return 0;
+}
+
+static int
+stex_slave_config(struct scsi_device *sdev)
+{
+ sdev->use_10_for_rw = 1;
+ sdev->use_10_for_ms = 1;
+ sdev->timeout = 60 * HZ;
+ sdev->tagged_supported = 1;
+
+ return 0;
+}
+
+static void
+stex_slave_destroy(struct scsi_device *sdev)
+{
+ scsi_deactivate_tcq(sdev, 1);
+}
+
+static int
+stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+{
+ struct st_hba *hba;
+ struct Scsi_Host *host;
+ unsigned int id,lun;
+ struct req_msg *req;
+ u16 tag;
+ host = cmd->device->host;
+ id = cmd->device->id;
+ lun = cmd->device->channel; /* firmware lun issue work around */
+ hba = (struct st_hba *) &host->hostdata[0];
+
+ switch (cmd->cmnd[0]) {
+ case MODE_SENSE_10:
+ {
+ static char ms10_caching_page[12] =
+ { 0, 0x12, 0, 0, 0, 0, 0, 0, 0x8, 0xa, 0x4, 0 };
+ unsigned char page;
+ page = cmd->cmnd[2] & 0x3f;
+ if (page == 0x8 || page == 0x3f) {
+ stex_direct_copy(cmd, ms10_caching_page,
+ sizeof(ms10_caching_page));
+ cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ done(cmd);
+ } else
+ stex_invalid_field(cmd, done);
+ return 0;
+ }
+ case INQUIRY:
+ if (id != ST_MAX_ARRAY_SUPPORTED)
+ break;
+ if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) {
+ stex_direct_copy(cmd, console_inq_page,
+ sizeof(console_inq_page));
+ cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ done(cmd);
+ } else
+ stex_invalid_field(cmd, done);
+ return 0;
+ case PASSTHRU_CMD:
+ if (cmd->cmnd[1] == PASSTHRU_GET_DRVVER) {
+ struct st_drvver ver;
+ ver.major = ST_VER_MAJOR;
+ ver.minor = ST_VER_MINOR;
+ ver.oem = ST_OEM;
+ ver.build = ST_BUILD_VER;
+ ver.signature[0] = PASSTHRU_SIGNATURE;
+ ver.console_id = ST_MAX_ARRAY_SUPPORTED;
+ ver.host_no = hba->host->host_no;
+ cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ?
+ DID_OK << 16 | COMMAND_COMPLETE << 8 :
+ DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ done(cmd);
+ return 0;
+ }
+ default:
+ break;
+ }
+
+ cmd->scsi_done = done;
+
+ tag = cmd->request->tag;
+
+ if (unlikely(tag >= host->can_queue))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ req = stex_alloc_req(hba);
+ req->lun = lun;
+ req->target = id;
+
+ /* cdb */
+ memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH);
+
+ hba->ccb[tag].cmd = cmd;
+ hba->ccb[tag].sense_bufflen = SCSI_SENSE_BUFFERSIZE;
+ hba->ccb[tag].sense_buffer = cmd->sense_buffer;
+ hba->ccb[tag].req_type = 0;
+
+ if (cmd->sc_data_direction != DMA_NONE)
+ stex_map_sg(hba, req, &hba->ccb[tag]);
+
+ stex_send_cmd(hba, req, tag);
+ return 0;
+}
+
+static void stex_unmap_sg(struct st_hba *hba, struct scsi_cmnd *cmd)
+{
+ if (cmd->sc_data_direction != DMA_NONE) {
+ if (cmd->use_sg)
+ pci_unmap_sg(hba->pdev, cmd->request_buffer,
+ cmd->use_sg, cmd->sc_data_direction);
+ else
+ pci_unmap_single(hba->pdev, cmd->SCp.dma_handle,
+ cmd->request_bufflen, cmd->sc_data_direction);
+ }
+}
+
+static void stex_scsi_done(struct st_ccb *ccb)
+{
+ struct scsi_cmnd *cmd = ccb->cmd;
+ int result;
+
+ if (ccb->srb_status == SRB_STATUS_SUCCESS || ccb->srb_status == 0) {
+ result = ccb->scsi_status;
+ switch (ccb->scsi_status) {
+ case SAM_STAT_GOOD:
+ result |= DID_OK << 16 | COMMAND_COMPLETE << 8;
+ break;
+ case SAM_STAT_CHECK_CONDITION:
+ result |= DRIVER_SENSE << 24;
+ break;
+ case SAM_STAT_BUSY:
+ result |= DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
+ break;
+ default:
+ result |= DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ break;
+ }
+ }
+ else if (ccb->srb_status & SRB_SEE_SENSE)
+ result = DRIVER_SENSE << 24 | SAM_STAT_CHECK_CONDITION;
+ else switch (ccb->srb_status) {
+ case SRB_STATUS_SELECTION_TIMEOUT:
+ result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
+ break;
+ case SRB_STATUS_BUSY:
+ result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
+ break;
+ case SRB_STATUS_INVALID_REQUEST:
+ case SRB_STATUS_ERROR:
+ default:
+ result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ break;
+ }
+
+ cmd->result = result;
+ cmd->scsi_done(cmd);
+}
+
+static void stex_copy_data(struct st_ccb *ccb,
+ struct status_msg *resp, unsigned int variable)
+{
+ size_t count = variable;
+ if (resp->scsi_status != SAM_STAT_GOOD) {
+ if (ccb->sense_buffer != NULL)
+ memcpy(ccb->sense_buffer, resp->variable,
+ min(variable, ccb->sense_bufflen));
+ return;
+ }
+
+ if (ccb->cmd == NULL)
+ return;
+ stex_internal_copy(ccb->cmd, resp->variable, &count, ccb->sg_count);
+}
+
+static void stex_mu_intr(struct st_hba *hba, u32 doorbell)
+{
+ void __iomem *base = hba->mmio_base;
+ struct status_msg *resp;
+ struct st_ccb *ccb;
+ unsigned int size;
+ u16 tag;
+
+ if (!(doorbell & MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED))
+ return;
+
+ /* status payloads */
+ hba->status_head = readl(base + OMR1);
+ if (unlikely(hba->status_head >= MU_STATUS_COUNT)) {
+ printk(KERN_WARNING DRV_NAME "(%s): invalid status head\n",
+ pci_name(hba->pdev));
+ return;
+ }
+
+ if (unlikely(hba->mu_status != MU_STATE_STARTED ||
+ hba->out_req_cnt <= 0)) {
+ hba->status_tail = hba->status_head;
+ goto update_status;
+ }
+
+ while (hba->status_tail != hba->status_head) {
+ resp = stex_get_status(hba);
+ tag = le16_to_cpu(resp->tag);
+ if (unlikely(tag >= hba->host->can_queue)) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): invalid tag\n", pci_name(hba->pdev));
+ continue;
+ }
+
+ ccb = &hba->ccb[tag];
+ if (hba->wait_ccb == ccb)
+ hba->wait_ccb = NULL;
+ if (unlikely(ccb->req == NULL)) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): lagging req\n", pci_name(hba->pdev));
+ continue;
+ }
+
+ size = resp->payload_sz * sizeof(u32); /* payload size */
+ if (unlikely(size < sizeof(*resp) - STATUS_VAR_LEN ||
+ size > sizeof(*resp))) {
+ printk(KERN_WARNING DRV_NAME "(%s): bad status size\n",
+ pci_name(hba->pdev));
+ } else {
+ size -= sizeof(*resp) - STATUS_VAR_LEN; /* copy size */
+ if (size)
+ stex_copy_data(ccb, resp, size);
+ }
+
+ ccb->srb_status = resp->srb_status;
+ ccb->scsi_status = resp->scsi_status;
+
+ if (likely(ccb->cmd != NULL)) {
+ if (unlikely(ccb->cmd->cmnd[0] == PASSTHRU_CMD &&
+ ccb->cmd->cmnd[1] == PASSTHRU_GET_ADAPTER))
+ stex_controller_info(hba, ccb);
+ stex_unmap_sg(hba, ccb->cmd);
+ stex_scsi_done(ccb);
+ hba->out_req_cnt--;
+ } else if (ccb->req_type & PASSTHRU_REQ_TYPE) {
+ hba->out_req_cnt--;
+ if (ccb->req_type & PASSTHRU_REQ_NO_WAKEUP) {
+ ccb->req_type = 0;
+ continue;
+ }
+ ccb->req_type = 0;
+ if (waitqueue_active(&hba->waitq))
+ wake_up(&hba->waitq);
+ }
+ }
+
+update_status:
+ writel(hba->status_head, base + IMR1);
+ readl(base + IMR1); /* flush */
+}
+
+static irqreturn_t stex_intr(int irq, void *__hba, struct pt_regs *regs)
+{
+ struct st_hba *hba = __hba;
+ void __iomem *base = hba->mmio_base;
+ u32 data;
+ unsigned long flags;
+ int handled = 0;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+
+ data = readl(base + ODBL);
+
+ if (data && data != 0xffffffff) {
+ /* clear the interrupt */
+ writel(data, base + ODBL);
+ readl(base + ODBL); /* flush */
+ stex_mu_intr(hba, data);
+ handled = 1;
+ }
+
