dsa: Rename switch chip data to cd
The dsa_switch structure contains a dsa_chip_data member called pd.
However in the rest of the code, pd is used for dsa_platform_data.
This is confusing. Rename it cd, which is already often used in dsa.c
and slave.c for this data type.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 448deb5..10ddd5a 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -949,8 +949,8 @@
/* All the interesting properties are at the parent device_node
* level
*/
- dn = ds->pd->of_node->parent;
- bcm_sf2_identify_ports(priv, ds->pd->of_node);
+ dn = ds->cd->of_node->parent;
+ bcm_sf2_identify_ports(priv, ds->cd->of_node);
priv->irq0 = irq_of_parse_and_map(dn, 0);
priv->irq1 = irq_of_parse_and_map(dn, 1);
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 8659cba..ee78309 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -3023,9 +3023,9 @@
for (i = 0; i < 32; i++) {
int nexthop = 0x1f;
- if (ps->ds->pd->rtable &&
+ if (ps->ds->cd->rtable &&
i != ps->ds->index && i < ps->ds->dst->pd->nr_chips)
- nexthop = ps->ds->pd->rtable[i] & 0x1f;
+ nexthop = ps->ds->cd->rtable[i] & 0x1f;
err = _mv88e6xxx_reg_write(
ps, REG_GLOBAL2,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index f4c0bff..17c3d37 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -137,7 +137,7 @@
/*
* Configuration data for this switch.
*/
- struct dsa_chip_data *pd;
+ struct dsa_chip_data *cd;
/*
* The used switch driver.
@@ -190,7 +190,7 @@
if (dst->cpu_switch == ds->index)
return dst->cpu_port;
else
- return ds->pd->rtable[dst->cpu_switch];
+ return ds->cd->rtable[dst->cpu_switch];
}
struct switchdev_trans;
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 5db779c..eff5dfc 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -182,7 +182,7 @@
/* basic switch operations **************************************************/
static int dsa_cpu_dsa_setup(struct dsa_switch *ds, struct net_device *master)
{
- struct dsa_chip_data *cd = ds->pd;
+ struct dsa_chip_data *cd = ds->cd;
struct device_node *port_dn;
struct phy_device *phydev;
int ret, port, mode;
@@ -219,7 +219,7 @@
{
struct dsa_switch_driver *drv = ds->drv;
struct dsa_switch_tree *dst = ds->dst;
- struct dsa_chip_data *pd = ds->pd;
+ struct dsa_chip_data *cd = ds->cd;
bool valid_name_found = false;
int index = ds->index;
int i, ret;
@@ -230,7 +230,7 @@
for (i = 0; i < DSA_MAX_PORTS; i++) {
char *name;
- name = pd->port_names[i];
+ name = cd->port_names[i];
if (name == NULL)
continue;
@@ -328,10 +328,10 @@
if (!(ds->enabled_port_mask & (1 << i)))
continue;
- ret = dsa_slave_create(ds, parent, i, pd->port_names[i]);
+ ret = dsa_slave_create(ds, parent, i, cd->port_names[i]);
if (ret < 0) {
netdev_err(dst->master_netdev, "[%d]: can't create dsa slave device for port %d(%s): %d\n",
- index, i, pd->port_names[i], ret);
+ index, i, cd->port_names[i], ret);
ret = 0;
}
}
@@ -379,7 +379,7 @@
dsa_switch_setup(struct dsa_switch_tree *dst, int index,
struct device *parent, struct device *host_dev)
{
- struct dsa_chip_data *pd = dst->pd->chip + index;
+ struct dsa_chip_data *cd = dst->pd->chip + index;
struct dsa_switch_driver *drv;
struct dsa_switch *ds;
int ret;
@@ -389,7 +389,7 @@
/*
* Probe for switch model.
*/
- drv = dsa_switch_probe(parent, host_dev, pd->sw_addr, &name, &priv);
+ drv = dsa_switch_probe(parent, host_dev, cd->sw_addr, &name, &priv);
if (drv == NULL) {
netdev_err(dst->master_netdev, "[%d]: could not detect attached switch\n",
index);
@@ -408,7 +408,7 @@
ds->dst = dst;
ds->index = index;
- ds->pd = pd;
+ ds->cd = cd;
ds->drv = drv;
ds->priv = priv;
ds->dev = parent;
@@ -424,7 +424,7 @@
{
struct device_node *port_dn;
struct phy_device *phydev;
- struct dsa_chip_data *cd = ds->pd;
+ struct dsa_chip_data *cd = ds->cd;
int port;
#ifdef CONFIG_NET_DSA_HWMON
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index f25dcd9..152436c 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -50,7 +50,7 @@
ds->slave_mii_bus->read = dsa_slave_phy_read;
ds->slave_mii_bus->write = dsa_slave_phy_write;
snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "dsa-%d:%.2x",
- ds->index, ds->pd->sw_addr);
+ ds->index, ds->cd->sw_addr);
ds->slave_mii_bus->parent = ds->dev;
ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
}
@@ -615,8 +615,8 @@
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
- if (ds->pd->eeprom_len)
- return ds->pd->eeprom_len;
+ if (ds->cd->eeprom_len)
+ return ds->cd->eeprom_len;
if (ds->drv->get_eeprom_len)
return ds->drv->get_eeprom_len(ds);
@@ -999,7 +999,7 @@
struct net_device *slave_dev)
{
struct dsa_switch *ds = p->parent;
- struct dsa_chip_data *cd = ds->pd;
+ struct dsa_chip_data *cd = ds->cd;
struct device_node *phy_dn, *port_dn;
bool phy_is_fixed = false;
u32 phy_flags = 0;
@@ -1147,7 +1147,7 @@
NULL);
SET_NETDEV_DEV(slave_dev, parent);
- slave_dev->dev.of_node = ds->pd->port_dn[port];
+ slave_dev->dev.of_node = ds->cd->port_dn[port];
slave_dev->vlan_features = master->vlan_features;
p = netdev_priv(slave_dev);