Merge branch 'misc' into devel
Conflicts:
arch/arm/mm/init.c
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index dd10b51..5405f7a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
- - how to access I/O mapped memory from within device drivers.
IPMI.txt
- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
IRQ-affinity.txt
@@ -84,6 +82,8 @@
- info on block devices & drivers
btmrvl.txt
- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+ - how to access I/O mapped memory from within device drivers.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
@@ -168,6 +168,8 @@
- how to use the RAM disk as an initial/temporary root filesystem.
input/
- info on Linux input device support.
+io-mapping.txt
+ - description of io_mapping functions in linux/io-mapping.h
io_ordering.txt
- info on ordering I/O writes to memory-mapped addresses.
ioctl/
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
similarity index 100%
rename from Documentation/IO-mapping.txt
rename to Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c268783..1571c0c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -647,3 +647,10 @@
----------------------------
+What: The acpi_sleep=s4_nonvs command line option
+When: 2.6.37
+Files: arch/x86/kernel/acpi/sleep.c
+Why: superseded by acpi_sleep=nonvs
+Who: Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4ddb58d..2b2407d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -254,8 +254,8 @@
control method, with respect to putting devices into
low power states, to be enforced (the ACPI 2.0 ordering
of _PTS is used by default).
- s4_nonvs prevents the kernel from saving/restoring the
- ACPI NVS memory during hibernation.
+ nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during suspend/hibernation and resume.
sci_force_enable causes the kernel to set SCI_EN directly
on resume from S1/S3 (which is against the ACPI spec,
but some broken systems don't work without it).
diff --git a/MAINTAINERS b/MAINTAINERS
index 5884812..db3d0f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5336,6 +5336,7 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
S: Maintained
F: arch/sparc/
+F: drivers/sbus
SPARC SERIAL DRIVERS
M: "David S. Miller" <davem@davemloft.net>
diff --git a/Makefile b/Makefile
index 037ff4e..886bf04 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 35
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Sheep on Meth
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 157b08a..ba1ac08 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,6 +10,7 @@
default y
select HAVE_AOUT
select HAVE_IDE
+ select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -440,21 +441,6 @@
help
Support for Intel's IXP4XX (XScale) family of processors.
-config ARCH_L7200
- bool "LinkUp-L7200"
- select CPU_ARM720T
- select FIQ
- select ARCH_USES_GETTIMEOFFSET
- help
- Say Y here if you intend to run this kernel on a LinkUp Systems
- L7200 Software Development Board which uses an ARM720T processor.
- Information on this board can be obtained at:
-
- <http://www.linkupsys.com/>
-
- If you have any questions or comments about the Linux kernel port
- to this board, send e-mail to <sjhill@cotw.com>.
-
config ARCH_DOVE
bool "Marvell Dove"
select PCI
@@ -720,7 +706,6 @@
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select CPU_ARM922T
- select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_USES_GETTIMEOFFSET
help
@@ -1168,9 +1153,10 @@
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
default y
- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
@@ -1181,10 +1167,10 @@
config HZ
int
- default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
+ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
default 100
config THUMB2_KERNEL
@@ -1237,10 +1223,6 @@
config ARCH_HAS_HOLES_MEMORYMODEL
bool
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
- bool
-
config ARCH_SPARSEMEM_ENABLE
bool
@@ -1248,13 +1230,7 @@
def_bool ARCH_SPARSEMEM_ENABLE
config ARCH_SELECT_MEMORY_MODEL
- def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
- int
- default "4" if ARCH_LH7A40X
- default "2"
- depends on NEED_MULTIPLE_NODES
+ def_bool ARCH_SPARSEMEM_ENABLE
config HIGHMEM
bool "High Memory Support (EXPERIMENTAL)"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313..bea37a2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -139,7 +139,6 @@
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MMP) := mmp
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 53faa90..7a29301 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -19,10 +19,6 @@
OBJS += head-shark.o ofw-shark.o
endif
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS += head-l7200.o
-endif
-
ifeq ($(CONFIG_ARCH_P720T),y)
# Borrow this code from SA1100
OBJS += head-sa1100.o
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
deleted file mode 100644
index d0e3b20..0000000
--- a/arch/arm/boot/compressed/head-l7200.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-l7200.S
- *
- * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
- *
- * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
- * is merged with head.S by the linker.
- */
-
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_ARCH_L7200
-#error What am I doing here...
-#endif
-
- .section ".start", "ax"
-
-__L7200_start:
- mov r0, #0x00100000 @ FLASH address of initrd
- mov r2, #0xf1000000 @ RAM address of initrd
- add r3, r2, #0x00700000 @ Size of initrd
-1:
- ldmia r0!, {r4, r5, r6, r7}
- stmia r2!, {r4, r5, r6, r7}
- cmp r2, r3
- ble 1b
-
- mov r8, #0 @ Zero it out
- mov r7, #MACH_TYPE_L7200 @ Set architecture ID
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 337741f..7dfa9a8 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -108,6 +108,51 @@
spin_unlock(&irq_controller_lock);
}
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+ void __iomem *base = gic_dist_base(irq);
+ unsigned int gicirq = gic_irq(irq);
+ u32 enablemask = 1 << (gicirq % 32);
+ u32 enableoff = (gicirq / 32) * 4;
+ u32 confmask = 0x2 << ((gicirq % 16) * 2);
+ u32 confoff = (gicirq / 16) * 4;
+ bool enabled = false;
+ u32 val;
+
+ /* Interrupt configuration for SGIs can't be changed */
+ if (gicirq < 16)
+ return -EINVAL;
+
+ if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+ return -EINVAL;
+
+ spin_lock(&irq_controller_lock);
+
+ val = readl(base + GIC_DIST_CONFIG + confoff);
+ if (type == IRQ_TYPE_LEVEL_HIGH)
+ val &= ~confmask;
+ else if (type == IRQ_TYPE_EDGE_RISING)
+ val |= confmask;
+
+ /*
+ * As recommended by the spec, disable the interrupt before changing
+ * the configuration
+ */
+ if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+ writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+ enabled = true;
+ }
+
+ writel(val, base + GIC_DIST_CONFIG + confoff);
+
+ if (enabled)
+ writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+ spin_unlock(&irq_controller_lock);
+
+ return 0;
+}
+
#ifdef CONFIG_SMP
static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
{
@@ -161,6 +206,7 @@
.ack = gic_ack_irq,
.mask = gic_mask_irq,
.unmask = gic_unmask_irq,
+ .set_type = gic_set_type,
#ifdef CONFIG_SMP
.set_affinity = gic_set_cpu,
#endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 6f80665..ac2fd44 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -185,13 +185,10 @@
},
};
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
{
unsigned int sz = SZ_1M >> PAGE_SHIFT;
- if (node != 0)
- sz = 0;
-
size[1] = size[0] - sz;
size[0] = sz;
}
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
deleted file mode 100644
index 816fc42..0000000
--- a/arch/arm/configs/lusl7200_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_ARCH_L7200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x00010000
-CONFIG_ZBOOT_ROM_BSS=0xf03e0000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-CONFIG_BINFMT_AOUT=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_EXT2_FS=y
-CONFIG_DEBUG_USER=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index df15a0d..8ec9ef5 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -19,10 +19,26 @@
#ifndef __ASSEMBLY__
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ *
+ * Function copies machine registers from @oldregs to @newregs. If @oldregs is
+ * %NULL then current registers are stored there.
+ */
static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs) { }
+ struct pt_regs *oldregs)
+{
+ if (oldregs) {
+ memcpy(newregs, oldregs, sizeof(*newregs));
+ } else {
+ __asm__ __volatile__ ("stmia %0, {r0 - r15}"
+ : : "r" (&newregs->ARM_r0));
+ __asm__ __volatile__ ("mrs %0, cpsr"
+ : "=r" (newregs->ARM_cpsr));
+ }
+}
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 5ee6f85..8a0dd18 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -38,6 +38,7 @@
void (*fixup)(struct machine_desc *,
struct tag *, char **,
struct meminfo *);
+ void (*reserve)(void);/* reserve mem blocks */
void (*map_io)(void);/* IO mapping function */
void (*init_irq)(void);
struct sys_timer *timer; /* system tick timer */
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
new file mode 100644
index 0000000..fdbc43b
--- /dev/null
+++ b/arch/arm/include/asm/memblock.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_ARM_MEMBLOCK_H
+#define _ASM_ARM_MEMBLOCK_H
+
+#ifdef CONFIG_MMU
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT 0
+#endif
+
+struct meminfo;
+struct machine_desc;
+
+extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
+
+#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index ab08d97..23c2e8e 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -167,7 +167,7 @@
#endif
#ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
+#define arch_adjust_zones(size,holes) do { } while (0)
#elif !defined(CONFIG_ZONE_DMA)
#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
#endif
@@ -243,76 +243,11 @@
* virt_to_page(k) convert a _valid_ virtual address to struct page *
* virt_addr_valid(k) indicates whether a virtual address is valid
*/
-#ifndef CONFIG_DISCONTIGMEM
-
#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
-#define PHYS_TO_NID(addr) (0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex. We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr) \
- (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- * PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
- (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
- (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
deleted file mode 100644
index ae63a4f..0000000
--- a/arch/arm/include/asm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/include/asm/mmzone.h
- *
- * 1999-12-29 Nicolas Pitre Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid) (&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
-
-#include <mach/memory.h>
-
-#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f392fb4..f1e5a9b 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,8 +201,7 @@
struct membank {
unsigned long start;
unsigned long size;
- unsigned short node;
- unsigned short highmem;
+ unsigned int highmem;
};
struct meminfo {
@@ -212,9 +211,8 @@
extern struct meminfo meminfo;
-#define for_each_nodebank(iter,mi,no) \
- for (iter = 0; iter < (mi)->nr_banks; iter++) \
- if ((mi)->bank[iter].node == no)
+#define for_each_bank(iter,mi) \
+ for (iter = 0; iter < (mi)->nr_banks; iter++)
#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 26d302c..ea023c6 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -39,6 +39,7 @@
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_HAVE_TCM) += tcm.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
new file mode 100644
index 0000000..cd3b853
--- /dev/null
+++ b/arch/arm/kernel/crash_dump.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/kernel/crash_dump.c
+ *
+ * Copyright (C) 2010 Nokia Corporation.
+ * Author: Mika Westerberg
+ *
+ * This code is taken from arch/x86/kernel/crash_dump_64.c
+ * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ * Copyright (C) IBM Corporation, 2004. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* stores the physical address of elf header of crash image */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is int he user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset,
+ int userbuf)
+{
+ void *vaddr;
+
+ if (!csize)
+ return 0;
+
+ vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+ if (!vaddr)
+ return -ENOMEM;
+
+ if (userbuf) {
+ if (copy_to_user(buf, vaddr + offset, csize)) {
+ iounmap(vaddr);
+ return -EFAULT;
+ }
+ } else {
+ memcpy(buf, vaddr + offset, csize);
+ }
+
+ iounmap(vaddr);
+ return csize;
+}
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index df5958f..1fc74cb 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -39,6 +39,10 @@
void machine_crash_shutdown(struct pt_regs *regs)
{
+ local_irq_disable();
+ crash_save_cpu(regs, smp_processor_id());
+
+ printk(KERN_INFO "Loading crashdump kernel...\n");
}
void machine_kexec(struct kimage *image)
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 61930eb0..fd26f8d 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -10,6 +10,12 @@
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
+ /*
+ * If there is no indirection page (we are doing crashdumps)
+ * skip any relocation.
+ */
+ cmp r0, #0
+ beq 2f
0: /* top, read another word for the indirection page */
ldr r3, [r0],#4
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 648c3c1..776ea1a 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -19,12 +19,15 @@
#include <linux/seq_file.h>
#include <linux/screen_info.h>
#include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
+#include <linux/memblock.h>
#include <asm/unified.h>
#include <asm/cpu.h>
@@ -419,13 +422,12 @@
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
bank->size = size & PAGE_MASK;
- bank->node = PHYS_TO_NID(start);
/*
* Check whether this memory region has non-zero size or
* invalid node number.
*/
- if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+ if (bank->size == 0)
return -EINVAL;
meminfo.nr_banks++;
@@ -680,6 +682,79 @@
}
arch_initcall(customize_machine);
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+ unsigned long total;
+
+ total = max_low_pfn - min_low_pfn;
+ return total << PAGE_SHIFT;
+}
+
+/**
+ * reserve_crashkernel() - reserves memory are for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by a dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+ unsigned long long crash_size, crash_base;
+ unsigned long long total_mem;
+ int ret;
+
+ total_mem = get_total_mem();
+ ret = parse_crashkernel(boot_command_line, total_mem,
+ &crash_size, &crash_base);
+ if (ret)
+ return;
+
+ ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+ if (ret < 0) {
+ printk(KERN_WARNING "crashkernel reservation failed - "
+ "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+ return;
+ }
+
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel (System RAM: %ldMB)\n",
+ (unsigned long)(crash_size >> 20),
+ (unsigned long)(crash_base >> 20),
+ (unsigned long)(total_mem >> 20));
+
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
+}
+#else
+static inline void reserve_crashkernel(void) {}
+#endif /* CONFIG_KEXEC */
+
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+ char *end;
+
+ if (!arg)
+ return -EINVAL;
+
+ elfcorehdr_addr = memparse(arg, &end);
+ return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif /* CONFIG_CRASH_DUMP */
+
void __init setup_arch(char **cmdline_p)
{
struct tag *tags = (struct tag *)&init_tags;
@@ -733,12 +808,15 @@
parse_early_param();
+ arm_memblock_init(&meminfo, mdesc);
+
paging_init(mdesc);
request_standard_resources(&meminfo, mdesc);
#ifdef CONFIG_SMP
smp_init_cpus();
#endif
+ reserve_crashkernel();
cpu_init();
tcm_init();
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 030ba72..59ff42d 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@
endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_L7200) += io-acorn.o
lib-$(CONFIG_ARCH_SHARK) += io-shark.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index c008225..4f93c56 100644
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -14,14 +14,4 @@
#define PHYS_OFFSET UL(0xf0000000)
-/*
- * The nodes are the followings:
- *
- * node 0: 0xf000.0000 - 0xf3ff.ffff
- * node 1: 0xf400.0000 - 0xf7ff.ffff
- * node 2: 0xf800.0000 - 0xfbff.ffff
- * node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS 26
-
#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841eaf8..939bccd 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -366,6 +366,17 @@
endif
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+ bool "Bluewater Systems Snapper 9260/9G20 module"
+ help
+ Select this if you are using the Bluewater Systems Snapper 9260 or
+ Snapper 9G20 modules.
+ <http://www.bluewatersys.com/>
+endif
+
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c1f821e..ca2ac00 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,6 +66,9 @@
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
+
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 85166b7..753c0d3 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
#include "generic.h"
#include "clock.h"
@@ -176,6 +177,13 @@
.type = CLK_TYPE_PERIPHERAL,
};
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+ .name = "vdec_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_VDEC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
/* One additional fake clock for ohci */
static struct clk ohci_clk = {
.name = "ohci_clk",
@@ -239,6 +247,9 @@
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+ clk_register(&vdec_clk);
+
clk_register(&pck0);
clk_register(&pck1);
}
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a4102d7..c49f5c0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -26,6 +26,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -235,6 +238,46 @@
}
};
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("AVDD", "0-001b"),
+ REGULATOR_SUPPLY("HPVDD", "0-001b"),
+ REGULATOR_SUPPLY("DBVDD", "0-001b"),
+ REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = ek_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 0,
+ .init_data = &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_vdd_pdata,
+ },
+};
+static void __init ek_add_regulators(void)
+{
+ platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@@ -256,6 +299,8 @@
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
+ /* Regulators */
+ ek_add_regulators();
/* MMC */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &ek_mmc_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c11fd47..6ea9808 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -27,6 +27,9 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -269,6 +272,46 @@
static void __init ek_add_device_buttons(void) {}
#endif
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("AVDD", "0-001b"),
+ REGULATOR_SUPPLY("HPVDD", "0-001b"),
+ REGULATOR_SUPPLY("DBVDD", "0-001b"),
+ REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = ek_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 0,
+ .init_data = &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_vdd_pdata,
+ },
+};
+static void __init ek_add_regulators(void)
+{
+ platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
@@ -294,6 +337,8 @@
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
+ /* Regulators */
+ ek_add_regulators();
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
new file mode 100644
index 0000000..2c08ae4
--- /dev/null
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ * Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+ at91sam9260_initialize(18432000);
+
+ /* Debug on ttyS0 */
+ at91_register_uart(0, 0, 0);
+ at91_set_serial_console(0);
+
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+ .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
+ .vbus_active_low = 1,
+ .vbus_polled = 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+ .is_rmii = 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+ {
+ .name = "Preboot",
+ .offset = 0,
+ .size = SZ_128K,
+ },
+ {
+ .name = "Bootloader",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+ return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .partition_info = snapper9260_nand_partition_info,
+ .bus_width_16 = 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 0,
+ .ncs_write_setup = 0,
+ .nwe_setup = 0,
+
+ .ncs_read_pulse = 5,
+ .nrd_pulse = 2,
+ .ncs_write_pulse = 5,
+ .nwe_pulse = 2,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE),
+ .tdf_cycles = 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+ .gpio_base = SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+ {
+ /* IO expander */
+ I2C_BOARD_INFO("max7312", 0x28),
+ .platform_data = &snapper9260_io_expander_data,
+ },
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+ {
+ /* RTC */
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+ at91_set_A_periph(AT91_PIN_PC14, 0);
+ sam9_smc_configure(3, &snapper9260_nand_smc_config);
+ at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+ at91_add_device_i2c(snapper9260_i2c_devices,
+ ARRAY_SIZE(snapper9260_i2c_devices));
+ at91_add_device_serial();
+ at91_add_device_usbh(&snapper9260_usbh_data);
+ at91_add_device_udc(&snapper9260_udc_data);
+ at91_add_device_eth(&snapper9260_macb_data);
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+ ATMEL_SSC_TD | ATMEL_SSC_RD));
+ snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = snapper9260_map_io,
+ .init_irq = snapper9260_init_irq,
+ .init_machine = snapper9260_board_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index d8c1ede..9c6af97 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -84,7 +84,7 @@
*/
#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index 1499b1c..976f4a6 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -15,7 +15,7 @@
#ifndef AT91CAP9_DDRSDR_H
#define AT91CAP9_DDRSDR_H
-#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
+#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
#define AT91_DDRSDRC_MODE_NORMAL 0
#define AT91_DDRSDRC_MODE_NOP 1
@@ -25,10 +25,10 @@
#define AT91_DDRSDRC_MODE_EXT_LMR 5
#define AT91_DDRSDRC_MODE_DEEP 6
-#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
+#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
@@ -49,7 +49,7 @@
#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
@@ -59,13 +59,13 @@
#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
+#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -80,14 +80,14 @@
#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
+#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
+#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
@@ -98,5 +98,11 @@
#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 43c396b..4e79036 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -84,7 +84,7 @@
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 87de8be..2b56185 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,7 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
new file mode 100644
index 0000000..d27b15b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
+#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */
+#define AT91_DDRSDRC_MODE_NORMAL 0
+#define AT91_DDRSDRC_MODE_NOP 1
+#define AT91_DDRSDRC_MODE_PRECHARGE 2
+#define AT91_DDRSDRC_MODE_LMR 3
+#define AT91_DDRSDRC_MODE_REFRESH 4
+#define AT91_DDRSDRC_MODE_EXT_LMR 5
+#define AT91_DDRSDRC_MODE_DEEP 6
+
+#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_DDRSDRC_NR_11 (0 << 2)
+#define AT91_DDRSDRC_NR_12 (1 << 2)
+#define AT91_DDRSDRC_NR_13 (2 << 2)
+#define AT91_DDRSDRC_NR_14 (3 << 2)
+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
+#define AT91_DDRSDRC_CAS_2 (2 << 4)
+#define AT91_DDRSDRC_CAS_3 (3 << 4)
+#define AT91_DDRSDRC_CAS_25 (6 << 4)
+#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
+#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */
+#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */
+#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */
+#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
+#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
+#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */
+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */
+#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
+#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
+#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
+#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_DDRSDRC_LPCB_DISABLE 0
+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */
+#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD_SDR 0
+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
+#define AT91_DDRSDRC_MD_DDR2 6
+#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
+#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
+
+#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
+
+#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */
+#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */
+#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
+#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
+#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */
+#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
+#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index b726038..100f5a5 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -17,7 +17,7 @@
#define AT91SAM9_SDRAMC_H
/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */
#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
#define AT91_SDRAMC_MODE_NORMAL 0
#define AT91_SDRAMC_MODE_NOP 1
@@ -27,10 +27,10 @@
#define AT91_SDRAMC_MODE_EXT_LMR 5
#define AT91_SDRAMC_MODE_DEEP 6
-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */
#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */
#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
#define AT91_SDRAMC_NC_8 (0 << 0)
#define AT91_SDRAMC_NC_9 (1 << 0)
@@ -57,7 +57,7 @@
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_SDRAMC_LPCB_DISABLE 0
#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
@@ -71,16 +71,21 @@
#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */
#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */
#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_SDRAMC##num + reg, value)
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index fc2de6c..87ba851 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -74,7 +74,7 @@
*/
#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index df2ed84..58528aa 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,6 +44,8 @@
/* USB Device */
struct at91_udc_data {
u8 vbus_pin; /* high == host powering us */
+ u8 vbus_active_low; /* vbus polarity */
+ u8 vbus_polled; /* Use polling, not interrupt */
u8 pullup_pin; /* active == D+ pulled up */
u8 pullup_active_low; /* true == pullup_pin is active low */
};
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 833659d..3bef931 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -52,6 +52,7 @@
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
+#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@
#ifdef CONFIG_ARCH_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
#else
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
+#define cpu_is_at91sam9m10() (0)
+#define cpu_is_at91sam9g46() (0)
+#define cpu_is_at91sam9m11() (0)
#endif
#ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 04c91e3..bfdd8ab 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -19,6 +19,7 @@
#define PIN_BASE NR_AIC_IRQS
#define MAX_GPIO_BANKS 5
+#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32))
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 08322c4..8c87d0c 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -30,14 +30,50 @@
{
u32 saved_lpr, lpr;
- saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+ saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
return saved_lpr;
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ /* Those tow values allow us to delay self-refresh activation
+ * to the maximum. */
+ u32 lpr0, lpr1;
+ u32 saved_lpr0;
+
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+ lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+ return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0) \
+ do { \
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+ } while (0)
#else
#include <mach/at91sam9_sdramc.h>
@@ -47,7 +83,6 @@
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
*/
-#define AT91_SDRAMC AT91_SDRAMC0
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
@@ -55,13 +90,13 @@
{
u32 saved_lpr, lpr;
- saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+ saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
return saved_lpr;
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
#endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 9c5b48e..b6b00a1 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,10 +16,12 @@
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200_mc.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
#endif
@@ -30,7 +32,6 @@
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
*/
-#define AT91_SDRAMC AT91_SDRAMC0
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
@@ -113,12 +114,14 @@
/*
* Register usage:
* R1 = Base address of AT91_PMC
- * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+ * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* R3 = temporary register
* R4 = temporary register
+ * R5 = Base address of second RAM Controller or 0 if not present
*/
ldr r1, .at91_va_base_pmc
ldr r2, .at91_va_base_sdramc
+ ldr r5, .at91_va_base_ramc1
/* Drain write buffer */
mcr p15, 0, r0, c7, c10, 4
@@ -127,20 +130,33 @@
/* Put SDRAM in self-refresh mode */
mov r3, #1
str r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
- /* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
- str r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
- mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+ /* prepare for DDRAM self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, #AT91_DDRSDRC_LPCB
+ orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+ /* figure out if we use the second ram controller */
+ cmp r5, #0
+ ldrne r4, [r5, #AT91_DDRSDRC_LPR]
+ strne r4, .saved_sam9_lpr1
+ bicne r4, #AT91_DDRSDRC_LPCB
+ orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+ /* Enable DDRAM self-refresh mode */
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+ strne r4, [r5, #AT91_DDRSDRC_LPR]
#else
/* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ ldr r3, [r2, #AT91_SDRAMC_LPR]
str r3, .saved_sam9_lpr
- mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ bic r3, #AT91_SDRAMC_LPCB
+ orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_SDRAMC_LPR]
#endif
/* Save Master clock setting */
@@ -247,14 +263,21 @@
#ifdef CONFIG_ARCH_AT91RM9200
/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
- /* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
+ /* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* if we use the second ram controller */
+ cmp r5, #0
+ ldrne r4, .saved_sam9_lpr1
+ strne r4, [r5, #AT91_DDRSDRC_LPR]
+
#else
- /* Restore LPR on AT91SAM9 */
+ /* Restore LPR on AT91 with SDRAM */
ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ str r3, [r2, #AT91_SDRAMC_LPR]
#endif
/* Restore registers, and return */
@@ -273,18 +296,29 @@
.saved_sam9_lpr:
.word 0
+.saved_sam9_lpr1:
+ .word 0
+
.at91_va_base_pmc:
.word AT91_VA_BASE_SYS + AT91_PMC
#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_DDRSDRC
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC0
#else
.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_SDRAMC
+ .word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+ .word 0
#endif
ENTRY(at91_slow_clock_sz)
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 72e405d..d3f959e 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -91,14 +91,23 @@
.parent = &pll1_clk,
};
+static struct clk dummy_apb_pclk = {
+ .name = "BUSCLK",
+ .type = CLK_TYPE_PRIMARY,
+ .mode = CLK_MODE_XTAL,
+};
+
static struct clk_lookup lookups[] = {
- { /* UART0 */
- .dev_id = "uarta",
- .clk = &uart_clk,
- }, { /* UART1 */
- .dev_id = "uartb",
- .clk = &uart_clk,
- }
+ { /* Bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
+ .dev_id = "uarta",
+ .clk = &uart_clk,
+ }, { /* UART1 */
+ .dev_id = "uartb",
+ .clk = &uart_clk,
+ }
};
static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index dbaae5f..eb34bd1 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -30,7 +30,6 @@
config ARCH_EDB7211
bool "EDB7211"
select ISA
- select ARCH_DISCONTIGMEM_ENABLE
select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
help
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 09fb57e..3c3bf45 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -32,7 +32,6 @@
mi->nr_banks=1;
mi->bank[0].start = 0xc0000000;
mi->bank[0].size = 0x01000000;
- mi->bank[0].node = 0;
}
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index dc81cc6..4a7a232 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
+#include <linux/memblock.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -29,6 +30,12 @@
extern void edb7211_map_io(void);
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+ memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
static void __init
fixup_edb7211(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
@@ -43,10 +50,8 @@
*/
mi->bank[0].start = 0xc0000000;
mi->bank[0].size = 8*1024*1024;
- mi->bank[0].node = 0;
mi->bank[1].start = 0xc1000000;
mi->bank[1].size = 8*1024*1024;
- mi->bank[1].node = 1;
mi->nr_banks = 2;
}
@@ -57,6 +62,7 @@
.boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
+ .reserve = edb7211_reserve,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 7430e40..a696099 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -39,7 +39,6 @@
{
.start = 0xC0000000,
.size = 0x01000000,
- .node = 0
},
},
};
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index fedd807..072cc6b 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,6 +11,7 @@
*
*/
+#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro addruart, rx, tmp
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index f70d52b..f45c8e8 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -20,7 +20,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-
/*
* Physical DRAM offset.
*/
@@ -72,7 +71,6 @@
* node 2: 0xd0000000 - 0xd7ffffff
* node 3: 0xd8000000 - 0xdfffffff
*/
-#define NODE_MEM_SIZE_BITS 24
#define SECTION_SIZE_BITS 24
#define MAX_PHYSMEM_BITS 32
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 2ec3095..b280efb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -25,6 +25,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
#include <linux/mfd/tps6507x.h>
#include <linux/input/tps6507x-ts.h>
@@ -469,6 +470,11 @@
},
};
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+ .defdcdc_default = true,
+};
+
struct regulator_init_data tps65070_regulator_data[] = {
/* dcdc1 */
{
@@ -494,6 +500,7 @@
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
.consumer_supplies = tps65070_dcdc2_consumers,
+ .driver_data = &tps6507x_platform_data,
},
/* dcdc3 */
@@ -507,6 +514,7 @@
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
.consumer_supplies = tps65070_dcdc3_consumers,
+ .driver_data = &tps6507x_platform_data,
},
/* ldo1 */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index a91edfb..22eb97c 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -48,19 +48,16 @@
* below 128M
*/
static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+__arch_adjust_zones(unsigned long *size, unsigned long *holes)
{
unsigned int sz = (128<<20) >> PAGE_SHIFT;
- if (node != 0)
- sz = 0;
-
size[1] = size[0] - sz;
size[0] = sz;
}
-#define arch_adjust_zones(node, zone_size, holes) \
- if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+#define arch_adjust_zones(zone_size, holes) \
+ if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20))
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3a1a855..f744f67 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
@@ -21,26 +20,6 @@
#include <asm/mach/arch.h>
-static struct physmap_flash_data adssphere_flash_data = {
- .width = 4,
-};
-
-static struct resource adssphere_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device adssphere_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &adssphere_flash_data,
- },
- .num_resources = 1,
- .resource = &adssphere_flash_resource,
-};
-
static struct ep93xx_eth_data __initdata adssphere_eth_data = {
.phy_id = 1,
};
@@ -48,8 +27,7 @@
static void __init adssphere_init_machine(void)
{
ep93xx_init_devices();
- platform_device_register(&adssphere_flash);
-
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
ep93xx_register_eth(&adssphere_eth_data, 1);
}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e29bdef..7f30397 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -185,7 +185,7 @@
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
- INIT_CK(NULL, "pclk", &clk_p),
+ INIT_CK(NULL, "apb_pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9092677..8e37a04 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -29,6 +29,7 @@
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
@@ -215,8 +216,8 @@
spin_lock_irqsave(&syscon_swlock, flags);
val = __raw_readl(EP93XX_SYSCON_DEVCFG);
- val |= set_bits;
val &= ~clear_bits;
+ val |= set_bits;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(val, EP93XX_SYSCON_DEVCFG);
@@ -348,6 +349,43 @@
/*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ep93xx_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width: bank width in octets
+ * @start: resource start address
+ * @size: resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size)
+{
+ ep93xx_flash_data.width = width;
+
+ ep93xx_flash_resource.start = start;
+ ep93xx_flash_resource.end = start + size - 1;
+
+ platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
* EP93xx ethernet peripheral handling
*************************************************************************/
static struct ep93xx_eth_data ep93xx_eth_data;
@@ -620,6 +658,11 @@
.resource = ep93xx_fb_resource,
};
+static struct platform_device ep93xx_bl_device = {
+ .name = "ep93xx-bl",
+ .id = -1,
+};
+
/**
* ep93xx_register_fb - Register the framebuffer platform device.
* @data: platform specific framebuffer configuration (__initdata)
@@ -628,6 +671,7 @@
{
ep93xxfb_data = *data;
platform_device_register(&ep93xx_fb_device);
+ platform_device_register(&ep93xx_bl_device);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3884182..c2ce903 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -38,39 +37,13 @@
#include <asm/mach/arch.h>
-static struct physmap_flash_data edb93xx_flash_data;
-
-static struct resource edb93xx_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb93xx_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb93xx_flash_data,
- },
- .num_resources = 1,
- .resource = &edb93xx_flash_resource,
-};
-
-static void __init __edb93xx_register_flash(unsigned int width,
- resource_size_t start, resource_size_t size)
-{
- edb93xx_flash_data.width = width;
- edb93xx_flash_resource.start = start;
- edb93xx_flash_resource.end = start + size - 1;
-
- platform_device_register(&edb93xx_flash);
-}
-
static void __init edb93xx_register_flash(void)
{
if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
} else {
- __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
}
}
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index a809618..d97168c 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
@@ -21,26 +20,6 @@
#include <asm/mach/arch.h>
-static struct physmap_flash_data gesbc9312_flash_data = {
- .width = 4,
-};
-
-static struct resource gesbc9312_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device gesbc9312_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &gesbc9312_flash_data,
- },
- .num_resources = 1,
- .resource = &gesbc9312_flash_resource,
-};
-
static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
.phy_id = 1,
};
@@ -48,8 +27,7 @@
static void __init gesbc9312_init_machine(void)
{
ep93xx_init_devices();
- platform_device_register(&gesbc9312_flash);
-
+ ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
ep93xx_register_eth(&gesbc9312_eth_data, 0);
}
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 9a4413d..a6c0917 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -43,6 +43,9 @@
unsigned int ep93xx_chip_revision(void);
+void ep93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size);
+
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
struct i2c_board_info *devices, int num);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 1cc911b..2ba7763 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -31,31 +30,6 @@
* Micro9-Lite uses a separate MTD map driver for flash support
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
*************************************************************************/
-static struct physmap_flash_data micro9_flash_data;
-
-static struct resource micro9_flash_resource = {
- .start = EP93XX_CS1_PHYS_BASE,
- .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device micro9_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = µ9_flash_data,
- },
- .num_resources = 1,
- .resource = µ9_flash_resource,
-};
-
-static void __init __micro9_register_flash(unsigned int width)
-{
- micro9_flash_data.width = width;
-
- platform_device_register(µ9_flash);
-}
-
static unsigned int __init micro9_detect_bootwidth(void)
{
u32 v;
@@ -70,10 +44,17 @@
static void __init micro9_register_flash(void)
{
+ unsigned int width;
+
if (machine_is_micro9())
- __micro9_register_flash(4);
+ width = 4;
else if (machine_is_micro9m() || machine_is_micro9s())
- __micro9_register_flash(micro9_detect_bootwidth());
+ width = micro9_detect_bootwidth();
+ else
+ width = 0;
+
+ if (width)
+ ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
}
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 388aec9..5dded58 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -29,26 +28,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static struct physmap_flash_data simone_flash_data = {
- .width = 2,
-};
-
-static struct resource simone_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device simone_flash = {
- .name = "physmap-flash",
- .id = 0,
- .num_resources = 1,
- .resource = &simone_flash_resource,
- .dev = {
- .platform_data = &simone_flash_data,
- },
-};
-
static struct ep93xx_eth_data __initdata simone_eth_data = {
.phy_id = 1,
};
@@ -77,8 +56,7 @@
static void __init simone_init_machine(void)
{
ep93xx_init_devices();
-
- platform_device_register(&simone_flash);
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
ep93xx_register_eth(&simone_eth_data, 1);
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index ae7319e..93aeab8 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -17,7 +17,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/m48t86.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -173,31 +172,13 @@
};
-/*************************************************************************
- * NOR flash (TS-7200 only)
- *************************************************************************/
-static struct physmap_flash_data ts72xx_nor_data = {
- .width = 2,
-};
-
-static struct resource ts72xx_nor_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ts72xx_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev.platform_data = &ts72xx_nor_data,
- .resource = &ts72xx_nor_resource,
- .num_resources = 1,
-};
-
static void __init ts72xx_register_flash(void)
{
+ /*
+ * TS7200 has NOR flash all other TS72xx board have NAND flash.
+ */
if (board_is_ts7200()) {
- platform_device_register(&ts72xx_nor_flash);
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
} else {
resource_size_t start;
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index e3bc3f6..88b3dd8 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -232,7 +232,7 @@
unsigned long __pfn_to_bus(unsigned long pfn)
{
- return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+ return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
}
EXPORT_SYMBOL(__pfn_to_bus);
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index a9ee8f0..27cafd1 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,8 +11,10 @@
*
*/
- .equ io_virt, IO_BASE
- .equ io_phys, IO_START
+#include <mach/hardware.h>
+
+ .equ io_virt, IO_VIRT
+ .equ io_phys, IO_PHYS
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
new file mode 100644
index 0000000..5f96e15
--- /dev/null
+++ b/arch/arm/mach-integrator/common.h
@@ -0,0 +1 @@
+void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index b02cfc0..8f4fb6d 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/memblock.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/termios.h>
@@ -30,6 +31,7 @@
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
+#include <asm/pgtable.h>
static struct amba_pl010_data integrator_uart_data;
@@ -119,8 +121,13 @@
.rate = 14745600,
};
+static struct clk dummy_apb_pclk;
+
static struct clk_lookup lookups[] = {
- { /* UART0 */
+ { /* Bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
}, { /* UART1 */
@@ -215,3 +222,13 @@
}
EXPORT_SYMBOL(cm_control);
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+ memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 227cf4d..6ab5a03 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -48,6 +48,8 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include "common.h"
+
/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
* is the (PA >> 12).
@@ -502,6 +504,7 @@
.io_pg_offst = ((0xf1600000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ap_map_io,
+ .reserve = integrator_reserve,
.init_irq = ap_init_irq,
.timer = &ap_timer,
.init_machine = ap_init,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index cde57b2..05db40e 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -43,6 +43,8 @@
#include <plat/timer-sp.h>
+#include "common.h"
+
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_FLASH_SIZE SZ_32M
@@ -601,6 +603,7 @@
.io_pg_offst = ((0xf1600000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = intcp_map_io,
+ .reserve = integrator_reserve,
.init_irq = intcp_init_irq,
.timer = &cp_timer,
.init_machine = intcp_init,
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 25b1da9..7415e43 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -69,6 +69,4 @@
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
-#define PFN_TO_NID(addr) (0)
-
#endif
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index f4fbb5e..61cd4d6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -348,7 +348,7 @@
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
-void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+void __init ixp4xx_adjust_zones(unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -356,7 +356,7 @@
/*
* Only adjust if > 64M on current system
*/
- if (node || (zone_size[0] <= sz))
+ if (zone_size[0] <= sz)
return;
zone_size[1] = zone_size[0] - sz;
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 98f5e5e..0136eaa 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -16,10 +16,10 @@
#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
-#define arch_adjust_zones(node, size, holes) \
- ixp4xx_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+ ixp4xx_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (SZ_64M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 7221c20..f781164 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -77,7 +77,7 @@
},
};
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
{
spi_register_board_info(qnap_tsx1x_spi_slave_info,
ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
index 9a59296..7fa0373 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -1,7 +1,7 @@
#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
extern void qnap_tsx1x_power_off(void);
#endif
diff --git a/arch/arm/mach-l7200/Makefile b/arch/arm/mach-l7200/Makefile
deleted file mode 100644
index 4bd8ebd..0000000
--- a/arch/arm/mach-l7200/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o
-obj-m :=
-obj-n :=
-obj- :=
-
diff --git a/arch/arm/mach-l7200/Makefile.boot b/arch/arm/mach-l7200/Makefile.boot
deleted file mode 100644
index 6c72ecb..0000000
--- a/arch/arm/mach-l7200/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y := 0xf0008000
-
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
deleted file mode 100644
index 50d2324..0000000
--- a/arch/arm/mach-l7200/core.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mm/mm-lusl7200.c
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Extra MM routines for L7200 architecture
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <asm/types.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-/*
- * IRQ base register
- */
-#define IRQ_BASE (IO_BASE_2 + 0x1000)
-
-/*
- * Normal IRQ registers
- */
-#define IRQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x000))
-#define IRQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x004))
-#define IRQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x008))
-#define IRQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x00c))
-#define IRQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x010))
-#define IRQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x018))
-
-/*
- * Fast IRQ registers
- */
-#define FIQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x100))
-#define FIQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x104))
-#define FIQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x108))
-#define FIQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x10c))
-#define FIQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x110))
-#define FIQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x118))
-
-static void l7200_mask_irq(unsigned int irq)
-{
- IRQ_ENABLECLEAR = 1 << irq;
-}
-
-static void l7200_unmask_irq(unsigned int irq)
-{
- IRQ_ENABLE = 1 << irq;
-}
-
-static struct irq_chip l7200_irq_chip = {
- .ack = l7200_mask_irq,
- .mask = l7200_mask_irq,
- .unmask = l7200_unmask_irq
-};
-
-static void __init l7200_init_irq(void)
-{
- int irq;
-
- IRQ_ENABLECLEAR = 0xffffffff; /* clear all interrupt enables */
- FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- set_irq_chip(irq, &l7200_irq_chip);
- set_irq_flags(irq, IRQF_VALID);
- set_irq_handler(irq, handle_level_irq);
- }
-
- init_FIQ();
-}
-
-static struct map_desc l7200_io_desc[] __initdata = {
- { IO_BASE, IO_START, IO_SIZE, MT_DEVICE },
- { IO_BASE_2, IO_START_2, IO_SIZE_2, MT_DEVICE },
- { AUX_BASE, AUX_START, AUX_SIZE, MT_DEVICE },
- { FLASH1_BASE, FLASH1_START, FLASH1_SIZE, MT_DEVICE },
- { FLASH2_BASE, FLASH2_START, FLASH2_SIZE, MT_DEVICE }
-};
-
-static void __init l7200_map_io(void)
-{
- iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc));
-}
-
-MACHINE_START(L7200, "LinkUp Systems L7200")
- /* Maintainer: Steve Hill / Scott McConnell */
- .phys_io = 0x80040000,
- .io_pg_offst = ((0xd0000000) >> 18) & 0xfffc,
- .map_io = l7200_map_io,
- .init_irq = l7200_init_irq,
-MACHINE_END
-
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
deleted file mode 100644
index 4671558..0000000
--- a/arch/arm/mach-l7200/include/mach/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 08-02-2000 SJH Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <mach/hardware.h>
-
-#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR 0x00000000
-#define AUX_DIAG_LED_ON 0x00000002
-#define AUX_RTS_UART1 0x00000004
-#define AUX_DTR_UART1 0x00000008
-#define AUX_KBD_COLUMN_12_HIGH 0x00000010
-#define AUX_KBD_COLUMN_12_OFF 0x00000020
-#define AUX_KBD_COLUMN_13_HIGH 0x00000040
-#define AUX_KBD_COLUMN_13_OFF 0x00000080
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
deleted file mode 100644
index b69ed34..0000000
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-l7200/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .equ io_virt, IO_BASE
- .equ io_phys, IO_START
-
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #io_phys @ physical base address
- movne \rx, #io_virt @ virtual address
- add \rx, \rx, #0x00044000 @ UART1
-@ add \rx, \rx, #0x00045000 @ UART2
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0] @ UARTDR
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
deleted file mode 100644
index 1726d91..0000000
--- a/arch/arm/mach-l7200/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
- .equ irq_base_addr, IO_BASE_2
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \irqstat, #irq_base_addr @ Virt addr IRQ regs
- add \irqstat, \irqstat, #0x00001000 @ Status reg
- ldr \irqstat, [\irqstat, #0] @ get interrupts
- mov \irqnr, #0
-1001: tst \irqstat, #1
- addeq \irqnr, \irqnr, #1
- moveq \irqstat, \irqstat, lsr #1
- tsteq \irqnr, #32
- beq 1001b
- teq \irqnr, #32
- .endm
-
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
deleted file mode 100644
index 2b7086a..0000000
--- a/arch/arm/mach-l7200/include/mach/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 07-28-2000 SJH Created file
- * 08-02-2000 SJH Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <mach/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
- unsigned int TIMERLOAD;
- unsigned int TIMERVALUE;
- unsigned int TIMERCONTROL;
- unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE (IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define GPT_PRESCALE_1 0x00000000
-#define GPT_PRESCALE_16 0x00000004
-#define GPT_PRESCALE_256 0x00000008
-#define GPT_MODE_FREERUN 0x00000000
-#define GPT_MODE_PERIODIC 0x00000040
-#define GPT_ENABLE 0x00000080
-#define GPT_BZTOG 0x00000100
-#define GPT_BZMOD 0x00000200
-#define GPT_LOAD_MASK 0x0000ffff
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
deleted file mode 100644
index c7b0a5d..0000000
--- a/arch/arm/mach-l7200/include/mach/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- * arch/arm/mach-l7200/include/mach/gpio.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * GPIO.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF 0x000
-#define PADDR_OFF 0x004
-#define PASBSR_OFF 0x008
-#define PAEENR_OFF 0x00c
-#define PAESNR_OFF 0x010
-#define PAESTR_OFF 0x014
-#define PAIMR_OFF 0x018
-#define PAINT_OFF 0x01c
-
-#define PBDR_OFF 0x020
-#define PBDDR_OFF 0x024
-#define PBSBSR_OFF 0x028
-#define PBIMR_OFF 0x038
-#define PBINT_OFF 0x03c
-
-#define PCDR_OFF 0x040
-#define PCDDR_OFF 0x044
-#define PCSBSR_OFF 0x048
-#define PCIMR_OFF 0x058
-#define PCINT_OFF 0x05c
-
-#define PDDR_OFF 0x060
-#define PDDDR_OFF 0x064
-#define PDSBSR_OFF 0x068
-#define PDEENR_OFF 0x06c
-#define PDESNR_OFF 0x070
-#define PDESTR_OFF 0x074
-#define PDIMR_OFF 0x078
-#define PDINT_OFF 0x07c
-
-#define PEDR_OFF 0x080
-#define PEDDR_OFF 0x084
-#define PESBSR_OFF 0x088
-#define PEEENR_OFF 0x08c
-#define PEESNR_OFF 0x090
-#define PEESTR_OFF 0x094
-#define PEIMR_OFF 0x098
-#define PEINT_OFF 0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN 0x02
-#define BACKLIGHT_EN 0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
deleted file mode 100644
index c31909c..0000000
--- a/arch/arm/mach-l7200/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- * 02-01-2000 RS Created L7200 version, derived from rpc code
- * 03-21-2000 SJH Cleaned up file
- * 04-21-2000 RS Changed mapping of I/O in virtual space
- * 04-25-2000 SJH Removed unused symbols and such
- * 05-05-2000 SJH Complete rewrite
- * 07-31-2000 SJH Added undocumented debug auxillary port to
- * get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- * *_START is the physical address
- * *_SIZE is the size of the region
- * *_BASE is the virtual address
- */
-#define RAM_START 0xf0000000
-#define RAM_SIZE 0x02000000
-#define RAM_BASE 0xc0000000
-
-#define IO_START 0x80000000 /* I/O */
-#define IO_SIZE 0x01000000
-#define IO_BASE 0xd0000000
-
-#define IO_START_2 0x90000000 /* I/O */
-#define IO_SIZE_2 0x01000000
-#define IO_BASE_2 0xd1000000
-
-#define AUX_START 0x1a000000 /* AUX PORT */
-#define AUX_SIZE 0x01000000
-#define AUX_BASE 0xd2000000
-
-#define FLASH1_START 0x00000000 /* FLASH BANK 1 */
-#define FLASH1_SIZE 0x01000000
-#define FLASH1_BASE 0xd3000000
-
-#define FLASH2_START 0x10000000 /* FLASH BANK 2 */
-#define FLASH2_SIZE 0x01000000
-#define FLASH2_BASE 0xd4000000
-
-#define ISA_START 0x20000000 /* ISA */
-#define ISA_SIZE 0x20000000
-#define ISA_BASE 0xe0000000
-
-#define PCIO_BASE IO_BASE
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
deleted file mode 100644
index a770a89..0000000
--- a/arch/arm/mach-l7200/include/mach/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 03-21-2000 SJH Created from arch/arm/mach-nexuspci/include/mach/io.h
- * 08-31-2000 SJH Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
deleted file mode 100644
index 7edffd7..0000000
--- a/arch/arm/mach-l7200/include/mach/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 01-02-2000 RS Create l7200 version
- * 03-28-2000 SJH Removed unused interrupt
- * 07-28-2000 SJH Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- * interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS 32
-
-#define IRQ_STWDOG 0 /* Watchdog timer */
-#define IRQ_PROG 1 /* Programmable interrupt */
-#define IRQ_DEBUG_RX 2 /* Comm Rx debug */
-#define IRQ_DEBUG_TX 3 /* Comm Tx debug */
-#define IRQ_GCTC1 4 /* Timer 1 */
-#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */
-#define IRQ_DMA 6 /* DMA controller */
-#define IRQ_CLCD 7 /* Color LCD controller */
-#define IRQ_SM_RX 8 /* Smart card */
-#define IRQ_SM_TX 9 /* Smart cart */
-#define IRQ_SM_RST 10 /* Smart card */
-#define IRQ_SIB 11 /* Serial Interface Bus */
-#define IRQ_MMC 12 /* MultiMediaCard */
-#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */
-#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */
-#define IRQ_SPI 15 /* SPI slave */
-#define IRQ_UART_1 16 /* UART 1 */
-#define IRQ_UART_2 17 /* UART 2 */
-#define IRQ_IRDA 18 /* IRDA */
-#define IRQ_RTC_TICK 19 /* Real Time Clock tick */
-#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */
-#define IRQ_GPIO 21 /* General Purpose IO */
-#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */
-#define IRQ_M2M 23 /* Memory to memory DMA */
-#define IRQ_RESERVED 24 /* RESERVED, don't use */
-#define IRQ_INTF 25 /* External active low interrupt */
-#define IRQ_INT0 26 /* External active low interrupt */
-#define IRQ_INT1 27 /* External active low interrupt */
-#define IRQ_INT2 28 /* External active low interrupt */
-#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO 30 /* Low batery or external power */
-#define IRQ_MEDIA_CHG 31 /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START 64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
deleted file mode 100644
index 9fb40ed..0000000
--- a/arch/arm/mach-l7200/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- * 03-13-2000 SJH Created
- * 04-13-2000 RS Changed bus macros for new addr
- * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET UL(0xf0000000)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
deleted file mode 100644
index 3959871..0000000
--- a/arch/arm/mach-l7200/include/mach/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- * arch/arm/mach-l7200/include/mach/pmpcon.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * DC/DC converter register.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */
-#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST 0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H)
-
-/* PMPCON = 0x811; // too light and fuzzy
- * PMPCON = 0x844;
- * PMPCON = 0x866; // better color poor depth
- * PMPCON = 0x888; // Darker but better depth
- * PMPCON = 0x899; // Darker even better depth
- * PMPCON = 0x8aa; // too dark even better depth
- * PMPCON = 0X8cc; // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
deleted file mode 100644
index a2da7ae..0000000
--- a/arch/arm/mach-l7200/include/mach/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- * arch/arm/mach-l7200/include/mach/pmu.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * Power Management Unit (PMU).
