Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes
This pull request contains a single fix for Broadcom ARM64-based SoCs:
- Ray adds the required bus width and OOB sector size properties to the
Northstar 2 SVK reference board in order for the NAND controller to work
properly
* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index e6bbfcc..5020524 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,25 +6,25 @@
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
- "socionext,uniphier-ld4-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+ "socionext,uniphier-ld4-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
sysctrl@61840000 {
- compatible = "socionext,uniphier-ld20-sysctrl",
+ compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
reset {
- compatible = "socionext,uniphier-ld20-reset";
+ compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
@@ -32,30 +32,30 @@
};
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
- "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+ "socionext,uniphier-ld4-mio-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-sd-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-sd-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
mioctrl@59810000 {
- compatible = "socionext,uniphier-ld20-mioctrl",
+ compatible = "socionext,uniphier-ld11-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
reset {
- compatible = "socionext,uniphier-ld20-mio-reset";
+ compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
};
@@ -68,24 +68,24 @@
Required properties:
- compatible: should be one of the following:
- "socionext,uniphier-ld4-peri-reset" - for PH1-LD4 SoC.
- "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
- "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
- "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
- "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
- "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
- "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+ "socionext,uniphier-ld4-peri-reset" - for LD4 SoC.
+ "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+ "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+ "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+ "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+ "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+ "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
- #reset-cells: should be 1.
Example:
perictrl@59820000 {
- compatible = "socionext,uniphier-ld20-perictrl",
+ compatible = "socionext,uniphier-ld11-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
reset {
- compatible = "socionext,uniphier-ld20-peri-reset";
+ compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1cd38a7..25f543c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1442,6 +1442,7 @@
F: arch/arm/configs/mvebu_*_defconfig
ARM/Marvell Berlin SoC support
+M: Jisheng Zhang <jszhang@marvell.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b3df1c6..386eee6 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -239,14 +239,25 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
+ cap-sd-highspeed;
cap-mmc-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ /* All direction control is used */
+ st,sig-dir-cmd;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-dat31;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi0_default_mode>;
pinctrl-1 = <&sdi0_sleep_mode>;
- cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+ /* GPIO218 MMC_CD */
+ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -549,7 +560,7 @@
/* VMMCI level-shifter enable */
snowball_cfg3 {
pins = "GPIO217_AH12";
- ste,config = <&gpio_out_lo>;
+ ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
snowball_cfg4 {
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 2c49c36..5357ea9 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -184,11 +184,11 @@
};
&mio_clk {
- compatible = "socionext,uniphier-pro5-mio-clock";
+ compatible = "socionext,uniphier-pro5-sd-clock";
};
&mio_rst {
- compatible = "socionext,uniphier-pro5-mio-reset";
+ compatible = "socionext,uniphier-pro5-sd-reset";
};
&peri_clk {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 8789cd5..950f07b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -197,11 +197,11 @@
};
&mio_clk {
- compatible = "socionext,uniphier-pxs2-mio-clock";
+ compatible = "socionext,uniphier-pxs2-sd-clock";
};
&mio_rst {
- compatible = "socionext,uniphier-pxs2-mio-reset";
+ compatible = "socionext,uniphier-pxs2-sd-reset";
};
&peri_clk {
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index a3824e6..d7fdb2a 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -70,7 +70,7 @@
global_timer: timer@40002200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&intc>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 437d074..11f37ed 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -850,6 +850,7 @@
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
+CONFIG_E1000E=y
CONFIG_PWM_STI=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BRCMSTB=m
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 0df062d..b54db47 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -408,7 +408,7 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
{
struct clk *clk;
- int i;
+ int i, ret;
imx6q_pu_domain.reg = pu_reg;
@@ -430,13 +430,22 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
return 0;
- pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
- return of_genpd_add_provider_onecell(dev->of_node,
- &imx_gpc_onecell_data);
+ for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
+ pm_genpd_init(imx_gpc_domains[i], NULL, false);
+ ret = of_genpd_add_provider_onecell(dev->of_node,
+ &imx_gpc_onecell_data);
+ if (ret)
+ goto power_off;
+
+ return 0;
+
+power_off:
+ imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
clk_err:
while (i--)
clk_put(imx6q_pu_domain.clk[i]);
+ imx6q_pu_domain.reg = NULL;
return -EINVAL;
}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 97fd251..45801b2 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -173,7 +173,7 @@ static void __init imx6q_enet_phy_init(void)
ksz9021rn_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
ksz9031rn_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
ar8031_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
ar8035_phy_fixup);
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index f9b6bd3..541647f 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -23,6 +23,7 @@
select CACHE_L2X0
select ARM_CPU_SUSPEND
select MACH_MVEBU_ANY
+ select MVEBU_CLK_COREDIV
config MACH_ARMADA_370
bool "Marvell Armada 370 boards"
@@ -32,7 +33,6 @@
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_370
- select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 370 SoC with device tree.