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+static int stex_handshake(struct st_hba *hba)
+{
+ void __iomem *base = hba->mmio_base;
+ struct handshake_frame *h;
+ dma_addr_t status_phys;
+ int i;
+
+ if (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
+ writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL);
+ readl(base + IDBL);
+ for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
+ && i < MU_MAX_DELAY_TIME; i++) {
+ rmb();
+ msleep(1);
+ }
+
+ if (i == MU_MAX_DELAY_TIME) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): no handshake signature\n",
+ pci_name(hba->pdev));
+ return -1;
+ }
+ }
+
+ udelay(10);
+
+ h = (struct handshake_frame *)(hba->dma_mem + MU_REQ_BUFFER_SIZE);
+ h->rb_phy = cpu_to_le32(hba->dma_handle);
+ h->rb_phy_hi = cpu_to_le32((hba->dma_handle >> 16) >> 16);
+ h->req_sz = cpu_to_le16(sizeof(struct req_msg));
+ h->req_cnt = cpu_to_le16(MU_REQ_COUNT);
+ h->status_sz = cpu_to_le16(sizeof(struct status_msg));
+ h->status_cnt = cpu_to_le16(MU_STATUS_COUNT);
+ stex_gettime(&h->hosttime);
+ h->partner_type = HMU_PARTNER_TYPE;
+
+ status_phys = hba->dma_handle + MU_REQ_BUFFER_SIZE;
+ writel(status_phys, base + IMR0);
+ readl(base + IMR0);
+ writel((status_phys >> 16) >> 16, base + IMR1);
+ readl(base + IMR1);
+
+ writel((status_phys >> 16) >> 16, base + OMR0); /* old fw compatible */
+ readl(base + OMR0);
+ writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL);
+ readl(base + IDBL); /* flush */
+
+ udelay(10);
+ for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
+ && i < MU_MAX_DELAY_TIME; i++) {
+ rmb();
+ msleep(1);
+ }
+
+ if (i == MU_MAX_DELAY_TIME) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): no signature after handshake frame\n",
+ pci_name(hba->pdev));
+ return -1;
+ }
+
+ writel(0, base + IMR0);
+ readl(base + IMR0);
+ writel(0, base + OMR0);
+ readl(base + OMR0);
+ writel(0, base + IMR1);
+ readl(base + IMR1);
+ writel(0, base + OMR1);
+ readl(base + OMR1); /* flush */
+ hba->mu_status = MU_STATE_STARTED;
+ return 0;
+}
+
+static int stex_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct st_hba *hba = (struct st_hba *)host->hostdata;
+ u16 tag = cmd->request->tag;
+ void __iomem *base;
+ u32 data;
+ int result = SUCCESS;
+ unsigned long flags;
+ base = hba->mmio_base;
+ spin_lock_irqsave(host->host_lock, flags);
+ if (tag < host->can_queue && hba->ccb[tag].cmd == cmd)
+ hba->wait_ccb = &hba->ccb[tag];
+ else {
+ for (tag = 0; tag < host->can_queue; tag++)
+ if (hba->ccb[tag].cmd == cmd) {
+ hba->wait_ccb = &hba->ccb[tag];
+ break;
+ }
+ if (tag >= host->can_queue)
+ goto out;
+ }
+
+ data = readl(base + ODBL);
+ if (data == 0 || data == 0xffffffff)
+ goto fail_out;
+
+ writel(data, base + ODBL);
+ readl(base + ODBL); /* flush */
+
+ stex_mu_intr(hba, data);
+
+ if (hba->wait_ccb == NULL) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): lost interrupt\n", pci_name(hba->pdev));
+ goto out;
+ }
+
+fail_out:
+ stex_unmap_sg(hba, cmd);
+ hba->wait_ccb->req = NULL; /* nullify the req's future return */
+ hba->wait_ccb = NULL;
+ result = FAILED;
+out:
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return result;
+}
+
+static void stex_hard_reset(struct st_hba *hba)
+{
+ struct pci_bus *bus;
+ int i;
+ u16 pci_cmd;
+ u8 pci_bctl;
+
+ for (i = 0; i < 16; i++)
+ pci_read_config_dword(hba->pdev, i * 4,
+ &hba->pdev->saved_config_space[i]);
+
+ /* Reset secondary bus. Our controller(MU/ATU) is the only device on
+ secondary bus. Consult Intel 80331/3 developer's manual for detail */
+ bus = hba->pdev->bus;
+ pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl);
+ pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
+ msleep(1);
+ pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
+
+ for (i = 0; i < MU_MAX_DELAY_TIME; i++) {
+ pci_read_config_word(hba->pdev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_MASTER)
+ break;
+ msleep(1);
+ }
+
+ ssleep(5);
+ for (i = 0; i < 16; i++)
+ pci_write_config_dword(hba->pdev, i * 4,
+ hba->pdev->saved_config_space[i]);
+}
+
+static int stex_reset(struct scsi_cmnd *cmd)
+{
+ struct st_hba *hba;
+ unsigned long flags;
+ hba = (struct st_hba *) &cmd->device->host->hostdata[0];
+
+ hba->mu_status = MU_STATE_RESETTING;
+
+ if (hba->cardtype == st_shasta)
+ stex_hard_reset(hba);
+
+ if (stex_handshake(hba)) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): resetting: handshake failed\n",
+ pci_name(hba->pdev));
+ return FAILED;
+ }
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ hba->req_head = 0;
+ hba->req_tail = 0;
+ hba->status_head = 0;
+ hba->status_tail = 0;
+ hba->out_req_cnt = 0;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ return SUCCESS;
+}
+
+static int stex_biosparam(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity, int geom[])
+{
+ int heads = 255, sectors = 63, cylinders;
+
+ if (capacity < 0x200000) {
+ heads = 64;
+ sectors = 32;
+ }
+
+ cylinders = sector_div(capacity, heads * sectors);
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+}
+
+static struct scsi_host_template driver_template = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .proc_name = DRV_NAME,
+ .bios_param = stex_biosparam,
+ .queuecommand = stex_queuecommand,
+ .slave_alloc = stex_slave_alloc,
+ .slave_configure = stex_slave_config,
+ .slave_destroy = stex_slave_destroy,
+ .eh_abort_handler = stex_abort,
+ .eh_host_reset_handler = stex_reset,
+ .can_queue = ST_CAN_QUEUE,
+ .this_id = -1,
+ .sg_tablesize = ST_MAX_SG,
+ .cmd_per_lun = ST_CMD_PER_LUN,
+};
+
+static int stex_set_dma_mask(struct pci_dev * pdev)
+{
+ int ret;
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+ && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ return 0;
+ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (!ret)
+ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ return ret;
+}
+
+static int __devinit
+stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct st_hba *hba;
+ struct Scsi_Host *host;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ host = scsi_host_alloc(&driver_template, sizeof(struct st_hba));
+
+ if (!host) {
+ printk(KERN_ERR DRV_NAME "(%s): scsi_host_alloc failed\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_disable;
+ }
+
+ hba = (struct st_hba *)host->hostdata;
+ memset(hba, 0, sizeof(struct st_hba));
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err < 0) {
+ printk(KERN_ERR DRV_NAME "(%s): request regions failed\n",
+ pci_name(pdev));
+ goto out_scsi_host_put;
+ }
+
+ hba->mmio_base = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if ( !hba->mmio_base) {
+ printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ err = stex_set_dma_mask(pdev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "(%s): set dma mask failed\n",
+ pci_name(pdev));
+ goto out_iounmap;
+ }
+
+ hba->dma_mem = dma_alloc_coherent(&pdev->dev,
+ STEX_BUFFER_SIZE, &hba->dma_handle, GFP_KERNEL);
+ if (!hba->dma_mem) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
+ pci_name(pdev));
+ goto out_iounmap;
+ }
+
+ hba->status_buffer =
+ (struct status_msg *)(hba->dma_mem + MU_REQ_BUFFER_SIZE);
+ hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE;
+ hba->mu_status = MU_STATE_STARTING;
+
+ hba->cardtype = (unsigned int) id->driver_data;
+
+ /* firmware uses id/lun pair for a logical drive, but lun would be
+ always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
+ channel to map lun here */
+ host->max_channel = ST_MAX_LUN_PER_TARGET - 1;
+ host->max_id = ST_MAX_TARGET_NUM;
+ host->max_lun = 1;
+ host->unique_id = host->host_no;
+ host->max_cmd_len = STEX_CDB_LENGTH;
+
+ hba->host = host;
+ hba->pdev = pdev;
+ init_waitqueue_head(&hba->waitq);
+
+ err = request_irq(pdev->irq, stex_intr, IRQF_SHARED, DRV_NAME, hba);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "(%s): request irq failed\n",
+ pci_name(pdev));
+ goto out_pci_free;
+ }
+
+ err = stex_handshake(hba);
+ if (err)
+ goto out_free_irq;
+
+ err = scsi_init_shared_tag_map(host, ST_CAN_QUEUE);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "(%s): init shared queue failed\n",
+ pci_name(pdev));
+ goto out_free_irq;
+ }
+
+ pci_set_drvdata(pdev, hba);
+
+ err = scsi_add_host(host, &pdev->dev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "(%s): scsi_add_host failed\n",
+ pci_name(pdev));
+ goto out_free_irq;
+ }
+
+ scsi_scan_host(host);
+
+ return 0;
+
+out_free_irq:
+ free_irq(pdev->irq, hba);
+out_pci_free:
+ dma_free_coherent(&pdev->dev, STEX_BUFFER_SIZE,
+ hba->dma_mem, hba->dma_handle);
+out_iounmap:
+ iounmap(hba->mmio_base);
+out_release_regions:
+ pci_release_regions(pdev);
+out_scsi_host_put:
+ scsi_host_put(host);
+out_disable:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void stex_hba_stop(struct st_hba *hba)
+{
+ struct req_msg *req;
+ unsigned long flags;
+ unsigned long before;
+ u16 tag = 0;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ req = stex_alloc_req(hba);
+ memset(req->cdb, 0, STEX_CDB_LENGTH);
+
+ req->cdb[0] = CONTROLLER_CMD;
+ req->cdb[1] = CTLR_POWER_STATE_CHANGE;
+ req->cdb[2] = CTLR_POWER_SAVING;
+
+ hba->ccb[tag].cmd = NULL;
+ hba->ccb[tag].sg_count = 0;
+ hba->ccb[tag].sense_bufflen = 0;
+ hba->ccb[tag].sense_buffer = NULL;
+ hba->ccb[tag].req_type |= PASSTHRU_REQ_TYPE;
+
+ stex_send_cmd(hba, req, tag);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ before = jiffies;
+ while (hba->ccb[tag].req_type & PASSTHRU_REQ_TYPE) {
+ if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ))
+ return;
+ msleep(10);
+ }
+}
+
+static void stex_hba_free(struct st_hba *hba)
+{
+ free_irq(hba->pdev->irq, hba);
+
+ iounmap(hba->mmio_base);
+
+ pci_release_regions(hba->pdev);
+
+ dma_free_coherent(&hba->pdev->dev, STEX_BUFFER_SIZE,
+ hba->dma_mem, hba->dma_handle);
+}
+
+static void stex_remove(struct pci_dev *pdev)
+{
+ struct st_hba *hba = pci_get_drvdata(pdev);
+
+ scsi_remove_host(hba->host);
+
+ pci_set_drvdata(pdev, NULL);
+
+ stex_hba_stop(hba);
+
+ stex_hba_free(hba);
+
+ scsi_host_put(hba->host);
+
+ pci_disable_device(pdev);
+}
+
+static void stex_shutdown(struct pci_dev *pdev)
+{
+ struct st_hba *hba = pci_get_drvdata(pdev);
+
+ stex_hba_stop(hba);
+}
+
+static struct pci_device_id stex_pci_tbl[] = {
+ { 0x105a, 0x8350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0xc350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0xf350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x4302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x8301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x8302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x1725, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc },
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, stex_pci_tbl);
+
+static struct pci_driver stex_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = stex_pci_tbl,
+ .probe = stex_probe,
+ .remove = __devexit_p(stex_remove),
+ .shutdown = stex_shutdown,
+};
+
+static int __init stex_init(void)
+{
+ printk(KERN_INFO DRV_NAME
+ ": Promise SuperTrak EX Driver version: %s\n",
+ ST_DRIVER_VERSION);
+
+ return pci_register_driver(&stex_pci_driver);
+}
+
+static void __exit stex_exit(void)
+{
+ pci_unregister_driver(&stex_pci_driver);
+}
+
+module_init(stex_init);
+module_exit(stex_exit);
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index e681681..0372aa9 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -196,8 +196,8 @@
u32 sense_data PACKED;
/* The following fields are for software only. They are included in
the MSCP structure because they are associated with SCSI requests. */
- void (*done)(Scsi_Cmnd *);
- Scsi_Cmnd *SCint;
+ void (*done) (struct scsi_cmnd *);
+ struct scsi_cmnd *SCint;
ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */
};
@@ -289,7 +289,7 @@
static void ultrastor_interrupt(int, void *, struct pt_regs *);
static irqreturn_t do_ultrastor_interrupt(int, void *, struct pt_regs *);
-static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt);
+static inline void build_sg_list(struct mscp *, struct scsi_cmnd *SCpnt);
/* Always called with host lock held */
@@ -673,7 +673,7 @@
return buf;
}
-static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt)
+static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt)
{
struct scatterlist *sl;
long transfer_length = 0;
@@ -694,7 +694,8 @@
mscp->transfer_data_length = transfer_length;
}
-static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done) (struct scsi_cmnd *))
{
struct mscp *my_mscp;
#if ULTRASTOR_MAX_CMDS > 1
@@ -833,7 +834,7 @@
*/
-static int ultrastor_abort(Scsi_Cmnd *SCpnt)
+static int ultrastor_abort(struct scsi_cmnd *SCpnt)
{
#if ULTRASTOR_DEBUG & UD_ABORT
char out[108];
@@ -843,7 +844,7 @@
unsigned int mscp_index;
unsigned char old_aborted;
unsigned long flags;
- void (*done)(Scsi_Cmnd *);
+ void (*done)(struct scsi_cmnd *);
struct Scsi_Host *host = SCpnt->device->host;
if(config.slot)
@@ -960,7 +961,7 @@
return SUCCESS;
}
-static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
+static int ultrastor_host_reset(struct scsi_cmnd * SCpnt)
{
unsigned long flags;
int i;
@@ -1045,8 +1046,8 @@
unsigned int mscp_index;
#endif
struct mscp *mscp;
- void (*done)(Scsi_Cmnd *);
- Scsi_Cmnd *SCtmp;
+ void (*done) (struct scsi_cmnd *);
+ struct scsi_cmnd *SCtmp;
#if ULTRASTOR_MAX_CMDS == 1
mscp = &config.mscp[0];
@@ -1079,7 +1080,7 @@
return;
}
if (icm_status == 3) {
- void (*done)(Scsi_Cmnd *) = mscp->done;
+ void (*done)(struct scsi_cmnd *) = mscp->done;
if (done) {
mscp->done = NULL;
mscp->SCint->result = DID_ABORT << 16;
diff --git a/drivers/scsi/ultrastor.h b/drivers/scsi/ultrastor.h
index da759a1..a692905 100644
--- a/drivers/scsi/ultrastor.h
+++ b/drivers/scsi/ultrastor.h
@@ -14,11 +14,13 @@
#define _ULTRASTOR_H
static int ultrastor_detect(struct scsi_host_template *);
-static const char *ultrastor_info(struct Scsi_Host * shpnt);
-static int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-static int ultrastor_abort(Scsi_Cmnd *);
-static int ultrastor_host_reset(Scsi_Cmnd *);
-static int ultrastor_biosparam(struct scsi_device *, struct block_device *, sector_t, int *);
+static const char *ultrastor_info(struct Scsi_Host *shpnt);