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */
-#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
- unsigned int CURRENT; /* Current configuration register */
- unsigned int NEXT; /* Next configuration register */
- unsigned int reserved;
- unsigned int RUN; /* Run configuration register */
- unsigned int COMM; /* Configuration command register */
- unsigned int SDRAM; /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg) ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg) ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg) ((reg >> 8) & 0x01)
-#define GET_PLLMUX(reg) ((reg >> 7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01)
-#define GET_FASTBUS(reg) (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */
-#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01)
-#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL 1<<25
-#define CHANGE_NOSTALL 2<<25
-#define CHANGE_STALL 3<<25
-
-#define INTRET 1<<17
-#define OSCEN 1<<16
-#define OSCMUX 1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0 0<<9 /* 3.6864 MHz */
-#define PLLMUL_1 1<<9 /* ?????? MHz */
-#define PLLMUL_5 5<<9 /* 18.432 MHz */
-#define PLLMUL_10 10<<9 /* 36.864 MHz */
-#define PLLMUL_18 18<<9 /* ?????? MHz */
-#define PLLMUL_20 20<<9 /* 73.728 MHz */
-#define PLLMUL_32 32<<9 /* ?????? MHz */
-#define PLLMUL_35 35<<9 /* 129.024 MHz */
-#define PLLMUL_36 36<<9 /* ?????? MHz */
-#define PLLMUL_39 39<<9 /* ?????? MHz */
-#define PLLMUL_40 40<<9 /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1 1<<18
-#define CRCLOCK_2 2<<18
-#define CRCLOCK_4 4<<18
-#define CRCLOCK_8 8<<18
-#define CRCLOCK_16 16<<18
-#define CRCLOCK_32 32<<18
-#define CRCLOCK_63 63<<18
-#define CRCLOCK_127 127<<18
-
-#define PLLEN 1<<8
-#define PLLMUX 1<<7
-#define SDR_STOP 1<<6
-#define SYSCLKEN 1<<5
-
-#define BCLK_DIV_4 2<<3
-#define BCLK_DIV_2 1<<3
-#define BCLK_DIV_1 0<<3
-
-#define SDRB_SEL 1<<2
-#define SDRF_SEL 1<<1
-#define FASTBUS 1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK 1<<1 /* Read-only */
-#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK 1<<3 /* Read-only */
-#define PICEN 1<<4 /* Enable Co-procesor */
-#define PICTEST 1<<5
-
-#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
deleted file mode 100644
index adc05e5..0000000
--- a/arch/arm/mach-l7200/include/mach/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 03-20-2000 SJH Created
- * 03-26-2000 SJH Added flags for serial ports
- * 03-27-2000 SJH Corrected BASE_BAUD value
- * 04-14-2000 RS Made register addr dependent on IO_BASE
- * 05-03-2000 SJH Complete rewrite
- * 05-09-2000 SJH Stripped out architecture specific serial stuff
- * and placed it in a separate file
- * 07-28-2000 SJH Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS \
- /* MAGIC UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \
- { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
deleted file mode 100644
index 645f1c5..0000000
--- a/arch/arm/mach-l7200/include/mach/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 05-09-2000 SJH Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <mach/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE (IO_BASE + 0x00044000)
-#define UART2_BASE (IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR 0x00 /* Tx/Rx data */
-#define RXSTAT 0x04 /* Rx status */
-#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
-#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
-#define UARTCON 0x14 /* control register */
-#define UARTFLG 0x18 /* flag register */
-#define UARTINTSTAT 0x1C /* FIFO IRQ status register */
-#define UARTINTMASK 0x20 /* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110 0x827
-#define BR_1200 0x06e
-#define BR_2400 0x05f
-#define BR_4800 0x02f
-#define BR_9600 0x017
-#define BR_14400 0x00f
-#define BR_19200 0x00b
-#define BR_38400 0x005
-#define BR_57600 0x003
-#define BR_76800 0x002
-#define BR_115200 0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR 0x00 /* No error */
-#define RXSTAT_FRM_ERR 0x01 /* Framing error */
-#define RXSTAT_PAR_ERR 0x02 /* Parity error */
-#define RXSTAT_OVR_ERR 0x04 /* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK 0x01 /* generate break on tx */
-#define UBRLCR_PEN 0x02 /* enable parity */
-#define UBRLCR_PDIS 0x00 /* disable parity */
-#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */
-#define UBRLCR_FIFO 0x10 /* enable FIFO */
-#define UBRLCR_LEN5 0x60 /* word length5 */
-#define UBRLCR_LEN6 0x40 /* word length6 */
-#define UBRLCR_LEN7 0x20 /* word length7 */
-#define UBRLCR_LEN8 0x00 /* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN 0x01 /* Enable UART */
-#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */
-#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */
-#define UARTFLG_UBUSY 0x08 /* Transmitter busy */
-#define UARTFLG_DCD 0x04 /* Data carrier detect */
-#define UARTFLG_DSR 0x02 /* Data set ready */
-#define UARTFLG_CTS 0x01 /* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT 0x01 /* TX interrupt */
-#define UART_RXINT 0x02 /* RX interrupt */
-#define UART_RXERRINT 0x04 /* RX error interrupt */
-#define UART_MSINT 0x08 /* Modem Status interrupt */
-#define UART_UDINT 0x10 /* UART Disabled interrupt */
-#define UART_ALLIRQS 0x1f /* All interrupts */
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
deleted file mode 100644
index 9657287..0000000
--- a/arch/arm/mach-l7200/include/mach/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- * arch/arm/mach-l7200/include/mach/sib.h
- *
- * Registers and helper functions for the Serial Interface Bus.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
- unsigned int MCCR; /* SIB Control Register Offset: 0x00 */
- unsigned int RES1; /* Reserved Offset: 0x04 */
- unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */
- unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */
- unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */
- unsigned int RES2; /* Reserved Offset: 0x14 */
- unsigned int MCSR; /* SIB Status Register Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ 9216000 /* Hertz */
-#define AUDIO_FREQ 5000 /* Hertz */
-#define TELECOM_FREQ 5000 /* Hertz */
-
-#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57 AUDIO_DIVIDE
-#define MCCR_TSD57 (TELECOM_DIVIDE << 8)
-#define MCCR_MCE (1 << 16) /* SIB enable */
-#define MCCR_ECS (1 << 17) /* External Clock Select */
-#define MCCR_ADM (1 << 18) /* A/D Data Sampling */
-#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */
-#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */
-#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE GET_CRC
-#define MCDR2_READ (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
deleted file mode 100644
index e9729a3..0000000
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- * arch/arm/mach-l7200/include/mach/sys-clock.h
- *
- * Registers and helper functions for the L7200 Link-Up Systems
- * System clocks.
- *
- * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
-#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
- unsigned int ENABLE;
- unsigned int ESYNC;
- unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN 1<<0
-#define B18M_EN 1<<1
-#define CLK3M6_EN 1<<2
-#define BUART_EN 1<<3
-#define CLK18MU_EN 1<<4
-#define FIR_EN 1<<5
-#define MIRN_EN 1<<6
-#define UARTM_EN 1<<7
-#define SIBADC_EN 1<<8
-#define ALTD_EN 1<<9
-#define CLCLK_EN 1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV 1<<0
-#define MIR_SEL 1<<1
-#define SSP_SEL 1<<4
-#define MM_DIV 1<<5
-#define MM_SEL 1<<6
-#define ADC_SEL_2 0<<7
-#define ADC_SEL_4 1<<7
-#define ADC_SEL_8 3<<7
-#define ADC_SEL_16 7<<7
-#define ADC_SEL_32 0x0f<<7
-#define ADC_SEL_64 0x1f<<7
-#define ADC_SEL_128 0x3f<<7
-#define ALTD_SEL 1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
deleted file mode 100644
index e0dd3b6..0000000
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- * 03-21-2000 SJH Created
- * 04-26-2000 SJH Fixed functions
- * 05-03-2000 SJH Removed usage of obsolete 'iomd.h'
- * 05-31-2000 SJH Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-
-static inline void arch_idle(void)
-{
- *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- cpu_reset(0);
- }
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
deleted file mode 100644
index 061771c..0000000
--- a/arch/arm/mach-l7200/include/mach/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 01-02-2000 RS Created l7200 version, derived from rpc code
- * 05-03-2000 SJH Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <mach/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE (IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32 0x00 /* 32 Hz tick */
-#define RTC_RATE_64 0x10 /* 64 Hz tick */
-#define RTC_RATE_128 0x20 /* 128 Hz tick */
-#define RTC_RATE_256 0x30 /* 256 Hz tick */
-#define RTC_EN_ALARM 0x01 /* Enable alarm */
-#define RTC_EN_TIC 0x04 /* Enable counter */
-#define RTC_EN_STWDOG 0x08 /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
-#endif
- do_profile(regs);
- RTC_RTCC = 0; /* Clear interrupt */
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
- RTC_RTCC = 0; /* Clear interrupt */
-
- timer_irq.handler = timer_interrupt;
-
- setup_irq(IRQ_RTC_TICK, &timer_irq);
-
- RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
deleted file mode 100644
index ffc96a6..0000000
--- a/arch/arm/mach-l7200/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000 RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- * must be changed when choosing a different tick
- * rate. The value of HZ in 'param.h' must also
- * be changed to match below.
- */
-#define CLOCK_TICK_RATE 128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
deleted file mode 100644
index 591c962..0000000
--- a/arch/arm/mach-l7200/include/mach/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- * 05-01-2000 SJH Created
- * 05-13-2000 SJH Filled in function bodies
- * 07-26-2000 SJH Removed hard coded baud rate
- */
-
-#include <mach/hardware.h>
-
-#define IO_UART IO_START + 0x00044000
-
-#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p) (*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
- while(__raw_readb(IO_UART + 0x18) & 0x20 ||
- __raw_readb(IO_UART + 0x18) & 0x08)
- barrier();
-
- __raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
- __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */
- __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */
- __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
deleted file mode 100644
index 85f0abb..0000000
--- a/arch/arm/mach-l7200/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/vmalloc.h
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 189d20e..edb8f5f 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -19,50 +19,6 @@
*/
#define PHYS_OFFSET UL(0xc0000000)
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define KVADDR_TO_NID(addr) \
- ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\
- | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else /* 2 banks per node */
-# define KVADDR_TO_NID(addr) \
- (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define PFN_TO_NID(pfn) \
- (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else /* 2 banks per node */
-# define PFN_TO_NID(pfn) \
- (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-# define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else /* 2 banks per node */
-# define LOCAL_MAP_NR(addr) \
- (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
/*
* Sparsemem version of the above
*/
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index dca5a5f..e69a150 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -50,7 +50,6 @@
{
mi->nr_banks = 1;
mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
mi->bank[0].size = (101*1024*1024);
}
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index f035f41..89f793a 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -53,6 +53,10 @@
}
static struct clk_lookup lookups[] = {
+ {
+ .con_id = "apb_pclk",
+ .clk = &clk_default,
+ },
CLK(&clk_24, "mtu0"),
CLK(&clk_24, "mtu1"),
CLK(&clk_48, "uart0"),
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 0859336..5c934bd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
* the Free Software Foundation.
*/
#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/regs-board-a9m9750dev.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 1b12d32..770a68c 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -20,50 +20,49 @@
/* nothing */
}
+static int timeout;
+
static void putc_ns9360(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (__raw_readl(base + 8) & (1 << 3)) {
__raw_writeb(c, base + 16);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
static void putc_a9m9750dev(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (__raw_readb(base + 5) & (1 << 5)) {
__raw_writeb(c, base);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
static void putc_ns921x(char c, void __iomem *base)
{
- static int t = 0x10000;
do {
- if (t)
- --t;
+ if (timeout)
+ --timeout;
if (!(__raw_readl(base) & (1 << 11))) {
__raw_writeb(c, base + 0x0028);
- t = 0x10000;
+ timeout = 0x10000;
break;
}
- } while (t);
+ } while (timeout);
}
#define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@
static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
{
+ timeout = 0x10000;
if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
/* ns9360 or ns9750 */
if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fdd1dd5..0a9d61d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -301,6 +301,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = ams_delta_map_io,
+ .reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
.init_machine = ams_delta_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed..059bac6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -378,6 +378,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_fsample_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e1195a3..7a65684 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -98,6 +98,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_generic_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d1100e4..68b2bed 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -467,6 +467,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = h2_map_io,
+ .reserve = omap_reserve,
.init_irq = h2_init_irq,
.init_machine = h2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index a53ab82..0b0825f 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -437,6 +437,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = h3_map_io,
+ .reserve = omap_reserve,
.init_irq = h3_init_irq,
.init_machine = h3_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 8e313b4..d70a4f0 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -304,6 +304,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = htcherald_map_io,
+ .reserve = omap_reserve,
.init_irq = htcherald_init_irq,
.init_machine = htcherald_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 5d12fd3..91064b3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -463,6 +463,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = innovator_map_io,
+ .reserve = omap_reserve,
.init_irq = innovator_init_irq,
.init_machine = innovator_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 71e1a3f..8c28b10 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -400,6 +400,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_nokia770_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 80d8620..e2a72af 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -584,6 +584,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = osk_map_io,
+ .reserve = omap_reserve,
.init_irq = osk_init_irq,
.init_machine = osk_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 569b4c9..61a2321 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -373,6 +373,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_palmte_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 6ad49a2..21c01c6 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,6 +321,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_palmtt_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 6641de9..f324924 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -338,10 +338,12 @@
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
- .phys_io = 0xfff00000,
- .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
- .boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
- .init_irq = omap_palmz71_init_irq,
- .init_machine = omap_palmz71_init,
- .timer = &omap_timer,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_palmz71_map_io,
+ .reserve = omap_reserve,
+ .init_irq = omap_palmz71_init_irq,
+ .init_machine = omap_palmz71_init,
+ .timer = &omap_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d57..8b5ab1f 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -339,6 +339,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_perseus2_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2fb1e5f..995566b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -423,7 +423,8 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_sx1_map_io,
- .init_irq = omap_sx1_init_irq,
+ .reserve = omap_reserve,
+ .init_irq = omap_sx1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 87b9436..4c483dc 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -287,6 +287,7 @@
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = voiceblue_map_io,
+ .reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
.init_machine = voiceblue_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d9b8d82..0ce3fec 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,7 +22,6 @@
extern void omap_check_revision(void);
extern void omap_sram_init(void);
-extern void omapfb_reserve_sdram(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -122,7 +121,6 @@
#endif
omap_sram_init();
- omapfb_reserve_sdram();
}
/*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a11a575..42f49f7 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -248,6 +248,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_2430sdp_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_2430sdp_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index f474a80..dd9c031 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -815,6 +815,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_3430sdp_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_3430sdp_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 504d2bd..57290fb 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -108,6 +108,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_sdp_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_sdp_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e4a5d66..4bb2c5d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -402,6 +402,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_4430sdp_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_4430sdp_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index af383a8..7da92de 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -472,6 +472,7 @@
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = am3517_evm_map_io,
+ .reserve = omap_reserve,
.init_irq = am3517_evm_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index aa69fb9..bd75642 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -346,6 +346,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_apollon_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_apollon_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2c..bc4c3f8 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -837,6 +837,7 @@
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = cm_t35_map_io,
+ .reserve = omap_reserve,
.init_irq = cm_t35_init_irq,
.init_machine = cm_t35_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b5..922b746 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -825,6 +825,7 @@
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = devkit8000_map_io,
+ .reserve = omap_reserve,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 16cc068..9242902 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -59,6 +59,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_generic_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0665f2c..16703fd 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -378,6 +378,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_h4_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d55c57b..759e39d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -543,6 +543,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = igep2_map_io,
+ .reserve = omap_reserve,
.init_irq = igep2_init_irq,
.init_machine = igep2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index fefd7e6..9cd2669 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -417,6 +417,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_ldp_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_ldp_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3ccc34e..2565ff0 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -667,6 +667,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
+ .reserve = omap_reserve,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
@@ -677,6 +678,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
+ .reserve = omap_reserve,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
@@ -687,6 +689,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
+ .reserve = omap_reserve,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 69b154c..0ab0c26 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -519,6 +519,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_beagle_map_io,
+ .reserve = omap_reserve,
.init_irq = omap3_beagle_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b952610..a3d2e28 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -727,6 +727,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_evm_map_io,
+ .reserve = omap_reserve,
.init_irq = omap3_evm_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index db06dc9..c0f4f12 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -601,6 +601,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3pandora_map_io,
+ .reserve = omap_reserve,
.init_irq = omap3pandora_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2f5f823..f05b867 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -571,6 +571,7 @@
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_touchbook_map_io,
+ .reserve = omap_reserve,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac414..87acb2f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -495,6 +495,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = overo_map_io,
+ .reserve = omap_reserve,
.init_irq = overo_init_irq,
.init_machine = overo_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321..0348392 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -175,6 +175,10 @@
#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
static int board_keymap[] = {
+ /*
+ * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+ * connected to the ground" matrix state.
+ */
KEY(0, 0, KEY_Q),
KEY(0, 1, KEY_O),
KEY(0, 2, KEY_P),
@@ -182,6 +186,7 @@
KEY(0, 4, KEY_BACKSPACE),
KEY(0, 6, KEY_A),
KEY(0, 7, KEY_S),
+
KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
KEY(1, 2, KEY_F),
@@ -190,6 +195,7 @@
KEY(1, 5, KEY_J),
KEY(1, 6, KEY_K),
KEY(1, 7, KEY_L),
+
KEY(2, 0, KEY_E),
KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
@@ -197,6 +203,8 @@
KEY(2, 5, KEY_Z),
KEY(2, 6, KEY_X),
KEY(2, 7, KEY_C),
+ KEY(2, 8, KEY_F9),
+
KEY(3, 0, KEY_R),
KEY(3, 1, KEY_V),
KEY(3, 2, KEY_B),
@@ -205,20 +213,23 @@
KEY(3, 5, KEY_SPACE),
KEY(3, 6, KEY_SPACE),
KEY(3, 7, KEY_LEFT),
+
KEY(4, 0, KEY_T),
KEY(4, 1, KEY_DOWN),
KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
KEY(4, 5, KEY_RIGHTALT),
KEY(4, 6, KEY_LEFTSHIFT),
+ KEY(4, 8, KEY_F10),
+
KEY(5, 0, KEY_Y),
+ KEY(5, 8, KEY_F11),
+
KEY(6, 0, KEY_U),
+
KEY(7, 0, KEY_I),
KEY(7, 1, KEY_F7),
KEY(7, 2, KEY_F8),
- KEY(0xff, 2, KEY_F9),
- KEY(0xff, 4, KEY_F10),
- KEY(0xff, 5, KEY_F11),
};
static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1b86b5b..3bd956f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -154,6 +154,7 @@
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = rx51_map_io,
+ .reserve = omap_reserve,
.init_irq = rx51_init_irq,
.init_machine = rx51_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 803ef14..ffe188c 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -95,6 +95,7 @@
.io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom2_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_zoom2_init_irq,
.init_machine = omap_zoom2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 3314704..5b605eb 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -77,6 +77,7 @@
.io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_zoom_map_io,
+ .reserve = omap_reserve,
.init_irq = omap_zoom_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 41b155a..d337441 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3166,6 +3166,10 @@
.recalc = &followparent_recalc,
};
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .ops = &clkops_null,
+};
/*
* clkdev
@@ -3173,6 +3177,7 @@
/* XXX At some point we should rename this file to clock3xxx_data.c */
static struct omap_clk omap3xxx_clks[] = {
+ CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX),
CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX),
CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX),
CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX),
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3cfb425..4e1f53d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
-#include <plat/vram.h>
#include "clock2xxx.h"
#include "clock3xxx.h"
@@ -241,8 +240,6 @@
omap2_check_revision();
omap_sram_init();
- omapfb_reserve_sdram();
- omap_vram_reserve_sdram();
}
#ifdef CONFIG_ARCH_OMAP2420
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 161fc2d..0f31305 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -35,7 +35,7 @@
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
-void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -46,7 +46,7 @@
/*
* Only adjust if > 64M on current system
*/
- if (node || (zone_size[0] <= sz))
+ if (zone_size[0] <= sz)
return;
zone_size[1] = zone_size[0] - sz;
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 45c23fd..40b6ac2 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -26,6 +26,7 @@
#include <mach/colibri.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
@@ -145,7 +146,7 @@
static inline void colibri_pxa300_init_lcd(void) {}
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
GPIO24_AC97_SYSCLK,
GPIO23_AC97_nACRESET,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3d1dcb9..461ba40 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -446,7 +446,7 @@
static struct pxamci_platform_data corgi_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = -1,
+ .gpio_card_detect = CORGI_GPIO_nSD_DETECT,
.gpio_card_ro = CORGI_GPIO_nSD_WP,
.gpio_power = CORGI_GPIO_SD_PWR,
};
@@ -715,7 +715,6 @@
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
if (machine_is_corgi())
mi->bank[0].size = (32*1024*1024);
else
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 9e4d981..268a9bc 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -256,13 +256,9 @@
static u32 mdrefr_dri(unsigned int freq)
{
- u32 dri = 0;
+ u32 interval = freq * SDRAM_TREF / sdram_rows;
- if (cpu_is_pxa25x())
- dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
- if (cpu_is_pxa27x())
- dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
- return dri;
+ return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
}
/* find a valid frequency point */
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 96ed130..a0ab308 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -34,7 +34,6 @@
{
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
if (machine_is_e800())
mi->bank[0].size = (128*1024*1024);
else
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 890fb90..c6305c5 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -26,8 +26,7 @@
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
- mi->bank[__nr].size = (__size), \
- mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+ mi->bank[__nr].size = (__size)
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index f626730..92361a6 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,24 +17,11 @@
*/
#define PHYS_OFFSET UL(0xa0000000)
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff
- * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff
- * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff
- * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS 26
-
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
- unsigned long *holes);
+void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
-#define arch_adjust_zones(node, size, holes) \
- cmx2xx_pci_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+ cmx2xx_pci_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5305a39..5e92d84 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -21,6 +21,7 @@
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/memblock.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
@@ -396,6 +397,11 @@
}
}
+static void __init palmt5_reserve(void)
+{
+ memblock_reserve(0xa0200000, 0x1000);
+}
+
static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
@@ -421,6 +427,7 @@
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmt5_init
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b4469..3d0c9cc 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/memblock.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
@@ -633,6 +634,12 @@
treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
}
+static void __init treo_reserve(void)
+{
+ memblock_reserve(0xa0000000, 0x1000);
+ memblock_reserve(0xa2000000, 0x1000);
+}
+
static void __init treo_init(void)
{
pxa_set_ffuart_info(NULL);
@@ -668,6 +675,7 @@
.io_pg_offst = io_p2v(0x40000000),
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
@@ -691,6 +699,7 @@
.io_pg_offst = io_p2v(0x40000000),
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
+ .reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f4abdaa..bc2758b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -463,7 +463,6 @@
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
mi->bank[0].size = (32*1024*1024);
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0af3617..c059dac 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -41,10 +41,10 @@
EXPORT_SYMBOL(pxa27x_clear_otgph);
static unsigned long ac97_reset_config[] = {
- GPIO95_AC97_nRESET,
- GPIO95_GPIO,
- GPIO113_AC97_nRESET,
GPIO113_GPIO,
+ GPIO113_AC97_nRESET,
+ GPIO95_GPIO,
+ GPIO95_AC97_nRESET,
};
void pxa27x_assert_ac97reset(int reset_gpio, int on)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c1048a3..51756c7 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -847,7 +847,6 @@
sharpsl_save_param();
mi->nr_banks = 1;
mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
mi->bank[0].size = (64*1024*1024);
}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7512b82..83cc3a1 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -948,7 +948,6 @@
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
- mi->bank[0].node = 0;
mi->bank[0].size = (64*1024*1024);
}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 595be19..a54fbda 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -61,12 +61,11 @@
/*
* Adjust the zones if there are restrictions for DMA access.
*/
-void __init realview_adjust_zones(int node, unsigned long *size,
- unsigned long *hole)
+void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
{
unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
- if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+ if (!machine_is_realview_pbx() || size[0] <= dma_size)
return;
size[ZONE_NORMAL] = size[0] - dma_size;
@@ -232,6 +231,21 @@
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
+ if (machine_is_realview_pb1176()) {
+ static bool inserted = false;
+
+ /*
+ * The PB1176 does not have the status register,
+ * assume it is inserted at startup, then invert
+ * for each call so card insertion/removal will
+ * be detected anyway. This will not be called if
+ * GPIO on PL061 is active, which is the proper
+ * way to do this on the PB1176.
+ */
+ inserted = !inserted;
+ return inserted ? 0 : 1;
+ }
+
if (adev->res.start == REALVIEW_MMCI0_BASE)
mask = 1;
else
@@ -300,8 +314,13 @@
.rate = 24000000,
};
+static struct clk dummy_apb_pclk;
+
static struct clk_lookup lookups[] = {
- { /* UART0 */
+ { /* Bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
.dev_id = "dev:uart0",
.clk = &ref24_clk,
}, { /* UART1 */
@@ -313,6 +332,12 @@
}, { /* UART3 */
.dev_id = "fpga:uart3",
.clk = &ref24_clk,
+ }, { /* UART3 is on the dev chip in PB1176 */
+ .dev_id = "dev:uart3",
+ .clk = &ref24_clk,
+ }, { /* UART4 only exists in PB1176 */
+ .dev_id = "fpga:uart4",
+ .clk = &ref24_clk,
}, { /* KMI0 */
.dev_id = "fpga:kmi0",
.clk = &ref24_clk,
@@ -322,12 +347,15 @@
}, { /* MMC0 */
.dev_id = "fpga:mmc0",
.clk = &ref24_clk,
- }, { /* EB:CLCD */
+ }, { /* CLCD is in the PB1176 and EB DevChip */
.dev_id = "dev:clcd",
.clk = &oscvco_clk,
}, { /* PB:CLCD */
.dev_id = "issp:clcd",
.clk = &oscvco_clk,
+ }, { /* SSP */
+ .dev_id = "dev:ssp0",
+ .clk = &ref24_clk,
}
};
@@ -342,7 +370,7 @@
return 0;
}
-arch_initcall(clk_init);
+core_initcall(clk_init);
/*
* CLCD support.
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 2f5ccb2..002ab5d 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -26,6 +26,7 @@
/*
* Peripheral addresses
*/
+#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */
#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 830055b..5c3c625 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
@@ -73,7 +74,6 @@
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
#define IRQ_PB1176_GPIO0 -1
-#define IRQ_PB1176_SSP -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2417bbc..5dafc15 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -30,10 +30,9 @@
#endif
#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(int node, unsigned long *size,
- unsigned long *hole);
-#define arch_adjust_zones(node, size, hole) \
- realview_adjust_zones(node, size, hole)
+extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
+#define arch_adjust_zones(size, hole) \
+ realview_adjust_zones(size, hole)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 4425018..991c1f8 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -25,6 +25,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -129,6 +130,12 @@
.irq_base = -1,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
/*
* RealView EB AMBA devices
*/
@@ -213,7 +220,7 @@
AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
@@ -324,6 +331,26 @@
.resource = pmu_resources,
};
+static struct resource char_lcd_resources[] = {
+ {
+ .start = REALVIEW_CHAR_LCD_BASE,
+ .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EB_CHARLCD,
+ .end = IRQ_EB_CHARLCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device char_lcd_device = {
+ .name = "arm-charlcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(char_lcd_resources),
+ .resource = char_lcd_resources,
+};
+
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -442,6 +469,7 @@
realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
+ platform_device_register(&char_lcd_device);
eth_device_register();
realview_usb_register(realview_eb_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 099a1f1..d2be12e 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -25,6 +25,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -123,6 +124,12 @@
.irq_base = -1,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
/*
* RealView PB1176 AMBA devices
*/
@@ -144,8 +151,6 @@
#define MPMC_DMA { 0, 0 }
#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
#define PB1176_CLCD_DMA { 0, 0 }
-#define DMAC_IRQ { IRQ_PB1176_DMAC, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
@@ -166,7 +171,9 @@
#define PB1176_UART2_DMA { 11, 10 }
#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
#define PB1176_UART3_DMA { 0x86, 0x87 }
-#define PB1176_SSP_IRQ { IRQ_PB1176_SSP, NO_IRQ }
+#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
+#define PB1176_UART4_DMA { 0, 0 }
+#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
#define PB1176_SSP_DMA { 9, 8 }
/* FPGA Primecells */
@@ -174,7 +181,7 @@
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL);
+AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
@@ -188,18 +195,16 @@
AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL);
-
-/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data);
-//AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL);
+AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
+AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
-// &dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
+ &uart4_device,
&smc_device,
&clcd_device,
&sctl_device,
@@ -276,6 +281,26 @@
.resource = &pmu_resource,
};
+static struct resource char_lcd_resources[] = {
+ {
+ .start = REALVIEW_CHAR_LCD_BASE,
+ .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PB1176_CHARLCD,
+ .end = IRQ_PB1176_CHARLCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device char_lcd_device = {
+ .name = "arm-charlcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(char_lcd_resources),
+ .resource = char_lcd_resources,
+};
+
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
@@ -338,6 +363,7 @@
platform_device_register(&realview_i2c_device);
realview_usb_register(realview_pb1176_isp1761_resources);
platform_device_register(&pmu_device);
+ platform_device_register(&char_lcd_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 0e07a5c..d591bc0 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -25,6 +25,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -124,6 +125,12 @@
.irq_base = -1,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
/*
* RealView PB11MPCore AMBA devices
*/
@@ -190,7 +197,7 @@
AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index ac2f06f..6c37621 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -25,6 +25,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -114,6 +115,12 @@
.irq_base = -1,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
/*
* RealView PBA8Core AMBA devices
*/
@@ -180,7 +187,7 @@
AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 08fd683..9428eff 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -24,6 +24,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -136,6 +137,12 @@
.irq_base = -1,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
/*
* RealView PBXCore AMBA devices
*/
@@ -202,7 +209,7 @@
AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 779b45b..3ba3bab 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/memblock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
@@ -304,6 +305,13 @@
s3c_pm_init();
}
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
@@ -346,6 +354,7 @@
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
+ .reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index ba93a35..054c9f9 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -119,7 +119,6 @@
mi->nr_banks=1;
mi->bank[0].start = 0x30000000;
mi->bank[0].size = SZ_64M;
- mi->bank[0].node = 0;
}
}
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 3ca9265..f291ac2 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -137,7 +137,6 @@
mi->nr_banks=1;
mi->bank[0].start = 0x30000000;
mi->bank[0].size = SZ_64M;
- mi->bank[0].node = 0;
}
}
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 8603b57..142d1f9 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/memblock.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
@@ -570,12 +571,20 @@
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
}
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
MACHINE_START(RX1950, "HP iPAQ RX1950")
/* Maintainers: Vasily Khoruzhick */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = rx1950_map_io,
+ .reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index d2946de..6bb44f7 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/memblock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/tty.h>
@@ -191,6 +192,13 @@
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
}
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+ memblock_reserve(0x30003000, 0x1000);
+ memblock_reserve(0x30081000, 0x1000);
+}
+
static void __init rx3715_init_irq(void)
{
s3c24xx_init_irq();
@@ -214,6 +222,7 @@
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = rx3715_map_io,
+ .reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index ec03f18..b7a9a60 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -13,8 +13,7 @@
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
- mi->bank[__nr].size = (__size), \
- mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+ mi->bank[__nr].size = (__size)
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index d5277f9..128a1df 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -17,10 +17,10 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
-#define arch_adjust_zones(node, size, holes) \
- sa1111_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+ sa1111_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M)
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 50f071c..5ea24d4 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -20,6 +20,9 @@
strb \rd, [\rx]
.endm
+ .macro waituart,rd,rx
+ .endm
+
.macro busyuart,rd,rx
mov \rd, #0
1001: add \rd, \rd, #1
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 3053e5b..d9c4812 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -19,9 +19,8 @@
#ifndef __ASSEMBLY__
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size)
+static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
{
- if (node != 0) return;
/* Only the first 4 MB (=1024 Pages) are usable for DMA */
/* See dev / -> .properties in OpenFirmware. */
zone_size[1] = zone_size[0] - 1024;
@@ -30,8 +29,8 @@
zhole_size[0] = 0;
}
-#define arch_adjust_zones(node, size, holes) \
- __arch_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+ __arch_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f2b88c5..4c704b4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -70,6 +70,18 @@
menu "Timer and clock configuration"
+config SHMOBILE_TIMER_HZ
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ default "128"
+ help
+ Allows the configuration of the timer frequency. It is customary
+ to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
+ case of low timer frequencies other values may be more suitable.
+ SH-Mobile systems using a 32768 Hz RCLK for clock events may want
+ to select a HZ value such as 128 that can evenly divide RCLK.
+ A HZ value that does not divide evenly may cause timer drift.
+
config SH_TIMER_CMT
bool "CMT timer driver"
default y
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 5179b72..132256b 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -2,7 +2,6 @@
#define __ASM_MACH_IRQS_H
#define NR_IRQS 512
-#define NR_IRQS_LEGACY 8
#define evt2irq(evt) (((evt) >> 5) - 16)
#define irq2evt(irq) (((irq) + 16) << 5)
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 39f6ccf..18febf9 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -341,8 +341,11 @@
.recalc = &follow_parent,
};
+static struct clk dummy_apb_pclk;
+
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 13e27c7..36ff056 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -428,8 +428,11 @@
.recalc = &follow_parent,
};
+static struct clk dummy_apb_pclk;
+
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5af71d5..5d12d54 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -1212,6 +1212,8 @@
};
#endif
+static struct clk dummy_apb_pclk;
+
#define DEF_LOOKUP(devid, clkref) \
{ \
.dev_id = devid, \
@@ -1223,6 +1225,10 @@
* look up through clockdevice.
*/
static struct clk_lookup lookups[] = {
+ {
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ },
/* Connected directly to the AMBA bus */
DEF_LOOKUP("amba", &amba_clk),
DEF_LOOKUP("cpu", &cpu_clk),
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index d2a0b88..bfcda98 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/memblock.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -22,6 +23,21 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+static void __init u300_reserve(void)
+{
+ /*
+ * U300 - This platform family can share physical memory
+ * between two ARM cpus, one running Linux and the other
+ * running another OS.
+ */
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
+ CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+ memblock_reserve(PHYS_OFFSET, 0x00100000);
+#endif
+#endif
+}
+
static void __init u300_init_machine(void)
{
u300_init_devices();
@@ -49,6 +65,7 @@
.io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
+ .reserve = u300_reserve,
.init_irq = u300_init_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b7..0e8fd13 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <plat/pincfg.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+ /* SSP0 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD,
+ GPIO146_SSP0_TXD,
+
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+};
+
static void ab4500_spi_cs_control(u32 command)
{
/* set the FRM signal, which is CS - TODO */
@@ -48,15 +71,20 @@
.cs_control = ab4500_spi_cs_control,
};
+static struct ab8500_platform_data ab8500_platdata = {
+ .irq_base = MOP500_AB8500_IRQ_BASE,
+};
+
static struct spi_board_info u8500_spi_devices[] = {
{
.modalias = "ab8500",
.controller_data = &ab4500_chip_info,
+ .platform_data = &ab8500_platdata,
.max_speed_hz = 12000000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
- .irq = IRQ_AB4500,
+ .irq = IRQ_DB8500_AB8500,
},
};
@@ -118,6 +146,10 @@
{
int i;
+ u8500_init_devices();
+
+ nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@
spi_register_board_info(u8500_spi_devices,
ARRAY_SIZE(u8500_spi_devices));
-
- u8500_init_devices();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 0a1318f..d8ab7f1 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -453,7 +453,11 @@
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
+static struct clk clk_dummy_apb_pclk;
+
static struct clk_lookup u8500_common_clks[] = {
+ CLK(dummy_apb_pclk, NULL, "apb_pclk"),
+
/* Peripheral Cluster #1 */
CLK(gpio0, "gpio.0", NULL),
CLK(gpio0, "gpio.1", NULL),
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 8229034..654fca9 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -65,7 +65,7 @@
.end = U8500_SSP0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_SSP0, NO_IRQ },
+ .irq = {IRQ_DB8500_SSP0, NO_IRQ },
/* ST-Ericsson modified id */
.periphid = SSP_PER_ID,
};
@@ -77,8 +77,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_I2C0,
- .end = IRQ_I2C0,
+ .start = IRQ_DB8500_I2C0,
+ .end = IRQ_DB8500_I2C0,
.flags = IORESOURCE_IRQ,
}
};
@@ -97,8 +97,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_I2C4,
- .end = IRQ_I2C4,
+ .start = IRQ_DB8500_I2C4,
+ .end = IRQ_DB8500_I2C4,
.flags = IORESOURCE_IRQ,
}
};
@@ -130,8 +130,8 @@
.name = "lcla",
},
[3] = {
- .start = IRQ_DMA,
- .end = IRQ_DMA,
+ .start = IRQ_DB8500_DMA,
+ .end = IRQ_DB8500_DMA,
.flags = IORESOURCE_IRQ}
};
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
new file mode 100644
index 0000000..cca4f70
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_MOP500_H
+#define __MACH_IRQS_BOARD_MOP500_H
+
+#define AB8500_NR_IRQS 104
+
+#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
+#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ + AB8500_NR_IRQS)
+#define MOP500_IRQ_END MOP500_AB8500_IRQ_END
+
+#if MOP500_IRQ_END > IRQ_BOARD_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END MOP500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
new file mode 100644
index 0000000..6fbfe5e
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB5500_H
+#define __MACH_IRQS_DB5500_H
+
+#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7)
+#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9)
+#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10)
+#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13)
+#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14)
+#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15)
+#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16)
+#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18)
+#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20)
+#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24)
+#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25)
+#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27)
+#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28)
+#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29)
+#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30)
+#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31)
+#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33)
+#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34)
+#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35)
+#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36)
+#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37)
+#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38)
+#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39)
+#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40)
+#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41)
+#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42)
+#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43)
+#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44)
+#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45)
+#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46)
+#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47)
+#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48)
+#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50)
+#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52)
+#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53)
+#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56)
+#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57)
+#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59)
+#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61)
+#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63)
+#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101)
+#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108)
+#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109)
+#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110)
+#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112)
+#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113)
+#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114)
+#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115)
+#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116)
+#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118)
+#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
new file mode 100644
index 0000000..8b5d9f0
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB8500_H
+#define __MACH_IRQS_DB8500_H
+
+#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7)
+#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9)
+#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10)
+#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13)
+#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14)
+#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15)
+#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16)
+#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18)
+#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20)
+#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24)
+#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25)
+#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27)
+#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28)
+#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29)
+#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31)
+#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
+#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
+#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
+#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
+#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36)
+#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37)
+#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38)
+#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39)
+#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40)
+#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41)
+#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42)
+#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43)
+#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44)
+#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45)
+#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46)
+#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47)
+#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48)
+#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49)
+#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50)
+#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51)
+#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52)
+#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53)
+#define IRQ_DB8500_KB (IRQ_SHPI_START + 54)
+#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56)
+#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57)
+#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59)
+#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61)
+#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62)
+#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63)
+#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97)
+#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99)
+#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100)
+#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104)
+#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105)
+#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106)
+#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107)
+#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108)
+#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109)
+#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110)
+#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112)
+#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113)
+#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114)
+#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115)
+#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116)
+#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118)
+#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126)
+#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 7970684..10385bd 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,7 +10,8 @@
#ifndef ASM_ARCH_IRQS_H
#define ASM_ARCH_IRQS_H
-#include <mach/hardware.h>
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
@@ -67,12 +68,21 @@
/* There are 128 shared peripheral interrupts assigned to
* INTID[160:32]. The first 32 interrupts are reserved.
*/
-#define U8500_SOC_NR_IRQS 161
+#define DBX500_NR_INTERNAL_IRQS 161
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 288
-#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS)
-#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS)
+#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-#endif /*ASM_ARCH_IRQS_H*/
+/* This will be overridden by board-specific irq headers */
+#define IRQ_BOARD_END IRQ_BOARD_START
+
+#ifdef CONFIG_MACH_U8500_MOP
+#include <mach/irqs-board-mop500.h>
+#endif
+
+#define NR_IRQS IRQ_BOARD_END
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
new file mode 100644
index 0000000..9055d5d
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -0,0 +1,742 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_PINS_DB8500_H
+#define __MACH_PINS_DB8500_H
+
+/*
+ * TODO: Eventually encode all non-board specific pull up/down configuration
+ * here.
+ */
+
+#define GPIO0_GPIO PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD PIN_CFG(2, ALT_A)
+#define GPIO2_NONE PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD PIN_CFG(3, ALT_A)
+#define GPIO3_NONE PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A)
+#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A)
+#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A)
+#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A)
+#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A)
+#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A)
+#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A)
+#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A)
+#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A)
+#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A)
+#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A)
+#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A)
+#define GPIO34_NONE PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A)
+#define GPIO35_NONE PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1 PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0 PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1 PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0 PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7 PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7 PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5 PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4 PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3 PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2 PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5 PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4 PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3 PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2 PIN_CFG(77, ALT_B)
+#define GPIO77_NONE PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6 PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6 PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5 PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4 PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO PIN_CFG(84, GPIO)
+#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5 PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4 PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7 PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7 PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6 PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6 PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A)
+#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A)
+#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A)
+#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A)
+#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A)
+#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A)
+#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A)
+#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A)
+#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A)
+#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A)
+#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A)
+#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8 PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9 PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8 PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7 PIN_CFG(153, ALT_A)
+#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6 PIN_CFG(154, ALT_A)
+#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5 PIN_CFG(155, ALT_A)
+#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4 PIN_CFG(156, ALT_A)
+#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7 PIN_CFG(157, ALT_A)
+#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6 PIN_CFG(158, ALT_A)
+#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5 PIN_CFG(159, ALT_A)
+#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4 PIN_CFG(160, ALT_A)
+#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
+#define GPIO160_NONE PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3 PIN_CFG(161, ALT_A)
+#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2 PIN_CFG(162, ALT_A)
+#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1 PIN_CFG(163, ALT_A)
+#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0 PIN_CFG(164, ALT_A)
+#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3 PIN_CFG(165, ALT_A)
+#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2 PIN_CFG(166, ALT_A)
+#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1 PIN_CFG(167, ALT_A)
+#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0 PIN_CFG(168, ALT_A)
+#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
+#define GPIO168_NONE PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A)
+
+#define GPIO198_GPIO PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A)
+
+#define GPIO200_GPIO PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A)
+
+#define GPIO201_GPIO PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A)
+
+#define GPIO202_GPIO PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A)
+#define GPIO202_PWL PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A)
+
+#define GPIO204_GPIO PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A)
+
+#define GPIO205_GPIO PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A)
+
+#define GPIO206_GPIO PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A)
+
+#define GPIO207_GPIO PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A)
+
+#define GPIO208_GPIO PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A)
+#define GPIO226_PWL PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
+#define GPIO229_PWL PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
+#define GPIO230_PWL PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A)
+#define GPIO258_NONE PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3dff864..e38acb0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,6 +28,7 @@
#include <linux/amba/clcd.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
#include <linux/io.h>
#include <linux/gfp.h>
@@ -354,6 +355,21 @@
.gpio_cd = -1,
};
+static struct resource char_lcd_resources[] = {
+ {
+ .start = VERSATILE_CHAR_LCD_BASE,
+ .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device char_lcd_device = {
+ .name = "arm-charlcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(char_lcd_resources),
+ .resource = char_lcd_resources,
+};
+
/*
* Clock handling
*/
@@ -400,8 +416,13 @@
.rate = 24000000,
};
+static struct clk dummy_apb_pclk;
+
static struct clk_lookup lookups[] = {
- { /* UART0 */
+ { /* AMBA bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
.dev_id = "dev:f1",
.clk = &ref24_clk,
}, { /* UART1 */
@@ -425,6 +446,9 @@
}, { /* MMC1 */
.dev_id = "fpga:0b",
.clk = &ref24_clk,
+ }, { /* SSP */
+ .dev_id = "dev:f4",
+ .clk = &ref24_clk,
}, { /* CLCD */
.dev_id = "dev:20",
.clk = &osc4_clk,
@@ -703,6 +727,12 @@
.irq_base = IRQ_GPIO1_START,
};
+static struct pl022_ssp_controller ssp0_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .num_chipselect = 1,
+};
+
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -772,7 +802,7 @@
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
@@ -843,6 +873,7 @@
platform_device_register(&versatile_flash_device);
platform_device_register(&versatile_i2c_device);
platform_device_register(&smc91x_device);
+ platform_device_register(&char_lcd_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 334f0df..13c7e5f 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -304,7 +304,7 @@
}
-struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6353459..577df6c 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -16,6 +16,7 @@
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
+#include <asm/smp_twd.h>
#include <mach/clkdev.h>
#include <mach/ct-ca9x4.h>
@@ -53,6 +54,7 @@
static void __init ct_ca9x4_map_io(void)
{
+ twd_base = MMIO_P2V(A9_MPCORE_TWD);
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index 8650f04..f9e2f8d 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -28,6 +28,7 @@
#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_TWD (CT_CA9X4_MPIC + 0x0600)
#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000)
/*
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d250711..d6db345 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -298,8 +298,13 @@
.rate = 24000000,
};
+static struct clk dummy_apb_pclk;
+
static struct clk_lookup v2m_lookups[] = {
- { /* UART0 */
+ { /* AMBA bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* UART0 */
.dev_id = "mb:uart0",
.clk = &osc2_clk,
}, { /* UART1 */
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 642207e..83c5632 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -93,7 +93,7 @@
DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
DEF_CLKLOOK(&clk_ext, NULL, "ext"),
DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index b2eda4d..7a1fa6a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -36,6 +36,8 @@
#include <mach/nuc900_spi.h>
#include <mach/map.h>
#include <mach/fb.h>
+#include <mach/regs-ldm.h>
+#include <mach/w90p910_keypad.h>
#include "cpu.h"
@@ -207,7 +209,7 @@
.divider = 24,
.sleep = 0,
.txnum = 0,
- .txbitlen = 1,
+ .txbitlen = 8,
.bus_num = 0,
};
@@ -256,7 +258,7 @@
.modalias = "m25p80",
.max_speed_hz = 20000000,
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 0,
.platform_data = &nuc900_spi_flash_data,
.mode = SPI_MODE_0,
},
@@ -361,6 +363,39 @@
/* KPI controller*/
+static int nuc900_keymap[] = {
+ KEY(0, 0, KEY_A),
+ KEY(0, 1, KEY_B),
+ KEY(0, 2, KEY_C),
+ KEY(0, 3, KEY_D),
+
+ KEY(1, 0, KEY_E),
+ KEY(1, 1, KEY_F),
+ KEY(1, 2, KEY_G),
+ KEY(1, 3, KEY_H),
+
+ KEY(2, 0, KEY_I),
+ KEY(2, 1, KEY_J),
+ KEY(2, 2, KEY_K),
+ KEY(2, 3, KEY_L),
+
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P),
+};
+
+static struct matrix_keymap_data nuc900_map_data = {
+ .keymap = nuc900_keymap,
+ .keymap_size = ARRAY_SIZE(nuc900_keymap),
+};
+
+struct w90p910_keypad_platform_data nuc900_keypad_info = {
+ .keymap_data = &nuc900_map_data,
+ .prescale = 0xfa,
+ .debounce = 0x50,
+};
+
static struct resource nuc900_kpi_resource[] = {
[0] = {
.start = W90X900_PA_KPI,
@@ -380,9 +415,49 @@
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_kpi_resource),
.resource = nuc900_kpi_resource,
+ .dev = {
+ .platform_data = &nuc900_keypad_info,
+ }
};
-#ifdef CONFIG_FB_NUC900
+/* LCD controller*/
+
+static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+ /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+ [0] = {
+ .type = LCM_DCCS_VA_SRC_RGB565,
+ .width = 320,
+ .height = 240,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .pixclock = 200000,
+ .left_margin = 34,
+ .right_margin = 54,
+ .hsync_len = 10,
+ .upper_margin = 18,
+ .lower_margin = 4,
+ .vsync_len = 1,
+ .dccs = 0x8e00041a,
+ .devctl = 0x060800c0,
+ .fbctrl = 0x00a000a0,
+ .scale = 0x04000400,
+ },
+};
+
+static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+ .displays = &nuc900_lcd_info[0],
+#else
+ .displays = nuc900_lcd_info,
+#endif
+ .num_displays = ARRAY_SIZE(nuc900_lcd_info),
+ .default_display = 0,
+ .gpio_dir = 0x00000004,
+ .gpio_dir_mask = 0xFFFFFFFD,
+ .gpio_data = 0x00000004,
+ .gpio_data_mask = 0xFFFFFFFD,
+};
static struct resource nuc900_lcd_resource[] = {
[0] = {
@@ -406,23 +481,10 @@
.dev = {
.dma_mask = &nuc900_device_lcd_dmamask,
.coherent_dma_mask = -1,
+ .platform_data = &nuc900_fb_info,
}
};
-void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
-{
- struct nuc900fb_mach_info *npd;
-
- npd = kmalloc(sizeof(*npd), GFP_KERNEL);
- if (npd) {
- memcpy(npd, pd, sizeof(*npd));
- nuc900_device_lcd.dev.platform_data = npd;
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-#endif
-
/* AUDIO controller*/
static u64 nuc900_device_audio_dmamask = -1;
static struct resource nuc900_ac97_resource[] = {
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
new file mode 100644
index 0000000..6087abd
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-gcr.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_GCR_H
+#define __ASM_ARCH_REGS_GCR_H
+
+/* Global control registers */
+
+#define GCR_BA W90X900_VA_GCR
+#define REG_PDID (GCR_BA+0x000)
+#define REG_PWRON (GCR_BA+0x004)
+#define REG_ARBCON (GCR_BA+0x008)
+#define REG_MFSEL (GCR_BA+0x00C)
+#define REG_EBIDPE (GCR_BA+0x010)
+#define REG_LCDDPE (GCR_BA+0x014)
+#define REG_GPIOCPE (GCR_BA+0x018)
+#define REG_GPIODPE (GCR_BA+0x01C)
+#define REG_GPIOEPE (GCR_BA+0x020)
+#define REG_GPIOFPE (GCR_BA+0x024)
+#define REG_GPIOGPE (GCR_BA+0x028)
+#define REG_GPIOHPE (GCR_BA+0x02C)
+#define REG_GPIOIPE (GCR_BA+0x030)
+#define REG_GTMP1 (GCR_BA+0x034)
+#define REG_GTMP2 (GCR_BA+0x038)
+#define REG_GTMP3 (GCR_BA+0x03C)
+
+#endif /* __ASM_ARCH_REGS_GCR_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index b3edc3c..04d295f 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,51 +20,10 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/map.h>
-#include <mach/regs-ldm.h>
#include <mach/fb.h>
#include "nuc950.h"
-#ifdef CONFIG_FB_NUC900
-/* LCD Controller */
-static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
- /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
- [0] = {
- .type = LCM_DCCS_VA_SRC_RGB565,
- .width = 320,
- .height = 240,
- .xres = 320,
- .yres = 240,
- .bpp = 16,
- .pixclock = 200000,
- .left_margin = 34,
- .right_margin = 54,
- .hsync_len = 10,
- .upper_margin = 18,
- .lower_margin = 4,
- .vsync_len = 1,
- .dccs = 0x8e00041a,
- .devctl = 0x060800c0,
- .fbctrl = 0x00a000a0,
- .scale = 0x04000400,
- },
-};
-
-static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
-#if defined(CONFIG_GPM1040A0_320X240)
- .displays = &nuc950_lcd_info[0],
-#else
- .displays = nuc950_lcd_info,
-#endif
- .num_displays = ARRAY_SIZE(nuc950_lcd_info),
- .default_display = 0,
- .gpio_dir = 0x00000004,
- .gpio_dir_mask = 0xFFFFFFFD,
- .gpio_data = 0x00000004,
- .gpio_data_mask = 0xFFFFFFFD,
-};
-#endif
-
static void __init nuc950evb_map_io(void)
{
nuc950_map_io();
@@ -74,9 +33,6 @@
static void __init nuc950evb_init(void)
{
nuc950_board_init();
-#ifdef CONFIG_FB_NUC900
- nuc900_fb_set_platdata(&nuc950_fb_info);
-#endif
}
MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
index 656f03b..1523f41 100644
--- a/arch/arm/mach-w90x900/nuc910.c
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -26,6 +26,8 @@
static struct platform_device *nuc910_dev[] __initdata = {
&nuc900_device_ts,
&nuc900_device_rtc,
+ &nuc900_device_lcd,
+ &nuc900_device_kpi,
};
/* define specific CPU platform io map */
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 4d1f1ab..5704f74 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -26,9 +26,7 @@
static struct platform_device *nuc950_dev[] __initdata = {
&nuc900_device_kpi,
&nuc900_device_fmi,
-#ifdef CONFIG_FB_NUC900
&nuc900_device_lcd,
-#endif
};
/* define specific CPU platform io map */
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index e8d34a80..d63b6c4 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -15,7 +15,6 @@
obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
-obj-$(CONFIG_DISCONTIGMEM) += discontig.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
deleted file mode 100644
index c8c0c4b..0000000
--- a/arch/arm/mm/discontig.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mm/discontig.c
- *
- * Discontiguous memory support.
- *
- * Initial code: Copyright (C) 1999-2000 Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mmzone.h>
-#include <linux/bootmem.h>
-
-#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
-# error Fix Me Please
-#endif
-
-/*
- * Our node_data structure for discontiguous memory.
- */
-
-pg_data_t discontig_node_data[MAX_NUMNODES] = {
- { .bdata = &bootmem_node_data[0] },
- { .bdata = &bootmem_node_data[1] },
- { .bdata = &bootmem_node_data[2] },
- { .bdata = &bootmem_node_data[3] },
-#if MAX_NUMNODES == 16
- { .bdata = &bootmem_node_data[4] },
- { .bdata = &bootmem_node_data[5] },
- { .bdata = &bootmem_node_data[6] },
- { .bdata = &bootmem_node_data[7] },
- { .bdata = &bootmem_node_data[8] },
- { .bdata = &bootmem_node_data[9] },
- { .bdata = &bootmem_node_data[10] },
- { .bdata = &bootmem_node_data[11] },
- { .bdata = &bootmem_node_data[12] },
- { .bdata = &bootmem_node_data[13] },
- { .bdata = &bootmem_node_data[14] },
- { .bdata = &bootmem_node_data[15] },
-#endif
-};
-
-EXPORT_SYMBOL(discontig_node_data);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e00404e..240b68d 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
#include <linux/initrd.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
@@ -79,38 +80,37 @@
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
- int shared = 0, cached = 0, slab = 0, node, i;
+ int shared = 0, cached = 0, slab = 0, i;
struct meminfo * mi = &meminfo;
printk("Mem-info:\n");
show_free_areas();
- for_each_online_node(node) {
- for_each_nodebank (i,mi,node) {
- struct membank *bank = &mi->bank[i];
- unsigned int pfn1, pfn2;
- struct page *page, *end;
- pfn1 = bank_pfn_start(bank);
- pfn2 = bank_pfn_end(bank);
+ for_each_bank (i, mi) {
+ struct membank *bank = &mi->bank[i];
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
- page = pfn_to_page(pfn1);
- end = pfn_to_page(pfn2 - 1) + 1;
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
- do {
- total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (PageSlab(page))
- slab++;
- else if (!page_count(page))
- free++;
- else
- shared += page_count(page) - 1;
- page++;
- } while (page < end);
- }
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
}
printk("%d pages of RAM\n", total);
@@ -121,7 +121,7 @@
printk("%d pages swap cached\n", cached);
}
-static void __init find_node_limits(int node, struct meminfo *mi,
+static void __init find_limits(struct meminfo *mi,
unsigned long *min, unsigned long *max_low, unsigned long *max_high)
{
int i;
@@ -129,7 +129,7 @@
*min = -1UL;
*max_low = *max_high = 0;
- for_each_nodebank(i, mi, node) {
+ for_each_bank (i, mi) {
struct membank *bank = &mi->bank[i];
unsigned long start, end;
@@ -147,155 +147,64 @@
}
}
-/*
- * FIXME: We really want to avoid allocating the bootmap bitmap
- * over the top of the initrd. Hopefully, this is located towards
- * the start of a bank, so if we allocate the bootmap bitmap at
- * the end, we won't clash.
- */
-static unsigned int __init
-find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
-{
- unsigned int start_pfn, i, bootmap_pfn;
-
- start_pfn = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
- bootmap_pfn = 0;
-
- for_each_nodebank(i, mi, node) {
- struct membank *bank = &mi->bank[i];
- unsigned int start, end;
-
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (end < start_pfn)
- continue;
-
- if (start < start_pfn)
- start = start_pfn;
-
- if (end <= start)
- continue;
-
- if (end - start >= bootmap_pages) {
- bootmap_pfn = start;
- break;
- }
- }
-
- if (bootmap_pfn == 0)
- BUG();
-
- return bootmap_pfn;
-}
-
-static int __init check_initrd(struct meminfo *mi)
-{
- int initrd_node = -2;
-#ifdef CONFIG_BLK_DEV_INITRD
- unsigned long end = phys_initrd_start + phys_initrd_size;
-
- /*
- * Make sure that the initrd is within a valid area of
- * memory.
- */
- if (phys_initrd_size) {
- unsigned int i;
-
- initrd_node = -1;
-
- for (i = 0; i < mi->nr_banks; i++) {
- struct membank *bank = &mi->bank[i];
- if (bank_phys_start(bank) <= phys_initrd_start &&
- end <= bank_phys_end(bank))
- initrd_node = bank->node;
- }
- }
-
- if (initrd_node == -1) {
- printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
- "physical memory - disabling initrd\n",
- phys_initrd_start, phys_initrd_size);
- phys_initrd_start = phys_initrd_size = 0;
- }
-#endif
-
- return initrd_node;
-}
-
-static void __init bootmem_init_node(int node, struct meminfo *mi,
+static void __init arm_bootmem_init(struct meminfo *mi,
unsigned long start_pfn, unsigned long end_pfn)
{
- unsigned long boot_pfn;
unsigned int boot_pages;
+ phys_addr_t bitmap;
pg_data_t *pgdat;
int i;
/*
- * Allocate the bootmem bitmap page.
+ * Allocate the bootmem bitmap page. This must be in a region
+ * of memory which has already been mapped.
*/
boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
- boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+ bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+ __pfn_to_phys(end_pfn));
/*
- * Initialise the bootmem allocator for this node, handing the
+ * Initialise the bootmem allocator, handing the
* memory banks over to bootmem.
*/
- node_set_online(node);
- pgdat = NODE_DATA(node);
- init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+ node_set_online(0);
+ pgdat = NODE_DATA(0);
+ init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
- for_each_nodebank(i, mi, node) {
+ for_each_bank(i, mi) {
struct membank *bank = &mi->bank[i];
if (!bank->highmem)
- free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+ free_bootmem(bank_phys_start(bank), bank_phys_size(bank));
}
/*
- * Reserve the bootmem bitmap for this node.
+ * Reserve the memblock reserved regions in bootmem.
*/
- reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
- boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-}
-
-static void __init bootmem_reserve_initrd(int node)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- pg_data_t *pgdat = NODE_DATA(node);
- int res;
-
- res = reserve_bootmem_node(pgdat, phys_initrd_start,
- phys_initrd_size, BOOTMEM_EXCLUSIVE);
-
- if (res == 0) {
- initrd_start = __phys_to_virt(phys_initrd_start);
- initrd_end = initrd_start + phys_initrd_size;
- } else {
- printk(KERN_ERR
- "INITRD: 0x%08lx+0x%08lx overlaps in-use "
- "memory region - disabling initrd\n",
- phys_initrd_start, phys_initrd_size);
+ for (i = 0; i < memblock.reserved.cnt; i++) {
+ phys_addr_t start = memblock_start_pfn(&memblock.reserved, i);
+ if (start >= start_pfn &&
+ memblock_end_pfn(&memblock.reserved, i) <= end_pfn)
+ reserve_bootmem_node(pgdat, __pfn_to_phys(start),
+ memblock_size_bytes(&memblock.reserved, i),
+ BOOTMEM_DEFAULT);
}
-#endif
}
-static void __init bootmem_free_node(int node, struct meminfo *mi)
+static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
+ unsigned long max_low, unsigned long max_high)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- unsigned long min, max_low, max_high;
int i;
- find_node_limits(node, mi, &min, &max_low, &max_high);
-
/*
- * initialise the zones within this node.
+ * initialise the zones.
*/
memset(zone_size, 0, sizeof(zone_size));
/*
- * The size of this node has already been determined. If we need
- * to do anything fancy with the allocation of this memory to the
- * zones, now is the time to do it.
+ * The memory size has already been determined. If we need
+ * to do anything fancy with the allocation of this memory
+ * to the zones, now is the time to do it.
*/
zone_size[0] = max_low - min;
#ifdef CONFIG_HIGHMEM
@@ -303,11 +212,11 @@
#endif
/*
- * For each bank in this node, calculate the size of the holes.
- * holes = node_size - sum(bank_sizes_in_node)
+ * Calculate the size of the holes.
+ * holes = node_size - sum(bank_sizes)
*/
memcpy(zhole_size, zone_size, sizeof(zhole_size));
- for_each_nodebank(i, mi, node) {
+ for_each_bank(i, mi) {
int idx = 0;
#ifdef CONFIG_HIGHMEM
if (mi->bank[i].highmem)
@@ -320,24 +229,23 @@
* Adjust the sizes according to any special requirements for
* this machine type.
*/
- arch_adjust_zones(node, zone_size, zhole_size);
+ arch_adjust_zones(zone_size, zhole_size);
- free_area_init_node(node, zone_size, min, zhole_size);
+ free_area_init_node(0, zone_size, min, zhole_size);
}
#ifndef CONFIG_SPARSEMEM
int pfn_valid(unsigned long pfn)
{
- struct meminfo *mi = &meminfo;
- unsigned int left = 0, right = mi->nr_banks;
+ struct memblock_region *mem = &memblock.memory;
+ unsigned int left = 0, right = mem->cnt;
do {
unsigned int mid = (right + left) / 2;
- struct membank *bank = &mi->bank[mid];
- if (pfn < bank_pfn_start(bank))
+ if (pfn < memblock_start_pfn(mem, mid))
right = mid;
- else if (pfn >= bank_pfn_end(bank))
+ else if (pfn >= memblock_end_pfn(mem, mid))
left = mid + 1;
else
return 1;
@@ -346,73 +254,69 @@
}
EXPORT_SYMBOL(pfn_valid);
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
{
}
#else
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
{
int i;
- for_each_nodebank(i, mi, node) {
- struct membank *bank = &mi->bank[i];
- memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
- }
+ for (i = 0; i < memblock.memory.cnt; i++)
+ memory_present(0, memblock_start_pfn(&memblock.memory, i),
+ memblock_end_pfn(&memblock.memory, i));
}
#endif
+void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+ int i;
+
+ memblock_init();
+ for (i = 0; i < mi->nr_banks; i++)
+ memblock_add(mi->bank[i].start, mi->bank[i].size);
+
+ /* Register the kernel text, kernel data and initrd with memblock. */
+#ifdef CONFIG_XIP_KERNEL
+ memblock_reserve(__pa(_data), _end - _data);
+#else
+ memblock_reserve(__pa(_stext), _end - _stext);
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (phys_initrd_size) {
+ memblock_reserve(phys_initrd_start, phys_initrd_size);
+
+ /* Now convert initrd to virtual addresses */
+ initrd_start = __phys_to_virt(phys_initrd_start);
+ initrd_end = initrd_start + phys_initrd_size;
+ }
+#endif
+
+ arm_mm_memblock_reserve();
+
+ /* reserve any platform specific memblock areas */
+ if (mdesc->reserve)
+ mdesc->reserve();
+
+ memblock_analyze();
+ memblock_dump_all();
+}
+
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
unsigned long min, max_low, max_high;
- int node, initrd_node;
-
- /*
- * Locate which node contains the ramdisk image, if any.
- */
- initrd_node = check_initrd(mi);
max_low = max_high = 0;
+ find_limits(mi, &min, &max_low, &max_high);
+
+ arm_bootmem_init(mi, min, max_low);
+
/*
- * Run through each node initialising the bootmem allocator.
+ * Sparsemem tries to allocate bootmem in memory_present(),
+ * so must be done after the fixed reservations
*/
- for_each_node(node) {
- unsigned long node_low, node_high;
-
- find_node_limits(node, mi, &min, &node_low, &node_high);
-
- if (node_low > max_low)
- max_low = node_low;
- if (node_high > max_high)
- max_high = node_high;
-
- /*
- * If there is no memory in this node, ignore it.
- * (We can't have nodes which have no lowmem)
- */
- if (node_low == 0)
- continue;
-
- bootmem_init_node(node, mi, min, node_low);
-
- /*
- * Reserve any special node zero regions.
- */
- if (node == 0)
- reserve_node_zero(NODE_DATA(node));
-
- /*
- * If the initrd is in this node, reserve its memory.
- */
- if (node == initrd_node)
- bootmem_reserve_initrd(node);
-
- /*
- * Sparsemem tries to allocate bootmem in memory_present(),
- * so must be done after the fixed reservations
- */
- arm_memory_present(mi, node);
- }
+ arm_memory_present();
/*
* sparse_init() needs the bootmem allocator up and running.
@@ -420,12 +324,11 @@
sparse_init();
/*
- * Now free memory in each node - free_area_init_node needs
+ * Now free the memory - free_area_init_node needs
* the sparse mem_map arrays initialized by sparse_init()
* for memmap_init_zone(), otherwise all PFNs are invalid.
*/
- for_each_node(node)
- bootmem_free_node(node, mi);
+ arm_bootmem_free(mi, min, max_low, max_high);
high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
@@ -460,7 +363,7 @@
}
static inline void
-free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
{
struct page *start_pg, *end_pg;
unsigned long pg, pgend;
@@ -483,13 +386,13 @@
* free the section of the memmap array.
*/
if (pg < pgend)
- free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+ free_bootmem(pg, pgend - pg);
}
/*
* The mem_map array can get very big. Free the unused area of the memory map.
*/
-static void __init free_unused_memmap_node(int node, struct meminfo *mi)
+static void __init free_unused_memmap(struct meminfo *mi)
{
unsigned long bank_start, prev_bank_end = 0;
unsigned int i;
@@ -499,7 +402,7 @@
* may not be the case, especially if the user has provided the
* information on the command line.
*/
- for_each_nodebank(i, mi, node) {
+ for_each_bank(i, mi) {
struct membank *bank = &mi->bank[i];
bank_start = bank_pfn_start(bank);
@@ -514,7 +417,7 @@
* between the current bank and the previous, free it.
*/
if (prev_bank_end && prev_bank_end != bank_start)
- free_memmap(node, prev_bank_end, bank_start);
+ free_memmap(prev_bank_end, bank_start);
prev_bank_end = bank_pfn_end(bank);
}
@@ -528,26 +431,19 @@
void __init mem_init(void)
{
unsigned long reserved_pages, free_pages;
- int i, node;
+ int i;
#ifdef CONFIG_HAVE_TCM
/* These pointers are filled in on TCM detection */
extern u32 dtcm_end;
extern u32 itcm_end;
#endif
-#ifndef CONFIG_DISCONTIGMEM
max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-#endif
/* this will put all unused low memory onto the freelists */
- for_each_online_node(node) {
- pg_data_t *pgdat = NODE_DATA(node);
+ free_unused_memmap(&meminfo);
- free_unused_memmap_node(node, &meminfo);
-
- if (pgdat->node_spanned_pages != 0)
- totalram_pages += free_all_bootmem_node(pgdat);
- }
+ totalram_pages += free_all_bootmem();
#ifdef CONFIG_SA1111
/* now that our DMA memory is actually so designated, we can free it */
@@ -557,39 +453,35 @@
#ifdef CONFIG_HIGHMEM
/* set highmem page free */
- for_each_online_node(node) {
- for_each_nodebank (i, &meminfo, node) {
- unsigned long start = bank_pfn_start(&meminfo.bank[i]);
- unsigned long end = bank_pfn_end(&meminfo.bank[i]);
- if (start >= max_low_pfn + PHYS_PFN_OFFSET)
- totalhigh_pages += free_area(start, end, NULL);
- }
+ for_each_bank (i, &meminfo) {
+ unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+ unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+ if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+ totalhigh_pages += free_area(start, end, NULL);
}
totalram_pages += totalhigh_pages;
#endif
reserved_pages = free_pages = 0;
- for_each_online_node(node) {
- for_each_nodebank(i, &meminfo, node) {
- struct membank *bank = &meminfo.bank[i];
- unsigned int pfn1, pfn2;
- struct page *page, *end;
+ for_each_bank(i, &meminfo) {
+ struct membank *bank = &meminfo.bank[i];
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
- pfn1 = bank_pfn_start(bank);
- pfn2 = bank_pfn_end(bank);
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
- page = pfn_to_page(pfn1);
- end = pfn_to_page(pfn2 - 1) + 1;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
- do {
- if (PageReserved(page))
- reserved_pages++;
- else if (!page_count(page))
- free_pages++;
- page++;
- } while (page < end);
- }
+ do {
+ if (PageReserved(page))
+ reserved_pages++;
+ else if (!page_count(page))
+ free_pages++;
+ page++;
+ } while (page < end);
}
/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 815d08e..6630620 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -28,7 +28,5 @@
#endif
-struct pglist_data;
-
void __init bootmem_init(void);
-void reserve_node_zero(struct pglist_data *pgdat);
+void arm_mm_memblock_reserve(void);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e534801..6e1c4f6 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -11,13 +11,12 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/bootmem.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
+#include <linux/memblock.h>
#include <linux/sort.h>
#include <asm/cputype.h>
-#include <asm/mach-types.h>
#include <asm/sections.h>
#include <asm/cachetype.h>
#include <asm/setup.h>
@@ -501,18 +500,28 @@
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
+static void __init *early_alloc(unsigned long sz)
+{
+ void *ptr = __va(memblock_alloc(sz, sz));
+ memset(ptr, 0, sz);
+ return ptr;
+}
+
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t));
+ __pmd_populate(pmd, __pa(pte) | prot);
+ }
+ BUG_ON(pmd_bad(*pmd));
+ return pte_offset_kernel(pmd, addr);
+}
+
static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
unsigned long end, unsigned long pfn,
const struct mem_type *type)
{
- pte_t *pte;
-
- if (pmd_none(*pmd)) {
- pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
- __pmd_populate(pmd, __pa(pte) | type->prot_l1);
- }
-
- pte = pte_offset_kernel(pmd, addr);
+ pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
do {
set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
pfn++;
@@ -681,7 +690,7 @@
create_mapping(io_desc + i);
}
-static unsigned long __initdata vmalloc_reserve = SZ_128M;
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
/*
* vmalloc=size forces the vmalloc area to be exactly 'size'
@@ -690,7 +699,7 @@
*/
static int __init early_vmalloc(char *arg)
{
- vmalloc_reserve = memparse(arg, NULL);
+ unsigned long vmalloc_reserve = memparse(arg, NULL);
if (vmalloc_reserve < SZ_16M) {
vmalloc_reserve = SZ_16M;
@@ -705,22 +714,26 @@
"vmalloc area is too big, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
+
+ vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
return 0;
}
early_param("vmalloc", early_vmalloc);
-#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
+phys_addr_t lowmem_end_addr;
static void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
+ lowmem_end_addr = __pa(vmalloc_min - 1) + 1;
+
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
#ifdef CONFIG_HIGHMEM
- if (__va(bank->start) > VMALLOC_MIN ||
+ if (__va(bank->start) > vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET)
highmem = 1;
@@ -730,8 +743,8 @@
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
*/
- if (__va(bank->start) < VMALLOC_MIN &&
- bank->size > VMALLOC_MIN - __va(bank->start)) {
+ if (__va(bank->start) < vmalloc_min &&
+ bank->size > vmalloc_min - __va(bank->start)) {
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
@@ -740,12 +753,12 @@
(meminfo.nr_banks - i) * sizeof(*bank));
meminfo.nr_banks++;
i++;
- bank[1].size -= VMALLOC_MIN - __va(bank->start);
- bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+ bank[1].size -= vmalloc_min - __va(bank->start);
+ bank[1].start = __pa(vmalloc_min - 1) + 1;
bank[1].highmem = highmem = 1;
j++;
}
- bank->size = VMALLOC_MIN - __va(bank->start);
+ bank->size = vmalloc_min - __va(bank->start);
}
#else
bank->highmem = highmem;
@@ -754,7 +767,7 @@
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
- if (__va(bank->start) >= VMALLOC_MIN ||
+ if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET) {
printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
"(vmalloc region overlap).\n",
@@ -766,9 +779,9 @@
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
- if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+ if (__va(bank->start + bank->size) > vmalloc_min ||
__va(bank->start + bank->size) < __va(bank->start)) {
- unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+ unsigned long newsize = vmalloc_min - __va(bank->start);
printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
"to -%.8lx (vmalloc region overlap).\n",
bank->start, bank->start + bank->size - 1,
@@ -840,101 +853,23 @@
}
/*
- * Reserve the various regions of node 0
+ * Reserve the special regions of memory
*/
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
{
- unsigned long res_size = 0;
-
- /*
- * Register the kernel text and data with bootmem.
- * Note that this can only be in node 0.
- */
-#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
- BOOTMEM_DEFAULT);
-#else
- reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
- BOOTMEM_DEFAULT);
-#endif
-
/*
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
- reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
- PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT);
-
- /*
- * Hmm... This should go elsewhere, but we really really need to
- * stop things allocating the low memory; ideally we need a better
- * implementation of GFP_DMA which does not assume that DMA-able
- * memory starts at zero.
- */
- if (machine_is_integrator() || machine_is_cintegrator())
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
- /*
- * These should likewise go elsewhere. They pre-reserve the
- * screen memory region at the start of main system memory.
- */
- if (machine_is_edb7211())
- res_size = 0x00020000;
- if (machine_is_p720t())
- res_size = 0x00014000;
-
- /* H1940, RX3715 and RX1950 need to reserve this for suspend */
-
- if (machine_is_h1940() || machine_is_rx3715()
- || machine_is_rx1950()) {
- reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
- BOOTMEM_DEFAULT);
- reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
- BOOTMEM_DEFAULT);
- }
-
- if (machine_is_palmld() || machine_is_palmtx()) {
- reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
- BOOTMEM_EXCLUSIVE);
- reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
- BOOTMEM_EXCLUSIVE);
- }
-
- if (machine_is_treo680() || machine_is_centro()) {
- reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
- BOOTMEM_EXCLUSIVE);
- reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
- BOOTMEM_EXCLUSIVE);
- }
-
- if (machine_is_palmt5())
- reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
- BOOTMEM_EXCLUSIVE);
-
- /*
- * U300 - This platform family can share physical memory
- * between two ARM cpus, one running Linux and the other
- * running another OS.
- */
- if (machine_is_u300()) {
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
- CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
- res_size = 0x00100000;
-#endif
-#endif
- }
+ memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
* precious DMA-able memory...
*/
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+ memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
#endif
- if (res_size)
- reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size,
- BOOTMEM_DEFAULT);
}
/*
@@ -953,7 +888,7 @@
/*
* Allocate the vector page early.
*/
- vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+ vectors = early_alloc(PAGE_SIZE);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
@@ -1024,11 +959,8 @@
static void __init kmap_init(void)
{
#ifdef CONFIG_HIGHMEM
- pmd_t *pmd = pmd_off_k(PKMAP_BASE);
- pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
- BUG_ON(!pmd_none(*pmd) || !pte);
- __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
- pkmap_page_table = pte + PTRS_PER_PTE;
+ pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
+ PKMAP_BASE, _PAGE_KERNEL_TABLE);
#endif
}
@@ -1079,17 +1011,16 @@
sanity_check_meminfo();
prepare_page_table();
map_lowmem();
- bootmem_init();
devicemaps_init(mdesc);
kmap_init();
top_pmd = pmd_off_k(0xffff0000);
- /*
- * allocate the zero page. Note that this always succeeds and
- * returns a zeroed result.
- */
- zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+ /* allocate the zero page. */
+ zero_page = early_alloc(PAGE_SIZE);
+
+ bootmem_init();
+
empty_zero_page = virt_to_page(zero_page);
__flush_dcache_page(NULL, empty_zero_page);
}
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 33b3273..687d023 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -6,8 +6,8 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
-#include <linux/bootmem.h>
#include <linux/io.h>
+#include <linux/memblock.h>
#include <asm/cacheflush.h>
#include <asm/sections.h>
@@ -17,30 +17,14 @@
#include "mm.h"
-/*
- * Reserve the various regions of node 0
- */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
{
/*
- * Register the kernel text and data with bootmem.
- * Note that this can only be in node 0.
- */
-#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
- BOOTMEM_DEFAULT);
-#else
- reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
- BOOTMEM_DEFAULT);
-#endif
-
- /*
* Register the exception vector page.
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
- reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE,
- BOOTMEM_DEFAULT);
+ memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
}
/*
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6c8a02a..85d3e55 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -29,6 +29,11 @@
#include <mach/time.h>
/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define IOP_MIN_RANGE 4
+
+/*
* IOP clocksource (free-running timer 1).
*/
static cycle_t iop_clocksource_read(struct clocksource *unused)
@@ -44,27 +49,6 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
-{
- u64 temp;
- u32 shift;
-
- /* Find shift and mult values for hz. */
- shift = 32;
- do {
- temp = (u64) NSEC_PER_SEC << shift;
- do_div(temp, hz);
- if ((temp >> 32) == 0)
- break;
- } while (--shift != 0);
-
- cs->shift = shift;
- cs->mult = (u32) temp;
-
- printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
- cs->name, cs->shift, cs->mult);
-}
-
/*
* IOP sched_clock() implementation via its clocksource.
*/
@@ -130,27 +114,6 @@
.set_mode = iop_set_mode,
};
-static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
-{
- u64 temp;
- u32 shift;
-
- /* Find shift and mult values for hz. */
- shift = 32;
- do {
- temp = (u64) hz << shift;
- do_div(temp, NSEC_PER_SEC);
- if ((temp >> 32) == 0)
- break;
- } while (--shift != 0);
-
- ce->shift = shift;
- ce->mult = (u32) temp;
-
- printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
- ce->name, ce->shift, ce->mult);
-}
-
static irqreturn_t
iop_timer_interrupt(int irq, void *dev_id)
{
@@ -190,7 +153,8 @@
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
- iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+ clockevents_calc_mult_shift(&iop_clockevent,
+ tick_rate, IOP_MIN_RANGE);
iop_clockevent.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &iop_clockevent);
iop_clockevent.min_delta_ns =
@@ -207,6 +171,7 @@
write_trr1(0xffffffff);
write_tcr1(0xffffffff);
write_tmr1(timer_ctl);
- iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+ clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
+ IOP_MIN_RANGE);
clocksource_register(&iop_clocksource);
}
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 5a6ef25..977c8f9 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -23,6 +23,7 @@
#include <linux/irq.h>
#include <linux/slab.h>
+#include <plat/pincfg.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -46,20 +47,12 @@
u32 edge_falling;
};
-/* Mode functions */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
+static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
+ unsigned offset, int gpio_mode)
{
- struct nmk_gpio_chip *nmk_chip;
- unsigned long flags;
- u32 afunc, bfunc, bit;
+ u32 bit = 1 << offset;
+ u32 afunc, bfunc;
- nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
- if (!nmk_chip)
- return -EINVAL;
-
- bit = 1 << (gpio - nmk_chip->chip.base);
-
- spin_lock_irqsave(&nmk_chip->lock, flags);
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
if (gpio_mode & NMK_GPIO_ALT_A)
@@ -68,6 +61,203 @@
bfunc |= bit;
writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+}
+
+static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
+ unsigned offset, enum nmk_gpio_slpm mode)
+{
+ u32 bit = 1 << offset;
+ u32 slpm;
+
+ slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
+ if (mode == NMK_GPIO_SLPM_NOCHANGE)
+ slpm |= bit;
+ else
+ slpm &= ~bit;
+ writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
+}
+
+static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
+ unsigned offset, enum nmk_gpio_pull pull)
+{
+ u32 bit = 1 << offset;
+ u32 pdis;
+
+ pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
+ if (pull == NMK_GPIO_PULL_NONE)
+ pdis |= bit;
+ else
+ pdis &= ~bit;
+ writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
+
+ if (pull == NMK_GPIO_PULL_UP)
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+ else if (pull == NMK_GPIO_PULL_DOWN)
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
+ unsigned offset)
+{
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+}
+
+static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
+ pin_cfg_t cfg)
+{
+ static const char *afnames[] = {
+ [NMK_GPIO_ALT_GPIO] = "GPIO",
+ [NMK_GPIO_ALT_A] = "A",
+ [NMK_GPIO_ALT_B] = "B",
+ [NMK_GPIO_ALT_C] = "C"
+ };
+ static const char *pullnames[] = {
+ [NMK_GPIO_PULL_NONE] = "none",
+ [NMK_GPIO_PULL_UP] = "up",
+ [NMK_GPIO_PULL_DOWN] = "down",
+ [3] /* illegal */ = "??"
+ };
+ static const char *slpmnames[] = {
+ [NMK_GPIO_SLPM_INPUT] = "input",
+ [NMK_GPIO_SLPM_NOCHANGE] = "no-change",
+ };
+
+ int pin = PIN_NUM(cfg);
+ int pull = PIN_PULL(cfg);
+ int af = PIN_ALT(cfg);
+ int slpm = PIN_SLPM(cfg);
+
+ dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n",
+ pin, afnames[af], pullnames[pull], slpmnames[slpm]);
+
+ __nmk_gpio_make_input(nmk_chip, offset);
+ __nmk_gpio_set_pull(nmk_chip, offset, pull);
+ __nmk_gpio_set_slpm(nmk_chip, offset, slpm);
+ __nmk_gpio_set_mode(nmk_chip, offset, af);
+}
+
+/**
+ * nmk_config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration. The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects. The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+int nmk_config_pin(pin_cfg_t cfg)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ int gpio = PIN_NUM(cfg);
+ unsigned long flags;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(nmk_config_pin);
+
+/**
+ * nmk_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using nmk_config_pin(). Refer to that function for
+ * further information.
+ */
+int nmk_config_pins(pin_cfg_t *cfgs, int num)
+{
+ int ret = 0;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ int ret = nmk_config_pin(cfgs[i]);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins);
+
+/**
+ * nmk_gpio_set_slpm() - configure the sleep mode of a pin
+ * @gpio: pin number
+ * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
+ *
+ * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is
+ * changed to an input (with pullup/down enabled) in sleep and deep sleep. If
+ * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
+ * configured even when in sleep and deep sleep.
+ */
+int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
+}
+
+/**
+ * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin. This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input. Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
+}
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
return 0;
@@ -111,32 +301,41 @@
writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
}
+enum nmk_gpio_irq_type {
+ NORMAL,
+ WAKE,
+};
+
static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
- int gpio, bool enable)
+ int gpio, enum nmk_gpio_irq_type which,
+ bool enable)
{
+ u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
+ u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
u32 bitmask = nmk_gpio_get_bitmask(gpio);
u32 reg;
/* we must individually set/clear the two edges */
if (nmk_chip->edge_rising & bitmask) {
- reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+ reg = readl(nmk_chip->addr + rimsc);
if (enable)
reg |= bitmask;
else
reg &= ~bitmask;
- writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+ writel(reg, nmk_chip->addr + rimsc);
}
if (nmk_chip->edge_falling & bitmask) {
- reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+ reg = readl(nmk_chip->addr + fimsc);
if (enable)
reg |= bitmask;
else
reg &= ~bitmask;
- writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+ writel(reg, nmk_chip->addr + fimsc);
}
}
-static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which,
+ bool enable)
{
int gpio;
struct nmk_gpio_chip *nmk_chip;
@@ -147,26 +346,35 @@
nmk_chip = get_irq_chip_data(irq);
bitmask = nmk_gpio_get_bitmask(gpio);
if (!nmk_chip)
- return;
+ return -EINVAL;
spin_lock_irqsave(&nmk_chip->lock, flags);
- __nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+ __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
}
static void nmk_gpio_irq_mask(unsigned int irq)
{
- nmk_gpio_irq_modify(irq, false);
-};
+ nmk_gpio_irq_modify(irq, NORMAL, false);
+}
static void nmk_gpio_irq_unmask(unsigned int irq)
{
- nmk_gpio_irq_modify(irq, true);
+ nmk_gpio_irq_modify(irq, NORMAL, true);
+}
+
+static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ return nmk_gpio_irq_modify(irq, WAKE, on);
}
static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
{
- bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+ struct irq_desc *desc = irq_to_desc(irq);
+ bool enabled = !(desc->status & IRQ_DISABLED);
+ bool wake = desc->wake_depth;
int gpio;
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
@@ -186,7 +394,10 @@
spin_lock_irqsave(&nmk_chip->lock, flags);
if (enabled)
- __nmk_gpio_irq_modify(nmk_chip, gpio, false);
+ __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
+
+ if (wake)
+ __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
nmk_chip->edge_rising &= ~bitmask;
if (type & IRQ_TYPE_EDGE_RISING)
@@ -197,7 +408,10 @@
nmk_chip->edge_falling |= bitmask;
if (enabled)
- __nmk_gpio_irq_modify(nmk_chip, gpio, true);
+ __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
+
+ if (wake)
+ __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
@@ -210,6 +424,7 @@
.mask = nmk_gpio_irq_mask,
.unmask = nmk_gpio_irq_unmask,
.set_type = nmk_gpio_irq_set_type,
+ .set_wake = nmk_gpio_irq_set_wake,
};
static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -266,16 +481,6 @@
return 0;
}
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
- int val)
-{
- struct nmk_gpio_chip *nmk_chip =
- container_of(chip, struct nmk_gpio_chip, chip);
-
- writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
- return 0;
-}
-
static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
{
struct nmk_gpio_chip *nmk_chip =
@@ -298,12 +503,33 @@
writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
}
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+ nmk_gpio_set_output(chip, offset, val);
+
+ return 0;
+}
+
+static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
+}
+
/* This structure is replicated for each GPIO block allocated at probe time */
static struct gpio_chip nmk_gpio_template = {
.direction_input = nmk_gpio_make_input,
.get = nmk_gpio_get_input,
.direction_output = nmk_gpio_make_output,
.set = nmk_gpio_set_output,
+ .to_irq = nmk_gpio_to_irq,
.ngpio = NMK_GPIO_PER_CHIP,
.can_sleep = 0,
};
@@ -393,30 +619,12 @@
return ret;
}
-static int __exit nmk_gpio_remove(struct platform_device *dev)
-{
- struct nmk_gpio_chip *nmk_chip;
- struct resource *res;
-
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
- nmk_chip = platform_get_drvdata(dev);
- gpiochip_remove(&nmk_chip->chip);
- clk_disable(nmk_chip->clk);
- clk_put(nmk_chip->clk);
- kfree(nmk_chip);
- release_mem_region(res->start, resource_size(res));
- return 0;
-}
-
-
static struct platform_driver nmk_gpio_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "gpio",
},
.probe = nmk_gpio_probe,
- .remove = __exit_p(nmk_gpio_remove),
.suspend = NULL, /* to be done */
.resume = NULL,
};
@@ -426,7 +634,7 @@
return platform_driver_register(&nmk_gpio_driver);
}
-arch_initcall(nmk_gpio_init);
+core_initcall(nmk_gpio_init);
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
MODULE_DESCRIPTION("Nomadik GPIO Driver");
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 4200811..aba3551 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -55,6 +55,21 @@
#define NMK_GPIO_ALT_B 2
#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+/* Pull up/down values */
+enum nmk_gpio_pull {
+ NMK_GPIO_PULL_NONE,
+ NMK_GPIO_PULL_UP,
+ NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+ NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
extern int nmk_gpio_get_mode(int gpio);
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 42c9072..65704a3 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,6 +1,12 @@
#ifndef __PLAT_MTU_H
#define __PLAT_MTU_H
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
/* should be set by the platform code */
extern void __iomem *mtu_base;
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
new file mode 100644
index 0000000..7eed11c
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ *
+ * Based on arch/arm/mach-pxa/include/mach/mfp.h:
+ * Copyright (C) 2007 Marvell International Ltd.
+ * eric miao <eric.miao@marvell.com>
+ */
+
+#ifndef __PLAT_PINCFG_H
+#define __PLAT_PINCFG_H
+
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ * bit 0.. 8 - Pin Number (512 Pins Maximum)
+ * bit 9..10 - Alternate Function Selection
+ * bit 11..12 - Pull up/down state
+ * bit 13 - Sleep mode behaviour
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ * pull up/down = disabled
+ * sleep mode = input
+ *
+ * PIN_CFG - default config with alternate function
+ * PIN_CFG_PULL - default config with alternate function and pull up/down
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK 0x1ff
+#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT 9
+#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT 11
+#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT 13
+#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+
+#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT)
+
+#define PIN_CFG(num, alt) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_PULL(num, alt, pull) \
+ ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
+ (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
+
+extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+
+#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 08aaa4a..ea3ca86 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -42,7 +42,6 @@
.rating = 200,
.read = nmdk_read_timer_dummy,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -82,6 +81,12 @@
case CLOCK_EVT_MODE_UNUSED:
/* disable irq */
writel(0, mtu_base + MTU_IMSC);
+ /* disable timer */
+ cr = readl(mtu_base + MTU_CR(1));
+ cr &= ~MTU_CRn_ENA;
+ writel(cr, mtu_base + MTU_CR(1));
+ /* load some high default value */
+ writel(0xffffffff, mtu_base + MTU_LR(1));
break;
case CLOCK_EVT_MODE_RESUME:
break;
@@ -98,7 +103,6 @@
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
@@ -151,6 +155,7 @@
} else {
cr |= MTU_CRn_PRESCALE_1;
}
+ clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
/* Timer 0 is the free running clocksource */
writel(cr, mtu_base + MTU_CR(0));
@@ -158,7 +163,6 @@
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
- nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
/* Now the scheduling clock is ready */
nmdk_clksrc.read = nmdk_read_timer;
@@ -175,8 +179,10 @@
} else {
cr |= MTU_CRn_PRESCALE_1;
}
+ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
+
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
- nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+
nmdk_clkevt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 219c01e..ebed826 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -22,6 +22,7 @@
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -35,6 +36,7 @@
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/serial.h>
+#include <plat/vram.h>
#include <plat/clock.h>
@@ -81,6 +83,12 @@
}
EXPORT_SYMBOL(omap_get_var_config);
+void __init omap_reserve(void)
+{
+ omapfb_reserve_sdram_memblock();
+ omap_vram_reserve_sdram_memblock();
+}
+
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index d3eea4f..0054b95 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -26,7 +26,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/io.h>
#include <linux/omapfb.h>
@@ -171,49 +171,78 @@
return 0;
}
+static int valid_sdram(unsigned long addr, unsigned long size)
+{
+ struct memblock_property res;
+
+ res.base = addr;
+ res.size = size;
+ return !memblock_find(&res) && res.base == addr && res.size == size;
+}
+
+static int reserve_sdram(unsigned long addr, unsigned long size)
+{
+ if (memblock_is_region_reserved(addr, size))
+ return -EBUSY;
+ if (memblock_reserve(addr, size))
+ return -ENOMEM;
+ return 0;
+}
+
/*
* Called from map_io. We need to call to this early enough so that we
* can reserve the fixed SDRAM regions before VM could get hold of them.
*/
-void __init omapfb_reserve_sdram(void)
+void __init omapfb_reserve_sdram_memblock(void)
{
- struct bootmem_data *bdata;
- unsigned long sdram_start, sdram_size;
- unsigned long reserved;
- int i;
+ unsigned long reserved = 0;
+ int i;
if (config_invalid)
return;
- bdata = NODE_DATA(0)->bdata;
- sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
- sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
- reserved = 0;
for (i = 0; ; i++) {
- struct omapfb_mem_region rg;
+ struct omapfb_mem_region rg;
if (get_fbmem_region(i, &rg) < 0)
break;
+
if (i == OMAPFB_PLANE_NUM) {
- printk(KERN_ERR
- "Extraneous FB mem configuration entries\n");
+ pr_err("Extraneous FB mem configuration entries\n");
config_invalid = 1;
return;
}
+
/* Check if it's our memory type. */
- if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
- sdram_start, sdram_size) < 0 ||
- (rg.type != OMAPFB_MEMTYPE_SDRAM))
+ if (rg.type != OMAPFB_MEMTYPE_SDRAM)
continue;
- BUG_ON(omapfb_config.mem_desc.region[i].size);
- if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+
+ /* Check if the region falls within SDRAM */
+ if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
+ continue;
+
+ if (rg.size == 0) {
+ pr_err("Zero size for FB region %d\n", i);
config_invalid = 1;
return;
}
+
if (rg.paddr) {
- reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
+ if (reserve_sdram(rg.paddr, rg.size)) {
+ pr_err("Trying to use reserved memory for FB region %d\n",
+ i);
+ config_invalid = 1;
+ return;
+ }
reserved += rg.size;
}
+
+ if (omapfb_config.mem_desc.region[i].size) {
+ pr_err("FB region %d already set\n", i);
+ config_invalid = 1;
+ return;
+ }
+
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
@@ -359,7 +388,10 @@
arch_initcall(omap_init_fb);
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
@@ -375,7 +407,10 @@
{
}
-void omapfb_reserve_sdram(void) {}
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index d265018..5e4afbe 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -34,6 +34,8 @@
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
+extern void omap_reserve(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index edd4987..0aa4ecd 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -38,7 +38,7 @@
extern void omap_vram_set_sdram_vram(u32 size, u32 start);
extern void omap_vram_set_sram_vram(u32 size, u32 start);
-extern void omap_vram_reserve_sdram(void);
+extern void omap_vram_reserve_sdram_memblock(void);
extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
@@ -48,7 +48,7 @@
static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
-static inline void omap_vram_reserve_sdram(void) { }
+static inline void omap_vram_reserve_sdram_memblock(void) { }
static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 1670734..37fa593 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -17,8 +17,8 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base
- movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base
+ moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base
+ movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
.macro senduart, rd, rx
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index a1025d3..ab21165 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -58,6 +58,11 @@
#define INT_STATUS 0x1
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define SPEAR_MIN_RANGE 4
+
static __iomem void *gpt_base;
static struct clk *gpt_clk;
@@ -66,44 +71,6 @@
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
-/*
- * Following clocksource_set_clock and clockevent_set_clock picked
- * from arch/mips/kernel/time.c
- */
-
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
- u64 temp;
- u32 shift;
-
- /* Find a shift value */
- for (shift = 32; shift > 0; shift--) {
- temp = (u64) NSEC_PER_SEC << shift;
- do_div(temp, clock);
- if ((temp >> 32) == 0)
- break;
- }
- cs->shift = shift;
- cs->mult = (u32) temp;
-}
-
-void __init clockevent_set_clock(struct clock_event_device *cd,
- unsigned int clock)
-{
- u64 temp;
- u32 shift;
-
- /* Find a shift value */
- for (shift = 32; shift > 0; shift--) {
- temp = (u64) clock << shift;
- do_div(temp, NSEC_PER_SEC);
- if ((temp >> 32) == 0)
- break;
- }
- cd->shift = shift;
- cd->mult = (u32) temp;
-}
-
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
@@ -138,7 +105,7 @@
val |= CTRL_ENABLE ;
writew(val, gpt_base + CR(CLKSRC));
- clocksource_set_clock(&clksrc, tick_rate);
+ clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
/* register the clocksource */
clocksource_register(&clksrc);
@@ -233,7 +200,7 @@
tick_rate = clk_get_rate(gpt_clk);
tick_rate >>= CTRL_PRESCALER16;
- clockevent_set_clock(&clkevt, tick_rate);
+ clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
&clkevt);
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 9b1a668..5cf88e8 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -2,3 +2,7 @@
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifeq ($(CONFIG_LEDS_CLASS),y)
+obj-$(CONFIG_ARCH_REALVIEW) += leds.o
+obj-$(CONFIG_ARCH_VERSATILE) += leds.o
+endif
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
new file mode 100644
index 0000000..3169fa5
--- /dev/null
+++ b/arch/arm/plat-versatile/leds.c
@@ -0,0 +1,103 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+#endif
+
+struct versatile_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} versatile_leds[] = {
+ { "versatile:0", "heartbeat", },
+ { "versatile:1", "mmc0", },
+ { "versatile:2", },
+ { "versatile:3", },
+ { "versatile:4", },
+ { "versatile:5", },
+ { "versatile:6", },
+ { "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct versatile_led *led = container_of(cdev,
+ struct versatile_led, cdev);
+ u32 reg = readl(LEDREG);
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+ writel(reg, LEDREG);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+ struct versatile_led *led = container_of(cdev,
+ struct versatile_led, cdev);
+ u32 reg = readl(LEDREG);
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init versatile_leds_init(void)
+{
+ int i;
+
+ /* All ON */
+ writel(0xff, LEDREG);
+ for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+ struct versatile_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = versatile_leds[i].name;
+ led->cdev.brightness_set = versatile_led_set;
+ led->cdev.brightness_get = versatile_led_get;
+ led->cdev.default_trigger = versatile_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(versatile_leds_init);
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a..e6ac0b6 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -54,6 +54,9 @@
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TIOCGRS485 0x542E
+#define TIOCSRS485 0x542F
+
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c7f25bb..6174020 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -5,6 +5,7 @@
#define __ASM_ARCH_BOARD_H
#include <linux/types.h>
+#include <linux/serial.h>
#define GPIO_PIN_NONE (-1)
@@ -35,6 +36,7 @@
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
+ struct serial_rs485 rs485; /* rs485 settings */
};
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 2580e77..f9e5622 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -435,20 +435,21 @@
static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int i;
+ int err, i;
/* Fill up uartclk. */
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
+ err = platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
#ifndef CONFIG_SOC_AU1100
/* Register second MAC if enabled in pinfunc */
- if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+ if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
platform_device_register(&au1xxx_eth1_device);
#endif
- return platform_add_devices(au1xxx_platform_devices,
- ARRAY_SIZE(au1xxx_platform_devices));
+ return err;
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index a9f0336..52d883d 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -67,8 +67,6 @@
void __init board_setup(void)
{
- alchemy_gpio2_enable();
-
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* Enable USB power switch */
alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@
if (assert && devsel != 0)
/* Suppress signal to Cardbus */
- gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
else
- gpio_set_value(1, 1); /* set EXT_IO3 ON */
+ alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
- au_sync_udelay(1);
+ udelay(1);
return 1;
}
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 9f544ba..39c2336 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,9 @@
if (unit > 1)
return -ENODEV;
+ if (unit == 1 && BCMCPU_IS_6338())
+ return -ENODEV;
+
if (!shared_device_registered) {
shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
shared_res[0].end = shared_res[0].start;
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 59dc0c7..c63c56b 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -434,7 +434,7 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
- " addu %0, %2 \n"
+ " daddu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
@@ -446,7 +446,7 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_add \n"
- " addu %0, %2 \n"
+ " daddu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 2f \n"
" .subsection 2 \n"
@@ -479,7 +479,7 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
- " subu %0, %2 \n"
+ " dsubu %0, %2 \n"
" scd %0, %1 \n"
" beqzl %0, 1b \n"
" .set mips0 \n"
@@ -491,7 +491,7 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %0, %1 # atomic64_sub \n"
- " subu %0, %2 \n"
+ " dsubu %0, %2 \n"
" scd %0, %1 \n"
" beqz %0, 2f \n"
" .subsection 2 \n"
@@ -524,10 +524,10 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_add_return \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 2f \n"
- " addu %0, %1, %3 \n"
+ " daddu %0, %1, %3 \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
@@ -576,10 +576,10 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqzl %0, 1b \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@
__asm__ __volatile__(
" .set mips3 \n"
"1: lld %1, %2 # atomic64_sub_return \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" scd %0, %2 \n"
" beqz %0, 2f \n"
- " subu %0, %1, %3 \n"
+ " dsubu %0, %1, %3 \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 1b5a664..baa318a 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -984,16 +984,17 @@
#define __NR_perf_event_open (__NR_Linux + 296)
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
+#define __NR_getdents64 (__NR_Linux + 299)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 298
+#define __NR_Linux_syscalls 299
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 298
+#define __NR_N32_Linux_syscalls 299
#ifdef __KERNEL__
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a5297e2..a4facee 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -419,4 +419,5 @@
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
+ PTR sys_getdents
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index b773c11..e5cdfd6 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -61,11 +61,9 @@
vunmap(vdso);
- pr_notice("init_vdso successfull\n");
-
return 0;
}
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
static unsigned long vdso_addr(unsigned long start)
{
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2fbfa1a..bf80921 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -247,6 +247,8 @@
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
+ controller->io_map_base = mips_io_port_base;
+
register_pci_controller(controller);
}
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
index eee4f3d..98e86dd 100644
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ b/arch/mips/nxp/pnx8550/common/pci.c
@@ -44,6 +44,7 @@
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
+ .io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 2aed50f..64246c9 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -113,7 +113,7 @@
PNX8550_GLB2_ENAB_INTA_O = 0;
/* IO/MEM resources. */
- set_io_port_base(KSEG1);
+ set_io_port_base(PNX8550_PORT_BASE);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 04b3147..b7c03d8 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -944,6 +944,7 @@
.pci_ops = &msp_pci_ops,
.mem_resource = &pci_mem_resource,
.mem_offset = 0,
+ .io_map_base = MSP_PCI_IOSPACE_BASE,
.io_resource = &pci_io_resource,
.io_offset = 0
};
diff --git a/arch/mips/pci/pci-yosemite.c b/arch/mips/pci/pci-yosemite.c
index 0357946..cf5e1a2 100644
--- a/arch/mips/pci/pci-yosemite.c
+++ b/arch/mips/pci/pci-yosemite.c
@@ -54,6 +54,7 @@
panic(ioremap_failed);
set_io_port_base(io_v_base);
+ py_controller.io_map_base = io_v_base;
TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
ioport_resource.end = TITAN_IO_SIZE - 1;
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 8ee7788..9ec523e 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -472,6 +472,9 @@
* it*/
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+ /* Cronus and Cronus Lite have the same register map */
+ set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
/* ASIC version will determine if this is a real CronusLite or
* Castrati(Cronus) */
chipversion = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@
else
asic = ASIC_CRONUSLITE;
- /* Cronus and Cronus Lite have the same register map */
- set_register_map(CRONUS_IO_BASE, &cronus_register_map);
gp_resources = non_dvr_cronuslite_resources;
pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
"chipversion=0x%08X\n",
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 2a9cd74..076327f 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -8,9 +8,9 @@
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
* and therefore we can only deal with memory within this range
*/
-#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
-#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
-#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
+#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1)
#else
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2102b21..0e398cf 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -250,7 +250,9 @@
int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
pte_t *ptep, unsigned long trap, int local, int ssize,
unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+ unsigned long vsid, unsigned long trap,
+ int ssize, int psize, unsigned long pte);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index 369872f..babccee 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -566,9 +566,9 @@
* Finally record data if requested.
*/
if (record) {
- struct perf_sample_data data = {
- .period = event->hw.last_period,
- };
+ struct perf_sample_data data;
+
+ perf_sample_data_init(&data, 0);
if (perf_event_overflow(event, nmi, &data, regs)) {
/*
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9d39539..fed9bf6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -414,7 +414,7 @@
u64 base, size, memblock_size;
unsigned int is_kexec_kdump = 0, rngs;
- ls = of_get_flat_dt_prop(node, "ibm,memblock-size", &l);
+ ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
return 0;
memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a719f53..3079f6b 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -68,9 +68,6 @@
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
@@ -347,9 +344,6 @@
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
@@ -687,9 +681,6 @@
std r8,STK_PARM(r8)(r1)
std r9,STK_PARM(r9)(r1)
- /* Add _PAGE_PRESENT to access */
- ori r4,r4,_PAGE_PRESENT
-
/* Save non-volatile registers.
