powerpc: Fix "attempt to move .org backwards" error
Once again, we see
arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards
arch/powerpc/kernel/exceptions-64s.S:866: Error: attempt to move .org backwards
arch/powerpc/kernel/exceptions-64s.S:890: Error: attempt to move .org backwards
when compiling ppc:allmodconfig.
This time the problem has been caused by to commit 0869b6fd209bda
("powerpc/book3s: Add basic infrastructure to handle HMI in Linux"),
which adds functions hmi_exception_early and hmi_exception_after_realmode
into a critical (size-limited) code area, even though that does not appear
to be necessary.
Move those functions to a non-critical area of the file.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 6144d5a..050f79a 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -592,61 +592,6 @@
MASKABLE_EXCEPTION_HV_OOL(0xe62, hmi_exception)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62)
- .globl hmi_exception_early
-hmi_exception_early:
- EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60)
- mr r10,r1 /* Save r1 */
- ld r1,PACAEMERGSP(r13) /* Use emergency stack */
- subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
- std r9,_CCR(r1) /* save CR in stackframe */
- mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
- std r11,_NIP(r1) /* save HSRR0 in stackframe */
- mfspr r12,SPRN_HSRR1 /* Save SRR1 */
- std r12,_MSR(r1) /* save SRR1 in stackframe */
- std r10,0(r1) /* make stack chain pointer */
- std r0,GPR0(r1) /* save r0 in stackframe */
- std r10,GPR1(r1) /* save r1 in stackframe */
- EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
- EXCEPTION_PROLOG_COMMON_3(0xe60)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl hmi_exception_realmode
- /* Windup the stack. */
- /* Clear MSR_RI before setting SRR0 and SRR1. */
- li r0,MSR_RI
- mfmsr r9 /* get MSR value */
- andc r9,r9,r0
- mtmsrd r9,1 /* Clear MSR_RI */
- /* Move original HSRR0 and HSRR1 into the respective regs */
- ld r9,_MSR(r1)
- mtspr SPRN_HSRR1,r9
- ld r3,_NIP(r1)
- mtspr SPRN_HSRR0,r3
- ld r9,_CTR(r1)
- mtctr r9
- ld r9,_XER(r1)
- mtxer r9
- ld r9,_LINK(r1)
- mtlr r9
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
- REST_GPR(10, r1)
- ld r11,_CCR(r1)
- mtcr r11
- REST_GPR(11, r1)
- REST_2GPRS(12, r1)
- /* restore original r1. */
- ld r1,GPR1(r1)
-
- /*
- * Go to virtual mode and pull the HMI event information from
- * firmware.
- */
- .globl hmi_exception_after_realmode
-hmi_exception_after_realmode:
- SET_SCRATCH0(r13)
- EXCEPTION_PROLOG_0(PACA_EXGEN)
- b hmi_exception_hv
-
MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell)
KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82)
@@ -1306,6 +1251,61 @@
. = 0x8000
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
+ .globl hmi_exception_early
+hmi_exception_early:
+ EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60)
+ mr r10,r1 /* Save r1 */
+ ld r1,PACAEMERGSP(r13) /* Use emergency stack */
+ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
+ std r9,_CCR(r1) /* save CR in stackframe */
+ mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
+ std r11,_NIP(r1) /* save HSRR0 in stackframe */
+ mfspr r12,SPRN_HSRR1 /* Save SRR1 */
+ std r12,_MSR(r1) /* save SRR1 in stackframe */
+ std r10,0(r1) /* make stack chain pointer */
+ std r0,GPR0(r1) /* save r0 in stackframe */
+ std r10,GPR1(r1) /* save r1 in stackframe */
+ EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
+ EXCEPTION_PROLOG_COMMON_3(0xe60)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl hmi_exception_realmode
+ /* Windup the stack. */
+ /* Clear MSR_RI before setting SRR0 and SRR1. */
+ li r0,MSR_RI
+ mfmsr r9 /* get MSR value */
+ andc r9,r9,r0
+ mtmsrd r9,1 /* Clear MSR_RI */
+ /* Move original HSRR0 and HSRR1 into the respective regs */
+ ld r9,_MSR(r1)
+ mtspr SPRN_HSRR1,r9
+ ld r3,_NIP(r1)
+ mtspr SPRN_HSRR0,r3
+ ld r9,_CTR(r1)
+ mtctr r9
+ ld r9,_XER(r1)
+ mtxer r9
+ ld r9,_LINK(r1)
+ mtlr r9
+ REST_GPR(0, r1)
+ REST_8GPRS(2, r1)
+ REST_GPR(10, r1)
+ ld r11,_CCR(r1)
+ mtcr r11
+ REST_GPR(11, r1)
+ REST_2GPRS(12, r1)
+ /* restore original r1. */
+ ld r1,GPR1(r1)
+
+ /*
+ * Go to virtual mode and pull the HMI event information from
+ * firmware.
+ */
+ .globl hmi_exception_after_realmode
+hmi_exception_after_realmode:
+ SET_SCRATCH0(r13)
+ EXCEPTION_PROLOG_0(PACA_EXGEN)
+ b hmi_exception_hv
+
#ifdef CONFIG_PPC_POWERNV
_GLOBAL(opal_mc_secondary_handler)
HMT_MEDIUM_PPR_DISCARD