+static int ultrastor_queuecommand(struct scsi_cmnd *,
+ void (*done)(struct scsi_cmnd *));
+static int ultrastor_abort(struct scsi_cmnd *);
+static int ultrastor_host_reset(struct scsi_cmnd *);
+static int ultrastor_biosparam(struct scsi_device *, struct block_device *,
+ sector_t, int *);
#define ULTRASTOR_14F_MAX_SG 16
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 96c9040..c773ee5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -746,6 +746,8 @@
extern int blk_queue_resize_tags(request_queue_t *, int);
extern void blk_queue_invalidate_tags(request_queue_t *);
extern long blk_congestion_wait(int rw, long timeout);
+extern struct blk_queue_tag *blk_init_tags(int);
+extern void blk_free_tags(struct blk_queue_tag *);
extern void blk_congestion_end(int rw);
extern void blk_rq_bio_prep(request_queue_t *, struct request *, struct bio *);
diff --git a/include/linux/module.h b/include/linux/module.h
index 0dfb794..d4486cc 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -156,6 +156,11 @@
*/
#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
+/* Optional firmware file (or files) needed by the module
+ * format is simply firmware file name. Multiple firmware
+ * files require multiple MODULE_FIRMWARE() specifiers */
+#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
+
/* Given an address, look for it in the exception tables */
const struct exception_table_entry *search_exception_tables(unsigned long add);
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 855b446..6641162 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -21,6 +21,8 @@
#define NETLINK_DNRTMSG 14 /* DECnet routing messages */
#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */
#define NETLINK_GENERIC 16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */
#define MAX_LINKS 32
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 7a24915..6a1e098 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2010,6 +2010,23 @@
#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
+#define PCI_VENDOR_ID_ARECA 0x17d3
+#define PCI_DEVICE_ID_ARECA_1110 0x1110
+#define PCI_DEVICE_ID_ARECA_1120 0x1120
+#define PCI_DEVICE_ID_ARECA_1130 0x1130
+#define PCI_DEVICE_ID_ARECA_1160 0x1160
+#define PCI_DEVICE_ID_ARECA_1170 0x1170
+#define PCI_DEVICE_ID_ARECA_1210 0x1210
+#define PCI_DEVICE_ID_ARECA_1220 0x1220
+#define PCI_DEVICE_ID_ARECA_1230 0x1230
+#define PCI_DEVICE_ID_ARECA_1260 0x1260
+#define PCI_DEVICE_ID_ARECA_1270 0x1270
+#define PCI_DEVICE_ID_ARECA_1280 0x1280
+#define PCI_DEVICE_ID_ARECA_1380 0x1380
+#define PCI_DEVICE_ID_ARECA_1381 0x1381
+#define PCI_DEVICE_ID_ARECA_1680 0x1680
+#define PCI_DEVICE_ID_ARECA_1681 0x1681
+
#define PCI_VENDOR_ID_S2IO 0x17d5
#define PCI_DEVICE_ID_S2IO_WIN 0x5731
#define PCI_DEVICE_ID_S2IO_UNI 0x5831
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 41904f6..401192e 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -102,6 +102,8 @@
uint32_t unsol_datasn;
int imm_count; /* imm-data (bytes) */
int unsol_count; /* unsolicited (bytes)*/
+ /* offset in unsolicited stream (bytes); */
+ int unsol_offset;
int data_count; /* remaining Data-Out */
struct scsi_cmnd *sc; /* associated SCSI cmd*/
int total_length;
@@ -110,6 +112,7 @@
/* state set/tested under session->lock */
int state;
+ atomic_t refcount;
struct list_head running; /* running cmd list */
void *dd_data; /* driver/transport data */
};
@@ -290,8 +293,7 @@
extern int iscsi_check_assign_cmdsn(struct iscsi_session *,
struct iscsi_nopin *);
extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *,
- struct iscsi_data *hdr,
- int transport_data_cnt);
+ struct iscsi_data *hdr);
extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
char *, uint32_t);
extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 0000000..8e39982
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,627 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/list.h>
+#include <asm/semaphore.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+
+struct block_device;
+
+enum sas_class {
+ SAS,
+ EXPANDER
+};
+
+enum sas_phy_role {
+ PHY_ROLE_NONE = 0,
+ PHY_ROLE_TARGET = 0x40,
+ PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+ PHY_TYPE_PHYSICAL,
+ PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+ HAE_RESET = 0U,
+ HA_NUM_EVENTS = 1,
+};
+
+enum port_event {
+ PORTE_BYTES_DMAED = 0U,
+ PORTE_BROADCAST_RCVD = 1,
+ PORTE_LINK_RESET_ERR = 2,
+ PORTE_TIMER_EVENT = 3,
+ PORTE_HARD_RESET = 4,
+ PORT_NUM_EVENTS = 5,
+};
+
+enum phy_event {
+ PHYE_LOSS_OF_SIGNAL = 0U,
+ PHYE_OOB_DONE = 1,
+ PHYE_OOB_ERROR = 2,
+ PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
+ PHY_NUM_EVENTS = 4,
+};
+
+enum discover_event {
+ DISCE_DISCOVER_DOMAIN = 0U,
+ DISCE_REVALIDATE_DOMAIN = 1,
+ DISCE_PORT_GONE = 2,
+ DISC_NUM_EVENTS = 3,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define ETASK 0xFA
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
+ attr)
+
+enum routing_attribute {
+ DIRECT_ROUTING,
+ SUBTRACTIVE_ROUTING,
+ TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+ PHY_EMPTY,
+ PHY_VACANT,
+ PHY_NOT_PRESENT,
+ PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+ int phy_id;
+
+ enum ex_phy_state phy_state;
+
+ enum sas_dev_type attached_dev_type;
+ enum sas_linkrate linkrate;
+
+ u8 attached_sata_host:1;
+ u8 attached_sata_dev:1;
+ u8 attached_sata_ps:1;
+
+ enum sas_proto attached_tproto;
+ enum sas_proto attached_iproto;
+
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u8 attached_phy_id;
+
+ u8 phy_change_count;
+ enum routing_attribute routing_attr;
+ u8 virtual:1;
+
+ int last_da_index;
+
+ struct sas_phy *phy;
+ struct sas_port *port;
+};
+
+struct expander_device {
+ struct list_head children;
+
+ u16 ex_change_count;
+ u16 max_route_indexes;
+ u8 num_phys;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+ u8 enclosure_logical_id[8];
+
+ struct ex_phy *ex_phy;
+ struct sas_port *parent_port;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+ ATA_COMMAND_SET = 0,
+ ATAPI_COMMAND_SET = 1,
+};
+
+struct sata_device {
+ enum ata_command_set command_set;
+ struct smp_resp rps_resp; /* report_phy_sata_resp */
+ __le16 *identify_device;
+ __le16 *identify_packet_device;
+
+ u8 port_no; /* port number, if this is a PM (Port) */
+ struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- Domain device ---------- */
+struct domain_device {
+ enum sas_dev_type dev_type;
+
+ enum sas_linkrate linkrate;
+ enum sas_linkrate min_linkrate;
+ enum sas_linkrate max_linkrate;
+
+ int pathways;
+
+ struct domain_device *parent;
+ struct list_head siblings; /* devices on the same level */
+ struct asd_sas_port *port; /* shortcut to root of the tree */
+
+ struct list_head dev_list_node;
+
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ struct sas_rphy *rphy;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ u8 frame_rcvd[32];
+
+ union {
+ struct expander_device ex_dev;
+ struct sata_device sata_dev; /* STP & directly attached */
+ };
+
+ void *lldd_dev;
+};
+
+struct sas_discovery {
+ spinlock_t disc_event_lock;
+ struct work_struct disc_work[DISC_NUM_EVENTS];
