Merge branch 'next/soc' into next/multiplatform
* next/soc: (50 commits)
ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
ARM: bcm2835: instantiate console UART
ARM: bcm2835: add stub clock driver
ARM: bcm2835: add system timer
ARM: bcm2835: add interrupt controller driver
ARM: add infra-structure for BCM2835 and Raspberry Pi
ARM: tegra20: add CPU hotplug support
ARM: tegra30: add CPU hotplug support
ARM: tegra: clean up the common assembly macros into sleep.h
ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops
ARM: tegra: introduce tegra_cpu_car_ops structures
ARM: Tegra: Add smp_twd clock for Tegra20
ARM: AM33XX: clock: Add dcan clock aliases for device-tree
ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions
ARM: OMAP: omap_device: idle devices with no driver bound
ARM: OMAP: omap_device: don't attempt late suspend if no driver bound
ARM: OMAP: omap_device: keep track of driver bound status
ARM: OMAP3+: hwmod: Add AM33XX HWMOD data
ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework
...
Change/remove conflict in arch/arm/mach-ux500/clock.c resolved.
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 816d607..8b46c79 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -1,4 +1,4 @@
- S3C2410 GPIO Control
+ S3C24XX GPIO Control
====================
Introduction
@@ -12,7 +12,7 @@
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
- See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+ See Documentation/arm/Samsung/GPIO.txt for the core implementation.
GPIOLIB
@@ -41,8 +41,8 @@
GPIOLIB conversion
------------------
-If you need to convert your board or driver to use gpiolib from the exiting
-s3c2410 api, then here are some notes on the process.
+If you need to convert your board or driver to use gpiolib from the phased
+out s3c2410 API, then here are some notes on the process.
1) If your board is exclusively using an GPIO, say to control peripheral
power, then it will require to claim the gpio with gpio_request() before
@@ -55,7 +55,7 @@
as they have the same arguments, and can either take the pin specific
values, or the more generic special-function-number arguments.
-3) s3c2410_gpio_pullup() changs have the problem that whilst the
+3) s3c2410_gpio_pullup() changes have the problem that whilst the
s3c2410_gpio_pullup(x, 1) can be easily translated to the
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
are not so easy.
@@ -74,7 +74,7 @@
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
would return the value the pin is supposed to be outputting).
-6) s3c2410_gpio_getirq() should be directly replacable with the
+6) s3c2410_gpio_getirq() should be directly replaceable with the
gpio_to_irq() call.
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
@@ -105,7 +105,7 @@
-----------
Each pin has an unique number associated with it in regs-gpio.h,
- eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
+ e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
With the conversion to gpiolib, there is no longer a direct conversion
@@ -120,31 +120,27 @@
The following function allows the configuration of a given pin to
be changed.
- void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+ void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
- Eg:
+ e.g.:
- s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
- s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+ s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
+ s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
- The s3c_gpio_cfgpin() call is a functional replacement for this call.
-
Reading the current configuration
---------------------------------
- The current configuration of a pin can be read by using:
+ The current configuration of a pin can be read by using standard
+ gpiolib function:
- s3c2410_gpio_getcfg(unsigned int pin);
+ s3c_gpio_getcfg(unsigned int pin);
The return value will be from the same set of values which can be
- passed to s3c2410_gpio_cfgpin().
-
- The s3c_gpio_getcfg() call should be a functional replacement for
- this call.
+ passed to s3c_gpio_cfgpin().
Configuring a pull-up resistor
@@ -154,61 +150,33 @@
pull-up resistors enabled. This can be configured by the following
function:
- void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+ void s3c_gpio_setpull(unsigned int pin, unsigned int to);
- Where the to value is zero to set the pull-up off, and 1 to enable
- the specified pull-up. Any other values are currently undefined.
-
- The s3c_gpio_setpull() offers similar functionality, but with the
- ability to encode whether the pull is up or down. Currently there
- is no 'just on' state, so up or down must be selected.
+ Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
+ and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
+ values are currently undefined.
-Getting the state of a PIN
---------------------------
+Getting and setting the state of a PIN
+--------------------------------------
- The state of a pin can be read by using the function:
-
- unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
- This will return either zero or non-zero. Do not count on this
- function returning 1 if the pin is set.
-
- This call is now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-
-Setting the state of a PIN
---------------------------
-
- The value an pin is outputing can be modified by using the following:
-
- void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
- Which sets the given pin to the value. Use 0 to write 0, and 1 to
- set the output to 1.
-
- This call is now implemented by the relevant gpiolib calls, convert
+ These calls are now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Getting the IRQ number associated with a PIN
--------------------------------------------
- The following function can map the given pin number to an IRQ
+ A standard gpiolib function can map the given pin number to an IRQ
number to pass to the IRQ system.
- int s3c2410_gpio_getirq(unsigned int pin);
+ int gpio_to_irq(unsigned int pin);
Note, not all pins have an IRQ.
- This call is now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-Authour
+Author
-------
-
Ben Dooks, 03 October 2004
Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt
index 513f256..795adfd 100644
--- a/Documentation/arm/Samsung/GPIO.txt
+++ b/Documentation/arm/Samsung/GPIO.txt
@@ -5,14 +5,14 @@
------------
This outlines the Samsung GPIO implementation and the architecture
-specific calls provided alongisde the drivers/gpio core.
+specific calls provided alongside the drivers/gpio core.
S3C24XX (Legacy)
----------------
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
-about these devices. Their implementation is being brought into line
+about these devices. Their implementation has been brought into line
with the core samsung implementation described in this document.
@@ -29,7 +29,7 @@
PIN configuration
-----------------
-Pin configuration is specific to the Samsung architecutre, with each SoC
+Pin configuration is specific to the Samsung architecture, with each SoC
registering the necessary information for the core gpio configuration
implementation to configure pins as necessary.
@@ -38,5 +38,3 @@
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
on these functions.
-
-
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 208a2d4..4bfb9ff 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -51,6 +51,9 @@
ff000000 ffbfffff Reserved for future expansion of DMA
mapping region.
+fee00000 feffffff Mapping of PCI I/O space. This is a static
+ mapping within the vmalloc space.
+
VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
Memory returned by vmalloc/ioremap will
be dynamically placed in this region.
diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
new file mode 100644
index 0000000..31af1cbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
@@ -0,0 +1,17 @@
+* Marvell Tauros2 Cache
+
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+ tauros2 cache.
+ The features including
+ CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+ CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+ The definition can be found at
+ arch/arm/include/asm/hardware/cache-tauros2.h
+
+Example:
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
new file mode 100644
index 0000000..8c5907b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -0,0 +1,38 @@
+* MSM Timer
+
+Properties:
+
+- compatible : Should at least contain "qcom,msm-timer". More specific
+ properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
+ purpose timer and a debug timer respectively.
+
+- interrupts : Interrupt indicating a match event.
+
+- reg : Specifies the base address of the timer registers. The second region
+ specifies an optional register used to configure the clock divider.
+
+- clock-frequency : The frequency of the timer in Hz.
+
+Optional:
+
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+ CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+
+Example:
+
+ timer@200a004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 2 0x301>;
+ reg = <0x0200a004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ timer@200a024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 3 0x301>;
+ reg = <0x0200a024 0x10>,
+ <0x0200a034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x40000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ccdd0e5..d0051a7 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -36,6 +36,9 @@
- OMAP3 BeagleBoard : Low cost community board
compatible = "ti,omap3-beagle", "ti,omap3"
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+
- OMAP4 SDP : Software Developement Board
compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
new file mode 100644
index 0000000..a0b867e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -0,0 +1,76 @@
+* Clock bindings for Freescale i.MX23
+
+Required properties:
+- compatible: Should be "fsl,imx23-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX23
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_pwr 41
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 32 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
+ clocks = <&clks 32>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
new file mode 100644
index 0000000..aa2af28
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -0,0 +1,99 @@
+* Clock bindings for Freescale i.MX28
+
+Required properties:
+- compatible: Should be "fsl,imx28-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX28
+clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_pwr 62
+ usb1_pwr 63
+ enet_out 64
+
+Examples:
+
+clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ clock-output-names =
+ ...
+ "uart", /* 45 */
+ ...
+ "end_of_list";
+};
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ clocks = <&clks 45>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
new file mode 100644
index 0000000..492bd99
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -0,0 +1,222 @@
+* Clock bindings for Freescale i.MX6 Quad
+
+Required properties:
+- compatible: Should be "fsl,imx6q-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ ckil 1
+ ckih 2
+ osc 3
+ pll2_pfd0_352m 4
+ pll2_pfd1_594m 5
+ pll2_pfd2_396m 6
+ pll3_pfd0_720m 7
+ pll3_pfd1_540m 8
+ pll3_pfd2_508m 9
+ pll3_pfd3_454m 10
+ pll2_198m 11
+ pll3_120m 12
+ pll3_80m 13
+ pll3_60m 14
+ twd 15
+ step 16
+ pll1_sw 17
+ periph_pre 18
+ periph2_pre 19
+ periph_clk2_sel 20
+ periph2_clk2_sel 21
+ axi_sel 22
+ esai_sel 23
+ asrc_sel 24
+ spdif_sel 25
+ gpu2d_axi 26
+ gpu3d_axi 27
+ gpu2d_core_sel 28
+ gpu3d_core_sel 29
+ gpu3d_shader_sel 30
+ ipu1_sel 31
+ ipu2_sel 32
+ ldb_di0_sel 33
+ ldb_di1_sel 34
+ ipu1_di0_pre_sel 35
+ ipu1_di1_pre_sel 36
+ ipu2_di0_pre_sel 37
+ ipu2_di1_pre_sel 38
+ ipu1_di0_sel 39
+ ipu1_di1_sel 40
+ ipu2_di0_sel 41
+ ipu2_di1_sel 42
+ hsi_tx_sel 43
+ pcie_axi_sel 44
+ ssi1_sel 45
+ ssi2_sel 46
+ ssi3_sel 47
+ usdhc1_sel 48
+ usdhc2_sel 49
+ usdhc3_sel 50
+ usdhc4_sel 51
+ enfc_sel 52
+ emi_sel 53
+ emi_slow_sel 54
+ vdo_axi_sel 55
+ vpu_axi_sel 56
+ cko1_sel 57
+ periph 58
+ periph2 59
+ periph_clk2 60
+ periph2_clk2 61
+ ipg 62
+ ipg_per 63
+ esai_pred 64
+ esai_podf 65
+ asrc_pred 66
+ asrc_podf 67
+ spdif_pred 68
+ spdif_podf 69
+ can_root 70
+ ecspi_root 71
+ gpu2d_core_podf 72
+ gpu3d_core_podf 73
+ gpu3d_shader 74
+ ipu1_podf 75
+ ipu2_podf 76
+ ldb_di0_podf 77
+ ldb_di1_podf 78
+ ipu1_di0_pre 79
+ ipu1_di1_pre 80
+ ipu2_di0_pre 81
+ ipu2_di1_pre 82
+ hsi_tx_podf 83
+ ssi1_pred 84
+ ssi1_podf 85
+ ssi2_pred 86
+ ssi2_podf 87
+ ssi3_pred 88
+ ssi3_podf 89
+ uart_serial_podf 90
+ usdhc1_podf 91
+ usdhc2_podf 92
+ usdhc3_podf 93
+ usdhc4_podf 94
+ enfc_pred 95
+ enfc_podf 96
+ emi_podf 97
+ emi_slow_podf 98
+ vpu_axi_podf 99
+ cko1_podf 100
+ axi 101
+ mmdc_ch0_axi_podf 102
+ mmdc_ch1_axi_podf 103
+ arm 104
+ ahb 105
+ apbh_dma 106
+ asrc 107
+ can1_ipg 108
+ can1_serial 109
+ can2_ipg 110
+ can2_serial 111
+ ecspi1 112
+ ecspi2 113
+ ecspi3 114
+ ecspi4 115
+ ecspi5 116
+ enet 117
+ esai 118
+ gpt_ipg 119
+ gpt_ipg_per 120
+ gpu2d_core 121
+ gpu3d_core 122
+ hdmi_iahb 123
+ hdmi_isfr 124
+ i2c1 125
+ i2c2 126
+ i2c3 127
+ iim 128
+ enfc 129
+ ipu1 130
+ ipu1_di0 131
+ ipu1_di1 132
+ ipu2 133
+ ipu2_di0 134
+ ldb_di0 135
+ ldb_di1 136
+ ipu2_di1 137
+ hsi_tx 138
+ mlb 139
+ mmdc_ch0_axi 140
+ mmdc_ch1_axi 141
+ ocram 142
+ openvg_axi 143
+ pcie_axi 144
+ pwm1 145
+ pwm2 146
+ pwm3 147
+ pwm4 148
+ per1_bch 149
+ gpmi_bch_apb 150
+ gpmi_bch 151
+ gpmi_io 152
+ gpmi_apb 153
+ sata 154
+ sdma 155
+ spba 156
+ ssi1 157
+ ssi2 158
+ ssi3 159
+ uart_ipg 160
+ uart_serial 161
+ usboh3 162
+ usdhc1 163
+ usdhc2 164
+ usdhc3 165
+ usdhc4 166
+ vdo_axi 167
+ vpu_axi 168
+ cko1 169
+ pll1_sys 170
+ pll2_bus 171
+ pll3_usb_otg 172
+ pll4_audio 173
+ pll5_video 174
+ pll6_mlb 175
+ pll7_usb_host 176
+ pll8_enet 177
+ ssi1_ipg 178
+ ssi2_ipg 179
+ ssi3_ipg 180
+ rom 181
+ usbphy1 182
+ usbphy2 183
+ ldb_di0_div_3_5 184
+ ldb_di1_div_3_5 185
+
+Examples:
+
+clks: ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@02020000 {
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
index 5375625..f1e5dfe 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -39,3 +39,46 @@
#gpio-cells = <4>;
gpio-controller;
};
+
+
+Samsung S3C24XX GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [flags and pull up/down]
+
+ Values for gpio specifier:
+ - Pin number: depending on the controller a number from 0 up to 15.
+ - Mux function: Depending on the SoC and the gpio bank the gpio can be set
+ as input, output or a special function
+ - Flags and Pull Up/Down: the values to use differ for the individual SoCs
+ example S3C2416/S3C2450:
+ 0 - Pull Up/Down Disabled.
+ 1 - Pull Down Enabled.
+ 2 - Pull Up Enabled.
+ Bit 16 (0x00010000) - Input is active low.
+ Consult the user manual for the correct values of Mux and Pull Up/Down.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+ gpa: gpio-controller@56000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,s3c24xx-gpio";
+ reg = <0x56000000 0x10>;
+ #gpio-cells = <3>;
+ gpio-controller;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
index 16695d9..66788fd 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -11,6 +11,11 @@
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
Example:
@@ -20,4 +25,5 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ ti,use-leds;
};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a85f98..2f5322b 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,3 +56,4 @@
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
ti,tsc2003 I2C Touch-Screen Controller
+ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
new file mode 100644
index 0000000..9ceb19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+};
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
new file mode 100644
index 0000000..58354a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
@@ -0,0 +1,102 @@
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+ "jedec,lpddr2-s4"
+
+ "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+
+ "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+
+ "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+
+- density : <u32> representing density in Mb (Mega bits)
+
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+ "lpddr2-timings" provides AC timing parameters of the device for
+ a given speed-bin. The user may provide the timings for as many
+ speed-bins as is required. Please see Documentation/devicetree/
+ bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+
+Example:
+
+elpida_ECB240ABACN : lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+}
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 0000000..938f8e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -0,0 +1,55 @@
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+
+Required properties:
+- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+ is the IP revision of the specific EMIF instance.
+
+- phy-type : <u32> indicating the DDR phy type. Following are the
+ allowed values
+ <1> : Attila PHY
+ <2> : Intelli PHY
+
+- device-handle : phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods : For TI hwmods processing and omap device creation
+ the value shall be "emif<n>" where <n> is the number of the EMIF
+ instance with base 1.
+
+Optional properties:
+- cs1-used : Have this property if CS1 of this EMIF
+ instance has a memory part attached to it. If there is a memory
+ part attached to CS1, it should be the same type as the one on CS0,
+ so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs : Have this property if the board has one
+ calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+ supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+ supports dll calibration control
+
+- hw-caps-ll-interface : Have this property if the controller
+ has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert : Have this property if the controller
+ has capability for generating SDRAM temperature alerts
+
+Example:
+
+emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ device-handle = <&elpida_ECB240ABACN>;
+ cs1-used;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+};
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
new file mode 100644
index 0000000..f1421e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -0,0 +1,31 @@
+PXA3xx NAND DT bindings
+
+Required properties:
+
+ - compatible: Should be "marvell,pxa3xx-nand"
+ - reg: The register base for the controller
+ - interrupts: The interrupt to map
+ - #address-cells: Set to <1> if the node includes partitions
+
+Optional properties:
+
+ - marvell,nand-enable-arbiter: Set to enable the bus arbiter
+ - marvell,nand-keep-config: Set to keep the NAND controller config as set
+ by the bootloader
+ - num-cs: Number of chipselect lines to usw
+
+Example:
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ #address-cells = <1>;
+
+ marvell,nand-enable-arbiter;
+ marvell,nand-keep-config;
+ num-cs = <1>;
+
+ /* partitions (optional) */
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index da80c2a..a2436e1 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -8,7 +8,8 @@
- gpio-controller: mark the device as a GPIO controller
- regulators: list of regulators provided by this controller, must have
property "regulator-compatible" to match their hardware counterparts:
- sm[0-2], ldo[0-9] and ldo_rtc
+ sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
- vin-sm0-supply: The input supply for the SM0.
- vin-sm1-supply: The input supply for the SM1.
- vin-sm2-supply: The input supply for the SM2.
@@ -20,6 +21,9 @@
Each regulator is defined using the standard binding for regulators.
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+ take care of making proper parent child relationship.
+
Example:
pmu: tps6586x@34 {
@@ -30,6 +34,7 @@
#gpio-cells = <2>;
gpio-controller;
+ sys-supply = <&some_reg>;
vin-sm0-supply = <&some_reg>;
vin-sm1-supply = <&some_reg>;
vin-sm2-supply = <&some_reg>;
@@ -43,8 +48,16 @@
#address-cells = <1>;
#size-cells = <0>;
- sm0_reg: regulator@0 {
+ sys_reg: regulator@0 {
reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: regulator@1 {
+ reg = <1>;
regulator-compatible = "sm0";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
@@ -52,8 +65,8 @@
regulator-always-on;
};
- sm1_reg: regulator@1 {
- reg = <1>;
+ sm1_reg: regulator@2 {
+ reg = <2>;
regulator-compatible = "sm1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
@@ -61,8 +74,8 @@
regulator-always-on;
};
- sm2_reg: regulator@2 {
- reg = <2>;
+ sm2_reg: regulator@3 {
+ reg = <3>;
regulator-compatible = "sm2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <4550000>;
@@ -70,72 +83,72 @@
regulator-always-on;
};
- ldo0_reg: regulator@3 {
- reg = <3>;
+ ldo0_reg: regulator@4 {
+ reg = <4>;
regulator-compatible = "ldo0";
regulator-name = "PCIE CLK";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo1_reg: regulator@4 {
- reg = <4>;
+ ldo1_reg: regulator@5 {
+ reg = <5>;
regulator-compatible = "ldo1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo2_reg: regulator@5 {
- reg = <5>;
+ ldo2_reg: regulator@6 {
+ reg = <6>;
regulator-compatible = "ldo2";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
- ldo3_reg: regulator@6 {
- reg = <6>;
+ ldo3_reg: regulator@7 {
+ reg = <7>;
regulator-compatible = "ldo3";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo4_reg: regulator@7 {
- reg = <7>;
+ ldo4_reg: regulator@8 {
+ reg = <8>;
regulator-compatible = "ldo4";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2475000>;
};
- ldo5_reg: regulator@8 {
- reg = <8>;
+ ldo5_reg: regulator@9 {
+ reg = <9>;
regulator-compatible = "ldo5";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo6_reg: regulator@9 {
- reg = <9>;
+ ldo6_reg: regulator@10 {
+ reg = <10>;
regulator-compatible = "ldo6";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo7_reg: regulator@10 {
- reg = <10>;
+ ldo7_reg: regulator@11 {
+ reg = <11>;
regulator-compatible = "ldo7";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo8_reg: regulator@11 {
- reg = <11>;
+ ldo8_reg: regulator@12 {
+ reg = <12>;
regulator-compatible = "ldo8";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
- ldo9_reg: regulator@12 {
- reg = <12>;
+ ldo9_reg: regulator@13 {
+ reg = <13>;
regulator-compatible = "ldo9";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
new file mode 100644
index 0000000..8c6672a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+};
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 615142d..157416e7 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@
* Intel DH89xxCC (PCH)
* Intel Panther Point (PCH)
* Intel Lynx Point (PCH)
+ * Intel Lynx Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/MAINTAINERS b/MAINTAINERS
index bc7dd64..9d3965c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3397,7 +3397,7 @@
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T: git git://git.fluff.org/bjdooks/linux.git
+T: git git://git.pengutronix.de/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
diff --git a/Makefile b/Makefile
index 0f66f14..ae6928c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 171f184..4235503 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,13 +273,12 @@
select ARM_AMBA
select ARCH_HAS_CPUFREQ
select COMMON_CLK
- select CLK_VERSATILE
+ select COMMON_CLK_VERSATILE
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
- select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
@@ -289,13 +288,12 @@
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
@@ -312,7 +310,6 @@
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
- select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
@@ -424,21 +421,19 @@
help
Support for the Cortina Systems Gemini family SoCs
-config ARCH_PRIMA2
- bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
- select CPU_V7
+config ARCH_SIRF
+ bool "CSR SiRF"
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_SIRF
select USE_OF
- select ZONE_DMA
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFprimaII/Marco/Polo platforms
config ARCH_EBSA110
bool "EBSA-110"
@@ -473,7 +468,7 @@
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
- select NEED_MACH_IO_H
+ select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
@@ -530,7 +525,6 @@
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
- select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
@@ -540,7 +534,6 @@
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
- select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -553,7 +546,6 @@
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
- select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@@ -593,7 +585,6 @@
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the Marvell Dove SoC 88AP510
@@ -604,7 +595,6 @@
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Kirkwood series SoCs:
@@ -631,7 +621,6 @@
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell MV78xx0 series SoCs:
@@ -644,7 +633,6 @@
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
- select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
@@ -669,8 +657,9 @@
bool "Micrel/Kendin KS8695"
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -700,7 +689,6 @@
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
- select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
select USE_OF
select COMMON_CLK
@@ -727,14 +715,6 @@
family of Femtocell devices. The picoxcell support requires device tree
for all boards.
-config ARCH_PNX4008
- bool "Philips Nexperia PNX4008 Mobile"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- select ARCH_USES_GETTIMEOFFSET
- help
- This enables support for Philips PNX4008 mobile platform.
-
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
@@ -930,7 +910,6 @@
select PCI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
- select NEED_MACH_IO_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -949,6 +928,7 @@
select COMMON_CLK
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select SPARSE_IRQ
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -1136,6 +1116,8 @@
source "arch/arm/mach-shmobile/Kconfig"
+source "arch/arm/mach-prima2/Kconfig"
+
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f15f82b..e968a52 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -356,15 +356,15 @@
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
- bool "Kernel low-level debug output via semihosting I"
+ bool "Kernel low-level debug output via semihosting I/O"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
- simple SVC calls. The host debugger or emulator must have
+ simple SVC call. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
- This is known to work with OpenOCD, as wellas
+ This is known to work with OpenOCD, as well as
ARM's Fast Models, or any other controlling environment
that implements semihosting.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 17b0d5f..f476182 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,7 +168,6 @@
machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
-machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
@@ -285,10 +284,10 @@
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb:
+%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-dtbs:
+dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b8c64b8..81769c1 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,10 +659,14 @@
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
+ mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
+ bic r6, r6, #1 << 31 @ 32-bit translation system
+ bic r6, r6, #3 << 0 @ use only ttbr0
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
#endif
mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db..c634f87 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,64 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ };
+ };
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9..185d632 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,104 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+ };
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bd0cff3..bb31bff 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,95 +69,146 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x44e07000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <96>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x4804c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <98>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ac000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ae000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <62>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ reg = <0x44e09000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <72>;
+ status = "disabled";
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ reg = <0x48022000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <73>;
+ status = "disabled";
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ reg = <0x48024000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <74>;
+ status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ reg = <0x481a6000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <44>;
+ status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ reg = <0x481a8000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <45>;
+ status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ reg = <0x481aa000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <46>;
+ status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ reg = <0x44e0b000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <70>;
+ status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <71>;
+ status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ reg = <0x4819c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+ status = "disabled";
};
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
+ reg = <0x44e35000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <91>;
};
};
};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index d79b28d..a4ba31b 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -166,9 +166,116 @@
#size-cells = <0>;
autorepeat;
button@21 {
- label = "GPIO Key UP";
+ label = "Interrupt Key";
linux,code = <103>;
gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
};
+ key1 {
+ label = "KEY1";
+ linux,code = <1>;
+ gpios = <&pca9532 0 0>;
+ };
+ key2 {
+ label = "KEY2";
+ linux,code = <2>;
+ gpios = <&pca9532 1 0>;
+ };
+ key3 {
+ label = "KEY3";
+ linux,code = <3>;
+ gpios = <&pca9532 2 0>;
+ };
+ key4 {
+ label = "KEY4";
+ linux,code = <4>;
+ gpios = <&pca9532 3 0>;
+ };
+ joy0 {
+ label = "Joystick Key 0";
+ linux,code = <10>;
+ gpios = <&gpio 2 0 0>; /* P2.0 */
+ };
+ joy1 {
+ label = "Joystick Key 1";
+ linux,code = <11>;
+ gpios = <&gpio 2 1 0>; /* P2.1 */
+ };
+ joy2 {
+ label = "Joystick Key 2";
+ linux,code = <12>;
+ gpios = <&gpio 2 2 0>; /* P2.2 */
+ };
+ joy3 {
+ label = "Joystick Key 3";
+ linux,code = <13>;
+ gpios = <&gpio 2 3 0>; /* P2.3 */
+ };
+ joy4 {
+ label = "Joystick Key 4";
+ linux,code = <14>;
+ gpios = <&gpio 2 4 0>; /* P2.4 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* LEDs on OEM Board */
+
+ led1 {
+ gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio 2 10 1>; /* P2.10, active low */
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio 2 11 1>; /* P2.11, active low */
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio 2 12 1>; /* P2.12, active low */
+ default-state = "off";
+ };
+
+ /* LEDs on Base Board */
+
+ lede1 {
+ gpios = <&pca9532 8 0>;
+ default-state = "off";
+ };
+ lede2 {
+ gpios = <&pca9532 9 0>;
+ default-state = "off";
+ };
+ lede3 {
+ gpios = <&pca9532 10 0>;
+ default-state = "off";
+ };
+ lede4 {
+ gpios = <&pca9532 11 0>;
+ default-state = "off";
+ };
+ lede5 {
+ gpios = <&pca9532 12 0>;
+ default-state = "off";
+ };
+ lede6 {
+ gpios = <&pca9532 13 0>;
+ default-state = "off";
+ };
+ lede7 {
+ gpios = <&pca9532 14 0>;
+ default-state = "off";
+ };
+ lede8 {
+ gpios = <&pca9532 15 0>;
+ default-state = "off";
+ };
};
};
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 0000000..f97f70f8
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index e3486f4..035c13f 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -42,12 +42,13 @@
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 20912b1..384d8b6 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -31,6 +31,22 @@
bus-width = <4>;
status = "okay";
};
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+ 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
};
apbx@80040000 {
@@ -39,6 +55,47 @@
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ auart0: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+ gpio = <&gpio0 17 0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "green";
+ gpios = <&gpio2 1 0>;
+ linux,default-trigger = "default-on";
};
};
};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 757a327f..85c3864 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -36,7 +36,7 @@
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index e613831..3f3b6fc 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -52,6 +52,7 @@
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 0x2000>;
+ clocks = <&clks 15>;
};
ecc@80008000 {
@@ -67,6 +68,7 @@
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 34>;
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -74,6 +76,7 @@
ssp0: ssp@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15 14>;
+ clocks = <&clks 33>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
@@ -140,6 +143,17 @@
fsl,pull-up = <0>;
};
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+ 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -183,7 +197,6 @@
0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
- 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
>;
fsl,drive-strength = <1>;
@@ -280,6 +293,7 @@
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 0x2000>;
+ clocks = <&clks 16>;
};
dcp@80028000 {
@@ -306,12 +320,14 @@
compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
interrupts = <46 45>;
+ clocks = <&clks 38>;
status = "disabled";
};
ssp1: ssp@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2 20>;
+ clocks = <&clks 33>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
@@ -329,9 +345,10 @@
reg = <0x80040000 0x40000>;
ranges;
- clkctl@80040000 {
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
- status = "disabled";
+ #clock-cells = <1>;
};
saif0: saif@80042000 {
@@ -383,6 +400,7 @@
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
+ clocks = <&clks 30>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
@@ -397,6 +415,7 @@
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
+ clocks = <&clks 32>;
status = "disabled";
};
@@ -404,6 +423,7 @@
compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <59 60 58>;
+ clocks = <&clks 32>;
status = "disabled";
};
@@ -411,11 +431,15 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x80070000 0x2000>;
interrupts = <0>;
+ clocks = <&clks 32>, <&clks 16>;
+ clock-names = "uart", "apb_pclk";
status = "disabled";
};
- usbphy@8007c000 {
+ usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
+ clocks = <&clks 41>;
status = "disabled";
};
};
@@ -428,8 +452,12 @@
reg = <0x80080000 0x80000>;
ranges;
- usbctrl@80080000 {
+ usb0: usb@80080000 {
+ compatible = "fsl,imx23-usb", "fsl,imx27-usb";
reg = <0x80080000 0x40000>;
+ interrupts = <11>;
+ fsl,usbphy = <&usbphy0>;
+ clocks = <&clks 40>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index 2b0ff60..af50469 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -23,10 +23,6 @@
soc {
aipi@10000000 { /* aipi */
- wdog@10002000 {
- status = "okay";
- };
-
serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
@@ -49,7 +45,7 @@
i2c@1001d000 {
clock-frequency = <400000>;
status = "okay";
- at24@4c {
+ at24@52 {
compatible = "at,24c32";
pagesize = <32>;
reg = <0x52>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 5303ab6..3e54f14 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -62,7 +62,6 @@
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x4000>;
interrupts = <27>;
- status = "disabled";
};
uart1: serial@1000a000 {
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index b383417..5171667 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -37,7 +37,7 @@
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
new file mode 100644
index 0000000..05c892e
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10049 Board";
+ compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ spi3_pins_cfa10049: spi3-cfa10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+
+ ssp3: ssp@80016000 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins_cfa10049>;
+ status = "okay";
+
+ gpio5: gpio5@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+
+ gpio6: gpio6@1 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <1>;
+ registers-number = <4>;
+ spi-max-frequency = <100000>;
+ };
+
+ };
+ };
+
+ apbx@80040000 {
+ i2c1: i2c@8005a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 773c0e8..a0ad71c 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -46,11 +46,28 @@
wp-gpios = <&gpio0 28 0>;
};
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
@@ -128,6 +145,10 @@
status = "okay";
};
+ lradc@80050000 {
+ status = "okay";
+ };
+
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -140,6 +161,12 @@
VDDIO-supply = <®_3p3v>;
};
+
+ at24@51 {
+ compatible = "at24,24c32";
+ pagesize = <32>;
+ reg = <0x51>;
+ };
};
pwm: pwm@80064000 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 183a3fd..3bab6b0 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -23,6 +23,8 @@
apb@80000000 {
apbh@80000000 {
gpmi-nand@8000c000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
status = "okay";
@@ -61,19 +63,40 @@
&mmc0_cd_cfg
&mmc0_sck_cfg>;
bus-width = <8>;
- wp-gpios = <&gpio3 10 1>;
+ wp-gpios = <&gpio3 10 0>;
+ vmmc-supply = <®_vddio_sd0>;
status = "okay";
};
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+ 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+ 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -129,6 +152,7 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
};
};
+ lradc@80050000 {
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
-
- auart3: serial@80070000 {
- pinctrl-names = "default";
- pinctrl-0 = <&auart3_pins_a>;
- status = "okay";
- };
};
};
ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy0_pins_a>;
+ status = "okay";
+ };
+
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy1_pins_a>;
+ status = "okay";
+ };
+
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio3 11 0>;
status = "okay";
};
@@ -198,6 +241,30 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 12 0>;
+ };
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 13 0>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 62bf767..37be532 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -25,7 +25,7 @@
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
- hog_pins_a: hog-gpios@0 {
+ hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
@@ -34,6 +34,24 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ mac0_pins_gpio: mac0-gpio-mode@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+ 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+ 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+ 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+ 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+ 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+ 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+ 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+ 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
};
@@ -72,8 +90,9 @@
ahb@80080000 {
mac0: ethernet@800f0000 {
phy-mode = "rmii";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio_mode";
pinctrl-0 = <&mac0_pins_a>;
+ pinctrl-1 = <&mac0_pins_gpio>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 3fa6d19..724147e 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -27,6 +27,8 @@
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
};
cpus {
@@ -65,6 +67,7 @@
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 0x2000>;
+ clocks = <&clks 25>;
};
perfmon@80006000 {
@@ -81,34 +84,47 @@
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 50>;
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80010000 0x2000>;
interrupts = <96 82>;
+ clocks = <&clks 46>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80012000 0x2000>;
interrupts = <97 83>;
+ clocks = <&clks 47>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80014000 0x2000>;
interrupts = <98 84>;
+ clocks = <&clks 48>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x80016000 0x2000>;
interrupts = <99 85>;
+ clocks = <&clks 49>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
@@ -410,6 +426,28 @@
fsl,pull-up = <1>;
};
+ i2c0_pins_b: i2c0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+ 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+ 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
saif0_pins_a: saif0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -453,6 +491,16 @@
fsl,pull-up = <0>;
};
+ pwm4_pins_a: pwm4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -507,6 +555,49 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+ 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+ 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+ 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ usbphy0_pins_a: usbphy0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ usbphy0_pins_b: usbphy0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ usbphy1_pins_a: usbphy1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
digctl@8001c000 {
@@ -523,6 +614,7 @@
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 0x2000>;
+ clocks = <&clks 26>;
};
dcp@80028000 {
@@ -551,6 +643,7 @@
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 0x2000>;
interrupts = <38 86>;
+ clocks = <&clks 55>;
status = "disabled";
};
@@ -558,6 +651,8 @@
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80032000 0x2000>;
interrupts = <8>;
+ clocks = <&clks 58>, <&clks 58>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -565,6 +660,8 @@
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80034000 0x2000>;
interrupts = <9>;
+ clocks = <&clks 59>, <&clks 59>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -611,15 +708,17 @@
reg = <0x80040000 0x40000>;
ranges;
- clkctl@80040000 {
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
- status = "disabled";
+ #clock-cells = <1>;
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
+ clocks = <&clks 53>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
@@ -633,12 +732,16 @@
compatible = "fsl,imx28-saif";
reg = <0x80046000 0x2000>;
interrupts = <58 81>;
+ clocks = <&clks 54>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
+ compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
+ interrupts = <10 14 15 16 17 18 19
+ 20 21 22 23 24 25>;
status = "disabled";
};
@@ -677,6 +780,7 @@
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 0x2000>;
+ clocks = <&clks 44>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
@@ -691,6 +795,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ clocks = <&clks 45>;
status = "disabled";
};
@@ -698,6 +803,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
+ clocks = <&clks 45>;
status = "disabled";
};
@@ -705,6 +811,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
+ clocks = <&clks 45>;
status = "disabled";
};
@@ -712,6 +819,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
+ clocks = <&clks 45>;
status = "disabled";
};
@@ -719,6 +827,7 @@
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
+ clocks = <&clks 45>;
status = "disabled";
};
@@ -726,18 +835,22 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x80074000 0x1000>;
interrupts = <47>;
+ clocks = <&clks 45>, <&clks 26>;
+ clock-names = "uart", "apb_pclk";
status = "disabled";
};
usbphy0: usbphy@8007c000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007c000 0x2000>;
+ clocks = <&clks 62>;
status = "disabled";
};
usbphy1: usbphy@8007e000 {
compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
reg = <0x8007e000 0x2000>;
+ clocks = <&clks 63>;
status = "disabled";
};
};
@@ -754,6 +867,7 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
interrupts = <93>;
+ clocks = <&clks 60>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -762,6 +876,7 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
interrupts = <92>;
+ clocks = <&clks 61>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
@@ -775,6 +890,8 @@
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
@@ -782,6 +899,8 @@
compatible = "fsl,imx28-fec";
reg = <0x800f4000 0x4000>;
interrupts = <102>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 59d9789..cbd2b1c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,23 +25,31 @@
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
uart3: serial@7000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@70010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
@@ -169,31 +177,43 @@
};
};
- wdog@73f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@73fa8000 {
- compatible = "fsl,imx51-iomuxc-babbage";
- reg = <0x73fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
+ 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
+ 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
+ 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
+ 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
+ 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+ 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+ >;
+ };
+ };
};
uart1: serial@73fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
fsl,uart-has-rtscts;
status = "okay";
};
uart2: serial@73fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@80000000 { /* aips-2 */
- sdma@83fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
- };
-
i2c@83fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
};
audmux@83fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@83fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "mii";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index aba28dc..2f71a91 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -130,6 +130,34 @@
};
};
+ usb@73f80000 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@73f80200 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@73f80400 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@73f80600 {
+ compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+ reg = <0x73f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f84000 0x4000>;
@@ -174,7 +202,6 @@
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@73f9c000 { /* WDOG2 */
@@ -184,6 +211,122 @@
status = "disabled";
};
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc";
+ reg = <0x73fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+ 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+ 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+ 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */
+ 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+ 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+ 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+ 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */
+ 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */
+ 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */
+ 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+ 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+ 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+ 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+ 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */
+ 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+ 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+ 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+ 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+ 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+ 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */
+ 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */
+ 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+ 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+ 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+ 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */
+ 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */
+ 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+ 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+ 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+ 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */
+ 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */
+ 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */
+ 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */
+ 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */
+ 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */
+ 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */
+ 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */
+ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
@@ -219,6 +362,7 @@
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
cspi@83fc0000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index da895e9..4be76f22 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -25,31 +25,66 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-ard";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
+ 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
+ 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
+ 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
+ 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+ 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+ 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+ 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+ 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+ 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+ 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+ 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+ 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+ 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+ 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+ 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+ 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+ 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+ 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+ 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+ 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+ 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+ 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+ 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+ 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+ 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+ 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+ 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+ 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+ 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+ 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+ 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+ 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+ 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
};
-
- aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
- };
};
eim-cs1@f4000000 {
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 9c79803..a124d1e 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -25,12 +25,16 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -56,32 +60,45 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-evk";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
pmic: mc13892@08 {
@@ -96,6 +113,8 @@
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 2d803a9..08948af 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -25,6 +25,8 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
@@ -35,32 +37,46 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-qsb";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+ 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
};
audmux@63fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 0809102..06c6858 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -25,22 +25,30 @@
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
esdhc@50008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
non-removable;
status = "okay";
};
uart3: serial@5000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -72,35 +80,49 @@
};
esdhc@50020000 { /* ESDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
non-removable;
status = "okay";
};
};
- wdog@53f98000 { /* WDOG1 */
- status = "okay";
- };
-
iomuxc@53fa8000 {
- compatible = "fsl,imx53-iomuxc-smd";
- reg = <0x53fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+ 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+ 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+ 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+ 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ >;
+ };
+ };
};
uart1: serial@53fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
uart2: serial@53fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@60000000 { /* AIPS2 */
- sdma@63fb0000 {
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
- };
-
i2c@63fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
};
i2c@63fc8000 { /* I2C1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
};
ethernet@63fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd37165..221cf33 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -135,6 +135,34 @@
};
};
+ usb@53f80000 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ usb@53f80200 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ usb@53f80400 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ usb@53f80600 {
+ compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
@@ -179,7 +207,6 @@
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- status = "disabled";
};
wdog@53f9c000 { /* WDOG2 */
@@ -189,6 +216,161 @@
status = "disabled";
};
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+ 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+ 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+ 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
+ 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
+ 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+ 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+ 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+ 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+ 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+ 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+ 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+ 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+ 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
+ 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+
+ pinctrl_esdhc1_2: esdhc1grp-2 {
+ fsl,pins = <
+ 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+ 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+ 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+ 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+ 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+ 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+ 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+ 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+ 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+ 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+ 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+ 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+ 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+ 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+ >;
+ };
+ };
+
+ esdhc3 {
+ pinctrl_esdhc3_1: esdhc3grp-1 {
+ fsl,pins = <
+ 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+ 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+ 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+ 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+ 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+ 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+ 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+ 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+ 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+ 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+ 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
+ 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+ 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+ >;
+ };
+
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+ 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+ 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+ 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+ 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
+ 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
@@ -203,6 +385,20 @@
status = "disabled";
};
+ can1: can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ status = "disabled";
+ };
+
+ can2: can@53fcc000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <83>;
+ status = "disabled";
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
@@ -277,6 +473,7 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi@63fc0000 {
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d792581..15df4c1 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -28,8 +28,27 @@
status = "disabled"; /* gpmi nand conflicts with SD */
};
+ aips-bus@02000000 { /* AIPS1 */
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+ >;
+ };
+ };
+ };
+ };
+
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
phy-mode = "rgmii";
status = "okay";
};
@@ -52,6 +71,8 @@
};
uart4: serial@021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 72f30f3..d152328 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -46,15 +46,20 @@
iomuxc@020e0000 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_hog>;
+ pinctrl-0 = <&pinctrl_hog>;
- gpios {
- pinctrl_gpio_hog: gpiohog {
+ hog {
+ pinctrl_hog: hoggrp {
fsl,pins = <
- 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
- 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
- 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
- >;
+ 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+ 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+ 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+ 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+ 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+ >;
};
};
};
@@ -63,6 +68,9 @@
aips-bus@02100000 { /* AIPS2 */
usb@02184000 { /* USB OTG */
vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
status = "okay";
};
@@ -71,12 +79,16 @@
};
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
vmmc-supply = <®_3p3v>;
@@ -84,6 +96,8 @@
};
usdhc@0219c000 { /* uSDHC4 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_2>;
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
vmmc-supply = <®_3p3v>;
@@ -99,7 +113,7 @@
uart2: serial@021e8000 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2_1>;
+ pinctrl-0 = <&pinctrl_uart2_1>;
};
i2c@021a0000 { /* I2C1 */
@@ -111,6 +125,7 @@
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ clocks = <&clks 169>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 07509a1..e596c28c 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -22,28 +22,51 @@
};
soc {
-
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
uart1: serial@02020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
};
+
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+ 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+ >;
+ };
+ };
+ };
};
aips-bus@02100000 { /* AIPS2 */
ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
status = "okay";
};
usdhc@02194000 { /* uSDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_1>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
status = "okay";
};
usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index fd57079..35e5895 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -97,18 +97,23 @@
dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
+ clocks = <&clks 106>;
};
gpmi-nand@00112000 {
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
- fsl,gpmi-dma-channel = <0>;
- status = "disabled";
+ compatible = "fsl,imx6q-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <0 13 0x04>, <0 15 0x04>;
+ interrupt-names = "gpmi-dma", "bch";
+ clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+ <&clks 150>, <&clks 149>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ fsl,gpmi-dma-channel = <0>;
+ status = "disabled";
};
timer@00a00600 {
@@ -150,6 +155,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 0x04>;
+ clocks = <&clks 112>, <&clks 112>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -159,6 +166,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 0x04>;
+ clocks = <&clks 113>, <&clks 113>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -168,6 +177,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 0x04>;
+ clocks = <&clks 114>, <&clks 114>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -177,6 +188,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 0x04>;
+ clocks = <&clks 115>, <&clks 115>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -186,6 +199,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
+ clocks = <&clks 116>, <&clks 116>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -193,6 +208,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -205,6 +222,7 @@
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
+ clocks = <&clks 178>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
@@ -214,6 +232,7 @@
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
+ clocks = <&clks 179>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
@@ -223,6 +242,7 @@
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
+ clocks = <&clks 180>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
@@ -362,20 +382,22 @@
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
- status = "disabled";
+ clocks = <&clks 0>;
};
wdog@020c0000 { /* WDOG2 */
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
+ clocks = <&clks 0>;
status = "disabled";
};
- ccm@020c4000 {
+ clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
};
anatop@020c8000 {
@@ -472,12 +494,14 @@
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 0x04>;
+ clocks = <&clks 182>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 0x04>;
+ clocks = <&clks 183>;
};
snvs@020cc000 {
@@ -514,86 +538,207 @@
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
- fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
- 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
- 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
- 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
- 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
- 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
- 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
- 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
- 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
- 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
- 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
- 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
- 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
- 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
- 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
- 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
- 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
- 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
- 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
- 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
- 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
- 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
- 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
- };
- };
-
- serial2 {
- pinctrl_serial2_1: serial2grp-1 {
- fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
- 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
- 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
- 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
- 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
- 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
- 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
- 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
- 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
- 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
- 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
- };
- };
-
- usdhc4 {
- pinctrl_usdhc4_1: usdhc4grp-1 {
- fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
- 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
- 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
- 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
- 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
- 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
- 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
- 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
- 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
- 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ fsl,pins = <
+ 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+ 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ >;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
- 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
- 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ fsl,pins = <
+ 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+ 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+ 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+ 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+ 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
+ };
+
+ pinctrl_enet_2: enetgrp-2 {
+ fsl,pins = <
+ 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+ 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */
+ 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+ 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+ 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+ 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+ 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+ 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+ 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+ 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+ 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+ 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+ 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+ 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ >;
+ };
+ };
+
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <
+ 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+ 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+ 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+ 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+ 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+ 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+ 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+ 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+ 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+ 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+ 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+ 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+ 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+ 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+ 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+ 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+ 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+ 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+ 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+ 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+ 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
+ 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ >;
+ };
+ };
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */
+ 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+ >;
+ };
+ };
+
+ usbotg {
+ pinctrl_usbotg_1: usbotggrp-1 {
+ fsl,pins = <
+ 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+ 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+ 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+ 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+ 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+ 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+ 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+ 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+ 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+ 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+ 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ >;
+ };
+
+ pinctrl_usdhc3_2: usdhc3grp-2 {
+ fsl,pins = <
+ 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ >;
+ };
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ >;
+ };
+
+ pinctrl_usdhc4_2: usdhc4grp-2 {
+ fsl,pins = <
+ 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ >;
};
};
};
@@ -612,6 +757,9 @@
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
+ clocks = <&clks 155>, <&clks 155>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
};
};
@@ -635,7 +783,9 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
+ clocks = <&clks 162>;
fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -643,7 +793,9 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
+ clocks = <&clks 162>;
fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
@@ -651,6 +803,8 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -658,13 +812,24 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
+ clocks = <&clks 162>;
+ fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks 162>;
+ };
+
ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
+ clocks = <&clks 117>, <&clks 117>;
+ clock-names = "ipg", "ahb";
status = "disabled";
};
@@ -677,6 +842,8 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
+ clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -684,6 +851,8 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
+ clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -691,6 +860,8 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
+ clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -698,6 +869,8 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
+ clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -707,6 +880,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
+ clocks = <&clks 125>;
status = "disabled";
};
@@ -716,6 +890,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
+ clocks = <&clks 126>;
status = "disabled";
};
@@ -725,6 +900,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
+ clocks = <&clks 127>;
status = "disabled";
};
@@ -788,6 +964,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -795,6 +973,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -802,6 +982,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -809,6 +991,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
+ clocks = <&clks 160>, <&clks 161>;
+ clock-names = "ipg", "per";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 80f74e2..0514fb4 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -26,6 +26,11 @@
interrupt-parent = <&intc>;
ranges;
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
+
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 45bc4bb..31f2157 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -7,7 +7,7 @@
compatible = "qcom,msm8660-surf", "qcom,msm8660";
interrupt-parent = <&intc>;
- intc: interrupt-controller@02080000 {
+ intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
@@ -15,6 +15,23 @@
< 0x02081000 0x1000 >;
};
+ timer@2000004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 1 0x301>;
+ reg = <0x02000004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ timer@2000024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 0 0x301>;
+ reg = <0x02000024 0x10>,
+ <0x02000034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x40000>;
+ };
+
serial@19c400000 {
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
new file mode 100644
index 0000000..9e621b5
--- /dev/null
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -0,0 +1,41 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8960 CDP";
+ compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a004 {
+ compatible = "qcom,msm-gpt", "qcom,msm-timer";
+ interrupts = <1 2 0x301>;
+ reg = <0x0200a004 0x10>;
+ clock-frequency = <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ timer@200a024 {
+ compatible = "qcom,msm-dgt", "qcom,msm-timer";
+ interrupts = <1 1 0x301>;
+ reg = <0x0200a024 0x10>,
+ <0x0200a034 0x4>;
+ clock-frequency = <6750000>;
+ cpu-offset = <0x80000>;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 25b50b7..77b84e1 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -7,7 +7,7 @@
*/
/dts-v1/;
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
/ {
model = "TI OMAP2420 H4 board";
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
new file mode 100644
index 0000000..bfd76b4
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2420", "ti,omap2";
+
+ ocp {
+ omap2420_pmx: pinmux@48000030 {
+ compatible = "ti,omap2420-padconf", "pinctrl-single";
+ reg = <0x48000030 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp2";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
new file mode 100644
index 0000000..4565d97
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2";
+
+ ocp {
+ omap2430_pmx: pinmux@49002030 {
+ compatible = "ti,omap2430-padconf", "pinctrl-single";
+ reg = <0x49002030 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <64>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>, /* RX interrupt */
+ <61>; /* RX overflow interrupt */
+ interrupt-names = "common", "tx", "rx", "rx_overflow";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@4808c000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808c000 0xff>;
+ reg-names = "mpu";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@4808e000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808e000 0xff>;
+ reg-names = "mpu";
+ interrupts = <18>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <19>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
new file mode 100644
index 0000000..c38cf76
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap36xx.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard xM";
+ compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ };
+
+ heartbeat {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
deleted file mode 100644
index cdcb98c..0000000
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
- model = "TI OMAP3 BeagleBoard";
- compatible = "ti,omap3-beagle", "ti,omap3";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x20000000>; /* 512 MB */
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
- interrupt-parent = <&intc>;
-
- vsim: regulator@10 {
- compatible = "ti,twl4030-vsim";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-};
-
-/include/ "twl4030.dtsi"
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9..e8ba1c2 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -17,6 +17,15 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
};
&i2c1 {
@@ -46,3 +55,7 @@
reg = <0x5c>;
};
};
+
+&twl_gpio {
+ ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
new file mode 100644
index 0000000..89808ce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ overo {
+ label = "overo:blue:COM";
+ gpios = <&twl_gpio 19 0>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+ status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+ bus-width = <4>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
new file mode 100644
index 0000000..a13d12d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+ model = "TI OMAP3 Gumstix Overo on Tobi";
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8109471..f38ea87 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -17,7 +17,6 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
- serial3 = &uart4;
};
cpus {
@@ -69,6 +68,24 @@
reg = <0x48200000 0x1000>;
};
+ omap3_pmx_core: pinmux@48002030 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002030 0x05cc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap3_pmx_wkup: pinmux@0x48002a58 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002a58 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
clock-frequency = <48000000>;
};
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
-
i2c1: i2c@48070000 {
compatible = "ti,omap3-i2c";
#address-cells = <1>;
@@ -220,5 +231,74 @@
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@49022000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49022000 0xff>,
+ <0x49028000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>, /* RX interrupt */
+ <4>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <1280>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@49024000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49024000 0xff>,
+ <0x4902a000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <22>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>, /* RX interrupt */
+ <5>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@49026000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49026000 0xff>;
+ reg-names = "mpu";
+ interrupts = <23>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <27>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
new file mode 100644
index 0000000..96bf028
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ ocp {
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9880c12..20b966e 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
@@ -126,3 +127,13 @@
ti,non-removable;
bus-width = <4>;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 72216e9..94a23b3 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- vdd_eth: fixedregulator@0 {
+ vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
regulator-boot-on;
};
- vbat: fixedregulator@2 {
+ vbat: fixedregulator-vbat {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
@@ -115,6 +116,33 @@
};
};
+&omap4_pmx_core {
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+ 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
+ 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+ 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+ 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+ 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+ 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
+ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ >;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
@@ -226,3 +254,98 @@
bus-width = <4>;
ti,non-removable;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00000012 /* KEY_E */
+ 0x00010013 /* KEY_R */
+ 0x00020014 /* KEY_T */
+ 0x00030066 /* KEY_HOME */
+ 0x0004003f /* KEY_F5 */
+ 0x000500f0 /* KEY_UNKNOWN */
+ 0x00060017 /* KEY_I */
+ 0x0007002a /* KEY_LEFTSHIFT */
+ 0x01000020 /* KEY_D*/
+ 0x01010021 /* KEY_F */
+ 0x01020022 /* KEY_G */
+ 0x010300e7 /* KEY_SEND */
+ 0x01040040 /* KEY_F6 */
+ 0x010500f0 /* KEY_UNKNOWN */
+ 0x01060025 /* KEY_K */
+ 0x0107001c /* KEY_ENTER */
+ 0x0200002d /* KEY_X */
+ 0x0201002e /* KEY_C */
+ 0x0202002f /* KEY_V */
+ 0x0203006b /* KEY_END */
+ 0x02040041 /* KEY_F7 */
+ 0x020500f0 /* KEY_UNKNOWN */
+ 0x02060034 /* KEY_DOT */
+ 0x0207003a /* KEY_CAPSLOCK */
+ 0x0300002c /* KEY_Z */
+ 0x0301004e /* KEY_KPLUS */
+ 0x03020030 /* KEY_B */
+ 0x0303003b /* KEY_F1 */
+ 0x03040042 /* KEY_F8 */
+ 0x030500f0 /* KEY_UNKNOWN */
+ 0x03060018 /* KEY_O */
+ 0x03070039 /* KEY_SPACE */
+ 0x04000011 /* KEY_W */
+ 0x04010015 /* KEY_Y */
+ 0x04020016 /* KEY_U */
+ 0x0403003c /* KEY_F2 */
+ 0x04040073 /* KEY_VOLUMEUP */
+ 0x040500f0 /* KEY_UNKNOWN */
+ 0x04060026 /* KEY_L */
+ 0x04070069 /* KEY_LEFT */
+ 0x0500001f /* KEY_S */
+ 0x05010023 /* KEY_H */
+ 0x05020024 /* KEY_J */
+ 0x0503003d /* KEY_F3 */
+ 0x05040043 /* KEY_F9 */
+ 0x05050072 /* KEY_VOLUMEDOWN */
+ 0x05060032 /* KEY_M */
+ 0x0507006a /* KEY_RIGHT */
+ 0x06000010 /* KEY_Q */
+ 0x0601001e /* KEY_A */
+ 0x06020031 /* KEY_N */
+ 0x0603009e /* KEY_BACK */
+ 0x0604000e /* KEY_BACKSPACE */
+ 0x060500f0 /* KEY_UNKNOWN */
+ 0x06060019 /* KEY_P */
+ 0x06070067 /* KEY_UP */
+ 0x07000094 /* KEY_PROG1 */
+ 0x07010095 /* KEY_PROG2 */
+ 0x070200ca /* KEY_PROG3 */
+ 0x070300cb /* KEY_PROG4 */
+ 0x0704003e /* KEY_F4 */
+ 0x070500f0 /* KEY_UNKNOWN */
+ 0x07060160 /* KEY_OK */
+ 0x0707006c>; /* KEY_DOWN */
+ linux,input-no-autorepeat;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb..5d1c484 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -30,12 +30,35 @@
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
};
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+
+ L2: l2-cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@0x48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
- *
- * MPU -+-- MPU_PRIVATE - GIC, L2
- * |
- * +----------------+----------+
- * | | |
- * + +- EMIF - DDR |
- * | | |
- * | + +--------+
- * | | |
- * | +- L4_ABE - AESS, MCBSP, TIMERs...
- * | |
- * +- L3_MAIN --+- L4_CORE - IPs...
- * |
- * +- L4_PER - IPs...
- * |
- * +- L4_CFG -+- L4_WKUP - IPs...
- * | |
- * | +- IPs...
- * +- IPU ----+
- * | |
- * +- DSP ----+
- * | |
- * +- DSS ----+
- *
* Since that will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
@@ -96,16 +95,27 @@
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- gic: interrupt-controller@48241000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x48241000 0x1000>,
- <0x48240100 0x0100>;
+ omap4_pmx_core: pinmux@4a100040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ omap4_pmx_wkup: pinmux@4a31e040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a31e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4a310000 0x200>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -115,6 +125,8 @@
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48055000 0x200>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -124,6 +136,8 @@
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48057000 0x200>;
+ interrupts = <0 31 0x4>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -133,6 +147,8 @@
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48059000 0x200>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -142,6 +158,8 @@
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805b000 0x200>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -151,6 +169,8 @@
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805d000 0x200>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -160,30 +180,40 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48070000 0x100>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48072000 0x100>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48060000 0x100>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48350000 0x100>;
+ interrupts = <0 62 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x48098000 0x200>;
+ interrupts = <0 65 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x4809a000 0x200>;
+ interrupts = <0 66 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480b8000 0x200>;
+ interrupts = <0 91 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ interrupts = <0 83 0x4>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -251,30 +297,40 @@
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480b4000 0x400>;
+ interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480ad000 0x400>;
+ interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d1000 0x400>;
+ interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d5000 0x400>;
+ interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x4a314000 0x80>;
+ interrupts = <0 80 0x4>;
ti,hwmods = "wd_timer2";
};
@@ -282,6 +338,7 @@
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
@@ -291,9 +348,87 @@
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@48096000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x48096000 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ interrupts = <0 16 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ keypad: keypad@4a31c000 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x4a31c000 0x80>;
+ interrupts = <0 120 0x4>;
+ reg-names = "mpu";
+ ti,hwmods = "kbd";
+ };
+
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4c000000 0x100>;
+ interrupts = <0 110 0x4>;
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@4d000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4d000000 0x100>;
+ interrupts = <0 111 0x4>;
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39a..9c41a3f 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -17,4 +17,68 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ /* Pressure Sensor */
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /* Temperature Sensor */
+ tmp102@48{
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ };
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x02020073 /* VOLUP */
+ 0x02030072 /* VOLDOWM */
+ 0x020400e7 /* SEND */
+ 0x02050066 /* HOME */
+ 0x0206006b /* END */
+ 0x020700d9>; /* SEARCH */
+ linux,input-no-autorepeat;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 57e5270..9ac75b3 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -145,6 +145,41 @@
#interrupt-cells = <1>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@4807A000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
+
+ i2c5: i2c@4807C000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c5";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
@@ -180,5 +215,97 @@
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ };
+
+ mmc4: mmc@480d1000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc4";
+ ti,needs-special-reset;
+ };
+
+ mmc5: mmc@480d5000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc5";
+ ti,needs-special-reset;
+ };
+
+ keypad: keypad@4ae1c000 {
+ compatible = "ti,omap4-keypad";
+ ti,hwmods = "kbd";
+ };
+
+ mcpdm: mcpdm@40132000 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x40132000 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 112 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "mcpdm";
+ };
+
+ dmic: dmic@4012e000 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x4012e000 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 114 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "dmic";
+ };
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
};
};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 802ec5b..a7ad85e 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -135,13 +135,11 @@
ssp0: ssp@20084000 {
#address-cells = <1>;
#size-cells = <0>;
- pl022,num-chipselects = <1>;
+ num-cs = <1>;
cs-gpios = <&gpio 3 5 0>;
eeprom: at25@0 {
- pl022,hierarchy = <0>;
pl022,interface = <0>;
- pl022,slave-tx-disable = <0>;
pl022,com-mode = <0>;
pl022,rx-level-trig = <1>;
pl022,tx-level-trig = <1>;
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
deleted file mode 100644
index 34ae3a6..0000000
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ /dev/null
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
- model = "SiRF Prima2 eVB";
- compatible = "sirf,prima2-cb", "sirf,prima2";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- chosen {
- bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
- linux,stdout-path = &uart1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <32768>;
- i-cache-size = <32768>;
- /* from bootloader */
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- axi {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x40000000 0x40000000 0x80000000>;
-
- l2-cache-controller@80040000 {
- compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
- reg = <0x80040000 0x1000>;
- interrupts = <59>;
- arm,tag-latency = <1 1 1>;
- arm,data-latency = <1 1 1>;
- arm,filter-ranges = <0 0x40000000>;
- };
-
- intc: interrupt-controller@80020000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "sirf,prima2-intc";
- reg = <0x80020000 0x1000>;
- };
-
- sys-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x88000000 0x88000000 0x40000>;
-
- clock-controller@88000000 {
- compatible = "sirf,prima2-clkc";
- reg = <0x88000000 0x1000>;
- interrupts = <3>;
- };
-
- reset-controller@88010000 {
- compatible = "sirf,prima2-rstc";
- reg = <0x88010000 0x1000>;
- };
-
- rsc-controller@88020000 {
- compatible = "sirf,prima2-rsc";
- reg = <0x88020000 0x1000>;
- };
- };
-
- mem-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x90000000 0x90000000 0x10000>;
-
- memory-controller@90000000 {
- compatible = "sirf,prima2-memc";
- reg = <0x90000000 0x10000>;
- interrupts = <27>;
- };
- };
-
- disp-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x90010000 0x90010000 0x30000>;
-
- display@90010000 {
- compatible = "sirf,prima2-lcd";
- reg = <0x90010000 0x20000>;
- interrupts = <30>;
- };
-
- vpp@90020000 {
- compatible = "sirf,prima2-vpp";
- reg = <0x90020000 0x10000>;
- interrupts = <31>;
- };
- };
-
- graphics-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x98000000 0x98000000 0x8000000>;
-
- graphics@98000000 {
- compatible = "powervr,sgx531";
- reg = <0x98000000 0x8000000>;
- interrupts = <6>;
- };
- };
-
- multimedia-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xa0000000 0xa0000000 0x8000000>;
-
- multimedia@a0000000 {
- compatible = "sirf,prima2-video-codec";
- reg = <0xa0000000 0x8000000>;
- interrupts = <5>;
- };
- };
-
- dsp-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xa8000000 0xa8000000 0x2000000>;
-
- dspif@a8000000 {
- compatible = "sirf,prima2-dspif";
- reg = <0xa8000000 0x10000>;
- interrupts = <9>;
- };
-
- gps@a8010000 {
- compatible = "sirf,prima2-gps";
- reg = <0xa8010000 0x10000>;
- interrupts = <7>;
- };
-
- dsp@a9000000 {
- compatible = "sirf,prima2-dsp";
- reg = <0xa9000000 0x1000000>;
- interrupts = <8>;
- };
- };
-
- peri-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xb0000000 0xb0000000 0x180000>;
-
- timer@b0020000 {
- compatible = "sirf,prima2-tick";
- reg = <0xb0020000 0x1000>;
- interrupts = <0>;
- };
-
- nand@b0030000 {
- compatible = "sirf,prima2-nand";
- reg = <0xb0030000 0x10000>;
- interrupts = <41>;
- };
-
- audio@b0040000 {
- compatible = "sirf,prima2-audio";
- reg = <0xb0040000 0x10000>;
- interrupts = <35>;
- };
-
- uart0: uart@b0050000 {
- cell-index = <0>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0050000 0x10000>;
- interrupts = <17>;
- };
-
- uart1: uart@b0060000 {
- cell-index = <1>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0060000 0x10000>;
- interrupts = <18>;
- };
-
- uart2: uart@b0070000 {
- cell-index = <2>;
- compatible = "sirf,prima2-uart";
- reg = <0xb0070000 0x10000>;
- interrupts = <19>;
- };
-
- usp0: usp@b0080000 {
- cell-index = <0>;
- compatible = "sirf,prima2-usp";
- reg = <0xb0080000 0x10000>;
- interrupts = <20>;
- };
-
- usp1: usp@b0090000 {
- cell-index = <1>;
- compatible = "sirf,prima2-usp";
- reg = <0xb0090000 0x10000>;
- interrupts = <21>;
- };
-
- usp2: usp@b00a0000 {
- cell-index = <2>;
- compatible = "sirf,prima2-usp";
- reg = <0xb00a0000 0x10000>;
- interrupts = <22>;
- };
-
- dmac0: dma-controller@b00b0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-dmac";
- reg = <0xb00b0000 0x10000>;
- interrupts = <12>;
- };
-
- dmac1: dma-controller@b0160000 {
- cell-index = <1>;
- compatible = "sirf,prima2-dmac";
- reg = <0xb0160000 0x10000>;
- interrupts = <13>;
- };
-
- vip@b00C0000 {
- compatible = "sirf,prima2-vip";
- reg = <0xb00C0000 0x10000>;
- };
-
- spi0: spi@b00d0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-spi";
- reg = <0xb00d0000 0x10000>;
- interrupts = <15>;
- };
-
- spi1: spi@b0170000 {
- cell-index = <1>;
- compatible = "sirf,prima2-spi";
- reg = <0xb0170000 0x10000>;
- interrupts = <16>;
- };
-
- i2c0: i2c@b00e0000 {
- cell-index = <0>;
- compatible = "sirf,prima2-i2c";
- reg = <0xb00e0000 0x10000>;
- interrupts = <24>;
- };
-
- i2c1: i2c@b00f0000 {
- cell-index = <1>;
- compatible = "sirf,prima2-i2c";
- reg = <0xb00f0000 0x10000>;
- interrupts = <25>;
- };
-
- tsc@b0110000 {
- compatible = "sirf,prima2-tsc";
- reg = <0xb0110000 0x10000>;
- interrupts = <33>;
- };
-
- gpio: gpio-controller@b0120000 {
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- compatible = "sirf,prima2-gpio-pinmux";
- reg = <0xb0120000 0x10000>;
- gpio-controller;
- interrupt-controller;
- };
-
- pwm@b0130000 {
- compatible = "sirf,prima2-pwm";
- reg = <0xb0130000 0x10000>;
- };
-
- efusesys@b0140000 {
- compatible = "sirf,prima2-efuse";
- reg = <0xb0140000 0x10000>;
- };
-
- pulsec@b0150000 {
- compatible = "sirf,prima2-pulsec";
- reg = <0xb0150000 0x10000>;
- interrupts = <48>;
- };
-
- pci-iobg {
- compatible = "sirf,prima2-pciiobg", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x56000000 0x56000000 0x1b00000>;
-
- sd0: sdhci@56000000 {
- cell-index = <0>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56000000 0x100000>;
- interrupts = <38>;
- };
-
- sd1: sdhci@56100000 {
- cell-index = <1>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56100000 0x100000>;
- interrupts = <38>;
- };
-
- sd2: sdhci@56200000 {
- cell-index = <2>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56200000 0x100000>;
- interrupts = <23>;
- };
-
- sd3: sdhci@56300000 {
- cell-index = <3>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56300000 0x100000>;
- interrupts = <23>;
- };
-
- sd4: sdhci@56400000 {
- cell-index = <4>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56400000 0x100000>;
- interrupts = <39>;
- };
-
- sd5: sdhci@56500000 {
- cell-index = <5>;
- compatible = "sirf,prima2-sdhc";
- reg = <0x56500000 0x100000>;
- interrupts = <39>;
- };
-
- pci-copy@57900000 {
- compatible = "sirf,prima2-pcicp";
- reg = <0x57900000 0x100000>;
- interrupts = <40>;
- };
-
- rom-interface@57a00000 {
- compatible = "sirf,prima2-romif";
- reg = <0x57a00000 0x100000>;
- };
- };
- };
-
- rtc-iobg {
- compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x80030000 0x10000>;
-
- gpsrtc@1000 {
- compatible = "sirf,prima2-gpsrtc";
- reg = <0x1000 0x1000>;
- interrupts = <55 56 57>;
- };
-
- sysrtc@2000 {
- compatible = "sirf,prima2-sysrtc";
- reg = <0x2000 0x1000>;
- interrupts = <52 53 54>;
- };
-
- pwrc@3000 {
- compatible = "sirf,prima2-pwrc";
- reg = <0x3000 0x1000>;
- interrupts = <32>;
- };
- };
-
- uus-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xb8000000 0xb8000000 0x40000>;
-
- usb0: usb@b00e0000 {
- compatible = "chipidea,ci13611a-prima2";
- reg = <0xb8000000 0x10000>;
- interrupts = <10>;
- };
-
- usb1: usb@b00f0000 {
- compatible = "chipidea,ci13611a-prima2";
- reg = <0xb8010000 0x10000>;
- interrupts = <11>;
- };
-
- sata@b00f0000 {
- compatible = "synopsys,dwc-ahsata";
- reg = <0xb8020000 0x10000>;
- interrupts = <37>;
- };
-
- security@b00f0000 {
- compatible = "sirf,prima2-security";
- reg = <0xb8030000 0x10000>;
- interrupts = <42>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
new file mode 100644
index 0000000..57286b4
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+ model = "CSR SiRFprimaII Evaluation Board";
+ compatible = "sirf,prima2", "sirf,prima2-cb";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ axi {
+ peri-iobg {
+ uart@b0060000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ };
+ spi@b00d0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ };
+ spi@b0170000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
new file mode 100644
index 0000000..055fca5
--- /dev/null
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -0,0 +1,640 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+ compatible = "sirf,prima2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ /* from bootloader */
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x40000000 0x40000000 0x80000000>;
+
+ l2-cache-controller@80040000 {
+ compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+ reg = <0x80040000 0x1000>;
+ interrupts = <59>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
+ arm,filter-ranges = <0 0x40000000>;
+ };
+
+ intc: interrupt-controller@80020000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "sirf,prima2-intc";
+ reg = <0x80020000 0x1000>;
+ };
+
+ sys-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x88000000 0x88000000 0x40000>;
+
+ clock-controller@88000000 {
+ compatible = "sirf,prima2-clkc";
+ reg = <0x88000000 0x1000>;
+ interrupts = <3>;
+ };
+
+ reset-controller@88010000 {
+ compatible = "sirf,prima2-rstc";
+ reg = <0x88010000 0x1000>;
+ };
+
+ rsc-controller@88020000 {
+ compatible = "sirf,prima2-rsc";
+ reg = <0x88020000 0x1000>;
+ };
+ };
+
+ mem-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90000000 0x90000000 0x10000>;
+
+ memory-controller@90000000 {
+ compatible = "sirf,prima2-memc";
+ reg = <0x90000000 0x10000>;
+ interrupts = <27>;
+ };
+ };
+
+ disp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x90010000 0x90010000 0x30000>;
+
+ display@90010000 {
+ compatible = "sirf,prima2-lcd";
+ reg = <0x90010000 0x20000>;
+ interrupts = <30>;
+ };
+
+ vpp@90020000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x90020000 0x10000>;
+ interrupts = <31>;
+ };
+ };
+
+ graphics-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x98000000 0x98000000 0x8000000>;
+
+ graphics@98000000 {
+ compatible = "powervr,sgx531";
+ reg = <0x98000000 0x8000000>;
+ interrupts = <6>;
+ };
+ };
+
+ multimedia-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+ multimedia@a0000000 {
+ compatible = "sirf,prima2-video-codec";
+ reg = <0xa0000000 0x8000000>;
+ interrupts = <5>;
+ };
+ };
+
+ dsp-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+ dspif@a8000000 {
+ compatible = "sirf,prima2-dspif";
+ reg = <0xa8000000 0x10000>;
+ interrupts = <9>;
+ };
+
+ gps@a8010000 {
+ compatible = "sirf,prima2-gps";
+ reg = <0xa8010000 0x10000>;
+ interrupts = <7>;
+ };
+
+ dsp@a9000000 {
+ compatible = "sirf,prima2-dsp";
+ reg = <0xa9000000 0x1000000>;
+ interrupts = <8>;
+ };
+ };
+
+ peri-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0xb0000000 0x180000>;
+
+ timer@b0020000 {
+ compatible = "sirf,prima2-tick";
+ reg = <0xb0020000 0x1000>;
+ interrupts = <0>;
+ };
+
+ nand@b0030000 {
+ compatible = "sirf,prima2-nand";
+ reg = <0xb0030000 0x10000>;
+ interrupts = <41>;
+ };
+
+ audio@b0040000 {
+ compatible = "sirf,prima2-audio";
+ reg = <0xb0040000 0x10000>;
+ interrupts = <35>;
+ };
+
+ uart0: uart@b0050000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0050000 0x10000>;
+ interrupts = <17>;
+ };
+
+ uart1: uart@b0060000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0060000 0x10000>;
+ interrupts = <18>;
+ };
+
+ uart2: uart@b0070000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-uart";
+ reg = <0xb0070000 0x10000>;
+ interrupts = <19>;
+ };
+
+ usp0: usp@b0080000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0080000 0x10000>;
+ interrupts = <20>;
+ };
+
+ usp1: usp@b0090000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb0090000 0x10000>;
+ interrupts = <21>;
+ };
+
+ usp2: usp@b00a0000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-usp";
+ reg = <0xb00a0000 0x10000>;
+ interrupts = <22>;
+ };
+
+ dmac0: dma-controller@b00b0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb00b0000 0x10000>;
+ interrupts = <12>;
+ };
+
+ dmac1: dma-controller@b0160000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb0160000 0x10000>;
+ interrupts = <13>;
+ };
+
+ vip@b00C0000 {
+ compatible = "sirf,prima2-vip";
+ reg = <0xb00C0000 0x10000>;
+ };
+
+ spi0: spi@b00d0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb00d0000 0x10000>;
+ interrupts = <15>;
+ };
+
+ spi1: spi@b0170000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-spi";
+ reg = <0xb0170000 0x10000>;
+ interrupts = <16>;
+ };
+
+ i2c0: i2c@b00e0000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00e0000 0x10000>;
+ interrupts = <24>;
+ };
+
+ i2c1: i2c@b00f0000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0xb00f0000 0x10000>;
+ interrupts = <25>;
+ };
+
+ tsc@b0110000 {
+ compatible = "sirf,prima2-tsc";
+ reg = <0xb0110000 0x10000>;
+ interrupts = <33>;
+ };
+
+ gpio: pinctrl@b0120000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,prima2-pinctrl";
+ reg = <0xb0120000 0x10000>;
+ interrupts = <43 44 45 46 47>;
+ gpio-controller;
+ interrupt-controller;
+
+ lcd_16pins_a: lcd0@0 {
+ lcd {
+ sirf,pins = "lcd_16bitsgrp";
+ sirf,function = "lcd_16bits";
+ };
+ };
+ lcd_18pins_a: lcd0@1 {
+ lcd {
+ sirf,pins = "lcd_18bitsgrp";
+ sirf,function = "lcd_18bits";
+ };
+ };
+ lcd_24pins_a: lcd0@2 {
+ lcd {
+ sirf,pins = "lcd_24bitsgrp";
+ sirf,function = "lcd_24bits";
+ };
+ };
+ lcdrom_pins_a: lcdrom0@0 {
+ lcd {
+ sirf,pins = "lcdromgrp";
+ sirf,function = "lcdrom";
+ };
+ };
+ uart0_pins_a: uart0@0 {
+ uart {
+ sirf,pins = "uart0grp";
+ sirf,function = "uart0";
+ };
+ };
+ uart1_pins_a: uart1@0 {
+ uart {
+ sirf,pins = "uart1grp";
+ sirf,function = "uart1";
+ };
+ };
+ uart2_pins_a: uart2@0 {
+ uart {
+ sirf,pins = "uart2grp";
+ sirf,function = "uart2";
+ };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+ uart {
+ sirf,pins = "uart2_nostreamctrlgrp";
+ sirf,function = "uart2_nostreamctrl";
+ };
+ };
+ spi0_pins_a: spi0@0 {
+ spi {
+ sirf,pins = "spi0grp";
+ sirf,function = "spi0";
+ };
+ };
+ spi1_pins_a: spi1@0 {
+ spi {
+ sirf,pins = "spi1grp";
+ sirf,function = "spi1";
+ };
+ };
+ i2c0_pins_a: i2c0@0 {
+ i2c {
+ sirf,pins = "i2c0grp";
+ sirf,function = "i2c0";
+ };
+ };
+ i2c1_pins_a: i2c1@0 {
+ i2c {
+ sirf,pins = "i2c1grp";
+ sirf,function = "i2c1";
+ };
+ };
+ pwm0_pins_a: pwm0@0 {
+ pwm {
+ sirf,pins = "pwm0grp";
+ sirf,function = "pwm0";
+ };
+ };
+ pwm1_pins_a: pwm1@0 {
+ pwm {
+ sirf,pins = "pwm1grp";
+ sirf,function = "pwm1";
+ };
+ };
+ pwm2_pins_a: pwm2@0 {
+ pwm {
+ sirf,pins = "pwm2grp";
+ sirf,function = "pwm2";
+ };
+ };
+ pwm3_pins_a: pwm3@0 {
+ pwm {
+ sirf,pins = "pwm3grp";
+ sirf,function = "pwm3";
+ };
+ };
+ gps_pins_a: gps@0 {
+ gps {
+ sirf,pins = "gpsgrp";
+ sirf,function = "gps";
+ };
+ };
+ vip_pins_a: vip@0 {
+ vip {
+ sirf,pins = "vipgrp";
+ sirf,function = "vip";
+ };
+ };
+ sdmmc0_pins_a: sdmmc0@0 {
+ sdmmc0 {
+ sirf,pins = "sdmmc0grp";
+ sirf,function = "sdmmc0";
+ };
+ };
+ sdmmc1_pins_a: sdmmc1@0 {
+ sdmmc1 {
+ sirf,pins = "sdmmc1grp";
+ sirf,function = "sdmmc1";
+ };
+ };
+ sdmmc2_pins_a: sdmmc2@0 {
+ sdmmc2 {
+ sirf,pins = "sdmmc2grp";
+ sirf,function = "sdmmc2";
+ };
+ };
+ sdmmc3_pins_a: sdmmc3@0 {
+ sdmmc3 {
+ sirf,pins = "sdmmc3grp";
+ sirf,function = "sdmmc3";
+ };
+ };
+ sdmmc4_pins_a: sdmmc4@0 {
+ sdmmc4 {
+ sirf,pins = "sdmmc4grp";
+ sirf,function = "sdmmc4";
+ };
+ };
+ sdmmc5_pins_a: sdmmc5@0 {
+ sdmmc5 {
+ sirf,pins = "sdmmc5grp";
+ sirf,function = "sdmmc5";
+ };
+ };
+ i2s_pins_a: i2s@0 {
+ i2s {
+ sirf,pins = "i2sgrp";
+ sirf,function = "i2s";
+ };
+ };
+ ac97_pins_a: ac97@0 {
+ ac97 {
+ sirf,pins = "ac97grp";
+ sirf,function = "ac97";
+ };
+ };
+ nand_pins_a: nand@0 {
+ nand {
+ sirf,pins = "nandgrp";
+ sirf,function = "nand";
+ };
+ };
+ usp0_pins_a: usp0@0 {
+ usp0 {
+ sirf,pins = "usp0grp";
+ sirf,function = "usp0";
+ };
+ };
+ usp1_pins_a: usp1@0 {
+ usp1 {
+ sirf,pins = "usp1grp";
+ sirf,function = "usp1";
+ };
+ };
+ usp2_pins_a: usp2@0 {
+ usp2 {
+ sirf,pins = "usp2grp";
+ sirf,function = "usp2";
+ };
+ };
+ usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+ usb0_utmi_drvbus {
+ sirf,pins = "usb0_utmi_drvbusgrp";
+ sirf,function = "usb0_utmi_drvbus";
+ };
+ };
+ usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+ usb1_utmi_drvbus {
+ sirf,pins = "usb1_utmi_drvbusgrp";
+ sirf,function = "usb1_utmi_drvbus";
+ };
+ };
+ warm_rst_pins_a: warm_rst@0 {
+ warm_rst {
+ sirf,pins = "warm_rstgrp";
+ sirf,function = "warm_rst";
+ };
+ };
+ pulse_count_pins_a: pulse_count@0 {
+ pulse_count {
+ sirf,pins = "pulse_countgrp";
+ sirf,function = "pulse_count";
+ };
+ };
+ cko0_rst_pins_a: cko0_rst@0 {
+ cko0_rst {
+ sirf,pins = "cko0_rstgrp";
+ sirf,function = "cko0_rst";
+ };
+ };
+ cko1_rst_pins_a: cko1_rst@0 {
+ cko1_rst {
+ sirf,pins = "cko1_rstgrp";
+ sirf,function = "cko1_rst";
+ };
+ };
+ };
+
+ pwm@b0130000 {
+ compatible = "sirf,prima2-pwm";
+ reg = <0xb0130000 0x10000>;
+ };
+
+ efusesys@b0140000 {
+ compatible = "sirf,prima2-efuse";
+ reg = <0xb0140000 0x10000>;
+ };
+
+ pulsec@b0150000 {
+ compatible = "sirf,prima2-pulsec";
+ reg = <0xb0150000 0x10000>;
+ interrupts = <48>;
+ };
+
+ pci-iobg {
+ compatible = "sirf,prima2-pciiobg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x56000000 0x56000000 0x1b00000>;
+
+ sd0: sdhci@56000000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56000000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd1: sdhci@56100000 {
+ cell-index = <1>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56100000 0x100000>;
+ interrupts = <38>;
+ };
+
+ sd2: sdhci@56200000 {
+ cell-index = <2>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56200000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd3: sdhci@56300000 {
+ cell-index = <3>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56300000 0x100000>;
+ interrupts = <23>;
+ };
+
+ sd4: sdhci@56400000 {
+ cell-index = <4>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56400000 0x100000>;
+ interrupts = <39>;
+ };
+
+ sd5: sdhci@56500000 {
+ cell-index = <5>;
+ compatible = "sirf,prima2-sdhc";
+ reg = <0x56500000 0x100000>;
+ interrupts = <39>;
+ };
+
+ pci-copy@57900000 {
+ compatible = "sirf,prima2-pcicp";
+ reg = <0x57900000 0x100000>;
+ interrupts = <40>;
+ };
+
+ rom-interface@57a00000 {
+ compatible = "sirf,prima2-romif";
+ reg = <0x57a00000 0x100000>;
+ };
+ };
+ };
+
+ rtc-iobg {
+ compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80030000 0x10000>;
+
+ gpsrtc@1000 {
+ compatible = "sirf,prima2-gpsrtc";
+ reg = <0x1000 0x1000>;
+ interrupts = <55 56 57>;
+ };
+
+ sysrtc@2000 {
+ compatible = "sirf,prima2-sysrtc";
+ reg = <0x2000 0x1000>;
+ interrupts = <52 53 54>;
+ };
+
+ pwrc@3000 {
+ compatible = "sirf,prima2-pwrc";
+ reg = <0x3000 0x1000>;
+ interrupts = <32>;
+ };
+ };
+
+ uus-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb8000000 0xb8000000 0x40000>;
+
+ usb0: usb@b00e0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8000000 0x10000>;
+ interrupts = <10>;
+ };
+
+ usb1: usb@b00f0000 {
+ compatible = "chipidea,ci13611a-prima2";
+ reg = <0xb8010000 0x10000>;
+ interrupts = <11>;
+ };
+
+ sata@b00f0000 {
+ compatible = "synopsys,dwc-ahsata";
+ reg = <0xb8020000 0x10000>;
+ interrupts = <37>;
+ };
+
+ security@b00f0000 {
+ compatible = "sirf,prima2-security";
+ reg = <0xb8030000 0x10000>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
new file mode 100644
index 0000000..d7c5d72
--- /dev/null
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -0,0 +1,14 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+ model = "Marvell PXA27x familiy SoC";
+ compatible = "marvell,pxa27x";
+
+ pxabus {
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <34>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
new file mode 100644
index 0000000..f18aad3
--- /dev/null
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -0,0 +1,132 @@
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Marvell PXA2xx family SoC";
+ compatible = "marvell,pxa2xx";
+ interrupt-parent = <&pxairq>;
+
+ aliases {
+ serial0 = &ffuart;
+ serial1 = &btuart;
+ serial2 = &stuart;
+ serial3 = &hwuart;
+ i2c0 = &pwri2c;
+ i2c1 = &pxai2c1;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,xscale";
+ };
+ };
+
+ pxabus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pxairq: interrupt-controller@40d00000 {
+ #interrupt-cells = <1>;
+ compatible = "marvell,pxa-intc";
+ interrupt-controller;
+ interrupt-parent;
+ marvell,intc-nr-irqs = <32>;
+ reg = <0x40d00000 0xd0>;
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "mrvl,pxa-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x40e00000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupts = <10>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ ranges;
+
+ gcb0: gpio@40e00000 {
+ reg = <0x40e00000 0x4>;
+ };
+
+ gcb1: gpio@40e00004 {
+ reg = <0x40e00004 0x4>;
+ };
+
+ gcb2: gpio@40e00008 {
+ reg = <0x40e00008 0x4>;
+ };
+ gcb3: gpio@40e0000c {
+ reg = <0x40e0000c 0x4>;
+ };
+ };
+
+ ffuart: uart@40100000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40100000 0x30>;
+ interrupts = <22>;
+ status = "disabled";
+ };
+
+ btuart: uart@40200000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40200000 0x30>;
+ interrupts = <21>;
+ status = "disabled";
+ };
+
+ stuart: uart@40700000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40700000 0x30>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ hwuart: uart@41100000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x41100000 0x30>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ pxai2c1: i2c@40301680 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40301680 0x30>;
+ interrupts = <18>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usb0: ohci@4c000000 {
+ compatible = "mrvl,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@41100000 {
+ compatible = "mrvl,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ status = "disabled";
+ };
+
+ rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
new file mode 100644
index 0000000..f9d92da
--- /dev/null
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -0,0 +1,32 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+ model = "Marvell PXA3xx familiy SoC";
+ compatible = "marvell,pxa3xx";
+
+ pxabus {
+ pwri2c: i2c@40f500c0 {
+ compatible = "mrvl,pwri2c";
+ reg = <0x40f500c0 0x30>;
+ interrupts = <6>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ nand0: nand@43100000 {
+ compatible = "marvell,pxa3xx-nand";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <56>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index aebf32d..a3be44d8 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -25,6 +25,11 @@
interrupt-parent = <&intc>;
ranges;
+ L2: l2-cache {
+ compatible = "marvell,tauros2-cache";
+ marvell,tauros2-cache-features = <0x3>;
+ };
+
axi@d4200000 { /* AXI */
compatible = "mrvl,axi-bus", "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index f146dbf..c3ef1ad 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -275,6 +275,160 @@
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo0";
+ regulator-name = "vdd_ldo0,vddio_pex_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
pmc {
@@ -310,6 +464,72 @@
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&pmic 2 0>;
+ enable-active-high;
+ /* Hack until board-harmony-pcie.c is removed */
+ status = "disabled";
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 22 0>; /* gpio PC6 */
+ enable-active-high;
+ };
+
+ regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-harmony",
"nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 0000000..a2d6d65
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Medcom-Wide board";
+ compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-wm8903-medcom-wide",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Medcom-Wide";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 684a9e1..ddf287f 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -272,12 +272,170 @@
status = "okay";
clock-frequency = <400000>;
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&p5valw_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "+1.2vs_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "+1.0vs_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "+3.7vs_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "+1.1vs_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "+1.2vs_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "+3.3vs_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "+2.85vs_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ /*
+ * Research indicates this should be
+ * 1.8v; other boards that use this
+ * rail for the same purpose need it
+ * set to 1.8v. The schematic signal
+ * name is incorrect; perhaps copied
+ * from an incorrect NVIDIA reference.