* r31 will hold "old PTE"
* r30 is "new PTE"
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 98f262d..09dffe6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -871,6 +871,18 @@
}
#endif
+void hash_failure_debug(unsigned long ea, unsigned long access,
+ unsigned long vsid, unsigned long trap,
+ int ssize, int psize, unsigned long pte)
+{
+ if (!printk_ratelimit())
+ return;
+ pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+ ea, access, current->comm);
+ pr_info(" trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+ trap, vsid, ssize, psize, pte);
+}
+
/* Result code is:
* 0 - handled
* 1 - normal page fault
@@ -955,6 +967,17 @@
return 1;
}
+ /* Add _PAGE_PRESENT to the required access perm */
+ access |= _PAGE_PRESENT;
+
+ /* Pre-check access permissions (will be re-checked atomically
+ * in __hash_page_XX but this pre-check is a fast path
+ */
+ if (access & ~pte_val(*ptep)) {
+ DBG_LOW(" no access !\n");
+ return 1;
+ }
+
#ifdef CONFIG_HUGETLB_PAGE
if (hugeshift)
return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@
DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
pte_val(*(ptep + PTRS_PER_PTE)));
#endif
- /* Pre-check access permissions (will be re-checked atomically
- * in __hash_page_XX but this pre-check is a fast path
- */
- if (access & ~pte_val(*ptep)) {
- DBG_LOW(" no access !\n");
- return 1;
- }
-
/* Do actual hashing */
#ifdef CONFIG_PPC_64K_PAGES
/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@
local, ssize, spp);
}
+ /* Dump some info in case of hash insertion failure, they should
+ * never happen so it is really useful to know if/when they do
+ */
+ if (rc == -1)
+ hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+ pte_val(*ptep));
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
#else
@@ -1051,8 +1072,7 @@
void *pgdir;
pte_t *ptep;
unsigned long flags;
- int local = 0;
- int ssize;
+ int rc, ssize, local = 0;
BUG_ON(REGION_ID(ea) != USER_REGION_ID);
@@ -1098,11 +1118,18 @@
/* Hash it in */
#ifdef CONFIG_PPC_HAS_HASH_64K
if (mm->context.user_psize == MMU_PAGE_64K)
- __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+ rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
else
#endif /* CONFIG_PPC_HAS_HASH_64K */
- __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
- subpage_protection(pgdir, ea));
+ rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+ subpage_protection(pgdir, ea));
+
+ /* Dump some info in case of hash insertion failure, they should
+ * never happen so it is really useful to know if/when they do
+ */
+ if (rc == -1)
+ hash_failure_debug(ea, access, vsid, trap, ssize,
+ mm->context.user_psize, pte_val(*ptep));
local_irq_restore(flags);
}
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 1995398..cc5c273 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -21,21 +21,13 @@
unsigned long old_pte, new_pte;
unsigned long va, rflags, pa, sz;
long slot;
- int err = 1;
BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
/* Search the Linux page table for a match with va */
va = hpt_va(ea, vsid, ssize);
- /*
- * Check the user's access rights to the page. If access should be
- * prevented then send the problem up to do_page_fault.
- */
- if (unlikely(access & ~pte_val(*ptep)))
- goto out;
- /*
- * At this point, we have a pte (old_pte) which can be used to build
+ /* At this point, we have a pte (old_pte) which can be used to build
* or update an HPTE. There are 2 cases:
*
* 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@
do {
old_pte = pte_val(*ptep);
- if (old_pte & _PAGE_BUSY)
- goto out;
+ /* If PTE busy, retry the access */
+ if (unlikely(old_pte & _PAGE_BUSY))
+ return 0;
+ /* If PTE permissions don't match, take page fault */
+ if (unlikely(access & ~old_pte))
+ return 1;
+ /* Try to lock the PTE, add ACCESSED and DIRTY if it was
+ * a write access */
new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+ if (access & _PAGE_RW)
+ new_pte |= _PAGE_DIRTY;
} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
old_pte, new_pte));
@@ -121,8 +121,16 @@
}
}
- if (unlikely(slot == -2))
- panic("hash_huge_page: pte_insert failed\n");
+ /*
+ * Hypervisor failure. Restore old pte and return -1
+ * similar to __hash_page_*
+ */
+ if (unlikely(slot == -2)) {
+ *ptep = __pte(old_pte);
+ hash_failure_debug(ea, access, vsid, trap, ssize,
+ mmu_psize, old_pte);
+ return -1;
+ }
new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
}
@@ -131,9 +139,5 @@
* No need to use ldarx/stdcx here
*/
*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
- err = 0;
-
- out:
- return err;
+ return 0;
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index f473645..aa731af 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -398,15 +398,15 @@
}
/*
- * Retreive and validate the ibm,memblock-size property for drconf memory
+ * Retreive and validate the ibm,lmb-size property for drconf memory
* from the device tree.
*/
-static u64 of_get_memblock_size(struct device_node *memory)
+static u64 of_get_lmb_size(struct device_node *memory)
{
const u32 *prop;
u32 len;
- prop = of_get_property(memory, "ibm,memblock-size", &len);
+ prop = of_get_property(memory, "ibm,lmb-size", &len);
if (!prop || len < sizeof(unsigned int))
return 0;
@@ -562,7 +562,7 @@
static inline int __init read_usm_ranges(const u32 **usm)
{
/*
- * For each memblock in ibm,dynamic-memory a corresponding
+ * For each lmb in ibm,dynamic-memory a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter followed by that many (base, size) duple.
* read the counter from linux,drconf-usable-memory
@@ -578,7 +578,7 @@
{
const u32 *dm, *usm;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
- unsigned long memblock_size, base, size, sz;
+ unsigned long lmb_size, base, size, sz;
int nid;
struct assoc_arrays aa;
@@ -586,8 +586,8 @@
if (!n)
return;
- memblock_size = of_get_memblock_size(memory);
- if (!memblock_size)
+ lmb_size = of_get_lmb_size(memory);
+ if (!lmb_size)
return;
rc = of_get_assoc_arrays(memory, &aa);
@@ -611,7 +611,7 @@
continue;
base = drmem.base_addr;
- size = memblock_size;
+ size = lmb_size;
ranges = 1;
if (is_kexec_kdump) {
@@ -1072,7 +1072,7 @@
{
const u32 *dm;
unsigned int drconf_cell_cnt, rc;
- unsigned long memblock_size;
+ unsigned long lmb_size;
struct assoc_arrays aa;
int nid = -1;
@@ -1080,8 +1080,8 @@
if (!drconf_cell_cnt)
return -1;
- memblock_size = of_get_memblock_size(memory);
- if (!memblock_size)
+ lmb_size = of_get_lmb_size(memory);
+ if (!lmb_size)
return -1;
rc = of_get_assoc_arrays(memory, &aa);
@@ -1100,7 +1100,7 @@
continue;
if ((scn_addr < drmem.base_addr)
- || (scn_addr >= (drmem.base_addr + memblock_size)))
+ || (scn_addr >= (drmem.base_addr + lmb_size)))
continue;
nid = of_drconf_to_nid_single(&drmem, &aa);
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index deab5f9..bc88036 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -69,7 +69,7 @@
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int memblock_size;
+ unsigned int lmb_size;
int ret = -EINVAL;
/*
@@ -87,9 +87,9 @@
return ret;
base = *(unsigned long *)regs;
- memblock_size = regs[3];
+ lmb_size = regs[3];
- ret = pseries_remove_memblock(base, memblock_size);
+ ret = pseries_remove_memblock(base, lmb_size);
return ret;
}
@@ -98,7 +98,7 @@
const char *type;
const unsigned int *regs;
unsigned long base;
- unsigned int memblock_size;
+ unsigned int lmb_size;
int ret = -EINVAL;
/*
@@ -116,36 +116,36 @@
return ret;
base = *(unsigned long *)regs;
- memblock_size = regs[3];
+ lmb_size = regs[3];
/*
* Update memory region to represent the memory add
*/
- ret = memblock_add(base, memblock_size);
+ ret = memblock_add(base, lmb_size);
return (ret < 0) ? -EINVAL : 0;
}
static int pseries_drconf_memory(unsigned long *base, unsigned int action)
{
struct device_node *np;
- const unsigned long *memblock_size;
+ const unsigned long *lmb_size;
int rc;
np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (!np)
return -EINVAL;
- memblock_size = of_get_property(np, "ibm,memblock-size", NULL);
- if (!memblock_size) {
+ lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
+ if (!lmb_size) {
of_node_put(np);
return -EINVAL;
}
if (action == PSERIES_DRCONF_MEM_ADD) {
- rc = memblock_add(*base, *memblock_size);
+ rc = memblock_add(*base, *lmb_size);
rc = (rc < 0) ? -EINVAL : 0;
} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
- rc = pseries_remove_memblock(*base, *memblock_size);
+ rc = pseries_remove_memblock(*base, *lmb_size);
} else {
rc = -EINVAL;
}
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 259e3fd..1dc07a0 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc3
-# Sat Apr 3 15:49:56 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
@@ -107,10 +107,9 @@
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
@@ -239,6 +238,7 @@
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
@@ -351,6 +351,7 @@
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
@@ -367,6 +368,7 @@
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
+CONFIG_RPS=y
#
# Network testing
@@ -386,9 +388,14 @@
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -658,6 +665,7 @@
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
@@ -734,6 +742,8 @@
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
@@ -766,6 +776,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -778,7 +789,6 @@
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
@@ -816,6 +826,7 @@
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
@@ -840,6 +851,7 @@
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_SPARCSPKR=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -848,6 +860,7 @@
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
@@ -871,6 +884,7 @@
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -893,6 +907,8 @@
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -1306,11 +1322,14 @@
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
@@ -1328,7 +1347,9 @@
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
@@ -1342,6 +1363,7 @@
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1356,7 +1378,6 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -1521,10 +1542,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1706,8 +1723,8 @@
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1742,6 +1759,9 @@
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1769,12 +1789,12 @@
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
@@ -1895,6 +1915,7 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 0588b8c..69358b5 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -11,7 +11,6 @@
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
#ifdef CONFIG_SPARC32
#define SMP_CACHE_BYTES_SHIFT 5
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 77f906d..0ece77f 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@
#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-BTFIXUPDEF_SETHI(none_mask)
BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
static inline int pte_none(pte_t pte)
{
- return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+ return !pte_val(pte);
}
#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@
static inline int pmd_none(pmd_t pmd)
{
- return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+ return !pmd_val(pmd);
}
#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 0ec92c8..44faabc 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -657,6 +657,7 @@
cpuc->current_idx[i] = idx;
enc = perf_event_get_enc(cpuc->events[i]);
+ pcr &= ~mask_for_index(idx);
pcr |= event_encoding(enc, idx);
}
out:
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a7..e11b461 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@
goto out_unlock;
}
- if (action && tmp)
+ if (tmp)
tmp->next = action->next;
else
*actionp = action->next;
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837f..c6dfdaa 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@
tl0_irq6: BTRAP(0x46)
#endif
tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
tl0_irq8: TRAP_IRQ(smp_kgdb_capture_client, 8)
#else
tl0_irq8: BTRAP(0x48)
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index f5f75a5..b0b43aa 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2215,8 +2215,6 @@
BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
- BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index cf38846..4289f90 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2087,9 +2087,6 @@
BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
- /* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
- /* BTFIXUPSET_SETHI(none_mask, 0x00000000); */ /* Defaults to zero? */
-
BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
#if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5..fb7a5f0 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@
percpu_entry->states[cx->index].eax = cx->address;
percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
}
+
+ /*
+ * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+ * then we should skip checking BM_STS for this C-state.
+ * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+ */
+ if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+ cx->bm_sts_skip = 1;
+
return retval;
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e5086..fcc3c61f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,9 +157,14 @@
#ifdef CONFIG_HIBERNATION
if (strncmp(str, "s4_nohwsig", 10) == 0)
acpi_no_s4_hw_signature();
- if (strncmp(str, "s4_nonvs", 8) == 0)
- acpi_s4_no_nvs();
+ if (strncmp(str, "s4_nonvs", 8) == 0) {
+ pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+ "please use acpi_sleep=nonvs instead");
+ acpi_nvs_nosave();
+ }
#endif
+ if (strncmp(str, "nonvs", 5) == 0)
+ acpi_nvs_nosave();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c02cc69..a96489e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -921,7 +921,7 @@
unsigned int value;
/* APIC hasn't been mapped yet */
- if (!apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
clear_local_APIC();
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
index ce7cde7..a36de5b 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -368,22 +368,16 @@
return -ENODEV;
out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (out_obj->type != ACPI_TYPE_BUFFER)
+ return -ENODEV;
errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
- if (errors) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (errors)
+ return -ENODEV;
supported = *((u32 *)(out_obj->buffer.pointer + 4));
- if (!(supported & 0x1)) {
- ret = -ENODEV;
- goto out_free;
- }
+ if (!(supported & 0x1))
+ return -ENODEV;
out_free:
kfree(output.pointer);
@@ -397,13 +391,17 @@
struct pcc_memory_resource *mem_resource;
struct pcc_register_resource *reg_resource;
union acpi_object *out_obj, *member;
- acpi_handle handle, osc_handle;
+ acpi_handle handle, osc_handle, pcch_handle;
int ret = 0;
status = acpi_get_handle(NULL, "\\_SB", &handle);
if (ACPI_FAILURE(status))
return -ENODEV;
+ status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
status = acpi_get_handle(handle, "_OSC", &osc_handle);
if (ACPI_SUCCESS(status)) {
ret = pcc_cpufreq_do_osc(&osc_handle);
@@ -543,13 +541,13 @@
if (!pcch_virt_addr) {
result = -1;
- goto pcch_null;
+ goto out;
}
result = pcc_get_offset(cpu);
if (result) {
dprintk("init: PCCP evaluation failed\n");
- goto free;
+ goto out;
}
policy->max = policy->cpuinfo.max_freq =
@@ -558,14 +556,15 @@
ioread32(&pcch_hdr->minimum_frequency) * 1000;
policy->cur = pcc_get_freq(cpu);
+ if (!policy->cur) {
+ dprintk("init: Unable to get current CPU frequency\n");
+ result = -EINVAL;
+ goto out;
+ }
+
dprintk("init: policy->max is %d, policy->min is %d\n",
policy->max, policy->min);
-
- return 0;
-free:
- pcc_clear_mapping();
- free_percpu(pcc_cpu_info);
-pcch_null:
+out:
return result;
}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 7ec2123..3e90cce 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1023,13 +1023,12 @@
}
if (max_latency == 0) {
/*
- * Fam 11h always returns 0 as transition latency.
- * This is intended and means "very fast". While cpufreq core
- * and governors currently can handle that gracefully, better
- * set it to 1 to avoid problems in the future.
- * For all others it's a BIOS bug.
+ * Fam 11h and later may return 0 as transition latency. This
+ * is intended and means "very fast". While cpufreq core and
+ * governors currently can handle that gracefully, better set it
+ * to 1 to avoid problems in the future.
*/
- if (boot_cpu_data.x86 != 0x11)
+ if (boot_cpu_data.x86 < 0x11)
printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
"latency\n");
max_latency = 1;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85c..e5cc7e8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/hpet.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
@@ -191,6 +192,21 @@
}
#endif
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+ hpet_readback_cmp = 1;
+#endif
+}
+
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+ { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
{}
};
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff1..4db7c4d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@
* masked off.
*/
sysret_audit:
- movq %rax,%rsi /* second arg, syscall return value */
- cmpq $0,%rax /* is it < 0? */
+ movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
+ cmpq $0,%rsi /* is it < 0? */
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a198b7c..ba390d7 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -964,7 +964,7 @@
void hpet_disable(void)
{
- if (is_hpet_capable()) {
+ if (is_hpet_capable() && hpet_virt_address) {
unsigned int cfg = hpet_readl(HPET_CFG);
if (hpet_legacy_int_enabled) {
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 7c9f02c..cafa7c8 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -276,16 +276,6 @@
.cls = &i8259_sysdev_class,
};
-static int __init i8259A_init_sysfs(void)
-{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
static void mask_8259A(void)
{
unsigned long flags;
@@ -407,3 +397,18 @@
};
struct legacy_pic *legacy_pic = &default_legacy_pic;
+
+static int __init i8259A_init_sysfs(void)
+{
+ int error;
+
+ if (legacy_pic != &default_legacy_pic)
+ return 0;
+
+ error = sysdev_class_register(&i8259_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_i8259A);
+ return error;
+}
+
+device_initcall(i8259A_init_sysfs);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 4f4af75..01ab17a 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -572,7 +572,6 @@
return NOTIFY_STOP;
}
-#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
int kgdb_ll_trap(int cmd, const char *str,
struct pt_regs *regs, long err, int trap, int sig)
{
@@ -590,7 +589,6 @@
return __kgdb_notify(&args, cmd);
}
-#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
static int
kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
@@ -625,6 +623,12 @@
return register_die_notifier(&kgdb_notifier);
}
+static void kgdb_hw_overflow_handler(struct perf_event *event, int nmi,
+ struct perf_sample_data *data, struct pt_regs *regs)
+{
+ kgdb_ll_trap(DIE_DEBUG, "debug", regs, 0, 0, SIGTRAP);
+}
+
void kgdb_arch_late(void)
{
int i, cpu;
@@ -655,6 +659,7 @@
for_each_online_cpu(cpu) {
pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
pevent[0]->hw.sample_period = 1;
+ pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
if (pevent[0]->destroy != NULL) {
pevent[0]->destroy = NULL;
release_bp_slot(*pevent);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 345a4b1..675879b 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -640,8 +640,8 @@
/* Skip cs, ip, orig_ax and gs. */ \
" subl $16, %esp\n" \
" pushl %fs\n" \
- " pushl %ds\n" \
" pushl %es\n" \
+ " pushl %ds\n" \
" pushl %eax\n" \
" pushl %ebp\n" \
" pushl %edi\n" \
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e72d3fc..939b9e9 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -498,15 +498,10 @@
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
- *
- * Also force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = 1;
- hpet_readback_cmp = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index de3b63a..a60df9a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -238,6 +238,15 @@
#ifdef CONFIG_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
+ /*
+ * Ensure that the boot cpu numa_node is correct when the boot
+ * cpu is on a node that doesn't have memory installed.
+ * Also cpu_up() will call cpu_to_node() for APs when
+ * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+ * up later with c_init aka intel_init/amd_init.
+ * So set them all (boot cpu and all APs).
+ */
+ set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
#endif
#endif
/*
@@ -257,14 +266,6 @@
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
- /*
- * make sure boot cpu numa_node is right, when boot cpu is on the
- * node that doesn't have mem installed
- */
- set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id));
-#endif
-
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 3699613..b1ed0a1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2926,7 +2926,7 @@
return kvm_mmu_zap_page(kvm, page) + 1;
}
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
struct kvm *kvm;
struct kvm *kvm_freed = NULL;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 89d66ca..2331bdc 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -342,6 +342,7 @@
/* advance table_gfn when emulating 1gb pages with 4k */
if (delta == 0)
table_gfn += PT_INDEX(addr, level);
+ access &= gw->pte_access;
} else {
direct = 0;
table_gfn = gw->table_gfn[level - 2];
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05d571f..7fa89c3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1562,7 +1562,7 @@
r = -ENOMEM;
size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
- entries = vmalloc(size);
+ entries = kmalloc(size, GFP_KERNEL);
if (!entries)
goto out;
@@ -1581,7 +1581,7 @@
r = n;
out_free:
- vfree(entries);
+ kfree(entries);
out:
return r;
}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 6fdb3ec..5525309 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -184,6 +184,7 @@
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
/* We'll assign a new address later */
+ dev->fw_addr[idx] = r->start;
r->end -= r->start;
r->start = 0;
}
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 7ef3a27..cb29191 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -66,8 +66,9 @@
devfn, pos, 4, &pcie_cap))
return 0;
- if (pcie_cap == 0xffffffff)
- return 0;
+ if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+ PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+ break;
if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
@@ -76,7 +77,7 @@
return pos;
}
- pos = pcie_cap >> 20;
+ pos = PCI_EXT_CAP_NEXT(pcie_cap);
}
return 0;
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index 98a6610..a854df2a 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -165,7 +165,7 @@
p = kmalloc(n, GFP_ATOMIC);
if (!p)
- ablkcipher_walk_done(req, walk, -ENOMEM);
+ return ablkcipher_walk_done(req, walk, -ENOMEM);
base = p + 1;
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d97b8dc..18b3f14 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -70,6 +70,7 @@
acpi_status acpi_enable(void)
{
acpi_status status;
+ int retry;
ACPI_FUNCTION_TRACE(acpi_enable);
@@ -98,16 +99,18 @@
/* Sanity check that transition succeeded */
- if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
- ACPI_ERROR((AE_INFO,
- "Hardware did not enter ACPI mode"));
- return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+ for (retry = 0; retry < 30000; ++retry) {
+ if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
+ if (retry != 0)
+ ACPI_WARNING((AE_INFO,
+ "Platform took > %d00 usec to enter ACPI mode", retry));
+ return_ACPI_STATUS(AE_OK);
+ }
+ acpi_os_stall(100); /* 100 usec */
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "Transition to ACPI mode successful\n"));
-
- return_ACPI_STATUS(AE_OK);
+ ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
+ return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
ACPI_EXPORT_SYMBOL(acpi_enable)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3026e3f..dc58402 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -868,9 +868,15 @@
static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
struct acpi_battery *battery = acpi_driver_data(device);
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ struct device *old;
+#endif
if (!battery)
return;
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ old = battery->bat.dev;
+#endif
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
@@ -879,7 +885,7 @@
acpi_battery_present(battery));
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_battery_update could remove power_supply object */
- if (battery->bat.dev)
+ if (old && battery->bat.dev)
power_supply_changed(&battery->bat);
#endif
}
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 01381be..2bb28b9 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -214,7 +214,7 @@
.ident = "Sony VGN-SR290J",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
},
},
{
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5128435..e9699aae 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -223,7 +223,7 @@
type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
cpuid = acpi_get_cpuid(handle, type, acpi_id);
- if (cpuid == -1)
+ if ((cpuid == -1) && (num_possible_cpus() > 1))
return false;
return true;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..e9a8026 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -76,14 +76,19 @@
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
+static int bm_check_disable __read_mostly;
+module_param(bm_check_disable, uint, 0000);
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
+#ifdef CONFIG_ACPI_PROCFS
static u64 us_to_pm_timer_ticks(s64 t)
{
return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
+#endif
+
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
* For now disable this. Probably a bug somewhere else.
@@ -763,6 +768,9 @@
{
u32 bm_status = 0;
+ if (bm_check_disable)
+ return 0;
+
acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
@@ -947,7 +955,7 @@
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
- if (acpi_idle_bm_check()) {
+ if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
if (dev->safe_state) {
dev->last_state = dev->safe_state;
return dev->safe_state->enter(dev, dev->safe_state);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5b7c52e..2862c78 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -82,6 +82,20 @@
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume. Windows does that also for
+ * suspend to RAM. However, it is known that this mechanism does not work on
+ * all machines, so we allow the user to disable it with the help of the
+ * 'acpi_sleep=nonvs' kernel command line option.
+ */
+static bool nvs_nosave;
+
+void __init acpi_nvs_nosave(void)
+{
+ nvs_nosave = true;
+}
+
+/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
@@ -197,8 +211,7 @@
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
- error = suspend_nvs_alloc();
-
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (error)
return error;
@@ -388,20 +401,6 @@
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume. However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
- s4_no_nvs = true;
-}
-
static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;
@@ -415,7 +414,7 @@
{
int error;
- error = s4_no_nvs ? 0 : suspend_nvs_alloc();
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (!error) {
acpi_target_sleep_state = ACPI_STATE_S4;
acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -510,7 +509,7 @@
error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error) {
- if (!s4_no_nvs)
+ if (!nvs_nosave)
error = suspend_nvs_alloc();
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index f60b2b6..d31590e 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -122,6 +122,31 @@
postcore_initcall(amba_init);
+static int amba_get_enable_pclk(struct amba_device *pcdev)
+{
+ struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk");
+ int ret;
+
+ pcdev->pclk = pclk;
+
+ if (IS_ERR(pclk))
+ return PTR_ERR(pclk);
+
+ ret = clk_enable(pclk);
+ if (ret)
+ clk_put(pclk);
+
+ return ret;
+}
+
+static void amba_put_disable_pclk(struct amba_device *pcdev)
+{
+ struct clk *pclk = pcdev->pclk;
+
+ clk_disable(pclk);
+ clk_put(pclk);
+}
+
/*
* These are the device model conversion veneers; they convert the
* device model structures to our more specific structures.
@@ -130,17 +155,33 @@
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *pcdrv = to_amba_driver(dev->driver);
- struct amba_id *id;
+ struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+ int ret;
- id = amba_lookup(pcdrv->id_table, pcdev);
+ do {
+ ret = amba_get_enable_pclk(pcdev);
+ if (ret)
+ break;
- return pcdrv->probe(pcdev, id);
+ ret = pcdrv->probe(pcdev, id);
+ if (ret == 0)
+ break;
+
+ amba_put_disable_pclk(pcdev);
+ } while (0);
+
+ return ret;
}
static int amba_remove(struct device *dev)
{
+ struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *drv = to_amba_driver(dev->driver);
- return drv->remove(to_amba_device(dev));
+ int ret = drv->remove(pcdev);
+
+ amba_put_disable_pclk(pcdev);
+
+ return ret;
}
static void amba_shutdown(struct device *dev)
@@ -203,7 +244,6 @@
*/
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
- u32 pid, cid;
u32 size;
void __iomem *tmp;
int i, ret;
@@ -241,24 +281,34 @@
goto err_release;
}
- /*
- * Read pid and cid based on size of resource
- * they are located at end of region
- */
- for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
- for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
+ ret = amba_get_enable_pclk(dev);
+ if (ret == 0) {
+ u32 pid, cid;
+
+ /*
+ * Read pid and cid based on size of resource
+ * they are located at end of region
+ */
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) <<
+ (i * 8);
+ for (cid = 0, i = 0; i < 4; i++)
+ cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) <<
+ (i * 8);
+
+ amba_put_disable_pclk(dev);
+
+ if (cid == 0xb105f00d)
+ dev->periphid = pid;
+
+ if (!dev->periphid)
+ ret = -ENODEV;
+ }
iounmap(tmp);
- if (cid == 0xb105f00d)
- dev->periphid = pid;
-
- if (!dev->periphid) {
- ret = -ENODEV;
+ if (ret)
goto err_release;
- }
ret = device_add(&dev->dev);
if (ret)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9630fbd..9b9d3bd 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -673,7 +673,7 @@
*/
if (parent == NULL)
parent_kobj = virtual_device_parent(dev);
- else if (parent->class)
+ else if (parent->class && !dev->class->ns_type)
return &parent->kobj;
else
parent_kobj = &parent->kobj;
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9344216..a754715 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1216,17 +1216,20 @@
/* G33's GTT size defined in gmch_ctrl */
pci_read_config_word(agp_bridge->dev, I830_GMCH_CTRL, &gmch_ctrl);
- switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) {
- case G33_PGETBL_SIZE_1M:
+ switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
+ case I830_GMCH_GMS_STOLEN_512:
+ size = 512;
+ break;
+ case I830_GMCH_GMS_STOLEN_1024:
size = 1024;
break;
- case G33_PGETBL_SIZE_2M:
- size = 2048;
+ case I830_GMCH_GMS_STOLEN_8192:
+ size = 8*1024;
break;
default:
dev_info(&agp_bridge->dev->dev,
"unknown page table size 0x%x, assuming 512KB\n",
- (gmch_ctrl & G33_PGETBL_SIZE_MASK));
+ (gmch_ctrl & I830_GMCH_GMS_MASK));
size = 512;
}
} else {
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d64e3a..878ac0c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -493,7 +493,7 @@
sysrq_key_table[i] = op_p;
}
-static void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
{
struct sysrq_key_op *op_p;
int orig_log_level;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 24314a9..1030f84 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -623,7 +623,14 @@
static int tpm_tis_pnp_resume(struct pnp_dev *dev)
{
- return tpm_pm_resume(&dev->dev);
+ struct tpm_chip *chip = pnp_get_drvdata(dev);
+ int ret;
+
+ ret = tpm_pm_resume(&dev->dev);
+ if (!ret)
+ tpm_continue_selftest(chip);
+
+ return ret;
}
static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d7be69f13..b7dab32 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -194,6 +194,6 @@
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 063b218..938b74e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1077,6 +1077,7 @@
err_unlock_policy:
unlock_policy_rwsem_write(cpu);
+ free_cpumask_var(policy->related_cpus);
err_free_cpumask:
free_cpumask_var(policy->cpus);
err_free_policy:
@@ -1762,17 +1763,8 @@
dprintk("governor switch\n");
/* end old governor */
- if (data->governor) {
- /*
- * Need to release the rwsem around governor
- * stop due to lock dependency between
- * cancel_delayed_work_sync and the read lock
- * taken in the delayed work handler.
- */
- unlock_policy_rwsem_write(data->cpu);
+ if (data->governor)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- lock_policy_rwsem_write(data->cpu);
- }
/* start new governor */
data->governor = policy->governor;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 637c105..bd78acf 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1183,10 +1183,14 @@
/* Copy part of this segment */
ignore = skip - offset;
len = miter.length - ignore;
+ if (boffset + len > buflen)
+ len = buflen - boffset;
memcpy(buf + boffset, miter.addr + ignore, len);
} else {
- /* Copy all of this segment */
+ /* Copy all of this segment (up to buflen) */
len = miter.length;
+ if (boffset + len > buflen)
+ len = buflen - boffset;
memcpy(buf + boffset, miter.addr, len);
}
boffset += len;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index aedef79..0d2f9db 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -209,7 +209,7 @@
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
help
Support for error detection and correction on the Freescale
MPC8349, MPC8560, MPC8540, MPC8548
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index cc9357d..e0187d1 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1300,7 +1300,7 @@
if (devno == 0)
return -ENODEV;
- i7core_printk(KERN_ERR,
+ i7core_printk(KERN_INFO,
"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
dev_descr->dev, dev_descr->func,
PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 52ca09b..1052340 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -336,6 +336,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
static struct of_platform_driver mpc85xx_pci_err_driver = {
.probe = mpc85xx_pci_err_probe,
@@ -650,6 +651,7 @@
{ .compatible = "fsl,p2020-l2-cache-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
static struct of_platform_driver mpc85xx_l2_err_driver = {
.probe = mpc85xx_l2_err_probe,
@@ -1120,11 +1122,13 @@
{ .compatible = "fsl,mpc8555-memory-controller", },
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
+ { .compatible = "fsl,mpc8569-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
{ .compatible = "fsl,mpc8349-memory-controller", },
{ .compatible = "fsl,p2020-memory-controller", },
{},
};
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
static struct of_platform_driver mpc85xx_mc_err_driver = {
.probe = mpc85xx_mc_err_probe,
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index f73a155..e23c068 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -352,6 +352,6 @@
module_init(cs5535_gpio_init);
module_exit(cs5535_gpio_exit);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3ca3654..4e51fe3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -893,10 +893,12 @@
void gpio_unexport(unsigned gpio)
{
struct gpio_desc *desc;
- int status = -EINVAL;
+ int status = 0;
- if (!gpio_is_valid(gpio))
+ if (!gpio_is_valid(gpio)) {
+ status = -EINVAL;
goto done;
+ }
mutex_lock(&sysfs_lock);
@@ -911,7 +913,6 @@
clear_bit(FLAG_EXPORT, &desc->flags);
put_device(dev);
device_unregister(dev);
- status = 0;
} else
status = -ENODEV;
}
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index aee83fa..9214119 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -605,6 +605,9 @@
case FBC_NOT_TILED:
seq_printf(m, "scanout buffer not tiled");
break;
+ case FBC_MULTIPLE_PIPES:
+ seq_printf(m, "multiple pipes are enabled");
+ break;
default:
seq_printf(m, "unknown reason");
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f00c5ae..2305a12 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1300,7 +1300,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
drm_mm_put_block(dev_priv->compressed_fb);
- if (!IS_GM45(dev))
+ if (dev_priv->compressed_llb)
drm_mm_put_block(dev_priv->compressed_llb);
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d147ab2..2e1744d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -215,6 +215,7 @@
FBC_MODE_TOO_LARGE, /* mode too large for compression */
FBC_BAD_PLANE, /* fbc not supported on plane */
FBC_NOT_TILED, /* buffer not tiled */
+ FBC_MULTIPLE_PIPES, /* more than one pipe active */
};
enum intel_pch {
@@ -222,6 +223,8 @@
PCH_CPT, /* Cougarpoint PCH */
};
+#define QUIRK_PIPEA_FORCE (1<<0)
+
struct intel_fbdev;
typedef struct drm_i915_private {
@@ -337,6 +340,8 @@
/* PCH chipset type */
enum intel_pch pch_type;
+ unsigned long quirks;
+
/* Register state */
bool modeset_on_lid;
u8 saveLBB;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 0743858..5aa747f 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2241,6 +2241,7 @@
page = read_cache_page_gfp(mapping, i,
GFP_HIGHUSER |
__GFP_COLD |
+ __GFP_RECLAIMABLE |
gfpmask);
if (IS_ERR(page))
goto err_pages;
@@ -3646,6 +3647,7 @@
return ret;
}
+
int
i915_gem_do_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv,
@@ -3793,7 +3795,7 @@
unsigned long long total_size = 0;
int num_fences = 0;
for (i = 0; i < args->buffer_count; i++) {
- obj_priv = object_list[i]->driver_private;
+ obj_priv = to_intel_bo(object_list[i]);
total_size += object_list[i]->size;
num_fences +=
@@ -4741,6 +4743,16 @@
list_add(&dev_priv->mm.shrink_list, &shrink_list);
spin_unlock(&shrink_list_lock);
+ /* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+ if (IS_GEN3(dev)) {
+ u32 tmp = I915_READ(MI_ARB_STATE);
+ if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+ /* arb state is a masked write, so set bit + bit in mask */
+ tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+ I915_WRITE(MI_ARB_STATE, tmp);
+ }
+ }
+
/* Old X drivers will take 0-2 for front, back, depth buffers */
if (!drm_core_check_feature(dev, DRIVER_MODESET))
dev_priv->fence_reg_start = 3;
@@ -4977,7 +4989,7 @@
}
static int
-i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+i915_gem_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
drm_i915_private_t *dev_priv, *next_dev;
struct drm_i915_gem_object *obj_priv, *next_obj;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 150400f..cf41c67 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -359,6 +359,70 @@
#define LM_BURST_LENGTH 0x00000700
#define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */
+#define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ * fetches. This is not turned on by default
+ */
+#define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define MI_ARB_ISOCH_WAIT_GTT (1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define MI_ARB_BLOCK_GRANT_MASK (3 << 12)
+#define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */
+#define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */
+#define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */
+#define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define MI_ARB_TIME_SLICE_MASK (7 << 5)
+#define MI_ARB_TIME_SLICE_1 (0 << 5)
+#define MI_ARB_TIME_SLICE_2 (1 << 5)
+#define MI_ARB_TIME_SLICE_4 (2 << 5)
+#define MI_ARB_TIME_SLICE_6 (3 << 5)
+#define MI_ARB_TIME_SLICE_8 (4 << 5)
+#define MI_ARB_TIME_SLICE_10 (5 << 5)
+#define MI_ARB_TIME_SLICE_14 (6 << 5)
+#define MI_ARB_TIME_SLICE_16 (7 << 5)
+
+/* Low priority grace period page size */
+#define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */
+#define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4)
+
+/* Disable display A/B trickle feed */
+#define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2)
+
+/* Set display plane priority */
+#define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */
+#define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */
+
#define CACHE_MODE_0 0x02120 /* 915+ only */
#define CM0_MASK_SHIFT 16
#define CM0_IZ_OPT_DISABLE (1<<6)
@@ -2805,6 +2869,7 @@
#define PCH_PP_STATUS 0xc7200
#define PCH_PP_CONTROL 0xc7204
+#define PANEL_UNLOCK_REGS (0xabcd << 16)
#define EDP_FORCE_VDD (1 << 3)
#define EDP_BLC_ENABLE (1 << 2)
#define PANEL_POWER_RESET (1 << 1)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 68dcf36..5e21b31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -862,8 +862,8 @@
intel_clock_t clock;
int max_n;
bool found;
- /* approximately equals target * 0.00488 */
- int err_most = (target >> 8) + (target >> 10);
+ /* approximately equals target * 0.00585 */
+ int err_most = (target >> 8) + (target >> 9);
found = false;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -1180,8 +1180,12 @@
struct drm_framebuffer *fb = crtc->fb;
struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj_priv;
+ struct drm_crtc *tmp_crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int plane = intel_crtc->plane;
+ int crtcs_enabled = 0;
+
+ DRM_DEBUG_KMS("\n");
if (!i915_powersave)
return;
@@ -1199,10 +1203,21 @@
* If FBC is already on, we just have to verify that we can
* keep it that way...
* Need to disable if:
+ * - more than one pipe is active
* - changing FBC params (stride, fence, mode)
* - new fb is too large to fit in compressed buffer
* - going to an unsupported config (interlace, pixel multiply, etc.)
*/
+ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
+ if (tmp_crtc->enabled)
+ crtcs_enabled++;
+ }
+ DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
+ if (crtcs_enabled > 1) {
+ DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+ dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+ goto out_disable;
+ }
if (intel_fb->obj->size > dev_priv->cfb_size) {
DRM_DEBUG_KMS("framebuffer too large, disabling "
"compression\n");
@@ -1255,7 +1270,7 @@
}
}
-static int
+int
intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
@@ -2255,6 +2270,11 @@
intel_wait_for_vblank(dev);
}
+ /* Don't disable pipe A or pipe A PLLs if needed */
+ if (pipeconf_reg == PIPEACONF &&
+ (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ goto skip_pipe_off;
+
/* Next, disable display pipes */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) != 0) {
@@ -2270,7 +2290,7 @@
I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
}
-
+ skip_pipe_off:
/* Wait for the clocks to turn off. */
udelay(150);
break;
@@ -2356,8 +2376,6 @@
if (mode->clock * 3 > 27000 * 4)
return MODE_CLOCK_HIGH;
}
-
- drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}
@@ -3736,6 +3754,7 @@
if (dev_priv->lvds_dither) {
if (HAS_PCH_SPLIT(dev)) {
pipeconf |= PIPE_ENABLE_DITHER;
+ pipeconf &= ~PIPE_DITHER_TYPE_MASK;
pipeconf |= PIPE_DITHER_TYPE_ST01;
} else
lvds |= LVDS_ENABLE_DITHER;
@@ -4412,7 +4431,8 @@
DRM_DEBUG_DRIVER("upclocking LVDS\n");
/* Unlock panel regs */
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+ PANEL_UNLOCK_REGS);
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
@@ -4455,7 +4475,8 @@
DRM_DEBUG_DRIVER("downclocking LVDS\n");
/* Unlock panel regs */
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | (0xabcd << 16));
+ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+ PANEL_UNLOCK_REGS);
dpll |= DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
@@ -4695,7 +4716,7 @@
struct drm_gem_object *obj;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
- unsigned long flags;
+ unsigned long flags, offset;
int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
int ret, pipesrc;
u32 flip_mask;
@@ -4762,19 +4783,23 @@
while (I915_READ(ISR) & flip_mask)
;
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = obj_priv->gtt_offset;
+ offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8);
+
BEGIN_LP_RING(4);
if (IS_I965G(dev)) {
OUT_RING(MI_DISPLAY_FLIP |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
+ OUT_RING(offset | obj_priv->tiling_mode);
pipesrc = I915_READ(pipesrc_reg);
OUT_RING(pipesrc & 0x0fff0fff);
} else {
OUT_RING(MI_DISPLAY_FLIP_I915 |
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitch);
- OUT_RING(obj_priv->gtt_offset);
+ OUT_RING(offset);
OUT_RING(MI_NOOP);
}
ADVANCE_LP_RING();
@@ -5506,6 +5531,66 @@
}
}
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times. This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+ DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+}
+
+struct intel_quirk {
+ int device;
+ int subsystem_vendor;
+ int subsystem_device;
+ void (*hook)(struct drm_device *dev);
+};
+
+struct intel_quirk intel_quirks[] = {
+ /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
+ { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
+ /* HP Mini needs pipe A force quirk (LP: #322104) */
+ { 0x27ae,0x103c, 0x361a, quirk_pipea_force },
+
+ /* Thinkpad R31 needs pipe A force quirk */
+ { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+ /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+ { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+ /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+ { 0x3577, 0x1014, 0x0513, quirk_pipea_force },
+ /* ThinkPad X40 needs pipe A force quirk */
+
+ /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+ /* 855 & before need to leave pipe A & dpll A up */
+ { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+ { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+ struct pci_dev *d = dev->pdev;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
+ struct intel_quirk *q = &intel_quirks[i];
+
+ if (d->device == q->device &&
+ (d->subsystem_vendor == q->subsystem_vendor ||
+ q->subsystem_vendor == PCI_ANY_ID) &&
+ (d->subsystem_device == q->subsystem_device ||
+ q->subsystem_device == PCI_ANY_ID))
+ q->hook(dev);
+ }
+}
+
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5518,6 +5603,8 @@
dev->mode_config.funcs = (void *)&intel_mode_funcs;
+ intel_init_quirks(dev);
+
intel_init_display(dev);
if (IS_I965G(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1aac59e..5dde80f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -717,6 +717,51 @@
}
}
+static void ironlake_edp_panel_on (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+ u32 pp, pp_status;
+
+ pp_status = I915_READ(PCH_PP_STATUS);
+ if (pp_status & PP_ON)
+ return;
+
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ do {
+ pp_status = I915_READ(PCH_PP_STATUS);
+ } while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status);
+
+ pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD);
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void ironlake_edp_panel_off (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned long timeout = jiffies + msecs_to_jiffies(5000);
+ u32 pp, pp_status;
+
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~POWER_TARGET_ON;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+ do {
+ pp_status = I915_READ(PCH_PP_STATUS);
+ } while ((pp_status & PP_ON) && !time_after(jiffies, timeout));
+
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("panel off wait timed out\n");
+
+ /* Make sure VDD is enabled so DP AUX will work */
+ pp |= EDP_FORCE_VDD;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
static void ironlake_edp_backlight_on (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -751,14 +796,18 @@
if (mode != DRM_MODE_DPMS_ON) {
if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_encoder, dp_priv->DP);
- if (IS_eDP(intel_encoder))
+ if (IS_eDP(intel_encoder)) {
ironlake_edp_backlight_off(dev);
+ ironlake_edp_panel_off(dev);
+ }
}
} else {
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
- if (IS_eDP(intel_encoder))
+ if (IS_eDP(intel_encoder)) {
+ ironlake_edp_panel_on(dev);
ironlake_edp_backlight_on(dev);
+ }
}
}
dp_priv->dpms_mode = mode;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 72206f3..2f7970b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -215,6 +215,9 @@
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
+extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
+ struct drm_gem_object *obj);
+
extern int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd *mode_cmd,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index c3c5052..3e18c9e 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -98,7 +98,7 @@
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_pin(fbo, 64*1024);
+ ret = intel_pin_and_fence_fb_obj(dev, fbo);
if (ret) {
DRM_ERROR("failed to pin fb: %d\n", ret);
goto out_unref;
@@ -236,7 +236,7 @@
drm_framebuffer_cleanup(&ifb->base);
if (ifb->obj)
- drm_gem_object_unreference_unlocked(ifb->obj);
+ drm_gem_object_unreference(ifb->obj);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 31df55f..0eab8df 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -599,6 +599,26 @@
return 0;
}
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+ return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+ {
+ .callback = intel_no_modeset_on_lid_dmi_callback,
+ .ident = "Toshiba Tecra A11",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+ },
+ },
+
+ { } /* terminating entry */
+};
+
/*
* Lid events. Note the use of 'modeset_on_lid':
* - we set it on lid close, and reset it on open
@@ -622,6 +642,9 @@
*/
if (connector)
connector->status = connector->funcs->detect(connector);
+ /* Don't force modeset on machines where it causes a GPU lockup */
+ if (dmi_check_system(intel_no_modeset_on_lid))
+ return NOTIFY_OK;
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index fc924b6..e492919f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -203,36 +203,26 @@
const bool rw;
};
-static struct methods nv04_methods[] = {
- { "PROM", load_vbios_prom, false },
+static struct methods shadow_methods[] = {
{ "PRAMIN", load_vbios_pramin, true },
+ { "PROM", load_vbios_prom, false },
{ "PCIROM", load_vbios_pci, true },
-};
-
-static struct methods nv50_methods[] = {
{ "ACPI", load_vbios_acpi, true },
- { "PRAMIN", load_vbios_pramin, true },
- { "PROM", load_vbios_prom, false },
- { "PCIROM", load_vbios_pci, true },
};
-#define METHODCNT 3
-
static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- struct methods *methods;
- int i;
+ const int nr_methods = ARRAY_SIZE(shadow_methods);
+ struct methods *methods = shadow_methods;
int testscore = 3;
- int scores[METHODCNT];
+ int scores[nr_methods], i;
if (nouveau_vbios) {
- methods = nv04_methods;
- for (i = 0; i < METHODCNT; i++)
+ for (i = 0; i < nr_methods; i++)
if (!strcasecmp(nouveau_vbios, methods[i].desc))
break;
- if (i < METHODCNT) {
+ if (i < nr_methods) {
NV_INFO(dev, "Attempting to use BIOS image from %s\n",
methods[i].desc);
@@ -244,12 +234,7 @@
NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
}
- if (dev_priv->card_type < NV_50)
- methods = nv04_methods;
- else
- methods = nv50_methods;
-
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
methods[i].desc);
data[0] = data[1] = 0; /* avoid reuse of previous image */
@@ -260,7 +245,7 @@
}
while (--testscore > 0) {
- for (i = 0; i < METHODCNT; i++) {
+ for (i = 0; i < nr_methods; i++) {
if (scores[i] == testscore) {
NV_TRACE(dev, "Using BIOS image from %s\n",
methods[i].desc);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index c9a4a0d..257ea13 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -387,7 +387,8 @@
dev_priv->nfbdev = nfbdev;
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
- ret = drm_fb_helper_init(dev, &nfbdev->helper, 2, 4);
+ ret = drm_fb_helper_init(dev, &nfbdev->helper,
+ nv_two_heads(dev) ? 2 : 1, 4);
if (ret) {
kfree(nfbdev);
return ret;
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 010963d..345a75a 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -333,7 +333,6 @@
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -368,7 +367,6 @@
}
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 3970e62..a89a15a 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -1230,7 +1230,6 @@
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 5);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -1264,7 +1263,6 @@
ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
@@ -2354,6 +2352,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 7e81db5..19a7ef7 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -481,6 +481,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@@ -1176,6 +1177,8 @@
int r;
track = kzalloc(sizeof(*track), GFP_KERNEL);
+ if (track == NULL)
+ return -ENOMEM;
r100_cs_track_clear(p->rdev, track);
p->track = track;
do {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 34330df..694af7c 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -125,6 +125,7 @@
r520_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 3d6645c..e100f69 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1179,6 +1179,7 @@
if (rdev->flags & RADEON_IS_IGP)
base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
}
}
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index f4fb88e..ca5c29f 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -538,9 +538,12 @@
r600_prepare_blit_copy(struct drm_device *dev, struct drm_file *file_priv)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
+ int ret;
DRM_DEBUG("\n");
- r600_nomm_get_vb(dev);
+ ret = r600_nomm_get_vb(dev);
+ if (ret)
+ return ret;
dev_priv->blit_vb->file_priv = file_priv;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index c39c1bc..144c32d 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -585,7 +585,7 @@
header = radeon_get_ib_value(p, h_idx);
crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
reg = CP_PACKET0_GET_REG(header);
- mutex_lock(&p->rdev->ddev->mode_config.mutex);
+
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
DRM_ERROR("cannot find crtc %d\n", crtc_id);
@@ -620,7 +620,6 @@
ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
}
out:
- mutex_unlock(&p->rdev->ddev->mode_config.mutex);
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index ab61aaa..2f94dc6 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -351,6 +351,7 @@
int vram_mtrr;
bool vram_is_ddr;
bool igp_sideport_enabled;
+ u64 gtt_base_align;
};
bool radeon_combios_sideport_present(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 99bd8a9..10673ae 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -280,6 +280,15 @@
}
}
+ /* ASUS HD 3600 board lists the DVI port as HDMI */
+ if ((dev->pdev->device == 0x9598) &&
+ (dev->pdev->subsystem_vendor == 0x1043) &&
+ (dev->pdev->subsystem_device == 0x01e4)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_HDMIA) {
+ *connector_type = DRM_MODE_CONNECTOR_DVII;
+ }
+ }
+
/* ASUS HD 3450 board lists the DVI port as HDMI */
if ((dev->pdev->device == 0x95C5) &&
(dev->pdev->subsystem_vendor == 0x1043) &&
@@ -1029,8 +1038,15 @@
data_offset);
switch (crev) {
case 1:
- if (igp_info->info.ucMemoryType & 0xf0)
- return true;
+ /* AMD IGPS */
+ if ((rdev->family == CHIP_RS690) ||
+ (rdev->family == CHIP_RS740)) {
+ if (igp_info->info.ulBootUpMemoryClock)
+ return true;
+ } else {
+ if (igp_info->info.ucMemoryType & 0xf0)
+ return true;
+ }
break;
case 2:
if (igp_info->info_2.ucMemoryType & 0x0f)
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index d1c1d8d..2417d7b 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -3050,6 +3050,14 @@
rdev->pdev->subsystem_device == 0x308b)
return;
+ /* quirk for rs4xx HP dv5000 laptop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS480 &&
+ rdev->pdev->subsystem_vendor == 0x103c &&
+ rdev->pdev->subsystem_device == 0x30a4)
+ return;
+
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
if (table)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index f58f8bd..adccbc2 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -771,14 +771,14 @@
} else
ret = connector_status_connected;
- /* multiple connectors on the same encoder with the same ddc line
- * This tends to be HDMI and DVI on the same encoder with the
- * same ddc line. If the edid says HDMI, consider the HDMI port
- * connected and the DVI port disconnected. If the edid doesn't
- * say HDMI, vice versa.
+ /* This gets complicated. We have boards with VGA + HDMI with a
+ * shared DDC line and we have boards with DVI-D + HDMI with a shared
+ * DDC line. The latter is more complex because with DVI<->HDMI adapters
+ * you don't really know what's connected to which port as both are digital.
*/
if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct drm_connector *list_connector;
struct radeon_connector *list_radeon_connector;
list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) {
@@ -788,15 +788,10 @@
if (list_radeon_connector->shared_ddc &&
(list_radeon_connector->ddc_bus->rec.i2c_id ==
radeon_connector->ddc_bus->rec.i2c_id)) {
- if (drm_detect_hdmi_monitor(radeon_connector->edid)) {
- if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) {
- kfree(radeon_connector->edid);
- radeon_connector->edid = NULL;
- ret = connector_status_disconnected;
- }
- } else {
- if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
- (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+ /* cases where both connectors are digital */
+ if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) {
+ /* hpd is our only option in this case */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 5f31731..dd279da 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -226,20 +226,20 @@
{
u64 size_af, size_bf;
- size_af = 0xFFFFFFFF - mc->vram_end;
- size_bf = mc->vram_start;
+ size_af = ((0xFFFFFFFF - mc->vram_end) + mc->gtt_base_align) & ~mc->gtt_base_align;
+ size_bf = mc->vram_start & ~mc->gtt_base_align;
if (size_bf > size_af) {
if (mc->gtt_size > size_bf) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_bf;
}
- mc->gtt_start = mc->vram_start - mc->gtt_size;
+ mc->gtt_start = (mc->vram_start & ~mc->gtt_base_align) - mc->gtt_size;
} else {
if (mc->gtt_size > size_af) {
dev_warn(rdev->dev, "limiting GTT\n");
mc->gtt_size = size_af;
}
- mc->gtt_start = mc->vram_end + 1;
+ mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 6a70c0d..ab389f8 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -128,7 +128,8 @@
for (i = 0, found = 0; i < rdev->num_crtc; i++) {
crtc = (struct drm_crtc *)minfo->crtcs[i];
if (crtc && crtc->base.id == value) {
- value = i;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ value = radeon_crtc->crtc_id;
found = 1;
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index bad77f4..5688a0c 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -108,6 +108,7 @@
udelay(panel_pwr_delay * 1000);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+ udelay(panel_pwr_delay * 1000);
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index f2ed27c..0320403 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -642,8 +642,8 @@
}
flicker_removal = (tmp + 500) / 1000;
- if (flicker_removal < 2)
- flicker_removal = 2;
+ if (flicker_removal < 3)
+ flicker_removal = 3;
for (i = 0; i < ARRAY_SIZE(SLOPE_limit); ++i) {
if (flicker_removal == SLOPE_limit[i])
break;
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9e4240b..f454c9a 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -57,7 +57,9 @@
}
if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
/* FIXME: RS400 & RS480 seems to have issue with GART size
- * if 4G of system memory (needs more testing) */
+ * if 4G of system memory (needs more testing)
+ */
+ /* XXX is this still an issue with proper alignment? */
rdev->mc.gtt_size = 32 * 1024 * 1024;
DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
}
@@ -263,6 +265,7 @@
r100_vram_init_sizes(rdev);
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 7bb4c3e..6dc15ea 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -698,6 +698,7 @@
base = G_000004_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index f4f0a61..ce4ecbe 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -162,6 +162,7 @@
rs690_pm_info(rdev);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
+ rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7d9a7b0..0c9c169 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -195,6 +195,7 @@
rv515_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
+ rdev->mc.gtt_base_align = 0;
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index b1d67dc..ca90479 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -40,11 +40,13 @@
#include <linux/slab.h>
#include <asm/atomic.h>
-#include <asm/agp.h>
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_page_alloc.h"
+#ifdef TTM_HAS_AGP
+#include <asm/agp.h>
+#endif
#define NUM_PAGES_TO_ALLOC (PAGE_SIZE/sizeof(struct page *))
#define SMALL_ALLOCATION 16
@@ -392,7 +394,7 @@
/**
* Callback for mm to request pool to reduce number of page held.