+ unsigned long pending;
+ u8 fanout_sas_addr[8];
+ u8 eeds_a[8];
+ u8 eeds_b[8];
+ int max_level;
+};
+
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+ struct completion port_gone_completion;
+
+ struct sas_discovery disc;
+ struct domain_device *port_dev;
+ spinlock_t dev_list_lock;
+ struct list_head dev_list;
+ enum sas_linkrate linkrate;
+
+ struct sas_phy *phy;
+ struct work_struct work;
+
+/* public: */
+ int id;
+
+ enum sas_class class;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_oob_mode oob_mode;
+
+ spinlock_t phy_list_lock;
+ struct list_head phy_list;
+ int num_phys;
+ u32 phy_mask;
+
+ struct sas_ha_struct *ha;
+
+ struct sas_port *port;
+
+ void *lldd_port; /* not touched by the sas class code */
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+ /* protected by ha->event_lock */
+ struct work_struct port_events[PORT_NUM_EVENTS];
+ struct work_struct phy_events[PHY_NUM_EVENTS];
+
+ unsigned long port_events_pending;
+ unsigned long phy_events_pending;
+
+ int error;
+
+ struct sas_phy *phy;
+
+/* public: */
+ /* The following are class:RO, driver:R/W */
+ int enabled; /* must be set */
+
+ int id; /* must be set */
+ enum sas_class class;
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_phy_type type;
+ enum sas_phy_role role;
+ enum sas_oob_mode oob_mode;
+ enum sas_linkrate linkrate;
+
+ u8 *sas_addr; /* must be set */
+ u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+ spinlock_t frame_rcvd_lock;
+ u8 *frame_rcvd; /* must be set */
+ int frame_rcvd_size;
+
+ spinlock_t sas_prim_lock;
+ u32 sas_prim;
+
+ struct list_head port_phy_el; /* driver:RO */
+ struct asd_sas_port *port; /* Class:RW, driver: RO */
+
+ struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+ void *lldd_phy; /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+ struct Scsi_Host *shost;
+
+ spinlock_t task_queue_lock;
+ struct list_head task_queue;
+ int task_queue_size;
+
+ struct semaphore queue_thread_sema;
+ int queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+ spinlock_t event_lock;
+ struct work_struct ha_events[HA_NUM_EVENTS];
+ unsigned long pending;
+
+ struct scsi_core core;
+
+/* public: */
+ char *sas_ha_name;
+ struct pci_dev *pcidev; /* should be set */
+ struct module *lldd_module; /* should be set */
+
+ u8 *sas_addr; /* must be set */
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ spinlock_t phy_port_lock;
+ struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */
+ struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+ int num_phys; /* must be set, gt 0, static */
+
+ /* The class calls this to send a task for execution. */
+ int lldd_max_execute_num;
+ int lldd_queue_size;
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+ void *lldd_ha; /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+ return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+ return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+ return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+ phy->oob_mode = OOB_NOT_CONNECTED;
+ phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+}
+
+/* ---------- Tasks ---------- */
+/*
+ service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
+ exec_status | | |
+ ---------------------+---------------------+-----------------------+
+ SAM_... | X | |
+ DEV_NO_RESPONSE | X | X |
+ INTERRUPTED | X | |
+ QUEUE_FULL | | X |
+ DEVICE_UNKNOWN | | X |
+ SG_ERR | | X |
+ ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+ SAS_TASK_COMPLETE,
+ SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+ SAM_GOOD = 0,
+ SAM_CHECK_COND = 2,
+ SAM_COND_MET = 4,
+ SAM_BUSY = 8,
+ SAM_INTERMEDIATE = 0x10,
+ SAM_IM_COND_MET = 0x12,
+ SAM_RESV_CONFLICT= 0x14,
+ SAM_TASK_SET_FULL= 0x28,
+ SAM_ACA_ACTIVE = 0x30,
+ SAM_TASK_ABORTED = 0x40,
+
+ SAS_DEV_NO_RESPONSE = 0x80,
+ SAS_DATA_UNDERRUN,
+ SAS_DATA_OVERRUN,
+ SAS_INTERRUPTED,
+ SAS_QUEUE_FULL,
+ SAS_DEVICE_UNKNOWN,
+ SAS_SG_ERR,
+ SAS_OPEN_REJECT,
+ SAS_OPEN_TO,
+ SAS_PROTO_RESPONSE,
+ SAS_PHY_DOWN,
+ SAS_NAK_R_ERR,
+ SAS_PENDING,
+ SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * - For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * - For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set. If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+ u16 frame_len;
+ u8 ending_fis[24]; /* dev to host or data-in */
+ u32 sstatus;
+ u32 serror;
+ u32 scontrol;
+ u32 sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+ enum service_response resp;
+ enum exec_status stat;
+ int buf_valid_size;
+
+ u8 buf[SAS_STATUS_BUF_SIZE];
+
+ u32 residual;
+ enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+ struct host_to_dev_fis fis;
+ u8 atapi_packet[16]; /* 0 if not ATAPI task */
+
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 dma_xfer:1; /* PIO:0 or DMA:1 */
+ u8 use_ncq:1;
+ u8 set_affil_pol:1;
+ u8 stp_affil_pol:1;
+
+ u8 device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+ struct scatterlist smp_req;
+ struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+ TASK_ATTR_SIMPLE = 0,
+ TASK_ATTR_HOQ = 1,
+ TASK_ATTR_ORDERED= 2,
+ TASK_ATTR_ACA = 4,
+};
+
+struct sas_ssp_task {
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 LUN[8];
+ u8 enable_first_burst:1;
+ enum task_attribute task_attr;
+ u8 task_prio;
+ u8 cdb[16];
+};
+
+struct sas_task {
+ struct domain_device *dev;
+ struct list_head list;
+
+ spinlock_t task_state_lock;
+ unsigned task_state_flags;
+
+ enum sas_proto task_proto;
+
+ /* Used by the discovery code. */
+ struct timer_list timer;
+ struct completion completion;
+
+ union {
+ struct sas_ata_task ata_task;
+ struct sas_smp_task smp_task;
+ struct sas_ssp_task ssp_task;
+ };
+
+ struct scatterlist *scatter;
+ int num_scatter;
+ u32 total_xfer_len;
+ u8 data_dir:2; /* Use PCI_DMA_... */
+
+ struct task_status_struct task_status;
+ void (*task_done)(struct sas_task *);
+
+ void *lldd_task; /* for use by LLDDs */
+ void *uldd_task;
+};
+
+
+
+#define SAS_TASK_STATE_PENDING 1
+#define SAS_TASK_STATE_DONE 2
+#define SAS_TASK_STATE_ABORTED 4
+
+static inline struct sas_task *sas_alloc_task(unsigned long flags)
+{
+ extern kmem_cache_t *sas_task_cache;
+ struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+ if (task) {
+ memset(task, 0, sizeof(*task));
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+
+ return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ extern kmem_cache_t *sas_task_cache;
+ BUG_ON(!list_empty(&task->list));
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+
+struct sas_domain_function_template {
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct asd_sas_phy *);
+ void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+ /* The class calls these when a device is found or gone. */
+ int (*lldd_dev_found)(struct domain_device *);
+ void (*lldd_dev_gone)(struct domain_device *);
+
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ unsigned long gfp_flags);
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+extern int sas_queuecommand(struct scsi_cmnd *,
