Merge branch 'spear/pinctrl' into spear/clock
Conflicts:
arch/arm/mach-spear3xx/Makefile
arch/arm/mach-spear3xx/clock.c
arch/arm/mach-spear3xx/include/mach/generic.h
arch/arm/mach-spear6xx/clock.c
arch/arm/plat-spear/Makefile
drivers/pinctrl/core.c
This resolves some annoying merge conflicts.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
index 3fd3ce5..5274c24 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
@@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-NV12M">
<refmeta>
- <refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+ <refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
index 9957863..60308f1 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
@@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-YUV420M">
<refmeta>
- <refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+ <refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
diff --git a/MAINTAINERS b/MAINTAINERS
index cf900fc..27085a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1882,6 +1882,16 @@
F: fs/coda/
F: include/linux/coda*.h
+COMMON CLK FRAMEWORK
+M: Mike Turquette <mturquette@ti.com>
+M: Mike Turquette <mturquette@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
+T: git git://git.linaro.org/people/mturquette/linux.git
+S: Maintained
+F: drivers/clk/clk.c
+F: drivers/clk/clk-*
+F: include/linux/clk-pr*
+
COMMON INTERNET FILE SYSTEM (CIFS)
M: Steve French <sfrench@samba.org>
L: linux-cifs@vger.kernel.org
@@ -2321,9 +2331,9 @@
F: drivers/acpi/dock.c
DOCUMENTATION
-M: Randy Dunlap <rdunlap@xenotime.net>
+M: Rob Landley <rob@landley.net>
L: linux-doc@vger.kernel.org
-T: quilt http://xenotime.net/kernel-doc-patches/current/
+T: TBD
S: Maintained
F: Documentation/
@@ -6334,9 +6344,7 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
-F: arch/arm/mach-spear*/clock.c
-F: arch/arm/plat-spear/clock.c
-F: arch/arm/plat-spear/include/plat/clock.h
+F: drivers/clk/spear/
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
diff --git a/Makefile b/Makefile
index f6578f4..afc868e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 4
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d4..ce030c2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -980,6 +980,7 @@
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index b5ac644..6b31cb6 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -112,6 +112,7 @@
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 889d73a..7e84f45 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -8,8 +8,6 @@
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 99ce5c9..05774e5 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1173,7 +1173,6 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index dd7f782..104ca40 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
+#include <linux/export.h>
#include <asm/mach/time.h>
@@ -176,6 +177,7 @@
};
void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
void __init at91rm9200_ioremap_st(u32 addr)
{
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 11cbaa8..b2e4fe2 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -117,7 +117,7 @@
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE SZ_2M
+#define EK_FLASH_SIZE SZ_8M
static struct physmap_flash_data ek_flash_data = {
.width = 2,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c3f9944..065fed3 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -85,8 +85,6 @@
.flags = IORESOURCE_MEM
},
[2] = {
- .start = AT91_PIN_PC11,
- .end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
@@ -130,6 +128,8 @@
static void __init ek_add_device_dm9000(void)
{
+ struct resource *r = &dm9000_resource[2];
+
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(0, 2, &dm9000_smc_config);
@@ -139,6 +139,7 @@
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
+ r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
platform_device_register(&dm9000_device);
}
#else
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a0f4d74..6b69282 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -35,6 +35,7 @@
#include "generic.h"
void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
/*
* There's a lot more which can be done with clocks, including cpufreq
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 3660478..ea2c57a 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -25,7 +25,7 @@
#define at91_pmc_write(field, value) \
__raw_writel(value, at91_pmc_base + field)
#else
-.extern at91_aic_base
+.extern at91_pmc_base
#endif
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 97cc04d..f44a2e7 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -54,6 +54,7 @@
}
void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
@@ -292,6 +293,7 @@
}
void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 22e4e0a..adbfb19 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,8 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 861ceb8..ed38d03 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -35,7 +35,7 @@
static int __init imx27_avic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- irq_domain_add_simple(np, 0);
+ irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@@ -44,7 +44,9 @@
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
- irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base -= 32;
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+ NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 05250ae..e10f391 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -35,7 +35,7 @@
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (tzic_enable_wake() != 0)
+ if (!tzic_enable_wake())
cpu_do_idle();
clk_disable(gpc_dvfs_clk);
}
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 087dba0..e9cc52d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <mach/hardware.h>
#include <plat/mux.h>
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 6e90665..fb202af 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -47,9 +47,9 @@
int n = (pdev->id - 1) << 1;
u32 l;
- l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
- __raw_writel(l, MOD_CONF_CTRL_1);
+ omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index a39fc4b..130ab00 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -20,6 +20,7 @@
#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -560,7 +561,7 @@
},
};
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@@ -568,7 +569,7 @@
.hf_right_step = 0x1d,
};
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
.vibldrv_res = 8,
.vibrdrv_res = 3,
.viblmotor_res = 10,
@@ -577,16 +578,14 @@
.vddvibr_uV = 0, /* fixed volt supply - VBAT */
};
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
- .naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
- .audio = &twl6040_audio,
/* Regulators */
.vusim = &sdp4430_vusim,
.vaux1 = &sdp4430_vaux1,
@@ -617,7 +616,8 @@
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
- omap4_pmic_init("twl6030", &sdp4430_twldata);
+ omap4_pmic_init("twl6030", &sdp4430_twldata,
+ &twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 74e1687..098d183 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -137,7 +137,7 @@
static void __init omap4_i2c_init(void)
{
- omap4_pmic_init("twl6030", &sdp4430_twldata);
+ omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
}
static void __init omap4_init(void)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89..1b782ba 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
@@ -284,7 +285,7 @@
return 0;
}
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@@ -292,17 +293,14 @@
.hf_right_step = 0x1d,
};
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
- .naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
- .audio = &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
- omap4_pmic_init("twl6030", &omap4_panda_twldata);
+ omap4_pmic_init("twl6030", &omap4_panda_twldata,
+ &twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2c27fdb..7144ae6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1422,6 +1422,9 @@
goto dis_opt_clks;
_write_sysconfig(v, oh);
+ if (oh->class->sysc->srst_udelay)
+ udelay(oh->class->sysc->srst_udelay);
+
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
- if (!oh)
+ u32 v;
+ int ret;
+
+ if (!oh || !(oh->_sysc_cache))
return -EINVAL;
- return _ocp_softreset(oh);
+ v = oh->_sysc_cache;
+ ret = _set_softreset(oh, &v);
+ if (ret)
+ goto error;
+ _write_sysconfig(v, oh);
+
+error:
+ return ret;
}
/**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce..a6bde34 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1000,7 +1000,6 @@
.flags = OMAP_FIREWALL_L4,
}
},
- .flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb..04a3885 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1049,7 +1049,6 @@
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
- .flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d..db86ce9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1676,7 +1676,6 @@
.flags = OMAP_FIREWALL_L4,
}
},
- .flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index cc9bd10..6abc757 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2594,6 +2594,15 @@
static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
+ /*
+ * ISS needs 100 OCP clk cycles delay after a softreset before
+ * accessing sysconfig again.
+ * The lowest frequency at the moment for L3 bus is 100 MHz, so
+ * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+ *
+ * TODO: Indicate errata when available.
+ */
+ .srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359..9fc2f44 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -108,8 +108,14 @@
static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
+ u8 idlemode;
- omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+ if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+
+ omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
}
#else
@@ -120,124 +126,8 @@
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
- {
- .name = "uart1_cts.uart1_cts",
- .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- },
- {
- .name = "uart1_rts.uart1_rts",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart1_tx.uart1_tx",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart1_rx.uart1_rx",
- .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
- .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- },
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
- {
- .name = "uart2_cts.uart2_cts",
- .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- },
- {
- .name = "uart2_rts.uart2_rts",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart2_tx.uart2_tx",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart2_rx.uart2_rx",
- .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
- .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- },
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
- {
- .name = "uart3_cts_rctx.uart3_cts_rctx",
- .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
- },
- {
- .name = "uart3_rts_sd.uart3_rts_sd",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart3_tx_irtx.uart3_tx_irtx",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart3_rx_irrx.uart3_rx_irrx",
- .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
- .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
- .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
- },
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
- {
- .name = "gpmc_wait2.uart4_tx",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "gpmc_wait3.uart4_rx",
- .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
- .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
- .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
- },
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
- {
- .name = "uart4_tx.uart4_tx",
- .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
- },
- {
- .name = "uart4_rx.uart4_rx",
- .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
- .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
- .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
- },
-};
-
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
- switch (bdata->id) {
- case 0:
- bdata->pads = default_uart1_pads;
- bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
- break;
- case 1:
- bdata->pads = default_uart2_pads;
- bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
- break;
- case 2:
- bdata->pads = default_uart3_pads;
- bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
- break;
- case 3:
- if (cpu_is_omap44xx()) {
- bdata->pads = default_omap4_uart4_pads;
- bdata->pads_cnt =
- ARRAY_SIZE(default_omap4_uart4_pads);
- } else if (cpu_is_omap3630()) {
- bdata->pads = default_omap36xx_uart4_pads;
- bdata->pads_cnt =
- ARRAY_SIZE(default_omap36xx_uart4_pads);
- }
- break;
- default:
- break;
- }
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 4b57757..7a7b893 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -37,6 +37,16 @@
.flags = I2C_CLIENT_WAKE,
};
+static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
+ {
+ .addr = 0x48,
+ .flags = I2C_CLIENT_WAKE,
+ },
+ {
+ I2C_BOARD_INFO("twl6040", 0x4b),
+ },
+};
+
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
@@ -49,14 +59,31 @@
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
+void __init omap4_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data,
+ struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+{
+ /* PMIC part*/
+ strncpy(omap4_i2c1_board_info[0].type, pmic_type,
+ sizeof(omap4_i2c1_board_info[0].type));
+ omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+ omap4_i2c1_board_info[0].platform_data = pmic_data;
+
+ /* TWL6040 audio IC part */
+ omap4_i2c1_board_info[1].irq = twl6040_irq;
+ omap4_i2c1_board_info[1].platform_data = twl6040_data;
+
+ omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+
+}
+
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
- if (!pmic_i2c_board_info.irq)
- return;
-
- omap3_twl_init();
- omap4_twl_init();
+ if (pmic_i2c_board_info.irq)
+ omap3_twl_init();
+ if (omap4_i2c1_board_info[0].irq)
+ omap4_twl_init();
}
#if defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 275dde8..0962748 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -29,6 +29,7 @@
struct twl4030_platform_data;
+struct twl6040_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
@@ -46,12 +47,9 @@
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
-static inline void omap4_pmic_init(const char *pmic_type,
- struct twl4030_platform_data *pmic_data)
-{
- /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
- omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
+void omap4_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data,
+ struct twl6040_platform_data *audio_data, int twl6040_irq);
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index 17b5d83..8d12faa 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,7 +3,7 @@
#
# common files
-obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index eeafe38..0000000
--- a/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,794 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clkdev.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_24m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
- {
- .pclk = &gpt1_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt1_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from usbh clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &usbh_clk,
- .recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &usbh_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = C3_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
- defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
- /* root clks */
- CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
- CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
- /* clock derived from 32 KHz osc clk */
- CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
- /* clock derived from 24 MHz osc clk */
- CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
- CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
- CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
- /* clock derived from pll1 clk */
- CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
- CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
- CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
- CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
- CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
- CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
- CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
- CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
- CLKDEV_INIT("firda", NULL, &firda_clk),
- CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
- CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
- CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
- /* clock derived from pll3 clk */
- CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
- CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk),
- /* clock derived from usbh clk */
- CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
- CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
- /* clock derived from ahb clk */
- CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
- CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
- CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
- CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
- CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
- CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
- CLKDEV_INIT("c3", NULL, &c3_clk),
- /* clock derived from apb clk */
- CLKDEV_INIT("adc", NULL, &adc_clk),
- CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
- CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
- CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
- CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
- CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
- CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
-};
-
-void __init spear300_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
- clk_register(&spear300_clk_lookups[i]);
-
- clk_init();
-}
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
- CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT(NULL, "emi", &emi_clk),
- CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
- CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
- CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
- CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
-};
-
-void __init spear310_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
- clk_register(&spear310_clk_lookups[i]);
-
- clk_init();
-}
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
- CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
- CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
- CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
- CLKDEV_INIT(NULL, "emi", &emi_clk),
- CLKDEV_INIT("pwm", NULL, &pwm_clk),
- CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
- CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
- CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
- CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
- CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
- CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
-};
-
-void __init spear320_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
- clk_register(&spear320_clk_lookups[i]);
-
- clk_init();
-}
-#endif
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 9603bf4..c10eac6 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -37,27 +37,10 @@
/* Add spear3xx family function declarations here */
void __init spear_setup_timer(void);
+void __init spear3xx_clk_init(void);
void __init spear3xx_map_io(void);
void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-void __init spear300_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-void __init spear310_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-void __init spear320_clk_init(void);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8..50cfe0d 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -15,150 +15,8 @@
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
+#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 11
-#define GPT2_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB 3
-#define SSP_CLK_ENB 5
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FIRDA_CLK_ENB 10
-#define GPT1_CLK_ENB 11
-#define GPT2_CLK_ENB 12
-#define ADC_CLK_ENB 15
-#define RTC_CLK_ENB 17
-#define GPIO_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH_CLK_ENB 25
-#define C3_CLK_ENB 31
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
-#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
-
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 8e3900a..e7bc8ba 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -79,4 +79,17 @@
#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE
#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000)
+#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+ #define SPEAR320_UARTX_PCLK_MASK 0x1
+ #define SPEAR320_UART2_PCLK_SHIFT 8
+ #define SPEAR320_UART3_PCLK_SHIFT 9
+ #define SPEAR320_UART4_PCLK_SHIFT 10
+ #define SPEAR320_UART5_PCLK_SHIFT 11
+ #define SPEAR320_UART6_PCLK_SHIFT 12
+ #define SPEAR320_RS485_PCLK_SHIFT 13
+
#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 4812c69..fb28c18 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -22,6 +22,7 @@
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
+#include <mach/spear.h>
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 12bf879..71927c7 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -90,6 +90,8 @@
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear3xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750..898831d 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
#
# common files
-obj-y += clock.o spear6xx.o
+obj-y += spear6xx.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index adadef2..0000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_30m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART0_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART1_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
- .synth_reg = CLCD_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
- .en_reg = CLCD_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
- {
- .pclk = &clcd_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
- .pclk_info = clcd_pclk_info,
- .pclk_count = ARRAY_SIZE(clcd_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = CLCD_CLK_ENB,
- .pclk_sel = &clcd_pclk_sel,
- .pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
- {
- .pclk = &gpt3_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
- .pclk_info = gpt3_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt3_pclk_sel,
- .pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FSMC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
- /* root clks */
- CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
- CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
- /* clock derived from 32 KHz os clk */
- CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
- /* clock derived from 30 MHz os clk */
- CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
- CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
- CLKDEV_INIT("wdt", NULL, &wdt_clk),
- /* clock derived from pll1 clk */
- CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
- CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
- CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
- CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
- CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
- CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
- CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
- CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
- CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
- CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
- CLKDEV_INIT("firda", NULL, &firda_clk),
- CLKDEV_INIT("clcd", NULL, &clcd_clk),
- CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
- CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
- CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
- CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
- /* clock derived from pll3 clk */
- CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
- CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
- CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
- /* clock derived from ahb clk */
- CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
- CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
- CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
- CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
- CLKDEV_INIT("gmac", NULL, &gmac_clk),
- CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
- CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
- /* clock derived from apb clk */
- CLKDEV_INIT("adc", NULL, &adc_clk),
- CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
- CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
- CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
- CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
- CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
- CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
-};
-
-void __init spear6xx_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a0..633074f 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -15,160 +15,8 @@
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
+#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT 2
-#define CLCD_CLK_MASK 0x3
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 10
-#define GPT2_CLK_SHIFT 11
-#define GPT3_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB 3
-#define UART1_CLK_ENB 4
-#define SSP0_CLK_ENB 5
-#define SSP1_CLK_ENB 6
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FSMC_CLK_ENB 9
-#define FIRDA_CLK_ENB 10
-#define GPT2_CLK_ENB 11
-#define GPT3_CLK_ENB 12
-#define GPIO2_CLK_ENB 13
-#define SSP2_CLK_ENB 14
-#define ADC_CLK_ENB 15
-#define GPT1_CLK_ENB 11
-#define RTC_CLK_ENB 17
-#define GPIO1_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define CLCD_CLK_ENB 22
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH0_CLK_ENB 25
-#define USBH1_CLK_ENB 26
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
-#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
-
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5b9e30f..e9031ec6 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -418,9 +418,6 @@
void __init spear6xx_map_io(void)
{
iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
- /* This will initialize clock framework */
- spear6xx_clk_init();
}
static void __init spear6xx_timer_init(void)
@@ -428,6 +425,8 @@
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear6xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 880d02e..ef7099e 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -17,6 +17,7 @@
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
+ select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d2058ef..eff5842 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -99,7 +99,7 @@
*/
write_pen_release(cpu_logical_map(cpu));
- gic_raise_softirq(cpumask_of(cpu), 1);
+ smp_send_reschedule(cpu);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 8070145..3f26db4 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -305,6 +305,7 @@
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
@@ -330,9 +331,10 @@
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
+ struct omap_hwmod_sysc_fields *sysc_fields;
+ u8 srst_udelay;
u8 idlemodes;
u8 clockact;
- struct omap_hwmod_sysc_fields *sysc_fields;
};
/**
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index eec98af..f9a8c53 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -348,7 +348,6 @@
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
-#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -358,17 +357,18 @@
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
-#endif
return 0;
}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 7744802..38f1235 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o restart.o time.o pl080.o
+obj-y := restart.o time.o pl080.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd003..0000000
--- a/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return -EFAULT;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val &= ~(1 << clk->en_reg_bit);
- else
- val |= 1 << clk->en_reg_bit;
-
- writel(val, clk->en_reg);
-
- return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val |= 1 << clk->en_reg_bit;
- else
- val &= ~(1 << clk->en_reg_bit);
-
- writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
- .enable = generic_clk_enable,
- .disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
- unsigned int val, i;
- struct pclk_info *info = NULL;
-
- val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
-
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_val == val)
- info = &clk->pclk_sel->pclk_info[i];
- }
-
- return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&clk->sibling);
- list_add(&clk->sibling, &pclk_info->pclk->children);
-
- clk->pclk = pclk_info->pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- if (!clk->usage_count) {
- WARN_ON(1);
- return;
- }
-
- clk->usage_count--;
-
- if (clk->usage_count == 0) {
- /*
- * Surely, there are no active childrens or direct users
- * of this clock
- */
- if (clk->pclk)
- do_clk_disable(clk->pclk);
-
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
-}
-
-static int do_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EFAULT;
-
- if (clk->usage_count == 0) {
- if (clk->pclk) {
- ret = do_clk_enable(clk->pclk);
- if (ret)
- goto err;
- }
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->pclk)
- do_clk_disable(clk->pclk);
- goto err;
- }
- }
- /*
- * Since the clock is going to be used for the first
- * time please reclac
- */
- if (clk->recalc) {
- ret = clk->recalc(clk);
- if (ret)
- goto err;
- }
- }
- clk->usage_count++;
-err:
- return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = do_clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- do_clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- * This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags, rate;
-
- spin_lock_irqsave(&clocks_lock, flags);
- rate = clk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int i, found = 0, val = 0;
- unsigned long flags;
-
- if (!clk || !parent)
- return -EFAULT;
- if (clk->pclk == parent)
- return 0;
- if (!clk->pclk_sel)
- return -EPERM;
-
- /* check if requested parent is in clk parent list */
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk == parent) {
- found = 1;
- break;
- }
- }
-
- if (!found)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- /* reflect parent change in hardware */
- val = readl(clk->pclk_sel->pclk_sel_reg);
- val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
- writel(val, clk->pclk_sel->pclk_sel_reg);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* reflect parent change in software */
- clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
- propagate_rate(clk, 0);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!clk || !rate)
- return -EFAULT;
-
- if (clk->set_rate) {
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->set_rate(clk, rate);
- if (!ret)
- /* if successful -> propagate */
- propagate_rate(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
- } else if (clk->pclk) {
- u32 mult = clk->div_factor ? clk->div_factor : 1;
- ret = clk_set_rate(clk->pclk, mult * rate);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
- struct clk *clk;
- unsigned long flags;
-
- if (!cl || !cl->clk)
- return;
- clk = cl->clk;
-
- spin_lock_irqsave(&clocks_lock, flags);
-
- INIT_LIST_HEAD(&clk->children);
- if (clk->flags & ALWAYS_ENABLED)
- clk->ops = NULL;
- else if (!clk->ops)
- clk->ops = &generic_clkops;
-
- /* root clock don't have any parents */
- if (!clk->pclk && !clk->pclk_sel) {
- list_add(&clk->sibling, &root_clks);
- } else if (clk->pclk && !clk->pclk_sel) {
- /* add clocks with only one parent to parent's children list */
- list_add(&clk->sibling, &clk->pclk->children);
- } else {
- /* clocks with more than one parent */
- struct pclk_info *pclk_info;
-
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- pr_err("CLKDEV: invalid pclk info of clk with"
- " %s dev_id and %s con_id\n",
- cl->dev_id, cl->con_id);
- } else {
- clk->pclk = pclk_info->pclk;
- list_add(&clk->sibling, &pclk_info->pclk->children);
- }
- }
-
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
- list_add(&clk->node, &clocks);
- clk->cl = cl;
-#endif
-
- /* add clock to arm clockdev framework */
- clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
- struct clk *clk, *_temp;
- int ret = 0;
-
- list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
- if (clk->recalc) {
- ret = clk->recalc(clk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default rate.
- */
- if (ret && clk->set_rate)
- clk->set_rate(clk, 0);
- }
- propagate_rate(clk, on_init);
-
- if (!on_init)
- continue;
-
- /* Enable clks enabled on init, in software view */
- if (clk->flags & ENABLED_ON_INIT)
- do_clk_enable(clk);
- }
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
- unsigned long tmp = 0, prev_rate = 0;
- int index;
-
- if (!clk->calc_rate)
- return -EFAULT;
-
- if (!drate)
- return -EINVAL;
-
- /*
- * This loops ends on two conditions:
- * - as soon as clk is found with rate greater than requested rate.
- * - if all clks in rate_config are smaller than requested rate.
- */
- for (index = 0; index < clk->rate_config.count; index++) {
- prev_rate = tmp;
- tmp = clk->calc_rate(clk, index);
- if (drate < tmp) {
- index--;
- break;
- }
- }
- /* return if can't find suitable clock */
- if (index < 0) {
- index = -EINVAL;
- *rate = 0;
- } else if (index == clk->rate_config.count) {
- /* program with highest clk rate possible */
- index = clk->rate_config.count - 1;
- *rate = tmp;
- } else
- *rate = prev_rate;
-
- return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
- long rate = 0;
- int index;
-
- /*
- * propagate call to parent who supports calc_rate. Similar approach is
- * used in clk_set_rate.
- */
- if (!clk->calc_rate) {
- u32 mult;
- if (!clk->pclk)
- return clk->rate;
-
- mult = clk->div_factor ? clk->div_factor : 1;
- return clk_round_rate(clk->pclk, mult * drate) / mult;
- }
-
- index = round_rate_index(clk, drate, &rate);
- if (index >= 0)
- return rate;
- else
- return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- unsigned int mode;
-
- mode = tbls[index].mode ? 256 : 1;
- return (((2 * rate / 10000) * tbls[index].m) /
- (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
- struct pll_clk_config *config = clk->private_data;
- unsigned int num = 2, den = 0, val, mode = 0;
-
- mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
- config->masks->mode_mask;
-
- val = readl(config->cfg_reg);
- /* calculate denominator */
- den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
- den = 1 << den;
- den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
- /* calculate numerator & denominator */
- if (!mode) {
- /* Normal mode */
- num *= (val >> config->masks->norm_fdbk_m_shift) &
- config->masks->norm_fdbk_m_mask;
- } else {
- /* Dithered mode */
- num *= (val >> config->masks->dith_fdbk_m_shift) &
- config->masks->dith_fdbk_m_mask;
- den *= 256;
- }
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- struct pll_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->mode_reg) &
- ~(config->masks->mode_mask << config->masks->mode_shift);
- val |= (tbls[i].mode & config->masks->mode_mask) <<
- config->masks->mode_shift;
- writel(val, config->mode_reg);
-
- val = readl(config->cfg_reg) &
- ~(config->masks->div_p_mask << config->masks->div_p_shift);
- val |= (tbls[i].p & config->masks->div_p_mask) <<
- config->masks->div_p_shift;
- val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
- val |= (tbls[i].n & config->masks->div_n_mask) <<
- config->masks->div_n_shift;
- val &= ~(config->masks->dith_fdbk_m_mask <<
- config->masks->dith_fdbk_m_shift);
- if (tbls[i].mode)
- val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
- config->masks->dith_fdbk_m_shift;
- else
- val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
- config->masks->norm_fdbk_m_shift;
-
- writel(val, config->cfg_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
- struct bus_clk_config *config = clk->private_data;
- unsigned int div;
-
- div = ((readl(config->reg) >> config->masks->shift) &
- config->masks->mask) + 1;
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
- struct bus_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->reg) &
- ~(config->masks->mask << config->masks->shift);
- val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
- writel(val, config->reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2 EQ1
- * Fout2 = Fin * X/Y EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- u8 eq = tbls[index].eq ? 1 : 2;
-
- return (((rate/10000) * tbls[index].xscale) /
- (tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
- struct aux_clk_config *config = clk->private_data;
- unsigned int num = 1, den = 1, val, eqn;
-
- val = readl(config->synth_reg);
-
- eqn = (val >> config->masks->eq_sel_shift) &
- config->masks->eq_sel_mask;
- if (eqn == config->masks->eq1_mask)
- den *= 2;
-
- /* calculate numerator */
- num = (val >> config->masks->xscale_sel_shift) &
- config->masks->xscale_sel_mask;
-
- /* calculate denominator */
- den *= (val >> config->masks->yscale_sel_shift) &
- config->masks->yscale_sel_mask;
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- struct aux_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) &
- ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
- val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
- config->masks->eq_sel_shift;
- val &= ~(config->masks->xscale_sel_mask <<
- config->masks->xscale_sel_shift);
- val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
- config->masks->xscale_sel_shift;
- val &= ~(config->masks->yscale_sel_mask <<
- config->masks->yscale_sel_shift);
- val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
- config->masks->yscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / ((1 << (tbls[index].nscale + 1)) *
- (tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
- struct gpt_clk_config *config = clk->private_data;
- unsigned int div = 1, val;
-
- val = readl(config->synth_reg);
- div += (val >> config->masks->mscale_sel_shift) &
- config->masks->mscale_sel_mask;
- div *= 1 << (((val >> config->masks->nscale_sel_shift) &
- config->masks->nscale_sel_mask) + 1);
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
- struct gpt_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
- config->masks->mscale_sel_shift);
- val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
- config->masks->mscale_sel_shift;
- val &= ~(config->masks->nscale_sel_mask <<
- config->masks->nscale_sel_shift);
- val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
- config->masks->nscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
- rate /= 1000;
- rate <<= 12;
- rate /= (2 * tbls[index].div);
- rate >>= 12;
- rate *= 1000;
-
- return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
- struct clcd_clk_config *config = clk->private_data;
- unsigned int div = 1;
- unsigned long prate;
- unsigned int val;
-
- val = readl(config->synth_reg);
- div = (val >> config->masks->div_factor_shift) &
- config->masks->div_factor_mask;
-
- if (!div)
- return -EINVAL;
-
- prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
- clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
- clk->rate *= 1000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
- struct clcd_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
- config->masks->div_factor_shift);
- val |= (tbls[i].div & config->masks->div_factor_mask) <<
- config->masks->div_factor_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
- unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
- clk->rate = clk->pclk->rate/div_factor;
- return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
- struct clk *pclk;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_for_each_entry(pclk, &root_clks, sibling) {
- if (pclk->recalc) {
- ret = pclk->recalc(pclk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default clock.
- */
- if (ret && pclk->set_rate)
- pclk->set_rate(pclk, 0);
- }
- propagate_rate(pclk, 1);
- /* Enable clks enabled on init, in software view */
- if (pclk->flags & ENABLED_ON_INIT)
- do_clk_enable(pclk);
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
- recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->pclk;
- char s[255];
- char *p = s;
-
- if (c) {
- if (c->cl->con_id)
- p += sprintf(p, "%s", c->cl->con_id);
- if (c->cl->dev_id)
- p += sprintf(p, "%s", c->cl->dev_id);
- }
- d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
- (u32 *)&c->usage_count);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->pclk;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
- debugfs_remove(c->dent);
- return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062baf..0000000
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
-#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
-#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
- int (*enable) (struct clk *);
- void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
- struct clk *pclk;
- u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
- struct pclk_info *pclk_info;
- u8 pclk_count;
- void __iomem *pclk_sel_reg;
- unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
- void *tbls;
- u8 count;
- u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
- unsigned int usage_count;
- unsigned int flags;
- unsigned long rate;
- void __iomem *en_reg;
- u8 en_reg_bit;
- const struct clkops *ops;
- int (*recalc) (struct clk *);
- int (*set_rate) (struct clk *, unsigned long rate);
- unsigned long (*calc_rate)(struct clk *, int index);
- struct rate_config rate_config;
- unsigned int div_factor;
-
- struct clk *pclk;
- struct pclk_sel *pclk_sel;
- unsigned int pclk_sel_shift;
-
- struct list_head children;
- struct list_head sibling;
- void *private_data;
-#ifdef CONFIG_DEBUG_FS
- struct list_head node;
- struct clk_lookup *cl;
- struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
- u32 mode_mask;
- u32 mode_shift;
-
- u32 norm_fdbk_m_mask;
- u32 norm_fdbk_m_shift;
- u32 dith_fdbk_m_mask;
- u32 dith_fdbk_m_shift;
- u32 div_p_mask;
- u32 div_p_shift;
- u32 div_n_mask;
- u32 div_n_shift;
-};
-
-struct pll_clk_config {
- void __iomem *mode_reg;
- void __iomem *cfg_reg;
- struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
- u8 mode;
- u16 m;
- u8 n;
- u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
- u32 mask;
- u32 shift;
-};
-
-struct bus_clk_config {
- void __iomem *reg;
- struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
- u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
- u32 eq_sel_mask;
- u32 eq_sel_shift;
- u32 eq1_mask;
- u32 eq2_mask;
- u32 xscale_sel_mask;
- u32 xscale_sel_shift;
- u32 yscale_sel_mask;
- u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
- void __iomem *synth_reg;
- struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
- u16 xscale;
- u16 yscale;
- u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
- u32 mscale_sel_mask;
- u32 mscale_sel_shift;
- u32 nscale_sel_mask;
- u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
- void __iomem *synth_reg;
- struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
- u16 mscale;
- u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
- u32 div_factor_mask;
- u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
- void __iomem *synth_reg;
- struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
- u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index abb5bde..1c94989 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -219,10 +219,10 @@
goto err_iomap;
}
- ret = clk_enable(gpt_clk);
+ ret = clk_prepare_enable(gpt_clk);
if (ret < 0) {
- pr_err("%s:couldn't enable gpt clock\n", __func__);
- goto err_clk;
+ pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+ goto err_prepare_enable_clk;
}
spear_clockevent_init();
@@ -230,7 +230,7 @@
return;
-err_clk:
+err_prepare_enable_clk:
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h
index 0ab82cc..d2bf1fd 100644
--- a/arch/ia64/include/asm/futex.h
+++ b/arch/ia64/include/asm/futex.h
@@ -106,15 +106,16 @@
return -EFAULT;
{
- register unsigned long r8 __asm ("r8") = 0;
+ register unsigned long r8 __asm ("r8");
unsigned long prev;
__asm__ __volatile__(
" mf;; \n"
- " mov ar.ccv=%3;; \n"
- "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n"
+ " mov %0=r0 \n"
+ " mov ar.ccv=%4;; \n"
+ "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n"
" .xdata4 \"__ex_table\", 1b-., 2f-. \n"
"[2:]"
- : "=r" (prev)
+ : "=r" (r8), "=r" (prev)
: "r" (uaddr), "r" (newval),
"rO" ((long) (unsigned) oldval)
: "memory");
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 9d0fd7d..f00ba02 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -604,12 +604,6 @@
spin_unlock(&(x)->ctx_lock);
}
-static inline unsigned int
-pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct)
-{
- return do_munmap(mm, addr, len);
-}
-
static inline unsigned long
pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec)
{
@@ -1458,8 +1452,9 @@
* a PROTECT_CTX() section.
