[PATCH] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable
Abstract the gpio operations into a new nsc_gpio_ops vtable.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/include/linux/nsc_gpio.h b/include/linux/nsc_gpio.h
new file mode 100644
index 0000000..3ad8ae9
--- /dev/null
+++ b/include/linux/nsc_gpio.h
@@ -0,0 +1,33 @@
+/**
+ nsc_gpio.c
+
+ National Semiconductor GPIO common access methods.
+
+ struct nsc_gpio_ops abstracts the low-level access
+ operations for the GPIO units on 2 NSC chip families; the GEODE
+ integrated CPU, and the PC-8736[03456] integrated PC-peripheral
+ chips.
+
+ The GPIO units on these chips have the same pin architecture, but
+ the access methods differ. Thus, scx200_gpio and pc8736x_gpio
+ implement their own versions of these routines; and use the common
+ file-operations routines implemented in nsc_gpio module.
+
+ Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+
+ NB: this work was tested on the Geode SC-1100 and PC-87366 chips.
+ NSC sold the GEODE line to AMD, and the PC-8736x line to Winbond.
+*/
+
+struct nsc_gpio_ops {
+ struct module* owner;
+ u32 (*gpio_config) (unsigned iminor, u32 mask, u32 bits);
+ void (*gpio_dump) (unsigned iminor);
+ int (*gpio_get) (unsigned iminor);
+ void (*gpio_set) (unsigned iminor, int state);
+ void (*gpio_set_high)(unsigned iminor);
+ void (*gpio_set_low) (unsigned iminor);
+ void (*gpio_change) (unsigned iminor);
+ int (*gpio_current) (unsigned iminor);
+};
+