+ void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_slave_configure(struct scsi_device *);
+extern void sas_slave_destroy(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+ struct block_device *,
+ sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int sas_discover_sata(struct domain_device *);
+int sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 0000000..2f4b6af
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,631 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE 8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST 0x40
+#define SMP_RESPONSE 0x41
+
+#define SSP_DATA 0x01
+#define SSP_XFER_RDY 0x05
+#define SSP_COMMAND 0x06
+#define SSP_RESPONSE 0x07
+#define SSP_TASK 0x16
+
+#define SMP_REPORT_GENERAL 0x00
+#define SMP_REPORT_MANUF_INFO 0x01
+#define SMP_READ_GPIO_REG 0x02
+#define SMP_DISCOVER 0x10
+#define SMP_REPORT_PHY_ERR_LOG 0x11
+#define SMP_REPORT_PHY_SATA 0x12
+#define SMP_REPORT_ROUTE_INFO 0x13
+#define SMP_WRITE_GPIO_REG 0x82
+#define SMP_CONF_ROUTE_INFO 0x90
+#define SMP_PHY_CONTROL 0x91
+#define SMP_PHY_TEST_FUNCTION 0x92
+
+#define SMP_RESP_FUNC_ACC 0x00
+#define SMP_RESP_FUNC_UNK 0x01
+#define SMP_RESP_FUNC_FAILED 0x02
+#define SMP_RESP_INV_FRM_LEN 0x03
+#define SMP_RESP_NO_PHY 0x10
+#define SMP_RESP_NO_INDEX 0x11
+#define SMP_RESP_PHY_NO_SATA 0x12
+#define SMP_RESP_PHY_UNK_OP 0x13
+#define SMP_RESP_PHY_UNK_TESTF 0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT 0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK 0x01
+#define TMF_ABORT_TASK_SET 0x02
+#define TMF_CLEAR_TASK_SET 0x04
+#define TMF_LU_RESET 0x08
+#define TMF_CLEAR_ACA 0x40
+#define TMF_QUERY_TASK 0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE 0x00
+#define TMF_RESP_INVALID_FRAME 0x02
+#define TMF_RESP_FUNC_ESUPP 0x04
+#define TMF_RESP_FUNC_FAILED 0x05
+#define TMF_RESP_FUNC_SUCC 0x08
+#define TMF_RESP_NO_LUN 0x09
+#define TMF_RESP_OVERLAPPED_TAG 0x0A
+
+enum sas_oob_mode {
+ OOB_NOT_CONNECTED,
+ SATA_OOB_MODE,
+ SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+ NO_DEVICE = 0, /* protocol */
+ SAS_END_DEV = 1, /* protocol */
+ EDGE_DEV = 2, /* protocol */
+ FANOUT_DEV = 3, /* protocol */
+ SAS_HA = 4,
+ SATA_DEV = 5,
+ SATA_PM = 7,
+ SATA_PM_PORT= 8,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+ SATA_PROTO = 1,
+ SAS_PROTO_SMP = 2, /* protocol */
+ SAS_PROTO_STP = 4, /* protocol */
+ SAS_PROTO_SSP = 8, /* protocol */
+ SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+ PHY_FUNC_NOP,
+ PHY_FUNC_LINK_RESET, /* Enables the phy */
+ PHY_FUNC_HARD_RESET,
+ PHY_FUNC_DISABLE,
+ PHY_FUNC_CLEAR_ERROR_LOG = 5,
+ PHY_FUNC_CLEAR_AFFIL,
+ PHY_FUNC_TX_SATA_PS_SIGNAL,
+ PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+ PHY_FUNC_SET_LINK_RATE,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+ SAS_PRIM_AIP_NORMAL = 1,
+ SAS_PRIM_AIP_R0 = 2,
+ SAS_PRIM_AIP_R1 = 3,
+ SAS_PRIM_AIP_R2 = 4,
+ SAS_PRIM_AIP_WC = 5,
+ SAS_PRIM_AIP_WD = 6,
+ SAS_PRIM_AIP_WP = 7,
+ SAS_PRIM_AIP_RWP = 8,
+
+ SAS_PRIM_BC_CH = 9,
+ SAS_PRIM_BC_RCH0 = 10,
+ SAS_PRIM_BC_RCH1 = 11,
+ SAS_PRIM_BC_R0 = 12,
+ SAS_PRIM_BC_R1 = 13,
+ SAS_PRIM_BC_R2 = 14,
+ SAS_PRIM_BC_R3 = 15,
+ SAS_PRIM_BC_R4 = 16,
+
+ SAS_PRIM_NOTIFY_ENSP= 17,
+ SAS_PRIM_NOTIFY_R0 = 18,
+ SAS_PRIM_NOTIFY_R1 = 19,
+ SAS_PRIM_NOTIFY_R2 = 20,
+
+ SAS_PRIM_CLOSE_CLAF = 21,
+ SAS_PRIM_CLOSE_NORM = 22,
+ SAS_PRIM_CLOSE_R0 = 23,
+ SAS_PRIM_CLOSE_R1 = 24,
+
+ SAS_PRIM_OPEN_RTRY = 25,
+ SAS_PRIM_OPEN_RJCT = 26,
+ SAS_PRIM_OPEN_ACPT = 27,
+
+ SAS_PRIM_DONE = 28,
+ SAS_PRIM_BREAK = 29,
+
+ SATA_PRIM_DMAT = 33,
+ SATA_PRIM_PMNAK = 34,
+ SATA_PRIM_PMACK = 35,
+ SATA_PRIM_PMREQ_S = 36,
+ SATA_PRIM_PMREQ_P = 37,
+ SATA_SATA_R_ERR = 38,
+};
+
+enum sas_open_rej_reason {
+ /* Abandon open */
+ SAS_OREJ_UNKNOWN = 0,
+ SAS_OREJ_BAD_DEST = 1,
+ SAS_OREJ_CONN_RATE = 2,
+ SAS_OREJ_EPROTO = 3,
+ SAS_OREJ_RESV_AB0 = 4,
+ SAS_OREJ_RESV_AB1 = 5,
+ SAS_OREJ_RESV_AB2 = 6,
+ SAS_OREJ_RESV_AB3 = 7,
+ SAS_OREJ_WRONG_DEST= 8,
+ SAS_OREJ_STP_NORES = 9,
+
+ /* Retry open */
+ SAS_OREJ_NO_DEST = 10,
+ SAS_OREJ_PATH_BLOCKED = 11,
+ SAS_OREJ_RSVD_CONT0 = 12,
+ SAS_OREJ_RSVD_CONT1 = 13,
+ SAS_OREJ_RSVD_INIT0 = 14,
+ SAS_OREJ_RSVD_INIT1 = 15,
+ SAS_OREJ_RSVD_STOP0 = 16,
+ SAS_OREJ_RSVD_STOP1 = 17,
+ SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct dev_to_host_fis {
+ u8 fis_type; /* 0x34 */
+ u8 flags;
+ u8 status;
+ u8 error;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 _r_c;
+
+ u32 _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+ u8 fis_type; /* 0x27 */
+ u8 flags;
+ u8 command;
+ u8 features;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 features_exp;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_a;
+ u8 control;
+
+ u32 _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 changing_data_ptr:1;
+ u8 retransmit:1;
+ u8 retry_data_frames:1;
+ u8 _r_c:5;
+
+ u8 num_fill_bytes:2;
+ u8 _r_d:6;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 datapres:2;
+ u8 _r_b:6;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 conf_route_table:1;
+ u8 configuring:1;
+ u8 _r_b:6;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_c:4;
+ u8 attached_dev_type:3;
+ u8 _r_d:1;
+
+ u8 linkrate:4;
+ u8 _r_e:4;
+
+ u8 attached_sata_host:1;
+ u8 iproto:3;
+ u8 _r_f:4;
+
+ u8 attached_sata_dev:1;
+ u8 tproto:3;
+ u8 _r_g:3;
+ u8 attached_sata_ps:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 hmin_linkrate:4;
+ u8 pmin_linkrate:4;
+ u8 hmax_linkrate:4;
+ u8 pmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 pptv:4;
+ u8 _r_i:3;
+ u8 virtual:1;
+
+ u8 routing_attr:4;
+ u8 _r_j:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 affil_valid:1;
+ u8 affil_supp:1;
+ u8 _r_c:6;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 _r_c:5;
+ u8 retry_data_frames:1;
+ u8 retransmit:1;
+ u8 changing_data_ptr:1;
+
+ u8 _r_d:6;
+ u8 num_fill_bytes:2;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 _r_b:6;
+ u8 datapres:2;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 _r_b:6;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_d:1;
+ u8 attached_dev_type:3;
+ u8 _r_c:4;
+
+ u8 _r_e:4;
+ u8 linkrate:4;
+
+ u8 _r_f:4;
+ u8 iproto:3;
+ u8 attached_sata_host:1;
+
+ u8 attached_sata_ps:1;
+ u8 _r_g:3;
+ u8 tproto:3;
+ u8 attached_sata_dev:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 pmin_linkrate:4;
+ u8 hmin_linkrate:4;
+ u8 pmax_linkrate:4;
+ u8 hmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 virtual:1;
+ u8 _r_i:3;
+ u8 pptv:4;
+
+ u8 _r_j:4;
+ u8 routing_attr:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 _r_c:6;
+ u8 affil_supp:1;
+ u8 affil_valid:1;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index c60b8ff..84a6d5f 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -25,13 +25,6 @@
#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
/*
- * SCSI device types
- */
-
-#define MAX_SCSI_DEVICE_CODE 15
-extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
-
-/*
* Special value for scanning to specify scanning or rescanning of all
* possible channels, (target) ids, or luns on a given shost.
