README: link to wiki
Change-Id: I37c85a02f3c4e5d606b443a3ffac65c31b283927
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
diff --git a/README.md b/README.md
index 55b9aa6..f105a4d 100644
--- a/README.md
+++ b/README.md
@@ -2,148 +2,4 @@
This device repo aims to support booting AOSP on SDM845 devices supported by the mainline Linux kernel.
-## Supported devices
-
-* OnePlus 6 (enchilada)
-* Xiaomi PocoPhone F1 (beryllium)
-
-# How to unlock and root Poco F1?
-```
-IMPORTANT NOTICE -->
-
-UNLOCKING AND ROOTING MAY VOID YOUR PHONE WARRANTY AND
-MAY BRICK YOUR DEVICE AS WELL. I'M NOT RESPONSIBLE FOR
-EITHER OF THAT.
-```
-
-Here is a reasonable guide to get you started on
-unlocking and rooting Poco F1 -->
-https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
-
-Just for the records I downloaded and installed following
-external packages to unlock and root my device-->
-* miflash_unlock-en-3.3.525.23.zip (MS Windows only tool for unlocking)
-* twrp-3.3.0-0-beryllium.img (Recovery)
-* beryllium-9.6.10-9.0-vendor-firmware.zip (LineageOS dependency)
-* lineage-16.0-20190612-nightly-beryllium-signed.zip
-* Magisk-v19.3.zip (Root)
-* MagiskManager-v7.2.0.apk
-
-Also Dont forget to take a backup of your images from
-TWRP and copy them to your Host machine. It will come
-very handy. Believe me :)
-
-# How to build and flash AOSP images?
-
-* Download source and build AOSP images
-
-```bash
-mkdir aosp-repo
-cd aosp-repo
-repo init -u https://android.googlesource.com/platform/manifest -b master
-git clone https://github.com/aospm/android_local_manifests .repo/local_manifests -b main
-repo sync -j$nproc
-source build/envsetup.sh
-# See table above
-lunch <codename>-userdebug # Where <codename> is the codename of your device
-make -j$nproc
-```
-
- NOTE: To get display working on SDM845, we need supported Adreno
- firmware binaries, otherwise the device will not boot to UI.
-
- Adreno binaries are shipped with non-distributable license,
- hence I'm not shipping them in my build setup. You can
- extract Adreno a630_* firmware binaries from a working
- device build. I extracted mine from
- lineage-16.0-20190612-nightly-beryllium-signed.zip ;)
-
- OnePlus 6 firmware can be obtained here: https://gitlab.com/sdm845-mainline/firmware-oneplus-sdm845/-/tree/aosp
- Make sure you clone the aosp branch.
-
- Copy the contents to `out/target/product/sdm845/vendor/firmware`
- (adjust sdm845 to your lunch target) and run "make -j$nproc" to#
- create vendor.img again.
-
-* Flash and boot AOSP images -->
-
-```
-fastboot flash system system.img
-fastboot flash vendor vendor.img
-fastboot flash userdata userdata.img
-fastboot flash boot boot.img
-fastboot reboot
-```
-
-# How to run custom kernels?
-
-These steps only work for android-mainline kernels which android build files included. You may also want to build your own kernels manually and copy the output.
-After building your kernel, do:
-```
-make <make flags> INSTALL_MOD_PATH=modules modules_install
-```
-Then see [this gist](https://gist.github.com/calebccff/9444e896d8befeb0f9a772d28480d38d) for an example script to copy kernel build output.
-
-* Run following commands to clone the kernel source and
- prebuilt Android toolchains and build scripts:
-
-```
-mkdir kernel-repo
-cd kernel-repo
-repo init -u https://android.googlesource.com/kernel/manifest -b common-android-mainline
-git clone git@github.com:pundiramit/android-local-manifests.git .repo/local_manifests -b kernel
-repo sync -j$nproc
-BUILD_CONFIG=beryllium/build.config.beryllium ./build/build.sh
-```
-
-* Delete all objects in aosp-repo/device/generic/sdm845/prebuilt-kernel/android-mainline/
- then copy build artifacts from kernel-repo/out/beryllium-android-mainline/dist/ to
- aosp-repo/device/generic/sdm845/prebuilt-kernel/android-mainline/ build
- AOSP images again.
-
-```
-cd aosp-repo
-source build/envsetup.sh
-lunch beryllium-userdebug
-make TARGET_KERNEL_USE=mainline -j$nproc
-```
-
-* Now reflash the images as above and boot with your custom kernel.
-
- NOTE:
-
- By default the above instructions will sync/download
- beryllium-android-mainline branch to kernel-repo/beryllium directory.
- If you want to reproduce android12-5.4 or GKI build then checkout
- common-android12-5.4 repo manifest and beryllium-android-5.4 branch instead.
-
-## Debugging boot failures
-
-If the latest AOSP manifests don't boot for you, I (try to) maintain a known-booting manifest for AOSP builds with fixed SHA's for each project, try the following:
-
-```sh
-# First save the current broken manifest for later debugging
-repo manifest -r -o upstream-broken-manifest.xml
-# Check out the known-booting manifest
-pushd .repo/manifests
-git remote add aospm https://github.com/aospm/platform_manifest.git
-git fetch aospm
-git checkout aospm/aospm/booting
-popd
-repo init -m aospm-booting.xml
-repo sync -j4
-```
-
-Then try and build again, if that fixes your build you can start to narrow down the problem by generating a diff between the booting manifest and the upstream one
-
-```sh
-diff .repo/manifests/aospm-booting.xml upstream-broken-manifest.xml
-```
-
-
-# ToDo -->
-* LEDs and Brightness Control
-* Camera
-* Modem / RIL / Voice Call
-* Battery Stats
-* Sensors and Accelerometers
+For more information, please check out the [wiki](https://github.com/aospm/android_device_generic_sdm845/wiki).