| /* |
| * Copyright (C) 2014 NXP Semiconductors, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| #define pr_fmt(fmt) "%s(): " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <linux/of_gpio.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/debugfs.h> |
| #include <linux/version.h> |
| #include <linux/input.h> |
| #include "config.h" |
| #include "tfa98xx.h" |
| #include "tfa.h" |
| |
| /* required for enum tfa9912_irq */ |
| #include "tfa98xx_tfafieldnames.h" |
| |
| #define TFA98XX_VERSION TFA98XX_API_REV_STR |
| |
| #define I2C_RETRIES 50 |
| #define I2C_RETRY_DELAY 5 /* ms */ |
| #define ERR -1 |
| |
| /* Change volume selection behavior: |
| * Uncomment following line to generate a profile change when updating |
| * a volume control (also changes to the profile of the modified volume |
| * control) |
| */ |
| /*#define TFA98XX_ALSA_CTRL_PROF_CHG_ON_VOL 1 |
| */ |
| |
| /* Supported rates and data formats */ |
| #define TFA98XX_RATES SNDRV_PCM_RATE_8000_48000 |
| #define TFA98XX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| #define TF98XX_MAX_DSP_START_TRY_COUNT 10 |
| |
| /* data accessible by all instances */ |
| /* Memory pool used for DSP messages */ |
| static struct kmem_cache *tfa98xx_cache; |
| /* Mutex protected data */ |
| static DEFINE_MUTEX(tfa98xx_mutex); |
| static LIST_HEAD(tfa98xx_device_list); |
| static int tfa98xx_device_count; |
| static int tfa98xx_sync_count; |
| static LIST_HEAD(profile_list); /* list of user selectable profiles */ |
| static int tfa98xx_mixer_profiles; /* number of user selectable profiles */ |
| static int tfa98xx_mixer_profile; /* current mixer profile */ |
| static struct snd_kcontrol_new *tfa98xx_controls; |
| static nxpTfaContainer_t *tfa98xx_container; |
| |
| static int tfa98xx_kmsg_regs; |
| static int tfa98xx_ftrace_regs; |
| |
| static char *fw_name = "tfa98xx.cnt"; |
| module_param(fw_name, charp, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(fw_name, "TFA98xx DSP firmware (container file) name."); |
| |
| static int trace_level; |
| module_param(trace_level, int, S_IRUGO); |
| MODULE_PARM_DESC(trace_level, "TFA98xx debug trace level (0=off, bits:1=verbose,2=regdmesg,3=regftrace,4=timing)."); |
| |
| static char *dflt_prof_name = ""; |
| module_param(dflt_prof_name, charp, S_IRUGO); |
| |
| static int no_start; |
| module_param(no_start, int, S_IRUGO); |
| MODULE_PARM_DESC(no_start, "do not start the work queue; for debugging via user\n"); |
| |
| static int no_reset; |
| module_param(no_reset, int, S_IRUGO); |
| MODULE_PARM_DESC(no_reset, "do not use the reset line; for debugging via user\n"); |
| |
| static int pcm_sample_format; |
| module_param(pcm_sample_format, int, S_IRUGO); |
| MODULE_PARM_DESC(pcm_sample_format, "PCM sample format: 0=S16_LE, 1=S24_LE, 2=S32_LE\n"); |
| |
| static int pcm_no_constraint; |
| module_param(pcm_no_constraint, int, S_IRUGO); |
| MODULE_PARM_DESC(pcm_no_constraint, "do not use constraints for PCM parameters\n"); |
| |
| static void tfa98xx_tapdet_check_update(struct tfa98xx *tfa98xx); |
| static int tfa98xx_get_fssel(unsigned int rate); |
| static void tfa98xx_interrupt_enable(struct tfa98xx *tfa98xx, bool enable); |
| |
| static int get_profile_from_list(char *buf, int id); |
| static int get_profile_id_for_sr(int id, unsigned int rate); |
| |
| struct tfa98xx_rate { |
| unsigned int rate; |
| unsigned int fssel; |
| }; |
| |
| static const struct tfa98xx_rate rate_to_fssel[] = { |
| { 8000, 0 }, |
| { 11025, 1 }, |
| { 12000, 2 }, |
| { 16000, 3 }, |
| { 22050, 4 }, |
| { 24000, 5 }, |
| { 32000, 6 }, |
| { 44100, 7 }, |
| { 48000, 8 }, |
| }; |
| |
| |
| static inline char *tfa_cont_profile_name(struct tfa98xx *tfa98xx, |
| int prof_idx) |
| { |
| if (tfa98xx->tfa->cnt == NULL) |
| return NULL; |
| return tfaContProfileName(tfa98xx->tfa->cnt, |
| tfa98xx->tfa->dev_idx, prof_idx); |
| } |
| |
| static enum tfa_error tfa98xx_write_re25(struct tfa_device *tfa, int value) |
| { |
| enum tfa_error err; |
| |
| /* clear MTPEX */ |
| err = tfa_dev_mtp_set(tfa, TFA_MTP_EX, 0); |
| if (err == tfa_error_ok) { |
| /* set RE25 in shadow regiser */ |
| err = tfa_dev_mtp_set(tfa, TFA_MTP_RE25_PRIM, value); |
| } |
| if (err == tfa_error_ok) { |
| /* set MTPEX to copy RE25 into MTP */ |
| err = tfa_dev_mtp_set(tfa, TFA_MTP_EX, 2); |
| } |
| |
| return err; |
| } |
| |
| /* Wrapper for tfa start */ |
| static enum tfa_error tfa98xx_tfa_start(struct tfa98xx *tfa98xx, |
| int next_profile, int vstep) |
| { |
| enum tfa_error err; |
| ktime_t start_time, stop_time; |
| u64 delta_time; |
| |
| if (trace_level & 8) |
| start_time = ktime_get_boottime(); |
| |
| err = tfa_dev_start(tfa98xx->tfa, next_profile, vstep); |
| |
| if (trace_level & 8) { |
| stop_time = ktime_get_boottime(); |
| delta_time = ktime_to_ns(ktime_sub(stop_time, start_time)); |
| do_div(delta_time, 1000); |
| dev_dbg(&tfa98xx->i2c->dev, "tfa_dev_start(%d,%d) time = %lld us\n", |
| next_profile, vstep, delta_time); |
| } |
| |
| if ((err == tfa_error_ok) && (tfa98xx->set_mtp_cal)) { |
| enum tfa_error err_cal; |
| |
| err_cal = tfa98xx_write_re25(tfa98xx->tfa, tfa98xx->cal_data); |
| if (err_cal != tfa_error_ok) { |
| pr_err("Error, setting calibration value in mtp, err=%d\n", |
| err_cal); |
| } else { |
| tfa98xx->set_mtp_cal = false; |
| pr_info("Calibration value (%d) set in mtp\n", |
| tfa98xx->cal_data); |
| } |
| } |
| |
| /* Check and update tap-detection state (in case of profile change) */ |
| tfa98xx_tapdet_check_update(tfa98xx); |
| |
| /* Remove sticky bit by reading it once */ |
| tfa_get_noclk(tfa98xx->tfa); |
| |
| /* A cold start erases the configuration, including interrupts setting. |
| * Restore it if required |
| */ |
| tfa98xx_interrupt_enable(tfa98xx, true); |
| |
| return err; |
| } |
| |
| static int tfa98xx_input_open(struct input_dev *dev) |
| { |
| struct tfa98xx *tfa98xx = input_get_drvdata(dev); |
| |
| dev_dbg(tfa98xx->codec->dev, "opening device file\n"); |
| |
| /* note: open function is called only once by the framework. |
| * No need to count number of open file instances. |
| */ |
| if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) { |
| dev_dbg(&tfa98xx->i2c->dev, |
| "DSP not loaded, cannot start tap-detection\n"); |
| return -EIO; |
| } |
| |
| /* enable tap-detection service */ |
| tfa98xx->tapdet_open = true; |
| tfa98xx_tapdet_check_update(tfa98xx); |
| |
| return 0; |
| } |
| |
| static void tfa98xx_input_close(struct input_dev *dev) |
| { |
| struct tfa98xx *tfa98xx = input_get_drvdata(dev); |
| |
| dev_dbg(tfa98xx->codec->dev, "closing device file\n"); |
| |
| /* Note: close function is called if the device is unregistered */ |
| |
| /* disable tap-detection service */ |
| tfa98xx->tapdet_open = false; |
| tfa98xx_tapdet_check_update(tfa98xx); |
| } |
| |
| static int tfa98xx_register_inputdev(struct tfa98xx *tfa98xx) |
| { |
| int err; |
| struct input_dev *input; |
| input = input_allocate_device(); |
| |
| if (!input) { |
| dev_err(tfa98xx->codec->dev, "Unable to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| input->evbit[0] = BIT_MASK(EV_KEY); |
| input->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); |
| input->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); |
| input->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); |
| input->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); |
| input->keybit[BIT_WORD(BTN_4)] |= BIT_MASK(BTN_4); |
| input->keybit[BIT_WORD(BTN_5)] |= BIT_MASK(BTN_5); |
| input->keybit[BIT_WORD(BTN_6)] |= BIT_MASK(BTN_6); |
| input->keybit[BIT_WORD(BTN_7)] |= BIT_MASK(BTN_7); |
| input->keybit[BIT_WORD(BTN_8)] |= BIT_MASK(BTN_8); |
| input->keybit[BIT_WORD(BTN_9)] |= BIT_MASK(BTN_9); |
| |
| input->open = tfa98xx_input_open; |
| input->close = tfa98xx_input_close; |
| |
| input->name = "tfa98xx-tapdetect"; |
| |
| input->id.bustype = BUS_I2C; |
| input_set_drvdata(input, tfa98xx); |
| |
| err = input_register_device(input); |
| if (err) { |
| dev_err(tfa98xx->codec->dev, "Unable to register input device\n"); |
| goto err_free_dev; |
| } |
| |
| dev_dbg(tfa98xx->codec->dev, "Input device for tap-detection registered: %s\n", |
| input->name); |
| tfa98xx->input = input; |
| return 0; |
| |
| err_free_dev: |
| input_free_device(input); |
| return err; |
| } |
| |
| /* |
| * Check if an input device for tap-detection can and shall be registered. |
| * Register it if appropriate. |
| * If already registered, check if still relevant and remove it if necessary. |
| * unregister: true to request inputdev unregistration. |
| */ |
| static void __tfa98xx_inputdev_check_register(struct tfa98xx *tfa98xx, bool unregister) |
| { |
| bool tap_profile = false; |
| unsigned int i; |
| for (i = 0; i < tfa_cnt_get_dev_nprof(tfa98xx->tfa); i++) { |
| if (strstr(tfa_cont_profile_name(tfa98xx, i), ".tap")) { |
| tap_profile = true; |
| tfa98xx->tapdet_profiles |= 1 << i; |
| dev_info(tfa98xx->codec->dev, |
| "found a tap-detection profile (%d - %s)\n", |
| i, tfa_cont_profile_name(tfa98xx, i)); |
| } |
| } |
| |
| /* Check for device support: |
| * - at device level |
| * - at container (profile) level |
| */ |
| if (!(tfa98xx->flags & TFA98XX_FLAG_TAPDET_AVAILABLE) || |
| !tap_profile || |
| unregister) { |
| /* No input device supported or required */ |
| if (tfa98xx->input) { |
| input_unregister_device(tfa98xx->input); |
| tfa98xx->input = NULL; |
| } |
| return; |
| } |
| |
| /* input device required */ |
| if (tfa98xx->input) |
| dev_info(tfa98xx->codec->dev, "Input device already registered, skipping\n"); |
| else |
| tfa98xx_register_inputdev(tfa98xx); |
| } |
| |
| static void tfa98xx_inputdev_check_register(struct tfa98xx *tfa98xx) |
| { |
| __tfa98xx_inputdev_check_register(tfa98xx, false); |
| } |
| |
| static void tfa98xx_inputdev_unregister(struct tfa98xx *tfa98xx) |
| { |
| __tfa98xx_inputdev_check_register(tfa98xx, true); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| /* OTC reporting |
| * Returns the MTP0 OTC bit value |
| */ |
| static int tfa98xx_dbgfs_otc_get(void *data, u64 *val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| int value; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_OTC); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (value < 0) { |
| pr_err("[0x%x] Unable to check DSP access: %d\n", tfa98xx->i2c->addr, value); |
| return -EIO; |
| } |
| |
| *val = value; |
| pr_debug("[0x%x] OTC : %d\n", tfa98xx->i2c->addr, value); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_otc_set(void *data, u64 val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| enum tfa_error err; |
| |
| if (val != 0 && val != 1) { |
| pr_err("[0x%x] Unexpected value %llu\n", tfa98xx->i2c->addr, val); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| err = tfa_dev_mtp_set(tfa98xx->tfa, TFA_MTP_OTC, val); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (err != tfa_error_ok) { |
| pr_err("[0x%x] Unable to check DSP access: %d\n", tfa98xx->i2c->addr, err); |
| return -EIO; |
| } |
| |
| pr_debug("[0x%x] OTC < %llu\n", tfa98xx->i2c->addr, val); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_mtpex_get(void *data, u64 *val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| int value; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| value = tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_EX); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (value < 0) { |
