r8152: support ethtool eee
Support get_eee() and set_eee() of ethtool_ops.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 887b6a2..a4d4c4a 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -131,7 +131,9 @@
#define OCP_SRAM_ADDR 0xa436
#define OCP_SRAM_DATA 0xa438
#define OCP_DOWN_SPEED 0xa442
+#define OCP_EEE_ABLE 0xa5c4
#define OCP_EEE_ADV 0xa5d0
+#define OCP_EEE_LPABLE 0xa5d2
#define OCP_ADC_CFG 0xbc06
/* SRAM Register */
@@ -572,6 +574,8 @@
void (*up)(struct r8152 *);
void (*down)(struct r8152 *);
void (*unload)(struct r8152 *);
+ int (*eee_get)(struct r8152 *, struct ethtool_eee *);
+ int (*eee_set)(struct r8152 *, struct ethtool_eee *);
} rtl_ops;
int intr_interval;
@@ -3366,6 +3370,122 @@
}
}
+static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+ u32 ocp_data, lp, adv, supported = 0;
+ u16 val;
+
+ val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+ supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+ val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
+ adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
+ lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+ ocp_data &= EEE_RX_EN | EEE_TX_EN;
+
+ eee->eee_enabled = !!ocp_data;
+ eee->eee_active = !!(supported & adv & lp);
+ eee->supported = supported;
+ eee->advertised = adv;
+ eee->lp_advertised = lp;
+
+ return 0;
+}
+
+static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+ u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+ r8152_eee_en(tp, eee->eee_enabled);
+
+ if (!eee->eee_enabled)
+ val = 0;
+
+ r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
+
+ return 0;
+}
+
+static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+ u32 ocp_data, lp, adv, supported = 0;
+ u16 val;
+
+ val = ocp_reg_read(tp, OCP_EEE_ABLE);
+ supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+ val = ocp_reg_read(tp, OCP_EEE_ADV);
+ adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ val = ocp_reg_read(tp, OCP_EEE_LPABLE);
+ lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+ ocp_data &= EEE_RX_EN | EEE_TX_EN;
+
+ eee->eee_enabled = !!ocp_data;
+ eee->eee_active = !!(supported & adv & lp);
+ eee->supported = supported;
+ eee->advertised = adv;
+ eee->lp_advertised = lp;
+
+ return 0;
+}
+
+static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+ u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+ r8153_eee_en(tp, eee->eee_enabled);
+
+ if (!eee->eee_enabled)
+ val = 0;
+
+ ocp_reg_write(tp, OCP_EEE_ADV, val);
+
+ return 0;
+}
+
+static int
+rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+ struct r8152 *tp = netdev_priv(net);
+ int ret;
+
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
+
+ ret = tp->rtl_ops.eee_get(tp, edata);
+
+ usb_autopm_put_interface(tp->intf);
+
+out:
+ return ret;
+}
+
+static int
+rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+ struct r8152 *tp = netdev_priv(net);
+ int ret;
+
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
+
+ ret = tp->rtl_ops.eee_set(tp, edata);
+
+ usb_autopm_put_interface(tp->intf);
+
+out:
+ return ret;
+}
+
static struct ethtool_ops ops = {
.get_drvinfo = rtl8152_get_drvinfo,
.get_settings = rtl8152_get_settings,
@@ -3378,6 +3498,8 @@
.get_strings = rtl8152_get_strings,
.get_sset_count = rtl8152_get_sset_count,
.get_ethtool_stats = rtl8152_get_ethtool_stats,
+ .get_eee = rtl_ethtool_get_eee,
+ .set_eee = rtl_ethtool_set_eee,
};
static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -3519,6 +3641,8 @@
ops->up = rtl8152_up;
ops->down = rtl8152_down;
ops->unload = rtl8152_unload;
+ ops->eee_get = r8152_get_eee;
+ ops->eee_set = r8152_set_eee;
ret = 0;
break;
case PRODUCT_ID_RTL8153:
@@ -3528,6 +3652,8 @@
ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
+ ops->eee_get = r8153_get_eee;
+ ops->eee_set = r8153_set_eee;
ret = 0;
break;
default:
@@ -3544,6 +3670,8 @@
ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
+ ops->eee_get = r8153_get_eee;
+ ops->eee_set = r8153_set_eee;
ret = 0;
break;
default: