Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6

commit: ba9e358fd04190a59e605c2963a15e014139a707 [log] [tgz]
author: Linus Torvalds <torvalds@g5.osdl.org> Sun Oct 23 17:13:14 2005 -0700
committer: Linus Torvalds <torvalds@g5.osdl.org> Sun Oct 23 17:13:14 2005 -0700
tree: 05b4baf382124a9a0342777127c09832dcbd88c0
parent: 75eeec2f3fd9e8a16777219ebf1bf8395845faa7 [diff]
parent: 055787e447a6cf50aa1cc42f7d3b07f08223dd9b [diff]
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..5014bfa
--- /dev/null
+++ b/.gitignore

@@ -0,0 +1,30 @@
+#
+# NOTE! Don't add files that are generated in specific
+# subdirectories here. Add them in the ".gitignore" file
+# in that subdirectory instead.
+#
+# Normal rules
+#
+.*
+*.o
+*.a
+*.s
+*.ko
+*.mod.c
+
+#
+# Top-level generic files
+#
+vmlinux*
+System.map
+Module.symvers
+
+#
+# Generated include files
+#
+include/asm
+include/config
+include/linux/autoconf.h
+include/linux/compile.h
+include/linux/version.h
+

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7086f0a..971589a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt

@@ -17,7 +17,7 @@
 
 	usbcore.blinkenlights=1
 
-The text in square brackets at the beginning of the description state the
+The text in square brackets at the beginning of the description states the
 restrictions on the kernel for the said kernel parameter to be valid. The
 restrictions referred to are that the relevant option is valid if:
 
@@ -27,8 +27,8 @@
 	APM	Advanced Power Management support is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	CD	Appropriate CD support is enabled.
-	DEVFS	devfs support is enabled. 
-	DRM	Direct Rendering Management support is enabled. 
+	DEVFS	devfs support is enabled.
+	DRM	Direct Rendering Management support is enabled.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
@@ -71,7 +71,7 @@
 	SERIAL	Serial support is enabled.
 	SMP	The kernel is an SMP kernel.
 	SPARC	Sparc architecture is enabled.
-	SWSUSP	Software suspension is enabled.
+	SWSUSP	Software suspend is enabled.
 	TS	Appropriate touchscreen support is enabled.
 	USB	USB support is enabled.
 	USBHID	USB Human Interface Device support is enabled.
@@ -105,13 +105,13 @@
 			See header of drivers/scsi/53c7xx.c.
 			See also Documentation/scsi/ncr53c7xx.txt.
 
-	acpi=		[HW,ACPI] Advanced Configuration and Power Interface 
-			Format: { force | off | ht | strict }
+	acpi=		[HW,ACPI] Advanced Configuration and Power Interface
+			Format: { force | off | ht | strict | noirq }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
 			ht -- run only enough ACPI to enable Hyper Threading
-			strict --  Be less tolerant of platforms that are not
+			strict -- Be less tolerant of platforms that are not
 				strictly ACPI specification compliant.
 
 			See also Documentation/pm.txt, pci=noacpi
@@ -119,20 +119,23 @@
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode }
 			See Documentation/power/video.txt
- 
+
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
-			Format: { level | edge |  high | low }
+			Format: { level | edge | high | low }
 
-	acpi_irq_balance	[HW,ACPI] ACPI will balance active IRQs
-				default in APIC mode
+	acpi_irq_balance [HW,ACPI]
+			ACPI will balance active IRQs
+			default in APIC mode
 
-	acpi_irq_nobalance	[HW,ACPI] ACPI will not move active IRQs (default)
-				default in PIC mode
+	acpi_irq_nobalance [HW,ACPI]
+			ACPI will not move active IRQs (default)
+			default in PIC mode
 
-	acpi_irq_pci=	[HW,ACPI] If irq_balance, Clear listed IRQs for use by PCI
+	acpi_irq_pci=	[HW,ACPI] If irq_balance, clear listed IRQs for
+			use by PCI
 			Format: <irq>,<irq>...
 
-	acpi_irq_isa=	[HW,ACPI] If irq_balance, Mark listed IRQs used by ISA
+	acpi_irq_isa=	[HW,ACPI] If irq_balance, mark listed IRQs used by ISA
 			Format: <irq>,<irq>...
 
 	acpi_osi=	[HW,ACPI] empty param disables _OSI
@@ -145,14 +148,14 @@
 
 	acpi_dbg_layer=	[HW,ACPI]
 			Format: <int>
-			Each bit of the <int> indicates an acpi debug layer,
+			Each bit of the <int> indicates an ACPI debug layer,
 			1: enable, 0: disable. It is useful for boot time
 			debugging. After system has booted up, it can be set
 			via /proc/acpi/debug_layer.
 
 	acpi_dbg_level=	[HW,ACPI]
 			Format: <int>
-			Each bit of the <int> indicates an acpi debug level,
+			Each bit of the <int> indicates an ACPI debug level,
 			1: enable, 0: disable. It is useful for boot time
 			debugging. After system has booted up, it can be set
 			via /proc/acpi/debug_level.
@@ -161,12 +164,13 @@
 
 	acpi_generic_hotkey [HW,ACPI]
 			Allow consolidated generic hotkey driver to
-			over-ride platform specific driver.
+			override platform specific driver.
 			See also Documentation/acpi-hotkey.txt.
 
 	enable_timer_pin_1 [i386,x86-64]
 			Enable PIN 1 of APIC timer
-			Can be useful to work around chipset bugs (in particular on some ATI chipsets)
+			Can be useful to work around chipset bugs
+			(in particular on some ATI chipsets).
 			The kernel tries to set a reasonable default.
 
 	disable_timer_pin_1 [i386,x86-64]
@@ -182,7 +186,7 @@
 
 	adlib=		[HW,OSS]
 			Format: <io>
- 
+
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -192,7 +196,7 @@
 	aedsp16=	[HW,OSS] Audio Excel DSP 16
 			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
 			See also header of sound/oss/aedsp16.c.
- 
+
 	aha152x=	[HW,SCSI]
 			See Documentation/scsi/aha152x.txt.
 
@@ -205,10 +209,6 @@
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
-	AM53C974=	[HW,SCSI]
-			Format: <host-scsi-id>,<target-scsi-id>,<max-rate>,<max-offset>
-			See also header of drivers/scsi/AM53C974.c.
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -219,23 +219,24 @@
 			connected to one of 16 gameports
 			Format: <type1>,<type2>,..<type16>
 
-	apc=		[HW,SPARC] Power management functions (SPARCstation-4/5 + deriv.)
+	apc=		[HW,SPARC]
+			Power management functions (SPARCstation-4/5 + deriv.)
 			Format: noidle
 			Disable APC CPU standby support. SPARCstation-Fox does
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Change the output verbosity  whilst booting
+	apic=		[APIC,i386] Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
- 
+
 	apm=		[APM] Advanced Power Management
 			See header of arch/i386/kernel/apm.c.
 
 	applicom=	[HW]
 			Format: <mem>,<irq>
- 
+
 	arcrimi=	[HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
 			Format: <io>,<irq>,<nodeID>
 
@@ -250,38 +251,40 @@
 
 	atkbd.reset=	[HW] Reset keyboard during initialization
 
-	atkbd.set=	[HW] Select keyboard code set 
-			Format: <int> (2 = AT (default) 3 = PS/2)
+	atkbd.set=	[HW] Select keyboard code set
+			Format: <int> (2 = AT (default), 3 = PS/2)
 
 	atkbd.scroll=	[HW] Enable scroll wheel on MS Office and similar
 			keyboards
 
 	atkbd.softraw=	[HW] Choose between synthetic and real raw mode
 			Format: <bool> (0 = real, 1 = synthetic (default))
-	
-	atkbd.softrepeat=
-			[HW] Use software keyboard repeat
+
+	atkbd.softrepeat= [HW]
+			Use software keyboard repeat
 
 	autotest	[IA64]
 
 	awe=		[HW,OSS] AWE32/SB32/AWE64 wave table synth
 			Format: <io>,<memsize>,<isapnp>
- 
+
 	aztcd=		[HW,CD] Aztech CD268 CDROM driver
 			Format: <io>,0x79 (?)
 
 	baycom_epp=	[HW,AX25]
 			Format: <io>,<mode>
- 
+
 	baycom_par=	[HW,AX25] BayCom Parallel Port AX.25 Modem
 			Format: <io>,<mode>
 			See header of drivers/net/hamradio/baycom_par.c.
 
-	baycom_ser_fdx=	[HW,AX25] BayCom Serial Port AX.25 Modem (Full Duplex Mode)
+	baycom_ser_fdx=	[HW,AX25]
+			BayCom Serial Port AX.25 Modem (Full Duplex Mode)
 			Format: <io>,<irq>,<mode>[,<baud>]
 			See header of drivers/net/hamradio/baycom_ser_fdx.c.
 
-	baycom_ser_hdx=	[HW,AX25] BayCom Serial Port AX.25 Modem (Half Duplex Mode)
+	baycom_ser_hdx=	[HW,AX25]
+			BayCom Serial Port AX.25 Modem (Half Duplex Mode)
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
@@ -292,7 +295,8 @@
 	blkmtd_count=
 
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
-	bttv.radio=	Most important insmod options are available as kernel args too.
+	bttv.radio=	Most important insmod options are available as
+			kernel args too.
 	bttv.pll=	See Documentation/video4linux/bttv/Insmod-options
 	bttv.tuner=	and Documentation/video4linux/bttv/CARDLIST
 
@@ -318,15 +322,17 @@
 	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
-			0 -- check protection applied by kernel (includes any implied execute protection).
+			0 -- check protection applied by kernel (includes
+				any implied execute protection).
 			1 -- check protection requested by application.
 			Default value is set via a kernel config option.
-			Value can be changed at runtime via /selinux/checkreqprot.
- 
- 	clock=		[BUGS=IA-32, HW] gettimeofday timesource override. 
+			Value can be changed at runtime via
+				/selinux/checkreqprot.
+
+ 	clock=		[BUGS=IA-32,HW] gettimeofday timesource override.
 			Forces specified timesource (if avaliable) to be used
-			when calculating gettimeofday(). If specicified timesource
-			is not avalible, it defaults to PIT. 
+			when calculating gettimeofday(). If specicified
+			timesource is not avalible, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
 	hpet=		[IA-32,HPET] option to disable HPET and use PIT.
@@ -336,17 +342,19 @@
 			Format: { auto | [<io>,][<irq>] }
 
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
-			Format: <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
+			Format:
+			<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
 
 	com90io=	[HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
 			Format: <io>[,<irq>]
 
-	com90xx=	[HW,NET] ARCnet - COM90xx chipset (memory-mapped buffers)
+	com90xx=	[HW,NET]
+			ARCnet - COM90xx chipset (memory-mapped buffers)
 			Format: <io>[,<irq>[,<memstart>]]
 
 	condev=		[HW,S390] console device
 	conmode=
- 
+
 	console=	[KNL] Output console device and options.
 
 		tty<n>	Use the virtual console device <n>.
@@ -367,7 +375,8 @@
 			options are the same as for ttyS, above.
 
 	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
-			Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
+			Format:
+			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
 	cpia_pp=	[HW,PPT]
 			Format: { parport<nr> | auto | none }
@@ -384,10 +393,10 @@
 
 	cs89x0_media=	[HW,NET]
 			Format: { rj45 | aui | bnc }
- 
+
 	cyclades=	[HW,SERIAL] Cyclades multi-serial port adapter.
- 
-	dasd=		[HW,NET]    
+
+	dasd=		[HW,NET]
 			See header of drivers/s390/block/dasd_devmap.c.
 
 	db9.dev[2|3]=	[HW,JOY] Multisystem joystick support via parallel port
@@ -406,7 +415,7 @@
 
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
- 
+
 	digi=		[HW,SERIAL]
 			IO parameters + enable/disable command.
 
@@ -424,11 +433,11 @@
 
 	dtc3181e=	[HW,SCSI]
 
-	earlyprintk=	[IA-32, X86-64]
+	earlyprintk=	[IA-32,X86-64]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 
-			Append ,keep to not disable it when the real console
+			Append ",keep" to not disable it when the real console
 			takes over.
 
 			Only vga or serial at a time, not both.
@@ -451,7 +460,7 @@
 			Format: {"of[f]" | "sk[ipmbr]"}
 			See comment in arch/i386/boot/edd.S
 
-	eicon=		[HW,ISDN] 
+	eicon=		[HW,ISDN]
 			Format: <id>,<membase>,<irq>
 
 	eisa_irq_edge=	[PARISC,HW]
@@ -462,12 +471,13 @@
 			arch/i386/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"as"|"cfq"|"deadline"|"noop"}
-			See Documentation/block/as-iosched.txt
-			and Documentation/block/deadline-iosched.txt for details.
+			Format: {"as" | "cfq" | "deadline" | "noop"}
+			See Documentation/block/as-iosched.txt and
+			Documentation/block/deadline-iosched.txt for details.
+
 	elfcorehdr=	[IA-32]
-			Specifies physical address of start of kernel core image
-			elf header.
+			Specifies physical address of start of kernel core
+			image elf header.
 			See Documentation/kdump.txt for details.
 
 	enforcing	[SELINUX] Set initial enforcing status.
@@ -485,7 +495,7 @@
 	es1371=		[HW,OSS]
 			Format: <spdif>,[<nomix>,[<amplifier>]]
 			See also header of sound/oss/es1371.c.
- 
+
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.
@@ -526,12 +536,13 @@
 
 	gus=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma16>
- 
+
 	gvp11=		[HW,SCSI]
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
 			for IA-64, off otherwise.
+			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer
 
@@ -595,13 +606,13 @@
 	ide?=		[HW] (E)IDE subsystem
 			Format: ide?=noprobe or chipset specific parameters.
 			See Documentation/ide.txt.
-	
+
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
 			See Documentation/ide.txt.
 
 	idle=		[HW]
 			Format: idle=poll or idle=halt
- 
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
@@ -649,7 +660,7 @@
 			firmware running.
 
 	isapnp=		[ISAPNP]
-			Format: <RDP>, <reset>, <pci_scan>, <verbosity>
+			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
 	isolcpus=	[KNL,SMP] Isolate CPUs from the general scheduler.
 			Format: <cpu number>,...,<cpu number>
@@ -661,32 +672,33 @@
 			"number of CPUs in system - 1".
 
 			This option is the preferred way to isolate CPUs. The
-			alternative - manually setting the CPU mask of all tasks
-			in the system can cause problems and suboptimal load
-			balancer performance.
+			alternative -- manually setting the CPU mask of all
+			tasks in the system -- can cause problems and
+			suboptimal load balancer performance.
 
 	isp16=		[HW,CD]
 			Format: <io>,<irq>,<dma>,<setup>
 
-	iucv=		[HW,NET] 
+	iucv=		[HW,NET]
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joystick.txt.
 
 	keepinitrd	[HW,ARM]
 
-	kstack=N	[IA-32, X86-64] Print N words from the kernel stack
+	kstack=N	[IA-32,X86-64] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
 
-	lapic		[IA-32,APIC] Enable the local APIC even if BIOS disabled it.
+	lapic		[IA-32,APIC] Enable the local APIC even if BIOS
+			disabled it.
 
 	lasi=		[HW,SCSI] PARISC LASI driver for the 53c700 chip
 			Format: addr:<io>,irq:<irq>
 
-	llsc*=		[IA64]
-			See function print_params() in arch/ia64/sn/kernel/llsc4.c.
+	llsc*=		[IA64] See function print_params() in
+			arch/ia64/sn/kernel/llsc4.c.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/ramdisk.txt.
@@ -713,8 +725,9 @@
 			7 (KERN_DEBUG)		debug-level messages
 
 	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format is n, nk, nM.  n must be a power of two.  The
-			default is set in kernel config.
+			Format: { n | nk | nM }
+			n must be a power of two.  The default size
+			is set in the kernel config file.
 
 	lp=0		[LP]	Specify parallel ports to use, e.g,
 	lp=port[,port...]	lp=none,parport0 (lp0 not configured, lp1 uses
@@ -750,23 +763,23 @@
 	ltpc=		[NET]
 			Format: <io>,<irq>,<dma>
 
-	mac5380=	[HW,SCSI]
-			Format: <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+	mac5380=	[HW,SCSI] Format:
+			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	mac53c9x=	[HW,SCSI]
-			Format: <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+	mac53c9x=	[HW,SCSI] Format:
+			<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	machvec=	[IA64]
-			Force the use of a particular machine-vector (machvec) in a generic
-			kernel.  Example: machvec=hpzx1_swiotlb
+	machvec=	[IA64] Force the use of a particular machine-vector
+			(machvec) in a generic kernel.
+			Example: machvec=hpzx1_swiotlb
 
-	mad16=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
+	mad16=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick>
 
 	maui=		[HW,OSS]
 			Format: <io>,<irq>
- 
-	max_loop=       [LOOP] Maximum number of loopback devices that can
+
+	max_loop=	[LOOP] Maximum number of loopback devices that can
 			be mounted
 			Format: <1-256>
 
@@ -776,11 +789,11 @@
 	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
 			equal to this physical address is ignored.
 
-	max_luns=	[SCSI] Maximum number of LUNs to probe
+	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
 
 	max_report_luns=
-			[SCSI] Maximum number of LUNs received
+			[SCSI] Maximum number of LUNs received.
 			Should be between 1 and 16384.
 
 	mca-pentium	[BUGS=IA-32]
@@ -796,11 +809,11 @@
 
 	md=		[HW] RAID subsystems devices and level
 			See Documentation/md.txt.
- 
+
 	mdacon=		[MDA]
 			Format: <first>,<last>
 			Specifies range of consoles to be captured by the MDA.
- 
+
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
 			Amount of memory to be used when the kernel is not able
 			to see the whole system memory or for test.
@@ -851,15 +864,15 @@
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
-	MTD_Region=	[MTD]
-			Format: <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
+	MTD_Region=	[MTD] Format:
+			<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
 
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdline.c.
 
 	mtouchusb.raw_coordinates=
-			[HW] Make the MicroTouch USB driver use raw coordinates ('y', default)
-			or cooked coordinates ('n')
+			[HW] Make the MicroTouch USB driver use raw coordinates
+			('y', default) or cooked coordinates ('n')
 
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
@@ -880,7 +893,9 @@
 			Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
 			Note that mem_start is often overloaded to mean
 			something different and driver-specific.
- 
+			This usage is only documented in each driver source
+			file if at all.
+
 	nfsaddrs=	[NFS]
 			See Documentation/nfsroot.txt.
 
@@ -893,8 +908,8 @@
 			emulation library even if a 387 maths coprocessor
 			is present.
 
-	noalign		[KNL,ARM] 
- 
+	noalign		[KNL,ARM]
+
 	noapic		[SMP,APIC] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
@@ -905,19 +920,19 @@
 			on "Classic" PPC cores.
 
 	nocache		[ARM]
- 
+
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
 
 	noexec		[IA-64]
 
-	noexec		[IA-32, X86-64]
+	noexec		[IA-32,X86-64]
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable nn-executable mappings
 
 	nofxsr		[BUGS=IA-32]
 
 	nohlt		[BUGS=ARM]
- 
+
 	no-hlt		[BUGS=IA-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to
 			use it.
@@ -948,8 +963,9 @@
 
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
-	noresume	[SWSUSP] Disables resume and restore original swap space.
- 
+	noresume	[SWSUSP] Disables resume and restores original swap
+			space.
+
 	no-scroll	[VGA] Disables scrollback.
 			This is required for the Braillex ib80-piezo Braille
 			reader made by F.H. Papenmeier (Germany).
@@ -965,16 +981,16 @@
 	nousb		[USB] Disable the USB subsystem
 
 	nowb		[ARM]
- 
+
 	opl3=		[HW,OSS]
 			Format: <io>
 
 	opl3sa=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq>
 
-	opl3sa2=	[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
- 
+	opl3sa2=	[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple]
+
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
@@ -993,36 +1009,33 @@
 			Format: <parport#>
 	parkbd.mode=	[HW] Parallel port keyboard adapter mode of operation,
 			0 for XT, 1 for AT (default is AT).
-			Format: <mode> 
+			Format: <mode>
 
-	parport=0	[HW,PPT]	Specify parallel ports. 0 disables.
-	parport=auto			Use 'auto' to force the driver to use
-	parport=0xBBB[,IRQ[,DMA]]	any IRQ/DMA settings detected (the
-					default is to ignore detected IRQ/DMA
-					settings because of possible
-					conflicts). You can specify the base
-					address, IRQ, and DMA settings; IRQ and
-					DMA should be numbers, or 'auto' (for
-					using detected settings on that
-					particular port), or 'nofifo' (to avoid
-					using a FIFO even if it is detected).
-					Parallel ports are assigned in the
-					order they are specified on the command
-					line, starting with parport0.
+	parport=	[HW,PPT] Specify parallel ports. 0 disables.
+			Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
+			Use 'auto' to force the driver to use any
+			IRQ/DMA settings detected (the default is to
+			ignore detected IRQ/DMA settings because of
+			possible conflicts). You can specify the base
+			address, IRQ, and DMA settings; IRQ and DMA
+			should be numbers, or 'auto' (for using detected
+			settings on that particular port), or 'nofifo'
+			(to avoid using a FIFO even if it is detected).
+			Parallel ports are assigned in the order they
+			are specified on the command line, starting
+			with parport0.
 
-	parport_init_mode=
-			[HW,PPT]	Configure VIA parallel port to
-					operate in specific mode. This is
-					necessary on Pegasos computer where
-					firmware has no options for setting up
-					parallel port mode and sets it to
-					spp. Currently this function knows
-					686a and 8231 chips.
+	parport_init_mode=	[HW,PPT]
+			Configure VIA parallel port to operate in
+			a specific mode. This is necessary on Pegasos
+			computer where firmware has no options for setting
+			up parallel port mode and sets it to spp.
+			Currently this function knows 686a and 8231 chips.
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
-	pas2=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
- 
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
 	pas16=		[HW,SCSI]
 			See header of drivers/scsi/pas16.c.
 
@@ -1032,64 +1045,67 @@
 			See header of drivers/block/paride/pcd.c.
 			See also Documentation/paride.txt.
 
-	pci=option[,option...]		[PCI] various PCI subsystem options:
-		off			[IA-32] don't probe for the PCI bus
-		bios			[IA-32] force use of PCI BIOS, don't access
-					the hardware directly. Use this if your machine
-					has a non-standard PCI host bridge.
-		nobios			[IA-32] disallow use of PCI BIOS, only direct
-					hardware access methods are allowed. Use this
-					if you experience crashes upon bootup and you
-					suspect they are caused by the BIOS.
-		conf1			[IA-32] Force use of PCI Configuration Mechanism 1.
-		conf2			[IA-32] Force use of PCI Configuration Mechanism 2.
-		nosort			[IA-32] Don't sort PCI devices according to
-					order given by the PCI BIOS. This sorting is done
-					to get a device order compatible with older kernels.
-		biosirq			[IA-32] Use PCI BIOS calls to get the interrupt
-					routing table. These calls are known to be buggy
-					on several machines and they hang the machine when used,
-					but on other computers it's the only way to get the
-					interrupt routing table. Try this option if the kernel
-					is unable to allocate IRQs or discover secondary PCI
-					buses on your motherboard.
-		rom			[IA-32] Assign address space to expansion ROMs.
-					Use with caution as certain devices share address
-					decoders between ROMs and other resources.
-		irqmask=0xMMMM		[IA-32] Set a bit mask of IRQs allowed to be assigned
-					automatically to PCI devices. You can make the kernel
-					exclude IRQs of your ISA cards this way.
+	pci=option[,option...]	[PCI] various PCI subsystem options:
+		off		[IA-32] don't probe for the PCI bus
+		bios		[IA-32] force use of PCI BIOS, don't access
+				the hardware directly. Use this if your machine
+				has a non-standard PCI host bridge.
+		nobios		[IA-32] disallow use of PCI BIOS, only direct
+				hardware access methods are allowed. Use this
+				if you experience crashes upon bootup and you
+				suspect they are caused by the BIOS.
+		conf1		[IA-32] Force use of PCI Configuration
+				Mechanism 1.
+		conf2		[IA-32] Force use of PCI Configuration
+				Mechanism 2.
+		nosort		[IA-32] Don't sort PCI devices according to
+				order given by the PCI BIOS. This sorting is
+				done to get a device order compatible with
+				older kernels.
+		biosirq		[IA-32] Use PCI BIOS calls to get the interrupt
+				routing table. These calls are known to be buggy
+				on several machines and they hang the machine
+				when used, but on other computers it's the only
+				way to get the interrupt routing table. Try
+				this option if the kernel is unable to allocate
+				IRQs or discover secondary PCI buses on your
+				motherboard.
+		rom		[IA-32] Assign address space to expansion ROMs.
+				Use with caution as certain devices share
+				address decoders between ROMs and other
+				resources.
+		irqmask=0xMMMM	[IA-32] Set a bit mask of IRQs allowed to be
+				assigned automatically to PCI devices. You can
+				make the kernel exclude IRQs of your ISA cards
+				this way.
 		pirqaddr=0xAAAAA	[IA-32] Specify the physical address
-					of the PIRQ table (normally generated
-					by the BIOS) if it is outside the
-					F0000h-100000h range.
-		lastbus=N		[IA-32] Scan all buses till bus #N. Can be useful
-					if the kernel is unable to find your secondary buses
-					and you want to tell it explicitly which ones they are.
-		assign-busses		[IA-32] Always assign all PCI bus
-					numbers ourselves, overriding
-					whatever the firmware may have
-					done.
-		usepirqmask		[IA-32] Honor the possible IRQ mask
-					stored in the BIOS $PIR table. This is
-					needed on some systems with broken
-					BIOSes, notably some HP Pavilion N5400
-					and Omnibook XE3 notebooks. This will
-					have no effect if ACPI IRQ routing is
-					enabled.
-		noacpi			[IA-32] Do not use ACPI for IRQ routing
-					or for PCI scanning.
-		routeirq		Do IRQ routing for all PCI devices.
-					This is normally done in pci_enable_device(),
-					so this option is a temporary workaround
-					for broken drivers that don't call it.
-
-		firmware		[ARM] Do not re-enumerate the bus but
-					instead just use the configuration
-					from the bootloader. This is currently
-					used on IXP2000 systems where the
-					bus has to be configured a certain way
-					for adjunct CPUs.
+				of the PIRQ table (normally generated
+				by the BIOS) if it is outside the
+				F0000h-100000h range.
+		lastbus=N	[IA-32] Scan all buses thru bus #N. Can be
+				useful if the kernel is unable to find your
+				secondary buses and you want to tell it
+				explicitly which ones they are.
+		assign-busses	[IA-32] Always assign all PCI bus
+				numbers ourselves, overriding
+				whatever the firmware may have done.
+		usepirqmask	[IA-32] Honor the possible IRQ mask stored
+				in the BIOS $PIR table. This is needed on
+				some systems with broken BIOSes, notably
+				some HP Pavilion N5400 and Omnibook XE3
+				notebooks. This will have no effect if ACPI
+				IRQ routing is enabled.
+		noacpi		[IA-32] Do not use ACPI for IRQ routing
+				or for PCI scanning.
+		routeirq	Do IRQ routing for all PCI devices.
+				This is normally done in pci_enable_device(),
+				so this option is a temporary workaround
+				for broken drivers that don't call it.
+		firmware	[ARM] Do not re-enumerate the bus but instead
+				just use the configuration from the
+				bootloader. This is currently used on
+				IXP2000 systems where the bus has to be
+				configured a certain way for adjunct CPUs.
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
@@ -1127,19 +1143,20 @@
 			[ISAPNP] Exclude DMAs for the autoconfiguration
 
 	pnp_reserve_io=	[ISAPNP] Exclude I/O ports for the autoconfiguration
-		     	Ranges are in pairs (I/O port base and size).
+			Ranges are in pairs (I/O port base and size).
 
 	pnp_reserve_mem=
-			[ISAPNP] Exclude memory regions for the autoconfiguration
+			[ISAPNP] Exclude memory regions for the
+			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
 	profile=	[KNL] Enable kernel profiling via /proc/profile
-			{ schedule | <number> }
-			(param: schedule - profile schedule points}
-			(param: profile step/bucket size as a power of 2 for
-				statistical time based profiling)
+			Format: [schedule,]<number>
+			Param: "schedule" - profile schedule points.
+			Param: <number> - step/bucket size as a power of 2 for
+				statistical time based profiling.
 
-	processor.max_cstate=   [HW, ACPI]
+	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
 
@@ -1147,27 +1164,28 @@
 			before loading.
 			See Documentation/ramdisk.txt.
 
-	psmouse.proto=  [HW,MOUSE] Highest PS2 mouse protocol extension to
-			probe for (bare|imps|exps|lifebook|any).
+	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
+			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
 			per second.
-	psmouse.resetafter=
-			[HW,MOUSE] Try to reset the device after so many bad packets
+	psmouse.resetafter=	[HW,MOUSE]
+			Try to reset the device after so many bad packets
 			(0 = never).
 	psmouse.resolution=
 			[HW,MOUSE] Set desired mouse resolution, in dpi.
 	psmouse.smartscroll=
-			[HW,MOUSE] Controls Logitech smartscroll autorepeat,
+			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
 	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
-			Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
 
 	pt.		[PARIDE]
 			See Documentation/paride.txt.
 
 	quiet=		[KNL] Disable log messages
- 
+
 	r128=		[HW,DRM]
 
 	raid=		[HW,RAID]
@@ -1176,10 +1194,9 @@
 	ramdisk=	[RAM] Sizes of RAM disks in kilobytes [deprecated]
 			See Documentation/ramdisk.txt.
 
-	ramdisk_blocksize=
-			[RAM]
+	ramdisk_blocksize=	[RAM]
 			See Documentation/ramdisk.txt.
- 
+
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
@@ -1195,7 +1212,8 @@
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
-	resume=		[SWSUSP] Specify the partition device for software suspension
+	resume=		[SWSUSP]
+			Specify the partition device for software suspend
 
 	rhash_entries=	[KNL,NET]
 			Set number of hash buckets for route cache
@@ -1225,7 +1243,7 @@
 			Format: <io>,<irq>,<dma>,<dma2>
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
- 
+
 	sbpcd=		[HW,CD] Soundblaster CD adapter
 			Format: <io>,<type>
 			See a comment before function sbpcd_setup() in
@@ -1258,21 +1276,20 @@
 
 	serialnumber	[BUGS=IA-32]
 
-	sg_def_reserved_size=
-			[SCSI]
- 
+	sg_def_reserved_size=	[SCSI]
+
 	sgalaxy=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<sgbase>
 
 	shapers=	[NET]
 			Maximal number of shapers.
- 
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.
 
 	simeth=		[IA-64]
 	simscsi=
- 
+
 	sjcd=		[HW,CD]
 			Format: <io>,<irq>,<dma>
 			See header of drivers/cdrom/sjcd.c.
@@ -1403,10 +1420,10 @@
 	snd-wavefront=	[HW,ALSA]
 
 	snd-ymfpci=	[HW,ALSA]
- 
+
 	sonicvibes=	[HW,OSS]
 			Format: <reverb>
- 
+
 	sonycd535=	[HW,CD]
 			Format: <io>[,<irq>]
 
@@ -1423,7 +1440,7 @@
 
 	sscape=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
- 
+
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
@@ -1446,7 +1463,7 @@
 	stram_swap=	[HW,M68k]
 
 	swiotlb=	[IA-64] Number of I/O TLB slabs
- 
+
 	switches=	[HW,M68k]
 
 	sym53c416=	[HW,SCSI]
@@ -1479,14 +1496,16 @@
 	tp720=		[HW,PS2]
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
-			Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
- 
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
 	tsdev.xres=	[TS] Horizontal screen resolution.
 	tsdev.yres=	[TS] Vertical screen resolution.
 
-	turbografx.map[2|3]=
-			[HW,JOY] TurboGraFX parallel port interface
-			Format: <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
+	turbografx.map[2|3]=	[HW,JOY]
+			TurboGraFX parallel port interface
+			Format:
+			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
 			See also Documentation/input/joystick-parport.txt
 
 	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
@@ -1502,17 +1521,18 @@
 
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
- 
+
 	video=		[FB] Frame buffer configuration
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,IA-32] Select a particular video mode
-			See Documentation/i386/boot.txt and Documentation/svga.txt.
+			See Documentation/i386/boot.txt and
+			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
 			passed to the kernel using a special protocol.
 
-	vmalloc=nn[KMG]	[KNL,BOOT] forces the vmalloc area to have an exact
+	vmalloc=nn[KMG]	[KNL,BOOT] Forces the vmalloc area to have an exact
 			size of <nn>. This can be used to increase the
 			minimum size (128MB on x86). It can also be used to
 			decrease the size and leave more room for directly
@@ -1520,11 +1540,11 @@
 
 	vmhalt=		[KNL,S390]
 
-	vmpoff=		[KNL,S390] 
- 
+	vmpoff=		[KNL,S390]
+
 	waveartist=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
- 
+
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.
 
@@ -1538,21 +1558,25 @@
 	xd_geo=		See header of drivers/block/xd.c.
 
 	xirc2ps_cs=	[NET,PCMCIA]
-			Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
+			Format:
+			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
 
-
+______________________________________________________________________
 Changelog:
 
+2000-06-??	Mr. Unknown
 	The last known update (for 2.4.0) - the changelog was not kept before.
-	2000-06-??	Mr. Unknown
 
+2002-11-24	Petr Baudis <pasky@ucw.cz>
+		Randy Dunlap <randy.dunlap@verizon.net>
 	Update for 2.5.49, description for most of the options introduced,
 	references to other documentation (C files, READMEs, ..), added S390,
 	PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
 	reformatting.
-	2002-11-24	Petr Baudis <pasky@ucw.cz>
-			Randy Dunlap <randy.dunlap@verizon.net>
+
+2005-10-19	Randy Dunlap <rdunlap@xenotime.net>
+	Lots of typos, whitespace, some reformatting.
 
 TODO:
 

diff --git a/Makefile b/Makefile
index 504ba3c..4a7000e 100644
--- a/Makefile
+++ b/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 14
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*
@@ -372,7 +372,7 @@
 # Files to ignore in find ... statements
 
 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
-RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
 
 # ===========================================================================
 # Rules shared between *config targets and build targets
@@ -660,8 +660,10 @@
 # Link of vmlinux
 # If CONFIG_KALLSYMS is set .version is already updated
 # Generate System.map and verify that the content is consistent
-
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
 define rule_vmlinux__
+	:
 	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
 
 	$(call cmd,vmlinux__)

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index c3c2f17..a1b153d 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c

@@ -67,7 +67,7 @@
 	}
 	writel(0, impd1->base + IMPD1_LOCK);
 
-#if DEBUG
+#ifdef DEBUG
 	vco.v = val & 0x1ff;
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
@@ -427,17 +427,18 @@
 	return ret;
 }
 
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	struct list_head *l, *n;
 	int i;
 
-	list_for_each_safe(l, n, &dev->dev.children) {
-		struct device *d = list_to_dev(l);
-
-		device_unregister(d);
-	}
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
 		clk_unregister(&impd1->vcos[i]);

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index d327c12..1d767766 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c

@@ -250,6 +250,25 @@
 	i2c_device.dev.platform_data = info;
 }
 
+static struct resource i2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2s_device = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= i2c_resources,
+	.num_resources	= ARRAY_SIZE(i2s_resources),
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -258,6 +277,7 @@
 	&btuart_device,
 	&stuart_device,
 	&i2c_device,
+	&i2s_device,
 };
 
 static int __init pxa_init(void)

diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index f596082..8b3d5dc 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c

@@ -98,7 +98,10 @@
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	idno = (dev == NULL) ? -1 : to_platform_device(dev)->id;
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
 
 	down(&clocks_sem);
 

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8ca9559..7b51bfd 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c

@@ -307,9 +307,9 @@
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 40,
-	.twrph0		= 80,
-	.twrph1		= 80,
+	.tacls		= 30,
+	.twrph0		= 60,
+	.twrph1		= 60,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,

diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index caf3b19..9bb5fff 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S

@@ -55,7 +55,14 @@
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	mov	pc, lr
+	stmfd	sp!, {lr}
+	cpsid	if				@ disable interrupts
+	bl	v6_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
 
 /*
  *	cpu_v6_reset(loc)

diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index ab6e061..58ca98f 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.3"
+#define VERSION "version 1.50.4"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -111,8 +111,8 @@
 	u32 i = 0;
 
 	do {
-		if (i++ > 0x1000000) {
-			printk(KERN_ERR PFX "detected change pending stuck\n");
+		if (i++ > 10000) {
+			dprintk("detected change pending stuck\n");
 			return 1;
 		}
 		rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -159,6 +159,7 @@
 {
 	u32 lo;
 	u32 savevid = data->currvid;
+	u32 i = 0;
 
 	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
@@ -170,10 +171,13 @@
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
 
-	wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}			
+	} while (query_current_values_with_pending_wait(data));
 
 	count_off_irt(data);
 
@@ -197,6 +201,7 @@
 {
 	u32 lo;
 	u32 savefid = data->currfid;
+	int i = 0;
 
 	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
@@ -208,10 +213,13 @@
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
 
-	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+                if (i++ > 100) {
+                        printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+                        return 1;
+                }
+	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
 		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",

diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
index dbc0b3e..a604efc 100644
--- a/arch/ia64/lib/swiotlb.c
+++ b/arch/ia64/lib/swiotlb.c

@@ -123,8 +123,8 @@
 	/*
 	 * Get IO TLB memory from the low pages
 	 */
-	io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs *
-					       (1 << IO_TLB_SHIFT));
+	io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs *
+					     (1 << IO_TLB_SHIFT), 0x100000000);
 	if (!io_tlb_start)
 		panic("Cannot allocate SWIOTLB buffer");
 	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);

diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig
index 46c5da4..67ffecb 100644
--- a/arch/ppc64/configs/bpa_defconfig
+++ b/arch/ppc64/configs/bpa_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:12:19 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:29:10 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -36,6 +37,7 @@
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -95,6 +97,7 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT_NONE=y
@@ -110,17 +113,18 @@
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -132,8 +136,6 @@
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,8 +165,8 @@
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -181,6 +183,7 @@
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -188,11 +191,14 @@
 CONFIG_IP_NF_CONNTRACK=y
 # CONFIG_IP_NF_CT_ACCT is not set
 # CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=y
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -216,13 +222,16 @@
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -240,6 +249,7 @@
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
@@ -251,6 +261,12 @@
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -278,6 +294,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -292,6 +309,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -322,7 +344,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -395,6 +416,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -436,12 +458,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -462,15 +490,18 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 CONFIG_SKGE=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -552,6 +583,7 @@
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
@@ -642,7 +674,6 @@
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -656,7 +687,6 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -683,12 +713,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -756,10 +791,6 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,6 +799,7 @@
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -794,13 +826,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -846,6 +876,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -923,6 +954,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -981,7 +1013,12 @@
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
index fc83d93..6323065 100644
--- a/arch/ppc64/configs/g5_defconfig
+++ b/arch/ppc64/configs/g5_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:59 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:23 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -97,6 +99,7 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -109,19 +112,20 @@
 CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_HOTPLUG_CPU is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -132,8 +136,6 @@
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,8 +165,8 @@
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -175,6 +177,7 @@
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -182,11 +185,14 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -210,14 +216,18 @@
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -235,6 +245,7 @@
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -244,6 +255,11 @@
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -270,6 +286,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -284,6 +301,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -315,7 +337,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -395,6 +416,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -422,6 +444,7 @@
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -435,10 +458,12 @@
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -498,6 +523,7 @@
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -540,7 +566,6 @@
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
 
 #
@@ -558,12 +583,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -585,6 +616,7 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=m
@@ -594,6 +626,7 @@
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -760,8 +793,8 @@
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -775,7 +808,6 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -802,12 +834,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -856,6 +893,7 @@
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -937,6 +975,7 @@
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -956,9 +995,11 @@
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -983,30 +1024,14 @@
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
 CONFIG_USB_MON=y
 
 #
@@ -1124,16 +1149,12 @@
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1141,6 +1162,7 @@
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1168,14 +1190,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1225,6 +1244,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1303,6 +1323,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1360,7 +1381,12 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
index 013d4e0..62e92c7 100644
--- a/arch/ppc64/configs/iSeries_defconfig
+++ b/arch/ppc64/configs/iSeries_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:02 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:56 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +39,7 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -88,6 +90,7 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -101,17 +104,16 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -152,8 +154,8 @@
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -164,6 +166,7 @@
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -171,11 +174,14 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -199,14 +205,18 @@
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -224,6 +234,7 @@
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -233,6 +244,11 @@
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -259,6 +275,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -273,6 +290,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -303,7 +325,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -323,6 +344,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -350,6 +372,7 @@
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -363,6 +386,7 @@
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -415,6 +439,7 @@
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -445,12 +470,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -489,6 +520,7 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -498,6 +530,7 @@
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -632,7 +665,6 @@
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -643,12 +675,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -722,16 +759,12 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -739,6 +772,7 @@
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -766,14 +800,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -824,6 +855,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -897,6 +929,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -954,7 +987,12 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
index dd42892..7b480f3 100644
--- a/arch/ppc64/configs/maple_defconfig
+++ b/arch/ppc64/configs/maple_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:04 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:31:24 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -97,6 +99,7 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -109,17 +112,18 @@
 CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -131,8 +135,6 @@
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,14 +165,19 @@
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -196,6 +203,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -210,6 +218,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -240,7 +253,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -313,6 +325,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -354,12 +367,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -398,6 +417,7 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -408,6 +428,7 @@
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -553,7 +574,6 @@
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -567,7 +587,6 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -594,12 +613,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -681,9 +705,11 @@
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -814,10 +840,6 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -826,6 +848,7 @@
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -849,14 +872,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -898,6 +918,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -975,6 +996,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1034,6 +1056,7 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
index 29f7b80..9f09dff 100644
--- a/arch/ppc64/configs/pSeries_defconfig
+++ b/arch/ppc64/configs/pSeries_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:07 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:32:17 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +39,7 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -104,6 +106,7 @@
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_NUMA=y
@@ -124,19 +127,20 @@
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -152,8 +156,6 @@
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -183,8 +185,8 @@
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -195,6 +197,9 @@
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -202,11 +207,15 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -230,14 +239,18 @@
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -255,6 +268,7 @@
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -264,6 +278,11 @@
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -290,6 +309,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -304,6 +324,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -342,7 +367,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -416,6 +440,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -443,6 +468,7 @@
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -456,6 +482,7 @@
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -517,6 +544,7 @@
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -547,12 +575,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -581,6 +615,7 @@
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -594,6 +629,7 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -604,6 +640,7 @@
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
@@ -789,7 +826,6 @@
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -804,7 +840,6 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -831,12 +866,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -885,6 +925,7 @@
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -982,9 +1023,11 @@
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1057,7 +1100,8 @@
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -1095,16 +1139,12 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1112,6 +1152,7 @@
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1139,14 +1180,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1197,6 +1235,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1261,6 +1300,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1320,7 +1360,12 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig
index 7cb4750..37c157c 100644
--- a/arch/ppc64/defconfig
+++ b/arch/ppc64/defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:54 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:28:33 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -106,6 +108,7 @@
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 # CONFIG_NUMA is not set
@@ -126,19 +129,20 @@
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,8 +158,6 @@
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -185,8 +187,8 @@
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -197,6 +199,9 @@
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -204,11 +209,15 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -232,14 +241,18 @@
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -257,6 +270,7 @@
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -266,6 +280,11 @@
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -292,6 +311,7 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -306,6 +326,11 @@
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -344,7 +369,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -422,6 +446,7 @@
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -449,6 +474,7 @@
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -462,10 +488,12 @@
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -535,6 +563,7 @@
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -578,7 +607,6 @@
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
 
 #
@@ -596,12 +624,18 @@
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -630,6 +664,7 @@
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -643,16 +678,19 @@
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
@@ -838,8 +876,8 @@
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -854,7 +892,6 @@
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -881,12 +918,17 @@
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -939,6 +981,7 @@
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -1020,6 +1063,7 @@
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1036,9 +1080,11 @@
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1111,7 +1157,8 @@
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -1149,16 +1196,12 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1166,6 +1209,7 @@
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1192,14 +1236,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1250,6 +1291,7 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1328,6 +1370,7 @@
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1387,7 +1430,12 @@
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

diff --git a/arch/ppc64/kernel/iSeries_htab.c b/arch/ppc64/kernel/iSeries_htab.c
index 2192055..073b766 100644
--- a/arch/ppc64/kernel/iSeries_htab.c
+++ b/arch/ppc64/kernel/iSeries_htab.c

@@ -66,7 +66,7 @@
 	}
 
 	if (slot < 0) {		/* MSB set means secondary group */
-		vflags |= HPTE_V_VALID;
+		vflags |= HPTE_V_SECONDARY;
 		secondary = 1;
 		slot &= 0x7fffffffffffffff;
 	}

diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c
index 9939c20..b56c6a3 100644
--- a/arch/ppc64/kernel/time.c
+++ b/arch/ppc64/kernel/time.c

@@ -870,7 +870,7 @@
 	rb = ((ra + b) - (x * divisor)) << 32;
 
 	y = (rb + c)/divisor;
-	rc = ((rb + b) - (y * divisor)) << 32;
+	rc = ((rb + c) - (y * divisor)) << 32;
 
 	z = (rc + d)/divisor;
 

diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S
index 07f1c1c..e243c1d 100644
--- a/arch/ppc64/kernel/vdso32/gettimeofday.S
+++ b/arch/ppc64/kernel/vdso32/gettimeofday.S

@@ -109,7 +109,7 @@
 	lwz	r6,(CFG_TB_TO_XS+4)(r9)
 	mulhwu	r4,r7,r5
 	mulhwu	r6,r7,r6
-	mullw	r6,r7,r5
+	mullw	r0,r7,r5
 	addc	r6,r6,r0
 
 	/* At this point, we have the scaled xsec value in r4 + XER:CA

diff --git a/arch/ppc64/mm/init.c b/arch/ppc64/mm/init.c
index c2157c9..be64b15 100644
--- a/arch/ppc64/mm/init.c
+++ b/arch/ppc64/mm/init.c

@@ -799,8 +799,7 @@
 	if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
 		local = 1;
 
-	__hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
-		    0x300, local);
+	__hash_page(ea, 0, vsid, ptep, 0x300, local);
 	local_irq_restore(flags);
 }
 

diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 8f06567..8d353f0 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h

@@ -183,10 +183,6 @@
                 case RBP: val = UPT_RBP(regs); break; \
                 case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
                 case CS: val = UPT_CS(regs); break; \
-                case DS: val = UPT_DS(regs); break; \
-                case ES: val = UPT_ES(regs); break; \
-                case FS: val = UPT_FS(regs); break; \
-                case GS: val = UPT_GS(regs); break; \
                 case EFLAGS: val = UPT_EFLAGS(regs); break; \
                 default :  \
                         panic("Bad register in UPT_REG : %d\n", reg);  \

diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index bfa8b76..2dbb1b0 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c

@@ -58,9 +58,8 @@
 			return_VALUE(-EAGAIN);
 
 		result = acpi_bus_receive_event(&event);
-		if (result) {
-			return_VALUE(-EIO);
-		}
+		if (result)
+			return_VALUE(result);
 
 		chars_remaining = sprintf(str, "%s %s %08x %08x\n",
 					  event.device_class ? event.

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index e36c5da..3937adf 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c

@@ -96,7 +96,7 @@
 static acpi_status
 do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 {
-	int *busnr = (int *)data;
+	unsigned long *busnr = (unsigned long *)data;
 	struct acpi_resource_address64 address;
 
 	if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
@@ -115,13 +115,13 @@
 static int get_root_bridge_busnr(acpi_handle handle)
 {
 	acpi_status status;
-	int bus, bbn;
+	unsigned long bus, bbn;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 
 	status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL,
-				       (unsigned long *)&bbn);
+				       &bbn);
 	if (status == AE_NOT_FOUND) {
 		/* Assume bus = 0 */
 		printk(KERN_INFO PREFIX
@@ -153,7 +153,7 @@
 	}
       exit:
 	acpi_os_free(buffer.pointer);
-	return bbn;
+	return (int)bbn;
 }
 
 static acpi_status

diff --git a/drivers/char/.gitignore b/drivers/char/.gitignore
new file mode 100644
index 0000000..2b6b1d7
--- /dev/null
+++ b/drivers/char/.gitignore

@@ -0,0 +1,3 @@
+consolemap_deftbl.c
+defkeymap.c
+

diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index ced4215..39ea96e 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c

@@ -148,7 +148,8 @@
 
 	offset	 = address - vma->vm_start;
 	i = (unsigned long)map->handle + offset;
-	page = vmalloc_to_page((void *)i);
+	page = (map->type == _DRM_CONSISTENT) ?
+		virt_to_page((void *)i) : vmalloc_to_page((void *)i);
 	if (!page)
 		return NOPAGE_OOM;
 	get_page(page);

diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c
index fc7d4a5..c8e1b6c 100644
--- a/drivers/char/drm/mga_dma.c
+++ b/drivers/char/drm/mga_dma.c

@@ -437,7 +437,7 @@
 				    drm_mga_dma_bootstrap_t * dma_bs)
 {
 	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
-	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	unsigned int warp_size = mga_warp_microcode_size(dev_priv);
 	int err;
 	unsigned  offset;
 	const unsigned secondary_size = dma_bs->secondary_bin_count
@@ -499,6 +499,12 @@
 		return err;
 	}
 
+	/* Make drm_addbufs happy by not trying to create a mapping for less
+	 * than a page.
+	 */
+	if (warp_size < PAGE_SIZE)
+		warp_size = PAGE_SIZE;
+
 	offset = 0;
 	err = drm_addmap( dev, offset, warp_size,
 			  _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp );
@@ -587,7 +593,7 @@
 				    drm_mga_dma_bootstrap_t * dma_bs)
 {
 	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
-	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	unsigned int warp_size = mga_warp_microcode_size(dev_priv);
 	unsigned int primary_size;
 	unsigned int bin_count;
 	int err;
@@ -599,6 +605,12 @@
 		return DRM_ERR(EFAULT);
 	}
 
+	/* Make drm_addbufs happy by not trying to create a mapping for less
+	 * than a page.
+	 */
+	if (warp_size < PAGE_SIZE)
+		warp_size = PAGE_SIZE;
+
 	/* The proper alignment is 0x100 for this mapping */
 	err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT,
 			 _DRM_READ_ONLY, &dev_priv->warp);
@@ -812,6 +824,10 @@
 	}
 
 	if (! dev_priv->used_new_dma_init) {
+
+		dev_priv->dma_access = MGA_PAGPXFER;
+		dev_priv->wagp_enable = MGA_WAGP_ENABLE;
+
 		dev_priv->status = drm_core_findmap(dev, init->status_offset);
 		if (!dev_priv->status) {
 			DRM_ERROR("failed to find status page!\n");
@@ -928,7 +944,7 @@
 		drm_mga_private_t *dev_priv = dev->dev_private;
 
 		if ((dev_priv->warp != NULL) 
-		    && (dev_priv->mmio->type != _DRM_CONSISTENT))
+		    && (dev_priv->warp->type != _DRM_CONSISTENT))
 			drm_core_ioremapfree(dev_priv->warp, dev);
 
 		if ((dev_priv->primary != NULL) 

diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h
index b22fdbd..6059c5a 100644
--- a/drivers/char/drm/mga_drv.h
+++ b/drivers/char/drm/mga_drv.h

@@ -227,7 +227,7 @@
 #define MGA_EMIT_STATE( dev_priv, dirty )				\
 do {									\
 	if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) {			\
-		if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {	\
+		if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) {	\
 			mga_g400_emit_state( dev_priv );		\
 		} else {						\
 			mga_g200_emit_state( dev_priv );		\

diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c
index 05bbb47..6ac5e00 100644
--- a/drivers/char/drm/mga_state.c
+++ b/drivers/char/drm/mga_state.c

@@ -53,7 +53,7 @@
 
 	/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
 	 */
-	if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+	if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
 		DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
 			  MGA_LEN + MGA_EXEC, 0x80000000,
 			  MGA_DWGCTL, ctx->dwgctl,

diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 97d6dc2..853c98c 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c

@@ -695,7 +695,7 @@
             {
                TRACE_PE("IDLE - got STX but no space in rx_queue!");
                pInfo->state=R3964_WAIT_FOR_RX_BUF;
-	       mod_timer(&pInfo->tmr, R3964_TO_NO_BUF);
+	       mod_timer(&pInfo->tmr, jiffies + R3964_TO_NO_BUF);
                break;
             }
 start_receiving:
@@ -705,7 +705,7 @@
             pInfo->last_rx = 0;
             pInfo->flags &= ~R3964_ERROR;
             pInfo->state=R3964_RECEIVING;
-	    mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+	    mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
 	    pInfo->nRetry = 0;
             put_char(pInfo, DLE);
             flush(pInfo);
@@ -732,7 +732,7 @@
                if(pInfo->flags & R3964_BCC)
                {
                   pInfo->state = R3964_WAIT_FOR_BCC;
-		  mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+		  mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
                }
                else 
                {
@@ -744,7 +744,7 @@
                pInfo->last_rx = c;
 char_to_buf:
                pInfo->rx_buf[pInfo->rx_position++] = c;
-	       mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+	       mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
             }
          }
         /* else: overflow-msg? BUF_SIZE>MTU; should not happen? */ 

diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 6a6acbd..4cf9b8f 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c

@@ -2283,8 +2283,9 @@
 {
 	struct ohci1394_iso_tasklet *t;
 	unsigned long mask;
+	unsigned long flags;
 
-	spin_lock(&ohci->iso_tasklet_list_lock);
+	spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
 
 	list_for_each_entry(t, &ohci->iso_tasklet_list, link) {
 		mask = 1 << t->context;
@@ -2295,8 +2296,7 @@
 			tasklet_schedule(&t->tasklet);
 	}
 
-	spin_unlock(&ohci->iso_tasklet_list_lock);
-
+	spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
 }
 
 static irqreturn_t ohci_irq_handler(int irq, void *dev_id,

diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 315f5ca..0470f77 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c

@@ -412,6 +412,7 @@
 static ssize_t raw1394_read(struct file *file, char __user * buffer,
 			    size_t count, loff_t * offset_is_ignored)
 {
+	unsigned long flags;
 	struct file_info *fi = (struct file_info *)file->private_data;
 	struct list_head *lh;
 	struct pending_request *req;
@@ -435,10 +436,10 @@
 		}
 	}
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	lh = fi->req_complete.next;
 	list_del(lh);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	req = list_entry(lh, struct pending_request, list);
 
@@ -486,6 +487,7 @@
 
 static int state_initialized(struct file_info *fi, struct pending_request *req)
 {
+	unsigned long flags;
 	struct host_info *hi;
 	struct raw1394_khost_list *khl;
 
@@ -499,7 +501,7 @@
 
 	switch (req->req.type) {
 	case RAW1394_REQ_LIST_CARDS:
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		khl = kmalloc(sizeof(struct raw1394_khost_list) * host_count,
 			      SLAB_ATOMIC);
 
@@ -513,7 +515,7 @@
 				khl++;
 			}
 		}
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		if (khl != NULL) {
 			req->req.error = RAW1394_ERROR_NONE;
@@ -528,7 +530,7 @@
 		break;
 
 	case RAW1394_REQ_SET_CARD:
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		if (req->req.misc < host_count) {
 			list_for_each_entry(hi, &host_info_list, list) {
 				if (!req->req.misc--)
@@ -550,7 +552,7 @@
 		} else {
 			req->req.error = RAW1394_ERROR_INVALID_ARG;
 		}
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		req->req.length = 0;
 		break;
@@ -569,7 +571,6 @@
 {
 	int channel = req->req.misc;
 
-	spin_lock_irq(&host_info_lock);
 	if ((channel > 63) || (channel < -64)) {
 		req->req.error = RAW1394_ERROR_INVALID_ARG;
 	} else if (channel >= 0) {
@@ -601,7 +602,6 @@
 
 	req->req.length = 0;
 	queue_complete_req(req);
-	spin_unlock_irq(&host_info_lock);
 }
 
 static void handle_fcp_listen(struct file_info *fi, struct pending_request *req)
@@ -627,6 +627,7 @@
 static int handle_async_request(struct file_info *fi,
 				struct pending_request *req, int node)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet = NULL;
 	u64 addr = req->req.address & 0xffffffffffffULL;
 
@@ -761,9 +762,9 @@
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	packet->generation = req->req.generation;
 
@@ -779,6 +780,7 @@
 static int handle_iso_send(struct file_info *fi, struct pending_request *req,
 			   int channel)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet;
 
 	packet = hpsb_make_isopacket(fi->host, req->req.length, channel & 0x3f,
@@ -804,9 +806,9 @@
 				      (void (*)(void *))queue_complete_req,
 				      req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	/* Update the generation of the packet just before sending. */
 	packet->generation = req->req.generation;
@@ -821,6 +823,7 @@
 
 static int handle_async_send(struct file_info *fi, struct pending_request *req)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet;
 	int header_length = req->req.misc & 0xffff;
 	int expect_response = req->req.misc >> 16;
@@ -867,9 +870,9 @@
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	/* Update the generation of the packet just before sending. */
 	packet->generation = req->req.generation;
@@ -885,6 +888,7 @@
 static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 		    u64 addr, size_t length, u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -899,7 +903,7 @@
 	       "addr: %4.4x %8.8x length: %Zu", nodeid,
 	       (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF),
 	       length);
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -924,7 +928,7 @@
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_read FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_read addr_entry FOUND");
@@ -954,7 +958,7 @@
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_read -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -974,7 +978,7 @@
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_read -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1031,13 +1035,14 @@
 			    sizeof(struct arm_request));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
 static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 		     quadlet_t * data, u64 addr, size_t length, u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1052,7 +1057,7 @@
 	       "addr: %4.4x %8.8x length: %Zu", nodeid,
 	       (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF),
 	       length);
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1077,7 +1082,7 @@
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_write FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_write addr_entry FOUND");
@@ -1106,7 +1111,7 @@
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_write -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request my be retried */
 		}
@@ -1118,7 +1123,7 @@
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_write -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1165,7 +1170,7 @@
 			    sizeof(struct arm_request));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1173,6 +1178,7 @@
 		    u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
 		    u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1198,7 +1204,7 @@
 		       (u32) (addr & 0xFFFFFFFF), ext_tcode & 0xFF,
 		       be32_to_cpu(data), be32_to_cpu(arg));
 	}
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1224,7 +1230,7 @@
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_lock FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_lock addr_entry FOUND");
@@ -1307,7 +1313,7 @@
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_lock -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1316,7 +1322,7 @@
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_lock -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1382,7 +1388,7 @@
 			    sizeof(struct arm_response) + 2 * sizeof(*store));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1390,6 +1396,7 @@
 		      u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
 		      u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1422,7 +1429,7 @@
 		       (u32) ((be64_to_cpu(arg) >> 32) & 0xFFFFFFFF),
 		       (u32) (be64_to_cpu(arg) & 0xFFFFFFFF));
 	}
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search addressentry in file_info's for host */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1449,7 +1456,7 @@
 		printk(KERN_ERR
 		       "raw1394: arm_lock64 FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_lock64 addr_entry FOUND");
@@ -1533,7 +1540,7 @@
 		DBGMSG("arm_lock64 -> entering notification-section");
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			DBGMSG("arm_lock64 -> rcode_conflict_error");
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
@@ -1542,7 +1549,7 @@
 		req->data = kmalloc(size, SLAB_ATOMIC);
 		if (!(req->data)) {
 			free_pending_request(req);
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			DBGMSG("arm_lock64 -> rcode_conflict_error");
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
@@ -1609,7 +1616,7 @@
 			    sizeof(struct arm_response) + 2 * sizeof(*store));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1980,6 +1987,7 @@
 	struct hpsb_packet *packet = NULL;
 	int retval = 0;
 	quadlet_t data;
+	unsigned long flags;
 
 	data = be32_to_cpu((u32) req->req.sendb);
 	DBGMSG("write_phypacket called - quadlet 0x%8.8x ", data);
@@ -1990,9 +1998,9 @@
 	req->packet = packet;
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 	packet->generation = req->req.generation;
 	retval = hpsb_send_packet(packet);
 	DBGMSG("write_phypacket send_packet called => retval: %d ", retval);
@@ -2659,14 +2667,15 @@
 {
 	struct file_info *fi = file->private_data;
 	unsigned int mask = POLLOUT | POLLWRNORM;
+	unsigned long flags;
 
 	poll_wait(file, &fi->poll_wait_complete, pt);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	if (!list_empty(&fi->req_complete)) {
 		mask |= POLLIN | POLLRDNORM;
 	}
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	return mask;
 }
@@ -2710,6 +2719,7 @@
 	struct arm_addr *arm_addr = NULL;
 	int another_host;
 	int csr_mod = 0;
+	unsigned long flags;
 
 	if (fi->iso_state != RAW1394_ISO_INACTIVE)
 		raw1394_iso_shutdown(fi);
@@ -2720,13 +2730,11 @@
 		}
 	}
 
-	spin_lock_irq(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, flags);
 	fi->listen_channels = 0;
-	spin_unlock_irq(&host_info_lock);
 
 	fail = 0;
 	/* set address-entries invalid */
-	spin_lock_irq(&host_info_lock);
 
 	while (!list_empty(&fi->addr_list)) {
 		another_host = 0;
@@ -2777,14 +2785,14 @@
 		vfree(addr->addr_space_buffer);
 		kfree(addr);
 	}			/* while */
-	spin_unlock_irq(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, flags);
 	if (fail > 0) {
 		printk(KERN_ERR "raw1394: during addr_list-release "
 		       "error(s) occurred \n");
 	}
 
 	while (!done) {
-		spin_lock_irq(&fi->reqlists_lock);
+		spin_lock_irqsave(&fi->reqlists_lock, flags);
 
 		while (!list_empty(&fi->req_complete)) {
 			lh = fi->req_complete.next;
@@ -2798,7 +2806,7 @@
 		if (list_empty(&fi->req_pending))
 			done = 1;
 
-		spin_unlock_irq(&fi->reqlists_lock);
+		spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 		if (!done)
 			down_interruptible(&fi->complete_sem);
@@ -2828,9 +2836,9 @@
 		     fi->host->id);
 
 	if (fi->state == connected) {
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		list_del(&fi->list);
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		put_device(&fi->host->device);
 	}

diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index c81fa8e..8dfafda 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c

@@ -396,20 +396,21 @@
 		writel(dev->eq_table.clr_mask, dev->eq_table.clr_int);
 
 	ecr = readl(dev->eq_regs.tavor.ecr_base + 4);
-	if (ecr) {
-		writel(ecr, dev->eq_regs.tavor.ecr_base +
-		       MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
+	if (!ecr)
+		return IRQ_NONE;
 
-		for (i = 0; i < MTHCA_NUM_EQ; ++i)
-			if (ecr & dev->eq_table.eq[i].eqn_mask &&
-			    mthca_eq_int(dev, &dev->eq_table.eq[i])) {
+	writel(ecr, dev->eq_regs.tavor.ecr_base +
+	       MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4);
+
+	for (i = 0; i < MTHCA_NUM_EQ; ++i)
+		if (ecr & dev->eq_table.eq[i].eqn_mask) {
+			if (mthca_eq_int(dev, &dev->eq_table.eq[i]))
 				tavor_set_eq_ci(dev, &dev->eq_table.eq[i],
 						dev->eq_table.eq[i].cons_index);
-				tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
-			}
-	}
+			tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn);
+		}
 
-	return IRQ_RETVAL(ecr);
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr,

diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index d5c5b32..4015a91 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c

@@ -90,11 +90,11 @@
 
 static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request)
 {
-	complete(&request->done);
-
 	/* Mark slot as available */
 	udev->requests[request->id] = NULL;
 	wake_up_interruptible(&udev->requests_waitq);
+
+	complete(&request->done);
 }
 
 static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 2897df9..e947607 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c

@@ -3063,6 +3063,7 @@
 	 * many dirty RAID5 blocks.
 	 */
 
+	allow_signal(SIGKILL);
 	complete(thread->event);
 	while (!kthread_should_stop()) {
 		void (*run)(mddev_t *);
@@ -3111,7 +3112,7 @@
 	thread->mddev = mddev;
 	thread->name = name;
 	thread->timeout = MAX_SCHEDULE_TIMEOUT;
-	thread->tsk = kthread_run(md_thread, thread, mdname(thread->mddev));
+	thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev));
 	if (IS_ERR(thread->tsk)) {
 		kfree(thread);
 		return NULL;
@@ -3569,6 +3570,7 @@
 	try_again:
 		if (signal_pending(current)) {
 			flush_signals(current);
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			goto skip;
 		}
 		ITERATE_MDDEV(mddev2,tmp) {

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9357035..bbb989d 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig

@@ -262,7 +262,6 @@
 	depends on VIDEO_SAA7134 && DVB_CORE
 	select VIDEO_BUF_DVB
 	select DVB_MT352
-	select DVB_CX22702
 	select DVB_TDA1004X
 	---help---
 	  This adds support for DVB cards based on the

diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 4437bde..137b58f 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c

@@ -203,7 +203,7 @@
 	0x8c, 640,		/* Horizontal length */
 	0x8d, 640,		/* Number of pixels */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x173,		/* 13.5 MHz transport, Forced
+	0xf0, 0x73,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x13,		/* NTSC M, composite input */
 	0xe7, 0x1e1,		/* Enable vertical standard
@@ -212,38 +212,36 @@
 
 static const unsigned short init_pal[] = {
 	0x88, 23,		/* Window 1 vertical begin */
-	0x89, 288 + 16,		/* Vertical lines in (16 lines
+	0x89, 288,		/* Vertical lines in (16 lines
 				 * skipped by the VFE) */
-	0x8a, 288 + 16,		/* Vertical lines out (16 lines
+	0x8a, 288,		/* Vertical lines out (16 lines
 				 * skipped by the VFE) */
 	0x8b, 16,		/* Horizontal begin */
 	0x8c, 768,		/* Horizontal length */
 	0x8d, 784, 		/* Number of pixels
 				 * Must be >= Horizontal begin + Horizontal length */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x177,		/* 13.5 MHz transport, Forced
+	0xf0, 0x77,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x3d1,		/* PAL B,G,H,I, composite input */
-	0xe7, 0x261,		/* PAL/SECAM set to 288 + 16 lines 
-				 * change to 0x241 for 288 lines */
+	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
 };
 
 static const unsigned short init_secam[] = {
-	0x88, 23  - 16,		/* Window 1 vertical begin */
-	0x89, 288 + 16,		/* Vertical lines in (16 lines
+	0x88, 23,		/* Window 1 vertical begin */
+	0x89, 288,		/* Vertical lines in (16 lines
 				 * skipped by the VFE) */
-	0x8a, 288 + 16,		/* Vertical lines out (16 lines
+	0x8a, 288,		/* Vertical lines out (16 lines
 				 * skipped by the VFE) */
 	0x8b, 16,		/* Horizontal begin */
 	0x8c, 768,		/* Horizontal length */
 	0x8d, 784,		/* Number of pixels
 				 * Must be >= Horizontal begin + Horizontal length */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x177,		/* 13.5 MHz transport, Forced
+	0xf0, 0x77,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x3d5,		/* SECAM, composite input */
-	0xe7, 0x261,		/* PAL/SECAM set to 288 + 16 lines 
-				 * change to 0x241 for 288 lines */
+	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
 };
 
 static const unsigned char init_common[] = {
@@ -410,6 +408,12 @@
 	case DECODER_SET_NORM:
 	{
 		int *iarg = arg, data;
+		int temp_input;
+
+		/* Here we back up the input selection because it gets
+		   overwritten when we fill the registers with the
+                   choosen video norm */
+		temp_input = vpx3220_fp_read(client, 0xf2);
 
 		dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n",
 			I2C_NAME(client), *iarg);
@@ -449,6 +453,10 @@
 
 		}
 		decoder->norm = *iarg;
+
+		/* And here we set the backed up video input again */
+		vpx3220_fp_write(client, 0xf2, temp_input | 0x0010);
+		udelay(10);
 	}
 		break;
 

diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index cf3daaa..15ceaf6 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c

@@ -578,8 +578,9 @@
 				txfid, NULL);
 	if (err) {
 		netif_start_queue(dev);
-		printk(KERN_ERR "%s: Error %d transmitting packet\n",
-		       dev->name, err);
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: Error %d transmitting packet\n",
+				dev->name, err);
 		stats->tx_errors++;
 		goto fail;
 	}

diff --git a/drivers/pci/.gitignore b/drivers/pci/.gitignore
new file mode 100644
index 0000000..f297ca8
--- /dev/null
+++ b/drivers/pci/.gitignore

@@ -0,0 +1,4 @@
+classlist.h
+devlist.h
+gen-devlist
+

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 11ca4438..a6a630a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c

@@ -1233,7 +1233,7 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic );
 #endif
 
-#ifdef CONFIG_SCSI_SATA
+#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED
 static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
 {
 	u8 prog, comb, tmp;
@@ -1310,7 +1310,7 @@
 		request_region(0x170, 8, "libata");	/* port 1 */
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,	  quirk_intel_ide_combined );
-#endif /* CONFIG_SCSI_SATA */
+#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */
 
 
 int pcie_mch_quirk;

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 657be94..28ce3a7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c

@@ -40,7 +40,7 @@
  * FIXME: IO should be max 256 bytes.  However, since we may
  * have a P2P bridge below a cardbus bridge, we need 4K.
  */
-#define CARDBUS_IO_SIZE		(4*1024)
+#define CARDBUS_IO_SIZE		(256)
 #define CARDBUS_MEM_SIZE	(32*1024*1024)
 
 static void __devinit

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 20019b8..3ee9b8b 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig

@@ -553,6 +553,11 @@
 
 	  If unsure, say N.
 
+config SCSI_SATA_INTEL_COMBINED
+	bool
+	depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
+	default y
+
 config SCSI_BUSLOGIC
 	tristate "BusLogic SCSI support"
 	depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API

diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index c2786fc..5d8660a 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c

@@ -276,6 +276,8 @@
 	{	"SUP1620",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
 	{	"SUP1760",		0	},
+	/* SupraExpress 56i Sp Intl */
+	{	"SUP2171",		0	},
 	/* Phoebe Micro */
 	/* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
 	{	"TEX0011",		0	},

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 41bbae8..e142056 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c

@@ -326,7 +326,8 @@
 					usb_settoggle(udev, ep->epnum,
 						      ep->nextpid ==
 						      USB_PID_OUT,
-						      PTD_GET_TOGGLE(ptd) ^ 1);
+						      PTD_GET_TOGGLE(ptd));
+				urb->actual_length += PTD_GET_COUNT(ptd);
 				urb->status = cc_to_error[TD_DATAUNDERRUN];
 				spin_unlock(&urb->lock);
 				continue;

diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index a99865c..41f92b9 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c

@@ -1702,10 +1702,7 @@
 		if ((endpoint->bmAttributes & 3) != 3)		/* Not an interrupt endpoint */
 			continue;
 
-		/* handle potential highspeed HID correctly */
 		interval = endpoint->bInterval;
-		if (dev->speed == USB_SPEED_HIGH)
-			interval = 1 << (interval - 1);
 
 		/* Change the polling interval of mice. */
 		if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)

diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 6ef6f77..809fee2 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c

@@ -565,7 +565,11 @@
 		scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf,
 			    c->vc_screenbuf_size > vga_vram_size ?
 				vga_vram_size : c->vc_screenbuf_size);
-		vgacon_doresize(c, c->vc_cols, c->vc_rows);
+		if (!(vga_video_num_columns % 2) &&
+		    vga_video_num_columns <= ORIG_VIDEO_COLS &&
+		    vga_video_num_lines <= (ORIG_VIDEO_LINES *
+			vga_default_font_height) / c->vc_font.height)
+			vgacon_doresize(c, c->vc_cols, c->vc_rows);
 	}
 
 	return 0;		/* Redrawing not needed */
@@ -1023,7 +1027,8 @@
 	if (width % 2 || width > ORIG_VIDEO_COLS ||
 	    height > (ORIG_VIDEO_LINES * vga_default_font_height)/
 	    c->vc_font.height)
-		return -EINVAL;
+		/* let svgatextmode tinker with video timings */
+		return 0;
 
 	if (CON_IS_VISIBLE(c) && !vga_is_gfx) /* who knows */
 		vgacon_doresize(c, width, height);

diff --git a/drivers/video/logo/.gitignore b/drivers/video/logo/.gitignore
new file mode 100644
index 0000000..e48355f
--- /dev/null
+++ b/drivers/video/logo/.gitignore

@@ -0,0 +1,7 @@
+#
+# Generated files
+#
+*_mono.c
+*_vga16.c
+*_clut224.c
+*_gray256.c

diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 1ca80264..b1243da 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c

@@ -96,14 +96,14 @@
 		int loop = 10000;
 		u8 seq = 0, crtc17 = 0;
 
-		err = 0;
-
-		if (blank) {
+		if (blank == FB_BLANK_POWERDOWN) {
 			seq = 0x20;
 			crtc17 = 0x00;
+			err = 0;
 		} else {
 			seq = 0x00;
 			crtc17 = 0x80;
+			err = (blank == FB_BLANK_UNBLANK) ? 0 : -EINVAL;
 		}
 
 		vga_wseq(NULL, 0x00, 0x01);

diff --git a/fs/aio.c b/fs/aio.c
index d6b1551..edfca5b 100644
--- a/fs/aio.c
+++ b/fs/aio.c

@@ -398,7 +398,7 @@
 	if (unlikely(!req))
 		return NULL;
 