| pr_err("[0x%x] Unable to check DSP access: %d\n", tfa98xx->i2c->addr, value); |
| return -EIO; |
| } |
| |
| |
| *val = value; |
| pr_debug("[0x%x] MTPEX : %d\n", tfa98xx->i2c->addr, value); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_mtpex_set(void *data, u64 val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| enum tfa_error err; |
| |
| if (val != 0) { |
| pr_err("[0x%x] Can only clear MTPEX (0 value expected)\n", tfa98xx->i2c->addr); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| err = tfa_dev_mtp_set(tfa98xx->tfa, TFA_MTP_EX, val); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (err != tfa_error_ok) { |
| pr_err("[0x%x] Unable to check DSP access: %d\n", tfa98xx->i2c->addr, err); |
| return -EIO; |
| } |
| |
| pr_debug("[0x%x] MTPEX < 0\n", tfa98xx->i2c->addr); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_temp_get(void *data, u64 *val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| *val = tfa98xx_get_exttemp(tfa98xx->tfa); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| pr_debug("[0x%x] TEMP : %llu\n", tfa98xx->i2c->addr, *val); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_temp_set(void *data, u64 val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa98xx_set_exttemp(tfa98xx->tfa, (short)val); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| pr_debug("[0x%x] TEMP < %llu\n", tfa98xx->i2c->addr, val); |
| |
| return 0; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_start_set(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| enum tfa_error ret; |
| char buf[32]; |
| const char ref[] = "please calibrate now"; |
| int buf_size, cal_profile = 0; |
| |
| /* check string length, and account for eol */ |
| if (count > sizeof(ref) + 1 || count < (sizeof(ref) - 1)) |
| return -EINVAL; |
| |
| buf_size = min(count, (size_t)(sizeof(buf) - 1)); |
| if (copy_from_user(buf, user_buf, buf_size)) |
| return -EFAULT; |
| buf[buf_size] = 0; |
| |
| /* Compare string, excluding the trailing \0 and the potentials eol */ |
| if (strncmp(buf, ref, sizeof(ref) - 1)) |
| return -EINVAL; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| ret = (enum tfa_error)tfa_calibrate(tfa98xx->tfa); |
| if (ret == tfa_error_ok) { |
| cal_profile = tfaContGetCalProfile(tfa98xx->tfa); |
| if (cal_profile < 0) { |
| pr_warn("[0x%x] Calibration profile not found\n", |
| tfa98xx->i2c->addr); |
| } |
| |
| ret = tfa98xx_tfa_start(tfa98xx, cal_profile, tfa98xx->vstep); |
| } |
| if (ret == tfa_error_ok) |
| tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (ret) { |
| pr_info("[0x%x] Calibration start failed (%d)\n", tfa98xx->i2c->addr, ret); |
| return -EIO; |
| } else { |
| pr_info("[0x%x] Calibration started\n", tfa98xx->i2c->addr); |
| } |
| |
| return count; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_r_read(struct file *file, |
| char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| char *str; |
| uint16_t status; |
| int ret; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| |
| /* Need to ensure DSP is access-able, use mtp read access for this |
| * purpose |
| */ |
| ret = tfa98xx_get_mtp(tfa98xx->tfa, &status); |
| if (ret) { |
| ret = -EIO; |
| pr_err("[0x%x] MTP read failed\n", tfa98xx->i2c->addr); |
| goto r_c_err; |
| } |
| |
| ret = tfaRunSpeakerCalibration(tfa98xx->tfa); |
| if (ret) { |
| ret = -EIO; |
| pr_err("[0x%x] calibration failed\n", tfa98xx->i2c->addr); |
| goto r_c_err; |
| } |
| |
| str = kmalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!str) { |
| ret = -ENOMEM; |
| pr_err("[0x%x] memory allocation failed\n", tfa98xx->i2c->addr); |
| goto r_c_err; |
| } |
| |
| if (tfa98xx->tfa->spkr_count > 1) { |
| ret = snprintf(str, PAGE_SIZE, |
| "Prim:%d mOhms, Sec:%d mOhms\n", |
| tfa98xx->tfa->mohm[0], |
| tfa98xx->tfa->mohm[1]); |
| } else { |
| ret = snprintf(str, PAGE_SIZE, |
| "Prim:%d mOhms\n", |
| tfa98xx->tfa->mohm[0]); |
| } |
| |
| pr_debug("[0x%x] calib_done: %s", tfa98xx->i2c->addr, str); |
| |
| if (ret < 0) |
| goto r_err; |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, str, ret); |
| |
| r_err: |
| kfree(str); |
| r_c_err: |
| mutex_unlock(&tfa98xx->dsp_lock); |
| return ret; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_version_read(struct file *file, |
| char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| char str[] = TFA98XX_VERSION "\n"; |
| int ret; |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, str, sizeof(str)); |
| |
| return ret; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_dsp_state_get(struct file *file, |
| char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| int ret = 0; |
| char *str; |
| |
| switch (tfa98xx->dsp_init) { |
| case TFA98XX_DSP_INIT_STOPPED: |
| str = "Stopped\n"; |
| break; |
| case TFA98XX_DSP_INIT_RECOVER: |
| str = "Recover requested\n"; |
| break; |
| case TFA98XX_DSP_INIT_FAIL: |
| str = "Failed init\n"; |
| break; |
| case TFA98XX_DSP_INIT_PENDING: |
| str = "Pending init\n"; |
| break; |
| case TFA98XX_DSP_INIT_DONE: |
| str = "Init complete\n"; |
| break; |
| default: |
| str = "Invalid\n"; |
| } |
| |
| pr_debug("[0x%x] dsp_state : %s\n", tfa98xx->i2c->addr, str); |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, str, strlen(str)); |
| return ret; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_dsp_state_set(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| enum tfa_error ret; |
| char buf[32]; |
| const char start_cmd[] = "start"; |
| const char stop_cmd[] = "stop"; |
| const char mon_start_cmd[] = "monitor start"; |
| const char mon_stop_cmd[] = "monitor stop"; |
| int buf_size; |
| |
| buf_size = min(count, (size_t)(sizeof(buf) - 1)); |
| if (copy_from_user(buf, user_buf, buf_size)) |
| return -EFAULT; |
| buf[buf_size] = 0; |
| |
| /* Compare strings, excluding the trailing \0 */ |
| if (!strncmp(buf, start_cmd, sizeof(start_cmd) - 1)) { |
| pr_info("[0x%x] Manual triggering of dsp start...\n", tfa98xx->i2c->addr); |
| mutex_lock(&tfa98xx->dsp_lock); |
| ret = tfa98xx_tfa_start(tfa98xx, tfa98xx->profile, tfa98xx->vstep); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| pr_debug("[0x%x] tfa_dev_start complete: %d\n", tfa98xx->i2c->addr, ret); |
| } else if (!strncmp(buf, stop_cmd, sizeof(stop_cmd) - 1)) { |
| pr_info("[0x%x] Manual triggering of dsp stop...\n", tfa98xx->i2c->addr); |
| mutex_lock(&tfa98xx->dsp_lock); |
| ret = tfa_dev_stop(tfa98xx->tfa); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| pr_debug("[0x%x] tfa_dev_stop complete: %d\n", tfa98xx->i2c->addr, ret); |
| } else if (!strncmp(buf, mon_start_cmd, sizeof(mon_start_cmd) - 1)) { |
| pr_info("[0x%x] Manual start of monitor thread...\n", tfa98xx->i2c->addr); |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->monitor_work, HZ); |
| } else if (!strncmp(buf, mon_stop_cmd, sizeof(mon_stop_cmd) - 1)) { |
| pr_info("[0x%x] Manual stop of monitor thread...\n", tfa98xx->i2c->addr); |
| cancel_delayed_work_sync(&tfa98xx->monitor_work); |
| } else { |
| return -EINVAL; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_fw_state_get(struct file *file, |
| char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| char *str; |
| |
| switch (tfa98xx->dsp_fw_state) { |
| case TFA98XX_DSP_FW_NONE: |
| str = "None\n"; |
| break; |
| case TFA98XX_DSP_FW_PENDING: |
| str = "Pending\n"; |
| break; |
| case TFA98XX_DSP_FW_FAIL: |
| str = "Fail\n"; |
| break; |
| case TFA98XX_DSP_FW_OK: |
| str = "Ok\n"; |
| break; |
| default: |
| str = "Invalid\n"; |
| } |
| |
| pr_debug("[0x%x] fw_state : %s", tfa98xx->i2c->addr, str); |
| |
| return simple_read_from_buffer(user_buf, count, ppos, str, strlen(str)); |
| } |
| |
| static ssize_t tfa98xx_dbgfs_rpc_read(struct file *file, |
| char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| int ret = 0; |
| uint8_t *buffer; |
| enum Tfa98xx_Error error; |
| |
| if (tfa98xx->tfa == NULL) { |
| pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr); |
| return -ENODEV; |
| } |
| |
| if (count == 0) |
| return 0; |
| |
| buffer = kmalloc(count, GFP_KERNEL); |
| if (buffer == NULL) { |
| pr_debug("[0x%x] can not allocate memory\n", tfa98xx->i2c->addr); |
| return -ENOMEM; |
| } |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| error = dsp_msg_read(tfa98xx->tfa, count, buffer); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| if (error != Tfa98xx_Error_Ok) { |
| pr_debug("[0x%x] dsp_msg_read error: %d\n", tfa98xx->i2c->addr, error); |
| kfree(buffer); |
| return -EFAULT; |
| } |
| |
| ret = copy_to_user(user_buf, buffer, count); |
| kfree(buffer); |
| if (ret) |
| return -EFAULT; |
| |
| *ppos += count; |
| return count; |
| } |
| |
| static ssize_t tfa98xx_dbgfs_rpc_send(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct i2c_client *i2c = file->private_data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| nxpTfaFileDsc_t *msg_file; |
| enum Tfa98xx_Error error; |
| int err = 0; |
| |
| if (tfa98xx->tfa == NULL) { |
| pr_debug("[0x%x] dsp is not available\n", tfa98xx->i2c->addr); |
| return -ENODEV; |
| } |
| |
| if (count == 0) |
| return 0; |
| |
| /* msg_file.name is not used */ |
| msg_file = kmalloc(count + sizeof(nxpTfaFileDsc_t), GFP_KERNEL); |
| if (msg_file == NULL) { |
| pr_debug("[0x%x] can not allocate memory\n", tfa98xx->i2c->addr); |
| return -ENOMEM; |
| } |
| msg_file->size = count; |
| |
| if (copy_from_user(msg_file->data, user_buf, count)) |
| return -EFAULT; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| if ((msg_file->data[0] == 'M') && (msg_file->data[1] == 'G')) { |
| /* int vstep_idx, int vstep_msg_idx both 0 */ |
| error = tfaContWriteFile(tfa98xx->tfa, msg_file, 0, 0); |
| if (error != Tfa98xx_Error_Ok) { |
| pr_debug("[0x%x] tfaContWriteFile error: %d\n", |
| tfa98xx->i2c->addr, error); |
| err = -EIO; |
| } |
| } else { |
| error = dsp_msg(tfa98xx->tfa, msg_file->size, msg_file->data); |
| if (error != Tfa98xx_Error_Ok) { |
| pr_debug("[0x%x] dsp_msg error: %d\n", tfa98xx->i2c->addr, error); |
| err = -EIO; |
| } |
| } |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| kfree(msg_file); |
| |
| if (err) |
| return err; |
| return count; |
| } |
| /* -- RPC */ |
| |
| static int tfa98xx_dbgfs_pga_gain_get(void *data, u64 *val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| unsigned int value; |
| |
| value = tfa_get_pga_gain(tfa98xx->tfa); |
| if (value < 0) |
| return -EINVAL; |
| |
| *val = value; |
| return 0; |
| } |
| |
| static int tfa98xx_dbgfs_pga_gain_set(void *data, u64 val) |
| { |
| struct i2c_client *i2c = (struct i2c_client *)data; |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| uint16_t value; |
| int err; |
| |
| value = val & 0xffff; |
| if (value > 7) |
| return -EINVAL; |
| |
| err = tfa_set_pga_gain(tfa98xx->tfa, value); |
| if (err < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_otc_fops, tfa98xx_dbgfs_otc_get, |
| tfa98xx_dbgfs_otc_set, "%llu\n"); |
| DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_mtpex_fops, tfa98xx_dbgfs_mtpex_get, |
| tfa98xx_dbgfs_mtpex_set, "%llu\n"); |
| DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_calib_temp_fops, tfa98xx_dbgfs_temp_get, |
| tfa98xx_dbgfs_temp_set, "%llu\n"); |
| |
| DEFINE_SIMPLE_ATTRIBUTE(tfa98xx_dbgfs_pga_gain_fops, tfa98xx_dbgfs_pga_gain_get, |
| tfa98xx_dbgfs_pga_gain_set, "%llu\n"); |