*/
static int
-pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size)
+pfm_remove_smpl_mapping(void *vaddr, unsigned long size)
{
+ struct task_struct *task = current;
int r;
/* sanity checks */
@@ -1473,13 +1468,8 @@
/*
* does the actual unmapping
*/
- down_write(&task->mm->mmap_sem);
+ r = vm_munmap((unsigned long)vaddr, size);
- DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size));
-
- r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0);
-
- up_write(&task->mm->mmap_sem);
if (r !=0) {
printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size);
}
@@ -1945,7 +1935,7 @@
* because some VM function reenables interrupts.
*
*/
- if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size);
+ if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size);
return 0;
}
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
index 33c32ae..a1230e8 100644
--- a/arch/m68k/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -49,7 +49,6 @@
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC=y
-CONFIG_FEC2=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c
index 7ed848c..f91a532 100644
--- a/arch/m68k/platform/527x/config.c
+++ b/arch/m68k/platform/527x/config.c
@@ -74,9 +74,7 @@
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-#endif
-#ifdef CONFIG_FEC2
/* Set multi-function pins to ethernet mode for fec1 */
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xa0, MCF_IPSBAR + 0x100082);
diff --git a/arch/m68k/platform/68EZ328/Makefile b/arch/m68k/platform/68EZ328/Makefile
index ee97735..b44d799 100644
--- a/arch/m68k/platform/68EZ328/Makefile
+++ b/arch/m68k/platform/68EZ328/Makefile
@@ -3,9 +3,3 @@
#
obj-y := config.o
-
-extra-y := bootlogo.rh
-
-$(obj)/bootlogo.rh: $(src)/bootlogo.h
- perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \
- > $(obj)/bootlogo.rh
diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile
index 447ffa0..a49d75e 100644
--- a/arch/m68k/platform/68VZ328/Makefile
+++ b/arch/m68k/platform/68VZ328/Makefile
@@ -3,14 +3,9 @@
#
obj-y := config.o
-logo-$(UCDIMM) := bootlogo.rh
-logo-$(DRAGEN2) := screen.h
-extra-y := $(logo-y)
-
-$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
- perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh
+extra-$(DRAGEN2):= screen.h
$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
-clean-files := $(obj)/screen.h $(obj)/bootlogo.rh
+clean-files := $(obj)/screen.h
diff --git a/arch/m68k/platform/68EZ328/bootlogo.h b/arch/m68k/platform/68VZ328/bootlogo.h
similarity index 99%
rename from arch/m68k/platform/68EZ328/bootlogo.h
rename to arch/m68k/platform/68VZ328/bootlogo.h
index e842bda..b38e2b2 100644
--- a/arch/m68k/platform/68EZ328/bootlogo.h
+++ b/arch/m68k/platform/68VZ328/bootlogo.h
@@ -1,6 +1,6 @@
#define splash_width 640
#define splash_height 480
-static unsigned char splash_bits[] = {
+unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index fa50c48..7af9736 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -114,7 +114,7 @@
static struct platform_device mcf_fec1 = {
.name = "fec",
- .id = 0,
+ .id = 1,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
};
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2b7c0fb..9015060 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -90,7 +90,6 @@
select HAVE_KERNEL_XZ
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
- select HAVE_RCU_TABLE_FREE if SMP
select ARCH_SAVE_PAGE_KEYS if HIBERNATION
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 6cf8e26..1957a9d 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,8 +1,12 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
-CONFIG_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
@@ -14,16 +18,22 @@
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -34,18 +44,15 @@
CONFIG_BINFMT_MISC=m
CONFIG_CMM=m
CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PM=y
+CONFIG_CRASH_DUMP=y
CONFIG_HIBERNATION=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
-CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
-CONFIG_NET_SCTPPROBE=m
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_VLAN_8021Q=y
@@ -84,15 +91,14 @@
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ZFCP=y
-CONFIG_ZFCP_DIF=y
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
CONFIG_BONDING=m
+CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
CONFIG_VIRTIO_NET=y
CONFIG_RAW_DRIVER=m
+CONFIG_VIRTIO_BALLOON=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -103,27 +109,21 @@
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_IBM_PARTITION=y
-CONFIG_DLM=m
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_NOTIFIERS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_TRACE=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
-# CONFIG_FTRACE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
@@ -173,4 +173,3 @@
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRC7=m
-CONFIG_VIRTIO_BALLOON=y
diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h
index 1e5b27e..2ee66a6 100644
--- a/arch/s390/include/asm/facility.h
+++ b/arch/s390/include/asm/facility.h
@@ -38,12 +38,11 @@
unsigned long nr;
preempt_disable();
- S390_lowcore.stfl_fac_list = 0;
asm volatile(
" .insn s,0xb2b10000,0(0)\n" /* stfl */
"0:\n"
EX_TABLE(0b, 0b)
- : "=m" (S390_lowcore.stfl_fac_list));
+ : "+m" (S390_lowcore.stfl_fac_list));
nr = 4; /* bytes stored by stfl */
memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4);
if (S390_lowcore.stfl_fac_list & 0x01000000) {
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 8eef9b5..78e3041 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -22,10 +22,7 @@
unsigned long *page_table_alloc(struct mm_struct *, unsigned long);
void page_table_free(struct mm_struct *, unsigned long *);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
void page_table_free_rcu(struct mmu_gather *, unsigned long *);
-void __tlb_remove_table(void *_table);
-#endif
static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
{
diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h
index 6bdee21..a3e4ebb 100644
--- a/arch/s390/include/asm/swab.h
+++ b/arch/s390/include/asm/swab.h
@@ -77,7 +77,7 @@
asm volatile(
#ifndef __s390x__
- " icm %0,2,%O+1(%R1)\n"
+ " icm %0,2,%O1+1(%R1)\n"
" ic %0,%1\n"
: "=&d" (result) : "Q" (*x) : "cc");
#else /* __s390x__ */
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index c687a2c..775a5ee 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -30,14 +30,10 @@
struct mmu_gather {
struct mm_struct *mm;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
-#endif
unsigned int fullmm;
- unsigned int need_flush;
};
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch {
struct rcu_head rcu;
unsigned int nr;
@@ -49,7 +45,6 @@
extern void tlb_table_flush(struct mmu_gather *tlb);
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
-#endif
static inline void tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm,
@@ -57,29 +52,20 @@
{
tlb->mm = mm;
tlb->fullmm = full_mm_flush;
- tlb->need_flush = 0;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb->batch = NULL;
-#endif
if (tlb->fullmm)
__tlb_flush_mm(mm);
}
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
- if (!tlb->need_flush)
- return;
- tlb->need_flush = 0;
- __tlb_flush_mm(tlb->mm);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb_table_flush(tlb);
-#endif
}
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
- tlb_flush_mmu(tlb);
+ tlb_table_flush(tlb);
}
/*
@@ -105,10 +91,8 @@
static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long address)
{
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return page_table_free_rcu(tlb, (unsigned long *) pte);
-#endif
page_table_free(tlb->mm, (unsigned long *) pte);
}
@@ -125,10 +109,8 @@
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pmd);
-#endif
crst_table_free(tlb->mm, (unsigned long *) pmd);
#endif
}
@@ -146,10 +128,8 @@
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pud);
-#endif
crst_table_free(tlb->mm, (unsigned long *) pud);
#endif
}
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index c27a072..adccd90 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -474,9 +474,9 @@
stck __LC_LAST_UPDATE_CLOCK
spt 5f-.LPG0(%r13)
mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13)
+ xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
#ifndef CONFIG_MARCH_G5
# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
- xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
.insn s,0xb2b10000,__LC_STFL_FAC_LIST # store facility list
tm __LC_STFL_FAC_LIST,0x01 # stfle available ?
jz 0f
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 1c2cdd5..8a22c27 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -118,9 +118,10 @@
"a" (__do_softirq)
: "0", "1", "2", "3", "4", "5", "14",
"cc", "memory" );
- } else
+ } else {
/* We are already on the async stack. */
__do_softirq();
+ }
}
local_irq_restore(flags);
@@ -192,11 +193,12 @@
int index = ext_hash(code);
spin_lock_irqsave(&ext_int_hash_lock, flags);
- list_for_each_entry_rcu(p, &ext_int_hash[index], entry)
+ list_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
if (p->code == code && p->handler == handler) {
list_del_rcu(&p->entry);
kfree_rcu(p, rcu);
}
+ }
spin_unlock_irqrestore(&ext_int_hash_lock, flags);
return 0;
}
@@ -211,9 +213,10 @@
old_regs = set_irq_regs(regs);
irq_enter();
- if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+ if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) {
/* Serve timer interrupts first. */
clock_comparator_work();
+ }
kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
if (ext_code.code != 0x1004)
__get_cpu_var(s390_idle).nohz_delay = 1;
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 4640508..cb019f4 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -178,7 +178,7 @@
err = lcctl(cpuhw->state);
if (err) {
pr_err("Enabling the performance measuring unit "
- "failed with rc=%lx\n", err);
+ "failed with rc=%x\n", err);
return;
}
@@ -203,7 +203,7 @@
err = lcctl(inactive);
if (err) {
pr_err("Disabling the performance measuring unit "
- "failed with rc=%lx\n", err);
+ "failed with rc=%x\n", err);
return;
}
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 7bb15fc..e1335dc 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -61,21 +61,14 @@
return copied < 0 ? -EFAULT : 0;
}
-/*
- * Copy memory in real mode (kernel to kernel)
- */
-int memcpy_real(void *dest, void *src, size_t count)
+static int __memcpy_real(void *dest, void *src, size_t count)
{
register unsigned long _dest asm("2") = (unsigned long) dest;
register unsigned long _len1 asm("3") = (unsigned long) count;
register unsigned long _src asm("4") = (unsigned long) src;
register unsigned long _len2 asm("5") = (unsigned long) count;
- unsigned long flags;
int rc = -EFAULT;
- if (!count)
- return 0;
- flags = __arch_local_irq_stnsm(0xf8UL);
asm volatile (
"0: mvcle %1,%2,0x0\n"
"1: jo 0b\n"
@@ -86,7 +79,23 @@
"+d" (_len2), "=m" (*((long *) dest))
: "m" (*((long *) src))
: "cc", "memory");
- arch_local_irq_restore(flags);
+ return rc;
+}
+
+/*
+ * Copy memory in real mode (kernel to kernel)
+ */
+int memcpy_real(void *dest, void *src, size_t count)
+{
+ unsigned long flags;
+ int rc;
+
+ if (!count)
+ return 0;
+ local_irq_save(flags);
+ __arch_local_irq_stnsm(0xfbUL);
+ rc = __memcpy_real(dest, src, count);
+ local_irq_restore(flags);
return rc;
}
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 373adf6..6e765bf 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -678,8 +678,6 @@
}
}
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-
static void __page_table_free_rcu(void *table, unsigned bit)
{
struct page *page;
@@ -733,7 +731,66 @@
free_pages((unsigned long) table, ALLOC_ORDER);
}
-#endif
+static void tlb_remove_table_smp_sync(void *arg)
+{
+ /* Simply deliver the interrupt */
+}
+
+static void tlb_remove_table_one(void *table)
+{
+ /*
+ * This isn't an RCU grace period and hence the page-tables cannot be
+ * assumed to be actually RCU-freed.
+ *
+ * It is however sufficient for software page-table walkers that rely
+ * on IRQ disabling. See the comment near struct mmu_table_batch.
+ */
+ smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+ __tlb_remove_table(table);
+}
+
+static void tlb_remove_table_rcu(struct rcu_head *head)
+{
+ struct mmu_table_batch *batch;
+ int i;
+
+ batch = container_of(head, struct mmu_table_batch, rcu);
+
+ for (i = 0; i < batch->nr; i++)
+ __tlb_remove_table(batch->tables[i]);
+
+ free_page((unsigned long)batch);
+}
+
+void tlb_table_flush(struct mmu_gather *tlb)
+{
+ struct mmu_table_batch **batch = &tlb->batch;
+
+ if (*batch) {
+ __tlb_flush_mm(tlb->mm);
+ call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
+ *batch = NULL;
+ }
+}
+
+void tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+ struct mmu_table_batch **batch = &tlb->batch;
+
+ if (*batch == NULL) {
+ *batch = (struct mmu_table_batch *)
+ __get_free_page(GFP_NOWAIT | __GFP_NOWARN);
+ if (*batch == NULL) {
+ __tlb_flush_mm(tlb->mm);
+ tlb_remove_table_one(table);
+ return;
+ }
+ (*batch)->nr = 0;
+ }
+ (*batch)->tables[(*batch)->nr++] = table;
+ if ((*batch)->nr == MAX_TABLE_BATCH)
+ tlb_table_flush(tlb);
+}
/*
* switch on pgstes for its userspace process (for kvm)
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 1210fde..160cac9 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -23,6 +23,7 @@
#include <linux/pm.h>
#include <linux/delay.h>
#include <linux/gfp.h>
+#include <linux/cpu.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
@@ -78,6 +79,8 @@
local_flush_tlb_all();
leon_configure_cache_smp();
+ notify_cpu_starting(cpuid);
+
/* Get our local ticker going. */
smp_setup_percpu_timer();
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 232df99..3ee51f1 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -566,15 +566,10 @@
SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
{
- long ret;
-
if (invalid_64bit_range(addr, len))
return -EINVAL;
- down_write(¤t->mm->mmap_sem);
- ret = do_munmap(current->mm, addr, len);
- up_write(¤t->mm->mmap_sem);
- return ret;
+ return vm_munmap(addr, len);
}
extern unsigned long do_mremap(unsigned long addr,
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 9efbc13..89529c9 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -346,12 +346,10 @@
}
/* allocate a cache line of writable, executable memory */
- down_write(¤t->mm->mmap_sem);
- buffer = (void __user *) do_mmap(NULL, 0, 64,
+ buffer = (void __user *) vm_mmap(NULL, 0, 64,
PROT_EXEC | PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS,
0);
- up_write(¤t->mm->mmap_sem);
if (IS_ERR((void __force *)buffer)) {
kfree(state);
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index d511d95..4824fb4 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -119,9 +119,7 @@
end = PAGE_ALIGN(end);
if (end <= start)
return;
- down_write(¤t->mm->mmap_sem);
- do_brk(start, end - start);
- up_write(¤t->mm->mmap_sem);
+ vm_brk(start, end - start);
}
#ifdef CORE_DUMP
@@ -332,9 +330,7 @@
pos = 32;
map_size = ex.a_text+ex.a_data;
- down_write(¤t->mm->mmap_sem);
- error = do_brk(text_addr & PAGE_MASK, map_size);
- up_write(¤t->mm->mmap_sem);
+ error = vm_brk(text_addr & PAGE_MASK, map_size);
if (error != (text_addr & PAGE_MASK)) {
send_sig(SIGKILL, current, 0);
@@ -373,9 +369,7 @@
if (!bprm->file->f_op->mmap || (fd_offset & ~PAGE_MASK) != 0) {
loff_t pos = fd_offset;
- down_write(¤t->mm->mmap_sem);
- do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
- up_write(¤t->mm->mmap_sem);
+ vm_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
bprm->file->f_op->read(bprm->file,
(char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
@@ -385,26 +379,22 @@
goto beyond_if;
}
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
+ error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
MAP_EXECUTABLE | MAP_32BIT,
fd_offset);
- up_write(¤t->mm->mmap_sem);
if (error != N_TXTADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
+ error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
MAP_EXECUTABLE | MAP_32BIT,
fd_offset + ex.a_text);
- up_write(¤t->mm->mmap_sem);
if (error != N_DATADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
@@ -476,9 +466,7 @@
error_time = jiffies;
}
#endif
- down_write(¤t->mm->mmap_sem);
- do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
- up_write(¤t->mm->mmap_sem);
+ vm_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
file->f_op->read(file, (char __user *)start_addr,
ex.a_text + ex.a_data, &pos);
@@ -490,12 +478,10 @@
goto out;
}
/* Now use mmap to map the library into memory. */
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(file, start_addr, ex.a_text + ex.a_data,
+ error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_32BIT,
N_TXTOFF(ex));
- up_write(¤t->mm->mmap_sem);
retval = error;
if (error != start_addr)
goto out;
@@ -503,9 +489,7 @@
len = PAGE_ALIGN(ex.a_text + ex.a_data);
bss = ex.a_text + ex.a_data + ex.a_bss;
if (bss > len) {
- down_write(¤t->mm->mmap_sem);
- error = do_brk(start_addr + len, bss - len);
- up_write(¤t->mm->mmap_sem);
+ error = vm_brk(start_addr + len, bss - len);
retval = error;
if (error != start_addr + len)
goto out;
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 173df38..2e88438 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -459,17 +459,17 @@
pmu->available_event_types = ~entry->ebx & ((1ull << bitmap_len) - 1);
if (pmu->version == 1) {
- pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1;
- return;
+ pmu->nr_arch_fixed_counters = 0;
+ } else {
+ pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f),
+ X86_PMC_MAX_FIXED);
+ pmu->counter_bitmask[KVM_PMC_FIXED] =
+ ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1;
}
- pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f),
- X86_PMC_MAX_FIXED);
- pmu->counter_bitmask[KVM_PMC_FIXED] =
- ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1;
- pmu->global_ctrl_mask = ~(((1 << pmu->nr_arch_gp_counters) - 1)
- | (((1ull << pmu->nr_arch_fixed_counters) - 1)
- << X86_PMC_IDX_FIXED));
+ pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
+ (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED);
+ pmu->global_ctrl_mask = ~pmu->global_ctrl;
}
void kvm_pmu_init(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ad85adf..4ff0ab9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2210,9 +2210,12 @@
msr = find_msr_entry(vmx, msr_index);
if (msr) {
msr->data = data;
- if (msr - vmx->guest_msrs < vmx->save_nmsrs)
+ if (msr - vmx->guest_msrs < vmx->save_nmsrs) {
+ preempt_disable();
kvm_set_shared_msr(msr->index, msr->data,
msr->mask);
+ preempt_enable();
+ }
break;
}
ret = kvm_set_msr_common(vcpu, msr_index, data);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4044ce0..91a5e98 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6336,13 +6336,11 @@
if (npages && !old.rmap) {
unsigned long userspace_addr;
- down_write(¤t->mm->mmap_sem);
- userspace_addr = do_mmap(NULL, 0,
+ userspace_addr = vm_mmap(NULL, 0,
npages * PAGE_SIZE,
PROT_READ | PROT_WRITE,
map_flags,
0);
- up_write(¤t->mm->mmap_sem);
if (IS_ERR((void *)userspace_addr))
return PTR_ERR((void *)userspace_addr);
@@ -6366,10 +6364,8 @@
if (!user_alloc && !old.user_alloc && old.rmap && !npages) {
int ret;
- down_write(¤t->mm->mmap_sem);
- ret = do_munmap(current->mm, old.userspace_addr,
+ ret = vm_munmap(old.userspace_addr,
old.npages * PAGE_SIZE);
- up_write(¤t->mm->mmap_sem);
if (ret < 0)
printk(KERN_WARNING
"kvm_vm_ioctl_set_memory_region: "
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 25feb1a..b1e6c4b 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -379,8 +379,8 @@
return;
}
-/* Decode moffset16/32/64 */
-static void __get_moffset(struct insn *insn)
+/* Decode moffset16/32/64. Return 0 if failed */
+static int __get_moffset(struct insn *insn)
{
switch (insn->addr_bytes) {
case 2:
@@ -397,15 +397,19 @@
insn->moffset2.value = get_next(int, insn);
insn->moffset2.nbytes = 4;
break;
+ default: /* opnd_bytes must be modified manually */
+ goto err_out;
}
insn->moffset1.got = insn->moffset2.got = 1;
+ return 1;
+
err_out:
- return;
+ return 0;
}
-/* Decode imm v32(Iz) */
-static void __get_immv32(struct insn *insn)
+/* Decode imm v32(Iz). Return 0 if failed */
+static int __get_immv32(struct insn *insn)
{
switch (insn->opnd_bytes) {
case 2:
@@ -417,14 +421,18 @@
insn->immediate.value = get_next(int, insn);
insn->immediate.nbytes = 4;
break;
+ default: /* opnd_bytes must be modified manually */
+ goto err_out;
}
+ return 1;
+
err_out:
- return;
+ return 0;
}
-/* Decode imm v64(Iv/Ov) */
-static void __get_immv(struct insn *insn)
+/* Decode imm v64(Iv/Ov), Return 0 if failed */
+static int __get_immv(struct insn *insn)
{
switch (insn->opnd_bytes) {
case 2:
@@ -441,15 +449,18 @@
insn->immediate2.value = get_next(int, insn);
insn->immediate2.nbytes = 4;
break;
+ default: /* opnd_bytes must be modified manually */
+ goto err_out;
}
insn->immediate1.got = insn->immediate2.got = 1;
+ return 1;
err_out:
- return;
+ return 0;
}
/* Decode ptr16:16/32(Ap) */
-static void __get_immptr(struct insn *insn)
+static int __get_immptr(struct insn *insn)
{
switch (insn->opnd_bytes) {
case 2:
@@ -462,14 +473,17 @@
break;
case 8:
/* ptr16:64 is not exist (no segment) */
- return;
+ return 0;
+ default: /* opnd_bytes must be modified manually */
+ goto err_out;
}
insn->immediate2.value = get_next(unsigned short, insn);
insn->immediate2.nbytes = 2;
insn->immediate1.got = insn->immediate2.got = 1;
+ return 1;
err_out:
- return;
+ return 0;
}
/**
@@ -489,7 +503,8 @@
insn_get_displacement(insn);
if (inat_has_moffset(insn->attr)) {
- __get_moffset(insn);
+ if (!__get_moffset(insn))
+ goto err_out;
goto done;
}
@@ -517,16 +532,20 @@
insn->immediate2.nbytes = 4;
break;
case INAT_IMM_PTR:
- __get_immptr(insn);
+ if (!__get_immptr(insn))
+ goto err_out;
break;
case INAT_IMM_VWORD32:
- __get_immv32(insn);
+ if (!__get_immv32(insn))
+ goto err_out;
break;
case INAT_IMM_VWORD:
- __get_immv(insn);
+ if (!__get_immv(insn))
+ goto err_out;
break;
default:
- break;
+ /* Here, insn must have an immediate, but failed */
+ goto err_out;
}
if (inat_has_second_immediate(insn->attr)) {
insn->immediate2.value = get_next(char, insn);
diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c
index 107f6f7..dd30f40 100644
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -174,7 +174,7 @@
index = sctx->count[0] & 0x7f;
/* Update number of bytes */
- if (!(sctx->count[0] += len))
+ if ((sctx->count[0] += len) < len)
sctx->count[1]++;
part_len = 128 - index;
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index ab513a9..a716fed 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -74,7 +74,8 @@
/* Check if the reset register is supported */
- if (!reset_reg->address) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ !reset_reg->address) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index ba14fb9..c3881b2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -607,8 +607,7 @@
acpi_irq_handler = handler;
acpi_irq_context = context;
- if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi",
- acpi_irq)) {
+ if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
acpi_irq_handler = NULL;
return AE_NOT_ACQUIRED;
diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index c1d6124..a6c77e8b 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -23,7 +23,8 @@
/* Is the reset register supported? The spec says we should be
* checking the bit width and bit offset, but Windows ignores
* these fields */
- /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
+ return;
reset_value = acpi_gbl_FADT.reset_value;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 68013f9..7857e8f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -329,6 +329,8 @@
{ 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (DH89xxCC) */
+ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e0bda9f..28db50b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -95,7 +95,7 @@
static void ata_dev_xfermask(struct ata_device *dev);
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
-unsigned int ata_print_id = 1;
+atomic_t ata_print_id = ATOMIC_INIT(1);
struct ata_force_param {
const char *name;
@@ -6029,7 +6029,7 @@
/* give ports names and add SCSI hosts */
for (i = 0; i < host->n_ports; i++)
- host->ports[i]->print_id = ata_print_id++;
+ host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
/* Create associated sysfs transport objects */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1ee00c8..93dabdc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3843,7 +3843,7 @@
int rc = ap->ops->port_start(ap);
if (!rc) {
- ap->print_id = ata_print_id++;
+ ap->print_id = atomic_inc_return(&ata_print_id);
__ata_port_probe(ap);
}
@@ -3867,7 +3867,7 @@
int rc = ap->ops->port_start(ap);
if (!rc) {
- ap->print_id = ata_print_id++;
+ ap->print_id = atomic_inc_return(&ata_print_id);
rc = ata_port_probe(ap);
}
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 74aaee3..c341904 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -294,6 +294,7 @@
device_enable_async_suspend(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ pm_runtime_forbid(dev);
transport_add_device(dev);
transport_configure_device(dev);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 2e26fca..9d0fd0b 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -53,7 +53,7 @@
ATA_DNXFER_QUIET = (1 << 31),
};
-extern unsigned int ata_print_id;
+extern atomic_t ata_print_id;
extern int atapi_passthru16;
extern int libata_fua;
extern int libata_noacpi;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 38950ea..7336d4a 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4025,7 +4025,8 @@
struct ata_host *host;
struct mv_host_priv *hpriv;
struct resource *res;
- int n_ports, rc;
+ int n_ports = 0;
+ int rc;
ata_print_version_once(&pdev->dev, DRV_VERSION);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 0e4ef3d..0d39f2f 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -375,6 +375,34 @@
return err;
}
+/*
+ * Legacy naming scheme used for virtio devices. We are stuck with it for
+ * virtio blk but don't ever use it for any new driver.
+ */
+static int virtblk_name_format(char *prefix, int index, char *buf, int buflen)
+{
+ const int base = 'z' - 'a' + 1;
+ char *begin = buf + strlen(prefix);
+ char *end = buf + buflen;
+ char *p;
+ int unit;
+
+ p = end - 1;
+ *p = '\0';
+ unit = base;
+ do {
+ if (p == begin)
+ return -EINVAL;
+ *--p = 'a' + (index % unit);
+ index = (index / unit) - 1;
+ } while (index >= 0);
+
+ memmove(begin, p, end - p);
+ memcpy(buf, prefix, strlen(prefix));
+
+ return 0;
+}
+
static int __devinit virtblk_probe(struct virtio_device *vdev)
{
struct virtio_blk *vblk;
@@ -443,18 +471,7 @@
q->queuedata = vblk;
- if (index < 26) {
- sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
- } else if (index < (26 + 1) * 26) {
- sprintf(vblk->disk->disk_name, "vd%c%c",
- 'a' + index / 26 - 1, 'a' + index % 26);
- } else {
- const unsigned int m1 = (index / 26 - 1) / 26 - 1;
- const unsigned int m2 = (index / 26 - 1) % 26;
- const unsigned int m3 = index % 26;
- sprintf(vblk->disk->disk_name, "vd%c%c%c",
- 'a' + m1, 'a' + m2, 'a' + m3);
- }
+ virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN);
vblk->disk->major = major;
vblk->disk->first_minor = index_to_minor(index);
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 89860f3..4f66171 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -416,7 +416,7 @@
"discard-secure", "%d",
blkif->vbd.discard_secure);
if (err) {
- dev_warn(dev-dev, "writing discard-secure (%d)", err);
+ dev_warn(&dev->dev, "writing discard-secure (%d)", err);
return;
}
}
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 165e1fe..4864407 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -12,6 +12,7 @@
config COMMON_CLK
bool
select HAVE_CLK_PREPARE
+ select CLKDEV_LOOKUP
---help---
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
@@ -22,17 +23,6 @@
menu "Common Clock Framework"
depends on COMMON_CLK
-config COMMON_CLK_DISABLE_UNUSED
- bool "Disabled unused clocks at boot"
- depends on COMMON_CLK
- ---help---
- Traverses the entire clock tree and disables any clocks that are
- enabled in hardware but have not been enabled by any device drivers.
- This saves power and keeps the software model of the clock in line
- with reality.
-
- If in doubt, say "N".
-
config COMMON_CLK_DEBUG
bool "DebugFS representation of clock tree"
depends on COMMON_CLK
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1f736bc..0f5e03d 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,4 +1,7 @@
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
- clk-mux.o clk-divider.o
+ clk-mux.o clk-divider.o clk-fixed-factor.o
+
+# SoCs specific
+obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index d5ac6a7..8ea11b44 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -45,7 +45,6 @@
return parent_rate / div;
}
-EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
/*
* The reverse of DIV_ROUND_UP: The maximum number which
@@ -68,8 +67,8 @@
if (divider->flags & CLK_DIVIDER_ONE_BASED)
maxdiv--;
- if (!best_parent_rate) {
- parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+ if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+ parent_rate = *best_parent_rate;
bestdiv = DIV_ROUND_UP(parent_rate, rate);
bestdiv = bestdiv == 0 ? 1 : bestdiv;
bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
@@ -109,24 +108,18 @@
int div;
div = clk_divider_bestdiv(hw, rate, prate);
- if (prate)
- return *prate / div;
- else {
- unsigned long r;
- r = __clk_get_rate(__clk_get_parent(hw->clk));
- return r / div;
- }
+ return *prate / div;
}
-EXPORT_SYMBOL_GPL(clk_divider_round_rate);
-static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
struct clk_divider *divider = to_clk_divider(hw);
unsigned int div;
unsigned long flags = 0;
u32 val;
- div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+ div = parent_rate / rate;
if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
div--;
@@ -147,15 +140,26 @@
return 0;
}
-EXPORT_SYMBOL_GPL(clk_divider_set_rate);
-struct clk_ops clk_divider_ops = {
+const struct clk_ops clk_divider_ops = {
.recalc_rate = clk_divider_recalc_rate,
.round_rate = clk_divider_round_rate,
.set_rate = clk_divider_set_rate,
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -163,38 +167,34 @@
{
struct clk_divider *div;
struct clk *clk;
+ struct clk_init_data init;
+ /* allocate the divider */
div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-
if (!div) {
pr_err("%s: could not allocate divider clk\n", __func__);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_divider_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_divider assignments */
div->reg = reg;
div->shift = shift;
div->width = width;
div->flags = clk_divider_flags;
div->lock = lock;
+ div->hw.init = &init;
- if (parent_name) {
- div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
- if (!div->parent[0])
- goto out;
- }
+ /* register the clock */
+ clk = clk_register(dev, &div->hw);
- clk = clk_register(dev, name,
- &clk_divider_ops, &div->hw,
- div->parent,
- (parent_name ? 1 : 0),
- flags);
- if (clk)
- return clk;
+ if (IS_ERR(clk))
+ kfree(div);
-out:
- kfree(div->parent[0]);
- kfree(div);
-
- return NULL;
+ return clk;
}
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
new file mode 100644
index 0000000..c8c003e
--- /dev/null
+++ b/drivers/clk/clk-fixed-factor.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Standard functionality for the common clock API.
+ */
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed multiplier and divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is fixed. clk->rate = parent->rate / div * mult
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+ return parent_rate * fix->mult / fix->div;
+}
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+ unsigned long best_parent;
+
+ best_parent = (rate / fix->mult) * fix->div;
+ *prate = __clk_round_rate(__clk_get_parent(hw->clk),
+ best_parent);
+ }
+
+ return (*prate / fix->div) * fix->mult;
+}
+
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+struct clk_ops clk_fixed_factor_ops = {
+ .round_rate = clk_factor_round_rate,
+ .set_rate = clk_factor_set_rate,
+ .recalc_rate = clk_factor_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div)
+{
+ struct clk_fixed_factor *fix;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ fix = kmalloc(sizeof(*fix), GFP_KERNEL);
+ if (!fix) {
+ pr_err("%s: could not allocate fixed factor clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_fixed_factor assignments */
+ fix->mult = mult;
+ fix->div = div;
+ fix->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_fixed_factor_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(dev, &fix->hw);
+
+ if (IS_ERR(clk))
+ kfree(fix);
+
+ return clk;
+}
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 90c79fb..cbd2462 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -32,51 +32,50 @@
{
return to_clk_fixed_rate(hw)->fixed_rate;
}
-EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
-struct clk_ops clk_fixed_rate_ops = {
+const struct clk_ops clk_fixed_rate_ops = {
.recalc_rate = clk_fixed_rate_recalc_rate,
};
EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned long fixed_rate)
{
struct clk_fixed_rate *fixed;
- char **parent_names = NULL;
- u8 len;
+ struct clk *clk;
+ struct clk_init_data init;
+ /* allocate fixed-rate clock */
fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
-
if (!fixed) {
pr_err("%s: could not allocate fixed clk\n", __func__);
return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_fixed_rate_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_fixed_rate assignments */
fixed->fixed_rate = fixed_rate;
+ fixed->hw.init = &init;
- if (parent_name) {
- parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
+ /* register the clock */
+ clk = clk_register(dev, &fixed->hw);
- if (! parent_names)
- goto out;
+ if (IS_ERR(clk))
+ kfree(fixed);
- len = sizeof(char) * strlen(parent_name);
-
- parent_names[0] = kmalloc(len, GFP_KERNEL);
-
- if (!parent_names[0])
- goto out;
-
- strncpy(parent_names[0], parent_name, len);
- }
-
-out:
- return clk_register(dev, name,
- &clk_fixed_rate_ops, &fixed->hw,
- parent_names,
- (parent_name ? 1 : 0),
- flags);
+ return clk;
}
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index b5902e2..578465e 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -28,32 +28,38 @@
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
-static void clk_gate_set_bit(struct clk_gate *gate)
+/*
+ * It works on following logic:
+ *
+ * For enabling clock, enable = 1
+ * set2dis = 1 -> clear bit -> set = 0
+ * set2dis = 0 -> set bit -> set = 1
+ *
+ * For disabling clock, enable = 0
+ * set2dis = 1 -> set bit -> set = 1
+ * set2dis = 0 -> clear bit -> set = 0
+ *
+ * So, result is always: enable xor set2dis.