+ */
+ regulator-name = "+2.85vs_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "+3.3vs_rtc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
usb@c5000000 {
status = "okay";
};
@@ -325,6 +483,21 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p5valw_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+5valw";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-alc5632-paz00",
"nvidia,tegra-audio-alc5632";
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
new file mode 100644
index 0000000..331a3ef
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Plutux board";
+ compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-plutux",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design Plutux";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 85e621a..e60dc71 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -374,6 +374,154 @@
status = "okay";
clock-frequency = <400000>;
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
temperature-sensor@4c {
compatible = "nct1008";
reg = <0x4c>;
@@ -387,6 +535,10 @@
};
};
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
memory-controller@0x7000f400 {
emc-table@190000 {
reg = <190000>;
@@ -473,6 +625,40 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-seaboard",
"nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
new file mode 100644
index 0000000..f18cec9
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,449 @@
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten SOM";
+ compatible = "ad,tamonten", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+ "spia", "spib", "spic";
+ nvidia,function = "gmi";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ dta {
+ nvidia,pins = "dta", "dtd";
+ nvidia,function = "sdio2";
+ };
+ dtb {
+ nvidia,pins = "dtb", "dtc", "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv", "slxa", "slxk";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint", "pta";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uarta";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+ "ld3", "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11", "ld12",
+ "ld13", "ld14", "ld15", "ld16", "ld17",
+ "ldc", "ldi", "lhp0", "lhp1", "lhp2",
+ "lhs", "lm0", "lm1", "lpp", "lpw0",
+ "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+ "lsda", "lsdi", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd";
+ nvidia,function = "pwm";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ slxc {
+ nvidia,pins = "slxc", "slxd";
+ nvidia,function = "spdif";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+ "cdev1", "cdev2", "dap1", "dtb", "gma",
+ "gmb", "gmc", "gmd", "gme", "gpu7",
+ "gpv", "i2cp", "pta", "rm", "slxa",
+ "slxk", "spia", "spib", "uac";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_csus {
+ nvidia,pins = "csus", "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+ "dtc", "dte", "dtf", "gpu", "sdio1",
+ "slxc", "slxd", "spdi", "spdo", "spig",
+ "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_ddc {
+ nvidia,pins = "ddc", "dta", "dtd", "kbca",
+ "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+ "sdc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsc1", "lsck", "lsda", "lsdi",
+ "lvp0", "owc", "sdb";
+ nvidia,tristate = <1>;
+ };
+ conf_irrx {
+ nvidia,pins = "irrx", "irtx", "sdd", "spic",
+ "spie", "spih", "uaa", "uab", "uad",
+ "uca", "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <2>;
+ };
+ conf_ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+ "lvs", "pmc";
+ nvidia,tristate = <0>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sys_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sys_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sys_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo0";
+ regulator-name = "vdd_ldo0,vddio_pex_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000600 {
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
new file mode 100644
index 0000000..9aff31b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+/include/ "tegra20-tamonten.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten Evaluation Carrier";
+ compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <187 0x04>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff
+ 0xffffffff
+ 0
+ 0xffffffff
+ 0xffffffff>;
+ };
+ };
+
+ sound {
+ compatible = "ad,tegra-audio-wm8903-tec",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "Avionic Design TEC";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544..3e5952f 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -289,6 +289,158 @@
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
};
usb@c5000000 {
@@ -317,6 +469,60 @@
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_pnl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 22 0>; /* gpio PC6 */
+ enable-active-high;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-ventana",
"nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 6916310..c636d00 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -261,6 +261,286 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ max8907@3c {
+ compatible = "maxim,max8907";
+ reg = <0x3c>;
+ interrupts = <0 86 0x4>;
+
+ maxim,system-power-controller;
+
+ mbatt-supply = <&usb0_vbus_reg>;
+ in-v1-supply = <&mbatt_reg>;
+ in-v2-supply = <&mbatt_reg>;
+ in-v3-supply = <&mbatt_reg>;
+ in1-supply = <&mbatt_reg>;
+ in2-supply = <&nvvdd_sv3_reg>;
+ in3-supply = <&mbatt_reg>;
+ in4-supply = <&mbatt_reg>;
+ in5-supply = <&mbatt_reg>;
+ in6-supply = <&mbatt_reg>;
+ in7-supply = <&mbatt_reg>;
+ in8-supply = <&mbatt_reg>;
+ in9-supply = <&mbatt_reg>;
+ in10-supply = <&mbatt_reg>;
+ in11-supply = <&mbatt_reg>;
+ in12-supply = <&mbatt_reg>;
+ in13-supply = <&mbatt_reg>;
+ in14-supply = <&mbatt_reg>;
+ in15-supply = <&mbatt_reg>;
+ in16-supply = <&mbatt_reg>;
+ in17-supply = <&nvvdd_sv3_reg>;
+ in18-supply = <&nvvdd_sv3_reg>;
+ in19-supply = <&mbatt_reg>;
+ in20-supply = <&mbatt_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mbatt_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "mbatt";
+ regulator-name = "vbat_pmu";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sd1";
+ regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sd2";
+ regulator-name = "nvvdd_sv2,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ nvvdd_sv3_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sd3";
+ regulator-name = "nvvdd_sv3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-name = "nvvdd_ldo2,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo3";
+ regulator-name = "nvvdd_ldo3,vcom_1v8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-name = "nvvdd_ldo4,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-name = "nvvdd_ldo7,avddio_audio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo9";
+ regulator-name = "nvvdd_ldo9,avdd_cam*";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo10";
+ regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo11";
+ regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@15 {
+ reg = <15>;
+ regulator-compatible = "ldo12";
+ regulator-name = "nvvdd_ldo12,vddio_sdio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ regulator@16 {
+ reg = <16>;
+ regulator-compatible = "ldo13";
+ regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@17 {
+ reg = <17>;
+ regulator-compatible = "ldo14";
+ regulator-name = "nvvdd_ldo14,avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@18 {
+ reg = <18>;
+ regulator-compatible = "ldo15";
+ regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@19 {
+ reg = <19>;
+ regulator-compatible = "ldo16";
+ regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ regulator@20 {
+ reg = <20>;
+ regulator-compatible = "ldo17";
+ regulator-name = "nvvdd_ldo17,vddio_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@21 {
+ reg = <21>;
+ regulator-compatible = "ldo18";
+ regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@22 {
+ reg = <22>;
+ regulator-compatible = "ldo19";
+ regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ regulator@23 {
+ reg = <23>;
+ regulator-compatible = "ldo20";
+ regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ regulator@24 {
+ reg = <24>;
+ regulator-compatible = "out5v";
+ regulator-name = "usb0_vbus_reg";
+ };
+
+ regulator@25 {
+ reg = <25>;
+ regulator-compatible = "out33v";
+ regulator-name = "pmu_out3v3";
+ };
+
+ regulator@26 {
+ reg = <26>;
+ regulator-compatible = "bbat";
+ regulator-name = "pmu_bbat";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2400000>;
+ regulator-always-on;
+ };
+
+ regulator@27 {
+ reg = <27>;
+ regulator-compatible = "sdby";
+ regulator-name = "vdd_aon";
+ regulator-always-on;
+ };
+
+ regulator@28 {
+ reg = <28>;
+ regulator-compatible = "vrtc";
+ regulator-name = "vrtc,pmu_vccadc";
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
};
usb@c5000000 {
@@ -284,6 +564,21 @@
bus-width = <8>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb0_vbus_reg: regulator {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 405d167..67a6cd9 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,7 +123,7 @@
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
new file mode 100644
index 0000000..dd4222f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+ compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 0>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 0>;
+ };
+
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ reg = <104>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 2 0>;
+ };
+
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ reg = <105>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 83 0>; /* GPIO PK3 */
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
new file mode 100644
index 0000000..0828f09
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+ compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddr_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ regulator-name = "ddr";
+ reg = <100>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 7 0>;
+ };
+
+ sys_3v3_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "sys_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pmic 6 0>;
+ };
+
+ usb1_vbus_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 238 0>; /* GPIO PDD6 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ usb3_vbus_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 236 0>; /* GPIO PDD4 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+
+ vdd_5v0_reg: regulator@104 {
+ compatible = "regulator-fixed";
+ reg = <104>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pmic 8 0>;
+ };
+
+ vdd_bl_reg: regulator@105 {
+ compatible = "regulator-fixed";
+ reg = <105>;
+ regulator-name = "vdd_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 234 0>; /* GPIO PDD2 */
+ };
+
+ vdd_bl2_reg: regulator@106 {
+ compatible = "regulator-fixed";
+ reg = <106>;
+ regulator-name = "vdd_bl2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 232 0>; /* GPIO PDD0 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
deleted file mode 100644
index c169bce..0000000
--- a/arch/arm/boot/dts/tegra30-cardhu.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra30.dtsi"
-
-/ {
- model = "NVIDIA Tegra30 Cardhu evaluation board";
- compatible = "nvidia,cardhu", "nvidia,tegra30";
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- sdmmc1_clk_pz0 {
- nvidia,pins = "sdmmc1_clk_pz0";
- nvidia,function = "sdmmc1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc1_cmd_pz1 {
- nvidia,pins = "sdmmc1_cmd_pz1",
- "sdmmc1_dat0_py7",
- "sdmmc1_dat1_py6",
- "sdmmc1_dat2_py5",
- "sdmmc1_dat3_py4";
- nvidia,function = "sdmmc1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- sdmmc4_clk_pcc4 {
- nvidia,pins = "sdmmc4_clk_pcc4",
- "sdmmc4_rst_n_pcc3";
- nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- sdmmc4_dat0_paa0 {
- nvidia,pins = "sdmmc4_dat0_paa0",
- "sdmmc4_dat1_paa1",
- "sdmmc4_dat2_paa2",
- "sdmmc4_dat3_paa3",
- "sdmmc4_dat4_paa4",
- "sdmmc4_dat5_paa5",
- "sdmmc4_dat6_paa6",
- "sdmmc4_dat7_paa7";
- nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- };
- dap2_fs_pa2 {
- nvidia,pins = "dap2_fs_pa2",
- "dap2_sclk_pa3",
- "dap2_din_pa4",
- "dap2_dout_pa5";
- nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- };
- };
- };
-
- serial@70006000 {
- status = "okay";
- clock-frequency = <408000000>;
- };
-
- i2c@7000c000 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000c400 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000c500 {
- status = "okay";
- clock-frequency = <100000>;
-
- /* ALS and Proximity sensor */
- isl29028@44 {
- compatible = "isil,isl29028";
- reg = <0x44>;
- interrupt-parent = <&gpio>;
- interrupts = <88 0x04>; /*gpio PL0 */
- };
- };
-
- i2c@7000c700 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <100000>;
-
- wm8903: wm8903@1a {
- compatible = "wlf,wm8903";
- reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <179 0x04>; /* gpio PW3 */
-
- gpio-controller;
- #gpio-cells = <2>;
-
- micdet-cfg = <0>;
- micdet-delay = <100>;
- gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
- };
-
- tps62361 {
- compatible = "ti,tps62361";
- reg = <0x60>;
-
- regulator-name = "tps62361-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- };
- };
-
- ahub {
- i2s@70080400 {
- status = "okay";
- };
- };
-
- sdhci@78000000 {
- status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
- bus-width = <4>;
- };
-
- sdhci@78000600 {
- status = "okay";
- bus-width = <8>;
- };
-
- sound {
- compatible = "nvidia,tegra-audio-wm8903-cardhu",
- "nvidia,tegra-audio-wm8903";
- nvidia,model = "NVIDIA Tegra Cardhu";
-
- nvidia,audio-routing =
- "Headphone Jack", "HPOUTR",
- "Headphone Jack", "HPOUTL",
- "Int Spk", "ROP",
- "Int Spk", "RON",
- "Int Spk", "LOP",
- "Int Spk", "LON",
- "Mic Jack", "MICBIAS",
- "IN1L", "Mic Jack";
-
- nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,audio-codec = <&wm8903>;
-
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
- };
-};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
new file mode 100644
index 0000000..d10c9c5
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -0,0 +1,475 @@
+/include/ "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+ model = "NVIDIA Tegra30 Cardhu evaluation board";
+ compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ dap2_fs_pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <408000000>;
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* ALS and Proximity sensor */
+ isl29028@44 {
+ compatible = "isil,isl29028";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <88 0x04>; /*gpio PL0 */
+ };
+ };
+
+ i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <179 0x04>; /* gpio PW3 */
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+ };
+
+ tps62361 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <0 86 0x4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_ac_bat_reg>;
+ vcc2-supply = <&vdd_ac_bat_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&vdd_5v0_reg>;
+ vcc5-supply = <&vdd_ac_bat_reg>;
+ vcc6-supply = <&vdd2_reg>;
+ vcc7-supply = <&vdd_ac_bat_reg>;
+ vccio-supply = <&vdd_ac_bat_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vdd1";
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vdd2";
+ regulator-name = "vdd_1v5_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vddctrl_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vddctrl";
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vio";
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_pexa,vdd_pexb";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo2_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_sata,avdd_plle";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ ldo4_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vddio_sdmmc,avdd_vdac";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo6";
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
+ pmc {
+ status = "okay";
+ nvidia,invert-interrupt;
+ };
+
+ sdhci@78000000 {
+ status = "okay";
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ bus-width = <4>;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ cam_1v8_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "cam_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio 220 0>; /* gpio PBB4 */
+ vin-supply = <&vio_reg>;
+ };
+
+ cp_5v_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "cp_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+ };
+
+ emmc_3v3_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "emmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 25 0>; /* gpio PD1 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ modem_3v3_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "modem_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 30 0>; /* gpio PD6 */
+ };
+
+ pex_hvdd_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "pex_hvdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 95 0>; /* gpio PL7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam1_ldo_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vdd_cam1_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio 142 0>; /* gpio PR6 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam2_ldo_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vdd_cam2_ldo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ enable-active-high;
+ gpio = <&gpio 143 0>; /* gpio PR7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_cam3_ldo_reg: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "vdd_cam3_ldo";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 144 0>; /* gpio PS0 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_com_reg: regulator@9 {
+ compatible = "regulator-fixed";
+ reg = <9>;
+ regulator-name = "vdd_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 24 0>; /* gpio PD0 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_fuse_3v3_reg: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "vdd_fuse_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 94 0>; /* gpio PL6 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_pnl1_reg: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "vdd_pnl1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio 92 0>; /* gpio PL4 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
+ vdd_vid_reg: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "vddio_vid";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 152 0>; /* GPIO PT0 */
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_reg>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-cardhu",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Cardhu";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 3e4334d..b1497c7 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,7 +117,7 @@
status = "disabled";
};
- pwm {
+ pwm: pwm {
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
new file mode 100644
index 0000000..a632724
--- /dev/null
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
new file mode 100644
index 0000000..92693a8
--- /dev/null
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65910";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vrtc_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vrtc";
+ };
+
+ vio_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vio";
+ };
+
+ vdd1_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vdd1";
+ };
+
+ vdd2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vdd2";
+ };
+
+ vdd3_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "vdd3";
+ };
+
+ vdig1_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "vdig1";
+ };
+
+ vdig2_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "vdig2";
+ };
+
+ vpll_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "vpll";
+ };
+
+ vdac_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "vdac";
+ };
+
+ vaux1_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "vaux1";
+ };
+
+ vaux2_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "vaux2";
+ };
+
+ vaux33_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "vaux33";
+ };
+
+ vmmc_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "vmmc";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 22f4d13..ff00017 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,19 +19,19 @@
interrupts = <11>;
};
- vdac: regulator@0 {
+ vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vpll2: regulator@1 {
+ vpll2: regulator-vpll2 {
compatible = "ti,twl4030-vpll2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vmmc1: regulator@2 {
+ vmmc1: regulator-vmmc1 {
compatible = "ti,twl4030-vmmc1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index d351b27..123e2c4 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -20,70 +20,70 @@
interrupts = <11>;
};
- vaux1: regulator@0 {
+ vaux1: regulator-vaux1 {
compatible = "ti,twl6030-vaux1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vaux2: regulator@1 {
+ vaux2: regulator-vaux2 {
compatible = "ti,twl6030-vaux2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
};
- vaux3: regulator@2 {
+ vaux3: regulator-vaux3 {
compatible = "ti,twl6030-vaux3";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vmmc: regulator@3 {
+ vmmc: regulator-vmmc {
compatible = "ti,twl6030-vmmc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
};
- vpp: regulator@4 {
+ vpp: regulator-vpp {
compatible = "ti,twl6030-vpp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
};
- vusim: regulator@5 {
+ vusim: regulator-vusim {
compatible = "ti,twl6030-vusim";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2900000>;
};
- vdac: regulator@6 {
+ vdac: regulator-vdac {
compatible = "ti,twl6030-vdac";
};
- vana: regulator@7 {
+ vana: regulator-vana {
compatible = "ti,twl6030-vana";
};
- vcxio: regulator@8 {
+ vcxio: regulator-vcxio {
compatible = "ti,twl6030-vcxio";
regulator-always-on;
};
- vusb: regulator@9 {
+ vusb: regulator-vusb {
compatible = "ti,twl6030-vusb";
};
- v1v8: regulator@10 {
+ v1v8: regulator-v1v8 {
compatible = "ti,twl6030-v1v8";
regulator-always-on;
};
- v2v1: regulator@11 {
+ v2v1: regulator-v2v1 {
compatible = "ti,twl6030-v2v1";
regulator-always-on;
};
- clk32kg: regulator@12 {
+ clk32kg: regulator-clk32kg {
compatible = "ti,twl6030-clk32kg";
};
};
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3c9f32f..565132d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,9 +32,7 @@
CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 4edcfb4..36d60dd 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -23,12 +23,6 @@
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e58edc3..6230304 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -123,6 +123,7 @@
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
deleted file mode 100644
index 35a31cc..0000000
--- a/arch/arm/configs/pnx4008_defconfig
+++ /dev/null
@@ -1,472 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig
index c328ac6..807d4e2 100644
--- a/arch/arm/configs/prima2_defconfig
+++ b/arch/arm/configs/prima2_defconfig
@@ -1,4 +1,6 @@
CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
@@ -8,9 +10,7 @@
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_ARCH_PRIMA2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+CONFIG_ARCH_SIRF=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_KEXEC=y
@@ -36,7 +36,6 @@
CONFIG_SPI_SIRF=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_MASS_STORAGE=m
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index db22453..0d6bb73 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -145,6 +145,8 @@
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 03fb936..5c8b3bf4 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -320,4 +320,12 @@
.size \name , . - \name
.endm
+ .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+ adds \tmp, \addr, #\size - 1
+ sbcccs \tmp, \tmp, \limit
+ bcs \bad
+#endif
+ .endm
+
#endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
index 538f17c..295e2e4 100644
--- a/arch/arm/include/asm/hardware/cache-tauros2.h
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -8,4 +8,7 @@
* warranty of any kind, whether express or implied.
*/
-extern void __init tauros2_init(void);
+#define CACHE_TAUROS2_PREFETCH_ON (1 << 0)
+#define CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1)
+
+extern void __init tauros2_init(unsigned int features);
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 2ff2c75..02fe2fb 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -217,18 +217,8 @@
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
-#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA 0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\
- IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\
- IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
- IOP3XX_PCI_LOWER_IO_PA) +\
- IOP3XX_PCI_LOWER_IO_VA)
-
+#define IOP3XX_PCI_LOWER_IO_BA 0x00000000
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 815c669..8f4db67 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -113,11 +113,19 @@
#define __iowmb() do { } while (0)
#endif
+/* PCI fixed i/o mapping */
+#define PCI_IO_VIRT_BASE 0xfee00000
+
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+
/*
* Now, pick up the machine-defined IO definitions
*/
#ifdef CONFIG_NEED_MACH_IO_H
#include <mach/io.h>
+#elif defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT ((resource_size_t)0xfffff)
+#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
#else
#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT)
#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index a6efcdd..195ac2f 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -9,6 +9,9 @@
*
* Page table mapping constructs and function prototypes
*/
+#ifndef __ASM_MACH_MAP_H
+#define __ASM_MACH_MAP_H
+
#include <asm/io.h>
struct map_desc {
@@ -34,6 +37,8 @@
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
+extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
+ void *caller);
struct mem_type;
extern const struct mem_type *get_mem_type(unsigned int type);
@@ -44,4 +49,7 @@
const struct mem_type *mtype);
#else
#define iotable_init(map,num) do { } while (0)
+#define vm_reserve_area_early(a,s,c) do { } while (0)
+#endif
+
#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 26c511f..db9fedb 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -11,6 +11,8 @@
#ifndef __ASM_MACH_PCI_H
#define __ASM_MACH_PCI_H
+#include <linux/ioport.h>
+
struct pci_sys_data;
struct pci_ops;
struct pci_bus;
@@ -42,6 +44,8 @@
unsigned long io_offset; /* bus->cpu IO mapping offset */
struct pci_bus *bus; /* PCI bus */
struct list_head resources; /* root bus resources (apertures) */
+ struct resource io_res;
+ char io_res_name[12];
/* Bridge swizzling */
u8 (*swizzle)(struct pci_dev *, u8 *);
/* IRQ mapping */
@@ -55,6 +59,15 @@
void pci_common_init(struct hw_pci *);
/*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
+/*
* PCI controllers
*/
extern struct pci_ops iop3xx_ops;
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e965f1b..5f6ddcc 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -187,6 +187,7 @@
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
#endif
+#endif /* __ASSEMBLY__ */
#ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@
#endif
#endif
+#ifndef __ASSEMBLY__
+
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 314d466..99a1951 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -199,6 +199,9 @@
{
pgtable_page_dtor(pte);
+#ifdef CONFIG_ARM_LPAE
+ tlb_add_flush(tlb, addr);
+#else
/*
* With the classic ARM MMU, a pte page has two corresponding pmd
* entries, each covering 1MB.
@@ -206,6 +209,7 @@
addr &= PMD_MASK;
tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
tlb_add_flush(tlb, addr + SZ_1M);
+#endif
tlb_remove_page(tlb, pte);
}
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 479a635..77bd79f 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -101,28 +101,39 @@
extern int __get_user_2(void *);
extern int __get_user_4(void *);
-#define __get_user_x(__r2,__p,__e,__s,__i...) \
+#define __GUP_CLOBBER_1 "lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2 "ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4 "lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%1", "r2") \
+ __asmeq("%3", "r1") \
"bl __get_user_" #__s \
: "=&r" (__e), "=r" (__r2) \
- : "0" (__p) \
- : __i, "cc")
+ : "0" (__p), "r" (__l) \
+ : __GUP_CLOBBER_##__s)
-#define get_user(x,p) \
+#define __get_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
register unsigned long __r2 asm("r2"); \
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __get_user_x(__r2, __p, __e, 1, "lr"); \
- break; \
+ __get_user_x(__r2, __p, __e, __l, 1); \
+ break; \
case 2: \
- __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __get_user_x(__r2, __p, __e, 4, "lr"); \
+ __get_user_x(__r2, __p, __e, __l, 4); \
break; \
default: __e = __get_user_bad(); break; \
} \
@@ -130,42 +141,57 @@
__e; \
})
+#define get_user(x,p) \
+ ({ \
+ might_fault(); \
+ __get_user_check(x,p); \
+ })
+
extern int __put_user_1(void *, unsigned int);
extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
-#define __put_user_x(__r2,__p,__e,__s) \
+#define __put_user_x(__r2,__p,__e,__l,__s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
+ __asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
+ : "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc")
-#define put_user(x,p) \
+#define __put_user_check(x,p) \
({ \
+ unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __r2 asm("r2") = (x); \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
+ register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
case 1: \
- __put_user_x(__r2, __p, __e, 1); \
+ __put_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
- __put_user_x(__r2, __p, __e, 2); \
+ __put_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
- __put_user_x(__r2, __p, __e, 4); \
+ __put_user_x(__r2, __p, __e, __l, 4); \
break; \
case 8: \
- __put_user_x(__r2, __p, __e, 8); \
+ __put_user_x(__r2, __p, __e, __l, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
__e; \
})
+#define put_user(x,p) \
+ ({ \
+ might_fault(); \
+ __put_user_check(x,p); \
+ })
+
#else /* CONFIG_MMU */
/*
@@ -219,6 +245,7 @@
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
@@ -300,6 +327,7 @@
unsigned long __pu_addr = (unsigned long)(ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
__chk_user_ptr(ptr); \
+ might_fault(); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 2b2f25e..b244696 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <asm/mach-types.h>
+#include <asm/mach/map.h>
#include <asm/mach/pci.h>
static int debug_pci;
@@ -423,6 +424,38 @@
return irq;
}
+static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys)
+{
+ int ret;
+ struct pci_host_bridge_window *window;
+
+ if (list_empty(&sys->resources)) {
+ pci_add_resource_offset(&sys->resources,
+ &iomem_resource, sys->mem_offset);
+ }
+
+ list_for_each_entry(window, &sys->resources, list) {
+ if (resource_type(window->res) == IORESOURCE_IO)
+ return 0;
+ }
+
+ sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io;
+ sys->io_res.end = (busnr + 1) * SZ_64K - 1;
+ sys->io_res.flags = IORESOURCE_IO;
+ sys->io_res.name = sys->io_res_name;
+ sprintf(sys->io_res_name, "PCI%d I/O", busnr);
+
+ ret = request_resource(&ioport_resource, &sys->io_res);
+ if (ret) {
+ pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);
+ return ret;
+ }
+ pci_add_resource_offset(&sys->resources, &sys->io_res,
+ sys->io_offset);
+
+ return 0;
+}
+
static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
{
struct pci_sys_data *sys = NULL;
@@ -445,11 +478,10 @@
ret = hw->setup(nr, sys);
if (ret > 0) {
- if (list_empty(&sys->resources)) {
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
- pci_add_resource_offset(&sys->resources,
- &iomem_resource, sys->mem_offset);
+ ret = pcibios_init_resources(nr, sys);
+ if (ret) {
+ kfree(sys);
+ break;
}
if (hw->scan)
@@ -627,3 +659,15 @@
return 0;
}
+
+void __init pci_map_io_early(unsigned long pfn)
+{
+ struct map_desc pci_io_desc = {
+ .virtual = PCI_IO_VIRT_BASE,
+ .type = MT_DEVICE,
+ .length = SZ_64K,
+ };
+
+ pci_io_desc.pfn = pfn;
+ iotable_init(&pci_io_desc, 1);
+}
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index ba386bd..281bf33 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -159,6 +159,12 @@
arch >= ARM_DEBUG_ARCH_V7_1;
}
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+ return 0;
+}
+
/* Determine number of WRP registers available. */
static int get_num_wrp_resources(void)
{
@@ -604,13 +610,14 @@
/* Aligned */
break;
case 1:
- /* Allow single byte watchpoint. */
- if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
- break;
case 2:
/* Allow halfword watchpoints and breakpoints. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
+ case 3:
+ /* Allow single byte watchpoint. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
default:
ret = -EINVAL;
goto out;
@@ -619,18 +626,35 @@
info->address &= ~alignment_mask;
info->ctrl.len <<= offset;
- /*
- * Currently we rely on an overflow handler to take
- * care of single-stepping the breakpoint when it fires.
- * In the case of userspace breakpoints on a core with V7 debug,
- * we can use the mismatch feature as a poor-man's hardware
- * single-step, but this only works for per-task breakpoints.
- */
- if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
- !core_has_mismatch_brps() || !bp->hw.bp_target)) {
- pr_warning("overflow handler required but none found\n");
- ret = -EINVAL;
+ if (!bp->overflow_handler) {
+ /*
+ * Mismatch breakpoints are required for single-stepping
+ * breakpoints.
+ */
+ if (!core_has_mismatch_brps())
+ return -EINVAL;
+
+ /* We don't allow mismatch breakpoints in kernel space. */
+ if (arch_check_bp_in_kernelspace(bp))
+ return -EPERM;
+
+ /*
+ * Per-cpu breakpoints are not supported by our stepping
+ * mechanism.
+ */
+ if (!bp->hw.bp_target)
+ return -EINVAL;
+
+ /*
+ * We only support specific access types if the fsr
+ * reports them.
+ */
+ if (!debug_exception_updates_fsr() &&
+ (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+ info->ctrl.type == ARM_BREAKPOINT_STORE))
+ return -EINVAL;
}
+
out:
return ret;
}
@@ -706,10 +730,12 @@
goto unlock;
/* Check that the access type matches. */
- access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
- HW_BREAKPOINT_R;
- if (!(access & hw_breakpoint_type(wp)))
- goto unlock;
+ if (debug_exception_updates_fsr()) {
+ access = (fsr & ARM_FSR_ACCESS_MASK) ?
+ HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+ }
/* We have a winner. */
info->trigger = addr;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f794521..b0179b8 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -420,20 +420,23 @@
#endif
instr = *(u32 *) pc;
} else if (thumb_mode(regs)) {
- get_user(instr, (u16 __user *)pc);
+ if (get_user(instr, (u16 __user *)pc))
+ goto die_sig;
if (is_wide_instruction(instr)) {
unsigned int instr2;
- get_user(instr2, (u16 __user *)pc+1);
+ if (get_user(instr2, (u16 __user *)pc+1))
+ goto die_sig;
instr <<= 16;
instr |= instr2;
}
- } else {
- get_user(instr, (u32 __user *)pc);
+ } else if (get_user(instr, (u32 __user *)pc)) {
+ goto die_sig;
}
if (call_undef_hook(regs, instr) == 0)
return;
+die_sig:
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index d6dacc6..395d5fb 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -59,6 +59,7 @@
{
pr_info("Switching to timer-based delay loop\n");
lpj_fine = freq / HZ;
+ loops_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 11093a7..9b06bb4 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -16,8 +16,9 @@
* __get_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* Outputs: r0 is the error code
- * r2, r3 contains the zero-extended value
+ * r2 contains the zero-extended value
* lr corrupted
*
* No other registers must be altered. (see <asm/uaccess.h>
@@ -27,33 +28,39 @@
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__get_user_1)
+ check_uaccess r0, 1, r1, r2, __get_user_bad
1: TUSER(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb) r2, [r0]
-3: TUSER(ldrb) r3, [r0, #1]
+ check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb .req ip
+2: ldrbt r2, [r0], #1
+3: ldrbt rb, [r0], #0
#else
-2: TUSER(ldrb) r2, [r0], #1
-3: TUSER(ldrb) r3, [r0]
+rb .req r0
+2: ldrb r2, [r0]
+3: ldrb rb, [r0, #1]
#endif
#ifndef __ARMEB__
- orr r2, r2, r3, lsl #8
+ orr r2, r2, rb, lsl #8
#else
- orr r2, r3, r2, lsl #8
+ orr r2, rb, r2, lsl #8
#endif
mov r0, #0
mov pc, lr
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
+ check_uaccess r0, 4, r1, r2, __get_user_bad
4: TUSER(ldr) r2, [r0]
mov r0, #0
mov pc, lr
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 7db2599..3d73dcb 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -16,6 +16,7 @@
* __put_user_X
*
* Inputs: r0 contains the address
+ * r1 contains the address limit, which must be preserved
* r2, r3 contains the value
* Outputs: r0 is the error code
* lr corrupted
@@ -27,16 +28,19 @@
* Note also that it is intended that __put_user_bad is not global.
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
ENTRY(__put_user_1)
+ check_uaccess r0, 1, r1, ip, __put_user_bad
1: TUSER(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
ENTRY(__put_user_2)
+ check_uaccess r0, 2, r1, ip, __put_user_bad
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
@@ -60,12 +64,14 @@
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
+ check_uaccess r0, 4, r1, ip, __put_user_bad
4: TUSER(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
+ check_uaccess r0, 8, r1, ip, __put_user_bad
#ifdef CONFIG_THUMB2_KERNEL
5: TUSER(str) r2, [r0]
6: TUSER(str) r3, [r0, #4]
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 76e7953..c18a504 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -37,7 +37,7 @@
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include "core.h"
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index adbfb19..4b50228 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -43,11 +43,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include "clock.h"
-#include <csp/secHw.h>
#include <mach/csp/secHw_def.h>
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index 96273ff..5050833 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -26,15 +26,15 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/export.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/reg.h>
-#include <csp/delay.h>
+#include <mach/csp/reg.h>
+#include <linux/delay.h>
/* ---- Private Constants and Types --------------------------------------- */
@@ -61,21 +61,21 @@
/****************************************************************************/
chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
) {
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
- volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
+ uint32_t __iomem *pDependentClock = NULL;
uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
uint32_t dependentClockType = 0;
uint32_t vcoHz = 0;
/* Get VCO frequencies */
- if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
uint64_t adjustFreq = 0;
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
@@ -86,13 +86,13 @@
} else {
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
}
vcoFreqPll2Hz =
chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
switch (clock) {
@@ -187,51 +187,51 @@
if (pPLLReg) {
/* Obtain PLL clock frequency */
- if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ if (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
/* Return crystal clock frequency when bypassed */
return chipcHw_XTAL_FREQ_Hz;
} else if (clock == chipcHw_CLOCK_DDR) {
/* DDR frequency is configured in PLLDivider register */
- return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ return chipcHw_divide (vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256));
} else {
/* From chip revision number B0, LCD clock is internally divided by 2 */
if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
vcoHz >>= 1;
}
/* Obtain PLL clock frequency using VCO dividers */
- return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ return chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
}
} else if (pClockCtrl) {
/* Obtain divider clock frequency */
uint32_t div;
uint32_t freq = 0;
- if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ if (readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
/* Return crystal clock frequency when bypassed */
return chipcHw_XTAL_FREQ_Hz;
} else if (pDependentClock) {
/* Identify the dependent clock frequency */
switch (dependentClockType) {
case PLL_CLOCK:
- if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ if (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
/* Use crystal clock frequency when dependent PLL clock is bypassed */
freq = chipcHw_XTAL_FREQ_Hz;
} else {
/* Obtain PLL clock frequency using VCO dividers */
- div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+ div = readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
freq = div ? chipcHw_divide(vcoHz, div) : 0;
}
break;
case NON_PLL_CLOCK:
- if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ if (pDependentClock == &pChipcHw->ACLKClock) {
freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
} else {
- if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ if (readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
/* Use crystal clock frequency when dependent divider clock is bypassed */
freq = chipcHw_XTAL_FREQ_Hz;
} else {
/* Obtain divider clock frequency using XTAL dividers */
- div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
}
}
@@ -242,7 +242,7 @@
freq = chipcHw_XTAL_FREQ_Hz;
}
- div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ div = readl(pClockCtrl) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
return chipcHw_divide(freq, (div ? div : 256));
}
return 0;
@@ -261,9 +261,9 @@
chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
uint32_t freq /* [ IN ] Clock frequency in Hz */
) {
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
- volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
+ uint32_t __iomem *pDependentClock = NULL;
uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */
uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
@@ -272,12 +272,12 @@
uint32_t desVcoHz = 0;
/* Get VCO frequencies */
- if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ if ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
uint64_t adjustFreq = 0;
vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
@@ -289,16 +289,16 @@
/* Desired VCO frequency */
desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ (((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
} else {
vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
}
vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
- ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ ((readl(&pChipcHw->PLLPreDivider2) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
switch (clock) {
@@ -307,8 +307,7 @@
{
REG_LOCAL_IRQ_SAVE;
/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
- pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
- << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ writel((readl(&pChipcHw->DDRClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->DDRClock);
REG_LOCAL_IRQ_RESTORE;
}
pPLLReg = &pChipcHw->DDRClock;
@@ -329,8 +328,7 @@
/* Configure the VPM:BUS ratio settings */
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
- << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT), &pChipcHw->VPMClock);
REG_LOCAL_IRQ_RESTORE;
}
pPLLReg = &pChipcHw->VPMClock;
@@ -428,9 +426,9 @@
/* For DDR settings use only the PLL divider clock */
if (pPLLReg == &pChipcHw->DDRClock) {
/* Set M1DIV for PLL1, which controls the DDR clock */
- reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+ reg32_write(&pChipcHw->PLLDivider, (readl(&pChipcHw->PLLDivider) & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
/* Calculate expected frequency */
- freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ freq = chipcHw_divide(vcoHz, (((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) ? ((readl(&pChipcHw->PLLDivider) & 0xFF000000) >> 24) : 256));
} else {
/* From chip revision number B0, LCD clock is internally divided by 2 */
if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
@@ -441,7 +439,7 @@
reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
/* Calculate expected frequency */
- freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ freq = chipcHw_divide(vcoHz, ((readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (readl(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
}
/* Wait for for atleast 200ns as per the protocol to change frequency */
udelay(1);
@@ -460,16 +458,16 @@
if (pDependentClock) {
switch (dependentClockType) {
case PLL_CLOCK:
- divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+ divider = chipcHw_divide(chipcHw_divide (desVcoHz, (readl(pDependentClock) & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
break;
case NON_PLL_CLOCK:
{
uint32_t sourceClock = 0;
- if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ if (pDependentClock == &pChipcHw->ACLKClock) {
sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
} else {
- uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ uint32_t div = readl(pDependentClock) & chipcHw_REG_DIV_CLOCK_DIV_MASK;
sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
}
divider = chipcHw_divide(sourceClock, freq);
@@ -483,7 +481,7 @@
if (divider) {
REG_LOCAL_IRQ_SAVE;
/* Set the divider to obtain the required frequency */
- *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+ writel((readl(pClockCtrl) & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK), pClockCtrl);
REG_LOCAL_IRQ_RESTORE;
return freq;
}
@@ -515,25 +513,26 @@
int count = 0;
for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
- phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+ phaseControl = (readl(&pChipcHw->VPMClock) & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
phaseValue = 0;
prevPhaseComp = 0;
/* Step 1: Look for falling PH_COMP transition */
/* Read the contents of VPM Clock resgister */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
do {
/* Store previous value of phase comparator */
prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Read the contents of VPM Clock resgister. */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
phaseControl = (0x3F & (phaseControl - 1));
@@ -557,12 +556,13 @@
for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
phaseControl = (0x3F & (phaseControl + 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
@@ -581,12 +581,13 @@
for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
phaseControl = (0x3F & (phaseControl - 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
@@ -605,12 +606,13 @@
for (count = 0; (count < 5); count++) {
phaseControl = (0x3F & (phaseControl - 1));
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
- phaseValue = pChipcHw->VPMClock;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
+ phaseValue = readl(&pChipcHw->VPMClock);
/* Count number of adjustment made */
adjustCount++;
}
@@ -631,14 +633,14 @@
/* Store previous value of phase comparator */
prevPhaseComp = phaseValue;
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^=
- chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Read the contents of VPM Clock resgister. */
- phaseValue = pChipcHw->VPMClock;
+ phaseValue = readl(&pChipcHw->VPMClock);
if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
phaseControl = (0x3F & (phaseControl - 1));
@@ -661,13 +663,13 @@
}
/* For VPM Phase should be perfectly aligned. */
- phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+ phaseControl = (((readl(&pChipcHw->VPMClock) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+ writel((readl(&pChipcHw->VPMClock) & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT), &pChipcHw->VPMClock);
/* Load new phase value */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
REG_LOCAL_IRQ_RESTORE;
}
@@ -697,7 +699,7 @@
int adjustCount = 0;
/* Disable VPM access */
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
/* Disable HW VPM phase alignment */
chipcHw_vpmHwPhaseAlignDisable();
/* Enable SW VPM phase alignment */
@@ -715,23 +717,24 @@
phaseControl--;
} else {
/* Enable VPM access */
- pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
/* Return adjust count */
return adjustCount;
}
/* Change the value of PH_CTRL. */
- reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ reg32_write(&pChipcHw->VPMClock,
+ (readl(&pChipcHw->VPMClock) & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
/* Wait atleast 20 ns */
udelay(1);
/* Toggle the LOAD_CH after phase control is written. */
- pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ writel(readl(&pChipcHw->VPMClock) ^ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE, &pChipcHw->VPMClock);
/* Count adjustment */
adjustCount++;
}
}
/* Disable VPM access */
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE, &pChipcHw->Spare1);
return -1;
}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
index 367df75..8377d80 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -26,15 +26,15 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/export.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/reg.h>
-#include <csp/delay.h>
+#include <mach/csp/reg.h>
+#include <linux/delay.h>
/* ---- Private Constants and Types --------------------------------------- */
/*
@@ -73,9 +73,9 @@
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig2 =
- chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET,
+ &pChipcHw->PLLConfig2);
pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
@@ -87,28 +87,30 @@
chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
/* Enable CHIPC registers to control the PLL */
- pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+ writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
/* Set pre divider to get desired VCO frequency */
- pChipcHw->PLLPreDivider2 = pllPreDivider2;
+ writel(pllPreDivider2, &pChipcHw->PLLPreDivider2);
/* Set NDIV Frac */
- pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ writel(chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider2);
/* This has to be removed once the default values are fixed for PLL2. */
- pChipcHw->PLLControl12 = 0x38000700;
- pChipcHw->PLLControl22 = 0x00000015;
+ writel(0x38000700, &pChipcHw->PLLControl12);
+ writel(0x00000015, &pChipcHw->PLLControl22);
/* Reset PLL2 */
if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
chipcHw_REG_PLL_CONFIG_A_RESET |
chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
} else {
- pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
chipcHw_REG_PLL_CONFIG_A_RESET |
chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
}
REG_LOCAL_IRQ_RESTORE;
}
@@ -119,22 +121,25 @@
{
REG_LOCAL_IRQ_SAVE;
/* Remove analog reset and Power on the PLL */
- pChipcHw->PLLConfig2 &=
+ writel(readl(&pChipcHw->PLLConfig2) &
~(chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN),
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
/* Wait until PLL is locked */
- while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ while (!(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
;
{
REG_LOCAL_IRQ_SAVE;
/* Remove digital reset */
- pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ writel(readl(&pChipcHw->PLLConfig2) &
+ ~chipcHw_REG_PLL_CONFIG_D_RESET,
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
@@ -157,9 +162,9 @@
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig =
- chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET,
+ &pChipcHw->PLLConfig);
/* Setting VCO frequency */
if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
pllPreDivider =
@@ -182,30 +187,22 @@
}
/* Enable CHIPC registers to control the PLL */
- pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+ writel(readl(&pChipcHw->PLLStatus) | chipcHw_REG_PLL_STATUS_CONTROL_ENABLE, &pChipcHw->PLLStatus);
/* Set pre divider to get desired VCO frequency */
- pChipcHw->PLLPreDivider = pllPreDivider;
+ writel(pllPreDivider, &pChipcHw->PLLPreDivider);
/* Set NDIV Frac */
if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
- pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
- chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+ writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f_SS, &pChipcHw->PLLDivider);
} else {
- pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
- chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ writel(chipcHw_REG_PLL_DIVIDER_M1DIV | chipcHw_REG_PLL_DIVIDER_NDIV_f, &pChipcHw->PLLDivider);
}
/* Reset PLL1 */
if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
- pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
} else {
- pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
- chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(chipcHw_REG_PLL_CONFIG_D_RESET | chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_VCO_800_1600 | chipcHw_REG_PLL_CONFIG_POWER_DOWN, &pChipcHw->PLLConfig);
}
REG_LOCAL_IRQ_RESTORE;
@@ -216,22 +213,19 @@
{
REG_LOCAL_IRQ_SAVE;
/* Remove analog reset and Power on the PLL */
- pChipcHw->PLLConfig &=
- ~(chipcHw_REG_PLL_CONFIG_A_RESET |
- chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ writel(readl(&pChipcHw->PLLConfig) & ~(chipcHw_REG_PLL_CONFIG_A_RESET | chipcHw_REG_PLL_CONFIG_POWER_DOWN), &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
/* Wait until PLL is locked */
- while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
- || !(pChipcHw->
- PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ while (!(readl(&pChipcHw->PLLStatus) & chipcHw_REG_PLL_STATUS_LOCKED)
+ || !(readl(&pChipcHw->PLLStatus2) & chipcHw_REG_PLL_STATUS_LOCKED))
;
/* Remove digital reset */
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ writel(readl(&pChipcHw->PLLConfig) & ~chipcHw_REG_PLL_CONFIG_D_RESET, &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
}
@@ -267,11 +261,7 @@
chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
- pChipcHw->ACLKClock =
- (pChipcHw->
- ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
- armBusRatio &
- chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+ writel((readl(&pChipcHw->ACLKClock) & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> armBusRatio & chipcHw_REG_ACLKClock_CLK_DIV_MASK), &pChipcHw->ACLKClock);
/* Set various core component frequencies. The order in which this is done is important for some. */
/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
index 2671d88..f95ce91 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -13,11 +13,11 @@
*****************************************************************************/
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
+#include <linux/types.h>
#include <mach/csp/chipcHw_def.h>
#include <mach/csp/chipcHw_inline.h>
-#include <csp/intcHw.h>
-#include <csp/cache.h>
+#include <mach/csp/intcHw_reg.h>
+#include <asm/cacheflush.h>
/* ---- Private Constants and Types --------------------------------------- */
/* ---- Private Variables ------------------------------------------------- */
@@ -50,17 +50,18 @@
chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
}
/* Bypass the PLL clocks before reboot */
- pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
- pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+ writel(readl(&pChipcHw->UARTClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT,
+ &pChipcHw->UARTClock);
+ writel(readl(&pChipcHw->SPIClock) | chipcHw_REG_PLL_CLOCK_BYPASS_SELECT,
+ &pChipcHw->SPIClock);
/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
do {
- ((uint32_t *) MM_IO_BASE_ARAM)[i] =
- ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+ writel(((uint32_t *) &chipcHw_reset_run_from_aram)[i], ((uint32_t __iomem *) MM_IO_BASE_ARAM) + i);
i++;
- } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
+ } while (readl(((uint32_t __iomem*) MM_IO_BASE_ARAM) + i - 1) != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
- CSP_CACHE_FLUSH_ALL;
+ flush_cache_all();
/* run the function from ARAM */
runFunc();
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
index 6b9be2e..547f746 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -25,11 +25,11 @@
/****************************************************************************/
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/string.h>
-#include <stddef.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/stddef.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/csp/dmacHw_reg.h>
#include <mach/csp/dmacHw_priv.h>
#include <mach/csp/chipcHw_inline.h>
@@ -55,33 +55,32 @@
) {
uint32_t val = 0;
dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
- dmacHw_MISC_t *pMiscReg =
- (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+ dmacHw_MISC_t __iomem *pMiscReg = (void __iomem *)dmacHw_REG_MISC_BASE(pCblk->module);
switch (pCblk->channel) {
case 0:
- val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm2.lo) & 0x70000000) >> 28;
break;
case 1:
- val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm3.hi) & 0x70000000) >> 28;
break;
case 2:
- val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm3.lo) & 0x70000000) >> 28;
break;
case 3:
- val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm4.hi) & 0x70000000) >> 28;
break;
case 4:
- val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm4.lo) & 0x70000000) >> 28;
break;
case 5:
- val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm5.hi) & 0x70000000) >> 28;
break;
case 6:
- val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm5.lo) & 0x70000000) >> 28;
break;
case 7:
- val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+ val = (readl(&pMiscReg->CompParm6.hi) & 0x70000000) >> 28;
break;
}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index a1f3283..fe43869 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -26,10 +26,10 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <stddef.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/csp/dmacHw_reg.h>
#include <mach/csp/dmacHw_priv.h>
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 16225e4..dc4137f 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -26,10 +26,10 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/stdint.h>
+#include <linux/errno.h>
+#include <linux/types.h>
-#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw.h>
#include <mach/csp/tmrHw_reg.h>
#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
deleted file mode 100644
index f01da87..0000000
--- a/arch/arm/mach-bcmring/include/cfg_global.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _CFG_GLOBAL_H_
-#define _CFG_GLOBAL_H_
-
-#include <cfg_global_defines.h>
-
-#define CFG_GLOBAL_CHIP BCM11107
-#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
-#define CFG_GLOBAL_CHIP_REV 0xB0
-#define CFG_GLOBAL_RAM_SIZE 0x10000000
-#define CFG_GLOBAL_RAM_BASE 0x00000000
-#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
-
-#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
deleted file mode 100644
index caa20e5..0000000
--- a/arch/arm/mach-bcmring/include/csp/cache.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_CACHE_H
-#define CSP_CACHE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <asm/cacheflush.h>
-
-#define CSP_CACHE_FLUSH_ALL flush_cache_all()
-
-#else
-
-#define CSP_CACHE_FLUSH_ALL
-
-#endif
-
-#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
deleted file mode 100644
index 8b3d803..0000000
--- a/arch/arm/mach-bcmring/include/csp/delay.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_DELAY_H
-#define CSP_DELAY_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-/* Some CSP routines require use of the following delay routines. Use the OS */
-/* version if available, otherwise use a CSP specific definition. */
-/* void udelay(unsigned long usecs); */
-/* void mdelay(unsigned long msecs); */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
- #include <linux/delay.h>
-#else
- #include <mach/csp/delay.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
deleted file mode 100644
index 51357dd..0000000
--- a/arch/arm/mach-bcmring/include/csp/errno.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_ERRNO_H
-#define CSP_ERRNO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if defined(__KERNEL__)
-#include <linux/errno.h>
-#elif defined(CSP_SIMULATION)
-#include <asm-generic/errno.h>
-#else
-#include <errno.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
deleted file mode 100644
index 1c639c8..0000000
--- a/arch/arm/mach-bcmring/include/csp/intcHw.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-/****************************************************************************/
-/**
-* @file intcHw.h
-*
-* @brief generic interrupt controller API
-*
-* @note
-* None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_H
-#define _INTCHW_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/intcHw_reg.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask);
-static inline void intcHw_irq_enable(void *basep, uint32_t mask);
-
-#endif /* _INTCHW_H */
-
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
deleted file mode 100644
index c30d2a5..0000000
--- a/arch/arm/mach-bcmring/include/csp/module.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_MODULE_H
-#define CSP_MODULE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
- #include <linux/module.h>
-#else
- #define EXPORT_SYMBOL(symbol)
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
deleted file mode 100644
index b9d7e07..0000000
--- a/arch/arm/mach-bcmring/include/csp/secHw.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-* @file secHw.h
-*
-* @brief Definitions for accessing low level security features
-*
-*/
-/****************************************************************************/
-#ifndef SECHW_H
-#define SECHW_H
-
-typedef void (*secHw_FUNC_t) (void);
-
-typedef enum {
- secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */
- secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */
-} secHw_MODE;
-
-/****************************************************************************/
-/**
-* @brief Requesting to execute the function in secure mode
-*
-* This function requests the given function to run in secure mode
-*
-*/
-/****************************************************************************/
-void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */
- );
-
-/****************************************************************************/
-/**
-* @brief Sets the mode
-*
-* his function sets the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_SetMode(secHw_MODE /* Processor mode */
- );
-
-/****************************************************************************/
-/**
-* @brief Get the current mode
-*
-* This function retieves the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_GetMode(secHw_MODE *);
-
-#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
deleted file mode 100644
index 3a8718b..0000000
--- a/arch/arm/mach-bcmring/include/csp/stdint.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_STDINT_H
-#define CSP_STDINT_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
deleted file mode 100644
index ad9e400..0000000
--- a/arch/arm/mach-bcmring/include/csp/string.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-
-#ifndef CSP_STRING_H
-#define CSP_STRING_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
- #include <linux/string.h>
-#else
- #include <string.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_STRING_H */
-
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/mach/cfg_global.h
similarity index 74%
rename from arch/arm/mach-bcmring/include/cfg_global_defines.h
rename to arch/arm/mach-bcmring/include/mach/cfg_global.h
index b5beb0b3..449133e 100644
--- a/arch/arm/mach-bcmring/include/cfg_global_defines.h
+++ b/arch/arm/mach-bcmring/include/mach/cfg_global.h
@@ -38,3 +38,14 @@
#define IMAGE_HEADER_SIZE_CHECKSUM 4
#endif
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#define CFG_GLOBAL_CHIP BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV 0xB0
+#define CFG_GLOBAL_RAM_SIZE 0x10000000
+#define CFG_GLOBAL_RAM_BASE 0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
index 933ce68..0a89e0c 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -17,7 +17,7 @@
/* ---- Include Files ---------------------------------------------------- */
#include <mach/csp/cap.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
/* ---- Public Constants and Types --------------------------------------- */
#define CAP_CONFIG0_VPM_DIS 0x00000001
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
index 1619733..39f09cb 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -17,9 +17,9 @@
/* ---- Include Files ----------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/errno.h>
-#include <csp/reg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <mach/csp/reg.h>
#include <mach/csp/chipcHw_reg.h>
/* ---- Public Constants and Types ---------------------------------------- */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
index 03238c2..a66f3f7 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -17,8 +17,8 @@
/* ---- Include Files ----------------------------------------------------- */
-#include <csp/errno.h>
-#include <csp/reg.h>
+#include <linux/errno.h>
+#include <mach/csp/reg.h>
#include <mach/csp/chipcHw_reg.h>
#include <mach/csp/chipcHw_def.h>
@@ -47,7 +47,7 @@
/****************************************************************************/
static inline uint32_t chipcHw_getChipId(void)
{
- return pChipcHw->ChipId;
+ return readl(&pChipcHw->ChipId);
}
/****************************************************************************/
@@ -59,15 +59,16 @@
/****************************************************************************/
static inline void chipcHw_enableSpreadSpectrum(void)
{
- if ((pChipcHw->
- PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ if ((readl(&pChipcHw->
+ PLLPreDivider) & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
- ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
- (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ writel((0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
(ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
- ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
- ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
- ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT),
+ &ddrcReg_PHY_ADDR_CTL_REGP->ssCfg);
+ writel(readl(&ddrcReg_PHY_ADDR_CTL_REGP->ssCtl) |
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE,
+ &ddrcReg_PHY_ADDR_CTL_REGP->ssCtl);
}
}
@@ -93,8 +94,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_getChipProductId(void)
{
- return (pChipcHw->
- ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ return (readl(&pChipcHw->
+ ChipId) & chipcHw_REG_CHIPID_BASE_MASK) >>
chipcHw_REG_CHIPID_BASE_SHIFT;
}
@@ -109,7 +110,7 @@
/****************************************************************************/
static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
{
- return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+ return readl(&pChipcHw->ChipId) & chipcHw_REG_CHIPID_REV_MASK;
}
/****************************************************************************/
@@ -156,7 +157,7 @@
/****************************************************************************/
static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
{
- return pChipcHw->BusIntfClock;
+ return readl(&pChipcHw->BusIntfClock);
}
/****************************************************************************/
@@ -215,8 +216,9 @@
/* Deassert module soft reset */
REG_LOCAL_IRQ_SAVE;
- pChipcHw->SoftReset1 ^= ctrl1;
- pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ writel(readl(&pChipcHw->SoftReset1) ^ ctrl1, &pChipcHw->SoftReset1);
+ writel(readl(&pChipcHw->SoftReset2) ^ (ctrl2 &
+ (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2);
REG_LOCAL_IRQ_RESTORE;
}
@@ -227,9 +229,10 @@
uint32_t unhold = 0;
REG_LOCAL_IRQ_SAVE;
- pChipcHw->SoftReset1 |= ctrl1;
+ writel(readl(&pChipcHw->SoftReset1) | ctrl1, &pChipcHw->SoftReset1);
/* Mask out unhold request bits */
- pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ writel(readl(&pChipcHw->SoftReset2) | (ctrl2 &
+ (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)), &pChipcHw->SoftReset2);
/* Process unhold requests */
if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
@@ -246,7 +249,7 @@
if (unhold) {
/* Make sure unhold request is effective */
- pChipcHw->SoftReset1 &= ~unhold;
+ writel(readl(&pChipcHw->SoftReset1) & ~unhold, &pChipcHw->SoftReset1);
}
REG_LOCAL_IRQ_RESTORE;
}
@@ -307,7 +310,7 @@
/****************************************************************************/
static inline uint32_t chipcHw_getStickyBits(void)
{
- return pChipcHw->Sticky;
+ return readl(&pChipcHw->Sticky);
}
/****************************************************************************/
@@ -328,7 +331,7 @@
bits |= chipcHw_REG_STICKY_POR_BROM;
} else {
uint32_t sticky;
- sticky = pChipcHw->Sticky;
+ sticky = readl(pChipcHw->Sticky);
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
@@ -355,7 +358,7 @@
bits |= chipcHw_REG_STICKY_GENERAL_5;
}
}
- pChipcHw->Sticky = bits;
+ writel(bits, pChipcHw->Sticky);
REG_LOCAL_IRQ_RESTORE;
}
@@ -377,7 +380,7 @@
(chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
- uint32_t sticky = pChipcHw->Sticky;
+ uint32_t sticky = readl(&pChipcHw->Sticky);
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
@@ -410,7 +413,7 @@
mask &= ~chipcHw_REG_STICKY_GENERAL_5;
}
}
- pChipcHw->Sticky = bits | mask;
+ writel(bits | mask, &pChipcHw->Sticky);
REG_LOCAL_IRQ_RESTORE;
}
@@ -426,7 +429,7 @@
/****************************************************************************/
static inline uint32_t chipcHw_getSoftStraps(void)
{
- return pChipcHw->SoftStraps;
+ return readl(&pChipcHw->SoftStraps);
}
/****************************************************************************/
@@ -456,7 +459,7 @@
/****************************************************************************/
static inline uint32_t chipcHw_getPinStraps(void)
{
- return pChipcHw->PinStraps;
+ return readl(&pChipcHw->PinStraps);
}
/****************************************************************************/
@@ -671,9 +674,9 @@
/****************************************************************************/
static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
{
- return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ return (readl(chipcHw_REG_GPIO_MUX(pin))) &
(chipcHw_REG_GPIO_MUX_MASK <<
- chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin)) >>
chipcHw_REG_GPIO_MUX_POSITION(pin);
}
@@ -841,8 +844,8 @@
static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
chipcHw_OPTYPE_e type, int mode)
{
- volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
- volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ uint32_t __iomem *pPLLReg = NULL;
+ uint32_t __iomem *pClockCtrl = NULL;
switch (clock) {
case chipcHw_CLOCK_DDR:
@@ -1071,7 +1074,7 @@
/****************************************************************************/
static inline int chipcHw_isSoftwareStrapsEnable(void)
{
- return pChipcHw->SoftStraps & 0x00000001;
+ return readl(&pChipcHw->SoftStraps) & 0x00000001;
}
/****************************************************************************/
@@ -1138,7 +1141,7 @@
/****************************************************************************/
static inline int chipcHw_isPllTestEnable(void)
{
- return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+ return readl(&pChipcHw->PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
@@ -1147,7 +1150,7 @@
/****************************************************************************/
static inline int chipcHw_isPll2TestEnable(void)
{
- return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+ return readl(&pChipcHw->PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
@@ -1183,8 +1186,8 @@
/****************************************************************************/
static inline uint8_t chipcHw_getPllTestSelected(void)
{
- return (uint8_t) ((pChipcHw->
- PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ return (uint8_t) ((readl(&pChipcHw->
+ PLLConfig) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
@@ -1194,8 +1197,8 @@
/****************************************************************************/
static inline uint8_t chipcHw_getPll2TestSelected(void)
{
- return (uint8_t) ((pChipcHw->
- PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ return (uint8_t) ((readl(&pChipcHw->
+ PLLConfig2) & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
@@ -1208,7 +1211,8 @@
static inline void chipcHw_pll1Disable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(readl(&pChipcHw->PLLConfig) | chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1221,7 +1225,8 @@
static inline void chipcHw_pll2Disable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ writel(readl(&pChipcHw->PLLConfig2) | chipcHw_REG_PLL_CONFIG_POWER_DOWN,
+ &pChipcHw->PLLConfig2);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1233,7 +1238,8 @@
static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ writel(readl(&pChipcHw->Spare1) | chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE,
+ &pChipcHw->Spare1);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1245,7 +1251,8 @@
static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ writel(readl(&pChipcHw->Spare1) & ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE,
+ &pChipcHw->Spare1);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1333,7 +1340,8 @@
static inline void chipcHw_vpmSwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ writel(readl(&pChipcHw->VPMPhaseCtrl1) | chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE,
+ &pChipcHw->VPMPhaseCtrl1);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1372,7 +1380,8 @@
static inline void chipcHw_vpmHwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
- pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ writel(readl(&pChipcHw->VPMPhaseCtrl1) & ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE,
+ &pChipcHw->VPMPhaseCtrl1);
REG_LOCAL_IRQ_RESTORE;
}
@@ -1474,8 +1483,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
@@ -1488,8 +1497,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
@@ -1500,8 +1509,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
}
@@ -1513,8 +1522,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
}
@@ -1526,8 +1535,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_getDdrPhaseControl(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
}
@@ -1539,8 +1548,8 @@
/****************************************************************************/
static inline uint32_t chipcHw_getVpmPhaseControl(void)
{
- return (pChipcHw->
- PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ return (readl(&pChipcHw->
+ PhaseAlignStatus) & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
}
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
index b162448..26f5d0e 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -24,7 +24,7 @@
#define CHIPCHW_REG_H
#include <mach/csp/mm_io.h>
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/csp/ddrcReg.h>
#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
@@ -131,8 +131,8 @@
uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
} chipcHw_REG_t;
-#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
-#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+#define pChipcHw ((chipcHw_REG_t __iomem *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical (MM_ADDR_IO_CHIPC)
#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
#define chipcHw_REG_CHIPID_BASE_SHIFT 12
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
index f1b68e2..39da2c1 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -30,8 +30,8 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <csp/stdint.h>
+#include <mach/csp/reg.h>
+#include <linux/types.h>
#include <mach/csp/mm_io.h>
@@ -416,7 +416,7 @@
} ddrcReg_PHY_ADDR_CTL_REG_t;
#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
-#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t __iomem*) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
/* @todo These SS definitions are duplicates of ones below */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h
similarity index 99%
rename from arch/arm/mach-bcmring/include/csp/dmacHw.h
rename to arch/arm/mach-bcmring/include/mach/csp/dmacHw.h
index e6a1dc4..9dc90f4 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw.h
@@ -23,9 +23,9 @@
#ifndef _DMACHW_H
#define _DMACHW_H
-#include <stddef.h>
+#include <linux/stddef.h>
-#include <csp/stdint.h>
+#include <linux/types.h>
#include <mach/csp/dmacHw_reg.h>
/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index d67e2f8..9d9455e 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -24,7 +24,7 @@
#ifndef _DMACHW_PRIV_H
#define _DMACHW_PRIV_H
-#include <csp/stdint.h>
+#include <linux/types.h>
/* Data type for DMA Link List Item */
typedef struct {
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index f1ecf96..7cd0aaf 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -24,7 +24,7 @@
#ifndef _DMACHW_REG_H
#define _DMACHW_REG_H
-#include <csp/stdint.h>
+#include <linux/types.h>
#include <mach/csp/mm_io.h>
/* Data type for 64 bit little endian register */
@@ -121,75 +121,75 @@
} dmacHw_MISC_t;
/* Base registers */
-#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
-#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+#define dmacHw_0_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char __iomem*) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
extern uint32_t dmaChannelCount_0;
extern uint32_t dmaChannelCount_1;
/* Define channel specific registers */
-#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t __iomem*) ((char __iomem*)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
/* Raw interrupt status registers */
-#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
-#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
-#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
-#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
-#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
-#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+#define dmacHw_REG_INT_RAW_BASE(module) ((char __iomem *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t __iomem *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
/* Interrupt status registers */
-#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
-#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
-#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
-#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
-#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
-#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+#define dmacHw_REG_INT_STAT_BASE(module) ((char __iomem*)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t __iomem *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
/* Interrupt status registers */
-#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
-#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
-#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
-#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
-#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
-#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+#define dmacHw_REG_INT_MASK_BASE(module) ((char __iomem*)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t __iomem *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
/* Interrupt clear registers */
-#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
-#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
-#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
-#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
-#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
-#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
-#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char __iomem*)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t __iomem *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
/* Software handshaking registers */
-#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
-#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+#define dmacHw_REG_SW_HS_BASE(module) ((char __iomem*)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t __iomem *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
/* Miscellaneous registers */
-#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
-#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
-#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
-#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
-#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
-#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
-#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
-#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
-#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
-#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
-#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
-#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
-#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
-#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
-#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+#define dmacHw_REG_MISC_BASE(module) ((char __iomem*)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t __iomem*) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
/* Channel control registers */
#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
index cfa91be..27f59dd 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -18,7 +18,7 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include <mach/csp/cap_inline.h>
#if defined(__KERNEL__)
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
index 0aeb6a6..f59db25 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -27,8 +27,8 @@
#define _INTCHW_REG_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/reg.h>
+#include <linux/types.h>
+#include <mach/csp/reg.h>
#include <mach/csp/mm_io.h>
/* ---- Public Constants and Types --------------------------------------- */
@@ -37,9 +37,9 @@
#define INTCHW_NUM_INTC 3
/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
-#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0)
-#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1)
-#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC)
+#define INTCHW_INTC0 (MM_IO_BASE_INTC0)
+#define INTCHW_INTC1 (MM_IO_BASE_INTC1)
+#define INTCHW_SINTC (MM_IO_BASE_SINTC)
/* INTC0 - interrupt controller 0 */
#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */
@@ -232,15 +232,15 @@
/* ---- Public Variable Externs ------------------------------------------ */
/* ---- Public Function Prototypes --------------------------------------- */
/* Clear one or more IRQ interrupts. */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+static inline void intcHw_irq_disable(void __iomem *basep, uint32_t mask)
{
- __REG32(basep + INTCHW_INTENCLEAR) = mask;
+ writel(mask, basep + INTCHW_INTENCLEAR);
}
/* Enables one or more IRQ interrupts. */
-static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+static inline void intcHw_irq_enable(void __iomem *basep, uint32_t mask)
{
- __REG32(basep + INTCHW_INTENABLE) = mask;
+ writel(mask, basep + INTCHW_INTENABLE);
}
#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index ad58cf8..d571962 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -29,7 +29,7 @@
/* ---- Include Files ---------------------------------------------------- */
#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#endif
/* ---- Public Constants and Types --------------------------------------- */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
index de92ec6..47450c2 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -30,7 +30,7 @@
#include <mach/csp/mm_addr.h>
#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#endif
/* ---- Public Constants and Types --------------------------------------- */
@@ -49,7 +49,7 @@
#ifdef __ASSEMBLY__
#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
#else
-#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+#define MM_IO_PHYS_TO_VIRT(phys) (void __iomem *)(((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
#endif
#endif
@@ -60,8 +60,8 @@
#ifdef __ASSEMBLY__
#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
#else
-#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
- ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#define MM_IO_VIRT_TO_PHYS(virt) (((unsigned long)(virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+ ((((unsigned long)(virt) & 0x0F000000) << 4) | ((unsigned long)(virt) & 0xFFFFFF)))
#endif
#endif
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/mach/csp/reg.h
similarity index 81%
rename from arch/arm/mach-bcmring/include/csp/reg.h
rename to arch/arm/mach-bcmring/include/mach/csp/reg.h
index 56654d2..d9cbdca 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/reg.h
@@ -25,13 +25,14 @@
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
+#include <linux/types.h>
+#include <linux/io.h>
/* ---- Public Constants and Types --------------------------------------- */
-#define __REG32(x) (*((volatile uint32_t *)(x)))
-#define __REG16(x) (*((volatile uint16_t *)(x)))
-#define __REG8(x) (*((volatile uint8_t *) (x)))
+#define __REG32(x) (*((volatile uint32_t __iomem *)(x)))
+#define __REG16(x) (*((volatile uint16_t __iomem *)(x)))
+#define __REG8(x) (*((volatile uint8_t __iomem *) (x)))
/* Macros used to define a sequence of reserved registers. The start / end */
/* are byte offsets in the particular register definition, with the "end" */
@@ -84,31 +85,31 @@
#endif
-static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+static inline void reg32_modify_and(volatile uint32_t __iomem *reg, uint32_t value)
{
REG_LOCAL_IRQ_SAVE;
- *reg &= value;
+ __raw_writel(__raw_readl(reg) & value, reg);
REG_LOCAL_IRQ_RESTORE;
}
-static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+static inline void reg32_modify_or(volatile uint32_t __iomem *reg, uint32_t value)
{
REG_LOCAL_IRQ_SAVE;
- *reg |= value;
+ __raw_writel(__raw_readl(reg) | value, reg);
REG_LOCAL_IRQ_RESTORE;
}
-static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+static inline void reg32_modify_mask(volatile uint32_t __iomem *reg, uint32_t mask,
uint32_t value)
{
REG_LOCAL_IRQ_SAVE;
- *reg = (*reg & mask) | value;
+ __raw_writel((__raw_readl(reg) & mask) | value, reg);
REG_LOCAL_IRQ_RESTORE;
}
-static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+static inline void reg32_write(volatile uint32_t __iomem *reg, uint32_t value)
{
- *reg = value;
+ __raw_writel(value, reg);
}
#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
index 9cd6a03..55d3cd4 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -34,7 +34,7 @@
/****************************************************************************/
static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
) {
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
if (mask & 0x0000FFFF) {
regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
@@ -53,13 +53,13 @@
/****************************************************************************/
static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
) {
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
if (mask & 0x0000FFFF) {
- regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ writel(mask & 0x0000FFFF, ®p->reg[secHw_IDX_LS].setUnsecure);
}
if (mask & 0xFFFF0000) {
- regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ writel(mask >> 16, ®p->reg[secHw_IDX_MS].setUnsecure);
}
}
@@ -71,7 +71,7 @@
/****************************************************************************/
static inline uint32_t secHw_getStatus(void)
{
- secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+ secHw_REGS_t __iomem *regp = MM_IO_BASE_TZPC;
return (regp->reg[1].status << 16) + regp->reg[0].status;
}
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h
similarity index 99%
rename from arch/arm/mach-bcmring/include/csp/tmrHw.h
rename to arch/arm/mach-bcmring/include/mach/csp/tmrHw.h
index 2cbb530..1cc882a 100644
--- a/arch/arm/mach-bcmring/include/csp/tmrHw.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw.h
@@ -23,7 +23,7 @@
#ifndef _TMRHW_H
#define _TMRHW_H
-#include <csp/stdint.h>
+#include <linux/types.h>
typedef uint32_t tmrHw_ID_t; /* Timer ID */
typedef uint32_t tmrHw_COUNT_t; /* Timer count */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 7254378..13e0138 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -27,7 +27,7 @@
#include <linux/kernel.h>
#include <linux/semaphore.h>
-#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw.h>
#include <mach/timer.h>
/* ---- Constants and Types ---------------------------------------------- */
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index 6ae20a6..a0c92b4 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,7 @@
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
#include <mach/csp/mm_io.h>
/* Hardware addresses of major areas.
diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h
index 387376f..f8d51a8 100644
--- a/arch/arm/mach-bcmring/include/mach/reg_nand.h
+++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h
@@ -30,7 +30,7 @@
#define __ASM_ARCH_REG_NAND_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/reg_umi.h>
/* ---- Constants and Types ---------------------------------------------- */
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
index 0992842..56dd9de 100644
--- a/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -30,7 +30,7 @@
#define __ASM_ARCH_REG_UMI_H
/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
+#include <mach/csp/reg.h>
#include <mach/csp/mm_io.h>
/* ---- Constants and Types ---------------------------------------------- */
@@ -233,5 +233,5 @@
#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018
/* location within a page (512 byte) */
#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0
-#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
+#define REG_UMI_BCH_ERR_LOC_ADDR(index) (readl(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 1adec78e..33824a8 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -20,12 +20,12 @@
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
-#define IO_DESC(va, sz) { .virtual = va, \
+#define IO_DESC(va, sz) { .virtual = (unsigned long)va, \
.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
.length = sz, \
.type = MT_DEVICE }
-#define MEM_DESC(va, sz) { .virtual = va, \
+#define MEM_DESC(va, sz) { .virtual = (unsigned long)va, \
.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
.length = sz, \
.type = MT_MEMORY }
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
index af9c3d7..5941290 100644
--- a/arch/arm/mach-bcmring/timer.c
+++ b/arch/arm/mach-bcmring/timer.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <linux/module.h>
-#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw.h>
#include <mach/timer.h>
/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 6321567..bd54d7b 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -49,16 +49,6 @@
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = DOVE_PCIE0_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
- .length = DOVE_PCIE0_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = DOVE_PCIE1_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
- .length = DOVE_PCIE1_IO_SIZE,
- .type = MT_DEVICE,
},
};
@@ -289,7 +279,7 @@
printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init();
+ tauros2_init(0);
#endif
dove_setup_cpu_mbus();
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index d52b0ef..c91e300 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -50,14 +50,12 @@
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
-#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
-#define DOVE_PCIE0_IO_SIZE SZ_1M
+#define DOVE_PCIE0_IO_SIZE SZ_64K
#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
-#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
-#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
-#define DOVE_PCIE1_IO_SIZE SZ_1M
+#define DOVE_PCIE1_IO_BUS_BASE 0x00010000
+#define DOVE_PCIE1_IO_SIZE SZ_64K
/*
* Dove Core Registers Map
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
deleted file mode 100644
index 29c8b85..0000000
--- a/arch/arm/mach-dove/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "dove.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
- DOVE_PCIE0_IO_VIRT_BASE))
-
-#endif
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 47921b0..355332d 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -26,9 +26,8 @@
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
- char io_space_name[16];
char mem_space_name[16];
- struct resource res[2];
+ struct resource res;
};
static struct pcie_port pcie_port[2];
@@ -53,24 +52,10 @@
orion_pcie_setup(pp->base);
- /*
- * IORESOURCE_IO
- */
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d I/O", pp->index);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- if (pp->index == 0) {
- pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
- pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
- } else {
- pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
- pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
- }
- pp->res[0].flags = IORESOURCE_IO;
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+ if (pp->index == 0)
+ pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
+ else
+ pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
/*
* IORESOURCE_MEM
@@ -78,18 +63,18 @@
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
+ pp->res.name = pp->mem_space_name;
if (pp->index == 0) {
- pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+ pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1;
} else {
- pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+ pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1;
}
- pp->res[1].flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pp->res[1]))
+ pp->res.flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
return 1;
}
@@ -210,7 +195,7 @@
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
- memset(pp->res, 0, sizeof(pp->res));
+ memset(&pp->res, 0, sizeof(pp->res));
} else {
printk(KERN_INFO "link down, ignoring\n");
}
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 774533c..3b00e29 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -166,11 +166,6 @@
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
}
-static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
-}
-
static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
@@ -672,10 +667,6 @@
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 7),
}, {
- .name = "gps",
- .enable = exynos5_clk_ip_gps_ctrl,
- .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
- }, {
.name = "nfcon",
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 22),
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c72b675..9d1f3ac 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -131,7 +131,6 @@
#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
-#define EXYNOS5_PA_SYSMMU_GPS 0x12630000
#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 3e6aaa6..a42b369 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
-
+
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
@@ -26,6 +26,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "common.h"
@@ -175,11 +176,6 @@
.pfn = __phys_to_pfn(DC21285_PCI_IACK),
.length = PCIIACK_SIZE,
.type = MT_DEVICE,
- }, {
- .virtual = PCIO_BASE,
- .pfn = __phys_to_pfn(DC21285_PCI_IO),
- .length = PCIO_SIZE,
- .type = MT_DEVICE,
},
#endif
};
@@ -196,8 +192,10 @@
* Now, work out what we've got to map in addition on this
* platform.
*/
- if (footbridge_cfn_mode())
+ if (footbridge_cfn_mode()) {
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+ pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
+ }
}
void footbridge_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 9d62e33..a7cd2cf 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,8 @@
sys->mem_offset = DC21285_PCI_MEM;
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
+ pci_ioremap_io(0, DC21285_PCI_IO);
+
pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
@@ -298,7 +298,7 @@
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
if (mem_mask >= mem_size)
- break;
+ break;
/*
* These registers need to be set up whether we're the
@@ -350,14 +350,6 @@
"PCI data parity", NULL);
if (cfn_mode) {
- static struct resource csrio;
-
- csrio.flags = IORESOURCE_IO;
- csrio.name = "Footbridge";
-
- allocate_resource(&ioport_resource, &csrio, 128,
- 0xff00, 0xffff, 128, NULL, NULL);
-
/*
* Map our SDRAM at a known address in PCI space, just in case
* the firmware had other ideas. Using a nonzero base is
@@ -365,7 +357,7 @@
* in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
*/
*CSR_PCICSRBASE = 0xf4000000;
- *CSR_PCICSRIOBASE = csrio.start;
+ *CSR_PCICSRIOBASE = 0;
*CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET);
*CSR_PCIROMBASE = 0;
*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index e5acde2..c169f0c 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -17,7 +17,8 @@
/* For NetWinder debugging */
.macro addruart, rp, rv, tmp
mov \rp, #0x000003f8
- orr \rv, \rp, #0xff000000 @ virtual
+ orr \rv, \rp, #0xfe000000 @ virtual
+ orr \rv, \rv, #0x00e00000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
.endm
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index aba531ee..aba4638 100644
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -14,18 +14,10 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b) (a)
-#else
-#define MMU_IO(a, b) (b)
-#endif
-
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
-
/*
- * Translation of various region addresses to virtual addresses
+ * Translation of various i/o addresses to host addresses for !CONFIG_MMU
*/
+#define PCIO_BASE 0x7c000000
#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index afd542a..7ca5fe4 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -101,13 +101,8 @@
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
-
-config SOC_IMX53
- bool
- select SOC_IMX5
- select ARCH_MX5
- select ARCH_MX53
- select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX51
if ARCH_IMX_V4_V5
@@ -561,7 +556,6 @@
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
- select USE_OF
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
@@ -737,95 +731,19 @@
endchoice
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
+comment "Device tree only"
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
+config SOC_IMX53
+ bool "i.MX53 support"
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
+ select HAVE_CAN_FLEXCAN if CAN
+ select PINCTRL
+ select PINCTRL_IMX53
+
help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
+ This enables support for Freescale i.MX53 processor.
config SOC_IMX6Q
bool "i.MX6 Quad support"
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d004d37..895754a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -13,7 +13,7 @@
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o clk-busy.o
+ clk-pfd.o clk-busy.o clk.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -83,16 +83,9 @@
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf..c609676 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -39,8 +39,12 @@
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
- imx53-qsb.dtb imx53-smd.dtb
+
+dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
+ imx53-evk.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
+
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index ea13e61..cf65148 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -23,7 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/clkdev.h>
#include <linux/err.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index fdd8cc8..4431a62 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -222,10 +222,8 @@
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index cebc71d..177259b 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -234,10 +234,8 @@
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
- clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
- clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
/* i.mx35 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index db70d23..e5165a8 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -39,10 +39,10 @@
static const char *emi_slow_sel[] = { "main_bus", "ahb", };
static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4233d9e..3ec242f 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -157,6 +157,7 @@
};
static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, rom,
@@ -394,52 +395,24 @@
pr_err("i.MX6q clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[twd], NULL, "smp_twd");
- clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
- clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
- clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
- clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
- clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
- clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
- clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
- clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
- clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
- clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
- clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
- clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
- clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
- clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
- clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
- clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
- clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
- clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
- clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
- clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
- clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
- clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
- clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
- clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
- clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
- clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
- clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
+ /*
+ * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+ * We can not get the 100MHz from the pll2_pfd0_352m.
+ * So choose pll2_pfd2_396m as enfc_sel's parent.