| |
| static const struct file_operations tfa98xx_dbgfs_calib_start_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .write = tfa98xx_dbgfs_start_set, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct file_operations tfa98xx_dbgfs_r_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = tfa98xx_dbgfs_r_read, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct file_operations tfa98xx_dbgfs_version_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = tfa98xx_dbgfs_version_read, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct file_operations tfa98xx_dbgfs_dsp_state_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = tfa98xx_dbgfs_dsp_state_get, |
| .write = tfa98xx_dbgfs_dsp_state_set, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct file_operations tfa98xx_dbgfs_fw_state_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = tfa98xx_dbgfs_fw_state_get, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct file_operations tfa98xx_dbgfs_rpc_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = tfa98xx_dbgfs_rpc_read, |
| .write = tfa98xx_dbgfs_rpc_send, |
| .llseek = default_llseek, |
| }; |
| |
| static void tfa98xx_debug_init(struct tfa98xx *tfa98xx, |
| struct i2c_client *i2c) |
| { |
| char name[50]; |
| |
| scnprintf(name, MAX_CONTROL_NAME, "%s-%x", i2c->name, i2c->addr); |
| tfa98xx->dbg_dir = debugfs_create_dir(name, NULL); |
| debugfs_create_file("OTC", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_calib_otc_fops); |
| debugfs_create_file("MTPEX", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_calib_mtpex_fops); |
| debugfs_create_file("TEMP", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_calib_temp_fops); |
| debugfs_create_file("calibrate", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_calib_start_fops); |
| debugfs_create_file("R", S_IRUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_r_fops); |
| debugfs_create_file("version", S_IRUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_version_fops); |
| debugfs_create_file("dsp-state", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_dsp_state_fops); |
| debugfs_create_file("fw-state", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_fw_state_fops); |
| debugfs_create_file("rpc", S_IRUGO | S_IWUGO, tfa98xx->dbg_dir, |
| i2c, &tfa98xx_dbgfs_rpc_fops); |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_SAAM_AVAILABLE) { |
| dev_dbg(tfa98xx->dev, "Adding pga_gain debug interface\n"); |
| debugfs_create_file("pga_gain", S_IRUGO, tfa98xx->dbg_dir, |
| tfa98xx->i2c, |
| &tfa98xx_dbgfs_pga_gain_fops); |
| } |
| } |
| |
| static void tfa98xx_debug_remove(struct tfa98xx *tfa98xx) |
| { |
| if (tfa98xx->dbg_dir) |
| debugfs_remove_recursive(tfa98xx->dbg_dir); |
| } |
| #endif |
| |
| |
| /* copies the profile basename (i.e. part until .) into buf */ |
| static void get_profile_basename(char *buf, char *profile) |
| { |
| int cp_len = 0, idx = 0; |
| char *pch; |
| |
| pch = strchr(profile, '.'); |
| idx = pch - profile; |
| cp_len = (pch != NULL) ? idx : (int)strlen(profile); |
| memcpy(buf, profile, cp_len); |
| buf[cp_len] = 0; |
| } |
| |
| /* return the profile name accociated with id from the profile list */ |
| static int get_profile_from_list(char *buf, int id) |
| { |
| struct tfa98xx_baseprofile *bprof; |
| |
| list_for_each_entry(bprof, &profile_list, list) { |
| if (bprof->item_id == id) { |
| strcpy(buf, bprof->basename); |
| return 0; |
| } |
| } |
| |
| return ERR; |
| } |
| |
| /* search for the profile in the profile list */ |
| static int is_profile_in_list(char *profile, int len) |
| { |
| struct tfa98xx_baseprofile *bprof; |
| |
| list_for_each_entry(bprof, &profile_list, list) { |
| |
| if ((len == bprof->len) && (0 == strncmp(bprof->basename, |
| profile, len))) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * for the profile with id, look if the requested samplerate is |
| * supported, if found return the (container)profile for this |
| * samplerate, on error or if not found return -1 |
| */ |
| static int get_profile_id_for_sr(int id, unsigned int rate) |
| { |
| int idx = 0; |
| struct tfa98xx_baseprofile *bprof; |
| |
| list_for_each_entry(bprof, &profile_list, list) { |
| if (id == bprof->item_id) { |
| idx = tfa98xx_get_fssel(rate); |
| if (idx < 0) { |
| /* samplerate not supported */ |
| return ERR; |
| } |
| |
| return bprof->sr_rate_sup[idx]; |
| } |
| } |
| |
| /* profile not found */ |
| return ERR; |
| } |
| |
| /* check if this profile is a calibration profile */ |
| static int is_calibration_profile(char *profile) |
| { |
| if (strstr(profile, ".cal") != NULL) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * adds the (container)profile index of the samplerate found in |
| * the (container)profile to a fixed samplerate table in the (mixer)profile |
| */ |
| static int add_sr_to_profile(struct tfa98xx *tfa98xx, char *basename, |
| int len, int profile) |
| { |
| struct tfa98xx_baseprofile *bprof; |
| int idx = 0; |
| unsigned int sr = 0; |
| |
| list_for_each_entry(bprof, &profile_list, list) { |
| if ((len == bprof->len) && (0 == strncmp(bprof->basename, |
| basename, len))) { |
| /* add supported samplerate for this profile */ |
| sr = tfa98xx_get_profile_sr(tfa98xx->tfa, profile); |
| if (!sr) { |
| pr_err("unable to identify supported sample rate for %s\n", |
| bprof->basename); |
| return ERR; |
| } |
| |
| /* get the index for this samplerate */ |
| idx = tfa98xx_get_fssel(sr); |
| if (idx < 0 || idx >= TFA98XX_NUM_RATES) { |
| pr_err("invalid index for samplerate %d\n", idx); |
| return ERR; |
| } |
| |
| /* enter the (container)profile for this samplerate |
| * at the corresponding index |
| */ |
| bprof->sr_rate_sup[idx] = profile; |
| |
| pr_debug("added profile:samplerate = [%d:%d]\ |
| for mixer profile: %s\n", profile, sr, bprof->basename); |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0) |
| static struct snd_soc_codec *snd_soc_kcontrol_codec( |
| struct snd_kcontrol *kcontrol) |
| { |
| return snd_kcontrol_chip(kcontrol); |
| } |
| #endif |
| |
| static int tfa98xx_get_vstep(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| int mixer_profile = kcontrol->private_value; |
| int ret = 0; |
| int profile; |
| |
| profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate); |
| if (profile < 0) { |
| pr_err("tfa98xx: tfa98xx_get_vstep: invalid profile %d\ |
| (mixer_profile=%d, rate=%d)\n", profile, mixer_profile, tfa98xx->rate); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| int vstep = tfa98xx->prof_vsteps[profile]; |
| |
| ucontrol->value.integer.value[tfa98xx->tfa->dev_idx] = |
| tfacont_get_max_vstep(tfa98xx->tfa, profile) |
| - vstep - 1; |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return ret; |
| } |
| |
| static int tfa98xx_set_vstep(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| int mixer_profile = kcontrol->private_value; |
| int profile; |
| int err = 0; |
| int change = 0; |
| |
| if (no_start != 0) |
| return 0; |
| |
| profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate); |
| if (profile < 0) { |
| pr_err("tfa98xx: tfa98xx_set_vstep: invalid profile %d\ |
| (mixer_profile=%d, rate=%d)\n", profile, mixer_profile, tfa98xx->rate); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| int vstep, vsteps; |
| int ready = 0; |
| int new_vstep; |
| int value = ucontrol->value.integer.value[tfa98xx->tfa->dev_idx]; |
| |
| vstep = tfa98xx->prof_vsteps[profile]; |
| vsteps = tfacont_get_max_vstep(tfa98xx->tfa, profile); |
| |
| if (vstep == vsteps - value - 1) |
| continue; |
| |
| new_vstep = vsteps - value - 1; |
| |
| if (new_vstep < 0) |
| new_vstep = 0; |
| |
| tfa98xx->prof_vsteps[profile] = new_vstep; |
| |
| #ifndef TFA98XX_ALSA_CTRL_PROF_CHG_ON_VOL |
| if (profile == tfa98xx->profile) { |
| #endif |
| /* this is the active profile, program the new vstep */ |
| tfa98xx->vstep = new_vstep; |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa98xx_dsp_system_stable(tfa98xx->tfa, &ready); |
| |
| if (ready) { |
| err = tfa98xx_tfa_start(tfa98xx, tfa98xx->profile, |
| tfa98xx->vstep); |
| if (err) { |
| pr_err("Write vstep error: %d\n", err); |
| } else { |
| pr_debug("Succesfully changed vstep index!\n"); |
| change = 1; |
| } |
| } |
| |
| mutex_unlock(&tfa98xx->dsp_lock); |
| #ifndef TFA98XX_ALSA_CTRL_PROF_CHG_ON_VOL |
| } |
| #endif |
| pr_debug("%d: vstep:%d, (control value: %d) - profile %d\n", |
| tfa98xx->tfa->dev_idx, new_vstep, value, profile); |
| } |
| |
| if (change) { |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| } |
| |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return change; |
| } |
| |
| static int tfa98xx_info_vstep(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| |
| int mixer_profile = tfa98xx_mixer_profile; |
| int profile = get_profile_id_for_sr(mixer_profile, tfa98xx->rate); |
| if (profile < 0) { |
| pr_err("tfa98xx: tfa98xx_info_vstep: invalid profile %d\ |
| (mixer_profile=%d, rate=%d)\n", profile, mixer_profile, tfa98xx->rate); |
| return -EINVAL; |
| } |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| mutex_lock(&tfa98xx_mutex); |
| uinfo->count = tfa98xx_device_count; |
| mutex_unlock(&tfa98xx_mutex); |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = max(0, |
| tfacont_get_max_vstep(tfa98xx->tfa, profile) - 1); |
| pr_debug("vsteps count: %d [prof=%d]\n", |
| tfacont_get_max_vstep(tfa98xx->tfa, profile), |
| profile); |
| return 0; |
| } |
| |
| static int tfa98xx_get_profile(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| mutex_lock(&tfa98xx_mutex); |
| ucontrol->value.integer.value[0] = tfa98xx_mixer_profile; |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_set_profile(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| int change = 0; |
| int new_profile; |
| int prof_idx; |
| int profile_count = tfa98xx_mixer_profiles; |
| int profile = tfa98xx_mixer_profile; |
| |
| if (no_start != 0) |
| return 0; |
| |
| new_profile = ucontrol->value.integer.value[0]; |
| if (new_profile == profile) |
| return 0; |
| |
| if ((new_profile < 0) || (new_profile >= profile_count)) { |
| pr_err("not existing profile (%d)\n", new_profile); |
| return -EINVAL; |
| } |
| |
| /* get the container profile for the requested sample rate */ |
| prof_idx = get_profile_id_for_sr(new_profile, tfa98xx->rate); |
| if (prof_idx < 0) { |
| pr_err("tfa98xx: sample rate [%d] not supported for this \ |
| mixer profile [%d].\n", tfa98xx->rate, new_profile); |
| return 0; |
| } |
| pr_debug("selected container profile [%d]\n", prof_idx); |
| |
| /* update mixer profile */ |
| tfa98xx_mixer_profile = new_profile; |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| int err; |
| int ready = 0; |
| |
| /* update 'real' profile (container profile) */ |
| tfa98xx->profile = prof_idx; |
| tfa98xx->vstep = tfa98xx->prof_vsteps[prof_idx]; |
| |
| /* Don't call tfa_dev_start() if there is no clock. */ |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa98xx_dsp_system_stable(tfa98xx->tfa, &ready); |
| if (ready) { |
| /* Also re-enables the interrupts */ |
| err = tfa98xx_tfa_start(tfa98xx, prof_idx, tfa98xx->vstep); |
| if (err) { |
| pr_info("Write profile error: %d\n", err); |
| } else { |
| pr_debug("Changed to profile %d (vstep = %d)\n", |
| prof_idx, tfa98xx->vstep); |
| change = 1; |
| } |
