mfd/rtc/gpio: twl: No need to allocate bigger buffer for write
Since the twl-core has been converted to use regmap it is no longer needed
to allocate bigger buffer for data when writing to twl.
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c5f8ca2..88829c3 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -354,13 +354,13 @@
static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
{
- u8 message[6];
+ u8 message[5];
unsigned i, gpio_bit;
/* For most pins, a pulldown was enabled by default.
* We should have data that's specific to this board.
*/
- for (gpio_bit = 1, i = 1; i < 6; i++) {
+ for (gpio_bit = 1, i = 0; i < 5; i++) {
u8 bit_mask;
unsigned j;
@@ -379,16 +379,16 @@
static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
{
- u8 message[4];
+ u8 message[3];
/* 30 msec of debouncing is always used for MMC card detect,
* and is optional for everything else.
*/
- message[1] = (debounce & 0xff) | (mmc_cd & 0x03);
+ message[0] = (debounce & 0xff) | (mmc_cd & 0x03);
debounce >>= 8;
- message[2] = (debounce & 0xff);
+ message[1] = (debounce & 0xff);
debounce >>= 8;
- message[3] = (debounce & 0x03);
+ message[2] = (debounce & 0x03);
return twl_i2c_write(TWL4030_MODULE_GPIO, message,
REG_GPIO_DEBEN1, 3);