+ */
+static void clk_gate_endisable(struct clk_hw *hw, int enable)
{
- u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+ int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
unsigned long flags = 0;
+ u32 reg;
+
+ set ^= enable;
if (gate->lock)
spin_lock_irqsave(gate->lock, flags);
reg = readl(gate->reg);
- reg |= BIT(gate->bit_idx);
- writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
-}
+ if (set)
+ reg |= BIT(gate->bit_idx);
+ else
+ reg &= ~BIT(gate->bit_idx);
-static void clk_gate_clear_bit(struct clk_gate *gate)
-{
- u32 reg;
- unsigned long flags = 0;
-
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
-
- reg = readl(gate->reg);
- reg &= ~BIT(gate->bit_idx);
writel(reg, gate->reg);
if (gate->lock)
@@ -62,27 +68,15 @@
static int clk_gate_enable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
-
- if (gate->flags & CLK_GATE_SET_TO_DISABLE)
- clk_gate_clear_bit(gate);
- else
- clk_gate_set_bit(gate);
+ clk_gate_endisable(hw, 1);
return 0;
}
-EXPORT_SYMBOL_GPL(clk_gate_enable);
static void clk_gate_disable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
-
- if (gate->flags & CLK_GATE_SET_TO_DISABLE)
- clk_gate_set_bit(gate);
- else
- clk_gate_clear_bit(gate);
+ clk_gate_endisable(hw, 0);
}
-EXPORT_SYMBOL_GPL(clk_gate_disable);
static int clk_gate_is_enabled(struct clk_hw *hw)
{
@@ -99,15 +93,25 @@
return reg ? 1 : 0;
}
-EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
-struct clk_ops clk_gate_ops = {
+const struct clk_ops clk_gate_ops = {
.enable = clk_gate_enable,
.disable = clk_gate_disable,
.is_enabled = clk_gate_is_enabled,
};
EXPORT_SYMBOL_GPL(clk_gate_ops);
+/**
+ * clk_register_gate - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of this clock's parent
+ * @flags: framework-specific flags for this clock
+ * @reg: register address to control gating of this clock
+ * @bit_idx: which bit in the register controls gating of this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
struct clk *clk_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
@@ -115,36 +119,32 @@
{
struct clk_gate *gate;
struct clk *clk;
+ struct clk_init_data init;
+ /* allocate the gate */
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-
if (!gate) {
pr_err("%s: could not allocate gated clk\n", __func__);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_gate_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name: NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
/* struct clk_gate assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
gate->flags = clk_gate_flags;
gate->lock = lock;
+ gate->hw.init = &init;
- if (parent_name) {
- gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
- if (!gate->parent[0])
- goto out;
- }
+ clk = clk_register(dev, &gate->hw);
- clk = clk_register(dev, name,
- &clk_gate_ops, &gate->hw,
- gate->parent,
- (parent_name ? 1 : 0),
- flags);
- if (clk)
- return clk;
-out:
- kfree(gate->parent[0]);
- kfree(gate);
+ if (IS_ERR(clk))
+ kfree(gate);
- return NULL;
+ return clk;
}
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c71ad1f..fd36a8e 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -55,7 +55,6 @@
return val;
}
-EXPORT_SYMBOL_GPL(clk_mux_get_parent);
static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
{
@@ -82,35 +81,47 @@
return 0;
}
-EXPORT_SYMBOL_GPL(clk_mux_set_parent);
-struct clk_ops clk_mux_ops = {
+const struct clk_ops clk_mux_ops = {
.get_parent = clk_mux_get_parent,
.set_parent = clk_mux_set_parent,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
struct clk *clk_register_mux(struct device *dev, const char *name,
- char **parent_names, u8 num_parents, unsigned long flags,
+ const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock)
{
struct clk_mux *mux;
+ struct clk *clk;
+ struct clk_init_data init;
- mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL);
-
+ /* allocate the mux */
+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
if (!mux) {
pr_err("%s: could not allocate mux clk\n", __func__);
return ERR_PTR(-ENOMEM);
}
+ init.name = name;
+ init.ops = &clk_mux_ops;
+ init.flags = flags;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
/* struct clk_mux assignments */
mux->reg = reg;
mux->shift = shift;
mux->width = width;
mux->flags = clk_mux_flags;
mux->lock = lock;
+ mux->hw.init = &init;
- return clk_register(dev, name, &clk_mux_ops, &mux->hw,
- parent_names, num_parents, flags);
+ clk = clk_register(dev, &mux->hw);
+
+ if (IS_ERR(clk))
+ kfree(mux);
+
+ return clk;
}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9cf6f59e..e5d5dc1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -194,9 +194,8 @@
late_initcall(clk_debug_init);
#else
static inline int clk_debug_register(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DEBUG */
+#endif
-#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED
/* caller must hold prepare_lock */
static void clk_disable_unused_subtree(struct clk *clk)
{
@@ -246,9 +245,6 @@
return 0;
}
late_initcall(clk_disable_unused);
-#else
-static inline int clk_disable_unused(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */
/*** helper functions ***/
@@ -287,7 +283,7 @@
unsigned long ret;
if (!clk) {
- ret = -EINVAL;
+ ret = 0;
goto out;
}
@@ -297,7 +293,7 @@
goto out;
if (!clk->parent)
- ret = -ENODEV;
+ ret = 0;
out:
return ret;
@@ -562,7 +558,7 @@
* @clk: the clk whose rate is being returned
*
* Simply returns the cached rate of the clk. Does not query the hardware. If
- * clk is NULL then returns -EINVAL.
+ * clk is NULL then returns 0.
*/
unsigned long clk_get_rate(struct clk *clk)
{
@@ -584,18 +580,22 @@
*/
unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
{
- unsigned long unused;
+ unsigned long parent_rate = 0;
if (!clk)
return -EINVAL;
- if (!clk->ops->round_rate)
- return clk->rate;
+ if (!clk->ops->round_rate) {
+ if (clk->flags & CLK_SET_RATE_PARENT)
+ return __clk_round_rate(clk->parent, rate);
+ else
+ return clk->rate;
+ }
- if (clk->flags & CLK_SET_RATE_PARENT)
- return clk->ops->round_rate(clk->hw, rate, &unused);
- else
- return clk->ops->round_rate(clk->hw, rate, NULL);
+ if (clk->parent)
+ parent_rate = clk->parent->rate;
+
+ return clk->ops->round_rate(clk->hw, rate, &parent_rate);
}
/**
@@ -765,25 +765,41 @@
static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
{
struct clk *top = clk;
- unsigned long best_parent_rate = clk->parent->rate;
+ unsigned long best_parent_rate = 0;
unsigned long new_rate;
- if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) {
- clk->new_rate = clk->rate;
+ /* sanity */
+ if (IS_ERR_OR_NULL(clk))
+ return NULL;
+
+ /* save parent rate, if it exists */
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
+ /* never propagate up to the parent */
+ if (!(clk->flags & CLK_SET_RATE_PARENT)) {
+ if (!clk->ops->round_rate) {
+ clk->new_rate = clk->rate;
+ return NULL;
+ }
+ new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
+ goto out;
+ }
+
+ /* need clk->parent from here on out */
+ if (!clk->parent) {
+ pr_debug("%s: %s has NULL parent\n", __func__, clk->name);
return NULL;
}
- if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) {
+ if (!clk->ops->round_rate) {
top = clk_calc_new_rates(clk->parent, rate);
- new_rate = clk->new_rate = clk->parent->new_rate;
+ new_rate = clk->parent->new_rate;
goto out;
}
- if (clk->flags & CLK_SET_RATE_PARENT)
- new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
- else
- new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+ new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
if (best_parent_rate != clk->parent->rate) {
top = clk_calc_new_rates(clk->parent, best_parent_rate);
@@ -839,7 +855,7 @@
old_rate = clk->rate;
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
if (clk->ops->recalc_rate)
clk->rate = clk->ops->recalc_rate(clk->hw,
@@ -859,38 +875,19 @@
* @clk: the clk whose rate is being changed
* @rate: the new rate for clk
*
- * In the simplest case clk_set_rate will only change the rate of clk.
+ * In the simplest case clk_set_rate will only adjust the rate of clk.
*
- * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call
- * will fail; only when the clk is disabled will it be able to change
- * its rate.
+ * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to
+ * propagate up to clk's parent; whether or not this happens depends on the
+ * outcome of clk's .round_rate implementation. If *parent_rate is unchanged
+ * after calling .round_rate then upstream parent propagation is ignored. If
+ * *parent_rate comes back with a new rate for clk's parent then we propagate
+ * up to clk's parent and set it's rate. Upward propagation will continue
+ * until either a clk does not support the CLK_SET_RATE_PARENT flag or
+ * .round_rate stops requesting changes to clk's parent_rate.
*
- * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to
- * recursively propagate up to clk's parent; whether or not this happens
- * depends on the outcome of clk's .round_rate implementation. If
- * *parent_rate is 0 after calling .round_rate then upstream parent
- * propagation is ignored. If *parent_rate comes back with a new rate
- * for clk's parent then we propagate up to clk's parent and set it's
- * rate. Upward propagation will continue until either a clk does not
- * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting
- * changes to clk's parent_rate. If there is a failure during upstream
- * propagation then clk_set_rate will unwind and restore each clk's rate
- * that had been successfully changed. Afterwards a rate change abort
- * notification will be propagated downstream, starting from the clk
- * that failed.
- *
- * At the end of all of the rate setting, clk_set_rate internally calls
- * __clk_recalc_rates and propagates the rate changes downstream,
- * starting from the highest clk whose rate was changed. This has the
- * added benefit of propagating post-rate change notifiers.
- *
- * Note that while post-rate change and rate change abort notifications
- * are guaranteed to be sent to a clk only once per call to
- * clk_set_rate, pre-change notifications will be sent for every clk
- * whose rate is changed. Stacking pre-change notifications is noisy
- * for the drivers subscribed to them, but this allows drivers to react
- * to intermediate clk rate changes up until the point where the final
- * rate is achieved at the end of upstream propagation.
+ * Rate changes are accomplished via tree traversal that also recalculates the
+ * rates for the clocks and fires off POST_RATE_CHANGE notifiers.
*
* Returns 0 on success, -EERROR otherwise.
*/
@@ -906,6 +903,11 @@
if (rate == clk->rate)
goto out;
+ if ((clk->flags & CLK_SET_RATE_GATE) && __clk_is_enabled(clk)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
/* calculate new rates and get the topmost changed clock */
top = clk_calc_new_rates(clk, rate);
if (!top) {
@@ -1175,40 +1177,41 @@
*
* Initializes the lists in struct clk, queries the hardware for the
* parent and rate and sets them both.
- *
- * Any struct clk passed into __clk_init must have the following members
- * populated:
- * .name
- * .ops
- * .hw
- * .parent_names
- * .num_parents
- * .flags
- *
- * Essentially, everything that would normally be passed into clk_register is
- * assumed to be initialized already in __clk_init. The other members may be
- * populated, but are optional.
- *
- * __clk_init is only exposed via clk-private.h and is intended for use with
- * very large numbers of clocks that need to be statically initialized. It is
- * a layering violation to include clk-private.h from any code which implements
- * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.
*/
-void __clk_init(struct device *dev, struct clk *clk)
+int __clk_init(struct device *dev, struct clk *clk)
{
- int i;
+ int i, ret = 0;
struct clk *orphan;
struct hlist_node *tmp, *tmp2;
if (!clk)
- return;
+ return -EINVAL;
mutex_lock(&prepare_lock);
/* check to see if a clock with this name is already registered */
- if (__clk_lookup(clk->name))
+ if (__clk_lookup(clk->name)) {
+ pr_debug("%s: clk %s already initialized\n",
+ __func__, clk->name);
+ ret = -EEXIST;
goto out;
+ }
+
+ /* check that clk_ops are sane. See Documentation/clk.txt */
+ if (clk->ops->set_rate &&
+ !(clk->ops->round_rate && clk->ops->recalc_rate)) {
+ pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
+ __func__, clk->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (clk->ops->set_parent && !clk->ops->get_parent) {
+ pr_warning("%s: %s must implement .get_parent & .set_parent\n",
+ __func__, clk->name);
+ ret = -EINVAL;
+ goto out;
+ }
/* throw a WARN if any entries in parent_names are NULL */
for (i = 0; i < clk->num_parents; i++)
@@ -1302,45 +1305,118 @@
out:
mutex_unlock(&prepare_lock);
- return;
+ return ret;
}
/**
+ * __clk_register - register a clock and return a cookie.
+ *
+ * Same as clk_register, except that the .clk field inside hw shall point to a
+ * preallocated (generally statically allocated) struct clk. None of the fields
+ * of the struct clk need to be initialized.
+ *
+ * The data pointed to by .init and .clk field shall NOT be marked as init
+ * data.
+ *
+ * __clk_register is only exposed via clk-private.h and is intended for use with
+ * very large numbers of clocks that need to be statically initialized. It is
+ * a layering violation to include clk-private.h from any code which implements
+ * a clock's .ops; as such any statically initialized clock data MUST be in a
+ * separate C file from the logic that implements it's operations. Returns 0
+ * on success, otherwise an error code.
+ */
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
+{
+ int ret;
+ struct clk *clk;
+
+ clk = hw->clk;
+ clk->name = hw->init->name;
+ clk->ops = hw->init->ops;
+ clk->hw = hw;
+ clk->flags = hw->init->flags;
+ clk->parent_names = hw->init->parent_names;
+ clk->num_parents = hw->init->num_parents;
+
+ ret = __clk_init(dev, clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return clk;
+}
+EXPORT_SYMBOL_GPL(__clk_register);
+
+/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
* @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
*
* clk_register is the primary interface for populating the clock tree with new
* clock nodes. It returns a pointer to the newly allocated struct clk which
* cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
*/
-struct clk *clk_register(struct device *dev, const char *name,
- const struct clk_ops *ops, struct clk_hw *hw,
- char **parent_names, u8 num_parents, unsigned long flags)
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
{
+ int i, ret;
struct clk *clk;
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
- if (!clk)
- return NULL;
+ if (!clk) {
+ pr_err("%s: could not allocate clk\n", __func__);
+ ret = -ENOMEM;
+ goto fail_out;
+ }
- clk->name = name;
- clk->ops = ops;
+ clk->name = kstrdup(hw->init->name, GFP_KERNEL);
+ if (!clk->name) {
+ pr_err("%s: could not allocate clk->name\n", __func__);
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+ clk->ops = hw->init->ops;
clk->hw = hw;
- clk->flags = flags;
- clk->parent_names = parent_names;
- clk->num_parents = num_parents;
+ clk->flags = hw->init->flags;
+ clk->num_parents = hw->init->num_parents;
hw->clk = clk;
- __clk_init(dev, clk);
+ /* allocate local copy in case parent_names is __initdata */
+ clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents),
+ GFP_KERNEL);
- return clk;
+ if (!clk->parent_names) {
+ pr_err("%s: could not allocate clk->parent_names\n", __func__);
+ ret = -ENOMEM;
+ goto fail_parent_names;
+ }
+
+
+ /* copy each string name in case parent_names is __initdata */
+ for (i = 0; i < clk->num_parents; i++) {
+ clk->parent_names[i] = kstrdup(hw->init->parent_names[i],
+ GFP_KERNEL);
+ if (!clk->parent_names[i]) {
+ pr_err("%s: could not copy parent_names\n", __func__);
+ ret = -ENOMEM;
+ goto fail_parent_names_copy;
+ }
+ }
+
+ ret = __clk_init(dev, clk);
+ if (!ret)
+ return clk;
+
+fail_parent_names_copy:
+ while (--i >= 0)
+ kfree(clk->parent_names[i]);
+ kfree(clk->parent_names);
+fail_parent_names:
+ kfree(clk->name);
+fail_name:
+ kfree(clk);
+fail_out:
+ return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(clk_register);
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
new file mode 100644
index 0000000..3358860
--- /dev/null
+++ b/drivers/clk/spear/Makefile
@@ -0,0 +1,8 @@
+#
+# SPEAr Clock specific Makefile
+#
+
+obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o
+obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
new file mode 100644
index 0000000..af34074
--- /dev/null
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Auxiliary Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-aux-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: Auxiliary Synthesizer clock
+ *
+ * Aux synth gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+
+#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw)
+
+static struct aux_clk_masks default_aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+ .enable_bit = AUX_SYNT_ENB,
+};
+
+static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ u8 eq = rtbl[index].eq ? 1 : 2;
+
+ return (((prate / 10000) * rtbl[index].xscale) /
+ (rtbl[index].yscale * eq)) * 10000;
+}
+
+static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, aux_calc_rate,
+ aux->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_aux_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ unsigned int num = 1, den = 1, val, eqn;
+ unsigned long flags = 0;
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask;
+ if (eqn == aux->masks->eq1_mask)
+ den = 2;
+
+ /* calculate numerator */
+ num = (val >> aux->masks->xscale_sel_shift) &
+ aux->masks->xscale_sel_mask;
+
+ /* calculate denominator */
+ den *= (val >> aux->masks->yscale_sel_shift) &
+ aux->masks->yscale_sel_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of aux */
+static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ unsigned long val, flags = 0;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt,
+ &i);
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg) &
+ ~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift);
+ val |= (rtbl[i].eq & aux->masks->eq_sel_mask) <<
+ aux->masks->eq_sel_shift;
+ val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift);
+ val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) <<
+ aux->masks->xscale_sel_shift;
+ val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift);
+ val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) <<
+ aux->masks->yscale_sel_shift;
+ writel_relaxed(val, aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_aux_ops = {
+ .recalc_rate = clk_aux_recalc_rate,
+ .round_rate = clk_aux_round_rate,
+ .set_rate = clk_aux_set_rate,
+};
+
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk)
+{
+ struct clk_aux *aux;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+ if (!aux) {
+ pr_err("could not allocate aux clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ if (!masks)
+ aux->masks = &default_aux_masks;
+ else
+ aux->masks = masks;
+
+ aux->reg = reg;
+ aux->rtbl = rtbl;
+ aux->rtbl_cnt = rtbl_cnt;
+ aux->lock = lock;
+ aux->hw.init = &init;
+
+ init.name = aux_name;
+ init.ops = &clk_aux_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &aux->hw);
+ if (IS_ERR_OR_NULL(clk))
+ goto free_aux;
+
+ if (gate_name) {
+ struct clk *tgate_clk;
+
+ tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+ aux->masks->enable_bit, 0, lock);
+ if (IS_ERR_OR_NULL(tgate_clk))
+ goto free_aux;
+
+ if (gate_clk)
+ *gate_clk = tgate_clk;
+ }
+
+ return clk;
+
+free_aux:
+ kfree(aux);
+ pr_err("clk register failed\n");
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
new file mode 100644
index 0000000..4dbdb3f
--- /dev/null
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Fractional Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-frac-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define DIV_FACTOR_MASK 0x1FFFF
+
+/*
+ * DOC: Fractional Synthesizer clock
+ *
+ * Fout from synthesizer can be given from below equation:
+ *
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * div is (16-14 bits).(13-0 bits) (in binary)
+ *
+ * Fout = Fin/(2 * div)
+ * Fout = ((Fin / 10000)/(2 * div)) * 10000
+ * Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
+ * Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000
+ *
+ * div << 14 simply 17 bit value written at register.
+ * Max error due to scaling down by 10000 is 10 KHz
+ */
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+
+ prate /= 10000;
+ prate <<= 14;
+ prate /= (2 * rtbl[index].div);
+ prate *= 10000;
+
+ return prate;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, frac_calc_rate,
+ frac->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ div = val & DIV_FACTOR_MASK;
+
+ if (!div)
+ return 0;
+
+ parent_rate = parent_rate / 10000;
+
+ parent_rate = (parent_rate << 14) / (2 * div);
+ return parent_rate * 10000;
+}
+
+/* Configures new clock rate of frac */
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt,
+ &i);
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK;
+ val |= rtbl[i].div & DIV_FACTOR_MASK;
+ writel_relaxed(val, frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ return 0;
+}
+
+struct clk_ops clk_frac_ops = {
+ .recalc_rate = clk_frac_recalc_rate,
+ .round_rate = clk_frac_round_rate,
+ .set_rate = clk_frac_set_rate,
+};
+
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_frac *frac;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+ if (!frac) {
+ pr_err("could not allocate frac clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_frac assignments */
+ frac->reg = reg;
+ frac->rtbl = rtbl;
+ frac->rtbl_cnt = rtbl_cnt;
+ frac->lock = lock;
+ frac->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_frac_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &frac->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(frac);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
new file mode 100644
index 0000000..b471c97
--- /dev/null
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * General Purpose Timer Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-gpt-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define GPT_MSCALE_MASK 0xFFF
+#define GPT_NSCALE_SHIFT 12
+#define GPT_NSCALE_MASK 0xF
+
+/*
+ * DOC: General Purpose Timer Synthesizer clock
+ *
+ * Calculates gpt synth clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+
+#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw)
+
+static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+
+ prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1));
+
+ return prate;
+}
+
+static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate,
+ gpt->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl_relaxed(gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ div += val & GPT_MSCALE_MASK;
+ div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+
+ if (!div)
+ return 0;
+
+ return parent_rate / div;
+}
+
+/* Configures new clock rate of gpt */
+static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt,
+ &i);
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl(gpt->reg) & ~GPT_MSCALE_MASK;
+ val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT);
+
+ val |= rtbl[i].mscale & GPT_MSCALE_MASK;
+ val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT;
+
+ writel_relaxed(val, gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_gpt_ops = {
+ .recalc_rate = clk_gpt_recalc_rate,
+ .round_rate = clk_gpt_round_rate,
+ .set_rate = clk_gpt_set_rate,
+};
+
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_gpt *gpt;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gpt = kzalloc(sizeof(*gpt), GFP_KERNEL);
+ if (!gpt) {
+ pr_err("could not allocate gpt clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_gpt assignments */
+ gpt->reg = reg;
+ gpt->rtbl = rtbl;
+ gpt->rtbl_cnt = rtbl_cnt;
+ gpt->lock = lock;
+ gpt->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_gpt_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &gpt->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(gpt);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
new file mode 100644
index 0000000..dcd4bdf
--- /dev/null
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * VCO-PLL clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-vco-pll: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: VCO-PLL clock
+ *
+ * VCO and PLL rate are derived from following equations:
+ *
+ * In normal mode
+ * vco = (2 * M[15:8] * Fin)/N
+ *
+ * In Dithered mode
+ * vco = (2 * M[15:0] * Fin)/(256 * N)
+ *
+ * pll_rate = pll/2^p
+ *
+ * vco and pll are very closely bound to each other, "vco needs to program:
+ * mode, m & n" and "pll needs to program p", both share common enable/disable
+ * logic.
+ *
+ * clk_register_vco_pll() registers instances of both vco & pll.
+ * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its
+ * set_rate to vco. A single rate table exists for both the clocks, which
+ * configures m, n and p.
+ */
+
+/* PLL_CTR register masks */
+#define PLL_MODE_NORMAL 0
+#define PLL_MODE_FRACTION 1
+#define PLL_MODE_DITH_DSM 2
+#define PLL_MODE_DITH_SSM 3
+#define PLL_MODE_MASK 3
+#define PLL_MODE_SHIFT 3
+#define PLL_ENABLE 2
+
+#define PLL_LOCK_SHIFT 0
+#define PLL_LOCK_MASK 1
+
+/* PLL FRQ register masks */
+#define PLL_NORM_FDBK_M_MASK 0xFF
+#define PLL_NORM_FDBK_M_SHIFT 24
+#define PLL_DITH_FDBK_M_MASK 0xFFFF
+#define PLL_DITH_FDBK_M_SHIFT 16
+#define PLL_DIV_P_MASK 0x7
+#define PLL_DIV_P_SHIFT 8
+#define PLL_DIV_N_MASK 0xFF
+#define PLL_DIV_N_SHIFT 0
+
+#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw)
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Calculates pll clk rate for specific value of mode, m, n and p */
+static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl,
+ unsigned long prate, int index, unsigned long *pll_rate)
+{
+ unsigned long rate = prate;
+ unsigned int mode;
+
+ mode = rtbl[index].mode ? 256 : 1;
+ rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n));
+
+ if (pll_rate)
+ *pll_rate = (rate / (1 << rtbl[index].p)) * 10000;
+
+ return rate * 10000;
+}
+
+static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate, int *index)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long prev_rate, vco_prev_rate, rate = 0;
+ unsigned long vco_parent_rate =
+ __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
+
+ if (!prate) {
+ pr_err("%s: prate is must for pll clk\n", __func__);
+ return -EINVAL;
+ }
+
+ for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ vco_prev_rate = *prate;
+ *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index,
+ &rate);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ *prate = vco_prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ int unused;
+
+ return clk_pll_round_rate_index(hw, drate, prate, &unused);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long
+ parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ unsigned int p;
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ p = readl_relaxed(pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+
+ return parent_rate / (1 << p);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct pll_rate_tbl *rtbl = pll->vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_pll_round_rate_index(hw, drate, NULL, &i);
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ val = readl_relaxed(pll->vco->cfg_reg);
+ val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT);
+ val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT;
+ writel_relaxed(val, pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_pll_ops = {
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static inline unsigned long vco_calc_rate(struct clk_hw *hw,
+ unsigned long prate, int index)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+
+ return pll_calc_rate(vco->rtbl, prate, index, NULL);
+}
+
+static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, vco_calc_rate,
+ vco->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ unsigned long flags = 0;
+ unsigned int num = 2, den = 0, val, mode = 0;
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK;
+
+ val = readl_relaxed(vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+ /* calculate numerator & denominator */
+ if (!mode) {
+ /* Normal mode */
+ num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ } else {
+ /* Dithered mode */
+ num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ den *= 256;
+ }
+
+ if (!den) {
+ WARN(1, "%s: denominator can't be zero\n", __func__);
+ return 0;
+ }
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of vco */
+static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ struct pll_rate_tbl *rtbl = vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt,
+ &i);
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ val = readl_relaxed(vco->mode_reg);
+ val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT);
+ val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT;
+ writel_relaxed(val, vco->mode_reg);
+
+ val = readl_relaxed(vco->cfg_reg);
+ val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT);
+ val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT;
+
+ val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT);
+ if (rtbl[i].mode)
+ val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) <<
+ PLL_DITH_FDBK_M_SHIFT;
+ else
+ val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) <<
+ PLL_NORM_FDBK_M_SHIFT;
+
+ writel_relaxed(val, vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_vco_ops = {
+ .recalc_rate = clk_vco_recalc_rate,
+ .round_rate = clk_vco_round_rate,
+ .set_rate = clk_vco_set_rate,
+};
+
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk)
+{
+ struct clk_vco *vco;
+ struct clk_pll *pll;
+ struct clk *vco_clk, *tpll_clk, *tvco_gate_clk;
+ struct clk_init_data vco_init, pll_init;
+ const char **vco_parent_name;
+
+ if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg ||
+ !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+ if (!vco) {
+ pr_err("could not allocate vco clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("could not allocate pll clk\n");
+ goto free_vco;
+ }
+
+ /* struct clk_vco assignments */
+ vco->mode_reg = mode_reg;
+ vco->cfg_reg = cfg_reg;
+ vco->rtbl = rtbl;
+ vco->rtbl_cnt = rtbl_cnt;
+ vco->lock = lock;
+ vco->hw.init = &vco_init;
+
+ pll->vco = vco;
+ pll->hw.init = &pll_init;
+
+ if (vco_gate_name) {
+ tvco_gate_clk = clk_register_gate(NULL, vco_gate_name,
+ parent_name, 0, mode_reg, PLL_ENABLE, 0, lock);
+ if (IS_ERR_OR_NULL(tvco_gate_clk))
+ goto free_pll;
+
+ if (vco_gate_clk)
+ *vco_gate_clk = tvco_gate_clk;
+ vco_parent_name = &vco_gate_name;
+ } else {
+ vco_parent_name = &parent_name;
+ }
+
+ vco_init.name = vco_name;
+ vco_init.ops = &clk_vco_ops;
+ vco_init.flags = flags;
+ vco_init.parent_names = vco_parent_name;
+ vco_init.num_parents = 1;
+
+ pll_init.name = pll_name;
+ pll_init.ops = &clk_pll_ops;
+ pll_init.flags = CLK_SET_RATE_PARENT;
+ pll_init.parent_names = &vco_name;
+ pll_init.num_parents = 1;
+
+ vco_clk = clk_register(NULL, &vco->hw);
+ if (IS_ERR_OR_NULL(vco_clk))
+ goto free_pll;
+
+ tpll_clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR_OR_NULL(tpll_clk))
+ goto free_pll;
+
+ if (pll_clk)
+ *pll_clk = tpll_clk;
+
+ return vco_clk;
+
+free_pll:
+ kfree(pll);
+free_vco:
+ kfree(vco);
+
+ pr_err("Failed to register vco pll clock\n");
+
+ return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
new file mode 100644
index 0000000..376d4e5
--- /dev/null
+++ b/drivers/clk/spear/clk.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * SPEAr clk - Common routines
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include "clk.h"
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index)
+{
+ unsigned long prev_rate, rate = 0;
+
+ for (*index = 0; *index < rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ rate = calc_rate(hw, parent_rate, *index);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
new file mode 100644
index 0000000..3321c46
--- /dev/null
+++ b/drivers/clk/spear/clk.h
@@ -0,0 +1,134 @@
+/*
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_CLK_H
+#define __SPEAR_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+
+/* Auxiliary Synth clk */
+/* Default masks */
+#define AUX_EQ_SEL_SHIFT 30
+#define AUX_EQ_SEL_MASK 1
+#define AUX_EQ1_SEL 0
+#define AUX_EQ2_SEL 1
+#define AUX_XSCALE_SHIFT 16
+#define AUX_XSCALE_MASK 0xFFF
+#define AUX_YSCALE_SHIFT 0
+#define AUX_YSCALE_MASK 0xFFF
+#define AUX_SYNT_ENB 31
+
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
+ u32 enable_bit;
+};
+
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+struct clk_aux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct aux_clk_masks *masks;
+ struct aux_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* Fractional Synth clk */
+struct frac_rate_tbl {
+ u32 div;
+};
+
+struct clk_frac {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct frac_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* GPT clk */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+struct clk_gpt {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct gpt_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* VCO-PLL clk */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
+};
+
+struct clk_vco {
+ struct clk_hw hw;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+struct clk_pll {
+ struct clk_hw hw;
+ struct clk_vco *vco;
+ const char *parent[1];
+ spinlock_t *lock;
+};
+
+typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
+ int index);
+
+/* clk register routines */
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk);
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index);
+
+#endif /* __SPEAR_CLK_H */
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
new file mode 100644
index 0000000..440bb3e
--- /dev/null
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -0,0 +1,612 @@
+/*
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define GEN_SYNTH2_3_CLK_SHIFT 18
+ #define GEN_SYNTH2_3_CLK_MASK 1
+
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 11
+ #define GPT2_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART_CLK_ENB 3
+ #define SSP_CLK_ENB 5
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FIRDA_CLK_ENB 10
+ #define GPT1_CLK_ENB 11
+ #define GPT2_CLK_ENB 12
+ #define ADC_CLK_ENB 15
+ #define RTC_CLK_ENB 17
+ #define GPIO_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH_CLK_ENB 25
+ #define C3_CLK_ENB 31
+
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+ #define RAS_AHB_CLK_ENB 0
+ #define RAS_PLL1_CLK_ENB 1
+ #define RAS_APB_CLK_ENB 2
+ #define RAS_32K_CLK_ENB 3
+ #define RAS_24M_CLK_ENB 4
+ #define RAS_48M_CLK_ENB 5
+ #define RAS_PLL2_CLK_ENB 7
+ #define RAS_SYNT0_CLK_ENB 8
+ #define RAS_SYNT1_CLK_ENB 9
+ #define RAS_SYNT2_CLK_ENB 10
+ #define RAS_SYNT3_CLK_ENB 11
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+ #define AMEM_CLK_ENB 0
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define GEN0_CLK_SYNT (MISC_BASE + 0x06C)
+#define GEN1_CLK_SYNT (MISC_BASE + 0x070)
+#define GEN2_CLK_SYNT (MISC_BASE + 0x074)
+#define GEN3_CLK_SYNT (MISC_BASE + 0x078)
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* clock parents */
+static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
+static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+#ifdef CONFIG_MACH_SPEAR300
+static void __init spear300_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "60000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "94000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a9000000.gpio");
+
+ clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a0000000.kbd");
+}
+#endif
+
+/* array of all spear 310 clock lookups */
+#ifdef CONFIG_MACH_SPEAR310
+static void __init spear310_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "44000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "tdm");
+
+ clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2000000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2080000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2100000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2180000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2200000.serial");
+}
+#endif
+
+/* array of all spear 320 clock lookups */
+#ifdef CONFIG_MACH_SPEAR320
+ #define SMII_PCLK_SHIFT 18
+ #define SMII_PCLK_MASK 2
+ #define SMII_PCLK_VAL_PAD 0x0
+ #define SMII_PCLK_VAL_PLL2 0x1
+ #define SMII_PCLK_VAL_SYNTH0 0x2
+ #define SDHCI_PCLK_SHIFT 15
+ #define SDHCI_PCLK_MASK 1
+ #define SDHCI_PCLK_VAL_48M 0x0
+ #define SDHCI_PCLK_VAL_SYNTH3 0x1
+ #define I2S_REF_PCLK_SHIFT 8
+ #define I2S_REF_PCLK_MASK 1
+ #define I2S_REF_PCLK_SYNTH_VAL 0x1
+ #define I2S_REF_PCLK_PLL2_VAL 0x0
+ #define UART1_PCLK_SHIFT 6
+ #define UART1_PCLK_MASK 1
+ #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
+ #define SPEAR320_UARTX_PCLK_VAL_APB 0x1
+
+static const char *i2s_ref_parents[] = { "ras_pll2_clk",
+ "ras_gen2_synth_gate_clk", };
+static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
+ "ras_gen3_synth_gate_clk",
+};
+static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
+ "ras_gen0_synth_gate_clk", };
+static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
+};
+
+static void __init spear320_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL,
+ CLK_IS_ROOT, 125000000);
+ clk_register_clkdev(clk, "smii_125m_pad", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "90000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "4c000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a7000000.i2c");
+
+ clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "pwm", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a5000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a6000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+ clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+ clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "i2s");
+
+ clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
+ ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
+ I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+ 4);
+ clk_register_clkdev(clk, "i2s_sclk", NULL);
+
+ clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9300000.serial");
+
+ clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
+ ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
+ SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
+ ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG,
+ SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "smii_pclk");
+
+ clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "smii");
+
+ clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
+ UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "a3000000.serial");
+
+ clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a4000000.serial");
+
+ clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9100000.serial");
+
+ clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9200000.serial");
+
+ clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60000000.serial");
+
+ clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60100000.serial");
+}
+#endif
+
+void __init spear3xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+ /* clock derived from 24 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "fc880000.wdt");
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL,
+ "osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
+ PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ /* gpt clocks */
+ clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
+ ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ /* general synths clocks */
+ clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
+ "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
+ "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
+ GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+
+ clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen2_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen3_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "usbh_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG,
+ AMEM_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "amem_clk", NULL);
+
+ clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ C3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "c3_clk");
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "e0800000.eth");
+
+ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0180000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0100000.spi");
+
+ /* RAS clk enable */
+ clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB,
+ RAS_AHB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
+ RAS_APB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
+ RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_32k_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0,
+ RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_24m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0,
+ RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+ RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
+ "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
+ "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
+ "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
+ "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+
+ if (of_machine_is_compatible("st,spear300"))
+ spear300_clk_init();
+ else if (of_machine_is_compatible("st,spear310"))
+ spear310_clk_init();
+ else if (of_machine_is_compatible("st,spear320"))
+ spear320_clk_init();
+}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
new file mode 100644
index 0000000..f9a20b3
--- /dev/null
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -0,0 +1,342 @@
+/*
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define CLCD_CLK_SHIFT 2
+ #define CLCD_CLK_MASK 2
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 10
+ #define GPT2_CLK_SHIFT 11
+ #define GPT3_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART0_CLK_ENB 3
+ #define UART1_CLK_ENB 4
+ #define SSP0_CLK_ENB 5
+ #define SSP1_CLK_ENB 6
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FSMC_CLK_ENB 9
+ #define FIRDA_CLK_ENB 10
+ #define GPT2_CLK_ENB 11
+ #define GPT3_CLK_ENB 12
+ #define GPIO2_CLK_ENB 13
+ #define SSP2_CLK_ENB 14
+ #define ADC_CLK_ENB 15
+ #define GPT1_CLK_ENB 11
+ #define RTC_CLK_ENB 17
+ #define GPIO1_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define CLCD_CLK_ENB 22
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH0_CLK_ENB 25
+ #define USBH1_CLK_ENB 26
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+
+/* vco rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+void __init spear6xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT,
+ 30000000);
+ clk_register_clkdev(clk, "osc_30m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "rtc-spear");
+
+ /* clock derived from 30 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
+ 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "wdt");
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0080000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
+ "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
+ CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "clcd");
+
+ /* gpt clocks */
+ clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
+ GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt3");
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.0_clk");
+
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.1_clk");
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents),
+ 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ FSMC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d1800000.flash");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gmac");
+
+ clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0200000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "f0100000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d8100000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.0");
+
+ clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.1");
+
+ clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.2");
+}
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 0053d7e..8f3f74c 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/gfp.h>
+#include <linux/module.h>
#include <crypto/ctr.h>
#include <crypto/des.h>
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index dc641c7..921039e 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -124,6 +124,9 @@
void __iomem *reg;
int irq[2];
+ /* SEC global registers lock */
+ spinlock_t reg_lock ____cacheline_aligned;
+
/* SEC version geometry (from device tree node) */
unsigned int num_channels;
unsigned int chfifo_len;
@@ -412,6 +415,7 @@
{ \
struct device *dev = (struct device *)data; \
struct talitos_private *priv = dev_get_drvdata(dev); \
+ unsigned long flags; \
\
if (ch_done_mask & 1) \
flush_channel(dev, 0, 0, 0); \
@@ -427,8 +431,10 @@
out: \
/* At this point, all completed channels have been processed */ \
/* Unmask done interrupts for channels completed later on. */ \
+ spin_lock_irqsave(&priv->reg_lock, flags); \
setbits32(priv->reg + TALITOS_IMR, ch_done_mask); \
setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT); \
+ spin_unlock_irqrestore(&priv->reg_lock, flags); \
}
DEF_TALITOS_DONE(4ch, TALITOS_ISR_4CHDONE)
DEF_TALITOS_DONE(ch0_2, TALITOS_ISR_CH_0_2_DONE)
@@ -619,22 +625,28 @@
struct device *dev = data; \
struct talitos_private *priv = dev_get_drvdata(dev); \
u32 isr, isr_lo; \
+ unsigned long flags; \
\
+ spin_lock_irqsave(&priv->reg_lock, flags); \
isr = in_be32(priv->reg + TALITOS_ISR); \
isr_lo = in_be32(priv->reg + TALITOS_ISR_LO); \
/* Acknowledge interrupt */ \
out_be32(priv->reg + TALITOS_ICR, isr & (ch_done_mask | ch_err_mask)); \
out_be32(priv->reg + TALITOS_ICR_LO, isr_lo); \
\
- if (unlikely((isr & ~TALITOS_ISR_4CHDONE) & ch_err_mask || isr_lo)) \
- talitos_error(dev, isr, isr_lo); \
- else \
+ if (unlikely(isr & ch_err_mask || isr_lo)) { \
+ spin_unlock_irqrestore(&priv->reg_lock, flags); \
+ talitos_error(dev, isr & ch_err_mask, isr_lo); \
+ } \
+ else { \
if (likely(isr & ch_done_mask)) { \
/* mask further done interrupts. */ \
clrbits32(priv->reg + TALITOS_IMR, ch_done_mask); \
/* done_task will unmask done interrupts at exit */ \
tasklet_schedule(&priv->done_task[tlet]); \
} \
+ spin_unlock_irqrestore(&priv->reg_lock, flags); \
+ } \
\
return (isr & (ch_done_mask | ch_err_mask) || isr_lo) ? IRQ_HANDLED : \
IRQ_NONE; \
@@ -2719,6 +2731,8 @@
priv->ofdev = ofdev;
+ spin_lock_init(&priv->reg_lock);
+
err = talitos_probe_irq(ofdev);
if (err)
goto err_out;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index cf9da36..ef378b5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -91,11 +91,10 @@
config AT_HDMAC
tristate "Atmel AHB DMA support"
- depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on ARCH_AT91
select DMA_ENGINE
help
- Support the Atmel AHB DMA controller. This can be integrated in
- chips such as the Atmel AT91SAM9RL.