| } |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| /* Flag DSP as invalidated as the profile change may invalidate the |
| * current DSP configuration. That way, further stream start can |
| * trigger a tfa_dev_start. |
| */ |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_INVALIDATED; |
| } |
| |
| if (change) { |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| } |
| |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return change; |
| } |
| |
| static int tfa98xx_info_profile(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| char profile_name[MAX_CONTROL_NAME] = { 0 }; |
| int count = tfa98xx_mixer_profiles, err = -1; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = count; |
| |
| if (uinfo->value.enumerated.item >= count) |
| uinfo->value.enumerated.item = count - 1; |
| |
| err = get_profile_from_list(profile_name, uinfo->value.enumerated.item); |
| if (err != 0) |
| return -EINVAL; |
| |
| strcpy(uinfo->value.enumerated.name, profile_name); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_info_stop_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| mutex_lock(&tfa98xx_mutex); |
| uinfo->count = tfa98xx_device_count; |
| mutex_unlock(&tfa98xx_mutex); |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| |
| return 0; |
| } |
| |
| static int tfa98xx_get_stop_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tfa98xx *tfa98xx; |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| ucontrol->value.integer.value[tfa98xx->tfa->dev_idx] = 0; |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_set_stop_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tfa98xx *tfa98xx; |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| int ready = 0; |
| int i = tfa98xx->tfa->dev_idx; |
| |
| pr_debug("%d: %ld\n", i, ucontrol->value.integer.value[i]); |
| |
| tfa98xx_dsp_system_stable(tfa98xx->tfa, &ready); |
| |
| if ((ucontrol->value.integer.value[i] != 0) && ready) { |
| cancel_delayed_work_sync(&tfa98xx->monitor_work); |
| |
| cancel_delayed_work_sync(&tfa98xx->init_work); |
| if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) |
| continue; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa_dev_stop(tfa98xx->tfa); |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_STOPPED; |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| |
| ucontrol->value.integer.value[i] = 0; |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 1; |
| } |
| |
| static int tfa98xx_info_cal_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| mutex_lock(&tfa98xx_mutex); |
| uinfo->count = tfa98xx_device_count; |
| mutex_unlock(&tfa98xx_mutex); |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 0xffff; /* 16 bit value */ |
| |
| return 0; |
| } |
| |
| static int tfa98xx_set_cal_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tfa98xx *tfa98xx; |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| enum tfa_error err; |
| int i = tfa98xx->tfa->dev_idx; |
| |
| tfa98xx->cal_data = (uint16_t)ucontrol->value.integer.value[i]; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| err = tfa98xx_write_re25(tfa98xx->tfa, tfa98xx->cal_data); |
| tfa98xx->set_mtp_cal = (err != tfa_error_ok); |
| if (tfa98xx->set_mtp_cal == false) { |
| pr_info("Calibration value (%d) set in mtp\n", |
| tfa98xx->cal_data); |
| } |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 1; |
| } |
| |
| static int tfa98xx_get_cal_ctl(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct tfa98xx *tfa98xx; |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| ucontrol->value.integer.value[tfa98xx->tfa->dev_idx] = |
| tfa_dev_mtp_get(tfa98xx->tfa, TFA_MTP_RE25_PRIM); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_create_controls(struct tfa98xx *tfa98xx) |
| { |
| int prof, nprof, mix_index = 0; |
| int nr_controls = 0, id = 0; |
| char *name; |
| struct tfa98xx_baseprofile *bprofile; |
| |
| /* Create the following controls: |
| * - enum control to select the active profile |
| * - one volume control for each profile hosting a vstep |
| * - Stop control on TFA1 devices |
| */ |
| |
| nr_controls = 2; /* Profile and stop control */ |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_CALIBRATION_CTL) |
| nr_controls += 1; /* calibration */ |
| |
| /* allocate the tfa98xx_controls base on the nr of profiles */ |
| nprof = tfa_cnt_get_dev_nprof(tfa98xx->tfa); |
| for (prof = 0; prof < nprof; prof++) { |
| if (tfacont_get_max_vstep(tfa98xx->tfa, prof)) |
| nr_controls++; /* Playback Volume control */ |
| } |
| |
| tfa98xx_controls = devm_kzalloc(tfa98xx->codec->dev, |
| nr_controls * sizeof(tfa98xx_controls[0]), GFP_KERNEL); |
| if (!tfa98xx_controls) |
| return -ENOMEM; |
| |
| /* Create a mixer item for selecting the active profile */ |
| name = devm_kzalloc(tfa98xx->codec->dev, MAX_CONTROL_NAME, GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| scnprintf(name, MAX_CONTROL_NAME, "%s Profile", tfa98xx->fw.name); |
| tfa98xx_controls[mix_index].name = name; |
| tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| tfa98xx_controls[mix_index].info = tfa98xx_info_profile; |
| tfa98xx_controls[mix_index].get = tfa98xx_get_profile; |
| tfa98xx_controls[mix_index].put = tfa98xx_set_profile; |
| /* save number of profiles */ |
| // tfa98xx_controls[mix_index].private_value = profs; |
| mix_index++; |
| |
| /* create mixer items for each profile that has volume */ |
| for (prof = 0; prof < nprof; prof++) { |
| /* create an new empty profile */ |
| bprofile = devm_kzalloc(tfa98xx->codec->dev, |
| sizeof(*bprofile), GFP_KERNEL); |
| if (!bprofile) |
| return -ENOMEM; |
| |
| bprofile->len = 0; |
| bprofile->item_id = -1; |
| INIT_LIST_HEAD(&bprofile->list); |
| |
| /* copy profile name into basename until the . */ |
| get_profile_basename(bprofile->basename, |
| tfa_cont_profile_name(tfa98xx, prof)); |
| bprofile->len = strlen(bprofile->basename); |
| |
| /* |
| * search the profile list for a profile with basename, if it is not |
| * found then add it to the list and add a new mixer control |
| * (if it has vsteps)also, if it is a calibration profile, |
| * do not add it to the list |
| */ |
| if ((is_profile_in_list(bprofile->basename, bprofile->len) == 0) && |
| is_calibration_profile( |
| tfa_cont_profile_name(tfa98xx, prof)) == 0) { |
| /* the profile is not present, add it to the list */ |
| list_add(&bprofile->list, &profile_list); |
| bprofile->item_id = id++; |
| |
| pr_debug("profile added [%d]: %s\n", |
| bprofile->item_id, bprofile->basename); |
| |
| if (tfacont_get_max_vstep(tfa98xx->tfa, prof)) { |
| name = devm_kzalloc(tfa98xx->codec->dev, MAX_CONTROL_NAME, |
| GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| scnprintf(name, MAX_CONTROL_NAME, "%s %s Playback Volume", |
| tfa98xx->fw.name, bprofile->basename); |
| |
| tfa98xx_controls[mix_index].name = name; |
| tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| tfa98xx_controls[mix_index].info = tfa98xx_info_vstep; |
| tfa98xx_controls[mix_index].get = tfa98xx_get_vstep; |
| tfa98xx_controls[mix_index].put = tfa98xx_set_vstep; |
| /* save profile index */ |
| tfa98xx_controls[mix_index].private_value = bprofile->item_id; |
| mix_index++; |
| } |
| } |
| |
| /* look for the basename profile in the list of mixer profiles and |
| * add the container profile index to the supported samplerates |
| * of this mixer profile */ |
| add_sr_to_profile(tfa98xx, bprofile->basename, bprofile->len, prof); |
| } |
| |
| /* set the number of user selectable profiles in the mixer */ |
| tfa98xx_mixer_profiles = id; |
| |
| /* Create a mixer item for stop control on TFA1 */ |
| name = devm_kzalloc(tfa98xx->codec->dev, MAX_CONTROL_NAME, GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| scnprintf(name, MAX_CONTROL_NAME, "%s Stop", tfa98xx->fw.name); |
| tfa98xx_controls[mix_index].name = name; |
| tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| tfa98xx_controls[mix_index].info = tfa98xx_info_stop_ctl; |
| tfa98xx_controls[mix_index].get = tfa98xx_get_stop_ctl; |
| tfa98xx_controls[mix_index].put = tfa98xx_set_stop_ctl; |
| mix_index++; |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_CALIBRATION_CTL) { |
| name = devm_kzalloc(tfa98xx->codec->dev, MAX_CONTROL_NAME, GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| scnprintf(name, MAX_CONTROL_NAME, "%s Calibration", tfa98xx->fw.name); |
| tfa98xx_controls[mix_index].name = name; |
| tfa98xx_controls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; |
| tfa98xx_controls[mix_index].info = tfa98xx_info_cal_ctl; |
| tfa98xx_controls[mix_index].get = tfa98xx_get_cal_ctl; |
| tfa98xx_controls[mix_index].put = tfa98xx_set_cal_ctl; |
| mix_index++; |
| } |
| |
| return snd_soc_add_codec_controls(tfa98xx->codec, |
| tfa98xx_controls, mix_index); |
| } |
| |
| static void *tfa98xx_devm_kstrdup(struct device *dev, char *buf) |
| { |
| char *str = devm_kzalloc(dev, strlen(buf) + 1, GFP_KERNEL); |
| if (!str) |
| return str; |
| memcpy(str, buf, strlen(buf)); |
| return str; |
| } |
| |
| static int tfa98xx_append_i2c_address(struct device *dev, |
| struct i2c_client *i2c, |
| struct snd_soc_dapm_widget *widgets, |
| int num_widgets, |
| struct snd_soc_dai_driver *dai_drv, |
| int num_dai) |
| { |
| char buf[50]; |
| int i; |
| int i2cbus = i2c->adapter->nr; |
| int addr = i2c->addr; |
| if (dai_drv && num_dai > 0) |
| for (i = 0; i < num_dai; i++) { |
| snprintf(buf, 50, "%s-%x-%x", dai_drv[i].name, i2cbus, |
| addr); |
| dai_drv[i].name = tfa98xx_devm_kstrdup(dev, buf); |
| |
| snprintf(buf, 50, "%s-%x-%x", |
| dai_drv[i].playback.stream_name, |
| i2cbus, addr); |
| dai_drv[i].playback.stream_name = tfa98xx_devm_kstrdup(dev, buf); |
| |
| snprintf(buf, 50, "%s-%x-%x", |
| dai_drv[i].capture.stream_name, |
| i2cbus, addr); |
| dai_drv[i].capture.stream_name = tfa98xx_devm_kstrdup(dev, buf); |
| } |
| |
| /* the idea behind this is convert: |
| * SND_SOC_DAPM_AIF_IN("AIF IN", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), |
| * into: |
| * SND_SOC_DAPM_AIF_IN("AIF IN", "AIF Playback-2-36", |
| * 0, SND_SOC_NOPM, 0, 0), |
| */ |
| if (widgets && num_widgets > 0) |
| for (i = 0; i < num_widgets; i++) { |
| if (!widgets[i].sname) |
| continue; |
| if ((widgets[i].id == snd_soc_dapm_aif_in) |
| || (widgets[i].id == snd_soc_dapm_aif_out)) { |
| snprintf(buf, 50, "%s-%x-%x", widgets[i].sname, |
| i2cbus, addr); |
| widgets[i].sname = tfa98xx_devm_kstrdup(dev, buf); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dapm_widget tfa98xx_dapm_widgets_common[] = { |
| /* Stream widgets */ |
| SND_SOC_DAPM_AIF_IN("AIF IN", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF OUT", "AIF Capture", 0, SND_SOC_NOPM, 0, 0), |
| |
| SND_SOC_DAPM_OUTPUT("OUTL"), |
| SND_SOC_DAPM_INPUT("AEC Loopback"), |
| }; |
| |
| static struct snd_soc_dapm_widget tfa98xx_dapm_widgets_stereo[] = { |
| SND_SOC_DAPM_OUTPUT("OUTR"), |
| }; |
| |
| static struct snd_soc_dapm_widget tfa98xx_dapm_widgets_saam[] = { |
| SND_SOC_DAPM_INPUT("SAAM MIC"), |
| }; |
| |
| static struct snd_soc_dapm_widget tfa9888_dapm_inputs[] = { |
| SND_SOC_DAPM_INPUT("DMIC1"), |
| SND_SOC_DAPM_INPUT("DMIC2"), |
| SND_SOC_DAPM_INPUT("DMIC3"), |
| SND_SOC_DAPM_INPUT("DMIC4"), |
| }; |
| |
| static const struct snd_soc_dapm_route tfa98xx_dapm_routes_common[] = { |
| { "OUTL", NULL, "AIF IN" }, |
| { "AIF OUT", NULL, "AEC Loopback" }, |
| }; |
| |
