edac: move dimm properties to struct dimm_info
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.
However, such assumption is not true for all types of memory
controllers.
Controllers for FB-DIMM's don't have such requirements.
Also, modern Intel controllers seem to be capable of handling such
differences.
So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.
The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
index 68dea87..5ed97f6 100644
--- a/drivers/edac/e7xxx_edac.c
+++ b/drivers/edac/e7xxx_edac.c
@@ -347,11 +347,12 @@
int dev_idx, u32 drc)
{
unsigned long last_cumul_size;
- int index;
+ int index, j;
u8 value;
u32 dra, cumul_size;
int drc_chan, drc_drbg, drc_ddim, mem_dev;
struct csrow_info *csrow;
+ struct dimm_info *dimm;
pci_read_config_dword(pdev, E7XXX_DRA, &dra);
drc_chan = dual_channel_active(drc, dev_idx);
@@ -381,24 +382,29 @@
csrow->last_page = cumul_size - 1;
csrow->nr_pages = cumul_size - last_cumul_size;
last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
- csrow->mtype = MEM_RDDR; /* only one type supported */
- csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
- /*
- * if single channel or x8 devices then SECDED
- * if dual channel and x4 then S4ECD4ED
- */
- if (drc_ddim) {
- if (drc_chan && mem_dev) {
- csrow->edac_mode = EDAC_S4ECD4ED;
- mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
- } else {
- csrow->edac_mode = EDAC_SECDED;
- mci->edac_cap |= EDAC_FLAG_SECDED;
- }
- } else
- csrow->edac_mode = EDAC_NONE;
+ for (j = 0; j < drc_chan + 1; j++) {
+ dimm = csrow->channels[j].dimm;
+
+ dimm->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+ dimm->mtype = MEM_RDDR; /* only one type supported */
+ dimm->dtype = mem_dev ? DEV_X4 : DEV_X8;
+
+ /*
+ * if single channel or x8 devices then SECDED
+ * if dual channel and x4 then S4ECD4ED
+ */
+ if (drc_ddim) {
+ if (drc_chan && mem_dev) {
+ dimm->edac_mode = EDAC_S4ECD4ED;
+ mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+ } else {
+ dimm->edac_mode = EDAC_SECDED;
+ mci->edac_cap |= EDAC_FLAG_SECDED;
+ }
+ } else
+ dimm->edac_mode = EDAC_NONE;
+ }
}
}