+ Support the Atmel AHB DMA controller.
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 30372f7..348b367 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -1510,8 +1510,8 @@
* \param arg pointer to a drm_buf_map structure.
* \return zero on success or a negative number on failure.
*
- * Maps the AGP, SG or PCI buffer region with do_mmap(), and copies information
- * about each buffer into user space. For PCI buffers, it calls do_mmap() with
+ * Maps the AGP, SG or PCI buffer region with vm_mmap(), and copies information
+ * about each buffer into user space. For PCI buffers, it calls vm_mmap() with
* offset equal to 0, which drm_mmap() interpretes as PCI buffers and calls
* drm_mmap_dma().
*/
@@ -1553,18 +1553,14 @@
retcode = -EINVAL;
goto done;
}
- down_write(¤t->mm->mmap_sem);
- virtual = do_mmap(file_priv->filp, 0, map->size,
+ virtual = vm_mmap(file_priv->filp, 0, map->size,
PROT_READ | PROT_WRITE,
MAP_SHARED,
token);
- up_write(¤t->mm->mmap_sem);
} else {
- down_write(¤t->mm->mmap_sem);
- virtual = do_mmap(file_priv->filp, 0, dma->byte_count,
+ virtual = vm_mmap(file_priv->filp, 0, dma->byte_count,
PROT_READ | PROT_WRITE,
MAP_SHARED, 0);
- up_write(¤t->mm->mmap_sem);
}
if (virtual > -1024UL) {
/* Real error */
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index d3aaeb6..c79870a 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -3335,10 +3335,12 @@
ret = crtc->funcs->page_flip(crtc, fb, e);
if (ret) {
- spin_lock_irqsave(&dev->event_lock, flags);
- file_priv->event_space += sizeof e->event;
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(e);
+ if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
+ spin_lock_irqsave(&dev->event_lock, flags);
+ file_priv->event_space += sizeof e->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+ }
}
out:
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index cdfbf27..123de28 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -507,12 +507,12 @@
drm_events_release(file_priv);
- if (dev->driver->driver_features & DRIVER_GEM)
- drm_gem_release(dev, file_priv);
-
if (dev->driver->driver_features & DRIVER_MODESET)
drm_fb_release(file_priv);
+ if (dev->driver->driver_features & DRIVER_GEM)
+ drm_gem_release(dev, file_priv);
+
mutex_lock(&dev->ctxlist_mutex);
if (!list_empty(&dev->ctxlist)) {
struct drm_ctx_list *pos, *n;
diff --git a/drivers/gpu/drm/drm_usb.c b/drivers/gpu/drm/drm_usb.c
index c8c83da..37c9a52 100644
--- a/drivers/gpu/drm/drm_usb.c
+++ b/drivers/gpu/drm/drm_usb.c
@@ -1,6 +1,6 @@
#include "drmP.h"
#include <linux/usb.h>
-#include <linux/export.h>
+#include <linux/module.h>
int drm_get_usb_dev(struct usb_interface *interface,
const struct usb_device_id *id,
@@ -114,3 +114,7 @@
usb_deregister(udriver);
}
EXPORT_SYMBOL(drm_usb_exit);
+
+MODULE_AUTHOR("David Airlie");
+MODULE_DESCRIPTION("USB DRM support");
+MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c
index 26d5197..392ce71 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gem.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c
@@ -581,10 +581,8 @@
obj->filp->f_op = &exynos_drm_gem_fops;
obj->filp->private_data = obj;
- down_write(¤t->mm->mmap_sem);
- addr = do_mmap(obj->filp, 0, args->size,
+ addr = vm_mmap(obj->filp, 0, args->size,
PROT_READ | PROT_WRITE, MAP_SHARED, 0);
- up_write(¤t->mm->mmap_sem);
drm_gem_object_unreference_unlocked(obj);
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
index 21071ce..36eb074 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
@@ -29,7 +29,6 @@
#define __MDFLD_DSI_OUTPUT_H__
#include <linux/backlight.h>
-#include <linux/version.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include <drm/drm_crtc.h>
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index 2c8a60c..f920fb5 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -129,6 +129,7 @@
if (buf_priv->currently_mapped == I810_BUF_MAPPED)
return -EINVAL;
+ /* This is all entirely broken */
down_write(¤t->mm->mmap_sem);
old_fops = file_priv->filp->f_op;
file_priv->filp->f_op = &i810_buffer_fops;
@@ -157,11 +158,8 @@
if (buf_priv->currently_mapped != I810_BUF_MAPPED)
return -EINVAL;
- down_write(¤t->mm->mmap_sem);
- retcode = do_munmap(current->mm,
- (unsigned long)buf_priv->virtual,
+ retcode = vm_munmap((unsigned long)buf_priv->virtual,
(size_t) buf->total);
- up_write(¤t->mm->mmap_sem);
buf_priv->currently_mapped = I810_BUF_UNMAPPED;
buf_priv->virtual = NULL;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 0e3c6ac..0d1e4b7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1087,11 +1087,9 @@
if (obj == NULL)
return -ENOENT;
- down_write(¤t->mm->mmap_sem);
- addr = do_mmap(obj->filp, 0, args->size,
+ addr = vm_mmap(obj->filp, 0, args->size,
PROT_READ | PROT_WRITE, MAP_SHARED,
args->offset);
- up_write(¤t->mm->mmap_sem);
drm_gem_object_unreference_unlocked(obj);
if (IS_ERR((void *)addr))
return addr;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bae38ac..5908cd5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3478,8 +3478,11 @@
return false;
}
- /* All interlaced capable intel hw wants timings in frames. */
- drm_mode_set_crtcinfo(adjusted_mode, 0);
+ /* All interlaced capable intel hw wants timings in frames. Note though
+ * that intel_lvds_mode_fixup does some funny tricks with the crtc
+ * timings, so we need to be careful not to clobber these.*/
+ if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}
@@ -7465,7 +7468,13 @@
OUT_RING(fb->pitches[0] | obj->tiling_mode);
OUT_RING(obj->gtt_offset);
- pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+ /* Contrary to the suggestions in the documentation,
+ * "Enable Panel Fitter" does not seem to be required when page
+ * flipping with a non-native mode, and worse causes a normal
+ * modeset to fail.
+ * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+ */
+ pf = 0;
pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
OUT_RING(pf | pipesrc);
ADVANCE_LP_RING();
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5a14149..715afa1 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -105,6 +105,10 @@
#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
#define INTEL_MODE_DP_FORCE_6BPC (0x10)
+/* This flag must be set by the encoder's mode_fixup if it changes the crtc
+ * timings in the mode to prevent the crtc fixup from overwriting them.
+ * Currently only lvds needs that. */
+#define INTEL_MODE_CRTC_TIMINGS_SET (0x20)
static inline void
intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 19ecd78..6e9ee33 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -279,6 +279,8 @@
struct drm_mode_config *config = &dev->mode_config;
struct drm_plane *plane;
+ mutex_lock(&dev->mode_config.mutex);
+
ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper);
if (ret)
DRM_DEBUG("failed to restore crtc mode\n");
@@ -286,4 +288,6 @@
/* Be sure to shut off any planes that may be active */
list_for_each_entry(plane, &config->plane_list, head)
plane->funcs->disable_plane(plane);
+
+ mutex_unlock(&dev->mode_config.mutex);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 95db2e9..30e2c82 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -187,6 +187,8 @@
mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
+
+ mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
}
static void
@@ -208,6 +210,8 @@
mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
+
+ mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
}
static inline u32 panel_fitter_scaling(u32 source, u32 target)
@@ -283,6 +287,8 @@
for_each_pipe(pipe)
I915_WRITE(BCLRPAT(pipe), 0);
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
+
switch (intel_lvds->fitting_mode) {
case DRM_MODE_SCALE_CENTER:
/*
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 230a141..48177ec 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -47,8 +47,6 @@
adjusted_mode->vtotal = fixed_mode->vtotal;
adjusted_mode->clock = fixed_mode->clock;
-
- drm_mode_set_crtcinfo(adjusted_mode, 0);
}
/* adjusted_mode has been preset to be the panel's fixed mode */
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index 34d591b..da3e7c3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -235,6 +235,7 @@
return -EPERM;
strncpy(string, profile, sizeof(string));
+ string[sizeof(string) - 1] = 0;
if ((ptr = strchr(string, '\n')))
*ptr = '\0';
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index a7844ab..2746402 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -42,7 +42,7 @@
struct drm_nouveau_private *dev_priv = dev->dev_private;
static const u8 nvaf[] = { 24, 16, 8, 0 }; /* thanks, apple.. */
static const u8 nv50[] = { 16, 8, 0, 24 };
- if (dev_priv->card_type == 0xaf)
+ if (dev_priv->chipset == 0xaf)
return nvaf[lane];
return nv50[lane];
}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index de71243..c8187c4 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1135,7 +1135,7 @@
}
if (rdev->flags & RADEON_IS_AGP) {
size_bf = mc->gtt_start;
- size_af = 0xFFFFFFFF - mc->gtt_end + 1;
+ size_af = 0xFFFFFFFF - mc->gtt_end;
if (size_bf > size_af) {
if (mc->mc_vram_size > size_bf) {
dev_warn(rdev->dev, "limiting VRAM\n");
@@ -1149,7 +1149,7 @@
mc->real_vram_size = size_af;
mc->mc_vram_size = size_af;
}
- mc->vram_start = mc->gtt_end;
+ mc->vram_start = mc->gtt_end + 1;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index bd05156..3c2e7a0 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -970,7 +970,7 @@
encoder = obj_to_encoder(obj);
- if (encoder->encoder_type != DRM_MODE_ENCODER_DAC ||
+ if (encoder->encoder_type != DRM_MODE_ENCODER_DAC &&
encoder->encoder_type != DRM_MODE_ENCODER_TVDAC)
continue;
@@ -1000,6 +1000,7 @@
* cases the DVI port is actually a virtual KVM port connected to the service
* processor.
*/
+out:
if ((!rdev->is_atom_bios) &&
(ret == connector_status_disconnected) &&
rdev->mode_info.bios_hardcoded_edid_size) {
@@ -1007,7 +1008,6 @@
ret = connector_status_connected;
}
-out:
/* updated in get modes as well since we need to know if it's analog or digital */
radeon_connector_update_scratch_regs(connector, ret);
return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index 66d5fe1..65060b7 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -147,6 +147,12 @@
(rdev->pdev->subsystem_device == 0x01fd))
return true;
+ /* RV515 seems to have MSI issues where it loses
+ * MSI rearms occasionally. This leads to lockups and freezes.
+ * disable it by default.
+ */
+ if (rdev->family == CHIP_RV515)
+ return false;
if (rdev->flags & RADEON_IS_IGP) {
/* APUs work fine with MSIs */
if (rdev->family >= CHIP_PALM)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index c62ae4b..cdab1ae 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -969,7 +969,7 @@
}
if (rdev->flags & RADEON_IS_AGP) {
size_bf = mc->gtt_start;
- size_af = 0xFFFFFFFF - mc->gtt_end + 1;
+ size_af = 0xFFFFFFFF - mc->gtt_end;
if (size_bf > size_af) {
if (mc->mc_vram_size > size_bf) {
dev_warn(rdev->dev, "limiting VRAM\n");
@@ -983,7 +983,7 @@
mc->real_vram_size = size_af;
mc->mc_vram_size = size_af;
}
- mc->vram_start = mc->gtt_end;
+ mc->vram_start = mc->gtt_end + 1;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index ac7a199..27bda98 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2999,8 +2999,8 @@
}
r = radeon_bo_pin(rdev->rlc.save_restore_obj, RADEON_GEM_DOMAIN_VRAM,
&rdev->rlc.save_restore_gpu_addr);
+ radeon_bo_unreserve(rdev->rlc.save_restore_obj);
if (r) {
- radeon_bo_unreserve(rdev->rlc.save_restore_obj);
dev_warn(rdev->dev, "(%d) pin RLC sr bo failed\n", r);
si_rlc_fini(rdev);
return r;
@@ -3023,9 +3023,8 @@
}
r = radeon_bo_pin(rdev->rlc.clear_state_obj, RADEON_GEM_DOMAIN_VRAM,
&rdev->rlc.clear_state_gpu_addr);
+ radeon_bo_unreserve(rdev->rlc.clear_state_obj);
if (r) {
-
- radeon_bo_unreserve(rdev->rlc.clear_state_obj);
dev_warn(rdev->dev, "(%d) pin RLC c bo failed\n", r);
si_rlc_fini(rdev);
return r;
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index a3d0332..ffddcba 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -34,7 +34,7 @@
config HID_BATTERY_STRENGTH
bool
depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
- default y
+ default n
config HIDRAW
bool "/dev/hidraw raw HID device support"
diff --git a/drivers/hid/hid-tivo.c b/drivers/hid/hid-tivo.c
index de47039..9f85f82 100644
--- a/drivers/hid/hid-tivo.c
+++ b/drivers/hid/hid-tivo.c
@@ -62,7 +62,7 @@
static const struct hid_device_id tivo_devices[] = {
/* TiVo Slide Bluetooth remote, pairs with a Broadcom dongle */
- { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
{ }
};
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index 7765e4f..1958f03 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -59,14 +59,11 @@
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
};
-static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
- int *value)
+static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
{
u16 config;
- s16 conversion;
struct ads1015_data *data = i2c_get_clientdata(client);
unsigned int pga = data->channel_data[channel].pga;
- int fullscale;
unsigned int data_rate = data->channel_data[channel].data_rate;
unsigned int conversion_time_ms;
int res;
@@ -78,7 +75,6 @@
if (res < 0)
goto err_unlock;
config = res;
- fullscale = fullscale_table[pga];
conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
/* setup and start single conversion */
@@ -105,33 +101,36 @@
}
res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
- if (res < 0)
- goto err_unlock;
- conversion = res;
-
- mutex_unlock(&data->update_lock);
-
- *value = DIV_ROUND_CLOSEST(conversion * fullscale, 0x7ff0);
-
- return 0;
err_unlock:
mutex_unlock(&data->update_lock);
return res;
}
+static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
+ s16 reg)
+{
+ struct ads1015_data *data = i2c_get_clientdata(client);
+ unsigned int pga = data->channel_data[channel].pga;
+ int fullscale = fullscale_table[pga];
+
+ return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
+}
+
/* sysfs callback function */
static ssize_t show_in(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct i2c_client *client = to_i2c_client(dev);
- int in;
int res;
+ int index = attr->index;
- res = ads1015_read_value(client, attr->index, &in);
+ res = ads1015_read_adc(client, index);
+ if (res < 0)
+ return res;
- return (res < 0) ? res : sprintf(buf, "%d\n", in);
+ return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
}
static const struct sensor_device_attribute ads1015_in[] = {
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index b7494af..37a8fc9 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -122,6 +122,38 @@
return true;
}
+/*
+ * Newer BKDG versions have an updated recommendation on how to properly
+ * initialize the running average range (was: 0xE, now: 0x9). This avoids
+ * counter saturations resulting in bogus power readings.
+ * We correct this value ourselves to cope with older BIOSes.
+ */
+static void __devinit tweak_runavg_range(struct pci_dev *pdev)
+{
+ u32 val;
+ const struct pci_device_id affected_device = {
+ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) };
+
+ /*
+ * let this quirk apply only to the current version of the
+ * northbridge, since future versions may change the behavior
+ */
+ if (!pci_match_id(&affected_device, pdev))
+ return;
+
+ pci_bus_read_config_dword(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+ REG_TDP_RUNNING_AVERAGE, &val);
+ if ((val & 0xf) != 0xe)
+ return;
+
+ val &= ~0xf;
+ val |= 0x9;
+ pci_bus_write_config_dword(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+ REG_TDP_RUNNING_AVERAGE, val);
+}
+
static void __devinit fam15h_power_init_data(struct pci_dev *f4,
struct fam15h_power_data *data)
{
@@ -155,6 +187,13 @@
struct device *dev;
int err;
+ /*
+ * though we ignore every other northbridge, we still have to
+ * do the tweaking on _each_ node in MCM processors as the counters
+ * are working hand-in-hand
+ */
+ tweak_runavg_range(pdev);
+
if (!fam15h_power_is_internal_node0(pdev)) {
err = -ENODEV;
goto exit;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 2d78779..7faf4a7 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -380,8 +380,7 @@
config INPUT_TWL6040_VIBRA
tristate "Support for TWL6040 Vibrator"
- depends on TWL4030_CORE
- select TWL6040_CORE
+ depends on TWL6040_CORE
select INPUT_FF_MEMLESS
help
This option enables support for TWL6040 Vibrator Driver.
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 45874fe..14e94f5 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -28,7 +28,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
-#include <linux/i2c/twl.h>
+#include <linux/input.h>
#include <linux/mfd/twl6040.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -257,7 +257,7 @@
static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
{
- struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
+ struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
struct vibra_info *info;
int ret;
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 800243b..64ad702 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -35,7 +35,7 @@
* NOTE: we reuse the platform_data structure of GPIO leds,
* but repurpose its "gpio" number as a PWM channel number.
*/
-static int __init pwmled_probe(struct platform_device *pdev)
+static int __devinit pwmled_probe(struct platform_device *pdev)
{
const struct gpio_led_platform_data *pdata;
struct pwmled *leds;
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index 7f98984..eab2ea4 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -54,6 +54,7 @@
struct list_head hybrid_tuner_instance_list;
u32 if_khz;
+ u32 xtal_khz;
u32 freq_hz;
u32 bandwidth;
u8 video_standard;
@@ -214,9 +215,9 @@
.size = 12401,
};
-static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = {
- .name = "dvb-fe-xc5000c-41.024.5-31875.fw",
- .size = 16503,
+static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
+ .name = "dvb-fe-xc5000c-41.024.5.fw",
+ .size = 16497,
};
static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
@@ -226,7 +227,7 @@
case XC5000A:
return &xc5000a_1_6_114;
case XC5000C:
- return &xc5000c_41_024_5_31875;
+ return &xc5000c_41_024_5;
}
}
@@ -572,6 +573,31 @@
return found;
}
+static int xc_set_xtal(struct dvb_frontend *fe)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret = XC_RESULT_SUCCESS;
+
+ switch (priv->chip_id) {
+ default:
+ case XC5000A:
+ /* 32.000 MHz xtal is default */
+ break;
+ case XC5000C:
+ switch (priv->xtal_khz) {
+ default:
+ case 32000:
+ /* 32.000 MHz xtal is default */
+ break;
+ case 31875:
+ /* 31.875 MHz xtal configuration */
+ ret = xc_write_reg(priv, 0x000f, 0x8081);
+ break;
+ }
+ break;
+ }
+ return ret;
+}
static int xc5000_fwupload(struct dvb_frontend *fe)
{
@@ -603,6 +629,8 @@
} else {
printk(KERN_INFO "xc5000: firmware uploading...\n");
ret = xc_load_i2c_sequence(fe, fw->data);
+ if (XC_RESULT_SUCCESS == ret)
+ ret = xc_set_xtal(fe);
printk(KERN_INFO "xc5000: firmware upload complete...\n");
}
@@ -1164,6 +1192,9 @@
priv->if_khz = cfg->if_khz;
}
+ if (priv->xtal_khz == 0)
+ priv->xtal_khz = cfg->xtal_khz;
+
if (priv->radio_input == 0)
priv->radio_input = cfg->radio_input;
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
index 3396f8e..39a73bf 100644
--- a/drivers/media/common/tuners/xc5000.h
+++ b/drivers/media/common/tuners/xc5000.h
@@ -34,6 +34,7 @@
u8 i2c_address;
u32 if_khz;
u8 radio_input;
+ u32 xtal_khz;
int chip_id;
};
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 39696c6..0f64d71 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1446,6 +1446,28 @@
__func__);
return -EINVAL;
}
+ /*
+ * Get a delivery system that is compatible with DVBv3
+ * NOTE: in order for this to work with softwares like Kaffeine that
+ * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to
+ * DVB-S, drivers that support both should put the SYS_DVBS entry
+ * before the SYS_DVBS2, otherwise it won't switch back to DVB-S.
+ * The real fix is that userspace applications should not use DVBv3
+ * and not trust on calling FE_SET_FRONTEND to switch the delivery
+ * system.
+ */
+ ncaps = 0;
+ while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
+ if (fe->ops.delsys[ncaps] == desired_system) {
+ delsys = desired_system;
+ break;
+ }
+ ncaps++;
+ }
+ if (delsys == SYS_UNDEFINED) {
+ dprintk("%s() Couldn't find a delivery system that matches %d\n",
+ __func__, desired_system);
+ }
} else {
/*
* This is a DVBv5 call. So, it likely knows the supported
@@ -1494,9 +1516,10 @@
__func__);
return -EINVAL;
}
- c->delivery_system = delsys;
}
+ c->delivery_system = delsys;
+
/*
* The DVBv3 or DVBv5 call is requesting a different system. So,
* emulation is needed.