@@ -50,7 +50,6 @@
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
- select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 375 SoC with device tree.
@@ -68,7 +67,6 @@
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
- select MVEBU_CLK_COREDIV
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 82dddee..3930fbb 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -1,6 +1,7 @@
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
depends on ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_GLOBAL_TIMER
select ARM_GIC
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index cfbdf02..101794f 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -190,6 +190,7 @@
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
+ select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
help
This enables support for Socionext UniPhier SoC family.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 220ac70..97d331e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -123,6 +123,7 @@
<1 14 0xf08>, /* Physical Non-Secure PPI */
<1 11 0xf08>, /* Virtual PPI */
<1 10 0xf08>; /* Hypervisor PPI */
+ fsl,erratum-a008585;
};
pmu {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 337da90..7f0dc13 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -195,6 +195,7 @@
<1 14 4>, /* Physical Non-Secure PPI, active-low */
<1 11 4>, /* Virtual PPI, active-low */
<1 10 4>; /* Hypervisor PPI, active-low */
+ fsl,erratum-a008585;
};
pmu {
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index e5e3ed6..602e2c2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -131,7 +131,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
- clocks = <&cpm_syscon0 0 3>;
+ clocks = <&cpm_syscon0 1 21>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 08fd7cf..56a1b2e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -257,18 +257,18 @@
reg = <0x59801000 0x400>;
};
- mioctrl@59810000 {
- compatible = "socionext,uniphier-mioctrl",
+ sdctrl@59810000 {
+ compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- mio_clk: clock {
- compatible = "socionext,uniphier-ld20-mio-clock";
+ sd_clk: clock {
+ compatible = "socionext,uniphier-ld20-sd-clock";
#clock-cells = <1>;
};
- mio_rst: reset {
- compatible = "socionext,uniphier-ld20-mio-reset";
+ sd_rst: reset {
+ compatible = "socionext,uniphier-ld20-sd-reset";
#reset-cells = <1>;
};
};
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 7010dca..7875105 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -111,6 +111,7 @@
config QCOM_EBI2
bool "Qualcomm External Bus Interface 2 (EBI2)"
depends on HAS_IOMEM
+ depends on ARCH_QCOM || COMPILE_TEST
help
Say y here to enable support for the Qualcomm External Bus
Interface 2, which can be used to connect things like NAND Flash,
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 8b2558e..968c3ae 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -154,7 +154,7 @@ const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_RESET_END,
};
-const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = {
+const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
@@ -360,7 +360,7 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-reset",
.data = uniphier_ld20_sys_reset_data,
},
- /* Media I/O reset */
+ /* Media I/O reset, SD reset */
{
.compatible = "socionext,uniphier-sld3-mio-reset",
.data = uniphier_sld3_mio_reset_data,
@@ -378,20 +378,20 @@ static const struct of_device_id uniphier_reset_match[] = {
.data = uniphier_sld3_mio_reset_data,
},
{
- .compatible = "socionext,uniphier-pro5-mio-reset",
- .data = uniphier_pro5_mio_reset_data,
+ .compatible = "socionext,uniphier-pro5-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
},
{
- .compatible = "socionext,uniphier-pxs2-mio-reset",
- .data = uniphier_pro5_mio_reset_data,
+ .compatible = "socionext,uniphier-pxs2-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
},
{
.compatible = "socionext,uniphier-ld11-mio-reset",
.data = uniphier_sld3_mio_reset_data,
},
{
- .compatible = "socionext,uniphier-ld20-mio-reset",
- .data = uniphier_pro5_mio_reset_data,
+ .compatible = "socionext,uniphier-ld20-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
},
/* Peripheral reset */
{