Merge branch 'r8152-fixes'
Hayes Wang says:
====================
r8152: fix known issues
These patches fix some known issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3f9f6ed..4e257b8 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -31,7 +31,7 @@
#define NETNEXT_VERSION "08"
/* Information for net */
-#define NET_VERSION "3"
+#define NET_VERSION "4"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -116,6 +116,7 @@
#define USB_TX_DMA 0xd434
#define USB_TOLERANCE 0xd490
#define USB_LPM_CTRL 0xd41a
+#define USB_BMU_RESET 0xd4b0
#define USB_UPS_CTRL 0xd800
#define USB_MISC_0 0xd81a
#define USB_POWER_CUT 0xd80a
@@ -338,6 +339,10 @@
#define TEST_MODE_DISABLE 0x00000001
#define TX_SIZE_ADJUST1 0x00000100
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN 0x01
+#define BMU_RESET_EP_OUT 0x02
+
/* USB_UPS_CTRL */
#define POWER_CUT 0x0100
@@ -2169,7 +2174,7 @@
static void r8153_set_rx_early_size(struct r8152 *tp)
{
u32 mtu = tp->netdev->mtu;
- u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;
+ u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8;
ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
}
@@ -2456,6 +2461,17 @@
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
}
+static void rtl_reset_bmu(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+ ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+ ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+}
+
static void r8152_aldps_en(struct r8152 *tp, bool enable)
{
if (enable) {
@@ -2681,6 +2697,7 @@
r8153_hw_phy_cfg(tp);
rtl8152_nic_reset(tp);
+ rtl_reset_bmu(tp);
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
ocp_data &= ~NOW_IS_OOB;
@@ -2742,6 +2759,7 @@
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
rtl_disable(tp);
+ rtl_reset_bmu(tp);
for (i = 0; i < 1000; i++) {
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
@@ -2803,6 +2821,7 @@
{
r8153_aldps_en(tp, false);
rtl_disable(tp);
+ rtl_reset_bmu(tp);
r8153_aldps_en(tp, true);
usb_enable_lpm(tp->udev);
}
@@ -3382,15 +3401,11 @@
r8153_power_cut_en(tp, false);
r8153_u1u2en(tp, true);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
- PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
- U1U2_SPDWN_EN | L1_SPDWN_EN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
- PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
- TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN |
- EEE_SPDWN_EN);
+ /* MAC clock speed down */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
r8153_enable_eee(tp);
r8153_aldps_en(tp, true);