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 36d1175..a414b1f 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -1520,8 +1520,10 @@
dprintk(1, "\n");
if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
- ((resultLen > 0) && (result == NULL)))
- goto error;
+ ((resultLen > 0) && (result == NULL))) {
+ printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+ return status;
+ }
mutex_lock(&state->mutex);
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index b09c5fa..af52658 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -1046,6 +1046,7 @@
goto exit_unregister_led;
}
+ data->dev->driver_type = RC_DRIVER_IR_RAW;
data->dev->driver_name = WBCIR_NAME;
data->dev->input_name = WBCIR_NAME;
data->dev->input_phys = "wbcir/cir0";
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f2479c5..ce1e7ba 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -492,7 +492,7 @@
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
---help---
This driver supports MT9M032 camera sensors from Aptina, monochrome
diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c
index 7636672..645973c 100644
--- a/drivers/media/video/mt9m032.c
+++ b/drivers/media/video/mt9m032.c
@@ -392,10 +392,11 @@
}
/* Scaling is not supported, the format is thus fixed. */
- ret = mt9m032_get_pad_format(subdev, fh, fmt);
+ fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which);
+ ret = 0;
done:
- mutex_lock(&sensor->lock);
+ mutex_unlock(&sensor->lock);
return ret;
}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 29f463c..11e44386 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -268,10 +268,17 @@
This is used to control charging LED brightness.
config TWL6040_CORE
- bool
- depends on TWL4030_CORE && GENERIC_HARDIRQS
+ bool "Support for TWL6040 audio codec"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
+ select REGMAP_I2C
default n
+ help
+ Say yes here if you want support for Texas Instruments TWL6040 audio
+ codec.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device (audio, vibra).
config MFD_STMPE
bool "Support STMicroelectronics STMPE"
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 1895cf9..1582c3d 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -527,7 +527,9 @@
static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO;
+ struct asic3 *asic = container_of(chip, struct asic3, gpio);
+
+ return (offset < ASIC3_NUM_GPIOS) ? asic->irq_base + offset : -ENXIO;
}
static __init int asic3_gpio_probe(struct platform_device *pdev,
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 95a2e54..c8aae66 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,7 +25,6 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
-#include <linux/gpio.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
@@ -502,19 +501,6 @@
pm_runtime_get_sync(dev);
spin_lock_irqsave(&omap->lock, flags);
- if (pdata->ehci_data->phy_reset) {
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
-
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- udelay(10);
- }
-
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
@@ -593,39 +579,10 @@
usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
}
- if (pdata->ehci_data->phy_reset) {
- /* Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
-
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_set_value
- (pdata->ehci_data->reset_gpio_port[0], 1);
-
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_set_value
- (pdata->ehci_data->reset_gpio_port[1], 1);
- }
-
spin_unlock_irqrestore(&omap->lock, flags);
pm_runtime_put_sync(dev);
}
-static void omap_usbhs_deinit(struct device *dev)
-{
- struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = &omap->platdata;
-
- if (pdata->ehci_data->phy_reset) {
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_free(pdata->ehci_data->reset_gpio_port[0]);
-
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_free(pdata->ehci_data->reset_gpio_port[1]);
- }
-}
-
/**
* usbhs_omap_probe - initialize TI-based HCDs
@@ -860,7 +817,6 @@
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
- omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c
index 99ef944..44afae0 100644
--- a/drivers/mfd/rc5t583.c
+++ b/drivers/mfd/rc5t583.c
@@ -80,44 +80,6 @@
{.name = "rc5t583-key", }
};
-int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
-{
- struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
- return regmap_write(rc5t583->regmap, reg, val);
-}
-
-int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
-{
- struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
- unsigned int ival;
- int ret;
- ret = regmap_read(rc5t583->regmap, reg, &ival);
- if (!ret)
- *val = (uint8_t)ival;
- return ret;
-}
-
-int rc5t583_set_bits(struct device *dev, unsigned int reg,
- unsigned int bit_mask)
-{
- struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
- return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
-}
-
-int rc5t583_clear_bits(struct device *dev, unsigned int reg,
- unsigned int bit_mask)
-{
- struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
- return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
-}
-
-int rc5t583_update(struct device *dev, unsigned int reg,
- unsigned int val, unsigned int mask)
-{
- struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
- return regmap_update_bits(rc5t583->regmap, reg, mask, val);
-}
-
static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
int id, int ext_pwr, int slots)
{
@@ -197,6 +159,7 @@
ds_id, ext_pwr_req);
return 0;
}
+EXPORT_SYMBOL(rc5t583_ext_power_req_config);
static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
struct rc5t583_platform_data *pdata)
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index b2d8e51..2d6beda 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -30,7 +30,9 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/delay.h>
-#include <linux/i2c/twl.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
@@ -39,7 +41,7 @@
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
int ret;
- u8 val = 0;
+ unsigned int val;
mutex_lock(&twl6040->io_mutex);
/* Vibra control registers from cache */
@@ -47,7 +49,7 @@
reg == TWL6040_REG_VIBCTLR)) {
val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
} else {
- ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+ ret = regmap_read(twl6040->regmap, reg, &val);
if (ret < 0) {
mutex_unlock(&twl6040->io_mutex);
return ret;
@@ -64,7 +66,7 @@
int ret;
mutex_lock(&twl6040->io_mutex);
- ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+ ret = regmap_write(twl6040->regmap, reg, val);
/* Cache the vibra control registers */
if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
@@ -77,16 +79,9 @@
int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
{
int ret;
- u8 val;
mutex_lock(&twl6040->io_mutex);
- ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
- if (ret)
- goto out;
-
- val |= mask;
- ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
-out:
+ ret = regmap_update_bits(twl6040->regmap, reg, mask, mask);
mutex_unlock(&twl6040->io_mutex);
return ret;
}
@@ -95,16 +90,9 @@
int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
{
int ret;
- u8 val;
mutex_lock(&twl6040->io_mutex);
- ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
- if (ret)
- goto out;
-
- val &= ~mask;
- ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
-out:
+ ret = regmap_update_bits(twl6040->regmap, reg, mask, 0);
mutex_unlock(&twl6040->io_mutex);
return ret;
}
@@ -494,32 +482,58 @@
},
};
-static int __devinit twl6040_probe(struct platform_device *pdev)
+static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
{
- struct twl4030_audio_data *pdata = pdev->dev.platform_data;
+ /* Register 0 is not readable */
+ if (!reg)
+ return false;
+ return true;
+}
+
+static struct regmap_config twl6040_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = TWL6040_REG_STATUS, /* 0x2e */
+
+ .readable_reg = twl6040_readable_reg,
+};
+
+static int __devinit twl6040_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct twl6040_platform_data *pdata = client->dev.platform_data;
struct twl6040 *twl6040;
struct mfd_cell *cell = NULL;
int ret, children = 0;
if (!pdata) {
- dev_err(&pdev->dev, "Platform data is missing\n");
+ dev_err(&client->dev, "Platform data is missing\n");
return -EINVAL;
}
/* In order to operate correctly we need valid interrupt config */
- if (!pdata->naudint_irq || !pdata->irq_base) {
- dev_err(&pdev->dev, "Invalid IRQ configuration\n");
+ if (!client->irq || !pdata->irq_base) {
+ dev_err(&client->dev, "Invalid IRQ configuration\n");
return -EINVAL;
}
- twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL);
- if (!twl6040)
- return -ENOMEM;
+ twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
+ GFP_KERNEL);
+ if (!twl6040) {
+ ret = -ENOMEM;
+ goto err;
+ }
- platform_set_drvdata(pdev, twl6040);
+ twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config);
+ if (IS_ERR(twl6040->regmap)) {
+ ret = PTR_ERR(twl6040->regmap);
+ goto err;
+ }
- twl6040->dev = &pdev->dev;
- twl6040->irq = pdata->naudint_irq;
+ i2c_set_clientdata(client, twl6040);
+
+ twl6040->dev = &client->dev;
+ twl6040->irq = client->irq;
twl6040->irq_base = pdata->irq_base;
mutex_init(&twl6040->mutex);
@@ -588,12 +602,12 @@
}
if (children) {
- ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells,
+ ret = mfd_add_devices(&client->dev, -1, twl6040->cells,
children, NULL, 0);
if (ret)
goto mfd_err;
} else {
- dev_err(&pdev->dev, "No platform data found for children\n");
+ dev_err(&client->dev, "No platform data found for children\n");
ret = -ENODEV;
goto mfd_err;
}
@@ -608,14 +622,15 @@
if (gpio_is_valid(twl6040->audpwron))
gpio_free(twl6040->audpwron);
gpio1_err:
- platform_set_drvdata(pdev, NULL);
- kfree(twl6040);
+ i2c_set_clientdata(client, NULL);
+ regmap_exit(twl6040->regmap);
+err:
return ret;
}
-static int __devexit twl6040_remove(struct platform_device *pdev)
+static int __devexit twl6040_remove(struct i2c_client *client)
{
- struct twl6040 *twl6040 = platform_get_drvdata(pdev);
+ struct twl6040 *twl6040 = i2c_get_clientdata(client);
if (twl6040->power_count)
twl6040_power(twl6040, 0);
@@ -626,23 +641,30 @@
free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
twl6040_irq_exit(twl6040);
- mfd_remove_devices(&pdev->dev);
- platform_set_drvdata(pdev, NULL);
- kfree(twl6040);
+ mfd_remove_devices(&client->dev);
+ i2c_set_clientdata(client, NULL);
+ regmap_exit(twl6040->regmap);
return 0;
}
-static struct platform_driver twl6040_driver = {
+static const struct i2c_device_id twl6040_i2c_id[] = {
+ { "twl6040", 0, },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
+
+static struct i2c_driver twl6040_driver = {
+ .driver = {
+ .name = "twl6040",
+ .owner = THIS_MODULE,
+ },
.probe = twl6040_probe,
.remove = __devexit_p(twl6040_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = "twl6040",
- },
+ .id_table = twl6040_i2c_id,
};
-module_platform_driver(twl6040_driver);
+module_i2c_driver(twl6040_driver);
MODULE_DESCRIPTION("TWL6040 MFD");
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index b180965..dabec55 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -873,7 +873,7 @@
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
- unsigned int from, nr, arg;
+ unsigned int from, nr, arg, trim_arg, erase_arg;
int err = 0, type = MMC_BLK_SECDISCARD;
if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) {
@@ -881,20 +881,26 @@
goto out;
}
- /* The sanitize operation is supported at v4.5 only */
- if (mmc_can_sanitize(card)) {
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_SANITIZE_START, 1, 0);
- goto out;
- }
-
from = blk_rq_pos(req);
nr = blk_rq_sectors(req);
- if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
- arg = MMC_SECURE_TRIM1_ARG;
- else
- arg = MMC_SECURE_ERASE_ARG;
+ /* The sanitize operation is supported at v4.5 only */
+ if (mmc_can_sanitize(card)) {
+ erase_arg = MMC_ERASE_ARG;
+ trim_arg = MMC_TRIM_ARG;
+ } else {
+ erase_arg = MMC_SECURE_ERASE_ARG;
+ trim_arg = MMC_SECURE_TRIM1_ARG;
+ }
+
+ if (mmc_erase_group_aligned(card, from, nr))
+ arg = erase_arg;
+ else if (mmc_can_trim(card))
+ arg = trim_arg;
+ else {
+ err = -EINVAL;
+ goto out;
+ }
retry:
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
@@ -904,25 +910,41 @@
INAND_CMD38_ARG_SECERASE,
0);
if (err)
- goto out;
+ goto out_retry;
}
+
err = mmc_erase(card, from, nr, arg);
- if (!err && arg == MMC_SECURE_TRIM1_ARG) {
+ if (err == -EIO)
+ goto out_retry;
+ if (err)
+ goto out;
+
+ if (arg == MMC_SECURE_TRIM1_ARG) {
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
INAND_CMD38_ARG_EXT_CSD,
INAND_CMD38_ARG_SECTRIM2,
0);
if (err)
- goto out;
+ goto out_retry;
}
+
err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
+ if (err == -EIO)
+ goto out_retry;
+ if (err)
+ goto out;
}
-out:
- if (err == -EIO && !mmc_blk_reset(md, card->host, type))
+
+ if (mmc_can_sanitize(card))
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_SANITIZE_START, 1, 0);
+out_retry:
+ if (err && !mmc_blk_reset(md, card->host, type))
goto retry;
if (!err)
mmc_blk_reset_success(md, type);
+out:
spin_lock_irq(&md->lock);
__blk_end_request(req, err, blk_rq_bytes(req));
spin_unlock_irq(&md->lock);
@@ -1802,7 +1824,7 @@
}
#ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
+static int mmc_blk_suspend(struct mmc_card *card)
{
struct mmc_blk_data *part_md;
struct mmc_blk_data *md = mmc_get_drvdata(card);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 2517547..996f8e3 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -139,7 +139,7 @@
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
q->limits.max_discard_sectors = max_discard;
- if (card->erased_byte == 0)
+ if (card->erased_byte == 0 && !mmc_can_discard(card))
q->limits.discard_zeroes_data = 1;
q->limits.discard_granularity = card->pref_erase << 9;
/* granularity must not be greater than max. discard */
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 3f60606..c60cee9 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -122,14 +122,14 @@
return 0;
}
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
{
struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
int ret = 0;
if (dev->driver && drv->suspend)
- ret = drv->suspend(card, state);
+ ret = drv->suspend(card);
return ret;
}
@@ -165,20 +165,14 @@
return pm_runtime_suspend(dev);
}
-static const struct dev_pm_ops mmc_bus_pm_ops = {
- .runtime_suspend = mmc_runtime_suspend,
- .runtime_resume = mmc_runtime_resume,
- .runtime_idle = mmc_runtime_idle,
-};
-
-#define MMC_PM_OPS_PTR (&mmc_bus_pm_ops)
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define MMC_PM_OPS_PTR NULL
-
#endif /* !CONFIG_PM_RUNTIME */
+static const struct dev_pm_ops mmc_bus_pm_ops = {
+ SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+ mmc_runtime_idle)
+ SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
+};
+
static struct bus_type mmc_bus_type = {
.name = "mmc",
.dev_attrs = mmc_dev_attrs,
@@ -186,9 +180,7 @@
.uevent = mmc_bus_uevent,
.probe = mmc_bus_probe,
.remove = mmc_bus_remove,
- .suspend = mmc_bus_suspend,
- .resume = mmc_bus_resume,
- .pm = MMC_PM_OPS_PTR,
+ .pm = &mmc_bus_pm_ops,
};
int mmc_register_bus(void)
diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c
index 29de31e..2c14be7 100644
--- a/drivers/mmc/core/cd-gpio.c
+++ b/drivers/mmc/core/cd-gpio.c
@@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
+#include <linux/mmc/cd-gpio.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7474c47..ba821fe 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1409,7 +1409,10 @@
{
unsigned int erase_timeout;
- if (card->ext_csd.erase_group_def & 1) {
+ if (arg == MMC_DISCARD_ARG ||
+ (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) {
+ erase_timeout = card->ext_csd.trim_timeout;
+ } else if (card->ext_csd.erase_group_def & 1) {
/* High Capacity Erase Group Size uses HC timeouts */
if (arg == MMC_TRIM_ARG)
erase_timeout = card->ext_csd.trim_timeout;
@@ -1681,8 +1684,6 @@
{
if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
return 1;
- if (mmc_can_discard(card))
- return 1;
return 0;
}
EXPORT_SYMBOL(mmc_can_trim);
@@ -1701,6 +1702,8 @@
int mmc_can_sanitize(struct mmc_card *card)
{
+ if (!mmc_can_trim(card) && !mmc_can_erase(card))
+ return 0;
if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE)
return 1;
return 0;
@@ -2235,6 +2238,7 @@
mmc_card_is_removable(host))
return err;
+ mmc_claim_host(host);
if (card && mmc_card_mmc(card) &&
(card->ext_csd.cache_size > 0)) {
enable = !!enable;
@@ -2252,6 +2256,7 @@
card->ext_csd.cache_ctrl = enable;
}
}
+ mmc_release_host(host);
return err;
}
@@ -2269,49 +2274,32 @@
cancel_delayed_work(&host->detect);
mmc_flush_scheduled_work();
- if (mmc_try_claim_host(host)) {
- err = mmc_cache_ctrl(host, 0);
- mmc_release_host(host);
- } else {
- err = -EBUSY;
- }
+ err = mmc_cache_ctrl(host, 0);
if (err)
goto out;
mmc_bus_get(host);
if (host->bus_ops && !host->bus_dead) {
- /*
- * A long response time is not acceptable for device drivers
- * when doing suspend. Prevent mmc_claim_host in the suspend
- * sequence, to potentially wait "forever" by trying to
- * pre-claim the host.
- */
- if (mmc_try_claim_host(host)) {
- if (host->bus_ops->suspend) {
- err = host->bus_ops->suspend(host);
- }
- mmc_release_host(host);
+ if (host->bus_ops->suspend)
+ err = host->bus_ops->suspend(host);
- if (err == -ENOSYS || !host->bus_ops->resume) {
- /*
- * We simply "remove" the card in this case.
- * It will be redetected on resume. (Calling
- * bus_ops->remove() with a claimed host can
- * deadlock.)
- */
- if (host->bus_ops->remove)
- host->bus_ops->remove(host);
- mmc_claim_host(host);
- mmc_detach_bus(host);
- mmc_power_off(host);
- mmc_release_host(host);
- host->pm_flags = 0;
- err = 0;
- }
- } else {
- err = -EBUSY;
+ if (err == -ENOSYS || !host->bus_ops->resume) {
+ /*
+ * We simply "remove" the card in this case.
+ * It will be redetected on resume. (Calling
+ * bus_ops->remove() with a claimed host can
+ * deadlock.)
+ */
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_power_off(host);
+ mmc_release_host(host);
+ host->pm_flags = 0;
+ err = 0;
}
}
mmc_bus_put(host);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index bf3c9b4..ab3fc46 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -526,8 +526,10 @@
return -ENODEV;
sg_len = dw_mci_pre_dma_transfer(host, data, 0);
- if (sg_len < 0)
+ if (sg_len < 0) {
+ host->dma_ops->stop(host);
return sg_len;
+ }
host->using_dma = 1;
@@ -1879,7 +1881,8 @@
if (!host->dma_ops)
goto no_dma;
- if (host->dma_ops->init) {
+ if (host->dma_ops->init && host->dma_ops->start &&
+ host->dma_ops->stop && host->dma_ops->cleanup) {
if (host->dma_ops->init(host)) {
dev_err(&host->dev, "%s: Unable to initialize "
"DMA Controller.\n", __func__);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 5c2b1c1..56d4499 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -249,7 +249,7 @@
* the pbias cell programming support is still missing when
* booting with Device tree
*/
- if (of_have_populated_dt() && !vdd)
+ if (dev->of_node && !vdd)
return 0;
if (mmc_slot(host).before_set_reg)
@@ -1549,7 +1549,7 @@
* can't be allowed when booting with device
* tree.
*/
- (!of_have_populated_dt())) {
+ !host->dev->of_node) {
/*
* The mmc_select_voltage fn of the core does
* not seem to set the power_mode to
@@ -1741,7 +1741,7 @@
.data = &omap4_reg_offset,
},
{},
-}
+};
MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 6193a0d..8abdaf6 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -467,8 +467,7 @@
clk_prepare_enable(clk);
pltfm_host->clk = clk;
- if (!is_imx25_esdhc(imx_data))
- host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9aa77f3..ccefdeb 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -147,7 +147,7 @@
u32 present, irqs;
if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
- !mmc_card_is_removable(host->mmc))
+ (host->mmc->caps & MMC_CAP_NONREMOVABLE))
return;
present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d20f133..111569c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -991,8 +991,8 @@
}
}
-static void pci_restore_config_space(struct pci_dev *pdev, int start, int end,
- int retry)
+static void pci_restore_config_space_range(struct pci_dev *pdev,
+ int start, int end, int retry)
{
int index;
@@ -1002,6 +1002,18 @@
retry);
}
+static void pci_restore_config_space(struct pci_dev *pdev)
+{
+ if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
+ pci_restore_config_space_range(pdev, 10, 15, 0);
+ /* Restore BARs before the command register. */
+ pci_restore_config_space_range(pdev, 4, 9, 10);
+ pci_restore_config_space_range(pdev, 0, 3, 0);
+ } else {
+ pci_restore_config_space_range(pdev, 0, 15, 0);
+ }
+}
+
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
@@ -1015,13 +1027,7 @@
pci_restore_pcie_state(dev);
pci_restore_ats_state(dev);
- pci_restore_config_space(dev, 10, 15, 0);
- /*
- * The Base Address register should be programmed before the command
- * register(s)
- */
- pci_restore_config_space(dev, 4, 9, 10);
- pci_restore_config_space(dev, 0, 3, 0);
+ pci_restore_config_space(dev);
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index c21871a..bc2e8a7 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2844,6 +2844,7 @@
sector_t recid, trkid;
unsigned int offs;
unsigned int count, count_to_trk_end;
+ int ret;
basedev = block->base;
if (rq_data_dir(req) == READ) {
@@ -2884,8 +2885,8 @@
itcw = itcw_init(cqr->data, itcw_size, itcw_op, 0, ctidaw, 0);
if (IS_ERR(itcw)) {
- dasd_sfree_request(cqr, startdev);
- return ERR_PTR(-EINVAL);
+ ret = -EINVAL;
+ goto out_error;
}
cqr->cpaddr = itcw_get_tcw(itcw);
if (prepare_itcw(itcw, first_trk, last_trk,
@@ -2897,8 +2898,8 @@
/* Clock not in sync and XRC is enabled.
* Try again later.
*/
- dasd_sfree_request(cqr, startdev);
- return ERR_PTR(-EAGAIN);
+ ret = -EAGAIN;
+ goto out_error;
}
len_to_track_end = 0;
/*
@@ -2937,8 +2938,10 @@
tidaw_flags = 0;
last_tidaw = itcw_add_tidaw(itcw, tidaw_flags,
dst, part_len);
- if (IS_ERR(last_tidaw))
- return ERR_PTR(-EINVAL);
+ if (IS_ERR(last_tidaw)) {
+ ret = -EINVAL;
+ goto out_error;
+ }
dst += part_len;
}
}
@@ -2947,8 +2950,10 @@
dst = page_address(bv->bv_page) + bv->bv_offset;
last_tidaw = itcw_add_tidaw(itcw, 0x00,
dst, bv->bv_len);
- if (IS_ERR(last_tidaw))
- return ERR_PTR(-EINVAL);
+ if (IS_ERR(last_tidaw)) {
+ ret = -EINVAL;
+ goto out_error;
+ }
}
}
last_tidaw->flags |= TIDAW_FLAGS_LAST;
@@ -2968,6 +2973,9 @@
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
+out_error:
+ dasd_sfree_request(cqr, startdev);
+ return ERR_PTR(ret);
}
static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 85f4a9a..73bef0b 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -903,7 +903,7 @@
goto fail_urdev_put;
}
- cdev_init(urd->char_device, &ur_fops);
+ urd->char_device->ops = &ur_fops;
urd->char_device->dev = MKDEV(major, minor);
urd->char_device->owner = ur_fops.owner;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 24145c3..6cc4358 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1073,8 +1073,10 @@
(new_serial.close_delay != port->close_delay) ||
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK))) {
+ tty_unlock();
return -EPERM;
+ }
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
state->custom_divisor = new_serial.custom_divisor;
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index e6c3dbd..836fe273 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -154,10 +154,9 @@
port->x_char = 0;
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- clps711xuart_stop_tx(port);
- return IRQ_HANDLED;
- }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ goto disable_tx_irq;
count = port->fifosize >> 1;
do {
@@ -171,8 +170,11 @@
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- clps711xuart_stop_tx(port);
+ if (uart_circ_empty(xmit)) {
+ disable_tx_irq:
+ disable_irq_nosync(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index bbbec4a..c2816f4 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1447,9 +1447,11 @@
__func__);
return -EOPNOTSUPP;
#endif
- priv->use_dma = 1;
priv->use_dma_flag = 1;
dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
+ if (!priv->use_dma)
+ pch_request_dma(port);
+ priv->use_dma = 1;
}
return 0;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a2aa9d6..ec6c97d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1667,7 +1667,6 @@
{
struct usb_device *udev = *pdev;
int i;
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
@@ -1690,9 +1689,7 @@
* so that the hardware is now fully quiesced.
*/
dev_dbg (&udev->dev, "unregistering device\n");
- mutex_lock(hcd->bandwidth_mutex);
usb_disable_device(udev, 0);
- mutex_unlock(hcd->bandwidth_mutex);
usb_hcd_synchronize_unlinks(udev);
usb_remove_ep_devs(&udev->ep0);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index aed3e07..ca717da 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1136,8 +1136,6 @@
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
@@ -1190,7 +1188,9 @@
usb_disable_endpoint(dev, i + USB_DIR_IN, false);
}
/* Remove endpoints from the host controller internal state */
+ mutex_lock(hcd->bandwidth_mutex);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ mutex_unlock(hcd->bandwidth_mutex);
/* Second pass: remove endpoint pointers */
}
for (i = skip_ep0; i < 16; ++i) {
@@ -1750,7 +1750,6 @@
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
- mutex_lock(hcd->bandwidth_mutex);
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device(dev, 1); /* Skip ep0 */
@@ -1763,6 +1762,7 @@
* host controller will not allow submissions to dropped endpoints. If
* this call fails, the device state is unchanged.
*/
+ mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7bd815a..99b58d84 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -206,11 +206,11 @@
for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
- if (evt) {
+ if (evt)
dwc3_free_one_event_buffer(dwc, evt);
- dwc->ev_buffs[i] = NULL;
- }
}
+
+ kfree(dwc->ev_buffs);
}
/**
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 25910e2..3584a16 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -353,6 +353,9 @@
dwc->test_mode_nr = wIndex >> 8;
dwc->test_mode = true;
+ break;
+ default:
+ return -EINVAL;
}
break;
@@ -559,15 +562,20 @@
length = trb->size & DWC3_TRB_SIZE_MASK;
if (dwc->ep0_bounced) {
+ unsigned transfer_size = ur->length;
+ unsigned maxp = ep0->endpoint.maxpacket;
+
+ transfer_size += (maxp - (transfer_size % maxp));
transferred = min_t(u32, ur->length,
- ep0->endpoint.maxpacket - length);
+ transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
- ur->actual += transferred;
}
+ ur->actual += transferred;
+
if ((epnum & 1) && ur->actual < ur->length) {
/* for some reason we did not get everything out */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0c935d7..9d7bcd9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1863,8 +1863,8 @@
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- 0, driver_name, udc)) {
+ if (request_irq(gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
retval = -EBUSY;
@@ -1886,7 +1886,7 @@
return 0;
fail4:
if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
fail3:
if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
@@ -1924,7 +1924,7 @@
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(udc->board.vbus_pin, udc);
+ free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
gpio_free(udc->board.vbus_pin);
}
free_irq(udc->udp_irq, udc);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 1cbba70..f52cb1a 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -712,7 +712,7 @@
if (code == FUNCTIONFS_INTERFACE_REVMAP) {
struct ffs_function *func = ffs->func;
ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
- } else if (gadget->ops->ioctl) {
+ } else if (gadget && gadget->ops->ioctl) {
ret = gadget->ops->ioctl(gadget, code, value);
} else {
ret = -ENOTTY;
@@ -1382,6 +1382,7 @@
ffs->ep0req = NULL;
ffs->gadget = NULL;
ffs_data_put(ffs);
+ clear_bit(FFS_FL_BOUND, &ffs->flags);
}
}
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 7b1cf18..5234365 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -500,6 +500,7 @@
if (buf) {
memcpy(req->buf, buf, n);
req->complete = rndis_response_complete;
+ req->context = rndis;
rndis_free_response(rndis->config, buf);
value = n;
}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 5f94e79..55abfb6 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -730,7 +730,7 @@
: (1 << (ep_index(ep)));
/* check if the pipe is empty */
- if (!(list_empty(&ep->queue))) {
+ if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) {
/* Add td to the end */
struct fsl_req *lastreq;
lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
@@ -918,10 +918,6 @@
return -ENOMEM;
}
- /* Update ep0 state */
- if ((ep_index(ep) == 0))
- udc->ep0_state = DATA_STATE_XMIT;
-
/* irq handler advances the queue */
if (req != NULL)
list_add_tail(&req->queue, &ep->queue);
@@ -1279,7 +1275,8 @@
udc->ep0_dir = USB_DIR_OUT;
ep = &udc->eps[0];
- udc->ep0_state = WAIT_FOR_OUT_STATUS;
+ if (udc->ep0_state != DATA_STATE_XMIT)
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
req->ep = ep;
req->req.length = 0;
@@ -1384,6 +1381,9 @@
list_add_tail(&req->queue, &ep->queue);
udc->ep0_state = DATA_STATE_XMIT;
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
return;
stall:
ep0stall(udc);
@@ -1492,6 +1492,14 @@
spin_lock(&udc->lock);
udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
? DATA_STATE_XMIT : DATA_STATE_RECV;
+ /*
+ * If the data stage is IN, send status prime immediately.
+ * See 2.0 Spec chapter 8.5.3.3 for detail.
+ */
+ if (udc->ep0_state == DATA_STATE_XMIT)
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+
} else {
/* No data phase, IN status from gadget */
udc->ep0_dir = USB_DIR_IN;
@@ -1520,9 +1528,8 @@
switch (udc->ep0_state) {
case DATA_STATE_XMIT:
- /* receive status phase */
- if (ep0_prime_status(udc, EP_DIR_OUT))
- ep0stall(udc);
+ /* already primed at setup_received_irq */
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
break;
case DATA_STATE_RECV:
/* send status phase */
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 331cd67..a85eaf4 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -161,7 +161,7 @@
static struct ffs_data *gfs_ffs_data;
static unsigned long gfs_registered;
-static int gfs_init(void)
+static int __init gfs_init(void)
{
ENTER();
@@ -169,7 +169,7 @@
}
module_init(gfs_init);
-static void gfs_exit(void)
+static void __exit gfs_exit(void)
{
ENTER();
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 69295ba..105b206 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -340,7 +340,7 @@
/* currently we allocate TX FIFOs for all possible endpoints,
* and assume that they are all the same size. */
- for (ep = 0; ep <= 15; ep++) {
+ for (ep = 1; ep <= 15; ep++) {
val = addr;
val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
addr += size;
@@ -741,7 +741,7 @@
/* write size / packets */
writel(epsize, hsotg->regs + epsize_reg);
- if (using_dma(hsotg)) {
+ if (using_dma(hsotg) && !continuing) {
unsigned int dma_reg;
/* write DMA address to control register, buffer already
@@ -1696,10 +1696,12 @@
reg |= mpsval;
writel(reg, regs + S3C_DIEPCTL(ep));
- reg = readl(regs + S3C_DOEPCTL(ep));
- reg &= ~S3C_DxEPCTL_MPS_MASK;
- reg |= mpsval;
- writel(reg, regs + S3C_DOEPCTL(ep));
+ if (ep) {
+ reg = readl(regs + S3C_DOEPCTL(ep));
+ reg &= ~S3C_DxEPCTL_MPS_MASK;
+ reg |= mpsval;
+ writel(reg, regs + S3C_DOEPCTL(ep));
+ }
return;
@@ -1919,7 +1921,8 @@
ints & S3C_DIEPMSK_TxFIFOEmpty) {
dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
__func__, idx);
- s3c_hsotg_trytx(hsotg, hs_ep);
+ if (!using_dma(hsotg))
+ s3c_hsotg_trytx(hsotg, hs_ep);
}
}
}
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 56da49f..2fa9865 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -264,8 +264,8 @@
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
- usb_gadget_udc_stop(udc->gadget, udc->driver);
usb_gadget_disconnect(udc->gadget);
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
}
@@ -411,8 +411,12 @@
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
if (sysfs_streq(buf, "connect")) {
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
+ if (udc_is_newstyle(udc))
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
usb_gadget_disconnect(udc->gadget);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index d776adb..0cdf89d 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -543,11 +543,11 @@
return ret;
}
+/* called with queue->irqlock held.. */
static struct uvc_buffer *
uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf)
{
struct uvc_buffer *nextbuf;
- unsigned long flags;
if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
buf->buf.length != buf->buf.bytesused) {
@@ -556,14 +556,12 @@
return buf;
}
- spin_lock_irqsave(&queue->irqlock, flags);
list_del(&buf->queue);
if (!list_empty(&queue->irqqueue))
nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
queue);
else
nextbuf = NULL;
- spin_unlock_irqrestore(&queue->irqlock, flags);
buf->buf.sequence = queue->sequence++;
do_gettimeofday(&buf->buf.timestamp);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 3e73451..d0a84bd 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -218,6 +218,9 @@
u32 portsc;
struct usb_hcd *hcd = ehci_to_hcd(ehci);
void __iomem *non_ehci = hcd->regs;
+ struct fsl_usb2_platform_data *pdata;
+
+ pdata = hcd->self.controller->platform_data;
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -234,7 +237,9 @@
/* fall through */
case FSL_USB2_PHY_UTMI:
/* enable UTMI PHY */
- setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
+ if (pdata->have_sysif_regs)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL,
+ CTRL_UTMI_PHY_EN);
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 806cc95..4a3bc5b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -858,8 +858,13 @@
goto dead;
}
+ /*
+ * We don't use STS_FLR, but some controllers don't like it to
+ * remain on, so mask it out along with the other status bits.
+ */
+ masked_status = status & (INTR_MASK | STS_FLR);
+
/* Shared IRQ? */
- masked_status = status & INTR_MASK;
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
spin_unlock(&ehci->lock);
return IRQ_NONE;
@@ -910,7 +915,7 @@
pcd_status = status;
/* resume root hub? */
- if (!(cmd & CMD_RUN))
+ if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
/* get per-port change detect bits */
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index bba9850..5c78f9e 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -42,6 +42,7 @@
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -191,6 +192,19 @@
}
}
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_request_one(pdata->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_request_one(pdata->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -237,6 +251,19 @@
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
+ if (pdata->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_set_value(pdata->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_set_value(pdata->reset_gpio_port[1], 1);
+ }
+
return 0;
err_add_hcd:
@@ -259,8 +286,9 @@
*/
static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;
usb_remove_hcd(hcd);
disable_put_regulator(dev->platform_data);
@@ -269,6 +297,13 @@
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
+ if (pdata->phy_reset) {
+ if (gpio_is_valid(pdata->reset_gpio_port[0]))
+ gpio_free(pdata->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->reset_gpio_port[1]))
+ gpio_free(pdata->reset_gpio_port[1]);
+ }
return 0;
}
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 73544bd..8618336 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -731,7 +731,6 @@
err = -ENODEV;
goto fail;
}
- set_irq_flags(irq, IRQF_VALID);
#ifdef CONFIG_USB_OTG_UTILS
if (pdata->operating_mode == TEGRA_USB_OTG) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 09f597a..13ebeca 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -94,7 +94,7 @@
/*-------------------------------------------------------------------------*/
-static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -108,7 +108,7 @@
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-static int usb_hcd_at91_probe(const struct hc_driver *driver,
+static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
@@ -203,7 +203,7 @@
* context, "rmmod" or something similar.
