[SCSI] lpfc 8.3.5: Add AER support
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 12ab1ea..6192583 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -7098,6 +7099,7 @@
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
@@ -7132,6 +7134,53 @@
}
/**
+ * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot reset. It
+ * disables the device interrupt and pci device, and aborts the internal FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2710 PCI channel I/O frozen\n");
+ /* Disable interrupt and pci device */
+ lpfc_sli_disable_intr(phba);
+ pci_disable_device(phba->pcidev);
+ /*
+ * There may be I/Os dropped by the firmware.
+ * Error iocb (I/O) on txcmplq and let the SCSI layer
+ * retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot permanently
+ * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2711 PCI channel I/O permanent failure\n");
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+ /* Clean up all driver's outstanding SCSI I/Os */
+ lpfc_sli_flush_fcp_rings(phba);
+}
+
+/**
* lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
@@ -7145,6 +7194,7 @@
* as desired.
*
* Return codes
+ * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
@@ -7153,33 +7203,26 @@
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- if (state == pci_channel_io_perm_failure) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0472 PCI channel I/O permanent failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
- /* Clean up all driver's outstanding SCSI I/Os */
- lpfc_sli_flush_fcp_rings(phba);
+ switch (state) {
+ case pci_channel_io_normal:
+ /* Non-fatal error, do nothing */
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ /* Fatal error, prepare for slot reset */
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ /* Permanent failure, prepare for device down */
+ lpfc_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
+ default:
+ /* Unknown state, prepare and request slot reset */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0472 Unknown PCI error state: x%x\n", state);
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
}
-
- pci_disable_device(pdev);
- /*
- * There may be I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
- /* Disable interrupt */
- lpfc_sli_disable_intr(phba);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
}
/**
@@ -7259,7 +7302,12 @@
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Bring the device online */
lpfc_online(phba);
+
+ /* Clean up Advanced Error Reporting (AER) if needed */
+ if (phba->hba_flag & HBA_AER_ENABLED)
+ pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**