phy: add the Berlin USB PHY driver
Add the driver driving the Marvell Berlin USB PHY. This allows to
initialize the PHY and to use it from the USB driver later.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c
new file mode 100644
index 0000000..f9f1306
--- /dev/null
+++ b/drivers/phy/phy-berlin-usb.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ * Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#define USB_PHY_PLL 0x04
+#define USB_PHY_PLL_CONTROL 0x08
+#define USB_PHY_TX_CTRL0 0x10
+#define USB_PHY_TX_CTRL1 0x14
+#define USB_PHY_TX_CTRL2 0x18
+#define USB_PHY_RX_CTRL 0x20
+#define USB_PHY_ANALOG 0x34
+
+/* USB_PHY_PLL */
+#define CLK_REF_DIV(x) ((x) << 4)
+#define FEEDBACK_CLK_DIV(x) ((x) << 8)
+
+/* USB_PHY_PLL_CONTROL */
+#define CLK_STABLE BIT(0)
+#define PLL_CTRL_PIN BIT(1)
+#define PLL_CTRL_REG BIT(2)
+#define PLL_ON BIT(3)
+#define PHASE_OFF_TOL_125 (0x0 << 5)
+#define PHASE_OFF_TOL_250 BIT(5)
+#define KVC0_CALIB (0x0 << 9)
+#define KVC0_REG_CTRL BIT(9)
+#define KVC0_HIGH (0x0 << 10)
+#define KVC0_LOW (0x3 << 10)
+#define CLK_BLK_EN BIT(13)
+
+/* USB_PHY_TX_CTRL0 */
+#define EXT_HS_RCAL_EN BIT(3)
+#define EXT_FS_RCAL_EN BIT(4)
+#define IMPCAL_VTH_DIV(x) ((x) << 5)
+#define EXT_RS_RCAL_DIV(x) ((x) << 8)
+#define EXT_FS_RCAL_DIV(x) ((x) << 12)
+
+/* USB_PHY_TX_CTRL1 */
+#define TX_VDD15_14 (0x0 << 4)
+#define TX_VDD15_15 BIT(4)
+#define TX_VDD15_16 (0x2 << 4)
+#define TX_VDD15_17 (0x3 << 4)
+#define TX_VDD12_VDD (0x0 << 6)
+#define TX_VDD12_11 BIT(6)
+#define TX_VDD12_12 (0x2 << 6)
+#define TX_VDD12_13 (0x3 << 6)
+#define LOW_VDD_EN BIT(8)
+#define TX_OUT_AMP(x) ((x) << 9)
+
+/* USB_PHY_TX_CTRL2 */
+#define TX_CHAN_CTRL_REG(x) ((x) << 0)
+#define DRV_SLEWRATE(x) ((x) << 4)
+#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
+#define IMP_CAL_FS_HS_DLY_1 BIT(6)
+#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
+#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
+#define FS_DRV_EN_MASK(x) ((x) << 8)
+#define HS_DRV_EN_MASK(x) ((x) << 12)
+
+/* USB_PHY_RX_CTRL */
+#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
+#define PHASE_FREEZE_DLY_4_CL BIT(0)
+#define ACK_LENGTH_8_CL (0x0 << 2)
+#define ACK_LENGTH_12_CL BIT(2)
+#define ACK_LENGTH_16_CL (0x2 << 2)
+#define ACK_LENGTH_20_CL (0x3 << 2)
+#define SQ_LENGTH_3 (0x0 << 4)
+#define SQ_LENGTH_6 BIT(4)
+#define SQ_LENGTH_9 (0x2 << 4)
+#define SQ_LENGTH_12 (0x3 << 4)
+#define DISCON_THRESHOLD_260 (0x0 << 6)
+#define DISCON_THRESHOLD_270 BIT(6)
+#define DISCON_THRESHOLD_280 (0x2 << 6)
+#define DISCON_THRESHOLD_290 (0x3 << 6)
+#define SQ_THRESHOLD(x) ((x) << 8)
+#define LPF_COEF(x) ((x) << 12)
+#define INTPL_CUR_10 (0x0 << 14)
+#define INTPL_CUR_20 BIT(14)
+#define INTPL_CUR_30 (0x2 << 14)
+#define INTPL_CUR_40 (0x3 << 14)
+
+/* USB_PHY_ANALOG */
+#define ANA_PWR_UP BIT(1)
+#define ANA_PWR_DOWN BIT(2)
+#define V2I_VCO_RATIO(x) ((x) << 7)
+#define R_ROTATE_90 (0x0 << 10)
+#define R_ROTATE_0 BIT(10)
+#define MODE_TEST_EN BIT(11)
+#define ANA_TEST_DC_CTRL(x) ((x) << 12)
+
+#define to_phy_berlin_usb_priv(p) \
+ container_of((p), struct phy_berlin_usb_priv, phy)
+
+static const u32 phy_berlin_pll_dividers[] = {
+ /* Berlin 2 */
+ CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
+ /* Berlin 2CD */
+ CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
+};
+
+struct phy_berlin_usb_priv {
+ void __iomem *base;
+ struct phy *phy;
+ struct reset_control *rst_ctrl;
+ u32 pll_divider;
+};
+
+static int phy_berlin_usb_power_on(struct phy *phy)
+{
+ struct phy_berlin_usb_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ reset_control_reset(priv->rst_ctrl);
+
+ writel(priv->pll_divider,
+ priv->base + USB_PHY_PLL);
+ writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
+ CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
+ writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
+ priv->base + USB_PHY_ANALOG);
+ writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
+ DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
+ INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
+
+ writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
+ writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
+ priv->base + USB_PHY_TX_CTRL0);
+
+ writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
+ EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
+
+ writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
+ priv->base + USB_PHY_TX_CTRL0);
+ writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
+ FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
+
+ return 0;
+}
+
+static struct phy_ops phy_berlin_usb_ops = {
+ .power_on = phy_berlin_usb_power_on,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id phy_berlin_sata_of_match[] = {
+ {
+ .compatible = "marvell,berlin2-usb-phy",
+ .data = &phy_berlin_pll_dividers[0],
+ },
+ {
+ .compatible = "marvell,berlin2cd-usb-phy",
+ .data = &phy_berlin_pll_dividers[1],
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
+
+static int phy_berlin_usb_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match =
+ of_match_device(phy_berlin_sata_of_match, &pdev->dev);
+ struct phy_berlin_usb_priv *priv;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->rst_ctrl))
+ return PTR_ERR(priv->rst_ctrl);
+
+ priv->pll_divider = *((u32 *)match->data);
+
+ priv->phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops,
+ NULL);
+ if (IS_ERR(priv->phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ phy_provider =
+ devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static struct platform_driver phy_berlin_usb_driver = {
+ .probe = phy_berlin_usb_probe,
+ .driver = {
+ .name = "phy-berlin-usb",
+ .owner = THIS_MODULE,
+ .of_match_table = phy_berlin_sata_of_match,
+ },
+};
+module_platform_driver(phy_berlin_usb_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
+MODULE_LICENSE("GPL");