| static const struct snd_soc_dapm_route tfa98xx_dapm_routes_saam[] = { |
| { "AIF OUT", NULL, "SAAM MIC" }, |
| }; |
| |
| static const struct snd_soc_dapm_route tfa98xx_dapm_routes_stereo[] = { |
| { "OUTR", NULL, "AIF IN" }, |
| }; |
| |
| static const struct snd_soc_dapm_route tfa9888_input_dapm_routes[] = { |
| { "AIF OUT", NULL, "DMIC1" }, |
| { "AIF OUT", NULL, "DMIC2" }, |
| { "AIF OUT", NULL, "DMIC3" }, |
| { "AIF OUT", NULL, "DMIC4" }, |
| }; |
| |
| #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0) |
| static struct snd_soc_dapm_context *snd_soc_codec_get_dapm( |
| struct snd_soc_codec *codec) |
| { |
| return &codec->dapm; |
| } |
| #endif |
| |
| static void tfa98xx_add_widgets(struct tfa98xx *tfa98xx) |
| { |
| struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(tfa98xx->codec); |
| struct snd_soc_dapm_widget *widgets; |
| unsigned int num_dapm_widgets = ARRAY_SIZE(tfa98xx_dapm_widgets_common); |
| |
| widgets = devm_kzalloc(&tfa98xx->i2c->dev, |
| sizeof(struct snd_soc_dapm_widget) * |
| ARRAY_SIZE(tfa98xx_dapm_widgets_common), |
| GFP_KERNEL); |
| if (!widgets) |
| return; |
| memcpy(widgets, tfa98xx_dapm_widgets_common, |
| sizeof(struct snd_soc_dapm_widget) * |
| ARRAY_SIZE(tfa98xx_dapm_widgets_common)); |
| |
| tfa98xx_append_i2c_address(&tfa98xx->i2c->dev, |
| tfa98xx->i2c, |
| widgets, |
| num_dapm_widgets, |
| NULL, |
| 0); |
| |
| snd_soc_dapm_new_controls(dapm, widgets, |
| ARRAY_SIZE(tfa98xx_dapm_widgets_common)); |
| snd_soc_dapm_add_routes(dapm, tfa98xx_dapm_routes_common, |
| ARRAY_SIZE(tfa98xx_dapm_routes_common)); |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_STEREO_DEVICE) { |
| snd_soc_dapm_new_controls(dapm, tfa98xx_dapm_widgets_stereo, |
| ARRAY_SIZE(tfa98xx_dapm_widgets_stereo)); |
| snd_soc_dapm_add_routes(dapm, tfa98xx_dapm_routes_stereo, |
| ARRAY_SIZE(tfa98xx_dapm_routes_stereo)); |
| } |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_MULTI_MIC_INPUTS) { |
| snd_soc_dapm_new_controls(dapm, tfa9888_dapm_inputs, |
| ARRAY_SIZE(tfa9888_dapm_inputs)); |
| snd_soc_dapm_add_routes(dapm, tfa9888_input_dapm_routes, |
| ARRAY_SIZE(tfa9888_input_dapm_routes)); |
| } |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_SAAM_AVAILABLE) { |
| snd_soc_dapm_new_controls(dapm, tfa98xx_dapm_widgets_saam, |
| ARRAY_SIZE(tfa98xx_dapm_widgets_saam)); |
| snd_soc_dapm_add_routes(dapm, tfa98xx_dapm_routes_saam, |
| ARRAY_SIZE(tfa98xx_dapm_routes_saam)); |
| } |
| } |
| |
| /* I2C wrapper functions */ |
| enum Tfa98xx_Error tfa98xx_write_register16(struct tfa_device *tfa, |
| unsigned char subaddress, |
| unsigned short value) |
| { |
| enum Tfa98xx_Error error = Tfa98xx_Error_Ok; |
| struct tfa98xx *tfa98xx; |
| int ret; |
| int retries = I2C_RETRIES; |
| |
| if (tfa == NULL) { |
| pr_err("No device available\n"); |
| return Tfa98xx_Error_Fail; |
| } |
| |
| tfa98xx = (struct tfa98xx *)tfa->data; |
| if (!tfa98xx || !tfa98xx->regmap) { |
| pr_err("No tfa98xx regmap available\n"); |
| return Tfa98xx_Error_Bad_Parameter; |
| } |
| retry: |
| ret = regmap_write(tfa98xx->regmap, subaddress, value); |
| if (ret < 0) { |
| pr_warn("i2c error, retries left: %d\n", retries); |
| if (retries) { |
| retries--; |
| msleep(I2C_RETRY_DELAY); |
| goto retry; |
| } |
| return Tfa98xx_Error_Fail; |
| } |
| if (tfa98xx_kmsg_regs) |
| dev_dbg(&tfa98xx->i2c->dev, " WR reg=0x%02x, val=0x%04x %s\n", |
| subaddress, value, |
| ret < 0 ? "Error!!" : ""); |
| |
| if (tfa98xx_ftrace_regs) |
| tfa98xx_trace_printk("\tWR reg=0x%02x, val=0x%04x %s\n", |
| subaddress, value, |
| ret < 0 ? "Error!!" : ""); |
| return error; |
| } |
| |
| enum Tfa98xx_Error tfa98xx_read_register16(struct tfa_device *tfa, |
| unsigned char subaddress, |
| unsigned short *val) |
| { |
| enum Tfa98xx_Error error = Tfa98xx_Error_Ok; |
| struct tfa98xx *tfa98xx; |
| unsigned int value; |
| int retries = I2C_RETRIES; |
| int ret; |
| |
| if (tfa == NULL) { |
| pr_err("No device available\n"); |
| return Tfa98xx_Error_Fail; |
| } |
| |
| tfa98xx = (struct tfa98xx *)tfa->data; |
| if (!tfa98xx || !tfa98xx->regmap) { |
| pr_err("No tfa98xx regmap available\n"); |
| return Tfa98xx_Error_Bad_Parameter; |
| } |
| retry: |
| ret = regmap_read(tfa98xx->regmap, subaddress, &value); |
| if (ret < 0) { |
| pr_warn("i2c error at subaddress 0x%x, retries left: %d\n", |
| subaddress, retries); |
| if (retries) { |
| retries--; |
| msleep(I2C_RETRY_DELAY); |
| goto retry; |
| } |
| return Tfa98xx_Error_Fail; |
| } |
| *val = value & 0xffff; |
| |
| if (tfa98xx_kmsg_regs) |
| dev_dbg(&tfa98xx->i2c->dev, "RD reg=0x%02x, val=0x%04x %s\n", |
| subaddress, *val, |
| ret < 0 ? "Error!!" : ""); |
| if (tfa98xx_ftrace_regs) |
| tfa98xx_trace_printk("\tRD reg=0x%02x, val=0x%04x %s\n", |
| subaddress, *val, |
| ret < 0 ? "Error!!" : ""); |
| |
| return error; |
| } |
| |
| |
| /* |
| * init external dsp |
| */ |
| enum Tfa98xx_Error |
| tfa98xx_init_dsp(struct tfa_device *tfa) |
| { |
| return Tfa98xx_Error_Not_Supported; |
| } |
| |
| int tfa98xx_get_dsp_status(struct tfa_device *tfa) |
| { |
| return 0; |
| } |
| |
| /* |
| * write external dsp message |
| */ |
| enum Tfa98xx_Error |
| tfa98xx_write_dsp(struct tfa_device *tfa, int num_bytes, |
| const char *command_buffer) |
| { |
| return Tfa98xx_Error_Not_Supported; |
| } |
| |
| /* |
| * read external dsp message |
| */ |
| enum Tfa98xx_Error |
| tfa98xx_read_dsp(struct tfa_device *tfa, int num_bytes, |
| unsigned char *result_buffer) |
| { |
| return Tfa98xx_Error_Not_Supported; |
| } |
| /* |
| * write/read external dsp message |
| */ |
| enum Tfa98xx_Error |
| tfa98xx_writeread_dsp(struct tfa_device *tfa, int command_length, |
| void *command_buffer, int result_length, void *result_buffer) |
| { |
| return Tfa98xx_Error_Not_Supported; |
| } |
| |
| enum Tfa98xx_Error tfa98xx_read_data(struct tfa_device *tfa, |
| unsigned char reg, |
| int len, unsigned char value[]) |
| { |
| enum Tfa98xx_Error error = Tfa98xx_Error_Ok; |
| struct tfa98xx *tfa98xx; |
| struct i2c_client *tfa98xx_client; |
| int err; |
| int tries = 0; |
| unsigned char *reg_buf = NULL; |
| struct i2c_msg msgs[] = { |
| { |
| .flags = 0, |
| .len = 1, |
| .buf = NULL, |
| }, { |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = value, |
| }, |
| }; |
| //GRP_KERNEL also works, |
| reg_buf = (unsigned char *)kmalloc(sizeof(reg), GFP_DMA); |
| if (!reg_buf) { |
| return -ENOMEM;; |
| } |
| |
| *reg_buf = reg; |
| msgs[0].buf = reg_buf; |
| |
| if (tfa == NULL) { |
| pr_err("No device available\n"); |
| return Tfa98xx_Error_Fail; |
| } |
| |
| tfa98xx = (struct tfa98xx *)tfa->data; |
| if (tfa98xx->i2c) { |
| tfa98xx_client = tfa98xx->i2c; |
| msgs[0].addr = tfa98xx_client->addr; |
| msgs[1].addr = tfa98xx_client->addr; |
| |
| do { |
| err = i2c_transfer(tfa98xx_client->adapter, msgs, |
| ARRAY_SIZE(msgs)); |
| if (err != ARRAY_SIZE(msgs)) |
| msleep_interruptible(I2C_RETRY_DELAY); |
| } while ((err != ARRAY_SIZE(msgs)) && (++tries < I2C_RETRIES)); |
| |
| if (err != ARRAY_SIZE(msgs)) { |
| dev_err(&tfa98xx_client->dev, "read transfer error %d\n", |
| err); |
| error = Tfa98xx_Error_Fail; |
| } |
| |
| if (tfa98xx_kmsg_regs) |
| dev_dbg(&tfa98xx_client->dev, "RD-DAT reg=0x%02x, len=%d\n", |
| reg, len); |
| if (tfa98xx_ftrace_regs) |
| tfa98xx_trace_printk("\t\tRD-DAT reg=0x%02x, len=%d\n", |
| reg, len); |
| } else { |
| pr_err("No device available\n"); |
| error = Tfa98xx_Error_Fail; |
| } |
| kfree(reg_buf); |
| return error; |
| } |
| |
| enum Tfa98xx_Error tfa98xx_write_raw(struct tfa_device *tfa, |
| int len, |
| const unsigned char data[]) |
| { |
| enum Tfa98xx_Error error = Tfa98xx_Error_Ok; |
| struct tfa98xx *tfa98xx; |
| int ret; |
| int retries = I2C_RETRIES; |
| |
| |
| if (tfa == NULL) { |
| pr_err("No device available\n"); |
| return Tfa98xx_Error_Fail; |
| } |
| |
| tfa98xx = (struct tfa98xx *)tfa->data; |
| |
| retry: |
| ret = i2c_master_send(tfa98xx->i2c, data, len); |
| if (ret < 0) { |
| pr_warn("i2c error, retries left: %d\n", retries); |
| if (retries) { |
| retries--; |
| msleep(I2C_RETRY_DELAY); |
| goto retry; |
| } |
| } |
| |
| if (ret == len) { |
| if (tfa98xx_kmsg_regs) |
| dev_dbg(&tfa98xx->i2c->dev, " WR-RAW len=%d\n", len); |
| if (tfa98xx_ftrace_regs) |
| tfa98xx_trace_printk("\t\tWR-RAW len=%d\n", len); |
| return Tfa98xx_Error_Ok; |
| } |
| pr_err(" WR-RAW (len=%d) Error I2C send size mismatch %d\n", len, ret); |
| error = Tfa98xx_Error_Fail; |
| |
| return error; |
| } |
| |
| /* Interrupts management */ |
| |
| static void tfa98xx_interrupt_enable_tfa2(struct tfa98xx *tfa98xx, bool enable) |
| { |
| /* Only for 0x72 we need to enable NOCLK interrupts */ |
| if (tfa98xx->flags & TFA98XX_FLAG_REMOVE_PLOP_NOISE) |
| tfa_irq_ena(tfa98xx->tfa, tfa9912_irq_stnoclk, enable); |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_LP_MODES) { |
| /* FIXME: IELP0 does not excist for 9912 */ |
| tfa_irq_ena(tfa98xx->tfa, 36, enable); |
| tfa_irq_ena(tfa98xx->tfa, tfa9912_irq_stclpr, enable); |
| } |
| } |
| |
| /* Check if tap-detection can and shall be enabled. |
| * Configure SPK interrupt accordingly or setup polling mode |
| * Tap-detection shall be active if: |
| * - the service is enabled (tapdet_open), AND |
| * - the current profile is a tap-detection profile |
| * On TFA1 familiy of devices, activating tap-detection means enabling the SPK |
| * interrupt if available. |
| * We also update the tapdet_enabled and tapdet_poll variables. |
| */ |
| static void tfa98xx_tapdet_check_update(struct tfa98xx *tfa98xx) |
| { |
| unsigned int enable = false; |
| |
| /* Support tap-detection on TFA1 family of devices */ |
| if ((tfa98xx->flags & TFA98XX_FLAG_TAPDET_AVAILABLE) == 0) |
| return; |
| |
| if (tfa98xx->tapdet_open && |
| (tfa98xx->tapdet_profiles & (1 << tfa98xx->profile))) |
| enable = true; |
| |
| if (!gpio_is_valid(tfa98xx->irq_gpio)) { |
| /* interrupt not available, setup polling mode */ |
| tfa98xx->tapdet_poll = true; |
| if (enable) |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->tapdet_work, HZ / 10); |
| else |
| cancel_delayed_work_sync(&tfa98xx->tapdet_work); |
| dev_dbg(tfa98xx->codec->dev, |
| "Polling for tap-detection: %s (%d; 0x%x, %d)\n", |
| enable ? "enabled" : "disabled", |
| tfa98xx->tapdet_open, tfa98xx->tapdet_profiles, |
| tfa98xx->profile); |
| |
| } else { |
| dev_dbg(tfa98xx->codec->dev, |
| "Interrupt for tap-detection: %s (%d; 0x%x, %d)\n", |
| enable ? "enabled" : "disabled", |
| tfa98xx->tapdet_open, tfa98xx->tapdet_profiles, |
| tfa98xx->profile); |
| /* enabled interrupt */ |
| tfa_irq_ena(tfa98xx->tfa, tfa9912_irq_sttapdet, enable); |
| } |
| |
| /* check disabled => enabled transition to clear pending events */ |
| if (!tfa98xx->tapdet_enabled && enable) { |
| /* clear pending event if any */ |
| tfa_irq_clear(tfa98xx->tfa, tfa9912_irq_sttapdet); |
| } |
| |
| if (!tfa98xx->tapdet_poll) |
| tfa_irq_ena(tfa98xx->tfa, tfa9912_irq_sttapdet, 1); /* enable again */ |
| } |
| |
| /* global enable / disable interrupts */ |
| static void tfa98xx_interrupt_enable(struct tfa98xx *tfa98xx, bool enable) |
| { |
| if (tfa98xx->flags & TFA98XX_FLAG_SKIP_INTERRUPTS) |
| return; |
| |
| if (tfa98xx->tfa->tfa_family == 2) |
| tfa98xx_interrupt_enable_tfa2(tfa98xx, enable); |
| } |
| |
| /* Firmware management */ |
| static void tfa98xx_container_loaded(const struct firmware *cont, |
