video, sm501: add I/O functions for use on powerpc
- add read/write functions for using this driver
also on powerpc plattforms
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: linux-fbdev@vger.kernel.org
cc: devicetree-discuss@ozlabs.org
cc: Ben Dooks <ben@simtec.co.uk>
cc: Vincent Sanders <vince@simtec.co.uk>
cc: Samuel Ortiz <sameo@linux.intel.com>
cc: linux-kernel@vger.kernel.org
cc: Randy Dunlap <rdunlap@xenotime.net>
cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 5de3a76..558d5f3 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -133,10 +133,10 @@
static void sm501_dump_clk(struct sm501_devdata *sm)
{
- unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
- unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
- unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
- unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
+ unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
+ unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
+ unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
unsigned long sdclk0, sdclk1;
unsigned long pll2 = 0;
@@ -193,29 +193,29 @@
void __iomem *regs = sm->regs;
dev_info(sm->dev, "System Control %08x\n",
- readl(regs + SM501_SYSTEM_CONTROL));
+ smc501_readl(regs + SM501_SYSTEM_CONTROL));
dev_info(sm->dev, "Misc Control %08x\n",
- readl(regs + SM501_MISC_CONTROL));
+ smc501_readl(regs + SM501_MISC_CONTROL));
dev_info(sm->dev, "GPIO Control Low %08x\n",
- readl(regs + SM501_GPIO31_0_CONTROL));
+ smc501_readl(regs + SM501_GPIO31_0_CONTROL));
dev_info(sm->dev, "GPIO Control Hi %08x\n",
- readl(regs + SM501_GPIO63_32_CONTROL));
+ smc501_readl(regs + SM501_GPIO63_32_CONTROL));
dev_info(sm->dev, "DRAM Control %08x\n",
- readl(regs + SM501_DRAM_CONTROL));
+ smc501_readl(regs + SM501_DRAM_CONTROL));
dev_info(sm->dev, "Arbitration Ctrl %08x\n",
- readl(regs + SM501_ARBTRTN_CONTROL));
+ smc501_readl(regs + SM501_ARBTRTN_CONTROL));
dev_info(sm->dev, "Misc Timing %08x\n",
- readl(regs + SM501_MISC_TIMING));
+ smc501_readl(regs + SM501_MISC_TIMING));
}
static void sm501_dump_gate(struct sm501_devdata *sm)
{
dev_info(sm->dev, "CurrentGate %08x\n",
- readl(sm->regs + SM501_CURRENT_GATE));
+ smc501_readl(sm->regs + SM501_CURRENT_GATE));
dev_info(sm->dev, "CurrentClock %08x\n",
- readl(sm->regs + SM501_CURRENT_CLOCK));
+ smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
dev_info(sm->dev, "PowerModeControl %08x\n",
- readl(sm->regs + SM501_POWER_MODE_CONTROL));
+ smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
}
#else
@@ -231,7 +231,7 @@
static void sm501_sync_regs(struct sm501_devdata *sm)
{
- readl(sm->regs);
+ smc501_readl(sm->regs);
}
static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
@@ -261,11 +261,11 @@
spin_lock_irqsave(&sm->reg_lock, save);
- misc = readl(sm->regs + SM501_MISC_CONTROL);
+ misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
to = (misc & ~clear) | set;
if (to != misc) {
- writel(to, sm->regs + SM501_MISC_CONTROL);
+ smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
sm501_sync_regs(sm);
dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
@@ -294,11 +294,11 @@
spin_lock_irqsave(&sm->reg_lock, save);
- data = readl(sm->regs + reg);
+ data = smc501_readl(sm->regs + reg);
data |= set;
data &= ~clear;
- writel(data, sm->regs + reg);
+ smc501_writel(data, sm->regs + reg);
sm501_sync_regs(sm);
spin_unlock_irqrestore(&sm->reg_lock, save);
@@ -322,9 +322,9 @@
mutex_lock(&sm->clock_lock);
- mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
- gate = readl(sm->regs + SM501_CURRENT_GATE);
- clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+ mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
mode &= 3; /* get current power mode */
@@ -356,14 +356,14 @@
switch (mode) {
case 1:
- writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
- writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
mode = 0;
break;
case 2:
case 0:
- writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
- writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
mode = 1;
break;
@@ -372,7 +372,7 @@
goto already;
}
- writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+ smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
sm501_sync_regs(sm);
dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
@@ -519,9 +519,9 @@
unsigned long req_freq)
{
struct sm501_devdata *sm = dev_get_drvdata(dev);
- unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
- unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
- unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+ unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
unsigned char reg;
unsigned int pll_reg = 0;
unsigned long sm501_freq; /* the actual frequency achieved */
@@ -592,9 +592,9 @@
mutex_lock(&sm->clock_lock);
- mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
- gate = readl(sm->regs + SM501_CURRENT_GATE);
- clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+ mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
clock = clock & ~(0xFF << clksrc);
clock |= reg<<clksrc;
@@ -603,14 +603,14 @@
switch (mode) {
case 1:
- writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
- writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
mode = 0;
break;
case 2:
case 0:
- writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
- writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
mode = 1;
break;
@@ -619,10 +619,11 @@
return -1;
}
- writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+ smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
if (pll_reg)
- writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
+ smc501_writel(pll_reg,
+ sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
sm501_sync_regs(sm);
@@ -902,7 +903,7 @@
struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
unsigned long result;
- result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
+ result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
result >>= offset;
return result & 1UL;
@@ -915,13 +916,13 @@
/* check and modify if this pin is not set as gpio. */
- if (readl(smchip->control) & bit) {
+ if (smc501_readl(smchip->control) & bit) {
dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
"changing mode of gpio, bit %08lx\n", bit);
- ctrl = readl(smchip->control);
+ ctrl = smc501_readl(smchip->control);
ctrl &= ~bit;
- writel(ctrl, smchip->control);
+ smc501_writel(ctrl, smchip->control);
sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
}
@@ -942,10 +943,10 @@
spin_lock_irqsave(&smgpio->lock, save);
- val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
+ val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
if (value)
val |= bit;
- writel(val, regs);
+ smc501_writel(val, regs);
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
sm501_gpio_ensure_gpio(smchip, bit);
@@ -967,8 +968,8 @@
spin_lock_irqsave(&smgpio->lock, save);
- ddr = readl(regs + SM501_GPIO_DDR_LOW);
- writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
+ ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+ smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
sm501_gpio_ensure_gpio(smchip, bit);
@@ -994,18 +995,18 @@
spin_lock_irqsave(&smgpio->lock, save);
- val = readl(regs + SM501_GPIO_DATA_LOW);
+ val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
if (value)
val |= bit;
else
val &= ~bit;
- writel(val, regs);
+ smc501_writel(val, regs);
- ddr = readl(regs + SM501_GPIO_DDR_LOW);
- writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
+ ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+ smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
- writel(val, regs + SM501_GPIO_DATA_LOW);
+ smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
spin_unlock_irqrestore(&smgpio->lock, save);
@@ -1231,7 +1232,7 @@
for (reg = 0x00; reg < 0x70; reg += 4) {
ret = sprintf(ptr, "%08x = %08x\n",
- reg, readl(sm->regs + reg));
+ reg, smc501_readl(sm->regs + reg));
ptr += ret;
}
@@ -1255,10 +1256,10 @@
{
unsigned long tmp;
- tmp = readl(sm->regs + reg);
+ tmp = smc501_readl(sm->regs + reg);
tmp &= ~r->mask;
tmp |= r->set;
- writel(tmp, sm->regs + reg);
+ smc501_writel(tmp, sm->regs + reg);
}
/* sm501_init_regs
@@ -1299,7 +1300,7 @@
static int sm501_check_clocks(struct sm501_devdata *sm)
{
- unsigned long pwrmode = readl(sm->regs + SM501_CURRENT_CLOCK);
+ unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
@@ -1334,7 +1335,7 @@
INIT_LIST_HEAD(&sm->devices);
- devid = readl(sm->regs + SM501_DEVICEID);
+ devid = smc501_readl(sm->regs + SM501_DEVICEID);
if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
dev_err(sm->dev, "incorrect device id %08lx\n", devid);
@@ -1342,9 +1343,9 @@
}
/* disable irqs */
- writel(0, sm->regs + SM501_IRQ_MASK);
+ smc501_writel(0, sm->regs + SM501_IRQ_MASK);
- dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
+ dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
@@ -1489,7 +1490,7 @@
struct sm501_devdata *sm = platform_get_drvdata(pdev);
sm->in_suspend = 1;
- sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
+ sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
sm501_dump_regs(sm);
@@ -1513,9 +1514,9 @@
/* check to see if we are in the same state as when suspended */
- if (readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
+ if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
- writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
+ smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
/* our suspend causes the controller state to change,
* either by something attempting setup, power loss,