+ */
+ clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
index 2d856f9..02be731 100644
--- a/arch/arm/mach-imx/clk-pllv1.c
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -6,7 +6,7 @@
#include <linux/err.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
+
#include "clk.h"
/**
@@ -29,8 +29,53 @@
unsigned long parent_rate)
{
struct clk_pllv1 *pll = to_clk_pllv1(hw);
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+ u32 reg;
+ unsigned long rate;
- return mxc_decode_pll(readl(pll->base), parent_rate);
+ reg = readl(pll->base);
+
+ /*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can be found on i.MX1,
+ * i.MX21, i.MX27 and i,MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+
+ mfi = (reg >> 10) & 0xf;
+ mfn = reg & 0x3ff;
+ mfd = (reg >> 16) & 0x3ff;
+ pd = (reg >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+ /*
+ * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number
+ */
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ mfn_abs = 0x400 - mfn;
+
+ rate = parent_rate * 2;
+ rate /= pd + 1;
+
+ ll = (unsigned long long)rate * mfn_abs;
+
+ do_div(ll, mfd + 1);
+
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ ll = -ll;
+
+ ll = (rate * mfi) + ll;
+
+ return ll;
}
struct clk_ops clk_pllv1_ops = {
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
new file mode 100644
index 0000000..f5e8be8
--- /dev/null
+++ b/arch/arm/mach-imx/clk.c
@@ -0,0 +1,3 @@
+#include <linux/spinlock.h>
+
+DEFINE_SPINLOCK(imx_ccm_lock);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 1bf64fe..5f2d8ac 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -3,7 +3,8 @@
#include <linux/spinlock.h>
#include <linux/clk-provider.h>
-#include <mach/clock.h>
+
+extern spinlock_t imx_ccm_lock;
struct clk *imx_clk_pllv1(const char *name, const char *parent,
void __iomem *base);
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
deleted file mode 100644
index 77e0db9..0000000
--- a/arch/arm/mach-imx/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata) \
- imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
- imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h
deleted file mode 100644
index 014aa98..0000000
--- a/arch/arm/mach-imx/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index d4067fe..f233b4b 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -13,7 +13,6 @@
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
@@ -44,27 +43,8 @@
{ /* sentinel */ }
};
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
- { /* sentinel */ }
-};
-
static void __init imx51_dt_init(void)
{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx51_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
of_platform_populate(NULL, of_default_bus_match_table,
imx51_auxdata_lookup, NULL);
}
@@ -79,7 +59,6 @@
};
static const char *imx51_dt_board_compat[] __initdata = {
- "fsl,imx51-babbage",
"fsl,imx51",
NULL
};
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c
similarity index 81%
rename from arch/arm/mach-imx/imx53-dt.c
rename to arch/arm/mach-imx/mach-imx53.c
index 1b7a2fc..29711e9 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -17,7 +17,6 @@
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
@@ -51,14 +50,6 @@
{ /* sentinel */ }
};
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
- { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
- { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
- { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
- { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
- { /* sentinel */ }
-};
-
static void __init imx53_qsb_init(void)
{
struct clk *clk;
@@ -74,20 +65,6 @@
static void __init imx53_dt_init(void)
{
- struct device_node *node;
- const struct of_device_id *of_id;
- void (*func)(void);
-
- pinctrl_provide_dummies();
-
- node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
- if (node) {
- of_id = of_match_node(imx53_iomuxc_of_match, node);
- func = of_id->data;
- func();
- of_node_put(node);
- }
-
if (of_machine_is_compatible("fsl,imx53-qsb"))
imx53_qsb_init();
@@ -105,10 +82,6 @@
};
static const char *imx53_dt_board_compat[] __initdata = {
- "fsl,imx53-ard",
- "fsl,imx53-evk",
- "fsl,imx53-qsb",
- "fsl,imx53-smd",
"fsl,imx53",
NULL
};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 045b3f6..692b4b1 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -22,7 +22,6 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/anatop.h>
@@ -100,7 +99,6 @@
clk_set_parent(cko1_sel, ahb);
rate = clk_round_rate(cko1, 16000000);
clk_set_rate(cko1, rate);
- clk_register_clkdev(cko1, NULL, "0-000a");
put_clk:
if (!IS_ERR(cko1_sel))
clk_put(cko1_sel);
@@ -159,12 +157,6 @@
static void __init imx6q_init_machine(void)
{
- /*
- * This should be removed when all imx6q boards have pinctrl
- * states for devices defined in device tree.
- */
- pinctrl_provide_dummies();
-
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
imx6q_sabrelite_init();
@@ -218,9 +210,6 @@
};
static const char *imx6q_dt_compat[] __initdata = {
- "fsl,imx6q-arm2",
- "fsl,imx6q-sabrelite",
- "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5d08533..8dc9d3e 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,7 +36,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
deleted file mode 100644
index 8d09c01..0000000
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
- /* board id */
- MX51_PAD_PCBID0,
- MX51_PAD_PCBID1,
- MX51_PAD_PCBID2,
-
- /* leds */
- MX51_PAD_CSI1_D9__GPIO3_13,
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
- MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
- /* power key */
- MX51_PAD_PWRKEY,
-
- /* reset */
- MX51_PAD_DI1_PIN13__GPIO3_2,
- MX51_PAD_GPIO1_4__GPIO1_4,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/* PCBID2 PCBID1 PCBID0 STATE
- 1 1 1 ER1:rev1.1
- 1 1 0 ER2:rev1.2
- 1 0 1 ER3:rev1.3
- 1 0 0 ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
- int id;
-
- /* things are taking time to settle */
- msleep(150);
-
- gpio_request(EFIKAMX_PCBID0, "pcbid0");
- gpio_direction_input(EFIKAMX_PCBID0);
- gpio_request(EFIKAMX_PCBID1, "pcbid1");
- gpio_direction_input(EFIKAMX_PCBID1);
- gpio_request(EFIKAMX_PCBID2, "pcbid2");
- gpio_direction_input(EFIKAMX_PCBID2);
-
- id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
- id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
- switch (id) {
- case 7:
- system_rev = 0x11;
- break;
- case 6:
- system_rev = 0x12;
- break;
- case 5:
- system_rev = 0x13;
- break;
- case 4:
- system_rev = 0x14;
- break;
- default:
- system_rev = 0x10;
- break;
- }
-
- if ((system_rev == 0x10)
- || (system_rev == 0x12)
- || (system_rev == 0x14)) {
- printk(KERN_WARNING
- "EfikaMX: Unsupported board revision 1.%u!\n",
- system_rev & 0xf);
- }
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
- {
- .name = "efikamx:green",
- .default_trigger = "default-on",
- .gpio = EFIKAMX_GREEN_LED,
- },
- {
- .name = "efikamx:red",
- .default_trigger = "ide-disk",
- .gpio = EFIKAMX_RED_LED,
- },
- {
- .name = "efikamx:blue",
- .default_trigger = "mmc0",
- .gpio = EFIKAMX_BLUE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikamx_leds_data __initconst = {
- .leds = mx51_efikamx_leds,
- .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKAMX_POWER_KEY,
- .type = EV_PWR,
- .desc = "Power Button (CM)",
- .wakeup = 1,
- .debounce_interval = 10, /* ms */
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
- .buttons = mx51_efikamx_powerkey,
- .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
- if (system_rev == 0x11)
- gpio_direction_output(EFIKAMX_RESET1_1, 0);
- else
- gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
- if (!IS_ERR(coincell))
- regulator_disable(coincell);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKAMX_POWEROFF, "poweroff");
- pm_power_off = mx51_efikamx_power_off;
-
- /* enable coincell charger. maybe need a small power driver ? */
- coincell = regulator_get(NULL, "coincell");
- if (!IS_ERR(coincell)) {
- regulator_set_voltage(coincell, 3000000, 3000000);
- regulator_enable(coincell);
- }
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikamx_init_late(void)
-{
- imx51_init_late();
- mx51_efikamx_power_init();
-}
-
-static void __init mx51_efikamx_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
- ARRAY_SIZE(mx51efikamx_pads));
- efika_board_common_init();
-
- mx51_efikamx_board_id();
-
- /* on < 1.2 boards both SD controllers are used */
- if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
- mx51_efikamx_leds[2].default_trigger = "mmc1";
- } else
- imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
- gpio_led_register_device(-1, &mx51_efikamx_leds_data);
- imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
- if (system_rev == 0x11) {
- gpio_request(EFIKAMX_RESET1_1, "reset");
- gpio_direction_output(EFIKAMX_RESET1_1, 1);
- } else {
- gpio_request(EFIKAMX_RESET, "reset");
- gpio_direction_output(EFIKAMX_RESET, 1);
- }
-
- /*
- * enable wifi by default only on mx
- * sb and mx have same wlan pin but the value to enable it are
- * different :/
- */
- gpio_request(EFIKA_WLAN_EN, "wlan_en");
- gpio_direction_output(EFIKA_WLAN_EN, 0);
- msleep(10);
-
- gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
- gpio_direction_output(EFIKA_WLAN_RESET, 0);
- msleep(10);
- gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
- .init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .timer = &mx51_efikamx_timer,
- .init_machine = mx51_efikamx_init,
- .init_late = mx51_efikamx_init_late,
- .restart = mx51_efikamx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
deleted file mode 100644
index fdbd181..0000000
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
- /* USB HOST2 */
- MX51_PAD_EIM_D16__USBH2_DATA0,
- MX51_PAD_EIM_D17__USBH2_DATA1,
- MX51_PAD_EIM_D18__USBH2_DATA2,
- MX51_PAD_EIM_D19__USBH2_DATA3,
- MX51_PAD_EIM_D20__USBH2_DATA4,
- MX51_PAD_EIM_D21__USBH2_DATA5,
- MX51_PAD_EIM_D22__USBH2_DATA6,
- MX51_PAD_EIM_D23__USBH2_DATA7,
- MX51_PAD_EIM_A24__USBH2_CLK,
- MX51_PAD_EIM_A25__USBH2_DIR,
- MX51_PAD_EIM_A26__USBH2_STP,
- MX51_PAD_EIM_A27__USBH2_NXT,
-
- /* leds */
- MX51_PAD_EIM_CS0__GPIO2_25,
- MX51_PAD_GPIO1_3__GPIO1_3,
-
- /* pcb id */
- MX51_PAD_EIM_CS3__GPIO2_28,
- MX51_PAD_EIM_CS4__GPIO2_29,
-
- /* lid */
- MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
- /* power key*/
- MX51_PAD_PWRKEY,
-
- /* wifi/bt button */
- MX51_PAD_DI1_PIN12__GPIO3_1,
-
- /* power off */
- MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
- /* wdog reset */
- MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
- /* BT */
- MX51_PAD_EIM_A17__GPIO2_11,
-
- MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
- iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
- mxc_iomux_v3_setup_pad(usbh2gpio);
- gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
- gpio_direction_output(EFIKASB_USBH2_STP, 0);
- msleep(1);
- gpio_set_value(EFIKASB_USBH2_STP, 1);
- msleep(1);
-
- gpio_free(EFIKASB_USBH2_STP);
- mxc_iomux_v3_setup_pad(usbh2stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
- .init = initialize_usbh2_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
- usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- if (usbh2_config.otg)
- imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
- {
- .name = "efikasb:green",
- .default_trigger = "default-on",
- .gpio = EFIKASB_GREEN_LED,
- .active_low = 1,
- },
- {
- .name = "efikasb:white",
- .default_trigger = "caps",
- .gpio = EFIKASB_WHITE_LED,
- },
-};
-
-static const struct gpio_led_platform_data
- mx51_efikasb_leds_data __initconst = {
- .leds = mx51_efikasb_leds,
- .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
- {
- .code = KEY_POWER,
- .gpio = EFIKASB_PWRKEY,
- .type = EV_KEY,
- .desc = "Power Button",
- .wakeup = 1,
- .active_low = 1,
- },
- {
- .code = SW_LID,
- .gpio = EFIKASB_LID,
- .type = EV_SW,
- .desc = "Lid Switch",
- .active_low = 1,
- },
- {
- .code = KEY_RFKILL,
- .gpio = EFIKASB_RFKILL,
- .type = EV_KEY,
- .desc = "rfkill",
- .active_low = 1,
- },
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
- .buttons = mx51_efikasb_keys,
- .nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
- .cd_gpio = EFIKASB_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
- gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_disable(pwgt2);
- regulator_disable(pwgt1);
- }
- gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
- pwgt1 = regulator_get(NULL, "pwgt1");
- pwgt2 = regulator_get(NULL, "pwgt2");
- if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
- regulator_enable(pwgt1);
- regulator_enable(pwgt2);
- }
- gpio_request(EFIKASB_POWEROFF, "poweroff");
- pm_power_off = mx51_efikasb_power_off;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static void __init mx51_efikasb_init_late(void)
-{
- imx51_init_late();
- mx51_efikasb_power_init();
-}
-
-/* 01 R1.3 board
- 10 R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
- int id;
-
- gpio_request(EFIKASB_PCBID0, "pcb id0");
- gpio_direction_input(EFIKASB_PCBID0);
- gpio_request(EFIKASB_PCBID1, "pcb id1");
- gpio_direction_input(EFIKASB_PCBID1);
-
- id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
- id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
- switch (id) {
- default:
- break;
- case 1:
- system_rev = 0x13;
- break;
- case 2:
- system_rev = 0x20;
- break;
- }
-}
-
-static void __init efikasb_board_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
- ARRAY_SIZE(mx51efikasb_pads));
- efika_board_common_init();
-
- mx51_efikasb_board_id();
- mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
- imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
- gpio_led_register_device(-1, &mx51_efikasb_leds_data);
- imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
- .init = mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_machine = efikasb_board_init,
- .init_late = mx51_efikasb_init_late,
- .timer = &mx51_efikasb_timer,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 6c28e65..0000000
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
-#define ARD_HOME IMX_GPIO_NR(5, 10)
-#define ARD_BACK IMX_GPIO_NR(5, 11)
-#define ARD_PROG IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
- /* UART1 */
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
- /* WEIM for CS1 */
- MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
- MX53_PAD_EIM_D16__EMI_WEIM_D_16,
- MX53_PAD_EIM_D17__EMI_WEIM_D_17,
- MX53_PAD_EIM_D18__EMI_WEIM_D_18,
- MX53_PAD_EIM_D19__EMI_WEIM_D_19,
- MX53_PAD_EIM_D20__EMI_WEIM_D_20,
- MX53_PAD_EIM_D21__EMI_WEIM_D_21,
- MX53_PAD_EIM_D22__EMI_WEIM_D_22,
- MX53_PAD_EIM_D23__EMI_WEIM_D_23,
- MX53_PAD_EIM_D24__EMI_WEIM_D_24,
- MX53_PAD_EIM_D25__EMI_WEIM_D_25,
- MX53_PAD_EIM_D26__EMI_WEIM_D_26,
- MX53_PAD_EIM_D27__EMI_WEIM_D_27,
- MX53_PAD_EIM_D28__EMI_WEIM_D_28,
- MX53_PAD_EIM_D29__EMI_WEIM_D_29,
- MX53_PAD_EIM_D30__EMI_WEIM_D_30,
- MX53_PAD_EIM_D31__EMI_WEIM_D_31,
- MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
- MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
- MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
- MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
- MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
- MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
- MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
- MX53_PAD_EIM_OE__EMI_WEIM_OE,
- MX53_PAD_EIM_RW__EMI_WEIM_RW,
- MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
- /* SDHC1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
- MX53_PAD_GPIO_1__GPIO1_1,
- MX53_PAD_GPIO_9__GPIO1_9,
- /* I2C2 */
- MX53_PAD_EIM_EB2__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* I2C3 */
- MX53_PAD_GPIO_3__I2C3_SCL,
- MX53_PAD_GPIO_16__I2C3_SDA,
- /* GPIO */
- MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
- MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
- MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
- MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
- MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button ard_buttons[] = {
- GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
- GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
- GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
- GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
- .buttons = ard_buttons,
- .nbuttons = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
- {
- .start = MX53_CS1_64MB_BASE_ADDR,
- .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
- .resource = ard_smsc911x_resources,
- .dev = {
- .platform_data = &ard_smsc911x_config,
- },
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
- .cd_gpio = ARD_SD1_CD,
- .wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
- .bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
- .bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
- gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
- gpio_direction_input(ARD_ETHERNET_INT_B);
-
- gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
- gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
- u32 reg;
- void __iomem *weim_base, *iomuxc_base;
-
- weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
- if (!weim_base)
- return -ENOMEM;
-
- iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
- if (!iomuxc_base) {
- iounmap(weim_base);
- return -ENOMEM;
- }
-
- /* CS1 timings for LAN9220 */
- writel(0x20001, (weim_base + 0x18));
- writel(0x0, (weim_base + 0x1C));
- writel(0x16000202, (weim_base + 0x20));
- writel(0x00000002, (weim_base + 0x24));
- writel(0x16002082, (weim_base + 0x28));
- writel(0x00000000, (weim_base + 0x2C));
- writel(0x00000000, (weim_base + 0x90));
-
- /* specify 64 MB on CS1 and CS0 on GPR1 */
- reg = readl(iomuxc_base + 0x4);
- reg &= ~0x3F;
- reg |= 0x1B;
- writel(reg, (iomuxc_base + 0x4));
-
- iounmap(iomuxc_base);
- iounmap(weim_base);
-
- return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
- weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
- &ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
- imx53_soc_init();
- imx53_add_imx_uart(0, NULL);
-
- imx53_ard_common_init();
- mx53_ard_io_init();
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
- ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
- imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
- imx_add_gpio_keys(&ard_button_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
- .init = mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_ard_timer,
- .init_machine = mx53_ard_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 09fe219..0000000
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- MX53_PAD_PATA_DIOR__UART2_RTS,
- MX53_PAD_PATA_INTRQ__UART2_CTS,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
- MX53_PAD_EIM_D16__ECSPI1_SCLK,
- MX53_PAD_EIM_D17__ECSPI1_MISO,
- MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
- /* ecspi chip select lines */
- MX53_PAD_EIM_EB2__GPIO2_30,
- MX53_PAD_EIM_D19__GPIO3_19,
- /* LED */
- MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = MX53EVK_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
- .leds = mx53evk_leds,
- .num_leds = ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
- imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
- "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx53_evk_spi_cs[] = {
- EVK_ECSPI1_CS0,
- EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
- .chipselect = mx53_evk_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
- imx53_soc_init();
- imx53_evk_common_init();
-
- mx53_evk_init_uart();
- mx53_evk_fec_reset();
- imx53_add_fec(&mx53_evk_fec_pdata);
-
- imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
- imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
-
- spi_register_board_info(mx53_evk_spi_board_info,
- ARRAY_SIZE(mx53_evk_spi_board_info));
- imx53_add_ecspi(0, &mx53_evk_spi_data);
- imx53_add_imx2_wdt(0);
- gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
- .init = mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_evk_timer,
- .init_machine = mx53_evk_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 8abe23c..0000000
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define LOCO_LED IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
- /* FEC */
- MX53_PAD_FEC_MDC__FEC_MDC,
- MX53_PAD_FEC_MDIO__FEC_MDIO,
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- MX53_PAD_FEC_TX_EN__FEC_TX_EN,
- MX53_PAD_FEC_TXD1__FEC_TDATA_1,
- MX53_PAD_FEC_TXD0__FEC_TDATA_0,
- /* FEC_nRST */
- MX53_PAD_PATA_DA_0__GPIO7_6,
- /* FEC_nINT */
- MX53_PAD_PATA_DATA4__GPIO2_4,
- /* AUDMUX5 */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
- /* I2C2 */
- MX53_PAD_KEY_COL3__I2C2_SCL,
- MX53_PAD_KEY_ROW3__I2C2_SDA,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1_CD */
- MX53_PAD_EIM_DA13__GPIO3_13,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
- /* SD3_CD */
- MX53_PAD_EIM_DA11__GPIO3_11,
- /* SD3_WP */
- MX53_PAD_EIM_DA12__GPIO3_12,
- /* VGA */
- MX53_PAD_EIM_OE__IPU_DI1_PIN7,
- MX53_PAD_EIM_RW__IPU_DI1_PIN8,
- /* DISPLB */
- MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
- MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
- MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
- MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
- /* DISP0_POWER_EN */
- MX53_PAD_EIM_D24__GPIO3_24,
- /* DISP0 DET INT */
- MX53_PAD_EIM_D31__GPIO3_31,
- /* LVDS */
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* UART1 */
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
- /* CSI0 */
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
- /* DISPLAY */
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
- /* Audio CLK*/
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
- /* PWM */
- MX53_PAD_GPIO_1__PWM2_PWMO,
- /* SPDIF */
- MX53_PAD_GPIO_7__SPDIF_PLOCK,
- MX53_PAD_GPIO_17__SPDIF_OUT1,
- /* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
- MX53_PAD_PATA_DA_2__GPIO7_8,
- MX53_PAD_PATA_DATA5__GPIO2_5,
- MX53_PAD_PATA_DATA6__GPIO2_6,
- MX53_PAD_PATA_DATA14__GPIO2_14,
- MX53_PAD_PATA_DATA15__GPIO2_15,
- MX53_PAD_PATA_INTRQ__GPIO7_2,
- MX53_PAD_EIM_WAIT__GPIO5_0,
- MX53_PAD_NANDF_WP_B__GPIO6_9,
- MX53_PAD_NANDF_RB0__GPIO6_10,
- MX53_PAD_NANDF_CS1__GPIO6_14,
- MX53_PAD_NANDF_CS2__GPIO6_15,
- MX53_PAD_NANDF_CS3__GPIO6_16,
- MX53_PAD_GPIO_5__GPIO1_5,
- MX53_PAD_GPIO_16__GPIO7_11,
- MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
-{ \
- .gpio = gpio_num, \
- .type = EV_KEY, \
- .code = ev_code, \
- .active_low = act_low, \
- .desc = "btn " descr, \
- .wakeup = wake, \
-}
-
-static struct gpio_keys_button loco_buttons[] = {
- GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
- GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
- GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
- .buttons = loco_buttons,
- .nbuttons = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
- .cd_gpio = LOCO_SD1_CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
- .cd_gpio = LOCO_SD3_CD,
- .wp_gpio = LOCO_SD3_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(LOCO_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
- {
- .name = "green",
- .default_trigger = "heartbeat",
- .gpio = LOCO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
- .leds = mx53loco_leds,
- .num_leds = ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
- {
- I2C_BOARD_INFO("mma8450", 0x1C),
- },
-};
-
-static void __init mx53_loco_board_init(void)
-{
- int ret;
- imx53_soc_init();
- imx53_qsb_common_init();
-
- imx53_add_imx_uart(0, NULL);
- mx53_loco_fec_reset();
- imx53_add_fec(&mx53_loco_fec_data);
- imx53_add_imx2_wdt(0);
-
- ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
- if (ret)
- pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
- i2c_register_board_info(0, mx53loco_i2c_devices,
- ARRAY_SIZE(mx53loco_i2c_devices));
- imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
- imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
- imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
- imx_add_gpio_keys(&loco_button_data);
- gpio_led_register_device(-1, &mx53loco_leds_data);
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
- .init = mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_loco_timer,
- .init_machine = mx53_loco_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index b15d6a6d..0000000
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
- MX53_PAD_PATA_DA_1__UART3_CTS,
- MX53_PAD_PATA_DA_2__UART3_RTS,
- /* I2C1 */
- MX53_PAD_CSI0_DAT8__I2C1_SDA,
- MX53_PAD_CSI0_DAT9__I2C1_SCL,
- /* SD1 */
- MX53_PAD_SD1_CMD__ESDHC1_CMD,
- MX53_PAD_SD1_CLK__ESDHC1_CLK,
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD2 */
- MX53_PAD_SD2_CMD__ESDHC2_CMD,
- MX53_PAD_SD2_CLK__ESDHC2_CLK,
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
- /* SD3 */
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
- MX53_PAD_PATA_IORDY__ESDHC3_CLK,
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
- imx53_add_imx_uart(0, NULL);
- imx53_add_imx_uart(1, NULL);
- imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- gpio_direction_output(SMD_FEC_PHY_RST, 0);
- msleep(1);
- gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
- int ret;
-
- /* Enable SATA PWR */
- ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
- GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
- if (ret) {
- pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
- return;
- }
-}
-
-void __init imx53_smd_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
- imx53_soc_init();
- imx53_smd_common_init();
-
- mx53_smd_init_uart();
- mx53_smd_fec_reset();
- imx53_add_fec(&mx53_smd_fec_data);
- imx53_add_imx2_wdt(0);
- imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(1, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
- mx53_smd_ahci_pwr_on();
- imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
- mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
- .init = mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
- .map_io = mx53_map_io,
- .init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
- .timer = &mx53_smd_timer,
- .init_machine = mx53_smd_board_init,
- .init_late = imx53_init_late,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 52d8f53..acb0aad 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -128,25 +128,6 @@
.script_addrs = &imx51_sdma_script,
};
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .app_2_mcu_addr = 683,
- .mcu_2_app_addr = 747,
- .uart_2_mcu_addr = 817,
- .shp_2_mcu_addr = 891,
- .mcu_2_shp_addr = 960,
- .uartsh_2_mcu_addr = 1032,
- .spdif_2_mcu_addr = 1100,
- .mcu_2_spdif_addr = 1134,
- .firi_2_mcu_addr = 1193,
- .mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
- .fw_name = "sdma-imx53.bin",
- .script_addrs = &imx53_sdma_script,
-};
-
static const struct resource imx50_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
};
@@ -155,10 +136,6 @@
DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
};
-static const struct resource imx53_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx35 type gpio */
@@ -196,30 +173,6 @@
ARRAY_SIZE(imx51_audmux_res));
}
-void __init imx53_soc_init(void)
-{
- /* i.mx53 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
- mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
- mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
- mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
- pinctrl_provide_dummies();
- /* i.mx53 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
- imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
- /* i.mx53 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
- ARRAY_SIZE(imx53_audmux_res));
-}
-
void __init imx51_init_late(void)
{
mx51_neon_fixup();
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
deleted file mode 100644
index ee870c4..0000000
--- a/arch/arm/mach-imx/mx51_efika.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-
-#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
-
- /* SD/MMC WP/CD */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
- MX51_PAD_GPIO1_7__SD2_WP,
- MX51_PAD_GPIO1_8__SD2_CD,
-
- /* spi */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
- MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_GPIO1_6__GPIO1_6,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB RESET */
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* WLAN */
- MX51_PAD_EIM_A22__GPIO2_16,
- MX51_PAD_EIM_A16__GPIO2_10,
-
- /* USB PHY RESET */
- MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- u32 v;
- void __iomem *usb_base;
- void __iomem *socregs_base;
-
- mxc_iomux_v3_setup_pad(usbh1gpio);
- gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
- gpio_direction_output(EFIKAMX_USBH1_STP, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USBH1_STP, 1);
- msleep(1);
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
- /* The clock for the USBH1 ULPI port will come externally */
- /* from the PHY. */
- v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- socregs_base + MX51_USB_CTRL_1_OFFSET);
-
- iounmap(usb_base);
-
- gpio_free(EFIKAMX_USBH1_STP);
- mxc_iomux_v3_setup_pad(usbh1stp);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
- gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
- gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
- mx51_efika_hubreset();
-
- /* pulling it low, means no USB at all... */
- gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
- gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
- msleep(1);
- gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
- usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- if (usbh1_config.otg)
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- },
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
- .name = "spi_flash",
- .parts = mx51_efika_spi_nor_partitions,
- .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
- .type = "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDA", "1-000a"),
- REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
- /* sgtl5000 */
- REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
- REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
- {
- .supply = "pwgt1",
- }
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
- {
- .supply = "pwgt2",
- }
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
- {
- .supply = "coincell",
- }
-};
-
-static struct regulator_init_data sw1_init = {
- .constraints = {
- .name = "SW1",
- .min_uV = 600000,
- .max_uV = 1375000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .valid_modes_mask = 0,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 850000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
- .consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
- .constraints = {
- .name = "SW2",
- .min_uV = 900000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- .state_mem = {
- .uV = 950000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- }
-};
-
-static struct regulator_init_data sw3_init = {
- .constraints = {
- .name = "SW3",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data sw4_init = {
- .constraints = {
- .name = "SW4",
- .min_uV = 1100000,
- .max_uV = 1850000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data viohi_init = {
- .constraints = {
- .name = "VIOHI",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb_init = {
- .constraints = {
- .name = "VUSB",
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data swbst_init = {
- .constraints = {
- .name = "SWBST",
- }
-};
-
-static struct regulator_init_data vdig_init = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
- .consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
- .constraints = {
- .name = "VPLL",
- .min_uV = 1050000,
- .max_uV = 1800000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vusb2_init = {
- .constraints = {
- .name = "VUSB2",
- .min_uV = 2400000,
- .max_uV = 2775000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vvideo_init = {
- .constraints = {
- .name = "VVIDEO",
- .min_uV = 2775000,
- .max_uV = 2775000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
- .consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
- .constraints = {
- .name = "VAUDIO",
- .min_uV = 2300000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vsd_init = {
- .constraints = {
- .name = "VSD",
- .min_uV = 1800000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
- .consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
- .constraints = {
- .name = "VCAM",
- .min_uV = 2500000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
- .boot_on = 1,
- }
-};
-
-static struct regulator_init_data vgen1_init = {
- .constraints = {
- .name = "VGEN1",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen2_init = {
- .constraints = {
- .name = "VGEN2",
- .min_uV = 1200000,
- .max_uV = 3150000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data vgen3_init = {
- .constraints = {
- .name = "VGEN3",
- .min_uV = 1800000,
- .max_uV = 2900000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .always_on = 1,
- }
-};
-
-static struct regulator_init_data gpo1_init = {
- .constraints = {
- .name = "GPO1",
- }
-};
-
-static struct regulator_init_data gpo2_init = {
- .constraints = {
- .name = "GPO2",
- }
-};
-
-static struct regulator_init_data gpo3_init = {
- .constraints = {
- .name = "GPO3",
- }
-};
-
-static struct regulator_init_data gpo4_init = {
- .constraints = {
- .name = "GPO4",
- }
-};
-
-static struct regulator_init_data pwgt1_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
- .consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
- .consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
- .constraints = {
- .name = "COINCELL",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
- .consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
- { .id = MC13892_SW1, .init_data = &sw1_init },
- { .id = MC13892_SW2, .init_data = &sw2_init },
- { .id = MC13892_SW3, .init_data = &sw3_init },
- { .id = MC13892_SW4, .init_data = &sw4_init },
- { .id = MC13892_SWBST, .init_data = &swbst_init },
- { .id = MC13892_VIOHI, .init_data = &viohi_init },
- { .id = MC13892_VPLL, .init_data = &vpll_init },
- { .id = MC13892_VDIG, .init_data = &vdig_init },
- { .id = MC13892_VSD, .init_data = &vsd_init },
- { .id = MC13892_VUSB2, .init_data = &vusb2_init },
- { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
- { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
- { .id = MC13892_VCAM, .init_data = &vcam_init },
- { .id = MC13892_VGEN1, .init_data = &vgen1_init },
- { .id = MC13892_VGEN2, .init_data = &vgen2_init },
- { .id = MC13892_VGEN3, .init_data = &vgen3_init },
- { .id = MC13892_VUSB, .init_data = &vusb_init },
- { .id = MC13892_GPO1, .init_data = &gpo1_init },
- { .id = MC13892_GPO2, .init_data = &gpo2_init },
- { .id = MC13892_GPO3, .init_data = &gpo3_init },
- { .id = MC13892_GPO4, .init_data = &gpo4_init },
- { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
- { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
- { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC,
- .regulators = {
- .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
- .regulators = mx51_efika_regulators,
- },
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &mx51_efika_spi_flash_data,
- .irq = -1,
- },
- {
- .modalias = "mc13892",
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &mx51_efika_mc13892_data,
- /* irq number is run-time assigned */
- },
-};
-
-static int mx51_efika_spi_cs[] = {
- EFIKAMX_SPI_CS0,
- EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
- .chipselect = mx51_efika_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
- ARRAY_SIZE(mx51efika_pads));
- imx51_add_imx_uart(0, &uart_pdata);
- mx51_efika_usb();
-
- /* FIXME: comes from original code. check this. */
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- sw2_init.constraints.state_mem.uV = 1100000;
- else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
- sw2_init.constraints.state_mem.uV = 1250000;
- sw1_init.constraints.state_mem.uV = 1000000;
- }
- if (machine_is_mx51_efikasb())
- vgen1_init.constraints.max_uV = 1200000;
-
- gpio_request(EFIKAMX_PMIC, "pmic irq");
- gpio_direction_input(EFIKAMX_PMIC);
- mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
- spi_register_board_info(mx51_efika_spi_board_info,
- ARRAY_SIZE(mx51_efika_spi_board_info));
- imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
- imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
- get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
deleted file mode 100644
index 8de70de..0000000
--- a/arch/arm/mach-integrator/include/mach/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
-#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index ec467ba..4c03475 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -324,6 +324,10 @@
*/
#define PHYS_PCI_V3_BASE 0x62000000
+#define PCI_MEMORY_VADDR 0xe8000000
+#define PCI_CONFIG_VADDR 0xec000000
+#define PCI_V3_VADDR 0xed000000
+
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 3b22675..fd3ef28 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -50,6 +50,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <plat/fpga-irq.h>
@@ -73,7 +74,7 @@
* e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
* ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
* ed000000 62000000 PCI V3 regs PHYS_PCI_V3_BASE (max 64k)
- * ee000000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
+ * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
* ef000000 Cache flush
* f1000000 10000000 Core module registers
* f1100000 11000000 System controller registers
@@ -147,11 +148,6 @@
.pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
.length = SZ_64K,
.type = MT_DEVICE
- }, {
- .virtual = PCI_IO_VADDR,
- .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE
}
};
@@ -159,6 +155,7 @@
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
vga_base = PCI_MEMORY_VADDR;
+ pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index b866880..495f181 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -41,61 +41,61 @@
/*
* The V3 PCI interface chip in Integrator provides several windows from
* local bus memory into the PCI memory areas. Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse
+ * are not really enough windows for our usage, therefore we reuse
* one of the windows for access to PCI configuration space. The
* memory map is as follows:
- *
+ *
* Local Bus Memory Usage
- *
+ *
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
* 60000000 - 60FFFFFF PCI IO. 16M
* 61000000 - 61FFFFFF PCI Configuration. 16M
- *
+ *
* There are three V3 windows, each described by a pair of V3 registers.
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
* Base0 and Base1 can be used for any type of PCI memory access. Base2
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
* uses this only for PCI IO space.
- *
+ *
* Normally these spaces are mapped using the following base registers:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF
- *
+ *
* This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI
+ * When PCI configuration accesses are needed (via the uHAL PCI
* configuration space primitives) we must remap the spaces as follows:
- *
+ *
* Usage Local Bus Memory Base/Map registers used
- *
+ *
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
- *
+ *
* To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within
+ * The V3 chip translates an address by checking its range within
* each of the BASE/MAP pairs in turn (in ascending register number
* order). It will use the first matching pair. So, for example,
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from
+ * LB_BASE1/LB_MAP1, the V3 will use the translation from
* LB_BASE0/LB_MAP0.
- *
+ *
* To allow PCI Configuration space access, the code enlarges the
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
* be remapped for use by configuration cycles.
- *
- * At the end of the PCI Configuration space accesses,
+ *
+ * At the end of the PCI Configuration space accesses,
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
* reveal the now restored LB_BASE1/LB_MAP1 window.
- *
+ *
* NOTE: We do not set up I2O mapping. I suspect that this is only
* for an intelligent (target) device. Using I2O disables most of
* the mappings into PCI memory.
@@ -127,8 +127,8 @@
*
* returns: configuration address to play on the PCI bus
*
- * To generate the appropriate PCI configuration cycles in the PCI
- * configuration address space, you present the V3 with the following pattern
+ * To generate the appropriate PCI configuration cycles in the PCI
+ * configuration address space, you present the V3 with the following pattern
* (which is very nearly a type 1 (except that the lower two bits are 00 and
* not 01). In order for this mapping to work you need to set up one of
* the local to PCI aperatures to 16Mbytes in length translating to
@@ -138,7 +138,7 @@
*
* Type 0:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
@@ -150,7 +150,7 @@
*
* Type 1:
*
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
@@ -161,7 +161,7 @@
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
- *
+ *
*/
static DEFINE_RAW_SPINLOCK(v3_lock);
@@ -374,12 +374,9 @@
}
/*
- * the IO resource for this bus
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources,
- &ioport_resource, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
@@ -498,7 +495,6 @@
unsigned int temp;
int ret;
- pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
/*
diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
deleted file mode 100644
index f131885..0000000
--- a/arch/arm/mach-iop13xx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-
-#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index e190dcd..e10e101 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -69,21 +69,11 @@
* 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window
*
* IO MAP
- * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window
- * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window
+ * 0x00000 + 64K 0x0.fffb.0000 0xfee0.0000 PCIX outbound i/o window
+ * 0x10000 + 64K 0x0.fffd.0000 0xfee1.0000 PCIE outbound i/o window
*/
-#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL
#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL
#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\
- IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\
- IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- (IOP13XX_PCIX_LOWER_IO_PA\
- - IOP13XX_PCIX_LOWER_IO_VA))
#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL
#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL
@@ -103,20 +93,8 @@
IOP13XX_PCIX_LOWER_MEM_BA)
/* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL
#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\
- IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
- (IOP13XX_PCIE_LOWER_IO_PA\
- - IOP13XX_PCIE_LOWER_IO_VA))
+#define IOP13XX_PCIE_LOWER_IO_BA 0x10000UL /* OIOTVR */
#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL
#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 3c36419..851dc8f 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -23,25 +23,6 @@
#include "pci.h"
-void * __iomem __iop13xx_io(unsigned long io_addr)
-{
- void __iomem * io_virt;
-
- switch (io_addr) {
- case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
- io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
- break;
- case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
- io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
- break;
- default:
- BUG();
- }
-
- return io_virt;
-}
-EXPORT_SYMBOL(__iop13xx_io);
-
static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
size_t size, unsigned int mtype, void *caller)
{
@@ -67,12 +48,6 @@
(cookie - IOP13XX_PBI_LOWER_MEM_RA),
size, mtype, __builtin_return_address(0));
break;
- case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
- retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
- break;
- case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
- retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
- break;
case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
break;
@@ -99,8 +74,6 @@
goto skip;
switch ((u32) addr) {
- case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
- case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
goto skip;
}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 861cb12..91f731a 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -970,7 +970,6 @@
__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
/* Setup the Min Address for PCI memory... */
- pcibios_min_io = 0;
pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
/* if Linux is given control of an ATU
@@ -1003,7 +1002,7 @@
if (nr > 1)
return 0;
- res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
@@ -1042,17 +1041,13 @@
<< IOP13XX_ATUX_PCIXSR_FUNC_NUM;
__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
- res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
- res[0].end = IOP13XX_PCIX_UPPER_IO_PA;
- res[0].name = "IQ81340 ATUX PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
+ pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
- res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
- res[1].end = IOP13XX_PCIX_UPPER_MEM_RA;
- res[1].name = "IQ81340 ATUX PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
+ res->start = IOP13XX_PCIX_LOWER_MEM_RA;
+ res->end = IOP13XX_PCIX_UPPER_MEM_RA;
+ res->name = "IQ81340 ATUX PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
- sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
break;
case IOP13XX_INIT_ATU_ATUE:
/* Note: the function number field in the PCSR is ro */
@@ -1063,17 +1058,13 @@
__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
- res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
- res[0].end = IOP13XX_PCIE_UPPER_IO_PA;
- res[0].name = "IQ81340 ATUE PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
+ pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
- res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
- res[1].end = IOP13XX_PCIE_UPPER_MEM_RA;
- res[1].name = "IQ81340 ATUE PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
+ res->start = IOP13XX_PCIE_LOWER_MEM_RA;
+ res->end = IOP13XX_PCIE_UPPER_MEM_RA;
+ res->name = "IQ81340 ATUE PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
- sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
sys->map_irq = iop13xx_pcie_map_irq;
break;
default:
@@ -1081,11 +1072,9 @@
return 0;
}
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
+ request_resource(&iomem_resource, res);
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index daabb1f..4a7f20d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -40,16 +40,6 @@
.pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
.length = IOP13XX_PMMR_SIZE,
.type = MT_DEVICE,
- }, { /* PCIE IO space */
- .virtual = IOP13XX_PCIE_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
- .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
- }, { /* PCIX IO space */
- .virtual = IOP13XX_PCIX_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
- .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
},
};
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
deleted file mode 100644
index e2ada26..0000000
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
deleted file mode 100644
index f7c1b65..0000000
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1201191..3f7b05f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -42,16 +42,6 @@
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
- .length = KIRKWOOD_PCIE1_IO_SIZE,
- .type = MT_DEVICE,
- }, {
.virtual = KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
deleted file mode 100644
index 5d0ab61..0000000
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
- + KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index c5b6851..af4f000 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -37,14 +37,12 @@
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
+#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
+#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 6e8b2ef..532d8ac 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -56,7 +56,7 @@
void __iomem *base;
spinlock_t conf_lock;
int irq;
- struct resource res[2];
+ struct resource res;
};
static int pcie_port_map[2];
@@ -137,20 +137,12 @@
pp->irq = IRQ_KIRKWOOD_PCIE;
/*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 0 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
- /*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 0 MEM";
- pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 0 MEM";
+ pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static void __init pcie1_ioresources_init(struct pcie_port *pp)
@@ -159,20 +151,12 @@
pp->irq = IRQ_KIRKWOOD_PCIE1;
/*
- * IORESOURCE_IO
- */
- pp->res[0].name = "PCIe 1 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
- pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
- /*
* IORESOURCE_MEM
*/
- pp->res[1].name = "PCIe 1 MEM";
- pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
- pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
- pp->res[1].flags = IORESOURCE_MEM;
+ pp->res.name = "PCIe 1 MEM";
+ pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+ pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+ pp->res.flags = IORESOURCE_MEM;
}
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
@@ -197,23 +181,21 @@
case 0:
kirkwood_enable_pcie_clk("0");
pcie0_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE);
break;
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
+ pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
}
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe%d IO resource failed\n", index);
- if (request_resource(&iomem_resource, &pp->res[1]))
+ if (request_resource(&iomem_resource, &pp->res))
panic("Request PCIe%d Memory resource failed\n", index);
- sys->io_offset = 0;
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
/*
* Generic PCIe unit setup.
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
deleted file mode 100644
index e620cda..0000000
--- a/arch/arm/mach-ks8695/include/mach/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
-#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON (0x00) /* Timer Control Register */
-#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
-#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
-#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
-#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
-#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
-
-
-#endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index ec783a3..46c84bc 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -25,53 +25,98 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/clockchips.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/regs-timer.h>
#include <mach/regs-irq.h>
#include "generic.h"
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
+
/*
- * Returns number of ms since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
+ * Timer registers
*/
-static unsigned long ks8695_gettimeoffset (void)
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
+#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
+
+/* Timer Control Register */
+#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
+
+static void ks8695_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- unsigned long elapsed, tick2, intpending;
+ u32 tmcon;
- /*
- * Get the current number of ticks. Note that there is a race
- * condition between us reading the timer and checking for an
- * interrupt. We solve this by ensuring that the counter has not
- * reloaded between our two reads.
- */
- elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
- do {
- tick2 = elapsed;
- intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
- elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
- } while (elapsed > tick2);
+ if (mode == CLOCK_EVT_FEAT_PERIODIC) {
+ u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+ u32 half = DIV_ROUND_CLOSEST(rate, 2);
- /* Convert to number of ticks expired (not remaining) */
- elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
+ /* Disable timer 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- /* Is interrupt pending? If so, then timer has been reloaded already. */
- if (intpending)
- elapsed += (CLOCK_TICK_RATE / HZ);
+ /* Both registers need to count down */
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
- /* Convert ticks to usecs */
- return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+ /* Re-enable timer1 */
+ tmcon |= TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+ }
}
+static int ks8695_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+
+{
+ u32 half = DIV_ROUND_CLOSEST(cycles, 2);
+ u32 tmcon;
+
+ /* Disable timer 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* Both registers need to count down */
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+ writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+
+ /* Re-enable timer1 */
+ tmcon |= TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+
+ return 0;
+}
+
+static struct clock_event_device clockevent_ks8695 = {
+ .name = "ks8695_t1tc",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .set_next_event = ks8695_set_next_event,
+ .set_mode = ks8695_set_mode,
+};
+
/*
* IRQ handler for the timer.
*/
static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *evt = &clockevent_ks8695;
+
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
@@ -83,18 +128,22 @@
static void ks8695_timer_setup(void)
{
- unsigned long tmout = CLOCK_TICK_RATE / HZ;
unsigned long tmcon;
- /* disable timer1 */
- tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+ /* Disable timer 0 and 1 */
+ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ tmcon &= ~TMCON_T0EN;
+ tmcon &= ~TMCON_T1EN;
+ writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
- __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
-
- /* re-enable timer1 */
- __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+ /*
+ * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles
+ * (one on each counter) maximum 2*2^32, but the API will only
+ * accept up to a 32bit full word (0xFFFFFFFFU).
+ */
+ clockevents_config_and_register(&clockevent_ks8695,
+ KS8695_CLOCK_RATE, 2,
+ 0xFFFFFFFFU);
}
static void __init ks8695_timer_init (void)
@@ -107,8 +156,6 @@
struct sys_timer ks8695_timer = {
.init = ks8695_timer_init,
- .offset = ks8695_gettimeoffset,
- .resume = ks8695_timer_setup,
};
void ks8695_restart(char mode, const char *cmd)
@@ -119,12 +166,12 @@
soft_restart(0);
/* disable timer0 */
- reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+ writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
/* enable watchdog mode */
- __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+ writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
/* re-enable timer0 */
- __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+ writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
}
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 7fddd01..d697d07 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -108,18 +108,21 @@
config CPU_PXA168
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
+ select COMMON_CLK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
+ select COMMON_CLK
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b786f7e..095c155 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,13 +2,19 @@
# Makefile for Marvell's PXA168 processors line
#
-obj-y += common.o clock.o devices.o time.o irq.o
+obj-y += common.o devices.o time.o irq.o
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o
+ifeq ($(CONFIG_COMMON_CLK), )
+obj-y += clock.o
+obj-$(CONFIG_CPU_PXA168) += clock-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clock-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clock-mmp2.o
+endif
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_CPU_PXA910) += pm-pxa910.o
obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
new file mode 100644
index 0000000..21d2200
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-mmp2.c
@@ -0,0 +1,111 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_RTC APBC_REG(0x000)
+#define APBC_TWSI1 APBC_REG(0x004)
+#define APBC_TWSI2 APBC_REG(0x008)
+#define APBC_TWSI3 APBC_REG(0x00c)
+#define APBC_TWSI4 APBC_REG(0x010)
+#define APBC_KPC APBC_REG(0x018)
+#define APBC_UART1 APBC_REG(0x02c)
+#define APBC_UART2 APBC_REG(0x030)
+#define APBC_UART3 APBC_REG(0x034)
+#define APBC_GPIO APBC_REG(0x038)
+#define APBC_PWM0 APBC_REG(0x03c)
+#define APBC_PWM1 APBC_REG(0x040)
+#define APBC_PWM2 APBC_REG(0x044)
+#define APBC_PWM3 APBC_REG(0x048)
+#define APBC_SSP0 APBC_REG(0x04c)
+#define APBC_SSP1 APBC_REG(0x050)
+#define APBC_SSP2 APBC_REG(0x054)
+#define APBC_SSP3 APBC_REG(0x058)
+#define APBC_SSP4 APBC_REG(0x05c)
+#define APBC_SSP5 APBC_REG(0x060)
+#define APBC_TWSI5 APBC_REG(0x07c)
+#define APBC_TWSI6 APBC_REG(0x080)
+#define APBC_UART4 APBC_REG(0x088)
+
+#define APMU_USB APMU_REG(0x05c)
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_SDH0 APMU_REG(0x054)
+#define APMU_SDH1 APMU_REG(0x058)
+#define APMU_SDH2 APMU_REG(0x0e8)
+#define APMU_SDH3 APMU_REG(0x0ec)
+
+static void sdhc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst |= clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst &= ~clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+ .enable = sdhc_clk_enable,
+ .disable = sdhc_clk_disable,
+};
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 26000000);
+static APBC_CLK(uart2, UART2, 1, 26000000);
+static APBC_CLK(uart3, UART3, 1, 26000000);
+static APBC_CLK(uart4, UART4, 1, 26000000);
+static APBC_CLK(twsi1, TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, TWSI6, 0, 26000000);
+static APBC_CLK(gpio, GPIO, 0, 26000000);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
+
+static struct clk_lookup mmp2_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+ INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+ INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+ INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
+};
+
+void __init mmp2_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+}
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
new file mode 100644
index 0000000..5e6c18c
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-pxa168.c
@@ -0,0 +1,91 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_UART1 APBC_REG(0x000)
+#define APBC_UART2 APBC_REG(0x004)
+#define APBC_GPIO APBC_REG(0x008)
+#define APBC_PWM1 APBC_REG(0x00c)
+#define APBC_PWM2 APBC_REG(0x010)
+#define APBC_PWM3 APBC_REG(0x014)
+#define APBC_PWM4 APBC_REG(0x018)
+#define APBC_RTC APBC_REG(0x028)
+#define APBC_TWSI0 APBC_REG(0x02c)
+#define APBC_KPC APBC_REG(0x030)
+#define APBC_TWSI1 APBC_REG(0x06c)
+#define APBC_UART3 APBC_REG(0x070)
+#define APBC_SSP1 APBC_REG(0x81c)
+#define APBC_SSP2 APBC_REG(0x820)
+#define APBC_SSP3 APBC_REG(0x84c)
+#define APBC_SSP4 APBC_REG(0x858)
+#define APBC_SSP5 APBC_REG(0x85c)
+
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_LCD APMU_REG(0x04c)
+#define APMU_ETH APMU_REG(0x0fc)
+#define APMU_USB APMU_REG(0x05c)
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, UART1, 1, 14745600);
+static APBC_CLK(uart2, UART2, 1, 14745600);
+static APBC_CLK(uart3, UART3, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(ssp1, SSP1, 4, 0);
+static APBC_CLK(ssp2, SSP2, 4, 0);
+static APBC_CLK(ssp3, SSP3, 4, 0);
+static APBC_CLK(ssp4, SSP4, 4, 0);
+static APBC_CLK(ssp5, SSP5, 4, 0);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(keypad, KPC, 0, 32000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+ INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+ INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+ INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+ INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+ INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+ INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa168_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+}
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
new file mode 100644
index 0000000..933ea71
--- /dev/null
+++ b/arch/arm/mach-mmp/clock-pxa910.c
@@ -0,0 +1,67 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "clock.h"
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_UART0 APBC_REG(0x000)
+#define APBC_UART1 APBC_REG(0x004)
+#define APBC_GPIO APBC_REG(0x008)
+#define APBC_PWM1 APBC_REG(0x00c)
+#define APBC_PWM2 APBC_REG(0x010)
+#define APBC_PWM3 APBC_REG(0x014)
+#define APBC_PWM4 APBC_REG(0x018)
+#define APBC_SSP1 APBC_REG(0x01c)
+#define APBC_SSP2 APBC_REG(0x020)
+#define APBC_RTC APBC_REG(0x028)
+#define APBC_TWSI0 APBC_REG(0x02c)
+#define APBC_KPC APBC_REG(0x030)
+#define APBC_SSP3 APBC_REG(0x04c)
+#define APBC_TWSI1 APBC_REG(0x06c)
+
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_USB APMU_REG(0x05c)
+
+static APBC_CLK(uart1, UART0, 1, 14745600);
+static APBC_CLK(uart2, UART1, 1, 14745600);
+static APBC_CLK(twsi0, TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PWM4, 1, 13000000);
+static APBC_CLK(gpio, GPIO, 0, 13000000);
+static APBC_CLK(rtc, RTC, 8, 32768);
+
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
+};
+
+void __init pxa910_clk_init(void)
+{
+ clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 1c9d6c1..bd45327 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -7,3 +7,6 @@
extern void __init icu_init_irq(void);
extern void __init mmp_map_io(void);
extern void mmp_restart(char, const char *);
+extern void __init pxa168_clk_init(void);
+extern void __init pxa910_clk_init(void);
+extern void __init mmp2_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 68b0c93..ddc812f 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -13,101 +13,6 @@
#include <mach/addr-map.h>
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_PXA168_UART1 APBC_REG(0x000)
-#define APBC_PXA168_UART2 APBC_REG(0x004)
-#define APBC_PXA168_GPIO APBC_REG(0x008)
-#define APBC_PXA168_PWM1 APBC_REG(0x00c)
-#define APBC_PXA168_PWM2 APBC_REG(0x010)
-#define APBC_PXA168_PWM3 APBC_REG(0x014)
-#define APBC_PXA168_PWM4 APBC_REG(0x018)
-#define APBC_PXA168_RTC APBC_REG(0x028)
-#define APBC_PXA168_TWSI0 APBC_REG(0x02c)
-#define APBC_PXA168_KPC APBC_REG(0x030)
-#define APBC_PXA168_TIMERS APBC_REG(0x034)
-#define APBC_PXA168_AIB APBC_REG(0x03c)
-#define APBC_PXA168_SW_JTAG APBC_REG(0x040)
-#define APBC_PXA168_ONEWIRE APBC_REG(0x048)
-#define APBC_PXA168_ASFAR APBC_REG(0x050)
-#define APBC_PXA168_ASSAR APBC_REG(0x054)
-#define APBC_PXA168_TWSI1 APBC_REG(0x06c)
-#define APBC_PXA168_UART3 APBC_REG(0x070)
-#define APBC_PXA168_AC97 APBC_REG(0x084)
-#define APBC_PXA168_SSP1 APBC_REG(0x81c)
-#define APBC_PXA168_SSP2 APBC_REG(0x820)
-#define APBC_PXA168_SSP3 APBC_REG(0x84c)
-#define APBC_PXA168_SSP4 APBC_REG(0x858)
-#define APBC_PXA168_SSP5 APBC_REG(0x85c)
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_PXA910_UART0 APBC_REG(0x000)
-#define APBC_PXA910_UART1 APBC_REG(0x004)
-#define APBC_PXA910_GPIO APBC_REG(0x008)
-#define APBC_PXA910_PWM1 APBC_REG(0x00c)
-#define APBC_PXA910_PWM2 APBC_REG(0x010)
-#define APBC_PXA910_PWM3 APBC_REG(0x014)
-#define APBC_PXA910_PWM4 APBC_REG(0x018)
-#define APBC_PXA910_SSP1 APBC_REG(0x01c)
-#define APBC_PXA910_SSP2 APBC_REG(0x020)
-#define APBC_PXA910_IPC APBC_REG(0x024)
-#define APBC_PXA910_RTC APBC_REG(0x028)
-#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
-#define APBC_PXA910_KPC APBC_REG(0x030)
-#define APBC_PXA910_TIMERS APBC_REG(0x034)
-#define APBC_PXA910_TBROT APBC_REG(0x038)
-#define APBC_PXA910_AIB APBC_REG(0x03c)
-#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
-#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
-#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
-#define APBC_PXA910_SSP3 APBC_REG(0x04c)
-#define APBC_PXA910_ASFAR APBC_REG(0x050)
-#define APBC_PXA910_ASSAR APBC_REG(0x054)
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_MMP2_RTC APBC_REG(0x000)
-#define APBC_MMP2_TWSI1 APBC_REG(0x004)
-#define APBC_MMP2_TWSI2 APBC_REG(0x008)
-#define APBC_MMP2_TWSI3 APBC_REG(0x00c)
-#define APBC_MMP2_TWSI4 APBC_REG(0x010)
-#define APBC_MMP2_ONEWIRE APBC_REG(0x014)
-#define APBC_MMP2_KPC APBC_REG(0x018)
-#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c)
-#define APBC_MMP2_SW_JTAG APBC_REG(0x020)
-#define APBC_MMP2_TIMERS APBC_REG(0x024)
-#define APBC_MMP2_UART1 APBC_REG(0x02c)
-#define APBC_MMP2_UART2 APBC_REG(0x030)
-#define APBC_MMP2_UART3 APBC_REG(0x034)
-#define APBC_MMP2_GPIO APBC_REG(0x038)
-#define APBC_MMP2_PWM0 APBC_REG(0x03c)
-#define APBC_MMP2_PWM1 APBC_REG(0x040)
-#define APBC_MMP2_PWM2 APBC_REG(0x044)
-#define APBC_MMP2_PWM3 APBC_REG(0x048)
-#define APBC_MMP2_SSP0 APBC_REG(0x04c)
-#define APBC_MMP2_SSP1 APBC_REG(0x050)
-#define APBC_MMP2_SSP2 APBC_REG(0x054)
-#define APBC_MMP2_SSP3 APBC_REG(0x058)
-#define APBC_MMP2_SSP4 APBC_REG(0x05c)
-#define APBC_MMP2_SSP5 APBC_REG(0x060)
-#define APBC_MMP2_AIB APBC_REG(0x064)
-#define APBC_MMP2_ASFAR APBC_REG(0x068)
-#define APBC_MMP2_ASSAR APBC_REG(0x06c)
-#define APBC_MMP2_USIM APBC_REG(0x070)
-#define APBC_MMP2_MPMU APBC_REG(0x074)
-#define APBC_MMP2_IPC APBC_REG(0x078)
-#define APBC_MMP2_TWSI5 APBC_REG(0x07c)
-#define APBC_MMP2_TWSI6 APBC_REG(0x080)
-#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084)
-#define APBC_MMP2_UART4 APBC_REG(0x088)
-#define APBC_MMP2_RIPC APBC_REG(0x08c)
-#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */
-#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4)
-
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 7af8deb..93c8d0e 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -13,21 +13,6 @@
#include <mach/addr-map.h>
-/* Clock Reset Control */
-#define APMU_IRE APMU_REG(0x048)
-#define APMU_LCD APMU_REG(0x04c)
-#define APMU_CCIC APMU_REG(0x050)
-#define APMU_SDH0 APMU_REG(0x054)
-#define APMU_SDH1 APMU_REG(0x058)
-#define APMU_USB APMU_REG(0x05c)
-#define APMU_NAND APMU_REG(0x060)
-#define APMU_DMA APMU_REG(0x064)
-#define APMU_GEU APMU_REG(0x068)
-#define APMU_BUS APMU_REG(0x06c)
-#define APMU_SDH2 APMU_REG(0x0e8)
-#define APMU_SDH3 APMU_REG(0x0ec)
-#define APMU_ETH APMU_REG(0x0fc)
-
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
#define APMU_FNRST_DIS (1 << 1)
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index c709a24..3a3768c 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -20,7 +20,6 @@
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
@@ -29,7 +28,6 @@
#include <mach/mmp2.h>
#include "common.h"
-#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
@@ -98,95 +96,36 @@
mmp2_init_icu();
}
-static void sdhc_clk_enable(struct clk *clk)
-{
- uint32_t clk_rst;
-
- clk_rst = __raw_readl(clk->clk_rst);
- clk_rst |= clk->enable_val;
- __raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
- uint32_t clk_rst;
-
- clk_rst = __raw_readl(clk->clk_rst);
- clk_rst &= ~clk->enable_val;
- __raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
- .enable = sdhc_clk_enable,
- .disable = sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
-static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
-static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
-static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
-static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
- INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
- INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
- INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
- INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
static int __init mmp2_init(void)
{
if (cpu_is_mmp2()) {
#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init();
+ tauros2_init(0);
#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(mmp2_addr_map);
pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
- clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+ mmp2_clk_init();
}
return 0;
}
postcore_initcall(mmp2_init);
+#define APBC_TIMERS APBC_REG(0x024)
+
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
- __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+ __raw_writel(clk_rst, APBC_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 62d787c..b7f074f 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -18,8 +18,8 @@
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/addr-map.h>
#include <mach/cputype.h>
+#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
@@ -50,62 +50,13 @@
icu_init_irq();
}
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
-static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
-static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
-static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
-static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
-static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
-static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
-static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
-static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
-static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
- INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
- INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
- INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
- INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
- INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
- INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
- INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
- INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
- INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
- INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
static int __init pxa168_init(void)
{
if (cpu_is_pxa168()) {
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa168_mfp_addr_map);
pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
- clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
+ pxa168_clk_init();
}
return 0;
@@ -114,6 +65,7 @@
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS APBC_REG(0x34)
static void __init pxa168_timer_init(void)
{
@@ -121,10 +73,10 @@
* ourselves instead of using clk_* API. Clock rate is defined
* by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
*/
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
/* 3.25MHz, bus/functional clock enabled, release reset */
- __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
timer_init(IRQ_PXA168_TIMER1);
}
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 6da52e9..8b1e16f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -14,10 +14,10 @@
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/dma.h>
@@ -25,7 +25,6 @@
#include <mach/devices.h>
#include "common.h"
-#include "clock.h"
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
@@ -82,44 +81,16 @@
icu_init_irq();
}
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
-static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
-static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
- INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
- INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
- INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
- INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
- INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
- INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
static int __init pxa910_init(void)
{
if (cpu_is_pxa910()) {
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
mfp_init_base(MFPR_VIRT_BASE);
mfp_init_addr(pxa910_mfp_addr_map);
pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
- clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
+ pxa910_clk_init();
}
return 0;
@@ -128,12 +99,13 @@
/* system timer - clock enabled, 3.25MHz */
#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+#define APBC_TIMERS APBC_REG(0x34)
static void __init pxa910_timer_init(void)
{
/* reset and configure */
- __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
- __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
timer_init(IRQ_PXA910_AP1_TIMER1);
}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 1cd40ad..b2740c8 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -38,8 +38,6 @@
config ARCH_MSM8X60
bool "MSM8X60"
- select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
- && !MACH_MSM8X60_FFA)
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
@@ -47,16 +45,17 @@
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select USE_OF
config ARCH_MSM8960
bool "MSM8960"
select ARCH_MSM_SCORPIONMP
- select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
+ select USE_OF
endchoice
@@ -112,42 +111,6 @@
help
Support for the Qualcomm ST1.5.
-config MACH_MSM8X60_RUMI3
- depends on ARCH_MSM8X60
- bool "MSM8x60 RUMI3"
- help
- Support for the Qualcomm MSM8x60 RUMI3 emulator.
-
-config MACH_MSM8X60_SURF
- depends on ARCH_MSM8X60
- bool "MSM8x60 SURF"
- help
- Support for the Qualcomm MSM8x60 SURF eval board.
-
-config MACH_MSM8X60_SIM
- depends on ARCH_MSM8X60
- bool "MSM8x60 Simulator"
- help
- Support for the Qualcomm MSM8x60 simulator.
-
-config MACH_MSM8X60_FFA
- depends on ARCH_MSM8X60
- bool "MSM8x60 FFA"
- help
- Support for the Qualcomm MSM8x60 FFA eval board.
-
-config MACH_MSM8960_SIM
- depends on ARCH_MSM8960
- bool "MSM8960 Simulator"
- help
- Support for the Qualcomm MSM8960 simulator.
-
-config MACH_MSM8960_RUMI3
- depends on ARCH_MSM8960
- bool "MSM8960 RUMI3"
- help
- Support for the Qualcomm MSM8960 RUMI3 emulator.
-
endmenu
config MSM_SMD_PKG3
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4ad3969..17519fa 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,11 +1,11 @@
-obj-y += io.o idle.o timer.o
+obj-y += io.o timer.o
obj-y += clock.o
obj-$(CONFIG_DEBUG_FS) += clock-debug.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
@@ -25,8 +25,8 @@
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
+obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index 9b803a5..f7d6ae9 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -1,3 +1,6 @@
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
+
+dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb
+dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
deleted file mode 100644
index 805d4ee..0000000
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.c
- *
- * MSM architecture clock driver
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-#include "acpuclock.h"
-
-
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-/*
- * ARM11 clock configuration for specific ACPU speeds
- */
-
-#define ACPU_PLL_TCXO -1
-#define ACPU_PLL_0 0
-#define ACPU_PLL_1 1
-#define ACPU_PLL_2 2
-#define ACPU_PLL_3 3
-
-#define PERF_SWITCH_DEBUG 0
-#define PERF_SWITCH_STEP_DEBUG 0
-
-struct clock_state
-{
- struct clkctl_acpu_speed *current_speed;
- struct mutex lock;
- uint32_t acpu_switch_time_us;
- uint32_t max_speed_delta_khz;
- uint32_t vdd_switch_time_us;
- unsigned long power_collapse_khz;
- unsigned long wait_for_irq_khz;
-};
-
-static struct clk *ebi1_clk;
-static struct clock_state drv_state = { 0 };
-
-static void __init acpuclk_init(void);
-
-/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
-enum {
- VDD_0 = 0,
- VDD_1 = 1,
- VDD_2 = 2,
- VDD_3 = 3,
- VDD_4 = 3,
- VDD_5 = 3,
- VDD_6 = 3,
- VDD_7 = 7,
- VDD_END
-};
-
-struct clkctl_acpu_speed {
- unsigned int a11clk_khz;
- int pll;
- unsigned int a11clk_src_sel;
- unsigned int a11clk_src_div;
- unsigned int ahbclk_khz;
- unsigned int ahbclk_div;
- int vdd;
- unsigned int axiclk_khz;
- unsigned long lpj; /* loops_per_jiffy */
-/* Index in acpu_freq_tbl[] for steppings. */
- short down;
- short up;
-};
-
-/*
- * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initialize loops_per_jiffy to 0.
- *
- * Table stepping up/down is optimized for 256mhz jumps while staying on the
- * same PLL.
- */
-#if (0)
-static struct clkctl_acpu_speed acpu_freq_tbl[] = {
- { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
- { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 },
- { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 },
- { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 },
- { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 },
- { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 },
- { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 },
- { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 },
- { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 },
- { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
- { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 },
- { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 },
- { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
- { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#else /* Table of freq we currently use. */
-static struct clkctl_acpu_speed acpu_freq_tbl[] = {
- { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
- { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
- { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
- { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
- { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
- { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
- { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
- { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ_TABLE
-static struct cpufreq_frequency_table freq_table[] = {
- { 0, 122880 },
- { 1, 128000 },
- { 2, 245760 },
- { 3, 384000 },
- { 4, 528000 },
- { 5, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int pc_pll_request(unsigned id, unsigned on)
-{
- int res;
- on = !!on;
-
-#if PERF_SWITCH_DEBUG
- if (on)
- printk(KERN_DEBUG "Enabling PLL %d\n", id);
- else
- printk(KERN_DEBUG "Disabling PLL %d\n", id);
-#endif
-
- res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
- if (res < 0)
- return res;
-
-#if PERF_SWITCH_DEBUG
- if (on)
- printk(KERN_DEBUG "PLL %d enabled\n", id);
- else
- printk(KERN_DEBUG "PLL %d disabled\n", id);
-#endif
- return res;
-}
-
-
-/*----------------------------------------------------------------------------
- * ARM11 'owned' clock control
- *---------------------------------------------------------------------------*/
-
-unsigned long acpuclk_power_collapse(void) {
- int ret = acpuclk_get_rate();
- ret *= 1000;
- if (ret > drv_state.power_collapse_khz)
- acpuclk_set_rate(drv_state.power_collapse_khz, 1);
- return ret;
-}
-
-unsigned long acpuclk_get_wfi_rate(void)
-{
- return drv_state.wait_for_irq_khz;
-}
-
-unsigned long acpuclk_wait_for_irq(void) {
- int ret = acpuclk_get_rate();
- ret *= 1000;
- if (ret > drv_state.wait_for_irq_khz)
- acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
- return ret;
-}
-
-static int acpuclk_set_vdd_level(int vdd)
-{
- uint32_t current_vdd;
-
- current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
- current_vdd, vdd);
-#endif
- writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
- udelay(drv_state.vdd_switch_time_us);
- if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
-#if PERF_SWITCH_DEBUG
- printk(KERN_ERR "acpuclock: VDD set failed\n");
-#endif
- return -EIO;
- }
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "acpuclock: VDD switched\n");
-#endif
- return 0;
-}
-
-/* Set proper dividers for the given clock speed. */
-static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
- uint32_t reg_clkctl, reg_clksel, clk_div;
-
- /* AHB_CLK_DIV */
- clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
- /*
- * If the new clock divider is higher than the previous, then
- * program the divider before switching the clock
- */
- if (hunt_s->ahbclk_div > clk_div) {
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~(0x3 << 1);
- reg_clksel |= (hunt_s->ahbclk_div << 1);
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
- if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
- /* SRC0 */
-
- /* Program clock source */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0x07 << 4);
- reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock divider */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~0xf;
- reg_clkctl |= hunt_s->a11clk_src_div;
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock source selection */
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- } else {
- /* SRC1 */
-
- /* Program clock source */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0x07 << 12);
- reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock divider */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl &= ~(0xf << 8);
- reg_clkctl |= (hunt_s->a11clk_src_div << 8);
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
- /* Program clock source selection */
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
-
- /*
- * If the new clock divider is lower than the previous, then
- * program the divider after switching the clock
- */
- if (hunt_s->ahbclk_div < clk_div) {
- reg_clksel = readl(A11S_CLK_SEL_ADDR);
- reg_clksel &= ~(0x3 << 1);
- reg_clksel |= (hunt_s->ahbclk_div << 1);
- writel(reg_clksel, A11S_CLK_SEL_ADDR);
- }
-}
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
-{
- uint32_t reg_clkctl;
- struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
- int rc = 0;
- unsigned int plls_enabled = 0, pll;
-
- strt_s = cur_s = drv_state.current_speed;
-
- WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
- if (cur_s == NULL)
- return -ENOENT;
-
- if (rate == (cur_s->a11clk_khz * 1000))
- return 0;
-
- for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
- if (tgt_s->a11clk_khz == (rate / 1000))
- break;
- }
-
- if (tgt_s->a11clk_khz == 0)
- return -EINVAL;
-
- /* Choose the highest speed speed at or below 'rate' with same PLL. */
- if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
- while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
- tgt_s--;
- }
-
- if (strt_s->pll != ACPU_PLL_TCXO)
- plls_enabled |= 1 << strt_s->pll;
-
- if (!for_power_collapse) {
- mutex_lock(&drv_state.lock);
- if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
- rc = pc_pll_request(tgt_s->pll, 1);
- if (rc < 0) {
- pr_err("PLL%d enable failed (%d)\n",
- tgt_s->pll, rc);
- goto out;
- }
- plls_enabled |= 1 << tgt_s->pll;
- }
- /* Increase VDD if needed. */
- if (tgt_s->vdd > cur_s->vdd) {
- if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
- printk(KERN_ERR "Unable to switch ACPU vdd\n");
- goto out;
- }
- }
- }
-
- /* Set wait states for CPU between frequency changes */
- reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
- reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
- writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
- strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
-#endif
-
- while (cur_s != tgt_s) {
- /*
- * Always jump to target freq if within 256mhz, regulardless of
- * PLL. If differnece is greater, use the predefinied
- * steppings in the table.
- */
- int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
- if (d > drv_state.max_speed_delta_khz) {
- /* Step up or down depending on target vs current. */
- int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
- cur_s->up : cur_s->down;
- if (clk_index < 0) { /* This should not happen. */
- printk(KERN_ERR "cur:%u target: %u\n",
- cur_s->a11clk_khz, tgt_s->a11clk_khz);
- rc = -EINVAL;
- goto out;
- }
- cur_s = &acpu_freq_tbl[clk_index];
- } else {
- cur_s = tgt_s;
- }
-#if PERF_SWITCH_STEP_DEBUG
- printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
- __FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
-#endif
- if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
- && !(plls_enabled & (1 << cur_s->pll))) {
- rc = pc_pll_request(cur_s->pll, 1);
- if (rc < 0) {
- pr_err("PLL%d enable failed (%d)\n",
- cur_s->pll, rc);
- goto out;
- }
- plls_enabled |= 1 << cur_s->pll;
- }
-
- acpuclk_set_div(cur_s);
- drv_state.current_speed = cur_s;
- /* Re-adjust lpj for the new clock speed. */
- loops_per_jiffy = cur_s->lpj;
- udelay(drv_state.acpu_switch_time_us);
- }
-
- /* Nothing else to do for power collapse. */
- if (for_power_collapse)
- return 0;
-
- /* Disable PLLs we are not using anymore. */
- plls_enabled &= ~(1 << tgt_s->pll);
- for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
- if (plls_enabled & (1 << pll)) {
- rc = pc_pll_request(pll, 0);
- if (rc < 0) {
- pr_err("PLL%d disable failed (%d)\n", pll, rc);
- goto out;
- }
- }
-
- /* Change the AXI bus frequency if we can. */
- if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
- rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
- if (rc < 0)
- pr_err("Setting AXI min rate failed!\n");
- }
-
- /* Drop VDD level if we can. */
- if (tgt_s->vdd < strt_s->vdd) {
- if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
- printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
- }
-
-#if PERF_SWITCH_DEBUG
- printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
-#endif
-out:
- if (!for_power_collapse)
- mutex_unlock(&drv_state.lock);
- return rc;
-}
-
-static void __init acpuclk_init(void)
-{
- struct clkctl_acpu_speed *speed;
- uint32_t div, sel;
- int rc;
-
- /*
- * Determine the rate of ACPU clock
- */
-
- if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
- /* CLK_SRC0_SEL */
- sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
- /* CLK_SRC0_DIV */
- div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
- } else {
- /* CLK_SRC1_SEL */
- sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
- /* CLK_SRC1_DIV */
- div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
- }
-
- for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
- if (speed->a11clk_src_sel == sel
- && (speed->a11clk_src_div == div))
- break;
- }
- if (speed->a11clk_khz == 0) {
- printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
- return;
- }
-
- drv_state.current_speed = speed;
-
- rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
- if (rc < 0)
- pr_err("Setting AXI min rate failed!\n");
-
- printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
-}
-
-unsigned long acpuclk_get_rate(void)
-{
- WARN_ONCE(drv_state.current_speed == NULL,
- "acpuclk_get_rate: not initialized\n");
- if (drv_state.current_speed)
- return drv_state.current_speed->a11clk_khz;
- else
- return 0;
-}
-
-uint32_t acpuclk_get_switch_time(void)
-{
- return drv_state.acpu_switch_time_us;
-}
-
-/*----------------------------------------------------------------------------
- * Clock driver initialization
- *---------------------------------------------------------------------------*/
-
-/* Initialize the lpj field in the acpu_freq_tbl. */
-static void __init lpj_init(void)
-{
- int i;
- const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
- for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
- acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
- base_clk->a11clk_khz,
- acpu_freq_tbl[i].a11clk_khz);
- }
-}
-
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
-{
- pr_info("acpu_clock_init()\n");
-
- ebi1_clk = clk_get(NULL, "ebi1_clk");
-
- mutex_init(&drv_state.lock);
- drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
- drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
- drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
- drv_state.power_collapse_khz = clkdata->power_collapse_khz;
- drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
- acpuclk_init();
- lpj_init();
-#ifdef CONFIG_CPU_FREQ_TABLE
- cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
-#endif
-}
diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h
deleted file mode 100644
index 415de2e..0000000
--- a/arch/arm/mach-msm/acpuclock.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.h
- *
- * MSM architecture clock driver header
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
-unsigned long acpuclk_get_rate(void);
-uint32_t acpuclk_get_switch_time(void);
-unsigned long acpuclk_wait_for_irq(void);
-unsigned long acpuclk_power_collapse(void);
-unsigned long acpuclk_get_wfi_rate(void);
-
-
-#endif
-
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
new file mode 100644
index 0000000..f77f57f
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+ { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+ {}
+};
+
+static void __init msm8x60_init_irq(void)
+{
+ of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm8x60_init_late(void)
+{
+ smd_debugfs_init();
+}
+
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm_map_msm8x60_io,
+ .init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
+ .init_machine = msm8x60_dt_init,
+ .init_late = msm8x60_init_late,
+ .timer = &msm_dt_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
new file mode 100644
index 0000000..8df99b8
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -0,0 +1,49 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+ { .compatible = "qcom,msm-qgic2", .data = gic_of_init },
+ { }
+};
+
+static void __init msm_dt_init_irq(void)
+{
+ of_irq_init(msm_dt_gic_match);
+}
+
+static void __init msm_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const msm8960_dt_match[] __initconst = {
+ "qcom,msm8960-cdp",
+ NULL
+};
+
+DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm_map_msm8960_io,
+ .init_irq = msm_dt_init_irq,
+ .timer = &msm_dt_timer,
+ .init_machine = msm_dt_init,
+ .dt_compat = msm8960_dt_match,
+ .handle_irq = gic_handle_irq,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 4fa3e99..6ce542e 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -36,6 +36,7 @@
#include <linux/mtd/partitions.h>
#include "devices.h"
+#include "common.h"
static struct resource smc91x_resources[] = {
[0] = {
@@ -66,8 +67,6 @@
&smc91x_device,
};
-extern struct sys_timer msm_timer;
-
static void __init halibut_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
@@ -107,5 +106,5 @@
.init_irq = halibut_init_irq,
.init_machine = halibut_init,
.init_late = halibut_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x01_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index cf1f89a..df00bc0 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -30,7 +30,6 @@
#include <mach/board.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include "board-mahimahi.h"
#include "devices.h"
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
deleted file mode 100644
index 451ab1d..0000000
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x9C004300,
- .end = 0x9C0043ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSM_GPIO_TO_INT(132),
- .end = MSM_GPIO_TO_INT(132),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_dmov,
- &msm_device_nand,
- &smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
- if (socinfo_init() < 0)
- BUG();
-
- if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
- smc91x_resources[0].start = 0x98000300;
- smc91x_resources[0].end = 0x980003ff;
- smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
- smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
- if (gpio_tlmm_config(GPIO_CFG(85, 0,
- GPIO_INPUT,
- GPIO_PULL_DOWN,
- GPIO_2MA),
- GPIO_ENABLE)) {
- printk(KERN_ERR
- "%s: Err: Config GPIO-85 INT\n",
- __func__);
- }
- }
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
- msm_map_common_io();
- /* Technically dependent on the SoC but using machine_is
- * macros since socinfo is not available this early and there
- * are plans to restructure the code which will eliminate the
- * need for socinfo.
- */
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
- msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
- if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
- msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
- if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
- /* 7x27 has 256KB L2 cache:
- 64Kb/Way and 4-Way Associativity;
- R/W latency: 3 cycles;
- evmon/parity/share disabled. */
- l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
- }
-#endif
-}
-
-static void __init msm7x2x_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .atag_offset = 0x100,
- .map_io = msm7x2x_map_io,
- .init_irq = msm7x2x_init_irq,
- .init_machine = msm7x2x_init,
- .init_late = msm7x2x_init_late,
- .timer = &msm_timer,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index a500137..effa6f4 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -38,8 +38,7 @@
#include "devices.h"
#include "gpiomux.h"
#include "proc_comm.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
struct meminfo *mi)
@@ -132,7 +131,7 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -143,7 +142,7 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -154,5 +153,5 @@
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
.init_late = msm7x30_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x30_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
deleted file mode 100644
index 65f4a1d..0000000
--- a/arch/arm/mach-msm/board-msm8960.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
- struct meminfo *mi)
-{
- for (; tag->hdr.size; tag = tag_next(tag))
- if (tag->hdr.tag == ATAG_MEM &&
- tag->u.mem.start == 0x40200000) {
- tag->u.mem.start = 0x40000000;
- tag->u.mem.size += SZ_2M;
- }
-}
-
-static void __init msm8960_reserve(void)
-{
- memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8960_map_io(void)
-{
- msm_map_msm8960_io();
-}
-
-static void __init msm8960_init_irq(void)
-{
- unsigned int i;
- gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
- (void *)MSM_QGIC_CPU_BASE);
-
- /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
- writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
- if (machine_is_msm8960_rumi3())
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
-}
-
-static struct platform_device *sim_devices[] __initdata = {
- &msm8960_device_uart_gsbi2,
-};
-
-static struct platform_device *rumi3_devices[] __initdata = {
- &msm8960_device_uart_gsbi5,
-};
-
-static void __init msm8960_sim_init(void)
-{
- platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-
-static void __init msm8960_rumi3_init(void)
-{
- platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-
-static void __init msm8960_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
- .fixup = msm8960_fixup,
- .reserve = msm8960_reserve,
- .map_io = msm8960_map_io,
- .init_irq = msm8960_init_irq,
- .timer = &msm_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8960_sim_init,
- .init_late = msm8960_init_late,
-MACHINE_END
-
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
- .fixup = msm8960_fixup,
- .reserve = msm8960_reserve,
- .map_io = msm8960_map_io,
- .init_irq = msm8960_init_irq,
- .timer = &msm_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8960_rumi3_init,
- .init_late = msm8960_init_late,
-MACHINE_END
-
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
deleted file mode 100644
index e37a724..0000000
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
- struct meminfo *mi)
-{
- for (; tag->hdr.size; tag = tag_next(tag))
- if (tag->hdr.tag == ATAG_MEM &&
- tag->u.mem.start == 0x40200000) {
- tag->u.mem.start = 0x40000000;
- tag->u.mem.size += SZ_2M;
- }
-}
-
-static void __init msm8x60_reserve(void)
-{
- memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8x60_map_io(void)
-{
- msm_map_msm8x60_io();
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
- { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
- {}
-};
-#endif
-
-static void __init msm8x60_init_irq(void)
-{
- if (!of_have_populated_dt())
- gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
- (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
- else
- of_irq_init(msm_dt_gic_match);
-#endif
-
- /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
- writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
- /* RUMI does not adhere to GIC spec by enabling STIs by default.
- * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
- */
- if (!machine_is_msm8x60_sim())
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-
-static void __init msm8x60_init(void)
-{
-}
-
-static void __init msm8x60_init_late(void)
-{
- smd_debugfs_init();
-}
-
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
- {}
-};
-
-static void __init msm8x60_dt_init(void)
-{
- if (of_machine_is_compatible("qcom,msm8660-surf")) {
- printk(KERN_INFO "Init surf UART registers\n");
- msm8x60_init_uart12dm();
- }
-
- of_platform_populate(NULL, of_default_bus_match_table,
- msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- NULL
-};
-#endif /* CONFIG_OF */
-
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
- .fixup = msm8x60_fixup,
- .reserve = msm8x60_reserve,
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .handle_irq = gic_handle_irq,
- .init_machine = msm8x60_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
-MACHINE_END
-
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .map_io = msm8x60_map_io,
- .init_irq = msm8x60_init_irq,
- .init_machine = msm8x60_dt_init,
- .init_late = msm8x60_init_late,
- .timer = &msm_timer,
- .dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index c8fe0ed..b16b71a 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,8 +35,7 @@
#include <mach/mmc.h>
#include "devices.h"
-
-extern struct sys_timer msm_timer;
+#include "common.h"
static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156;
@@ -201,7 +200,7 @@
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &msm_timer,
+ .timer = &qsd8x50_timer,
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -210,5 +209,5 @@
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
.init_late = qsd8x50_init_late,
- .timer = &msm_timer,
+ .timer = &qsd8x50_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 2e569ab..b7b0fc7 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/system.h>
#include <mach/vreg.h>
#include <mach/board.h>
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index bbe13f1..4ba0800 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -31,6 +31,7 @@
#include "devices.h"
#include "board-trout.h"
+#include "common.h"
extern int trout_init_mmc(unsigned int);
@@ -42,8 +43,6 @@
&msm_device_i2c,
};
-extern struct sys_timer msm_timer;
-
static void __init trout_init_early(void)
{
arch_ioremap_caller = __msm_ioremap_caller;
@@ -111,5 +110,5 @@
.init_irq = trout_init_irq,
.init_machine = trout_init,
.init_late = trout_init_late,
- .timer = &msm_timer,
+ .timer = &msm7x01_timer,
MACHINE_END
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
index 63b7113..a52c970 100644
--- a/arch/arm/mach-msm/clock-pcom.c
+++ b/arch/arm/mach-msm/clock-pcom.c
@@ -25,7 +25,7 @@
/*
* glue for the proc_comm interface
*/
-int pc_clk_enable(unsigned id)
+static int pc_clk_enable(unsigned id)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
if (rc < 0)
@@ -34,7 +34,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-void pc_clk_disable(unsigned id)
+static void pc_clk_disable(unsigned id)
{
msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
}
@@ -54,7 +54,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_rate(unsigned id, unsigned rate)
+static int pc_clk_set_rate(unsigned id, unsigned rate)
{
/* The rate _might_ be rounded off to the nearest KHz value by the
* remote function. So a return value of 0 doesn't necessarily mean
@@ -67,7 +67,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_min_rate(unsigned id, unsigned rate)
+static int pc_clk_set_min_rate(unsigned id, unsigned rate)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
if (rc < 0)
@@ -76,7 +76,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_max_rate(unsigned id, unsigned rate)
+static int pc_clk_set_max_rate(unsigned id, unsigned rate)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
if (rc < 0)
@@ -85,7 +85,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-int pc_clk_set_flags(unsigned id, unsigned flags)
+static int pc_clk_set_flags(unsigned id, unsigned flags)
{
int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
if (rc < 0)
@@ -94,7 +94,7 @@
return (int)id < 0 ? -EINVAL : 0;
}
-unsigned pc_clk_get_rate(unsigned id)
+static unsigned pc_clk_get_rate(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
return 0;
@@ -102,7 +102,7 @@
return id;
}
-unsigned pc_clk_is_enabled(unsigned id)
+static unsigned pc_clk_is_enabled(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
return 0;
@@ -110,7 +110,7 @@
return id;
}
-long pc_clk_round_rate(unsigned id, unsigned rate)
+static long pc_clk_round_rate(unsigned id, unsigned rate)
{
/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
new file mode 100644
index 0000000..d68e5d7
--- /dev/null
+++ b/arch/arm/mach-msm/common.h
@@ -0,0 +1,30 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_COMMON_H
+#define __MACH_COMMON_H
+
+extern struct sys_timer msm7x01_timer;
+extern struct sys_timer msm7x30_timer;
+extern struct sys_timer msm_dt_timer;
+extern struct sys_timer qsd8x50_timer;
+
+extern void msm_map_common_io(void);
+extern void msm_map_msm7x30_io(void);
+extern void msm_map_msm8x60_io(void);
+extern void msm_map_msm8960_io(void);
+extern void msm_map_qsd8x50_io(void);
+
+extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+ unsigned int mtype, void *caller);
+
+
+#endif
diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c
deleted file mode 100644
index d9e1f26..0000000
--- a/arch/arm/mach-msm/devices-msm8960.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#define MSM_GSBI2_PHYS 0x16100000
-#define MSM_UART2DM_PHYS (MSM_GSBI2_PHYS + 0x40000)
-
-#define MSM_GSBI5_PHYS 0x16400000
-#define MSM_UART5DM_PHYS (MSM_GSBI5_PHYS + 0x40000)
-
-static struct resource resources_uart_gsbi2[] = {
- {
- .start = GSBI2_UARTDM_IRQ,
- .end = GSBI2_UARTDM_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART2DM_PHYS,
- .end = MSM_UART2DM_PHYS + PAGE_SIZE - 1,
- .name = "uart_resource",
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MSM_GSBI2_PHYS,
- .end = MSM_GSBI2_PHYS + PAGE_SIZE - 1,
- .name = "gsbi_resource",
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device msm8960_device_uart_gsbi2 = {
- .name = "msm_serial",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_uart_gsbi2),
- .resource = resources_uart_gsbi2,
-};
-
-static struct resource resources_uart_gsbi5[] = {
- {
- .start = GSBI5_UARTDM_IRQ,
- .end = GSBI5_UARTDM_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART5DM_PHYS,
- .end = MSM_UART5DM_PHYS + PAGE_SIZE - 1,
- .name = "uart_resource",
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MSM_GSBI5_PHYS,
- .end = MSM_GSBI5_PHYS + PAGE_SIZE - 1,
- .name = "gsbi_resource",
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device msm8960_device_uart_gsbi5 = {
- .name = "msm_serial",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_uart_gsbi5),
- .resource = resources_uart_gsbi5,
-};
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 02cae5e..354b91d 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -223,8 +223,7 @@
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
- list_del(&cmd->list);
- list_add_tail(&cmd->list, &active_commands[id]);
+ list_move_tail(&cmd->list, &active_commands[id]);
if (cmd->execute_func)
cmd->execute_func(cmd);
PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
deleted file mode 100644
index 0c9e13c..0000000
--- a/arch/arm/mach-msm/idle.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/mach-msm/idle.c
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-
-static void msm_idle(void)
-{
-#ifdef CONFIG_MSM7X00A_IDLE
- asm volatile (
-
- "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
- "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
- "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
- "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
-
- "mov r0, #0 /* prepare wfi value */ \n\t"
- "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
- "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
- "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
-
- "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
-
- : : : "r0","r1" );
-#endif
-}
-
-static int __init msm_idle_init(void)
-{
- arm_pm_idle = msm_idle;
- return 0;
-}
-
-arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 435f8ed..0a0c393 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -22,27 +22,14 @@
/* platform device data structures */
-struct msm_acpu_clock_platform_data
-{
- uint32_t acpu_switch_time_us;
- uint32_t max_speed_delta_khz;
- uint32_t vdd_switch_time_us;
- unsigned long power_collapse_khz;
- unsigned long wait_for_irq_khz;
-};
-
struct clk_lookup;
-extern struct sys_timer msm_timer;
-
/* common init routines for use by arch/arm/mach-msm/board-*.c */
void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
void __init msm_init_irq(void);
void __init msm_init_gpio(void);
void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
int __init msm_add_sdcc(unsigned int controller,
struct msm_mmc_platform_data *plat,
unsigned int stat_irq, unsigned long stat_irq_flags);
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 6c4046c..67dc0e9 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -105,11 +105,4 @@
#define MSM_AD5_PHYS 0xAC000000
#define MSM_AD5_SIZE (SZ_1M*13)
-#ifndef __ASSEMBLY__
-
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
- unsigned int mtype, void *caller);
-
-#endif
-
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index f944fe6..198202c 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -100,8 +100,4 @@
#define MSM_HSUSB_PHYS 0xA3600000
#define MSM_HSUSB_SIZE SZ_1K
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
-
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index a1752c0..9819a55 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -46,12 +46,8 @@
#define MSM8960_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x16440000
#endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
-
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index da77cc1..0faa894 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -122,8 +122,4 @@
#define MSM_SDC4_PHYS 0xA0600000
#define MSM_SDC4_SIZE SZ_4K
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
-
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 5aed57d..c6d38f1 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -63,12 +63,8 @@
#define MSM8X60_TMR0_SIZE SZ_4K
#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_BASE 0xF0040000
#define MSM_DEBUG_UART_PHYS 0x19C40000
#endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
-
#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
deleted file mode 100644
index f5fb2ec..0000000
--- a/arch/arm/mach-msm/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-msm/include/mach/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* low level hardware reset hook -- for example, hitting the
- * PSHOLD line on the PMIC to hard reset the system
- */
-extern void (*msm_hw_reset_hook)(void);
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index a1e7b11..3854f6f 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -29,30 +29,32 @@
#include <mach/board.h>
-#define MSM_CHIP_DEVICE(name, chip) { \
+#include "common.h"
+
+#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \
.virtual = (unsigned long) MSM_##name##_BASE, \
.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
.length = chip##_##name##_SIZE, \
- .type = MT_DEVICE_NONSHARED, \
+ .type = mem_type, \
}
+#define MSM_DEVICE_TYPE(name, mem_type) \
+ MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
+#define MSM_CHIP_DEVICE(name, chip) \
+ MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
- || defined(CONFIG_ARCH_MSM7X25)
+#if defined(CONFIG_ARCH_MSM7X00A)
static struct map_desc msm_io_desc[] __initdata = {
- MSM_DEVICE(VIC),
- MSM_CHIP_DEVICE(CSR, MSM7X00),
- MSM_DEVICE(DMOV),
- MSM_CHIP_DEVICE(GPIO1, MSM7X00),
- MSM_CHIP_DEVICE(GPIO2, MSM7X00),
- MSM_DEVICE(CLK_CTL),
+ MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
+ MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
defined(CONFIG_DEBUG_MSM_UART3)
- MSM_DEVICE(DEBUG_UART),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
- MSM_DEVICE(GCC),
+ MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
#endif
{
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index e012dc8..2d791e6 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -22,17 +22,12 @@
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
-#include <mach/msm_iomap.h>
-
#include "scm-boot.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
-
extern void msm_secondary_startup(void);
/*
* control for which core is the next to come out of the secondary
@@ -50,9 +45,6 @@
void __cpuinit platform_secondary_init(unsigned int cpu)
{
- /* Configure edge-triggered PPIs */
- writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 9980dc7..8f1eecd 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -19,7 +19,6 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/msm_iomap.h>
-#include <mach/system.h>
#include "proc_comm.h"
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
index 657be73..84183ed 100644
--- a/arch/arm/mach-msm/smd.c
+++ b/arch/arm/mach-msm/smd.c
@@ -30,7 +30,6 @@
#include <linux/delay.h>
#include <mach/msm_smd.h>
-#include <mach/system.h>
#include "smd_private.h"
#include "proc_comm.h"
@@ -39,8 +38,6 @@
#define CONFIG_QDSP6 1
#endif
-void (*msm_hw_reset_hook)(void);
-
#define MODULE_NAME "msm_smd"
enum {
@@ -101,10 +98,6 @@
pr_err("ARM9 has CRASHED\n");
smd_diag();
- /* hard reboot if possible */
- if (msm_hw_reset_hook)
- msm_hw_reset_hook();
-
/* in this case the modem or watchdog should reboot us */
for (;;)
;
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 81280825..476549a 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -1,7 +1,7 @@
/*
*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -20,15 +20,16 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
-#include <mach/msm_iomap.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
+#include "common.h"
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0004
@@ -36,7 +37,6 @@
#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
#define TIMER_ENABLE_EN BIT(0)
#define TIMER_CLEAR 0x000C
-#define DGT_CLK_CTL 0x0034
#define DGT_CLK_CTL_DIV_4 0x3
#define GPT_HZ 32768
@@ -101,7 +101,7 @@
static union {
struct clock_event_device *evt;
- struct clock_event_device __percpu **percpu_evt;
+ struct clock_event_device * __percpu *percpu_evt;
} msm_evt;
static void __iomem *source_base;
@@ -151,7 +151,7 @@
*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
clockevents_register_device(evt);
- enable_percpu_irq(evt->irq, 0);
+ enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
return 0;
}
@@ -172,44 +172,21 @@
return msm_clocksource.read(&msm_clocksource);
}
-static void __init msm_timer_init(void)
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+ bool percpu)
{
struct clock_event_device *ce = &msm_clockevent;
struct clocksource *cs = &msm_clocksource;
int res;
- u32 dgt_hz;
-
- if (cpu_is_msm7x01()) {
- event_base = MSM_CSR_BASE;
- source_base = MSM_CSR_BASE + 0x10;
- dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
- cs->read = msm_read_timer_count_shift;
- cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
- } else if (cpu_is_msm7x30()) {
- event_base = MSM_CSR_BASE + 0x04;
- source_base = MSM_CSR_BASE + 0x24;
- dgt_hz = 24576000 / 4;
- } else if (cpu_is_qsd8x50()) {
- event_base = MSM_CSR_BASE;
- source_base = MSM_CSR_BASE + 0x10;
- dgt_hz = 19200000 / 4;
- } else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
- event_base = MSM_TMR_BASE + 0x04;
- /* Use CPU0's timer as the global clock source. */
- source_base = MSM_TMR0_BASE + 0x24;
- dgt_hz = 27000000 / 4;
- writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- } else
- BUG();
writel_relaxed(0, event_base + TIMER_ENABLE);
writel_relaxed(0, event_base + TIMER_CLEAR);
writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
ce->cpumask = cpumask_of(0);
+ ce->irq = irq;
- ce->irq = INT_GP_TIMER_EXP;
clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
- if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ if (percpu) {
msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
if (!msm_evt.percpu_evt) {
pr_err("memory allocation failed for %s\n", ce->name);
@@ -219,7 +196,7 @@
res = request_percpu_irq(ce->irq, msm_timer_interrupt,
ce->name, msm_evt.percpu_evt);
if (!res) {
- enable_percpu_irq(ce->irq, 0);
+ enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
#ifdef CONFIG_LOCAL_TIMERS
local_timer_register(&msm_local_timer_ops);
#endif
@@ -238,10 +215,143 @@
res = clocksource_register_hz(cs, dgt_hz);
if (res)
pr_err("clocksource_register failed\n");
- setup_sched_clock(msm_sched_clock_read,
- cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
+ setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
}
-struct sys_timer msm_timer = {
- .init = msm_timer_init
+#ifdef CONFIG_OF
+static const struct of_device_id msm_dgt_match[] __initconst = {
+ { .compatible = "qcom,msm-dgt" },
+ { },
+};
+
+static const struct of_device_id msm_gpt_match[] __initconst = {
+ { .compatible = "qcom,msm-gpt" },
+ { },
+};
+
+static void __init msm_dt_timer_init(void)
+{
+ struct device_node *np;
+ u32 freq;
+ int irq;
+ struct resource res;
+ u32 percpu_offset;
+ void __iomem *dgt_clk_ctl;
+
+ np = of_find_matching_node(NULL, msm_gpt_match);
+ if (!np) {
+ pr_err("Can't find GPT DT node\n");
+ return;
+ }
+
+ event_base = of_iomap(np, 0);
+ if (!event_base) {
+ pr_err("Failed to map event base\n");
+ return;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0) {
+ pr_err("Can't get irq\n");
+ return;
+ }
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, msm_dgt_match);
+ if (!np) {
+ pr_err("Can't find DGT DT node\n");
+ return;
+ }
+
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("Failed to parse DGT resource\n");
+ return;
+ }
+
+ source_base = ioremap(res.start + percpu_offset, resource_size(&res));
+ if (!source_base) {
+ pr_err("Failed to map source base\n");
+ return;
+ }
+
+ if (!of_address_to_resource(np, 1, &res)) {
+ dgt_clk_ctl = ioremap(res.start + percpu_offset,
+ resource_size(&res));
+ if (!dgt_clk_ctl) {
+ pr_err("Failed to map DGT control base\n");
+ return;
+ }
+ writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
+ iounmap(dgt_clk_ctl);
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ pr_err("Unknown frequency\n");
+ return;
+ }
+ of_node_put(np);
+
+ msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+
+struct sys_timer msm_dt_timer = {
+ .init = msm_dt_timer_init
+};
+#endif
+
+static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+{
+ event_base = ioremap(event, SZ_64);
+ if (!event_base) {
+ pr_err("Failed to map event base\n");
+ return 1;
+ }
+ source_base = ioremap(source, SZ_64);
+ if (!source_base) {
+ pr_err("Failed to map source base\n");
+ return 1;
+ }
+ return 0;
+}
+
+static void __init msm7x01_timer_init(void)
+{
+ struct clocksource *cs = &msm_clocksource;
+
+ if (msm_timer_map(0xc0100000, 0xc0100010))
+ return;
+ cs->read = msm_read_timer_count_shift;
+ cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+ /* 600 KHz */
+ msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+ false);
+}
+
+struct sys_timer msm7x01_timer = {
+ .init = msm7x01_timer_init
+};
+
+static void __init msm7x30_timer_init(void)
+{
+ if (msm_timer_map(0xc0100004, 0xc0100024))
+ return;
+ msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+struct sys_timer msm7x30_timer = {
+ .init = msm7x30_timer_init
+};
+
+static void __init qsd8x50_timer_init(void)
+{
+ if (msm_timer_map(0xAC100000, 0xAC100010))
+ return;
+ msm_timer_init(19200000 / 4, 32, 7, false);
+}
+
+struct sys_timer qsd8x50_timer = {
+ .init = qsd8x50_timer_init
};
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index a9bc841..137e479 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -13,6 +13,7 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
#include "common.h"
/*
@@ -81,7 +82,7 @@
int maj, int min)
{
orion_setup_cpu_win(&addr_map_cfg, window, base, size,
- TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
+ TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 3057f7d..6b0c387 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -135,11 +135,6 @@
.length = MV78XX0_CORE_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = MV78XX0_PCIE_IO_VIRT_BASE(0),
- .pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
- .length = MV78XX0_PCIE_IO_SIZE * 8,
- .type = MT_DEVICE,
- }, {
.virtual = MV78XX0_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
.length = MV78XX0_REGS_SIZE,
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
deleted file mode 100644
index c7d9d00..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
- + MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a) __io(a)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index e807c4c..bd03fed 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -29,15 +29,15 @@
*
* virt phys size
* fe400000 f102x000 16K core-specific peripheral registers
- * fe700000 f0800000 1M PCIe #0 I/O space
- * fe800000 f0900000 1M PCIe #1 I/O space
- * fe900000 f0a00000 1M PCIe #2 I/O space
- * fea00000 f0b00000 1M PCIe #3 I/O space
- * feb00000 f0c00000 1M PCIe #4 I/O space
- * fec00000 f0d00000 1M PCIe #5 I/O space
- * fed00000 f0e00000 1M PCIe #6 I/O space
- * fee00000 f0f00000 1M PCIe #7 I/O space
- * fef00000 f1000000 1M on-chip peripheral registers
+ * fee00000 f0800000 64K PCIe #0 I/O space
+ * fee10000 f0900000 64K PCIe #1 I/O space
+ * fee20000 f0a00000 64K PCIe #2 I/O space
+ * fee30000 f0b00000 64K PCIe #3 I/O space
+ * fee40000 f0c00000 64K PCIe #4 I/O space
+ * fee50000 f0d00000 64K PCIe #5 I/O space
+ * fee60000 f0e00000 64K PCIe #6 I/O space
+ * fee70000 f0f00000 64K PCIe #7 I/O space
+ * fd000000 f1000000 1M on-chip peripheral registers
*/
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
@@ -46,11 +46,10 @@
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
#define MV78XX0_PCIE_IO_SIZE SZ_1M
#define MV78XX0_REGS_PHYS_BASE 0xf1000000
-#define MV78XX0_REGS_VIRT_BASE 0xfef00000
+#define MV78XX0_REGS_VIRT_BASE 0xfd000000
#define MV78XX0_REGS_SIZE SZ_1M
#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 2e56e86..26a059b 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -15,6 +15,7 @@
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
+#include <mach/mv78xx0.h>
#include "common.h"
struct pcie_port {
@@ -23,16 +24,13 @@
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
- char io_space_name[16];
char mem_space_name[16];
- struct resource res[2];
+ struct resource res;
};
static struct pcie_port pcie_port[8];
static int num_pcie_ports;
static struct resource pcie_io_space;
-static struct resource pcie_mem_space;
-
void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
{
@@ -40,102 +38,59 @@
*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
}
+u32 pcie_port_size[8] = {
+ 0,
+ 0x30000000,
+ 0x10000000,
+ 0x10000000,
+ 0x08000000,
+ 0x08000000,
+ 0x08000000,
+ 0x04000000,
+};
+
static void __init mv78xx0_pcie_preinit(void)
{
int i;
u32 size_each;
u32 start;
- int win;
+ int win = 0;
pcie_io_space.name = "PCIe I/O Space";
pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
pcie_io_space.end =
MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
- pcie_io_space.flags = IORESOURCE_IO;
+ pcie_io_space.flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pcie_io_space))
panic("can't allocate PCIe I/O space");
- pcie_mem_space.name = "PCIe MEM Space";
- pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
- pcie_mem_space.end =
- MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
- pcie_mem_space.flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pcie_mem_space))
- panic("can't allocate PCIe MEM space");
-
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
-
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d.%d I/O", pp->maj, pp->min);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
- pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
- pp->res[0].flags = IORESOURCE_IO;
-
- snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
- "PCIe %d.%d MEM", pp->maj, pp->min);
- pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
- pp->res[1].flags = IORESOURCE_MEM;
- }
-
- switch (num_pcie_ports) {
- case 0:
- size_each = 0;
- break;
-
- case 1:
- size_each = 0x30000000;
- break;
-
- case 2 ... 3:
- size_each = 0x10000000;
- break;
-
- case 4 ... 6:
- size_each = 0x08000000;
- break;
-
- case 7:
- size_each = 0x04000000;
- break;
-
- default:
+ if (num_pcie_ports > 7)
panic("invalid number of PCIe ports");
- }
+
+ size_each = pcie_port_size[num_pcie_ports];
start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
- pp->res[1].start = start;
- pp->res[1].end = start + size_each - 1;
+ snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+ "PCIe %d.%d MEM", pp->maj, pp->min);
+ pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+ pp->res.name = pp->mem_space_name;
+ pp->res.flags = IORESOURCE_MEM;
+ pp->res.start = start;
+ pp->res.end = start + size_each - 1;
start += size_each;
- }
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
-
- if (request_resource(&pcie_io_space, &pp->res[0]))
- panic("can't allocate PCIe I/O sub-space");
-
- if (request_resource(&pcie_mem_space, &pp->res[1]))
+ if (request_resource(&iomem_resource, &pp->res))
panic("can't allocate PCIe MEM sub-space");
- }
- win = 0;
- for (i = 0; i < num_pcie_ports; i++) {
- struct pcie_port *pp = pcie_port + i;
-
- mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
- resource_size(&pp->res[0]),
- pp->maj, pp->min);
-
- mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
- resource_size(&pp->res[1]),
+ mv78xx0_setup_pcie_mem_win(win + i + 8, pp->res.start,
+ resource_size(&pp->res),
pp->maj, pp->min);
+
+ mv78xx0_setup_pcie_io_win(win + i, i * SZ_64K, SZ_64K,
+ pp->maj, pp->min);
}
}
@@ -156,8 +111,9 @@
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base);
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+
+ pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
return 1;
}
@@ -281,7 +237,7 @@
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
- memset(pp->res, 0, sizeof(pp->res));
+ memset(&pp->res, 0, sizeof(pp->res));
} else {
printk("link down, ignoring\n");
}
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 9a8bbda..ecc4319 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -1,7 +1,5 @@
if ARCH_MXS
-source "arch/arm/mach-mxs/devices/Kconfig"
-
config SOC_IMX23
bool
select ARM_AMBA
@@ -27,91 +25,4 @@
Include support for Freescale MXS platforms(i.MX23 and i.MX28)
using the device tree for discovery
-config MACH_STMP378X_DEVB
- bool "Support STMP378x_devb Platform"
- select SOC_IMX23
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for STMP378x-devb platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX23EVK
- bool "Support MX23EVK Platform"
- select SOC_IMX23
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for MX23EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX28EVK
- bool "Support MX28EVK Platform"
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_FLEXCAN
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
- select MXS_HAVE_PLATFORM_MXS_SAIF
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- help
- Include support for MX28EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MODULE_TX28
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXS_PWM
- select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_FLEXCAN
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXSFB
-
-config MODULE_APX4
- bool
- select SOC_IMX28
- select LEDS_GPIO_REGISTER
- select MXS_HAVE_AMBA_DUART
- select MXS_HAVE_PLATFORM_AUART
- select MXS_HAVE_PLATFORM_FEC
- select MXS_HAVE_PLATFORM_MXS_I2C
- select MXS_HAVE_PLATFORM_MXS_MMC
- select MXS_HAVE_PLATFORM_MXS_SAIF
-
-config MACH_TX28
- bool "Ka-Ro TX28 module"
- select MODULE_TX28
-
-config MACH_M28EVK
- bool "Support DENX M28EVK Platform"
- select MODULE_M28
-
-config MACH_APX4DEVKIT
- bool "Support Bluegiga APX4 Development Kit"
- select MODULE_APX4
-
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index fed3695..3d3c8a9 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,15 +1,6 @@
# Common support
-obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o timer.o mm.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28) += mach-tx28.o
-
-obj-y += devices/
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 4582999..8bd23a8 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -5,6 +5,7 @@
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
+ imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb \
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
deleted file mode 100644
index 9ee5ced..0000000
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx23_add_duart(void)
-{
- struct amba_device *d;
-
- d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
- MX23_INT_DUART, 0, 0, 0);
- return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0() mx23_add_auart(0)
-#define mx23_add_auart1() mx23_add_auart(1)
-
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata) \
- mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
- mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-
-#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx23_add_mxsfb(
- const struct mxsfb_platform_data *pdata);
-
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
deleted file mode 100644
index fcab431..0000000
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-
-static inline int mx28_add_duart(void)
-{
- struct amba_device *d;
-
- d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
- MX28_INT_DUART, 0, 0, 0);
- return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0() mx28_add_auart(0)
-#define mx28_add_auart1() mx28_add_auart(1)
-#define mx28_add_auart2() mx28_add_auart(2)
-#define mx28_add_auart3() mx28_add_auart(3)
-#define mx28_add_auart4() mx28_add_auart(4)
-
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
- mxs_add_fec(&mx28_fec_data[id], pdata)
-
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata) \
- mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata)
-
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata) \
- mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
- mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-
-#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx28_add_mxsfb(
- const struct mxsfb_platform_data *pdata);
-
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
- mxs_add_saif(&mx28_saif_data[id], pdata)
-
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
deleted file mode 100644
index cf50b5a..0000000
--- a/arch/arm/mach-mxs/devices.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-struct platform_device *__init mxs_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev;
-
- pdev = platform_device_alloc(name, id);
- if (!pdev)
- goto err;
-
- if (dmamask) {
- /*
- * This memory isn't freed when the device is put,
- * I don't have a nice idea for that though. Conceptually
- * dma_mask in struct device should not be a pointer.
- * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
- */
- pdev->dev.dma_mask =
- kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask)
- /* ret is still -ENOMEM; */
- goto err;
-
- *pdev->dev.dma_mask = dmamask;
- pdev->dev.coherent_dma_mask = dmamask;
- }
-
- if (res) {
- ret = platform_device_add_resources(pdev, res, num_resources);
- if (ret)
- goto err;
- }
-
- if (data) {
- ret = platform_device_add_data(pdev, data, size_data);
- if (ret)
- goto err;
- }
-
- ret = platform_device_add(pdev);
- if (ret) {
-err:
- if (dmamask)
- kfree(pdev->dev.dma_mask);
- platform_device_put(pdev);
- return ERR_PTR(ret);
- }
-
- return pdev;
-}
-
-struct device mxs_apbh_bus = {
- .init_name = "mxs_apbh",
- .parent = &platform_bus,
-};
-
-static int __init mxs_device_init(void)
-{
- return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
deleted file mode 100644
index 19659de..0000000
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-config MXS_HAVE_AMBA_DUART
- bool
-
-config MXS_HAVE_PLATFORM_AUART
- bool
-
-config MXS_HAVE_PLATFORM_FEC
- bool
-
-config MXS_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN if CAN
- bool
-
-config MXS_HAVE_PLATFORM_GPMI_NAND
- bool
-
-config MXS_HAVE_PLATFORM_MXS_I2C
- bool
-
-config MXS_HAVE_PLATFORM_MXS_MMC
- bool
-
-config MXS_HAVE_PLATFORM_MXS_PWM
- bool
-
-config MXS_HAVE_PLATFORM_MXSFB
- bool
-
-config MXS_HAVE_PLATFORM_MXS_SAIF
- bool
-
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
- bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
deleted file mode 100644
index 5f72d97..0000000
--- a/arch/arm/mach-mxs/devices/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c
deleted file mode 100644
index 27608f5..0000000
--- a/arch/arm/mach-mxs/devices/platform-auart.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_auart_data_entry_single(soc, _id, hwid) \
- { \
- .id = _id, \
- .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \
- .irq = soc ## _INT_AUART ## hwid, \
- }
-
-#define mxs_auart_data_entry(soc, _id, hwid) \
- [_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid) \
- mxs_auart_data_entry(MX23, _id, hwid)
- mx23_auart_data_entry(0, 1),
- mx23_auart_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id) \
- mxs_auart_data_entry(MX28, _id, _id)
- mx28_auart_data_entry(0),
- mx28_auart_data_entry(1),
- mx28_auart_data_entry(2),
- mx28_auart_data_entry(3),
- mx28_auart_data_entry(4),
-};
-#endif
-
-struct platform_device *__init mxs_add_auart(
- const struct mxs_auart_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device_dmamask("mxs-auart", data->id,
- res, ARRAY_SIZE(res), NULL, 0,
- DMA_BIT_MASK(32));
-}
-
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
deleted file mode 100644
index 4682450..0000000
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_dma(const char *devid,
- resource_size_t base)
-{
- struct resource res[] = {
- {
- .start = base,
- .end = base + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }
- };
-
- return mxs_add_platform_device_dmamask(devid, -1,
- res, ARRAY_SIZE(res), NULL, 0,
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
deleted file mode 100644
index ae96a4f..0000000
--- a/arch/arm/mach-mxs/devices/platform-fec.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_fec_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \
- .irq = soc ## _INT_ENET_MAC ## _id, \
- }
-
-#define mxs_fec_data_entry(soc, _id) \
- [_id] = mxs_fec_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id) \
- mxs_fec_data_entry(MX28, _id)
- mx28_fec_data_entry(0),
- mx28_fec_data_entry(1),
-};
-#endif
-
-struct platform_device *__init mxs_add_fec(
- const struct mxs_fec_data *data,
- const struct fec_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx28-fec", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
- DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c
deleted file mode 100644
index 43a6b4b..0000000
--- a/arch/arm/mach-mxs/devices/platform-flexcan.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- * Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \
- { \
- .id = _id, \
- .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CAN ## _hwid, \
- }
-
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \
- [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid) \
- mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
- mx28_flexcan_data_entry(0, 0),
- mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-
-struct platform_device *__init mxs_add_flexcan(
- const struct mxs_flexcan_data *data,
- const struct flexcan_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("flexcan", data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
deleted file mode 100644
index cd99f19..0000000
--- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_gpio(
- char *name, int id, resource_size_t iobase, int irq)
-{
- struct resource res[] = {
- {
- .start = iobase,
- .end = iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return platform_device_register_resndata(&mxs_apbh_bus,
- name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
deleted file mode 100644
index 3e22df5..0000000
--- a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
- .devid = "imx23-gpmi-nand",
- .res = {
- /* GPMI */
- DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
- GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
- GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
- /* BCH */
- DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
- GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
- GPMI_NAND_BCH_INTERRUPT_RES_NAME),
- /* DMA */
- DEFINE_RES_NAMED(MX23_DMA_GPMI0,
- MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
- GPMI_NAND_DMA_CHANNELS_RES_NAME,
- IORESOURCE_DMA),
- DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
- GPMI_NAND_DMA_INTERRUPT_RES_NAME),
- },
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
- .devid = "imx28-gpmi-nand",
- .res = {
- /* GPMI */
- DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
- GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
- GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
- /* BCH */
- DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
- GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
- DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
- GPMI_NAND_BCH_INTERRUPT_RES_NAME),
- /* DMA */
- DEFINE_RES_NAMED(MX28_DMA_GPMI0,
- MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
- GPMI_NAND_DMA_CHANNELS_RES_NAME,
- IORESOURCE_DMA),
- DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
- GPMI_NAND_DMA_INTERRUPT_RES_NAME),
- },
-};
-#endif
-
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
- const struct mxs_gpmi_nand_data *data)
-{
- return mxs_add_platform_device_dmamask(data->devid, -1,
- data->res, GPMI_NAND_RES_SIZE,
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
deleted file mode 100644
index 79222ec..0000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_i2c_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \
- .errirq = soc ## _INT_I2C ## _id ## _ERROR, \
- .dmairq = soc ## _INT_I2C ## _id ## _DMA, \
- }
-
-#define mxs_i2c_data_entry(soc, _id) \
- [_id] = mxs_i2c_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
- mxs_i2c_data_entry(MX28, 0),
- mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_i2c(
- const struct mxs_mxs_i2c_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->errirq,
- .end = data->errirq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dmairq,
- .end = data->dmairq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("mxs-i2c", data->id, res,
- ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
deleted file mode 100644
index b33c9d0..0000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \
- { \
- .devid = _devid, \
- .id = _id, \
- .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \
- .dma = soc ## _DMA_SSP ## hwid, \
- .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \
- .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \
- }
-
-#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \
- [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
-
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
- mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
- mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_mmc(
- const struct mxs_mxs_mmc_data *data,
- const struct mxs_mmc_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->dma,
- .end = data->dma,
- .flags = IORESOURCE_DMA,
- }, {
- .start = data->irq_err,
- .end = data->irq_err,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq_dma,
- .end = data->irq_dma,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device(data->devid, data->id,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
deleted file mode 100644
index 680f5a9..0000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
- struct resource res = {
- .flags = IORESOURCE_MEM,
- };
-
- res.start = iobase + 0x10 + 0x20 * id;
- res.end = res.start + 0x1f;
-
- return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
deleted file mode 100644
index f6e3a60..0000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_saif_data_entry_single(soc, _id) \
- { \
- .id = _id, \
- .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \
- .irq = soc ## _INT_SAIF ## _id, \
- .dma = soc ## _DMA_SAIF ## _id, \
- .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \
- }
-
-#define mxs_saif_data_entry(soc, _id) \
- [_id] = mxs_saif_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
- mxs_saif_data_entry(MX28, 0),
- mxs_saif_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
- const struct mxs_saif_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->dma,
- .end = data->dma,
- .flags = IORESOURCE_DMA,
- }, {
- .start = data->dmairq,
- .end = data->dmairq,
- .flags = IORESOURCE_IRQ,
- },
-
- };
-
- return mxs_add_platform_device("mxs-saif", data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
deleted file mode 100644
index 76b53f73..0000000
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
- const struct mxsfb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = MX23_LCDIF_BASE_ADDR,
- .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx23-fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
- const struct mxsfb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = MX28_LCDIF_BASE_ADDR,
- .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
- };
-
- return mxs_add_platform_device_dmamask("imx28-fb", -1,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
deleted file mode 100644
index 639eaee..0000000
--- a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
- struct resource res[] = {
- {
- .start = MX23_RTC_BASE_ADDR,
- .end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX23_INT_RTC_ALARM,
- .end = MX23_INT_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
- NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
- struct resource res[] = {
- {
- .start = MX28_RTC_BASE_ADDR,
- .end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX28_INT_RTC_ALARM,
- .end = MX28_INT_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
- NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index de6c7ba..4dec795 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -17,21 +17,12 @@
extern void mxs_restart(char, const char *);
extern int mxs_saif_clkmux_select(unsigned int clkmux);
-extern void mx23_soc_init(void);
extern int mx23_clocks_init(void);
extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
-extern void mx28_soc_init(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
extern void icoll_init_irq(void);
-extern struct platform_device *mxs_add_dma(const char *devid,
- resource_size_t base);
-extern struct platform_device *mxs_add_gpio(char *name, int id,
- resource_size_t iobase, int irq);
-
#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
deleted file mode 100644
index e8b1d95..0000000
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-
-extern struct device mxs_apbh_bus;
-
-struct platform_device *mxs_add_platform_device_dmamask(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data, u64 dmamask);
-
-static inline struct platform_device *mxs_add_platform_device(
- const char *name, int id,
- const struct resource *res, unsigned int num_resources,
- const void *data, size_t size_data)
-{
- return mxs_add_platform_device_dmamask(
- name, id, res, num_resources, data, size_data, 0);
-}
-
-/* auart */
-struct mxs_auart_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
- const struct mxs_auart_data *data);
-
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
- const struct mxs_fec_data *data,
- const struct fec_platform_data *pdata);
-
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
- int id;
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
- const struct mxs_flexcan_data *data,
- const struct flexcan_platform_data *pdata);
-
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
- const char *devid;
- const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
- const struct mxs_gpmi_nand_data *data);
-
-/* i2c */
-struct mxs_mxs_i2c_data {
- int id;
- resource_size_t iobase;
- resource_size_t errirq;
- resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
- const struct mxs_mxs_i2c_data *data);
-
-/* mmc */
-#include <linux/mmc/mxs-mmc.h>
-struct mxs_mxs_mmc_data {
- const char *devid;
- int id;
- resource_size_t iobase;
- resource_size_t dma;
- resource_size_t irq_err;
- resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
- const struct mxs_mxs_mmc_data *data,
- const struct mxs_mmc_platform_data *pdata);
-
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
- resource_size_t iobase, int id);
-
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
- int id;
- resource_size_t iobase;
- resource_size_t irq;
- resource_size_t dma;
- resource_size_t dmairq;
-};
-
-struct platform_device *__init mxs_add_saif(
- const struct mxs_saif_data *data,
- const struct mxs_saif_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
deleted file mode 100644
index b0190a4..0000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- * BANK PIN MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
deleted file mode 100644
index f50fefd..0000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx28.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- * BANK PIN MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-
-#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-
-#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-
-#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-
-#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-
-#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-
-#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
deleted file mode 100644
index 7abdf58..0000000
--- a/arch/arm/mach-mxs/include/mach/iomux.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK: 0..2 (3)
- * PAD_PIN: 3..7 (5)
- * PAD_MUXSEL: 8..9 (2)
- * PAD_MA: 10..11 (2)
- * PAD_MA_VALID: 12 (1)
- * PAD_VOL: 13 (1)
- * PAD_VOL_VALID: 14 (1)
- * PAD_PULL: 15 (1)
- * PAD_PULL_VALID: 16 (1)
- * RESERVED: 17..31 (15)
- */
-typedef u32 iomux_cfg_t;
-
-#define MXS_PAD_BANK_SHIFT 0
-#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT 3
-#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT 8
-#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT 10
-#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT 12
-#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT 13
-#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT 14
-#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT 15
-#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-
-#define PAD_MUXSEL_0 0
-#define PAD_MUXSEL_1 1
-#define PAD_MUXSEL_2 2
-#define PAD_MUXSEL_GPIO 3
-
-#define PAD_4MA 0
-#define PAD_8MA 1
-#define PAD_12MA 2
-#define PAD_16MA 3
-
-#define PAD_1V8 0
-#define PAD_3V3 1
-
-#define PAD_NOPULL 0
-#define PAD_PULLUP 1
-
-#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
- MXS_PAD_MA_VALID_MASK)
-
-#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
- MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
- MXS_PAD_VOL_VALID_MASK)
-
-#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
- MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
- MXS_PAD_PULL_VALID_MASK)
-
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
- (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
- ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
- ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
- ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
- ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
- ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
- MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
- return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-
-#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c
deleted file mode 100644
index 0e804e2..0000000
--- a/arch/arm/mach-mxs/iomux.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- * <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
- u32 reg, ofs, bp, bm;
- void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-
- /* muxsel */
- ofs = 0x100;
- ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
- bp = PAD_PIN(pad) % 16 * 2;
- bm = 0x3 << bp;
- reg = __raw_readl(iomux_base + ofs);
- reg &= ~bm;
- reg |= PAD_MUXSEL(pad) << bp;
- __raw_writel(reg, iomux_base + ofs);
-
- /* drive */
- ofs = cpu_is_mx23() ? 0x200 : 0x300;
- ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
- /* mA */
- if (PAD_MA_VALID(pad)) {
- bp = PAD_PIN(pad) % 8 * 4;
- bm = 0x3 << bp;
- reg = __raw_readl(iomux_base + ofs);
- reg &= ~bm;
- reg |= PAD_MA(pad) << bp;
- __raw_writel(reg, iomux_base + ofs);
- }
- /* vol */
- if (PAD_VOL_VALID(pad)) {
- bp = PAD_PIN(pad) % 8 * 4 + 2;
- if (PAD_VOL(pad))
- __mxs_setl(1 << bp, iomux_base + ofs);
- else
- __mxs_clrl(1 << bp, iomux_base + ofs);
- }
-
- /* pull */
- if (PAD_PULL_VALID(pad)) {
- ofs = cpu_is_mx23() ? 0x400 : 0x600;
- ofs += PAD_BANK(pad) * 0x10;
- bp = PAD_PIN(pad);
- if (PAD_PULL(pad))
- __mxs_setl(1 << bp, iomux_base + ofs);
- else
- __mxs_clrl(1 << bp, iomux_base + ofs);
- }
-
- return 0;
-}
-
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
- const iomux_cfg_t *p = pad_list;
- int i;
- int ret;
-
- for (i = 0; i < count; i++) {
- ret = mxs_iomux_setup_pad(*p);
- if (ret)
- return ret;
- p++;
- }
-
- return 0;
-}
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
deleted file mode 100644
index f5f0617..0000000
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
- /* duart */
- MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
- /* auart1 */
- MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
- /* auart2 */
- MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
- MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
- /* auart3 */
- MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
- /* i2c */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
- /* saif0 & saif1 */
- MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
- {
- .name = "user-led",
- .default_trigger = "heartbeat",
- .gpio = APX4DEVKIT_GPIO_USERLED,
- },
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
- .leds = apx4devkit_leds,
- .num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
- .wp_gpio = -EINVAL,
- .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
- { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
- { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
- defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("VDDA", "0-000a"),
- REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .always_on = 1,
- },
- .consumer_supplies = apx4devkit_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 1,
- .init_data = &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &apx4devkit_vdd_pdata,
- },
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
- platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
- apx4devkit_mxs_saif_pdata[] __initconst = {
- /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
- {
- .master_mode = 1,
- .master_id = 0,
- }, {
- .master_mode = 0,
- .master_id = 0,
- },
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
- phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
- return 0;
-}
-
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
- struct clk *clk;
-
- /* Enable fec phy clock */
- clk = clk_get_sys("enet_out", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-}
-
-static void __init apx4devkit_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(apx4devkit_pads,
- ARRAY_SIZE(apx4devkit_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart1();
- mx28_add_auart2();
- mx28_add_auart3();
-
- /*
- * Register fixup for the Micrel KS8031 PHY clock
- * (shares same ID with KS8051)
- */
- phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
- apx4devkit_phy_fixup);
-
- apx4devkit_fec_phy_clk_enable();
- mx28_add_fec(0, &mx28_fec_pdata);
-
- mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
- gpio_led_register_device(0, &apx4devkit_led_data);
-
- mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
- mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
- mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
- apx4devkit_add_regulators();
-
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
- ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
- mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
- .init = apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &apx4devkit_timer,
- .init_machine = apx4devkit_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
deleted file mode 100644
index 4c00c87..0000000
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
- /* duart */
- MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
- /* auart3 */
- MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
- /* fec1 */
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
- /* flexcan0 */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* flexcan1 */
- MX28_PAD_GPMI_CE2N__CAN1_TX,
- MX28_PAD_GPMI_CE3N__CAN1_RX,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* mxsfb (lcdif) */
- MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
- MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* mmc1 */
- MX28_PAD_GPMI_D00__SSP1_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D01__SSP1_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D02__SSP1_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D03__SSP1_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D04__SSP1_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D05__SSP1_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D06__SSP1_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D07__SSP1_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY1__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_WRN__SSP1_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_GPMI_RESETN__GPIO_0_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM4__GPIO_3_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
- MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
- /* nand */
- MX28_PAD_GPMI_D00__GPMI_D0 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D01__GPMI_D1 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D02__GPMI_D2 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D03__GPMI_D3 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D04__GPMI_D4 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D05__GPMI_D5 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D06__GPMI_D6 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_D07__GPMI_D7 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_CE0N__GPMI_CE0N |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_RDY0__GPMI_READY0 |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_ALE__GPMI_ALE |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_CLE__GPMI_CLE |
- (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RESETN__GPMI_RESETN |
- (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
- /* Backlight */
- MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
- {
- .name = "user-led1",
- .default_trigger = "heartbeat",
- .gpio = M28EVK_GPIO_USERLED1,
- },
- {
- .name = "user-led2",
- .default_trigger = "heartbeat",
- .gpio = M28EVK_GPIO_USERLED2,
- },
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
- .leds = m28evk_leds,
- .num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
- {
- /* fec0 */
- .phy = PHY_INTERFACE_MODE_RMII,
- }, {
- /* fec1 */
- .phy = PHY_INTERFACE_MODE_RMII,
- },
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
- int i;
- u32 val;
- const u32 *ocotp = mxs_get_ocotp();
-
- if (!ocotp)
- return -ETIMEDOUT;
-
- /*
- * OCOTP only stores the last 4 octets for each mac address,
- * so hard-code DENX OUI (C0:E5:4E) here.
- */
- for (i = 0; i < 2; i++) {
- val = ocotp[i];
- mx28_fec_pdata[i].mac[0] = 0xC0;
- mx28_fec_pdata[i].mac[1] = 0xE5;
- mx28_fec_pdata[i].mac[2] = 0x4E;
- mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
- mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
- mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
- }
-
- return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
- {
- .name = "Ampire AM-800480R2TMQW-T01H",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30066, /* picosecond (33.26 MHz) */
- .left_margin = 0,
- .right_margin = 256,
- .upper_margin = 0,
- .lower_margin = 45,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
- },
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
- .mode_list = m28evk_video_modes,
- .mode_count = ARRAY_SIZE(m28evk_video_modes),
- .default_bpp = 16,
- .ld_intf_width = STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
- .byte_len = 16384,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
- {
- I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
- .platform_data = &m28evk_eeprom,
- },
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
- {
- /* mmc0 */
- .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- }, {
- /* mmc1 */
- .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- },
-};
-
-static void __init m28evk_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart3();
-
- if (!m28evk_fec_get_mac()) {
- mx28_add_fec(0, &mx28_fec_pdata[0]);
- mx28_add_fec(1, &mx28_fec_pdata[1]);
- }
-
- mx28_add_flexcan(0, NULL);
- mx28_add_flexcan(1, NULL);
-
- mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
- mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
- mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
- gpio_led_register_device(0, &m28evk_led_data);
-
- /* I2C */
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
- ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
- .init = m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &m28evk_timer,
- .init_machine = m28evk_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
deleted file mode 100644
index e7272a4..0000000
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
- /* duart */
- MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart */
- MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
- MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
- MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
- MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
- /* mxsfb (lcdif) */
- MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
- MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
- MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
- MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
- MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
- MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
- /* LCD panel enable */
- MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
- /* backlight control */
- MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
- /* mmc */
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D08__SSP1_DATA4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D09__SSP1_DATA5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D10__SSP1_DATA6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_GPMI_D11__SSP1_DATA7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_CMD__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DETECT__SSP1_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_SSP1_SCK__SSP1_SCK |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX23_PAD_PWM4__GPIO_1_30 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX23_PAD_PWM3__GPIO_1_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
- {
- .name = "Samsung-LMS430HF02",
- .refresh = 60,
- .xres = 480,
- .yres = 272,
- .pixclock = 108096, /* picosecond (9.2 MHz) */
- .left_margin = 15,
- .right_margin = 8,
- .upper_margin = 12,
- .lower_margin = 4,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
- .mode_list = mx23evk_video_modes,
- .mode_count = ARRAY_SIZE(mx23evk_video_modes),
- .default_bpp = 32,
- .ld_intf_width = STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
- .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
- int ret;
-
- mx23_soc_init();
-
- mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
- mx23_add_duart();
- mx23_add_auart0();
-
- /* power on mmc slot by writing 0 to the gpio */
- ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
- "mmc0-slot-power");
- if (ret)
- pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
- ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
- if (ret)
- pr_warn("failed to request gpio lcd-enable: %d\n", ret);
- else
- gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
- ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
- if (ret)
- pr_warn("failed to request gpio bl-enable: %d\n", ret);
- else
- gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
- mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
- mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
- mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
- .init = mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .map_io = mx23_map_io,
- .init_irq = mx23_init_irq,
- .timer = &mx23evk_timer,
- .init_machine = mx23evk_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
deleted file mode 100644
index dafd48e..0000000
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
- /* duart */
- MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
- MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
- /* auart0 */
- MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
- /* auart3 */
- MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
- MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
- MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
- /* fec0 */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
- /* fec1 */
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
- /* phy power line */
- MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
- /* phy reset line */
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
- /* flexcan0 */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
- /* flexcan1 */
- MX28_PAD_GPMI_CE2N__CAN1_TX,
- MX28_PAD_GPMI_CE3N__CAN1_RX,
- /* transceiver power control */
- MX28_PAD_SSP1_CMD__GPIO_2_13,
-
- /* mxsfb (lcdif) */
- MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
- MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
- MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
- MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
- MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
- MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
- /* LCD panel enable */
- MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
- /* backlight control */
- MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
- /* mmc0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_SSP1_SCK__GPIO_2_12 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM3__GPIO_3_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* mmc1 */
- MX28_PAD_GPMI_D00__SSP1_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D01__SSP1_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D02__SSP1_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D03__SSP1_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D04__SSP1_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D05__SSP1_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D06__SSP1_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_D07__SSP1_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY1__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_GPMI_WRN__SSP1_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* write protect */
- MX28_PAD_GPMI_RESETN__GPIO_0_28 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- /* slot power enable */
- MX28_PAD_PWM4__GPIO_3_29 |
- (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
- /* led */
- MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_I2C0_SDA__I2C0_SDA |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
- /* saif0 & saif1 */
- MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
- {
- .name = "GPIO-LED",
- .default_trigger = "heartbeat",
- .gpio = MX28EVK_GPIO_LED,
- },
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
- .leds = mx28evk_leds,
- .num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
- struct clk *clk;
-
- /* Enable fec phy clock */
- clk = clk_get_sys("enet_out", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
- mdelay(1);
- gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
- {
- /* fec0 */
- .phy = PHY_INTERFACE_MODE_RMII,
- }, {
- /* fec1 */
- .phy = PHY_INTERFACE_MODE_RMII,
- },
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
- int i;
- u32 val;
- const u32 *ocotp = mxs_get_ocotp();
-
- if (!ocotp)
- return -ETIMEDOUT;
-
- /*
- * OCOTP only stores the last 4 octets for each mac address,
- * so hard-code Freescale OUI (00:04:9f) here.
- */
- for (i = 0; i < 2; i++) {
- val = ocotp[i];
- mx28_fec_pdata[i].mac[0] = 0x00;
- mx28_fec_pdata[i].mac[1] = 0x04;
- mx28_fec_pdata[i].mac[2] = 0x9f;
- mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
- mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
- mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
- }
-
- return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
- if (flexcan0_en || flexcan1_en)
- gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
- else
- gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
- flexcan0_en = enable;
- mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
- flexcan1_en = enable;
- mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
- mx28evk_flexcan_pdata[] __initconst = {
- {
- .transceiver_switch = mx28evk_flexcan0_switch,
- }, {
- .transceiver_switch = mx28evk_flexcan1_switch,
- }
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
- {
- .name = "Seiko-43WVF1G",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
- .mode_list = mx28evk_video_modes,
- .mode_count = ARRAY_SIZE(mx28evk_video_modes),
- .default_bpp = 32,
- .ld_intf_width = STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
- {
- /* mmc0 */
- .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- }, {
- /* mmc1 */
- .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
- .flags = SLOTF_8_BIT_CAPABLE,
- },
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("sgtl5000", 0x0a),
- },
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("VDDA", "0-000a"),
- REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .always_on = 1,
- },
- .consumer_supplies = mx28evk_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 1,
- .init_data = &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &mx28evk_vdd_pdata,
- },
-};
-static void __init mx28evk_add_regulators(void)
-{
- platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
- { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
- { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
- { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
- { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
- { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
- { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
- { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
- mx28evk_mxs_saif_pdata[] __initconst = {
- /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
- {
- .master_mode = 1,
- .master_id = 0,
- }, {
- .master_mode = 0,
- .master_id = 0,
- },
-};
-
-static void __init mx28evk_init(void)
-{
- int ret;
-
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
- mx28_add_duart();
- mx28_add_auart0();
- mx28_add_auart3();
-
- if (mx28evk_fec_get_mac())
- pr_warn("%s: failed on fec mac setup\n", __func__);
-
- ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
- if (ret)
- pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
- mx28evk_fec_reset();
- mx28_add_fec(0, &mx28_fec_pdata[0]);
- mx28_add_fec(1, &mx28_fec_pdata[1]);
-
- mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
- mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
- mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
- mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
- mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, mxs_i2c0_board_info,
- ARRAY_SIZE(mxs_i2c0_board_info));
-
- mx28evk_add_regulators();
-
- mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
- NULL, 0);
-
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
- mx28_add_rtc_stmp3xxx();
-
- gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
- .init = mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &mx28evk_timer,
- .init_machine = mx28evk_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8dabfe8..433af89 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -12,8 +12,10 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/micrel_phy.h>
@@ -21,9 +23,12 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
static struct fb_videomode mx23evk_video_modes[] = {
{
@@ -99,9 +104,40 @@
static struct mxsfb_platform_data mxsfb_pdata __initdata;
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
+
+static int flexcan0_en, flexcan1_en;
+
+static void mx28evk_flexcan_switch(void)
+{
+ if (flexcan0_en || flexcan1_en)
+ gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+ else
+ gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+
+static void mx28evk_flexcan0_switch(int enable)
+{
+ flexcan0_en = enable;
+ mx28evk_flexcan_switch();
+}
+
+static void mx28evk_flexcan1_switch(int enable)
+{
+ flexcan1_en = enable;
+ mx28evk_flexcan_switch();
+}
+
+static struct flexcan_platform_data flexcan_pdata[2];
+
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+ OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
{ /* sentinel */ }
};
@@ -237,13 +273,21 @@
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
+static void __init imx28_evk_post_init(void)
+{
+ if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+ "flexcan-switch")) {
+ flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+ flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+ }
}
static void __init m28evk_init(void)
{
- enable_clk_enet_out();
- update_fec_mac_prop(OUI_DENX);
-
mxsfb_pdata.mode_list = m28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
@@ -270,6 +314,80 @@
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
+#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+ { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+ { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+ { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+ { ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+ { ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+ { ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+ { ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+ { ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+ { ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+ { TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+ { TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+ { TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev;
+ struct pinctrl *pctl;
+ int ret;
+
+ enable_clk_enet_out();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_err("%s: failed to find fec device\n", __func__);
+ return;
+ }
+
+ pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+ if (IS_ERR(pctl)) {
+ pr_err("%s: failed to get pinctrl state\n", __func__);
+ return;
+ }
+
+ ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+ if (ret) {
+ pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+ return;
+ }
+
+ /* Power up fec phy */
+ gpio_set_value(TX28_FEC_PHY_POWER, 1);
+ msleep(26); /* 25ms according to data sheet */
+
+ /* Mode strap pins */
+ gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+ gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+ gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+ udelay(100); /* minimum assertion time for nRST */
+
+ /* Deasserting FEC PHY RESET */
+ gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+ pinctrl_put(pctl);
+}
+
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -283,22 +401,20 @@
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
+
+ if (of_machine_is_compatible("karo,tx28"))
+ tx28_post_init();
+
+ if (of_machine_is_compatible("fsl,imx28-evk"))
+ imx28_evk_post_init();
}
static const char *imx23_dt_compat[] __initdata = {
- "fsl,imx23-evk",
- "fsl,stmp378x_devb"
- "olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
- "bluegiga,apx4devkit",
- "crystalfontz,cfa10036",
- "denx,m28evk",
- "fsl,imx28-evk",
- "karo,tx28",
"fsl,imx28",
NULL,
};
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index 6548965..0000000
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
- /* duart (extended setup missing in old boardcode, too */
- MX23_PAD_PWM0__DUART_RX,
- MX23_PAD_PWM1__DUART_TX,
-
- /* auart */
- MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
- MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
- /* mmc */
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_CMD__SSP1_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX23_PAD_SSP1_DETECT__SSP1_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_SSP1_SCK__SSP1_SCK |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
- MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
- .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
- {
- .modalias = "enc28j60",
- .max_speed_hz = 6 * 1000 * 1000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = NULL,
- },
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
- int ret;
-
- mx23_soc_init();
-
- mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
- ARRAY_SIZE(stmp378x_dvb_pads));
-
- mx23_add_duart();
- mx23_add_auart0();
- mx23_add_rtc_stmp3xxx();
-
- /* power on mmc slot */
- ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
- GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
- if (ret)
- pr_warn("could not power mmc (%d)\n", ret);
-
- mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
- mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
- .init = stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
- .map_io = mx23_map_io,
- .init_irq = mx23_init_irq,
- .timer = &stmp378x_dvb_timer,
- .init_machine = stmp378x_dvb_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
deleted file mode 100644
index 8837029..0000000
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
- /* LED */
- MX28_PAD_ENET0_RXD3__GPIO_4_10 |
- MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
- /* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
- MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
- MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
- MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
- MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
- MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
- MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
- MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
- MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
- MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
- MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
- MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
- MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
- MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
- MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
- MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
- MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
- MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
- MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
- MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
- MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
- MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
- MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
- MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
- MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
- MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
- MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
- MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
- MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
- MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
- MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
- MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
- MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
- MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
- /* UART1 */
- MX28_PAD_AUART0_CTS__DUART_RX,
- MX28_PAD_AUART0_RTS__DUART_TX,
- MX28_PAD_AUART0_TX__DUART_RTS,
- MX28_PAD_AUART0_RX__DUART_CTS,
-
- /* UART2 */
- MX28_PAD_AUART1_RX__AUART1_RX,
- MX28_PAD_AUART1_TX__AUART1_TX,
- MX28_PAD_AUART1_RTS__AUART1_RTS,
- MX28_PAD_AUART1_CTS__AUART1_CTS,
-
- /* CAN */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* TSC2007 */
- MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA1__SSP0_D1 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA2__SSP0_D2 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA3__SSP0_D3 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_CMD__SSP0_CMD |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
- {
- .name = "GPIO-LED",
- .default_trigger = "heartbeat",
- .gpio = TX28_STK5_GPIO_LED,
- },
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
- .leds = tx28_stk5v3_leds,
- .num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
- .mode = SPI_MODE_0,
- },
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
- {
- I2C_BOARD_INFO("ds1339", 0x68),
- },
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
- .wp_gpio = -EINVAL,
- .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
- mx28_soc_init();
-
- mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
- ARRAY_SIZE(tx28_stk5v3_pads));
-
- mx28_add_duart(); /* UART1 */
- mx28_add_auart(1); /* UART2 */
-
- tx28_add_fec0();
- /* spi via ssp will be added when available */
- spi_register_board_info(tx28_spi_board_info,
- ARRAY_SIZE(tx28_spi_board_info));
- gpio_led_register_device(0, &tx28_stk5v3_led_data);
- mx28_add_mxs_i2c(0);
- i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
- ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
- mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
- mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
- mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
- .init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
- .map_io = mx28_map_io,
- .init_irq = mx28_init_irq,
- .timer = &tx28_timer,
- .init_machine = tx28_stk5v3_init,
- .restart = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index dccb67a..a4294aa 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -13,14 +13,11 @@
#include <linux/mm.h>
#include <linux/init.h>
-#include <linux/pinctrl/machine.h>
#include <asm/mach/map.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
/*
* Define the MX23 memory map.
@@ -48,43 +45,7 @@
iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
}
-void __init mx23_init_irq(void)
-{
- icoll_init_irq();
-}
-
void __init mx28_map_io(void)
{
iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
}
-
-void __init mx28_init_irq(void)
-{
- icoll_init_irq();
-}
-
-void __init mx23_soc_init(void)
-{
- pinctrl_provide_dummies();
-
- mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
- mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
- mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
- mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
- mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-}
-
-void __init mx28_soc_init(void)
-{
- pinctrl_provide_dummies();
-
- mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
- mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-
- mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
- mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
- mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
- mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
- mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-}
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
deleted file mode 100644
index 0f71f82..0000000
--- a/arch/arm/mach-mxs/module-tx28.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
- /* PHY POWER */
- MX28_PAD_PWM4__GPIO_3_29 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
- /* PHY RESET */
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
- /* Mode strap pins 0-2 */
- MX28_PAD_ENET0_RXD0__GPIO_4_3 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- MX28_PAD_ENET0_RXD1__GPIO_4_4 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
- MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
- /* nINT */
- MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
- MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
- MX28_PAD_ENET0_MDC__GPIO_4_0,
- MX28_PAD_ENET0_MDIO__GPIO_4_1,
- MX28_PAD_ENET0_TX_EN__GPIO_4_6,
- MX28_PAD_ENET0_TXD0__GPIO_4_7,
- MX28_PAD_ENET0_TXD1__GPIO_4_8,
- MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
- MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
- MX28_PAD_ENET0_RXD2__ENET1_RXD0,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1,
- MX28_PAD_ENET0_COL__ENET1_TX_EN,
- MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
- int i, ret;
-
- pr_debug("%s: Switching FEC PHY power off\n", __func__);
- ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
- ARRAY_SIZE(tx28_fec_gpio_pads));
- for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
- unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]));
-
- ret = gpio_request(gpio, "FEC");
- if (ret) {
- pr_err("Failed to request GPIO_%d_%d: %d\n",
- PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]), ret);
- goto free_gpios;
- }
- ret = gpio_direction_output(gpio, 0);
- if (ret) {
- pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
- gpio / 32 + 1, gpio % 32, ret);
- goto free_gpios;
- }
- }
-
- /* Power up fec phy */
- pr_debug("%s: Switching FEC PHY power on\n", __func__);
- ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
- if (ret) {
- pr_err("Failed to power on PHY: %d\n", ret);
- goto free_gpios;
- }
- mdelay(26); /* 25ms according to data sheet */
-
- /* nINT */
- gpio_direction_input(MXS_GPIO_NR(4, 5));
- /* Mode strap pins */
- gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
- gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
- gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
- udelay(100); /* minimum assertion time for nRST */
-
- pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
- gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
- ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
- ARRAY_SIZE(tx28_fec0_pads));
- if (ret) {
- pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
- __func__, ret);
- goto free_gpios;
- }
- pr_debug("%s: Registering FEC0 device\n", __func__);
- mx28_add_fec(0, &tx28_fec0_data);
- return 0;
-
-free_gpios:
- while (--i >= 0) {
- unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
- PAD_PIN(tx28_fec_gpio_pads[i]));
-
- gpio_free(gpio);
- }
-
- return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
- int ret;
-
- ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
- ARRAY_SIZE(tx28_fec1_pads));
- if (ret) {
- pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
- __func__, ret);
- return ret;
- }
- pr_debug("%s: Registering FEC1 device\n", __func__);
- mx28_add_fec(1, &tx28_fec1_data);
- return 0;
-}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
deleted file mode 100644
index 8ed4254..0000000
--- a/arch/arm/mach-mxs/module-tx28.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index d2b6acc..3d1e1c2 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -16,7 +16,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 68e8e56..f12a12a 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -19,7 +19,7 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <asm/fiq.h>
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 6f192c4..9518bf5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -35,9 +35,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board-ams-delta.h>
-#include <plat/keypad.h>
-#include <plat/mux.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 6d98552..4b6de70 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -28,10 +28,10 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
#include <plat/fpga.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 04b5fda..4ec579f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -22,7 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 44a4ab1..af283a2 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -31,17 +31,18 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-#include <plat/flash.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 86cb5a0..06d11b1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,6 +31,7 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -38,11 +39,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#include <plat/dma.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index a5ac352..87ab208 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -37,12 +37,12 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
-#include <plat/keypad.h>
#include <plat/mmc.h>
#include <mach/irqs.h>
@@ -475,8 +475,7 @@
break;
}
if (!tries)
- printk(KERN_WARNING "Timeout waiting for end of frame "
- "-- LCD may not be available\n");
+ pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
/* turn off DMA */
reg = omap_readw(OMAP_DMA_LCD_CCR);
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f21c2966..db5f7d2 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -31,11 +31,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ec01f03..7d5c06d 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -21,13 +21,14 @@
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/platform_data/lcd-mipid.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
-#include <plat/keypad.h>
-#include <plat/lcd_mipid.h>
+#include <mach/mux.h>
#include <plat/mmc.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3b2d907..2f1f9b9 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -46,8 +46,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
@@ -304,7 +304,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
static struct at24_platform_data at24c04 = {
.byte_len = SZ_4K / 8,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 49f8d74..1c578d5 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,12 +34,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 01523cd..9715809 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -34,12 +34,12 @@
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index a7abce6..e311032 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -36,12 +36,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
+#include <mach/irda.h>
+#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 277e0bc..198b054 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -22,16 +22,16 @@
#include <linux/input.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
-#include <plat/flash.h>
-#include <plat/keypad.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index b59f788..5932d56 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -17,7 +17,7 @@
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2e1fff2..13bf2cc 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -28,18 +28,18 @@
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/dma.h>
-#include <plat/irda.h>
+#include <mach/irda.h>
#include <plat/tc.h>
-#include <plat/keypad.h>
-#include <plat/board-sx1.h>
+#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 1668af3..ad75e34 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -31,9 +31,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board-voiceblue.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/board-voiceblue.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index a9ee06b..638f407 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -587,8 +587,8 @@
/* Clocks in the DSP domain need api_ck. Just assume bootloader
* has not enabled any DSP clocks */
if (clk->enable_reg == DSP_IDLECT2) {
- printk(KERN_INFO "Skipping reset check for DSP domain "
- "clock \"%s\"\n", clk->name);
+ pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+ clk->name);
return;
}
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 6a32b9b..9b45f4b 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -775,11 +775,10 @@
static void __init omap1_show_rates(void)
{
- pr_notice("Clocking rate (xtal/DPLL1/MPU): "
- "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
- ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
- ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
- arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+ pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+ ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+ ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+ arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
u32 cpu_mask;
@@ -840,8 +839,8 @@
if (cpu_is_omap16xx() && crystal_type == 2)
ck_ref.rate = 19200000;
- pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
- "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+ pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+ omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 05fdbd9..0cc54dd 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -20,7 +20,7 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index b0b0f0f..29007fe 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -331,8 +331,9 @@
d->chan = kzalloc(sizeof(struct omap_dma_lch) *
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&pdev->dev, "%s: Memory allocation failed"
- "for d->chan!!!\n", __func__);
+ dev_err(&pdev->dev,
+ "%s: Memory allocation failed for d->chan!\n",
+ __func__);
goto exit_release_d;
}
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 401eb3c..73ae616 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -11,7 +11,7 @@
#include <linux/mtd/map.h>
#include <plat/tc.h>
-#include <plat/flash.h>
+#include <mach/flash.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5446c99..a0551a6 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -20,7 +20,7 @@
*/
#include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
void __init omap1_i2c_mux_pins(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/board-ams-delta.h
rename to arch/arm/mach-omap1/include/mach/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/board-sx1.h
rename to arch/arm/mach-omap1/include/mach/board-sx1.h
diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/board-voiceblue.h
rename to arch/arm/mach-omap1/include/mach/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/mach-omap1/include/mach/flash.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/flash.h
rename to arch/arm/mach-omap1/include/mach/flash.h
diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/mach-omap1/include/mach/irda.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/irda.h
rename to arch/arm/mach-omap1/include/mach/irda.h
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/mux.h
rename to arch/arm/mach-omap1/include/mach/mux.h
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
deleted file mode 100644
index 80a371c..0000000
--- a/arch/arm/mach-omap1/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6c95a59..6a5baab 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -16,7 +16,7 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 5769c71..ed42628 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -113,8 +113,7 @@
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap15xx()) {
- printk(KERN_ERR "DMA virtual resolution is not supported "
- "in 1510 mode\n");
+ pr_err("DMA virtual resolution is not supported in 1510 mode\n");
BUG();
}
lcd_dma.vxres = vxres;
@@ -437,8 +436,7 @@
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
"LCD DMA", NULL);
if (r != 0)
- printk(KERN_ERR "unable to request IRQ for LCD DMA "
- "(error %d)\n", r);
+ pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
return r;
}
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 7f4bba9..6f958ae 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -69,11 +69,13 @@
gpio_set_value(GPIO_IDLE, 0);
}
- __raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
+ if (fpga) {
+ __raw_writew(~0, &fpga->leds);
+ if (evt == led_halted) {
+ iounmap(fpga);
+ fpga = NULL;
+ }
}
goto done;
@@ -159,7 +161,7 @@
/*
* Actually burn the LEDs
*/
- if (led_state & LED_STATE_ENABLED)
+ if (led_state & LED_STATE_ENABLED && fpga)
__raw_writew(~hw_led_state, &fpga->leds);
done:
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 7b1a383..4071479 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -11,7 +11,7 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index adf0097..bdc2e75 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -20,9 +20,9 @@
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/cpu.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e9cc52d..667ce50 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,7 +29,7 @@
#include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#ifdef CONFIG_OMAP_MUX
@@ -451,6 +451,56 @@
#endif
}
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+ if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+ || !arch_mux_cfg->cfg_reg) {
+ printk(KERN_ERR "Invalid pin table\n");
+ return -EINVAL;
+ }
+
+ mux_cfg = arch_mux_cfg;
+
+ return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+ struct pin_config *reg;
+
+ if (!cpu_class_is_omap1()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (mux_cfg == NULL) {
+ printk(KERN_ERR "Pin mux table not initialized\n");
+ return -ENODEV;
+ }
+
+ if (index >= mux_cfg->size) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, mux_cfg->size);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ reg = &mux_cfg->pins[index];
+
+ if (!mux_cfg->cfg_reg)
+ return -ENODEV;
+
+ return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
int __init omap1_mux_init(void)
{
if (cpu_is_omap7xx()) {
@@ -468,4 +518,8 @@
return omap_mux_register(&arch_mux_cfg);
}
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif /* CONFIG_OMAP_MUX */
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b2560d3..47ec161 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,7 +53,7 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0d1709b..b9d6834 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,7 +22,7 @@
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 65f8817..84267ed 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -26,7 +26,7 @@
#include <asm/irq.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fcd4e85..eef99b7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,6 +18,7 @@
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select HIGHMEM
+ select PINCTRL
help
Compile a kernel suitable for booting most boards
@@ -232,10 +233,11 @@
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b360328..84520235 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,36 +4,30 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
-omap-2-3-common = irq.o
-hwmod-common = omap_hwmod.o \
- omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+# INTCPS IP block support - XXX should be moved to drivers/
+obj-$(CONFIG_ARCH_OMAP2) += irq.o
+obj-$(CONFIG_ARCH_OMAP3) += irq.o
+obj-$(CONFIG_SOC_AM33XX) += irq.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
+# Secure monitor API support
+obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-omap-4-5-common = omap4-common.o omap-wakeupgen.o \
- sleep44xx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
-obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
+obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
+obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -58,6 +52,7 @@
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
@@ -68,15 +63,15 @@
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -88,92 +83,76 @@
endif
ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
-omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
- prcm_mpu44xx.o prminst44xx.o \
- vc44xx_data.o vp44xx_data.o
-obj-y += prm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y += prcm.o prm_common.o
+obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
+obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
+omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
+ prcm_mpu44xx.o prminst44xx.o \
+ vc44xx_data.o vp44xx_data.o \
+ prm44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
-voltagedomain-common := voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+obj-y += voltage.o vc.o vp.o
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
-obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
# OMAP powerdomain framework
-powerdomain-common += powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
+obj-y += powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
# PRCM clockdomain control
-clockdomain-common += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
+obj-y += clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
+obj-y += clock.o clock_common_data.o \
+ clkt_dpll.o clkt_clksel.o
+obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
+obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
@@ -181,6 +160,7 @@
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
+obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
@@ -230,10 +210,10 @@
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
@@ -256,7 +236,7 @@
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index b03e562..be0fe92 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -1,3 +1,9 @@
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
+
+dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
+dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 2c90ac6..d0c54c5 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -19,7 +19,7 @@
#include <linux/davinci_emac.h>
#include <asm/system.h>
#include <plat/omap_device.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/am35xx.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/am35xx.h
rename to arch/arm/mach-omap2/am35xx.h
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 0900eac..95b384d 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,7 +36,7 @@
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 5453173..96cd369 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -24,12 +24,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
@@ -37,7 +37,7 @@
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include "board-flash.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 8518b13..fc224ad 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -17,7 +17,7 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index db43e22..e82098f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -36,7 +36,7 @@
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 403d048..0d99c91 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -27,7 +27,7 @@
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 34cb904..8ffd612 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -39,13 +39,13 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <mach/hardware.h>
@@ -64,7 +64,7 @@
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
.id = 0,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 27a5450..59c0a45 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -40,10 +40,10 @@
#include "common.h"
#include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "mux.h"
#include "control.h"
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 18b63ad..7bb8056 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -32,7 +32,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-#include <mach/id.h>
+#include "id.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -40,13 +40,13 @@
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/dm9000.h>
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 9017813..0cabe61 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -19,8 +19,8 @@
#include <plat/cpu.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <plat/tc.h>
#include "common.h"
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 12569cb..f6c48dd 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -34,7 +34,7 @@
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/debug-devices.h>
+#include "debug-devices.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 8408bb2..fb8bd83 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -35,7 +35,7 @@
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include "mux.h"
#include "hsmmc.h"
@@ -192,7 +192,7 @@
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = IGEP2_SMSC911X_CS,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3f3a552..ee8c3cf 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,17 +28,17 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
#include <plat/usb.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index d8deaea..d95f727 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,6 +20,8 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
@@ -27,8 +29,6 @@
#include "common.h"
#include <plat/menelaus.h>
-#include <plat/mcspi.h>
-#include <plat/onenand.h>
#include <plat/mmc.h>
#include "mux.h"
@@ -550,8 +550,8 @@
ret = menelaus_set_regulator_sleep(1, val);
if (ret < 0) {
- printk(KERN_ERR "Could not set regulators to sleep on "
- "menelaus: %u\n", ret);
+ pr_err("Could not set regulators to sleep on menelaus: %u\n",
+ ret);
return ret;
}
return 0;
@@ -563,8 +563,7 @@
ret = menelaus_set_vcore_hw(1400, 1050);
if (ret < 0) {
- printk(KERN_ERR "Could not set VCORE voltage on "
- "menelaus: %u\n", ret);
+ pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
return ret;
}
return 0;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 801bcb4..68ff8d5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b94873d..3fe5f0f 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -45,9 +45,9 @@
#include <asm/mach/map.h>
#include <plat/usb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
@@ -118,7 +118,7 @@
}
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = OMAP3EVM_SMSC911X_CS,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index b5e56fa..7bd8253 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -34,7 +34,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#include <plat/gpmc.h>
#include <plat/sdrc.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index e700a98..00a1f4a 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,16 +35,16 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/regulator/fixed.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/mcspi.h>
#include <plat/usb.h>
#include <video/omapdss.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b8756f0..c7f3d02 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -41,13 +41,13 @@
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
@@ -60,7 +60,7 @@
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#define OMAP3STALKER_ETHR_START 0x2c000000
#define OMAP3STALKER_ETHR_SIZE 1024
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 0e2f838..944ffc4 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -29,7 +29,7 @@
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -45,7 +45,7 @@
#include "common.h"
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7a62d13..2e7f240 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,6 +37,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -47,8 +50,6 @@
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/mcspi.h>
#include <plat/usb.h>
#include "mux.h"
@@ -113,7 +114,7 @@
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct omap_smsc911x_platform_data smsc911x_cfg = {
.id = 0,
@@ -516,8 +517,7 @@
udelay(10);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
} else {
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_W2W_NRESET\n");
+ pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
}
ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
@@ -536,8 +536,7 @@
if (ret == 0)
gpio_export(OVERO_GPIO_USBH_CPEN, 0);
else
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_USBH_CPEN\n");
+ pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
}
MACHINE_START(OVERO, "Gumstix Overo")
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 00773a3..45997bf 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -17,6 +17,7 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -26,7 +27,6 @@
#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
-#include <plat/onenand.h>
#include <plat/serial.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 4560490..3945c50 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,16 +25,17 @@
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
#include <asm/system_info.h>
-#include <plat/mcspi.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 2c1289b..c22e111 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -17,9 +17,9 @@
#include <asm/mach-types.h>
#include <video/omapdss.h>
#include <plat/vram.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/board-rx51.h>
+#include "board-rx51.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 93b4661..7bbb05d 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,12 +17,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/mcspi.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/include/mach/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/board-rx51.h
rename to arch/arm/mach-omap2/board-rx51.h
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 5ec069e..afb2278 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -18,7 +18,7 @@
#include <linux/regulator/machine.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
#include <mach/board-zoom.h>
@@ -84,8 +84,7 @@
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem"
- "for Quad UART(TL16CP754C)\n");
+ pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
return;
}
@@ -107,8 +106,8 @@
if (gpio_request_one(debug_board_detect, GPIOF_IN,
"Zoom debug board detect") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
- "board detect\n", debug_board_detect);
+ pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
+ debug_board_detect);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index ea79bc2..b940ab2 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -14,7 +14,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/spi/spi.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index d6e34dd..298887b 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -92,15 +92,13 @@
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
- pr_debug("clock: SDRC CS0 timing params used:"
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: "
- " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+ pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+ sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+ sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
if (sdrc_cs1)
omap3_configure_core_dpll(
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 04d551b..19a9809 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -71,8 +71,8 @@
if (!clks->parent) {
/* This indicates a data problem */
- WARN(1, "clock: Could not find parent clock %s in clksel array "
- "of clock %s\n", src_clk->name, clk->name);
+ WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
+ clk->name, src_clk->name);
return NULL;
}
@@ -126,8 +126,8 @@
if (max_div == 0) {
/* This indicates an error in the clksel data */
- WARN(1, "clock: Could not find divisor for clock %s parent %s"
- "\n", clk->name, src_clk->parent->name);
+ WARN(1, "clock: %s: could not find divisor for parent %s\n",
+ clk->name, src_clk->parent->name);
return 0;
}
@@ -191,8 +191,8 @@
if (!clkr->div) {
/* This indicates a data error */
- WARN(1, "clock: Could not find fieldval %d for clock %s parent "
- "%s\n", field_val, clk->name, clk->parent->name);
+ WARN(1, "clock: %s: could not find fieldval %d parent %s\n",
+ clk->name, field_val, clk->parent->name);
return 0;
}
@@ -230,8 +230,8 @@
}
if (!clkr->div) {
- pr_err("clock: Could not find divisor %d for clock %s parent "
- "%s\n", div, clk->name, clk->parent->name);
+ pr_err("clock: %s: could not find divisor %d parent %s\n",
+ clk->name, div, clk->parent->name);
return ~0;
}
@@ -300,8 +300,8 @@
/* Sanity check */
if (clkr->div <= last_div)
- pr_err("clock: clksel_rate table not sorted "
- "for clock %s", clk->name);
+ pr_err("clock: %s: clksel_rate table not sorted",
+ clk->name);
last_div = clkr->div;
@@ -312,9 +312,8 @@
}
if (!clkr->div) {
- pr_err("clock: Could not find divisor for target "
- "rate %ld for clock %s parent %s\n", target_rate,
- clk->name, clk->parent->name);
+ pr_err("clock: %s: could not find divisor for target rate %ld parent %s\n",
+ clk->name, target_rate, clk->parent->name);
return ~0;
}
@@ -359,8 +358,7 @@
if (clkr->val == r) {
if (clk->parent != clks->parent) {
- pr_debug("clock: inited %s parent "
- "to %s (was %s)\n",
+ pr_debug("clock: %s: inited parent to %s (was %s)\n",
clk->name, clks->parent->name,
((clk->parent) ?
clk->parent->name : "NULL"));
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 0bf0ec3..83b658b 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -105,13 +105,13 @@
}
if (fint < fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, "
- "lowering max_divider\n", n);
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
} else if (fint > fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, "
- "boosting min_divider\n", n);
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1a1f97f..e97f98f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -104,8 +104,8 @@
clk->name, clk->clkdm_name);
clk->clkdm = clkdm;
} else {
- pr_debug("clock: could not associate clk %s to "
- "clkdm %s\n", clk->name, clk->clkdm_name);
+ pr_debug("clock: could not associate clk %s to clkdm %s\n",
+ clk->name, clk->clkdm_name);
}
}
@@ -228,8 +228,7 @@
* 'Independent' here refers to a clock which is not
* controlled by its parent.
*/
- printk(KERN_ERR "clock: clk_disable called on independent "
- "clock %s which has no enable_reg\n", clk->name);
+ pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
return;
}
@@ -272,8 +271,7 @@
void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount == 0) {
- WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
- "already 0?", clk->name);
+ WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
return;
}
@@ -334,8 +332,8 @@
if (clkdm_control && clk->clkdm) {
ret = clkdm_clk_enable(clk->clkdm, clk);
if (ret) {
- WARN(1, "clock: %s: could not enable clockdomain %s: "
- "%d\n", clk->name, clk->clkdm->name, ret);
+ WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
+ clk->name, clk->clkdm->name, ret);
goto oce_err2;
}
}
@@ -503,10 +501,8 @@
hfclkin_rate = clk_get_rate(hfclkin_ck);
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (hfclkin_rate / 1000000),
- ((hfclkin_rate / 100000) % 10),
+ pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+ (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 02fe1f2..7ea9139 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1856,6 +1856,7 @@
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X),
+ CLK("twl", "fck", &osc_ck, CK_243X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index be177c1..2026311 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1038,13 +1038,13 @@
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
- CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX),
- CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX),
- CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX),
- CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX),
- CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX),
- CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX),
- CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX),
+ CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
+ CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
+ CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
+ CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
+ CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
+ CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
+ CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index fc2765b..15cdc647 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -49,8 +49,7 @@
* on DPLL4.
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
- pr_err("clock: DPLL4 cannot change rate due to "
- "silicon 'Limitation 2.5' on 3430ES1.\n");
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 10a2398..700317a 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3226,6 +3226,7 @@
CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
+ CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8664f5a..a155562 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -174,9 +174,8 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- pr_debug("clockdomain: adding %s sleepdep/wkdep for "
- "clkdm %s\n", autodep->clkdm.ptr->name,
- clkdm->name);
+ pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
+ clkdm->name, autodep->clkdm.ptr->name);
clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
@@ -205,9 +204,8 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- pr_debug("clockdomain: removing %s sleepdep/wkdep for "
- "clkdm %s\n", autodep->clkdm.ptr->name,
- clkdm->name);
+ pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
+ clkdm->name, autodep->clkdm.ptr->name);
clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
@@ -469,14 +467,14 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
- pr_debug("clockdomain: hardware will wake up %s when %s wakes "
- "up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
}
@@ -510,14 +508,14 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
- pr_debug("clockdomain: hardware will no longer wake up %s "
- "after %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
}
@@ -555,8 +553,8 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear wake up of "
- "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
@@ -613,15 +611,14 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
- pr_debug("clockdomain: will prevent %s from sleeping if %s "
- "is active\n", clkdm1->name, clkdm2->name);
+ pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
}
@@ -657,16 +654,14 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
- pr_debug("clockdomain: will no longer prevent %s from "
- "sleeping if %s is active\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
+ clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
}
@@ -706,9 +701,8 @@
ret = -EINVAL;
if (ret) {
- pr_debug("clockdomain: hardware cannot set/clear sleep "
- "dependency affecting %s from %s\n", clkdm1->name,
- clkdm2->name);
+ pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
+ clkdm1->name, clkdm2->name);
return ret;
}
@@ -755,8 +749,8 @@
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- pr_debug("clockdomain: %s does not support forcing "
- "sleep via software\n", clkdm->name);
+ pr_debug("clockdomain: %s does not support forcing sleep via software\n",
+ clkdm->name);
return -EINVAL;
}
@@ -790,8 +784,8 @@
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- pr_debug("clockdomain: %s does not support forcing "
- "wakeup via software\n", clkdm->name);
+ pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
+ clkdm->name);
return -EINVAL;
}
@@ -826,8 +820,8 @@
return;
if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
- pr_debug("clock: automatic idle transitions cannot be enabled "
- "on clockdomain %s\n", clkdm->name);
+ pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
+ clkdm->name);
return;
}
@@ -861,8 +855,8 @@
return;
if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
- pr_debug("clockdomain: automatic idle transitions cannot be "
- "disabled on %s\n", clkdm->name);
+ pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
+ clkdm->name);
return;
}
@@ -927,7 +921,7 @@
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
- pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+ pr_debug("clockdomain: %s: enabled\n", clkdm->name);
return 0;
}
@@ -952,7 +946,7 @@
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
- pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+ pr_debug("clockdomain: %s: disabled\n", clkdm->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index a0d68db..f99e65c 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -241,6 +241,52 @@
_clkdm_del_autodeps(clkdm);
}
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_add_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ _disable_hwsup(clkdm);
+ _clkdm_del_autodeps(clkdm);
+ _enable_hwsup(clkdm);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
struct clkdm_ops omap2_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
@@ -267,6 +313,6 @@
.clkdm_wakeup = omap3_clkdm_wakeup,
.clkdm_allow_idle = omap3_clkdm_allow_idle,
.clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 766338f..975f6bd 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -67,6 +67,7 @@
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_MASK (1 << 0)
/* CM_IDLEST_PLL_IVA2 */
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 013fedc..48daac2 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -24,8 +24,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <plat/mcspi.h>
-#include <plat/nand.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include "common-board-devices.h"
@@ -120,8 +120,7 @@
}
if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
+ pr_info("NAND: Unable to find configuration in GPMC\n");
return;
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 8e43c4d8..17950c6 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/mux.h>
#include <plat/clock.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c1a5cab..123186a 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,10 +16,10 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
+#include "ctrl_module_core_44xx.h"
+#include "ctrl_module_wkup_44xx.h"
+#include "ctrl_module_pad_core_44xx.h"
+#include "ctrl_module_pad_wkup_44xx.h"
#include "am33xx.h"
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
rename to arch/arm/mach-omap2/ctrl_module_core_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
rename to arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
rename to arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_wkup_44xx.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
rename to arch/arm/mach-omap2/ctrl_module_wkup_44xx.h
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/debug-devices.h
rename to arch/arm/mach-omap2/debug-devices.h
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 6f6893e..d092d2a8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
#include <asm/mach-types.h>
@@ -26,7 +27,7 @@
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include <plat/omap4-keypad.h>
+#include "omap4-keypad.h"
#include "soc.h"
#include "common.h"
@@ -383,7 +384,7 @@
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
@@ -627,6 +628,10 @@
static int __init omap2_init_devices(void)
{
+ /* Enable dummy states for those platforms without pinctrl support */
+ if (!of_have_populated_dt())
+ pinctrl_provide_dummies();
+
/*
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index f48043db..27d79de 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -623,8 +623,11 @@
while (pclk && !pclk->dpll_data)
pclk = pclk->parent;
- /* clk does not have a DPLL as a parent? */
- WARN_ON(!pclk);
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return 0;
+ }
dd = pclk->dpll_data;
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index a636ebc..9838810 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -30,7 +30,7 @@
#include <plat/omap-pm.h>
#endif
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
static struct platform_device *omap_dsp_pdev;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7b52bdf..e7b246d 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -61,6 +61,7 @@
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
+ kfree(pdata);
return -ENOMEM;
}
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 9e9f47a..4acf497 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -13,10 +13,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach/flash.h>
-#include <plat/nand.h>
#include <plat/gpmc.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index b66fb8e..916716e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/mach/flash.h>
-#include <plat/onenand.h>
#include <plat/gpmc.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 245839d..5654753 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -18,7 +18,7 @@
#include <linux/smc91x.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smc91x.h>
+#include "gpmc-smc91x.h"
#include "soc.h"
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
rename to arch/arm/mach-omap2/gpmc-smc91x.h
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index a3a2887..249a0b4 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -21,7 +21,7 @@
#include <linux/smsc911x.h>
#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
+#include "gpmc-smsc911x.h"
static struct resource gpmc_smsc911x_resources[] = {
[0] = {
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
rename to arch/arm/mach-omap2/gpmc-smsc911x.h
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 055ae8b..72428bd 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -297,7 +297,7 @@
div = gpmc_cs_calc_divider(cs, t->sync_clk);
if (div < 0)
- return -1;
+ return div;
GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index cdd6dda..e003f2b 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -29,7 +29,7 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include <plat/hdq1w.h>
+#include "hdq1w.h"
#include "common.h"
diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/hdq1w.h
rename to arch/arm/mach-omap2/hdq1w.h
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 80399d7..03ebf47 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -19,7 +19,6 @@
#include <plat/mmc.h>
#include <plat/omap-pm.h>
-#include <plat/mux.h>
#include <plat/omap_device.h>
#include "mux.h"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 7219df0..cf2362c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -23,7 +23,7 @@
#include "common.h"
-#include <mach/id.h>
+#include "id.h"
#include "soc.h"
#include "control.h"
@@ -161,9 +161,8 @@
}
if (j == ARRAY_SIZE(omap_ids)) {
- printk(KERN_ERR "Unknown OMAP device type. "
- "Handling it as OMAP%04x\n",
- omap_ids[i].type >> 16);
+ pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
+ omap_ids[i].type >> 16);
j = i;
}
diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/id.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/id.h
rename to arch/arm/mach-omap2/id.h
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
deleted file mode 100644
index 323675f..0000000
--- a/arch/arm/mach-omap2/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index efed4f5..3926f37 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -108,9 +108,8 @@
unsigned long tmp;
tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
- printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
- "(revision %ld.%ld) with %d interrupts\n",
- bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
+ pr_info("IRQ: Found an INTC at 0x%p (revision %ld.%ld) with %d interrupts\n",
+ bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/mach-omap2/l3_2xxx.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/l3_2xxx.h
rename to arch/arm/mach-omap2/l3_2xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/mach-omap2/l3_3xxx.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/l3_3xxx.h
rename to arch/arm/mach-omap2/l3_3xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/mach-omap2/l4_2xxx.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/l4_2xxx.h
rename to arch/arm/mach-omap2/l4_2xxx.h
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/mach-omap2/l4_3xxx.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/l4_3xxx.h
rename to arch/arm/mach-omap2/l4_3xxx.h
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index d493727..7d47407 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,9 +17,9 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/dma.h>
-#include <plat/mcbsp.h>
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 414083b..765a2ac 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index d9ae4a5..a004cb9 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -19,7 +19,7 @@
#include <asm/memblock.h>
#include <plat/omap-secure.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/omap-secure.h
rename to arch/arm/mach-omap2/omap-secure.h
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 19cc5f5..06d8bc3 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,8 +24,8 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
-#include <mach/omap-secure.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-secure.h"
+#include "omap-wakeupgen.h"
#include <asm/cputype.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index b54427d..b3275ba 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -27,8 +27,8 @@
#include <asm/hardware/gic.h>
-#include <mach/omap-wakeupgen.h>
-#include <mach/omap-secure.h>
+#include "omap-wakeupgen.h"
+#include "omap-secure.h"
#include "soc.h"
#include "omap4-sar-layout.h"
@@ -47,7 +47,7 @@
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = MAX_NR_REG_BANKS;
static unsigned int max_irqs = MAX_IRQS;
static unsigned int omap_secure_apis;
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
rename to arch/arm/mach-omap2/omap-wakeupgen.h
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 73c1440..e1f2897 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -29,7 +29,7 @@
#include <plat/omap-secure.h>
#include <plat/mmc.h>
-#include <mach/omap-wakeupgen.h>
+#include "omap-wakeupgen.h"
#include "soc.h"
#include "common.h"
@@ -170,7 +170,10 @@
/* Enable PL310 L2 Cache controller */
omap_smc1(0x102, 0x1);
- l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
+ if (of_have_populated_dt())
+ l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+ else
+ l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
/*
* Override default outer_cache.disable with a OMAP4
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap4-keypad.h
rename to arch/arm/mach-omap2/omap4-keypad.h
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 22b1c18..00c0066 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1485,8 +1485,8 @@
* Return the bit position of the reset line that match the
* input name. Return -ENOENT if not found.