| void *context) |
| { |
| nxpTfaContainer_t *container; |
| struct tfa98xx *tfa98xx = context; |
| enum tfa_error tfa_err; |
| int container_size; |
| int ret; |
| |
| tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL; |
| |
| if (!cont) { |
| pr_err("Failed to read %s\n", fw_name); |
| return; |
| } |
| |
| pr_debug("loaded %s - size: %zu\n", fw_name, cont->size); |
| |
| mutex_lock(&tfa98xx_mutex); |
| if (tfa98xx_container == NULL) { |
| container = kzalloc(cont->size, GFP_KERNEL); |
| if (container == NULL) { |
| mutex_unlock(&tfa98xx_mutex); |
| release_firmware(cont); |
| pr_err("Error allocating memory\n"); |
| return; |
| } |
| |
| container_size = cont->size; |
| memcpy(container, cont->data, container_size); |
| release_firmware(cont); |
| |
| pr_debug("%.2s%.2s\n", container->version, container->subversion); |
| pr_debug("%.8s\n", container->customer); |
| pr_debug("%.8s\n", container->application); |
| pr_debug("%.8s\n", container->type); |
| pr_debug("%d ndev\n", container->ndev); |
| pr_debug("%d nprof\n", container->nprof); |
| |
| tfa_err = tfa_load_cnt(container, container_size); |
| if (tfa_err != tfa_error_ok) { |
| mutex_unlock(&tfa98xx_mutex); |
| kfree(container); |
| dev_err(tfa98xx->dev, "Cannot load container file, aborting\n"); |
| return; |
| } |
| |
| tfa98xx_container = container; |
| } else { |
| pr_debug("container file already loaded...\n"); |
| container = tfa98xx_container; |
| release_firmware(cont); |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| tfa98xx->tfa->cnt = container; |
| |
| /* |
| i2c transaction limited to 64k |
| (Documentation/i2c/writing-clients) |
| */ |
| tfa98xx->tfa->buffer_size = 65536; |
| |
| /* DSP messages via i2c */ |
| tfa98xx->tfa->has_msg = 0; |
| |
| if (tfa_dev_probe(tfa98xx->i2c->addr, tfa98xx->tfa) != 0) { |
| dev_err(tfa98xx->dev, "Failed to probe TFA98xx @ 0x%.2x\n", |
| tfa98xx->i2c->addr); |
| return; |
| } |
| |
| tfa98xx->tfa->dev_idx = tfa_cont_get_idx(tfa98xx->tfa); |
| if (tfa98xx->tfa->dev_idx < 0) { |
| dev_err(tfa98xx->dev, "Failed to find TFA98xx @ 0x%.2x in \ |
| container file\n", tfa98xx->i2c->addr); |
| return; |
| } |
| |
| /* Enable debug traces */ |
| tfa98xx->tfa->verbose = trace_level & 1; |
| |
| /* prefix is the application name from the cnt */ |
| tfa_cnt_get_app_name(tfa98xx->tfa, tfa98xx->fw.name); |
| |
| /* set default profile/vstep */ |
| tfa98xx->profile = 0; |
| tfa98xx->vstep = 0; |
| |
| /* Override default profile if requested */ |
| if (strcmp(dflt_prof_name, "")) { |
| unsigned int i; |
| int nprof = tfa_cnt_get_dev_nprof(tfa98xx->tfa); |
| for (i = 0; i < nprof; i++) { |
| if (strcmp(tfa_cont_profile_name(tfa98xx, i), |
| dflt_prof_name) == 0) { |
| tfa98xx->profile = i; |
| dev_info(tfa98xx->dev, |
| "changing default profile to %s (%d)\n", |
| dflt_prof_name, tfa98xx->profile); |
| break; |
| } |
| } |
| if (i >= nprof) |
| dev_info(tfa98xx->dev, |
| "Default profile override failed (%s profile not found)\n", |
| dflt_prof_name); |
| } |
| |
| tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_OK; |
| pr_debug("Firmware init complete\n"); |
| |
| if (no_start != 0) |
| return; |
| |
| /* Only controls for master device */ |
| if (tfa98xx->tfa->dev_idx == 0) |
| tfa98xx_create_controls(tfa98xx); |
| |
| tfa98xx_inputdev_check_register(tfa98xx); |
| |
| if (tfa_is_cold(tfa98xx->tfa) == 0) { |
| pr_debug("Warning: device 0x%.2x is still warm\n", tfa98xx->i2c->addr); |
| tfa_reset(tfa98xx->tfa); |
| } |
| |
| /* Preload settings using internal clock on TFA2 */ |
| if (tfa98xx->tfa->tfa_family == 2) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| ret = tfa98xx_tfa_start(tfa98xx, tfa98xx->profile, tfa98xx->vstep); |
| if (ret == Tfa98xx_Error_Not_Supported) |
| tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL; |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| |
| tfa98xx_interrupt_enable(tfa98xx, true); |
| } |
| |
| static int tfa98xx_load_container(struct tfa98xx *tfa98xx) |
| { |
| tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_PENDING; |
| |
| return request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| fw_name, tfa98xx->dev, GFP_KERNEL, |
| tfa98xx, tfa98xx_container_loaded); |
| } |
| |
| |
| static void tfa98xx_tapdet(struct tfa98xx *tfa98xx) |
| { |
| unsigned int tap_pattern; |
| int btn; |
| |
| /* check tap pattern (BTN_0 is "error" wrong tap indication */ |
| tap_pattern = tfa_get_tap_pattern(tfa98xx->tfa); |
| switch (tap_pattern) { |
| case 0xffffffff: |
| pr_info("More than 4 taps detected! (flagTapPattern = -1)\n"); |
| btn = BTN_0; |
| break; |
| case 0xfffffffe: |
| case 0xfe: |
| pr_info("Illegal tap detected!\n"); |
| btn = BTN_0; |
| break; |
| case 0: |
| pr_info("Unrecognized pattern! (flagTapPattern = 0)\n"); |
| btn = BTN_0; |
| break; |
| default: |
| pr_info("Detected pattern: %d\n", tap_pattern); |
| btn = BTN_0 + tap_pattern; |
| break; |
| } |
| |
| input_report_key(tfa98xx->input, btn, 1); |
| input_report_key(tfa98xx->input, btn, 0); |
| input_sync(tfa98xx->input); |
| |
| /* acknowledge event done by clearing interrupt */ |
| |
| } |
| |
| static void tfa98xx_tapdet_work(struct work_struct *work) |
| { |
| struct tfa98xx *tfa98xx; |
| |
| //TODO check is this is still needed for tap polling |
| tfa98xx = container_of(work, struct tfa98xx, tapdet_work.work); |
| |
| if (tfa_irq_get(tfa98xx->tfa, tfa9912_irq_sttapdet)) |
| tfa98xx_tapdet(tfa98xx); |
| |
| queue_delayed_work(tfa98xx->tfa98xx_wq, &tfa98xx->tapdet_work, HZ / 10); |
| } |
| |
| static void tfa98xx_monitor(struct work_struct *work) |
| { |
| struct tfa98xx *tfa98xx; |
| enum Tfa98xx_Error error = Tfa98xx_Error_Ok; |
| |
| tfa98xx = container_of(work, struct tfa98xx, monitor_work.work); |
| |
| /* Check for tap-detection - bypass monitor if it is active */ |
| if (!tfa98xx->input) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| error = tfa_status(tfa98xx->tfa); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| if (error == Tfa98xx_Error_DSP_not_running) { |
| if (tfa98xx->dsp_init == TFA98XX_DSP_INIT_DONE) { |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_RECOVER; |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->init_work, 0); |
| } |
| } |
| } |
| |
| /* reschedule */ |
| queue_delayed_work(tfa98xx->tfa98xx_wq, &tfa98xx->monitor_work, 5 * HZ); |
| } |
| |
| static void tfa98xx_dsp_init(struct tfa98xx *tfa98xx) |
| { |
| int ret; |
| bool failed = false; |
| bool reschedule = false; |
| bool sync = false; |
| |
| if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) { |
| pr_debug("Skipping tfa_dev_start (no FW: %d)\n", tfa98xx->dsp_fw_state); |
| return; |
| } |
| |
| if (tfa98xx->dsp_init == TFA98XX_DSP_INIT_DONE) { |
| pr_debug("Stream already started, skipping DSP power-on\n"); |
| return; |
| } |
| mutex_lock(&tfa98xx->dsp_lock); |
| |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_PENDING; |
| |
| if (tfa98xx->init_count < TF98XX_MAX_DSP_START_TRY_COUNT) { |
| /* directly try to start DSP */ |
| ret = tfa98xx_tfa_start(tfa98xx, tfa98xx->profile, tfa98xx->vstep); |
| if (ret == Tfa98xx_Error_Not_Supported) { |
| tfa98xx->dsp_fw_state = TFA98XX_DSP_FW_FAIL; |
| dev_err(&tfa98xx->i2c->dev, "Failed starting device\n"); |
| failed = true; |
| } else if (ret != Tfa98xx_Error_Ok) { |
| /* It may fail as we may not have a valid clock at that |
| * time, so re-schedule and re-try later. |
| */ |
| dev_err(&tfa98xx->i2c->dev, |
| "tfa_dev_start failed! (err %d) - %d\n", |
| ret, tfa98xx->init_count); |
| reschedule = true; |
| } else { |
| sync = true; |
| |
| /* Subsystem ready, tfa init complete */ |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_DONE; |
| dev_dbg(&tfa98xx->i2c->dev, |
| "tfa_dev_start success (%d)\n", |
| tfa98xx->init_count); |
| /* cancel other pending init works */ |
| cancel_delayed_work(&tfa98xx->init_work); |
| tfa98xx->init_count = 0; |
| } |
| } else { |
| /* exceeded max number ot start tentatives, cancel start */ |
| dev_err(&tfa98xx->i2c->dev, |
| "Failed starting device (%d)\n", |
| tfa98xx->init_count); |
| failed = true; |
| } |
| |
| if (reschedule) { |
| /* reschedule this init work for later */ |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->init_work, |
| msecs_to_jiffies(5)); |
| tfa98xx->init_count++; |
| } |
| if (failed) { |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_FAIL; |
| /* cancel other pending init works */ |
| cancel_delayed_work(&tfa98xx->init_work); |
| tfa98xx->init_count = 0; |
| } |
| mutex_unlock(&tfa98xx->dsp_lock); |
| |
| if (sync) { |
| /* check if all devices have started */ |
| bool do_sync; |
| mutex_lock(&tfa98xx_mutex); |
| |
| if (tfa98xx_sync_count < tfa98xx_device_count) |
| tfa98xx_sync_count++; |
| |
| do_sync = (tfa98xx_sync_count >= tfa98xx_device_count); |
| mutex_unlock(&tfa98xx_mutex); |
| |
| /* when all devices have started then unmute */ |
| if (do_sync) { |
| tfa98xx_sync_count = 0; |
| list_for_each_entry(tfa98xx, &tfa98xx_device_list, list) { |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa_dev_set_state(tfa98xx->tfa, TFA_STATE_UNMUTE, 0); |
| |
| /* |
| * start monitor thread to check IC status bit |
| * periodically, and re-init IC to recover if |
| * needed. |
| */ |
| if (tfa98xx->tfa->tfa_family == 1) |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->monitor_work, |
| 1 * HZ); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } |
| |
| } |
| } |
| } |
| |
| |
| static void tfa98xx_dsp_init_work(struct work_struct *work) |
| { |
| struct tfa98xx *tfa98xx = container_of(work, struct tfa98xx, |
| init_work.work); |
| |
| tfa98xx_dsp_init(tfa98xx); |
| } |
| |
| static void tfa98xx_interrupt(struct work_struct *work) |
| { |
| struct tfa98xx *tfa98xx = container_of(work, struct tfa98xx, |
| interrupt_work.work); |
| |
| pr_info("\n"); |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_TAPDET_AVAILABLE) { |
| /* check for tap interrupt */ |
| if (tfa_irq_get(tfa98xx->tfa, tfa9912_irq_sttapdet)) { |
| tfa98xx_tapdet(tfa98xx); |
| |
| /* clear interrupt */ |
| tfa_irq_clear(tfa98xx->tfa, tfa9912_irq_sttapdet); |
| } |
| } /* TFA98XX_FLAG_TAPDET_AVAILABLE */ |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_REMOVE_PLOP_NOISE) { |
| int start_triggered; |
| |
| mutex_lock(&tfa98xx->dsp_lock); |
| start_triggered = tfa_plop_noise_interrupt(tfa98xx->tfa, |
| tfa98xx->profile, tfa98xx->vstep); |
| /* Only enable when the return value is 1, |
| * otherwise the interrupt is triggered twice |
| */ |
| if (start_triggered) |
| tfa98xx_interrupt_enable(tfa98xx, true); |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } /* TFA98XX_FLAG_REMOVE_PLOP_NOISE */ |
| |
| if (tfa98xx->flags & TFA98XX_FLAG_LP_MODES) |
| tfa_lp_mode_interrupt(tfa98xx->tfa); |
| /* TFA98XX_FLAG_LP_MODES */ |
| |
| /* unmask interrupts masked in IRQ handler */ |
| tfa_irq_unmask(tfa98xx->tfa); |
| } |
| |
| static int tfa98xx_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| unsigned int sr; |
| int len, prof, nprof, idx = 0; |
| char *basename; |
| u64 formats; |
| int err; |
| |
| /* |
| * Support CODEC to CODEC links, |
| * these are called with a NULL runtime pointer. |
| */ |
| if (!substream->runtime) |
| return 0; |
| |
| if (pcm_no_constraint != 0) |
| return 0; |
| |
| switch (pcm_sample_format) { |