*/
-static int ttm_pool_mm_shrink(int shrink_pages, gfp_t gfp_mask)
+static int ttm_pool_mm_shrink(struct shrinker *shrink, int shrink_pages, gfp_t gfp_mask)
{
static atomic_t start_pool = ATOMIC_INIT(0);
unsigned i;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index f1d6261..437ac78 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -972,6 +972,7 @@
ret = copy_from_user(rects, user_rects, rects_size);
if (unlikely(ret != 0)) {
DRM_ERROR("Failed to get rects.\n");
+ ret = -EFAULT;
goto out_free;
}
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index fbd62ab..0ffaf2c 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -89,7 +89,6 @@
struct gc {
struct pardevice *pd;
struct gc_pad pads[GC_MAX_DEVICES];
- struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
int pad_count[GC_MAX];
int used;
@@ -387,7 +386,7 @@
for (i = 0; i < GC_MAX_DEVICES; i++) {
pad = &gc->pads[i];
- dev = gc->dev[i];
+ dev = pad->dev;
s = gc_status_bit[i];
switch (pad->type) {
@@ -579,7 +578,7 @@
read = parport_read_status(port) ^ 0x80;
for (j = 0; j < GC_MAX_DEVICES; j++) {
- struct gc_pad *pad = &gc->pads[i];
+ struct gc_pad *pad = &gc->pads[j];
if (pad->type == GC_PSX || pad->type == GC_DDR)
data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3525f53..1ba2514 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -124,7 +124,7 @@
right-hand column will be interpreted as the key shown in the
left-hand column.
-config QT2160
+config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
depends on I2C && EXPERIMENTAL
help
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 7aa59e0..fb16b5e 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -51,8 +51,12 @@
*/
#define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */
#define TWL4030_MAX_COLS 8
-#define TWL4030_ROW_SHIFT 3
-#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS)
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT 4
+#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
struct twl4030_keypad {
unsigned short keymap[TWL4030_KEYMAP_SIZE];
@@ -182,7 +186,7 @@
return ret;
}
-static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
{
int i;
u16 check = 0;
@@ -191,12 +195,12 @@
u16 col = key_state[i];
if ((col & check) && hweight16(col) > 1)
- return 1;
+ return true;
check |= col;
}
- return 0;
+ return false;
}
static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
@@ -225,7 +229,8 @@
if (!changed)
continue;
- for (col = 0; col < kp->n_cols; col++) {
+ /* Extra column handles "all gnd" rows */
+ for (col = 0; col < kp->n_cols + 1; col++) {
int code;
if (!(changed & (1 << col)))
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 4ef764c..ee2bf6b 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -258,7 +258,7 @@
.probe = w90p910_keypad_probe,
.remove = __devexit_p(w90p910_keypad_remove),
.driver = {
- .name = "nuc900-keypad",
+ .name = "nuc900-kpi",
.owner = THIS_MODULE,
},
};
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 40cea33..705589d 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -141,8 +141,13 @@
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap = priv->ext_cap_0c = 0;
- if (!SYN_CAP_VALID(priv->capabilities))
+ /*
+ * Older firmwares had submodel ID fixed to 0x47
+ */
+ if (SYN_ID_FULL(priv->identity) < 0x705 &&
+ SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
return -1;
+ }
/*
* Unless capExtended is set the rest of the flags should be ignored
@@ -206,6 +211,7 @@
unsigned char max[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
+ return 0;
if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 7d4d5e1..b6aa7d2 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -47,7 +47,7 @@
#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3))
#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1))
#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0))
-#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
+#define SYN_CAP_SUBMODEL_ID(c) (((c) & 0x00ff00) >> 8)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
@@ -66,6 +66,7 @@
#define SYN_ID_MODEL(i) (((i) >> 4) & 0x0f)
#define SYN_ID_MAJOR(i) ((i) & 0x0f)
#define SYN_ID_MINOR(i) (((i) >> 16) & 0xff)
+#define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
#define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47)
/* synaptics special commands */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 81003c4..ed7ad74 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -170,6 +170,13 @@
},
},
{
+ /* Gigabyte Spring Peak - defines wrong chassis type */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+ },
+ },
+ {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index cc18265b..7a45d68 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -233,7 +233,7 @@
w90p910_ts->state = TS_IDLE;
spin_lock_init(&w90p910_ts->lock);
setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
- (unsigned long)&w90p910_ts);
+ (unsigned long)w90p910_ts);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 26386a9..9b089df 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -353,6 +353,16 @@
To compile this driver as a module, choose M here: the
module will be called vmware_balloon.
+config ARM_CHARLCD
+ bool "ARM Ltd. Character LCD Driver"
+ depends on PLAT_VERSATILE
+ help
+ This is a driver for the character LCD found on the ARM Ltd.
+ Versatile and RealView Platform Baseboards. It doesn't do
+ very much more than display the text "ARM Linux" on the first
+ line and the Linux version on the second line, but that's
+ still useful.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6ed06a1..67552d6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,3 +31,4 @@
obj-y += eeprom/
obj-y += cb710/
obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
+obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
new file mode 100644
index 0000000..9e3879e
--- /dev/null
+++ b/drivers/misc/arm-charlcd.c
@@ -0,0 +1,396 @@
+/*
+ * Driver for the on-board character LCD found on some ARM reference boards
+ * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it
+ * http://en.wikipedia.org/wiki/HD44780_Character_LCD
+ * Currently it will just display the text "ARM Linux" and the linux version
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <generated/utsrelease.h>
+
+#define DRIVERNAME "arm-charlcd"
+#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000))
+
+/* Offsets to registers */
+#define CHAR_COM 0x00U
+#define CHAR_DAT 0x04U
+#define CHAR_RD 0x08U
+#define CHAR_RAW 0x0CU
+#define CHAR_MASK 0x10U
+#define CHAR_STAT 0x14U
+
+#define CHAR_RAW_CLEAR 0x00000000U
+#define CHAR_RAW_VALID 0x00000100U
+
+/* Hitachi HD44780 display commands */
+#define HD_CLEAR 0x01U
+#define HD_HOME 0x02U
+#define HD_ENTRYMODE 0x04U
+#define HD_ENTRYMODE_INCREMENT 0x02U
+#define HD_ENTRYMODE_SHIFT 0x01U
+#define HD_DISPCTRL 0x08U
+#define HD_DISPCTRL_ON 0x04U
+#define HD_DISPCTRL_CURSOR_ON 0x02U
+#define HD_DISPCTRL_CURSOR_BLINK 0x01U
+#define HD_CRSR_SHIFT 0x10U
+#define HD_CRSR_SHIFT_DISPLAY 0x08U
+#define HD_CRSR_SHIFT_DISPLAY_RIGHT 0x04U
+#define HD_FUNCSET 0x20U
+#define HD_FUNCSET_8BIT 0x10U
+#define HD_FUNCSET_2_LINES 0x08U
+#define HD_FUNCSET_FONT_5X10 0x04U
+#define HD_SET_CGRAM 0x40U
+#define HD_SET_DDRAM 0x80U
+#define HD_BUSY_FLAG 0x80U
+
+/**
+ * @dev: a pointer back to containing device
+ * @phybase: the offset to the controller in physical memory
+ * @physize: the size of the physical page
+ * @virtbase: the offset to the controller in virtual memory
+ * @irq: reserved interrupt number
+ * @complete: completion structure for the last LCD command
+ */
+struct charlcd {
+ struct device *dev;
+ u32 phybase;
+ u32 physize;
+ void __iomem *virtbase;
+ int irq;
+ struct completion complete;
+ struct delayed_work init_work;
+};
+
+static irqreturn_t charlcd_interrupt(int irq, void *data)
+{
+ struct charlcd *lcd = data;
+ u8 status;
+
+ status = readl(lcd->virtbase + CHAR_STAT) & 0x01;
+ /* Clear IRQ */
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ if (status)
+ complete(&lcd->complete);
+ else
+ dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status);
+ return IRQ_HANDLED;
+}
+
+
+static void charlcd_wait_complete_irq(struct charlcd *lcd)
+{
+ int ret;
+
+ ret = wait_for_completion_interruptible_timeout(&lcd->complete,
+ CHARLCD_TIMEOUT);
+ /* Disable IRQ after completion */
+ writel(0x00, lcd->virtbase + CHAR_MASK);
+
+ if (ret < 0) {
+ dev_err(lcd->dev,
+ "wait_for_completion_interruptible_timeout() "
+ "returned %d waiting for ready\n", ret);
+ return;
+ }
+
+ if (ret == 0) {
+ dev_err(lcd->dev, "charlcd controller timed out "
+ "waiting for ready\n");
+ return;
+ }
+}
+
+static u8 charlcd_4bit_read_char(struct charlcd *lcd)
+{
+ u8 data;
+ u32 val;
+ int i;
+
+ /* If we can, use an IRQ to wait for the data, else poll */
+ if (lcd->irq >= 0)
+ charlcd_wait_complete_irq(lcd);
+ else {
+ i = 0;
+ val = 0;
+ while (!(val & CHAR_RAW_VALID) && i < 10) {
+ udelay(100);
+ val = readl(lcd->virtbase + CHAR_RAW);
+ i++;
+ }
+
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ }
+ msleep(1);
+
+ /* Read the 4 high bits of the data */
+ data = readl(lcd->virtbase + CHAR_RD) & 0xf0;
+
+ /*
+ * The second read for the low bits does not trigger an IRQ
+ * so in this case we have to poll for the 4 lower bits
+ */
+ i = 0;
+ val = 0;
+ while (!(val & CHAR_RAW_VALID) && i < 10) {
+ udelay(100);
+ val = readl(lcd->virtbase + CHAR_RAW);
+ i++;
+ }
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ msleep(1);
+
+ /* Read the 4 low bits of the data */
+ data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f;
+
+ return data;
+}
+
+static bool charlcd_4bit_read_bf(struct charlcd *lcd)
+{
+ if (lcd->irq >= 0) {
+ /*
+ * If we'll use IRQs to wait for the busyflag, clear any
+ * pending flag and enable IRQ
+ */
+ writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW);
+ init_completion(&lcd->complete);
+ writel(0x01, lcd->virtbase + CHAR_MASK);
+ }
+ readl(lcd->virtbase + CHAR_COM);
+ return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false;
+}
+
+static void charlcd_4bit_wait_busy(struct charlcd *lcd)
+{
+ int retries = 50;
+
+ udelay(100);
+ while (charlcd_4bit_read_bf(lcd) && retries)
+ retries--;
+ if (!retries)
+ dev_err(lcd->dev, "timeout waiting for busyflag\n");
+}
+
+static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd)
+{
+ u32 cmdlo = (cmd << 4) & 0xf0;
+ u32 cmdhi = (cmd & 0xf0);
+
+ writel(cmdhi, lcd->virtbase + CHAR_COM);
+ udelay(10);
+ writel(cmdlo, lcd->virtbase + CHAR_COM);
+ charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_char(struct charlcd *lcd, u8 ch)
+{
+ u32 chlo = (ch << 4) & 0xf0;
+ u32 chhi = (ch & 0xf0);
+
+ writel(chhi, lcd->virtbase + CHAR_DAT);
+ udelay(10);
+ writel(chlo, lcd->virtbase + CHAR_DAT);
+ charlcd_4bit_wait_busy(lcd);
+}
+
+static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str)
+{
+ u8 offset;
+ int i;
+
+ /*
+ * We support line 0, 1
+ * Line 1 runs from 0x00..0x27
+ * Line 2 runs from 0x28..0x4f
+ */
+ if (line == 0)
+ offset = 0;
+ else if (line == 1)
+ offset = 0x28;
+ else
+ return;
+
+ /* Set offset */
+ charlcd_4bit_command(lcd, HD_SET_DDRAM | offset);
+
+ /* Send string */
+ for (i = 0; i < strlen(str) && i < 0x28; i++)
+ charlcd_4bit_char(lcd, str[i]);
+}
+
+static void charlcd_4bit_init(struct charlcd *lcd)
+{
+ /* These commands cannot be checked with the busy flag */
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ msleep(5);
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ /* Go to 4bit mode */
+ writel(HD_FUNCSET, lcd->virtbase + CHAR_COM);
+ udelay(100);
+ /*
+ * 4bit mode, 2 lines, 5x8 font, after this the number of lines
+ * and the font cannot be changed until the next initialization sequence
+ */
+ charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES);
+ charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+ charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT);
+ charlcd_4bit_command(lcd, HD_CLEAR);
+ charlcd_4bit_command(lcd, HD_HOME);
+ /* Put something useful in the display */
+ charlcd_4bit_print(lcd, 0, "ARM Linux");
+ charlcd_4bit_print(lcd, 1, UTS_RELEASE);
+}
+
+static void charlcd_init_work(struct work_struct *work)
+{
+ struct charlcd *lcd =
+ container_of(work, struct charlcd, init_work.work);
+
+ charlcd_4bit_init(lcd);
+}
+
+static int __init charlcd_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct charlcd *lcd;
+ struct resource *res;
+
+ lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ lcd->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOENT;
+ goto out_no_resource;
+ }
+ lcd->phybase = res->start;
+ lcd->physize = resource_size(res);
+
+ if (request_mem_region(lcd->phybase, lcd->physize,
+ DRIVERNAME) == NULL) {
+ ret = -EBUSY;
+ goto out_no_memregion;
+ }
+
+ lcd->virtbase = ioremap(lcd->phybase, lcd->physize);
+ if (!lcd->virtbase) {
+ ret = -ENOMEM;
+ goto out_no_remap;
+ }
+
+ lcd->irq = platform_get_irq(pdev, 0);
+ /* If no IRQ is supplied, we'll survive without it */
+ if (lcd->irq >= 0) {
+ if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED,
+ DRIVERNAME, lcd)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+ }
+
+ platform_set_drvdata(pdev, lcd);
+
+ /*
+ * Initialize the display in a delayed work, because
+ * it is VERY slow and would slow down the boot of the system.
+ */
+ INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
+ schedule_delayed_work(&lcd->init_work, 0);
+
+ dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+ lcd->phybase);
+
+ return 0;
+
+out_no_irq:
+ iounmap(lcd->virtbase);
+out_no_remap:
+ platform_set_drvdata(pdev, NULL);
+out_no_memregion:
+ release_mem_region(lcd->phybase, SZ_4K);
+out_no_resource:
+ kfree(lcd);
+ return ret;
+}
+
+static int __exit charlcd_remove(struct platform_device *pdev)
+{
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ if (lcd) {
+ free_irq(lcd->irq, lcd);
+ iounmap(lcd->virtbase);
+ release_mem_region(lcd->phybase, lcd->physize);
+ platform_set_drvdata(pdev, NULL);
+ kfree(lcd);
+ }
+
+ return 0;
+}
+
+static int charlcd_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ /* Power the display off */
+ charlcd_4bit_command(lcd, HD_DISPCTRL);
+ return 0;
+}
+
+static int charlcd_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct charlcd *lcd = platform_get_drvdata(pdev);
+
+ /* Turn the display back on */
+ charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON);
+ return 0;
+}
+
+static const struct dev_pm_ops charlcd_pm_ops = {
+ .suspend = charlcd_suspend,
+ .resume = charlcd_resume,
+};
+
+static struct platform_driver charlcd_driver = {
+ .driver = {
+ .name = DRIVERNAME,
+ .owner = THIS_MODULE,
+ .pm = &charlcd_pm_ops,
+ },
+ .remove = __exit_p(charlcd_remove),
+};
+
+static int __init charlcd_init(void)
+{
+ return platform_driver_probe(&charlcd_driver, charlcd_probe);
+}
+
+static void __exit charlcd_exit(void)
+{
+ platform_driver_unregister(&charlcd_driver);
+}
+
+module_init(charlcd_init);
+module_exit(charlcd_exit);
+
+MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>");
+MODULE_DESCRIPTION("ARM Character LCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index 9bec24d..2d44b33 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -366,6 +366,6 @@
module_init(cs5535_mfgpt_init);
-MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
+MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index af21792..ad30f07 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -365,6 +365,26 @@
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_s3c *sc = sdhci_priv(host);
+ int ptr;
+
+ sdhci_remove_host(host, 1);
+
+ for (ptr = 0; ptr < 3; ptr++) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
+ clk_disable(sc->clk_io);
+ clk_put(sc->clk_io);
+
+ iounmap(host->ioaddr);
+ release_resource(sc->ioarea);
+ kfree(sc->ioarea);
+
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8bd2368..bb0872a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1062,6 +1062,10 @@
/* used to synchronize stats collecting */
int stats_state;
+
+ /* used for synchronization of concurrent threads statistics handling */
+ spinlock_t stats_lock;
+
/* used by dmae command loader */
struct dmae_command stats_dmae;
int executer_idx;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 57ff5b3..46167c0 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,8 +57,8 @@
#include "bnx2x_init_ops.h"
#include "bnx2x_dump.h"
-#define DRV_MODULE_VERSION "1.52.53-1"
-#define DRV_MODULE_RELDATE "2010/18/04"
+#define DRV_MODULE_VERSION "1.52.53-2"
+#define DRV_MODULE_RELDATE "2010/21/07"
#define BNX2X_BC_VER 0x040200
#include <linux/firmware.h>
@@ -3789,6 +3789,8 @@
struct eth_query_ramrod_data ramrod_data = {0};
int i, rc;
+ spin_lock_bh(&bp->stats_lock);
+
ramrod_data.drv_counter = bp->stats_counter++;
ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
for_each_queue(bp, i)
@@ -3802,6 +3804,8 @@
bp->spq_left++;
bp->stats_pending = 1;
}
+
+ spin_unlock_bh(&bp->stats_lock);
}
}
@@ -4367,6 +4371,14 @@
struct host_func_stats *fstats = bnx2x_sp(bp, func_stats);
struct bnx2x_eth_stats *estats = &bp->eth_stats;
int i;
+ u16 cur_stats_counter;
+
+ /* Make sure we use the value of the counter
+ * used for sending the last stats ramrod.
+ */
+ spin_lock_bh(&bp->stats_lock);
+ cur_stats_counter = bp->stats_counter - 1;
+ spin_unlock_bh(&bp->stats_lock);
memcpy(&(fstats->total_bytes_received_hi),
&(bnx2x_sp(bp, func_stats_base)->total_bytes_received_hi),
@@ -4394,25 +4406,22 @@
u32 diff;
/* are storm stats valid? */
- if ((u16)(le16_to_cpu(xclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(xclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by xstorm"
" xstorm counter (0x%x) != stats_counter (0x%x)\n",
- i, xclient->stats_counter, bp->stats_counter);
+ i, xclient->stats_counter, cur_stats_counter + 1);
return -1;
}
- if ((u16)(le16_to_cpu(tclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(tclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by tstorm"
" tstorm counter (0x%x) != stats_counter (0x%x)\n",
- i, tclient->stats_counter, bp->stats_counter);
+ i, tclient->stats_counter, cur_stats_counter + 1);
return -2;
}
- if ((u16)(le16_to_cpu(uclient->stats_counter) + 1) !=
- bp->stats_counter) {
+ if (le16_to_cpu(uclient->stats_counter) != cur_stats_counter) {
DP(BNX2X_MSG_STATS, "[%d] stats not updated by ustorm"
" ustorm counter (0x%x) != stats_counter (0x%x)\n",
- i, uclient->stats_counter, bp->stats_counter);
+ i, uclient->stats_counter, cur_stats_counter + 1);
return -4;
}
@@ -4849,16 +4858,18 @@
static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
{
- enum bnx2x_stats_state state = bp->stats_state;
+ enum bnx2x_stats_state state;
if (unlikely(bp->panic))
return;
- bnx2x_stats_stm[state][event].action(bp);
+ /* Protect a state change flow */
+ spin_lock_bh(&bp->stats_lock);
+ state = bp->stats_state;
bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+ spin_unlock_bh(&bp->stats_lock);
- /* Make sure the state has been "changed" */
- smp_wmb();
+ bnx2x_stats_stm[state][event].action(bp);
if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
@@ -9908,6 +9919,7 @@
mutex_init(&bp->port.phy_mutex);
mutex_init(&bp->fw_mb_mutex);
+ spin_lock_init(&bp->stats_lock);
#ifdef BCM_CNIC
mutex_init(&bp->cnic_mutex);
#endif
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index df48307..8d7dfd2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -822,7 +822,7 @@
/*initialize packet type*/
pk_type->type = cpu_to_be16(ETH_P_ARP);
- pk_type->dev = NULL;
+ pk_type->dev = bond->dev;
pk_type->func = rlb_arp_recv;
/* register to receive ARPs */
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 1d973db..d7de376 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1022,7 +1022,7 @@
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init dec_lance_probe(struct device *bdev, const int type)
+static int __devinit dec_lance_probe(struct device *bdev, const int type)
{
static unsigned version_printed;
static const char fmt[] = "declance%d";
@@ -1326,7 +1326,7 @@
}
#ifdef CONFIG_TC
-static int __init dec_lance_tc_probe(struct device *dev);
+static int __devinit dec_lance_tc_probe(struct device *dev);
static int __exit dec_lance_tc_remove(struct device *dev);
static const struct tc_device_id dec_lance_tc_table[] = {
@@ -1345,7 +1345,7 @@
},
};
-static int __init dec_lance_tc_probe(struct device *dev)
+static int __devinit dec_lance_tc_probe(struct device *dev)
{
int status = dec_lance_probe(dev, PMAD_LANCE);
if (!status)
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 7acb3ed..2602852 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -677,7 +677,7 @@
if (!adapter->pool_config)
netif_stop_queue(netdev);
- free_irq(netdev->irq, netdev);
+ h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
@@ -689,6 +689,8 @@
lpar_rc);
}
+ free_irq(netdev->irq, netdev);
+
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
ibmveth_cleanup(adapter);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3881918..cea37e0 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1722,6 +1722,15 @@
u16 eeprom_apme_mask = IGB_EEPROM_APME;
u32 part_num;
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
err = pci_enable_device_mem(pdev);
if (err)
return err;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7b5d976..74d9b6d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -6492,6 +6492,15 @@
#endif
u32 part_num, eec;
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
err = pci_enable_device_mem(pdev);
if (err)
return err;
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 87e8d4c..f15fe2cf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -499,7 +499,7 @@
.ndo_validate_addr = eth_validate_addr,
};
-static void macvlan_setup(struct net_device *dev)
+void macvlan_common_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -508,6 +508,12 @@
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
dev->ethtool_ops = &macvlan_ethtool_ops;
+}
+EXPORT_SYMBOL_GPL(macvlan_common_setup);
+
+static void macvlan_setup(struct net_device *dev)
+{
+ macvlan_common_setup(dev);
dev->tx_queue_len = 0;
}
@@ -705,7 +711,6 @@
/* common fields */
ops->priv_size = sizeof(struct macvlan_dev);
ops->get_tx_queues = macvlan_get_tx_queues;
- ops->setup = macvlan_setup;
ops->validate = macvlan_validate;
ops->maxtype = IFLA_MACVLAN_MAX;
ops->policy = macvlan_policy;
@@ -719,6 +724,7 @@
static struct rtnl_link_ops macvlan_link_ops = {
.kind = "macvlan",
+ .setup = macvlan_setup,
.newlink = macvlan_newlink,
.dellink = macvlan_dellink,
};
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index a8a94e2..ff02b83 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -180,11 +180,18 @@
{
struct macvtap_queue *q = macvtap_get_queue(dev, skb);
if (!q)
- return -ENOLINK;
+ goto drop;
+
+ if (skb_queue_len(&q->sk.sk_receive_queue) >= dev->tx_queue_len)
+ goto drop;
skb_queue_tail(&q->sk.sk_receive_queue, skb);
wake_up_interruptible_poll(sk_sleep(&q->sk), POLLIN | POLLRDNORM | POLLRDBAND);
- return 0;
+ return NET_RX_SUCCESS;
+
+drop:
+ kfree_skb(skb);
+ return NET_RX_DROP;
}
/*
@@ -235,8 +242,15 @@
macvlan_dellink(dev, head);
}
+static void macvtap_setup(struct net_device *dev)
+{
+ macvlan_common_setup(dev);
+ dev->tx_queue_len = TUN_READQ_SIZE;
+}
+
static struct rtnl_link_ops macvtap_link_ops __read_mostly = {
.kind = "macvtap",
+ .setup = macvtap_setup,
.newlink = macvtap_newlink,
.dellink = macvtap_dellink,
};
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5b3dfb4..33525bf 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1168,6 +1168,7 @@
int interrupts, nr_serviced = 0, i;
struct ei_device *ei_local;
int handled = 0;
+ unsigned long flags;
e8390_base = dev->base_addr;
ei_local = netdev_priv(dev);
@@ -1176,7 +1177,7 @@
* Protect the irq test too.
*/
- spin_lock(&ei_local->page_lock);
+ spin_lock_irqsave(&ei_local->page_lock, flags);
if (ei_local->irqlock)
{
@@ -1188,7 +1189,7 @@
dev->name, inb_p(e8390_base + EN0_ISR),
inb_p(e8390_base + EN0_IMR));
#endif
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_NONE;
}
@@ -1261,7 +1262,7 @@
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
- spin_unlock(&ei_local->page_lock);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
return IRQ_RETVAL(handled);
}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 96b6cfb..cdc6a5c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1316,7 +1316,7 @@
{ 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
/* 8168C family. */
- { 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
+ { 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 },
{ 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
{ 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
{ 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 5e52c75..7f3a53d 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -65,7 +65,7 @@
/* DEBUG message print. */
#define DBG_PRINT(dbg_level, fmt, args...) do { \
- if (dbg_level >= debug_level) \
+ if (dbg_level <= debug_level) \
pr_info(fmt, ##args); \
} while (0)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 6ad6fe7..6304259 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -736,8 +736,18 @@
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
else if (sinfo->gso_type & SKB_GSO_UDP)
gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
- else
- BUG();
+ else {
+ printk(KERN_ERR "tun: unexpected GSO type: "
+ "0x%x, gso_size %d, hdr_len %d\n",
+ sinfo->gso_type, gso.gso_size,
+ gso.hdr_len);
+ print_hex_dump(KERN_ERR, "tun: ",
+ DUMP_PREFIX_NONE,
+ 16, 1, skb->head,
+ min((int)gso.hdr_len, 64), true);
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+ }
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
} else
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 2d7c96d..eb80243 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -152,6 +152,7 @@
/* Device IDs */
USB_DEVICE_ID_I6050 = 0x0186,
USB_DEVICE_ID_I6050_2 = 0x0188,
+ USB_DEVICE_ID_I6250 = 0x0187,
};
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 0d5081d..d3365ac 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -491,6 +491,7 @@
switch (id->idProduct) {
case USB_DEVICE_ID_I6050:
case USB_DEVICE_ID_I6050_2:
+ case USB_DEVICE_ID_I6250:
i2400mu->i6050 = 1;
break;
default:
@@ -739,6 +740,7 @@
struct usb_device_id i2400mu_id_table[] = {
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
+ { USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
{ USB_DEVICE(0x8086, 0x0181) },
{ USB_DEVICE(0x8086, 0x1403) },
{ USB_DEVICE(0x8086, 0x1405) },
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 77b3591..23c15aa 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -730,13 +730,17 @@
/* RX */
if (ath9k_hif_usb_alloc_rx_urbs(hif_dev) < 0)
- goto err;
+ goto err_rx;
/* Register Read */
if (ath9k_hif_usb_alloc_reg_in_urb(hif_dev) < 0)
- goto err;
+ goto err_reg;
return 0;
+err_reg:
+ ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
+err_rx:
+ ath9k_hif_usb_dealloc_tx_urbs(hif_dev);
err:
return -ENOMEM;
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ca6065b..e3e5291 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -844,9 +844,9 @@
int dma_type;
if (edma)
- dma_type = DMA_FROM_DEVICE;
- else
dma_type = DMA_BIDIRECTIONAL;
+ else
+ dma_type = DMA_FROM_DEVICE;
qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
spin_lock_bh(&sc->rx.rxbuflock);
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index d24dc7d..972a9c3 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -330,6 +330,7 @@
dev->irq = pdev->irq;
hw_priv->mem_start = mem;
+ dev->base_addr = (unsigned long) mem;
prism2_pci_cor_sreset(local);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index c2a453a..dc43ebd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -97,6 +97,17 @@
spin_lock_irqsave(&priv->sta_lock, flags);
memset(priv->stations, 0, sizeof(priv->stations));
priv->num_stations = 0;
+
+ /*
+ * Remove all key information that is not stored as part of station
+ * information since mac80211 may not have had a
+ * chance to remove all the keys. When device is reconfigured by
+ * mac80211 after an error all keys will be reconfigured.
+ */
+ priv->ucode_key_table = 0;
+ priv->key_mapping_key = 0;
+ memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3ae468c..f20d3ee 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -854,6 +854,11 @@
BIT(NL80211_IFTYPE_WDS);
/*
+ * Initialize configuration work.
+ */
+ INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+
+ /*
* Let the driver probe the device to detect the capabilities.
*/
retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
@@ -863,11 +868,6 @@
}
/*
- * Initialize configuration work.
- */
- INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
-
- /*
* Allocate queue array.
*/
retval = rt2x00queue_allocate(rt2x00dev);
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 92379e2..2aaa131 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -156,6 +156,38 @@
pcibios_align_resource, dev);
}
+ if (ret < 0 && dev->fw_addr[resno]) {
+ struct resource *root, *conflict;
+ resource_size_t start, end;
+
+ /*
+ * If we failed to assign anything, let's try the address
+ * where firmware left it. That at least has a chance of
+ * working, which is better than just leaving it disabled.
+ */
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ else
+ root = &iomem_resource;
+
+ start = res->start;
+ end = res->end;
+ res->start = dev->fw_addr[resno];
+ res->end = res->start + size - 1;
+ dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
+ resno, res);
+ conflict = request_resource_conflict(root, res);
+ if (conflict) {
+ dev_info(&dev->dev,
+ "BAR %d: %pR conflicts with %s %pR\n", resno,
+ res, conflict->name, conflict);
+ res->start = start;
+ res->end = end;
+ } else
+ ret = 0;
+ }
+
if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 29f91fa..a4cd9ad 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -857,8 +857,10 @@
{
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev, &p_dev->io);
- if (p_dev->_irq)
+ if (p_dev->_irq) {
free_irq(p_dev->irq, p_dev->priv);
+ p_dev->_irq = 0;
+ }
if (p_dev->win)
pcmcia_release_window(p_dev, p_dev->win);
}
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index df4532e..f370476 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -178,7 +178,6 @@
unsigned long val,
struct cpufreq_freqs *freqs)
{
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
switch (val) {
case CPUFREQ_PRECHANGE:
if (freqs->new > freqs->old) {
@@ -186,7 +185,7 @@
"pre-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ pxa2xx_pcmcia_set_timing(skt);
}
break;
@@ -196,7 +195,7 @@
"post-updating\n",
freqs->new / 1000, (freqs->new / 100) % 10,
freqs->old / 1000, (freqs->old / 100) % 10);
- pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+ pxa2xx_pcmcia_set_timing(skt);
}
break;
}
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 40658e33..bb2f1fb 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -489,7 +489,7 @@
mutex_unlock(&ipclock);
return -ENODEV;
}
- ipc_command(cmd << 12 | sub);
+ ipc_command(sub << 12 | cmd);
err = busy_loop();
mutex_unlock(&ipclock);
return err;
@@ -501,9 +501,9 @@
* @cmd: command
* @sub: sub type
* @in: input data
- * @inlen: input length
+ * @inlen: input length in dwords
* @out: output data
- * @outlein: output length
+ * @outlein: output length in dwords
*
* Issue a command to the SCU which involves data transfers. Do the
* data copies under the lock but leave it for the caller to interpret
@@ -524,7 +524,7 @@
for (i = 0; i < inlen; i++)
ipc_data_writel(*in++, 4 * i);
- ipc_command((cmd << 12) | sub | (inlen << 18));
+ ipc_command((sub << 12) | cmd | (inlen << 18));
err = busy_loop();
for (i = 0; i < outlen; i++)
@@ -556,6 +556,10 @@
u32 cmd = 0;
mutex_lock(&ipclock);
+ if (ipcdev.pdev == NULL) {
+ mutex_unlock(&ipclock);
+ return -ENODEV;
+ }
cmd = (addr >> 24) & 0xFF;
if (cmd == IPC_I2C_READ) {
writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index d762a0c..84d3c43 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -43,10 +43,9 @@
struct ds278x_info;
struct ds278x_battery_ops {
- int (*get_current)(struct ds278x_info *info, int *current_uA);
- int (*get_voltage)(struct ds278x_info *info, int *voltage_uA);
- int (*get_capacity)(struct ds278x_info *info, int *capacity_uA);
-
+ int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+ int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA);
+ int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA);
};
#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
@@ -163,7 +162,7 @@
if (err)
return err;
*capacity = raw;
- return raw;
+ return 0;
}
static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
@@ -213,11 +212,11 @@
int current_uA;
int capacity;
- err = info->ops->get_current(info, ¤t_uA);
+ err = info->ops->get_battery_current(info, ¤t_uA);
if (err)
return err;
- err = info->ops->get_capacity(info, &capacity);
+ err = info->ops->get_battery_capacity(info, &capacity);
if (err)
return err;
@@ -246,15 +245,15 @@
break;
case POWER_SUPPLY_PROP_CAPACITY:
- ret = info->ops->get_capacity(info, &val->intval);
+ ret = info->ops->get_battery_capacity(info, &val->intval);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- ret = info->ops->get_voltage(info, &val->intval);
+ ret = info->ops->get_battery_voltage(info, &val->intval);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- ret = info->ops->get_current(info, &val->intval);
+ ret = info->ops->get_battery_current(info, &val->intval);
break;
case POWER_SUPPLY_PROP_TEMP:
@@ -307,14 +306,14 @@
static struct ds278x_battery_ops ds278x_ops[] = {
[DS2782] = {
- .get_current = ds2782_get_current,
- .get_voltage = ds2782_get_voltage,
- .get_capacity = ds2782_get_capacity,
+ .get_battery_current = ds2782_get_current,
+ .get_battery_voltage = ds2782_get_voltage,
+ .get_battery_capacity = ds2782_get_capacity,
},
[DS2786] = {
- .get_current = ds2786_get_current,
- .get_voltage = ds2786_get_voltage,
- .get_capacity = ds2786_get_capacity,
+ .get_battery_current = ds2786_get_current,
+ .get_battery_voltage = ds2786_get_voltage,
+ .get_battery_capacity = ds2786_get_capacity,
}
};
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 7b14a67..1179099 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -286,7 +286,7 @@
{
struct ab3100_regulator *abreg = reg->reg_data;
- if (selector > abreg->voltages_len)
+ if (selector >= abreg->voltages_len)
return -EINVAL;
return abreg->typ_voltages[selector];
}
@@ -318,7 +318,7 @@
regval &= 0xE0;
regval >>= 5;
- if (regval > abreg->voltages_len) {
+ if (regval >= abreg->voltages_len) {
dev_err(®->dev,
"regulator register %02x contains an illegal voltage setting\n",
abreg->regreg);
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 14b45762..8152d65 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/mfd/tps6507x.h>
@@ -101,9 +102,12 @@
unsigned max_uV;
u8 table_len;
const u16 *table;
+
+ /* Does DCDC high or the low register defines output voltage? */
+ bool defdcdc_default;
};
-static const struct tps_info tps6507x_pmic_regs[] = {
+static struct tps_info tps6507x_pmic_regs[] = {
{
.name = "VDCDC1",
.min_uV = 725000,
@@ -145,7 +149,7 @@
struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
struct tps6507x_dev *mfd;
struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
- const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+ struct tps_info *info[TPS6507X_NUM_REGULATOR];
struct mutex io_lock;
};
static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
@@ -341,10 +345,16 @@
reg = TPS6507X_REG_DEFDCDC1;
break;
case TPS6507X_DCDC_2:
- reg = TPS6507X_REG_DEFDCDC2_LOW;
+ if (tps->info[dcdc]->defdcdc_default)
+ reg = TPS6507X_REG_DEFDCDC2_HIGH;
+ else
+ reg = TPS6507X_REG_DEFDCDC2_LOW;
break;
case TPS6507X_DCDC_3:
- reg = TPS6507X_REG_DEFDCDC3_LOW;
+ if (tps->info[dcdc]->defdcdc_default)
+ reg = TPS6507X_REG_DEFDCDC3_HIGH;
+ else
+ reg = TPS6507X_REG_DEFDCDC3_LOW;
break;
default:
return -EINVAL;
@@ -370,10 +380,16 @@
reg = TPS6507X_REG_DEFDCDC1;
break;
case TPS6507X_DCDC_2:
- reg = TPS6507X_REG_DEFDCDC2_LOW;
+ if (tps->info[dcdc]->defdcdc_default)
+ reg = TPS6507X_REG_DEFDCDC2_HIGH;
+ else
+ reg = TPS6507X_REG_DEFDCDC2_LOW;
break;
case TPS6507X_DCDC_3:
- reg = TPS6507X_REG_DEFDCDC3_LOW;
+ if (tps->info[dcdc]->defdcdc_default)
+ reg = TPS6507X_REG_DEFDCDC3_HIGH;
+ else
+ reg = TPS6507X_REG_DEFDCDC3_LOW;
break;
default:
return -EINVAL;
@@ -532,7 +548,7 @@
{
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
static int desc_id;
- const struct tps_info *info = &tps6507x_pmic_regs[0];
+ struct tps_info *info = &tps6507x_pmic_regs[0];
struct regulator_init_data *init_data;
struct regulator_dev *rdev;
struct tps6507x_pmic *tps;
@@ -569,6 +585,12 @@
for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
/* Register the regulators */
tps->info[i] = info;
+ if (init_data->driver_data) {
+ struct tps6507x_reg_platform_data *data =
+ init_data->driver_data;
+ tps->info[i]->defdcdc_default = data->defdcdc_default;
+ }
+
tps->desc[i].name = info->name;
tps->desc[i].id = desc_id++;
tps->desc[i].n_voltages = num_voltages[i];
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 723cd1f..0e6ed7d 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1495,7 +1495,7 @@
if (ret != 0) {
dev_err(wm8350->dev, "Failed to register regulator %d: %d\n",
reg, ret);
- platform_device_del(pdev);
+ platform_device_put(pdev);
wm8350->pmic.pdev[reg] = NULL;
}
diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c
index 9718aaa..600b890 100644
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@@ -168,7 +168,7 @@
return -EIO;
}
- err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
(data | RX8581_CTRL_STOP));
if (err < 0) {
dev_err(&client->dev, "Unable to write control register\n");
@@ -182,6 +182,20 @@
return -EIO;
}
+ /* get VLF and clear it */
+ data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read flag register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
+ (data & ~(RX8581_FLAG_VLF)));
+ if (err != 0) {
+ dev_err(&client->dev, "Unable to write flag register\n");
+ return -EIO;
+ }
+
/* Restart the clock */
data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL);
if (data < 0) {
@@ -189,8 +203,8 @@
return -EIO;
}
- err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG,
- (data | ~(RX8581_CTRL_STOP)));
+ err = i2c_smbus_write_byte_data(client, RX8581_REG_CTRL,
+ (data & ~(RX8581_CTRL_STOP)));
if (err != 0) {
dev_err(&client->dev, "Unable to write control register\n");
return -EIO;
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 34d51dd..bed7b46 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -948,8 +948,10 @@
if (device->discipline && device->discipline->get_uid &&
!device->discipline->get_uid(device, &uid)) {
if (uid.type == UA_BASE_PAV_ALIAS ||
- uid.type == UA_HYPER_PAV_ALIAS)
+ uid.type == UA_HYPER_PAV_ALIAS) {
+ dasd_put_device(device);
return sprintf(buf, "1\n");
+ }
}
dasd_put_device(device);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index ce7cb87..407d0e9 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -713,7 +713,7 @@
ret = chsc_determine_channel_path_desc(chpid, 0, 0, 0, 0, chsc_resp);
if (ret)
goto out_free;
- memcpy(desc, &chsc_resp->data, chsc_resp->length);
+ memcpy(desc, &chsc_resp->data, sizeof(*desc));
out_free:
kfree(chsc_resp);
return ret;
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index e3dbeda..fd068bc 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -714,6 +714,14 @@
if (zfcp_erp_adapter_strategy_open_fsf_xport(act) == ZFCP_ERP_FAILED)
return ZFCP_ERP_FAILED;
+ if (mempool_resize(act->adapter->pool.status_read_data,
+ act->adapter->stat_read_buf_num, GFP_KERNEL))
+ return ZFCP_ERP_FAILED;
+
+ if (mempool_resize(act->adapter->pool.status_read_req,
+ act->adapter->stat_read_buf_num, GFP_KERNEL))
+ return ZFCP_ERP_FAILED;
+
atomic_set(&act->adapter->stat_miss, act->adapter->stat_read_buf_num);
if (zfcp_status_read_refill(act->adapter))
return ZFCP_ERP_FAILED;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 9ac6a6e..71663fb 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -496,7 +496,8 @@
adapter->hydra_version = bottom->adapter_type;
adapter->timer_ticks = bottom->timer_interval;
- adapter->stat_read_buf_num = max(bottom->status_read_buf_num, (u16)16);
+ adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
+ (u16)FSF_STATUS_READS_RECOM);
if (fc_host_permanent_port_name(shost) == -1)
fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
@@ -719,11 +720,6 @@
zfcp_qdio_req_init(adapter->qdio, &req->qdio_req, req->req_id, sbtype,
req->qtcb, sizeof(struct fsf_qtcb));
- if (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP)) {
- zfcp_fsf_req_free(req);
- return ERR_PTR(-EIO);
- }
-
return req;
}
@@ -981,7 +977,7 @@
}
/* use single, unchained SBAL if it can hold the request */
- if (zfcp_qdio_sg_one_sbale(sg_req) || zfcp_qdio_sg_one_sbale(sg_resp)) {
+ if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp)) {
zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req,
sg_req, sg_resp);
return 0;
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 28117e1..6fa5e04 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -251,7 +251,8 @@
struct zfcp_qdio_queue *req_q = &qdio->req_q;
spin_lock_bh(&qdio->req_q_lock);
- if (atomic_read(&req_q->count))
+ if (atomic_read(&req_q->count) ||
+ !(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
return 1;
spin_unlock_bh(&qdio->req_q_lock);
return 0;
@@ -274,8 +275,13 @@
spin_unlock_bh(&qdio->req_q_lock);
ret = wait_event_interruptible_timeout(qdio->req_q_wq,
zfcp_qdio_sbal_check(qdio), 5 * HZ);
+
+ if (!(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
+ return -EIO;
+
if (ret > 0)
return 0;
+
if (!ret) {
atomic_inc(&qdio->req_q_full);
/* assume hanging outbound queue, try queue recovery */
@@ -375,6 +381,8 @@
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
spin_unlock_bh(&qdio->req_q_lock);
+ wake_up(&qdio->req_q_wq);
+
qdio_shutdown(qdio->adapter->ccw_device,
QDIO_FLAG_CLEANUP_USING_CLEAR);
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index d53e62a..aacbe14 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -554,7 +554,7 @@
static int openprom_bsd_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
void __user *argp = (void __user *)arg;
int err;
@@ -601,7 +601,7 @@
static long openprom_ioctl(struct file * file,
unsigned int cmd, unsigned long arg)
{
- DATA *data = (DATA *) file->private_data;
+ DATA *data = file->private_data;
switch (cmd) {
case OPROMGETOPT:
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index a864ccc..989b9a8 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -277,6 +277,12 @@
goto reg_crq_failed;
}
+ queue->cur = 0;
+ spin_lock_init(&queue->lock);
+
+ tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
+ (unsigned long)hostdata);
+
if (request_irq(vdev->irq,
rpavscsi_handle_event,
0, "ibmvscsi", (void *)hostdata) != 0) {
@@ -291,15 +297,10 @@
goto req_irq_failed;
}
- queue->cur = 0;
- spin_lock_init(&queue->lock);
-
- tasklet_init(&hostdata->srp_task, (void *)rpavscsi_task,
- (unsigned long)hostdata);
-
return retrc;
req_irq_failed:
+ tasklet_kill(&hostdata->srp_task);
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 82ea4a8..f820cff 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1129,20 +1129,22 @@
}
/**
- * ipr_format_resource_path - Format the resource path for printing.
+ * ipr_format_res_path - Format the resource path for printing.
* @res_path: resource path
* @buf: buffer
*
* Return value:
* pointer to buffer
**/
-static char *ipr_format_resource_path(u8 *res_path, char *buffer)
+static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
{
int i;
+ char *p = buffer;
- sprintf(buffer, "%02X", res_path[0]);
- for (i=1; res_path[i] != 0xff; i++)
- sprintf(buffer, "%s-%02X", buffer, res_path[i]);
+ res_path[0] = '\0';
+ p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+ for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
+ p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
return buffer;
}
@@ -1187,7 +1189,8 @@
if (res->sdev && new_path)
sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
} else {
res->flags = cfgtew->u.cfgte->flags;
if (res->flags & IPR_IS_IOA_RESOURCE)
@@ -1573,7 +1576,8 @@
ipr_err_separator;
ipr_err("Device %d : %s", i + 1,
- ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
+ ipr_format_res_path(dev_entry->res_path, buffer,
+ sizeof(buffer)));
ipr_log_ext_vpd(&dev_entry->vpd);
ipr_err("-----New Device Information-----\n");
@@ -1919,13 +1923,14 @@
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
path_active_desc[i].desc, path_state_desc[j].desc,
- ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+ ipr_format_res_path(fabric->res_path, buffer,
+ sizeof(buffer)));
return;
}
}
ipr_err("Path state=%02X Resource Path=%s\n", path_state,
- ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+ ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
}
static const struct {
@@ -2066,7 +2071,8 @@
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
path_status_desc[j].desc, path_type_desc[i].desc,
- ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+ ipr_format_res_path(cfg->res_path, buffer,
+ sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
return;
@@ -2074,7 +2080,7 @@
}
ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
"WWN=%08X%08X\n", cfg->type_status,
- ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+ ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
}
@@ -2139,7 +2145,7 @@
ipr_err("RAID %s Array Configuration: %s\n",
error->protection_level,
- ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
+ ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
ipr_err_separator;
@@ -2160,9 +2166,11 @@
ipr_err("Array Member %d:\n", i);
ipr_log_ext_vpd(&array_entry->vpd);
ipr_err("Current Location: %s",
- ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
+ ipr_format_res_path(array_entry->res_path, buffer,
+ sizeof(buffer)));
ipr_err("Expected Location: %s",
- ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
+ ipr_format_res_path(array_entry->expected_res_path,
+ buffer, sizeof(buffer)));
ipr_err_separator;
}
@@ -4079,7 +4087,8 @@
};
/**
- * ipr_show_resource_path - Show the resource path for this device.
+ * ipr_show_resource_path - Show the resource path or the resource address for
+ * this device.
* @dev: device struct
* @buf: buffer
*
@@ -4097,9 +4106,14 @@
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
- if (res)
+ if (res && ioa_cfg->sis64)
len = snprintf(buf, PAGE_SIZE, "%s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
+ else if (res)
+ len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
+ res->bus, res->target, res->lun);
+
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
@@ -4351,7 +4365,8 @@
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
if (ioa_cfg->sis64)
sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 9ecd225..b965f35 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1684,8 +1684,9 @@
if (ipr_is_device(hostrcb)) { \
if ((hostrcb)->ioa_cfg->sis64) { \
printk(KERN_ERR IPR_NAME ": %s: " fmt, \
- ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
- &hostrcb->rp_buffer[0]), \
+ ipr_format_res_path(hostrcb->hcam.u.error64.fd_res_path, \
+ hostrcb->rp_buffer, \
+ sizeof(hostrcb->rp_buffer)), \
__VA_ARGS__); \
} else { \
ipr_ra_err((hostrcb)->ioa_cfg, \
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d..a182def 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -41,6 +41,7 @@
#include <linux/uaccess.h>
#include <asm/io.h>
+#include <asm/ioctls.h>
#include <asm/mach/serial_at91.h>
#include <mach/board.h>
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958..544f2e2 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@
con->index = line;
drv->cons = con;
- add_preferred_console(con->name, line, NULL);
+
+ if (!console_set_on_cmdline)
+ add_preferred_console(con->name, line, NULL);
return 1;
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c..ffbf455 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@
static int __devexit su_remove(struct of_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+ bool kbdms = false;
if (up->su_type == SU_PORT_MS ||
- up->su_type == SU_PORT_KBD) {
+ up->su_type == SU_PORT_KBD)
+ kbdms = true;
+
+ if (kbdms) {
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- kfree(up);
- } else if (up->port.type != PORT_UNKNOWN) {
+ } else if (up->port.type != PORT_UNKNOWN)
uart_remove_one_port(&sunsu_reg, &up->port);
- }
if (up->port.membase)
of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+ if (kbdms)
+ kfree(up);
+
dev_set_drvdata(&op->dev, NULL);
return 0;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 61d7550..162c95a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1596,6 +1596,7 @@
{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbb..70cccc7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
+ else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+ udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03d..db99c08 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Artisman Watchdog Dongle */
+ { USB_DEVICE(0x04b4, 0x0526), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -64,6 +68,9 @@
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+ /* Broadcom BCM92035DGROM BT dongle */
+ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index eaa79c8..93ead19 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,11 +76,12 @@
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
+#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000)
-#define at91_udp_read(dev, reg) \
- __raw_readl((dev)->udp_baseaddr + (reg))
-#define at91_udp_write(dev, reg, val) \
- __raw_writel((val), (dev)->udp_baseaddr + (reg))
+#define at91_udp_read(udc, reg) \
+ __raw_readl((udc)->udp_baseaddr + (reg))
+#define at91_udp_write(udc, reg, val) \
+ __raw_writel((val), (udc)->udp_baseaddr + (reg))
/*-------------------------------------------------------------------------*/
@@ -102,8 +103,9 @@
u32 csr;
struct at91_request *req;
unsigned long flags;
+ struct at91_udc *udc = ep->udc;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
csr = __raw_readl(ep->creg);
@@ -147,7 +149,7 @@
&req->req, length,
req->req.length, req->req.buf);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
}
static void proc_irq_show(struct seq_file *s, const char *label, u32 mask)
@@ -272,7 +274,9 @@
VDBG("%s done %p, status %d\n", ep->ep.name, req, status);
ep->stopped = 1;
+ spin_unlock(&udc->lock);
req->req.complete(&ep->ep, &req->req);
+ spin_lock(&udc->lock);
ep->stopped = stopped;
/* ep0 is always ready; other endpoints need a non-empty queue */
@@ -472,7 +476,7 @@
const struct usb_endpoint_descriptor *desc)
{
struct at91_ep *ep = container_of(_ep, struct at91_ep, ep);
- struct at91_udc *dev = ep->udc;
+ struct at91_udc *udc = ep->udc;
u16 maxpacket;
u32 tmp;
unsigned long flags;
@@ -487,7 +491,7 @@
return -EINVAL;
}
- if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
DBG("bogus device state\n");
return -ESHUTDOWN;
}
@@ -521,7 +525,7 @@
}
ok:
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
/* initialize endpoint to match this descriptor */
ep->is_in = usb_endpoint_dir_in(desc);
@@ -540,10 +544,10 @@
* reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
* since endpoint resets don't reset hw pingpong state.