*/
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
- struct omap_hwmod_rst_info *ohri)
+static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
+ struct omap_hwmod_rst_info *ohri)
{
int i;
@@ -1522,7 +1522,7 @@
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
@@ -1531,7 +1531,7 @@
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
ret = soc_ops.assert_hardreset(oh, &ohri);
@@ -1589,7 +1589,7 @@
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
- u8 ret = -EINVAL;
+ int ret = -EINVAL;
if (!oh)
return -EINVAL;
@@ -1598,7 +1598,7 @@
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
return soc_ops.is_hardreset_asserted(oh, &ohri);
@@ -1718,8 +1718,8 @@
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
- pr_warning("omap_hwmod: %s: reset can only be entered from "
- "enabled state\n", oh->name);
+ pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
+ oh->name);
return -EINVAL;
}
@@ -1966,6 +1966,7 @@
_enable_sysc(oh);
}
} else {
+ _omap4_disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
@@ -3328,6 +3329,33 @@
}
/**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh. Intended to be called by code that registers
+ * omap_devices. See also omap_hwmod_count_resources(). Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+ int i, sdma_reqs_cnt;
+ int r = 0;
+
+ sdma_reqs_cnt = _count_sdma_reqs(oh);
+ for (i = 0; i < sdma_reqs_cnt; i++) {
+ (res + r)->name = (oh->sdma_reqs + i)->name;
+ (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->end = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->flags = IORESOURCE_DMA;
+ r++;
+ }
+
+ return r;
+}
+
+/**
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
* @oh: struct omap_hwmod * to operate on
* @type: one of the IORESOURCE_* constants from include/linux/ioport.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 4e81637..10575a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,14 +12,15 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <plat/omap_hwmod.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/mcspi.h>
#include <plat/dmtimer.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index ceb23c3..60de70f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,15 +12,16 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+
#include <plat/omap_hwmod.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
#include <plat/dmtimer.h>
#include <plat/mmc.h>
-#include <plat/l3_2xxx.h>
+#include "l3_2xxx.h"
#include "soc.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index bea700e..8851bbb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -13,7 +13,7 @@
#include <plat/serial.h>
#include <plat/dma.h>
#include <plat/common.h>
-#include <plat/hdq1w.h>
+#include "hdq1w.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 5178e40..f853a0b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -15,8 +15,8 @@
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
+#include "l3_2xxx.h"
+#include "l4_2xxx.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index ceb3052..feeb401 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -13,7 +13,7 @@
#include <linux/platform_data/gpio-omap.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 75fbbac..94b38af 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -20,15 +20,15 @@
#include <plat/omap_hwmod.h>
#include <plat/dma.h>
#include <plat/serial.h>
-#include <plat/l3_3xxx.h>
-#include <plat/l4_3xxx.h>
+#include "l3_3xxx.h"
+#include "l4_3xxx.h"
#include <plat/i2c.h>
#include <plat/mmc.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat/dmtimer.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "soc.h"
#include "omap_hwmod_common_data.h"
@@ -100,9 +100,9 @@
/* IVA2 (IVA2) */
static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
- { .name = "logic", .rst_shift = 0 },
- { .name = "seq0", .rst_shift = 1 },
- { .name = "seq1", .rst_shift = 2 },
+ { .name = "logic", .rst_shift = 0, .st_shift = 8 },
+ { .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+ { .name = "seq1", .rst_shift = 2, .st_shift = 10 },
};
static struct omap_hwmod omap3xxx_iva_hwmod = {
@@ -112,6 +112,15 @@
.rst_lines = omap3xxx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
.main_clk = "iva2_ck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430_IVA2_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+ }
+ },
};
/* timer class */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index b95244b..f9bcb24 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -25,8 +25,8 @@
#include <plat/omap_hwmod.h>
#include <plat/i2c.h>
#include <plat/dma.h>
-#include <plat/mcspi.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/mmc.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
@@ -4209,7 +4209,7 @@
};
/* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
.master = &omap44xx_dsp_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
@@ -4827,7 +4827,7 @@
};
/* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
.master = &omap44xx_iva_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "dpll_iva_m5x2_ck",
@@ -5361,7 +5361,7 @@
};
/* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_sl2if_hwmod,
.clk = "l3_div_ck",
@@ -6031,7 +6031,7 @@
&omap44xx_l4_abe__dmic,
&omap44xx_l4_abe__dmic_dma,
&omap44xx_dsp__iva,
- &omap44xx_dsp__sl2if,
+ /* &omap44xx_dsp__sl2if, */
&omap44xx_l4_cfg__dsp,
&omap44xx_l3_main_2__dss,
&omap44xx_l4_per__dss,
@@ -6067,7 +6067,7 @@
&omap44xx_l4_per__i2c4,
&omap44xx_l3_main_2__ipu,
&omap44xx_l3_main_2__iss,
- &omap44xx_iva__sl2if,
+ /* &omap44xx_iva__sl2if, */
&omap44xx_l3_main_2__iva,
&omap44xx_l4_wkup__kbd,
&omap44xx_l4_cfg__mailbox,
@@ -6098,7 +6098,7 @@
&omap44xx_l4_cfg__cm_core,
&omap44xx_l4_wkup__prm,
&omap44xx_l4_wkup__scrm,
- &omap44xx_l3_main_2__sl2if,
+ /* &omap44xx_l3_main_2__sl2if, */
&omap44xx_l4_abe__slimbus1,
&omap44xx_l4_abe__slimbus1_dma,
&omap44xx_l4_per__slimbus2,
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index d8f6dbf..45ad7f7 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,25 +64,22 @@
}
oh = omap_hwmod_lookup(opp_def->hwmod_name);
if (!oh || !oh->od) {
- pr_debug("%s: no hwmod or odev for %s, [%d] "
- "cannot add OPPs.\n", __func__,
- opp_def->hwmod_name, i);
+ pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n",
+ __func__, opp_def->hwmod_name, i);
continue;
}
dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
- dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
- "result=%d\n",
- __func__, opp_def->freq,
- opp_def->hwmod_name, i, r);
+ dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
+ __func__, opp_def->freq,
+ opp_def->hwmod_name, i, r);
} else {
if (!opp_def->default_available)
r = opp_disable(dev, opp_def->freq);
if (r)
- dev_err(dev, "%s: disable %ld failed for %s "
- "[%d] result=%d\n",
+ dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
__func__, opp_def->freq,
opp_def->hwmod_name, i, r);
}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 9cb5ced..939bd6f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -203,8 +203,8 @@
bootup_volt = opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
- pr_err("%s: unable to find voltage corresponding "
- "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+ pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
+ __func__, vdd_name);
goto exit;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 90480f7..ba670db 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -391,9 +391,8 @@
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
- pr_info("Powerdomain (%s) didn't enter "
- "target state %d\n",
- pwrst->pwrdm->name, pwrst->next_state);
+ pr_info("Powerdomain (%s) didn't enter target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -733,8 +732,7 @@
omap3_secure_ram_storage =
kmalloc(0x803F, GFP_KERNEL);
if (!omap3_secure_ram_storage)
- pr_err("Memory allocation failed when "
- "allocating for secure sram context\n");
+ pr_err("Memory allocation failed when allocating for secure sram context\n");
local_irq_disable();
local_fiq_disable();
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index ea24174..04922d1 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -69,9 +69,8 @@
list_for_each_entry(pwrst, &pwrst_list, node) {
state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
if (state > pwrst->next_state) {
- pr_info("Powerdomain (%s) didn't enter "
- "target state %d\n",
- pwrst->pwrdm->name, pwrst->next_state);
+ pr_info("Powerdomain (%s) didn't enter target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
ret = -1;
}
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
@@ -189,8 +188,7 @@
ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
- pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
- "wakeup dependency\n");
+ pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
goto err2;
}
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ca5be83..1678a32 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -341,8 +341,8 @@
if (!pwrdm || !clkdm)
return -EINVAL;
- pr_debug("powerdomain: associating clockdomain %s with powerdomain "
- "%s\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: associating clockdomain %s\n",
+ pwrdm->name, clkdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
if (!pwrdm->pwrdm_clkdms[i])
@@ -356,8 +356,8 @@
}
if (i == PWRDM_MAX_CLKDMS) {
- pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
- "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
+ pr_debug("powerdomain: %s: increase PWRDM_MAX_CLKDMS for clkdm %s\n",
+ pwrdm->name, clkdm->name);
WARN_ON(1);
ret = -ENOMEM;
goto pac_exit;
@@ -389,16 +389,16 @@
if (!pwrdm || !clkdm)
return -EINVAL;
- pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
- "%s\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: dissociating clockdomain %s\n",
+ pwrdm->name, clkdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
if (pwrdm->pwrdm_clkdms[i] == clkdm)
break;
if (i == PWRDM_MAX_CLKDMS) {
- pr_debug("powerdomain: clkdm %s not associated with pwrdm "
- "%s ?!\n", clkdm->name, pwrdm->name);
+ pr_debug("powerdomain: %s: clkdm %s not associated?!\n",
+ pwrdm->name, clkdm->name);
ret = -ENOENT;
goto pdc_exit;
}
@@ -487,7 +487,7 @@
if (!(pwrdm->pwrsts & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
+ pr_debug("powerdomain: %s: setting next powerstate to %0x\n",
pwrdm->name, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
@@ -589,7 +589,7 @@
if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
+ pr_debug("powerdomain: %s: setting next logic powerstate to %0x\n",
pwrdm->name, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
@@ -626,8 +626,8 @@
if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next memory powerstate for domain %s "
- "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
+ pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-ON to %0x\n",
+ pwrdm->name, bank, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
@@ -664,8 +664,8 @@
if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
return -EINVAL;
- pr_debug("powerdomain: setting next memory powerstate for domain %s "
- "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
+ pr_debug("powerdomain: %s: setting next memory powerstate for bank %0x while pwrdm-RET to %0x\n",
+ pwrdm->name, bank, pwrst);
if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
@@ -843,7 +843,7 @@
* warn & fail if it is not ON.
*/
- pr_debug("powerdomain: clearing previous power state reg for %s\n",
+ pr_debug("powerdomain: %s: clearing previous power state reg\n",
pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
@@ -873,8 +873,7 @@
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return ret;
- pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
- pwrdm->name);
+ pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n", pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
@@ -903,8 +902,7 @@
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return ret;
- pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
- pwrdm->name);
+ pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n", pwrdm->name);
if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index 0f0a9f1..3950ccf 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -122,8 +122,8 @@
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
- printk(KERN_ERR "powerdomain: waited too long for "
- "powerdomain %s to complete transition\n", pwrdm->name);
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
return -EAGAIN;
}
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index 601325b..aeac6f3 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -198,8 +198,8 @@
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
- printk(KERN_ERR "powerdomain: waited too long for "
- "powerdomain %s to complete transition\n", pwrdm->name);
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
return -EAGAIN;
}
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 9c9d23c..0f51e03 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -139,11 +139,11 @@
MAX_MODULE_ENABLE_WAIT, i);
if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("cm: Module associated with clock %s ready after %d "
- "loops\n", name, i);
+ pr_debug("cm: Module associated with clock %s ready after %d loops\n",
+ name, i);
else
- pr_err("cm: Module associated with clock %s didn't enable in "
- "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+ pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
};
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 7ca266e..0405c81 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -232,9 +232,8 @@
if (console_loglevel >= 10) {
uart_debug = true;
- pr_info("%s used as console in debug mode"
- " uart%d clocks will not be"
- " gated", uart_name, uart->num);
+ pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
+ uart_name, uart->num);
}
if (cmdline_find_option("no_console_suspend"))
@@ -319,8 +318,11 @@
pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
NULL, 0, false);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
- name, oh->name);
+ if (IS_ERR(pdev)) {
+ WARN(1, "Could not build omap_device for %s: %s.\n", name,
+ oh->name);
+ return;
+ }
if ((console_uart_id == bdata->id) && no_console_suspend)
omap_device_disable_idle_on_suspend(pdev);
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index b7d8ead..88ff83a 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -14,7 +14,7 @@
#include <asm/memory.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/omap-secure.h>
+#include "omap-secure.h"
#include "common.h"
#include "omap44xx.h"
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index d033a65..cbeae56 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -104,16 +104,15 @@
sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
if (!sr_data) {
- pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
- __func__, oh->name);
+ pr_err("%s: Unable to allocate memory for %s sr_data\n",
+ __func__, oh->name);
return -ENOMEM;
}
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
- pr_err("%s: No voltage domain specified for %s."
- "Cannot initialize\n", __func__,
- oh->name);
+ pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+ __func__, oh->name);
goto exit;
}
@@ -131,8 +130,8 @@
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
- pr_warning("%s: No Voltage table registered fo VDD%d."
- "Something really wrong\n\n", __func__, i + 1);
+ pr_err("%s: No Voltage table registered for VDD%d\n",
+ __func__, i + 1);
goto exit;
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 25cbe73..810aa1a 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -36,6 +36,7 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
@@ -213,7 +214,7 @@
res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = (void *)&clkev;
+ omap2_gp_timer_irq.dev_id = &clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
@@ -262,6 +263,7 @@
return 0;
}
+#ifdef CONFIG_OMAP_32K_TIMER
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
{
@@ -301,6 +303,12 @@
return ret;
}
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+ return -ENODEV;
+}
+#endif
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
const char *fck_source)
@@ -387,6 +395,11 @@
if (omap_rev() != OMAP4430_REV_ES1_0) {
int err;
+ if (of_have_populated_dt()) {
+ twd_local_timer_of_register();
+ return;
+ }
+
err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 89150b2..136c64b 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,7 +28,7 @@
#include <plat/usb.h>
#include <plat/omap_device.h>
-#include <mach/am35xx.h>
+#include "am35xx.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index b451f3c..880249b 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -115,9 +115,8 @@
}
if (!voltdm->pmic->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, voltdm->name);
+ pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n",
+ __func__, voltdm->name);
return -ENODATA;
}
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 4dc60e8..3ac8fe1 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -195,8 +195,8 @@
return &voltdm->volt_data[i];
}
- pr_notice("%s: Unable to match the current voltage with the voltage"
- "table for vdd_%s\n", __func__, voltdm->name);
+ pr_notice("%s: Unable to match the current voltage with the voltage table for vdd_%s\n",
+ __func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
@@ -249,8 +249,8 @@
voltdm->scale = omap_vc_bypass_scale;
return;
default:
- pr_warning("%s: Trying to change the method of voltage scaling"
- "to an unsupported one!\n", __func__);
+ pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n",
+ __func__);
}
}
@@ -331,8 +331,8 @@
if (!voltdm || !pwrdm)
return -EINVAL;
- pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
- "%s\n", pwrdm->name, voltdm->name);
+ pr_debug("voltagedomain: %s: associating powerdomain %s\n",
+ voltdm->name, pwrdm->name);
list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 0ac2caf..7283b7e 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,7 +16,7 @@
#include <linux/err.h>
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
#include "vc.h"
#include "vp.h"
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index f95c1ba..85241b8 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -138,8 +138,8 @@
udelay(1);
}
if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, voltdm->name);
+ pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted",
+ __func__, voltdm->name);
return -ETIMEDOUT;
}
@@ -157,9 +157,8 @@
omap_test_timeout(vp->common->ops->check_txdone(vp->id),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, voltdm->name);
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
@@ -176,8 +175,7 @@
}
if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
+ pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",
__func__, voltdm->name);
/* Clear force bit */
@@ -257,8 +255,8 @@
/* If VP is already disabled, do nothing. Return */
if (!vp->enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
+ pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",
+ __func__, voltdm->name);
return;
}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 410291c..87a6cda 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -47,16 +47,6 @@
.length = ORION5X_REGS_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = ORION5X_PCIE_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
- .length = ORION5X_PCIE_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ORION5X_PCI_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
- .length = ORION5X_PCI_IO_SIZE,
- .type = MT_DEVICE,
- }, {
.virtual = ORION5X_PCIE_WA_VIRT_BASE,
.pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
.length = ORION5X_PCIE_WA_SIZE,
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
deleted file mode 100644
index 1aa5d0a..0000000
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <mach/orion5x.h>
-#include <asm/sizes.h>
-
-#define IO_SPACE_LIMIT SZ_2M
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 683e085..1b60131 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -31,31 +31,29 @@
* fc000000 device bus mappings (cs0/cs1)
*
* virt phys size
- * fdd00000 f1000000 1M on-chip peripheral registers
- * fde00000 f2000000 1M PCIe I/O space
- * fdf00000 f2100000 1M PCI I/O space
- * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
+ * fe000000 f1000000 1M on-chip peripheral registers
+ * fee00000 f2000000 64K PCIe I/O space
+ * fee10000 f2100000 64K PCI I/O space
+ * fd000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only)
****************************************************************************/
#define ORION5X_REGS_PHYS_BASE 0xf1000000
-#define ORION5X_REGS_VIRT_BASE 0xfdd00000
+#define ORION5X_REGS_VIRT_BASE 0xfe000000
#define ORION5X_REGS_SIZE SZ_1M
#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000
#define ORION5X_PCIE_IO_BUS_BASE 0x00000000
-#define ORION5X_PCIE_IO_SIZE SZ_1M
+#define ORION5X_PCIE_IO_SIZE SZ_64K
#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE 0x00100000
-#define ORION5X_PCI_IO_SIZE SZ_1M
+#define ORION5X_PCI_IO_BUS_BASE 0x00010000
+#define ORION5X_PCI_IO_SIZE SZ_64K
#define ORION5X_SRAM_PHYS_BASE (0xf2200000)
#define ORION5X_SRAM_SIZE SZ_8K
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
+#define ORION5X_PCIE_WA_VIRT_BASE 0xfd000000
#define ORION5X_PCIE_WA_SIZE SZ_16M
#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index cb19e16..6921d49 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -162,35 +162,25 @@
pcie_ops.read = pcie_rd_conf_wa;
}
+ pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+
/*
* Request resources.
*/
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("pcie_setup unable to alloc resources");
/*
- * IORESOURCE_IO
- */
- sys->io_offset = 0;
- res[0].name = "PCIe I/O Space";
- res[0].flags = IORESOURCE_IO;
- res[0].start = ORION5X_PCIE_IO_BUS_BASE;
- res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
- if (request_resource(&ioport_resource, &res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
- /*
* IORESOURCE_MEM
*/
- res[1].name = "PCIe Memory Space";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
- res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
- if (request_resource(&iomem_resource, &res[1]))
+ res->name = "PCIe Memory Space";
+ res->flags = IORESOURCE_MEM;
+ res->start = ORION5X_PCIE_MEM_PHYS_BASE;
+ res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, res))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
@@ -489,35 +479,25 @@
*/
orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+ pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+
/*
* Request resources
*/
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("pci_setup unable to alloc resources");
/*
- * IORESOURCE_IO
- */
- sys->io_offset = 0;
- res[0].name = "PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
- res[0].start = ORION5X_PCI_IO_BUS_BASE;
- res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
- if (request_resource(&ioport_resource, &res[0]))
- panic("Request PCI IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
- /*
* IORESOURCE_MEM
*/
- res[1].name = "PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
- res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
- if (request_resource(&iomem_resource, &res[1]))
+ res->name = "PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
+ res->start = ORION5X_PCI_MEM_PHYS_BASE;
+ res->end = res->start + ORION5X_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, res))
panic("Request PCI Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
return 1;
}
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
deleted file mode 100644
index 777564c..0000000
--- a/arch/arm/mach-pnx4008/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m :=
-obj-n :=
-obj- :=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
deleted file mode 100644
index 9fa19ba..0000000
--- a/arch/arm/mach-pnx4008/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
- zreladdr-y += 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
-
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
deleted file mode 100644
index a4a3819..0000000
--- a/arch/arm/mach-pnx4008/clock.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Generic clock management functions are partially based on:
- * linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
- local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
- local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
- struct clk *tmp_clk;
-
- tmp_clk = clk;
- while (tmp_clk->propagate_next) {
- tmp_clk = tmp_clk->propagate_next;
- local_set_rate(tmp_clk, tmp_clk->user_rate);
- }
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
- if (clk->enable_reg)
- __raw_writel(__raw_readl(clk->enable_reg) &
- ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
- if (clk->enable_reg)
- __raw_writel(__raw_readl(clk->enable_reg) |
- (1 << clk->enable_shift), clk->enable_reg);
- return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
- if (clk->enable_reg1)
- __raw_writel(__raw_readl(clk->enable_reg1) &
- ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
- if (clk->enable_reg1)
- __raw_writel(__raw_readl(clk->enable_reg1) |
- (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
- int i;
- i = 0;
- while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */
-
- if (!(__raw_readl(clk->scale_reg) & 1)) {
- printk(KERN_ERR
- "%s ERROR: failed to lock, scale reg data: %x\n",
- clk->name, __raw_readl(clk->scale_reg));
- return -1;
- }
- return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
- int i;
- int ret;
- u32 tmp_reg;
-
- ret = 0;
-
- if (!clk->rate)
- clk_reg_enable1(clk);
-
- tmp_reg = __raw_readl(clk->parent_switch_reg);
- /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
- if (!(tmp_reg & 1)) {
- tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */
- __raw_writel(tmp_reg, clk->parent_switch_reg);
- i = 0;
- while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */
-
- if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
- printk(KERN_ERR
- "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
- clk->name, __raw_readl(clk->parent_switch_reg));
- ret = -1;
- }
- }
-
- if (!clk->rate)
- clk_reg_disable1(clk);
-
- return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
- int i;
- int ret;
- u32 tmp_reg;
-
- ret = 0;
-
- if (!clk->rate)
- clk_reg_enable1(clk);
-
- tmp_reg = __raw_readl(clk->parent_switch_reg);
- /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
- if (tmp_reg & 1) {
- tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */
- __raw_writel(tmp_reg, clk->parent_switch_reg);
- i = 0;
- while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */
-
- if (__raw_readl(clk->parent_switch_reg) & 1) {
- printk(KERN_ERR
- "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
- clk->name, __raw_readl(clk->parent_switch_reg));
- ret = -1;
- }
- }
-
- if (!clk->rate)
- clk_reg_disable1(clk);
-
- return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
-
- if (parent == &ck_13MHz)
- ret = switch_to_clean_13mhz(clk);
- else if (parent == &ck_pll1)
- ret = switch_to_dirty_13mhz(clk);
-
- return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp_reg, tmp_m, tmp_2p, i;
- u32 parent_rate;
- int ret = -EINVAL;
-
- parent_rate = clk->parent->rate;
-
- if (!parent_rate)
- goto out;
-
- /* set direct run for ARM or disable output for others */
- clk_reg_disable(clk);
-
- /* disable source input as well (ignored for ARM) */
- clk_reg_disable1(clk);
-
- tmp_reg = __raw_readl(clk->scale_reg);
- tmp_reg &= ~0x1ffff; /*clear all settings, power down */
- __raw_writel(tmp_reg, clk->scale_reg);
-
- rate -= rate % parent_rate; /*round down the input */
-
- if (rate > PLL160_MAX_FCCO)
- rate = PLL160_MAX_FCCO;
-
- if (!rate) {
- clk->rate = 0;
- ret = 0;
- goto out;
- }
-
- clk_reg_enable1(clk);
- tmp_reg = __raw_readl(clk->scale_reg);
-
- if (rate == parent_rate) {
- /*enter direct bypass mode */
- tmp_reg |= ((1 << 14) | (1 << 15));
- __raw_writel(tmp_reg, clk->scale_reg);
- clk->rate = parent_rate;
- clk_reg_enable(clk);
- ret = 0;
- goto out;
- }
-
- i = 0;
- for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
- if (rate * tmp_2p >= PLL160_MIN_FCCO)
- break;
- i++;
- }
-
- if (tmp_2p > 1)
- tmp_reg |= ((i - 1) << 11);
- else
- tmp_reg |= (1 << 14); /*direct mode, no divide */
-
- tmp_m = rate * tmp_2p;
- tmp_m /= parent_rate;
-
- tmp_reg |= (tmp_m - 1) << 1; /*calculate M */
- tmp_reg |= (1 << 16); /*power up PLL */
- __raw_writel(tmp_reg, clk->scale_reg);
-
- if (clk_wait_for_pll_lock(clk) < 0) {
- clk_reg_disable(clk);
- clk_reg_disable1(clk);
-
- tmp_reg = __raw_readl(clk->scale_reg);
- tmp_reg &= ~0x1ffff; /*clear all settings, power down */
- __raw_writel(tmp_reg, clk->scale_reg);
- clk->rate = 0;
- ret = -EFAULT;
- goto out;
- }
-
- clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
-
- clk_reg_enable(clk);
- ret = 0;
-
-out:
- return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp;
-
- tmp = __raw_readl(clk->scale_reg);
- tmp &= ~(0x1f << 2);
- tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
- __raw_writel(tmp, clk->scale_reg);
- clk->rate = rate;
- return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
- u32 tmp;
- tmp = __raw_readl(clk->scale_reg);
- tmp = tmp & ~0x3;
- switch (rate) {
- case 1:
- break;
- case 2:
- tmp |= 1;
- break;
- case 4:
- tmp |= 2;
- break;
- }
-
- __raw_writel(tmp, clk->scale_reg);
- clk->rate = rate;
- return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
- switch (rate) {
- case 1:
- case 4:
- return rate;
- }
- return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
- return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_enable(clk);
- clk->rate = 1;
- } else {
- clk_reg_disable(clk);
- clk->rate = 0;
- }
- return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- clk->rate = 1;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
- return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
- if (rate > CLK_RATE_208MHZ)
- rate = CLK_RATE_208MHZ;
- if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
- rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
- return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
- if (rate > CLK_RATE_208MHZ)
- rate = CLK_RATE_208MHZ;
- return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
- return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- udelay(500);
- clk->rate = CLK_RATE_13MHZ;
- ck_1MHz.rate = CLK_RATE_1MHZ;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- ck_1MHz.rate = 0;
- }
- return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
- if (rate) {
- clk_reg_disable(clk); /*enable bit is inverted */
- if (!clk_wait_for_pll_lock(clk)) {
- clk->rate = CLK_RATE_13MHZ;
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
-
- } else {
- clk_reg_enable(clk);
- clk->rate = 0;
- }
-#endif
- return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
- .name = "osc_13MHz",
- .flags = FIXED_RATE,
- .rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
- .name = "ck_13MHz",
- .parent = &osc_13MHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &ck_13MHz_round_rate,
- .set_rate = &ck_13MHz_set_rate,
- .enable_reg = OSC13CTRL_REG,
- .enable_shift = 0,
- .rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
- .name = "osc_32KHz",
- .flags = FIXED_RATE,
- .rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
- .name = "ck_1MHz",
- .flags = FIXED_RATE | PARENT_SET_RATE,
- .parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
- .name = "ck_pll1",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &ck_13MHz_round_rate,
- .set_rate = &pll1_set_rate,
- .enable_reg = PLLCTRL_REG,
- .enable_shift = 1,
- .scale_reg = PLLCTRL_REG,
- .rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
- .name = "ck_pll4",
- .parent = &ck_pll1,
- .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
- .propagate_next = &per_ck,
- .round_rate = &pll4_round_rate,
- .set_rate = &pll160_set_rate,
- .rate = CLK_RATE_208MHZ,
- .scale_reg = HCLKPLLCTRL_REG,
- .enable_reg = PWRCTRL_REG,
- .enable_shift = 2,
- .parent_switch_reg = SYSCLKCTRL_REG,
- .set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
- .name = "ck_pll5",
- .parent = &ck_1MHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &pll5_round_rate,
- .set_rate = &pll160_set_rate,
- .scale_reg = USBCTRL_REG,
- .enable_reg = USBCTRL_REG,
- .enable_shift = 18,
- .enable_reg1 = USBCTRL_REG,
- .enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
- .name = "ck_pll3",
- .parent = &ck_pll1,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &pll3_round_rate,
- .set_rate = &pll160_set_rate,
- .scale_reg = DSPPLLCTRL_REG,
- .enable_reg = DSPCLKCTRL_REG,
- .enable_shift = 3,
- .enable_reg1 = DSPCLKCTRL_REG,
- .enable_shift1 = 2,
- .parent_switch_reg = DSPCLKCTRL_REG,
- .set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
- .name = "hclk_ck",
- .parent = &ck_pll4,
- .flags = PARENT_SET_RATE,
- .set_rate = &hclk_set_rate,
- .round_rate = &hclk_round_rate,
- .scale_reg = HCLKDIVCTRL_REG,
- .rate = 2,
- .user_rate = 2,
-};
-
-static struct clk per_ck = {
- .name = "per_ck",
- .parent = &ck_pll4,
- .flags = FIXED_RATE,
- .propagate_next = &hclk_ck,
- .set_rate = &per_clk_set_rate,
- .round_rate = &per_clk_round_rate,
- .scale_reg = HCLKDIVCTRL_REG,
- .rate = CLK_RATE_13MHZ,
- .user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
- .name = "m2hclk_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_inv_set_rate,
- .rate = 1,
- .enable_shift = 6,
- .enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
- .name = "vfp9_ck",
- .parent = &ck_pll4,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 4,
- .enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
- .name = "keyscan_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
- .name = "touch_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
- .name = "pwm1_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
- .name = "pwm2_ck",
- .parent = &osc_32KHz,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 2,
- .enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
- .name = "jpeg_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
- .name = "ms_ck",
- .parent = &ck_pll4,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 5,
- .enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
- .name = "dum_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
- .name = "flash_ck",
- .parent = &hclk_ck,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 1, /* Only MLC clock supported */
- .enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
- .name = "i2c0_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 0,
- .enable_reg = I2CCLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
- .name = "i2c1_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 1,
- .enable_reg = I2CCLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
- .name = "i2c2_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION | FIXED_RATE,
- .enable_shift = 2,
- .enable_reg = USB_OTG_CLKCTRL_REG,
- .rate = 13000000,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
- .name = "spi0_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
- .name = "spi1_ck",
- .parent = &hclk_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 4,
- .enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
- .name = "dma_ck",
- .parent = &hclk_ck,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 0,
- .enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
- .name = "uart3_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 0,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
- .name = "uart4_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 1,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
- .name = "uart5_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .rate = 1,
- .enable_shift = 2,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
- .name = "uart6_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .round_rate = &on_off_round_rate,
- .set_rate = &on_off_set_rate,
- .enable_shift = 3,
- .enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
- .name = "wdt_ck",
- .parent = &per_ck,
- .flags = NEEDS_INITIALIZATION,
- .enable_shift = 0,
- .enable_reg = TIMCLKCTRL_REG,
- .enable = clk_reg_enable,
- .disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
- &ck_13MHz,
- &ck_pll1,
- &ck_pll4,
- &ck_pll5,
- &ck_pll3,
- &vfp9_ck,
- &m2hclk_ck,
- &hclk_ck,
- &dma_ck,
- &flash_ck,
- &dum_ck,
- &keyscan_ck,
- &pwm1_ck,
- &pwm2_ck,
- &jpeg_ck,
- &ms_ck,
- &touch_ck,
- &i2c0_ck,
- &i2c1_ck,
- &i2c2_ck,
- &spi0_ck,
- &spi1_ck,
- &uart3_ck,
- &uart4_ck,
- &uart5_ck,
- &uart6_ck,
- &wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
- { .clk = &ck_13MHz, .con_id = "ck_13MHz" },
- { .clk = &ck_pll1, .con_id = "ck_pll1" },
- { .clk = &ck_pll4, .con_id = "ck_pll4" },
- { .clk = &ck_pll5, .con_id = "ck_pll5" },
- { .clk = &ck_pll3, .con_id = "ck_pll3" },
- { .clk = &vfp9_ck, .con_id = "vfp9_ck" },
- { .clk = &m2hclk_ck, .con_id = "m2hclk_ck" },
- { .clk = &hclk_ck, .con_id = "hclk_ck" },
- { .clk = &dma_ck, .con_id = "dma_ck" },
- { .clk = &flash_ck, .con_id = "flash_ck" },
- { .clk = &dum_ck, .con_id = "dum_ck" },
- { .clk = &keyscan_ck, .con_id = "keyscan_ck" },
- { .clk = &pwm1_ck, .con_id = "pwm1_ck" },
- { .clk = &pwm2_ck, .con_id = "pwm2_ck" },
- { .clk = &jpeg_ck, .con_id = "jpeg_ck" },
- { .clk = &ms_ck, .con_id = "ms_ck" },
- { .clk = &touch_ck, .con_id = "touch_ck" },
- { .clk = &i2c0_ck, .dev_id = "pnx-i2c.0" },
- { .clk = &i2c1_ck, .dev_id = "pnx-i2c.1" },
- { .clk = &i2c2_ck, .dev_id = "pnx-i2c.2" },
- { .clk = &spi0_ck, .con_id = "spi0_ck" },
- { .clk = &spi1_ck, .con_id = "spi1_ck" },
- { .clk = &uart3_ck, .con_id = "uart3_ck" },
- { .clk = &uart4_ck, .con_id = "uart4_ck" },
- { .clk = &uart5_ck, .con_id = "uart5_ck" },
- { .clk = &uart6_ck, .con_id = "uart6_ck" },
- { .clk = &wdt_ck, .dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
- if (WARN_ON(clk->usecount == 0))
- return;
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
- clk->set_rate(clk, 0);
- if (clk->parent)
- local_clk_disable(clk->parent);
- }
-}
-
-static int local_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->usecount == 0) {
- if (clk->parent) {
- ret = local_clk_enable(clk->parent);
- if (ret != 0)
- goto out;
- }
-
- if (clk->enable)
- ret = clk->enable(clk);
- else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
- && clk->user_rate)
- ret = clk->set_rate(clk, clk->user_rate);
-
- if (ret != 0 && clk->parent) {
- local_clk_disable(clk->parent);
- goto out;
- }
-
- clk->usecount++;
- }
-out:
- return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
- int ret = -EINVAL;
- if (clk->set_rate) {
-
- if (clk->user_rate == clk->rate && clk->parent->rate) {
- /* if clock enabled or rate not set */
- clk->user_rate = clk->round_rate(clk, rate);
- ret = clk->set_rate(clk, clk->user_rate);
- } else
- clk->user_rate = clk->round_rate(clk, rate);
- ret = 0;
- }
- return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk->flags & FIXED_RATE)
- goto out;
-
- clock_lock();
- if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
- clk->user_rate = clk->round_rate(clk, rate);
- /* parent clock needs to be refreshed
- for the setting to take effect */
- } else {
- ret = local_set_rate(clk, rate);
- }
- ret = 0;
- clock_unlock();
-
-out:
- return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long ret;
- clock_lock();
- ret = clk->rate;
- clock_unlock();
- return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
- int ret;
-
- clock_lock();
- ret = local_clk_enable(clk);
- clock_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- clock_lock();
- local_clk_disable(clk);
- clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- long ret;
- clock_lock();
- if (clk->round_rate)
- ret = clk->round_rate(clk, rate);
- else
- ret = clk->rate;
- clock_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -ENODEV;
- if (!clk->set_parent)
- goto out;
-
- clock_lock();
- ret = clk->set_parent(clk, parent);
- if (!ret)
- clk->parent = parent;
- clock_unlock();
-
-out:
- return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
- struct clk **clkp;
-
- /* Disable autoclocking, as it doesn't seem to work */
- __raw_writel(0xff, AUTOCLK_CTRL);
-
- for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
- clkp++) {
- struct clk *clk = *clkp;
- if (clk->flags & NEEDS_INITIALIZATION) {
- if (clk->set_rate) {
- clk->user_rate = clk->rate;
- local_set_rate(clk, clk->user_rate);
- if (clk->set_parent)
- clk->set_parent(clk, clk->parent);
- }
- if (clk->enable && clk->usecount)
- clk->enable(clk);
- if (clk->disable && !clk->usecount)
- clk->disable(clk);
- }
- pr_debug("%s: clock %s, rate %ld\n",
- __func__, clk->name, clk->rate);
- }
-
- local_clk_enable(&ck_pll4);
-
- /* if ck_13MHz is not used, disable it. */
- if (ck_13MHz.usecount == 0)
- local_clk_disable(&ck_13MHz);
-
- /* Disable autoclocking */
- __raw_writeb(0xff, AUTOCLK_CTRL);
-
- clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
- return 0;
-}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
deleted file mode 100644
index 39720d6..0000000
--- a/arch/arm/mach-pnx4008/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
- const char *name;
- struct clk *parent;
- struct clk *propagate_next;
- u32 rate;
- u32 user_rate;
- s8 usecount;
- u32 flags;
- u32 scale_reg;
- u8 enable_shift;
- u32 enable_reg;
- u8 enable_shift1;
- u32 enable_reg1;
- u32 parent_switch_reg;
- u32(*round_rate) (struct clk *, u32);
- int (*set_rate) (struct clk *, u32);
- int (*set_parent) (struct clk * clk, struct clk * parent);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE (1<<2)
-#define FIXED_RATE (1<<3)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
deleted file mode 100644
index a00d2f1..0000000
--- a/arch/arm/mach-pnx4008/core.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
- {
- .start = PNX4008_SPI1_BASE,
- .end = PNX4008_SPI1_BASE + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = PER_SPI1_REC_XMIT,
- .flags = IORESOURCE_DMA,
- }, {
- .start = SPI1_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .flags = 0,
- },
-};
-
-struct resource spipnx_1_resources[] = {
- {
- .start = PNX4008_SPI2_BASE,
- .end = PNX4008_SPI2_BASE + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = PER_SPI2_REC_XMIT,
- .flags = IORESOURCE_DMA,
- }, {
- .start = SPI2_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .flags = 0,
- }
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- },
-};
-
-static struct platform_device spipnx_1 = {
- .name = "spipnx",
- .id = 1,
- .num_resources = ARRAY_SIZE(spipnx_0_resources),
- .resource = spipnx_0_resources,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-static struct platform_device spipnx_2 = {
- .name = "spipnx",
- .id = 2,
- .num_resources = ARRAY_SIZE(spipnx_1_resources),
- .resource = spipnx_1_resources,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
- {
- .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
- .mapbase = (unsigned long)PNX4008_UART5_BASE,
- .irq = IIR5_INT,
- .uartclk = PNX4008_UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
- },
- {
- .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
- .mapbase = (unsigned long)PNX4008_UART3_BASE,
- .irq = IIR3_INT,
- .uartclk = PNX4008_UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
- },
- {}
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = &platform_serial_ports,
- },
-};
-
-static struct platform_device nand_flash_device = {
- .name = "pnx4008-flash",
- .id = -1,
- .dev = {
- .coherent_dma_mask = 0xFFFFFFFF,
- },
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
- {
- .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
- .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
- .flags = IORESOURCE_MEM,
- }, {
- .start = USB_HOST_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ohci_device = {
- .name = "pnx4008-usb-ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(ohci_resources),
- .resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
- .name = "pnx4008-sdum",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device rgbfb_device = {
- .name = "pnx4008-rgbfb",
- .id = 0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- }
-};
-
-struct resource watchdog_resources[] = {
- {
- .start = PNX4008_WDOG_BASE,
- .end = PNX4008_WDOG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device watchdog_device = {
- .name = "pnx4008-watchdog",
- .id = -1,
- .num_resources = ARRAY_SIZE(watchdog_resources),
- .resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &spipnx_1,
- &spipnx_2,
- &serial_device,
- &ohci_device,
- &nand_flash_device,
- &sdum_device,
- &rgbfb_device,
- &watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
- /*disable all START interrupt sources,
- and clear all START interrupt flags */
- __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
- __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- /* Switch on the UART clocks */
- pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
- {
- .virtual = IO_ADDRESS(PNX4008_IRAM_BASE),
- .pfn = __phys_to_pfn(PNX4008_IRAM_BASE),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
- .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
- .length = SZ_1M - SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
- .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
- .length = SZ_128K * 3,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
- .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE),
- .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-void __init pnx4008_map_io(void)
-{
- iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
- soft_restart(0);
-}
-
-#ifdef CONFIG_PM
-extern int pnx4008_pm_init(void);
-#else
-static inline int pnx4008_pm_init(void) { return 0; }
-#endif
-
-void __init pnx4008_init_late(void)
-{
- pnx4008_pm_init();
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
- /* Maintainer: MontaVista Software Inc. */
- .atag_offset = 0x100,
- .map_io = pnx4008_map_io,
- .init_irq = pnx4008_init_irq,
- .init_machine = pnx4008_init,
- .init_late = pnx4008_init_late,
- .timer = &pnx4008_timer,
- .restart = pnx4008_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
deleted file mode 100644
index a4739e9..0000000
--- a/arch/arm/mach-pnx4008/dma.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/dma.c
- *
- * PNX4008 DMA registration and IRQ dispatching
- *
- * Author: Vitaly Wool
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * Based on the code from Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
- char *name;
- void (*irq_handler) (int, int, void *);
- void *data;
- struct pnx4008_dma_ll *ll;
- u32 ll_dma;
- void *target_addr;
- int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
- void *vaddr;
- void *cur;
- dma_addr_t dma_addr;
- int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
- struct pnx4008_dma_ll *ll = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&ll_lock, flags);
- if (ll_pool.count > 4) { /* can give one more */
- ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
- *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
- *(void **)ll_pool.cur = **(void ***)ll_pool.cur;
- memset(ll, 0, sizeof(*ll));
- ll_pool.count--;
- }
- spin_unlock_irqrestore(&ll_lock, flags);
-
- return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
- unsigned long flags;
-
- if (ll) {
- if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
- printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
- BUG();
- }
-
- if (ll->flags & DMA_BUFFER_ALLOCATED)
- ll->free(ll->alloc_data);
-
- spin_lock_irqsave(&ll_lock, flags);
- *(long *)ll = *(long *)ll_pool.cur;
- *(long *)ll_pool.cur = (long)ll;
- ll_pool.count++;
- spin_unlock_irqrestore(&ll_lock, flags);
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
- struct pnx4008_dma_ll *ptr;
- u32 dma;
-
- while (ll) {
- dma = ll->next_dma;
- ptr = ll->next;
- pnx4008_free_ll_entry(ll, ll_dma);
-
- ll_dma = dma;
- ll = ptr;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
- if (!dma_channels_requested++) {
- struct clk *clk = clk_get(0, "dma_ck");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 1);
- clk_put(clk);
- }
- pnx4008_config_dma(-1, -1, 1);
- }
-}
-static inline void dma_decrement_usage(void)
-{
- if (!--dma_channels_requested) {
- struct clk *clk = clk_get(0, "dma_ck");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, 0);
- clk_put(clk);
- }
- pnx4008_config_dma(-1, -1, 0);
-
- }
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
- spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
- spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
- void (*irq_handler) (int, int, void *), void *data)
-{
- int i, found = 0;
-
- /* basic sanity checks */
- if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
- return -EINVAL;
-
- pnx4008_dma_lock();
-
- /* try grabbing a DMA channel with the requested priority */
- for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
- if (!dma_channels[i].name && (ch == -1 || ch == i)) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- dma_increment_usage();
- dma_channels[i].name = name;
- dma_channels[i].irq_handler = irq_handler;
- dma_channels[i].data = data;
- dma_channels[i].ll = NULL;
- dma_channels[i].ll_dma = 0;
- } else {
- printk(KERN_WARNING "No more available DMA channels for %s\n",
- name);
- i = -ENODEV;
- }
-
- pnx4008_dma_unlock();
- return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
- if (!dma_channels[ch].name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, ch);
- return;
- }
-
- pnx4008_dma_lock();
- pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
- dma_channels[ch].ll = NULL;
- dma_decrement_usage();
-
- dma_channels[ch].name = NULL;
- pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
- unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
- switch (ahb_m1_be) {
- case 0:
- dma_cfg &= ~(1 << 1);
- break;
- case 1:
- dma_cfg |= (1 << 1);
- break;
- default:
- break;
- }
-
- switch (ahb_m2_be) {
- case 0:
- dma_cfg &= ~(1 << 2);
- break;
- case 1:
- dma_cfg |= (1 << 2);
- break;
- default:
- break;
- }
-
- switch (enable) {
- case 0:
- dma_cfg &= ~(1 << 0);
- break;
- case 1:
- dma_cfg |= (1 << 0);
- break;
- default:
- break;
- }
-
- pnx4008_dma_lock();
- __raw_writel(dma_cfg, DMAC_CONFIG);
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
- unsigned long *ctrl)
-{
- int i = 0, dbsize, sbsize, err = 0;
-
- if (!ctrl || !ch_ctrl) {
- err = -EINVAL;
- goto out;
- }
-
- *ctrl = 0;
-
- switch (ch_ctrl->tc_mask) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 31);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
-
- switch (ch_ctrl->cacheable) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 30);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->bufferable) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 29);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->priv_mode) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 28);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->di) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 27);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->si) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 26);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->dest_ahb1) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 25);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->src_ahb1) {
- case 0:
- break;
- case 1:
- *ctrl |= (1 << 24);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->dwidth) {
- case WIDTH_BYTE:
- *ctrl &= ~(7 << 21);
- break;
- case WIDTH_HWORD:
- *ctrl &= ~(7 << 21);
- *ctrl |= (1 << 21);
- break;
- case WIDTH_WORD:
- *ctrl &= ~(7 << 21);
- *ctrl |= (2 << 21);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_ctrl->swidth) {
- case WIDTH_BYTE:
- *ctrl &= ~(7 << 18);
- break;
- case WIDTH_HWORD:
- *ctrl &= ~(7 << 18);
- *ctrl |= (1 << 18);
- break;
- case WIDTH_WORD:
- *ctrl &= ~(7 << 18);
- *ctrl |= (2 << 18);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- dbsize = ch_ctrl->dbsize;
- while (!(dbsize & 1)) {
- i++;
- dbsize >>= 1;
- }
- if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
- err = -EINVAL;
- goto out;
- } else if (i > 1)
- i--;
- *ctrl &= ~(7 << 15);
- *ctrl |= (i << 15);
-
- sbsize = ch_ctrl->sbsize;
- while (!(sbsize & 1)) {
- i++;
- sbsize >>= 1;
- }
- if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
- err = -EINVAL;
- goto out;
- } else if (i > 1)
- i--;
- *ctrl &= ~(7 << 12);
- *ctrl |= (i << 12);
-
- if (ch_ctrl->tr_size > 0x7ff) {
- err = -E2BIG;
- goto out;
- }
- *ctrl &= ~0x7ff;
- *ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
- struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
- int err = 0;
-
- if (!ch_ctrl) {
- err = -EINVAL;
- goto out;
- }
-
- ch_ctrl->tr_size = ctrl & 0x7ff;
- ctrl >>= 12;
-
- ch_ctrl->sbsize = 1 << (ctrl & 7);
- if (ch_ctrl->sbsize > 1)
- ch_ctrl->sbsize <<= 1;
- ctrl >>= 3;
-
- ch_ctrl->dbsize = 1 << (ctrl & 7);
- if (ch_ctrl->dbsize > 1)
- ch_ctrl->dbsize <<= 1;
- ctrl >>= 3;
-
- switch (ctrl & 7) {
- case 0:
- ch_ctrl->swidth = WIDTH_BYTE;
- break;
- case 1:
- ch_ctrl->swidth = WIDTH_HWORD;
- break;
- case 2:
- ch_ctrl->swidth = WIDTH_WORD;
- break;
- default:
- err = -EINVAL;
- goto out;
- }
- ctrl >>= 3;
-
- switch (ctrl & 7) {
- case 0:
- ch_ctrl->dwidth = WIDTH_BYTE;
- break;
- case 1:
- ch_ctrl->dwidth = WIDTH_HWORD;
- break;
- case 2:
- ch_ctrl->dwidth = WIDTH_WORD;
- break;
- default:
- err = -EINVAL;
- goto out;
- }
- ctrl >>= 3;
-
- ch_ctrl->src_ahb1 = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->dest_ahb1 = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->si = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->di = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->priv_mode = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->bufferable = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->cacheable = ctrl & 1;
- ctrl >>= 1;
-
- ch_ctrl->tc_mask = ctrl & 1;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
- unsigned long *cfg)
-{
- int err = 0;
-
- if (!cfg || !ch_cfg) {
- err = -EINVAL;
- goto out;
- }
-
- *cfg = 0;
-
- switch (ch_cfg->halt) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 18);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->active) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 17);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->lock) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 16);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->itc) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 15);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->ie) {
- case 0:
- break;
- case 1:
- *cfg |= (1 << 14);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- switch (ch_cfg->flow_cntrl) {
- case FC_MEM2MEM_DMA:
- *cfg &= ~(7 << 11);
- break;
- case FC_MEM2PER_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (1 << 11);
- break;
- case FC_PER2MEM_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (2 << 11);
- break;
- case FC_PER2PER_DMA:
- *cfg &= ~(7 << 11);
- *cfg |= (3 << 11);
- break;
- case FC_PER2PER_DPER:
- *cfg &= ~(7 << 11);
- *cfg |= (4 << 11);
- break;
- case FC_MEM2PER_PER:
- *cfg &= ~(7 << 11);
- *cfg |= (5 << 11);
- break;
- case FC_PER2MEM_PER:
- *cfg &= ~(7 << 11);
- *cfg |= (6 << 11);
- break;
- case FC_PER2PER_SPER:
- *cfg |= (7 << 11);
- break;
-
- default:
- err = -EINVAL;
- goto out;
- }
- *cfg &= ~(0x1f << 6);
- *cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
- *cfg &= ~(0x1f << 1);
- *cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
- struct pnx4008_dma_ch_config * ch_cfg)
-{
- int err = 0;
-
- if (!ch_cfg) {
- err = -EINVAL;
- goto out;
- }
-
- cfg >>= 1;
-
- ch_cfg->src_per = cfg & 0x1f;
- cfg >>= 5;
-
- ch_cfg->dest_per = cfg & 0x1f;
- cfg >>= 5;
-
- switch (cfg & 7) {
- case 0:
- ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
- break;
- case 1:
- ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
- break;
- case 2:
- ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
- break;
- case 3:
- ch_cfg->flow_cntrl = FC_PER2PER_DMA;
- break;
- case 4:
- ch_cfg->flow_cntrl = FC_PER2PER_DPER;
- break;
- case 5:
- ch_cfg->flow_cntrl = FC_MEM2PER_PER;
- break;
- case 6:
- ch_cfg->flow_cntrl = FC_PER2MEM_PER;
- break;
- case 7:
- ch_cfg->flow_cntrl = FC_PER2PER_SPER;
- }
- cfg >>= 3;
-
- ch_cfg->ie = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->itc = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->lock = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->active = cfg & 1;
- cfg >>= 1;
-
- ch_cfg->halt = cfg & 1;
-
-out:
- return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
- struct pnx4008_dma_ch_ctrl * ctrl)
-{
- int new_len = ctrl->tr_size, num_entries = 0;
- int old_len = new_len;
- int src_width, dest_width, count = 1;
-
- switch (ctrl->swidth) {
- case WIDTH_BYTE:
- src_width = 1;
- break;
- case WIDTH_HWORD:
- src_width = 2;
- break;
- case WIDTH_WORD:
- src_width = 4;
- break;
- default:
- return;
- }
-
- switch (ctrl->dwidth) {
- case WIDTH_BYTE:
- dest_width = 1;
- break;
- case WIDTH_HWORD:
- dest_width = 2;
- break;
- case WIDTH_WORD:
- dest_width = 4;
- break;
- default:
- return;
- }
-
- while (new_len > 0x7FF) {
- num_entries++;
- new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
- }
- if (num_entries != 0) {
- struct pnx4008_dma_ll *ll = NULL;
- config->ch_ctrl &= ~0x7ff;
- config->ch_ctrl |= new_len;
- if (!config->is_ll) {
- config->is_ll = 1;
- while (num_entries) {
- if (!ll) {
- config->ll =
- pnx4008_alloc_ll_entry(&config->
- ll_dma);
- ll = config->ll;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- config->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = config->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- config->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = config->dest_addr;
- ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- } else {
- struct pnx4008_dma_ll *ll_old = config->ll;
- unsigned long ll_dma_old = config->ll_dma;
- while (num_entries) {
- if (!ll) {
- config->ll =
- pnx4008_alloc_ll_entry(&config->
- ll_dma);
- ll = config->ll;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- config->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = config->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- config->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = config->dest_addr;
- ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- ll->next_dma = ll_dma_old;
- ll->next = ll_old;
- }
- /* adjust last length/tc */
- ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
- ll->ch_ctrl |= old_len - new_len * (count - 1);
- config->ch_ctrl &= 0x7fffffff;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
- struct pnx4008_dma_ch_ctrl * ctrl)
-{
- int new_len = ctrl->tr_size, num_entries = 0;
- int old_len = new_len;
- int src_width, dest_width, count = 1;
-
- switch (ctrl->swidth) {
- case WIDTH_BYTE:
- src_width = 1;
- break;
- case WIDTH_HWORD:
- src_width = 2;
- break;
- case WIDTH_WORD:
- src_width = 4;
- break;
- default:
- return;
- }
-
- switch (ctrl->dwidth) {
- case WIDTH_BYTE:
- dest_width = 1;
- break;
- case WIDTH_HWORD:
- dest_width = 2;
- break;
- case WIDTH_WORD:
- dest_width = 4;
- break;
- default:
- return;
- }
-
- while (new_len > 0x7FF) {
- num_entries++;
- new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
- }
- if (num_entries != 0) {
- struct pnx4008_dma_ll *ll = NULL;
- cur_ll->ch_ctrl &= ~0x7ff;
- cur_ll->ch_ctrl |= new_len;
- if (!cur_ll->next) {
- while (num_entries) {
- if (!ll) {
- cur_ll->next =
- pnx4008_alloc_ll_entry(&cur_ll->
- next_dma);
- ll = cur_ll->next;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- cur_ll->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = cur_ll->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- cur_ll->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = cur_ll->dest_addr;
- ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
- } else {
- struct pnx4008_dma_ll *ll_old = cur_ll->next;
- unsigned long ll_dma_old = cur_ll->next_dma;
- while (num_entries) {
- if (!ll) {
- cur_ll->next =
- pnx4008_alloc_ll_entry(&cur_ll->
- next_dma);
- ll = cur_ll->next;
- } else {
- ll->next =
- pnx4008_alloc_ll_entry(&ll->
- next_dma);
- ll = ll->next;
- }
-
- if (ctrl->si)
- ll->src_addr =
- cur_ll->src_addr +
- src_width * new_len * count;
- else
- ll->src_addr = cur_ll->src_addr;
- if (ctrl->di)
- ll->dest_addr =
- cur_ll->dest_addr +
- dest_width * new_len * count;
- else
- ll->dest_addr = cur_ll->dest_addr;
- ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
- ll->next_dma = 0;
- ll->next = NULL;
- num_entries--;
- count++;
- }
-
- ll->next_dma = ll_dma_old;
- ll->next = ll_old;
- }
- /* adjust last length/tc */
- ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
- ll->ch_ctrl |= old_len - new_len * (count - 1);
- cur_ll->ch_ctrl &= 0x7fffffff;
- }
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
- __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
- if (config->is_ll)
- __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
- else
- __raw_writel(0, DMAC_Cx_LLI(ch));
-
- __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
- __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
- return -EINVAL;
-
- pnx4008_dma_lock();
- config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
- config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
- config->is_ll = config->ll_dma ? 1 : 0;
-
- config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
- config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- ch_cfg |= 1;
- __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- ch_cfg &= ~1;
- __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
- unsigned long ch_cfg;
-
- if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
- return -EINVAL;
-
- pnx4008_dma_lock();
- ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
- pnx4008_dma_unlock();
-
- return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i;
- unsigned long dint = __raw_readl(DMAC_INT_STAT);
- unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
- unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
- unsigned long i_bit;
-
- for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
- i_bit = 1 << i;
- if (dint & i_bit) {
- struct dma_channel *channel = &dma_channels[i];
-
- if (channel->name && channel->irq_handler) {
- int cause = 0;
-
- if (eint & i_bit)
- cause |= DMA_ERR_INT;
- if (tcint & i_bit)
- cause |= DMA_TC_INT;
- channel->irq_handler(i, cause, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- if (tcint & i_bit)
- __raw_writel(i_bit, DMAC_INT_TC_CLEAR);
- if (eint & i_bit)
- __raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
- int ret, i;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- goto out;
- }
-
- ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
- ll_pool.cur = ll_pool.vaddr =
- dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
- &ll_pool.dma_addr, GFP_KERNEL);
-
- if (!ll_pool.vaddr) {
- ret = -ENOMEM;
- free_irq(DMA_INT, NULL);
- goto out;
- }
-
- for (i = 0; i < ll_pool.count - 1; i++) {
- void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
- *addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
- }
- *(long *)(ll_pool.vaddr +
- (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
- (long)ll_pool.vaddr;
-
- __raw_writel(1, DMAC_CONFIG);
-
-out:
- return ret;
-}
-arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
deleted file mode 100644
index d3e71d3..0000000
--- a/arch/arm/mach-pnx4008/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE (0x00U)
-#define PIO_OUTP_SET (0x04U)
-#define PIO_OUTP_CLR (0x08U)
-#define PIO_OUTP_STATE (0x0CU)
-#define PIO_DRV_SET (0x10U)
-#define PIO_DRV_CLR (0x14U)
-#define PIO_DRV_STATE (0x18U)
-#define PIO_SDINP_STATE (0x1CU)
-#define PIO_SDOUTP_SET (0x20U)
-#define PIO_SDOUTP_CLR (0x24U)
-#define PIO_MUX_SET (0x28U)
-#define PIO_MUX_CLR (0x2CU)
-#define PIO_MUX_STATE (0x30U)
-
-static inline void gpio_lock(void)
-{
- local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
- local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
- u32 bit, val;
- int ret = -EFAULT;
-
- if (gpio < 0)
- goto out;
-
- bit = GPIO_BIT(gpio);
- if (bit) {
- val = __raw_readl(PIO_VA_BASE + reg);
- ret = (val & bit) ? 1 : 0;
- }
-out:
- return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
- u32 bit, val;
- int ret = -EFAULT;
-
- if (gpio < 0)
- goto out;
-
- bit = GPIO_BIT(gpio);
- if (bit) {
- val = __raw_readl(PIO_VA_BASE + reg);
- val |= bit;
- __raw_writel(val, PIO_VA_BASE + reg);
- ret = 0;
- }
-out:
- return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX 0
-#define OUTP_INDEX 1
-#define GPIO_INDEX 2
-#define MUX_INDEX 3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
- -1, -1, -1, 6, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, 2, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
- unsigned long bit = GPIO_BIT(pin);
- int ret = -EBUSY; /* Already in use */
-
- gpio_lock();
-
- if (GPIO_ISBID(pin)) {
- if (access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] |= bit;
-
- } else if (GPIO_ISRAM(pin)) {
- if (access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] |= bit;
-
- } else if (GPIO_ISMUX(pin)) {
- if (access_map[MUX_INDEX] & bit)
- goto out;
- access_map[MUX_INDEX] |= bit;
-
- } else if (GPIO_ISOUT(pin)) {
- if (access_map[OUTP_INDEX] & bit)
- goto out;
- access_map[OUTP_INDEX] |= bit;
-
- } else if (GPIO_ISIN(pin)) {
- if (access_map[INP_INDEX] & bit)
- goto out;
- access_map[INP_INDEX] |= bit;
- } else
- goto out;
- ret = 0;
-
-out:
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
- unsigned long bit = GPIO_BIT(pin);
- int ret = -EFAULT; /* Not registered */
-
- gpio_lock();
-
- if (GPIO_ISBID(pin)) {
- if (~access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] &= ~bit;
- } else if (GPIO_ISRAM(pin)) {
- if (~access_map[GPIO_INDEX] & bit)
- goto out;
- access_map[GPIO_INDEX] &= ~bit;
- } else if (GPIO_ISMUX(pin)) {
- if (~access_map[MUX_INDEX] & bit)
- goto out;
- access_map[MUX_INDEX] &= ~bit;
- } else if (GPIO_ISOUT(pin)) {
- if (~access_map[OUTP_INDEX] & bit)
- goto out;
- access_map[OUTP_INDEX] &= ~bit;
- } else if (GPIO_ISIN(pin)) {
- if (~access_map[INP_INDEX] & bit)
- goto out;
- access_map[INP_INDEX] &= ~bit;
- } else
- goto out;
- ret = 0;
-
-out:
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
- unsigned long ret = -EFAULT;
- int gpio = GPIO_BIT_MASK(pin);
- gpio_lock();
- if (GPIO_ISOUT(pin)) {
- ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
- } else if (GPIO_ISRAM(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
- ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
- }
- } else if (GPIO_ISBID(pin)) {
- ret = gpio_read_bit(PIO_DRV_STATE, gpio);
- if (ret > 0)
- ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
- else if (ret == 0)
- ret =
- gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
- } else if (GPIO_ISIN(pin)) {
- ret = gpio_read_bit(PIO_INP_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISOUT(pin)) {
- printk( "writing '%x' to '%x'\n",
- gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
- ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
- } else if (GPIO_ISRAM(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
- ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
- PIO_SDOUTP_CLR, gpio);
- } else if (GPIO_ISBID(pin)) {
- if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
- ret = gpio_set_bit(output ? PIO_OUTP_SET :
- PIO_OUTP_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
- ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
- ret = gpio_read_bit(PIO_DRV_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin)) {
- ret =
- gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
- gpio_to_mux_map[gpio]);
- } else if (GPIO_ISOUT(pin)) {
- ret =
- gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
- outp_to_mux_map[gpio]);
- } else if (GPIO_ISMUX(pin)) {
- ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
- int gpio = GPIO_BIT_MASK(pin);
- int ret = -EFAULT;
-
- gpio_lock();
- if (GPIO_ISBID(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
- } else if (GPIO_ISOUT(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
- } else if (GPIO_ISMUX(pin)) {
- ret = gpio_read_bit(PIO_MUX_STATE, gpio);
- }
- gpio_unlock();
- return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
deleted file mode 100644
index 550cfc2..0000000
--- a/arch/arm/mach-pnx4008/i2c.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@gmail.com>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-static struct resource i2c0_resources[] = {
- {
- .start = PNX4008_I2C1_BASE,
- .end = PNX4008_I2C1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = I2C_1_INT,
- .end = I2C_1_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c1_resources[] = {
- {
- .start = PNX4008_I2C2_BASE,
- .end = PNX4008_I2C2_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = I2C_2_INT,
- .end = I2C_2_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource i2c2_resources[] = {
- {
- .start = PNX4008_USB_CONFIG_BASE + 0x300,
- .end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = USB_I2C_INT,
- .end = USB_I2C_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c0_device = {
- .name = "pnx-i2c.0",
- .id = 0,
- .resource = i2c0_resources,
- .num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
- .name = "pnx-i2c.1",
- .id = 1,
- .resource = i2c1_resources,
- .num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
- .name = "pnx-i2c.2",
- .id = 2,
- .resource = i2c2_resources,
- .num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
- &i2c0_device,
- &i2c1_device,
- &i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
deleted file mode 100644
index 8d2a5ef..0000000
--- a/arch/arm/mach-pnx4008/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
deleted file mode 100644
index 469d60d..0000000
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x00090000
- add \rv, \rp, #0xf4000000 @ virtual
- add \rp, \rp, #0x40000000 @ physical
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
deleted file mode 100644
index f094bf8..0000000
--- a/arch/arm/mach-pnx4008/include/mach/dma.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/dma.h
- *
- * PNX4008 DMA header file
- *
- * Author: Vitaly Wool
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS 8
-
-#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT (DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024)
-#define DMAC_CONFIG (DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
- WIDTH_BYTE = 0,
- WIDTH_HWORD,
- WIDTH_WORD
-};
-
-enum {
- FC_MEM2MEM_DMA,
- FC_MEM2PER_DMA,
- FC_PER2MEM_DMA,
- FC_PER2PER_DMA,
- FC_PER2PER_DPER,
- FC_MEM2PER_PER,
- FC_PER2MEM_PER,
- FC_PER2PER_SPER
-};
-
-enum {
- DMA_INT_UNKNOWN = 0,
- DMA_ERR_INT = 1,
- DMA_TC_INT = 2,
-};
-
-enum {
- DMA_BUFFER_ALLOCATED = 1,
- DMA_HAS_LL = 2,
-};
-
-enum {
- PER_CAM_DMA_1 = 0,
- PER_NDF_FLASH = 1,
- PER_MBX_SLAVE_FIFO = 2,
- PER_SPI2_REC_XMIT = 3,
- PER_MS_SD_RX_XMIT = 4,
- PER_HS_UART_1_XMIT = 5,
- PER_HS_UART_1_RX = 6,
- PER_HS_UART_2_XMIT = 7,
- PER_HS_UART_2_RX = 8,
- PER_HS_UART_7_XMIT = 9,
- PER_HS_UART_7_RX = 10,
- PER_SPI1_REC_XMIT = 11,
- PER_MLC_NDF_SREC = 12,
- PER_CAM_DMA_2 = 13,
- PER_PRNG_INFIFO = 14,
- PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
- int tc_mask;
- int cacheable;
- int bufferable;
- int priv_mode;
- int di;
- int si;
- int dest_ahb1;
- int src_ahb1;
- int dwidth;
- int swidth;
- int dbsize;
- int sbsize;
- int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
- int halt;
- int active;
- int lock;
- int itc;
- int ie;
- int flow_cntrl;
- int dest_per;
- int src_per;
-};
-
-struct pnx4008_dma_ll {
- unsigned long src_addr;
- unsigned long dest_addr;
- u32 next_dma;
- unsigned long ch_ctrl;
- struct pnx4008_dma_ll *next;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
- int is_ll;
- unsigned long src_addr;
- unsigned long dest_addr;
- unsigned long ch_ctrl;
- unsigned long ch_cfg;
- struct pnx4008_dma_ll *ll;
- u32 ll_dma;
- int flags;
- void *alloc_data;
- int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
- void (*)(int, int, void *),
- void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
- unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
- struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
- unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
- struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
- struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
- struct pnx4008_dma_ch_ctrl *);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
deleted file mode 100644
index 77a5558..0000000
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE 0xF0000000
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK 0x00
-#define INTRC_RAW_STAT 0x04
-#define INTRC_STAT 0x08
-#define INTRC_POLAR 0x0C
-#define INTRC_ACT_TYPE 0x10
-#define INTRC_TYPE 0x14
-
-#define SIC1_BASE_INT 32
-#define SIC2_BASE_INT 64
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
- ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
- ldr \irqstat, [\base, #INTRC_STAT]
-
- cmp \irqstat,#1<<16
- movhs \irqnr,#16
- movlo \irqnr,#0
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
- teq \irqstat,#0
- beq 1003f
-
-/* and now check for extended IRQ reasons */
- cmp \irqnr,#1
- bls 1003f
- cmp \irqnr,#30
- blo 1002f
-
-/* IRQ 31,30 : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- moveq \irqnr,#SIC1_BASE_INT
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- movne \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- and \irqstat,\irqstat,\tmp
- b 1004f
-
-1003:
-/* IRQ 1,0 : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number */
- ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
- movne \irqnr,#SIC1_BASE_INT
- ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
- moveq \irqnr,#SIC2_BASE_INT
- ldr \irqstat, [\base, #INTRC_STAT]
- ldr \tmp, [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts */
- bic \irqstat,\irqstat,\tmp
-
-1004:
-
- cmp \irqstat,#1<<16
- addhs \irqnr,\irqnr,#16
- movhs \irqstat,\irqstat,lsr#16
- cmp \irqstat,#1<<8
- addhs \irqnr,\irqnr,#8
- movhs \irqstat,\irqstat,lsr#8
- cmp \irqstat,#1<<4
- addhs \irqnr,\irqnr,#4
- movhs \irqstat,\irqstat,lsr#4
- cmp \irqstat,#1<<2
- addhs \irqnr,\irqnr,#2
- movhs \irqstat,\irqstat,lsr#2
- cmp \irqstat,#1<<1
- addhs \irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
- teq \irqstat,#0
-1003:
- .endm
-
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
deleted file mode 100644
index 41027dd..0000000
--- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN (0)
-#define GPIO_OUT (0x100)
-#define GPIO_BID (0x200)
-#define GPIO_RAM (0x300)
-#define GPIO_MUX (0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00 (GPIO_IN | 0)
-#define GPI_01 (GPIO_IN | 1)
-#define GPI_02 (GPIO_IN | 2)
-#define GPI_03 (GPIO_IN | 3)
-#define GPI_04 (GPIO_IN | 4)
-#define GPI_05 (GPIO_IN | 5)
-#define GPI_06 (GPIO_IN | 6)
-#define GPI_07 (GPIO_IN | 7)
-#define GPI_08 (GPIO_IN | 8)
-#define GPI_09 (GPIO_IN | 9)
-#define U1_RX (GPIO_IN | 15)
-#define U2_HTCS (GPIO_IN | 16)
-#define U2_RX (GPIO_IN | 17)
-#define U3_RX (GPIO_IN | 18)
-#define U4_RX (GPIO_IN | 19)
-#define U5_RX (GPIO_IN | 20)
-#define U6_IRRX (GPIO_IN | 21)
-#define U7_HCTS (GPIO_IN | 22)
-#define U7_RX (GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN (GPIO_IN | 25)
-#define DISP_SYNC (GPIO_IN | 26)
-#define SPI2_DATIN (GPIO_IN | 27)
-#define GPI_11 (GPIO_IN | 28)
-
-#define GPIO_IN_MASK 0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00 (GPIO_OUT | 0)
-#define GPO_01 (GPIO_OUT | 1)
-#define GPO_02 (GPIO_OUT | 2)
-#define GPO_03 (GPIO_OUT | 3)
-#define GPO_04 (GPIO_OUT | 4)
-#define GPO_05 (GPIO_OUT | 5)
-#define GPO_06 (GPIO_OUT | 6)
-#define GPO_07 (GPIO_OUT | 7)
-#define GPO_08 (GPIO_OUT | 8)
-#define GPO_09 (GPIO_OUT | 9)
-#define GPO_10 (GPIO_OUT | 10)
-#define GPO_11 (GPIO_OUT | 11)
-#define GPO_12 (GPIO_OUT | 12)
-#define GPO_13 (GPIO_OUT | 13)
-#define GPO_14 (GPIO_OUT | 14)
-#define GPO_15 (GPIO_OUT | 15)
-#define GPO_16 (GPIO_OUT | 16)
-#define GPO_17 (GPIO_OUT | 17)
-#define GPO_18 (GPIO_OUT | 18)
-#define GPO_19 (GPIO_OUT | 19)
-#define GPO_20 (GPIO_OUT | 20)
-#define GPO_21 (GPIO_OUT | 21)
-#define GPO_22 (GPIO_OUT | 22)
-#define GPO_23 (GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK 0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19 (GPIO_RAM | 0)
-#define RAM_D20 (GPIO_RAM | 1)
-#define RAM_D21 (GPIO_RAM | 2)
-#define RAM_D22 (GPIO_RAM | 3)
-#define RAM_D23 (GPIO_RAM | 4)
-#define RAM_D24 (GPIO_RAM | 5)
-#define RAM_D25 (GPIO_RAM | 6)
-#define RAM_D26 (GPIO_RAM | 7)
-#define RAM_D27 (GPIO_RAM | 8)
-#define RAM_D28 (GPIO_RAM | 9)
-#define RAM_D29 (GPIO_RAM | 10)
-#define RAM_D30 (GPIO_RAM | 11)
-#define RAM_D31 (GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK 0x1fff
-
-/* I/O pins */
-#define GPIO_00 (GPIO_BID | 25)
-#define GPIO_01 (GPIO_BID | 26)
-#define GPIO_02 (GPIO_BID | 27)
-#define GPIO_03 (GPIO_BID | 28)
-#define GPIO_04 (GPIO_BID | 29)
-#define GPIO_05 (GPIO_BID | 30)
-
-#define GPIO_BID_MASK 0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL (GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK 0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-#define SE_USB_OTG_ATX_INT_N 19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT 17
-#define SE_KEY_IRQ 16
-#define SE_DSP_SLAVEPORT_INT 15
-#define SE_DSP_GPIO1_INT 14
-#define SE_DSP_GPIO0_INT 13
-#define SE_DSP_AHB_INT 12
-/*11-6 unused*/
-#define SE_GPIO_05_INT 5
-#define SE_GPIO_04_INT 4
-#define SE_GPIO_03_INT 3
-#define SE_GPIO_02_INT 2
-#define SE_GPIO_01_INT 1
-#define SE_GPIO_00_INT 0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
- __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
- ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
- __raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
- START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif /* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
deleted file mode 100644
index 7b98b82..0000000
--- a/arch/arm/mach-pnx4008/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE 0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
deleted file mode 100644
index 2a690ca..0000000
--- a/arch/arm/mach-pnx4008/include/mach/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
deleted file mode 100644
index f6b33cf..0000000
--- a/arch/arm/mach-pnx4008/include/mach/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS 96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT 64
-
-#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
-#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
-#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
-#define GPI_06_INT 92
-#define GPI_05_INT 91
-#define GPI_04_INT 90
-#define GPI_03_INT 89
-#define GPI_02_INT 88
-#define GPI_01_INT 87
-#define GPI_00_INT 86
-#define BT_CLKREQ_INT 85
-#define SPI1_DATIN_INT 84
-#define U5_RX_INT 83
-#define SDIO_INT_N 82
-#define CAM_HS_INT 81
-#define CAM_VS_INT 80
-#define GPI_07_INT 79
-#define DISP_SYNC_INT 78
-#define DSP_INT8 77
-#define U7_HCTS_INT 76
-#define GPI_10_INT 75
-#define GPI_09_INT 74
-#define GPI_08_INT 73
-#define DSP_INT7 72
-#define U2_HCTS_INT 71
-#define SPI2_DATIN_INT 70
-#define GPIO_05_INT 69
-#define GPIO_04_INT 68
-#define GPIO_03_INT 67
-#define GPIO_02_INT 66
-#define GPIO_01_INT 65
-#define GPIO_00_INT 64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT 32
-
-#define USB_I2C_INT 63
-#define USB_DEV_HP_INT 62
-#define USB_DEV_LP_INT 61
-#define USB_DEV_DMA_INT 60
-#define USB_HOST_INT 59
-#define USB_OTG_ATX_INT_N 58
-#define USB_OTG_TIMER_INT 57
-#define SW_INT 56
-#define SPI1_INT 55
-#define KEY_IRQ 54
-#define DSP_M_INT 53
-#define RTC_INT 52
-#define I2C_1_INT 51
-#define I2C_2_INT 50
-#define PLL1_LOCK_INT 49
-#define PLL2_LOCK_INT 48
-#define PLL3_LOCK_INT 47
-#define PLL4_LOCK_INT 46
-#define PLL5_LOCK_INT 45
-#define SPI2_INT 44
-#define DSP_INT1 43
-#define DSP_INT2 42
-#define DSP_TDM_INT2 41
-#define TS_AUX_INT 40
-#define TS_IRQ 39
-#define TS_P_INT 38
-#define UOUT1_TO_PAD_INT 37
-#define GPI_11_INT 36
-#define DSP_INT4 35
-#define JTAG_COMM_RX_INT 34
-#define JTAG_COMM_TX_INT 33
-#define DSP_INT3 32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT 0
-
-#define SUB2_FIQ_N 31 /*active low */
-#define SUB1_FIQ_N 30 /*active low */
-#define JPEG_INT 29
-#define DMA_INT 28
-#define MSTIMER_INT 27
-#define IIR1_INT 26
-#define IIR2_INT 25
-#define IIR7_INT 24
-#define DSP_TDM_INT0 23
-#define DSP_TDM_INT1 22
-#define DSP_P_INT 21
-#define DSP_INT0 20
-#define DUM_INT 19
-#define UOUT0_TO_PAD_INT 18
-#define MP4_ENC_INT 17
-#define MP4_DEC_INT 16
-#define SD0_INT 15
-#define MBX_INT 14
-#define SD1_INT 13
-#define MS_INT_N 12
-#define FLASH_INT 11 /*NAND*/
-#define IIR6_INT 10
-#define IIR5_INT 9
-#define IIR4_INT 8
-#define IIR3_INT 7
-#define WATCH_INT 6
-#define HSTIMER_INT 5
-#define ARCH_TIMER_IRQ HSTIMER_INT
-#define CAM_INT 4
-#define PRNG_INT 3
-#define CRYPTO_INT 2
-#define SUB2_IRQ_N 1 /*active low */
-#define SUB1_IRQ_N 0 /*active low */
-
-#define PNX4008_IRQ_TYPES \
-{ /*IRQ #'s: */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \
-IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT 32
-
-#define SE_U7_RX_INT 63
-#define SE_U7_HCTS_INT 62
-#define SE_BT_CLKREQ_INT 61
-#define SE_U6_IRRX_INT 60
-/*59 unused*/
-#define SE_U5_RX_INT 58
-#define SE_GPI_11_INT 57
-#define SE_U3_RX_INT 56
-#define SE_U2_HCTS_INT 55
-#define SE_U2_RX_INT 54
-#define SE_U1_RX_INT 53
-#define SE_DISP_SYNC_INT 52
-/*51 unused*/
-#define SE_SDIO_INT_N 50
-#define SE_MSDIO_START_INT 49
-#define SE_GPI_06_INT 48
-#define SE_GPI_05_INT 47
-#define SE_GPI_04_INT 46
-#define SE_GPI_03_INT 45
-#define SE_GPI_02_INT 44
-#define SE_GPI_01_INT 43
-#define SE_GPI_00_INT 42
-#define SE_SYSCLKEN_PIN_INT 41
-#define SE_SPI1_DATAIN_INT 40
-#define SE_GPI_07_INT 39
-#define SE_SPI2_DATAIN_INT 38
-#define SE_GPI_10_INT 37
-#define SE_GPI_09_INT 36
-#define SE_GPI_08_INT 35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT 0
-
-#define SE_TS_IRQ 31
-#define SE_TS_P_INT 30
-#define SE_TS_AUX_INT 29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT 25
-#define SE_RTC_INT 24
-#define SE_USB_NEED_CLK_INT 23
-#define SE_USB_INT 22
-#define SE_USB_I2C_INT 21
-#define SE_USB_OTG_TIMER_INT 20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
deleted file mode 100644
index 6ea02f2..0000000
--- a/arch/arm/mach-pnx4008/include/mach/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/param.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
deleted file mode 100644
index 368c2c1..0000000
--- a/arch/arm/mach-pnx4008/include/mach/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE 0x08000000
-#define PNX4008_IRAM_SIZE 0x00010000
-#define PNX4008_YUV_SLAVE_BASE 0x10000000
-#define PNX4008_DUM_SLAVE_BASE 0x18000000
-#define PNX4008_NDF_FLASH_BASE 0x20020000
-#define PNX4008_SPI1_BASE 0x20088000
-#define PNX4008_SPI2_BASE 0x20090000
-#define PNX4008_SD_CONFIG_BASE 0x20098000
-#define PNX4008_FLASH_DATA 0x200B0000
-#define PNX4008_MLC_FLASH_BASE 0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE 0x300A0000
-#define PNX4008_DMA_CONFIG_BASE 0x31000000
-#define PNX4008_USB_CONFIG_BASE 0x31020000
-#define PNX4008_SDRAM_CFG_BASE 0x31080000
-#define PNX4008_AHB2FAB_BASE 0x40000000
-#define PNX4008_PWRMAN_BASE 0x40004000
-#define PNX4008_INTCTRLMIC_BASE 0x40008000
-#define PNX4008_INTCTRLSIC1_BASE 0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE 0x40010000
-#define PNX4008_HSUART1_BASE 0x40014000
-#define PNX4008_HSUART2_BASE 0x40018000
-#define PNX4008_HSUART7_BASE 0x4001C000
-#define PNX4008_RTC_BASE 0x40024000
-#define PNX4008_PIO_BASE 0x40028000
-#define PNX4008_MSTIMER_BASE 0x40034000
-#define PNX4008_HSTIMER_BASE 0x40038000
-#define PNX4008_WDOG_BASE 0x4003C000
-#define PNX4008_DEBUG_BASE 0x40040000
-#define PNX4008_TOUCH1_BASE 0x40048000
-#define PNX4008_KEYSCAN_BASE 0x40050000
-#define PNX4008_UARTCTRL_BASE 0x40054000
-#define PNX4008_PWM_BASE 0x4005C000
-#define PNX4008_UART3_BASE 0x40080000
-#define PNX4008_UART4_BASE 0x40088000
-#define PNX4008_UART5_BASE 0x40090000
-#define PNX4008_UART6_BASE 0x40098000
-#define PNX4008_I2C1_BASE 0x400A0000
-#define PNX4008_I2C2_BASE 0x400A8000
-#define PNX4008_MAGICGATE_BASE 0x400B0000
-#define PNX4008_DUMCONF_BASE 0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE 0x400BC000
-#define PNX4008_DSP_BASE 0x400C0000
-#define PNX4008_PROFCOUNTER_BASE 0x400C8000
-#define PNX4008_CRYPTO_BASE 0x400D0000
-#define PNX4008_CAMIFCONF_BASE 0x400D8000
-#define PNX4008_YUV2RGB_BASE 0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE 0x400E8000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
deleted file mode 100644
index 2fa685b..0000000
--- a/arch/arm/mach-pnx4008/include/mach/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
deleted file mode 100644
index b383c7d..0000000
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
deleted file mode 100644
index bb4751e..0000000
--- a/arch/arm/mach-pnx4008/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
- while (UART5_FR & (1 << 5))
- barrier();
-
- UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
deleted file mode 100644
index 41e4201..0000000
--- a/arch/arm/mach-pnx4008/irq.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq)); /* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
- __raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq)); /* mask interrupt */
- __raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq)); /* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /*rising edge */
- irq_set_handler(d->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_EDGE_FALLING:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq)); /*edge sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*falling edge */
- irq_set_handler(d->irq, handle_edge_irq);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq)); /*low level */
- irq_set_handler(d->irq, handle_level_irq);
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- __raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq)); /*level sensitive */
- __raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq)); /* high level */
- irq_set_handler(d->irq, handle_level_irq);
- break;
-
- /* IRQ_TYPE_EDGE_BOTH is not supported */
- default:
- printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
- return -1;
- }
- return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
- .irq_ack = pnx4008_mask_ack_irq,
- .irq_mask = pnx4008_mask_irq,
- .irq_unmask = pnx4008_unmask_irq,
- .irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
- unsigned int i;
-
- /* configure IRQ's */
- for (i = 0; i < NR_IRQS; i++) {
- set_irq_flags(i, IRQF_VALID);
- irq_set_chip(i, &pnx4008_irq_chip);
- pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
- }
-
- /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
- pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
- pnx4008_irq_type[SUB1_IRQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
- pnx4008_irq_type[SUB2_IRQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
- pnx4008_irq_type[SUB1_FIQ_N]);
- pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
- pnx4008_irq_type[SUB2_FIQ_N]);
-
- /* mask all others */
- __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
- (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
- INTC_ER(MAIN_BASE_INT));
- __raw_writel(0, INTC_ER(SIC1_BASE_INT));
- __raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
deleted file mode 100644
index 26f8d06..0000000
--- a/arch/arm/mach-pnx4008/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
- void (*pnx4008_cpu_standby_ptr) (void);
-
- local_irq_disable();
- local_fiq_disable();
-
- clk_disable(pll4_clk);
-
- /*saving portion of SRAM to be used by suspend function. */
- memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
- /*make sure SRAM copy gets physically written into SDRAM.