*
*/
-static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
@@ -545,7 +545,7 @@
/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata;
int i;
@@ -620,7 +620,7 @@
return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
-static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
@@ -696,7 +696,7 @@
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
- .remove = ohci_hcd_at91_drv_remove,
+ .remove = __devexit_p(ohci_hcd_at91_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 959145b..9dcb68f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -423,7 +423,7 @@
unsigned i;
unsigned size = max;
- sg = kmalloc(nents * sizeof *sg, GFP_KERNEL);
+ sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
sg_init_table(sg, nents);
@@ -904,6 +904,9 @@
struct ctrl_ctx context;
int i;
+ if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen)
+ return -EOPNOTSUPP;
+
spin_lock_init(&context.lock);
context.dev = dev;
init_completion(&context.complete);
@@ -1981,8 +1984,6 @@
/* queued control messaging */
case 10:
- if (param->sglen == 0)
- break;
retval = 0;
dev_info(&intf->dev,
"TEST 10: queue %d control calls, %d times\n",
@@ -2276,6 +2277,8 @@
if (status < 0) {
WARNING(dev, "couldn't get endpoints, %d\n",
status);
+ kfree(dev->buf);
+ kfree(dev);
return status;
}
/* may find bulk or ISO pipes */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 897edda..7020146 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -99,9 +99,7 @@
usb_put_dev(dev->udev);
if (dev->cntl_urb) {
usb_kill_urb(dev->cntl_urb);
- if (dev->cntl_req)
- usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
- dev->cntl_req, dev->cntl_urb->setup_dma);
+ kfree(dev->cntl_req);
if (dev->cntl_buffer)
usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
dev->cntl_buffer, dev->cntl_urb->transfer_dma);
@@ -234,9 +232,7 @@
}
/* allocate buffer for control req */
- dev->cntl_req = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
- GFP_KERNEL,
- &dev->cntl_urb->setup_dma);
+ dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
if (!dev->cntl_req) {
err("Could not allocate cntl_req");
goto error;
@@ -286,7 +282,7 @@
usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr),
dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt,
dev, 1);
- dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
retval = -EIO;
err("Could not submitting URB");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0f8b829..66aaccf 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -137,6 +137,9 @@
int i = 0;
u8 r;
u8 power;
+ int ret;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -154,15 +157,22 @@
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return musb_readb(addr, MUSB_ULPI_REG_DATA);
+ ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
@@ -171,6 +181,9 @@
int i = 0;
u8 r = 0;
u8 power;
+ int ret = 0;
+
+ pm_runtime_get_sync(phy->io_dev);
/* Make sure the transceiver is not in low power mode */
power = musb_readb(addr, MUSB_POWER);
@@ -184,15 +197,20 @@
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
& MUSB_ULPI_REG_CMPLT)) {
i++;
- if (i == 10000)
- return -ETIMEDOUT;
+ if (i == 10000) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
}
r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
r &= ~MUSB_ULPI_REG_CMPLT;
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
- return 0;
+out:
+ pm_runtime_put(phy->io_dev);
+
+ return ret;
}
#else
#define musb_ulpi_read NULL
@@ -1904,14 +1922,17 @@
if (!musb->isr) {
status = -ENODEV;
- goto fail3;
+ goto fail2;
}
if (!musb->xceiv->io_ops) {
+ musb->xceiv->io_dev = musb->controller;
musb->xceiv->io_priv = musb->mregs;
musb->xceiv->io_ops = &musb_ulpi_access;
}
+ pm_runtime_get_sync(musb->controller);
+
#ifndef CONFIG_MUSB_PIO_ONLY
if (use_dma && dev->dma_mask) {
struct dma_controller *c;
@@ -2023,6 +2044,8 @@
goto fail5;
#endif
+ pm_runtime_put(musb->controller);
+
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
switch (musb->board_mode) {
@@ -2047,6 +2070,9 @@
musb_gadget_cleanup(musb);
fail3:
+ pm_runtime_put_sync(musb->controller);
+
+fail2:
if (musb->irq_wake)
device_init_wakeup(dev, 0);
musb_platform_exit(musb);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 79cb0af..ef8d744 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2098,7 +2098,7 @@
}
/* turn off DMA requests, discard state, stop polling ... */
- if (is_in) {
+ if (ep->epnum && is_in) {
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2ae0bb3..c7785e8 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -282,7 +282,8 @@
static int omap2430_musb_init(struct musb *musb)
{
- u32 l, status = 0;
+ u32 l;
+ int status = 0;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct omap_musb_board_data *data = plat->board_data;
@@ -301,7 +302,7 @@
status = pm_runtime_get_sync(dev);
if (status < 0) {
- dev_err(dev, "pm_runtime_get_sync FAILED");
+ dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
goto err1;
}
@@ -333,6 +334,7 @@
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+ pm_runtime_put_noidle(musb->controller);
return 0;
err1:
@@ -452,14 +454,14 @@
goto err2;
}
+ pm_runtime_enable(&pdev->dev);
+
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err2;
}
- pm_runtime_enable(&pdev->dev);
-
return 0;
err2:
@@ -478,7 +480,6 @@
platform_device_del(glue->musb);
platform_device_put(glue->musb);
- pm_runtime_put(&pdev->dev);
kfree(glue);
return 0;
@@ -491,11 +492,13 @@
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- musb->context.otg_interfsel = musb_readl(musb->mregs,
- OTG_INTERFSEL);
+ if (musb) {
+ musb->context.otg_interfsel = musb_readl(musb->mregs,
+ OTG_INTERFSEL);
- omap2430_low_level_exit(musb);
- usb_phy_set_suspend(musb->xceiv, 1);
+ omap2430_low_level_exit(musb);
+ usb_phy_set_suspend(musb->xceiv, 1);
+ }
return 0;
}
@@ -505,11 +508,13 @@
struct omap2430_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- omap2430_low_level_init(musb);
- musb_writel(musb->mregs, OTG_INTERFSEL,
- musb->context.otg_interfsel);
+ if (musb) {
+ omap2430_low_level_init(musb);
+ musb_writel(musb->mregs, OTG_INTERFSEL,
+ musb->context.otg_interfsel);
- usb_phy_set_suspend(musb->xceiv, 0);
+ usb_phy_set_suspend(musb->xceiv, 0);
+ }
return 0;
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 0310e2d..ec30f95 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -287,7 +287,8 @@
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
for (i = 0; i < length; i++)
@@ -340,12 +341,14 @@
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, 0x0000,
- port_priv->bInterfaceNumber, buf, size, 300);
+ port_priv->bInterfaceNumber, buf, size,
+ USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
- port_priv->bInterfaceNumber, NULL, 0, 300);
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index fdd5aa2..8c8bf80 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -221,7 +221,7 @@
};
/* 'blacklist' of interfaces not served by this driver */
-static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 };
static const struct sierra_iface_info direct_ip_interface_blacklist = {
.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
.ifaceinfo = direct_ip_non_serial_ifaces,
@@ -289,7 +289,6 @@
{ USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
{ USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
- { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
@@ -299,6 +298,9 @@
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 66797e9..810c90a 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -645,7 +645,8 @@
dev_err(dev, "NEEP: URB error %d\n", urb->status);
}
result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result < 0) {
+ if (result < 0 && result != -ENODEV && result != -EPERM) {
+ /* ignoring unrecoverable errors */
dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
result);
goto error;
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
index a269937..8cb71bb 100644
--- a/drivers/uwb/neh.c
+++ b/drivers/uwb/neh.c
@@ -107,6 +107,7 @@
u8 evt_type;
__le16 evt;
u8 context;
+ u8 completed;
uwb_rc_cmd_cb_f cb;
void *arg;
@@ -409,6 +410,7 @@
struct device *dev = &rc->uwb_dev.dev;
struct uwb_rc_neh *neh;
struct uwb_rceb *notif;
+ unsigned long flags;
if (rceb->bEventContext == 0) {
notif = kmalloc(size, GFP_ATOMIC);
@@ -422,7 +424,11 @@
} else {
neh = uwb_rc_neh_lookup(rc, rceb);
if (neh) {
- del_timer_sync(&neh->timer);
+ spin_lock_irqsave(&rc->neh_lock, flags);
+ /* to guard against a timeout */
+ neh->completed = 1;
+ del_timer(&neh->timer);
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
uwb_rc_neh_cb(neh, rceb, size);
} else
dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n",
@@ -568,6 +574,10 @@
unsigned long flags;
spin_lock_irqsave(&rc->neh_lock, flags);
+ if (neh->completed) {
+ spin_unlock_irqrestore(&rc->neh_lock, flags);
+ return;
+ }
if (neh->context)
__uwb_rc_neh_rm(rc, neh);
else
diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c
index fc9a1d7..3de00d9 100644
--- a/drivers/vhost/test.c
+++ b/drivers/vhost/test.c
@@ -155,7 +155,7 @@
vhost_test_stop(n, &private);
vhost_test_flush(n);
- vhost_dev_cleanup(&n->dev);
+ vhost_dev_cleanup(&n->dev, false);
/* We do an extra flush before freeing memory,
* since jobs can re-queue themselves. */
vhost_test_flush(n);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 05f0a80..c2d05a8 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -28,6 +28,13 @@
#include <linux/slab.h>
#include <linux/module.h>
+/*
+ * Balloon device works in 4K page units. So each page is pointed to by
+ * multiple balloon pages. All memory counters in this driver are in balloon
+ * page units.
+ */
+#define VIRTIO_BALLOON_PAGES_PER_PAGE (PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT)
+
struct virtio_balloon
{
struct virtio_device *vdev;
@@ -42,8 +49,13 @@
/* Waiting for host to ack the pages we released. */
struct completion acked;
- /* The pages we've told the Host we're not using. */
+ /* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
+ /*
+ * The pages we've told the Host we're not using.
+ * Each page on this list adds VIRTIO_BALLOON_PAGES_PER_PAGE
+ * to num_pages above.
+ */
struct list_head pages;
/* The array of pfns we tell the Host about. */
@@ -66,7 +78,13 @@
BUILD_BUG_ON(PAGE_SHIFT < VIRTIO_BALLOON_PFN_SHIFT);
/* Convert pfn from Linux page size to balloon page size. */
- return pfn >> (PAGE_SHIFT - VIRTIO_BALLOON_PFN_SHIFT);
+ return pfn * VIRTIO_BALLOON_PAGES_PER_PAGE;
+}
+
+static struct page *balloon_pfn_to_page(u32 pfn)
+{
+ BUG_ON(pfn % VIRTIO_BALLOON_PAGES_PER_PAGE);
+ return pfn_to_page(pfn / VIRTIO_BALLOON_PAGES_PER_PAGE);
}
static void balloon_ack(struct virtqueue *vq)
@@ -96,12 +114,23 @@
wait_for_completion(&vb->acked);
}
+static void set_page_pfns(u32 pfns[], struct page *page)
+{
+ unsigned int i;
+
+ /* Set balloon pfns pointing at this page.
+ * Note that the first pfn points at start of the page. */
+ for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++)
+ pfns[i] = page_to_balloon_pfn(page) + i;
+}
+
static void fill_balloon(struct virtio_balloon *vb, size_t num)
{
/* We can only do one array worth at a time. */
num = min(num, ARRAY_SIZE(vb->pfns));
- for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+ for (vb->num_pfns = 0; vb->num_pfns < num;
+ vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY |
__GFP_NOMEMALLOC | __GFP_NOWARN);
if (!page) {
@@ -113,9 +142,9 @@
msleep(200);
break;
}
- vb->pfns[vb->num_pfns] = page_to_balloon_pfn(page);
+ set_page_pfns(vb->pfns + vb->num_pfns, page);
+ vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
totalram_pages--;
- vb->num_pages++;
list_add(&page->lru, &vb->pages);
}
@@ -130,8 +159,9 @@
{
unsigned int i;
- for (i = 0; i < num; i++) {
- __free_page(pfn_to_page(pfns[i]));
+ /* Find pfns pointing at start of each page, get pages and free them. */
+ for (i = 0; i < num; i += VIRTIO_BALLOON_PAGES_PER_PAGE) {
+ __free_page(balloon_pfn_to_page(pfns[i]));
totalram_pages++;
}
}
@@ -143,11 +173,12 @@
/* We can only do one array worth at a time. */
num = min(num, ARRAY_SIZE(vb->pfns));
- for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+ for (vb->num_pfns = 0; vb->num_pfns < num;
+ vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
page = list_first_entry(&vb->pages, struct page, lru);
list_del(&page->lru);
- vb->pfns[vb->num_pfns] = page_to_balloon_pfn(page);
- vb->num_pages--;
+ set_page_pfns(vb->pfns + vb->num_pfns, page);
+ vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
}
/*
@@ -234,11 +265,14 @@
static inline s64 towards_target(struct virtio_balloon *vb)
{
- u32 v;
+ __le32 v;
+ s64 target;
+
vb->vdev->config->get(vb->vdev,
offsetof(struct virtio_balloon_config, num_pages),
&v, sizeof(v));
- return (s64)v - vb->num_pages;
+ target = le32_to_cpu(v);
+ return target - vb->num_pages;
}
static void update_balloon_size(struct virtio_balloon *vb)
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 99d8151..1ffd03b 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -722,7 +722,7 @@
vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND;
if (use_ptemod)
- vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP;
+ vma->vm_flags |= VM_DONTCOPY;
vma->vm_private_data = map;
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index b4d4eac..f100ce2 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -1029,6 +1029,7 @@
int i;
unsigned int max_nr_glist_frames, nr_glist_frames;
unsigned int nr_init_grefs;
+ int ret;
nr_grant_frames = 1;
boot_max_nr_grant_frames = __max_nr_grant_frames();
@@ -1047,12 +1048,16 @@
nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
for (i = 0; i < nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
- if (gnttab_list[i] == NULL)
+ if (gnttab_list[i] == NULL) {
+ ret = -ENOMEM;
goto ini_nomem;
+ }
}
- if (gnttab_resume() < 0)
- return -ENODEV;
+ if (gnttab_resume() < 0) {
+ ret = -ENODEV;
+ goto ini_nomem;
+ }
nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME;
@@ -1070,7 +1075,7 @@
for (i--; i >= 0; i--)
free_page((unsigned long)gnttab_list[i]);
kfree(gnttab_list);
- return -ENOMEM;
+ return ret;
}
EXPORT_SYMBOL_GPL(gnttab_init);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 9e14ae6..412b96c 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -132,6 +132,7 @@
err = dpm_suspend_end(PMSG_FREEZE);
if (err) {
printk(KERN_ERR "dpm_suspend_end failed: %d\n", err);
+ si.cancelled = 0;
goto out_resume;
}
diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c
index f20c5f1..a31b54d 100644
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -135,7 +135,7 @@
return xenbus_read_otherend_details(xendev, "backend-id", "backend");
}
-static int is_device_connecting(struct device *dev, void *data)
+static int is_device_connecting(struct device *dev, void *data, bool ignore_nonessential)
{
struct xenbus_device *xendev = to_xenbus_device(dev);
struct device_driver *drv = data;
@@ -152,16 +152,41 @@
if (drv && (dev->driver != drv))
return 0;
+ if (ignore_nonessential) {
+ /* With older QEMU, for PVonHVM guests the guest config files
+ * could contain: vfb = [ 'vnc=1, vnclisten=0.0.0.0']
+ * which is nonsensical as there is no PV FB (there can be
+ * a PVKB) running as HVM guest. */
+
+ if ((strncmp(xendev->nodename, "device/vkbd", 11) == 0))
+ return 0;
+
+ if ((strncmp(xendev->nodename, "device/vfb", 10) == 0))
+ return 0;
+ }
xendrv = to_xenbus_driver(dev->driver);
return (xendev->state < XenbusStateConnected ||
(xendev->state == XenbusStateConnected &&
xendrv->is_ready && !xendrv->is_ready(xendev)));
}
+static int essential_device_connecting(struct device *dev, void *data)
+{
+ return is_device_connecting(dev, data, true /* ignore PV[KBB+FB] */);
+}
+static int non_essential_device_connecting(struct device *dev, void *data)
+{
+ return is_device_connecting(dev, data, false);
+}
-static int exists_connecting_device(struct device_driver *drv)
+static int exists_essential_connecting_device(struct device_driver *drv)
{
return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
- is_device_connecting);
+ essential_device_connecting);
+}
+static int exists_non_essential_connecting_device(struct device_driver *drv)
+{
+ return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+ non_essential_device_connecting);
}
static int print_device_status(struct device *dev, void *data)
@@ -192,6 +217,23 @@
/* We only wait for device setup after most initcalls have run. */
static int ready_to_wait_for_devices;
+static bool wait_loop(unsigned long start, unsigned int max_delay,
+ unsigned int *seconds_waited)
+{
+ if (time_after(jiffies, start + (*seconds_waited+5)*HZ)) {
+ if (!*seconds_waited)
+ printk(KERN_WARNING "XENBUS: Waiting for "
+ "devices to initialise: ");
+ *seconds_waited += 5;
+ printk("%us...", max_delay - *seconds_waited);
+ if (*seconds_waited == max_delay)
+ return true;
+ }
+
+ schedule_timeout_interruptible(HZ/10);
+
+ return false;
+}
/*
* On a 5-minute timeout, wait for all devices currently configured. We need
* to do this to guarantee that the filesystems and / or network devices
@@ -215,19 +257,14 @@
if (!ready_to_wait_for_devices || !xen_domain())
return;
- while (exists_connecting_device(drv)) {
- if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
- if (!seconds_waited)
- printk(KERN_WARNING "XENBUS: Waiting for "
- "devices to initialise: ");
- seconds_waited += 5;
- printk("%us...", 300 - seconds_waited);
- if (seconds_waited == 300)
- break;
- }
+ while (exists_non_essential_connecting_device(drv))
+ if (wait_loop(start, 30, &seconds_waited))
+ break;
- schedule_timeout_interruptible(HZ/10);
- }
+ /* Skips PVKB and PVFB check.*/
+ while (exists_essential_connecting_device(drv))
+ if (wait_loop(start, 270, &seconds_waited))
+ break;
if (seconds_waited)
printk("\n");
diff --git a/fs/aio.c b/fs/aio.c
index da88760..67a6db3 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -93,9 +93,8 @@
put_page(info->ring_pages[i]);
if (info->mmap_size) {
- down_write(&ctx->mm->mmap_sem);
- do_munmap(ctx->mm, info->mmap_base, info->mmap_size);
- up_write(&ctx->mm->mmap_sem);
+ BUG_ON(ctx->mm != current->mm);
+ vm_munmap(info->mmap_base, info->mmap_size);
}
if (info->ring_pages && info->ring_pages != info->internal_pages)
@@ -389,6 +388,17 @@
"exit_aio:ioctx still alive: %d %d %d\n",
atomic_read(&ctx->users), ctx->dead,
ctx->reqs_active);
+ /*
+ * We don't need to bother with munmap() here -
+ * exit_mmap(mm) is coming and it'll unmap everything.
+ * Since aio_free_ring() uses non-zero ->mmap_size
+ * as indicator that it needs to unmap the area,
+ * just set it to 0; aio_free_ring() is the only
+ * place that uses ->mmap_size, so it's safe.
+ * That way we get all munmap done to current->mm -
+ * all other callers have ctx->mm == current->mm.
+ */
+ ctx->ring_info.mmap_size = 0;
put_ioctx(ctx);
}
}
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index 2eb12f1..d146e18 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -50,9 +50,7 @@
end = PAGE_ALIGN(end);
if (end > start) {
unsigned long addr;
- down_write(¤t->mm->mmap_sem);
- addr = do_brk(start, end - start);
- up_write(¤t->mm->mmap_sem);
+ addr = vm_brk(start, end - start);
if (BAD_ADDR(addr))
return addr;
}
@@ -280,9 +278,7 @@
pos = 32;
map_size = ex.a_text+ex.a_data;
#endif
- down_write(¤t->mm->mmap_sem);
- error = do_brk(text_addr & PAGE_MASK, map_size);
- up_write(¤t->mm->mmap_sem);
+ error = vm_brk(text_addr & PAGE_MASK, map_size);
if (error != (text_addr & PAGE_MASK)) {
send_sig(SIGKILL, current, 0);
return error;
@@ -313,9 +309,7 @@
if (!bprm->file->f_op->mmap||((fd_offset & ~PAGE_MASK) != 0)) {
loff_t pos = fd_offset;
- down_write(¤t->mm->mmap_sem);
- do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
- up_write(¤t->mm->mmap_sem);
+ vm_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
bprm->file->f_op->read(bprm->file,
(char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
@@ -325,24 +319,20 @@
goto beyond_if;
}
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
+ error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset);
- up_write(¤t->mm->mmap_sem);
if (error != N_TXTADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
}
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
+ error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
fd_offset + ex.a_text);
- up_write(¤t->mm->mmap_sem);
if (error != N_DATADDR(ex)) {
send_sig(SIGKILL, current, 0);
return error;
@@ -412,9 +402,7 @@
"N_TXTOFF is not page aligned. Please convert library: %s\n",
file->f_path.dentry->d_name.name);
}
- down_write(¤t->mm->mmap_sem);
- do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
- up_write(¤t->mm->mmap_sem);
+ vm_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
file->f_op->read(file, (char __user *)start_addr,
ex.a_text + ex.a_data, &pos);
@@ -425,12 +413,10 @@
goto out;
}
/* Now use mmap to map the library into memory. */
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(file, start_addr, ex.a_text + ex.a_data,
+ error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
N_TXTOFF(ex));
- up_write(¤t->mm->mmap_sem);
retval = error;
if (error != start_addr)
goto out;
@@ -438,9 +424,7 @@
len = PAGE_ALIGN(ex.a_text + ex.a_data);
bss = ex.a_text + ex.a_data + ex.a_bss;
if (bss > len) {
- down_write(¤t->mm->mmap_sem);
- error = do_brk(start_addr + len, bss - len);
- up_write(¤t->mm->mmap_sem);
+ error = vm_brk(start_addr + len, bss - len);
retval = error;
if (error != start_addr + len)
goto out;
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 48ffb3d..16f7354 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -82,9 +82,7 @@
end = ELF_PAGEALIGN(end);
if (end > start) {
unsigned long addr;
- down_write(¤t->mm->mmap_sem);
- addr = do_brk(start, end - start);
- up_write(¤t->mm->mmap_sem);
+ addr = vm_brk(start, end - start);
if (BAD_ADDR(addr))
return addr;
}
@@ -514,9 +512,7 @@
elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1);
/* Map the last of the bss segment */
- down_write(¤t->mm->mmap_sem);
- error = do_brk(elf_bss, last_bss - elf_bss);
- up_write(¤t->mm->mmap_sem);
+ error = vm_brk(elf_bss, last_bss - elf_bss);
if (BAD_ADDR(error))
goto out_close;
}
@@ -962,10 +958,8 @@
and some applications "depend" upon this behavior.
Since we do not have the power to recompile these, we
emulate the SVr4 behavior. Sigh. */
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(NULL, 0, PAGE_SIZE, PROT_READ | PROT_EXEC,
+ error = vm_mmap(NULL, 0, PAGE_SIZE, PROT_READ | PROT_EXEC,
MAP_FIXED | MAP_PRIVATE, 0);
- up_write(¤t->mm->mmap_sem);
}
#ifdef ELF_PLAT_INIT
@@ -1050,8 +1044,7 @@
eppnt++;
/* Now use mmap to map the library into memory. */
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(file,
+ error = vm_mmap(file,
ELF_PAGESTART(eppnt->p_vaddr),
(eppnt->p_filesz +
ELF_PAGEOFFSET(eppnt->p_vaddr)),
@@ -1059,7 +1052,6 @@
MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
(eppnt->p_offset -
ELF_PAGEOFFSET(eppnt->p_vaddr)));
- up_write(¤t->mm->mmap_sem);
if (error != ELF_PAGESTART(eppnt->p_vaddr))
goto out_free_ph;
@@ -1072,11 +1064,8 @@
len = ELF_PAGESTART(eppnt->p_filesz + eppnt->p_vaddr +
ELF_MIN_ALIGN - 1);
bss = eppnt->p_memsz + eppnt->p_vaddr;
- if (bss > len) {
- down_write(¤t->mm->mmap_sem);
- do_brk(len, bss - len);
- up_write(¤t->mm->mmap_sem);
- }
+ if (bss > len)
+ vm_brk(len, bss - len);
error = 0;
out_free_ph:
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 9bd5612..d390a0f 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -390,21 +390,17 @@
(executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC))
stack_prot |= PROT_EXEC;
- down_write(¤t->mm->mmap_sem);
- current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot,
+ current->mm->start_brk = vm_mmap(NULL, 0, stack_size, stack_prot,
MAP_PRIVATE | MAP_ANONYMOUS |
MAP_UNINITIALIZED | MAP_GROWSDOWN,
0);
if (IS_ERR_VALUE(current->mm->start_brk)) {
- up_write(¤t->mm->mmap_sem);
retval = current->mm->start_brk;
current->mm->start_brk = 0;
goto error_kill;
}
- up_write(¤t->mm->mmap_sem);
-
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
current->mm->context.end_brk +=
@@ -955,10 +951,8 @@
if (params->flags & ELF_FDPIC_FLAG_EXECUTABLE)
mflags |= MAP_EXECUTABLE;
- down_write(&mm->mmap_sem);
- maddr = do_mmap(NULL, load_addr, top - base,
+ maddr = vm_mmap(NULL, load_addr, top - base,
PROT_READ | PROT_WRITE | PROT_EXEC, mflags, 0);
- up_write(&mm->mmap_sem);
if (IS_ERR_VALUE(maddr))
return (int) maddr;
@@ -1096,10 +1090,8 @@
/* create the mapping */
disp = phdr->p_vaddr & ~PAGE_MASK;
- down_write(&mm->mmap_sem);
- maddr = do_mmap(file, maddr, phdr->p_memsz + disp, prot, flags,
+ maddr = vm_mmap(file, maddr, phdr->p_memsz + disp, prot, flags,
phdr->p_offset - disp);
- up_write(&mm->mmap_sem);
kdebug("mmap[%d] <file> sz=%lx pr=%x fl=%x of=%lx --> %08lx",
loop, phdr->p_memsz + disp, prot, flags,
@@ -1143,10 +1135,8 @@
unsigned long xmaddr;
flags |= MAP_FIXED | MAP_ANONYMOUS;
- down_write(&mm->mmap_sem);
- xmaddr = do_mmap(NULL, xaddr, excess - excess1,
+ xmaddr = vm_mmap(NULL, xaddr, excess - excess1,
prot, flags, 0);
- up_write(&mm->mmap_sem);
kdebug("mmap[%d] <anon>"
" ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx",
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 024d20e..6b2daf9 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -542,10 +542,8 @@
*/
DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n");
- down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC,
+ textpos = vm_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_EXECUTABLE, 0);
- up_write(¤t->mm->mmap_sem);
if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
textpos = (unsigned long) -ENOMEM;
@@ -556,10 +554,8 @@
len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- realdatastart = do_mmap(0, 0, len,
+ realdatastart = vm_mmap(0, 0, len,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
- up_write(¤t->mm->mmap_sem);
if (realdatastart == 0 || IS_ERR_VALUE(realdatastart)) {
if (!realdatastart)
@@ -603,10 +599,8 @@
len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
len = PAGE_ALIGN(len);
- down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(0, 0, len,
+ textpos = vm_mmap(0, 0, len,
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
- up_write(¤t->mm->mmap_sem);
if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index e4fc746..4517aaf 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -147,10 +147,8 @@
code_size = SOM_PAGEALIGN(hpuxhdr->exec_tsize);
current->mm->start_code = code_start;
current->mm->end_code = code_start + code_size;
- down_write(¤t->mm->mmap_sem);
- retval = do_mmap(file, code_start, code_size, prot,
+ retval = vm_mmap(file, code_start, code_size, prot,
flags, SOM_PAGESTART(hpuxhdr->exec_tfile));
- up_write(¤t->mm->mmap_sem);
if (retval < 0 && retval > -1024)
goto out;
@@ -158,20 +156,16 @@
data_size = SOM_PAGEALIGN(hpuxhdr->exec_dsize);
current->mm->start_data = data_start;
current->mm->end_data = bss_start = data_start + data_size;
- down_write(¤t->mm->mmap_sem);
- retval = do_mmap(file, data_start, data_size,
+ retval = vm_mmap(file, data_start, data_size,
prot | PROT_WRITE, flags,
SOM_PAGESTART(hpuxhdr->exec_dfile));
- up_write(¤t->mm->mmap_sem);
if (retval < 0 && retval > -1024)
goto out;
som_brk = bss_start + SOM_PAGEALIGN(hpuxhdr->exec_bsize);
current->mm->start_brk = current->mm->brk = som_brk;
- down_write(¤t->mm->mmap_sem);
- retval = do_mmap(NULL, bss_start, som_brk - bss_start,
+ retval = vm_mmap(NULL, bss_start, som_brk - bss_start,
prot | PROT_WRITE, MAP_FIXED | MAP_PRIVATE, 0);
- up_write(¤t->mm->mmap_sem);
if (retval > 0 || retval < -1024)
retval = 0;
out:
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 5b8ef8e..3f65a81 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2166,7 +2166,7 @@
static inline bool btrfs_root_readonly(struct btrfs_root *root)
{
- return root->root_item.flags & BTRFS_ROOT_SUBVOL_RDONLY;
+ return (root->root_item.flags & cpu_to_le64(BTRFS_ROOT_SUBVOL_RDONLY)) != 0;
}
/* struct btrfs_root_backup */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d81e933..f31dc9a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -109,6 +109,8 @@
/* Options which could be blank */
Opt_blank_pass,
+ Opt_blank_user,
+ Opt_blank_ip,
Opt_err
};
@@ -183,11 +185,15 @@
{ Opt_wsize, "wsize=%s" },
{ Opt_actimeo, "actimeo=%s" },
+ { Opt_blank_user, "user=" },
+ { Opt_blank_user, "username=" },
{ Opt_user, "user=%s" },
{ Opt_user, "username=%s" },
{ Opt_blank_pass, "pass=" },
{ Opt_pass, "pass=%s" },
{ Opt_pass, "password=%s" },
+ { Opt_blank_ip, "ip=" },
+ { Opt_blank_ip, "addr=" },
{ Opt_ip, "ip=%s" },
{ Opt_ip, "addr=%s" },
{ Opt_unc, "unc=%s" },
@@ -1117,7 +1123,7 @@
string = match_strdup(args);
if (string == NULL)
return -ENOMEM;
- rc = kstrtoul(string, 10, option);
+ rc = kstrtoul(string, 0, option);
kfree(string);
return rc;
@@ -1534,15 +1540,17 @@
/* String Arguments */
+ case Opt_blank_user:
+ /* null user, ie. anonymous authentication */
+ vol->nullauth = 1;
+ vol->username = NULL;
+ break;
case Opt_user:
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- if (!*string) {
- /* null user, ie. anonymous authentication */
- vol->nullauth = 1;
- } else if (strnlen(string, MAX_USERNAME_SIZE) >
+ if (strnlen(string, MAX_USERNAME_SIZE) >
MAX_USERNAME_SIZE) {
printk(KERN_WARNING "CIFS: username too long\n");
goto cifs_parse_mount_err;
@@ -1611,14 +1619,15 @@
}
vol->password[j] = '\0';
break;
+ case Opt_blank_ip:
+ vol->UNCip = NULL;
+ break;
case Opt_ip:
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- if (!*string) {
- vol->UNCip = NULL;
- } else if (strnlen(string, INET6_ADDRSTRLEN) >
+ if (strnlen(string, INET6_ADDRSTRLEN) >
INET6_ADDRSTRLEN) {
printk(KERN_WARNING "CIFS: ip address "
"too long\n");
@@ -1636,12 +1645,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: invalid path to "
- "network resource\n");
- goto cifs_parse_mount_err;
- }
-
temp_len = strnlen(string, 300);
if (temp_len == 300) {
printk(KERN_WARNING "CIFS: UNC name too long\n");
@@ -1670,11 +1673,7 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: invalid domain"
- " name\n");
- goto cifs_parse_mount_err;
- } else if (strnlen(string, 256) == 256) {
+ if (strnlen(string, 256) == 256) {
printk(KERN_WARNING "CIFS: domain name too"
" long\n");
goto cifs_parse_mount_err;
@@ -1693,11 +1692,7 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: srcaddr value not"
- " specified\n");
- goto cifs_parse_mount_err;
- } else if (!cifs_convert_address(
+ if (!cifs_convert_address(
(struct sockaddr *)&vol->srcaddr,
string, strlen(string))) {
printk(KERN_WARNING "CIFS: Could not parse"
@@ -1710,11 +1705,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: Invalid path"
- " prefix\n");
- goto cifs_parse_mount_err;
- }
temp_len = strnlen(string, 1024);
if (string[0] != '/')
temp_len++; /* missing leading slash */
@@ -1742,11 +1732,7 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: Invalid iocharset"
- " specified\n");
- goto cifs_parse_mount_err;
- } else if (strnlen(string, 1024) >= 65) {
+ if (strnlen(string, 1024) >= 65) {
printk(KERN_WARNING "CIFS: iocharset name "
"too long.\n");
goto cifs_parse_mount_err;
@@ -1771,11 +1757,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: No socket option"
- " specified\n");
- goto cifs_parse_mount_err;
- }
if (strnicmp(string, "TCP_NODELAY", 11) == 0)
vol->sockopt_tcp_nodelay = 1;
break;
@@ -1784,12 +1765,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: Invalid (empty)"
- " netbiosname\n");
- break;
- }
-
memset(vol->source_rfc1001_name, 0x20,
RFC1001_NAME_LEN);
/*
@@ -1817,11 +1792,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: Empty server"
- " netbiosname specified\n");
- break;
- }
/* last byte, type, is 0x20 for servr type */
memset(vol->target_rfc1001_name, 0x20,
RFC1001_NAME_LEN_WITH_NULL);
@@ -1848,12 +1818,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- cERROR(1, "no protocol version specified"
- " after vers= mount option");
- goto cifs_parse_mount_err;
- }
-
if (strnicmp(string, "cifs", 4) == 0 ||
strnicmp(string, "1", 1) == 0) {
/* This is the default */
@@ -1868,12 +1832,6 @@
if (string == NULL)
goto out_nomem;
- if (!*string) {
- printk(KERN_WARNING "CIFS: no security flavor"
- " specified\n");
- break;
- }
-
if (cifs_parse_security_flavors(string, vol) != 0)
goto cifs_parse_mount_err;
break;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index ab2594a..0e01e90 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1203,9 +1203,6 @@
unsigned long s_ext_blocks;
unsigned long s_ext_extents;
#endif
- /* ext4 extent cache stats */
- unsigned long extent_cache_hits;
- unsigned long extent_cache_misses;
/* for buddy allocator */
struct ext4_group_info ***s_group_info;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 1421938..abcdeab 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2066,10 +2066,6 @@
ret = 1;
}
errout:
- if (!ret)
- sbi->extent_cache_misses++;
- else
- sbi->extent_cache_hits++;
trace_ext4_ext_in_cache(inode, block, ret);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
return ret;
@@ -2882,7 +2878,7 @@
if (err)
goto fix_extent_len;
/* update the extent length and mark as initialized */
- ex->ee_len = cpu_to_le32(ee_len);
+ ex->ee_len = cpu_to_le16(ee_len);
ext4_ext_try_to_merge(inode, path, ex);
err = ext4_ext_dirty(handle, inode, path + depth);
goto out;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index ceebaf8..6da1935 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1305,20 +1305,20 @@
ext4_msg(sb, KERN_ERR,
"Cannot change journaled "
"quota options when quota turned on");
- return 0;
+ return -1;
}
qname = match_strdup(args);
if (!qname) {
ext4_msg(sb, KERN_ERR,
"Not enough memory for storing quotafile name");
- return 0;
+ return -1;
}
if (sbi->s_qf_names[qtype] &&
strcmp(sbi->s_qf_names[qtype], qname)) {
ext4_msg(sb, KERN_ERR,
"%s quota file already specified", QTYPE2NAME(qtype));
kfree(qname);
- return 0;
+ return -1;
}
sbi->s_qf_names[qtype] = qname;
if (strchr(sbi->s_qf_names[qtype], '/')) {
@@ -1326,7 +1326,7 @@
"quotafile must be on filesystem root");
kfree(sbi->s_qf_names[qtype]);
sbi->s_qf_names[qtype] = NULL;
- return 0;
+ return -1;
}
set_opt(sb, QUOTA);
return 1;
@@ -1341,7 +1341,7 @@
sbi->s_qf_names[qtype]) {
ext4_msg(sb, KERN_ERR, "Cannot change journaled quota options"
" when quota turned on");
- return 0;
+ return -1;
}
/*
* The space will be released later when all options are confirmed
@@ -1450,6 +1450,16 @@
const struct mount_opts *m;
int arg = 0;
+#ifdef CONFIG_QUOTA
+ if (token == Opt_usrjquota)
+ return set_qf_name(sb, USRQUOTA, &args[0]);
+ else if (token == Opt_grpjquota)
+ return set_qf_name(sb, GRPQUOTA, &args[0]);
+ else if (token == Opt_offusrjquota)
+ return clear_qf_name(sb, USRQUOTA);
+ else if (token == Opt_offgrpjquota)
+ return clear_qf_name(sb, GRPQUOTA);
+#endif
if (args->from && match_int(args, &arg))
return -1;
switch (token) {
@@ -1549,18 +1559,6 @@
sbi->s_mount_opt |= m->mount_opt;
}
#ifdef CONFIG_QUOTA
- } else if (token == Opt_usrjquota) {
- if (!set_qf_name(sb, USRQUOTA, &args[0]))
- return -1;
- } else if (token == Opt_grpjquota) {
- if (!set_qf_name(sb, GRPQUOTA, &args[0]))
- return -1;
- } else if (token == Opt_offusrjquota) {
- if (!clear_qf_name(sb, USRQUOTA))
- return -1;
- } else if (token == Opt_offgrpjquota) {
- if (!clear_qf_name(sb, GRPQUOTA))
- return -1;
} else if (m->flags & MOPT_QFMT) {
if (sb_any_quota_loaded(sb) &&
sbi->s_jquota_fmt != m->mount_opt) {
@@ -2366,18 +2364,6 @@
EXT4_SB(sb)->s_sectors_written_start) >> 1)));
}
-static ssize_t extent_cache_hits_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%lu\n", sbi->extent_cache_hits);
-}
-
-static ssize_t extent_cache_misses_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%lu\n", sbi->extent_cache_misses);
-}
-
static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
struct ext4_sb_info *sbi,
const char *buf, size_t count)
@@ -2435,8 +2421,6 @@
EXT4_RO_ATTR(delayed_allocation_blocks);
EXT4_RO_ATTR(session_write_kbytes);
EXT4_RO_ATTR(lifetime_write_kbytes);
-EXT4_RO_ATTR(extent_cache_hits);
-EXT4_RO_ATTR(extent_cache_misses);
EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, sbi_ui_show,
inode_readahead_blks_store, s_inode_readahead_blks);
EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
@@ -2452,8 +2436,6 @@
ATTR_LIST(delayed_allocation_blocks),
ATTR_LIST(session_write_kbytes),
ATTR_LIST(lifetime_write_kbytes),
- ATTR_LIST(extent_cache_hits),
- ATTR_LIST(extent_cache_misses),
ATTR_LIST(inode_readahead_blks),
ATTR_LIST(inode_goal),
ATTR_LIST(mb_stats),
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 2066328..df5ac04 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -387,9 +387,6 @@
if (fc->no_create)
return -ENOSYS;
- if (flags & O_DIRECT)
- return -EINVAL;
-
forget = fuse_alloc_forget();
if (!forget)
return -ENOMEM;
@@ -644,13 +641,12 @@
fuse_put_request(fc, req);
if (!err) {
struct inode *inode = entry->d_inode;
+ struct fuse_inode *fi = get_fuse_inode(inode);
- /*
- * Set nlink to zero so the inode can be cleared, if the inode
- * does have more links this will be discovered at the next
- * lookup/getattr.