*/
@@ -225,6 +218,9 @@
#define TYPE_RBC 0x0e
#define TYPE_NO_LUN 0x7f
+/* Returns a human-readable name for the device */
+extern const char * scsi_device_type(unsigned type);
+
/*
* standard mode-select header prepended to all mode-select commands
*/
@@ -433,4 +429,10 @@
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline u32 scsi_to_u32(u8 *ptr)
+{
+ return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
#endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 58e6444..be117f8 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -118,20 +118,6 @@
unsigned long pid; /* Process ID, starts at 0. Unique per host. */
};
-/*
- * These are the values that scsi_cmd->state can take.
- */
-#define SCSI_STATE_TIMEOUT 0x1000
-#define SCSI_STATE_FINISHED 0x1001
-#define SCSI_STATE_FAILED 0x1002
-#define SCSI_STATE_QUEUED 0x1003
-#define SCSI_STATE_UNUSED 0x1006
-#define SCSI_STATE_DISCONNECTING 0x1008
-#define SCSI_STATE_INITIALIZING 0x1009
-#define SCSI_STATE_BHQUEUE 0x100a
-#define SCSI_STATE_MLQUEUE 0x100b
-
-
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index b3dd90f..39c6f8c 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -16,6 +16,7 @@
struct Scsi_Host;
struct scsi_host_cmd_pool;
struct scsi_transport_template;
+struct blk_queue_tags;
/*
@@ -466,6 +467,12 @@
struct scsi_transport_template *transportt;
/*
+ * area to keep a shared tag map (if needed, will be
+ * NULL if not)
+ */
+ struct blk_queue_tag *bqt;
+
+ /*
* The following two fields are protected with host_lock;
* however, eh routines can safely access during eh processing
* without acquiring the lock.
diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
new file mode 100644
index 0000000..8c1470c
--- /dev/null
+++ b/include/scsi/scsi_netlink.h
@@ -0,0 +1,87 @@
+/*
+ * SCSI Transport Netlink Interface
+ * Used for the posting of outbound SCSI transport events
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_H
+#define SCSI_NETLINK_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/* Single Netlink Message type to send all SCSI Transport messages */
+#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1
+
+/* SCSI Transport Broadcast Groups */
+ /* leaving groups 0 and 1 unassigned */
+#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */
+#define SCSI_NL_GRP_CNT 3
+
+
+/* SCSI_TRANSPORT_MSG event message header */
+struct scsi_nl_hdr {
+ uint8_t version;
+ uint8_t transport;
+ uint16_t magic;
+ uint16_t msgtype;
+ uint16_t msglen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+/* scsi_nl_hdr->version value */
+#define SCSI_NL_VERSION 1
+
+/* scsi_nl_hdr->magic value */
+#define SCSI_NL_MAGIC 0xA1B2
+
+/* scsi_nl_hdr->transport value */
+#define SCSI_NL_TRANSPORT 0
+#define SCSI_NL_TRANSPORT_FC 1
+#define SCSI_NL_MAX_TRANSPORTS 2
+
+/* scsi_nl_hdr->msgtype values are defined in each transport */
+
+
+/*
+ * Vendor ID:
+ * If transports post vendor-unique events, they must pass a well-known
+ * 32-bit vendor identifier. This identifier consists of 8 bits indicating
+ * the "type" of identifier contained, and 24 bits of id data.
+ *
+ * Identifiers for each type:
+ * PCI : ID data is the 16 bit PCI Registered Vendor ID
+ */
+#define SCSI_NL_VID_TYPE_SHIFT 56
+#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+
+
+#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \
+ { \
+ (hdr)->version = SCSI_NL_VERSION; \
+ (hdr)->transport = t; \
+ (hdr)->magic = SCSI_NL_MAGIC; \
+ (hdr)->msgtype = mtype; \
+ (hdr)->msglen = mlen; \
+ }
+
+
+#endif /* SCSI_NETLINK_H */
+
diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h
new file mode 100644
index 0000000..cbf76e4
--- /dev/null
+++ b/include/scsi/scsi_netlink_fc.h
@@ -0,0 +1,71 @@
+/*
+ * FC Transport Netlink Interface
+ *
+ * Copyright (C) 2006 James Smart, Emulex Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef SCSI_NETLINK_FC_H
+#define SCSI_NETLINK_FC_H
+
+#include <scsi/scsi_netlink.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport Message Types
+ */
+ /* kernel -> user */
+#define FC_NL_ASYNC_EVENT 0x0100
+ /* user -> kernel */
+/* none */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7)
+
+
+/*
+ * FC Transport Broadcast Event Message :
+ * FC_NL_ASYNC_EVENT
+ *
+ * Note: if Vendor Unique message, &event_data will be start of
+ * vendor unique payload, and the length of the payload is
+ * per event_datalen
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ * formatting requirements specified in scsi_netlink.h
+ */
+struct fc_nl_event {
+ struct scsi_nl_hdr snlh; /* must be 1st element ! */
+ uint64_t seconds;
+ uint64_t vendor_id;
+ uint16_t host_no;
+ uint16_t event_datalen;
+ uint32_t event_num;
+ uint32_t event_code;
+ uint32_t event_data;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+#endif /* SCSI_NETLINK_FC_H */
+
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
index e47e36a..d04d05a 100644
--- a/include/scsi/scsi_tcq.h
+++ b/include/scsi/scsi_tcq.h
@@ -4,6 +4,7 @@
#include <linux/blkdev.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
#define MSG_SIMPLE_TAG 0x20
@@ -66,7 +67,8 @@
return;
if (!blk_queue_tagged(sdev->request_queue))
- blk_queue_init_tags(sdev->request_queue, depth, NULL);
+ blk_queue_init_tags(sdev->request_queue, depth,
+ sdev->host->bqt);
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
}
@@ -131,4 +133,15 @@
return sdev->current_cmnd;
}
+/**
+ * scsi_init_shared_tag_map - create a shared tag map
+ * @shost: the host to share the tag map among all devices
+ * @depth: the total depth of the map
+ */
+static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
+{
+ shost->bqt = blk_init_tags(depth);
+ return shost->bqt ? 0 : -ENOMEM;
+}
+
#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 6d28b03..fd35232 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -29,6 +29,7 @@
#include <linux/sched.h>
#include <scsi/scsi.h>
+#include <scsi/scsi_netlink.h>
struct scsi_transport_template;
@@ -194,6 +195,7 @@
u32 roles;
enum fc_port_state port_state; /* Will only be ONLINE or UNKNOWN */
u32 scsi_target_id;
+ u32 fast_io_fail_tmo;
/* exported data */
void *dd_data; /* Used for driver-specific storage */
@@ -206,6 +208,7 @@
struct device dev;
struct work_struct dev_loss_work;
struct work_struct scan_work;
+ struct work_struct fail_io_work;
struct work_struct stgt_delete_work;
struct work_struct rport_delete_work;
} __attribute__((aligned(sizeof(unsigned long))));
@@ -284,6 +287,30 @@
/*
+ * FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
+ */
+
+/*
+ * fc_host_event_code: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_host_event_code {
+ FCH_EVT_LIP = 0x1,
+ FCH_EVT_LINKUP = 0x2,
+ FCH_EVT_LINKDOWN = 0x3,
+ FCH_EVT_LIPRESET = 0x4,
+ FCH_EVT_RSCN = 0x5,
+ FCH_EVT_ADAPTER_CHANGE = 0x103,
+ FCH_EVT_PORT_UNKNOWN = 0x200,
+ FCH_EVT_PORT_OFFLINE = 0x201,
+ FCH_EVT_PORT_ONLINE = 0x202,
+ FCH_EVT_PORT_FABRIC = 0x204,
+ FCH_EVT_LINK_UNKNOWN = 0x500,
+ FCH_EVT_VENDOR_UNIQUE = 0xffff,
+};
+
+
+/*
* FC Local Port (Host) Attributes
*
* Attributes are based on HBAAPI V2.0 definitions.