- SDRAM will be placed into self-refresh during power down */
- flush_cache_all();
-
- /*copy suspend function into SRAM */
- memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
- /*do suspend */
- pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
- pnx4008_cpu_standby_ptr();
-
- /*restoring portion of SRAM that was used by suspend function */
- memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
- clk_enable(pll4_clk);
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
- void (*pnx4008_cpu_suspend_ptr) (void);
-
- local_irq_disable();
- local_fiq_disable();
-
- clk_disable(pll4_clk);
-
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
- __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
- /*saving portion of SRAM to be used by suspend function. */
- memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
- /*make sure SRAM copy gets physically written into SDRAM.
- SDRAM will be placed into self-refresh during power down */
- flush_cache_all();
-
- /*copy suspend function into SRAM */
- memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
- /*do suspend */
- pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
- pnx4008_cpu_suspend_ptr();
-
- /*restoring portion of SRAM that was used by suspend function */
- memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
- clk_enable(pll4_clk);
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- pnx4008_standby();
- break;
- case PM_SUSPEND_MEM:
- pnx4008_suspend();
- break;
- }
- return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
- return (state == PM_SUSPEND_STANDBY) ||
- (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
- .enter = pnx4008_pm_enter,
- .valid = pnx4008_pm_valid,
-};
-
-int __init pnx4008_pm_init(void)
-{
- u32 sram_size_to_allocate;
-
- pll4_clk = clk_get(0, "ck_pll4");
- if (IS_ERR(pll4_clk)) {
- printk(KERN_ERR
- "PM Suspend cannot acquire ARM(PLL4) clock control\n");
- return PTR_ERR(pll4_clk);
- }
-
- if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
- sram_size_to_allocate = pnx4008_cpu_standby_sz;
- else
- sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
- saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
- if (!saved_sram) {
- printk(KERN_ERR
- "PM Suspend: cannot allocate memory to save portion of SRAM\n");
- clk_put(pll4_clk);
- return -ENOMEM;
- }
-
- suspend_set_ops(&pnx4008_pm_ops);
- return 0;
-}
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
deleted file mode 100644
index 374c138..0000000
--- a/arch/arm/mach-pnx4008/serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/serial.c
- *
- * PNX4008 UART initialization
- *
- * Copyright: MontaVista Software Inc. (c) 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3 0
-#define UART_4 1
-#define UART_5 2
-#define UART_6 3
-#define UART_UNKNOWN (-1)
-
-#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET 8
-#define UART_FIFO_SIZE 64
-
-void pnx4008_uart_init(void)
-{
- u32 tmp;
- int i = UART_FIFO_SIZE;
-
- __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
- __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
- /* Send a NULL to fix the UART HW bug */
- __raw_writel(0x00, UART5_BASE_VA);
- __raw_writel(0x00, UART3_BASE_VA);
-
- while (i--) {
- tmp = __raw_readl(UART5_BASE_VA);
- tmp = __raw_readl(UART3_BASE_VA);
- }
- __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
- __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
- /* setup wakeup interrupt */
- start_int_set_rising_edge(SE_U3_RX_INT);
- start_int_ack(SE_U3_RX_INT);
- start_int_umask(SE_U3_RX_INT);
-
- start_int_set_rising_edge(SE_U5_RX_INT);
- start_int_ack(SE_U5_RX_INT);
- start_int_umask(SE_U5_RX_INT);
-}
-
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
deleted file mode 100644
index f4eed49..0000000
--- a/arch/arm/mach-pnx4008/sleep.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
- .text
-
-ENTRY(pnx4008_cpu_suspend)
- @this function should be entered in Direct run mode.
-
- @ save registers on stack
- stmfd sp!, {r0 - r6, lr}
-
- @ setup Power Manager base address in r4
- @ and put it's value in r5
- mov r4, #(PWRMAN_VA_BASE & 0xff000000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
- ldr r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ setup SDRAM controller base address in r2
- @ and put it's value in r3
- mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
- ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do save current bit settings in r1
- mov r1, r5
-
- @ set SDRAM self-refresh bit
- orr r5, r5, #(1 << 9)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get into self-refresh mode
-2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #(1 << 2)
- beq 2b
-
- @ to prepare SDRAM to get out of self-refresh mode after wakeup
- orr r5, r5, #(1 << 7)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do enter stop mode
- orr r5, r5, #(1 << 0)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- @ sleeping now...
-
- @ coming out of STOP mode into Direct Run mode
- @ clear STOP mode and SDRAM self-refresh bits
- str r1, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get out self-refresh mode
-3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #5
- bne 3b
-
- @ restore regs and return
- ldmfd sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
- .word . - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
- @ save registers on stack
- stmfd sp!, {r0 - r6, lr}
-
- @ setup Power Manager base address in r4
- @ and put it's value in r5
- mov r4, #(PWRMAN_VA_BASE & 0xff000000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
- orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
- ldr r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ setup SDRAM controller base address in r2
- @ and put it's value in r3
- mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
- orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
- ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ do save current bit settings in r1
- mov r1, r5
-
- @ set SDRAM self-refresh bit
- orr r5, r5, #(1 << 9)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit
- and r5, r5, #(~(1 << 9))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get into self-refresh mode
-2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #(1 << 2)
- beq 2b
-
- @ set 'get out of self-refresh mode after wakeup' bit
- orr r5, r5, #(1 << 7)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now...
-
- @ set SDRAM self-refresh bit latch
- orr r5, r5, #(1 << 8)
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ clear SDRAM self-refresh bit latch
- and r5, r5, #(~(1 << 8))
- str r5, [r4, #PWR_CTRL_REG_OFFS]
-
- @ wait for SDRAM to get out self-refresh mode
-3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
- tst r3, #5
- bne 3b
-
- @ restore regs and return
- ldmfd sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
- .word . - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
- stmfd sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
-#else
-1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
- bne 1b
-#endif
- ldmfd sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
deleted file mode 100644
index 0cfe8af..0000000
--- a/arch/arm/mach-pnx4008/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
- u32 ticks_to_match =
- __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
- u32 elapsed = LATCH - ticks_to_match;
- return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
- if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
- do {
- timer_tick();
-
- /*
- * this algorithm takes care of possible delay
- * for this interrupt handling longer than a normal
- * timer period
- */
- __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
- HSTIM_MATCH0);
- __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */
-
- /*
- * The goal is to keep incrementing HSTIM_MATCH0
- * register until HSTIM_MATCH0 indicates time after
- * what HSTIM_COUNTER indicates.
- */
- } while ((signed)
- (__raw_readl(HSTIM_MATCH0) -
- __raw_readl(HSTIM_COUNTER)) < 0);
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
- .name = "PNX4008 Tick Timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
- __raw_writel(RESET_COUNT, MSTIM_CTRL);
- while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
- __raw_writel(0, MSTIM_CTRL); /* stop the timer */
- __raw_writel(0, MSTIM_MCTRL);
-
- __raw_writel(RESET_COUNT, HSTIM_CTRL);
- while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
- __raw_writel(0, HSTIM_CTRL);
- __raw_writel(0, HSTIM_MCTRL);
- __raw_writel(0, HSTIM_CCR);
- __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */
- __raw_writel(LATCH, HSTIM_MATCH0);
- __raw_writel(MR0_INT, HSTIM_MCTRL);
-
- setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
- __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN 1
-#define TIMER_CLK_EN 2 /* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
- timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
- __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
- __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
- .init = pnx4008_setup_timer,
- .offset = pnx4008_gettimeoffset,
- .suspend = pnx4008_timer_suspend,
- .resume = pnx4008_timer_resume,
-};
-
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
deleted file mode 100644
index 75e88c57..0000000
--- a/arch/arm/mach-pnx4008/time.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x) (x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT 1
-#define RESET_COUNT0 (1<<1)
-#define STOP_COUNT0 (1<<2)
-#define MR1_INT (1<<3)
-#define RESET_COUNT1 (1<<4)
-#define STOP_COUNT1 (1<<5)
-#define MR2_INT (1<<6)
-#define RESET_COUNT2 (1<<7)
-#define STOP_COUNT2 (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB 1
-#define RESET_COUNT (1<<1)
-#define DEBUG_EN (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT 1
-#define MATCH1_INT (1<<1)
-#define MATCH2_INT (1<<2)
-#define RTC_TICK0 (1<<4)
-#define RTC_TICK1 (1<<5)
-
-#endif
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
new file mode 100644
index 0000000..41fc853
--- /dev/null
+++ b/arch/arm/mach-prima2/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_SIRF
+
+menu "CSR SiRF primaII/Marco/Polo Specific Features"
+
+config ARCH_PRIMA2
+ bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
+ default y
+ select CPU_V7
+ select ZONE_DMA
+ select SIRF_IRQ
+ help
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
+
+endmenu
+
+config SIRF_IRQ
+ bool
+
+endif
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 13dd160..fc9ce22 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -1,9 +1,8 @@
obj-y := timer.o
-obj-y += irq.o
-obj-y += clock.o
obj-y += rstc.o
-obj-y += prima2.o
+obj-y += common.o
obj-y += rtciobrg.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
obj-$(CONFIG_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_SIRF_IRQ) += irq.o
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
index c77a488..98167da 100644
--- a/arch/arm/mach-prima2/Makefile.boot
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -1,3 +1,5 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
deleted file mode 100644
index aebad7e..0000000
--- a/arch/arm/mach-prima2/clock.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * Clock tree for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-
-#define SIRFSOC_CLKC_CLK_EN0 0x0000
-#define SIRFSOC_CLKC_CLK_EN1 0x0004
-#define SIRFSOC_CLKC_REF_CFG 0x0014
-#define SIRFSOC_CLKC_CPU_CFG 0x0018
-#define SIRFSOC_CLKC_MEM_CFG 0x001c
-#define SIRFSOC_CLKC_SYS_CFG 0x0020
-#define SIRFSOC_CLKC_IO_CFG 0x0024
-#define SIRFSOC_CLKC_DSP_CFG 0x0028
-#define SIRFSOC_CLKC_GFX_CFG 0x002c
-#define SIRFSOC_CLKC_MM_CFG 0x0030
-#define SIRFSOC_LKC_LCD_CFG 0x0034
-#define SIRFSOC_CLKC_MMC_CFG 0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
-
-#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000)
-
-#define KHZ 1000
-#define MHZ (KHZ * KHZ)
-
-struct clk_ops {
- unsigned long (*get_rate)(struct clk *clk);
- long (*round_rate)(struct clk *clk, unsigned long rate);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*enable)(struct clk *clk);
- int (*disable)(struct clk *clk);
- struct clk *(*get_parent)(struct clk *clk);
- int (*set_parent)(struct clk *clk, struct clk *parent);
-};
-
-struct clk {
- struct clk *parent; /* parent clk */
- unsigned long rate; /* clock rate in Hz */
- signed char usage; /* clock enable count */
- signed char enable_bit; /* enable bit: 0 ~ 63 */
- unsigned short regofs; /* register offset */
- struct clk_ops *ops; /* clock operation */
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static inline unsigned long clkc_readl(unsigned reg)
-{
- return readl(SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-static inline void clkc_writel(u32 val, unsigned reg)
-{
- writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-/*
- * osc_rtc - real time oscillator - 32.768KHz
- * osc_sys - high speed oscillator - 26MHz
- */
-
-static struct clk clk_rtc = {
- .rate = 32768,
-};
-
-static struct clk clk_osc = {
- .rate = 26 * MHZ,
-};
-
-/*
- * std pll
- */
-static unsigned long std_pll_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
- SIRFSOC_CLKC_PLL1_CFG0;
-
- if (clkc_readl(regcfg2) & BIT(2)) {
- /* pll bypass mode */
- clk->rate = fin;
- } else {
- /* fout = fin * nf / nr / od */
- u32 cfg0 = clkc_readl(clk->regofs);
- u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
- u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
- u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
- WARN_ON(fin % MHZ);
- clk->rate = fin / MHZ * nf / nr / od * MHZ;
- }
-
- return clk->rate;
-}
-
-static int std_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin, nf, nr, od, reg;
-
- /*
- * fout = fin * nf / (nr * od);
- * set od = 1, nr = fin/MHz, so fout = nf * MHz
- */
-
- nf = rate / MHZ;
- if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
- return -EINVAL;
-
- fin = clk_get_rate(clk->parent);
- BUG_ON(fin < MHZ);
-
- nr = fin / MHZ;
- BUG_ON((fin % MHZ) || nr > BIT(6));
-
- od = 1;
-
- reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
- clkc_writel(reg, clk->regofs);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
- clkc_writel((nf >> 1) - 1, reg);
-
- reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
- while (!(clkc_readl(reg) & BIT(6)))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
- return 0;
-}
-
-static struct clk_ops std_pll_ops = {
- .get_rate = std_pll_get_rate,
- .set_rate = std_pll_set_rate,
-};
-
-static struct clk clk_pll1 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL1_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll2 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL2_CFG0,
- .ops = &std_pll_ops,
-};
-
-static struct clk clk_pll3 = {
- .parent = &clk_osc,
- .regofs = SIRFSOC_CLKC_PLL3_CFG0,
- .ops = &std_pll_ops,
-};
-
-/*
- * clock domains - cpu, mem, sys/io
- */
-
-static struct clk clk_mem;
-
-static struct clk *dmn_get_parent(struct clk *clk)
-{
- struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- WARN_ON((cfg & (BIT(3) - 1)) > 4);
- return clks[cfg & (BIT(3) - 1)];
-}
-
-static int dmn_set_parent(struct clk *clk, struct clk *parent)
-{
- const struct clk *clks[] = {
- &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
- };
- u32 cfg = clkc_readl(clk->regofs);
- int i;
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (clks[i] == parent) {
- cfg &= ~(BIT(3) - 1);
- clkc_writel(cfg | i, clk->regofs);
- /* BIT(3) - switching status: 1 - busy, 0 - done */
- while (clkc_readl(clk->regofs) & BIT(3))
- cpu_relax();
- return 0;
- }
- }
- return -EINVAL;
-}
-
-static unsigned long dmn_get_rate(struct clk *clk)
-{
- unsigned long fin = clk_get_rate(clk->parent);
- u32 cfg = clkc_readl(clk->regofs);
- if (cfg & BIT(24)) {
- /* fcd bypass mode */
- clk->rate = fin;
- } else {
- /*
- * wait count: bit[19:16], hold count: bit[23:20]
- */
- u32 wait = (cfg >> 16) & (BIT(4) - 1);
- u32 hold = (cfg >> 20) & (BIT(4) - 1);
-
- clk->rate = fin / (wait + hold + 2);
- }
-
- return clk->rate;
-}
-
-static int dmn_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long fin;
- unsigned ratio, wait, hold, reg;
- unsigned bits = (clk == &clk_mem) ? 3 : 4;
-
- fin = clk_get_rate(clk->parent);
- ratio = fin / rate;
-
- if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
- return -EINVAL;
-
- WARN_ON(fin % rate);
-
- wait = (ratio >> 1) - 1;
- hold = ratio - wait - 2;
-
- reg = clkc_readl(clk->regofs);
- reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
- reg |= (wait << 16) | (hold << 20) | BIT(25);
- clkc_writel(reg, clk->regofs);
-
- /* waiting FCD been effective */
- while (clkc_readl(clk->regofs) & BIT(25))
- cpu_relax();
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return 0;
-}
-
-/*
- * cpu clock has no FCD register in Prima2, can only change pll
- */
-static int cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret1, ret2;
- struct clk *cur_parent, *tmp_parent;
-
- cur_parent = dmn_get_parent(clk);
- BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
-
- /* switch to tmp pll before setting parent clock's rate */
- tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
- ret1 = dmn_set_parent(clk, tmp_parent);
- BUG_ON(ret1);
-
- ret2 = clk_set_rate(cur_parent, rate);
-
- ret1 = dmn_set_parent(clk, cur_parent);
-
- clk->rate = 0; /* set to zero will force recalculation */
-
- return ret2 ? ret2 : ret1;
-}
-
-static struct clk_ops cpu_ops = {
- .get_parent = dmn_get_parent,
- .set_parent = dmn_set_parent,
- .set_rate = cpu_set_rate,
-};
-
-static struct clk clk_cpu = {
- .parent = &clk_pll1,
- .regofs = SIRFSOC_CLKC_CPU_CFG,
- .ops = &cpu_ops,
-};
-
-
-static struct clk_ops msi_ops = {
- .set_rate = dmn_set_rate,
- .get_rate = dmn_get_rate,
- .set_parent = dmn_set_parent,
- .get_parent = dmn_get_parent,
-};
-
-static struct clk clk_mem = {
- .parent = &clk_pll2,
- .regofs = SIRFSOC_CLKC_MEM_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_sys = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_SYS_CFG,
- .ops = &msi_ops,
-};
-
-static struct clk clk_io = {
- .parent = &clk_pll3,
- .regofs = SIRFSOC_CLKC_IO_CFG,
- .ops = &msi_ops,
-};
-
-/*
- * on-chip clock sets
- */
-static struct clk_lookup onchip_clks[] = {
- {
- .dev_id = "rtc",
- .clk = &clk_rtc,
- }, {
- .dev_id = "osc",
- .clk = &clk_osc,
- }, {
- .dev_id = "pll1",
- .clk = &clk_pll1,
- }, {
- .dev_id = "pll2",
- .clk = &clk_pll2,
- }, {
- .dev_id = "pll3",
- .clk = &clk_pll3,
- }, {
- .dev_id = "cpu",
- .clk = &clk_cpu,
- }, {
- .dev_id = "mem",
- .clk = &clk_mem,
- }, {
- .dev_id = "sys",
- .clk = &clk_sys,
- }, {
- .dev_id = "io",
- .clk = &clk_io,
- },
-};
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (clk->parent)
- clk_enable(clk->parent);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (!clk->usage++ && clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return;
-
- WARN_ON(!clk->usage);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->usage == 0 && clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- if (clk->parent)
- clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->rate)
- return clk->rate;
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return 0;
-
- if (clk->ops && clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_rate)
- return -EINVAL;
-
- return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret;
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return -EINVAL;
-
- if (!clk->ops || !clk->ops->set_parent)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->ops->set_parent(clk, parent);
- if (!ret) {
- parent->usage += clk->usage;
- clk->parent->usage -= clk->usage;
- BUG_ON(clk->parent->usage < 0);
- clk->parent = parent;
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- unsigned long flags;
-
- if (unlikely(IS_ERR_OR_NULL(clk)))
- return NULL;
-
- if (!clk->ops || !clk->ops->get_parent)
- return clk->parent;
-
- spin_lock_irqsave(&clocks_lock, flags);
- clk->parent = clk->ops->get_parent(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static void __init sirfsoc_clk_init(void)
-{
- clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
-}
-
-static struct of_device_id clkc_ids[] = {
- { .compatible = "sirf,prima2-clkc" },
- {},
-};
-
-void __init sirfsoc_of_clk_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct map_desc sirfsoc_clkc_iodesc = {
- .virtual = SIRFSOC_CLOCK_VA_BASE,
- .type = MT_DEVICE,
- };
-
- np = of_find_matching_node(NULL, clkc_ids);
- if (!np)
- panic("unable to find compatible clkc node in dtb\n");
-
- if (of_address_to_resource(np, 0, &res))
- panic("unable to find clkc range in dtb");
- of_node_put(np);
-
- sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
- sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
-
- iotable_init(&sirfsoc_clkc_iodesc, 1);
-
- sirfsoc_clk_init();
-}
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/common.c
similarity index 80%
rename from arch/arm/mach-prima2/prima2.c
rename to arch/arm/mach-prima2/common.c
index 8f0429d..f25a541 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/common.c
@@ -30,21 +30,21 @@
sirfsoc_pm_init();
}
-static const char *prima2cb_dt_match[] __initdata = {
- "sirf,prima2-cb",
+#ifdef CONFIG_ARCH_PRIMA2
+static const char *prima2_dt_match[] __initdata = {
+ "sirf,prima2",
NULL
};
-MACHINE_START(PRIMA2_EVB, "prima2cb")
+DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .atag_offset = 0x100,
- .init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
- .dt_compat = prima2cb_dt_match,
+ .dt_compat = prima2_dt_match,
.restart = sirfsoc_restart,
MACHINE_END
+#endif
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index a7b9415..7dee917 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -63,7 +63,7 @@
np = of_find_matching_node(NULL, intc_ids);
if (!np)
- panic("unable to find compatible intc node in dtb\n");
+ return;
sirfsoc_intc_base = of_iomap(np, 0);
if (!sirfsoc_intc_base)
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index f224107..d95bf25 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -21,6 +21,8 @@
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
+#include "common.h"
+
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
@@ -188,9 +190,13 @@
static void __init sirfsoc_timer_init(void)
{
unsigned long rate;
+ struct clk *clk;
+
+ /* initialize clocking early, we want to set the OS timer */
+ sirfsoc_of_clk_init();
/* timer's input clock is io clock */
- struct clk *clk = clk_get_sys("io", NULL);
+ clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index fe2d1f8..8e6288d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -25,6 +25,18 @@
if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_PXA3XX_DT
+ bool "Support PXA3xx platforms from device tree"
+ select PXA3xx
+ select CPU_PXA300
+ select POWER_SUPPLY
+ select HAVE_PWM
+ select USE_OF
+ help
+ Include support for Marvell PXA3xx based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA3XX_DT is enabled.
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index be0f7df..2bedc9e 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -26,6 +26,9 @@
# NOTE: keep the order of boards in accordance to their order in Kconfig
+# Device Tree support
+obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
+
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 2a37a9a..d4e9499 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -127,8 +127,10 @@
if (clk->cken < 32)
CKENA |= mask;
- else
+ else if (clk->cken < 64)
CKENB |= mask;
+ else
+ CKENC |= mask;
}
void clk_pxa3xx_cken_disable(struct clk *clk)
@@ -137,8 +139,10 @@
if (clk->cken < 32)
CKENA &= ~mask;
- else
+ else if (clk->cken < 64)
CKENB &= ~mask;
+ else
+ CKENC &= ~mask;
}
const struct clkops clk_pxa3xx_cken_ops = {
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 207ecb4..f4d48d2 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,7 @@
#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define CKENC __REG(0x41340024) /* C Clock Enable Register */
#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5dae15e..b6cc181 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,6 +17,8 @@
#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/exception.h>
@@ -25,8 +27,6 @@
#include "generic.h"
-#define IRQ_BASE io_p2v(0x40d00000)
-
#define ICIP (0x000)
#define ICMR (0x004)
#define ICLR (0x008)
@@ -48,22 +48,19 @@
* This is for peripheral IRQs internal to the PXA chip.
*/
+static void __iomem *pxa_irq_base;
static int pxa_internal_irq_nr;
-
-static inline int cpu_has_ipr(void)
-{
- return !cpu_is_pxa25x();
-}
+static bool cpu_has_ipr;
static inline void __iomem *irq_base(int i)
{
- static unsigned long phys_base[] = {
- 0x40d00000,
- 0x40d0009c,
- 0x40d00130,
+ static unsigned long phys_base_offset[] = {
+ 0x0,
+ 0x9c,
+ 0x130,
};
- return io_p2v(phys_base[i]);
+ return pxa_irq_base + phys_base_offset[i];
}
void pxa_mask_irq(struct irq_data *d)
@@ -96,8 +93,8 @@
uint32_t icip, icmr, mask;
do {
- icip = __raw_readl(IRQ_BASE + ICIP);
- icmr = __raw_readl(IRQ_BASE + ICMR);
+ icip = __raw_readl(pxa_irq_base + ICIP);
+ icmr = __raw_readl(pxa_irq_base + ICMR);
mask = icip & icmr;
if (mask == 0)
@@ -128,6 +125,8 @@
BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
pxa_internal_irq_nr = irq_nr;
+ cpu_has_ipr = !cpu_is_pxa25x();
+ pxa_irq_base = io_p2v(0x40d00000);
for (n = 0; n < irq_nr; n += 32) {
void __iomem *base = irq_base(n >> 5);
@@ -136,8 +135,8 @@
__raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
/* initialize interrupt priority */
- if (cpu_has_ipr())
- __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+ if (cpu_has_ipr)
+ __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i));
irq = PXA_IRQ(i);
irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
@@ -168,9 +167,9 @@
__raw_writel(0, base + ICMR);
}
- if (cpu_has_ipr()) {
+ if (cpu_has_ipr) {
for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
+ saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i));
}
return 0;
@@ -187,11 +186,11 @@
__raw_writel(0, base + ICLR);
}
- if (cpu_has_ipr())
+ if (cpu_has_ipr)
for (i = 0; i < pxa_internal_irq_nr; i++)
- __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+ __raw_writel(saved_ipr[i], pxa_irq_base + IPR(i));
- __raw_writel(1, IRQ_BASE + ICCR);
+ __raw_writel(1, pxa_irq_base + ICCR);
}
#else
#define pxa_irq_suspend NULL
@@ -202,3 +201,93 @@
.suspend = pxa_irq_suspend,
.resume = pxa_irq_resume,
};
+
+#ifdef CONFIG_OF
+static struct irq_domain *pxa_irq_domain;
+
+static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ void __iomem *base = irq_base(hw / 32);
+
+ /* initialize interrupt priority */
+ if (cpu_has_ipr)
+ __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw));
+
+ irq_set_chip_and_handler(hw, &pxa_internal_irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(hw, base);
+ set_irq_flags(hw, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops pxa_irq_ops = {
+ .map = pxa_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static const struct of_device_id intc_ids[] __initconst = {
+ { .compatible = "marvell,pxa-intc", },
+ {}
+};
+
+void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ struct pxa_intc_conf *conf;
+ struct resource res;
+ int n, ret;
+
+ node = of_find_matching_node(NULL, intc_ids);
+ if (!node) {
+ pr_err("Failed to find interrupt controller in arch-pxa\n");
+ return;
+ }
+ of_id = of_match_node(intc_ids, node);
+ conf = of_id->data;
+
+ ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
+ &pxa_internal_irq_nr);
+ if (ret) {
+ pr_err("Not found marvell,intc-nr-irqs property\n");
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret < 0) {
+ pr_err("No registers defined for node\n");
+ return;
+ }
+ pxa_irq_base = io_p2v(res.start);
+
+ if (of_find_property(node, "marvell,intc-priority", NULL))
+ cpu_has_ipr = 1;
+
+ ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
+ if (ret < 0) {
+ pr_err("Failed to allocate IRQ numbers\n");
+ return;
+ }
+
+ pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0,
+ &pxa_irq_ops, NULL);
+ if (!pxa_irq_domain)
+ panic("Unable to add PXA IRQ domain\n");
+
+ irq_set_default_host(pxa_irq_domain);
+
+ for (n = 0; n < pxa_internal_irq_nr; n += 32) {
+ void __iomem *base = irq_base(n >> 5);
+
+ __raw_writel(0, base + ICMR); /* disable all IRQs */
+ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
+ }
+
+ /* only unmasked interrupts kick us out of idle */
+ __raw_writel(1, irq_base(0) + ICCR);
+
+ pxa_internal_irq_chip.irq_set_wake = fn;
+}
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
new file mode 100644
index 0000000..c9192ce
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa-dt.c
+ *
+ * Copyright (C) 2012 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/pxa3xx.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PXA3xx
+extern void __init pxa3xx_dt_init_irq(void);
+
+static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL),
+ OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL),
+ OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL),
+ OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL),
+ OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL),
+ {}
+};
+
+static void __init pxa3xx_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ pxa3xx_auxdata_lookup, NULL);
+}
+
+static const char *pxa3xx_dt_board_compat[] __initdata = {
+ "marvell,pxa300",
+ "marvell,pxa310",
+ "marvell,pxa320",
+ NULL,
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+ .map_io = pxa3xx_map_io,
+ .init_irq = pxa3xx_dt_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
+ .timer = &pxa_timer,
+ .restart = pxa_restart,
+ .init_machine = pxa3xx_dt_init,
+ .dt_compat = pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index dffb7e8..ff9c957 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <linux/i2c/pxa-i2c.h>
@@ -40,6 +41,8 @@
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
+
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -382,7 +385,7 @@
pxa_ext_wakeup_chip.irq_set_wake = fn;
}
-void __init pxa3xx_init_irq(void)
+static void __init __pxa3xx_init_irq(void)
{
/* enable CP6 access */
u32 value;
@@ -390,10 +393,23 @@
value |= (1 << 6);
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
- pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
}
+void __init pxa3xx_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_init_irq(56, pxa3xx_set_wake);
+}
+
+#ifdef CONFIG_OF
+void __init pxa3xx_dt_init_irq(void)
+{
+ __pxa3xx_init_irq();
+ pxa_dt_irq_init(pxa3xx_set_wake);
+}
+#endif /* CONFIG_OF */
+
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
@@ -466,7 +482,8 @@
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (!of_have_populated_dt())
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb..ff007d1 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
@@ -226,115 +225,10 @@
.cd_invert = true,
};
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
- .ref = 24000000,
- .vco_max = ICST307_VCO_MAX,
- .vco_min = ICST307_VCO_MIN,
- .vd_min = 4 + 8,
- .vd_max = 511 + 8,
- .rd_min = 1 + 2,
- .rd_max = 127 + 2,
- .s2div = icst307_s2div,
- .idx2s = icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
- void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, sys_lock);
- writel(val, clk->vcoreg);
- writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
- .ops = &oscvco_clk_ops,
- .params = &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
- .rate = 24000000,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
- { /* Bus clock */
- .con_id = "apb_pclk",
- .clk = &dummy_apb_pclk,
- }, { /* UART0 */
- .dev_id = "dev:uart0",
- .clk = &ref24_clk,
- }, { /* UART1 */
- .dev_id = "dev:uart1",
- .clk = &ref24_clk,
- }, { /* UART2 */
- .dev_id = "dev:uart2",
- .clk = &ref24_clk,
- }, { /* UART3 */
- .dev_id = "fpga:uart3",
- .clk = &ref24_clk,
- }, { /* UART3 is on the dev chip in PB1176 */
- .dev_id = "dev:uart3",
- .clk = &ref24_clk,
- }, { /* UART4 only exists in PB1176 */
- .dev_id = "fpga:uart4",
- .clk = &ref24_clk,
- }, { /* KMI0 */
- .dev_id = "fpga:kmi0",
- .clk = &ref24_clk,
- }, { /* KMI1 */
- .dev_id = "fpga:kmi1",
- .clk = &ref24_clk,
- }, { /* MMC0 */
- .dev_id = "fpga:mmc0",
- .clk = &ref24_clk,
- }, { /* CLCD is in the PB1176 and EB DevChip */
- .dev_id = "dev:clcd",
- .clk = &oscvco_clk,
- }, { /* PB:CLCD */
- .dev_id = "issp:clcd",
- .clk = &oscvco_clk,
- }, { /* SSP */
- .dev_id = "dev:ssp0",
- .clk = &ref24_clk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
void __init realview_init_early(void)
{
void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
- if (machine_is_realview_pb1176())
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
- else
- oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
}
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d077..0000000
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- const struct icst_params *params;
- void __iomem *vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index d7a6e9c..ce77476 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -413,6 +414,7 @@
else
timer_irq = IRQ_EB_TIMER0_1;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(timer_irq);
realview_eb_twd_init();
}
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 361f898..e21711d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,6 +29,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -325,6 +326,7 @@
timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
realview_timer_init(IRQ_DC1176_TIMER0);
}
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index c56bc8d..b442fb2 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -311,6 +312,7 @@
timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_TC11MP_TIMER0_1);
realview_pb11mp_twd_init();
}
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 0409375..1435cd8 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,6 +27,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -260,6 +261,7 @@
timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBA8_TIMER0_1);
}
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 97885dc..5d2c8be 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,6 +26,7 @@
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
#include <asm/leds.h>
@@ -319,6 +320,7 @@
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+ realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
realview_timer_init(IRQ_PBX_TIMER0_1);
realview_pbx_twd_init();
}
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index a5eeb62..57aee91 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -138,19 +138,7 @@
.remove = h1940bt_remove,
};
-
-static int __init h1940bt_init(void)
-{
- return platform_driver_register(&h1940bt_driver);
-}
-
-static void __exit h1940bt_exit(void)
-{
- platform_driver_unregister(&h1940bt_driver);
-}
-
-module_init(h1940bt_init);
-module_exit(h1940bt_exit);
+module_platform_driver(h1940bt_driver);
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 5a7d0c0..0c7ed7a 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -424,7 +424,8 @@
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
}
}
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index ae73ba3..4713347 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -512,8 +512,8 @@
{
printk(KERN_INFO "powering system down...\n");
- s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
- s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPC(5));
}
static void __init jive_machine_init(void)
@@ -623,11 +623,11 @@
gpio_request(S3C2410_GPB(7), "jive spi");
gpio_direction_output(S3C2410_GPB(7), 1);
- s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
- s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPB(6));
- s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
- s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPG(8));
/* initialise the WM8750 spi */
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index bd6d252..734bbfe 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -638,9 +638,9 @@
gpio_free(S3C2410_GPG(4));
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
+ gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
- s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
- s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+ gpio_free(S3C2410_GPB(1));
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 5c05ba1..a71a551 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -119,17 +119,17 @@
static void __init nexcoder_sensorboard_init(void)
{
- // Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
- s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
- s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+ /* Initialize SCCB bus */
+ gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(14)); /* IICSCL */
+ gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPE(15)); /* IICSDA */
- // Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
- s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
- s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+ /* Power up the sensor board */
+ gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
+ gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+ gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
}
static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index ad2792d..5876c6b 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -175,18 +175,7 @@
},
};
-static int __init osiris_dvs_init(void)
-{
- return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
- platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
+module_platform_driver(osiris_dvs_driver);
MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 95d0772..c0fb3c1 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -274,8 +274,8 @@
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
- s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+ gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(21));
return 0;
}
@@ -396,7 +396,8 @@
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
+ gpio_free(S3C2410_GPA(0));
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 2704bcd..d35b94e 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -21,9 +21,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#define IO_BASE 0xe0000000
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
@@ -104,20 +101,6 @@
extern void shark_init_irq(void);
-static struct map_desc shark_io_desc[] __initdata = {
- {
- .virtual = IO_BASE,
- .pfn = __phys_to_pfn(IO_START),
- .length = IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init shark_map_io(void)
-{
- iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
-}
-
#define IRQ_TIMER 0
#define HZ_TIME ((1193180 + HZ/2) / HZ)
@@ -158,7 +141,6 @@
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
- .map_io = shark_map_io,
.init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 20eb2bf..d129119 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -12,9 +12,10 @@
*/
.macro addruart, rp, rv, tmp
- mov \rp, #0xe0000000
- orr \rp, \rp, #0x000003f8
- mov \rv, \rp
+ mov \rp, #0x3f8
+ orr \rv, \rp, #0xfe000000
+ orr \rv, \rv, #0x00e00000
+ orr \rp, \rp, #0x40000000
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index 5901b09..c9e49f0 100644
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -8,7 +8,8 @@
* warranty of any kind, whether express or implied.
*/
.macro get_irqnr_preamble, base, tmp
- mov \base, #0xe0000000
+ mov \base, #0xfe000000
+ orr \base, \base, #0x00e00000
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
deleted file mode 100644
index 1a45fc0..0000000
--- a/arch/arm/mach-shark/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) ((void __iomem *)(0xe0000000 + (a)))
-
-#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index 9089407..b8b4ab3 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -8,12 +8,15 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#define IO_START 0x40000000
+
static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->number == 0)
@@ -44,6 +47,8 @@
pcibios_min_mem = 0x50000000;
vga_base = 0xe8000000;
+ pci_ioremap_io(0, IO_START);
+
pci_common_init(&shark_pci);
return 0;
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 498efd9..5e41019 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,3 +7,7 @@
#
#params_phys-y (Instead: Pass atags pointer in r2)
#initrd_phys-y (Instead: Use compiled-in initramfs)
+
+dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb
+dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb
+dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index d82c010..cfc3b5c 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -40,7 +40,6 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
-#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 9077aaa..5f3c03b 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -34,7 +34,6 @@
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
- select USE_OF
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
@@ -60,25 +59,6 @@
comment "Tegra board type"
-config MACH_HARMONY
- bool "Harmony board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for nVidia Harmony development platform
-
-config MACH_PAZ00
- bool "Paz00 board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for the Toshiba AC100/Dynabook AZ netbook
-
-config MACH_TRIMSLICE
- bool "TrimSlice board"
- depends on ARCH_TEGRA_2x_SOC
- select TEGRA_PCI
- help
- Support for CompuLab TrimSlice platform
-
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
@@ -130,13 +110,6 @@
endchoice
-config TEGRA_SYSTEM_DMA
- bool "Enable system DMA driver for NVIDIA Tegra SoCs"
- default y
- help
- Adds system DMA functionality for NVIDIA Tegra SoCs, used by
- several Tegra device drivers
-
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 84d21f5..04eb74e 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -22,7 +22,6 @@
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
@@ -30,13 +29,6 @@
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
-obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o
-obj-$(CONFIG_MACH_PAZ00) += board-paz00.o
-obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o
-
-obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o
-obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 7a1bb62..54c16aa 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -3,9 +3,13 @@
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index dc0fe38..b5015d0 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -28,7 +28,7 @@
#include "apbio.h"
-#if defined(CONFIG_TEGRA_SYSTEM_DMA) || defined(CONFIG_TEGRA20_APB_DMA)
+#if defined(CONFIG_TEGRA20_APB_DMA)
static DEFINE_MUTEX(tegra_apb_dma_lock);
static u32 *tegra_apb_bb;
static dma_addr_t tegra_apb_bb_phys;
@@ -37,121 +37,6 @@
static u32 tegra_apb_readl_direct(unsigned long offset);
static void tegra_apb_writel_direct(u32 value, unsigned long offset);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static struct tegra_dma_channel *tegra_apb_dma;
-
-bool tegra_apb_init(void)
-{
- struct tegra_dma_channel *ch;
-
- mutex_lock(&tegra_apb_dma_lock);
-
- /* Check to see if we raced to setup */
- if (tegra_apb_dma)
- goto out;
-
- ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
- TEGRA_DMA_SHARED);
-
- if (!ch)
- goto out_fail;
-
- tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
- &tegra_apb_bb_phys, GFP_KERNEL);
- if (!tegra_apb_bb) {
- pr_err("%s: can not allocate bounce buffer\n", __func__);
- tegra_dma_free_channel(ch);
- goto out_fail;
- }
-
- tegra_apb_dma = ch;
-out:
- mutex_unlock(&tegra_apb_dma_lock);
- return true;
-
-out_fail:
- mutex_unlock(&tegra_apb_dma_lock);
- return false;
-}
-
-static void apb_dma_complete(struct tegra_dma_req *req)
-{
- complete(&tegra_apb_wait);
-}
-
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
-{
- struct tegra_dma_req req;
- int ret;
-
- if (!tegra_apb_dma && !tegra_apb_init())
- return tegra_apb_readl_direct(offset);
-
- mutex_lock(&tegra_apb_dma_lock);
- req.complete = apb_dma_complete;
- req.to_memory = 1;
- req.dest_addr = tegra_apb_bb_phys;
- req.dest_bus_width = 32;
- req.dest_wrap = 1;
- req.source_addr = offset;
- req.source_bus_width = 32;
- req.source_wrap = 4;
- req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
- req.size = 4;
-
- INIT_COMPLETION(tegra_apb_wait);
-
- tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb read dma timed out")) {
- tegra_dma_dequeue_req(tegra_apb_dma, &req);
- *(u32 *)tegra_apb_bb = 0;
- }
-
- mutex_unlock(&tegra_apb_dma_lock);
- return *((u32 *)tegra_apb_bb);
-}
-
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
-{
- struct tegra_dma_req req;
- int ret;
-
- if (!tegra_apb_dma && !tegra_apb_init()) {
- tegra_apb_writel_direct(value, offset);
- return;
- }
-
- mutex_lock(&tegra_apb_dma_lock);
- *((u32 *)tegra_apb_bb) = value;
- req.complete = apb_dma_complete;
- req.to_memory = 0;
- req.dest_addr = offset;
- req.dest_wrap = 4;
- req.dest_bus_width = 32;
- req.source_addr = tegra_apb_bb_phys;
- req.source_bus_width = 32;
- req.source_wrap = 1;
- req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
- req.size = 4;
-
- INIT_COMPLETION(tegra_apb_wait);
-
- tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb write dma timed out"))
- tegra_dma_dequeue_req(tegra_apb_dma, &req);
-
- mutex_unlock(&tegra_apb_dma_lock);
-}
-
-#else
static struct dma_chan *tegra_apb_dma_chan;
static struct dma_slave_config dma_sconfig;
@@ -279,7 +164,6 @@
pr_err("error in writing offset 0x%08lx using dma\n", offset);
mutex_unlock(&tegra_apb_dma_lock);
}
-#endif
#else
#define tegra_apb_readl_using_dma tegra_apb_readl_direct
#define tegra_apb_writel_using_dma tegra_apb_writel_direct
@@ -293,12 +177,12 @@
static u32 tegra_apb_readl_direct(unsigned long offset)
{
- return readl(IO_TO_VIRT(offset));
+ return readl(IO_ADDRESS(offset));
}
static void tegra_apb_writel_direct(u32 value, unsigned long offset)
{
- writel(value, IO_TO_VIRT(offset));
+ writel(value, IO_ADDRESS(offset));
}
void tegra_apb_io_init(void)
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index b4e7cc1..5957ffb 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -42,7 +42,6 @@
#include <mach/irqs.h>
#include "board.h"
-#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
@@ -96,54 +95,40 @@
tegra20_auxdata_lookup, NULL);
}
-#ifdef CONFIG_MACH_TRIMSLICE
static void __init trimslice_init(void)
{
+#ifdef CONFIG_TEGRA_PCI
int ret;
ret = tegra_pcie_init(true, true);
if (ret)
pr_err("tegra_pci_init() failed: %d\n", ret);
-}
#endif
+}
-#ifdef CONFIG_MACH_HARMONY
static void __init harmony_init(void)
{
+#ifdef CONFIG_TEGRA_PCI
int ret;
- ret = harmony_regulator_init();
- if (ret) {
- pr_err("harmony_regulator_init() failed: %d\n", ret);
- return;
- }
-
ret = harmony_pcie_init();
if (ret)
pr_err("harmony_pcie_init() failed: %d\n", ret);
-}
#endif
+}
-#ifdef CONFIG_MACH_PAZ00
static void __init paz00_init(void)
{
tegra_paz00_wifikill_init();
}
-#endif
static struct {
char *machine;
void (*init)(void);
} board_init_funcs[] = {
-#ifdef CONFIG_MACH_TRIMSLICE
{ "compulab,trimslice", trimslice_init },
-#endif
-#ifdef CONFIG_MACH_HARMONY
{ "nvidia,harmony", harmony_init },
-#endif
-#ifdef CONFIG_MACH_PAZ00
{ "compal,paz00", paz00_init },
-#endif
};
static void __init tegra_dt_init_late(void)
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index e8c3fda..3cdc1bb 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -18,35 +18,57 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/err.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <asm/mach-types.h>
#include "board.h"
-#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
int __init harmony_pcie_init(void)
{
+ struct device_node *np;
+ int en_vdd_1v05;
struct regulator *regulator = NULL;
int err;
- err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
- if (err)
+ np = of_find_node_by_path("/regulators/regulator@3");
+ if (!np) {
+ pr_err("%s: of_find_node_by_path failed\n", __func__);
+ return -ENODEV;
+ }
+
+ en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
+ if (en_vdd_1v05 < 0) {
+ pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
+ en_vdd_1v05);
+ return en_vdd_1v05;
+ }
+
+ err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
+ if (err) {
+ pr_err("%s: gpio_request failed: %d\n", __func__, err);
return err;
+ }
- gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(en_vdd_1v05, 1);
- regulator = regulator_get(NULL, "pex_clk");
- if (IS_ERR_OR_NULL(regulator))
+ regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
+ if (IS_ERR_OR_NULL(regulator)) {
+ pr_err("%s: regulator_get failed: %d\n", __func__,
+ (int)PTR_ERR(regulator));
goto err_reg;
+ }
regulator_enable(regulator);
err = tegra_pcie_init(true, true);
- if (err)
+ if (err) {
+ pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
goto err_pcie;
+ }
return 0;
@@ -54,20 +76,9 @@
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
+ gpio_free(en_vdd_1v05);
return err;
}
-static int __init harmony_pcie_initcall(void)
-{
- if (!machine_is_harmony())
- return 0;
-
- return harmony_pcie_init();
-}
-
-/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_initcall);
-
#endif
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
deleted file mode 100644
index 83d420f..0000000
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-harmony.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map harmony_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, driven),
- TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, tristate),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uarta", up, tristate),
- TEGRA_MAP_MUXCONF("irtx", "uarta", up, tristate),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", na, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate),
- TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, tristate),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("spib", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("uad", "irda", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = harmony_map,
- .map_count = ARRAY_SIZE(harmony_map),
-};
-
-void harmony_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
deleted file mode 100644
index b7344be..0000000
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/tps6586x.h>
-#include <linux/of.h>
-#include <linux/of_i2c.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-
-#include "board-harmony.h"
-
-static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
- REGULATOR_SUPPLY("pex_clk", NULL),
-};
-
-static struct regulator_init_data ldo0_data = {
- .supply_regulator = "vdd_sm2",
- .constraints = {
- .name = "vdd_ldo0",
- .min_uV = 3300 * 1000,
- .max_uV = 3300 * 1000,
- .valid_modes_mask = (REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_STANDBY),
- .valid_ops_mask = (REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_VOLTAGE),
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
- .consumer_supplies = tps658621_ldo0_supply,
-};
-
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\
- static struct regulator_init_data _id##_data = { \
- .supply_regulator = _supply, \
- .constraints = { \
- .name = _name, \
- .min_uV = (_minmv)*1000, \
- .max_uV = (_maxmv)*1000, \
- .valid_modes_mask = (REGULATOR_MODE_NORMAL | \
- REGULATOR_MODE_STANDBY), \
- .valid_ops_mask = (REGULATOR_CHANGE_MODE | \
- REGULATOR_CHANGE_STATUS | \
- REGULATOR_CHANGE_VOLTAGE), \
- .always_on = _on, \
- }, \
- }
-
-HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1);
-
-#define TPS_REG(_id, _data) \
- { \
- .id = TPS6586X_ID_##_id, \
- .name = "tps6586x-regulator", \
- .platform_data = _data, \
- }
-
-static struct tps6586x_subdev_info tps_devs[] = {
- TPS_REG(SM_0, &sm0_data),
- TPS_REG(SM_1, &sm1_data),
- TPS_REG(SM_2, &sm2_data),
- TPS_REG(LDO_0, &ldo0_data),
- TPS_REG(LDO_1, &ldo1_data),
- TPS_REG(LDO_2, &ldo2_data),
- TPS_REG(LDO_3, &ldo3_data),
- TPS_REG(LDO_4, &ldo4_data),
- TPS_REG(LDO_5, &ldo5_data),
- TPS_REG(LDO_6, &ldo6_data),
- TPS_REG(LDO_7, &ldo7_data),
- TPS_REG(LDO_8, &ldo8_data),
- TPS_REG(LDO_9, &ldo9_data),
-};
-
-static struct tps6586x_platform_data tps_platform = {
- .irq_base = TEGRA_NR_IRQS,
- .num_subdevs = ARRAY_SIZE(tps_devs),
- .subdevs = tps_devs,
- .gpio_base = HARMONY_GPIO_TPS6586X(0),
-};
-
-static struct i2c_board_info __initdata harmony_regulators[] = {
- {
- I2C_BOARD_INFO("tps6586x", 0x34),
- .irq = INT_EXTERNAL_PMU,
- .platform_data = &tps_platform,
- },
-};
-
-int __init harmony_regulator_init(void)
-{
- regulator_register_always_on(0, "vdd_sys",
- NULL, 0, 5000000);
-
- if (machine_is_harmony()) {
- i2c_register_board_info(3, harmony_regulators, 1);
- } else { /* Harmony, booted using device tree */
- struct device_node *np;
- struct i2c_adapter *adapter;
-
- np = of_find_node_by_path("/i2c@7000d000");
- if (np == NULL) {
- pr_err("Could not find device_node for DVC I2C\n");
- return -ENODEV;
- }
-
- adapter = of_find_i2c_adapter_by_node(np);
- if (!adapter) {
- pr_err("Could not find i2c_adapter for DVC I2C\n");
- return -ENODEV;
- }
-
- i2c_new_device(adapter, harmony_regulators);
- }
-
- return 0;
-}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
deleted file mode 100644
index e65e837..0000000
--- a/arch/arm/mach-tegra/board-harmony.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <sound/wm8903.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/tegra_wm8903_pdata.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-
-static struct tegra_wm8903_platform_data harmony_audio_pdata = {
- .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
- .gpio_hp_det = TEGRA_GPIO_HP_DET,
- .gpio_hp_mute = -1,
- .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN,
- .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN,
-};
-
-static struct platform_device harmony_audio_device = {
- .name = "tegra-snd-wm8903",
- .id = 0,
- .dev = {
- .platform_data = &harmony_audio_pdata,
- },
-};
-
-static struct wm8903_platform_data harmony_wm8903_pdata = {
- .irq_active_low = 0,
- .micdet_cfg = 0,
- .micdet_delay = 100,
- .gpio_base = HARMONY_GPIO_WM8903(0),
- .gpio_cfg = {
- 0,
- 0,
- WM8903_GPIO_CONFIG_ZERO,
- 0,
- 0,
- },
-};
-
-static struct i2c_board_info __initdata wm8903_board_info = {
- I2C_BOARD_INFO("wm8903", 0x1a),
- .platform_data = &harmony_wm8903_pdata,
-};
-
-static void __init harmony_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
- platform_device_register(&tegra_i2c_device4);
-
- wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
- i2c_register_board_info(0, &wm8903_board_info, 1);
-}
-
-static struct platform_device *harmony_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device1,
- &tegra_sdhci_device2,
- &tegra_sdhci_device4,
- &tegra_ehci3_device,
- &tegra_i2s_device1,
- &tegra_das_device,
- &harmony_audio_device,
-};
-
-static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 2;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
- mi->bank[1].start = SZ_512M;
- mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
- /* name parent rate enabled */
- { "uartd", "pll_p", 216000000, true },
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { "usb3", "clk_m", 12000000, true },
- { NULL, NULL, 0, 0},
-};
-
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
- .cd_gpio = TEGRA_GPIO_SD2_CD,
- .wp_gpio = TEGRA_GPIO_SD2_WP,
- .power_gpio = TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TEGRA_GPIO_SD4_CD,
- .wp_gpio = TEGRA_GPIO_SD4_WP,
- .power_gpio = TEGRA_GPIO_SD4_POWER,
- .is_8bit = 1,
-};
-
-static void __init tegra_harmony_init(void)
-{
- tegra_clk_init_from_table(harmony_clk_init_table);
-
- harmony_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
- harmony_i2c_init();
- harmony_regulator_init();
-}
-
-MACHINE_START(HARMONY, "harmony")
- .atag_offset = 0x100,
- .fixup = tegra_harmony_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_harmony_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
deleted file mode 100644
index 139d96c..0000000
--- a/arch/arm/mach-tegra/board-harmony.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_HARMONY_H
-#define _MACH_TEGRA_BOARD_HARMONY_H
-
-#include <mach/gpio-tegra.h>
-
-#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
-#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6
-#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN HARMONY_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
-#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
-#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
-#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
-
-void harmony_pinmux_init(void);
-int harmony_regulator_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
deleted file mode 100644
index 6f1111b..0000000
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00-pinmux.c
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-paz00.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map paz00_map[] = {
- TEGRA_MAP_MUXCONF("ata", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, driven),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "pllc_out1", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "rsvd1", up, tristate),
- TEGRA_MAP_MUXCONF("dtb", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtc", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "rsvd1", up, tristate),
- TEGRA_MAP_MUXCONF("dte", "rsvd1", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmc", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uarta", up, driven),
- TEGRA_MAP_MUXCONF("irtx", "uarta", up, driven),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "sdio2", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "owr", up, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, tristate),
- TEGRA_MAP_MUXCONF("sdc", "twc", up, tristate),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, tristate),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, tristate),
- TEGRA_MAP_MUXCONF("slxc", "spi4", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spi4", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spia", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spib", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, driven),
- TEGRA_MAP_MUXCONF("spid", "gmi", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "rsvd4", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, driven),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uac", "rsvd4", none, driven),
- TEGRA_MAP_MUXCONF("uad", "spdif", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = paz00_map,
- .map_count = ARRAY_SIZE(paz00_map),
-};
-
-void paz00_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 4b64af5..5930551 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,72 +17,10 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio_keys.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/rfkill-gpio.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
#include "board-paz00.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- /* serial port on JP1 */
- .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
- .mapbase = TEGRA_UARTA_BASE,
- .irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- /* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
- .mapbase = TEGRA_UARTC_BASE,
- .irq = INT_UARTC,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
.name = "wifi_rfkill",
@@ -99,137 +37,7 @@
},
};
-static struct gpio_led gpio_leds[] = {
- {
- .name = "wifi-led",
- .default_trigger = "rfkill0",
- .gpio = TEGRA_WIFI_LED,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = TEGRA_GPIO_POWERKEY,
- .active_low = 1,
- .desc = "Power",
- .type = EV_KEY,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data paz00_gpio_keys = {
- .buttons = paz00_gpio_keys_buttons,
- .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &paz00_gpio_keys,
- },
-};
-
-static struct platform_device *paz00_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device4,
- &tegra_sdhci_device1,
- &leds_gpio,
- &gpio_keys_device,
-};
-
-static void paz00_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device4);
-}
-
-static void paz00_usb_init(void)
-{
- tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
-
- platform_device_register(&tegra_ehci2_device);
- platform_device_register(&tegra_ehci3_device);
-}
-
-static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
-}
-
-static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
- /* name parent rate enabled */
- { "uarta", "pll_p", 216000000, true },
- { "uartc", "pll_p", 216000000, true },
-
- { "usbd", "clk_m", 12000000, false },
- { "usb2", "clk_m", 12000000, false },
- { "usb3", "clk_m", 12000000, false },
-
- { NULL, NULL, 0, 0},
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = TEGRA_GPIO_SD1_CD,
- .wp_gpio = TEGRA_GPIO_SD1_WP,
- .power_gpio = TEGRA_GPIO_SD1_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
- .is_8bit = 1,
-};
-
void __init tegra_paz00_wifikill_init(void)
{
platform_device_register(&wifi_rfkill_device);
}
-
-static void __init tegra_paz00_init(void)
-{
- tegra_clk_init_from_table(paz00_clk_init_table);
-
- paz00_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
- tegra_paz00_wifikill_init();
-
- paz00_i2c_init();
- paz00_usb_init();
-}
-
-MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .atag_offset = 0x100,
- .fixup = tegra_paz00_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_paz00_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index 3c9f8da..25c08ec 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,24 +17,9 @@
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
-#include <mach/gpio-tegra.h>
+#include "gpio-names.h"
-/* SDCARD */
-#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
-
-/* ULPI */
-#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
-
-/* WIFI */
#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
-#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
-
-/* WakeUp */
-#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7
-
-void paz00_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
deleted file mode 100644
index 7b39511..0000000
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice-pinmux.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/kernel.h>
-
-#include "board-trimslice.h"
-#include "board-pinmux.h"
-
-static struct pinctrl_map trimslice_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, tristate),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, tristate),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", down, tristate),
- TEGRA_MAP_MUXCONF("crtp", "crt", none, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", down, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, tristate),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, tristate),
- TEGRA_MAP_MUXCONF("ddc", "i2c2", up, driven),
- TEGRA_MAP_MUXCONF("dta", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtb", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtc", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtd", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dte", "vi", none, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", up, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "nand", none, tristate),
- TEGRA_MAP_MUXCONF("gmc", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("gme", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("gpu", "uarta", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, tristate),
- TEGRA_MAP_MUXCONF("irrx", "uartb", up, tristate),
- TEGRA_MAP_MUXCONF("irtx", "uartb", up, tristate),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, tristate),
- TEGRA_MAP_MUXCONF("lcsn", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsdi", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", up, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, tristate),
- TEGRA_MAP_MUXCONF("pta", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("rm", "i2c1", up, driven),
- TEGRA_MAP_MUXCONF("sdb", "pwm", na, driven),
- TEGRA_MAP_MUXCONF("sdc", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdd", "pwm", up, driven),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", none, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("slxc", "sdio3", none, tristate),
- TEGRA_MAP_MUXCONF("slxd", "sdio3", none, tristate),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spdo", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "spi2", down, tristate),
- TEGRA_MAP_MUXCONF("spib", "spi2", down, tristate),
- TEGRA_MAP_MUXCONF("spic", "spi2", up, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", up, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, tristate),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("uad", "irda", up, tristate),
- TEGRA_MAP_MUXCONF("uca", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("ucb", "uartc", up, tristate),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, tristate),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct tegra_board_pinmux_conf conf = {
- .maps = trimslice_map,
- .map_count = ARRAY_SIZE(trimslice_map),
-};
-
-void trimslice_pinmux_init(void)
-{
- tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
deleted file mode 100644
index 776aa95..0000000
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-#include "board-trimslice.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
- .mapbase = TEGRA_UARTA_BASE,
- .irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TRIMSLICE_GPIO_SD4_CD,
- .wp_gpio = TRIMSLICE_GPIO_SD4_WP,
- .power_gpio = -1,
-};
-
-static struct platform_device trimslice_audio_device = {
- .name = "tegra-snd-trimslice",
- .id = 0,
-};
-
-static struct platform_device *trimslice_devices[] __initdata = {
- &debug_uart,
- &tegra_sdhci_device1,
- &tegra_sdhci_device4,
- &tegra_i2s_device1,
- &tegra_das_device,
- &trimslice_audio_device,
-};
-
-static struct i2c_board_info trimslice_i2c3_board_info[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
- {
- I2C_BOARD_INFO("em3027", 0x56),
- },
-};
-
-static void trimslice_i2c_init(void)
-{
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
-
- i2c_register_board_info(2, trimslice_i2c3_board_info,
- ARRAY_SIZE(trimslice_i2c3_board_info));
-}
-
-static void trimslice_usb_init(void)
-{
- struct tegra_ehci_platform_data *pdata;
-
- pdata = tegra_ehci1_device.dev.platform_data;
- pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
-
- tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
-
- platform_device_register(&tegra_ehci3_device);
- platform_device_register(&tegra_ehci2_device);
- platform_device_register(&tegra_ehci1_device);
-}
-
-static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
- mi->nr_banks = 2;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = 448 * SZ_1M;
- mi->bank[1].start = SZ_512M;
- mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
- /* name parent rate enabled */
- { "uarta", "pll_p", 216000000, true },
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { NULL, NULL, 0, 0},
-};
-
-static int __init tegra_trimslice_pci_init(void)
-{
- if (!machine_is_trimslice())
- return 0;
-
- return tegra_pcie_init(true, true);
-}
-subsys_initcall(tegra_trimslice_pci_init);
-
-static void __init tegra_trimslice_init(void)
-{
- tegra_clk_init_from_table(trimslice_clk_init_table);
-
- trimslice_pinmux_init();
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
-
- trimslice_i2c_init();
- trimslice_usb_init();
-}
-
-MACHINE_START(TRIMSLICE, "trimslice")
- .atag_offset = 0x100,
- .fixup = tegra_trimslice_fixup,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_trimslice_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
deleted file mode 100644
index 50f128d..0000000
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.h
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
-#define _MACH_TEGRA_BOARD_TRIMSLICE_H
-
-#include <mach/gpio-tegra.h>
-
-#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
-#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
-
-#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */
-#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */
-
-void trimslice_pinmux_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
deleted file mode 100644
index 29c5114..0000000
--- a/arch/arm/mach-tegra/dma.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/*
- * arch/arm/mach-tegra/dma.c
- *
- * System DMA driver for NVIDIA Tegra SoCs
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "apbio.h"
-
-#define APB_DMA_GEN 0x000
-#define GEN_ENABLE (1<<31)
-
-#define APB_DMA_CNTRL 0x010
-
-#define APB_DMA_IRQ_MASK 0x01c
-
-#define APB_DMA_IRQ_MASK_SET 0x020
-
-#define APB_DMA_CHAN_CSR 0x000
-#define CSR_ENB (1<<31)
-#define CSR_IE_EOC (1<<30)
-#define CSR_HOLD (1<<29)
-#define CSR_DIR (1<<28)
-#define CSR_ONCE (1<<27)
-#define CSR_FLOW (1<<21)
-#define CSR_REQ_SEL_SHIFT 16
-#define CSR_WCOUNT_SHIFT 2
-#define CSR_WCOUNT_MASK 0xFFFC
-
-#define APB_DMA_CHAN_STA 0x004
-#define STA_BUSY (1<<31)
-#define STA_ISE_EOC (1<<30)
-#define STA_HALT (1<<29)
-#define STA_PING_PONG (1<<28)
-#define STA_COUNT_SHIFT 2
-#define STA_COUNT_MASK 0xFFFC
-
-#define APB_DMA_CHAN_AHB_PTR 0x010
-
-#define APB_DMA_CHAN_AHB_SEQ 0x014
-#define AHB_SEQ_INTR_ENB (1<<31)
-#define AHB_SEQ_BUS_WIDTH_SHIFT 28
-#define AHB_SEQ_BUS_WIDTH_MASK (0x7<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_8 (0<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_16 (1<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_32 (2<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_64 (3<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_128 (4<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_DATA_SWAP (1<<27)
-#define AHB_SEQ_BURST_MASK (0x7<<24)
-#define AHB_SEQ_BURST_1 (4<<24)
-#define AHB_SEQ_BURST_4 (5<<24)
-#define AHB_SEQ_BURST_8 (6<<24)
-#define AHB_SEQ_DBL_BUF (1<<19)
-#define AHB_SEQ_WRAP_SHIFT 16
-#define AHB_SEQ_WRAP_MASK (0x7<<AHB_SEQ_WRAP_SHIFT)
-
-#define APB_DMA_CHAN_APB_PTR 0x018
-
-#define APB_DMA_CHAN_APB_SEQ 0x01c
-#define APB_SEQ_BUS_WIDTH_SHIFT 28
-#define APB_SEQ_BUS_WIDTH_MASK (0x7<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_8 (0<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_16 (1<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_32 (2<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_64 (3<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_128 (4<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_DATA_SWAP (1<<27)
-#define APB_SEQ_WRAP_SHIFT 16
-#define APB_SEQ_WRAP_MASK (0x7<<APB_SEQ_WRAP_SHIFT)
-
-#define TEGRA_SYSTEM_DMA_CH_NR 16
-#define TEGRA_SYSTEM_DMA_AVP_CH_NUM 4
-#define TEGRA_SYSTEM_DMA_CH_MIN 0
-#define TEGRA_SYSTEM_DMA_CH_MAX \
- (TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1)
-
-#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-
-static const unsigned int ahb_addr_wrap_table[8] = {
- 0, 32, 64, 128, 256, 512, 1024, 2048
-};
-
-static const unsigned int apb_addr_wrap_table[8] = {
- 0, 1, 2, 4, 8, 16, 32, 64
-};
-
-static const unsigned int bus_width_table[5] = {
- 8, 16, 32, 64, 128
-};
-
-#define TEGRA_DMA_NAME_SIZE 16
-struct tegra_dma_channel {
- struct list_head list;
- int id;
- spinlock_t lock;
- char name[TEGRA_DMA_NAME_SIZE];
- void __iomem *addr;
- int mode;
- int irq;
- int req_transfer_count;
-};
-
-#define NV_DMA_MAX_CHANNELS 32
-
-static bool tegra_dma_initialized;
-static DEFINE_MUTEX(tegra_dma_lock);
-static DEFINE_SPINLOCK(enable_lock);
-
-static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
-static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-static void tegra_dma_stop(struct tegra_dma_channel *ch);
-
-void tegra_dma_flush(struct tegra_dma_channel *ch)
-{
-}
-EXPORT_SYMBOL(tegra_dma_flush);
-
-void tegra_dma_dequeue(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
-
- if (tegra_dma_is_empty(ch))
- return;
-
- req = list_entry(ch->list.next, typeof(*req), node);
-
- tegra_dma_dequeue_req(ch, req);
- return;
-}
-
-static void tegra_dma_stop(struct tegra_dma_channel *ch)
-{
- u32 csr;
- u32 status;
-
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_IE_EOC;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- csr &= ~CSR_ENB;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- if (status & STA_ISE_EOC)
- writel(status, ch->addr + APB_DMA_CHAN_STA);
-}
-
-static int tegra_dma_cancel(struct tegra_dma_channel *ch)
-{
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- while (!list_empty(&ch->list))
- list_del(ch->list.next);
-
- tegra_dma_stop(ch);
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return 0;
-}
-
-static unsigned int get_channel_status(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req, bool is_stop_dma)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- unsigned int status;
-
- if (is_stop_dma) {
- /*
- * STOP the DMA and get the transfer count.
- * Getting the transfer count is tricky.
- * - Globally disable DMA on all channels
- * - Read the channel's status register to know the number
- * of pending bytes to be transfered.
- * - Stop the dma channel
- * - Globally re-enable DMA to resume other transfers
- */
- spin_lock(&enable_lock);
- writel(0, addr + APB_DMA_GEN);
- udelay(20);
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- tegra_dma_stop(ch);
- writel(GEN_ENABLE, addr + APB_DMA_GEN);
- spin_unlock(&enable_lock);
- if (status & STA_ISE_EOC) {
- pr_err("Got Dma Int here clearing");
- writel(status, ch->addr + APB_DMA_CHAN_STA);
- }
- req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
- } else {
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- }
- return status;
-}
-
-/* should be called with the channel lock held */
-static unsigned int dma_active_count(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req, unsigned int status)
-{
- unsigned int to_transfer;
- unsigned int req_transfer_count;
- unsigned int bytes_transferred;
-
- to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
- req_transfer_count = ch->req_transfer_count + 1;
- bytes_transferred = req_transfer_count;
- if (status & STA_BUSY)
- bytes_transferred -= to_transfer;
- /*
- * In continuous transfer mode, DMA only tracks the count of the
- * half DMA buffer. So, if the DMA already finished half the DMA
- * then add the half buffer to the completed count.
- */
- if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
- bytes_transferred += req_transfer_count;
- if (status & STA_ISE_EOC)
- bytes_transferred += req_transfer_count;
- }
- bytes_transferred *= 4;
- return bytes_transferred;
-}
-
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *_req)
-{
- unsigned int status;
- struct tegra_dma_req *req = NULL;
- int found = 0;
- unsigned long irq_flags;
- int stop = 0;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
-
- if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
- stop = 1;
-
- list_for_each_entry(req, &ch->list, node) {
- if (req == _req) {
- list_del(&req->node);
- found = 1;
- break;
- }
- }
- if (!found) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return 0;
- }
-
- if (!stop)
- goto skip_stop_dma;
-
- status = get_channel_status(ch, req, true);
- req->bytes_transferred = dma_active_count(ch, req, status);
-
- if (!list_empty(&ch->list)) {
- /* if the list is not empty, queue the next request */
- struct tegra_dma_req *next_req;
- next_req = list_entry(ch->list.next,
- typeof(*next_req), node);
- tegra_dma_update_hw(ch, next_req);
- }
-
-skip_stop_dma:
- req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-
- /* Callback should be called without any lock */
- req->complete(req);
- return 0;
-}
-EXPORT_SYMBOL(tegra_dma_dequeue_req);
-
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch)
-{
- unsigned long irq_flags;
- bool is_empty;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list))
- is_empty = true;
- else
- is_empty = false;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return is_empty;
-}
-EXPORT_SYMBOL(tegra_dma_is_empty);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
- struct tegra_dma_req *_req)
-{
- unsigned long irq_flags;
- struct tegra_dma_req *req;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- list_for_each_entry(req, &ch->list, node) {
- if (req == _req) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return true;
- }
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return false;
-}
-EXPORT_SYMBOL(tegra_dma_is_req_inflight);
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- unsigned long irq_flags;
- struct tegra_dma_req *_req;
- int start_dma = 0;
-
- if (req->size > NV_DMA_MAX_TRASFER_SIZE ||
- req->source_addr & 0x3 || req->dest_addr & 0x3) {
- pr_err("Invalid DMA request for channel %d\n", ch->id);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&ch->lock, irq_flags);
-
- list_for_each_entry(_req, &ch->list, node) {
- if (req == _req) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return -EEXIST;
- }
- }
-
- req->bytes_transferred = 0;
- req->status = 0;
- req->buffer_status = 0;
- if (list_empty(&ch->list))
- start_dma = 1;
-
- list_add_tail(&req->node, &ch->list);
-
- if (start_dma)
- tegra_dma_update_hw(ch, req);
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-
- return 0;
-}
-EXPORT_SYMBOL(tegra_dma_enqueue_req);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
-{
- int channel;
- struct tegra_dma_channel *ch = NULL;
-
- if (!tegra_dma_initialized)
- return NULL;
-
- mutex_lock(&tegra_dma_lock);
-
- /* first channel is the shared channel */
- if (mode & TEGRA_DMA_SHARED) {
- channel = TEGRA_SYSTEM_DMA_CH_MIN;
- } else {
- channel = find_first_zero_bit(channel_usage,
- ARRAY_SIZE(dma_channels));
- if (channel >= ARRAY_SIZE(dma_channels))
- goto out;
- }
- __set_bit(channel, channel_usage);
- ch = &dma_channels[channel];
- ch->mode = mode;
-
-out:
- mutex_unlock(&tegra_dma_lock);
- return ch;
-}
-EXPORT_SYMBOL(tegra_dma_allocate_channel);
-
-void tegra_dma_free_channel(struct tegra_dma_channel *ch)
-{
- if (ch->mode & TEGRA_DMA_SHARED)
- return;
- tegra_dma_cancel(ch);
- mutex_lock(&tegra_dma_lock);
- __clear_bit(ch->id, channel_usage);
- mutex_unlock(&tegra_dma_lock);
-}
-EXPORT_SYMBOL(tegra_dma_free_channel);
-
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- u32 apb_ptr;
- u32 ahb_ptr;
-
- if (req->to_memory) {
- apb_ptr = req->source_addr;
- ahb_ptr = req->dest_addr;
- } else {
- apb_ptr = req->dest_addr;
- ahb_ptr = req->source_addr;
- }
- writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
- writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
- req->status = TEGRA_DMA_REQ_INFLIGHT;
- return;
-}
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req)
-{
- int ahb_addr_wrap;
- int apb_addr_wrap;
- int ahb_bus_width;
- int apb_bus_width;
- int index;
-
- u32 ahb_seq;
- u32 apb_seq;
- u32 ahb_ptr;
- u32 apb_ptr;
- u32 csr;
-
- csr = CSR_IE_EOC | CSR_FLOW;
- ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1;
- apb_seq = 0;
-
- csr |= req->req_sel << CSR_REQ_SEL_SHIFT;
-
- /* One shot mode is always single buffered,
- * continuous mode is always double buffered
- * */
- if (ch->mode & TEGRA_DMA_MODE_ONESHOT) {
- csr |= CSR_ONCE;
- ch->req_transfer_count = (req->size >> 2) - 1;
- } else {
- ahb_seq |= AHB_SEQ_DBL_BUF;
-
- /* In double buffered mode, we set the size to half the
- * requested size and interrupt when half the buffer
- * is full */
- ch->req_transfer_count = (req->size >> 3) - 1;
- }
-
- csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT;
-
- if (req->to_memory) {
- apb_ptr = req->source_addr;
- ahb_ptr = req->dest_addr;
-
- apb_addr_wrap = req->source_wrap;
- ahb_addr_wrap = req->dest_wrap;
- apb_bus_width = req->source_bus_width;
- ahb_bus_width = req->dest_bus_width;
-
- } else {
- csr |= CSR_DIR;
- apb_ptr = req->dest_addr;
- ahb_ptr = req->source_addr;
-
- apb_addr_wrap = req->dest_wrap;
- ahb_addr_wrap = req->source_wrap;
- apb_bus_width = req->dest_bus_width;
- ahb_bus_width = req->source_bus_width;
- }
-
- apb_addr_wrap >>= 2;
- ahb_addr_wrap >>= 2;
-
- /* set address wrap for APB size */
- index = 0;
- do {
- if (apb_addr_wrap_table[index] == apb_addr_wrap)
- break;
- index++;
- } while (index < ARRAY_SIZE(apb_addr_wrap_table));
- BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table));
- apb_seq |= index << APB_SEQ_WRAP_SHIFT;
-
- /* set address wrap for AHB size */
- index = 0;
- do {
- if (ahb_addr_wrap_table[index] == ahb_addr_wrap)
- break;
- index++;
- } while (index < ARRAY_SIZE(ahb_addr_wrap_table));
- BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table));
- ahb_seq |= index << AHB_SEQ_WRAP_SHIFT;
-
- for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
- if (bus_width_table[index] == ahb_bus_width)
- break;
- }
- BUG_ON(index == ARRAY_SIZE(bus_width_table));
- ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT;
-
- for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
- if (bus_width_table[index] == apb_bus_width)
- break;
- }
- BUG_ON(index == ARRAY_SIZE(bus_width_table));
- apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT;
-
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
- writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ);
- writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
- writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ);
- writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
- csr |= CSR_ENB;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
- req->status = TEGRA_DMA_REQ_INFLIGHT;
-}
-
-static void handle_oneshot_dma(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
-
- req = list_entry(ch->list.next, typeof(*req), node);
- if (req) {
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 2;
-
- list_del(&req->node);
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
-
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- /* Callback should be called without any lock */
- pr_debug("%s: transferred %d bytes\n", __func__,
- req->bytes_transferred);
- req->complete(req);
- spin_lock_irqsave(&ch->lock, irq_flags);
- }
-
- if (!list_empty(&ch->list)) {
- req = list_entry(ch->list.next, typeof(*req), node);
- /* the complete function we just called may have enqueued
- another req, in which case dma has already started */
- if (req->status != TEGRA_DMA_REQ_INFLIGHT)
- tegra_dma_update_hw(ch, req);
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static void handle_continuous_dma(struct tegra_dma_channel *ch)
-{
- struct tegra_dma_req *req;
- unsigned long irq_flags;
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- if (list_empty(&ch->list)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
-
- req = list_entry(ch->list.next, typeof(*req), node);
- if (req) {
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) {
- bool is_dma_ping_complete;
- is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA)
- & STA_PING_PONG) ? true : false;
- if (req->to_memory)
- is_dma_ping_complete = !is_dma_ping_complete;
- /* Out of sync - Release current buffer */
- if (!is_dma_ping_complete) {
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 3;
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- tegra_dma_stop(ch);
-
- if (!list_is_last(&req->node, &ch->list)) {
- struct tegra_dma_req *next_req;
-
- next_req = list_entry(req->node.next,
- typeof(*next_req), node);
- tegra_dma_update_hw(ch, next_req);
- }
-
- list_del(&req->node);
-
- /* DMA lock is NOT held when callbak is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- req->complete(req);
- return;
- }
- /* Load the next request into the hardware, if available
- * */
- if (!list_is_last(&req->node, &ch->list)) {
- struct tegra_dma_req *next_req;
-
- next_req = list_entry(req->node.next,
- typeof(*next_req), node);
- tegra_dma_update_hw_partial(ch, next_req);
- }
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- /* DMA lock is NOT held when callback is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- if (likely(req->threshold))
- req->threshold(req);
- return;
-
- } else if (req->buffer_status ==
- TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) {
- /* Callback when the buffer is completely full (i.e on
- * the second interrupt */
- int bytes_transferred;
-
- bytes_transferred = ch->req_transfer_count;
- bytes_transferred += 1;
- bytes_transferred <<= 3;
-
- req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
- req->bytes_transferred = bytes_transferred;
- req->status = TEGRA_DMA_REQ_SUCCESS;
- list_del(&req->node);
-
- /* DMA lock is NOT held when callbak is called */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- req->complete(req);
- return;
-
- } else {
- BUG();
- }
- }
- spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static irqreturn_t dma_isr(int irq, void *data)
-{
- struct tegra_dma_channel *ch = data;
- unsigned long status;
-
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- if (status & STA_ISE_EOC)
- writel(status, ch->addr + APB_DMA_CHAN_STA);
- else {
- pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id);
- return IRQ_HANDLED;
- }
- return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t dma_thread_fn(int irq, void *data)
-{
- struct tegra_dma_channel *ch = data;
-
- if (ch->mode & TEGRA_DMA_MODE_ONESHOT)
- handle_oneshot_dma(ch);
- else
- handle_continuous_dma(ch);
-
-
- return IRQ_HANDLED;
-}
-
-int __init tegra_dma_init(void)
-{
- int ret = 0;
- int i;
- unsigned int irq;
- void __iomem *addr;
- struct clk *c;
-
- bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS);
-
- c = clk_get_sys("tegra-apbdma", NULL);
- if (IS_ERR(c)) {
- pr_err("Unable to get clock for APB DMA\n");
- ret = PTR_ERR(c);
- goto fail;
- }
- ret = clk_prepare_enable(c);
- if (ret != 0) {
- pr_err("Unable to enable clock for APB DMA\n");
- goto fail;
- }
-
- addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- writel(GEN_ENABLE, addr + APB_DMA_GEN);
- writel(0, addr + APB_DMA_CNTRL);
- writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX),
- addr + APB_DMA_IRQ_MASK_SET);
-
- for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
- struct tegra_dma_channel *ch = &dma_channels[i];
-
- ch->id = i;
- snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i);
-
- ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- spin_lock_init(&ch->lock);
- INIT_LIST_HEAD(&ch->list);
-
- irq = INT_APB_DMA_CH0 + i;
- ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0,
- dma_channels[i].name, ch);
- if (ret) {
- pr_err("Failed to register IRQ %d for DMA %d\n",
- irq, i);
- goto fail;
- }
- ch->irq = irq;
-
- __clear_bit(i, channel_usage);
- }
- /* mark the shared channel allocated */
- __set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage);
-
- tegra_dma_initialized = true;
-
- return 0;
-fail:
- writel(0, addr + APB_DMA_GEN);
- for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
- struct tegra_dma_channel *ch = &dma_channels[i];
- if (ch->irq)
- free_irq(ch->irq, ch);
- }
- return ret;
-}
-postcore_initcall(tegra_dma_init);
-
-#ifdef CONFIG_PM
-static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3];
-
-void tegra_dma_suspend(void)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- u32 *ctx = apb_dma;
- int i;
-
- *ctx++ = readl(addr + APB_DMA_GEN);
- *ctx++ = readl(addr + APB_DMA_CNTRL);
- *ctx++ = readl(addr + APB_DMA_IRQ_MASK);
-
- for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
- addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- *ctx++ = readl(addr + APB_DMA_CHAN_CSR);
- *ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR);
- *ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ);
- *ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR);
- *ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ);
- }
-}
-
-void tegra_dma_resume(void)
-{
- void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
- u32 *ctx = apb_dma;
- int i;
-
- writel(*ctx++, addr + APB_DMA_GEN);
- writel(*ctx++, addr + APB_DMA_CNTRL);
- writel(*ctx++, addr + APB_DMA_IRQ_MASK);
-
- for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
- addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
- TEGRA_APB_DMA_CH0_SIZE * i);
-
- writel(*ctx++, addr + APB_DMA_CHAN_CSR);
- writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR);
- writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ);
- writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR);
- writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ);
- }
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index f946d12..0b7db17 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -93,9 +93,9 @@
{
u32 id;
- u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+ u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
reg |= 1 << 28;
- writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+ writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
reg = tegra_fuse_readl(FUSE_SKU_INFO);
tegra_sku_id = reg & 0xFF;
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 9077092..3081cc6 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -51,101 +51,4 @@
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
-enum tegra_dma_mode {
- TEGRA_DMA_SHARED = 1,
- TEGRA_DMA_MODE_CONTINOUS = 2,
- TEGRA_DMA_MODE_ONESHOT = 4,
-};
-
-enum tegra_dma_req_error {
- TEGRA_DMA_REQ_SUCCESS = 0,
- TEGRA_DMA_REQ_ERROR_ABORTED,
- TEGRA_DMA_REQ_INFLIGHT,
-};
-
-enum tegra_dma_req_buff_status {
- TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0,
- TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL,
- TEGRA_DMA_REQ_BUF_STATUS_FULL,
-};
-
-struct tegra_dma_req {
- struct list_head node;
- unsigned int modid;
- int instance;
-
- /* Called when the req is complete and from the DMA ISR context.
- * When this is called the req structure is no longer queued by
- * the DMA channel.
- *
- * State of the DMA depends on the number of req it has. If there are
- * no DMA requests queued up, then it will STOP the DMA. It there are
- * more requests in the DMA, then it will queue the next request.