- */
- clear_nlink(inode);
+ spin_lock(&fc->lock);
+ fi->attr_version = ++fc->attr_version;
+ drop_nlink(inode);
+ spin_unlock(&fc->lock);
fuse_invalidate_attr(inode);
fuse_invalidate_attr(dir);
fuse_invalidate_entry_cache(entry);
@@ -762,8 +758,17 @@
will reflect changes in the backing inode (link count,
etc.)
*/
- if (!err || err == -EINTR)
+ if (!err) {
+ struct fuse_inode *fi = get_fuse_inode(inode);
+
+ spin_lock(&fc->lock);
+ fi->attr_version = ++fc->attr_version;
+ inc_nlink(inode);
+ spin_unlock(&fc->lock);
fuse_invalidate_attr(inode);
+ } else if (err == -EINTR) {
+ fuse_invalidate_attr(inode);
+ }
return err;
}
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index a841868..504e61b 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -194,10 +194,6 @@
struct fuse_conn *fc = get_fuse_conn(inode);
int err;
- /* VFS checks this, but only _after_ ->open() */
- if (file->f_flags & O_DIRECT)
- return -EINVAL;
-
err = generic_file_open(inode, file);
if (err)
return err;
@@ -932,17 +928,23 @@
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
size_t count = 0;
+ size_t ocount = 0;
ssize_t written = 0;
+ ssize_t written_buffered = 0;
struct inode *inode = mapping->host;
ssize_t err;
struct iov_iter i;
+ loff_t endbyte = 0;
WARN_ON(iocb->ki_pos != pos);
- err = generic_segment_checks(iov, &nr_segs, &count, VERIFY_READ);
+ ocount = 0;
+ err = generic_segment_checks(iov, &nr_segs, &ocount, VERIFY_READ);
if (err)
return err;
+ count = ocount;
+
mutex_lock(&inode->i_mutex);
vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
@@ -962,11 +964,41 @@
file_update_time(file);
- iov_iter_init(&i, iov, nr_segs, count, 0);
- written = fuse_perform_write(file, mapping, &i, pos);
- if (written >= 0)
- iocb->ki_pos = pos + written;
+ if (file->f_flags & O_DIRECT) {
+ written = generic_file_direct_write(iocb, iov, &nr_segs,
+ pos, &iocb->ki_pos,
+ count, ocount);
+ if (written < 0 || written == count)
+ goto out;
+ pos += written;
+ count -= written;
+
+ iov_iter_init(&i, iov, nr_segs, count, written);
+ written_buffered = fuse_perform_write(file, mapping, &i, pos);
+ if (written_buffered < 0) {
+ err = written_buffered;
+ goto out;
+ }
+ endbyte = pos + written_buffered - 1;
+
+ err = filemap_write_and_wait_range(file->f_mapping, pos,
+ endbyte);
+ if (err)
+ goto out;
+
+ invalidate_mapping_pages(file->f_mapping,
+ pos >> PAGE_CACHE_SHIFT,
+ endbyte >> PAGE_CACHE_SHIFT);
+
+ written += written_buffered;
+ iocb->ki_pos = pos + written_buffered;
+ } else {
+ iov_iter_init(&i, iov, nr_segs, count, 0);
+ written = fuse_perform_write(file, mapping, &i, pos);
+ if (written >= 0)
+ iocb->ki_pos = pos + written;
+ }
out:
current->backing_dev_info = NULL;
mutex_unlock(&inode->i_mutex);
@@ -1101,6 +1133,24 @@
return res;
}
+static ssize_t __fuse_direct_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ ssize_t res;
+
+ res = generic_write_checks(file, ppos, &count, 0);
+ if (!res) {
+ res = fuse_direct_io(file, buf, count, ppos, 1);
+ if (res > 0)
+ fuse_write_update_size(inode, *ppos);
+ }
+
+ fuse_invalidate_attr(inode);
+
+ return res;
+}
+
static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -1112,16 +1162,9 @@
/* Don't allow parallel writes to the same file */
mutex_lock(&inode->i_mutex);
- res = generic_write_checks(file, ppos, &count, 0);
- if (!res) {
- res = fuse_direct_io(file, buf, count, ppos, 1);
- if (res > 0)
- fuse_write_update_size(inode, *ppos);
- }
+ res = __fuse_direct_write(file, buf, count, ppos);
mutex_unlock(&inode->i_mutex);
- fuse_invalidate_attr(inode);
-
return res;
}
@@ -2077,6 +2120,57 @@
return 0;
}
+static ssize_t fuse_loop_dio(struct file *filp, const struct iovec *iov,
+ unsigned long nr_segs, loff_t *ppos, int rw)
+{
+ const struct iovec *vector = iov;
+ ssize_t ret = 0;
+
+ while (nr_segs > 0) {
+ void __user *base;
+ size_t len;
+ ssize_t nr;
+
+ base = vector->iov_base;
+ len = vector->iov_len;
+ vector++;
+ nr_segs--;
+
+ if (rw == WRITE)
+ nr = __fuse_direct_write(filp, base, len, ppos);
+ else
+ nr = fuse_direct_read(filp, base, len, ppos);
+
+ if (nr < 0) {
+ if (!ret)
+ ret = nr;
+ break;
+ }
+ ret += nr;
+ if (nr != len)
+ break;
+ }
+
+ return ret;
+}
+
+
+static ssize_t
+fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
+ loff_t offset, unsigned long nr_segs)
+{
+ ssize_t ret = 0;
+ struct file *file = NULL;
+ loff_t pos = 0;
+
+ file = iocb->ki_filp;
+ pos = offset;
+
+ ret = fuse_loop_dio(file, iov, nr_segs, &pos, rw);
+
+ return ret;
+}
+
static const struct file_operations fuse_file_operations = {
.llseek = fuse_file_llseek,
.read = do_sync_read,
@@ -2120,6 +2214,7 @@
.readpages = fuse_readpages,
.set_page_dirty = __set_page_dirty_nobuffers,
.bmap = fuse_bmap,
+ .direct_IO = fuse_direct_IO,
};
void fuse_init_file_inode(struct inode *inode)
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 4aec599..26783eb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -947,6 +947,7 @@
sb->s_magic = FUSE_SUPER_MAGIC;
sb->s_op = &fuse_super_operations;
sb->s_maxbytes = MAX_LFS_FILESIZE;
+ sb->s_time_gran = 1;
sb->s_export_op = &fuse_export_operations;
file = fget(d.fd);
diff --git a/fs/lockd/clnt4xdr.c b/fs/lockd/clnt4xdr.c
index 3ddcbb1..13ad153 100644
--- a/fs/lockd/clnt4xdr.c
+++ b/fs/lockd/clnt4xdr.c
@@ -241,7 +241,7 @@
p = xdr_inline_decode(xdr, 4);
if (unlikely(p == NULL))
goto out_overflow;
- if (unlikely(*p > nlm4_failed))
+ if (unlikely(ntohl(*p) > ntohl(nlm4_failed)))
goto out_bad_xdr;
*stat = *p;
return 0;
diff --git a/fs/lockd/clntxdr.c b/fs/lockd/clntxdr.c
index 3d35e3e..d269ada 100644
--- a/fs/lockd/clntxdr.c
+++ b/fs/lockd/clntxdr.c
@@ -236,7 +236,7 @@
p = xdr_inline_decode(xdr, 4);
if (unlikely(p == NULL))
goto out_overflow;
- if (unlikely(*p > nlm_lck_denied_grace_period))
+ if (unlikely(ntohl(*p) > ntohl(nlm_lck_denied_grace_period)))
goto out_enum;
*stat = *p;
return 0;
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 08c6e36..43f46cd 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -803,13 +803,13 @@
return p;
}
-static int
+static __be32
compose_entry_fh(struct nfsd3_readdirres *cd, struct svc_fh *fhp,
const char *name, int namlen)
{
struct svc_export *exp;
struct dentry *dparent, *dchild;
- int rv = 0;
+ __be32 rv = nfserr_noent;
dparent = cd->fh.fh_dentry;
exp = cd->fh.fh_export;
@@ -817,26 +817,20 @@
if (isdotent(name, namlen)) {
if (namlen == 2) {
dchild = dget_parent(dparent);
- if (dchild == dparent) {
- /* filesystem root - cannot return filehandle for ".." */
- dput(dchild);
- return -ENOENT;
- }
+ /* filesystem root - cannot return filehandle for ".." */
+ if (dchild == dparent)
+ goto out;
} else
dchild = dget(dparent);
} else
dchild = lookup_one_len(name, dparent, namlen);
if (IS_ERR(dchild))
- return -ENOENT;
- rv = -ENOENT;
+ return rv;
if (d_mountpoint(dchild))
goto out;
- rv = fh_compose(fhp, exp, dchild, &cd->fh);
- if (rv)
- goto out;
if (!dchild->d_inode)
goto out;
- rv = 0;
+ rv = fh_compose(fhp, exp, dchild, &cd->fh);
out:
dput(dchild);
return rv;
@@ -845,7 +839,7 @@
static __be32 *encode_entryplus_baggage(struct nfsd3_readdirres *cd, __be32 *p, const char *name, int namlen)
{
struct svc_fh fh;
- int err;
+ __be32 err;
fh_init(&fh, NFS3_FHSIZE);
err = compose_entry_fh(cd, &fh, name, namlen);
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 2ed14df..987e719 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -235,17 +235,17 @@
*/
if (open->op_createmode == NFS4_CREATE_EXCLUSIVE && status == 0)
open->op_bmval[1] = (FATTR4_WORD1_TIME_ACCESS |
- FATTR4_WORD1_TIME_MODIFY);
+ FATTR4_WORD1_TIME_MODIFY);
} else {
status = nfsd_lookup(rqstp, current_fh,
open->op_fname.data, open->op_fname.len, resfh);
fh_unlock(current_fh);
- if (status)
- goto out;
- status = nfsd_check_obj_isreg(resfh);
}
if (status)
goto out;
+ status = nfsd_check_obj_isreg(resfh);
+ if (status)
+ goto out;
if (is_create_with_attrs(open) && open->op_acl != NULL)
do_set_nfs4_acl(rqstp, resfh, open->op_acl, open->op_bmval);
@@ -841,6 +841,7 @@
struct nfsd4_setattr *setattr)
{
__be32 status = nfs_ok;
+ int err;
if (setattr->sa_iattr.ia_valid & ATTR_SIZE) {
nfs4_lock_state();
@@ -852,9 +853,9 @@
return status;
}
}
- status = fh_want_write(&cstate->current_fh);
- if (status)
- return status;
+ err = fh_want_write(&cstate->current_fh);
+ if (err)
+ return nfserrno(err);
status = nfs_ok;
status = check_attr_support(rqstp, cstate, setattr->sa_bmval,
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 1841f8b..7f71c69 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4211,16 +4211,14 @@
* vfs_test_lock. (Arguably perhaps test_lock should be done with an
* inode operation.)
*/
-static int nfsd_test_lock(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file_lock *lock)
+static __be32 nfsd_test_lock(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file_lock *lock)
{
struct file *file;
- int err;
-
- err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
- if (err)
- return err;
- err = vfs_test_lock(file, lock);
- nfsd_close(file);
+ __be32 err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
+ if (!err) {
+ err = nfserrno(vfs_test_lock(file, lock));
+ nfsd_close(file);
+ }
return err;
}
@@ -4234,7 +4232,6 @@
struct inode *inode;
struct file_lock file_lock;
struct nfs4_lockowner *lo;
- int error;
__be32 status;
if (locks_in_grace())
@@ -4280,12 +4277,10 @@
nfs4_transform_lock_offset(&file_lock);
- status = nfs_ok;
- error = nfsd_test_lock(rqstp, &cstate->current_fh, &file_lock);
- if (error) {
- status = nfserrno(error);
+ status = nfsd_test_lock(rqstp, &cstate->current_fh, &file_lock);
+ if (status)
goto out;
- }
+
if (file_lock.fl_type != F_UNLCK) {
status = nfserr_denied;
nfs4_set_lock_denied(&file_lock, &lockt->lt_denied);
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index bcd8904..74c00bc 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1392,7 +1392,7 @@
for (i = 0; i < test_stateid->ts_num_ids; i++) {
stateid = kmalloc(sizeof(struct nfsd4_test_stateid_id), GFP_KERNEL);
if (!stateid) {
- status = PTR_ERR(stateid);
+ status = nfserrno(-ENOMEM);
goto out;
}
@@ -3410,7 +3410,7 @@
*p++ = htonl(test_stateid->ts_num_ids);
list_for_each_entry_safe(stateid, next, &test_stateid->ts_stateid_list, ts_id_list) {
- *p++ = htonl(stateid->ts_id_status);
+ *p++ = stateid->ts_id_status;
}
ADJUST_ARGS();
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 296d671..5686661 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1458,7 +1458,7 @@
switch (createmode) {
case NFS3_CREATE_UNCHECKED:
if (! S_ISREG(dchild->d_inode->i_mode))
- err = nfserr_exist;
+ goto out;
else if (truncp) {
/* in nfsv4, we need to treat this case a little
* differently. we don't want to truncate the
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 3165aeb..31b9463 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -1134,7 +1134,7 @@
}
el = path_leaf_el(path);
- rec = &el->l_recs[le32_to_cpu(el->l_next_free_rec) - 1];
+ rec = &el->l_recs[le16_to_cpu(el->l_next_free_rec) - 1];
ocfs2_adjust_rightmost_records(handle, et, path, rec);
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index cf78233..9f32d7c 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -1036,14 +1036,14 @@
tmp_el = left_path->p_node[subtree_root].el;
blkno = left_path->p_node[subtree_root+1].bh->b_blocknr;
- for (i = 0; i < le32_to_cpu(tmp_el->l_next_free_rec); i++) {
+ for (i = 0; i < le16_to_cpu(tmp_el->l_next_free_rec); i++) {
if (le64_to_cpu(tmp_el->l_recs[i].e_blkno) == blkno) {
*cpos_end = le32_to_cpu(tmp_el->l_recs[i+1].e_cpos);
break;
}
}
- BUG_ON(i == le32_to_cpu(tmp_el->l_next_free_rec));
+ BUG_ON(i == le16_to_cpu(tmp_el->l_next_free_rec));
out:
ocfs2_free_path(left_path);
@@ -1468,7 +1468,7 @@
trace_ocfs2_divide_leaf_refcount_block(
(unsigned long long)ref_leaf_bh->b_blocknr,
- le32_to_cpu(rl->rl_count), le32_to_cpu(rl->rl_used));
+ le16_to_cpu(rl->rl_count), le16_to_cpu(rl->rl_used));
/*
* XXX: Improvement later.
@@ -2411,7 +2411,7 @@
rb = (struct ocfs2_refcount_block *)
prev_bh->b_data;
- if (le64_to_cpu(rb->rf_records.rl_used) +
+ if (le16_to_cpu(rb->rf_records.rl_used) +
recs_add >
le16_to_cpu(rb->rf_records.rl_count))
ref_blocks++;
@@ -2476,7 +2476,7 @@
if (prev_bh) {
rb = (struct ocfs2_refcount_block *)prev_bh->b_data;
- if (le64_to_cpu(rb->rf_records.rl_used) + recs_add >
+ if (le16_to_cpu(rb->rf_records.rl_used) + recs_add >
le16_to_cpu(rb->rf_records.rl_count))
ref_blocks++;
@@ -3629,7 +3629,7 @@
* one will split a refcount rec, so totally we need
* clusters * 2 new refcount rec.
*/
- if (le64_to_cpu(rb->rf_records.rl_used) + clusters * 2 >
+ if (le16_to_cpu(rb->rf_records.rl_used) + clusters * 2 >
le16_to_cpu(rb->rf_records.rl_count))
ref_blocks++;
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index ba5d97e..f169da4 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -600,7 +600,7 @@
ret = ocfs2_free_clusters(handle, cluster_ac->ac_inode,
cluster_ac->ac_bh,
le64_to_cpu(rec->e_blkno),
- le32_to_cpu(rec->e_leaf_clusters));
+ le16_to_cpu(rec->e_leaf_clusters));
if (ret)
mlog_errno(ret);
/* Try all the clusters to free */
@@ -1628,7 +1628,7 @@
{
unsigned int bpc = le16_to_cpu(cl->cl_bpc);
unsigned int bitoff = le32_to_cpu(rec->e_cpos) * bpc;
- unsigned int bitcount = le32_to_cpu(rec->e_leaf_clusters) * bpc;
+ unsigned int bitcount = le16_to_cpu(rec->e_leaf_clusters) * bpc;
if (res->sr_bit_offset < bitoff)
return 0;
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index 5e4312b..eb3f84b 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -30,7 +30,7 @@
const struct clk_ops *ops;
struct clk_hw *hw;
struct clk *parent;
- char **parent_names;
+ const char **parent_names;
struct clk **parents;
u8 num_parents;
unsigned long rate;
@@ -55,12 +55,22 @@
* alternative macro for static initialization
*/
-extern struct clk_ops clk_fixed_rate_ops;
+#define DEFINE_CLK(_name, _ops, _flags, _parent_names, \
+ _parents) \
+ static struct clk _name = { \
+ .name = #_name, \
+ .ops = &_ops, \
+ .hw = &_name##_hw.hw, \
+ .parent_names = _parent_names, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .parents = _parents, \
+ .flags = _flags, \
+ }
#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \
_fixed_rate_flags) \
static struct clk _name; \
- static char *_name##_parent_names[] = {}; \
+ static const char *_name##_parent_names[] = {}; \
static struct clk_fixed_rate _name##_hw = { \
.hw = { \
.clk = &_name, \
@@ -68,23 +78,14 @@
.fixed_rate = _rate, \
.flags = _fixed_rate_flags, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_fixed_rate_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_gate_ops;
+ DEFINE_CLK(_name, clk_fixed_rate_ops, _flags, \
+ _name##_parent_names, NULL);
#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \
_flags, _reg, _bit_idx, \
_gate_flags, _lock) \
static struct clk _name; \
- static char *_name##_parent_names[] = { \
+ static const char *_name##_parent_names[] = { \
_parent_name, \
}; \
static struct clk *_name##_parents[] = { \
@@ -99,24 +100,14 @@
.flags = _gate_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_gate_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .parents = _name##_parents, \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_divider_ops;
+ DEFINE_CLK(_name, clk_gate_ops, _flags, \
+ _name##_parent_names, _name##_parents);
#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \
_flags, _reg, _shift, _width, \
_divider_flags, _lock) \
static struct clk _name; \
- static char *_name##_parent_names[] = { \
+ static const char *_name##_parent_names[] = { \
_parent_name, \
}; \
static struct clk *_name##_parents[] = { \
@@ -132,18 +123,8 @@
.flags = _divider_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_divider_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _name##_parent_names, \
- .num_parents = \
- ARRAY_SIZE(_name##_parent_names), \
- .parents = _name##_parents, \
- .flags = _flags, \
- };
-
-extern struct clk_ops clk_mux_ops;
+ DEFINE_CLK(_name, clk_divider_ops, _flags, \
+ _name##_parent_names, _name##_parents);
#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \
_reg, _shift, _width, \
@@ -159,16 +140,28 @@
.flags = _mux_flags, \
.lock = _lock, \
}; \
- static struct clk _name = { \
- .name = #_name, \
- .ops = &clk_mux_ops, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_names, \
- .num_parents = \
- ARRAY_SIZE(_parent_names), \
- .parents = _parents, \
- .flags = _flags, \
- };
+ DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names, \
+ _parents);
+
+#define DEFINE_CLK_FIXED_FACTOR(_name, _parent_name, \
+ _parent_ptr, _flags, \
+ _mult, _div) \
+ static struct clk _name; \
+ static const char *_name##_parent_names[] = { \
+ _parent_name, \
+ }; \
+ static struct clk *_name##_parents[] = { \
+ _parent_ptr, \
+ }; \
+ static struct clk_fixed_factor _name##_hw = { \
+ .hw = { \
+ .clk = &_name, \
+ }, \
+ .mult = _mult, \
+ .div = _div, \
+ }; \
+ DEFINE_CLK(_name, clk_fixed_factor_ops, _flags, \
+ _name##_parent_names, _name##_parents);
/**
* __clk_init - initialize the data structures in a struct clk
@@ -189,8 +182,12 @@
*
* It is not necessary to call clk_register if __clk_init is used directly with
* statically initialized clock data.
+ *
+ * Returns 0 on success, otherwise an error code.
*/
-void __clk_init(struct device *dev, struct clk *clk);
+int __clk_init(struct device *dev, struct clk *clk);
+
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw);
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5508897..c1c23b9 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -15,19 +15,6 @@
#ifdef CONFIG_COMMON_CLK
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure. struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
- struct clk *clk;
-};
-
/*
* flags used across common struct clk. these flags should only affect the
* top-level framework. custom flags for dealing with hardware specifics
@@ -39,6 +26,8 @@
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
+struct clk_hw;
+
/**
* struct clk_ops - Callback operations for hardware clocks; these are to
* be provided by the clock implementation, and will be called by drivers
@@ -88,19 +77,11 @@
* array index into the value programmed into the hardware.
* Returns 0 on success, -EERROR otherwise.
*
- * @set_rate: Change the rate of this clock. If this callback returns
- * CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * parent clock (which may propagate again if the parent clock
- * also sets this flag). The requested rate of the parent is
- * passed back from the callback in the second 'unsigned long *'
- * argument. Note that it is up to the hardware clock's set_rate
- * implementation to insure that clocks do not run out of spec
- * when propgating the call to set_rate up to the parent. One way
- * to do this is to gate the clock (via clk_disable and/or
- * clk_unprepare) before calling clk_set_rate, then ungating it
- * afterward. If your clock also has the CLK_GATE_SET_RATE flag
- * set then this will insure safety. Returns 0 on success,
- * -EERROR otherwise.
+ * @set_rate: Change the rate of this clock. The requested rate is specified
+ * by the second argument, which should typically be the return
+ * of .round_rate call. The third argument gives the parent rate
+ * which is likely helpful for most .set_rate implementation.
+ * Returns 0 on success, -EERROR otherwise.
*
* The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
* implementations to split any work between atomic (enable) and sleepable
@@ -125,10 +106,46 @@
unsigned long *);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
- int (*set_rate)(struct clk_hw *hw, unsigned long);
+ int (*set_rate)(struct clk_hw *hw, unsigned long,
+ unsigned long);
void (*init)(struct clk_hw *hw);
};
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+ const char *name;
+ const struct clk_ops *ops;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure. struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+ struct clk *clk;
+ struct clk_init_data *init;
+};
+
/*
* DOC: Basic clock implementations common to many platforms
*
@@ -149,6 +166,7 @@
u8 flags;
};
+extern const struct clk_ops clk_fixed_rate_ops;
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
unsigned long fixed_rate);
@@ -165,7 +183,7 @@
* Clock which can gate its output. Implements .enable & .disable
*
* Flags:
- * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
* enable the clock. Setting this flag does the opposite: setting the bit
* disable the clock and clearing it enables the clock
*/
@@ -175,11 +193,11 @@
u8 bit_idx;
u8 flags;
spinlock_t *lock;
- char *parent[1];
};
#define CLK_GATE_SET_TO_DISABLE BIT(0)
+extern const struct clk_ops clk_gate_ops;
struct clk *clk_register_gate(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
@@ -212,12 +230,12 @@
u8 width;
u8 flags;
spinlock_t *lock;
- char *parent[1];
};
#define CLK_DIVIDER_ONE_BASED BIT(0)
#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
+extern const struct clk_ops clk_divider_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
@@ -238,7 +256,7 @@
*
* Flags:
* CLK_MUX_INDEX_ONE - register index starts at 1, not 0
- * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
*/
struct clk_mux {
struct clk_hw hw;
@@ -252,29 +270,47 @@
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
+extern const struct clk_ops clk_mux_ops;
struct clk *clk_register_mux(struct device *dev, const char *name,
- char **parent_names, u8 num_parents, unsigned long flags,
+ const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
/**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mult: multiplier
+ * @div: divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+ struct clk_hw hw;
+ unsigned int mult;
+ unsigned int div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div);
+
+/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
* @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
*
* clk_register is the primary interface for populating the clock tree with new
* clock nodes. It returns a pointer to the newly allocated struct clk which
* cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API. In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
*/
-struct clk *clk_register(struct device *dev, const char *name,
- const struct clk_ops *ops, struct clk_hw *hw,
- char **parent_names, u8 num_parents, unsigned long flags);
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
/* helper functions */
const char *__clk_get_name(struct clk *clk);
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 70cf722..ad5c43e 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -81,7 +81,7 @@
int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
-#endif /* !CONFIG_COMMON_CLK */
+#endif
/**
* clk_get - lookup and obtain a reference to a clock producer.
@@ -252,7 +252,7 @@
* Returns rounded clock rate in Hz, or negative errno.
*/
long clk_round_rate(struct clk *clk, unsigned long rate);
-
+
/**
* clk_set_rate - set the clock rate for a clock source
* @clk: clock source
@@ -261,7 +261,7 @@
* Returns success (0) or negative errno.