@@ -312,7 +339,6 @@
u64 permanent_port_name;
u32 supported_classes;
u8 supported_fc4s[FC_FC4_LIST_SIZE];
- char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
u32 supported_speeds;
u32 maxframe_size;
char serial_number[FC_SERIAL_NUMBER_SIZE];
@@ -324,6 +350,8 @@
u8 active_fc4s[FC_FC4_LIST_SIZE];
u32 speed;
u64 fabric_name;
+ char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+ char system_hostname[FC_SYMBOLIC_NAME_SIZE];
/* Private (Transport-managed) Attributes */
enum fc_tgtid_binding_type tgtid_bind_type;
@@ -354,8 +382,6 @@
(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
#define fc_host_supported_fc4s(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
-#define fc_host_symbolic_name(x) \
- (((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
#define fc_host_supported_speeds(x) \
(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
#define fc_host_maxframe_size(x) \
@@ -374,6 +400,10 @@
(((struct fc_host_attrs *)(x)->shost_data)->speed)
#define fc_host_fabric_name(x) \
(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_symbolic_name(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_system_hostname(x) \
+ (((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
#define fc_host_tgtid_bind_type(x) \
(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
#define fc_host_rports(x) \
@@ -409,12 +439,17 @@
void (*get_host_active_fc4s)(struct Scsi_Host *);
void (*get_host_speed)(struct Scsi_Host *);
void (*get_host_fabric_name)(struct Scsi_Host *);
+ void (*get_host_symbolic_name)(struct Scsi_Host *);
+ void (*set_host_system_hostname)(struct Scsi_Host *);
struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
void (*reset_fc_host_stats)(struct Scsi_Host *);
int (*issue_fc_host_lip)(struct Scsi_Host *);
+ void (*dev_loss_tmo_callbk)(struct fc_rport *);
+ void (*terminate_rport_io)(struct fc_rport *);
+
/* allocation lengths for host-specific data */
u32 dd_fcrport_size;
@@ -445,7 +480,6 @@
unsigned long show_host_permanent_port_name:1;
unsigned long show_host_supported_classes:1;
unsigned long show_host_supported_fc4s:1;
- unsigned long show_host_symbolic_name:1;
unsigned long show_host_supported_speeds:1;
unsigned long show_host_maxframe_size:1;
unsigned long show_host_serial_number:1;
@@ -456,6 +490,8 @@
unsigned long show_host_active_fc4s:1;
unsigned long show_host_speed:1;
unsigned long show_host_fabric_name:1;
+ unsigned long show_host_symbolic_name:1;
+ unsigned long show_host_system_hostname:1;
};
@@ -491,6 +527,25 @@
return result;
}
+static inline u64 wwn_to_u64(u8 *wwn)
+{
+ return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
+ (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
+ (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
+ (u64)wwn[6] << 8 | (u64)wwn[7];
+}
+
+static inline void u64_to_wwn(u64 inm, u8 *wwn)
+{
+ wwn[0] = (inm >> 56) & 0xff;
+ wwn[1] = (inm >> 48) & 0xff;
+ wwn[2] = (inm >> 40) & 0xff;
+ wwn[3] = (inm >> 32) & 0xff;
+ wwn[4] = (inm >> 24) & 0xff;
+ wwn[5] = (inm >> 16) & 0xff;
+ wwn[6] = (inm >> 8) & 0xff;
+ wwn[7] = inm & 0xff;
+}
struct scsi_transport_template *fc_attach_transport(
struct fc_function_template *);
@@ -501,13 +556,14 @@
void fc_remote_port_delete(struct fc_rport *rport);
void fc_remote_port_rolechg(struct fc_rport *rport, u32 roles);
int scsi_is_fc_rport(const struct device *);
-
-static inline u64 wwn_to_u64(u8 *wwn)
-{
- return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
- (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
- (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
- (u64)wwn[6] << 8 | (u64)wwn[7];
-}
+u32 fc_get_event_number(void);
+void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+ enum fc_host_event_code event_code, u32 event_data);
+void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+ u32 data_len, char * data_buf, u64 vendor_id);
+ /* Note: when specifying vendor_id to fc_host_post_vendor_event()
+ * be sure to read the Vendor Type and ID formatting requirements
+ * specified in scsi_netlink.h
+ */
#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 6cc2314..5302437 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -24,15 +24,23 @@
};
enum sas_linkrate {
- SAS_LINK_RATE_UNKNOWN,
- SAS_PHY_DISABLED,
- SAS_LINK_RATE_FAILED,
- SAS_SATA_SPINUP_HOLD,
- SAS_SATA_PORT_SELECTOR,
- SAS_LINK_RATE_1_5_GBPS,
- SAS_LINK_RATE_3_0_GBPS,
- SAS_LINK_RATE_6_0_GBPS,
- SAS_LINK_VIRTUAL,
+ /* These Values are defined in the SAS standard */
+ SAS_LINK_RATE_UNKNOWN = 0,
+ SAS_PHY_DISABLED = 1,
+ SAS_PHY_RESET_PROBLEM = 2,
+ SAS_SATA_SPINUP_HOLD = 3,
+ SAS_SATA_PORT_SELECTOR = 4,
+ SAS_PHY_RESET_IN_PROGRESS = 5,
+ SAS_LINK_RATE_1_5_GBPS = 8,
+ SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+ SAS_LINK_RATE_3_0_GBPS = 9,
+ SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+ SAS_LINK_RATE_6_0_GBPS = 10,
+ /* These are virtual to the transport class and may never
+ * be signalled normally since the standard defined field
+ * is only 4 bits */
+ SAS_LINK_RATE_FAILED = 0x10,
+ SAS_PHY_VIRTUAL = 0x11,
};
struct sas_identify {
@@ -57,9 +65,6 @@
enum sas_linkrate maximum_linkrate_hw;
enum sas_linkrate maximum_linkrate;
- /* internal state */
- unsigned int local_attached : 1;
-
/* link error statistics */
u32 invalid_dword_count;
u32 running_disparity_error_count;
@@ -145,12 +150,18 @@
#define transport_class_to_sas_port(cdev) \
dev_to_sas_port((cdev)->dev)
+struct sas_phy_linkrates {
+ enum sas_linkrate maximum_linkrate;
+ enum sas_linkrate minimum_linkrate;
+};
+
/* The functions by which the transport class and the driver communicate */
struct sas_function_template {
int (*get_linkerrors)(struct sas_phy *);
int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
int (*get_bay_identifier)(struct sas_rphy *);
int (*phy_reset)(struct sas_phy *, int);
+ int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
};
@@ -196,4 +207,6 @@
rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
}
+#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
+
#endif /* SCSI_TRANSPORT_SAS_H */
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
index 302680c..da180f7 100644
--- a/include/scsi/scsi_transport_spi.h
+++ b/include/scsi/scsi_transport_spi.h
@@ -53,7 +53,8 @@
unsigned int support_ius; /* support Information Units */
unsigned int support_qas; /* supports quick arbitration and selection */
/* Private Fields */
- unsigned int dv_pending:1; /* Internal flag */
+ unsigned int dv_pending:1; /* Internal flag: DV Requested */
+ unsigned int dv_in_progress:1; /* Internal: DV started */
struct mutex dv_mutex; /* semaphore to serialise dv */
};