*/
- at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
- at91_udp_write(dev, AT91_UDP_RST_EP, 0);
+ at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_RST_EP, 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -556,7 +560,7 @@
if (ep == &ep->udc->ep[0])
return -EINVAL;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
nuke(ep, -ESHUTDOWN);
@@ -571,7 +575,7 @@
__raw_writel(0, ep->creg);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -607,7 +611,7 @@
{
struct at91_request *req;
struct at91_ep *ep;
- struct at91_udc *dev;
+ struct at91_udc *udc;
int status;
unsigned long flags;
@@ -625,9 +629,9 @@
return -EINVAL;
}
- dev = ep->udc;
+ udc = ep->udc;
- if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
DBG("invalid device\n");
return -EINVAL;
}
@@ -635,7 +639,7 @@
_req->status = -EINPROGRESS;
_req->actual = 0;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
/* try to kickstart any empty and idle queue */
if (list_empty(&ep->queue) && !ep->stopped) {
@@ -653,7 +657,7 @@
if (is_ep0) {
u32 tmp;
- if (!dev->req_pending) {
+ if (!udc->req_pending) {
status = -EINVAL;
goto done;
}
@@ -662,11 +666,11 @@
* defer changing CONFG until after the gadget driver
* reconfigures the endpoints.
*/
- if (dev->wait_for_config_ack) {
- tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT);
+ if (udc->wait_for_config_ack) {
+ tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT);
tmp ^= AT91_UDP_CONFG;
VDBG("toggle config\n");
- at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp);
+ at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp);
}
if (req->req.length == 0) {
ep0_in_status:
@@ -676,7 +680,7 @@
tmp &= ~SET_FX;
tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
__raw_writel(tmp, ep->creg);
- dev->req_pending = 0;
+ udc->req_pending = 0;
goto done;
}
}
@@ -695,31 +699,40 @@
if (req && !status) {
list_add_tail (&req->queue, &ep->queue);
- at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
+ at91_udp_write(udc, AT91_UDP_IER, ep->int_mask);
}
done:
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return (status < 0) ? status : 0;
}
static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
- struct at91_ep *ep;
+ struct at91_ep *ep;
struct at91_request *req;
+ unsigned long flags;
+ struct at91_udc *udc;
ep = container_of(_ep, struct at91_ep, ep);
if (!_ep || ep->ep.name == ep0name)
return -EINVAL;
+ udc = ep->udc;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
/* make sure it's actually queued on this endpoint */
list_for_each_entry (req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
- if (&req->req != _req)
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&udc->lock, flags);
return -EINVAL;
+ }
done(ep, req, -ECONNRESET);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -736,7 +749,7 @@
return -EINVAL;
creg = ep->creg;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
csr = __raw_readl(creg);
@@ -761,7 +774,7 @@
__raw_writel(csr, creg);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return status;
}
@@ -795,7 +808,7 @@
unsigned long flags;
DBG("%s\n", __func__ );
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
if (!udc->clocked || !udc->suspended)
goto done;
@@ -809,7 +822,7 @@
at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate);
done:
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return status;
}
@@ -851,8 +864,11 @@
ep->stopped = 1;
nuke(ep, -ESHUTDOWN);
}
- if (driver)
+ if (driver) {
+ spin_unlock(&udc->lock);
driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
udc_reinit(udc);
}
@@ -935,13 +951,13 @@
unsigned long flags;
// VDBG("vbus %s\n", is_active ? "on" : "off");
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->vbus = (is_active != 0);
if (udc->driver)
pullup(udc, is_active);
else
pullup(udc, 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -950,10 +966,10 @@
struct at91_udc *udc = to_udc(gadget);
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->enabled = is_on = !!is_on;
pullup(udc, is_on);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -962,9 +978,9 @@
struct at91_udc *udc = to_udc(gadget);
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&udc->lock, flags);
udc->selfpowered = (is_on != 0);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
@@ -1226,8 +1242,11 @@
#undef w_length
/* pass request up to the gadget driver */
- if (udc->driver)
+ if (udc->driver) {
+ spin_unlock(&udc->lock);
status = udc->driver->setup(&udc->gadget, &pkt.r);
+ spin_lock(&udc->lock);
+ }
else
status = -ENODEV;
if (status < 0) {
@@ -1378,6 +1397,9 @@
struct at91_udc *udc = _udc;
u32 rescans = 5;
int disable_clock = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
if (!udc->clocked) {
clk_on(udc);
@@ -1433,8 +1455,11 @@
* and then into standby to avoid drawing more than
* 500uA power (2500uA for some high-power configs).
*/
- if (udc->driver && udc->driver->suspend)
+ if (udc->driver && udc->driver->suspend) {
+ spin_unlock(&udc->lock);
udc->driver->suspend(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
/* host initiated resume */
} else if (status & AT91_UDP_RXRSM) {
@@ -1451,8 +1476,11 @@
* would normally want to switch out of slow clock
* mode into normal mode.
*/
- if (udc->driver && udc->driver->resume)
+ if (udc->driver && udc->driver->resume) {
+ spin_unlock(&udc->lock);
udc->driver->resume(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
/* endpoint IRQs are cleared by handling them */
} else {
@@ -1474,6 +1502,8 @@
if (disable_clock)
clk_off(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
return IRQ_HANDLED;
}
@@ -1556,24 +1586,53 @@
/* ep6 and ep7 are also reserved (custom silicon might use them) */
};
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+ value ^= udc->board.vbus_active_low;
+ if (value != udc->vbus)
+ at91_vbus_session(&udc->gadget, value);
+}
+
static irqreturn_t at91_vbus_irq(int irq, void *_udc)
{
struct at91_udc *udc = _udc;
- unsigned value;
/* vbus needs at least brief debouncing */
udelay(10);
- value = gpio_get_value(udc->board.vbus_pin);
- if (value != udc->vbus)
- at91_vbus_session(&udc->gadget, value);
+ at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
return IRQ_HANDLED;
}
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+ struct at91_udc *udc = container_of(work, struct at91_udc,
+ vbus_timer_work);
+
+ at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+ if (!timer_pending(&udc->vbus_timer))
+ mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+ struct at91_udc *udc = (struct at91_udc *)data;
+
+ /*
+ * If we are polling vbus it is likely that the gpio is on an
+ * bus such as i2c or spi which may sleep, so schedule some work
+ * to read the vbus gpio
+ */
+ if (!work_pending(&udc->vbus_timer_work))
+ schedule_work(&udc->vbus_timer_work);
+}
+
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
struct at91_udc *udc = &controller;
int retval;
+ unsigned long flags;
if (!driver
|| driver->speed < USB_SPEED_FULL
@@ -1605,9 +1664,9 @@
return retval;
}
- local_irq_disable();
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 1);
- local_irq_enable();
+ spin_unlock_irqrestore(&udc->lock, flags);
DBG("bound to %s\n", driver->driver.name);
return 0;
@@ -1617,15 +1676,16 @@
int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
{
struct at91_udc *udc = &controller;
+ unsigned long flags;
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
- local_irq_disable();
+ spin_lock_irqsave(&udc->lock, flags);
udc->enabled = 0;
at91_udp_write(udc, AT91_UDP_IDR, ~0);
pullup(udc, 0);
- local_irq_enable();
+ spin_unlock_irqrestore(&udc->lock, flags);
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
@@ -1641,8 +1701,13 @@
static void at91udc_shutdown(struct platform_device *dev)
{
+ struct at91_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
+
/* force disconnect on reboot */
+ spin_lock_irqsave(&udc->lock, flags);
pullup(platform_get_drvdata(dev), 0);
+ spin_unlock_irqrestore(&udc->lock, flags);
}
static int __init at91udc_probe(struct platform_device *pdev)
@@ -1683,6 +1748,7 @@
udc->board = *(struct at91_udc_data *) dev->platform_data;
udc->pdev = pdev;
udc->enabled = 0;
+ spin_lock_init(&udc->lock);
/* rm9200 needs manual D+ pullup; off by default */
if (cpu_is_at91rm9200()) {
@@ -1763,13 +1829,23 @@
* Get the initial state of VBUS - we cannot expect
* a pending interrupt.
*/
- udc->vbus = gpio_get_value(udc->board.vbus_pin);
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- IRQF_DISABLED, driver_name, udc)) {
- DBG("request vbus irq %d failed\n",
- udc->board.vbus_pin);
- retval = -EBUSY;
- goto fail3;
+ udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+ udc->board.vbus_active_low;
+
+ if (udc->board.vbus_polled) {
+ INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+ setup_timer(&udc->vbus_timer, at91_vbus_timer,
+ (unsigned long)udc);
+ mod_timer(&udc->vbus_timer,
+ jiffies + VBUS_POLL_TIMEOUT);
+ } else {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+ IRQF_DISABLED, driver_name, udc)) {
+ DBG("request vbus irq %d failed\n",
+ udc->board.vbus_pin);
+ retval = -EBUSY;
+ goto fail3;
+ }
}
} else {
DBG("no VBUS detection, assuming always-on\n");
@@ -1804,13 +1880,16 @@
{
struct at91_udc *udc = platform_get_drvdata(pdev);
struct resource *res;
+ unsigned long flags;
DBG("remove\n");
if (udc->driver)
return -EBUSY;
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 0);
+ spin_unlock_irqrestore(&udc->lock, flags);
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
@@ -1840,6 +1919,7 @@
{
struct at91_udc *udc = platform_get_drvdata(pdev);
int wake = udc->driver && device_may_wakeup(&pdev->dev);
+ unsigned long flags;
/* Unless we can act normally to the host (letting it wake us up
* whenever it has work for us) force disconnect. Wakeup requires
@@ -1849,13 +1929,15 @@
if ((!udc->suspended && udc->addr)
|| !wake
|| at91_suspend_entering_slow_clock()) {
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 0);
wake = 0;
+ spin_unlock_irqrestore(&udc->lock, flags);
} else
enable_irq_wake(udc->udp_irq);
udc->active_suspend = wake;
- if (udc->board.vbus_pin > 0 && wake)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
enable_irq_wake(udc->board.vbus_pin);
return 0;
}
@@ -1863,15 +1945,20 @@
static int at91udc_resume(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ unsigned long flags;
- if (udc->board.vbus_pin > 0 && udc->active_suspend)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+ udc->active_suspend)
disable_irq_wake(udc->board.vbus_pin);
/* maybe reconnect to host; if so, clocks on */
if (udc->active_suspend)
disable_irq_wake(udc->udp_irq);
- else
+ else {
+ spin_lock_irqsave(&udc->lock, flags);
pullup(udc, 1);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ }
return 0;
}
#else
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index c65d622..108ca54 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -144,6 +144,9 @@
struct proc_dir_entry *pde;
void __iomem *udp_baseaddr;
int udp_irq;
+ spinlock_t lock;
+ struct timer_list vbus_timer;
+ struct work_struct vbus_timer_work;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index d69eccf..2aaa0f7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -136,7 +136,7 @@
* handling setup requests immidiatelly user space may be so
* slow that another setup will be sent to the gadget but this
* time not to us but another function and then there could be
- * a race. Is taht the case? Or maybe we can use cdev->req
+ * a race. Is that the case? Or maybe we can use cdev->req
* after all, maybe we just need some spinlock for that? */
struct usb_request *ep0req; /* P: mutex */
struct completion ep0req_completion; /* P: mutex */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d89..9807624 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@
udc_disable(udc);
}
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
extern void pxa27x_clear_otgph(void);
#else
#define pxa27x_clear_otgph() do {} while (0)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e724a05..ea2b3c7 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@
else
dev->ep0state = EP0_OUT_DATA_PHASE;
+ if (!dev->driver)
+ return;
+
+ /* deliver the request to the gadget driver */
ret = dev->driver->setup(&dev->gadget, crq);
if (ret < 0) {
if (dev->req_config) {
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debd..4181638 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@
__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
}
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
extern void pxa27x_clear_otgph(void);
#else
#define pxa27x_clear_otgph() do {} while (0)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03a..2eb658d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@
return 0;
}
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_ring *ep_ring;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+ ep_ring = virt_dev->eps[0].ring;
+ /*
+ * FIXME we don't keep track of the dequeue pointer very well after a
+ * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+ * host to our enqueue pointer. This should only be called after a
+ * configured device has reset, so all control transfers should have
+ * been completed or cancelled before the reset.
+ */
+ ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+ ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
@@ -1002,7 +1023,7 @@
return EP_INTERVAL(interval);
}
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
@@ -1010,7 +1031,8 @@
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed != USB_SPEED_SUPER ||
+ !usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94e6934..bfc99a9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2380,16 +2380,19 @@
u32 field3, u32 field4, bool command_must_succeed)
{
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+ int ret;
+
if (!command_must_succeed)
reserved_trbs++;
- if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
- if (!in_interrupt())
- xhci_err(xhci, "ERR: No room for command on command ring\n");
+ ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+ reserved_trbs, GFP_ATOMIC);
+ if (ret < 0) {
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
if (command_must_succeed)
xhci_err(xhci, "ERR: Reserved TRB counting for "
"unfailable commands failed.\n");
- return -ENOMEM;
+ return ret;
}
queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd..3998f72 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@
/* If this is a Set Address to an unconfigured device, setup ep 0 */
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
+ else
+ xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d3..6c7e343 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d9303..d25814c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@
}
if (!sisusb->devinit) {
- if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+ if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+ sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
if (sisusb_init_gfxdevice(sisusb, 0)) {
mutex_unlock(&sisusb->lock);
dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@
sisusb->present = 1;
- if (dev->speed == USB_SPEED_HIGH) {
+ if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
int initscreen = 1;
#ifdef INCL_SISUSB_CON
if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f..3c48e77 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-#endif
-
/*
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index da7e334..e298dc4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -691,6 +691,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -737,6 +738,14 @@
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bbc159a..d01946d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -696,6 +696,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+
+/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
* http://winglucofacts.com/cables/
*/
@@ -1017,3 +1023,12 @@
#define MJSG_SR_RADIO_PID 0x9379
#define MJSG_XM_RADIO_PID 0x937A
#define MJSG_HD_RADIO_PID 0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8..5cd30e43 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@
#define AMOI_PRODUCT_H01 0x0800
#define AMOI_PRODUCT_H01A 0x7002
#define AMOI_PRODUCT_H02 0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407
#define DELL_VENDOR_ID 0x413C
@@ -302,6 +303,7 @@
#define QISDA_PRODUCT_H21_4512 0x4512
#define QISDA_PRODUCT_H21_4523 0x4523
#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4518 0x4518
#define QISDA_PRODUCT_H20_4519 0x4519
/* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 93d72eb..cde67ca 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@
{USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */
{USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
+ {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */
+ {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb0..d47b56e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+ { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */
/* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 4471642..64ec073 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@
/* fill the common fields in the URB */
us->current_urb->context = &urb_done;
- us->current_urb->actual_length = 0;
- us->current_urb->error_count = 0;
- us->current_urb->status = 0;
+ us->current_urb->transfer_flags = 0;
/* we assume that if transfer_buffer isn't us->iobuf then it
* hasn't been mapped for DMA. Yes, this is clunky, but it's
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 57a593c..d219070 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -177,8 +177,8 @@
break;
}
if (err != len)
- pr_err("Truncated TX packet: "
- " len %d != %zd\n", err, len);
+ pr_debug("Truncated TX packet: "
+ " len %d != %zd\n", err, len);
vhost_add_used_and_signal(&net->dev, vq, head, 0);
total_len += len;
if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
@@ -275,8 +275,8 @@
}
/* TODO: Should check and handle checksum. */
if (err > len) {
- pr_err("Discarded truncated rx packet: "
- " len %d > %zd\n", err, len);
+ pr_debug("Discarded truncated rx packet: "
+ " len %d > %zd\n", err, len);
vhost_discard_vq_desc(vq);
continue;
}
@@ -534,11 +534,16 @@
rcu_assign_pointer(vq->private_data, sock);
vhost_net_enable_vq(n, vq);
done:
+ mutex_unlock(&vq->mutex);
+
if (oldsock) {
vhost_net_flush_vq(n, index);
fput(oldsock->file);
}
+ mutex_unlock(&n->dev.mutex);
+ return 0;
+
err_vq:
mutex_unlock(&vq->mutex);
err:
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 515cf19..c4e1764 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2872,7 +2872,7 @@
}
#if 0
- /* Power down TV DAC, taht saves a significant amount of power,
+ /* Power down TV DAC, that saves a significant amount of power,
* we'll have something better once we actually have some TVOut
* support
*/
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 40f6132..34b2fc47 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -95,7 +95,7 @@
{ { 8, 4, 0 }, { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
};
-static struct fb_fix_screeninfo au1100fb_fix __initdata = {
+static struct fb_fix_screeninfo au1100fb_fix __devinitdata = {
.id = "AU1100 FB",
.xpanstep = 1,
.ypanstep = 1,
@@ -103,7 +103,7 @@
.accel = FB_ACCEL_NONE,
};
-static struct fb_var_screeninfo au1100fb_var __initdata = {
+static struct fb_var_screeninfo au1100fb_var __devinitdata = {
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
@@ -458,7 +458,7 @@
/* AU1100 LCD controller device driver */
-static int __init au1100fb_drv_probe(struct platform_device *dev)
+static int __devinit au1100fb_drv_probe(struct platform_device *dev)
{
struct au1100fb_device *fbdev = NULL;
struct resource *regs_res;
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 7d8c55d..ca3355e 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -91,10 +91,10 @@
static uint32_t gbe_cmap[256];
static int gbe_turned_on; /* 0 turned off, 1 turned on */
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
/* default CRT mode */
-static struct fb_var_screeninfo default_var_CRT __initdata = {
+static struct fb_var_screeninfo default_var_CRT __devinitdata = {
/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
.xres = 640,
.yres = 480,
@@ -125,7 +125,7 @@
};
/* default LCD mode */
-static struct fb_var_screeninfo default_var_LCD __initdata = {
+static struct fb_var_screeninfo default_var_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
@@ -157,7 +157,7 @@
/* default modedb mode */
/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
-static struct fb_videomode default_mode_CRT __initdata = {
+static struct fb_videomode default_mode_CRT __devinitdata = {
.refresh = 60,
.xres = 640,
.yres = 480,
@@ -172,7 +172,7 @@
.vmode = FB_VMODE_NONINTERLACED,
};
/* 1600x1024 SGI flatpanel 1600sw */
-static struct fb_videomode default_mode_LCD __initdata = {
+static struct fb_videomode default_mode_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
@@ -186,8 +186,8 @@
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __devinitdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __devinitdata = &default_var_CRT;
static int flat_panel_enabled = 0;
@@ -1098,7 +1098,7 @@
* Initialization
*/
-static int __init gbefb_setup(char *options)
+static int __devinit gbefb_setup(char *options)
{
char *this_opt;
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 3b1237a..f6fdc20 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -25,7 +25,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/jiffies.h>
@@ -525,10 +525,8 @@
* Called from map_io. We need to call to this early enough so that we
* can reserve the fixed SDRAM regions before VM could get hold of them.
*/
-void __init omap_vram_reserve_sdram(void)
+void __init omap_vram_reserve_sdram_memblock(void)
{
- struct bootmem_data *bdata;
- unsigned long sdram_start, sdram_size;
u32 paddr;
u32 size = 0;
@@ -555,29 +553,28 @@
size = PAGE_ALIGN(size);
- bdata = NODE_DATA(0)->bdata;
- sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
- sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-
if (paddr) {
- if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
- paddr + size > sdram_start + sdram_size) {
+ struct memblock_property res;
+
+ res.base = paddr;
+ res.size = size;
+ if ((paddr & ~PAGE_MASK) || memblock_find(&res) ||
+ res.base != paddr || res.size != size) {
pr_err("Illegal SDRAM region for VRAM\n");
return;
}
- if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
- pr_err("FB: failed to reserve VRAM\n");
- return;
- }
- } else {
- if (size > sdram_size) {
- pr_err("Illegal SDRAM size for VRAM\n");
+ if (memblock_is_region_reserved(paddr, size)) {
+ pr_err("FB: failed to reserve VRAM - busy\n");
return;
}
- paddr = virt_to_phys(alloc_bootmem_pages(size));
- BUG_ON(paddr & ~PAGE_MASK);
+ if (memblock_reserve(paddr, size) < 0) {
+ pr_err("FB: failed to reserve VRAM - no memory\n");
+ return;
+ }
+ } else {
+ paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
}
omap_vram_add_region(paddr, size);
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index 0f361b6..0c69fa2 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -44,7 +44,7 @@
};
-static struct fb_var_screeninfo pmagbafb_defined __initdata = {
+static struct fb_var_screeninfo pmagbafb_defined __devinitdata = {
.xres = 1024,
.yres = 864,
.xres_virtual = 1024,
@@ -68,7 +68,7 @@
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_fix_screeninfo pmagbafb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbafb_fix __devinitdata = {
.id = "PMAG-BA",
.smem_len = (1024 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
@@ -142,7 +142,7 @@
}
-static int __init pmagbafb_probe(struct device *dev)
+static int __devinit pmagbafb_probe(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
resource_size_t start, len;
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 2de0806..22fcb9a 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -45,7 +45,7 @@
};
-static struct fb_var_screeninfo pmagbbfb_defined __initdata = {
+static struct fb_var_screeninfo pmagbbfb_defined __devinitdata = {
.bits_per_pixel = 8,
.red.length = 8,
.green.length = 8,
@@ -58,7 +58,7 @@
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct fb_fix_screeninfo pmagbbfb_fix __initdata = {
+static struct fb_fix_screeninfo pmagbbfb_fix __devinitdata = {
.id = "PMAGB-BA",
.smem_len = (2048 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
@@ -148,7 +148,7 @@
/*
* Set up screen parameters.
*/
-static void __init pmagbbfb_screen_setup(struct fb_info *info)
+static void __devinit pmagbbfb_screen_setup(struct fb_info *info)
{
struct pmagbbfb_par *par = info->par;
@@ -180,9 +180,9 @@
/*
* Determine oscillator configuration.
*/
-static void __init pmagbbfb_osc_setup(struct fb_info *info)
+static void __devinit pmagbbfb_osc_setup(struct fb_info *info)
{
- static unsigned int pmagbbfb_freqs[] __initdata = {
+ static unsigned int pmagbbfb_freqs[] __devinitdata = {
130808, 119843, 104000, 92980, 74370, 72800,
69197, 66000, 65000, 50350, 36000, 32000, 25175
};
@@ -247,7 +247,7 @@
};
-static int __init pmagbbfb_probe(struct device *dev)
+static int __devinit pmagbbfb_probe(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
resource_size_t start, len;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index afe7e21..1475ed6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -164,7 +164,8 @@
gfp_t gfp)
{
struct vring_virtqueue *vq = to_vvq(_vq);
- unsigned int i, avail, head, uninitialized_var(prev);
+ unsigned int i, avail, uninitialized_var(prev);
+ int head;
START_USE(vq);
@@ -174,7 +175,7 @@
* buffers, then go indirect. FIXME: tune this threshold */
if (vq->indirect && (out + in) > 1 && vq->num_free) {
head = vring_add_indirect(vq, sg, out, in, gfp);
- if (head != vq->vring.num)
+ if (likely(head >= 0))
goto add_head;
}
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index d61e3b2..36d961f 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -146,7 +146,7 @@
while (rdir->head < rdir->tail) {
p9stat_init(&st);
err = p9stat_read(rdir->buf + rdir->head,
- buflen - rdir->head, &st,
+ rdir->tail - rdir->head, &st,
fid->clnt->proto_version);
if (err) {
P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 0d1d966..c3df14c 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2304,12 +2304,17 @@
return ret;
}
+/*
+ * min slot controls the lowest index we're willing to push to the
+ * right. We'll push up to and including min_slot, but no lower
+ */
static noinline int __push_leaf_right(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
int data_size, int empty,
struct extent_buffer *right,
- int free_space, u32 left_nritems)
+ int free_space, u32 left_nritems,
+ u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *upper = path->nodes[1];
@@ -2327,7 +2332,7 @@
if (empty)
nr = 0;
else
- nr = 1;
+ nr = max_t(u32, 1, min_slot);
if (path->slots[0] >= left_nritems)
push_space += data_size;
@@ -2469,10 +2474,14 @@
*
* returns 1 if the push failed because the other node didn't have enough
* room, 0 if everything worked out and < 0 if there were major errors.
+ *
+ * this will push starting from min_slot to the end of the leaf. It won't
+ * push any slot lower than min_slot
*/
static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path,
+ int min_data_size, int data_size,
+ int empty, u32 min_slot)
{
struct extent_buffer *left = path->nodes[0];
struct extent_buffer *right;
@@ -2514,8 +2523,8 @@
if (left_nritems == 0)
goto out_unlock;
- return __push_leaf_right(trans, root, path, data_size, empty,
- right, free_space, left_nritems);
+ return __push_leaf_right(trans, root, path, min_data_size, empty,
+ right, free_space, left_nritems, min_slot);
out_unlock:
btrfs_tree_unlock(right);
free_extent_buffer(right);
@@ -2525,12 +2534,17 @@
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us do all the
+ * items
*/
static noinline int __push_leaf_left(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, int data_size,
int empty, struct extent_buffer *left,
- int free_space, int right_nritems)
+ int free_space, u32 right_nritems,
+ u32 max_slot)
{
struct btrfs_disk_key disk_key;
struct extent_buffer *right = path->nodes[0];
@@ -2549,9 +2563,9 @@
slot = path->slots[1];
if (empty)
- nr = right_nritems;
+ nr = min(right_nritems, max_slot);
else
- nr = right_nritems - 1;
+ nr = min(right_nritems - 1, max_slot);
for (i = 0; i < nr; i++) {
item = btrfs_item_nr(right, i);
@@ -2712,10 +2726,14 @@
/*
* push some data in the path leaf to the left, trying to free up at
* least data_size bytes. returns zero if the push worked, nonzero otherwise
+ *
+ * max_slot can put a limit on how far into the leaf we'll push items. The
+ * item at 'max_slot' won't be touched. Use (u32)-1 to make us push all the
+ * items
*/
static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
- *root, struct btrfs_path *path, int data_size,
- int empty)
+ *root, struct btrfs_path *path, int min_data_size,
+ int data_size, int empty, u32 max_slot)
{
struct extent_buffer *right = path->nodes[0];
struct extent_buffer *left;
@@ -2761,8 +2779,9 @@
goto out;
}
- return __push_leaf_left(trans, root, path, data_size,
- empty, left, free_space, right_nritems);
+ return __push_leaf_left(trans, root, path, min_data_size,
+ empty, left, free_space, right_nritems,
+ max_slot);
out:
btrfs_tree_unlock(left);
free_extent_buffer(left);
@@ -2855,6 +2874,64 @@
}
/*
+ * double splits happen when we need to insert a big item in the middle
+ * of a leaf. A double split can leave us with 3 mostly empty leaves:
+ * leaf: [ slots 0 - N] [ our target ] [ N + 1 - total in leaf ]
+ * A B C
+ *
+ * We avoid this by trying to push the items on either side of our target
+ * into the adjacent leaves. If all goes well we can avoid the double split
+ * completely.
+ */
+static noinline int push_for_double_split(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ int data_size)
+{
+ int ret;
+ int progress = 0;
+ int slot;
+ u32 nritems;
+
+ slot = path->slots[0];
+
+ /*
+ * try to push all the items after our slot into the
+ * right leaf
+ */
+ ret = push_leaf_right(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ nritems = btrfs_header_nritems(path->nodes[0]);
+ /*
+ * our goal is to get our slot at the start or end of a leaf. If
+ * we've done so we're done
+ */
+ if (path->slots[0] == 0 || path->slots[0] == nritems)
+ return 0;
+
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+
+ /* try to push all the items before our slot into the next leaf */
+ slot = path->slots[0];
+ ret = push_leaf_left(trans, root, path, 1, data_size, 0, slot);
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0)
+ progress++;
+
+ if (progress)
+ return 0;
+ return 1;
+}
+
+/*
* split the path's leaf in two, making sure there is at least data_size
* available for the resulting leaf level of the path.
*
@@ -2876,6 +2953,7 @@
int wret;
int split;
int num_doubles = 0;
+ int tried_avoid_double = 0;
l = path->nodes[0];
slot = path->slots[0];
@@ -2884,12 +2962,14 @@
return -EOVERFLOW;
/* first try to make some room by pushing left and right */
- if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
- wret = push_leaf_right(trans, root, path, data_size, 0);
+ if (data_size) {
+ wret = push_leaf_right(trans, root, path, data_size,
+ data_size, 0, 0);
if (wret < 0)
return wret;
if (wret) {
- wret = push_leaf_left(trans, root, path, data_size, 0);
+ wret = push_leaf_left(trans, root, path, data_size,
+ data_size, 0, (u32)-1);
if (wret < 0)
return wret;
}
@@ -2923,6 +3003,8 @@
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2;
}
}
@@ -2939,6 +3021,8 @@
if (mid != nritems &&
leaf_space_used(l, mid, nritems - mid) +
data_size > BTRFS_LEAF_DATA_SIZE(root)) {
+ if (data_size && !tried_avoid_double)
+ goto push_for_double;
split = 2 ;
}
}
@@ -3019,6 +3103,13 @@
}
return ret;
+
+push_for_double:
+ push_for_double_split(trans, root, path, data_size);
+ tried_avoid_double = 1;
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= data_size)
+ return 0;
+ goto again;
}
static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans,
@@ -3915,13 +4006,15 @@
extent_buffer_get(leaf);
btrfs_set_path_blocking(path);
- wret = push_leaf_left(trans, root, path, 1, 1);
+ wret = push_leaf_left(trans, root, path, 1, 1,
+ 1, (u32)-1);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
if (path->nodes[0] == leaf &&
btrfs_header_nritems(leaf)) {
- wret = push_leaf_right(trans, root, path, 1, 1);
+ wret = push_leaf_right(trans, root, path, 1,
+ 1, 1, 0);
if (wret < 0 && wret != -ENOSPC)
ret = wret;
}
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 4dbaf89..9254b3d 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1458,7 +1458,7 @@
*/
/* the destination must be opened for writing */
- if (!(file->f_mode & FMODE_WRITE))
+ if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND))
return -EINVAL;
ret = mnt_want_write(file->f_path.mnt);
@@ -1511,7 +1511,7 @@
/* determine range to clone */
ret = -EINVAL;
- if (off >= src->i_size || off + len > src->i_size)
+ if (off + len > src->i_size || off + len < off)
goto out_unlock;
if (len == 0)
olen = len = src->i_size - off;
@@ -1578,6 +1578,7 @@
u64 disko = 0, diskl = 0;
u64 datao = 0, datal = 0;
u8 comp;
+ u64 endoff;
size = btrfs_item_size_nr(leaf, slot);
read_extent_buffer(leaf, buf,
@@ -1712,9 +1713,18 @@
btrfs_release_path(root, path);
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- if (new_key.offset + datal > inode->i_size)
- btrfs_i_size_write(inode,
- new_key.offset + datal);
+
+ /*
+ * we round up to the block size at eof when
+ * determining which extents to clone above,
+ * but shouldn't round up the file size
+ */
+ endoff = new_key.offset + datal;
+ if (endoff > off+olen)
+ endoff = off+olen;
+ if (endoff > inode->i_size)
+ btrfs_i_size_write(inode, endoff);
+
BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig
index 04b8280..bc87b9c 100644
--- a/fs/ceph/Kconfig
+++ b/fs/ceph/Kconfig
@@ -2,7 +2,7 @@
tristate "Ceph distributed file system (EXPERIMENTAL)"
depends on INET && EXPERIMENTAL
select LIBCRC32C
- select CONFIG_CRYPTO_AES
+ select CRYPTO_AES
help
Choose Y or M here to include support for mounting the
experimental Ceph distributed file system. Ceph is an extremely
diff --git a/fs/ceph/auth_x.c b/fs/ceph/auth_x.c
index 3fe4904..6d44053 100644
--- a/fs/ceph/auth_x.c
+++ b/fs/ceph/auth_x.c
@@ -613,6 +613,9 @@
remove_ticket_handler(ac, th);
}
+ if (xi->auth_authorizer.buf)
+ ceph_buffer_put(xi->auth_authorizer.buf);
+
kfree(ac->private);
ac->private = NULL;
}
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 74144d6..b81be9a 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -627,7 +627,7 @@
if (fmode >= 0)
__ceph_get_fmode(ci, fmode);
spin_unlock(&inode->i_lock);
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
return 0;
}
@@ -1181,7 +1181,7 @@
}
if (wake)
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
return delayed;
}
@@ -2153,7 +2153,7 @@
else if (flushsnaps)
ceph_flush_snaps(ci);
if (wake)
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
if (put)
iput(inode);
}
@@ -2229,7 +2229,7 @@
iput(inode);
} else if (complete_capsnap) {
ceph_flush_snaps(ci);
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
}
if (drop_capsnap)
iput(inode);
@@ -2405,7 +2405,7 @@
if (queue_invalidate)
ceph_queue_invalidate(inode);
if (wake)
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
if (check_caps == 1)
ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
@@ -2460,7 +2460,7 @@
struct ceph_inode_info,
i_flushing_item)->vfs_inode);
mdsc->num_cap_flushing--;
- wake_up(&mdsc->cap_flushing_wq);
+ wake_up_all(&mdsc->cap_flushing_wq);
dout(" inode %p now !flushing\n", inode);
if (ci->i_dirty_caps == 0) {
@@ -2472,7 +2472,7 @@
}
}
spin_unlock(&mdsc->cap_dirty_lock);
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
out:
spin_unlock(&inode->i_lock);
@@ -2984,6 +2984,7 @@
memcpy(*p, dentry->d_name.name, dentry->d_name.len);
*p += dentry->d_name.len;
rel->dname_seq = cpu_to_le32(di->lease_seq);
+ __ceph_mdsc_drop_dentry_lease(dentry);
}
spin_unlock(&dentry->d_lock);
return ret;
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index f857193..f94ed3c 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -266,6 +266,7 @@
spin_lock(&inode->i_lock);
if ((filp->f_pos == 2 || fi->dentry) &&
!ceph_test_opt(client, NOASYNCREADDIR) &&
+ ceph_snap(inode) != CEPH_SNAPDIR &&
(ci->i_ceph_flags & CEPH_I_COMPLETE) &&
__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
err = __dcache_readdir(filp, dirent, filldir);
@@ -1013,18 +1014,22 @@
/*
* When a dentry is released, clear the dir I_COMPLETE if it was part
- * of the current dir gen.
+ * of the current dir gen or if this is in the snapshot namespace.
*/
static void ceph_dentry_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
struct inode *parent_inode = dentry->d_parent->d_inode;
+ u64 snapid = ceph_snap(parent_inode);
- if (parent_inode) {
+ dout("dentry_release %p parent %p\n", dentry, parent_inode);
+
+ if (parent_inode && snapid != CEPH_SNAPDIR) {
struct ceph_inode_info *ci = ceph_inode(parent_inode);
spin_lock(&parent_inode->i_lock);
- if (ci->i_shared_gen == di->lease_shared_gen) {
+ if (ci->i_shared_gen == di->lease_shared_gen ||
+ snapid <= CEPH_MAXSNAP) {
dout(" clearing %p complete (d_release)\n",
parent_inode);
ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
@@ -1241,7 +1246,9 @@
struct dentry_operations ceph_snapdir_dentry_ops = {
.d_revalidate = ceph_snapdir_d_revalidate,
+ .d_release = ceph_dentry_release,
};
struct dentry_operations ceph_snap_dentry_ops = {
+ .d_release = ceph_dentry_release,
};
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 6251a15..7c08698 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -265,7 +265,7 @@
kmem_cache_free(ceph_file_cachep, cf);
/* wake up anyone waiting for caps on this inode */
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
return 0;
}
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 8f9b9fe..389f9db 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1199,8 +1199,10 @@
goto out;
}
err = ceph_init_dentry(dn);
- if (err < 0)
+ if (err < 0) {
+ dput(dn);
goto out;
+ }
} else if (dn->d_inode &&
(ceph_ino(dn->d_inode) != vino.ino ||
ceph_snap(dn->d_inode) != vino.snap)) {
@@ -1499,7 +1501,7 @@
if (wrbuffer_refs == 0)
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
if (wake)
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
}
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 3ab79f6..dd440bd 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -868,7 +868,7 @@
{
struct ceph_inode_info *ci = ceph_inode(inode);
- wake_up(&ci->i_cap_wq);
+ wake_up_all(&ci->i_cap_wq);
if (arg) {
spin_lock(&inode->i_lock);
ci->i_wanted_max_size = 0;
@@ -1514,6 +1514,9 @@
ceph_encode_filepath(&p, end, ino1, path1);
ceph_encode_filepath(&p, end, ino2, path2);
+ /* make note of release offset, in case we need to replay */
+ req->r_request_release_offset = p - msg->front.iov_base;
+
/* cap releases */
releases = 0;
if (req->r_inode_drop)
@@ -1561,7 +1564,7 @@
if (req->r_callback)
req->r_callback(mdsc, req);
else
- complete(&req->r_completion);
+ complete_all(&req->r_completion);
}
/*
@@ -1580,6 +1583,32 @@
dout("prepare_send_request %p tid %lld %s (attempt %d)\n", req,
req->r_tid, ceph_mds_op_name(req->r_op), req->r_attempts);
+ if (req->r_got_unsafe) {
+ /*
+ * Replay. Do not regenerate message (and rebuild
+ * paths, etc.); just use the original message.
+ * Rebuilding paths will break for renames because
+ * d_move mangles the src name.
+ */
+ msg = req->r_request;
+ rhead = msg->front.iov_base;
+
+ flags = le32_to_cpu(rhead->flags);
+ flags |= CEPH_MDS_FLAG_REPLAY;
+ rhead->flags = cpu_to_le32(flags);
+
+ if (req->r_target_inode)
+ rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
+
+ rhead->num_retry = req->r_attempts - 1;
+
+ /* remove cap/dentry releases from message */
+ rhead->num_releases = 0;
+ msg->hdr.front_len = cpu_to_le32(req->r_request_release_offset);
+ msg->front.iov_len = req->r_request_release_offset;
+ return 0;
+ }
+
if (req->r_request) {
ceph_msg_put(req->r_request);
req->r_request = NULL;
@@ -1601,13 +1630,9 @@
rhead->flags = cpu_to_le32(flags);
rhead->num_fwd = req->r_num_fwd;
rhead->num_retry = req->r_attempts - 1;
+ rhead->ino = 0;
dout(" r_locked_dir = %p\n", req->r_locked_dir);
-
- if (req->r_target_inode && req->r_got_unsafe)
- rhead->ino = cpu_to_le64(ceph_ino(req->r_target_inode));
- else
- rhead->ino = 0;
return 0;
}
@@ -1907,7 +1932,7 @@
if (head->safe) {
req->r_got_safe = true;
__unregister_request(mdsc, req);
- complete(&req->r_safe_completion);
+ complete_all(&req->r_safe_completion);
if (req->r_got_unsafe) {
/*
@@ -1922,7 +1947,7 @@
/* last unsafe request during umount? */
if (mdsc->stopping && !__get_oldest_req(mdsc))
- complete(&mdsc->safe_umount_waiters);
+ complete_all(&mdsc->safe_umount_waiters);
mutex_unlock(&mdsc->mutex);
goto out;
}
@@ -2101,7 +2126,7 @@
pr_info("mds%d reconnect denied\n", session->s_mds);
remove_session_caps(session);
wake = 1; /* for good measure */
- complete(&mdsc->session_close_waiters);
+ complete_all(&mdsc->session_close_waiters);
kick_requests(mdsc, mds);
break;
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index b292fa4..952410c 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -188,6 +188,7 @@
int r_old_inode_drop, r_old_inode_unless;
struct ceph_msg *r_request; /* original request */
+ int r_request_release_offset;
struct ceph_msg *r_reply;
struct ceph_mds_reply_info_parsed r_reply_info;
int r_err;
diff --git a/fs/ceph/messenger.c b/fs/ceph/messenger.c
index 9ad43a3..15167b2 100644
--- a/fs/ceph/messenger.c
+++ b/fs/ceph/messenger.c
@@ -43,7 +43,8 @@
* nicely render a sockaddr as a string.
*/
#define MAX_ADDR_STR 20
-static char addr_str[MAX_ADDR_STR][40];
+#define MAX_ADDR_STR_LEN 60
+static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN];
static DEFINE_SPINLOCK(addr_str_lock);
static int last_addr_str;
@@ -52,7 +53,6 @@
int i;
char *s;
struct sockaddr_in *in4 = (void *)ss;
- unsigned char *quad = (void *)&in4->sin_addr.s_addr;
struct sockaddr_in6 *in6 = (void *)ss;
spin_lock(&addr_str_lock);
@@ -64,25 +64,13 @@
switch (ss->ss_family) {
case AF_INET:
- sprintf(s, "%u.%u.%u.%u:%u",
- (unsigned int)quad[0],
- (unsigned int)quad[1],
- (unsigned int)quad[2],
- (unsigned int)quad[3],
- (unsigned int)ntohs(in4->sin_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "%pI4:%u", &in4->sin_addr,
+ (unsigned int)ntohs(in4->sin_port));
break;
case AF_INET6:
- sprintf(s, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x:%u",
- in6->sin6_addr.s6_addr16[0],
- in6->sin6_addr.s6_addr16[1],
- in6->sin6_addr.s6_addr16[2],
- in6->sin6_addr.s6_addr16[3],
- in6->sin6_addr.s6_addr16[4],
- in6->sin6_addr.s6_addr16[5],
- in6->sin6_addr.s6_addr16[6],
- in6->sin6_addr.s6_addr16[7],
- (unsigned int)ntohs(in6->sin6_port));
+ snprintf(s, MAX_ADDR_STR_LEN, "[%pI6c]:%u", &in6->sin6_addr,
+ (unsigned int)ntohs(in6->sin6_port));
break;
default:
@@ -215,12 +203,13 @@
*/
static struct socket *ceph_tcp_connect(struct ceph_connection *con)
{
- struct sockaddr *paddr = (struct sockaddr *)&con->peer_addr.in_addr;
+ struct sockaddr_storage *paddr = &con->peer_addr.in_addr;
struct socket *sock;
int ret;
BUG_ON(con->sock);
- ret = sock_create_kern(AF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+ ret = sock_create_kern(con->peer_addr.in_addr.ss_family, SOCK_STREAM,
+ IPPROTO_TCP, &sock);
if (ret)
return ERR_PTR(ret);
con->sock = sock;
@@ -234,7 +223,8 @@
dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
- ret = sock->ops->connect(sock, paddr, sizeof(*paddr), O_NONBLOCK);
+ ret = sock->ops->connect(sock, (struct sockaddr *)paddr, sizeof(*paddr),
+ O_NONBLOCK);
if (ret == -EINPROGRESS) {
dout("connect %s EINPROGRESS sk_state = %u\n",
pr_addr(&con->peer_addr.in_addr),
@@ -1009,19 +999,32 @@
struct sockaddr_in *in4 = (void *)ss;
struct sockaddr_in6 *in6 = (void *)ss;
int port;
+ char delim = ',';
+
+ if (*p == '[') {
+ delim = ']';
+ p++;
+ }
memset(ss, 0, sizeof(*ss));
if (in4_pton(p, end - p, (u8 *)&in4->sin_addr.s_addr,
- ',', &ipend)) {
+ delim, &ipend))
ss->ss_family = AF_INET;
- } else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
- ',', &ipend)) {
+ else if (in6_pton(p, end - p, (u8 *)&in6->sin6_addr.s6_addr,
+ delim, &ipend))
ss->ss_family = AF_INET6;
- } else {
+ else
goto bad;
- }
p = ipend;
+ if (delim == ']') {
+ if (*p != ']') {
+ dout("missing matching ']'\n");
+ goto bad;
+ }
+ p++;
+ }
+
/* port? */
if (p < end && *p == ':') {
port = 0;
@@ -1055,7 +1058,7 @@
return 0;
bad:
- pr_err("parse_ips bad ip '%s'\n", c);
+ pr_err("parse_ips bad ip '%.*s'\n", (int)(end - c), c);
return -EINVAL;
}
@@ -2015,20 +2018,20 @@
{
mutex_lock(&con->mutex);
if (!list_empty(&msg->list_head)) {
- dout("con_revoke %p msg %p\n", con, msg);
+ dout("con_revoke %p msg %p - was on queue\n", con, msg);
list_del_init(&msg->list_head);
ceph_msg_put(msg);
msg->hdr.seq = 0;
- if (con->out_msg == msg) {
- ceph_msg_put(con->out_msg);
- con->out_msg = NULL;
- }
+ }
+ if (con->out_msg == msg) {
+ dout("con_revoke %p msg %p - was sending\n", con, msg);
+ con->out_msg = NULL;
if (con->out_kvec_is_msg) {
con->out_skip = con->out_kvec_bytes;
con->out_kvec_is_msg = false;
}
- } else {
- dout("con_revoke %p msg %p - not queued (sent?)\n", con, msg);
+ ceph_msg_put(msg);
+ msg->hdr.seq = 0;
}
mutex_unlock(&con->mutex);
}
diff --git a/fs/ceph/mon_client.c b/fs/ceph/mon_client.c
index cc115ea..54fe01c 100644
--- a/fs/ceph/mon_client.c
+++ b/fs/ceph/mon_client.c
@@ -345,7 +345,7 @@
out:
mutex_unlock(&monc->mutex);
- wake_up(&client->auth_wq);
+ wake_up_all(&client->auth_wq);
}
/*
@@ -462,7 +462,7 @@
}
mutex_unlock(&monc->mutex);
if (req) {
- complete(&req->completion);
+ complete_all(&req->completion);
put_generic_request(req);
}
return;
@@ -718,7 +718,7 @@
monc->m_auth->front_max);
if (ret < 0) {
monc->client->auth_err = ret;
- wake_up(&monc->client->auth_wq);
+ wake_up_all(&monc->client->auth_wq);
} else if (ret > 0) {
__send_prepared_auth_request(monc, ret);
} else if (!was_auth && monc->auth->ops->is_authenticated(monc->auth)) {
diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c
index 92b7251..e385223 100644
--- a/fs/ceph/osd_client.c
+++ b/fs/ceph/osd_client.c
@@ -862,12 +862,12 @@
if (req->r_callback)
req->r_callback(req, msg);
else
- complete(&req->r_completion);
+ complete_all(&req->r_completion);
if (flags & CEPH_OSD_FLAG_ONDISK) {
if (req->r_safe_callback)
req->r_safe_callback(req, msg);
- complete(&req->r_safe_completion); /* fsync waiter */
+ complete_all(&req->r_safe_completion); /* fsync waiter */
}
done:
@@ -1083,7 +1083,7 @@
if (newmap)
kick_requests(osdc, NULL);
up_read(&osdc->map_sem);
- wake_up(&osdc->client->auth_wq);
+ wake_up_all(&osdc->client->auth_wq);
return;
bad:
diff --git a/fs/ceph/osdmap.c b/fs/ceph/osdmap.c
index 50ce64e..416d46a 100644
--- a/fs/ceph/osdmap.c
+++ b/fs/ceph/osdmap.c
@@ -568,6 +568,7 @@
if (ev > CEPH_PG_POOL_VERSION) {
pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
ev, CEPH_PG_POOL_VERSION);
+ kfree(pi);
goto bad;
}
__decode_pool(p, pi);
@@ -830,12 +831,13 @@
/* remove any? */
while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
node)->pgid, pgid) <= 0) {
- struct rb_node *cur = rbp;
+ struct ceph_pg_mapping *cur =
+ rb_entry(rbp, struct ceph_pg_mapping, node);
+
rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n",
- *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
- node)->pgid);
- rb_erase(cur, &map->pg_temp);
+ dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+ rb_erase(&cur->node, &map->pg_temp);
+ kfree(cur);
}
if (pglen) {
@@ -851,19 +853,22 @@
for (j = 0; j < pglen; j++)
pg->osds[j] = ceph_decode_32(p);
err = __insert_pg_mapping(pg, &map->pg_temp);
- if (err)
+ if (err) {
+ kfree(pg);
goto bad;
+ }
dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
pglen);
}
}
while (rbp) {
- struct rb_node *cur = rbp;
+ struct ceph_pg_mapping *cur =
+ rb_entry(rbp, struct ceph_pg_mapping, node);
+
rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n",
- *(u64 *)&rb_entry(cur, struct ceph_pg_mapping,
- node)->pgid);
- rb_erase(cur, &map->pg_temp);
+ dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
+ rb_erase(&cur->node, &map->pg_temp);
+ kfree(cur);
}
/* ignore the rest */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 484e52b..2cb1a70 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -923,7 +923,7 @@
goto out_unregister_filesystem;
#endif
#ifdef CONFIG_CIFS_DFS_UPCALL
- rc = register_key_type(&key_type_dns_resolver);
+ rc = cifs_init_dns_resolver();
if (rc)
goto out_unregister_key_type;
#endif
@@ -935,7 +935,7 @@
out_unregister_resolver_key:
#ifdef CONFIG_CIFS_DFS_UPCALL
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
out_unregister_key_type:
#endif
#ifdef CONFIG_CIFS_UPCALL
@@ -961,7 +961,7 @@
cifs_proc_clean();
#ifdef CONFIG_CIFS_DFS_UPCALL
cifs_dfs_release_automount_timer();
- unregister_key_type(&key_type_dns_resolver);
+ cifs_exit_dns_resolver();
#endif
#ifdef CONFIG_CIFS_UPCALL
unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 4db2c5e..49315cb 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -24,12 +24,16 @@
*/
#include <linux/slab.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
#include <keys/user-type.h>
#include "dns_resolve.h"
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
+static const struct cred *dns_resolver_cache;
+
/* Checks if supplied name is IP address
* returns:
* 1 - name is IP
@@ -94,6 +98,7 @@
int
dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
{
+ const struct cred *saved_cred;
int rc = -EAGAIN;
struct key *rkey = ERR_PTR(-EAGAIN);
char *name;
@@ -133,8 +138,15 @@
goto skip_upcall;
}
+ saved_cred = override_creds(dns_resolver_cache);
rkey = request_key(&key_type_dns_resolver, name, "");
+ revert_creds(saved_cred);
if (!IS_ERR(rkey)) {
+ if (!(rkey->perm & KEY_USR_VIEW)) {
+ down_read(&rkey->sem);
+ rkey->perm |= KEY_USR_VIEW;
+ up_read(&rkey->sem);
+ }
len = rkey->type_data.x[0];
data = rkey->payload.data;
} else {
@@ -165,4 +177,61 @@
return rc;
}
+int __init cifs_init_dns_resolver(void)
+{
+ struct cred *cred;
+ struct key *keyring;
+ int ret;
+ printk(KERN_NOTICE "Registering the %s key type\n",
+ key_type_dns_resolver.name);
+
+ /* create an override credential set with a special thread keyring in
+ * which DNS requests are cached
+ *
+ * this is used to prevent malicious redirections from being installed
+ * with add_key().