-	req->ki_flags = 1 << KIF_LOCKED;
+	req->ki_flags = 0;
 	req->ki_users = 2;
 	req->ki_key = 0;
 	req->ki_ctx = ctx;
@@ -547,25 +547,6 @@
 	return ioctx;
 }
 
-static int lock_kiocb_action(void *param)
-{
-	schedule();
-	return 0;
-}
-
-static inline void lock_kiocb(struct kiocb *iocb)
-{
-	wait_on_bit_lock(&iocb->ki_flags, KIF_LOCKED, lock_kiocb_action,
-			 TASK_UNINTERRUPTIBLE);
-}
-
-static inline void unlock_kiocb(struct kiocb *iocb)
-{
-	kiocbClearLocked(iocb);
-	smp_mb__after_clear_bit();
-	wake_up_bit(&iocb->ki_flags, KIF_LOCKED);
-}
-
 /*
  * use_mm
  *	Makes the calling kernel thread take on the specified
@@ -796,9 +777,7 @@
 		 * Hold an extra reference while retrying i/o.
 		 */
 		iocb->ki_users++;       /* grab extra reference */
-		lock_kiocb(iocb);
 		aio_run_iocb(iocb);
-		unlock_kiocb(iocb);
 		if (__aio_put_req(ctx, iocb))  /* drop extra ref */
 			put_ioctx(ctx);
  	}
@@ -1418,6 +1397,9 @@
 		if (unlikely(!access_ok(VERIFY_WRITE, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
+		ret = security_file_permission(file, MAY_READ);
+		if (unlikely(ret))
+			break;
 		ret = -EINVAL;
 		if (file->f_op->aio_read)
 			kiocb->ki_retry = aio_pread;
@@ -1430,6 +1412,9 @@
 		if (unlikely(!access_ok(VERIFY_READ, kiocb->ki_buf,
 			kiocb->ki_left)))
 			break;
+		ret = security_file_permission(file, MAY_WRITE);
+		if (unlikely(ret))
+			break;
 		ret = -EINVAL;
 		if (file->f_op->aio_write)
 			kiocb->ki_retry = aio_pwrite;
@@ -1542,7 +1527,6 @@
 
 	spin_lock_irq(&ctx->ctx_lock);
 	aio_run_iocb(req);
-	unlock_kiocb(req);
 	if (!list_empty(&ctx->run_list)) {
 		/* drain the run list */
 		while (__aio_run_iocbs(ctx))
@@ -1674,7 +1658,6 @@
 	if (NULL != cancel) {
 		struct io_event tmp;
 		pr_debug("calling cancel\n");
-		lock_kiocb(kiocb);
 		memset(&tmp, 0, sizeof(tmp));
 		tmp.obj = (u64)(unsigned long)kiocb->ki_obj.user;
 		tmp.data = kiocb->ki_user_data;
@@ -1686,7 +1669,6 @@
 			if (copy_to_user(result, &tmp, sizeof(tmp)))
 				ret = -EFAULT;
 		}
-		unlock_kiocb(kiocb);
 	} else
 		ret = -EINVAL;
 

diff --git a/fs/inotify.c b/fs/inotify.c
index a37e9fb..9fbaebf 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c

@@ -176,6 +176,7 @@
 	if (atomic_dec_and_test(&dev->count)) {
 		atomic_dec(&dev->user->inotify_devs);
 		free_uid(dev->user);
+		idr_destroy(&dev->idr);
 		kfree(dev);
 	}
 }

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index d7f7eb6..4a36839 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c

@@ -85,6 +85,10 @@
 	struct nfs_delegation *delegation;
 	int status = 0;
 
+	/* Ensure we first revalidate the attributes and page cache! */
+	if ((nfsi->cache_validity & (NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_ATTR)))
+		__nfs_revalidate_inode(NFS_SERVER(inode), inode);
+
 	delegation = nfs_alloc_delegation();
 	if (delegation == NULL)
 		return -ENOMEM;

diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index f6b9eda..6bdcfa9 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c

@@ -137,7 +137,8 @@
 	struct nfs_inode *nfsi = NFS_I(inode);
 	int retval = 0;
 
-	if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode))
+	if ((nfsi->cache_validity & (NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_ATTR))
+			|| nfs_attribute_timeout(inode))
 		retval = __nfs_revalidate_inode(NFS_SERVER(inode), inode);
 	nfs_revalidate_mapping(inode, filp->f_mapping);
 	return 0;

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 6922469d..d4eadee 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c

@@ -877,12 +877,10 @@
 	sigset_t oldmask;
 	int error;
 
-	atomic_inc(&inode->i_count);
 	rpc_clnt_sigmask(clnt, &oldmask);
 	error = wait_on_bit_lock(&nfsi->flags, NFS_INO_REVALIDATING,
 					nfs_wait_schedule, TASK_INTERRUPTIBLE);
 	rpc_clnt_sigunmask(clnt, &oldmask);
-	iput(inode);
 
 	return error;
 }
@@ -1226,10 +1224,6 @@
 	loff_t cur_size, new_isize;
 	int data_unstable;
 
-	/* Do we hold a delegation? */
-	if (nfs_have_delegation(inode, FMODE_READ))
-		return 0;
-
 	spin_lock(&inode->i_lock);
 
 	/* Are we in the process of updating data on the server? */
@@ -1350,7 +1344,8 @@
 	nfsi->read_cache_jiffies = fattr->timestamp;
 
 	/* Are we racing with known updates of the metadata on the server? */
-	data_unstable = ! nfs_verify_change_attribute(inode, verifier);
+	data_unstable = ! (nfs_verify_change_attribute(inode, verifier) ||
+		(nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE));
 
 	/* Check if our cached file size is stale */
  	new_isize = nfs_size_to_loff_t(fattr->size);

diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index f3bf016..cff10ab 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c

@@ -91,6 +91,7 @@
 			next = _rb;
 			break;
 		}
+		pos--;
 	}
 
 	return next;

diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h
index 1b383e3..0b40bad 100644
--- a/include/asm-alpha/atomic.h
+++ b/include/asm-alpha/atomic.h

@@ -100,18 +100,19 @@
 static __inline__ long atomic_add_return(int i, atomic_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%1\n"
 	"	addl %0,%3,%2\n"
 	"	addl %0,%3,%0\n"
 	"	stl_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
@@ -120,54 +121,57 @@
 static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%1\n"
 	"	addq %0,%3,%2\n"
 	"	addq %0,%3,%0\n"
 	"	stq_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
 static __inline__ long atomic_sub_return(int i, atomic_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%1\n"
 	"	subl %0,%3,%2\n"
 	"	subl %0,%3,%0\n"
 	"	stl_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 
 static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 {
 	long temp, result;
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%1\n"
 	"	subq %0,%3,%2\n"
 	"	subq %0,%3,%0\n"
 	"	stq_c %0,%1\n"
 	"	beq %0,2f\n"
-	"	mb\n"
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
 	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
 	return result;
 }
 

diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
index 455da64..323b0bc 100644
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ b/include/asm-arm/arch-ixp4xx/entry-macro.S

@@ -15,25 +15,26 @@
 		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
 		ldr	\irqstat, [\irqstat]		@ get interrupts
 		cmp	\irqstat, #0
-		beq	1001f
+		beq	1001f				@ upper IRQ?
 		clz     \irqnr, \irqstat
 		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
+		sub     \irqnr, \base, \irqnr
+		b	1002f				@ lower IRQ being
+							@ handled
 
 1001:
 		/*
 		 * IXP465 has an upper IRQ status register
 		 */
 #if defined(CONFIG_CPU_IXP46X)
-		bne 	1002f
 		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
 		ldr	\irqstat, [\irqstat]		@ get upper interrupts
 		mov	\irqnr, #63
 		clz	\irqstat, \irqstat
  		cmp	\irqstat, #32
 		subne	\irqnr, \irqnr, \irqstat
-1002:
 #endif
+1002:
 		.endm
 
 

diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index 4ac964b..55d85ee 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h

@@ -27,7 +27,7 @@
 
 #define pcibios_assign_all_busses()	1
 
-#if defined(CONFIG_CPU_IXP465) && !defined(__ASSEMBLY__)
+#if defined(CONFIG_CPU_IXP46X) && !defined(__ASSEMBLY__)
 extern unsigned int processor_id;
 #define cpu_is_ixp465() ((processor_id & 0xffffffc0) == 0x69054200)
 #else

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 13fa2de..3af7165 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h

@@ -653,7 +653,7 @@
 
 #define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
 #define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
 #define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
 #define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
 #define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */

diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index 16f4c3c..3436070 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h

@@ -18,7 +18,9 @@
  *    10-Feb-2005 Ben Dooks	    Fixed CAMDIVN address (Guillaume Gourat)
  *    10-Mar-2005 Lucas Villa Real  Changed S3C2410_VA to S3C24XX_VA
  *    27-Aug-2005 Ben Dooks	    Add clock-slow info
- */
+ *    20-Oct-2005 Ben Dooks	    Fixed overflow in PLL (Guillaume Gourat)
+ *    20-Oct-2005 Ben Dooks	    Add masks for DCLK (Guillaume Gourat)
+*/
 
 #ifndef __ASM_ARM_REGS_CLOCK
 #define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
@@ -66,11 +68,16 @@
 #define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
 #define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
 #define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
 
 #define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
 #define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
 #define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
 #define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
 
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
@@ -83,10 +90,13 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/div64.h>
+
 static inline unsigned int
-s3c2410_get_pll(int pllval, int baseclk)
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
 {
-	int mdiv, pdiv, sdiv;
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
 
 	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
 	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
@@ -96,7 +106,10 @@
 	pdiv &= S3C2410_PLLCON_PDIVMASK;
 	sdiv &= S3C2410_PLLCON_SDIVMASK;
 
-	return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv);
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
 }
 
 #endif /* __ASSEMBLY__ */

diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h
index f08dc84..852220e 100644
--- a/include/asm-arm/locks.h
+++ b/include/asm-arm/locks.h

@@ -103,7 +103,7 @@
 	({					\
 	smp_mb();				\
 	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
+	"@ up_op_write\n"			\
 "1:	ldrex	lr, [%0]\n"			\
 "	adds	lr, lr, %1\n"			\
 "	strex	ip, lr, [%0]\n"			\
@@ -231,7 +231,7 @@
 #define __up_op_write(ptr,wake)			\
 	({					\
 	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
+	"@ up_op_write\n"			\
 "	mrs	ip, cpsr\n"			\
 "	orr	lr, ip, #128\n"			\
 "	msr	cpsr_c, lr\n"			\

diff --git a/include/linux/aio.h b/include/linux/aio.h
index 60def65..0decf66 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h

@@ -24,7 +24,12 @@
 #define KIOCB_SYNC_KEY		(~0U)
 
 /* ki_flags bits */
-#define KIF_LOCKED		0
+/*
+ * This may be used for cancel/retry serialization in the future, but
+ * for now it's unused and we probably don't want modules to even
+ * think they can use it.
+ */
+/* #define KIF_LOCKED		0 */
 #define KIF_KICKED		1
 #define KIF_CANCELLED		2
 

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 82bd884..3b03b0b 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h

@@ -43,7 +43,7 @@
 extern unsigned long __init bootmem_bootmap_pages (unsigned long);
 extern unsigned long __init init_bootmem (unsigned long addr, unsigned long memend);
 extern void __init free_bootmem (unsigned long addr, unsigned long size);
-extern void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal);
+extern void * __init __alloc_bootmem_limit (unsigned long size, unsigned long align, unsigned long goal, unsigned long limit);
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 extern void __init reserve_bootmem (unsigned long addr, unsigned long size);
 #define alloc_bootmem(x) \
@@ -54,6 +54,16 @@
 	__alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem((x), PAGE_SIZE, 0)
+
+#define alloc_bootmem_limit(x, limit)						\
+	__alloc_bootmem_limit((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS), (limit))
+#define alloc_bootmem_low_limit(x, limit)			\
+	__alloc_bootmem_limit((x), SMP_CACHE_BYTES, 0, (limit))
+#define alloc_bootmem_pages_limit(x, limit)					\
+	__alloc_bootmem_limit((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS), (limit))
+#define alloc_bootmem_low_pages_limit(x, limit)		\
+	__alloc_bootmem_limit((x), PAGE_SIZE, 0, (limit))
+
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 extern unsigned long __init free_all_bootmem (void);
 
@@ -61,7 +71,7 @@
 extern void __init reserve_bootmem_node (pg_data_t *pgdat, unsigned long physaddr, unsigned long size);
 extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size);
 extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat);
-extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal);
+extern void * __init __alloc_bootmem_node_limit (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal, unsigned long limit);
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
@@ -69,6 +79,14 @@
 	__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages_node(pgdat, x) \
 	__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0)
+
+#define alloc_bootmem_node_limit(pgdat, x, limit)				\
+	__alloc_bootmem_node_limit((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS), (limit))
+#define alloc_bootmem_pages_node_limit(pgdat, x, limit)				\
+	__alloc_bootmem_node_limit((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS), (limit))
+#define alloc_bootmem_low_pages_node_limit(pgdat, x, limit)		\
+	__alloc_bootmem_node_limit((pgdat), (x), PAGE_SIZE, 0, (limit))
+
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
 #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
@@ -105,5 +123,15 @@
 #endif
 extern int __initdata hashdist;		/* Distribute hashes across NUMA nodes? */
 
+static inline void *__alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal)
+{
+	return __alloc_bootmem_limit(size, align, goal, 0);
+}
+
+static inline void *__alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align,
+				     unsigned long goal)
+{
+	return __alloc_bootmem_node_limit(pgdat, size, align, goal, 0);
+}
 
 #endif /* _LINUX_BOOTMEM_H */

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index fe97783..9bdba81 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h

@@ -393,15 +393,13 @@
 #define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map)
 
 /* Find the highest possible smp_processor_id() */
-static inline unsigned int highest_possible_processor_id(void)
-{
-	unsigned int cpu, highest = 0;
-
-	for_each_cpu_mask(cpu, cpu_possible_map)
-		highest = cpu;
-
-	return highest;
-}
+#define highest_possible_processor_id() \
+({ \
+	unsigned int cpu, highest = 0; \
+	for_each_cpu_mask(cpu, cpu_possible_map) \
+		highest = cpu; \
+	highest; \
+})
 
 
 #endif /* __LINUX_CPUMASK_H */

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index e670b0d..d664330 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h

@@ -25,6 +25,8 @@
 unsigned long hugetlb_total_pages(void);
 struct page *alloc_huge_page(void);
 void free_huge_page(struct page *);
+int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, int write_access);
 
 extern unsigned long max_huge_pages;
 extern const unsigned long hugetlb_zero, hugetlb_infinity;
@@ -99,6 +101,7 @@
 						do { } while (0)
 #define alloc_huge_page()			({ NULL; })
 #define free_huge_page(p)			({ (void)(p); BUG(); })
+#define hugetlb_fault(mm, vma, addr, write)	({ BUG(); 0; })
 