*/
int clk_set_rate(struct clk *clk, unsigned long rate);
-
+
/**
* clk_set_parent - set the parent clock source for this clock
* @clk: clock source
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 8ba2c94..8f2ab8f 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -593,7 +593,7 @@
__u64 off;
__u32 namelen;
__u32 type;
- char name[0];
+ char name[];
};
#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 2463b61..1f90de0 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -666,23 +666,11 @@
unsigned int check_defaults:1;
unsigned int reset_registers:1;
unsigned int hs_extmute:1;
- u16 hs_left_step;
- u16 hs_right_step;
- u16 hf_left_step;
- u16 hf_right_step;
void (*set_hs_extmute)(int mute);
};
struct twl4030_vibra_data {
unsigned int coexist;
-
- /* twl6040 */
- unsigned int vibldrv_res; /* left driver resistance */
- unsigned int vibrdrv_res; /* right driver resistance */
- unsigned int viblmotor_res; /* left motor resistance */
- unsigned int vibrmotor_res; /* right motor resistance */
- int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */
- int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */
};
struct twl4030_audio_data {
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 665a260..72cbf08 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -596,6 +596,7 @@
#ifdef CONFIG_IOMMU_API
int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
+void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
int kvm_iommu_map_guest(struct kvm *kvm);
int kvm_iommu_unmap_guest(struct kvm *kvm);
int kvm_assign_device(struct kvm *kvm,
@@ -609,6 +610,11 @@
return 0;
}
+static inline void kvm_iommu_unmap_pages(struct kvm *kvm,
+ struct kvm_memory_slot *slot)
+{
+}
+
static inline int kvm_iommu_map_guest(struct kvm *kvm)
{
return -ENODEV;
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index 9890687..5a049df 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -8,70 +8,6 @@
#ifndef __MFD_DB5500_PRCMU_H
#define __MFD_DB5500_PRCMU_H
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-void db5500_prcmu_enable_wakeups(u32 wakeups);
-int db5500_prcmu_request_clock(u8 clock, bool enable);
-void db5500_prcmu_config_abb_event_readout(u32 abb_events);
-void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_resetout(u8 resoutn, u8 state);
-int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll);
-int db5500_prcmu_config_esram0_deep_sleep(u8 state);
-void db5500_prcmu_system_reset(u16 reset_code);
-u16 db5500_prcmu_get_reset_code(void);
-bool db5500_prcmu_is_ac_wake_requested(void);
-int db5500_prcmu_set_arm_opp(u8 opp);
-int db5500_prcmu_get_arm_opp(void);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_display_clocks(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_enable_dsipll(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
-{
- return 0;
-}
-
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
static inline int prcmu_resetout(u8 resoutn, u8 state)
{
return 0;
@@ -82,8 +18,10 @@
return 0;
}
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
-static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
@@ -91,7 +29,10 @@
return 0;
}
-static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
static inline u16 db5500_prcmu_get_reset_code(void)
{
@@ -113,6 +54,51 @@
return 0;
}
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+#ifdef CONFIG_MFD_DB5500_PRCMU
+
+void db5500_prcmu_early_init(void);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#else /* !CONFIG_UX500_SOC_DB5500 */
+
+static inline void db5500_prcmu_early_init(void) {}
+
+static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+ return 0;
+}
#endif /* CONFIG_MFD_DB5500_PRCMU */
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index a2c6160..0b64b19 100644
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -26,6 +26,7 @@
#include <linux/mutex.h>
#include <linux/types.h>
+#include <linux/regmap.h>
#define RC5T583_MAX_REGS 0xF8
@@ -279,14 +280,44 @@
bool enable_shutdown;
};
-int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
-int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
-int rc5t583_set_bits(struct device *dev, unsigned int reg,
- unsigned int bit_mask);
-int rc5t583_clear_bits(struct device *dev, unsigned int reg,
- unsigned int bit_mask);
-int rc5t583_update(struct device *dev, unsigned int reg,
- unsigned int val, unsigned int mask);
+static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_write(rc5t583->regmap, reg, val);
+}
+
+static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ unsigned int ival;
+ int ret;
+ ret = regmap_read(rc5t583->regmap, reg, &ival);
+ if (!ret)
+ *val = (uint8_t)ival;
+ return ret;
+}
+
+static inline int rc5t583_set_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+static inline int rc5t583_update(struct device *dev, unsigned int reg,
+ unsigned int val, unsigned int mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
int ext_pwr_req, int deepsleep_slot_nr);
int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 9bc9ac6..b15b5f0 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -174,8 +174,35 @@
#define TWL6040_SYSCLK_SEL_LPPLL 0
#define TWL6040_SYSCLK_SEL_HPPLL 1
+struct twl6040_codec_data {
+ u16 hs_left_step;
+ u16 hs_right_step;
+ u16 hf_left_step;
+ u16 hf_right_step;
+};
+
+struct twl6040_vibra_data {
+ unsigned int vibldrv_res; /* left driver resistance */
+ unsigned int vibrdrv_res; /* right driver resistance */
+ unsigned int viblmotor_res; /* left motor resistance */
+ unsigned int vibrmotor_res; /* right motor resistance */
+ int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */
+ int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */
+};
+
+struct twl6040_platform_data {
+ int audpwron_gpio; /* audio power-on gpio */
+ unsigned int irq_base;
+
+ struct twl6040_codec_data *codec;
+ struct twl6040_vibra_data *vibra;
+};
+
+struct regmap;
+
struct twl6040 {
struct device *dev;
+ struct regmap *regmap;
struct mutex mutex;
struct mutex io_mutex;
struct mutex irq_mutex;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d8738a4..74aa71b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1393,29 +1393,20 @@
extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
-extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
- unsigned long len, unsigned long prot,
- unsigned long flag, unsigned long pgoff);
extern unsigned long mmap_region(struct file *file, unsigned long addr,
unsigned long len, unsigned long flags,
vm_flags_t vm_flags, unsigned long pgoff);
-
-static inline unsigned long do_mmap(struct file *file, unsigned long addr,
- unsigned long len, unsigned long prot,
- unsigned long flag, unsigned long offset)
-{
- unsigned long ret = -EINVAL;
- if ((offset + PAGE_ALIGN(len)) < offset)
- goto out;
- if (!(offset & ~PAGE_MASK))
- ret = do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT);
-out:
- return ret;
-}
-
+extern unsigned long do_mmap(struct file *, unsigned long,
+ unsigned long, unsigned long,
+ unsigned long, unsigned long);
extern int do_munmap(struct mm_struct *, unsigned long, size_t);
-extern unsigned long do_brk(unsigned long, unsigned long);
+/* These take the mm semaphore themselves */
+extern unsigned long vm_brk(unsigned long, unsigned long);
+extern int vm_munmap(unsigned long, size_t);
+extern unsigned long vm_mmap(struct file *, unsigned long,
+ unsigned long, unsigned long,
+ unsigned long, unsigned long);
/* truncate.c */
extern void truncate_inode_pages(struct address_space *, loff_t);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 01beae7..629b823 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -481,7 +481,7 @@
struct device_driver drv;
int (*probe)(struct mmc_card *);
void (*remove)(struct mmc_card *);
- int (*suspend)(struct mmc_card *, pm_message_t);
+ int (*suspend)(struct mmc_card *);
int (*resume)(struct mmc_card *);
};
diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild
index b8d4001..5b7d84a 100644
--- a/include/linux/nfsd/Kbuild
+++ b/include/linux/nfsd/Kbuild
@@ -1,3 +1,4 @@
+header-y += cld.h
header-y += debug.h
header-y += export.h
header-y += nfsfh.h
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index f67810f..38ab3f4 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -94,6 +94,7 @@
struct usb_otg *otg;
+ struct device *io_dev;
struct usb_phy_io_ops *io_ops;
void __iomem *io_priv;
diff --git a/lib/mpi/mpi-bit.c b/lib/mpi/mpi-bit.c
index 2f52662..0c50536 100644
--- a/lib/mpi/mpi-bit.c
+++ b/lib/mpi/mpi-bit.c
@@ -177,8 +177,8 @@
*/
int mpi_lshift_limbs(MPI a, unsigned int count)
{
- mpi_ptr_t ap = a->d;
- int n = a->nlimbs;
+ const int n = a->nlimbs;
+ mpi_ptr_t ap;
int i;
if (!count || !n)
@@ -187,6 +187,7 @@
if (RESIZE_IF_NEEDED(a, n + count) < 0)
return -ENOMEM;
+ ap = a->d;
for (i = n - 1; i >= 0; i--)
ap[i + count] = ap[i];
for (i = 0; i < count; i++)
diff --git a/mm/memblock.c b/mm/memblock.c
index 99f2855..a44eab3 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -330,6 +330,9 @@
phys_addr_t end = base + memblock_cap_size(base, &size);
int i, nr_new;
+ if (!size)
+ return 0;
+
/* special case for empty array */
if (type->regions[0].size == 0) {
WARN_ON(type->cnt != 1 || type->total_size);
@@ -430,6 +433,9 @@
*start_rgn = *end_rgn = 0;
+ if (!size)
+ return 0;
+
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
if (memblock_double_array(type) < 0)
@@ -514,7 +520,6 @@
(unsigned long long)base,
(unsigned long long)base + size,
(void *)_RET_IP_);
- BUG_ON(0 == size);
return memblock_add_region(_rgn, base, size, MAX_NUMNODES);
}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index a7165a6..b868def 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3392,6 +3392,7 @@
* the newpage may be on LRU(or pagevec for LRU) already. We lock
* LRU while we overwrite pc->mem_cgroup.
*/
+ pc = lookup_page_cgroup(newpage);
__mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true);
}
diff --git a/mm/mmap.c b/mm/mmap.c
index a7bf6a3..848ef52 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -240,6 +240,8 @@
return next;
}
+static unsigned long do_brk(unsigned long addr, unsigned long len);
+
SYSCALL_DEFINE1(brk, unsigned long, brk)
{
unsigned long rlim, retval;
@@ -951,7 +953,7 @@
* The caller must hold down_write(¤t->mm->mmap_sem).
*/
-unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
+static unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
unsigned long len, unsigned long prot,
unsigned long flags, unsigned long pgoff)
{
@@ -1087,7 +1089,32 @@
return mmap_region(file, addr, len, flags, vm_flags, pgoff);
}
-EXPORT_SYMBOL(do_mmap_pgoff);
+
+unsigned long do_mmap(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long prot,
+ unsigned long flag, unsigned long offset)
+{
+ if (unlikely(offset + PAGE_ALIGN(len) < offset))
+ return -EINVAL;
+ if (unlikely(offset & ~PAGE_MASK))
+ return -EINVAL;
+ return do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(do_mmap);
+
+unsigned long vm_mmap(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long prot,
+ unsigned long flag, unsigned long offset)
+{
+ unsigned long ret;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+ ret = do_mmap(file, addr, len, prot, flag, offset);
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+EXPORT_SYMBOL(vm_mmap);
SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
@@ -2105,21 +2132,25 @@
return 0;
}
-
EXPORT_SYMBOL(do_munmap);
-SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
+int vm_munmap(unsigned long start, size_t len)
{
int ret;
struct mm_struct *mm = current->mm;
- profile_munmap(addr);
-
down_write(&mm->mmap_sem);
- ret = do_munmap(mm, addr, len);
+ ret = do_munmap(mm, start, len);
up_write(&mm->mmap_sem);
return ret;
}
+EXPORT_SYMBOL(vm_munmap);
+
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
+{
+ profile_munmap(addr);
+ return vm_munmap(addr, len);
+}
static inline void verify_mm_writelocked(struct mm_struct *mm)
{
@@ -2136,7 +2167,7 @@
* anonymous maps. eventually we may be able to do some
* brk-specific accounting here.
*/
-unsigned long do_brk(unsigned long addr, unsigned long len)
+static unsigned long do_brk(unsigned long addr, unsigned long len)
{
struct mm_struct * mm = current->mm;
struct vm_area_struct * vma, * prev;
@@ -2232,7 +2263,17 @@
return addr;
}
-EXPORT_SYMBOL(do_brk);
+unsigned long vm_brk(unsigned long addr, unsigned long len)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long ret;
+
+ down_write(&mm->mmap_sem);
+ ret = do_brk(addr, len);
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+EXPORT_SYMBOL(vm_brk);
/* Release all mmaps. */
void exit_mmap(struct mm_struct *mm)
diff --git a/mm/nommu.c b/mm/nommu.c
index f59e170..bb8f4f0 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1233,7 +1233,7 @@
/*
* handle mapping creation for uClinux
*/
-unsigned long do_mmap_pgoff(struct file *file,
+static unsigned long do_mmap_pgoff(struct file *file,
unsigned long addr,
unsigned long len,
unsigned long prot,
@@ -1470,7 +1470,32 @@
show_free_areas(0);
return -ENOMEM;
}
-EXPORT_SYMBOL(do_mmap_pgoff);
+
+unsigned long do_mmap(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long prot,
+ unsigned long flag, unsigned long offset)
+{
+ if (unlikely(offset + PAGE_ALIGN(len) < offset))
+ return -EINVAL;
+ if (unlikely(offset & ~PAGE_MASK))
+ return -EINVAL;
+ return do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(do_mmap);
+
+unsigned long vm_mmap(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long prot,
+ unsigned long flag, unsigned long offset)
+{
+ unsigned long ret;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+ ret = do_mmap(file, addr, len, prot, flag, offset);
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+EXPORT_SYMBOL(vm_mmap);
SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
@@ -1709,16 +1734,22 @@
}
EXPORT_SYMBOL(do_munmap);
-SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
+int vm_munmap(unsigned long addr, size_t len)
{
- int ret;
struct mm_struct *mm = current->mm;
+ int ret;
down_write(&mm->mmap_sem);
ret = do_munmap(mm, addr, len);
up_write(&mm->mmap_sem);
return ret;
}
+EXPORT_SYMBOL(vm_munmap);
+
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
+{
+ return vm_munmap(addr, len);
+}
/*
* release all the mappings made in a process's VM space
@@ -1744,7 +1775,7 @@
kleave("");
}
-unsigned long do_brk(unsigned long addr, unsigned long len)
+unsigned long vm_brk(unsigned long addr, unsigned long len)
{
return -ENOMEM;
}
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index de639ee..faea0ec 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1869,12 +1869,6 @@
"No space is necessary after a cast\n" . $hereprev);
}
- if ($rawline =~ /^\+[ \t]*\/\*[ \t]*$/ &&
- $prevrawline =~ /^\+[ \t]*$/) {
- CHK("BLOCK_COMMENT_STYLE",
- "Don't begin block comments with only a /* line, use /* comment...\n" . $hereprev);
- }
-
# check for spaces at the beginning of a line.
# Exceptions:
# 1) within comments
diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh
index 17a5798..7a2d372 100644
--- a/scripts/xz_wrap.sh
+++ b/scripts/xz_wrap.sh
@@ -12,8 +12,8 @@
BCJ=
LZMA2OPTS=
-case $ARCH in
- x86|x86_64) BCJ=--x86 ;;
+case $SRCARCH in
+ x86) BCJ=--x86 ;;
powerpc) BCJ=--powerpc ;;
ia64) BCJ=--ia64; LZMA2OPTS=pb=4 ;;
arm) BCJ=--arm ;;
diff --git a/security/commoncap.c b/security/commoncap.c
index 0cf4b53..71a166a 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -29,6 +29,7 @@
#include <linux/securebits.h>
#include <linux/user_namespace.h>
#include <linux/binfmts.h>
+#include <linux/personality.h>
/*
* If a non-root user executes a setuid-root binary in
@@ -505,6 +506,11 @@
}
skip:
+ /* if we have fs caps, clear dangerous personality flags */
+ if (!cap_issubset(new->cap_permitted, old->cap_permitted))
+ bprm->per_clear |= PER_CLEAR_ON_SETID;
+
+
/* Don't let someone trace a set[ug]id/setpcap binary with the revised
* credentials unless they have the appropriate permit
*/
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 10056f2..45c32f0 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3640,8 +3640,38 @@
};
-static __init void init_smack_know_list(void)
+static __init void init_smack_known_list(void)
{
+ /*
+ * Initialize CIPSO locks
+ */
+ spin_lock_init(&smack_known_huh.smk_cipsolock);
+ spin_lock_init(&smack_known_hat.smk_cipsolock);
+ spin_lock_init(&smack_known_star.smk_cipsolock);
+ spin_lock_init(&smack_known_floor.smk_cipsolock);
+ spin_lock_init(&smack_known_invalid.smk_cipsolock);
+ spin_lock_init(&smack_known_web.smk_cipsolock);
+ /*
+ * Initialize rule list locks
+ */
+ mutex_init(&smack_known_huh.smk_rules_lock);
+ mutex_init(&smack_known_hat.smk_rules_lock);
+ mutex_init(&smack_known_floor.smk_rules_lock);
+ mutex_init(&smack_known_star.smk_rules_lock);
+ mutex_init(&smack_known_invalid.smk_rules_lock);
+ mutex_init(&smack_known_web.smk_rules_lock);
+ /*
+ * Initialize rule lists
+ */
+ INIT_LIST_HEAD(&smack_known_huh.smk_rules);
+ INIT_LIST_HEAD(&smack_known_hat.smk_rules);
+ INIT_LIST_HEAD(&smack_known_star.smk_rules);
+ INIT_LIST_HEAD(&smack_known_floor.smk_rules);
+ INIT_LIST_HEAD(&smack_known_invalid.smk_rules);
+ INIT_LIST_HEAD(&smack_known_web.smk_rules);
+ /*
+ * Create the known labels list
+ */
list_add(&smack_known_huh.list, &smack_known_list);
list_add(&smack_known_hat.list, &smack_known_list);
list_add(&smack_known_star.list, &smack_known_list);
@@ -3676,16 +3706,8 @@
cred = (struct cred *) current->cred;
cred->security = tsp;
- /* initialize the smack_know_list */
- init_smack_know_list();
- /*
- * Initialize locks
- */
- spin_lock_init(&smack_known_huh.smk_cipsolock);
- spin_lock_init(&smack_known_hat.smk_cipsolock);
- spin_lock_init(&smack_known_star.smk_cipsolock);
- spin_lock_init(&smack_known_floor.smk_cipsolock);
- spin_lock_init(&smack_known_invalid.smk_cipsolock);
+ /* initialize the smack_known_list */
+ init_smack_known_list();
/*
* Register with LSM
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 5c32f36..038811c 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -1614,20 +1614,6 @@
smk_cipso_doi();
smk_unlbl_ambient(NULL);
- mutex_init(&smack_known_floor.smk_rules_lock);
- mutex_init(&smack_known_hat.smk_rules_lock);
- mutex_init(&smack_known_huh.smk_rules_lock);
- mutex_init(&smack_known_invalid.smk_rules_lock);
- mutex_init(&smack_known_star.smk_rules_lock);
- mutex_init(&smack_known_web.smk_rules_lock);
-
- INIT_LIST_HEAD(&smack_known_floor.smk_rules);
- INIT_LIST_HEAD(&smack_known_hat.smk_rules);
- INIT_LIST_HEAD(&smack_known_huh.smk_rules);
- INIT_LIST_HEAD(&smack_known_invalid.smk_rules);
- INIT_LIST_HEAD(&smack_known_star.smk_rules);
- INIT_LIST_HEAD(&smack_known_web.smk_rules);
-
return err;
}
diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c
index 14a286a..8575861 100644
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -419,6 +419,7 @@
* snd_ctl_add_vmaster_hook - Add a hook to a vmaster control
* @kcontrol: vmaster kctl element
* @hook: the hook function
+ * @private_data: the private_data pointer to be saved
*
* Adds the given hook to the vmaster control element so that it's called
* at each time when the value is changed.
diff --git a/sound/last.c b/sound/last.c
index bdd0857..7ffc182 100644
--- a/sound/last.c
+++ b/sound/last.c
@@ -38,4 +38,4 @@
return 0;
}
-__initcall(alsa_sound_last_init);
+late_initcall_sync(alsa_sound_last_init);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index a36488d..d906c5b 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3971,9 +3971,14 @@
int i;
mute_outputs(codec, spec->multiout.num_dacs, spec->multiout.dac_nids);
- for (i = 0; i < cfg->hp_outs; i++)
+ for (i = 0; i < cfg->hp_outs; i++) {
+ unsigned int val = PIN_OUT;
+ if (snd_hda_query_pin_caps(codec, cfg->hp_pins[i]) &
+ AC_PINCAP_HP_DRV)
+ val |= AC_PINCTL_HP_EN;
snd_hda_codec_write(codec, cfg->hp_pins[i], 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+ AC_VERB_SET_PIN_WIDGET_CONTROL, val);
+ }
mute_outputs(codec, cfg->hp_outs, cfg->hp_pins);
mute_outputs(codec, cfg->line_outs, cfg->line_out_pins);
mute_outputs(codec, cfg->speaker_outs, cfg->speaker_pins);
@@ -4391,8 +4396,10 @@
enum {
CXT_PINCFG_LENOVO_X200,
+ CXT_PINCFG_LENOVO_TP410,
};
+/* ThinkPad X200 & co with cxt5051 */
static const struct cxt_pincfg cxt_pincfg_lenovo_x200[] = {
{ 0x16, 0x042140ff }, /* HP (seq# overridden) */
{ 0x17, 0x21a11000 }, /* dock-mic */
@@ -4401,15 +4408,33 @@
{}
};
-static const struct cxt_pincfg *cxt_pincfg_tbl[] = {
- [CXT_PINCFG_LENOVO_X200] = cxt_pincfg_lenovo_x200,
+/* ThinkPad 410/420/510/520, X201 & co with cxt5066 */
+static const struct cxt_pincfg cxt_pincfg_lenovo_tp410[] = {
+ { 0x19, 0x042110ff }, /* HP (seq# overridden) */
+ { 0x1a, 0x21a190f0 }, /* dock-mic */
+ { 0x1c, 0x212140ff }, /* dock-HP */
+ {}
};
-static const struct snd_pci_quirk cxt_fixups[] = {
+static const struct cxt_pincfg *cxt_pincfg_tbl[] = {
+ [CXT_PINCFG_LENOVO_X200] = cxt_pincfg_lenovo_x200,
+ [CXT_PINCFG_LENOVO_TP410] = cxt_pincfg_lenovo_tp410,
+};
+
+static const struct snd_pci_quirk cxt5051_fixups[] = {
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200),
{}
};
+static const struct snd_pci_quirk cxt5066_fixups[] = {
+ SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T410", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
+ {}
+};
+
/* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches
* can be created (bko#42825)
*/
@@ -4446,13 +4471,13 @@
case 0x14f15051:
add_cx5051_fake_mutes(codec);
codec->pin_amp_workaround = 1;
+ apply_pin_fixup(codec, cxt5051_fixups, cxt_pincfg_tbl);
break;
default:
codec->pin_amp_workaround = 1;
+ apply_pin_fixup(codec, cxt5066_fixups, cxt_pincfg_tbl);
}
- apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
-
/* Show mute-led control only on HP laptops
* This is a sort of white-list: on HP laptops, EAPD corresponds
* only to the mute-LED without actualy amp function. Meanwhile,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2508f81..e65e354 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1445,6 +1445,13 @@
ALC_FIXUP_ACT_BUILD,
};
+static void alc_apply_pincfgs(struct hda_codec *codec,
+ const struct alc_pincfg *cfg)
+{
+ for (; cfg->nid; cfg++)
+ snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+}
+
static void alc_apply_fixup(struct hda_codec *codec, int action)
{
struct alc_spec *spec = codec->spec;
@@ -1478,9 +1485,7 @@
snd_printdd(KERN_INFO "hda_codec: %s: "
"Apply pincfg for %s\n",
codec->chip_name, modelname);
- for (; cfg->nid; cfg++)
- snd_hda_codec_set_pincfg(codec, cfg->nid,
- cfg->val);
+ alc_apply_pincfgs(codec, cfg);
break;
case ALC_FIXUP_VERBS:
if (action != ALC_FIXUP_ACT_PROBE || !fix->v.verbs)
@@ -4861,6 +4866,7 @@
ALC260_FIXUP_GPIO1_TOGGLE,
ALC260_FIXUP_REPLACER,
ALC260_FIXUP_HP_B1900,
+ ALC260_FIXUP_KN1,
};
static void alc260_gpio1_automute(struct hda_codec *codec)
@@ -4888,6 +4894,36 @@
}
}
+static void alc260_fixup_kn1(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+ static const struct alc_pincfg pincfgs[] = {
+ { 0x0f, 0x02214000 }, /* HP/speaker */
+ { 0x12, 0x90a60160 }, /* int mic */
+ { 0x13, 0x02a19000 }, /* ext mic */
+ { 0x18, 0x01446000 }, /* SPDIF out */
+ /* disable bogus I/O pins */
+ { 0x10, 0x411111f0 },
+ { 0x11, 0x411111f0 },
+ { 0x14, 0x411111f0 },
+ { 0x15, 0x411111f0 },
+ { 0x16, 0x411111f0 },
+ { 0x17, 0x411111f0 },
+ { 0x19, 0x411111f0 },
+ { }
+ };
+
+ switch (action) {
+ case ALC_FIXUP_ACT_PRE_PROBE:
+ alc_apply_pincfgs(codec, pincfgs);
+ break;
+ case ALC_FIXUP_ACT_PROBE:
+ spec->init_amp = ALC_INIT_NONE;
+ break;
+ }
+}
+
static const struct alc_fixup alc260_fixups[] = {
[ALC260_FIXUP_HP_DC5750] = {
.type = ALC_FIXUP_PINS,
@@ -4938,7 +4974,11 @@
.v.func = alc260_fixup_gpio1_toggle,
.chained = true,
.chain_id = ALC260_FIXUP_COEF,
- }
+ },
+ [ALC260_FIXUP_KN1] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc260_fixup_kn1,
+ },
};
static const struct snd_pci_quirk alc260_fixup_tbl[] = {
@@ -4948,6 +4988,7 @@
SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", ALC260_FIXUP_HP_DC5750),
SND_PCI_QUIRK(0x103c, 0x30ba, "HP Presario B1900", ALC260_FIXUP_HP_B1900),
SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FIXUP_GPIO1),
+ SND_PCI_QUIRK(0x152d, 0x0729, "Quanta KN1", ALC260_FIXUP_KN1),
SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_FIXUP_REPLACER),
SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_FIXUP_COEF),
{}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 33a9946..4742cac 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -5063,12 +5063,11 @@
if (spec->gpio_led_polarity)
muted = !muted;
- /*polarity defines *not* muted state level*/
if (!spec->vref_mute_led_nid) {
if (muted)
- spec->gpio_data &= ~spec->gpio_led; /* orange */
+ spec->gpio_data |= spec->gpio_led;
else
- spec->gpio_data |= spec->gpio_led; /* white */
+ spec->gpio_data &= ~spec->gpio_led;
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data);
} else {
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 6508e8b..59d8efa 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -57,7 +57,7 @@
select SND_SOC_TPA6130A2 if I2C
select SND_SOC_TLV320DAC33 if I2C
select SND_SOC_TWL4030 if TWL4030_CORE
- select SND_SOC_TWL6040 if TWL4030_CORE
+ select SND_SOC_TWL6040 if TWL6040_CORE
select SND_SOC_UDA134X
select SND_SOC_UDA1380 if I2C
select SND_SOC_WL1273 if MFD_WL1273_CORE
@@ -276,7 +276,6 @@
tristate
config SND_SOC_TWL6040
- select TWL6040_CORE
tristate
config SND_SOC_UDA134X
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 2d8c6b8..dc7509b 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -26,7 +26,6 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <sound/core.h>
@@ -1528,7 +1527,7 @@
static int twl6040_probe(struct snd_soc_codec *codec)
{
struct twl6040_data *priv;
- struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev);
+ struct twl6040_codec_data *pdata = dev_get_platdata(codec->dev);
struct platform_device *pdev = container_of(codec->dev,
struct platform_device, dev);
int ret = 0;
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index e00dd0b..deafbfa 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -97,7 +97,7 @@
config SND_OMAP_SOC_OMAP_ABE_TWL6040
tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
- depends on TWL4030_CORE && SND_OMAP_SOC && ARCH_OMAP4
+ depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4
select SND_OMAP_SOC_DMIC
select SND_OMAP_SOC_MCPDM
select SND_SOC_TWL6040
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index 416684b..26b823b 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -19,3 +19,5 @@
cscope*
config.mak
config.mak.autogen
+*-bison.*
+*-flex.*
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 820371f..03059e7 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -237,21 +237,20 @@
FLEX = $(CROSS_COMPILE)flex
BISON= $(CROSS_COMPILE)bison
-event-parser:
- $(QUIET_BISON)$(BISON) -v util/parse-events.y -d -o $(OUTPUT)util/parse-events-bison.c
+$(OUTPUT)util/parse-events-flex.c: util/parse-events.l
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
-$(OUTPUT)util/parse-events-flex.c: event-parser
-$(OUTPUT)util/parse-events-bison.c: event-parser
+$(OUTPUT)util/parse-events-bison.c: util/parse-events.y
+ $(QUIET_BISON)$(BISON) -v util/parse-events.y -d -o $(OUTPUT)util/parse-events-bison.c
-pmu-parser:
- $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c
+$(OUTPUT)util/pmu-flex.c: util/pmu.l
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
-$(OUTPUT)util/pmu-flex.c: pmu-parser
-$(OUTPUT)util/pmu-bison.c: pmu-parser
+$(OUTPUT)util/pmu-bison.c: util/pmu.y
+ $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c
-$(OUTPUT)util/parse-events.o: event-parser pmu-parser
+$(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
+$(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
LIB_FILE=$(OUTPUT)libperf.a
@@ -527,7 +526,7 @@
endif
ifdef NO_GTK2
- BASIC_CFLAGS += -DNO_GTK2
+ BASIC_CFLAGS += -DNO_GTK2_SUPPORT
else
FLAGS_GTK2=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0)
ifneq ($(call try-cc,$(SOURCE_GTK2),$(FLAGS_GTK2)),y)
@@ -852,8 +851,6 @@
@echo ' html - make html documentation'
@echo ' info - make GNU info documentation (access with info <foo>)'
@echo ' pdf - make pdf documentation'
- @echo ' event-parser - make event parser code'
- @echo ' pmu-parser - make pmu format parser code'
@echo ' TAGS - use etags to make tag information for source browsing'
@echo ' tags - use ctags to make tag information for source browsing'
@echo ' cscope - use cscope to make interactive browsing database'
diff --git a/tools/perf/perf-archive.sh b/tools/perf/perf-archive.sh
index 677e59d..95b6f8b 100644
--- a/tools/perf/perf-archive.sh
+++ b/tools/perf/perf-archive.sh
@@ -29,13 +29,14 @@
fi
MANIFEST=$(mktemp /tmp/perf-archive-manifest.XXXXXX)
+PERF_BUILDID_LINKDIR=$(readlink -f $PERF_BUILDID_DIR)/
cut -d ' ' -f 1 $BUILDIDS | \
while read build_id ; do
linkname=$PERF_BUILDID_DIR.build-id/${build_id:0:2}/${build_id:2}
filename=$(readlink -f $linkname)
echo ${linkname#$PERF_BUILDID_DIR} >> $MANIFEST
- echo ${filename#$PERF_BUILDID_DIR} >> $MANIFEST
+ echo ${filename#$PERF_BUILDID_LINKDIR} >> $MANIFEST
done
tar cfj $PERF_DATA.tar.bz2 -C $PERF_BUILDID_DIR -T $MANIFEST
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 00923cd..1efd3be 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -876,11 +876,11 @@
dump_sample(session, event, sample);
if (evsel == NULL) {
++session->hists.stats.nr_unknown_id;
- return -1;
+ return 0;
}
if (machine == NULL) {
++session->hists.stats.nr_unprocessable_samples;
- return -1;
+ return 0;
}
return tool->sample(tool, event, sample, evsel, machine);
case PERF_RECORD_MMAP:
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index a457d21..e9fff98 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -240,9 +240,13 @@
return -ENODEV;
}
+ mutex_lock(&kvm->slots_lock);
+
kvm->arch.iommu_domain = iommu_domain_alloc(&pci_bus_type);
- if (!kvm->arch.iommu_domain)
- return -ENOMEM;
+ if (!kvm->arch.iommu_domain) {
+ r = -ENOMEM;
+ goto out_unlock;
+ }
if (!allow_unsafe_assigned_interrupts &&
!iommu_domain_has_cap(kvm->arch.iommu_domain,
@@ -253,17 +257,16 @@
" module option.\n", __func__);
iommu_domain_free(kvm->arch.iommu_domain);
kvm->arch.iommu_domain = NULL;
- return -EPERM;
+ r = -EPERM;
+ goto out_unlock;
}
r = kvm_iommu_map_memslots(kvm);
if (r)
- goto out_unmap;
+ kvm_iommu_unmap_memslots(kvm);
- return 0;
-
-out_unmap:
- kvm_iommu_unmap_memslots(kvm);
+out_unlock:
+ mutex_unlock(&kvm->slots_lock);
return r;
}
@@ -310,6 +313,11 @@
}
}
+void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
+{
+ kvm_iommu_put_pages(kvm, slot->base_gfn, slot->npages);
+}
+
static int kvm_iommu_unmap_memslots(struct kvm *kvm)
{
int idx;
@@ -320,7 +328,7 @@
slots = kvm_memslots(kvm);
kvm_for_each_memslot(memslot, slots)
- kvm_iommu_put_pages(kvm, memslot->base_gfn, memslot->npages);
+ kvm_iommu_unmap_pages(kvm, memslot);
srcu_read_unlock(&kvm->srcu, idx);
@@ -335,7 +343,11 @@
if (!domain)
return 0;
+ mutex_lock(&kvm->slots_lock);
kvm_iommu_unmap_memslots(kvm);
+ kvm->arch.iommu_domain = NULL;
+ mutex_unlock(&kvm->slots_lock);
+
iommu_domain_free(domain);
return 0;
}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 42b7393..9739b53 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -808,12 +808,13 @@
if (r)
goto out_free;
- /* map the pages in iommu page table */
+ /* map/unmap the pages in iommu page table */
if (npages) {
r = kvm_iommu_map_pages(kvm, &new);
if (r)
goto out_free;
- }
+ } else
+ kvm_iommu_unmap_pages(kvm, &old);
r = -ENOMEM;
slots = kmemdup(kvm->memslots, sizeof(struct kvm_memslots),