+ */
+ cred = prepare_kernel_cred(NULL);
+ if (!cred)
+ return -ENOMEM;
+
+ keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+ (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+ KEY_USR_VIEW | KEY_USR_READ,
+ KEY_ALLOC_NOT_IN_QUOTA);
+ if (IS_ERR(keyring)) {
+ ret = PTR_ERR(keyring);
+ goto failed_put_cred;
+ }
+
+ ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+ if (ret < 0)
+ goto failed_put_key;
+
+ ret = register_key_type(&key_type_dns_resolver);
+ if (ret < 0)
+ goto failed_put_key;
+
+ /* instruct request_key() to use this special keyring as a cache for
+ * the results it looks up */
+ cred->thread_keyring = keyring;
+ cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+ dns_resolver_cache = cred;
+ return 0;
+
+failed_put_key:
+ key_put(keyring);
+failed_put_cred:
+ put_cred(cred);
+ return ret;
+}
+
+void __exit cifs_exit_dns_resolver(void)
+{
+ key_revoke(dns_resolver_cache->thread_keyring);
+ unregister_key_type(&key_type_dns_resolver);
+ put_cred(dns_resolver_cache);
+ printk(KERN_NOTICE "Unregistered %s key type\n",
+ key_type_dns_resolver.name);
+}
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 966e928..26b9eaa 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,8 @@
#define _DNS_RESOLVE_H
#ifdef __KERNEL__
-#include <linux/key-type.h>
-extern struct key_type key_type_dns_resolver;
+extern int __init cifs_init_dns_resolver(void);
+extern void __exit cifs_exit_dns_resolver(void);
extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
#endif /* KERNEL */
diff --git a/fs/dcache.c b/fs/dcache.c
index c8c78ba..86d4db1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -896,7 +896,7 @@
*
* In this case we return -1 to tell the caller that we baled.
*/
-static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
if (!(gfp_mask & __GFP_FS))
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 2d8dbce..46c4dd8 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -31,9 +31,9 @@
static struct hlist_head *ecryptfs_daemon_hash;
struct mutex ecryptfs_daemon_hash_mux;
-static int ecryptfs_hash_buckets;
+static int ecryptfs_hash_bits;
#define ecryptfs_uid_hash(uid) \
- hash_long((unsigned long)uid, ecryptfs_hash_buckets)
+ hash_long((unsigned long)uid, ecryptfs_hash_bits)
static u32 ecryptfs_msg_counter;
static struct ecryptfs_msg_ctx *ecryptfs_msg_ctx_arr;
@@ -486,18 +486,19 @@
}
mutex_init(&ecryptfs_daemon_hash_mux);
mutex_lock(&ecryptfs_daemon_hash_mux);
- ecryptfs_hash_buckets = 1;
- while (ecryptfs_number_of_users >> ecryptfs_hash_buckets)
- ecryptfs_hash_buckets++;
+ ecryptfs_hash_bits = 1;
+ while (ecryptfs_number_of_users >> ecryptfs_hash_bits)
+ ecryptfs_hash_bits++;
ecryptfs_daemon_hash = kmalloc((sizeof(struct hlist_head)
- * ecryptfs_hash_buckets), GFP_KERNEL);
+ * (1 << ecryptfs_hash_bits)),
+ GFP_KERNEL);
if (!ecryptfs_daemon_hash) {
rc = -ENOMEM;
printk(KERN_ERR "%s: Failed to allocate memory\n", __func__);
mutex_unlock(&ecryptfs_daemon_hash_mux);
goto out;
}
- for (i = 0; i < ecryptfs_hash_buckets; i++)
+ for (i = 0; i < (1 << ecryptfs_hash_bits); i++)
INIT_HLIST_HEAD(&ecryptfs_daemon_hash[i]);
mutex_unlock(&ecryptfs_daemon_hash_mux);
ecryptfs_msg_ctx_arr = kmalloc((sizeof(struct ecryptfs_msg_ctx)
@@ -554,7 +555,7 @@
int i;
mutex_lock(&ecryptfs_daemon_hash_mux);
- for (i = 0; i < ecryptfs_hash_buckets; i++) {
+ for (i = 0; i < (1 << ecryptfs_hash_bits); i++) {
int rc;
hlist_for_each_entry(daemon, elem,
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 4a48c0f..84da64b 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1041,6 +1041,7 @@
if (gfs2_is_stuffed(ip)) {
u64 dsize = size + sizeof(struct gfs2_inode);
+ ip->i_disksize = size;
ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 8295c5b..6b48d7c 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -392,7 +392,7 @@
unsigned totlen = be16_to_cpu(dent->de_rec_len);
if (gfs2_dirent_sentinel(dent))
- actual = GFS2_DIRENT_SIZE(0);
+ actual = 0;
if (totlen - actual >= required)
return 1;
return 0;
@@ -1231,6 +1231,25 @@
return 0;
}
+static void *gfs2_alloc_sort_buffer(unsigned size)
+{
+ void *ptr = NULL;
+
+ if (size < KMALLOC_MAX_SIZE)
+ ptr = kmalloc(size, GFP_NOFS | __GFP_NOWARN);
+ if (!ptr)
+ ptr = __vmalloc(size, GFP_NOFS, PAGE_KERNEL);
+ return ptr;
+}
+
+static void gfs2_free_sort_buffer(void *ptr)
+{
+ if (is_vmalloc_addr(ptr))
+ vfree(ptr);
+ else
+ kfree(ptr);
+}
+
static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
filldir_t filldir, int *copied, unsigned *depth,
u64 leaf_no)
@@ -1271,7 +1290,7 @@
* 99 is the maximum number of entries that can fit in a single
* leaf block.
*/
- larr = vmalloc((leaves + entries + 99) * sizeof(void *));
+ larr = gfs2_alloc_sort_buffer((leaves + entries + 99) * sizeof(void *));
if (!larr)
goto out;
darr = (const struct gfs2_dirent **)(larr + leaves);
@@ -1282,7 +1301,7 @@
do {
error = get_leaf(ip, lfn, &bh);
if (error)
- goto out_kfree;
+ goto out_free;
lf = (struct gfs2_leaf *)bh->b_data;
lfn = be64_to_cpu(lf->lf_next);
if (lf->lf_entries) {
@@ -1291,7 +1310,7 @@
gfs2_dirent_gather, NULL, &g);
error = PTR_ERR(dent);
if (IS_ERR(dent))
- goto out_kfree;
+ goto out_free;
if (entries2 != g.offset) {
fs_warn(sdp, "Number of entries corrupt in dir "
"leaf %llu, entries2 (%u) != "
@@ -1300,7 +1319,7 @@
entries2, g.offset);
error = -EIO;
- goto out_kfree;
+ goto out_free;
}
error = 0;
larr[leaf++] = bh;
@@ -1312,10 +1331,10 @@
BUG_ON(entries2 != entries);
error = do_filldir_main(ip, offset, opaque, filldir, darr,
entries, copied);
-out_kfree:
+out_free:
for(i = 0; i < leaf; i++)
brelse(larr[i]);
- vfree(larr);
+ gfs2_free_sort_buffer(larr);
out:
return error;
}
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ddcdbf4..0898f3e 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -706,8 +706,18 @@
{
unsigned long delay = 0;
struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work);
+ struct gfs2_holder *gh;
int drop_ref = 0;
+ if (unlikely(test_bit(GLF_FROZEN, &gl->gl_flags))) {
+ spin_lock(&gl->gl_spin);
+ gh = find_first_waiter(gl);
+ if (gh && (gh->gh_flags & LM_FLAG_NOEXP) &&
+ test_and_clear_bit(GLF_FROZEN, &gl->gl_flags))
+ set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
+ spin_unlock(&gl->gl_spin);
+ }
+
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
finish_xmote(gl, gl->gl_reply);
drop_ref = 1;
@@ -1348,7 +1358,7 @@
}
-static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
+static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_glock *gl;
int may_demote;
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index b5612cb..f03afd9 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -169,7 +169,7 @@
{
struct inode *inode;
struct gfs2_inode *ip;
- struct gfs2_glock *io_gl;
+ struct gfs2_glock *io_gl = NULL;
int error;
inode = gfs2_iget(sb, no_addr);
@@ -198,6 +198,7 @@
ip->i_iopen_gh.gh_gl->gl_object = ip;
gfs2_glock_put(io_gl);
+ io_gl = NULL;
if ((type == DT_UNKNOWN) && (no_formal_ino == 0))
goto gfs2_nfsbypass;
@@ -228,7 +229,8 @@
fail_glock:
gfs2_glock_dq(&ip->i_iopen_gh);
fail_iopen:
- gfs2_glock_put(io_gl);
+ if (io_gl)
+ gfs2_glock_put(io_gl);
fail_put:
if (inode->i_state & I_NEW)
ip->i_gl->gl_object = NULL;
@@ -256,7 +258,7 @@
{
struct gfs2_sbd *sdp;
struct gfs2_inode *ip;
- struct gfs2_glock *io_gl;
+ struct gfs2_glock *io_gl = NULL;
int error;
struct gfs2_holder gh;
struct inode *inode;
@@ -293,6 +295,7 @@
ip->i_iopen_gh.gh_gl->gl_object = ip;
gfs2_glock_put(io_gl);
+ io_gl = NULL;
inode->i_mode = DT2IF(DT_UNKNOWN);
@@ -319,7 +322,8 @@
fail_glock:
gfs2_glock_dq(&ip->i_iopen_gh);
fail_iopen:
- gfs2_glock_put(io_gl);
+ if (io_gl)
+ gfs2_glock_put(io_gl);
fail_put:
ip->i_gl->gl_object = NULL;
gfs2_glock_put(ip->i_gl);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 49667d6..8f02d3d 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -77,7 +77,7 @@
static atomic_t qd_lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(qd_lru_lock);
-int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
+int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
struct gfs2_quota_data *qd;
struct gfs2_sbd *sdp;
@@ -694,10 +694,8 @@
if (!buffer_mapped(bh))
goto unlock_out;
/* If it's a newly allocated disk block for quota, zero it */
- if (buffer_new(bh)) {
- memset(bh->b_data, 0, bh->b_size);
- set_buffer_uptodate(bh);
- }
+ if (buffer_new(bh))
+ zero_user(page, pos - blocksize, bh->b_size);
}
if (PageUptodate(page))
@@ -723,7 +721,7 @@
/* If quota straddles page boundary, we need to update the rest of the
* quota at the beginning of the next page */
- if (offset != 0) { /* first page, offset is closer to PAGE_CACHE_SIZE */
+ if ((offset + sizeof(struct gfs2_quota)) > PAGE_CACHE_SIZE) {
ptr = ptr + nbytes;
nbytes = sizeof(struct gfs2_quota) - nbytes;
offset = 0;
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 195f60c..e7d236c 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -51,7 +51,7 @@
return ret;
}
-extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern int gfs2_shrink_qd_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask);
extern const struct quotactl_ops gfs2_quotactl_ops;
#endif /* __QUOTA_DOT_H__ */
diff --git a/fs/inode.c b/fs/inode.c
index 2bee20a..722860b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -512,7 +512,7 @@
* This function is passed the number of inodes to scan, and it returns the
* total number of remaining possibly-reclaimable inodes.
*/
-static int shrink_icache_memory(int nr, gfp_t gfp_mask)
+static int shrink_icache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
/*
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff59..0368808 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,7 +297,6 @@
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
- struct jbd2_buffer_trigger_type *triggers;
journal_t *journal = transaction->t_journal;
/*
@@ -328,21 +327,21 @@
done_copy_out = 1;
new_page = virt_to_page(jh_in->b_frozen_data);
new_offset = offset_in_page(jh_in->b_frozen_data);
- triggers = jh_in->b_frozen_triggers;
} else {
new_page = jh2bh(jh_in)->b_page;
new_offset = offset_in_page(jh2bh(jh_in)->b_data);
- triggers = jh_in->b_triggers;
}
mapped_data = kmap_atomic(new_page, KM_USER0);
/*
- * Fire any commit trigger. Do this before checking for escaping,
- * as the trigger may modify the magic offset. If a copy-out
- * happens afterwards, it will have the correct data in the buffer.
+ * Fire data frozen trigger if data already wasn't frozen. Do this
+ * before checking for escaping, as the trigger may modify the magic
+ * offset. If a copy-out happens afterwards, it will have the correct
+ * data in the buffer.
*/
- jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
- triggers);
+ if (!done_copy_out)
+ jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+ jh_in->b_triggers);
/*
* Check for escaping
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index e214d68..b8e0806 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -725,6 +725,9 @@
page = jh2bh(jh)->b_page;
offset = ((unsigned long) jh2bh(jh)->b_data) & ~PAGE_MASK;
source = kmap_atomic(page, KM_USER0);
+ /* Fire data frozen trigger just before we copy the data */
+ jbd2_buffer_frozen_trigger(jh, source + offset,
+ jh->b_triggers);
memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
kunmap_atomic(source, KM_USER0);
@@ -963,15 +966,15 @@
jh->b_triggers = type;
}
-void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
struct jbd2_buffer_trigger_type *triggers)
{
struct buffer_head *bh = jh2bh(jh);
- if (!triggers || !triggers->t_commit)
+ if (!triggers || !triggers->t_frozen)
return;
- triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+ triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
}
void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index a2d58c9..d258e26 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -626,7 +626,7 @@
static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
{
- /* success of check_xattr_ref_inode() means taht inode (ic) dose not have
+ /* success of check_xattr_ref_inode() means that inode (ic) dose not have
* duplicate name/value pairs. If duplicate name/value pair would be found,
* one will be removed.
*/
diff --git a/fs/mbcache.c b/fs/mbcache.c
index ec88ff3..e28f21b 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -115,7 +115,7 @@
* What the mbcache registers as to get shrunk dynamically.
*/
-static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask);
+static int mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
static struct shrinker mb_cache_shrinker = {
.shrink = mb_cache_shrink_fn,
@@ -191,13 +191,14 @@
* This function is called by the kernel memory management when memory
* gets low.
*
+ * @shrink: (ignored)
* @nr_to_scan: Number of objects to scan
* @gfp_mask: (ignored)
*
* Returns the number of objects which are present in the cache.
*/
static int
-mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask)
+mb_cache_shrink_fn(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free_list);
struct list_head *l, *ltmp;
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 782b431..e60416d 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1710,7 +1710,7 @@
}
}
-int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+int nfs_access_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(head);
struct nfs_inode *nfsi;
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index d8bd619..e70f44b 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -205,7 +205,8 @@
void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
/* dir.c */
-extern int nfs_access_cache_shrinker(int nr_to_scan, gfp_t gfp_mask);
+extern int nfs_access_cache_shrinker(struct shrinker *shrink,
+ int nr_to_scan, gfp_t gfp_mask);
/* inode.c */
extern struct workqueue_struct *nfsiod_workqueue;
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3623ca2..356e976 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -196,15 +196,14 @@
dump_stack();
goto bail;
}
-
- past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
- mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
- (unsigned long long)past_eof);
-
- if (create && (iblock >= past_eof))
- set_buffer_new(bh_result);
}
+ past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
+ mlog(0, "Inode %lu, past_eof = %llu\n", inode->i_ino,
+ (unsigned long long)past_eof);
+ if (create && (iblock >= past_eof))
+ set_buffer_new(bh_result);
+
bail:
if (err < 0)
err = -EIO;
@@ -459,36 +458,6 @@
return ret;
}
-handle_t *ocfs2_start_walk_page_trans(struct inode *inode,
- struct page *page,
- unsigned from,
- unsigned to)
-{
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- handle_t *handle;
- int ret = 0;
-
- handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
- if (IS_ERR(handle)) {
- ret = -ENOMEM;
- mlog_errno(ret);
- goto out;
- }
-
- if (ocfs2_should_order_data(inode)) {
- ret = ocfs2_jbd2_file_inode(handle, inode);
- if (ret < 0)
- mlog_errno(ret);
- }
-out:
- if (ret) {
- if (!IS_ERR(handle))
- ocfs2_commit_trans(osb, handle);
- handle = ERR_PTR(ret);
- }
- return handle;
-}
-
static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block)
{
sector_t status;
@@ -1131,23 +1100,37 @@
*/
static int ocfs2_grab_pages_for_write(struct address_space *mapping,
struct ocfs2_write_ctxt *wc,
- u32 cpos, loff_t user_pos, int new,
+ u32 cpos, loff_t user_pos,
+ unsigned user_len, int new,
struct page *mmap_page)
{
int ret = 0, i;
- unsigned long start, target_index, index;
+ unsigned long start, target_index, end_index, index;
struct inode *inode = mapping->host;
+ loff_t last_byte;
target_index = user_pos >> PAGE_CACHE_SHIFT;
/*
* Figure out how many pages we'll be manipulating here. For
* non allocating write, we just change the one
- * page. Otherwise, we'll need a whole clusters worth.
+ * page. Otherwise, we'll need a whole clusters worth. If we're
+ * writing past i_size, we only need enough pages to cover the
+ * last page of the write.
*/
if (new) {
wc->w_num_pages = ocfs2_pages_per_cluster(inode->i_sb);
start = ocfs2_align_clusters_to_page_index(inode->i_sb, cpos);
+ /*
+ * We need the index *past* the last page we could possibly
+ * touch. This is the page past the end of the write or
+ * i_size, whichever is greater.
+ */
+ last_byte = max(user_pos + user_len, i_size_read(inode));
+ BUG_ON(last_byte < 1);
+ end_index = ((last_byte - 1) >> PAGE_CACHE_SHIFT) + 1;
+ if ((start + wc->w_num_pages) > end_index)
+ wc->w_num_pages = end_index - start;
} else {
wc->w_num_pages = 1;
start = target_index;
@@ -1620,21 +1603,20 @@
* write path can treat it as an non-allocating write, which has no
* special case code for sparse/nonsparse files.
*/
-static int ocfs2_expand_nonsparse_inode(struct inode *inode, loff_t pos,
- unsigned len,
+static int ocfs2_expand_nonsparse_inode(struct inode *inode,
+ struct buffer_head *di_bh,
+ loff_t pos, unsigned len,
struct ocfs2_write_ctxt *wc)
{
int ret;
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
loff_t newsize = pos + len;
- if (ocfs2_sparse_alloc(osb))
- return 0;
+ BUG_ON(ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
if (newsize <= i_size_read(inode))
return 0;
- ret = ocfs2_extend_no_holes(inode, newsize, pos);
+ ret = ocfs2_extend_no_holes(inode, di_bh, newsize, pos);
if (ret)
mlog_errno(ret);
@@ -1644,6 +1626,18 @@
return ret;
}
+static int ocfs2_zero_tail(struct inode *inode, struct buffer_head *di_bh,
+ loff_t pos)
+{
+ int ret = 0;
+
+ BUG_ON(!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)));
+ if (pos > i_size_read(inode))
+ ret = ocfs2_zero_extend(inode, di_bh, pos);
+
+ return ret;
+}
+
int ocfs2_write_begin_nolock(struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata,
@@ -1679,7 +1673,11 @@
}
}
- ret = ocfs2_expand_nonsparse_inode(inode, pos, len, wc);
+ if (ocfs2_sparse_alloc(osb))
+ ret = ocfs2_zero_tail(inode, di_bh, pos);
+ else
+ ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
+ wc);
if (ret) {
mlog_errno(ret);
goto out;
@@ -1789,7 +1787,7 @@
* that we can zero and flush if we error after adding the
* extent.
*/
- ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
+ ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos, len,
cluster_of_pages, mmap_page);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6b5a492..153abb5 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1671,7 +1671,7 @@
struct dlm_ctxt *dlm = NULL;
struct dlm_ctxt *new_ctxt = NULL;
- if (strlen(domain) > O2NM_MAX_NAME_LEN) {
+ if (strlen(domain) >= O2NM_MAX_NAME_LEN) {
ret = -ENAMETOOLONG;
mlog(ML_ERROR, "domain name length too long\n");
goto leave;
@@ -1709,6 +1709,7 @@
}
if (dlm_protocol_compare(&dlm->fs_locking_proto, fs_proto)) {
+ spin_unlock(&dlm_domain_lock);
mlog(ML_ERROR,
"Requested locking protocol version is not "
"compatible with already registered domain "
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 4a7506a..94b97fc 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2808,14 +2808,8 @@
mlog(0, "trying again...\n");
goto again;
}
- /* now that we are sure the MIGRATING state is there, drop
- * the unneded state which blocked threads trying to DIRTY */
- spin_lock(&res->spinlock);
- BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
- BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
- res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
- spin_unlock(&res->spinlock);
+ ret = 0;
/* did the target go down or die? */
spin_lock(&dlm->spinlock);
if (!test_bit(target, dlm->domain_map)) {
@@ -2826,9 +2820,21 @@
spin_unlock(&dlm->spinlock);
/*
+ * if target is down, we need to clear DLM_LOCK_RES_BLOCK_DIRTY for
+ * another try; otherwise, we are sure the MIGRATING state is there,
+ * drop the unneded state which blocked threads trying to DIRTY
+ */
+ spin_lock(&res->spinlock);
+ BUG_ON(!(res->state & DLM_LOCK_RES_BLOCK_DIRTY));
+ res->state &= ~DLM_LOCK_RES_BLOCK_DIRTY;
+ if (!ret)
+ BUG_ON(!(res->state & DLM_LOCK_RES_MIGRATING));
+ spin_unlock(&res->spinlock);
+
+ /*
* at this point:
*
- * o the DLM_LOCK_RES_MIGRATING flag is set
+ * o the DLM_LOCK_RES_MIGRATING flag is set if target not down
* o there are no pending asts on this lockres
* o all processes trying to reserve an ast on this
* lockres must wait for the MIGRATING flag to clear
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index f8b75ce..9dfaac7 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -463,7 +463,7 @@
if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
int bit;
- bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES+1, 0);
+ bit = find_next_bit (dlm->recovery_map, O2NM_MAX_NODES, 0);
if (bit >= O2NM_MAX_NODES || bit < 0)
dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
else
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 6a13ea6..2b10b36 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -724,28 +724,55 @@
return status;
}
+/*
+ * While a write will already be ordering the data, a truncate will not.
+ * Thus, we need to explicitly order the zeroed pages.
+ */
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+{
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ handle_t *handle = NULL;
+ int ret = 0;
+
+ if (!ocfs2_should_order_data(inode))
+ goto out;
+
+ handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = -ENOMEM;
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_jbd2_file_inode(handle, inode);
+ if (ret < 0)
+ mlog_errno(ret);
+
+out:
+ if (ret) {
+ if (!IS_ERR(handle))
+ ocfs2_commit_trans(osb, handle);
+ handle = ERR_PTR(ret);
+ }
+ return handle;
+}
+
/* Some parts of this taken from generic_cont_expand, which turned out
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
-static int ocfs2_write_zero_page(struct inode *inode,
- u64 size)
+static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
+ u64 abs_to)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
- unsigned long index;
- unsigned int offset;
+ unsigned long index = abs_from >> PAGE_CACHE_SHIFT;
handle_t *handle = NULL;
- int ret;
+ int ret = 0;
+ unsigned zero_from, zero_to, block_start, block_end;
- offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
- /* ugh. in prepare/commit_write, if from==to==start of block, we
- ** skip the prepare. make sure we never send an offset for the start
- ** of a block
- */
- if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
- offset++;
- }
- index = size >> PAGE_CACHE_SHIFT;
+ BUG_ON(abs_from >= abs_to);
+ BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
+ BUG_ON(abs_from & (inode->i_blkbits - 1));
page = grab_cache_page(mapping, index);
if (!page) {
@@ -754,31 +781,56 @@
goto out;
}
- ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
+ /* Get the offsets within the page that we want to zero */
+ zero_from = abs_from & (PAGE_CACHE_SIZE - 1);
+ zero_to = abs_to & (PAGE_CACHE_SIZE - 1);
+ if (!zero_to)
+ zero_to = PAGE_CACHE_SIZE;
- if (ocfs2_should_order_data(inode)) {
- handle = ocfs2_start_walk_page_trans(inode, page, offset,
- offset);
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- handle = NULL;
+ mlog(0,
+ "abs_from = %llu, abs_to = %llu, index = %lu, zero_from = %u, zero_to = %u\n",
+ (unsigned long long)abs_from, (unsigned long long)abs_to,
+ index, zero_from, zero_to);
+
+ /* We know that zero_from is block aligned */
+ for (block_start = zero_from; block_start < zero_to;
+ block_start = block_end) {
+ block_end = block_start + (1 << inode->i_blkbits);
+
+ /*
+ * block_start is block-aligned. Bump it by one to
+ * force ocfs2_{prepare,commit}_write() to zero the
+ * whole block.
+ */
+ ret = ocfs2_prepare_write_nolock(inode, page,
+ block_start + 1,
+ block_start + 1);
+ if (ret < 0) {
+ mlog_errno(ret);
goto out_unlock;
}
- }
- /* must not update i_size! */
- ret = block_commit_write(page, offset, offset);
- if (ret < 0)
- mlog_errno(ret);
- else
- ret = 0;
+ if (!handle) {
+ handle = ocfs2_zero_start_ordered_transaction(inode);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ handle = NULL;
+ break;
+ }
+ }
+
+ /* must not update i_size! */
+ ret = block_commit_write(page, block_start + 1,
+ block_start + 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else
+ ret = 0;
+ }
if (handle)
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+
out_unlock:
unlock_page(page);
page_cache_release(page);
@@ -786,22 +838,114 @@
return ret;
}
-static int ocfs2_zero_extend(struct inode *inode,
- u64 zero_to_size)
+/*
+ * Find the next range to zero. We do this in terms of bytes because
+ * that's what ocfs2_zero_extend() wants, and it is dealing with the
+ * pagecache. We may return multiple extents.
+ *
+ * zero_start and zero_end are ocfs2_zero_extend()s current idea of what
+ * needs to be zeroed. range_start and range_end return the next zeroing
+ * range. A subsequent call should pass the previous range_end as its
+ * zero_start. If range_end is 0, there's nothing to do.
+ *
+ * Unwritten extents are skipped over. Refcounted extents are CoWd.
+ */
+static int ocfs2_zero_extend_get_range(struct inode *inode,
+ struct buffer_head *di_bh,
+ u64 zero_start, u64 zero_end,
+ u64 *range_start, u64 *range_end)
{
- int ret = 0;
- u64 start_off;
- struct super_block *sb = inode->i_sb;
+ int rc = 0, needs_cow = 0;
+ u32 p_cpos, zero_clusters = 0;
+ u32 zero_cpos =
+ zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+ u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end);
+ unsigned int num_clusters = 0;
+ unsigned int ext_flags = 0;
- start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
- while (start_off < zero_to_size) {
- ret = ocfs2_write_zero_page(inode, start_off);
- if (ret < 0) {
- mlog_errno(ret);
+ while (zero_cpos < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos,
+ &num_clusters, &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
goto out;
}
- start_off += sb->s_blocksize;
+ if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) {
+ zero_clusters = num_clusters;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ break;
+ }
+
+ zero_cpos += num_clusters;
+ }
+ if (!zero_clusters) {
+ *range_end = 0;
+ goto out;
+ }
+
+ while ((zero_cpos + zero_clusters) < last_cpos) {
+ rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters,
+ &p_cpos, &num_clusters,
+ &ext_flags);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+
+ if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN))
+ break;
+ if (ext_flags & OCFS2_EXT_REFCOUNTED)
+ needs_cow = 1;
+ zero_clusters += num_clusters;
+ }
+ if ((zero_cpos + zero_clusters) > last_cpos)
+ zero_clusters = last_cpos - zero_cpos;
+
+ if (needs_cow) {
+ rc = ocfs2_refcount_cow(inode, di_bh, zero_cpos, zero_clusters,
+ UINT_MAX);
+ if (rc) {
+ mlog_errno(rc);
+ goto out;
+ }
+ }
+
+ *range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos);
+ *range_end = ocfs2_clusters_to_bytes(inode->i_sb,
+ zero_cpos + zero_clusters);
+
+out:
+ return rc;
+}
+
+/*
+ * Zero one range returned from ocfs2_zero_extend_get_range(). The caller
+ * has made sure that the entire range needs zeroing.
+ */
+static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
+ u64 range_end)
+{
+ int rc = 0;
+ u64 next_pos;
+ u64 zero_pos = range_start;
+
+ mlog(0, "range_start = %llu, range_end = %llu\n",
+ (unsigned long long)range_start,
+ (unsigned long long)range_end);
+ BUG_ON(range_start >= range_end);
+
+ while (zero_pos < range_end) {
+ next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
+ if (next_pos > range_end)
+ next_pos = range_end;
+ rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+ if (rc < 0) {
+ mlog_errno(rc);
+ break;
+ }
+ zero_pos = next_pos;
/*
* Very large extends have the potential to lock up
@@ -810,16 +954,63 @@
cond_resched();
}
-out:
+ return rc;
+}
+
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to_size)
+{
+ int ret = 0;
+ u64 zero_start, range_start = 0, range_end = 0;
+ struct super_block *sb = inode->i_sb;
+
+ zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
+ mlog(0, "zero_start %llu for i_size %llu\n",
+ (unsigned long long)zero_start,
+ (unsigned long long)i_size_read(inode));
+ while (zero_start < zero_to_size) {
+ ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start,
+ zero_to_size,
+ &range_start,
+ &range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ if (!range_end)
+ break;
+ /* Trim the ends */
+ if (range_start < zero_start)
+ range_start = zero_start;
+ if (range_end > zero_to_size)
+ range_end = zero_to_size;
+
+ ret = ocfs2_zero_extend_range(inode, range_start,
+ range_end);
+ if (ret) {
+ mlog_errno(ret);
+ break;
+ }
+ zero_start = range_end;
+ }
+
return ret;
}
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to)
{
int ret;
u32 clusters_to_add;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ /*
+ * Only quota files call this without a bh, and they can't be
+ * refcounted.
+ */
+ BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL));
+ BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE));
+
clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
if (clusters_to_add < oi->ip_clusters)
clusters_to_add = 0;
@@ -840,7 +1031,7 @@
* still need to zero the area between the old i_size and the
* new i_size.
*/
- ret = ocfs2_zero_extend(inode, zero_to);
+ ret = ocfs2_zero_extend(inode, di_bh, zero_to);
if (ret < 0)
mlog_errno(ret);
@@ -862,27 +1053,15 @@
goto out;
if (i_size_read(inode) == new_i_size)
- goto out;
+ goto out;
BUG_ON(new_i_size < i_size_read(inode));
/*
- * Fall through for converting inline data, even if the fs
- * supports sparse files.
- *
- * The check for inline data here is legal - nobody can add
- * the feature since we have i_mutex. We must check it again
- * after acquiring ip_alloc_sem though, as paths like mmap
- * might have raced us to converting the inode to extents.
- */
- if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
- && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- goto out_update_size;
-
- /*
* The alloc sem blocks people in read/write from reading our
* allocation until we're done changing it. We depend on
* i_mutex to block other extend/truncate calls while we're
- * here.
+ * here. We even have to hold it for sparse files because there
+ * might be some tail zeroing.
*/
down_write(&oi->ip_alloc_sem);
@@ -899,14 +1078,16 @@
ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
if (ret) {
up_write(&oi->ip_alloc_sem);
-
mlog_errno(ret);
goto out;
}
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
- ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
+ if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+ ret = ocfs2_zero_extend(inode, di_bh, new_i_size);
+ else
+ ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size,
+ new_i_size);
up_write(&oi->ip_alloc_sem);
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index d66cf4f..97bf761 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -54,8 +54,10 @@
int ocfs2_simple_size_update(struct inode *inode,
struct buffer_head *di_bh,
u64 new_i_size);
-int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size,
- u64 zero_to);
+int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh,
+ u64 new_i_size, u64 zero_to);
+int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
+ loff_t zero_to);
int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 47878cf..625de9d 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -472,7 +472,7 @@
return container_of(triggers, struct ocfs2_triggers, ot_triggers);
}
-static void ocfs2_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -491,7 +491,7 @@
* Quota blocks have their own trigger because the struct ocfs2_block_check
* offset depends on the blocksize.
*/
-static void ocfs2_dq_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_dq_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -511,7 +511,7 @@
* Directory blocks also have their own trigger because the
* struct ocfs2_block_check offset depends on the blocksize.
*/
-static void ocfs2_db_commit_trigger(struct jbd2_buffer_trigger_type *triggers,
+static void ocfs2_db_frozen_trigger(struct jbd2_buffer_trigger_type *triggers,
struct buffer_head *bh,
void *data, size_t size)
{
@@ -544,7 +544,7 @@
static struct ocfs2_triggers di_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dinode, i_check),
@@ -552,7 +552,7 @@
static struct ocfs2_triggers eb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_extent_block, h_check),
@@ -560,7 +560,7 @@
static struct ocfs2_triggers rb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_refcount_block, rf_check),
@@ -568,7 +568,7 @@
static struct ocfs2_triggers gd_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_group_desc, bg_check),
@@ -576,14 +576,14 @@
static struct ocfs2_triggers db_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_db_commit_trigger,
+ .t_frozen = ocfs2_db_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers xb_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_xattr_block, xb_check),
@@ -591,14 +591,14 @@
static struct ocfs2_triggers dq_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_dq_commit_trigger,
+ .t_frozen = ocfs2_dq_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
};
static struct ocfs2_triggers dr_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_root_block, dr_check),
@@ -606,7 +606,7 @@
static struct ocfs2_triggers dl_triggers = {
.ot_triggers = {
- .t_commit = ocfs2_commit_trigger,
+ .t_frozen = ocfs2_frozen_trigger,
.t_abort = ocfs2_abort_trigger,
},
.ot_offset = offsetof(struct ocfs2_dx_leaf, dl_check),
@@ -1936,7 +1936,7 @@
mutex_lock(&os->os_lock);
ocfs2_queue_orphan_scan(osb);
if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
- schedule_delayed_work(&os->os_orphan_scan_work,
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
ocfs2_orphan_scan_timeout());
mutex_unlock(&os->os_lock);
}
@@ -1976,8 +1976,8 @@
atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
else {
atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
- schedule_delayed_work(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_timeout());
+ queue_delayed_work(ocfs2_wq, &os->os_orphan_scan_work,
+ ocfs2_orphan_scan_timeout());
}
}
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index 3d74196..ec6adbf 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -118,6 +118,7 @@
{
unsigned int la_mb;
unsigned int gd_mb;
+ unsigned int la_max_mb;
unsigned int megs_per_slot;
struct super_block *sb = osb->sb;
@@ -182,6 +183,12 @@
if (megs_per_slot < la_mb)
la_mb = megs_per_slot;
+ /* We can't store more bits than we can in a block. */
+ la_max_mb = ocfs2_clusters_to_megabytes(osb->sb,
+ ocfs2_local_alloc_size(sb) * 8);
+ if (la_mb > la_max_mb)
+ la_mb = la_max_mb;
+
return la_mb;
}
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 2bb35fe..4607923 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -775,7 +775,7 @@
* locking allocators ranks above a transaction start
*/
WARN_ON(journal_current_handle());
- status = ocfs2_extend_no_holes(gqinode,
+ status = ocfs2_extend_no_holes(gqinode, NULL,
gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
gqinode->i_size);
if (status < 0)
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 8bd70d4..dc78764 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -971,7 +971,7 @@
u64 p_blkno;
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + 2 * sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
@@ -1114,7 +1114,7 @@
return ocfs2_local_quota_add_chunk(sb, type, offset);
/* We are protected by dqio_sem so no locking needed */
- status = ocfs2_extend_no_holes(lqinode,
+ status = ocfs2_extend_no_holes(lqinode, NULL,
lqinode->i_size + sb->s_blocksize,
lqinode->i_size);
if (status < 0) {
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 4793f36..3ac5aa7 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2931,6 +2931,12 @@
offset = ((loff_t)cpos) << OCFS2_SB(sb)->s_clustersize_bits;
end = offset + (new_len << OCFS2_SB(sb)->s_clustersize_bits);
+ /*
+ * We only duplicate pages until we reach the page contains i_size - 1.
+ * So trim 'end' to i_size.
+ */
+ if (end > i_size_read(context->inode))
+ end = i_size_read(context->inode);
while (offset < end) {
page_index = offset >> PAGE_CACHE_SHIFT;
@@ -4166,6 +4172,12 @@
struct inode *inode = old_dentry->d_inode;
struct buffer_head *new_bh = NULL;
+ if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) {
+ ret = -EINVAL;
+ mlog_errno(ret);
+ goto out;
+ }
+
ret = filemap_fdatawrite(inode->i_mapping);
if (ret) {
mlog_errno(ret);
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f4c2a9e..a8e6a95 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -741,7 +741,7 @@
le16_to_cpu(bg->bg_free_bits_count));
le32_add_cpu(&cl->cl_recs[alloc_rec].c_total,
le16_to_cpu(bg->bg_bits));
- cl->cl_recs[alloc_rec].c_blkno = cpu_to_le64(bg->bg_blkno);
+ cl->cl_recs[alloc_rec].c_blkno = bg->bg_blkno;
if (le16_to_cpu(cl->cl_next_free_rec) < le16_to_cpu(cl->cl_count))
le16_add_cpu(&cl->cl_next_free_rec, 1);
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e97b348..d03469f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -709,7 +709,7 @@
struct ocfs2_xattr_value_buf *vb,
struct ocfs2_xattr_set_ctxt *ctxt)
{
- int status = 0;
+ int status = 0, credits;
handle_t *handle = ctxt->handle;
enum ocfs2_alloc_restarted why;
u32 prev_clusters, logical_start = le32_to_cpu(vb->vb_xv->xr_clusters);
@@ -719,39 +719,55 @@
ocfs2_init_xattr_value_extent_tree(&et, INODE_CACHE(inode), vb);
- status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
+ while (clusters_to_add) {
+ status = vb->vb_access(handle, INODE_CACHE(inode), vb->vb_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ break;
+ }
+
+ prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
+ status = ocfs2_add_clusters_in_btree(handle,
+ &et,
+ &logical_start,
+ clusters_to_add,
+ 0,
+ ctxt->data_ac,
+ ctxt->meta_ac,
+ &why);
+ if ((status < 0) && (status != -EAGAIN)) {
+ if (status != -ENOSPC)
+ mlog_errno(status);
+ break;
+ }
+
+ ocfs2_journal_dirty(handle, vb->vb_bh);
+
+ clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) -
+ prev_clusters;
+
+ if (why != RESTART_NONE && clusters_to_add) {
+ /*
+ * We can only fail in case the alloc file doesn't give
+ * up enough clusters.
+ */
+ BUG_ON(why == RESTART_META);
+
+ mlog(0, "restarting xattr value extension for %u"
+ " clusters,.\n", clusters_to_add);
+ credits = ocfs2_calc_extend_credits(inode->i_sb,
+ &vb->vb_xv->xr_list,
+ clusters_to_add);
+ status = ocfs2_extend_trans(handle, credits);
+ if (status < 0) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ break;
+ }
+ }
}
- prev_clusters = le32_to_cpu(vb->vb_xv->xr_clusters);
- status = ocfs2_add_clusters_in_btree(handle,
- &et,
- &logical_start,
- clusters_to_add,
- 0,
- ctxt->data_ac,
- ctxt->meta_ac,
- &why);
- if (status < 0) {
- mlog_errno(status);
- goto leave;
- }
-
- ocfs2_journal_dirty(handle, vb->vb_bh);
-
- clusters_to_add -= le32_to_cpu(vb->vb_xv->xr_clusters) - prev_clusters;
-
- /*
- * We should have already allocated enough space before the transaction,
- * so no need to restart.
- */
- BUG_ON(why != RESTART_NONE || clusters_to_add);
-
-leave:
-
return status;
}
@@ -6788,16 +6804,15 @@
return ret;
}
-static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+static int ocfs2_reflink_xattr_bucket(handle_t *handle,
u64 blkno, u64 new_blkno, u32 clusters,
+ u32 *cpos, int num_buckets,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_reflink_xattr_tree_args *args)
{
int i, j, ret = 0;
struct super_block *sb = args->reflink->old_inode->i_sb;
- u32 bpc = ocfs2_xattr_buckets_per_cluster(OCFS2_SB(sb));
- u32 num_buckets = clusters * bpc;
int bpb = args->old_bucket->bu_blocks;
struct ocfs2_xattr_value_buf vb = {
.vb_access = ocfs2_journal_access,
@@ -6816,14 +6831,6 @@
break;
}
- /*
- * The real bucket num in this series of blocks is stored
- * in the 1st bucket.
- */
- if (i == 0)
- num_buckets = le16_to_cpu(
- bucket_xh(args->old_bucket)->xh_num_buckets);
-
ret = ocfs2_xattr_bucket_journal_access(handle,
args->new_bucket,
OCFS2_JOURNAL_ACCESS_CREATE);
@@ -6837,6 +6844,18 @@
bucket_block(args->old_bucket, j),
sb->s_blocksize);
+ /*
+ * Record the start cpos so that we can use it to initialize
+ * our xattr tree we also set the xh_num_bucket for the new
+ * bucket.
+ */
+ if (i == 0) {
+ *cpos = le32_to_cpu(bucket_xh(args->new_bucket)->
+ xh_entries[0].xe_name_hash);
+ bucket_xh(args->new_bucket)->xh_num_buckets =
+ cpu_to_le16(num_buckets);
+ }
+
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
ret = ocfs2_reflink_xattr_header(handle, args->reflink,
@@ -6866,6 +6885,7 @@
}
ocfs2_xattr_bucket_journal_dirty(handle, args->new_bucket);
+
ocfs2_xattr_bucket_relse(args->old_bucket);
ocfs2_xattr_bucket_relse(args->new_bucket);
}
@@ -6874,6 +6894,75 @@
ocfs2_xattr_bucket_relse(args->new_bucket);
return ret;
}
+
+static int ocfs2_reflink_xattr_buckets(handle_t *handle,
+ struct inode *inode,
+ struct ocfs2_reflink_xattr_tree_args *args,
+ struct ocfs2_extent_tree *et,
+ struct ocfs2_alloc_context *meta_ac,
+ struct ocfs2_alloc_context *data_ac,
+ u64 blkno, u32 cpos, u32 len)
+{
+ int ret, first_inserted = 0;
+ u32 p_cluster, num_clusters, reflink_cpos = 0;
+ u64 new_blkno;
+ unsigned int num_buckets, reflink_buckets;
+ unsigned int bpc =
+ ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb));
+
+ ret = ocfs2_read_xattr_bucket(args->old_bucket, blkno);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ num_buckets = le16_to_cpu(bucket_xh(args->old_bucket)->xh_num_buckets);
+ ocfs2_xattr_bucket_relse(args->old_bucket);
+
+ while (len && num_buckets) {
+ ret = ocfs2_claim_clusters(handle, data_ac,
+ 1, &p_cluster, &num_clusters);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ new_blkno = ocfs2_clusters_to_blocks(inode->i_sb, p_cluster);
+ reflink_buckets = min(num_buckets, bpc * num_clusters);
+
+ ret = ocfs2_reflink_xattr_bucket(handle, blkno,
+ new_blkno, num_clusters,
+ &reflink_cpos, reflink_buckets,
+ meta_ac, data_ac, args);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ /*
+ * For the 1st allocated cluster, we make it use the same cpos
+ * so that the xattr tree looks the same as the original one
+ * in the most case.
+ */
+ if (!first_inserted) {
+ reflink_cpos = cpos;
+ first_inserted = 1;
+ }
+ ret = ocfs2_insert_extent(handle, et, reflink_cpos, new_blkno,
+ num_clusters, 0, meta_ac);
+ if (ret)
+ mlog_errno(ret);
+
+ mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
+ (unsigned long long)new_blkno, num_clusters, reflink_cpos);
+
+ len -= num_clusters;
+ blkno += ocfs2_clusters_to_blocks(inode->i_sb, num_clusters);
+ num_buckets -= reflink_buckets;
+ }
+out:
+ return ret;
+}
+
/*
* Create the same xattr extent record in the new inode's xattr tree.
*/
@@ -6885,8 +6974,6 @@
void *para)
{
int ret, credits = 0;
- u32 p_cluster, num_clusters;
- u64 new_blkno;
handle_t *handle;
struct ocfs2_reflink_xattr_tree_args *args =
(struct ocfs2_reflink_xattr_tree_args *)para;
@@ -6895,6 +6982,9 @@
struct ocfs2_alloc_context *data_ac = NULL;
struct ocfs2_extent_tree et;
+ mlog(0, "reflink xattr buckets %llu len %u\n",
+ (unsigned long long)blkno, len);
+
ocfs2_init_xattr_tree_extent_tree(&et,
INODE_CACHE(args->reflink->new_inode),
args->new_blk_bh);
@@ -6914,32 +7004,12 @@
goto out;
}
- ret = ocfs2_claim_clusters(handle, data_ac,
- len, &p_cluster, &num_clusters);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- new_blkno = ocfs2_clusters_to_blocks(osb->sb, p_cluster);
-
- mlog(0, "reflink xattr buckets %llu to %llu, len %u\n",
- (unsigned long long)blkno, (unsigned long long)new_blkno, len);
- ret = ocfs2_reflink_xattr_buckets(handle, blkno, new_blkno, len,
- meta_ac, data_ac, args);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
- }
-
- mlog(0, "insert new xattr extent rec start %llu len %u to %u\n",
- (unsigned long long)new_blkno, len, cpos);
- ret = ocfs2_insert_extent(handle, &et, cpos, new_blkno,
- len, 0, meta_ac);
+ ret = ocfs2_reflink_xattr_buckets(handle, inode, args, &et,
+ meta_ac, data_ac,
+ blkno, cpos, len);
if (ret)
mlog_errno(ret);
-out_commit:
ocfs2_commit_trans(osb, handle);
out:
diff --git a/fs/partitions/ibm.c b/fs/partitions/ibm.c
index 3e73de5..fc84976 100644
--- a/fs/partitions/ibm.c
+++ b/fs/partitions/ibm.c
@@ -74,6 +74,7 @@
} *label;
unsigned char *data;
Sector sect;
+ sector_t labelsect;
res = 0;
blocksize = bdev_logical_block_size(bdev);
@@ -98,10 +99,19 @@
goto out_freeall;
/*
+ * Special case for FBA disks: label sector does not depend on
+ * blocksize.
+ */
+ if ((info->cu_type == 0x6310 && info->dev_type == 0x9336) ||
+ (info->cu_type == 0x3880 && info->dev_type == 0x3370))
+ labelsect = info->label_block;
+ else
+ labelsect = info->label_block * (blocksize >> 9);
+
+ /*
* Get volume label, extract name and type.
*/
- data = read_part_sector(state, info->label_block*(blocksize/512),
- §);
+ data = read_part_sector(state, labelsect, §);
if (data == NULL)
goto out_readerr;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 12c233d..437d2ca 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -676,7 +676,7 @@
* This is called from kswapd when we think we need some
* more memory
*/
-static int shrink_dqcache_memory(int nr, gfp_t gfp_mask)
+static int shrink_dqcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
if (nr) {
spin_lock(&dq_list_lock);
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index f71246b..a7ac78f 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -28,6 +28,7 @@
struct sysfs_dirent *target_sd = NULL;
struct sysfs_dirent *sd = NULL;
struct sysfs_addrm_cxt acxt;
+ enum kobj_ns_type ns_type;
int error;
BUG_ON(!name);
@@ -58,16 +59,29 @@
if (!sd)
goto out_put;
- if (sysfs_ns_type(parent_sd))
+ ns_type = sysfs_ns_type(parent_sd);
+ if (ns_type)
sd->s_ns = target->ktype->namespace(target);
sd->s_symlink.target_sd = target_sd;
target_sd = NULL; /* reference is now owned by the symlink */
sysfs_addrm_start(&acxt, parent_sd);
- if (warn)
- error = sysfs_add_one(&acxt, sd);
- else
- error = __sysfs_add_one(&acxt, sd);
+ /* Symlinks must be between directories with the same ns_type */
+ if (!ns_type ||
+ (ns_type == sysfs_ns_type(sd->s_symlink.target_sd->s_parent))) {
+ if (warn)
+ error = sysfs_add_one(&acxt, sd);
+ else
+ error = __sysfs_add_one(&acxt, sd);
+ } else {
+ error = -EINVAL;
+ WARN(1, KERN_WARNING
+ "sysfs: symlink across ns_types %s/%s -> %s/%s\n",
+ parent_sd->s_name,
+ sd->s_name,
+ sd->s_symlink.target_sd->s_parent->s_name,
+ sd->s_symlink.target_sd->s_name);
+ }
sysfs_addrm_finish(&acxt);
if (error)
@@ -122,7 +136,7 @@
{
const void *ns = NULL;
spin_lock(&sysfs_assoc_lock);
- if (targ->sd)
+ if (targ->sd && sysfs_ns_type(kobj->sd))
ns = targ->sd->s_ns;
spin_unlock(&sysfs_assoc_lock);
sysfs_hash_and_remove(kobj->sd, ns, name);
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index 02feb59..0b20111 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -277,7 +277,7 @@
return 0;
}
-int ubifs_shrinker(int nr, gfp_t gfp_mask)
+int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask)
{
int freed, contention = 0;
long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 2eef553..0431087 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1575,7 +1575,7 @@
int ubifs_tnc_end_commit(struct ubifs_info *c);
/* shrinker.c */
-int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask);
+int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask);
/* commit.c */
int ubifs_bg_thread(void *info);
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 649ade8..2ee3f7a 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -45,7 +45,7 @@
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
-STATIC int xfsbufd_wakeup(int, gfp_t);
+STATIC int xfsbufd_wakeup(struct shrinker *, int, gfp_t);
STATIC void xfs_buf_delwri_queue(xfs_buf_t *, int);
static struct shrinker xfs_buf_shake = {
.shrink = xfsbufd_wakeup,
@@ -340,7 +340,7 @@
__func__, gfp_mask);
XFS_STATS_INC(xb_page_retries);
- xfsbufd_wakeup(0, gfp_mask);
+ xfsbufd_wakeup(NULL, 0, gfp_mask);
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
@@ -1762,6 +1762,7 @@
STATIC int
xfsbufd_wakeup(
+ struct shrinker *shrink,
int priority,
gfp_t mask)
{
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index f2d1718..80938c7 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1883,7 +1883,6 @@
goto out_cleanup_procfs;
vfs_initquota();
- xfs_inode_shrinker_init();
error = register_filesystem(&xfs_fs_type);
if (error)
@@ -1911,7 +1910,6 @@
{
vfs_exitquota();
unregister_filesystem(&xfs_fs_type);
- xfs_inode_shrinker_destroy();
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index ef7f021..a51a07c 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -144,6 +144,41 @@
return last_error;
}
+/*
+ * Select the next per-ag structure to iterate during the walk. The reclaim
+ * walk is optimised only to walk AGs with reclaimable inodes in them.