 #ifndef HPAGE_MASK
 #define HPAGE_MASK	0		/* Keep the compiler happy */

diff --git a/include/linux/idr.h b/include/linux/idr.h
index ca3b7e4..3d5de45 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h

@@ -75,4 +75,5 @@
 int idr_get_new(struct idr *idp, void *ptr, int *id);
 int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
 void idr_remove(struct idr *idp, int id);
+void idr_destroy(struct idr *idp);
 void idr_init(struct idr *idp);

diff --git a/include/linux/list.h b/include/linux/list.h
index e6ec596..084971f 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h

@@ -442,12 +442,14 @@
  * as long as the traversal is guarded by rcu_read_lock().
  */
 #define list_for_each_rcu(pos, head) \
-	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
-        	pos = rcu_dereference(pos->next))
+	for (pos = (head)->next; \
+		prefetch(rcu_dereference(pos)->next), pos != (head); \
+        	pos = pos->next)
 
 #define __list_for_each_rcu(pos, head) \
-	for (pos = (head)->next; pos != (head); \
-        	pos = rcu_dereference(pos->next))
+	for (pos = (head)->next; \
+		rcu_dereference(pos) != (head); \
+        	pos = pos->next)
 
 /**
  * list_for_each_safe_rcu	-	iterate over an rcu-protected list safe
@@ -461,8 +463,9 @@
  * as long as the traversal is guarded by rcu_read_lock().
  */
 #define list_for_each_safe_rcu(pos, n, head) \
-	for (pos = (head)->next, n = pos->next; pos != (head); \
-		pos = rcu_dereference(n), n = pos->next)
+	for (pos = (head)->next; \
+		n = rcu_dereference(pos)->next, pos != (head); \
+		pos = n)
 
 /**
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
@@ -474,11 +477,11 @@
  * the _rcu list-mutation primitives such as list_add_rcu()
  * as long as the traversal is guarded by rcu_read_lock().
  */
-#define list_for_each_entry_rcu(pos, head, member)			\
-	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     prefetch(pos->member.next), &pos->member != (head); 	\
-	     pos = rcu_dereference(list_entry(pos->member.next, 	\
-					typeof(*pos), member)))
+#define list_for_each_entry_rcu(pos, head, member) \
+	for (pos = list_entry((head)->next, typeof(*pos), member); \
+		prefetch(rcu_dereference(pos)->member.next), \
+			&pos->member != (head); \
+		pos = list_entry(pos->member.next, typeof(*pos), member))
 
 
 /**
@@ -492,8 +495,9 @@
  * as long as the traversal is guarded by rcu_read_lock().
  */
 #define list_for_each_continue_rcu(pos, head) \
-	for ((pos) = (pos)->next; prefetch((pos)->next), (pos) != (head); \
-        	(pos) = rcu_dereference((pos)->next))
+	for ((pos) = (pos)->next; \
+		prefetch(rcu_dereference((pos))->next), (pos) != (head); \
+        	(pos) = (pos)->next)
 
 /*
  * Double linked lists with a single pointer list head.
@@ -696,8 +700,9 @@
 	     pos = n)
 
 #define hlist_for_each_rcu(pos, head) \
-	for ((pos) = (head)->first; pos && ({ prefetch((pos)->next); 1; }); \
-		(pos) = rcu_dereference((pos)->next))
+	for ((pos) = (head)->first; \
+		rcu_dereference((pos)) && ({ prefetch((pos)->next); 1; }); \
+		(pos) = (pos)->next)
 
 /**
  * hlist_for_each_entry	- iterate over list of given type
@@ -762,9 +767,9 @@
  */
 #define hlist_for_each_entry_rcu(tpos, pos, head, member)		 \
 	for (pos = (head)->first;					 \
-	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+	     rcu_dereference(pos) && ({ prefetch(pos->next); 1;}) &&	 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = rcu_dereference(pos->next))
+	     pos = pos->next)
 
 #else
 #warning "don't include kernel headers in userspace"

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 4e65eb4..70191a5 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h

@@ -94,6 +94,7 @@
 	long  	       	batch;           /* Batch # for current RCU batch */
 	struct rcu_head *nxtlist;
 	struct rcu_head **nxttail;
+	long            count; /* # of queued items */
 	struct rcu_head *curlist;
 	struct rcu_head **curtail;
 	struct rcu_head *donelist;

diff --git a/include/net/ax25.h b/include/net/ax25.h
index 9dbcd9e..30bb4a8 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h

@@ -171,7 +171,7 @@
 	ax25_address		calls[AX25_MAX_DIGIS];
 	unsigned char		repeated[AX25_MAX_DIGIS];
 	unsigned char		ndigi;
-	char			lastrepeat;
+	signed char		lastrepeat;
 } ax25_digi;
 
 typedef struct ax25_route {

diff --git a/kernel/exit.c b/kernel/exit.c
index 4307773..3b25b18 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c

@@ -843,6 +843,7 @@
 	group_dead = atomic_dec_and_test(&tsk->signal->live);
 	if (group_dead) {
  		del_timer_sync(&tsk->signal->real_timer);
+		exit_itimers(tsk->signal);
 		acct_process(code);
 	}
 	exit_mm(tsk);

diff --git a/kernel/fork.c b/kernel/fork.c
index 533ce27..280bd44 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c

@@ -848,7 +848,7 @@
 {
 	unsigned long new_flags = p->flags;
 
-	new_flags &= ~PF_SUPERPRIV;
+	new_flags &= ~(PF_SUPERPRIV | PF_NOFREEZE);
 	new_flags |= PF_FORKNOEXEC;
 	if (!(clone_flags & CLONE_PTRACE))
 		p->ptrace = 0;

diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index ad85d3f..d30b304 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c

@@ -424,6 +424,7 @@
 	cputime_t ptime = cputime_add(utime, stime);
 
 	list_for_each_entry_safe(timer, next, head, entry) {
+		put_task_struct(timer->task);
 		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (cputime_lt(timer->expires.cpu, ptime)) {
@@ -436,6 +437,7 @@
 
 	++head;
 	list_for_each_entry_safe(timer, next, head, entry) {
+		put_task_struct(timer->task);
 		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (cputime_lt(timer->expires.cpu, utime)) {
@@ -448,6 +450,7 @@
 
 	++head;
 	list_for_each_entry_safe(timer, next, head, entry) {
+		put_task_struct(timer->task);
 		timer->task = NULL;
 		list_del_init(&timer->entry);
 		if (timer->expires.sched < sched_time) {
@@ -958,14 +961,16 @@
 static void check_thread_timers(struct task_struct *tsk,
 				struct list_head *firing)
 {
+	int maxfire;
 	struct list_head *timers = tsk->cpu_timers;
 
+	maxfire = 20;
 	tsk->it_prof_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(prof_ticks(tsk), t->expires.cpu)) {
 			tsk->it_prof_expires = t->expires.cpu;
 			break;
 		}
@@ -974,12 +979,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	tsk->it_virt_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(virt_ticks(tsk), t->expires.cpu)) {
 			tsk->it_virt_expires = t->expires.cpu;
 			break;
 		}
@@ -988,12 +994,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	tsk->it_sched_expires = 0;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (tsk->sched_time < t->expires.sched) {
+		if (!--maxfire || tsk->sched_time < t->expires.sched) {
 			tsk->it_sched_expires = t->expires.sched;
 			break;
 		}
@@ -1010,6 +1017,7 @@
 static void check_process_timers(struct task_struct *tsk,
 				 struct list_head *firing)
 {
+	int maxfire;
 	struct signal_struct *const sig = tsk->signal;
 	cputime_t utime, stime, ptime, virt_expires, prof_expires;
 	unsigned long long sched_time, sched_expires;
@@ -1042,12 +1050,13 @@
 	} while (t != tsk);
 	ptime = cputime_add(utime, stime);
 
+	maxfire = 20;
 	prof_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(ptime, t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(ptime, t->expires.cpu)) {
 			prof_expires = t->expires.cpu;
 			break;
 		}
@@ -1056,12 +1065,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	virt_expires = cputime_zero;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (cputime_lt(utime, t->expires.cpu)) {
+		if (!--maxfire || cputime_lt(utime, t->expires.cpu)) {
 			virt_expires = t->expires.cpu;
 			break;
 		}
@@ -1070,12 +1080,13 @@
 	}
 
 	++timers;
+	maxfire = 20;
 	sched_expires = 0;
 	while (!list_empty(timers)) {
 		struct cpu_timer_list *t = list_entry(timers->next,
 						      struct cpu_timer_list,
 						      entry);
-		if (sched_time < t->expires.sched) {
+		if (!--maxfire || sched_time < t->expires.sched) {
 			sched_expires = t->expires.sched;
 			break;
 		}

diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index b7b532a..dda3cda 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c

@@ -1157,7 +1157,7 @@
 }
 
 /*
- * This is called by __exit_signal, only when there are no more
+ * This is called by do_exit or de_thread, only when there are no more
  * references to the shared signal_struct.
  */
 void exit_itimers(struct signal_struct *sig)

diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index bef3b69..2559d4b 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c

@@ -71,7 +71,7 @@
 
 /* Fake initialization required by compiler */
 static DEFINE_PER_CPU(struct tasklet_struct, rcu_tasklet) = {NULL};
-static int maxbatch = 10;
+static int maxbatch = 10000;
 
 #ifndef __HAVE_ARCH_CMPXCHG
 /*
@@ -109,6 +109,10 @@
 	rdp = &__get_cpu_var(rcu_data);
 	*rdp->nxttail = head;
 	rdp->nxttail = &head->next;
+
+	if (unlikely(++rdp->count > 10000))
+		set_need_resched();
+
 	local_irq_restore(flags);
 }
 
@@ -140,6 +144,12 @@
 	rdp = &__get_cpu_var(rcu_bh_data);
 	*rdp->nxttail = head;
 	rdp->nxttail = &head->next;
+	rdp->count++;
+/*
+ *  Should we directly call rcu_do_batch() here ?
+ *  if (unlikely(rdp->count > 10000))
+ *      rcu_do_batch(rdp);
+ */
 	local_irq_restore(flags);
 }
 
@@ -157,6 +167,7 @@
 		next = rdp->donelist = list->next;
 		list->func(list);
 		list = next;
+		rdp->count--;
 		if (++count >= maxbatch)
 			break;
 	}

diff --git a/kernel/signal.c b/kernel/signal.c
index 50c9926..f2b96b0 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c

@@ -397,20 +397,8 @@
 	flush_sigqueue(&tsk->pending);
 	if (sig) {
 		/*
-		 * We are cleaning up the signal_struct here.  We delayed
-		 * calling exit_itimers until after flush_sigqueue, just in
-		 * case our thread-local pending queue contained a queued
-		 * timer signal that would have been cleared in
-		 * exit_itimers.  When that called sigqueue_free, it would
-		 * attempt to re-take the tasklist_lock and deadlock.  This
-		 * can never happen if we ensure that all queues the
-		 * timer's signal might be queued on have been flushed
-		 * first.  The shared_pending queue, and our own pending
-		 * queue are the only queues the timer could be on, since
-		 * there are no other threads left in the group and timer
-		 * signals are constrained to threads inside the group.
+		 * We are cleaning up the signal_struct here.
 		 */
-		exit_itimers(sig);
 		exit_thread_group_keys(sig);
 		kmem_cache_free(signal_cachep, sig);
 	}

diff --git a/lib/.gitignore b/lib/.gitignore
new file mode 100644
index 0000000..3bef1ea
--- /dev/null
+++ b/lib/.gitignore

@@ -0,0 +1,6 @@
+#
+# Generated files
+#
+gen_crc32table
+crc32table.h
+

diff --git a/lib/idr.c b/lib/idr.c
index 6415d05..d4df21d 100644
--- a/lib/idr.c
+++ b/lib/idr.c

@@ -346,6 +346,19 @@
 EXPORT_SYMBOL(idr_remove);
 
 /**
+ * idr_destroy - release all cached layers within an idr tree
+ * idp: idr handle
+ */
+void idr_destroy(struct idr *idp)
+{
+	while (idp->id_free_cnt) {
+		struct idr_layer *p = alloc_layer(idp);
+		kmem_cache_free(idr_layer_cache, p);
+	}
+}
+EXPORT_SYMBOL(idr_destroy);
+
+/**
  * idr_find - return pointer for given id
  * @idp: idr handle
  * @id: lookup key

diff --git a/mm/bootmem.c b/mm/bootmem.c
index c1330cc..a58699b 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c

@@ -154,10 +154,10 @@
  */
 static void * __init
 __alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
-		unsigned long align, unsigned long goal)
+	      unsigned long align, unsigned long goal, unsigned long limit)
 {
 	unsigned long offset, remaining_size, areasize, preferred;
-	unsigned long i, start = 0, incr, eidx;
+	unsigned long i, start = 0, incr, eidx, end_pfn = bdata->node_low_pfn;
 	void *ret;
 
 	if(!size) {
@@ -166,7 +166,14 @@
 	}
 	BUG_ON(align & (align-1));
 
-	eidx = bdata->node_low_pfn - (bdata->node_boot_start >> PAGE_SHIFT);
+	if (limit && bdata->node_boot_start >= limit)
+		return NULL;
+
+        limit >>=PAGE_SHIFT;
+	if (limit && end_pfn > limit)
+		end_pfn = limit;
+
+	eidx = end_pfn - (bdata->node_boot_start >> PAGE_SHIFT);
 	offset = 0;
 	if (align &&
 	    (bdata->node_boot_start & (align - 1UL)) != 0)
@@ -178,11 +185,12 @@
 	 * first, then we try to allocate lower pages.
 	 */
 	if (goal && (goal >= bdata->node_boot_start) && 
-	    ((goal >> PAGE_SHIFT) < bdata->node_low_pfn)) {
+	    ((goal >> PAGE_SHIFT) < end_pfn)) {
 		preferred = goal - bdata->node_boot_start;
 
 		if (bdata->last_success >= preferred)
-			preferred = bdata->last_success;
+			if (!limit || (limit && limit > bdata->last_success))
+				preferred = bdata->last_success;
 	} else
 		preferred = 0;
 
@@ -382,14 +390,15 @@
 	return(free_all_bootmem_core(NODE_DATA(0)));
 }
 
-void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal)
+void * __init __alloc_bootmem_limit (unsigned long size, unsigned long align, unsigned long goal,
+				unsigned long limit)
 {
 	pg_data_t *pgdat = pgdat_list;
 	void *ptr;
 
 	for_each_pgdat(pgdat)
 		if ((ptr = __alloc_bootmem_core(pgdat->bdata, size,
-						align, goal)))
+						 align, goal, limit)))
 			return(ptr);
 
 	/*
@@ -400,14 +409,16 @@
 	return NULL;
 }
 
-void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal)
+
+void * __init __alloc_bootmem_node_limit (pg_data_t *pgdat, unsigned long size, unsigned long align,
+				     unsigned long goal, unsigned long limit)
 {
 	void *ptr;
 
