| commit | 542816bb39199144ac1b4d269ba07d541caa8436 | [log] [tgz] |
|---|---|---|
| author | Caleb Connolly <caleb@connolly.tech> | Thu Aug 12 15:31:07 2021 +0100 |
| committer | Caleb Connolly <caleb@connolly.tech> | Fri Aug 13 16:51:05 2021 +0100 |
| tree | 60cca06e35c1c9ae30823e9b44508a54b06f02cb | |
| parent | bcb382a8abdafcb0c9802f3b40e6ee9b3908a5e3 [diff] |
vibrator: rework effects and fix bugs Rework the EV_FF interfacing to avoid abusing the API, the new implementation builds the effects during initialisation and uploads them all, then when playing an effect we look up the id of the effect to play and send the play command. Then when off() is called we send a stop command for that effect ID. This implementation lends itself much better to the EV_FF API and can easily be expanded to support newer HAL versions with richer effects. Sometimes seeing: "E VibratorService: Failed to issue command to vibrator HAL. Retrying." but not sure what causes it.
This device repo aims to support booting AOSP on SDM845 devices supported by the mainline Linux kernel.
IMPORTANT NOTICE --> UNLOCKING AND ROOTING MAY VOID YOUR PHONE WARRANTY AND MAY BRICK YOUR DEVICE AS WELL. I'M NOT RESPONSIBLE FOR EITHER OF THAT.
Here is a reasonable guide to get you started on unlocking and rooting Poco F1 --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
Just for the records I downloaded and installed following external packages to unlock and root my device-->
Also Dont forget to take a backup of your images from TWRP and copy them to your Host machine. It will come very handy. Believe me :)
mkdir aosp-repo cd aosp-repo repo init -u https://android.googlesource.com/platform/manifest -b master git clone https://github.com/pundiramit/android-local-manifests.git .repo/local_manifests -b master repo sync -j$nproc source build/envsetup.sh # See table above lunch <codename>-userdebug # Where <codename> is the codename of your device make -j$nproc
NOTE: To get display working on SDM845, we need supported Adreno firmware binaries, otherwise the device will not boot to UI.
Adreno binaries are shipped with non-distributable license,
hence I'm not shipping them in my build setup. You can
extract Adreno a630_* firmware binaries from a working
device build. I extracted mine from
lineage-16.0-20190612-nightly-beryllium-signed.zip ;)
OnePlus 6 firmware can be obtained here: https://gitlab.com/sdm845-mainline/firmware-oneplus-sdm845, copy the contents
of the postmarketos subdirectory up a level.
It will need to be supplemented by a630_sqe.fw from
linux-firmware.
Then copy the binaries to out vendor directory
i.e. out/target/product/beryllium/vendor/firmware,
and run "make -j$nproc" to create vendor.img again.
fastboot flash system system.img fastboot flash vendor vendor.img fastboot flash userdata userdata.img fastboot flash boot boot.img fastboot reboot
mkdir kernel-repo cd kernel-repo repo init -u https://android.googlesource.com/kernel/manifest -b common-android-mainline git clone git@github.com:pundiramit/android-local-manifests.git .repo/local_manifests -b kernel repo sync -j$nproc BUILD_CONFIG=beryllium/build.config.beryllium ./build/build.sh
cd aosp-repo source build/envsetup.sh lunch beryllium-userdebug make TARGET_KERNEL_USE=mainline -j$nproc
Now reflash the images as above and boot with your custom kernel.
NOTE:
By default the above instructions will sync/download beryllium-android-mainline branch to kernel-repo/beryllium directory. If you want to reproduce android12-5.4 or GKI build then checkout common-android12-5.4 repo manifest and beryllium-android-5.4 branch instead.