| case 1: |
| formats = SNDRV_PCM_FMTBIT_S24_LE; |
| break; |
| case 2: |
| formats = SNDRV_PCM_FMTBIT_S32_LE; |
| break; |
| default: |
| formats = SNDRV_PCM_FMTBIT_S16_LE; |
| break; |
| } |
| |
| err = snd_pcm_hw_constraint_mask64(substream->runtime, |
| SNDRV_PCM_HW_PARAM_FORMAT, formats); |
| if (err < 0) |
| return err; |
| |
| if (no_start != 0) |
| return 0; |
| |
| if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) { |
| dev_info(codec->dev, "Container file not loaded\n"); |
| return -EINVAL; |
| } |
| |
| basename = kzalloc(MAX_CONTROL_NAME, GFP_KERNEL); |
| if (!basename) |
| return -ENOMEM; |
| |
| /* copy profile name into basename until the . */ |
| get_profile_basename(basename, |
| tfa_cont_profile_name(tfa98xx, tfa98xx->profile)); |
| len = strlen(basename); |
| |
| /* loop over all profiles and get the supported samples rate(s) from |
| * the profiles with the same basename |
| */ |
| nprof = tfa_cnt_get_dev_nprof(tfa98xx->tfa); |
| tfa98xx->rate_constraint.list = &tfa98xx->rate_constraint_list[0]; |
| tfa98xx->rate_constraint.count = 0; |
| for (prof = 0; prof < nprof; prof++) { |
| if (0 == strncmp(basename, tfa_cont_profile_name(tfa98xx, prof), |
| len)) { |
| /* Check which sample rate is supported with current profile, |
| * and enforce this. |
| */ |
| sr = tfa98xx_get_profile_sr(tfa98xx->tfa, prof); |
| if (!sr) |
| dev_info(codec->dev, "Unable to identify \ |
| supported sample rate\n"); |
| |
| if (tfa98xx->rate_constraint.count >= TFA98XX_NUM_RATES) { |
| dev_err(codec->dev, "too many sample rates\n"); |
| } else { |
| tfa98xx->rate_constraint_list[idx++] = sr; |
| tfa98xx->rate_constraint.count += 1; |
| } |
| } |
| } |
| |
| kfree(basename); |
| |
| return snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &tfa98xx->rate_constraint); |
| } |
| |
| static int tfa98xx_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec_dai->codec); |
| |
| tfa98xx->sysclk = freq; |
| return 0; |
| } |
| |
| static int tfa98xx_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, |
| unsigned int rx_mask, int slots, int slot_width) |
| { |
| pr_debug("\n"); |
| return 0; |
| } |
| |
| static int tfa98xx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(dai->codec); |
| struct snd_soc_codec *codec = dai->codec; |
| |
| pr_debug("fmt=0x%x\n", fmt); |
| |
| /* Supported mode: regular I2S, slave, or PDM */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { |
| dev_err(codec->dev, "Invalid Codec master mode\n"); |
| return -EINVAL; |
| } |
| break; |
| case SND_SOC_DAIFMT_PDM: |
| break; |
| default: |
| dev_err(codec->dev, "Unsupported DAI format %d\n", |
| fmt & SND_SOC_DAIFMT_FORMAT_MASK); |
| return -EINVAL; |
| } |
| |
| tfa98xx->audio_mode = fmt & SND_SOC_DAIFMT_FORMAT_MASK; |
| |
| return 0; |
| } |
| |
| static int tfa98xx_get_fssel(unsigned int rate) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(rate_to_fssel); i++) { |
| if (rate_to_fssel[i].rate == rate) |
| return rate_to_fssel[i].fssel; |
| } |
| return -EINVAL; |
| } |
| |
| static int tfa98xx_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| unsigned int rate; |
| int prof_idx; |
| |
| /* Supported */ |
| rate = params_rate(params); |
| pr_debug("Requested rate: %d, sample size: %d, physical size: %d\n", |
| rate, snd_pcm_format_width(params_format(params)), |
| snd_pcm_format_physical_width(params_format(params))); |
| |
| if (no_start != 0) |
| return 0; |
| |
| /* check if samplerate is supported for this mixer profile */ |
| prof_idx = get_profile_id_for_sr(tfa98xx_mixer_profile, rate); |
| if (prof_idx < 0) { |
| pr_err("tfa98xx: invalid sample rate %d.\n", rate); |
| return -EINVAL; |
| } |
| pr_debug("mixer profile:container profile = [%d:%d]\n", |
| tfa98xx_mixer_profile, prof_idx); |
| |
| |
| /* update 'real' profile (container profile) */ |
| tfa98xx->profile = prof_idx; |
| |
| /* update to new rate */ |
| tfa98xx->rate = rate; |
| |
| return 0; |
| } |
| |
| static int tfa98xx_mute(struct snd_soc_dai *dai, int mute, int stream) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| |
| dev_dbg(&tfa98xx->i2c->dev, "%s: state: %d\n", __func__, mute); |
| |
| if (no_start) { |
| pr_debug("no_start parameter set no tfa_dev_start or tfa_dev_stop, returning\n"); |
| return 0; |
| } |
| |
| if (mute) { |
| /* stop DSP only when both playback and capture streams |
| * are deactivated |
| */ |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) |
| tfa98xx->pstream = 0; |
| else |
| tfa98xx->cstream = 0; |
| if (tfa98xx->pstream != 0 || tfa98xx->cstream != 0) |
| return 0; |
| |
| mutex_lock(&tfa98xx_mutex); |
| tfa98xx_sync_count = 0; |
| mutex_unlock(&tfa98xx_mutex); |
| |
| cancel_delayed_work_sync(&tfa98xx->monitor_work); |
| |
| cancel_delayed_work_sync(&tfa98xx->init_work); |
| if (tfa98xx->dsp_fw_state != TFA98XX_DSP_FW_OK) |
| return 0; |
| mutex_lock(&tfa98xx->dsp_lock); |
| tfa_dev_stop(tfa98xx->tfa); |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_STOPPED; |
| mutex_unlock(&tfa98xx->dsp_lock); |
| } else { |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) |
| tfa98xx->pstream = 1; |
| else |
| tfa98xx->cstream = 1; |
| |
| /* Start DSP */ |
| #if 1 |
| if (tfa98xx->dsp_init != TFA98XX_DSP_INIT_PENDING) |
| queue_delayed_work(tfa98xx->tfa98xx_wq, |
| &tfa98xx->init_work, 0); |
| #else |
| tfa98xx_dsp_init(tfa98xx); |
| #endif// |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops tfa98xx_dai_ops = { |
| .startup = tfa98xx_startup, |
| .set_fmt = tfa98xx_set_fmt, |
| .set_sysclk = tfa98xx_set_dai_sysclk, |
| .set_tdm_slot = tfa98xx_set_tdm_slot, |
| .hw_params = tfa98xx_hw_params, |
| .mute_stream = tfa98xx_mute, |
| }; |
| |
| static struct snd_soc_dai_driver tfa98xx_dai[] = { |
| { |
| .name = "tfa98xx-aif", |
| .id = 1, |
| .playback = { |
| .stream_name = "AIF Playback", |
| .channels_min = 1, |
| .channels_max = 4, |
| .rates = TFA98XX_RATES, |
| .formats = TFA98XX_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF Capture", |
| .channels_min = 1, |
| .channels_max = 4, |
| .rates = TFA98XX_RATES, |
| .formats = TFA98XX_FORMATS, |
| }, |
| .ops = &tfa98xx_dai_ops, |
| .symmetric_rates = 1, |
| #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 14, 0) |
| .symmetric_channels = 1, |
| .symmetric_samplebits = 1, |
| #endif |
| }, |
| }; |
| |
| static int tfa98xx_probe(struct snd_soc_codec *codec) |
| { |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| int ret; |
| |
| pr_debug("\n"); |
| |
| /* setup work queue, will be used to initial DSP on first boot up */ |
| tfa98xx->tfa98xx_wq = create_singlethread_workqueue("tfa98xx"); |
| if (!tfa98xx->tfa98xx_wq) |
| return -ENOMEM; |
| |
| INIT_DELAYED_WORK(&tfa98xx->init_work, tfa98xx_dsp_init_work); |
| INIT_DELAYED_WORK(&tfa98xx->monitor_work, tfa98xx_monitor); |
| INIT_DELAYED_WORK(&tfa98xx->interrupt_work, tfa98xx_interrupt); |
| INIT_DELAYED_WORK(&tfa98xx->tapdet_work, tfa98xx_tapdet_work); |
| |
| tfa98xx->codec = codec; |
| |
| ret = tfa98xx_load_container(tfa98xx); |
| pr_debug("Container loading requested: %d\n", ret); |
| |
| #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0) |
| codec->control_data = tfa98xx->regmap; |
| ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); |
| if (ret != 0) { |
| dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
| return ret; |
| } |
| #endif |
| tfa98xx_add_widgets(tfa98xx); |
| |
| dev_info(codec->dev, "tfa98xx codec registered (%s)", |
| tfa98xx->fw.name); |
| |
| return ret; |
| } |
| |
| static int tfa98xx_remove(struct snd_soc_codec *codec) |
| { |
| struct tfa98xx *tfa98xx = snd_soc_codec_get_drvdata(codec); |
| pr_debug("\n"); |
| |
| tfa98xx_interrupt_enable(tfa98xx, false); |
| |
| tfa98xx_inputdev_unregister(tfa98xx); |
| |
| cancel_delayed_work_sync(&tfa98xx->interrupt_work); |
| cancel_delayed_work_sync(&tfa98xx->monitor_work); |
| cancel_delayed_work_sync(&tfa98xx->init_work); |
| cancel_delayed_work_sync(&tfa98xx->tapdet_work); |
| |
| if (tfa98xx->tfa98xx_wq) |
| destroy_workqueue(tfa98xx->tfa98xx_wq); |
| |
| return 0; |
| } |
| |
| #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 16, 0) |
| static struct regmap *tfa98xx_get_regmap(struct device *dev) |
| { |
| struct tfa98xx *tfa98xx = dev_get_drvdata(dev); |
| |
| return tfa98xx->regmap; |
| } |
| #endif |
| static struct snd_soc_codec_driver soc_codec_dev_tfa98xx = { |
| .probe = tfa98xx_probe, |
| .remove = tfa98xx_remove, |
| #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 16, 0) |
| .get_regmap = tfa98xx_get_regmap, |
| #endif |
| }; |
| |
| |
| static bool tfa98xx_writeable_register(struct device *dev, unsigned int reg) |
| { |
| /* enable read access for all registers */ |
| return 1; |
| } |
| |
| static bool tfa98xx_readable_register(struct device *dev, unsigned int reg) |
| { |
| /* enable read access for all registers */ |
| return 1; |
| } |
| |
| static bool tfa98xx_volatile_register(struct device *dev, unsigned int reg) |
| { |
| /* enable read access for all registers */ |
| return 1; |
| } |
| |
| static const struct regmap_config tfa98xx_regmap = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| |
| .max_register = TFA98XX_MAX_REGISTER, |
| .writeable_reg = tfa98xx_writeable_register, |
| .readable_reg = tfa98xx_readable_register, |
| .volatile_reg = tfa98xx_volatile_register, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static void tfa98xx_irq_tfa2(struct tfa98xx *tfa98xx) |
| { |
| pr_info("\n"); |
| |
| /* |
| * mask interrupts |
| * will be unmasked after handling interrupts in workqueue |
| */ |
| tfa_irq_mask(tfa98xx->tfa); |
| queue_delayed_work(tfa98xx->tfa98xx_wq, &tfa98xx->interrupt_work, 0); |
| } |
| |
| |
| static irqreturn_t tfa98xx_irq(int irq, void *data) |
| { |
| struct tfa98xx *tfa98xx = data; |
| |
| if (tfa98xx->tfa->tfa_family == 2) |
| tfa98xx_irq_tfa2(tfa98xx); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tfa98xx_ext_reset(struct tfa98xx *tfa98xx) |
| { |
| if (tfa98xx && gpio_is_valid(tfa98xx->reset_gpio)) { |
| int reset = tfa98xx->reset_polarity; |
| |
| gpio_set_value_cansleep(tfa98xx->reset_gpio, reset); |
| mdelay(1); |
| gpio_set_value_cansleep(tfa98xx->reset_gpio, !reset); |
| mdelay(1); |
| } |
| return 0; |
| } |
| |
| static int tfa98xx_parse_dt(struct device *dev, struct tfa98xx *tfa98xx, |
| struct device_node *np) { |
| u32 value; |
| int ret; |
| |
| tfa98xx->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); |
| if (tfa98xx->reset_gpio < 0) |
| dev_dbg(dev, "No reset GPIO provided, will not HW reset device\n"); |
| |
| tfa98xx->irq_gpio = of_get_named_gpio(np, "irq-gpio", 0); |
| if (tfa98xx->irq_gpio < 0) |
| dev_dbg(dev, "No IRQ GPIO provided.\n"); |
| ret = of_property_read_u32(np, "reset-polarity", &value); |
| if (ret < 0) |
| tfa98xx->reset_polarity = HIGH; |
| else |
| tfa98xx->reset_polarity = (value == 0) ? LOW : HIGH; |
| |
| dev_dbg(dev, "reset-polarity:%d\n", tfa98xx->reset_polarity); |
| return 0; |
| } |
| |
| static ssize_t tfa98xx_reg_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct tfa98xx *tfa98xx = dev_get_drvdata(dev); |
| |
| if (count != 1) { |
| pr_debug("invalid register address"); |
| return -EINVAL; |
| } |
| |
| tfa98xx->reg = buf[0]; |
| |
| return 1; |
| } |
| |
| static ssize_t tfa98xx_rw_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct tfa98xx *tfa98xx = dev_get_drvdata(dev); |