-	ptr = __alloc_bootmem_core(pgdat->bdata, size, align, goal);
+	ptr = __alloc_bootmem_core(pgdat->bdata, size, align, goal, limit);
 	if (ptr)
 		return (ptr);
 
-	return __alloc_bootmem(size, align, goal);
+	return __alloc_bootmem_limit(size, align, goal, limit);
 }
 

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 901ac52..61d3806 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c

@@ -274,21 +274,22 @@
 {
 	pte_t *src_pte, *dst_pte, entry;
 	struct page *ptepage;
-	unsigned long addr = vma->vm_start;
-	unsigned long end = vma->vm_end;
+	unsigned long addr;
 
-	while (addr < end) {
+	for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
 		dst_pte = huge_pte_alloc(dst, addr);
 		if (!dst_pte)
 			goto nomem;
+		spin_lock(&src->page_table_lock);
 		src_pte = huge_pte_offset(src, addr);
-		BUG_ON(!src_pte || pte_none(*src_pte)); /* prefaulted */
-		entry = *src_pte;
-		ptepage = pte_page(entry);
-		get_page(ptepage);
-		add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
-		set_huge_pte_at(dst, addr, dst_pte, entry);
-		addr += HPAGE_SIZE;
+		if (src_pte && !pte_none(*src_pte)) {
+			entry = *src_pte;
+			ptepage = pte_page(entry);
+			get_page(ptepage);
+			add_mm_counter(dst, rss, HPAGE_SIZE / PAGE_SIZE);
+			set_huge_pte_at(dst, addr, dst_pte, entry);
+		}
+		spin_unlock(&src->page_table_lock);
 	}
 	return 0;
 
@@ -323,8 +324,8 @@
 
 		page = pte_page(pte);
 		put_page(page);
+		add_mm_counter(mm, rss,  - (HPAGE_SIZE / PAGE_SIZE));
 	}
-	add_mm_counter(mm, rss,  -((end - start) >> PAGE_SHIFT));
 	flush_tlb_range(vma, start, end);
 }
 
@@ -393,6 +394,28 @@
 	return ret;
 }
 
+/*
+ * On ia64 at least, it is possible to receive a hugetlb fault from a
+ * stale zero entry left in the TLB from earlier hardware prefetching.
+ * Low-level arch code should already have flushed the stale entry as
+ * part of its fault handling, but we do need to accept this minor fault
+ * and return successfully.  Whereas the "normal" case is that this is
+ * an access to a hugetlb page which has been truncated off since mmap.
+ */
+int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, int write_access)
+{
+	int ret = VM_FAULT_SIGBUS;
+	pte_t *pte;
+
+	spin_lock(&mm->page_table_lock);
+	pte = huge_pte_offset(mm, address);
+	if (pte && !pte_none(*pte))
+		ret = VM_FAULT_MINOR;
+	spin_unlock(&mm->page_table_lock);
+	return ret;
+}
+
 int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			struct page **pages, struct vm_area_struct **vmas,
 			unsigned long *position, int *length, int i)
@@ -403,6 +426,7 @@
 	BUG_ON(!is_vm_hugetlb_page(vma));
 
 	vpfn = vaddr/PAGE_SIZE;
+	spin_lock(&mm->page_table_lock);
 	while (vaddr < vma->vm_end && remainder) {
 
 		if (pages) {
@@ -415,8 +439,13 @@
 			 * indexing below to work. */
 			pte = huge_pte_offset(mm, vaddr & HPAGE_MASK);
 
-			/* hugetlb should be locked, and hence, prefaulted */
-			WARN_ON(!pte || pte_none(*pte));
+			/* the hugetlb file might have been truncated */
+			if (!pte || pte_none(*pte)) {
+				remainder = 0;
+				if (!i)
+					i = -EFAULT;
+				break;
+			}
 
 			page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
 
@@ -434,7 +463,7 @@
 		--remainder;
 		++i;
 	}
-
+	spin_unlock(&mm->page_table_lock);
 	*length = remainder;
 	*position = vaddr;
 

diff --git a/mm/memory.c b/mm/memory.c
index ae8161f..1db40e9 100644
--- a/mm/memory.c
+++ b/mm/memory.c

@@ -2045,8 +2045,8 @@
 
 	inc_page_state(pgfault);
 
-	if (is_vm_hugetlb_page(vma))
-		return VM_FAULT_SIGBUS;	/* mapping truncation does this. */
+	if (unlikely(is_vm_hugetlb_page(vma)))
+		return hugetlb_fault(mm, vma, address, write_access);
 
 	/*
 	 * We need the page table lock to synchronize with kswapd

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 0ea71e8..64f9570 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c

@@ -511,10 +511,11 @@
 		 * PageDirty _after_ making sure that the page is freeable and
 		 * not in use by anybody. 	(pagecache + us == 2)
 		 */
-		if (page_count(page) != 2 || PageDirty(page)) {
-			write_unlock_irq(&mapping->tree_lock);
-			goto keep_locked;
-		}
+		if (unlikely(page_count(page) != 2))
+			goto cannot_free;
+		smp_rmb();
+		if (unlikely(PageDirty(page)))
+			goto cannot_free;
 
 #ifdef CONFIG_SWAP
 		if (PageSwapCache(page)) {
@@ -538,6 +539,10 @@
 			__pagevec_release_nonlru(&freed_pvec);
 		continue;
 
+cannot_free:
+		write_unlock_irq(&mapping->tree_lock);
+		goto keep_locked;
+
 activate_locked:
 		SetPageActive(page);
 		pgactivate++;

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 4128fc7..1dcf7fa 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c

@@ -175,39 +175,10 @@
 	}
 }
 
-void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
+static void neigh_flush_dev(struct neigh_table *tbl, struct net_device *dev)
 {
 	int i;
 
-	write_lock_bh(&tbl->lock);
-
-	for (i=0; i <= tbl->hash_mask; i++) {
-		struct neighbour *n, **np;
-
-		np = &tbl->hash_buckets[i];
-		while ((n = *np) != NULL) {
-			if (dev && n->dev != dev) {
-				np = &n->next;
-				continue;
-			}
-			*np = n->next;
-			write_lock_bh(&n->lock);
-			n->dead = 1;
-			neigh_del_timer(n);
-			write_unlock_bh(&n->lock);
-			neigh_release(n);
-		}
-	}
-
-        write_unlock_bh(&tbl->lock);
-}
-
-int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
-{
-	int i;
-
-	write_lock_bh(&tbl->lock);
-
 	for (i = 0; i <= tbl->hash_mask; i++) {
 		struct neighbour *n, **np = &tbl->hash_buckets[i];
 
@@ -243,7 +214,19 @@
 			neigh_release(n);
 		}
 	}
+}
 
+void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev)
+{
+	write_lock_bh(&tbl->lock);
+	neigh_flush_dev(tbl, dev);
+	write_unlock_bh(&tbl->lock);
+}
+
+int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev)
+{
+	write_lock_bh(&tbl->lock);
+	neigh_flush_dev(tbl, dev);
 	pneigh_ifdown(tbl, dev);
 	write_unlock_bh(&tbl->lock);
 
@@ -732,6 +715,7 @@
 	if (unlikely(mod_timer(&n->timer, when))) {
 		printk("NEIGH: BUG, double timer add, state is %x\n",
 		       n->nud_state);
+		dump_stack();
 	}
 }
 
@@ -815,10 +799,10 @@
 	}
 
 	if (neigh->nud_state & NUD_IN_TIMER) {
-		neigh_hold(neigh);
 		if (time_before(next, jiffies + HZ/2))
 			next = jiffies + HZ/2;
-		neigh_add_timer(neigh, next);
+		if (!mod_timer(&neigh->timer, next))
+			neigh_hold(neigh);
 	}
 	if (neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) {
 		struct sk_buff *skb = skb_peek(&neigh->arp_queue);

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index af9b151..02cd4cd 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c

@@ -410,6 +410,9 @@
 	C(nfct);
 	nf_conntrack_get(skb->nfct);
 	C(nfctinfo);
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	C(ipvs_property);
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	C(nf_bridge);
 	nf_bridge_get(skb->nf_bridge);
@@ -467,6 +470,9 @@
 	new->nfct	= old->nfct;
 	nf_conntrack_get(old->nfct);
 	new->nfctinfo	= old->nfctinfo;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	new->ipvs_property = old->ipvs_property;
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	new->nf_bridge	= old->nf_bridge;
 	nf_bridge_get(old->nf_bridge);

diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index ae088d1..6298cf5 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c

@@ -463,6 +463,7 @@
 	if (skb != NULL) {
 		const struct inet_request_sock *ireq = inet_rsk(req);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_build_and_send_pkt(skb, sk, ireq->loc_addr,
 					    ireq->rmt_addr,
 					    ireq->opt);
@@ -647,6 +648,7 @@
 	if (skb != NULL) {
 		const struct inet_sock *inet = inet_sk(sk);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_build_and_send_pkt(skb, sk,
 					    inet->saddr, inet->daddr, NULL);
 		if (err == NET_XMIT_CN)

diff --git a/net/dccp/output.c b/net/dccp/output.c
index 4786bdc..2925074 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c

@@ -62,10 +62,8 @@
 		
 		skb->h.raw = skb_push(skb, dccp_header_size);
 		dh = dccp_hdr(skb);
-		/*
-		 * Data packets are not cloned as they are never retransmitted
-		 */
-		if (skb_cloned(skb))
+
+		if (!skb->sk)
 			skb_set_owner_w(skb, sk);
 
 		/* Build DCCP header and checksum it. */
@@ -102,6 +100,7 @@
 
 		DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
 
+		memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 		err = ip_queue_xmit(skb, 0);
 		if (err <= 0)
 			return err;
@@ -243,7 +242,8 @@
 
 		err = dccp_transmit_skb(sk, skb);
 		ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, 0, len);
-	}
+	} else
+		kfree_skb(skb);
 
 	return err;
 }

diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index a1cfd0e..a021c34 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c

@@ -402,8 +402,6 @@
 	 *     This bug was _quickly_ found & fixed by just looking at an OSTRA
 	 *     generated callgraph 8) -acme
 	 */
-	if (rc != 0)
-		goto out_discard;
 out_release:
 	release_sock(sk);
 	return rc ? : len;

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 3f1a263..1ad5202 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c

@@ -391,6 +391,9 @@
 	to->nfct = from->nfct;
 	nf_conntrack_get(to->nfct);
 	to->nfctinfo = from->nfctinfo;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+	to->ipvs_property = from->ipvs_property;
+#endif
 #ifdef CONFIG_BRIDGE_NETFILTER
 	nf_bridge_put(to->nf_bridge);
 	to->nf_bridge = from->nf_bridge;

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 7114031..b907456 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c

@@ -435,17 +435,7 @@
 	int nsize, old_factor;
 	u16 flags;
 
-	if (unlikely(len >= skb->len)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TCP: seg_size=%u, mss=%u, seq=%u, "
-			       "end_seq=%u, skb->len=%u.\n", len, mss_now,
-			       TCP_SKB_CB(skb)->seq, TCP_SKB_CB(skb)->end_seq,
-			       skb->len);
-			WARN_ON(1);
-		}
-		return 0;
-	}
-
+	BUG_ON(len > skb->len);
 	nsize = skb_headlen(skb) - len;
 	if (nsize < 0)
 		nsize = 0;

diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index b03e906..21deec2 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c

@@ -975,7 +975,6 @@
 		struct ip6t_entry *table_base;
 		unsigned int i;
 
-		for (i = 0; i < num_possible_cpus(); i++) {
 		for_each_cpu(i) {
 			table_base =
 				(void *)newinfo->entries

diff --git a/scripts/.gitignore b/scripts/.gitignore
new file mode 100644
index 0000000..b46d68b
--- /dev/null
+++ b/scripts/.gitignore

@@ -0,0 +1,4 @@
+conmakehash
+kallsyms
+pnmtologo
+

diff --git a/scripts/basic/.gitignore b/scripts/basic/.gitignore
new file mode 100644
index 0000000..7304e19
--- /dev/null
+++ b/scripts/basic/.gitignore

@@ -0,0 +1,3 @@
+fixdep
+split-include
+docproc

diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
new file mode 100644
index 0000000..2dac344
--- /dev/null
+++ b/scripts/kconfig/.gitignore

@@ -0,0 +1,16 @@
+#
+# Generated files
+#
+config*
+lex.*.c
+*.tab.c
+*.tab.h
+
+#
+# configuration programs
+#
+conf
+mconf
+qconf
+gconf
+kxgettext

diff --git a/scripts/mod/.gitignore b/scripts/mod/.gitignore
new file mode 100644
index 0000000..e9b7abe
--- /dev/null
+++ b/scripts/mod/.gitignore

@@ -0,0 +1,4 @@
+elfconfig.h
+mk_elfconfig
+modpost
+

diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 8eb140d..a45cc97 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c

@@ -879,7 +879,7 @@
 	if (sscanf(page, "%d", &new_value) != 1)
 		goto out;
 
-	if (new_value) {
+	if (new_value && bool_pending_values) {
 		security_set_bools(bool_num, bool_pending_values);
 	}
 
@@ -952,6 +952,7 @@
 
 	/* remove any existing files */
 	kfree(bool_pending_values);
+	bool_pending_values = NULL;
 
 	sel_remove_bools(dir);
 
@@ -1002,6 +1003,7 @@
 	}
 	return ret;
 err:
+	kfree(values);
 	d_genocide(dir);
 	ret = -ENOMEM;
 	goto out;

diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 0a75832..8e6262d 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c

@@ -650,8 +650,10 @@
 	}
 	if (lrt) kfree(lrt);
 
-	for (i = 0; i < p->p_types.nprim; i++)
-		ebitmap_destroy(&p->type_attr_map[i]);
+	if (p->type_attr_map) {
+		for (i = 0; i < p->p_types.nprim; i++)
+			ebitmap_destroy(&p->type_attr_map[i]);
+	}
 	kfree(p->type_attr_map);
 
 	return;

diff --git a/usr/.gitignore b/usr/.gitignore
new file mode 100644
index 0000000..be186a8
--- /dev/null
+++ b/usr/.gitignore

@@ -0,0 +1,7 @@
+#
+# Generated files
+#
+gen_init_cpio
+initramfs_data.cpio
+initramfs_data.cpio.gz
+initramfs_list
commit	ba9e358fd04190a59e605c2963a15e014139a707	[log] [tgz]
author	Linus Torvalds <torvalds@g5.osdl.org>	Sun Oct 23 17:13:14 2005 -0700
committer	Linus Torvalds <torvalds@g5.osdl.org>	Sun Oct 23 17:13:14 2005 -0700
tree	05b4baf382124a9a0342777127c09832dcbd88c0
parent	75eeec2f3fd9e8a16777219ebf1bf8395845faa7 [diff]
parent	055787e447a6cf50aa1cc42f7d3b07f08223dd9b [diff]