clk: bcm2835: add missing osc and per clocks
Add AVE0, DFT, GP0, GP1, GP2, SLIM, SMI, TEC, DPI, CAM0, CAM1, DSI0E,
and DSI1E. PULSE is not added because it has an extra divider.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index fa444d0..4c0f1b5 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -117,6 +117,8 @@
#define CM_SDCCTL 0x1a8
#define CM_SDCDIV 0x1ac
#define CM_ARMCTL 0x1b0
+#define CM_AVEOCTL 0x1b8
+#define CM_AVEODIV 0x1bc
#define CM_EMMCCTL 0x1c0
#define CM_EMMCDIV 0x1c4
@@ -1594,6 +1596,12 @@
.div_reg = CM_TSENSDIV,
.int_bits = 5,
.frac_bits = 0),
+ [BCM2835_CLOCK_TEC] = REGISTER_OSC_CLK(
+ .name = "tec",
+ .ctl_reg = CM_TECCTL,
+ .div_reg = CM_TECDIV,
+ .int_bits = 6,
+ .frac_bits = 0),
/* clocks with vpu parent mux */
[BCM2835_CLOCK_H264] = REGISTER_VPU_CLK(
@@ -1608,6 +1616,7 @@
.div_reg = CM_ISPDIV,
.int_bits = 4,
.frac_bits = 8),
+
/*
* Secondary SDRAM clock. Used for low-voltage modes when the PLL
* in the SDRAM controller can't be used.
@@ -1639,6 +1648,36 @@
.is_vpu_clock = true),
/* clocks with per parent mux */
+ [BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK(
+ .name = "aveo",
+ .ctl_reg = CM_AVEOCTL,
+ .div_reg = CM_AVEODIV,
+ .int_bits = 4,
+ .frac_bits = 0),
+ [BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK(
+ .name = "cam0",
+ .ctl_reg = CM_CAM0CTL,
+ .div_reg = CM_CAM0DIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ [BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK(
+ .name = "cam1",
+ .ctl_reg = CM_CAM1CTL,
+ .div_reg = CM_CAM1DIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ [BCM2835_CLOCK_DFT] = REGISTER_PER_CLK(
+ .name = "dft",
+ .ctl_reg = CM_DFTCTL,
+ .div_reg = CM_DFTDIV,
+ .int_bits = 5,
+ .frac_bits = 0),
+ [BCM2835_CLOCK_DPI] = REGISTER_PER_CLK(
+ .name = "dpi",
+ .ctl_reg = CM_DPICTL,
+ .div_reg = CM_DPIDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
/* Arasan EMMC clock */
[BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK(
@@ -1647,6 +1686,29 @@
.div_reg = CM_EMMCDIV,
.int_bits = 4,
.frac_bits = 8),
+
+ /* General purpose (GPIO) clocks */
+ [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK(
+ .name = "gp0",
+ .ctl_reg = CM_GP0CTL,
+ .div_reg = CM_GP0DIV,
+ .int_bits = 12,
+ .frac_bits = 12,
+ .is_mash_clock = true),
+ [BCM2835_CLOCK_GP1] = REGISTER_PER_CLK(
+ .name = "gp1",
+ .ctl_reg = CM_GP1CTL,
+ .div_reg = CM_GP1DIV,
+ .int_bits = 12,
+ .frac_bits = 12,
+ .is_mash_clock = true),
+ [BCM2835_CLOCK_GP2] = REGISTER_PER_CLK(
+ .name = "gp2",
+ .ctl_reg = CM_GP2CTL,
+ .div_reg = CM_GP2DIV,
+ .int_bits = 12,
+ .frac_bits = 12),
+
/* HDMI state machine */
[BCM2835_CLOCK_HSM] = REGISTER_PER_CLK(
.name = "hsm",
@@ -1668,12 +1730,26 @@
.int_bits = 12,
.frac_bits = 12,
.is_mash_clock = true),
+ [BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK(
+ .name = "slim",
+ .ctl_reg = CM_SLIMCTL,
+ .div_reg = CM_SLIMDIV,
+ .int_bits = 12,
+ .frac_bits = 12,
+ .is_mash_clock = true),
+ [BCM2835_CLOCK_SMI] = REGISTER_PER_CLK(
+ .name = "smi",
+ .ctl_reg = CM_SMICTL,
+ .div_reg = CM_SMIDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
[BCM2835_CLOCK_UART] = REGISTER_PER_CLK(
.name = "uart",
.ctl_reg = CM_UARTCTL,
.div_reg = CM_UARTDIV,
.int_bits = 10,
.frac_bits = 12),
+
/* TV encoder clock. Only operating frequency is 108Mhz. */
[BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
.name = "vec",
@@ -1682,6 +1758,20 @@
.int_bits = 4,
.frac_bits = 0),
+ /* dsi clocks */
+ [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK(
+ .name = "dsi0e",
+ .ctl_reg = CM_DSI0ECTL,
+ .div_reg = CM_DSI0EDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ [BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK(
+ .name = "dsi1e",
+ .ctl_reg = CM_DSI1ECTL,
+ .div_reg = CM_DSI1EDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+
/* the gates */
/*
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
index a001e38..360e00c 100644
--- a/include/dt-bindings/clock/bcm2835.h
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -50,3 +50,17 @@
#define BCM2835_PLLA_CCP2 33
#define BCM2835_PLLD_DSI0 34
#define BCM2835_PLLD_DSI1 35
+
+#define BCM2835_CLOCK_AVEO 36
+#define BCM2835_CLOCK_DFT 37
+#define BCM2835_CLOCK_GP0 38
+#define BCM2835_CLOCK_GP1 39
+#define BCM2835_CLOCK_GP2 40
+#define BCM2835_CLOCK_SLIM 41
+#define BCM2835_CLOCK_SMI 42
+#define BCM2835_CLOCK_TEC 43
+#define BCM2835_CLOCK_DPI 44
+#define BCM2835_CLOCK_CAM0 45
+#define BCM2835_CLOCK_CAM1 46
+#define BCM2835_CLOCK_DSI0E 47
+#define BCM2835_CLOCK_DSI1E 48