+ */
+static struct xfs_perag *
+xfs_inode_ag_iter_next_pag(
+ struct xfs_mount *mp,
+ xfs_agnumber_t *first,
+ int tag)
+{
+ struct xfs_perag *pag = NULL;
+
+ if (tag == XFS_ICI_RECLAIM_TAG) {
+ int found;
+ int ref;
+
+ spin_lock(&mp->m_perag_lock);
+ found = radix_tree_gang_lookup_tag(&mp->m_perag_tree,
+ (void **)&pag, *first, 1, tag);
+ if (found <= 0) {
+ spin_unlock(&mp->m_perag_lock);
+ return NULL;
+ }
+ *first = pag->pag_agno + 1;
+ /* open coded pag reference increment */
+ ref = atomic_inc_return(&pag->pag_ref);
+ spin_unlock(&mp->m_perag_lock);
+ trace_xfs_perag_get_reclaim(mp, pag->pag_agno, ref, _RET_IP_);
+ } else {
+ pag = xfs_perag_get(mp, *first);
+ (*first)++;
+ }
+ return pag;
+}
+
int
xfs_inode_ag_iterator(
struct xfs_mount *mp,
@@ -154,16 +189,15 @@
int exclusive,
int *nr_to_scan)
{
+ struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
int nr;
nr = nr_to_scan ? *nr_to_scan : INT_MAX;
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
- struct xfs_perag *pag;
-
- pag = xfs_perag_get(mp, ag);
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag, tag))) {
error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
exclusive, &nr);
xfs_perag_put(pag);
@@ -640,6 +674,17 @@
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
+
+ if (!pag->pag_ici_reclaimable) {
+ /* propagate the reclaim tag up into the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_set(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
pag->pag_ici_reclaimable++;
}
@@ -674,6 +719,16 @@
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
pag->pag_ici_reclaimable--;
+ if (!pag->pag_ici_reclaimable) {
+ /* clear the reclaim tag from the perag radix tree */
+ spin_lock(&ip->i_mount->m_perag_lock);
+ radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
+ XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
+ XFS_ICI_RECLAIM_TAG);
+ spin_unlock(&ip->i_mount->m_perag_lock);
+ trace_xfs_perag_clear_reclaim(ip->i_mount, pag->pag_agno,
+ -1, _RET_IP_);
+ }
}
/*
@@ -828,83 +883,52 @@
/*
* Shrinker infrastructure.
- *
- * This is all far more complex than it needs to be. It adds a global list of
- * mounts because the shrinkers can only call a global context. We need to make
- * the shrinkers pass a context to avoid the need for global state.
*/
-static LIST_HEAD(xfs_mount_list);
-static struct rw_semaphore xfs_mount_list_lock;
-
static int
xfs_reclaim_inode_shrink(
+ struct shrinker *shrink,
int nr_to_scan,
gfp_t gfp_mask)
{
struct xfs_mount *mp;
struct xfs_perag *pag;
xfs_agnumber_t ag;
- int reclaimable = 0;
+ int reclaimable;
+ mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
if (nr_to_scan) {
if (!(gfp_mask & __GFP_FS))
return -1;
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+ xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
- if (nr_to_scan <= 0)
- break;
- }
- up_read(&xfs_mount_list_lock);
- }
+ /* if we don't exhaust the scan, don't bother coming back */
+ if (nr_to_scan > 0)
+ return -1;
+ }
- down_read(&xfs_mount_list_lock);
- list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
- for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
- pag = xfs_perag_get(mp, ag);
- reclaimable += pag->pag_ici_reclaimable;
- xfs_perag_put(pag);
- }
+ reclaimable = 0;
+ ag = 0;
+ while ((pag = xfs_inode_ag_iter_next_pag(mp, &ag,
+ XFS_ICI_RECLAIM_TAG))) {
+ reclaimable += pag->pag_ici_reclaimable;
+ xfs_perag_put(pag);
}
- up_read(&xfs_mount_list_lock);
return reclaimable;
}
-static struct shrinker xfs_inode_shrinker = {
- .shrink = xfs_reclaim_inode_shrink,
- .seeks = DEFAULT_SEEKS,
-};
-
-void __init
-xfs_inode_shrinker_init(void)
-{
- init_rwsem(&xfs_mount_list_lock);
- register_shrinker(&xfs_inode_shrinker);
-}
-
-void
-xfs_inode_shrinker_destroy(void)
-{
- ASSERT(list_empty(&xfs_mount_list));
- unregister_shrinker(&xfs_inode_shrinker);
-}
-
void
xfs_inode_shrinker_register(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_add_tail(&mp->m_mplist, &xfs_mount_list);
- up_write(&xfs_mount_list_lock);
+ mp->m_inode_shrink.shrink = xfs_reclaim_inode_shrink;
+ mp->m_inode_shrink.seeks = DEFAULT_SEEKS;
+ register_shrinker(&mp->m_inode_shrink);
}
void
xfs_inode_shrinker_unregister(
struct xfs_mount *mp)
{
- down_write(&xfs_mount_list_lock);
- list_del(&mp->m_mplist);
- up_write(&xfs_mount_list_lock);
+ unregister_shrinker(&mp->m_inode_shrink);
}
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index cdcbaac..e28139a 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -55,8 +55,6 @@
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
int flags, int tag, int write_lock, int *nr_to_scan);
-void xfs_inode_shrinker_init(void);
-void xfs_inode_shrinker_destroy(void);
void xfs_inode_shrinker_register(struct xfs_mount *mp);
void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index 73d5aa1..3028206 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -124,7 +124,10 @@
unsigned long caller_ip), \
TP_ARGS(mp, agno, refcount, caller_ip))
DEFINE_PERAG_REF_EVENT(xfs_perag_get);
+DEFINE_PERAG_REF_EVENT(xfs_perag_get_reclaim);
DEFINE_PERAG_REF_EVENT(xfs_perag_put);
+DEFINE_PERAG_REF_EVENT(xfs_perag_set_reclaim);
+DEFINE_PERAG_REF_EVENT(xfs_perag_clear_reclaim);
TRACE_EVENT(xfs_attr_list_node_descend,
TP_PROTO(struct xfs_attr_list_context *ctx,
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 8c117ff..67c0183 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -69,7 +69,7 @@
STATIC int xfs_qm_init_quotainos(xfs_mount_t *);
STATIC int xfs_qm_init_quotainfo(xfs_mount_t *);
-STATIC int xfs_qm_shake(int, gfp_t);
+STATIC int xfs_qm_shake(struct shrinker *, int, gfp_t);
static struct shrinker xfs_qm_shaker = {
.shrink = xfs_qm_shake,
@@ -2117,7 +2117,10 @@
*/
/* ARGSUSED */
STATIC int
-xfs_qm_shake(int nr_to_scan, gfp_t gfp_mask)
+xfs_qm_shake(
+ struct shrinker *shrink,
+ int nr_to_scan,
+ gfp_t gfp_mask)
{
int ndqused, nfree, n;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d2c7ee..5761087 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -259,7 +259,7 @@
wait_queue_head_t m_wait_single_sync_task;
__int64_t m_update_flags; /* sb flags we need to update
on the next remount,rw */
- struct list_head m_mplist; /* inode shrinker mount list */
+ struct shrinker m_inode_shrink; /* inode reclaim shrinker */
} xfs_mount_t;
/*
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index da565a4..a68ca8a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -48,7 +48,7 @@
u8 space_id;
u8 bit_width;
u8 bit_offset;
- u8 reserved;
+ u8 access_size;
u64 address;
} __attribute__ ((packed));
@@ -63,6 +63,7 @@
u32 power;
u32 usage;
u64 time;
+ u8 bm_sts_skip;
char desc[ACPI_CX_DESC_LEN];
};
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 48c5299..030a954 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -63,6 +63,12 @@
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
+/*
+ * Align to a 32 byte boundary equal to the
+ * alignment gcc 4.5 uses for a struct
+ */
+#define STRUCT_ALIGN() . = ALIGN(32)
+
/* The actual configuration determine if the init/exit sections
* are handled as text/data or they can be discarded (which
* often happens at runtime)
@@ -166,7 +172,11 @@
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
+ \
+ STRUCT_ALIGN(); \
FTRACE_EVENTS() \
+ \
+ STRUCT_ALIGN(); \
TRACE_SYSCALLS()
/*
@@ -435,7 +445,7 @@
*/
#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
- .data..init_task : { \
+ .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
INIT_TASK_DATA(align) \
}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 224a38c..ccf94dc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -253,7 +253,7 @@
#ifdef CONFIG_PM_SLEEP
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
-void __init acpi_s4_no_nvs(void);
+void __init acpi_nvs_nosave(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 8b10386..b0c1740 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -14,14 +14,19 @@
#ifndef ASMARM_AMBA_H
#define ASMARM_AMBA_H
+#include <linux/clk.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/resource.h>
#define AMBA_NR_IRQS 2
+struct clk;
+
struct amba_device {
struct device dev;
struct resource res;
+ struct clk *pclk;
u64 dma_mask;
unsigned int periphid;
unsigned int irq[AMBA_NR_IRQS];
@@ -59,6 +64,12 @@
int amba_request_regions(struct amba_device *, const char *);
void amba_release_regions(struct amba_device *);
+#define amba_pclk_enable(d) \
+ (IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
+
+#define amba_pclk_disable(d) \
+ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
+
#define amba_config(d) (((d)->periphid >> 24) & 0xff)
#define amba_rev(d) (((d)->periphid >> 20) & 0x0f)
#define amba_manf(d) (((d)->periphid >> 12) & 0xff)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 8e5a9df..e7445df 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -873,6 +873,8 @@
static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
+ max_num * sizeof(struct aperture), GFP_KERNEL);
+ if (!a)
+ return NULL;
a->count = max_num;
return a;
}
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index 013dc52..d147461 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -61,7 +61,8 @@
(rcu_dereference_check((fdtfd), \
rcu_read_lock_held() || \
lockdep_is_held(&(files)->file_lock) || \
- atomic_read(&(files)->count) == 1))
+ atomic_read(&(files)->count) == 1 || \
+ rcu_my_thread_group_empty()))
#define files_fdtable(files) \
(rcu_dereference_check_fdtable((files), (files)->fdt))
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 9bf6870..a986ff5 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -46,31 +46,31 @@
#else
-void i8042_lock_chip(void)
+static inline void i8042_lock_chip(void)
{
}
-void i8042_unlock_chip(void)
+static inline void i8042_unlock_chip(void)
{
}
-int i8042_command(unsigned char *param, int command)
+static inline int i8042_command(unsigned char *param, int command)
{
return -ENODEV;
}
-bool i8042_check_port_owner(const struct serio *serio)
+static inline bool i8042_check_port_owner(const struct serio *serio)
{
return false;
}
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
}
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 9ea047a..1ffaeff 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -67,6 +67,8 @@
}
}
+extern void macvlan_common_setup(struct net_device *dev);
+
extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[],
int (*receive)(struct sk_buff *skb),
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index a4d2e9f..adf832d 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1026,11 +1026,12 @@
struct jbd2_buffer_trigger_type {
/*
- * Fired just before a buffer is written to the journal.
- * mapped_data is a mapped buffer that is the frozen data for
- * commit.
+ * Fired a the moment data to write to the journal are known to be
+ * stable - so either at the moment b_frozen_data is created or just
+ * before a buffer is written to the journal. mapped_data is a mapped
+ * buffer that is the frozen data for commit.
*/
- void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+ void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
struct buffer_head *bh, void *mapped_data,
size_t size);
@@ -1042,7 +1043,7 @@
struct buffer_head *bh);
};
-extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
void *mapped_data,
struct jbd2_buffer_trigger_type *triggers);
extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b969efb..a2b4804 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -999,7 +999,7 @@
* querying the cache size, so a fastpath for that case is appropriate.
*/
struct shrinker {
- int (*shrink)(int nr_to_scan, gfp_t gfp_mask);
+ int (*shrink)(struct shrinker *, int nr_to_scan, gfp_t gfp_mask);
int seeks; /* seeks to recreate an obj */
/* These are for internal use */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 9bdd914..7e4cd61 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -253,7 +253,7 @@
/* in arch/arm/plat-omap/fb.c */
extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
extern void omapfb_set_ctrl_platform_data(void *pdata);
-extern void omapfb_reserve_sdram(void);
+extern void omapfb_reserve_sdram_memblock(void);
#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7cb0084..f26fda7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -288,6 +288,7 @@
*/
unsigned int irq;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+ resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */
diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644
index 0000000..4892f59
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h -- Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ * output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+ bool defdcdc_default;
+};
+
+#endif
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 7f614ce..13ebb54 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -124,7 +124,8 @@
extern struct trace_event_functions exit_syscall_print_funcs;
#define SYSCALL_TRACE_ENTER_EVENT(sname) \
- static struct syscall_metadata __syscall_meta_##sname; \
+ static struct syscall_metadata \
+ __attribute__((__aligned__(4))) __syscall_meta_##sname; \
static struct ftrace_event_call \
__attribute__((__aligned__(4))) event_enter_##sname; \
static struct ftrace_event_call __used \
@@ -138,7 +139,8 @@
}
#define SYSCALL_TRACE_EXIT_EVENT(sname) \
- static struct syscall_metadata __syscall_meta_##sname; \
+ static struct syscall_metadata \
+ __attribute__((__aligned__(4))) __syscall_meta_##sname; \
static struct ftrace_event_call \
__attribute__((__aligned__(4))) event_exit_##sname; \
static struct ftrace_event_call __used \
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 4496322..609e8ca 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -45,6 +45,7 @@
*/
void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
int register_sysrq_key(int key, struct sysrq_key_op *op);
int unregister_sysrq_key(int key, struct sysrq_key_op *op);
struct sysrq_key_op *__sysrq_get_key_op(int key);
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index c9a9759..814f294 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -29,6 +29,7 @@
*/
#ifndef LINUX_VGA_H
+#define LINUX_VGA_H
#include <asm/vga.h>
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index fd88226..9696a5e 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -799,7 +799,7 @@
X##_e -= (_FP_W_TYPE_SIZE - rsize); \
X##_e = rsize - X##_e - 1; \
\
- if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e) \
+ if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e) \
__FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize); \
if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0) \
diff --git a/include/net/sock.h b/include/net/sock.h
index 731150d5..0a691ea 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1224,12 +1224,7 @@
static inline int sk_tx_queue_get(const struct sock *sk)
{
- return sk->sk_tx_queue_mapping;
-}
-
-static inline bool sk_tx_queue_recorded(const struct sock *sk)
-{
- return (sk && sk->sk_tx_queue_mapping >= 0);
+ return sk ? sk->sk_tx_queue_mapping : -1;
}
static inline void sk_set_socket(struct sock *sk, struct socket *sock)
diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
index ceac661..cfe2943 100644
--- a/include/net/tc_act/tc_mirred.h
+++ b/include/net/tc_act/tc_mirred.h
@@ -9,6 +9,7 @@
int tcfm_ifindex;
int tcfm_ok_push;
struct net_device *tcfm_dev;
+ struct list_head tcfm_list;
};
#define to_mirred(pc) \
container_of(pc, struct tcf_mirred, common)
diff --git a/ipc/sem.c b/ipc/sem.c
index 506c849..40a8f46 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1256,6 +1256,33 @@
return un;
}
+
+/**
+ * get_queue_result - Retrieve the result code from sem_queue
+ * @q: Pointer to queue structure
+ *
+ * Retrieve the return code from the pending queue. If IN_WAKEUP is found in
+ * q->status, then we must loop until the value is replaced with the final
+ * value: This may happen if a task is woken up by an unrelated event (e.g.
+ * signal) and in parallel the task is woken up by another task because it got
+ * the requested semaphores.
+ *
+ * The function can be called with or without holding the semaphore spinlock.
+ */
+static int get_queue_result(struct sem_queue *q)
+{
+ int error;
+
+ error = q->status;
+ while (unlikely(error == IN_WAKEUP)) {
+ cpu_relax();
+ error = q->status;
+ }
+
+ return error;
+}
+
+
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
@@ -1409,15 +1436,18 @@
else
schedule();
- error = queue.status;
- while(unlikely(error == IN_WAKEUP)) {
- cpu_relax();
- error = queue.status;
- }
+ error = get_queue_result(&queue);
if (error != -EINTR) {
/* fast path: update_queue already obtained all requested
- * resources */
+ * resources.
+ * Perform a smp_mb(): User space could assume that semop()
+ * is a memory barrier: Without the mb(), the cpu could
+ * speculatively read in user space stale data that was
+ * overwritten by the previous owner of the semaphore.
+ */
+ smp_mb();
+
goto out_free;
}
@@ -1427,10 +1457,12 @@
goto out_free;
}
+ error = get_queue_result(&queue);
+
/*
* If queue.status != -EINTR we are woken up by another process
*/
- error = queue.status;
+
if (error != -EINTR) {
goto out_unlock_free;
}
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cb7cd1..8bc5eef 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,13 +605,13 @@
if (dbg_kdb_mode) {
kgdb_connected = 1;
error = kdb_stub(ks);
+ kgdb_connected = 0;
} else {
error = gdb_serial_stub(ks);
}
if (error == DBG_PASS_EVENT) {
dbg_kdb_mode = !dbg_kdb_mode;
- kgdb_connected = 0;
} else if (error == DBG_SWITCH_CPU_EVENT) {
dbg_cpu_switch(cpu, dbg_switch_cpu);
goto cpu_loop;
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 4b17b32..e8fd686 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -621,10 +621,8 @@
switch (remcom_in_buffer[1]) {
case 's':
case 'f':
- if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
break;
- }
i = 0;
remcom_out_buffer[0] = 'm';
@@ -665,10 +663,9 @@
pack_threadid(remcom_out_buffer + 2, thref);
break;
case 'T':
- if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
- error_packet(remcom_out_buffer, -EINVAL);
+ if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
break;
- }
+
ks->threadid = 0;
ptr = remcom_in_buffer + 17;
kgdb_hex2long(&ptr, &ks->threadid);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 184cd82..ebe4a28 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1820,9 +1820,8 @@
{
if (argc != 1)
return KDB_ARGCOUNT;
- sysrq_toggle_support(1);
kdb_trap_printk++;
- handle_sysrq(*argv[1], NULL);
+ __handle_sysrq(*argv[1], NULL, 0);
kdb_trap_printk--;
return 0;
@@ -1883,6 +1882,7 @@
kdb_printf(" (Loading)");
else
kdb_printf(" (Live)");
+ kdb_printf(" 0x%p", mod->module_core);
#ifdef CONFIG_MODULE_UNLOAD
{
@@ -2291,6 +2291,9 @@
while (va) {
char buf[80];
+ if (KDB_FLAG(CMD_INTERRUPT))
+ return 0;
+
sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
diag = kdb_parse(buf);
if (diag)
diff --git a/kernel/early_res.c b/kernel/early_res.c
index 31aa933..7bfae88 100644
--- a/kernel/early_res.c
+++ b/kernel/early_res.c
@@ -7,6 +7,8 @@
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/early_res.h>
+#include <linux/slab.h>
+#include <linux/kmemleak.h>
/*
* Early reserved memory areas.
@@ -319,6 +321,8 @@
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
i = find_overlapped_early(start, end);
r = &early_res[i];
if (i >= max_early_res || r->end != end || r->start != start)
@@ -333,6 +337,8 @@
struct early_res *r;
int i;
+ kmemleak_free_part(__va(start), end - start);
+
if (start == end)
return;
diff --git a/kernel/module.c b/kernel/module.c
index 5d2d281..6c56282 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -787,7 +787,6 @@
/* Store the name of the last unloaded module for diagnostic purposes */
strlcpy(last_unloaded_module, mod->name, sizeof(last_unloaded_module));
- ddebug_remove_module(mod->name);
free_module(mod);
return 0;
@@ -1550,6 +1549,9 @@
remove_sect_attrs(mod);
mod_kobject_remove(mod);
+ /* Remove dynamic debug info */
+ ddebug_remove_module(mod->name);
+
/* Arch-specific cleanup. */
module_arch_cleanup(mod);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 58c66cc..142c84a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -833,15 +833,24 @@
void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, -1ULL);
+ if (ptr)
+ return ptr;
+
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, -1ULL);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
#endif
+
+ return ptr;
}
void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
@@ -977,14 +986,21 @@
void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
unsigned long align, unsigned long goal)
{
+ void *ptr;
+
if (WARN_ON_ONCE(slab_is_available()))
return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id);
#ifdef CONFIG_NO_BOOTMEM
- return __alloc_memory_core_early(pgdat->node_id, size, align,
+ ptr = __alloc_memory_core_early(pgdat->node_id, size, align,
+ goal, ARCH_LOW_ADDRESS_LIMIT);
+ if (ptr)
+ return ptr;
+ ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#else
- return ___alloc_bootmem_node(pgdat->bdata, size, align,
+ ptr = ___alloc_bootmem_node(pgdat->bdata, size, align,
goal, ARCH_LOW_ADDRESS_LIMIT);
#endif
+ return ptr;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 431214b..9bd339e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3634,6 +3634,9 @@
int i;
void *ptr;
+ if (limit > get_max_mapped())
+ limit = get_max_mapped();
+
/* need to go over early_node_map to find out good range for node */
for_each_active_range_index_in_nid(i, nid) {
u64 addr;
@@ -3659,6 +3662,11 @@
ptr = phys_to_virt(addr);
memset(ptr, 0, size);
reserve_early_without_check(addr, addr + size, "BOOTMEM");
+ /*
+ * The min_count is set to 0 so that bootmem allocated blocks
+ * are never reported as leaks.
+ */
+ kmemleak_alloc(ptr, size, 0, 0);
return ptr;
}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6c00814..5bffada 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -9,6 +9,7 @@
#include <linux/vmalloc.h>
#include <linux/cgroup.h>
#include <linux/swapops.h>
+#include <linux/kmemleak.h>
static void __meminit
__init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -126,6 +127,12 @@
if (!base)
base = vmalloc(table_size);
}
+ /*
+ * The value stored in section->page_cgroup is (base - pfn)
+ * and it does not point to the memory block allocated above,
+ * causing kmemleak false positives.
+ */
+ kmemleak_not_leak(base);
} else {
/*
* We don't have to allocate page_cgroup again, but
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9c7e57c..b94fe1b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -213,8 +213,9 @@
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
- unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
+ unsigned long max_pass;
+ max_pass = (*shrinker->shrink)(shrinker, 0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
delta *= max_pass;
do_div(delta, lru_pages + 1);
@@ -242,8 +243,9 @@
int shrink_ret;
int nr_before;
- nr_before = (*shrinker->shrink)(0, gfp_mask);
- shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
+ nr_before = (*shrinker->shrink)(shrinker, 0, gfp_mask);
+ shrink_ret = (*shrinker->shrink)(shrinker, this_scan,
+ gfp_mask);
if (shrink_ret == -1)
break;
if (shrink_ret < nr_before)
@@ -296,7 +298,7 @@
static void handle_write_error(struct address_space *mapping,
struct page *page, int error)
{
- lock_page(page);
+ lock_page_nosync(page);
if (page_mapping(page) == mapping)
mapping_set_error(mapping, error);
unlock_page(page);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b10e3cd..800b6b9 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -358,6 +358,11 @@
acl->sec_level = sec_level;
acl->auth_type = auth_type;
hci_acl_connect(acl);
+ } else {
+ if (acl->sec_level < sec_level)
+ acl->sec_level = sec_level;
+ if (acl->auth_type < auth_type)
+ acl->auth_type = auth_type;
}
if (type == ACL_LINK)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6c57fc7..786b5de 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1049,6 +1049,8 @@
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_AUTH;
+ else
+ conn->sec_level = BT_SECURITY_LOW;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 1b682a5..cf3c407 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -401,6 +401,11 @@
l2cap_send_sframe(pi, control);
}
+static inline int __l2cap_no_conn_pending(struct sock *sk)
+{
+ return !(l2cap_pi(sk)->conf_state & L2CAP_CONF_CONNECT_PEND);
+}
+
static void l2cap_do_start(struct sock *sk)
{
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
@@ -409,12 +414,13 @@
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
return;
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) && __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -464,12 +470,14 @@
}
if (sk->sk_state == BT_CONNECT) {
- if (l2cap_check_security(sk)) {
+ if (l2cap_check_security(sk) &&
+ __l2cap_no_conn_pending(sk)) {
struct l2cap_conn_req req;
req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
@@ -2912,7 +2920,6 @@
l2cap_pi(sk)->ident = 0;
l2cap_pi(sk)->dcid = dcid;
l2cap_pi(sk)->conf_state |= L2CAP_CONF_REQ_SENT;
-
l2cap_pi(sk)->conf_state &= ~L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
@@ -4404,6 +4411,7 @@
req.psm = l2cap_pi(sk)->psm;
l2cap_pi(sk)->ident = l2cap_get_ident(conn);
+ l2cap_pi(sk)->conf_state |= L2CAP_CONF_CONNECT_PEND;
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_REQ, sizeof(req), &req);
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index eedf2c9..753fc42 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -217,14 +217,6 @@
return count != 0 && ret;
}
-static void br_poll_controller(struct net_device *br_dev)
-{
- struct netpoll *np = br_dev->npinfo->netpoll;
-
- if (np->real_dev != br_dev)
- netpoll_poll_dev(np->real_dev);
-}
-
void br_netpoll_cleanup(struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
@@ -295,7 +287,6 @@
.ndo_do_ioctl = br_dev_ioctl,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_netpoll_cleanup = br_netpoll_cleanup,
- .ndo_poll_controller = br_poll_controller,
#endif
};
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index a4e72a8..595da45 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -50,14 +50,7 @@
kfree_skb(skb);
else {
skb_push(skb, ETH_HLEN);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (unlikely(skb->dev->priv_flags & IFF_IN_NETPOLL)) {
- netpoll_send_skb(skb->dev->npinfo->netpoll, skb);
- skb->dev->priv_flags &= ~IFF_IN_NETPOLL;
- } else
-#endif
- dev_queue_xmit(skb);
+ dev_queue_xmit(skb);
}
}
@@ -73,23 +66,9 @@
static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb)
{
-#ifdef CONFIG_NET_POLL_CONTROLLER
- struct net_bridge *br = to->br;
- if (unlikely(br->dev->priv_flags & IFF_IN_NETPOLL)) {
- struct netpoll *np;
- to->dev->npinfo = skb->dev->npinfo;
- np = skb->dev->npinfo->netpoll;
- np->real_dev = np->dev = to->dev;
- to->dev->priv_flags |= IFF_IN_NETPOLL;
- }
-#endif
skb->dev = to->dev;
NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
br_forward_finish);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (skb->dev->npinfo)
- skb->dev->npinfo->netpoll->dev = br->dev;
-#endif
}
static void __br_forward(const struct net_bridge_port *to, struct sk_buff *skb)
diff --git a/net/core/dev.c b/net/core/dev.c
index 723a347..1f466e8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1488,6 +1488,7 @@
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
skb_orphan(skb);
+ nf_reset(skb);
if (!(dev->flags & IFF_UP) ||
(skb->len > (dev->mtu + dev->hard_header_len))) {
@@ -1911,8 +1912,16 @@
*/
static inline void skb_orphan_try(struct sk_buff *skb)
{
- if (!skb_tx(skb)->flags)
+ struct sock *sk = skb->sk;
+
+ if (sk && !skb_tx(skb)->flags) {
+ /* skb_tx_hash() wont be able to get sk.
+ * We copy sk_hash into skb->rxhash
+ */
+ if (!skb->rxhash)
+ skb->rxhash = sk->sk_hash;
skb_orphan(skb);
+ }
}
int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -1998,8 +2007,7 @@
if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
else
- hash = (__force u16) skb->protocol;
-
+ hash = (__force u16) skb->protocol ^ skb->rxhash;
hash = jhash_1word(hash, hashrnd);
return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
@@ -2022,12 +2030,11 @@
static struct netdev_queue *dev_pick_tx(struct net_device *dev,
struct sk_buff *skb)
{
- u16 queue_index;
+ int queue_index;
struct sock *sk = skb->sk;
- if (sk_tx_queue_recorded(sk)) {
- queue_index = sk_tx_queue_get(sk);
- } else {
+ queue_index = sk_tx_queue_get(sk);
+ if (queue_index < 0) {
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_select_queue) {
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 6ba1c0e..a4e0a74 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -949,7 +949,10 @@
{
struct hh_cache *hh;
void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
- = neigh->dev->header_ops->cache_update;
+ = NULL;
+
+ if (neigh->dev->header_ops)
+ update = neigh->dev->header_ops->cache_update;
if (update) {
for (hh = neigh->hh; hh; hh = hh->hh_next) {
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 34432b4..ce88293 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -843,7 +843,9 @@
skb->network_header += off;
if (skb_mac_header_was_set(skb))
skb->mac_header += off;
- skb->csum_start += nhead;
+ /* Only adjust this if it actually is csum_start rather than csum */
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ skb->csum_start += nhead;
skb->cloned = 0;
skb->hdr_len = 0;
skb->nohdr = 0;
@@ -930,7 +932,8 @@
copy_skb_header(n, skb);
off = newheadroom - oldheadroom;
- n->csum_start += off;
+ if (n->ip_summed == CHECKSUM_PARTIAL)
+ n->csum_start += off;
#ifdef NET_SKBUFF_DATA_USES_OFFSET
n->transport_header += off;
n->network_header += off;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index c51b554..1120178 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,7 +1,7 @@
menuconfig NET_DSA
bool "Distributed Switch Architecture support"
default n
- depends on EXPERIMENTAL && !S390
+ depends on EXPERIMENTAL && NET_ETHERNET && !S390
select PHYLIB
---help---
This allows you to use hardware switch chips that use
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 757f25eb..7f62735 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -442,8 +442,10 @@
int err;
err = ipmr_fib_lookup(net, &fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
dev->stats.tx_bytes += skb->len;
@@ -1728,8 +1730,10 @@
goto dont_forward;
err = ipmr_fib_lookup(net, &skb_rtable(skb)->fl, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
if (!local) {
if (IPCB(skb)->opt.router_alert) {
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 6596b4f..65afeae 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -608,6 +608,7 @@
ssize_t spliced;
int ret;
+ sock_rps_record_flow(sk);
/*
* We can't seek on a socket input
*/
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index b4ed957..7ed9dc1 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2208,6 +2208,9 @@
int mib_idx;
int fwd_rexmitting = 0;
+ if (!tp->packets_out)
+ return;
+
if (!tp->lost_out)
tp->retransmit_high = tp->snd_una;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e1a698d..784f34d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1760,7 +1760,10 @@
idev = ipv6_find_idev(dev);
if (!idev)
- return NULL;
+ return ERR_PTR(-ENOBUFS);
+
+ if (idev->cnf.disable_ipv6)
+ return ERR_PTR(-EACCES);
/* Add default multicast route */
addrconf_add_mroute(dev);
@@ -2129,8 +2132,9 @@
if (!dev)
return -ENODEV;
- if ((idev = addrconf_add_dev(dev)) == NULL)
- return -ENOBUFS;
+ idev = addrconf_add_dev(dev);
+ if (IS_ERR(idev))
+ return PTR_ERR(idev);
scope = ipv6_addr_scope(pfx);
@@ -2377,7 +2381,7 @@
}
idev = addrconf_add_dev(dev);
- if (idev == NULL)
+ if (IS_ERR(idev))
return;
memset(&addr, 0, sizeof(struct in6_addr));
@@ -2468,7 +2472,7 @@
ASSERT_RTNL();
idev = addrconf_add_dev(dev);
- if (!idev) {
+ if (IS_ERR(idev)) {
printk(KERN_DEBUG "init ip6-ip6: add_dev failed\n");
return;
}
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 2794b60..d6e9599 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -347,11 +347,12 @@
static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
{
+ struct ipv6hdr *iph = ipv6_hdr(skb);
struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
int err = rt2->rt_hdr.nexthdr;
spin_lock(&x->lock);
- if (!ipv6_addr_equal(&rt2->addr, (struct in6_addr *)x->coaddr) &&
+ if (!ipv6_addr_equal(&iph->daddr, (struct in6_addr *)x->coaddr) &&
!ipv6_addr_any((struct in6_addr *)x->coaddr))
err = -ENOENT;
spin_unlock(&x->lock);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index c7000a6..67ee34f 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -632,7 +632,7 @@
skb->dev = sta->sdata->dev;
skb->protocol = eth_type_trans(skb, sta->sdata->dev);
memset(skb->cb, 0, sizeof(skb->cb));
- netif_rx(skb);
+ netif_rx_ni(skb);
}
static void sta_apply_parameters(struct ieee80211_local *local,
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 94d72e8..b2a3ae6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -698,6 +698,7 @@
newsk = NULL;
goto out;
}
+ kfree_skb(oskb);
sock_hold(sk);
pep_sk(newsk)->listener = sk;
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index c0b6863..1980b71 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -33,6 +33,7 @@
static struct tcf_common *tcf_mirred_ht[MIRRED_TAB_MASK + 1];
static u32 mirred_idx_gen;
static DEFINE_RWLOCK(mirred_lock);
+static LIST_HEAD(mirred_list);
static struct tcf_hashinfo mirred_hash_info = {
.htab = tcf_mirred_ht,
@@ -47,7 +48,9 @@
m->tcf_bindcnt--;
m->tcf_refcnt--;
if(!m->tcf_bindcnt && m->tcf_refcnt <= 0) {
- dev_put(m->tcfm_dev);
+ list_del(&m->tcfm_list);
+ if (m->tcfm_dev)
+ dev_put(m->tcfm_dev);
tcf_hash_destroy(&m->common, &mirred_hash_info);
return 1;
}
@@ -134,8 +137,10 @@
m->tcfm_ok_push = ok_push;
}
spin_unlock_bh(&m->tcf_lock);
- if (ret == ACT_P_CREATED)
+ if (ret == ACT_P_CREATED) {
+ list_add(&m->tcfm_list, &mirred_list);
tcf_hash_insert(pc, &mirred_hash_info);
+ }
return ret;
}
@@ -162,9 +167,14 @@
m->tcf_tm.lastuse = jiffies;
dev = m->tcfm_dev;
+ if (!dev) {
+ printk_once(KERN_NOTICE "tc mirred: target device is gone\n");
+ goto out;
+ }
+
if (!(dev->flags & IFF_UP)) {
if (net_ratelimit())
- pr_notice("tc mirred to Houston: device %s is gone!\n",
+ pr_notice("tc mirred to Houston: device %s is down\n",
dev->name);
goto out;
}
@@ -232,6 +242,28 @@
return -1;
}
+static int mirred_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+ struct tcf_mirred *m;
+
+ if (event == NETDEV_UNREGISTER)
+ list_for_each_entry(m, &mirred_list, tcfm_list) {
+ if (m->tcfm_dev == dev) {
+ dev_put(dev);
+ m->tcfm_dev = NULL;
+ }
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block mirred_device_notifier = {
+ .notifier_call = mirred_device_event,
+};
+
+
static struct tc_action_ops act_mirred_ops = {
.kind = "mirred",
.hinfo = &mirred_hash_info,
@@ -252,12 +284,17 @@
static int __init mirred_init_module(void)
{
+ int err = register_netdevice_notifier(&mirred_device_notifier);
+ if (err)
+ return err;
+
pr_info("Mirror/redirect action on\n");
return tcf_register_action(&act_mirred_ops);
}
static void __exit mirred_cleanup_module(void)
{
+ unregister_netdevice_notifier(&mirred_device_notifier);
tcf_unregister_action(&act_mirred_ops);
}
diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c
index 5709494..724553e 100644
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -205,7 +205,7 @@
{
struct icmphdr *icmph;
- if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph)))
goto drop;
icmph = (void *)(skb_network_header(skb) + ihl);
@@ -215,6 +215,9 @@
(icmph->type != ICMP_PARAMETERPROB))
break;
+ if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+ goto drop;
+
iph = (void *)(icmph + 1);
if (egress)
addr = iph->daddr;
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 73affb8..8dc47f1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -267,7 +267,7 @@
* Run memory cache shrinker.
*/
static int
-rpcauth_cache_shrinker(int nr_to_scan, gfp_t gfp_mask)
+rpcauth_cache_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
{
LIST_HEAD(free);
int res;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index af1c173..a7ec5a8 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1594,8 +1594,8 @@
/* Try to instantiate a bundle */
err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
- if (err < 0) {
- if (err != -EAGAIN)
+ if (err <= 0) {
+ if (err != 0 && err != -EAGAIN)
XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
return ERR_PTR(err);
}
@@ -1678,6 +1678,13 @@
goto make_dummy_bundle;
dst_hold(&xdst->u.dst);
return oldflo;
+ } else if (new_xdst == NULL) {
+ num_xfrms = 0;
+ if (oldflo == NULL)
+ goto make_dummy_bundle;
+ xdst->num_xfrms = 0;
+ dst_hold(&xdst->u.dst);
+ return oldflo;
}
/* Kill the previous bundle */
@@ -1760,6 +1767,10 @@
xfrm_pols_put(pols, num_pols);
err = PTR_ERR(xdst);
goto dropdst;
+ } else if (xdst == NULL) {
+ num_xfrms = 0;
+ drop_pols = num_pols;
+ goto no_transform;
}
spin_lock_bh(&xfrm_policy_sk_bundle_lock);
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index 115edb4..a9d9344 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -226,7 +226,7 @@
int len = get_line_length(line);
strncpy(tmp, line, min(len, x));
tmp[len] = '\0';
- mvwprintw(win, i, 0, tmp);
+ mvwprintw(win, i, 0, "%s", tmp);
}
}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 3a681ef..d2c29b6 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -44,7 +44,7 @@
fi
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
- $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --scm-only > $(objtree)/.scmversion
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion --save-scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
rm -f $(objtree)/.scmversion
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index d6a866e..64a9cb5 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -10,13 +10,13 @@
#
usage() {
- echo "Usage: $0 [--scm-only] [srctree]" >&2
+ echo "Usage: $0 [--save-scmversion] [srctree]" >&2
exit 1
}
scm_only=false
srctree=.
-if test "$1" = "--scm-only"; then
+if test "$1" = "--save-scmversion"; then
scm_only=true
shift
fi
@@ -30,11 +30,12 @@
scm_version()
{
- local short=false
+ local short
+ short=false
cd "$srctree"
if test -e .scmversion; then
- cat "$_"
+ cat .scmversion
return
fi
if test "$1" = "--short"; then
@@ -131,12 +132,15 @@
}
if $scm_only; then
- scm_version
+ if test ! -e .scmversion; then
+ res=$(scm_version)
+ echo "$res" >.scmversion
+ fi
exit
fi
if test -e include/config/auto.conf; then
- source "$_"
+ . include/config/auto.conf
else
echo "Error: kernelrelease not valid - run 'make prepare' to update it"
exit 1
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index 495be6e..24454c9 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -300,7 +300,7 @@
};
EXPORT_SYMBOL(au1xpsc_i2s_dai);
-static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev)
+static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
{
struct resource *r;
unsigned long sel;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 31ac553..5da30eb 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,8 +83,8 @@
config SND_SOC_WM_HUBS
tristate
- default y if SND_SOC_WM8993=y
- default m if SND_SOC_WM8993=m
+ default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y
+ default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_AC97_CODEC
tristate
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
index 1072621..9d1df262 100644
--- a/sound/soc/codecs/wm8727.c
+++ b/sound/soc/codecs/wm8727.c
@@ -127,6 +127,8 @@
goto err_codec;
}
+ return 0;
+
err_codec:
snd_soc_unregister_codec(codec);
err:
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 7e4a627..4e212ed 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -94,7 +94,6 @@
static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("AUX"),
-SND_SOC_DAPM_INPUT("AUX"),
SND_SOC_DAPM_INPUT("AIN1"),
SND_SOC_DAPM_INPUT("AIN2"),
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 0417dae..19ad590 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -885,7 +885,6 @@
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
- snd_soc_unregister_codec(codec);
goto err_codec;
}
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3396a0d..ec4acac 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -683,20 +683,15 @@
/* clock inversion (CKG2) */
data = 0;
- switch (SH_FSI_INVERSION_MASK & flags) {
- case SH_FSI_LRM_INV:
- data = 1 << 12;
- break;
- case SH_FSI_BRM_INV:
- data = 1 << 8;
- break;
- case SH_FSI_LRS_INV:
- data = 1 << 4;
- break;
- case SH_FSI_BRS_INV:
- data = 1 << 0;
- break;
- }
+ if (SH_FSI_LRM_INV & flags)
+ data |= 1 << 12;
+ if (SH_FSI_BRM_INV & flags)
+ data |= 1 << 8;
+ if (SH_FSI_LRS_INV & flags)
+ data |= 1 << 4;
+ if (SH_FSI_BRS_INV & flags)
+ data |= 1 << 0;
+
fsi_reg_write(fsi, CKG2, data);
/* do fmt, di fmt */
@@ -726,15 +721,15 @@
break;
case SH_FSI_FMT_TDM:
msg = "TDM";
- data = CR_FMT(CR_TDM) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM) | (fsi->chan - 1);
break;
case SH_FSI_FMT_TDM_DELAY:
msg = "TDM Delay";
- data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
fsi->chan = is_play ?
SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
break;
default:
dev_err(dai->dev, "unknown format.\n");
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3d8f31e..d75c28a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -600,30 +600,32 @@
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
-else ifdef HAVE_CPLUS_DEMANGLE
- EXTLIBS += -liberty
- BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
-
- ifeq ($(has_bfd),y)
- EXTLIBS += -lbfd
+ ifdef HAVE_CPLUS_DEMANGLE
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_bfd_iberty),y)
- EXTLIBS += -lbfd -liberty
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+
+ ifeq ($(has_bfd),y)
+ EXTLIBS += -lbfd
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_bfd_iberty_z),y)
- EXTLIBS += -lbfd -liberty -lz
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_bfd_iberty),y)
+ EXTLIBS += -lbfd -liberty
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
- ifeq ($(has_cplus_demangle),y)
- EXTLIBS += -liberty
- BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_bfd_iberty_z),y)
+ EXTLIBS += -lbfd -liberty -lz
else
- msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
- BASIC_CFLAGS += -DNO_DEMANGLE
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+ ifeq ($(has_cplus_demangle),y)
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ else
+ msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
+ BASIC_CFLAGS += -DNO_DEMANGLE
+ endif
endif
endif
endif
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
new file mode 100644
index 0000000..15130b50
--- /dev/null
+++ b/tools/perf/arch/sparc/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/sparc/util/dwarf-regs.c b/tools/perf/arch/sparc/util/dwarf-regs.c
new file mode 100644
index 0000000..0ab8848
--- /dev/null
+++ b/tools/perf/arch/sparc/util/dwarf-regs.c
@@ -0,0 +1,43 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ * Copyright (C) 2010 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define SPARC_MAX_REGS 96
+
+const char *sparc_regs_table[SPARC_MAX_REGS] = {
+ "%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+ "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%sp", "%o7",
+ "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+ "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%fp", "%i7",
+ "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7",
+ "%f8", "%f9", "%f10", "%f11", "%f12", "%f13", "%f14", "%f15",
+ "%f16", "%f17", "%f18", "%f19", "%f20", "%f21", "%f22", "%f23",
+ "%f24", "%f25", "%f26", "%f27", "%f28", "%f29", "%f30", "%f31",
+ "%f32", "%f33", "%f34", "%f35", "%f36", "%f37", "%f38", "%f39",
+ "%f40", "%f41", "%f42", "%f43", "%f44", "%f45", "%f46", "%f47",
+ "%f48", "%f49", "%f50", "%f51", "%f52", "%f53", "%f54", "%f55",
+ "%f56", "%f57", "%f58", "%f59", "%f60", "%f61", "%f62", "%f63",
+};
+
+/**
+ * get_arch_regstr() - lookup register name from it's DWARF register number
+ * @n: the DWARF register number
+ *
+ * get_arch_regstr() returns the name of the register in struct
+ * regdwarfnum_table from it's DWARF register number. If the register is not
+ * found in the table, this returns NULL;
+ */
+const char *get_arch_regstr(unsigned int n)
+{
+ return (n <= SPARC_MAX_REGS) ? sparc_regs_table[n] : NULL;
+}
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 3592057..fd7407c 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -107,7 +107,7 @@
goto out_free_syms;
err = 0;
if (symbol_conf.use_callchain) {
- err = append_chain(he->callchain, data->callchain, syms);
+ err = append_chain(he->callchain, data->callchain, syms, data->period);
if (err)
goto out_free_syms;
}
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 49ece79..97d7656 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -5,17 +5,13 @@
fi
GVF=${OUTPUT}PERF-VERSION-FILE
-DEF_VER=v0.0.2.PERF
LF='
'
-# First see if there is a version file (included in release tarballs),
-# then try git-describe, then default.
-if test -f version
-then
- VN=$(cat version) || VN="$DEF_VER"
-elif test -d .git -o -f .git &&
+# First check if there is a .git to get the version from git describe
+# otherwise try to get the version from the kernel makefile
+if test -d ../../.git -o -f ../../.git &&
VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
case "$VN" in
*$LF*) (exit 1) ;;
@@ -27,7 +23,12 @@
then
VN=$(echo "$VN" | sed -e 's/-/./g');
else
- VN="$DEF_VER"
+ eval `grep '^VERSION\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^PATCHLEVEL\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^SUBLEVEL\s*=' ../../Makefile|tr -d ' '`
+ eval `grep '^EXTRAVERSION\s*=' ../../Makefile|tr -d ' '`
+
+ VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
fi
VN=$(expr "$VN" : v*'\(.*\)')
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 62b69ad..52c777e 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -230,7 +230,7 @@
static void
add_child(struct callchain_node *parent, struct resolved_chain *chain,
- int start)
+ int start, u64 period)
{
struct callchain_node *new;
@@ -238,7 +238,7 @@
fill_node(new, chain, start);
new->children_hit = 0;
- new->hit = 1;
+ new->hit = period;
}
/*
@@ -248,7 +248,8 @@
*/
static void
split_add_child(struct callchain_node *parent, struct resolved_chain *chain,
- struct callchain_list *to_split, int idx_parents, int idx_local)
+ struct callchain_list *to_split, int idx_parents, int idx_local,
+ u64 period)
{
struct callchain_node *new;
struct list_head *old_tail;
@@ -275,41 +276,41 @@
/* create a new child for the new branch if any */
if (idx_total < chain->nr) {
parent->hit = 0;
- add_child(parent, chain, idx_total);
- parent->children_hit++;
+ add_child(parent, chain, idx_total, period);
+ parent->children_hit += period;
} else {
- parent->hit = 1;
+ parent->hit = period;
}
}
static int
__append_chain(struct callchain_node *root, struct resolved_chain *chain,
- unsigned int start);
+ unsigned int start, u64 period);
static void
__append_chain_children(struct callchain_node *root,
struct resolved_chain *chain,
- unsigned int start)
+ unsigned int start, u64 period)
{
struct callchain_node *rnode;
/* lookup in childrens */
chain_for_each_child(rnode, root) {
- unsigned int ret = __append_chain(rnode, chain, start);
+ unsigned int ret = __append_chain(rnode, chain, start, period);
if (!ret)
goto inc_children_hit;
}
/* nothing in children, add to the current node */
- add_child(root, chain, start);
+ add_child(root, chain, start, period);
inc_children_hit:
- root->children_hit++;
+ root->children_hit += period;
}
static int
__append_chain(struct callchain_node *root, struct resolved_chain *chain,
- unsigned int start)
+ unsigned int start, u64 period)
{
struct callchain_list *cnode;
unsigned int i = start;
@@ -345,18 +346,18 @@
/* we match only a part of the node. Split it and add the new chain */
if (i - start < root->val_nr) {
- split_add_child(root, chain, cnode, start, i - start);
+ split_add_child(root, chain, cnode, start, i - start, period);
return 0;
}
/* we match 100% of the path, increment the hit */
if (i - start == root->val_nr && i == chain->nr) {
- root->hit++;
+ root->hit += period;
return 0;
}
/* We match the node and still have a part remaining */
- __append_chain_children(root, chain, i);
+ __append_chain_children(root, chain, i, period);
return 0;
}
@@ -380,7 +381,7 @@
int append_chain(struct callchain_node *root, struct ip_callchain *chain,
- struct map_symbol *syms)
+ struct map_symbol *syms, u64 period)
{
struct resolved_chain *filtered;
@@ -397,7 +398,7 @@
if (!filtered->nr)
goto end;
- __append_chain_children(root, filtered, 0);
+ __append_chain_children(root, filtered, 0, period);
end:
free(filtered);
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 1ca73e4..f2e9ee1 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -49,6 +49,9 @@
INIT_LIST_HEAD(&node->brothers);
INIT_LIST_HEAD(&node->children);
INIT_LIST_HEAD(&node->val);
+
+ node->parent = NULL;
+ node->hit = 0;
}
static inline u64 cumul_hits(struct callchain_node *node)
@@ -58,7 +61,7 @@
int register_callchain_param(struct callchain_param *param);
int append_chain(struct callchain_node *root, struct ip_callchain *chain,
- struct map_symbol *syms);
+ struct map_symbol *syms, u64 period);
bool ip_callchain__valid(struct ip_callchain *chain, event_t *event);
#endif /* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 07f89b66..784ee0b 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -631,9 +631,14 @@
u64 session_total)
{
char bf[512];
- hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
- show_displacement, displacement,
- true, session_total);
+ int ret;
+
+ ret = hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
+ show_displacement, displacement,
+ true, session_total);
+ if (!ret)
+ return 0;
+
return fprintf(fp, "%s\n", bf);
}
@@ -762,6 +767,7 @@
print_entries:
for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+ int cnt;
if (show_displacement) {
if (h->pair != NULL)
@@ -771,8 +777,13 @@
displacement = 0;
++position;
}
- ret += hist_entry__fprintf(h, pair, show_displacement,
- displacement, fp, self->stats.total_period);
+ cnt = hist_entry__fprintf(h, pair, show_displacement,
+ displacement, fp, self->stats.total_period);
+ /* Ignore those that didn't match the parent filter */
+ if (!cnt)
+ continue;
+
+ ret += cnt;
if (symbol_conf.use_callchain)
ret += hist_entry__fprintf_callchain(h, fp, self->stats.total_period);
@@ -965,13 +976,17 @@
* Parse hexa addresses followed by ':'
*/
line_ip = strtoull(tmp, &tmp2, 16);
- if (*tmp2 != ':' || tmp == tmp2)
+ if (*tmp2 != ':' || tmp == tmp2 || tmp2[1] == '\0')
line_ip = -1;
}
if (line_ip != -1) {
- u64 start = map__rip_2objdump(self->ms.map, sym->start);
+ u64 start = map__rip_2objdump(self->ms.map, sym->start),
+ end = map__rip_2objdump(self->ms.map, sym->end);
+
offset = line_ip - start;
+ if (offset < 0 || (u64)line_ip > end)
+ offset = -1;
}
objdump_line = objdump_line__new(offset, line);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b63e571..5b27683 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1443,6 +1443,7 @@
{
struct dirent *dent;
DIR *dir = opendir(dir_name);
+ int ret = 0;
if (!dir) {
pr_debug("%s: cannot open %s dir\n", __func__, dir_name);
@@ -1465,8 +1466,9 @@
snprintf(path, sizeof(path), "%s/%s",
dir_name, dent->d_name);
- if (map_groups__set_modules_path_dir(self, path) < 0)
- goto failure;
+ ret = map_groups__set_modules_path_dir(self, path);
+ if (ret < 0)
+ goto out;
} else {
char *dot = strrchr(dent->d_name, '.'),
dso_name[PATH_MAX];
@@ -1487,17 +1489,18 @@
dir_name, dent->d_name);
long_name = strdup(path);
- if (long_name == NULL)
- goto failure;
+ if (long_name == NULL) {
+ ret = -1;
+ goto out;
+ }
dso__set_long_name(map->dso, long_name);
dso__kernel_module_get_build_id(map->dso, "");
}
}
- return 0;
-failure:
+out:
closedir(dir);
- return -1;
+ return ret;
}
static char *get_kernel_version(const char *root_dir)