| u8 *data; |
| int ret; |
| int retries = I2C_RETRIES; |
| |
| data = kmalloc(count + 1, GFP_KERNEL); |
| if (!data) { |
| pr_debug("can not allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| data[0] = tfa98xx->reg; |
| memcpy(&data[1], buf, count); |
| |
| retry: |
| ret = i2c_master_send(tfa98xx->i2c, data, count + 1); |
| if (ret < 0) { |
| pr_warn("i2c error, retries left: %d\n", retries); |
| if (retries) { |
| retries--; |
| msleep(I2C_RETRY_DELAY); |
| goto retry; |
| } |
| } |
| |
| kfree(data); |
| |
| /* the number of data bytes written without the register address */ |
| return ((ret > 1) ? count : -EIO); |
| } |
| |
| static ssize_t tfa98xx_rw_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct tfa98xx *tfa98xx = dev_get_drvdata(dev); |
| struct i2c_msg msgs[] = { |
| { |
| .addr = tfa98xx->i2c->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = &tfa98xx->reg, |
| }, |
| { |
| .addr = tfa98xx->i2c->addr, |
| .flags = I2C_M_RD, |
| .len = count, |
| .buf = buf, |
| }, |
| }; |
| int ret; |
| int retries = I2C_RETRIES; |
| retry: |
| ret = i2c_transfer(tfa98xx->i2c->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret < 0) { |
| pr_warn("i2c error, retries left: %d\n", retries); |
| if (retries) { |
| retries--; |
| msleep(I2C_RETRY_DELAY); |
| goto retry; |
| } |
| return ret; |
| } |
| /* ret contains the number of i2c transaction */ |
| /* return the number of bytes read */ |
| return ((ret > 1) ? count : -EIO); |
| } |
| |
| static struct bin_attribute dev_attr_rw = { |
| .attr = { |
| .name = "rw", |
| .mode = S_IRUSR | S_IWUSR, |
| }, |
| .size = 0, |
| .read = tfa98xx_rw_read, |
| .write = tfa98xx_rw_write, |
| }; |
| |
| static struct bin_attribute dev_attr_reg = { |
| .attr = { |
| .name = "reg", |
| .mode = S_IWUSR, |
| }, |
| .size = 0, |
| .read = NULL, |
| .write = tfa98xx_reg_write, |
| }; |
| |
| static int tfa98xx_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct snd_soc_dai_driver *dai; |
| struct tfa98xx *tfa98xx; |
| struct device_node *np = i2c->dev.of_node; |
| int irq_flags; |
| unsigned int reg; |
| int ret; |
| |
| pr_info("addr=0x%x\n", i2c->addr); |
| |
| if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) { |
| dev_err(&i2c->dev, "check_functionality failed\n"); |
| return -EIO; |
| } |
| |
| tfa98xx = devm_kzalloc(&i2c->dev, sizeof(struct tfa98xx), GFP_KERNEL); |
| if (tfa98xx == NULL) |
| return -ENOMEM; |
| |
| tfa98xx->dev = &i2c->dev; |
| tfa98xx->i2c = i2c; |
| tfa98xx->dsp_init = TFA98XX_DSP_INIT_STOPPED; |
| tfa98xx->rate = 48000; /* init to the default sample rate (48kHz) */ |
| tfa98xx->tfa = NULL; |
| |
| tfa98xx->regmap = devm_regmap_init_i2c(i2c, &tfa98xx_regmap); |
| if (IS_ERR(tfa98xx->regmap)) { |
| ret = PTR_ERR(tfa98xx->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| i2c_set_clientdata(i2c, tfa98xx); |
| mutex_init(&tfa98xx->dsp_lock); |
| init_waitqueue_head(&tfa98xx->wq); |
| |
| if (np) { |
| ret = tfa98xx_parse_dt(&i2c->dev, tfa98xx, np); |
| if (ret) { |
| dev_err(&i2c->dev, "Failed to parse DT node\n"); |
| return ret; |
| } |
| if (no_start) |
| tfa98xx->irq_gpio = -1; |
| if (no_reset) |
| tfa98xx->reset_gpio = -1; |
| } else { |
| tfa98xx->reset_gpio = -1; |
| tfa98xx->irq_gpio = -1; |
| } |
| |
| if (gpio_is_valid(tfa98xx->reset_gpio)) { |
| ret = devm_gpio_request_one(&i2c->dev, tfa98xx->reset_gpio, |
| GPIOF_OUT_INIT_LOW, "TFA98XX_RST"); |
| if (ret) |
| return ret; |
| } |
| |
| if (gpio_is_valid(tfa98xx->irq_gpio)) { |
| ret = devm_gpio_request_one(&i2c->dev, tfa98xx->irq_gpio, |
| GPIOF_DIR_IN, "TFA98XX_INT"); |
| if (ret) |
| return ret; |
| } |
| |
| /* Power up! */ |
| tfa98xx_ext_reset(tfa98xx); |
| |
| if ((no_start == 0) && (no_reset == 0)) { |
| ret = regmap_read(tfa98xx->regmap, 0x03, ®); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to read Revision register: %d\n", |
| ret); |
| return -EIO; |
| } |
| switch (reg & 0xff) { |
| case 0x72: /* tfa9872 */ |
| pr_info("TFA9872 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL; |
| tfa98xx->flags |= TFA98XX_FLAG_REMOVE_PLOP_NOISE; |
| /* tfa98xx->flags |= TFA98XX_FLAG_LP_MODES; */ |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x74: /* tfa9874 */ |
| pr_info("TFA9874 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x78: /* tfa9878 */ |
| pr_info("TFA9878 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_CALIBRATION_CTL; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x88: /* tfa9888 */ |
| pr_info("TFA9888 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_STEREO_DEVICE; |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x13: /* tfa9912 */ |
| pr_info("TFA9912 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| /* tfa98xx->flags |= TFA98XX_FLAG_TAPDET_AVAILABLE; */ |
| break; |
| case 0x94: /* tfa9894 */ |
| pr_info("TFA9894 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_MULTI_MIC_INPUTS; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x80: /* tfa9890 */ |
| case 0x81: /* tfa9890 */ |
| pr_info("TFA9890 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| break; |
| case 0x92: /* tfa9891 */ |
| pr_info("TFA9891 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_SAAM_AVAILABLE; |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| break; |
| case 0x12: /* tfa9895 */ |
| pr_info("TFA9895 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| break; |
| case 0x97: |
| pr_info("TFA9897 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| case 0x96: |
| pr_info("TFA9896 detected\n"); |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| tfa98xx->flags |= TFA98XX_FLAG_TDM_DEVICE; |
| break; |
| default: |
| pr_info("Unsupported device revision (0x%x)\n", reg & 0xff); |
| return -EINVAL; |
| } |
| } |
| |
| tfa98xx->tfa = devm_kzalloc(&i2c->dev, sizeof(struct tfa_device), |
| GFP_KERNEL); |
| if (tfa98xx->tfa == NULL) |
| return -ENOMEM; |
| |
| tfa98xx->tfa->data = (void *)tfa98xx; |
| tfa98xx->tfa->cachep = tfa98xx_cache; |
| |
| /* Modify the stream names, by appending the i2c device address. |
| * This is used with multicodec, in order to discriminate the devices. |
| * Stream names appear in the dai definition and in the stream. |
| * We create copies of original structures because each device will |
| * have its own instance of this structure, with its own address. |
| */ |
| dai = devm_kzalloc(&i2c->dev, sizeof(tfa98xx_dai), GFP_KERNEL); |
| if (!dai) |
| return -ENOMEM; |
| memcpy(dai, tfa98xx_dai, sizeof(tfa98xx_dai)); |
| |
| tfa98xx_append_i2c_address(&i2c->dev, |
| i2c, |
| NULL, |
| 0, |
| dai, |
| ARRAY_SIZE(tfa98xx_dai)); |
| |
| ret = snd_soc_register_codec(&i2c->dev, |
| &soc_codec_dev_tfa98xx, dai, |
| ARRAY_SIZE(tfa98xx_dai)); |
| |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to register TFA98xx: %d\n", ret); |
| return ret; |
| } |
| |
| if (gpio_is_valid(tfa98xx->irq_gpio) && |
| !(tfa98xx->flags & TFA98XX_FLAG_SKIP_INTERRUPTS)) { |
| /* register irq handler */ |
| irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; |
| ret = devm_request_threaded_irq(&i2c->dev, |
| gpio_to_irq(tfa98xx->irq_gpio), |
| NULL, tfa98xx_irq, irq_flags, |
| "tfa98xx", tfa98xx); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", |
| gpio_to_irq(tfa98xx->irq_gpio), ret); |
| return ret; |
| } |
| } else { |
| dev_info(&i2c->dev, "Skipping IRQ registration\n"); |
| /* disable feature support if gpio was invalid */ |
| tfa98xx->flags |= TFA98XX_FLAG_SKIP_INTERRUPTS; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| if (no_start == 0) |
| tfa98xx_debug_init(tfa98xx, i2c); |
| #endif |
| /* Register the sysfs files for climax backdoor access */ |
| ret = device_create_bin_file(&i2c->dev, &dev_attr_rw); |
| if (ret) |
| dev_info(&i2c->dev, "error creating sysfs files\n"); |
| ret = device_create_bin_file(&i2c->dev, &dev_attr_reg); |
| if (ret) |
| dev_info(&i2c->dev, "error creating sysfs files\n"); |
| |
| pr_info("%s Probe completed successfully!\n", __func__); |
| |
| INIT_LIST_HEAD(&tfa98xx->list); |
| |
| mutex_lock(&tfa98xx_mutex); |
| tfa98xx_device_count++; |
| list_add(&tfa98xx->list, &tfa98xx_device_list); |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 0; |
| } |
| |
| static int tfa98xx_i2c_remove(struct i2c_client *i2c) |
| { |
| struct tfa98xx *tfa98xx = i2c_get_clientdata(i2c); |
| |
| pr_debug("addr=0x%x\n", i2c->addr); |
| |
| tfa98xx_interrupt_enable(tfa98xx, false); |
| |
| cancel_delayed_work_sync(&tfa98xx->interrupt_work); |
| cancel_delayed_work_sync(&tfa98xx->monitor_work); |
| cancel_delayed_work_sync(&tfa98xx->init_work); |
| cancel_delayed_work_sync(&tfa98xx->tapdet_work); |
| |
| device_remove_bin_file(&i2c->dev, &dev_attr_reg); |
| device_remove_bin_file(&i2c->dev, &dev_attr_rw); |
| #ifdef CONFIG_DEBUG_FS |
| tfa98xx_debug_remove(tfa98xx); |
| #endif |
| |
| snd_soc_unregister_codec(&i2c->dev); |
| |
| if (gpio_is_valid(tfa98xx->irq_gpio)) |
| devm_gpio_free(&i2c->dev, tfa98xx->irq_gpio); |
| if (gpio_is_valid(tfa98xx->reset_gpio)) |
| devm_gpio_free(&i2c->dev, tfa98xx->reset_gpio); |
| |
| mutex_lock(&tfa98xx_mutex); |
| list_del(&tfa98xx->list); |
| tfa98xx_device_count--; |
| if (tfa98xx_device_count == 0) { |
| kfree(tfa98xx_container); |
| tfa98xx_container = NULL; |
| } |
| mutex_unlock(&tfa98xx_mutex); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id tfa98xx_i2c_id[] = { |
| { "tfa98xx", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tfa98xx_i2c_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id tfa98xx_dt_match[] = { |
| {.compatible = "nxp,tfa98xx" }, |
| {.compatible = "nxp,tfa9872" }, |
| {.compatible = "nxp,tfa9874" }, |
| {.compatible = "nxp,tfa9878" }, |
| {.compatible = "nxp,tfa9888" }, |
| {.compatible = "nxp,tfa9890" }, |
| {.compatible = "nxp,tfa9891" }, |
| {.compatible = "nxp,tfa9894" }, |
| {.compatible = "nxp,tfa9895" }, |
| {.compatible = "nxp,tfa9896" }, |
| {.compatible = "nxp,tfa9897" }, |
| {.compatible = "nxp,tfa9912" }, |
| { }, |
| }; |
| #endif |
| |
| static struct i2c_driver tfa98xx_i2c_driver = { |
| .driver = { |
| .name = "tfa98xx", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(tfa98xx_dt_match), |
| }, |
| .probe = tfa98xx_i2c_probe, |
| .remove = tfa98xx_i2c_remove, |
| .id_table = tfa98xx_i2c_id, |
| }; |
| |
| static int __init tfa98xx_i2c_init(void) |
| { |
| int ret = 0; |
| |
| pr_info("TFA98XX driver version %s\n", TFA98XX_VERSION); |
| |
| /* Enable debug traces */ |
| tfa98xx_kmsg_regs = trace_level & 2; |
| tfa98xx_ftrace_regs = trace_level & 4; |
| |
| /* Initialize kmem_cache */ |
| /* Cache name /proc/slabinfo */ |
| tfa98xx_cache = kmem_cache_create("tfa98xx_cache", |
| PAGE_SIZE, /* Structure size, we should fit in single page */ |
| 0, /* Structure alignment */ |
| (SLAB_HWCACHE_ALIGN | SLAB_RECLAIM_ACCOUNT | |
| SLAB_MEM_SPREAD), /* Cache property */ |
| NULL); /* Object constructor */ |
| if (!tfa98xx_cache) { |
| pr_err("tfa98xx can't create memory pool\n"); |
| ret = -ENOMEM; |
| } |
| |
| ret = i2c_add_driver(&tfa98xx_i2c_driver); |
| |
| return ret; |
| } |
| module_init(tfa98xx_i2c_init); |
| |
| static void __exit tfa98xx_i2c_exit(void) |
| { |
| i2c_del_driver(&tfa98xx_i2c_driver); |
| kmem_cache_destroy(tfa98xx_cache); |
| } |
| module_exit(tfa98xx_i2c_exit); |
| |
| MODULE_DESCRIPTION("ASoC TFA98XX driver"); |
| MODULE_LICENSE("GPL"); |
| |