- */
- void (*complete)(struct tegra_dma_req *req);
-
- /* This is a called from the DMA ISR context when the DMA is still in
- * progress and is actively filling same buffer.
- *
- * In case of continuous mode receive, this threshold is 1/2 the buffer
- * size. In other cases, this will not even be called as there is no
- * hardware support for it.
- *
- * In the case of continuous mode receive, if there is next req already
- * queued, DMA programs the HW to use that req when this req is
- * completed. If there is no "next req" queued, then DMA ISR doesn't do
- * anything before calling this callback.
- *
- * This is mainly used by the cases, where the clients has queued
- * only one req and want to get some sort of DMA threshold
- * callback to program the next buffer.
- *
- */
- void (*threshold)(struct tegra_dma_req *req);
-
- /* 1 to copy to memory.
- * 0 to copy from the memory to device FIFO */
- int to_memory;
-
- void *virt_addr;
-
- unsigned long source_addr;
- unsigned long dest_addr;
- unsigned long dest_wrap;
- unsigned long source_wrap;
- unsigned long source_bus_width;
- unsigned long dest_bus_width;
- unsigned long req_sel;
- unsigned int size;
-
- /* Updated by the DMA driver on the conpletion of the request. */
- int bytes_transferred;
- int status;
-
- /* DMA completion tracking information */
- int buffer_status;
-
- /* Client specific data */
- void *dev;
-};
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-void tegra_dma_dequeue(struct tegra_dma_channel *ch);
-void tegra_dma_flush(struct tegra_dma_channel *ch);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
- struct tegra_dma_req *req);
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode);
-void tegra_dma_free_channel(struct tegra_dma_channel *ch);
-
-int __init tegra_dma_init(void);
-
#endif
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
deleted file mode 100644
index fe700f9..0000000
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/io.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IO_H
-#define __MACH_TEGRA_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-#ifndef __ASSEMBLER__
-
-#ifdef CONFIG_TEGRA_PCI
-extern void __iomem *tegra_pcie_io_base;
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT);
-}
-#else
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-#endif
-
-#define __io(a) __io(a)
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index 7e76da7..fee3a94 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -303,6 +303,9 @@
#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
+#define TEGRA_PCIE_BASE 0x80000000
+#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M)
+
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index d3ad515..3463fb5 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -171,8 +171,6 @@
* 0x90000000 - 0x9fffffff - non-prefetchable memory
* 0xa0000000 - 0xbfffffff - prefetchable memory
*/
-#define TEGRA_PCIE_BASE 0x80000000
-
#define PCIE_REGS_SZ SZ_16K
#define PCIE_CFG_OFF PCIE_REGS_SZ
#define PCIE_CFG_SZ SZ_1M
@@ -180,8 +178,6 @@
#define PCIE_EXT_CFG_SZ SZ_1M
#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-#define MMIO_BASE (TEGRA_PCIE_BASE + SZ_4M)
-#define MMIO_SIZE SZ_64K
#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M)
#define MEM_SIZE_0 SZ_128M
#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0)
@@ -204,10 +200,9 @@
bool link_up;
- char io_space_name[16];
char mem_space_name[16];
char prefetch_space_name[20];
- struct resource res[3];
+ struct resource res[2];
};
struct tegra_pcie_info {
@@ -223,17 +218,7 @@
struct clk *pll_e;
};
-static struct tegra_pcie_info tegra_pcie = {
- .res_mmio = {
- .name = "PCI IO",
- .start = MMIO_BASE,
- .end = MMIO_BASE + MMIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-void __iomem *tegra_pcie_io_base;
-EXPORT_SYMBOL(tegra_pcie_io_base);
+static struct tegra_pcie_info tegra_pcie;
static inline void afi_writel(u32 value, unsigned long offset)
{
@@ -391,24 +376,7 @@
pp = tegra_pcie.port + nr;
pp->root_bus_nr = sys->busnr;
- /*
- * IORESOURCE_IO
- */
- snprintf(pp->io_space_name, sizeof(pp->io_space_name),
- "PCIe %d I/O", pp->index);
- pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
- pp->res[0].name = pp->io_space_name;
- if (pp->index == 0) {
- pp->res[0].start = PCIBIOS_MIN_IO;
- pp->res[0].end = pp->res[0].start + SZ_32K - 1;
- } else {
- pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K;
- pp->res[0].end = IO_SPACE_LIMIT;
- }
- pp->res[0].flags = IORESOURCE_IO;
- if (request_resource(&ioport_resource, &pp->res[0]))
- panic("Request PCIe IO resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
+ pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
/*
* IORESOURCE_MEM
@@ -416,18 +384,18 @@
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
- pp->res[1].name = pp->mem_space_name;
+ pp->res[0].name = pp->mem_space_name;
if (pp->index == 0) {
- pp->res[1].start = MEM_BASE_0;
- pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1;
+ pp->res[0].start = MEM_BASE_0;
+ pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
} else {
- pp->res[1].start = MEM_BASE_1;
- pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1;
+ pp->res[0].start = MEM_BASE_1;
+ pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
}
- pp->res[1].flags = IORESOURCE_MEM;
- if (request_resource(&iomem_resource, &pp->res[1]))
+ pp->res[0].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[0]))
panic("Request PCIe Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
/*
* IORESOURCE_MEM | IORESOURCE_PREFETCH
@@ -435,18 +403,18 @@
snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
"PCIe %d PREFETCH MEM", pp->index);
pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
- pp->res[2].name = pp->prefetch_space_name;
+ pp->res[1].name = pp->prefetch_space_name;
if (pp->index == 0) {
- pp->res[2].start = PREFETCH_MEM_BASE_0;
- pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1;
+ pp->res[1].start = PREFETCH_MEM_BASE_0;
+ pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
} else {
- pp->res[2].start = PREFETCH_MEM_BASE_1;
- pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1;
+ pp->res[1].start = PREFETCH_MEM_BASE_1;
+ pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
}
- pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- if (request_resource(&iomem_resource, &pp->res[2]))
+ pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe Prefetch Memory resource failed\n");
- pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
return 1;
}
@@ -541,8 +509,8 @@
/* Bar 2: downstream IO bar */
fpci_bar = ((__u32)0xfdfc << 16);
- size = MMIO_SIZE;
- axi_address = MMIO_BASE;
+ size = SZ_128K;
+ axi_address = TEGRA_PCIE_IO_BASE;
afi_writel(axi_address, AFI_AXI_BAR2_START);
afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
afi_writel(fpci_bar, AFI_FPCI_BAR2);
@@ -776,7 +744,6 @@
static int __init tegra_pcie_get_resources(void)
{
- struct resource *res_mmio = &tegra_pcie.res_mmio;
int err;
err = tegra_pcie_clocks_get();
@@ -798,34 +765,16 @@
goto err_map_reg;
}
- err = request_resource(&iomem_resource, res_mmio);
- if (err) {
- pr_err("PCIE: Failed to request resources: %d\n", err);
- goto err_req_io;
- }
-
- tegra_pcie_io_base = ioremap_nocache(res_mmio->start,
- resource_size(res_mmio));
- if (tegra_pcie_io_base == NULL) {
- pr_err("PCIE: Failed to map IO\n");
- err = -ENOMEM;
- goto err_map_io;
- }
-
err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
IRQF_SHARED, "PCIE", &tegra_pcie);
if (err) {
pr_err("PCIE: Failed to register IRQ: %d\n", err);
- goto err_irq;
+ goto err_req_io;
}
set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
return 0;
-err_irq:
- iounmap(tegra_pcie_io_base);
-err_map_io:
- release_resource(&tegra_pcie.res_mmio);
err_req_io:
iounmap(tegra_pcie.regs);
err_map_reg:
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 54d8f34..f7e12ed 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,6 +1,6 @@
if ARCH_U300
-menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+menu "ST-Ericsson AB U300/U335 Platform"
comment "ST-Ericsson Mobile Platform Products"
@@ -10,46 +10,7 @@
select PINCTRL_U300
select PINCTRL_COH901
-comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
-
-choice
- prompt "U300/U330/U335/U365 system type"
- default MACH_U300_BS2X
- ---help---
- You need to select the target system, i.e. the
- U300/U330/U335/U365 board that you want to compile your kernel
- for.
-
-config MACH_U300_BS2X
- bool "S26/S26/B25/B26 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S26/S25 test products. (Also works on
- B26/B25 big boards.)
-
-config MACH_U300_BS330
- bool "S330/B330 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S330/B330 test products.
-
-config MACH_U300_BS335
- bool "S335/B335 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S335/B335 test products.
-
-config MACH_U300_BS365
- bool "S365/B365 Test Products"
- depends on MACH_U300
- help
- Select this if you're developing on the
- S365/B365 test products.
-
-endchoice
+comment "ST-Ericsson U300/U335 Feature Selections"
config U300_DEBUG
bool "Debug support for U300"
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 7e47d37..5a86c58 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -7,7 +7,6 @@
obj-n :=
obj- :=
-obj-$(CONFIG_ARCH_U300) += u300.o
obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_I2C_STU300) += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 03acf18..ef6f602 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/core.c
*
*
- * Copyright (C) 2007-2010 ST-Ericsson SA
+ * Copyright (C) 2007-2012 ST-Ericsson SA
* License terms: GNU General Public License (GPL) version 2
* Core platform support, IRQ handling and device definitions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -31,23 +31,26 @@
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware/vic.h>
#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
#include <mach/coh901318.h>
#include <mach/hardware.h>
#include <mach/syscon.h>
-#include <mach/dma_channels.h>
-#include <mach/gpio-u300.h>
+#include <mach/irqs.h>
+#include "timer.h"
#include "spi.h"
#include "i2c.h"
#include "u300-gpio.h"
+#include "dma_channels.h"
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
@@ -76,7 +79,7 @@
},
};
-void __init u300_map_io(void)
+static void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
/* We enable a real big DMA buffer if need be. */
@@ -101,7 +104,6 @@
{ IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
-#ifdef CONFIG_MACH_U300_BS335
static struct amba_pl011_data uart1_plat_data = {
#ifdef CONFIG_COH901318
.dma_filter = coh901318_filter_id,
@@ -113,7 +115,6 @@
/* Fast device at 0x7000 offset */
static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
{ IRQ_U300_UART1 }, &uart1_plat_data);
-#endif
/* AHB device at 0x4000 offset */
static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
@@ -152,9 +153,7 @@
*/
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
-#ifdef CONFIG_MACH_U300_BS335
&uart1_device,
-#endif
&pl022_device,
&pl172_device,
&mmcsd_device,
@@ -188,7 +187,6 @@
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
@@ -201,8 +199,6 @@
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
-#endif
-#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
.start = IRQ_U300_GPIO_PORT5,
@@ -215,7 +211,6 @@
.end = IRQ_U300_GPIO_PORT6,
.flags = IORESOURCE_IRQ,
},
-#endif /* CONFIG_MACH_U300_BS335 */
};
static struct resource keypad_resources[] = {
@@ -323,7 +318,6 @@
}
};
-#ifdef CONFIG_MACH_U300_BS335
/* points out all dma slave channels.
* Syntax is [A1, B1, A2, B2, .... ,-1,-1]
* Select all channels from A to B, end of list is marked with -1,-1
@@ -336,14 +330,6 @@
static int dma_memcpy_channels[] = {
U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
-#else /* CONFIG_MACH_U300_BS335 */
-
-static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
-static int dma_memcpy_channels[] = {
- U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
-
-#endif
-
/** register dma for memory access
*
* active 1 means dma intends to access memory
@@ -1395,7 +1381,6 @@
.param.ctrl_lli = flags_memcpy_lli,
.param.ctrl_lli_last = flags_memcpy_lli_last,
},
-#ifdef CONFIG_MACH_U300_BS335
{
.number = U300_DMA_UART1_TX,
.name = "UART1 TX",
@@ -1406,28 +1391,6 @@
.name = "UART1 RX",
.priority_high = 0,
}
-#else
- {
- .number = U300_DMA_GENERAL_PURPOSE_9,
- .name = "GENERAL 09",
- .priority_high = 0,
-
- .param.config = flags_memcpy_config,
- .param.ctrl_lli_chained = flags_memcpy_lli_chained,
- .param.ctrl_lli = flags_memcpy_lli,
- .param.ctrl_lli_last = flags_memcpy_lli_last,
- },
- {
- .number = U300_DMA_GENERAL_PURPOSE_10,
- .name = "GENERAL 10",
- .priority_high = 0,
-
- .param.config = flags_memcpy_config,
- .param.ctrl_lli_chained = flags_memcpy_lli_chained,
- .param.ctrl_lli = flags_memcpy_lli,
- .param.ctrl_lli_last = flags_memcpy_lli_last,
- }
-#endif
};
@@ -1480,18 +1443,7 @@
* GPIO block, with different number of ports.
*/
static struct u300_gpio_platform u300_gpio_plat = {
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
- .variant = U300_GPIO_COH901335,
- .ports = 3,
-#endif
-#ifdef CONFIG_MACH_U300_BS335
- .variant = U300_GPIO_COH901571_3_BS335,
.ports = 7,
-#endif
-#ifdef CONFIG_MACH_U300_BS365
- .variant = U300_GPIO_COH901571_3_BS365,
- .ports = 5,
-#endif
.gpio_base = 0,
.gpio_irq_base = IRQ_U300_GPIO_BASE,
.pinctrl_device = &pinctrl_device,
@@ -1651,7 +1603,7 @@
* together so some interrupts are connected to the first one and some
* to the second one.
*/
-void __init u300_init_irq(void)
+static void __init u300_init_irq(void)
{
u32 mask[2] = {0, 0};
struct clk *clk;
@@ -1756,29 +1708,11 @@
printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
"(chip ID 0x%04x)\n", chipname, val);
-#ifdef CONFIG_MACH_U300_BS330
- if ((val & 0xFF00U) != 0xd800) {
- printk(KERN_ERR "Platform configured for BS330 " \
- "with DB3200 but %s detected, expect problems!",
- chipname);
- }
-#endif
-#ifdef CONFIG_MACH_U300_BS335
if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
printk(KERN_ERR "Platform configured for BS335 " \
" with DB3350 but %s detected, expect problems!",
chipname);
}
-#endif
-#ifdef CONFIG_MACH_U300_BS365
- if ((val & 0xFF00U) != 0xe800) {
- printk(KERN_ERR "Platform configured for BS365 " \
- "with DB3210 but %s detected, expect problems!",
- chipname);
- }
-#endif
-
-
}
/*
@@ -1811,7 +1745,7 @@
}
}
-void __init u300_init_devices(void)
+static void __init u300_init_machine(void)
{
int i;
u16 val;
@@ -1852,7 +1786,7 @@
/* Forward declare this function from the watchdog */
void coh901327_watchdog_reset(void);
-void u300_restart(char mode, const char *cmd)
+static void u300_restart(char mode, const char *cmd)
{
switch (mode) {
case 's':
@@ -1868,3 +1802,15 @@
/* Wait for system do die/reset. */
while (1);
}
+
+MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
+ /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+ .atag_offset = 0x100,
+ .map_io = u300_map_io,
+ .nr_irqs = NR_IRQS_U300,
+ .init_irq = u300_init_irq,
+ .handle_irq = vic_handle_irq,
+ .timer = &u300_timer,
+ .init_machine = u300_init_machine,
+ .restart = u300_restart,
+MACHINE_END
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/dma_channels.h
similarity index 88%
rename from arch/arm/mach-u300/include/mach/dma_channels.h
rename to arch/arm/mach-u300/dma_channels.h
index b239149b..4e8a88f 100644
--- a/arch/arm/mach-u300/include/mach/dma_channels.h
+++ b/arch/arm/mach-u300/dma_channels.h
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/include/mach/dma_channels.h
*
*
- * Copyright (C) 2007-2009 ST-Ericsson
+ * Copyright (C) 2007-2012 ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
* Map file for the U300 dma driver.
* Author: Per Friden <per.friden@stericsson.com>
@@ -50,19 +50,10 @@
#define U300_DMA_GENERAL_PURPOSE_6 35
#define U300_DMA_GENERAL_PURPOSE_7 36
#define U300_DMA_GENERAL_PURPOSE_8 37
-#ifdef CONFIG_MACH_U300_BS335
#define U300_DMA_UART1_TX 38
#define U300_DMA_UART1_RX 39
-#else
-#define U300_DMA_GENERAL_PURPOSE_9 38
-#define U300_DMA_GENERAL_PURPOSE_10 39
-#endif
-#ifdef CONFIG_MACH_U300_BS335
#define U300_DMA_DEVICE_CHANNELS 32
-#else
-#define U300_DMA_DEVICE_CHANNELS 30
-#endif
#define U300_DMA_CHANNELS 40
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index cb04bd6..0d4620e 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -1,7 +1,7 @@
/*
* arch/arm/mach-u300/i2c.c
*
- * Copyright (C) 2009 ST-Ericsson AB
+ * Copyright (C) 2009-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
*
* Register board i2c devices
@@ -261,7 +261,6 @@
};
static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
-#ifdef CONFIG_MACH_U300_BS335
{
.type = "fwcam",
.addr = 0x10,
@@ -270,9 +269,6 @@
.type = "fwcam",
.addr = 0x5d,
},
-#else
- { },
-#endif
};
void __init u300_i2c_register_board_devices(void)
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
deleted file mode 100644
index 92e3cc8..0000000
--- a/arch/arm/mach-u300/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ec09c1e..e27425a 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/include/mach/irqs.h
*
*
- * Copyright (C) 2006-2009 ST-Ericsson AB
+ * Copyright (C) 2006-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* IRQ channel definitions for the U300 platforms.
* Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -31,10 +31,6 @@
#define IRQ_U300_XGAM_GAMCON 14
#define IRQ_U300_XGAM_CDI 15
#define IRQ_U300_XGAM_CDICON 16
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC 17
-#endif
#define IRQ_U300_XGAM_PDI 18
#define IRQ_U300_XGAM_PDICON 19
#define IRQ_U300_XGAM_GAMEACC 20
@@ -55,8 +51,6 @@
#define IRQ_U300_GPIO_PORT1 34
#define IRQ_U300_GPIO_PORT2 35
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
- defined(CONFIG_MACH_U300_BS335)
/* These are for DB3150, DB3200 and DB3350 */
#define IRQ_U300_WDOG 36
#define IRQ_U300_EVHIST 37
@@ -68,15 +62,8 @@
#define IRQ_U300_RTC 43
#define IRQ_U300_NFIF 44
#define IRQ_U300_NFIF2 45
-#endif
-
-/* DB3150 and DB3200 have only 45 IRQs */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END 46
-#endif
/* The DB3350-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS335
#define IRQ_U300_ISP_F0 46
#define IRQ_U300_ISP_F1 47
#define IRQ_U300_ISP_F2 48
@@ -89,25 +76,6 @@
#define IRQ_U300_GPIO_PORT5 55
#define IRQ_U300_GPIO_PORT6 56
#define U300_VIC_IRQS_END 57
-#endif
-
-/* The DB3210-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3 36
-#define IRQ_U300_GPIO_PORT4 37
-#define IRQ_U300_WDOG 38
-#define IRQ_U300_EVHIST 39
-#define IRQ_U300_MSPRO 40
-#define IRQ_U300_MMCSD_MCIINTR0 41
-#define IRQ_U300_MMCSD_MCIINTR1 42
-#define IRQ_U300_I2C0 43
-#define IRQ_U300_I2C1 44
-#define IRQ_U300_RTC 45
-#define IRQ_U300_NFIF 46
-#define IRQ_U300_NFIF2 47
-#define IRQ_U300_SYSCON_PLL_LOCK 48
-#define U300_VIC_IRQS_END 49
-#endif
/* Maximum 8*7 GPIO lines */
#ifdef CONFIG_PINCTRL_COH901
@@ -117,6 +85,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
-#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
+#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
deleted file mode 100644
index 096333f..0000000
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/platform.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic platform init and mapping functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __ASSEMBLY__
-
-void u300_map_io(void);
-void u300_init_irq(void);
-void u300_init_devices(void);
-void u300_restart(char, const char *);
-extern struct sys_timer u300_timer;
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 6e84f07..10bdd0b 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -3,7 +3,7 @@
* arch/arm/mach-u300/include/mach/syscon.h
*
*
- * Copyright (C) 2008 ST-Ericsson AB
+ * Copyright (C) 2008-2012 ST-Ericsson AB
*
* Author: Rickard Andersson <rickard.andersson@stericsson.com>
*/
@@ -36,9 +36,7 @@
#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
/* Reset lines for SLOW devices 16bit (R/W) */
#define U300_SYSCON_RSR (0x0014)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
-#endif
#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
@@ -50,9 +48,7 @@
#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
/* Reset lines for FAST devices 16bit (R/W) */
#define U300_SYSCON_RFR (0x0018)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
-#endif
#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
@@ -62,10 +58,8 @@
#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
/* Reset lines for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_RRR (0x001c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
-#endif
#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
@@ -79,9 +73,7 @@
#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
/* Clock enable for SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CESR (0x0020)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
-#endif
#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
@@ -92,24 +84,20 @@
#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
/* Clock enable for FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CEFR (0x0024)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
-#endif
#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
/* Clock enable for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CERR (0x0028)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
-#endif
#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
@@ -124,9 +112,7 @@
#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
/* Single block clock enable 16bit (-/W) */
#define U300_SYSCON_SBCER (0x002c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
-#endif
#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
@@ -135,9 +121,7 @@
#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
-#endif
#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
@@ -147,10 +131,8 @@
#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
-#endif
#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
@@ -168,9 +150,7 @@
/* Same values as above for SBCER */
/* Clock force SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CFSR (0x003c)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
-#endif
#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
@@ -184,10 +164,8 @@
/* Values not defined. Define if you want to use them. */
/* Clock force the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CFRR (0x44)
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
-#endif
#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 65f87c5..1e49d90 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -28,7 +28,6 @@
#define PLAT_NAND_CLE (1 << 16)
#define PLAT_NAND_ALE (1 << 17)
-
/* AHB Peripherals */
#define U300_AHB_PER_PHYS_BASE 0xa0000000
#define U300_AHB_PER_VIRT_BASE 0xff010000
@@ -46,11 +45,7 @@
#define U300_BOOTROM_VIRT_BASE 0xffff0000
/* SEMI config base */
-#ifdef CONFIG_MACH_U300_BS335
#define U300_SEMI_CONFIG_BASE 0x2FFE0000
-#else
-#define U300_SEMI_CONFIG_BASE 0x30000000
-#endif
/*
* AHB peripherals
@@ -99,10 +94,8 @@
/* SPI controller */
#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
-#ifdef CONFIG_MACH_U300_BS335
/* Fast UART1 on U335 only */
#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
-#endif
/*
* SLOW peripherals
@@ -151,10 +144,8 @@
* REST peripherals
*/
-/* ISP (image signal processor) is only available in U335 */
-#ifdef CONFIG_MACH_U300_BS335
+/* ISP (image signal processor) */
#define U300_ISP_BASE (0xA0008000)
-#endif
/* DMA Controller base */
#define U300_DMAC_BASE (0xC0020000)
@@ -166,17 +157,9 @@
#define U300_APEX_BASE (0xc0030000)
/* Video Encoder Base */
-#ifdef CONFIG_MACH_U300_BS335
#define U300_VIDEOENC_BASE (0xc0080000)
-#else
-#define U300_VIDEOENC_BASE (0xc0040000)
-#endif
/* XGAM Base */
#define U300_XGAM_BASE (0xd0000000)
-/*
- * Virtual accessor macros for static devices
- */
-
#endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index a1affac..02e6659 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -12,7 +12,7 @@
#include <linux/amba/pl022.h>
#include <linux/err.h>
#include <mach/coh901318.h>
-#include <mach/dma_channels.h>
+#include "dma_channels.h"
/*
* The following is for the actual devices on the SSP/SPI bus
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 56ac06d..1da10e2 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -17,14 +17,17 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
/* Generic stuff */
#include <asm/sched_clock.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
+
+#include "timer.h"
/*
* APP side special timer registers
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
new file mode 100644
index 0000000..b5e9791
--- /dev/null
+++ b/arch/arm/mach-u300/timer.h
@@ -0,0 +1 @@
+extern struct sys_timer u300_timer;
diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h
index 847dc25..83f5077 100644
--- a/arch/arm/mach-u300/u300-gpio.h
+++ b/arch/arm/mach-u300/u300-gpio.h
@@ -1,50 +1,11 @@
/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
+ * Individual pin assignments for the B335/S335.
* Notice that the actual usage of these pins depends on the
* PAD MUX settings, that is why the same number can potentially
* appear several times. In the reference design each pin is only
* used for one purpose. These were determined by inspecting the
* S365 schematic.
*/
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
#define U300_GPIO_PIN_UART_RX 0
#define U300_GPIO_PIN_UART_TX 1
#define U300_GPIO_PIN_UART_CTS 2
@@ -90,8 +51,6 @@
#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-#ifdef CONFIG_MACH_U300_BS335
-
#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
@@ -109,6 +68,3 @@
#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
deleted file mode 100644
index f30c69d..0000000
--- a/arch/arm/mach-u300/u300.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/u300.c
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform machine definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/memblock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-
-static void __init u300_init_machine(void)
-{
- u300_init_devices();
-}
-
-#ifdef CONFIG_MACH_U300_BS2X
-#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS330
-#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
-#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
-#endif
-
-MACHINE_START(U300, MACH_U300_STRING)
- /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .atag_offset = 0x100,
- .map_io = u300_map_io,
- .init_irq = u300_init_irq,
- .handle_irq = vic_handle_irq,
- .timer = &u300_timer,
- .init_machine = u300_init_machine,
- .restart = u300_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 53d3d46..a258996 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@
select CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
+ select COMMON_CLK
config UX500_SOC_DB8500
bool
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 026086f..5691ef6 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o cpu.o devices.o devices-common.o \
+obj-y := cpu.o devices.o devices-common.o \
id.o usb.o timer.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index bc5a516..0000000
--- a/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h> /* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN 0x00
-#define PRCC_PCKDIS 0x04
-#define PRCC_KCKEN 0x08
-#define PRCC_KCKDIS 0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET 0x510
-#define PRCM_YYCLKEN1_MGT_SET 0x514
-#define PRCM_YYCLKEN0_MGT_CLR 0x518
-#define PRCM_YYCLKEN1_MGT_CLR 0x51C
-#define PRCM_YYCLKEN0_MGT_VAL 0x520
-#define PRCM_YYCLKEN1_MGT_VAL 0x524
-
-#define PRCM_SVAMMDSPCLK_MGT 0x008
-#define PRCM_SIAMMDSPCLK_MGT 0x00C
-#define PRCM_SGACLK_MGT 0x014
-#define PRCM_UARTCLK_MGT 0x018
-#define PRCM_MSP02CLK_MGT 0x01C
-#define PRCM_MSP1CLK_MGT 0x288
-#define PRCM_I2CCLK_MGT 0x020
-#define PRCM_SDMMCCLK_MGT 0x024
-#define PRCM_SLIMCLK_MGT 0x028
-#define PRCM_PER1CLK_MGT 0x02C
-#define PRCM_PER2CLK_MGT 0x030
-#define PRCM_PER3CLK_MGT 0x034
-#define PRCM_PER5CLK_MGT 0x038
-#define PRCM_PER6CLK_MGT 0x03C
-#define PRCM_PER7CLK_MGT 0x040
-#define PRCM_LCDCLK_MGT 0x044
-#define PRCM_BMLCLK_MGT 0x04C
-#define PRCM_HSITXCLK_MGT 0x050
-#define PRCM_HSIRXCLK_MGT 0x054
-#define PRCM_HDMICLK_MGT 0x058
-#define PRCM_APEATCLK_MGT 0x05C
-#define PRCM_APETRACECLK_MGT 0x060
-#define PRCM_MCDECLK_MGT 0x064
-#define PRCM_IPI2CCLK_MGT 0x068
-#define PRCM_DSIALTCLK_MGT 0x06C
-#define PRCM_DMACLK_MGT 0x074
-#define PRCM_B2R2CLK_MGT 0x078
-#define PRCM_TVCLK_MGT 0x07C
-#define PRCM_TCR 0x1C8
-#define PRCM_TCR_STOPPED (1 << 16)
-#define PRCM_TCR_DOZE_MODE (1 << 17)
-#define PRCM_UNIPROCLK_MGT 0x278
-#define PRCM_SSPCLK_MGT 0x280
-#define PRCM_RNGCLK_MGT 0x284
-#define PRCM_UICCCLK_MGT 0x27C
-
-#define PRCM_MGT_ENABLE (1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
- if (clk->enabled++ == 0) {
- if (clk->parent_cluster)
- __clk_enable(clk->parent_cluster);
-
- if (clk->parent_periph)
- __clk_enable(clk->parent_periph);
-
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- }
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
- if (--clk->enabled == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
-
- if (clk->parent_periph)
- __clk_disable(clk->parent_periph);
-
- if (clk->parent_cluster)
- __clk_disable(clk->parent_cluster);
- }
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(!clk->enabled);
-
- spin_lock_irqsave(&clocks_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
- void __iomem *addr;
- u32 tcr;
- int mtu = (int) clk->data;
- /*
- * One of these is selected eventually
- * TODO: Replace the constant with a reference
- * to the ULP source once this is modeled.
- */
- unsigned long clk32k = 32768;
- unsigned long mturate;
- unsigned long retclk;
-
- if (cpu_is_u8500_family() || cpu_is_ux540_family())
- addr = __io_address(U8500_PRCMU_BASE);
- else
- ux500_unknown_soc();
-
- /*
- * On a startup, always conifgure the TCR to the doze mode;
- * bootloaders do it for us. Do this in the kernel too.
- */
- writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
- tcr = readl(addr + PRCM_TCR);
-
- /* Get the rate from the parent as a default */
- if (clk->parent_periph)
- mturate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- mturate = clk_get_rate(clk->parent_cluster);
- else
- /* We need to be connected SOMEWHERE */
- BUG();
-
- /* Return the clock selected for this MTU */
- if (tcr & (1 << mtu))
- retclk = clk32k;
- else
- retclk = mturate;
-
- pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
- return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- /*
- * If there is a custom getrate callback for this clock,
- * it will take precedence.
- */
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- if (clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- rate = clk->rate;
- if (!rate) {
- if (clk->parent_periph)
- rate = clk_get_rate(clk->parent_periph);
- else if (clk->parent_cluster)
- rate = clk_get_rate(clk->parent_cluster);
- }
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- /*TODO*/
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- /*TODO*/
- return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
- void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
- void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
- + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
- writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
- .enable = clk_prcmu_enable,
- .disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
- [1] = U8500_CLKRST1_BASE,
- [2] = U8500_CLKRST2_BASE,
- [3] = U8500_CLKRST3_BASE,
- [5] = U8500_CLKRST5_BASE,
- [6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
- void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
- if (clk->prcc_bus != -1)
- writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
- if (clk->prcc_kernel != -1)
- writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
- .enable = clk_prcc_enable,
- .disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
- .name = "clk_32khz",
- .rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
-static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL);
-static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
- .name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
- CLK(dummy_apb_pclk, NULL, "apb_pclk"),
-
- /* Peripheral Cluster #1 */
- CLK(gpio0, "gpio.0", NULL),
- CLK(gpio0, "gpio.1", NULL),
- CLK(slimbus0, "slimbus0", NULL),
- CLK(i2c2, "nmk-i2c.2", NULL),
- CLK(sdi0, "sdi0", NULL),
- CLK(msp0, "ux500-msp-i2s.0", NULL),
- CLK(i2c1, "nmk-i2c.1", NULL),
- CLK(uart1, "uart1", NULL),
- CLK(uart0, "uart0", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(gpio2, "gpio.2", NULL),
- CLK(gpio2, "gpio.3", NULL),
- CLK(gpio2, "gpio.4", NULL),
- CLK(gpio2, "gpio.5", NULL),
- CLK(sdi5, "sdi5", NULL),
- CLK(uart2, "uart2", NULL),
- CLK(ske, "ske", NULL),
- CLK(ske, "nmk-ske-keypad", NULL),
- CLK(sdi2, "sdi2", NULL),
- CLK(i2c0, "nmk-i2c.0", NULL),
- CLK(fsmc, "fsmc", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(gpio3, "gpio.8", NULL),
-
- /* Peripheral Cluster #6 */
- CLK(hash1, "hash1", NULL),
- CLK(pka, "pka", NULL),
- CLK(hash0, "hash0", NULL),
- CLK(cryp0, "cryp0", NULL),
- CLK(cryp1, "cryp1", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(svaclk, "sva", NULL),
- CLK(siaclk, "sia", NULL),
- CLK(sgaclk, "sga", NULL),
- CLK(slimclk, "slim", NULL),
- CLK(lcdclk, "lcd", NULL),
- CLK(bmlclk, "bml", NULL),
- CLK(hsitxclk, "stm-hsi.0", NULL),
- CLK(hsirxclk, "stm-hsi.1", NULL),
- CLK(hdmiclk, "hdmi", NULL),
- CLK(apeatclk, "apeat", NULL),
- CLK(apetraceclk, "apetrace", NULL),
- CLK(mcdeclk, "mcde", NULL),
- CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40.0", NULL),
- CLK(b2r2clk, "b2r2", NULL),
- CLK(tvclk, "tv", NULL),
-
- /* Peripheral Cluster #1 */
- CLK(i2c4, "nmk-i2c.4", NULL),
- CLK(spi3, "spi3", NULL),
- CLK(msp1, "ux500-msp-i2s.1", NULL),
- CLK(msp3, "ux500-msp-i2s.3", NULL),
-
- /* Peripheral Cluster #2 */
- CLK(gpio1, "gpio.6", NULL),
- CLK(gpio1, "gpio.7", NULL),
- CLK(ssitx, "ssitx", NULL),
- CLK(ssirx, "ssirx", NULL),
- CLK(spi0, "spi0", NULL),
- CLK(sdi3, "sdi3", NULL),
- CLK(sdi1, "sdi1", NULL),
- CLK(msp2, "ux500-msp-i2s.2", NULL),
- CLK(sdi4, "sdi4", NULL),
- CLK(pwl, "pwl", NULL),
- CLK(spi1, "spi1", NULL),
- CLK(spi2, "spi2", NULL),
- CLK(i2c3, "nmk-i2c.3", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(ssp1, "ssp1", NULL),
- CLK(ssp0, "ssp0", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(usb, "musb-ux500.0", "usb"),
-
- /* Peripheral Cluster #6 */
- CLK(mtu1, "mtu1", NULL),
- CLK(mtu0, "mtu0", NULL),
- CLK(cfgreg, "cfgreg", NULL),
- CLK(hash1, "hash1", NULL),
- CLK(unipro, "unipro", NULL),
- CLK(rng, "rng", NULL),
-
- /* PRCMU level clock gating */
-
- /* Bank 0 */
- CLK(uniproclk, "uniproclk", NULL),
- CLK(dsialtclk, "dsialt", NULL),
-
- /* Bank 1 */
- CLK(rngclk, "rng", NULL),
- CLK(uiccclk, "uicc", NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes with
- * powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
- while (num--) {
- /* Check that the clock has not been already registered */
- if (!(cl->clk->list.prev != cl->clk->list.next))
- list_add_tail(&cl->clk->list, &clk_list);
-
- cl++;
- }
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char cusecount[128];
- unsigned int len;
-
- len = sprintf(cusecount, "%u\n", clk->enabled);
- return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
- size_t size, loff_t *off)
-{
- struct clk *clk = file->f_dentry->d_inode->i_private;
- char crate[128];
- unsigned int rate;
- unsigned int len;
-
- rate = clk_get_rate(clk);
- len = sprintf(crate, "%u\n", rate);
- return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
- .read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
- .read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
- struct dentry *p_dentry)
-{
- struct dentry *d, *clk_d;
- const char *p = c->name;
-
- if (!p)
- p = "BUG";
-
- clk_d = debugfs_create_dir(p, p_dentry);
- if (!clk_d)
- return NULL;
-
- d = debugfs_create_file("usecount", S_IRUGO,
- clk_d, c, &usecount_fops);
- if (!d)
- goto err_out;
- d = debugfs_create_file("rate", S_IRUGO,
- clk_d, c, &set_rate_fops);
- if (!d)
- goto err_out;
- /*
- * TODO : not currently available in ux500
- * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
- * if (!d)
- * goto err_out;
- */
-
- return clk_d;
-
-err_out:
- debugfs_remove_recursive(clk_d);
- return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (!(bpa && !pa)) {
- c->dent = clk_debugfs_register_dir(c,
- pa ? pa->dent : clk_debugfs_root);
- if (!c->dent)
- return -ENOMEM;
- }
-
- if (bpa) {
- c->dent_bus = clk_debugfs_register_dir(c,
- bpa->dent_bus ? bpa->dent_bus : bpa->dent);
- if ((!c->dent_bus) && (c->dent)) {
- debugfs_remove_recursive(c->dent);
- c->dent = NULL;
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent_periph;
- struct clk *bpa = c->parent_cluster;
-
- if (pa && (!pa->dent && !pa->dent_bus)) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (bpa && (!bpa->dent && !bpa->dent_bus)) {
- err = clk_debugfs_register(bpa);
- if (err)
- return err;
- }
-
- if ((!c->dent) && (!c->dent_bus)) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clk_list, list) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
- return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
- .get_rate = clk_smp_twd_get_rate,
- .name = "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
- .dev_id = "smp_twd",
- .clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
- unsigned long state, void *data)
-{
- struct cpufreq_freqs *f = data;
-
- if (state == CPUFREQ_PRECHANGE) {
- /* Save frequency in simple Hz */
- clk_smp_twd_rate = (f->new * 1000) / 2;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
- .notifier_call = clk_twd_cpufreq_transition,
-};
-
-int clk_init_smp_twd_cpufreq(void)
-{
- return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#endif
-
-int __init clk_init(void)
-{
- clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
- clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
- return 0;
-}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index 65d27a1..0000000
--- a/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 2010 ST-Ericsson
- * Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable: function to enable the clock
- * @disable: function to disable the clock
- * @get_rate: function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock. All of these functions are optional. If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
- void (*enable) (struct clk *);
- void (*disable) (struct clk *);
- unsigned long (*get_rate) (struct clk *);
- int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops: pointer to clkops struct used to control this clock
- * @name: name, for debugging
- * @enabled: refcount. positive if enabled, zero if disabled
- * @get_rate: custom callback for getting the clock rate
- * @data: custom per-clock data for example for the get_rate
- * callback
- * @rate: fixed rate for clocks which don't implement
- * ops->getrate
- * @prcmu_cg_off: address offset of the combined enable/disable register
- * (used on u8500v1)
- * @prcmu_cg_bit: bit in the combined enable/disable register (used on
- * u8500v1)
- * @prcmu_cg_mgt: address of the enable/disable register (used on
- * u8500ed)
- * @cluster: peripheral cluster number
- * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
- * -1 if no kernel clock exists.
- * @parent_cluster: pointer to parent's cluster clk struct
- * @parent_periph: pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock. Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * (1) the parent cluster (bus) clock at the PRCMU level
- * (2) the parent peripheral clock (if any) at the PRCMU level
- * (3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
- const struct clkops *ops;
- const char *name;
- unsigned int enabled;
- unsigned long (*get_rate)(struct clk *);
- void *data;
-
- unsigned long rate;
- struct list_head list;
-
- /* These three are only for PRCMU clks */
-
- unsigned int prcmu_cg_off;
- unsigned int prcmu_cg_bit;
- unsigned int prcmu_cg_mgt;
-
- /* The rest are only for PRCC clks */
-
- int cluster;
- unsigned int prcc_bus;
- unsigned int prcc_kernel;
-
- struct clk *parent_cluster;
- struct clk *parent_periph;
-#if defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
- struct dentry *dent_bus; /* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcmu_ops, \
- .prcmu_cg_off = _cg_off, \
- .prcmu_cg_bit = _cg_bit, \
- .rate = _rate, \
- .prcmu_cg_mgt = PRCM_##_reg##_MGT \
- }
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk \
- }
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = { \
- .name = #_name, \
- .ops = &clk_prcc_ops, \
- .cluster = _pclust, \
- .prcc_bus = _bus_en, \
- .prcc_kernel = _kernel_en, \
- .parent_cluster = &clk_per##_pclust##clk, \
- .parent_periph = _kernclk, \
- .get_rate = _callback, \
- .data = (void *) _data \
- }
-
-
-#define CLK(_clk, _devname, _conname) \
- { \
- .clk = &clk_##_clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 4b0a9b3..3d62c64 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,7 +8,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
@@ -17,6 +16,7 @@
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -25,8 +25,6 @@
#include <mach/setup.h>
#include <mach/devices.h>
-#include "clock.h"
-
void __iomem *_PRCMU_BASE;
/*
@@ -70,13 +68,17 @@
*/
if (cpu_is_u8500_family())
db8500_prcmu_early_init();
- clk_init();
+
+ if (cpu_is_u8500_family())
+ u8500_clk_init();
+ else if (cpu_is_u9540())
+ u9540_clk_init();
+ else if (cpu_is_u8540())
+ u8540_clk_init();
}
void __init ux500_init_late(void)
{
- clk_debugfs_init();
- clk_init_smp_twd_cpufreq();
}
static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cd8ea35..ca7902c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -169,11 +169,6 @@
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- }, {
- .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = IO_SPACE_LIMIT,
- .type = MT_DEVICE
},
#endif
};
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 408e58d..3e5d425 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,7 +29,6 @@
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
-#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
deleted file mode 100644
index 0406513..0000000
--- a/arch/arm/mach-versatile/include/mach/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/io.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define PCIO_BASE 0xeb000000ul
-
-#define __io(a) ((a) + PCIO_BASE)
-
-#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e95bf84..2f84f40 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,13 +169,6 @@
.write = versatile_write_config,
};
-static struct resource io_port = {
- .name = "PCI",
- .start = 0,
- .end = IO_SPACE_LIMIT,
- .flags = IORESOURCE_IO,
-};
-
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
@@ -207,12 +200,6 @@
"memory region (%d)\n", ret);
goto out;
}
- ret = request_resource(&ioport_resource, &io_port);
- if (ret) {
- printk(KERN_ERR "PCI: unable to allocate I/O "
- "port region (%d)\n", ret);
- goto out;
- }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -227,11 +214,9 @@
}
/*
- * the IO resource for this bus
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
@@ -260,9 +245,11 @@
goto out;
}
+ ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+ if (ret)
+ goto out;
+
if (nr == 0) {
- sys->mem_offset = 0;
- sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
@@ -319,7 +306,6 @@
void __init pci_versatile_preinit(void)
{
- pcibios_min_io = 0x44000000;
pcibios_min_mem = 0x50000000;
__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 23a7643..1be0f4e 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -15,8 +15,11 @@
*/
#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
+#include <asm/cputype.h>
#include <asm/hardware/cache-tauros2.h>
@@ -144,25 +147,8 @@
__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
}
-static void __init disable_l2_prefetch(void)
-{
- u32 u;
-
- /*
- * Read the CPU Extra Features register and verify that the
- * Disable L2 Prefetch bit is set.
- */
- u = read_extra_features();
- if (!(u & 0x01000000)) {
- printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
- write_extra_features(u | 0x01000000);
- }
-}
-
static inline int __init cpuid_scheme(void)
{
- extern int processor_id;
-
return !!((processor_id & 0x000f0000) == 0x000f0000);
}
@@ -189,12 +175,36 @@
__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
}
-void __init tauros2_init(void)
+static void enable_extra_feature(unsigned int features)
{
- extern int processor_id;
- char *mode;
+ u32 u;
- disable_l2_prefetch();
+ u = read_extra_features();
+
+ if (features & CACHE_TAUROS2_PREFETCH_ON)
+ u &= ~0x01000000;
+ else
+ u |= 0x01000000;
+ printk(KERN_INFO "Tauros2: %s L2 prefetch.\n",
+ (features & CACHE_TAUROS2_PREFETCH_ON)
+ ? "Enabling" : "Disabling");
+
+ if (features & CACHE_TAUROS2_LINEFILL_BURST8)
+ u |= 0x00100000;
+ else
+ u &= ~0x00100000;
+ printk(KERN_INFO "Tauros2: %s line fill burt8.\n",
+ (features & CACHE_TAUROS2_LINEFILL_BURST8)
+ ? "Enabling" : "Disabling");
+
+ write_extra_features(u);
+}
+
+static void __init tauros2_internal_init(unsigned int features)
+{
+ char *mode = NULL;
+
+ enable_extra_feature(features);
#ifdef CONFIG_CPU_32v5
if ((processor_id & 0xff0f0000) == 0x56050000) {
@@ -286,3 +296,34 @@
printk(KERN_INFO "Tauros2: L2 cache support initialised "
"in %s mode.\n", mode);
}
+
+#ifdef CONFIG_OF
+static const struct of_device_id tauros2_ids[] __initconst = {
+ { .compatible = "marvell,tauros2-cache"},
+ {}
+};
+#endif
+
+void __init tauros2_init(unsigned int features)
+{
+#ifdef CONFIG_OF
+ struct device_node *node;
+ int ret;
+ unsigned int f;
+
+ node = of_find_matching_node(NULL, tauros2_ids);
+ if (!node) {
+ pr_info("Not found marvell,tauros2-cache, disable it\n");
+ return;
+ }
+
+ ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+ if (ret) {
+ pr_info("Not found marvell,tauros-cache-features property, "
+ "disable extra features\n");
+ features = 0;
+ } else
+ features = f;
+#endif
+ tauros2_internal_init(features);
+}
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 119bc52..4e07eec 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -63,10 +63,11 @@
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
- " bfi %1, %0, #0, %2\n"
- " mcr p15, 0, %1, c13, c0, 1\n"
+ " and %0, %0, %2\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
- : "I" (ASID_BITS));
+ : "I" (~ASID_MASK));
isb();
return NOTIFY_OK;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 051204f..e59c4ab 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -489,7 +489,7 @@
void *pool_start = pool->vaddr;
void *pool_end = pool->vaddr + pool->size;
- if (start < pool_start || start > pool_end)
+ if (start < pool_start || start >= pool_end)
return false;
if (end <= pool_end)
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 566750f..9d869f9 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -36,6 +36,7 @@
#include <asm/system_info.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "mm.h"
int ioremap_page(unsigned long virt, unsigned long phys,
@@ -383,3 +384,16 @@
arch_iounmap(io_addr);
}
EXPORT_SYMBOL(__arm_iounmap);
+
+#ifdef CONFIG_PCI
+int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+{
+ BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+
+ return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
+ PCI_IO_VIRT_BASE + offset + SZ_64K,
+ phys_addr,
+ __pgprot(get_mem_type(MT_DEVICE)->prot_pte));
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_io);
+#endif
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 6776160..a8ee92d 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -55,6 +55,9 @@
/* permanent static mappings from iotable_init() */
#define VM_ARM_STATIC_MAPPING 0x40000000
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING 0x20000000
+
/* mapping type (attributes) for permanent static mappings */
#define VM_ARM_MTYPE(mt) ((mt) << 20)
#define VM_ARM_MTYPE_MASK (0x1f << 20)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4c2d045..18144e6 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
#include "mm.h"
@@ -216,7 +217,7 @@
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB,
.domain = DOMAIN_IO,
- },
+ },
[MT_DEVICE_WC] = { /* ioremap_wc */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
.prot_l1 = PMD_TYPE_TABLE,
@@ -777,14 +778,27 @@
create_mapping(md);
vm->addr = (void *)(md->virtual & PAGE_MASK);
vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
- vm->phys_addr = __pfn_to_phys(md->pfn);
- vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->phys_addr = __pfn_to_phys(md->pfn);
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
vm->flags |= VM_ARM_MTYPE(md->type);
vm->caller = iotable_init;
vm_area_add_early(vm++);
}
}
+void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
+ void *caller)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = size;
+ vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
+ vm->caller = caller;
+ vm_area_add_early(vm);
+}
+
#ifndef CONFIG_ARM_LPAE
/*
@@ -802,14 +816,7 @@
static void __init pmd_empty_section_gap(unsigned long addr)
{
- struct vm_struct *vm;
-
- vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
- vm->addr = (void *)addr;
- vm->size = SECTION_SIZE;
- vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
- vm->caller = pmd_empty_section_gap;
- vm_area_add_early(vm);
+ vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap);
}
static void __init fill_pmd_gaps(void)
@@ -820,7 +827,7 @@
/* we're still single threaded hence no lock needed here */
for (vm = vmlist; vm; vm = vm->next) {
- if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
continue;
addr = (unsigned long)vm->addr;
if (addr < next)
@@ -858,6 +865,28 @@
#define fill_pmd_gaps() do { } while (0)
#endif
+#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
+static void __init pci_reserve_io(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ addr &= ~(SZ_2M - 1);
+ if (addr == PCI_IO_VIRT_BASE)
+ return;
+
+ }
+ vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
+}
+#else
+#define pci_reserve_io() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
@@ -961,8 +990,8 @@
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
- if (__va(bank->start + bank->size) > vmalloc_min ||
- __va(bank->start + bank->size) < __va(bank->start)) {
+ if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+ __va(bank->start + bank->size - 1) <= __va(bank->start)) {
unsigned long newsize = vmalloc_min - __va(bank->start);
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",
@@ -1141,6 +1170,9 @@
mdesc->map_io();
fill_pmd_gaps();
+ /* Reserve fixed i/o space in VMALLOC region */
+ pci_reserve_io();
+
/*
* Finally flush the caches and tlb to ensure that we're in a
* consistent state wrt the writebuffer. This also ensures that
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 8daae9b..362474b 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -192,30 +192,24 @@
if (nr != 0)
return 0;
- res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- res[0].start = IOP3XX_PCI_LOWER_IO_PA;
- res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
- res[0].name = "IOP3XX PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
- request_resource(&ioport_resource, &res[0]);
-
- res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
- res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
- res[1].name = "IOP3XX PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
- request_resource(&iomem_resource, &res[1]);
+ res->start = IOP3XX_PCI_LOWER_MEM_PA;
+ res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+ res->name = "IOP3XX PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, res);
/*
* Use whatever translation is already setup.
*/
sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
- sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+ pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
return 1;
}
@@ -367,7 +361,6 @@
void __init iop3xx_pci_preinit(void)
{
- pcibios_min_io = 0;
pcibios_min_mem = 0;
iop3xx_atu_disable();
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index bade586..5b217f4 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -25,11 +25,6 @@
.pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
.length = IOP3XX_PERIPHERAL_SIZE,
.type = MT_UNCACHED,
- }, { /* PCI IO space */
- .virtual = IOP3XX_PCI_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
- .length = IOP3XX_PCI_IO_WINDOW_SIZE,
- .type = MT_DEVICE,
},
};
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6ac7200..149237e2 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := time.o devices.o cpu.o system.o irq-common.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
deleted file mode 100644
index 5079787..0000000
--- a/arch/arm/plat-mxc/clock.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-#ifndef CONFIG_COMMON_CLK
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
- WARN_ON(!clk->usecount);
-
- if (!(--clk->usecount)) {
- if (clk->disable)
- clk->disable(clk);
- __clk_disable(clk->parent);
- __clk_disable(clk->secondary);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (clk->usecount++ == 0) {
- __clk_enable(clk->parent);
- __clk_enable(clk->secondary);
-
- if (clk->enable)
- clk->enable(clk);
- }
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- struct clk *old;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL ||
- IS_ERR(parent) || clk->set_parent == NULL)
- return ret;
-
- if (clk->usecount)
- clk_enable(parent);
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_parent(clk, parent);
- if (ret == 0) {
- old = clk->parent;
- clk->parent = parent;
- } else {
- old = parent;
- }
- mutex_unlock(&clocks_mutex);
-
- if (clk->usecount)
- clk_disable(old);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- struct clk *ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#else
-
-/*
- * Lock to protect the clock module (ccm) registers. Used
- * on all i.MXs
- */
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-#endif /* CONFIG_COMMON_CLK */
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- * mfi + mfn / (mfd + 1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
- long long ll;
- int mfn_abs;
- unsigned int mfi, mfn, mfd, pd;
-
- mfi = (reg_val >> 10) & 0xf;
- mfn = reg_val & 0x3ff;
- mfd = (reg_val >> 16) & 0x3ff;
- pd = (reg_val >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- mfn_abs = mfn;
-
- /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
- * 2's complements number
- */
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- mfn_abs = 0x400 - mfn;
-
- freq *= 2;
- freq /= pd + 1;
-
- ll = (unsigned long long)freq * mfn_abs;
-
- do_div(ll, mfd + 1);
-
- if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
- ll = -ll;
-
- ll = (freq * mfi) + ll;
-
- return ll;
-}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 73db34b..b5b6f80 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -23,7 +23,6 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <mach/clock.h>
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2020d84..d390f00 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -87,7 +87,7 @@
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_imx_uart_data_entry(0, 1),
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
deleted file mode 100644
index bd940c7..0000000
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-#ifndef CONFIG_COMMON_CLK
-struct module;
-
-struct clk {
- int id;
- /* Source clock this clk depends on */
- struct clk *parent;
- /* Secondary clock to enable/disable with this clock */
- struct clk *secondary;
- /* Reference count of clock enable/disable */
- __s8 usecount;
- /* Register bit position for clock's enable/disable control. */
- u8 enable_shift;
- /* Register address for clock's enable/disable control. */
- void __iomem *enable_reg;
- u32 flags;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-#endif /* CONFIG_COMMON_CLK */
-
-extern spinlock_t imx_ccm_lock;
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7128e97..28ba09f 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -52,7 +52,6 @@
extern void imx35_soc_init(void);
extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
extern void imx51_init_late(void);
extern void imx53_init_late(void);
extern void epit_timer_init(void __iomem *base, int irq);
@@ -137,11 +136,6 @@
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
deleted file mode 100644
index 9761e00..0000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-
-#include <mach/iomux-v3.h>
-
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_ 0x00
-
-#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
- PAD_CTL_SRE_FAST)
-
-
-#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \
- IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \
- IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \
- IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \
- IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \
- IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \
- IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \
- IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \
- IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \
- IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \
- IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \
- IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \
- IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 3c080a3..7ded6f1 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,7 +23,6 @@
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
-#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
@@ -31,7 +30,6 @@
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 1996c3e..3da78cf 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,7 +21,6 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/common.h>
@@ -29,9 +28,6 @@
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
static void __iomem *wdog_base;
/*
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a017e99..dacaee0 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index e5778ed..111315a 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -18,7 +18,7 @@
#include <plat/common.h>
#include <plat/vram.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <plat/dma.h>
#include <plat/omap-secure.h>
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 6dcad58..c76ed8b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -968,8 +968,7 @@
l = p->dma_read(CCR, lch);
}
if (i >= 100)
- printk(KERN_ERR "DMA drain did not complete on "
- "lch %d\n", lch);
+ pr_err("DMA drain did not complete on lch %d\n", lch);
/* Restore OCP_SYSCONFIG */
p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
} else {
@@ -1153,8 +1152,7 @@
if ((dma_chan[lch_head].dev_id == -1) ||
(dma_chan[lch_queue].dev_id == -1)) {
- printk(KERN_ERR "omap_dma: trying to link "
- "non requested channels\n");
+ pr_err("omap_dma: trying to link non requested channels\n");
dump_stack();
}
@@ -1180,15 +1178,13 @@
if (dma_chan[lch_head].next_lch != lch_queue ||
dma_chan[lch_head].next_lch == -1) {
- printk(KERN_ERR "omap_dma: trying to unlink "
- "non linked channels\n");
+ pr_err("omap_dma: trying to unlink non linked channels\n");
dump_stack();
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
- printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
- "before unlinking\n");
+ pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
dump_stack();
}
@@ -1830,16 +1826,15 @@
if ((csr & 0x3f) == 0)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1)) {
- printk(KERN_WARNING "Spurious interrupt from DMA channel "
- "%d (CSR %04x)\n", ch, csr);
+ pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+ ch, csr);
return 0;
}
if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
- printk(KERN_WARNING "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
+ pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
- printk(KERN_WARNING "DMA synchronization event drop occurred "
- "with device %d\n", dma_chan[ch].dev_id);
+ pr_warn("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (likely(csr & OMAP_DMA_BLOCK_IRQ))
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
@@ -1879,21 +1874,19 @@
if (!status) {
if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
- ch);
+ pr_warn("Spurious DMA IRQ for lch %d\n", ch);
p->dma_write(1 << ch, IRQSTATUS_L0, ch);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
if (printk_ratelimit())
- printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
- "channel %d\n", status, ch);
+ pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
+ status, ch);
return 0;
}
if (unlikely(status & OMAP_DMA_DROP_IRQ))
- printk(KERN_INFO
- "DMA synchronization event drop occurred with device "
- "%d\n", dma_chan[ch].dev_id);
+ pr_info("DMA synchronization event drop occurred with device %d\n",
+ dma_chan[ch].dev_id);
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
@@ -2013,8 +2006,9 @@
p = pdev->dev.platform_data;
if (!p) {
- dev_err(&pdev->dev, "%s: System DMA initialized without"
- "platform data\n", __func__);
+ dev_err(&pdev->dev,
+ "%s: System DMA initialized without platform data\n",
+ __func__);
return -EINVAL;
}
@@ -2089,8 +2083,8 @@
}
ret = setup_irq(dma_irq, &omap24xx_dma_irq);
if (ret) {
- dev_err(&pdev->dev, "set_up failed for IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
goto exit_dma_lch_fail;
}
}
@@ -2098,8 +2092,7 @@
/* reserve dma channels 0 and 1 in high security devices */
if (cpu_is_omap34xx() &&
(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
- "HS ROM code\n");
+ pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
}
@@ -2107,8 +2100,8 @@
return 0;
exit_dma_irq_fail:
- dev_err(&pdev->dev, "unable to request IRQ %d"
- "for DMA (error %d)\n", dma_irq, ret);
+ dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
+ dma_irq, ret);
for (irq_rel = 0; irq_rel < ch; irq_rel++) {
dma_irq = platform_get_irq(pdev, irq_rel);
free_irq(dma_irq, (void *)(irq_rel + 1));
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 40bc06a..6013831 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -32,7 +32,6 @@
#include <linux/clk.h>
#include <mach/irqs.h>
-#include <plat/mux.h>
#include <plat/i2c.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index a531149..b2eac60 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -21,8 +21,6 @@
#include <linux/device.h>
#include <linux/pm_qos.h>
-#include <plat/mux.h>
-
#define DRIVER_NAME "omap_uart"
/*
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 9b9646c..0533073 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -615,6 +615,7 @@
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);
diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h
deleted file mode 100644
index 1eb4dc3..0000000
--- a/arch/arm/plat-omap/include/plat/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
deleted file mode 100644
index cff8712..0000000
--- a/arch/arm/plat-omap/mux.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
- if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
- || !arch_mux_cfg->cfg_reg) {
- printk(KERN_ERR "Invalid pin table\n");
- return -EINVAL;
- }
-
- mux_cfg = arch_mux_cfg;
-
- return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
- struct pin_config *reg;
-
- if (!cpu_class_is_omap1()) {
- printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
- index);
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (mux_cfg == NULL) {
- printk(KERN_ERR "Pin mux table not initialized\n");
- return -ENODEV;
- }
-
- if (index >= mux_cfg->size) {
- printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, mux_cfg->size);
- dump_stack();
- return -ENODEV;
- }
-
- reg = (struct pin_config *)&mux_cfg->pins[index];
-
- if (!mux_cfg->cfg_reg)
- return -ENODEV;
-
- return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x) do {} while(0)
-#endif /* CONFIG_OMAP_MUX */
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 5a97b4d..9f64133 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -41,11 +41,11 @@
};
if (t == -1)
- pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
@@ -70,11 +70,10 @@
};
if (r == 0)
- pr_debug("OMAP PM: remove min bus tput constraint: "
- "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+ pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
+ dev_name(dev), agent_id);
else
- pr_debug("OMAP PM: add min bus tput constraint: "
- "dev %s for agent_id %d: rate %ld KiB\n",
+ pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
@@ -97,11 +96,11 @@
};
if (t == -1)
- pr_debug("OMAP PM: remove max device latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max device latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max device latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux, this needs to map the device to a
@@ -127,11 +126,11 @@
};
if (t == -1)
- pr_debug("OMAP PM: remove max DMA latency constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add max DMA latency constraint: "
- "dev %s, t = %ld usec\n", dev_name(dev), t);
+ pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n",
+ dev_name(dev), t);
/*
* For current Linux PM QOS params, this code should scan the
@@ -156,11 +155,11 @@
}
if (r == 0)
- pr_debug("OMAP PM: remove min clk rate constraint: "
- "dev %s\n", dev_name(dev));
+ pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n",
+ dev_name(dev));
else
- pr_debug("OMAP PM: add min clk rate constraint: "
- "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+ pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n",
+ dev_name(dev), r);
/*
* Code in a real implementation should keep track of these
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 0f51982..d5f617c 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,4 +1,3 @@
-
/*
* omap_device implementation
*
@@ -153,21 +152,19 @@
act_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, act_lat);
+ "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+ od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
dev_dbg(&od->pdev->dev,
- "new worst case activate latency "
- "%d: %llu\n",
+ "new worst case activate latency %d: %llu\n",
od->pm_lat_level, act_lat);
} else
dev_warn(&od->pdev->dev,
- "activate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "activate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, act_lat,
odpl->activate_lat);
}
@@ -220,21 +217,19 @@
deact_lat = timespec_to_ns(&c);
dev_dbg(&od->pdev->dev,
- "omap_device: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pm_lat_level, deact_lat);
+ "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+ od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
dev_dbg(&od->pdev->dev,
- "new worst case deactivate latency "
- "%d: %llu\n",
+ "new worst case deactivate latency %d: %llu\n",
od->pm_lat_level, deact_lat);
} else
dev_warn(&od->pdev->dev,
- "deactivate latency %d "
- "higher than exptected. (%llu > %d)\n",
+ "deactivate latency %d higher than expected. (%llu > %d)\n",
od->pm_lat_level, deact_lat,
odpl->deactivate_lat);
}
@@ -370,6 +365,14 @@
goto odbfd_exit1;
}
+ /* Fix up missing resource names */
+ for (i = 0; i < pdev->num_resources; i++) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->name == NULL)
+ r->name = dev_name(&pdev->dev);
+ }
+
if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
omap_device_disable_idle_on_suspend(pdev);
@@ -453,8 +456,8 @@
for (i = 0; i < od->hwmods_cnt; i++)
c += omap_hwmod_count_resources(od->hwmods[i]);
- pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+ pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+ od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -490,6 +493,33 @@
}
/**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od. Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all. If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+ struct resource *res)
+{
+ int i, r;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+ res += r;
+ }
+
+ return 0;
+}
+
+/**
* omap_device_alloc - allocate an omap_device
* @pdev: platform_device that will be included in this omap_device
* @oh: ptr to the single omap_hwmod that backs this omap_device
@@ -528,24 +558,44 @@
od->hwmods = hwmods;
od->pdev = pdev;
- /*
- * HACK: Ideally the resources from DT should match, and hwmod
- * should just add the missing ones. Since the name is not
- * properly populated by DT, stick to hwmod resources only.
- */
- if (pdev->num_resources && pdev->resource)
- dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
- __func__, pdev->num_resources);
-
res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
- __func__, res_count);
+ /*
+ * DT Boot:
+ * OF framework will construct the resource structure (currently
+ * does for MEM & IRQ resource) and we should respect/use these
+ * resources, killing hwmod dependency.
+ * If pdev->num_resources > 0, we assume that MEM & IRQ resources
+ * have been allocated by OF layer already (through DTB).
+ *
+ * Non-DT Boot:
+ * Here, pdev->num_resources = 0, and we should get all the
+ * resources from hwmod.
+ *
+ * TODO: Once DMA resource is available from OF layer, we should
+ * kill filling any resources from hwmod.
+ */
+ if (res_count > pdev->num_resources) {
+ /* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
- omap_device_fill_resources(od, res);
+ /*
+ * If pdev->num_resources > 0, then assume that,
+ * MEM and IRQ resources will only come from DT and only
+ * fill DMA resource from hwmod layer.
+ */
+ if (pdev->num_resources && pdev->resource) {
+ dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, res_count);
+ memcpy(res, pdev->resource,
+ sizeof(struct resource) * pdev->num_resources);
+ _od_fill_dma_resources(od, &res[pdev->num_resources]);
+ } else {
+ dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+ __func__, res_count);
+ omap_device_fill_resources(od, res);
+ }
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index d861aa7..28acb38 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -67,6 +67,7 @@
static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
@@ -105,6 +106,7 @@
*/
static void __init omap_detect_sram(void)
{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
@@ -112,6 +114,7 @@
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
} else {
omap_sram_size = 0x8000; /* 32K */
}
@@ -174,8 +177,10 @@
return;
#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
omap_sram_start += PAGE_SIZE;
omap_sram_size -= SZ_16K;
+ }
#endif
if (cpu_is_omap34xx()) {
/*
@@ -202,8 +207,8 @@
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
- memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
/*
@@ -217,7 +222,7 @@
{
unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
- available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+ available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
if (size > available) {
pr_err("Not enough space in SRAM\n");
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
index bab1392..d1ecef0 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
- /* 1:1 mapping between cfgpin and setcfg calls at the moment */
- s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 2997e56..7bc7948 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -158,7 +158,6 @@
stargate2 MACH_STARGATE2 STARGATE2 774
intelmote2 MACH_INTELMOTE2 INTELMOTE2 775
trizeps4 MACH_TRIZEPS4 TRIZEPS4 776
-pnx4008 MACH_PNX4008 PNX4008 782
cpuat91 MACH_CPUAT91 CPUAT91 787
iq81340sc MACH_IQ81340SC IQ81340SC 799
iq81340mc MACH_IQ81340MC IQ81340MC 801
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f348619..c7092e6 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -38,6 +38,7 @@
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP
+ select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index d3d7e64..66cf000 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -20,7 +20,6 @@
KBUILD_AFLAGS += $(call cc-option,-mno-fdpic)
KBUILD_CFLAGS_MODULE += -mlong-calls
LDFLAGS += -m elf32bfin
-KALLSYMS += --symbol-prefix=_
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index dc3d144..9631598 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -18,6 +18,8 @@
#define raw_smp_processor_id() blackfin_core_id()
extern void bfin_relocate_coreb_l1_mem(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 00bbe67..a401513 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -48,10 +48,13 @@
struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
-#define BFIN_IPI_TIMER 0
-#define BFIN_IPI_RESCHEDULE 1
-#define BFIN_IPI_CALL_FUNC 2
-#define BFIN_IPI_CPU_STOP 3
+enum ipi_message_type {
+ BFIN_IPI_TIMER,
+ BFIN_IPI_RESCHEDULE,
+ BFIN_IPI_CALL_FUNC,
+ BFIN_IPI_CALL_FUNC_SINGLE,
+ BFIN_IPI_CPU_STOP,
+};
struct blackfin_flush_data {
unsigned long start;
@@ -60,35 +63,20 @@
void *secondary_stack;
-
-struct smp_call_struct {
- void (*func)(void *info);
- void *info;
- int wait;
- cpumask_t *waitmask;
-};
-
static struct blackfin_flush_data smp_flush_data;
static DEFINE_SPINLOCK(stop_lock);
-struct ipi_message {
- unsigned long type;
- struct smp_call_struct call_struct;
-};
-
/* A magic number - stress test shows this is safe for common cases */
#define BFIN_IPI_MSGQ_LEN 5
/* Simple FIFO buffer, overflow leads to panic */
-struct ipi_message_queue {
- spinlock_t lock;
+struct ipi_data {
unsigned long count;
- unsigned long head; /* head of the queue */
- struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN];
+ unsigned long bits;
};
-static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue);
+static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
static void ipi_cpu_stop(unsigned int cpu)
{
@@ -129,28 +117,6 @@
blackfin_icache_flush_range(fdata->start, fdata->end);
}
-static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
-{
- int wait;
- void (*func)(void *info);
- void *info;
- func = msg->call_struct.func;
- info = msg->call_struct.info;
- wait = msg->call_struct.wait;
- func(info);
- if (wait) {
-#ifdef __ARCH_SYNC_CORE_DCACHE
- /*
- * 'wait' usually means synchronization between CPUs.
- * Invalidate D cache in case shared data was changed
- * by func() to ensure cache coherence.
- */
- resync_core_dcache();
-#endif
- cpumask_clear_cpu(cpu, msg->call_struct.waitmask);
- }
-}
-
/* Use IRQ_SUPPLE_0 to request reschedule.
* When returning from interrupt to user space,
* there is chance to reschedule */
@@ -172,152 +138,95 @@
static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
{
- struct ipi_message *msg;
- struct ipi_message_queue *msg_queue;
+ struct ipi_data *bfin_ipi_data;
unsigned int cpu = smp_processor_id();
- unsigned long flags;
+ unsigned long pending;
+ unsigned long msg;
platform_clear_ipi(cpu, IRQ_SUPPLE_1);
- msg_queue = &__get_cpu_var(ipi_msg_queue);
+ bfin_ipi_data = &__get_cpu_var(bfin_ipi);
- spin_lock_irqsave(&msg_queue->lock, flags);
+ while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
+ msg = 0;
+ do {
+ msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
+ switch (msg) {
+ case BFIN_IPI_TIMER:
+ ipi_timer();
+ break;
+ case BFIN_IPI_RESCHEDULE:
+ scheduler_ipi();
+ break;
+ case BFIN_IPI_CALL_FUNC:
+ generic_smp_call_function_interrupt();
+ break;
- while (msg_queue->count) {
- msg = &msg_queue->ipi_message[msg_queue->head];
- switch (msg->type) {
- case BFIN_IPI_TIMER:
- ipi_timer();
- break;
- case BFIN_IPI_RESCHEDULE:
- scheduler_ipi();
- break;
- case BFIN_IPI_CALL_FUNC:
- ipi_call_function(cpu, msg);
- break;
- case BFIN_IPI_CPU_STOP:
- ipi_cpu_stop(cpu);
- break;
- default:
- printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
- cpu, msg->type);
- break;
- }
- msg_queue->head++;
- msg_queue->head %= BFIN_IPI_MSGQ_LEN;
- msg_queue->count--;
+ case BFIN_IPI_CALL_FUNC_SINGLE:
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ case BFIN_IPI_CPU_STOP:
+ ipi_cpu_stop(cpu);
+ break;
+ }
+ } while (msg < BITS_PER_LONG);
+
+ smp_mb();
}
- spin_unlock_irqrestore(&msg_queue->lock, flags);
return IRQ_HANDLED;
}
-static void ipi_queue_init(void)
+static void bfin_ipi_init(void)
{
unsigned int cpu;
- struct ipi_message_queue *msg_queue;
+ struct ipi_data *bfin_ipi_data;
for_each_possible_cpu(cpu) {
- msg_queue = &per_cpu(ipi_msg_queue, cpu);
- spin_lock_init(&msg_queue->lock);
- msg_queue->count = 0;
- msg_queue->head = 0;
+ bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+ bfin_ipi_data->bits = 0;
+ bfin_ipi_data->count = 0;
}
}
-static inline void smp_send_message(cpumask_t callmap, unsigned long type,
- void (*func) (void *info), void *info, int wait)
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
{
unsigned int cpu;
- struct ipi_message_queue *msg_queue;
- struct ipi_message *msg;
- unsigned long flags, next_msg;
- cpumask_t waitmask; /* waitmask is shared by all cpus */
+ struct ipi_data *bfin_ipi_data;
+ unsigned long flags;
- cpumask_copy(&waitmask, &callmap);
- for_each_cpu(cpu, &callmap) {
- msg_queue = &per_cpu(ipi_msg_queue, cpu);
- spin_lock_irqsave(&msg_queue->lock, flags);
- if (msg_queue->count < BFIN_IPI_MSGQ_LEN) {
- next_msg = (msg_queue->head + msg_queue->count)
- % BFIN_IPI_MSGQ_LEN;
- msg = &msg_queue->ipi_message[next_msg];
- msg->type = type;
- if (type == BFIN_IPI_CALL_FUNC) {
- msg->call_struct.func = func;
- msg->call_struct.info = info;
- msg->call_struct.wait = wait;
- msg->call_struct.waitmask = &waitmask;
- }
- msg_queue->count++;
- } else
- panic("IPI message queue overflow\n");
- spin_unlock_irqrestore(&msg_queue->lock, flags);
+ local_irq_save(flags);
+
+ for_each_cpu(cpu, cpumask) {
+ bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+ smp_mb();
+ set_bit(msg, &bfin_ipi_data->bits);
+ bfin_ipi_data->count++;
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
}
- if (wait) {
- while (!cpumask_empty(&waitmask))
- blackfin_dcache_invalidate_range(
- (unsigned long)(&waitmask),
- (unsigned long)(&waitmask));
-#ifdef __ARCH_SYNC_CORE_DCACHE
- /*
- * Invalidate D cache in case shared data was changed by
- * other processors to ensure cache coherence.
- */
- resync_core_dcache();
-#endif
- }
+ local_irq_restore(flags);
}
-int smp_call_function(void (*func)(void *info), void *info, int wait)
+void arch_send_call_function_single_ipi(int cpu)
{
- cpumask_t callmap;
-
- preempt_disable();
- cpumask_copy(&callmap, cpu_online_mask);
- cpumask_clear_cpu(smp_processor_id(), &callmap);
- if (!cpumask_empty(&callmap))
- smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
- preempt_enable();
-
- return 0;
+ send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE);
}
-EXPORT_SYMBOL_GPL(smp_call_function);
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
- int wait)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
- unsigned int cpu = cpuid;
- cpumask_t callmap;
-
- if (cpu_is_offline(cpu))
- return 0;
- cpumask_clear(&callmap);
- cpumask_set_cpu(cpu, &callmap);
-
- smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
- return 0;
+ send_ipi(mask, BFIN_IPI_CALL_FUNC);
}
-EXPORT_SYMBOL_GPL(smp_call_function_single);
void smp_send_reschedule(int cpu)
{
- cpumask_t callmap;
- /* simply trigger an ipi */
-
- cpumask_clear(&callmap);
- cpumask_set_cpu(cpu, &callmap);
-
- smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0);
+ send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
return;
}
void smp_send_msg(const struct cpumask *mask, unsigned long type)
{
- smp_send_message(*mask, type, NULL, NULL, 0);
+ send_ipi(mask, type);
}
void smp_timer_broadcast(const struct cpumask *mask)
@@ -333,7 +242,7 @@
cpumask_copy(&callmap, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &callmap);
if (!cpumask_empty(&callmap))
- smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0);
+ send_ipi(&callmap, BFIN_IPI_CPU_STOP);
preempt_enable();
@@ -436,7 +345,7 @@
void __init smp_prepare_cpus(unsigned int max_cpus)
{
platform_prepare_cpus(max_cpus);
- ipi_queue_init();
+ bfin_ipi_init();
platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
}
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index a1e9d69..584b936 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -169,7 +169,7 @@
if (*offset)
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val < oprofile_min_interval)
oprofile_hw_interval = oprofile_min_interval;
@@ -212,7 +212,7 @@
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0)
return -EINVAL;
@@ -243,7 +243,7 @@
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
@@ -278,7 +278,7 @@
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
@@ -317,7 +317,7 @@
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (val != 0 && val != 1)
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 7f2739e..0d3d63a 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -2008,6 +2008,7 @@
break;
case 28: /* Atom */
+ case 54: /* Cedariew */
memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index 520b426..da02e9c 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -686,7 +686,8 @@
* to have an operational LBR which can freeze
* on PMU interrupt
*/
- if (boot_cpu_data.x86_mask < 10) {
+ if (boot_cpu_data.x86_model == 28
+ && boot_cpu_data.x86_mask < 10) {
pr_cont("LBR disabled due to erratum");
return;
}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 4873e62..9e5bcf1 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -225,6 +225,9 @@
if (do_microcode_update(buf, len) == 0)
ret = (ssize_t)len;
+ if (ret > 0)
+ perf_check_microcode();
+
mutex_unlock(µcode_mutex);
put_online_cpus();
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index e498b18..9fc9aa7 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -318,7 +318,7 @@
if (val & 0x10) {
u8 edge_irr = s->irr & ~s->elcr;
int i;
- bool found;
+ bool found = false;
struct kvm_vcpu *vcpu;
s->init4 = val & 1;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c00f03d..b1eb202 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3619,6 +3619,7 @@
static int alloc_apic_access_page(struct kvm *kvm)
{
+ struct page *page;
struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
@@ -3633,7 +3634,13 @@
if (r)
goto out;
- kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+ page = gfn_to_page(kvm, 0xfee00);
+ if (is_error_page(page)) {
+ r = -EFAULT;
+ goto out;
+ }
+
+ kvm->arch.apic_access_page = page;
out:
mutex_unlock(&kvm->slots_lock);
return r;
@@ -3641,6 +3648,7 @@
static int alloc_identity_pagetable(struct kvm *kvm)
{
+ struct page *page;
struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
@@ -3656,8 +3664,13 @@
if (r)
goto out;
- kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
- kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+ page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+ if (is_error_page(page)) {
+ r = -EFAULT;
+ goto out;
+ }
+
+ kvm->arch.ept_identity_pagetable = page;
out:
mutex_unlock(&kvm->slots_lock);
return r;
@@ -6575,7 +6588,7 @@
/* Exposing INVPCID only when PCID is exposed */
best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
if (vmx_invpcid_supported() &&
- best && (best->ecx & bit(X86_FEATURE_INVPCID)) &&
+ best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
guest_cpuid_has_pcid(vcpu)) {
exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
@@ -6585,7 +6598,7 @@
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
exec_control);
if (best)
- best->ecx &= ~bit(X86_FEATURE_INVPCID);
+ best->ebx &= ~bit(X86_FEATURE_INVPCID);
}
}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 148ed66..2966c84 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5113,17 +5113,20 @@
!kvm_event_needs_reinjection(vcpu);
}
-static void vapic_enter(struct kvm_vcpu *vcpu)
+static int vapic_enter(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
struct page *page;
if (!apic || !apic->vapic_addr)
- return;
+ return 0;
page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+ if (is_error_page(page))
+ return -EFAULT;
vcpu->arch.apic->vapic_page = page;
+ return 0;
}
static void vapic_exit(struct kvm_vcpu *vcpu)
@@ -5430,7 +5433,11 @@
}
vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
- vapic_enter(vcpu);
+ r = vapic_enter(vcpu);
+ if (r) {
+ srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
+ return r;
+ }
r = 1;
while (r > 0) {
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 5ef7ba6..d0583a4 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -336,7 +336,7 @@
cryptlen += ivsize;
}
- if (sg_is_last(assoc)) {
+ if (req->assoclen && sg_is_last(assoc)) {
authenc_ahash_fn = crypto_authenc_ahash;
sg_init_table(asg, 2);
sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
@@ -490,7 +490,7 @@
cryptlen += ivsize;
}
- if (sg_is_last(assoc)) {
+ if (req->assoclen && sg_is_last(assoc)) {
authenc_ahash_fn = crypto_authenc_ahash;
sg_init_table(asg, 2);
sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 9628652..e059695 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -237,6 +237,16 @@
} else if (result == ACPI_STATE_D3_HOT) {
result = ACPI_STATE_D3;
}
+
+ /*
+ * If we were unsure about the device parent's power state up to this
+ * point, the fact that the device is in D0 implies that the parent has
+ * to be in D0 too.
+ */
+ if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
+ && result == ACPI_STATE_D0)
+ device->parent->power.state = ACPI_STATE_D0;
+
*state = result;
out:
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index fc18034..40e38a0 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -107,6 +107,7 @@
/* List of devices relying on this power resource */
struct acpi_power_resource_device *devices;
+ struct mutex devices_lock;
};
static struct list_head acpi_power_resource_list;
@@ -225,7 +226,6 @@
static int __acpi_power_on(struct acpi_power_resource *resource)
{
- struct acpi_power_resource_device *device_list = resource->devices;
acpi_status status = AE_OK;
status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
@@ -238,19 +238,15 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
resource->name));
- while (device_list) {
- acpi_power_on_device(device_list->device);
-
- device_list = device_list->next;
- }
-
return 0;
}
static int acpi_power_on(acpi_handle handle)
{
int result = 0;
+ bool resume_device = false;
struct acpi_power_resource *resource = NULL;
+ struct acpi_power_resource_device *device_list;
result = acpi_power_get_context(handle, &resource);
if (result)
@@ -266,10 +262,25 @@
result = __acpi_power_on(resource);
if (result)
resource->ref_count--;
+ else
+ resume_device = true;
}
mutex_unlock(&resource->resource_lock);
+ if (!resume_device)
+ return result;
+
+ mutex_lock(&resource->devices_lock);
+
+ device_list = resource->devices;
+ while (device_list) {
+ acpi_power_on_device(device_list->device);
+ device_list = device_list->next;
+ }
+
+ mutex_unlock(&resource->devices_lock);
+
return result;
}
@@ -355,7 +366,7 @@
if (acpi_power_get_context(res_handle, &resource))
return;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
prev = NULL;
curr = resource->devices;
while (curr) {
@@ -372,7 +383,7 @@
prev = curr;
curr = curr->next;
}
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
}
/* Unlink dev from all power resources in _PR0 */
@@ -414,10 +425,10 @@
power_resource_device->device = powered_device;
- mutex_lock(&resource->resource_lock);
+ mutex_lock(&resource->devices_lock);
power_resource_device->next = resource->devices;
resource->devices = power_resource_device;
- mutex_unlock(&resource->resource_lock);
+ mutex_unlock(&resource->devices_lock);
return 0;
}
@@ -462,7 +473,7 @@
return ret;
no_power_resource:
- printk(KERN_WARNING PREFIX "Invalid Power Resource to register!");
+ printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
return -ENODEV;
}
EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
@@ -721,6 +732,7 @@
resource->device = device;
mutex_init(&resource->resource_lock);
+ mutex_init(&resource->devices_lock);
strcpy(resource->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 50d5dea..7862d17 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -268,6 +268,9 @@
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+ /* JMicron 362B and 362C have an AHCI function with IDE class code */
+ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+ { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -393,6 +396,8 @@
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(0x1b4b, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(0x1b4b, 0x9192),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(0x1b4b, 0x91a3),
.driver_data = board_ahci_yes_fbs },
@@ -400,7 +405,10 @@
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
/* Asmedia */
- { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */
+ { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 11f36e5..fc2de55 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -86,6 +86,7 @@
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
@@ -109,6 +110,7 @@
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index cef3bac..654e248 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -52,6 +52,9 @@
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* Apple-specific (Broadcom) devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
@@ -94,16 +97,14 @@
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
- { USB_DEVICE(0x0a5c, 0x21e3) },
- { USB_DEVICE(0x0a5c, 0x21e6) },
- { USB_DEVICE(0x0a5c, 0x21e8) },
- { USB_DEVICE(0x0a5c, 0x21f3) },
- { USB_DEVICE(0x0a5c, 0x21f4) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
{ USB_DEVICE(0x0489, 0xe033) },
+ /*Broadcom devices with vendor specific id */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
@@ -141,6 +142,7 @@
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7f0b5ca..bace9e9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -40,4 +40,17 @@
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
+config COMMON_CLK_VERSATILE
+ bool "Clock driver for ARM Reference designs"
+ depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+ ---help---
+ Supports clocking on ARM Reference designs Integrator/AP,
+ Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+
+config COMMON_CLK_MAX77686
+ tristate "Clock driver for Maxim 77686 MFD"
+ depends on MFD_MAX77686
+ ---help---
+ This driver supports Maxim 77686 crystal oscillator clock.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d5c19d1..9184b5e 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -10,7 +10,14 @@
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
-obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
+obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
+obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_MMP) += mmp/
+endif
+obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_U8500) += ux500/
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
+obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
new file mode 100644
index 0000000..f20b750
--- /dev/null
+++ b/drivers/clk/clk-ls1x.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <loongson1.h>
+
+#define OSC 33
+
+static DEFINE_SPINLOCK(_lock);
+
+static int ls1x_pll_clk_enable(struct clk_hw *hw)
+{
+ return 0;
+}
+
+static void ls1x_pll_clk_disable(struct clk_hw *hw)
+{
+}
+
+static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 pll, rate;
+
+ pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+ rate = ((12 + (pll & 0x3f)) * 1000000) +
+ ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
+ rate *= OSC;
+ rate >>= 1;
+
+ return rate;
+}
+
+static const struct clk_ops ls1x_pll_clk_ops = {
+ .enable = ls1x_pll_clk_enable,
+ .disable = ls1x_pll_clk_disable,
+ .recalc_rate = ls1x_pll_recalc_rate,
+};
+
+static struct clk * __init clk_register_pll(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags)
+{
+ struct clk_hw *hw;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the divider */
+ hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
+ if (!hw) {
+ pr_err("%s: could not allocate clk_hw\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &ls1x_pll_clk_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ hw->init = &init;
+
+ /* register the clock */
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ kfree(hw);
+
+ return clk;
+}
+
+void __init ls1x_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
+ clk_prepare_enable(clk);
+
+ clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
+ DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "cpu", NULL);
+
+ clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+ DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "dc", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll_clk",
+ CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+ DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "ahb", NULL);
+ clk_register_clkdev(clk, "stmmaceth", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2);
+ clk_prepare_enable(clk);
+ clk_register_clkdev(clk, "apb", NULL);
+ clk_register_clkdev(clk, "serial8250", NULL);
+}
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
new file mode 100644
index 0000000..ac5f543
--- /dev/null
+++ b/drivers/clk/clk-max77686.c
@@ -0,0 +1,244 @@
+/*
+ * clk-max77686.c - Clock driver for Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/clkdev.h>
+
+enum {
+ MAX77686_CLK_AP = 0,
+ MAX77686_CLK_CP,
+ MAX77686_CLK_PMIC,
+ MAX77686_CLKS_NUM,
+};
+
+struct max77686_clk {
+ struct max77686_dev *iodev;
+ u32 mask;
+ struct clk_hw hw;
+ struct clk_lookup *lookup;
+};
+
+static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct max77686_clk, hw);
+}
+
+static int max77686_clk_prepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
+
+ return ret;
+}
+
+static void max77686_clk_unprepare(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return;
+
+ regmap_update_bits(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
+}
+
+static int max77686_clk_is_enabled(struct clk_hw *hw)
+{
+ struct max77686_clk *max77686;
+ int ret;
+ u32 val;
+
+ max77686 = get_max77686_clk(hw);
+ if (!max77686)
+ return -ENOMEM;
+
+ ret = regmap_read(max77686->iodev->regmap,
+ MAX77686_REG_32KHZ, &val);
+
+ if (ret < 0)
+ return -EINVAL;
+
+ return val & max77686->mask;
+}
+
+static struct clk_ops max77686_clk_ops = {
+ .prepare = max77686_clk_prepare,
+ .unprepare = max77686_clk_unprepare,
+ .is_enabled = max77686_clk_is_enabled,
+};
+
+static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
+ [MAX77686_CLK_AP] = {
+ .name = "32khz_ap",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_CP] = {
+ .name = "32khz_cp",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [MAX77686_CLK_PMIC] = {
+ .name = "32khz_pmic",
+ .ops = &max77686_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
+static int max77686_clk_register(struct device *dev,
+ struct max77686_clk *max77686)
+{
+ struct clk *clk;
+ struct clk_hw *hw = &max77686->hw;
+
+ clk = clk_register(dev, hw);
+
+ if (IS_ERR(clk))
+ return -ENOMEM;
+
+ max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
+ GFP_KERNEL);
+ if (IS_ERR(max77686->lookup))
+ return -ENOMEM;
+
+ max77686->lookup->con_id = hw->init->name;
+ max77686->lookup->clk = clk;
+
+ clkdev_add(max77686->lookup);
+
+ return 0;
+}
+
+static __devinit int max77686_clk_probe(struct platform_device *pdev)
+{
+ struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77686_clk **max77686_clks;
+ int i, ret;
+
+ max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
+ * MAX77686_CLKS_NUM, GFP_KERNEL);
+ if (IS_ERR(max77686_clks))
+ return -ENOMEM;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i] = devm_kzalloc(&pdev->dev,
+ sizeof(struct max77686_clk), GFP_KERNEL);
+ if (IS_ERR(max77686_clks[i]))
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ max77686_clks[i]->iodev = iodev;
+ max77686_clks[i]->mask = 1 << i;
+ max77686_clks[i]->hw.init = &max77686_clks_init[i];
+
+ ret = max77686_clk_register(&pdev->dev, max77686_clks[i]);
+ if (ret) {
+ switch (i) {
+ case MAX77686_CLK_AP:
+ dev_err(&pdev->dev, "Fail to register CLK_AP\n");
+ goto err_clk_ap;
+ break;
+ case MAX77686_CLK_CP:
+ dev_err(&pdev->dev, "Fail to register CLK_CP\n");
+ goto err_clk_cp;
+ break;
+ case MAX77686_CLK_PMIC:
+ dev_err(&pdev->dev, "Fail to register CLK_PMIC\n");
+ goto err_clk_pmic;
+ }
+ }
+ }
+
+ platform_set_drvdata(pdev, max77686_clks);
+
+ goto out;
+
+err_clk_pmic:
+ clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk);
+err_clk_cp:
+ clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup);
+ kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk);
+err_clk_ap:
+out:
+ return ret;
+}
+
+static int __devexit max77686_clk_remove(struct platform_device *pdev)
+{
+ struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+ clkdev_drop(max77686_clks[i]->lookup);
+ kfree(max77686_clks[i]->hw.clk);
+ }
+ return 0;
+}
+
+static const struct platform_device_id max77686_clk_id[] = {
+ { "max77686-clk", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_clk_id);
+
+static struct platform_driver max77686_clk_driver = {
+ .driver = {
+ .name = "max77686-clk",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77686_clk_probe,
+ .remove = __devexit_p(max77686_clk_remove),
+ .id_table = max77686_clk_id,
+};
+
+static int __init max77686_clk_init(void)
+{
+ return platform_driver_register(&max77686_clk_driver);
+}
+subsys_initcall(max77686_clk_init);
+
+static void __init max77686_clk_cleanup(void)
+{
+ platform_driver_unregister(&max77686_clk_driver);
+}
+module_exit(max77686_clk_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
+MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c
new file mode 100644
index 0000000..517874f
--- /dev/null
+++ b/drivers/clk/clk-prima2.c
@@ -0,0 +1,1171 @@
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define SIRFSOC_CLKC_CLK_EN0 0x0000
+#define SIRFSOC_CLKC_CLK_EN1 0x0004
+#define SIRFSOC_CLKC_REF_CFG 0x0014
+#define SIRFSOC_CLKC_CPU_CFG 0x0018
+#define SIRFSOC_CLKC_MEM_CFG 0x001c
+#define SIRFSOC_CLKC_SYS_CFG 0x0020
+#define SIRFSOC_CLKC_IO_CFG 0x0024
+#define SIRFSOC_CLKC_DSP_CFG 0x0028
+#define SIRFSOC_CLKC_GFX_CFG 0x002c
+#define SIRFSOC_CLKC_MM_CFG 0x0030
+#define SIRFSOC_CLKC_LCD_CFG 0x0034
+#define SIRFSOC_CLKC_MMC_CFG 0x0038
+#define SIRFSOC_CLKC_PLL1_CFG0 0x0040
+#define SIRFSOC_CLKC_PLL2_CFG0 0x0044
+#define SIRFSOC_CLKC_PLL3_CFG0 0x0048
+#define SIRFSOC_CLKC_PLL1_CFG1 0x004c
+#define SIRFSOC_CLKC_PLL2_CFG1 0x0050
+#define SIRFSOC_CLKC_PLL3_CFG1 0x0054
+#define SIRFSOC_CLKC_PLL1_CFG2 0x0058
+#define SIRFSOC_CLKC_PLL2_CFG2 0x005c
+#define SIRFSOC_CLKC_PLL3_CFG2 0x0060
+#define SIRFSOC_USBPHY_PLL_CTRL 0x0008
+#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1)
+#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2)
+#define SIRFSOC_USBPHY_PLL_LOCK BIT(3)
+
+static void *sirfsoc_clk_vbase, *sirfsoc_rsc_vbase;
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+/*
+ * SiRFprimaII clock controller
+ * - 2 oscillators: osc-26MHz, rtc-32.768KHz
+ * - 3 standard configurable plls: pll1, pll2 & pll3
+ * - 2 exclusive plls: usb phy pll and sata phy pll
+ * - 8 clock domains: cpu/cpudiv, mem/memdiv, sys/io, dsp, graphic, multimedia,
+ * display and sdphy.
+ * Each clock domain can select its own clock source from five clock sources,
+ * X_XIN, X_XINW, PLL1, PLL2 and PLL3. The domain clock is used as the source
+ * clock of the group clock.
+ * - dsp domain: gps, mf
+ * - io domain: dmac, nand, audio, uart, i2c, spi, usp, pwm, pulse
+ * - sys domain: security
+ */
+
+struct clk_pll {
+ struct clk_hw hw;
+ unsigned short regofs; /* register offset */
+};
+
+#define to_pllclk(_hw) container_of(_hw, struct clk_pll, hw)
+
+struct clk_dmn {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+ unsigned short regofs; /* register offset */
+};
+
+#define to_dmnclk(_hw) container_of(_hw, struct clk_dmn, hw)
+
+struct clk_std {
+ struct clk_hw hw;
+ signed char enable_bit; /* enable bit: 0 ~ 63 */
+};
+
+#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
+
+static int std_clk_is_enabled(struct clk_hw *hw);
+static int std_clk_enable(struct clk_hw *hw);
+static void std_clk_disable(struct clk_hw *hw);
+
+static inline unsigned long clkc_readl(unsigned reg)
+{
+ return readl(sirfsoc_clk_vbase + reg);
+}
+
+static inline void clkc_writel(u32 val, unsigned reg)
+{
+ writel(val, sirfsoc_clk_vbase + reg);
+}
+
+/*
+ * std pll
+ */
+
+static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long fin = parent_rate;
+ struct clk_pll *clk = to_pllclk(hw);
+ u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
+ SIRFSOC_CLKC_PLL1_CFG0;
+
+ if (clkc_readl(regcfg2) & BIT(2)) {
+ /* pll bypass mode */
+ return fin;
+ } else {
+ /* fout = fin * nf / nr / od */
+ u32 cfg0 = clkc_readl(clk->regofs);
+ u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
+ u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
+ u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
+ WARN_ON(fin % MHZ);
+ return fin / MHZ * nf / nr / od * MHZ;
+ }
+}
+
+static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin, nf, nr, od;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+ rate = rate - rate % MHZ;
+
+ nf = rate / MHZ;
+ if (nf > BIT(13))
+ nf = BIT(13);
+ if (nf < 1)
+ nf = 1;
+
+ fin = *parent_rate;
+
+ nr = fin / MHZ;
+ if (nr > BIT(6))
+ nr = BIT(6);
+ od = 1;
+
+ return fin * nf / (nr * od);
+}
+
+static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *clk = to_pllclk(hw);
+ unsigned long fin, nf, nr, od, reg;
+
+ /*
+ * fout = fin * nf / (nr * od);
+ * set od = 1, nr = fin/MHz, so fout = nf * MHz
+ */
+
+ nf = rate / MHZ;
+ if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
+ return -EINVAL;
+
+ fin = parent_rate;
+ BUG_ON(fin < MHZ);
+
+ nr = fin / MHZ;
+ BUG_ON((fin % MHZ) || nr > BIT(6));
+
+ od = 1;
+
+ reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
+ clkc_writel(reg, clk->regofs);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
+ clkc_writel((nf >> 1) - 1, reg);
+
+ reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
+ while (!(clkc_readl(reg) & BIT(6)))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops std_pll_ops = {
+ .recalc_rate = pll_clk_recalc_rate,
+ .round_rate = pll_clk_round_rate,
+ .set_rate = pll_clk_set_rate,
+};
+
+static const char *pll_clk_parents[] = {
+ "osc",
+};
+
+static struct clk_init_data clk_pll1_init = {
+ .name = "pll1",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll2_init = {
+ .name = "pll2",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_init_data clk_pll3_init = {
+ .name = "pll3",
+ .ops = &std_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_pll clk_pll1 = {
+ .regofs = SIRFSOC_CLKC_PLL1_CFG0,
+ .hw = {
+ .init = &clk_pll1_init,
+ },
+};
+
+static struct clk_pll clk_pll2 = {
+ .regofs = SIRFSOC_CLKC_PLL2_CFG0,
+ .hw = {
+ .init = &clk_pll2_init,
+ },
+};
+
+static struct clk_pll clk_pll3 = {
+ .regofs = SIRFSOC_CLKC_PLL3_CFG0,
+ .hw = {
+ .init = &clk_pll3_init,
+ },
+};
+
+/*
+ * usb uses specified pll
+ */
+
+static int usb_pll_clk_enable(struct clk_hw *hw)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg &= ~(SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ while (!(readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL) &
+ SIRFSOC_USBPHY_PLL_LOCK))
+ cpu_relax();
+
+ return 0;
+}
+
+static void usb_pll_clk_disable(struct clk_hw *clk)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ reg |= (SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS);
+ writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+}
+
+static unsigned long usb_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL);
+ return (reg & SIRFSOC_USBPHY_PLL_BYPASS) ? parent_rate : 48*MHZ;
+}
+
+static struct clk_ops usb_pll_ops = {
+ .enable = usb_pll_clk_enable,
+ .disable = usb_pll_clk_disable,
+ .recalc_rate = usb_pll_clk_recalc_rate,
+};
+
+static struct clk_init_data clk_usb_pll_init = {
+ .name = "usb_pll",
+ .ops = &usb_pll_ops,
+ .parent_names = pll_clk_parents,
+ .num_parents = ARRAY_SIZE(pll_clk_parents),
+};
+
+static struct clk_hw usb_pll_clk_hw = {
+ .init = &clk_usb_pll_init,
+};
+
+/*
+ * clock domains - cpu, mem, sys/io, dsp, gfx
+ */
+
+static const char *dmn_clk_parents[] = {
+ "rtc",
+ "osc",
+ "pll1",
+ "pll2",
+ "pll3",
+};
+
+static u8 dmn_clk_get_parent(struct clk_hw *hw)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return 4;
+
+ WARN_ON((cfg & (BIT(3) - 1)) > 4);
+
+ return cfg & (BIT(3) - 1);
+}
+
+static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ u32 cfg = clkc_readl(clk->regofs);
+
+ /* parent of io domain can only be pll3 */
+ if (strcmp(hw->init->name, "io") == 0)
+ return -EINVAL;
+
+ cfg &= ~(BIT(3) - 1);
+ clkc_writel(cfg | parent, clk->regofs);
+ /* BIT(3) - switching status: 1 - busy, 0 - done */
+ while (clkc_readl(clk->regofs) & BIT(3))
+ cpu_relax();
+
+ return 0;
+}
+
+static unsigned long dmn_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+
+{
+ unsigned long fin = parent_rate;
+ struct clk_dmn *clk = to_dmnclk(hw);
+
+ u32 cfg = clkc_readl(clk->regofs);
+
+ if (cfg & BIT(24)) {
+ /* fcd bypass mode */
+ return fin;
+ } else {
+ /*
+ * wait count: bit[19:16], hold count: bit[23:20]
+ */
+ u32 wait = (cfg >> 16) & (BIT(4) - 1);
+ u32 hold = (cfg >> 20) & (BIT(4) - 1);
+
+ return fin / (wait + hold + 2);
+ }
+}
+
+static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long fin;
+ unsigned ratio, wait, hold;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = *parent_rate;
+ ratio = fin / rate;
+
+ if (ratio < 2)
+ ratio = 2;
+ if (ratio > BIT(bits + 1))
+ ratio = BIT(bits + 1);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ return fin / (wait + hold + 2);
+}
+
+static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_dmn *clk = to_dmnclk(hw);
+ unsigned long fin;
+ unsigned ratio, wait, hold, reg;
+ unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+
+ fin = parent_rate;
+ ratio = fin / rate;
+
+ if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
+ return -EINVAL;
+
+ WARN_ON(fin % rate);
+
+ wait = (ratio >> 1) - 1;
+ hold = ratio - wait - 2;
+
+ reg = clkc_readl(clk->regofs);
+ reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
+ reg |= (wait << 16) | (hold << 20) | BIT(25);
+ clkc_writel(reg, clk->regofs);
+
+ /* waiting FCD been effective */
+ while (clkc_readl(clk->regofs) & BIT(25))
+ cpu_relax();
+
+ return 0;
+}
+
+static struct clk_ops msi_ops = {
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_mem_init = {
+ .name = "mem",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mem = {
+ .regofs = SIRFSOC_CLKC_MEM_CFG,
+ .hw = {
+ .init = &clk_mem_init,
+ },
+};
+
+static struct clk_init_data clk_sys_init = {
+ .name = "sys",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_GATE,
+};
+
+static struct clk_dmn clk_sys = {
+ .regofs = SIRFSOC_CLKC_SYS_CFG,
+ .hw = {
+ .init = &clk_sys_init,
+ },
+};
+
+static struct clk_init_data clk_io_init = {
+ .name = "io",
+ .ops = &msi_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_io = {
+ .regofs = SIRFSOC_CLKC_IO_CFG,
+ .hw = {
+ .init = &clk_io_init,
+ },
+};
+
+static struct clk_ops cpu_ops = {
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+static struct clk_init_data clk_cpu_init = {
+ .name = "cpu",
+ .ops = &cpu_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+ .flags = CLK_SET_RATE_PARENT,
+};
+
+static struct clk_dmn clk_cpu = {
+ .regofs = SIRFSOC_CLKC_CPU_CFG,
+ .hw = {
+ .init = &clk_cpu_init,
+ },
+};
+
+static struct clk_ops dmn_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .set_rate = dmn_clk_set_rate,
+ .round_rate = dmn_clk_round_rate,
+ .recalc_rate = dmn_clk_recalc_rate,
+ .set_parent = dmn_clk_set_parent,
+ .get_parent = dmn_clk_get_parent,
+};
+
+/* dsp, gfx, mm, lcd and vpp domain */
+
+static struct clk_init_data clk_dsp_init = {
+ .name = "dsp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_dsp = {
+ .regofs = SIRFSOC_CLKC_DSP_CFG,
+ .enable_bit = 0,
+ .hw = {
+ .init = &clk_dsp_init,
+ },
+};
+
+static struct clk_init_data clk_gfx_init = {
+ .name = "gfx",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_gfx = {
+ .regofs = SIRFSOC_CLKC_GFX_CFG,
+ .enable_bit = 8,
+ .hw = {
+ .init = &clk_gfx_init,
+ },
+};
+
+static struct clk_init_data clk_mm_init = {
+ .name = "mm",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mm = {
+ .regofs = SIRFSOC_CLKC_MM_CFG,
+ .enable_bit = 9,
+ .hw = {
+ .init = &clk_mm_init,
+ },
+};
+
+static struct clk_init_data clk_lcd_init = {
+ .name = "lcd",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_lcd = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 10,
+ .hw = {
+ .init = &clk_lcd_init,
+ },
+};
+
+static struct clk_init_data clk_vpp_init = {
+ .name = "vpp",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_vpp = {
+ .regofs = SIRFSOC_CLKC_LCD_CFG,
+ .enable_bit = 11,
+ .hw = {
+ .init = &clk_vpp_init,
+ },
+};
+
+static struct clk_init_data clk_mmc01_init = {
+ .name = "mmc01",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc01 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 59,
+ .hw = {
+ .init = &clk_mmc01_init,
+ },
+};
+
+static struct clk_init_data clk_mmc23_init = {
+ .name = "mmc23",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc23 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 60,
+ .hw = {
+ .init = &clk_mmc23_init,
+ },
+};
+
+static struct clk_init_data clk_mmc45_init = {
+ .name = "mmc45",
+ .ops = &dmn_ops,
+ .parent_names = dmn_clk_parents,
+ .num_parents = ARRAY_SIZE(dmn_clk_parents),
+};
+
+static struct clk_dmn clk_mmc45 = {
+ .regofs = SIRFSOC_CLKC_MMC_CFG,
+ .enable_bit = 61,
+ .hw = {
+ .init = &clk_mmc45_init,
+ },
+};
+
+/*
+ * peripheral controllers in io domain
+ */
+
+static int std_clk_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ return !!(clkc_readl(reg) & BIT(bit));
+}
+
+static int std_clk_enable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) | BIT(bit);
+ clkc_writel(val, reg);
+ return 0;
+}
+
+static void std_clk_disable(struct clk_hw *hw)
+{
+ u32 val, reg;
+ int bit;
+ struct clk_std *clk = to_stdclk(hw);
+
+ BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63);
+
+ bit = clk->enable_bit % 32;
+ reg = clk->enable_bit / 32;
+ reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg);
+
+ val = clkc_readl(reg) & ~BIT(bit);
+ clkc_writel(val, reg);
+}
+
+static const char *std_clk_io_parents[] = {
+ "io",
+};
+
+static struct clk_ops ios_ops = {
+ .is_enabled = std_clk_is_enabled,
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+};
+
+static struct clk_init_data clk_dmac0_init = {
+ .name = "dmac0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac0 = {
+ .enable_bit = 32,
+ .hw = {
+ .init = &clk_dmac0_init,
+ },
+};
+
+static struct clk_init_data clk_dmac1_init = {
+ .name = "dmac1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_dmac1 = {
+ .enable_bit = 33,
+ .hw = {
+ .init = &clk_dmac1_init,
+ },
+};
+
+static struct clk_init_data clk_nand_init = {
+ .name = "nand",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_nand = {
+ .enable_bit = 34,
+ .hw = {
+ .init = &clk_nand_init,
+ },
+};
+
+static struct clk_init_data clk_audio_init = {
+ .name = "audio",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_audio = {
+ .enable_bit = 35,
+ .hw = {
+ .init = &clk_audio_init,
+ },
+};
+
+static struct clk_init_data clk_uart0_init = {
+ .name = "uart0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart0 = {
+ .enable_bit = 36,
+ .hw = {
+ .init = &clk_uart0_init,
+ },
+};
+
+static struct clk_init_data clk_uart1_init = {
+ .name = "uart1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart1 = {
+ .enable_bit = 37,
+ .hw = {
+ .init = &clk_uart1_init,
+ },
+};
+
+static struct clk_init_data clk_uart2_init = {
+ .name = "uart2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_uart2 = {
+ .enable_bit = 38,
+ .hw = {
+ .init = &clk_uart2_init,
+ },
+};
+
+static struct clk_init_data clk_usp0_init = {
+ .name = "usp0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp0 = {
+ .enable_bit = 39,
+ .hw = {
+ .init = &clk_usp0_init,
+ },
+};
+
+static struct clk_init_data clk_usp1_init = {
+ .name = "usp1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp1 = {
+ .enable_bit = 40,
+ .hw = {
+ .init = &clk_usp1_init,
+ },
+};
+
+static struct clk_init_data clk_usp2_init = {
+ .name = "usp2",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_usp2 = {
+ .enable_bit = 41,
+ .hw = {
+ .init = &clk_usp2_init,
+ },
+};
+
+static struct clk_init_data clk_vip_init = {
+ .name = "vip",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_vip = {
+ .enable_bit = 42,
+ .hw = {
+ .init = &clk_vip_init,
+ },
+};
+
+static struct clk_init_data clk_spi0_init = {
+ .name = "spi0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi0 = {
+ .enable_bit = 43,
+ .hw = {
+ .init = &clk_spi0_init,
+ },
+};
+
+static struct clk_init_data clk_spi1_init = {
+ .name = "spi1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_spi1 = {
+ .enable_bit = 44,
+ .hw = {
+ .init = &clk_spi1_init,
+ },
+};
+
+static struct clk_init_data clk_tsc_init = {
+ .name = "tsc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_tsc = {
+ .enable_bit = 45,
+ .hw = {
+ .init = &clk_tsc_init,
+ },
+};
+
+static struct clk_init_data clk_i2c0_init = {
+ .name = "i2c0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c0 = {
+ .enable_bit = 46,
+ .hw = {
+ .init = &clk_i2c0_init,
+ },
+};
+
+static struct clk_init_data clk_i2c1_init = {
+ .name = "i2c1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_i2c1 = {
+ .enable_bit = 47,
+ .hw = {
+ .init = &clk_i2c1_init,
+ },
+};
+
+static struct clk_init_data clk_pwmc_init = {
+ .name = "pwmc",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pwmc = {
+ .enable_bit = 48,
+ .hw = {
+ .init = &clk_pwmc_init,
+ },
+};
+
+static struct clk_init_data clk_efuse_init = {
+ .name = "efuse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_efuse = {
+ .enable_bit = 49,
+ .hw = {
+ .init = &clk_efuse_init,
+ },
+};
+
+static struct clk_init_data clk_pulse_init = {
+ .name = "pulse",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_pulse = {
+ .enable_bit = 50,
+ .hw = {
+ .init = &clk_pulse_init,
+ },
+};
+
+static const char *std_clk_dsp_parents[] = {
+ "dsp",
+};
+
+static struct clk_init_data clk_gps_init = {
+ .name = "gps",
+ .ops = &ios_ops,
+ .parent_names = std_clk_dsp_parents,
+ .num_parents = ARRAY_SIZE(std_clk_dsp_parents),
+};
+
+static struct clk_std clk_gps = {
+ .enable_bit = 1,
+ .hw = {
+ .init = &clk_gps_init,
+ },
+};
+
+static struct clk_init_data clk_mf_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_io_parents,
+ .num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_mf = {
+ .enable_bit = 2,
+ .hw = {
+ .init = &clk_mf_init,
+ },
+};
+
+static const char *std_clk_sys_parents[] = {
+ "sys",
+};
+
+static struct clk_init_data clk_security_init = {
+ .name = "mf",
+ .ops = &ios_ops,
+ .parent_names = std_clk_sys_parents,
+ .num_parents = ARRAY_SIZE(std_clk_sys_parents),
+};
+
+static struct clk_std clk_security = {
+ .enable_bit = 19,
+ .hw = {
+ .init = &clk_security_init,
+ },
+};
+
+static const char *std_clk_usb_parents[] = {
+ "usb_pll",
+};
+
+static struct clk_init_data clk_usb0_init = {
+ .name = "usb0",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb0 = {
+ .enable_bit = 16,
+ .hw = {
+ .init = &clk_usb0_init,
+ },
+};
+
+static struct clk_init_data clk_usb1_init = {
+ .name = "usb1",
+ .ops = &ios_ops,
+ .parent_names = std_clk_usb_parents,
+ .num_parents = ARRAY_SIZE(std_clk_usb_parents),
+};
+
+static struct clk_std clk_usb1 = {
+ .enable_bit = 17,
+ .hw = {
+ .init = &clk_usb1_init,
+ },
+};
+
+static struct of_device_id clkc_ids[] = {
+ { .compatible = "sirf,prima2-clkc" },
+ {},
+};
+
+static struct of_device_id rsc_ids[] = {
+ { .compatible = "sirf,prima2-rsc" },
+ {},
+};
+
+void __init sirfsoc_of_clk_init(void)
+{
+ struct clk *clk;
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, clkc_ids);
+ if (!np)
+ panic("unable to find compatible clkc node in dtb\n");
+
+ sirfsoc_clk_vbase = of_iomap(np, 0);
+ if (!sirfsoc_clk_vbase)
+ panic("unable to map clkc registers\n");
+
+ of_node_put(np);
+
+ np = of_find_matching_node(NULL, rsc_ids);
+ if (!np)
+ panic("unable to find compatible rsc node in dtb\n");
+
+ sirfsoc_rsc_vbase = of_iomap(np, 0);
+ if (!sirfsoc_rsc_vbase)
+ panic("unable to map rsc registers\n");
+
+ of_node_put(np);
+
+
+ /* These are always available (RTC and 26MHz OSC)*/
+ clk = clk_register_fixed_rate(NULL, "rtc", NULL,
+ CLK_IS_ROOT, 32768);
+ BUG_ON(!clk);
+ clk = clk_register_fixed_rate(NULL, "osc", NULL,
+ CLK_IS_ROOT, 26000000);
+ BUG_ON(!clk);
+
+ clk = clk_register(NULL, &clk_pll1.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll2.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_pll3.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mem.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_sys.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_security.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b8030000.security");
+ clk = clk_register(NULL, &clk_dsp.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_gps.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a8010000.gps");
+ clk = clk_register(NULL, &clk_mf.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_io.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "io");
+ clk = clk_register(NULL, &clk_cpu.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "cpu");
+ clk = clk_register(NULL, &clk_uart0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0050000.uart");
+ clk = clk_register(NULL, &clk_uart1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0060000.uart");
+ clk = clk_register(NULL, &clk_uart2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0070000.uart");
+ clk = clk_register(NULL, &clk_tsc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0110000.tsc");
+ clk = clk_register(NULL, &clk_i2c0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.i2c");
+ clk = clk_register(NULL, &clk_i2c1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.i2c");
+ clk = clk_register(NULL, &clk_spi0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00d0000.spi");
+ clk = clk_register(NULL, &clk_spi1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0170000.spi");
+ clk = clk_register(NULL, &clk_pwmc.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0130000.pwm");
+ clk = clk_register(NULL, &clk_efuse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0140000.efusesys");
+ clk = clk_register(NULL, &clk_pulse.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0150000.pulsec");
+ clk = clk_register(NULL, &clk_dmac0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
+ clk = clk_register(NULL, &clk_dmac1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
+ clk = clk_register(NULL, &clk_nand.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0030000.nand");
+ clk = clk_register(NULL, &clk_audio.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0040000.audio");
+ clk = clk_register(NULL, &clk_usp0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0080000.usp");
+ clk = clk_register(NULL, &clk_usp1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b0090000.usp");
+ clk = clk_register(NULL, &clk_usp2.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00a0000.usp");
+ clk = clk_register(NULL, &clk_vip.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00c0000.vip");
+ clk = clk_register(NULL, &clk_gfx.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "98000000.graphics");
+ clk = clk_register(NULL, &clk_mm.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "a0000000.multimedia");
+ clk = clk_register(NULL, &clk_lcd.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90010000.display");
+ clk = clk_register(NULL, &clk_vpp.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "90020000.vpp");
+ clk = clk_register(NULL, &clk_mmc01.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc23.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_mmc45.hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &usb_pll_clk_hw);
+ BUG_ON(!clk);
+ clk = clk_register(NULL, &clk_usb0.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00e0000.usb");
+ clk = clk_register(NULL, &clk_usb1.hw);
+ BUG_ON(!clk);
+ clk_register_clkdev(clk, NULL, "b00f0000.usb");
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index efdfd00..56e4495e 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -558,25 +558,6 @@
EXPORT_SYMBOL_GPL(clk_enable);
/**
- * clk_get_rate - return the rate of clk
- * @clk: the clk whose rate is being returned
- *
- * Simply returns the cached rate of the clk. Does not query the hardware. If
- * clk is NULL then returns 0.
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- mutex_lock(&prepare_lock);
- rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
-
- return rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/**
* __clk_round_rate - round the given rate for a clk
* @clk: round the rate of this clock
*
@@ -702,6 +683,30 @@
}
/**
+ * clk_get_rate - return the rate of clk
+ * @clk: the clk whose rate is being returned
+ *
+ * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
+ * is set, which means a recalc_rate will be issued.
+ * If clk is NULL then returns 0.
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ mutex_lock(&prepare_lock);
+
+ if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
+ __clk_recalc_rates(clk, 0);
+
+ rate = __clk_get_rate(clk);
+ mutex_unlock(&prepare_lock);
+
+ return rate;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+/**
* __clk_speculate_rates
* @clk: first clk in the subtree
* @parent_rate: the "future" rate of clk's parent
@@ -1582,6 +1587,20 @@
}
EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct clk_onecell_data *clk_data = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= clk_data->clk_num) {
+ pr_err("%s: invalid clock index %d\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return clk_data->clks[idx];
+}
+EXPORT_SYMBOL_GPL(of_clk_src_onecell_get);
+
/**
* of_clk_add_provider() - Register a clock provider for a node
* @np: Device node pointer associated with clock provider
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
new file mode 100644
index 0000000..392d780
--- /dev/null
+++ b/drivers/clk/mmp/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for mmp specific clk
+#
+
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+
+obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/clk-apbc.c b/drivers/clk/mmp/clk-apbc.c
new file mode 100644
index 0000000..d14120e
--- /dev/null
+++ b/drivers/clk/mmp/clk-apbc.c
@@ -0,0 +1,152 @@
+/*
+ * mmp APB clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+#define APBC_POWER (1 << 7) /* Reset Generation */
+
+#define to_clk_apbc(hw) container_of(hw, struct clk_apbc, hw)
+struct clk_apbc {
+ struct clk_hw hw;
+ void __iomem *base;
+ unsigned int delay;
+ unsigned int flags;
+ spinlock_t *lock;
+};
+
+static int clk_apbc_prepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned int data;
+ unsigned long flags = 0;
+
+ /*
+ * It may share same register as MUX clock,
+ * and it will impact FNCLK enable. Spinlock is needed
+ */
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data |= APBC_POWER;
+ data |= APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data |= APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(apbc->delay);
+
+ if (!(apbc->flags & APBC_NO_BUS_CTRL)) {
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_RST;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+ }
+
+ return 0;
+}
+
+static void clk_apbc_unprepare(struct clk_hw *hw)
+{
+ struct clk_apbc *apbc = to_clk_apbc(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ if (apbc->flags & APBC_POWER_CTRL)
+ data &= ~APBC_POWER;
+ data &= ~APBC_FNCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+
+ udelay(10);
+
+ if (apbc->lock)
+ spin_lock_irqsave(apbc->lock, flags);
+
+ data = readl_relaxed(apbc->base);
+ data &= ~APBC_APBCLK;
+ writel_relaxed(data, apbc->base);
+
+ if (apbc->lock)
+ spin_unlock_irqrestore(apbc->lock, flags);
+}
+
+struct clk_ops clk_apbc_ops = {
+ .prepare = clk_apbc_prepare,
+ .unprepare = clk_apbc_unprepare,
+};
+
+struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name,
+ void __iomem *base, unsigned int delay,
+ unsigned int apbc_flags, spinlock_t *lock)
+{
+ struct clk_apbc *apbc;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apbc = kzalloc(sizeof(*apbc), GFP_KERNEL);
+ if (!apbc)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apbc_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apbc->base = base;
+ apbc->delay = delay;
+ apbc->flags = apbc_flags;
+ apbc->lock = lock;
+ apbc->hw.init = &init;
+
+ clk = clk_register(NULL, &apbc->hw);
+ if (IS_ERR(clk))
+ kfree(apbc);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-apmu.c b/drivers/clk/mmp/clk-apmu.c
new file mode 100644
index 0000000..abe182b
--- /dev/null
+++ b/drivers/clk/mmp/clk-apmu.c
@@ -0,0 +1,97 @@
+/*
+ * mmp AXI peripharal clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+#define to_clk_apmu(clk) (container_of(clk, struct clk_apmu, clk))
+struct clk_apmu {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 rst_mask;
+ u32 enable_mask;
+ spinlock_t *lock;
+};
+
+static int clk_apmu_enable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) | apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+
+ return 0;
+}
+
+static void clk_apmu_disable(struct clk_hw *hw)
+{
+ struct clk_apmu *apmu = to_clk_apmu(hw);
+ unsigned long data;
+ unsigned long flags = 0;
+
+ if (apmu->lock)
+ spin_lock_irqsave(apmu->lock, flags);
+
+ data = readl_relaxed(apmu->base) & ~apmu->enable_mask;
+ writel_relaxed(data, apmu->base);
+
+ if (apmu->lock)
+ spin_unlock_irqrestore(apmu->lock, flags);
+}
+
+struct clk_ops clk_apmu_ops = {
+ .enable = clk_apmu_enable,
+ .disable = clk_apmu_disable,
+};
+
+struct clk *mmp_clk_register_apmu(const char *name, const char *parent_name,
+ void __iomem *base, u32 enable_mask, spinlock_t *lock)
+{
+ struct clk_apmu *apmu;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ apmu = kzalloc(sizeof(*apmu), GFP_KERNEL);
+ if (!apmu)
+ return NULL;
+
+ init.name = name;
+ init.ops = &clk_apmu_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ apmu->base = base;
+ apmu->enable_mask = enable_mask;
+ apmu->lock = lock;
+ apmu->hw.init = &init;
+
+ clk = clk_register(NULL, &apmu->hw);
+
+ if (IS_ERR(clk))
+ kfree(apmu);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
new file mode 100644
index 0000000..80c1dd1
--- /dev/null
+++ b/drivers/clk/mmp/clk-frac.c
@@ -0,0 +1,153 @@
+/*
+ * mmp factor clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include "clk.h"
+/*
+ * It is M/N clock
+ *
+ * Fout from synthesizer can be given from two equations:
+ * numerator/denominator = Fin / (Fout * factor)
+ */
+
+#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw)
+struct clk_factor {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct clk_factor_masks *masks;
+ struct clk_factor_tbl *ftbl;
+ unsigned int ftbl_cnt;
+};
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ unsigned long rate = 0, prev_rate;
+ int i;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((*prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i == 0)
+ return rate;
+ else
+ return prev_rate;
+}
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ unsigned int val, num, den;
+
+ val = readl_relaxed(factor->base);
+
+ /* calculate numerator */
+ num = (val >> masks->num_shift) & masks->num_mask;
+
+ /* calculate denominator */
+ den = (val >> masks->den_shift) & masks->num_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * den) /
+ (num * factor->masks->factor)) * 10000;
+}
+
+/* Configures new clock rate*/
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_factor *factor = to_clk_factor(hw);
+ struct clk_factor_masks *masks = factor->masks;
+ int i;
+ unsigned long val;
+ unsigned long prev_rate, rate = 0;
+
+ for (i = 0; i < factor->ftbl_cnt; i++) {
+ prev_rate = rate;
+ rate = (((prate / 10000) * factor->ftbl[i].num) /
+ (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+ if (rate > drate)
+ break;
+ }
+ if (i > 0)
+ i--;
+
+ val = readl_relaxed(factor->base);
+
+ val &= ~(masks->num_mask << masks->num_shift);
+ val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+
+ val &= ~(masks->den_mask << masks->den_shift);
+ val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+
+ writel_relaxed(val, factor->base);
+
+ return 0;
+}
+
+static struct clk_ops clk_factor_ops = {
+ .recalc_rate = clk_factor_recalc_rate,
+ .round_rate = clk_factor_round_rate,
+ .set_rate = clk_factor_set_rate,
+};
+
+struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *base,
+ struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl,
+ unsigned int ftbl_cnt)
+{
+ struct clk_factor *factor;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!masks) {
+ pr_err("%s: must pass a clk_factor_mask\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ factor = kzalloc(sizeof(*factor), GFP_KERNEL);
+ if (!factor) {
+ pr_err("%s: could not allocate factor clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ factor->base = base;
+ factor->masks = masks;
+ factor->ftbl = ftbl;
+ factor->ftbl_cnt = ftbl_cnt;
+ factor->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_factor_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &factor->hw);
+ if (IS_ERR_OR_NULL(clk))
+ kfree(factor);
+
+ return clk;
+}
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
new file mode 100644
index 0000000..ade4358
--- /dev/null
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -0,0 +1,449 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x0
+#define APBC_TWSI0 0x4
+#define APBC_TWSI1 0x8
+#define APBC_TWSI2 0xc
+#define APBC_TWSI3 0x10
+#define APBC_TWSI4 0x7c
+#define APBC_TWSI5 0x80
+#define APBC_KPC 0x18
+#define APBC_UART0 0x2c
+#define APBC_UART1 0x30
+#define APBC_UART2 0x34
+#define APBC_UART3 0x88
+#define APBC_GPIO 0x38
+#define APBC_PWM0 0x3c
+#define APBC_PWM1 0x40
+#define APBC_PWM2 0x44
+#define APBC_PWM3 0x48
+#define APBC_SSP0 0x50
+#define APBC_SSP1 0x54
+#define APBC_SSP2 0x58
+#define APBC_SSP3 0x5c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_SDH2 0xe8
+#define APMU_SDH3 0xec
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_DISP1 0x110
+#define APMU_CCIC0 0x50
+#define APMU_CCIC1 0xf4
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 14634, .den = 2165}, /*14.745MHZ */
+ {.num = 3521, .den = 689}, /*19.23MHZ */
+ {.num = 9679, .den = 5728}, /*58.9824MHZ */
+ {.num = 15850, .den = 9451}, /*59.429MHZ */
+};
+
+static const char *uart_parent[] = {"uart_pll", "vctcxo"};
+static const char *ssp_parent[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
+
+void __init mmp2_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *vctcxo;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ vctcxo = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(vctcxo, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 800000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "usb_pll", NULL, CLK_IS_ROOT,
+ 480000000);
+ clk_register_clkdev(clk, "usb_pll", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll2", NULL, CLK_IS_ROOT,
+ 960000000);
+ clk_register_clkdev(clk, "pll2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_20", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 5);
+ clk_register_clkdev(clk, "pll1_20", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3", "pll1",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_2", "pll2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_4", "pll2_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_8", "pll2_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_16", "pll2_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_3", "pll2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll2_3", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_6", "pll2_3",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll2_12", "pll2_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll2_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_2", "vctcxo",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "vctcxo_4", "vctcxo_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "vctcxo_4", NULL);
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(clk, 14745600);
+ clk_register_clkdev(clk, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "vctcxo",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "vctcxo",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("twsi2", "vctcxo",
+ apbc_base + APBC_TWSI2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.2");
+
+ clk = mmp_clk_register_apbc("twsi3", "vctcxo",
+ apbc_base + APBC_TWSI3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.3");
+
+ clk = mmp_clk_register_apbc("twsi4", "vctcxo",
+ apbc_base + APBC_TWSI4, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.4");
+
+ clk = mmp_clk_register_apbc("twsi5", "vctcxo",
+ apbc_base + APBC_TWSI5, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.5");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "vctcxo",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "vctcxo",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "vctcxo",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "vctcxo",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp2-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "uart3_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART3, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, vctcxo);
+ clk_register_clkdev(clk, "uart_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("uart3", "uart3_mux",
+ apbc_base + APBC_UART3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.3");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp2_mux",
+ apbc_base + APBC_SSP2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp3_mux",
+ apbc_base + APBC_SSP3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "sdh_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 8, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh_mux", NULL);
+
+ clk = clk_register_divider(NULL, "sdh_div", "sdh_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_SDH0,
+ 10, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "sdh_div", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_div", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.0");
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh_div", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.1");
+
+ clk = mmp_clk_register_apmu("sdh2", "sdh_div", apmu_base + APMU_SDH2,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.2");
+
+ clk = mmp_clk_register_apmu("sdh3", "sdh_div", apmu_base + APMU_SDH3,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxav3.3");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "disp0_div", "disp0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP0,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_div",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_divider(NULL, "disp0_sphy_div", "disp0_mux", 0,
+ apmu_base + APMU_DISP0, 15, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0_sphy", "disp0_sphy_div",
+ apmu_base + APMU_DISP0, 0x1024, &clk_lock);
+ clk_register_clkdev(clk, "disp_sphy.0", NULL);
+
+ clk = clk_register_mux(NULL, "disp1_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "disp1_div", "disp1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_DISP1,
+ 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "disp_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("disp1", "disp1_div",
+ apmu_base + APMU_DISP1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.1");
+
+ clk = mmp_clk_register_apmu("ccic_arbiter", "vctcxo",
+ apmu_base + APMU_CCIC0, 0x1800, &clk_lock);
+ clk_register_clkdev(clk, "ccic_arbiter", NULL);
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = clk_register_divider(NULL, "ccic0_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 17, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_div",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.0");
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic1_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC1, 6, 2, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.1", NULL);
+
+ clk = clk_register_divider(NULL, "ccic1_div", "ccic1_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 16, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+ clk_register_clkdev(clk, "ccic_div.1", NULL);
+
+ clk = mmp_clk_register_apmu("ccic1", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_phy", "ccic1_div",
+ apmu_base + APMU_CCIC1, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.1");
+
+ clk = clk_register_divider(NULL, "ccic1_sphy_div", "ccic1_div",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.1");
+
+ clk = mmp_clk_register_apmu("ccic1_sphy", "ccic1_sphy_div",
+ apmu_base + APMU_CCIC1, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.1");
+}
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
new file mode 100644
index 0000000..e8d036c
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -0,0 +1,346 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x81c
+#define APBC_SSP1 0x820
+#define APBC_SSP2 0x84c
+#define APBC_SSP3 0x858
+#define APBC_SSP4 0x85c
+#define APBC_TWSI1 0x6c
+#define APBC_UART2 0x70
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa168_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa168-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbc_base + APBC_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+
+ clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.3", NULL);
+
+ clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+
+ clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.4", NULL);
+
+ clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4,
+ 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.4");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC,
+ 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1,
+ 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+ 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB,
+ 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-disp.0");
+
+ clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "hclk", "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
new file mode 100644
index 0000000..7048c31
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -0,0 +1,320 @@
+/*
+ * pxa910 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <mach/addr-map.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x18
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_SSP2 0x4c
+#define APBCP_TWSI1 0x28
+#define APBCP_UART2 0x1c
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static struct clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+
+void __init pxa910_clk_init(void)
+{
+ struct clk *clk;
+ struct clk *uart_pll;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbcp_base;
+ void __iomem *apbc_base;
+
+ mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+ if (mpmu_base == NULL) {
+ pr_err("error to ioremap MPMU base\n");
+ return;
+ }
+
+ apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+ if (apmu_base == NULL) {
+ pr_err("error to ioremap APMU base\n");
+ return;
+ }
+
+ apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+ if (apbcp_base == NULL) {
+ pr_err("error to ioremap APBC extension base\n");
+ return;
+ }
+
+ apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+ if (apbc_base == NULL) {
+ pr_err("error to ioremap APBC base\n");
+ return;
+ }
+
+ clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+ clk_register_clkdev(clk, "clk32", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk_register_clkdev(clk, "vctcxo", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+ 624000000);
+ clk_register_clkdev(clk, "pll1", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_2", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_4", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_8", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_16", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+ CLK_SET_RATE_PARENT, 1, 3);
+ clk_register_clkdev(clk, "pll1_6", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_12", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_24", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_48", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll1_96", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+ CLK_SET_RATE_PARENT, 1, 13);
+ clk_register_clkdev(clk, "pll1_13", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+ CLK_SET_RATE_PARENT, 2, 3);
+ clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+ CLK_SET_RATE_PARENT, 3, 16);
+ clk_register_clkdev(clk, "pll1_3_16", NULL);
+
+ uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+ mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl));
+ clk_set_rate(uart_pll, 14745600);
+ clk_register_clkdev(uart_pll, "uart_pll", NULL);
+
+ clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+ apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+
+ clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+ apbcp_base + APBCP_TWSI1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+
+ clk = mmp_clk_register_apbc("gpio", "vctcxo",
+ apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa-gpio");
+
+ clk = mmp_clk_register_apbc("kpc", "clk32",
+ apbc_base + APBC_KPC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+
+ clk = mmp_clk_register_apbc("rtc", "clk32",
+ apbc_base + APBC_RTC, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sa1100-rtc");
+
+ clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+ apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.0");
+
+ clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+ apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.1");
+
+ clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+ apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.2");
+
+ clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+ apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa910-pwm.3");
+
+ clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+ apbc_base + APBC_UART0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+
+ clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+ apbc_base + APBC_UART1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+
+ clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+ ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+ apbcp_base + APBCP_UART2, 4, 3, 0, &clk_lock);
+ clk_set_parent(clk, uart_pll);
+ clk_register_clkdev(clk, "uart_mux.2", NULL);
+
+ clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+ apbcp_base + APBCP_UART2, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+
+ clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "uart_mux.0", NULL);
+
+ clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+ apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+
+ clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+ ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+ apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+ clk_register_clkdev(clk, "ssp_mux.1", NULL);
+
+ clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+ apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+
+ clk = mmp_clk_register_apmu("dfc", "pll1_4",
+ apmu_base + APMU_DFC, 0x19b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+
+ clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh0_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh0", "sdh_mux",
+ apmu_base + APMU_SDH0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+
+ clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+ ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "sdh1_mux", NULL);
+
+ clk = mmp_clk_register_apmu("sdh1", "sdh1_mux",
+ apmu_base + APMU_SDH1, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+
+ clk = mmp_clk_register_apmu("usb", "usb_pll",
+ apmu_base + APMU_USB, 0x9, &clk_lock);
+ clk_register_clkdev(clk, "usb_clk", NULL);
+
+ clk = mmp_clk_register_apmu("sph", "usb_pll",
+ apmu_base + APMU_USB, 0x12, &clk_lock);
+ clk_register_clkdev(clk, "sph_clk", NULL);
+
+ clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+ ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "disp_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+ apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, NULL, "mmp-disp.0");
+
+ clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+ ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+ apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+ apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+ clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+
+ clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+ ARRAY_SIZE(ccic_phy_parent),
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 7, 1, 0, &clk_lock);
+ clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+ apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+ clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+
+ clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+ CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+ 10, 5, 0, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk_div", NULL);
+
+ clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+ apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+ clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
new file mode 100644
index 0000000..ab86dd4
--- /dev/null
+++ b/drivers/clk/mmp/clk.h
@@ -0,0 +1,35 @@
+#ifndef __MACH_MMP_CLK_H
+#define __MACH_MMP_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define APBC_NO_BUS_CTRL BIT(0)
+#define APBC_POWER_CTRL BIT(1)
+
+struct clk_factor_masks {
+ unsigned int factor;
+ unsigned int num_mask;
+ unsigned int den_mask;
+ unsigned int num_shift;
+ unsigned int den_shift;
+};
+
+struct clk_factor_tbl {
+ unsigned int num;
+ unsigned int den;
+};
+
+extern struct clk *mmp_clk_register_pll2(const char *name,
+ const char *parent_name, unsigned long flags);
+extern struct clk *mmp_clk_register_apbc(const char *name,
+ const char *parent_name, void __iomem *base,
+ unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
+extern struct clk *mmp_clk_register_apmu(const char *name,
+ const char *parent_name, void __iomem *base, u32 enable_mask,
+ spinlock_t *lock);
+extern struct clk *mmp_clk_register_factor(const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *base, struct clk_factor_masks *masks,
+ struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+#endif
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index 844043a..9f6d155 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <mach/mx23.h>
#include "clk.h"
@@ -71,44 +72,6 @@
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] = {
- { .dev_id = "duart", },
- { .dev_id = "mxs-auart.0", },
- { .dev_id = "mxs-auart.1", },
- { .dev_id = "8006c000.serial", },
- { .dev_id = "8006e000.serial", },
- { .dev_id = "80070000.serial", },
-};
-
-static struct clk_lookup hbus_lookups[] = {
- { .dev_id = "imx23-dma-apbh", },
- { .dev_id = "80004000.dma-apbh", },
-};
-
-static struct clk_lookup xbus_lookups[] = {
- { .dev_id = "duart", .con_id = "apb_pclk"},
- { .dev_id = "80070000.serial", .con_id = "apb_pclk"},
- { .dev_id = "imx23-dma-apbx", },
- { .dev_id = "80024000.dma-apbx", },
-};
-
-static struct clk_lookup ssp_lookups[] = {
- { .dev_id = "imx23-mmc.0", },
- { .dev_id = "imx23-mmc.1", },
- { .dev_id = "80010000.ssp", },
- { .dev_id = "80034000.ssp", },
-};
-
-static struct clk_lookup lcdif_lookups[] = {
- { .dev_id = "imx23-fb", },
- { .dev_id = "80030000.lcdif", },
-};
-
-static struct clk_lookup gpmi_lookups[] = {
- { .dev_id = "imx23-gpmi-nand", },
- { .dev_id = "8000c000.gpmi-nand", },
-};
-
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", };
@@ -127,6 +90,7 @@
};
static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
static enum imx23_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
@@ -134,6 +98,7 @@
int __init mx23_clocks_init(void)
{
+ struct device_node *np;
int i;
clk_misc_init();
@@ -188,14 +153,14 @@
return PTR_ERR(clks[i]);
}
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+ if (np) {
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clks[clk32k], NULL, "timrot");
- clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
- clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
- clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
- clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
- clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups));
- clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
- clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index e3aab67..613e76f 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/common.h>
#include <mach/mx28.h>
#include "clk.h"
@@ -120,90 +121,6 @@
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] = {
- { .dev_id = "duart", },
- { .dev_id = "mxs-auart.0", },
- { .dev_id = "mxs-auart.1", },
- { .dev_id = "mxs-auart.2", },
- { .dev_id = "mxs-auart.3", },
- { .dev_id = "mxs-auart.4", },
- { .dev_id = "8006a000.serial", },
- { .dev_id = "8006c000.serial", },
- { .dev_id = "8006e000.serial", },
- { .dev_id = "80070000.serial", },
- { .dev_id = "80072000.serial", },
- { .dev_id = "80074000.serial", },
-};
-
-static struct clk_lookup hbus_lookups[] = {
- { .dev_id = "imx28-dma-apbh", },
- { .dev_id = "80004000.dma-apbh", },
-};
-
-static struct clk_lookup xbus_lookups[] = {
- { .dev_id = "duart", .con_id = "apb_pclk"},
- { .dev_id = "80074000.serial", .con_id = "apb_pclk"},
- { .dev_id = "imx28-dma-apbx", },
- { .dev_id = "80024000.dma-apbx", },
-};
-
-static struct clk_lookup ssp0_lookups[] = {
- { .dev_id = "imx28-mmc.0", },
- { .dev_id = "80010000.ssp", },
-};
-
-static struct clk_lookup ssp1_lookups[] = {
- { .dev_id = "imx28-mmc.1", },
- { .dev_id = "80012000.ssp", },
-};
-
-static struct clk_lookup ssp2_lookups[] = {
- { .dev_id = "imx28-mmc.2", },
- { .dev_id = "80014000.ssp", },
-};
-
-static struct clk_lookup ssp3_lookups[] = {
- { .dev_id = "imx28-mmc.3", },
- { .dev_id = "80016000.ssp", },
-};
-
-static struct clk_lookup lcdif_lookups[] = {
- { .dev_id = "imx28-fb", },
- { .dev_id = "80030000.lcdif", },
-};
-
-static struct clk_lookup gpmi_lookups[] = {
- { .dev_id = "imx28-gpmi-nand", },
- { .dev_id = "8000c000.gpmi-nand", },
-};
-
-static struct clk_lookup fec_lookups[] = {
- { .dev_id = "imx28-fec.0", },
- { .dev_id = "imx28-fec.1", },
- { .dev_id = "800f0000.ethernet", },
- { .dev_id = "800f4000.ethernet", },
-};
-
-static struct clk_lookup can0_lookups[] = {
- { .dev_id = "flexcan.0", },
- { .dev_id = "80032000.can", },
-};
-
-static struct clk_lookup can1_lookups[] = {
- { .dev_id = "flexcan.1", },
- { .dev_id = "80034000.can", },
-};
-
-static struct clk_lookup saif0_lookups[] = {
- { .dev_id = "mxs-saif.0", },
- { .dev_id = "80042000.saif", },
-};
-
-static struct clk_lookup saif1_lookups[] = {
- { .dev_id = "mxs-saif.1", },
- { .dev_id = "80046000.saif", },
-};
-
static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", };
static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", };
@@ -228,6 +145,7 @@
};
static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
static enum imx28_clk clks_init_on[] __initdata = {
cpu, hbus, xbus, emi, uart,
@@ -235,6 +153,7 @@
int __init mx28_clocks_init(void)
{
+ struct device_node *np;
int i;
clk_misc_init();
@@ -312,27 +231,15 @@
return PTR_ERR(clks[i]);
}
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+ if (np) {
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
clk_register_clkdev(clks[clk32k], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
- clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
- clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
- clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
- clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
- clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
- clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
- clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
- clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
- clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
- clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
- clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
- clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
- clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
- clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
- clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
- clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy");
- clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy");
- clk_register_clkdev(clks[usb0], NULL, "80080000.usb");
- clk_register_clkdev(clks[usb1], NULL, "80090000.usb");
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
new file mode 100644
index 0000000..858fbfe
--- /dev/null
+++ b/drivers/clk/ux500/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for ux500 clocks
+#
+
+# Clock types
+obj-y += clk-prcc.o
+obj-y += clk-prcmu.o
+
+# Clock definitions
+obj-y += u8500_clk.o
+obj-y += u9540_clk.o
+obj-y += u8540_clk.o
diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c
new file mode 100644
index 0000000..7eee7f7
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcc.c
@@ -0,0 +1,164 @@
+/*
+ * PRCC clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <mach/hardware.h>
+
+#include "clk.h"
+
+#define PRCC_PCKEN 0x000
+#define PRCC_PCKDIS 0x004
+#define PRCC_KCKEN 0x008
+#define PRCC_KCKDIS 0x00C
+#define PRCC_PCKSR 0x010
+#define PRCC_KCKSR 0x014
+
+#define to_clk_prcc(_hw) container_of(_hw, struct clk_prcc, hw)
+
+struct clk_prcc {
+ struct clk_hw hw;
+ void __iomem *base;
+ u32 cg_sel;
+ int is_enabled;
+};
+
+/* PRCC clock operations. */
+
+static int clk_prcc_pclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKEN));
+ while (!(readl(clk->base + PRCC_PCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_pclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_PCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_kclk_enable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKEN));
+ while (!(readl(clk->base + PRCC_KCKSR) & clk->cg_sel))
+ cpu_relax();
+
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcc_kclk_disable(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+
+ writel(clk->cg_sel, (clk->base + PRCC_KCKDIS));
+ clk->is_enabled = 0;
+}
+
+static int clk_prcc_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcc *clk = to_clk_prcc(hw);
+ return clk->is_enabled;
+}
+
+static struct clk_ops clk_prcc_pclk_ops = {
+ .enable = clk_prcc_pclk_enable,
+ .disable = clk_prcc_pclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk_ops clk_prcc_kclk_ops = {
+ .enable = clk_prcc_kclk_enable,
+ .disable = clk_prcc_kclk_disable,
+ .is_enabled = clk_prcc_is_enabled,
+};
+
+static struct clk *clk_reg_prcc(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags,
+ struct clk_ops *clk_prcc_ops)
+{
+ struct clk_prcc *clk;
+ struct clk_init_data clk_prcc_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcc: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcc), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcc: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->base = ioremap(phy_base, SZ_4K);
+ if (!clk->base)
+ goto free_clk;
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+
+ clk_prcc_init.name = name;
+ clk_prcc_init.ops = clk_prcc_ops;
+ clk_prcc_init.flags = flags;
+ clk_prcc_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcc_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcc_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto unmap_clk;
+
+ return clk_reg;
+
+unmap_clk:
+ iounmap(clk->base);
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcc: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_pclk_ops);
+}
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ resource_size_t phy_base,
+ u32 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+ &clk_prcc_kclk_ops);
+}
diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
new file mode 100644
index 0000000..930cdfe
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -0,0 +1,252 @@
+/*
+ * PRCMU clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw)
+
+struct clk_prcmu {
+ struct clk_hw hw;
+ u8 cg_sel;
+ int is_enabled;
+};
+
+/* PRCMU clock operations. */
+
+static int clk_prcmu_prepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_request_clock(clk->cg_sel, true);
+}
+
+static void clk_prcmu_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ if (prcmu_request_clock(clk->cg_sel, false))
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static int clk_prcmu_enable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 1;
+ return 0;
+}
+
+static void clk_prcmu_disable(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ clk->is_enabled = 0;
+}
+
+static int clk_prcmu_is_enabled(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_enabled;
+}
+
+static unsigned long clk_prcmu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_clock_rate(clk->cg_sel);
+}
+
+static long clk_prcmu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_round_clock_rate(clk->cg_sel, rate);
+}
+
+static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return prcmu_set_clock_rate(clk->cg_sel, rate);
+}
+
+static int request_ape_opp100(bool enable)
+{
+ static int reqs;
+ int err = 0;
+
+ if (enable) {
+ if (!reqs)
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ "clock", 100);
+ if (!err)
+ reqs++;
+ } else {
+ reqs--;
+ if (!reqs)
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ "clock");
+ }
+ return err;
+}
+
+static int clk_prcmu_opp_prepare(struct clk_hw *hw)
+{
+ int err;
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ err = request_ape_opp100(true);
+ if (err) {
+ pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
+ __func__, hw->init->name);
+ return err;
+ }
+
+ err = prcmu_request_clock(clk->cg_sel, true);
+ if (err)
+ request_ape_opp100(false);
+
+ return err;
+}
+
+static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ if (prcmu_request_clock(clk->cg_sel, false))
+ goto out_error;
+ if (request_ape_opp100(false))
+ goto out_error;
+ return;
+
+out_error:
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
+static struct clk_ops clk_prcmu_scalable_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+ .round_rate = clk_prcmu_round_rate,
+ .set_rate = clk_prcmu_set_rate,
+};
+
+static struct clk_ops clk_prcmu_gate_ops = {
+ .prepare = clk_prcmu_prepare,
+ .unprepare = clk_prcmu_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_rate_ops = {
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk_ops clk_prcmu_opp_gate_ops = {
+ .prepare = clk_prcmu_opp_prepare,
+ .unprepare = clk_prcmu_opp_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+};
+
+static struct clk *clk_reg_prcmu(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags,
+ struct clk_ops *clk_prcmu_ops)
+{
+ struct clk_prcmu *clk;
+ struct clk_init_data clk_prcmu_init;
+ struct clk *clk_reg;
+
+ if (!name) {
+ pr_err("clk_prcmu: %s invalid arguments passed\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ clk = kzalloc(sizeof(struct clk_prcmu), GFP_KERNEL);
+ if (!clk) {
+ pr_err("clk_prcmu: %s could not allocate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->cg_sel = cg_sel;
+ clk->is_enabled = 1;
+ /* "rate" can be used for changing the initial frequency */
+ if (rate)
+ prcmu_set_clock_rate(cg_sel, rate);
+
+ clk_prcmu_init.name = name;
+ clk_prcmu_init.ops = clk_prcmu_ops;
+ clk_prcmu_init.flags = flags;
+ clk_prcmu_init.parent_names = (parent_name ? &parent_name : NULL);
+ clk_prcmu_init.num_parents = (parent_name ? 1 : 0);
+ clk->hw.init = &clk_prcmu_init;
+
+ clk_reg = clk_register(NULL, &clk->hw);
+ if (IS_ERR_OR_NULL(clk_reg))
+ goto free_clk;
+
+ return clk_reg;
+
+free_clk:
+ kfree(clk);
+ pr_err("clk_prcmu: %s failed to register clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+}
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+ &clk_prcmu_scalable_ops);
+}
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_gate_ops);
+}
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_rate_ops);
+}
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+ &clk_prcmu_opp_gate_ops);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
new file mode 100644
index 0000000..836d7d1
--- /dev/null
+++ b/drivers/clk/ux500/clk.h
@@ -0,0 +1,48 @@
+/*
+ * Clocks for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __UX500_CLK_H
+#define __UX500_CLK_H
+
+#include <linux/clk.h>
+
+struct clk *clk_reg_prcc_pclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcc_kclk(const char *name,
+ const char *parent_name,
+ unsigned int phy_base,
+ u32 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_rate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long flags);
+
+#endif /* __UX500_CLK_H */
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
new file mode 100644
index 0000000..ca4a25e
--- /dev/null
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -0,0 +1,477 @@
+/*
+ * Clock definitions for u8500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8500_clk_init(void)
+{
+ struct prcmu_fw_version *fw_version;
+ const char *sgaclk_parent = NULL;
+ struct clk *clk;
+
+ /* Clock sources */
+ clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc0_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "soc1_pll", NULL);
+
+ clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, "ddr_pll", NULL);
+
+ /* FIXME: Add sys, ulp and int clocks here. */
+
+ clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
+ CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+ 32768);
+ clk_register_clkdev(clk, "clk32k", NULL);
+ clk_register_clkdev(clk, NULL, "rtc-pl031");
+
+ /* PRCMU clocks */
+ fw_version = prcmu_get_fw_version();
+ if (fw_version != NULL) {
+ switch (fw_version->project) {
+ case PRCMU_FW_PROJECT_U8500_C2:
+ case PRCMU_FW_PROJECT_U8520:
+ case PRCMU_FW_PROJECT_U8420:
+ sgaclk_parent = "soc0_pll";
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (sgaclk_parent)
+ clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
+ PRCMU_SGACLK, 0);
+ else
+ clk = clk_reg_prcmu_gate("sgclk", NULL,
+ PRCMU_SGACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mali");
+
+ clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "UART");
+
+ clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP02");
+
+ clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "MSP1");
+
+ clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "I2C");
+
+ clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "slim");
+
+ clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH1");
+
+ clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH2");
+
+ clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH3");
+
+ clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH5");
+
+ clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH6");
+
+ clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "PERIPH7");
+
+ clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "lcd");
+ clk_register_clkdev(clk, "lcd", "mcde");
+
+ clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "bml");
+
+ clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "hdmi");
+ clk_register_clkdev(clk, "hdmi", "mcde");
+
+ clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apeat");
+
+ clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "apetrace");
+
+ clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mcde");
+ clk_register_clkdev(clk, "mcde", "mcde");
+ clk_register_clkdev(clk, "dsisys", "dsilink.0");
+ clk_register_clkdev(clk, "dsisys", "dsilink.1");
+ clk_register_clkdev(clk, "dsisys", "dsilink.2");
+
+ clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "ipi2");
+
+ clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+ CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dsialt");
+
+ clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "dma40.0");
+
+ clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "b2r2");
+ clk_register_clkdev(clk, NULL, "b2r2_core");
+ clk_register_clkdev(clk, NULL, "U8500-B2R2.0");
+
+ clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+ CLK_IS_ROOT|CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "tv");
+ clk_register_clkdev(clk, "tv", "mcde");
+
+ clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "SSP");
+
+ clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "rngclk");
+
+ clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "uicc");
+
+ /*
+ * FIXME: The MTU clocks might need some kind of "parent muxed join"
+ * and these have no K-clocks. For now, we ignore the missing
+ * connection to the corresponding P-clocks, p6_mtu0_clk and
+ * p6_mtu1_clk. Instead timclk is used which is the valid parent.
+ */
+ clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT);
+ clk_register_clkdev(clk, NULL, "sdmmc");
+
+
+ clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+ PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs2", "mcde");
+ clk_register_clkdev(clk, "dsihs2", "dsilink.2");
+
+
+ clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+ PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs0", "mcde");
+ clk_register_clkdev(clk, "dsihs0", "dsilink.0");
+
+ clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+ PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsihs1", "mcde");
+ clk_register_clkdev(clk, "dsihs1", "dsilink.1");
+
+ clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+ PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp0", "dsilink.0");
+ clk_register_clkdev(clk, "dsilp0", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+ PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp1", "dsilink.1");
+ clk_register_clkdev(clk, "dsilp1", "mcde");
+
+ clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+ PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, "dsilp2", "dsilink.2");
+ clk_register_clkdev(clk, "dsilp2", "mcde");
+
+ clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS,
+ CLK_IS_ROOT|CLK_GET_RATE_NOCACHE|
+ CLK_IGNORE_UNUSED);
+ clk_register_clkdev(clk, NULL, "smp_twd");
+
+ /*
+ * FIXME: Add special handled PRCMU clocks here:
+ * 1. clk_arm, use PRCMU_ARMCLK.
+ * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+ * 3. ab9540_clkout1yuv, see clkout0yuv
+ */
+
+ /* PRCC P-clocks */
+ clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart1");
+
+ clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
+ BIT(3), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
+ BIT(4), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
+ BIT(6), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, NULL, "spi3");
+
+ clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
+ BIT(8), 0);
+
+ clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpioblock0");
+
+ clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
+ BIT(10), 0);
+ clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "spi2");
+
+ clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "spi1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pwl");
+
+ clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi4");
+
+ clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi1");
+
+
+ clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi3");
+
+ clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "spi0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE,
+ BIT(9), 0);
+ clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE,
+ BIT(10), 0);
+ clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+
+ clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+ clk_register_clkdev(clk, NULL, "gpio.6");
+ clk_register_clkdev(clk, NULL, "gpio.7");
+ clk_register_clkdev(clk, NULL, "gpioblock1");
+
+ clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
+ BIT(11), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, NULL, "fsmc");
+
+ clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
+ BIT(1), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
+ BIT(2), 0);
+ clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
+ BIT(3), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
+ BIT(5), 0);
+
+ clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
+ BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "uart2");
+
+ clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE,
+ BIT(7), 0);
+ clk_register_clkdev(clk, "apb_pclk", "sdi5");
+
+ clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE,
+ BIT(8), 0);
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "gpio.4");
+ clk_register_clkdev(clk, NULL, "gpio.5");
+ clk_register_clkdev(clk, NULL, "gpioblock2");
+
+ clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE,
+ BIT(0), 0);
+ clk_register_clkdev(clk, "usb", "musb-ux500.0");
+
+ clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "gpio.8");
+ clk_register_clkdev(clk, NULL, "gpioblock3");
+
+ clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
+ BIT(0), 0);
+
+ clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
+ BIT(1), 0);
+ clk_register_clkdev(clk, NULL, "cryp0");
+ clk_register_clkdev(clk, NULL, "cryp1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE,
+ BIT(2), 0);
+ clk_register_clkdev(clk, NULL, "hash0");
+
+ clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE,
+ BIT(3), 0);
+ clk_register_clkdev(clk, NULL, "pka");
+
+ clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE,
+ BIT(4), 0);
+ clk_register_clkdev(clk, NULL, "hash1");
+
+ clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE,
+ BIT(5), 0);
+ clk_register_clkdev(clk, NULL, "cfgreg");
+
+ clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
+ BIT(6), 0);
+ clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
+ BIT(7), 0);
+
+ /* PRCC K-clocks
+ *
+ * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
+ * by enabling just the K-clock, even if it is not a valid parent to
+ * the K-clock. Until drivers get fixed we might need some kind of
+ * "parent muxed join".
+ */
+
+ /* Periph1 */
+ clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart0");
+
+ clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+ U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart1");
+
+ clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
+ U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi0");
+
+ clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+ U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ /* FIXME: Redefinition of BIT(3). */
+ clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+ U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+ U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+
+ /* Periph2 */
+ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+ U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi4");
+
+ clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+ U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi1");
+
+ clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+ U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi3");
+
+ /* Note that rate is received from parent. */
+ clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+ U8500_CLKRST2_BASE, BIT(6),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+ clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+ U8500_CLKRST2_BASE, BIT(7),
+ CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+
+ /* Periph3 */
+ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+ U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+ U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi2");
+
+ clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+ U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
+
+ clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+ U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "uart2");
+
+ clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+ U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "sdi5");
+
+ /* Periph6 */
+ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
+ U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
+
+}
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
new file mode 100644
index 0000000..10adfd2
--- /dev/null
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u8540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u8540_clk_init(void)
+{
+ /* register clocks here */
+}
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
new file mode 100644
index 0000000..dbc0191
--- /dev/null
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u9540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+
+#include "clk.h"
+
+void u9540_clk_init(void)
+{
+ /* register clocks here */
+}
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 50cf6a2..c0a0f64 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,3 +1,4 @@
# Makefile for Versatile-specific clocks
obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
new file mode 100644
index 0000000..e21a99c
--- /dev/null
+++ b/drivers/clk/versatile/clk-realview.c
@@ -0,0 +1,114 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+ u32 val;
+ struct icst_vco vco;
+
+ val = readl(sys_vcoreg);
+ vco.v = val & 0x1ff;
+ vco.r = (val >> 9) & 0x7f;
+ vco.s = (val >> 16) & 03;
+ return vco;
+}
+
+static void realview_oscvco_set(struct icst_vco vco)
+{
+ u32 val;
+
+ val = readl(sys_vcoreg) & ~0x7ffff;
+ val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+ /* This magic unlocks the CM VCO so it can be controlled */
+ writel(0xa05f, sys_lock);
+ writel(val, sys_vcoreg);
+ /* This locks the CM again */
+ writel(0, sys_lock);
+}
+
+static const struct icst_params realview_oscvco_params = {
+ .ref = 24000000,
+ .vco_max = ICST307_VCO_MAX,
+ .vco_min = ICST307_VCO_MIN,
+ .vd_min = 4 + 8,
+ .vd_max = 511 + 8,
+ .rd_min = 1 + 2,
+ .rd_max = 127 + 2,
+ .s2div = icst307_s2div,
+ .idx2s = icst307_idx2s,
+};
+
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+ .params = &realview_oscvco_params,
+ .getvco = realview_oscvco_get,
+ .setvco = realview_oscvco_set,
+};
+
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+ struct clk *clk;
+
+ sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+ if (is_pb1176)
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+ else
+ sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+
+
+ /* APB clock dummy */
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ /* 24 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, NULL, "dev:uart0");
+ clk_register_clkdev(clk, NULL, "dev:uart1");
+ clk_register_clkdev(clk, NULL, "dev:uart2");
+ clk_register_clkdev(clk, NULL, "fpga:kmi0");
+ clk_register_clkdev(clk, NULL, "fpga:kmi1");
+ clk_register_clkdev(clk, NULL, "fpga:mmc0");
+ clk_register_clkdev(clk, NULL, "dev:ssp0");
+ if (is_pb1176) {
+ /*
+ * UART3 is on the dev chip in PB1176
+ * UART4 only exists in PB1176
+ */
+ clk_register_clkdev(clk, NULL, "dev:uart3");
+ clk_register_clkdev(clk, NULL, "dev:uart4");
+ } else
+ clk_register_clkdev(clk, NULL, "fpga:uart3");
+
+
+ /* 1 MHz clock */
+ clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+ 1000000);
+ clk_register_clkdev(clk, NULL, "sp804");
+
+ /* ICST VCO clock */
+ clk = icst_clk_register(NULL, &realview_icst_desc);
+ clk_register_clkdev(clk, NULL, "dev:clcd");
+ clk_register_clkdev(clk, NULL, "issp:clcd");
+}
diff --git a/drivers/crypto/caam/key_gen.c b/drivers/crypto/caam/key_gen.c
index 0028881..d216cd3 100644
--- a/drivers/crypto/caam/key_gen.c
+++ b/drivers/crypto/caam/key_gen.c
@@ -120,3 +120,4 @@
return ret;
}
+EXPORT_SYMBOL(gen_split_key);
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 920a609..38f9e52 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -669,13 +669,18 @@
}
info->dev = &pdev->dev;
info->max77693 = max77693;
- info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic,
- &max77693_muic_regmap_config);
- if (IS_ERR(info->max77693->regmap_muic)) {
- ret = PTR_ERR(info->max77693->regmap_muic);
- dev_err(max77693->dev,
- "failed to allocate register map: %d\n", ret);
- goto err_regmap;
+ if (info->max77693->regmap_muic)
+ dev_dbg(&pdev->dev, "allocate register map\n");
+ else {
+ info->max77693->regmap_muic = devm_regmap_init_i2c(
+ info->max77693->muic,
+ &max77693_muic_regmap_config);
+ if (IS_ERR(info->max77693->regmap_muic)) {
+ ret = PTR_ERR(info->max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
}
platform_set_drvdata(pdev, info);
mutex_init(&info->mutex);
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 9cac88a..9528779 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -26,6 +26,8 @@
#include <linux/syscore_ops.h>
#include <linux/slab.h>
+#include <asm/mach/irq.h>
+
#include <mach/irqs.h>
/*
@@ -59,6 +61,7 @@
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
+static int irq_base;
#ifdef CONFIG_OF
static struct irq_domain *domain;
@@ -167,63 +170,14 @@
return ret;
}
-#ifdef CONFIG_ARCH_PXA
-static inline int __pxa_gpio_to_irq(int gpio)
-{
- if (gpio_is_pxa_type(gpio_type))
- return PXA_GPIO_TO_IRQ(gpio);
- return -1;
-}
-
-static inline int __pxa_irq_to_gpio(int irq)
-{
- if (gpio_is_pxa_type(gpio_type))
- return irq - PXA_GPIO_TO_IRQ(0);
- return -1;
-}
-#else
-static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
-static inline int __pxa_irq_to_gpio(int irq) { return -1; }
-#endif
-
-#ifdef CONFIG_ARCH_MMP
-static inline int __mmp_gpio_to_irq(int gpio)
-{
- if (gpio_is_mmp_type(gpio_type))
- return MMP_GPIO_TO_IRQ(gpio);
- return -1;
-}
-
-static inline int __mmp_irq_to_gpio(int irq)
-{
- if (gpio_is_mmp_type(gpio_type))
- return irq - MMP_GPIO_TO_IRQ(0);
- return -1;
-}
-#else
-static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
-static inline int __mmp_irq_to_gpio(int irq) { return -1; }
-#endif
-
static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- int gpio, ret;
-
- gpio = chip->base + offset;
- ret = __pxa_gpio_to_irq(gpio);
- if (ret >= 0)
- return ret;
- return __mmp_gpio_to_irq(gpio);
+ return chip->base + offset + irq_base;
}
int pxa_irq_to_gpio(int irq)
{
- int ret;
-
- ret = __pxa_irq_to_gpio(irq);
- if (ret >= 0)
- return ret;
- return __mmp_irq_to_gpio(irq);
+ return irq - irq_base;
}
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -403,6 +357,9 @@
struct pxa_gpio_chip *c;
int loop, gpio, gpio_base, n;
unsigned long gedr;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
do {
loop = 0;
@@ -422,6 +379,8 @@
}
}
} while (loop);
+
+ chained_irq_exit(chip, desc);
}
static void pxa_ack_muxed_gpio(struct irq_data *d)
@@ -535,7 +494,7 @@
static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
{
- int ret, nr_banks, nr_gpios, irq_base;
+ int ret, nr_banks, nr_gpios;
struct device_node *prev, *next, *np = pdev->dev.of_node;
const struct of_device_id *of_id =
of_match_device(pxa_gpio_dt_ids, &pdev->dev);
@@ -590,10 +549,20 @@
int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
ret = pxa_gpio_probe_dt(pdev);
- if (ret < 0)
+ if (ret < 0) {
pxa_last_gpio = pxa_gpio_nums();
- else
+#ifdef CONFIG_ARCH_PXA
+ if (gpio_is_pxa_type(gpio_type))
+ irq_base = PXA_GPIO_TO_IRQ(0);
+#endif
+#ifdef CONFIG_ARCH_MMP
+ if (gpio_is_mmp_type(gpio_type))
+ irq_base = MMP_GPIO_TO_IRQ(0);
+#endif
+ } else {
use_of = 1;
+ }
+
if (!pxa_last_gpio)
return -EINVAL;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ba126cc..8af4b06 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -938,6 +938,67 @@
s3c_gpiolib_track(chip);
}
+#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
+static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
+{
+ unsigned int pin;
+
+ if (WARN_ON(gc->of_gpio_n_cells < 3))
+ return -EINVAL;
+
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+ return -EINVAL;
+
+ if (gpiospec->args[0] > gc->ngpio)
+ return -EINVAL;
+
+ pin = gc->base + gpiospec->args[0];
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+
+ if (flags)
+ *flags = gpiospec->args[2] >> 16;
+
+ return gpiospec->args[0];
+}
+
+static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,s3c24xx-gpio", },
+ {}
+};
+
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ s3c24xx_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 3;
+ gc->of_xlate = s3c24xx_gpio_xlate;
+}
+#else
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
+
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
int nr_chips, void __iomem *base)
{
@@ -962,6 +1023,8 @@
gc->direction_output = samsung_gpiolib_2bit_output;
samsung_gpiolib_add(chip);
+
+ s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
}
}
@@ -3131,46 +3194,6 @@
}
EXPORT_SYMBOL(s3c_gpio_getpull);
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index dc5184d..d982593 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -30,9 +30,6 @@
#include <asm/mach/irq.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index f030880..c5f8ca2 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -396,6 +396,29 @@
static int gpio_twl4030_remove(struct platform_device *pdev);
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+ struct twl4030_gpio_platform_data *omap_twl_info;
+
+ omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+ if (!omap_twl_info)
+ return NULL;
+
+ omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+ "ti,use-leds");
+
+ of_property_read_u32(dev->of_node, "ti,debounce",
+ &omap_twl_info->debounce);
+ of_property_read_u32(dev->of_node, "ti,mmc-cd",
+ (u32 *)&omap_twl_info->mmc_cd);
+ of_property_read_u32(dev->of_node, "ti,pullups",
+ &omap_twl_info->pullups);
+ of_property_read_u32(dev->of_node, "ti,pulldowns",
+ &omap_twl_info->pulldowns);
+
+ return omap_twl_info;
+}
+
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -428,33 +451,37 @@
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
twl_gpiochip.dev = &pdev->dev;
- if (pdata) {
- /*
- * NOTE: boards may waste power if they don't set pullups
- * and pulldowns correctly ... default for non-ULPI pins is
- * pulldown, and some other pins may have external pullups
- * or pulldowns. Careful!
- */
- ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
- if (ret)
- dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
- pdata->pullups, pdata->pulldowns,
- ret);
+ if (node)
+ pdata = of_gpio_twl4030(&pdev->dev);
- ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
- if (ret)
- dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
- pdata->debounce, pdata->mmc_cd,
- ret);
-
- /*
- * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
- * is (still) clear if use_leds is set.
- */
- if (pdata->use_leds)
- twl_gpiochip.ngpio += 2;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "Platform data is missing\n");
+ return -ENXIO;
}
+ /*
+ * NOTE: boards may waste power if they don't set pullups
+ * and pulldowns correctly ... default for non-ULPI pins is
+ * pulldown, and some other pins may have external pullups
+ * or pulldowns. Careful!
+ */
+ ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+ if (ret)
+ dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+ pdata->pullups, pdata->pulldowns, ret);
+
+ ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+ if (ret)
+ dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+ pdata->debounce, pdata->mmc_cd, ret);
+
+ /*
+ * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+ * is (still) clear if use_leds is set.
+ */
+ if (pdata->use_leds)
+ twl_gpiochip.ngpio += 2;
+
ret = gpiochip_add(&twl_gpiochip);
if (ret < 0) {
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index d0c4574..3616480 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -193,6 +193,9 @@
.mmap = ast_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.read = drm_read,
};
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 7282c08..a712caf 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -841,7 +841,7 @@
ast->cursor_cache = obj;
ast->cursor_cache_gpu_addr = gpu_addr;
- DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
+ DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
return 0;
fail:
return ret;
diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c
index 7053140..b83a2d7 100644
--- a/drivers/gpu/drm/cirrus/cirrus_drv.c
+++ b/drivers/gpu/drm/cirrus/cirrus_drv.c
@@ -74,6 +74,9 @@
.unlocked_ioctl = drm_ioctl,
.mmap = cirrus_mmap,
.poll = drm_poll,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.fasync = drm_fasync,
};
static struct drm_driver driver = {
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 7f50967..59a26e5 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -36,6 +36,6 @@
config DRM_EXYNOS_G2D
bool "Exynos DRM G2D"
- depends on DRM_EXYNOS
+ depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_G2D
help
Choose this option if you want to use Exynos G2D for DRM.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
index 613bf8a..ae13feb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
@@ -163,6 +163,12 @@
/* TODO */
}
+static int exynos_gem_dmabuf_mmap(struct dma_buf *dma_buf,
+ struct vm_area_struct *vma)
+{
+ return -ENOTTY;
+}
+
static struct dma_buf_ops exynos_dmabuf_ops = {
.map_dma_buf = exynos_gem_map_dma_buf,
.unmap_dma_buf = exynos_gem_unmap_dma_buf,
@@ -170,6 +176,7 @@
.kmap_atomic = exynos_gem_dmabuf_kmap_atomic,
.kunmap = exynos_gem_dmabuf_kunmap,
.kunmap_atomic = exynos_gem_dmabuf_kunmap_atomic,
+ .mmap = exynos_gem_dmabuf_mmap,
.release = exynos_dmabuf_release,
};
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index ebacec6..d070719 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -160,7 +160,6 @@
if (!file_priv)
return -ENOMEM;
- drm_prime_init_file_private(&file->prime);
file->driver_priv = file_priv;
return exynos_drm_subdrv_open(dev, file);
@@ -184,7 +183,6 @@
e->base.destroy(&e->base);
}
}
- drm_prime_destroy_file_private(&file->prime);
spin_unlock_irqrestore(&dev->event_lock, flags);
exynos_drm_subdrv_close(dev, file);
@@ -241,6 +239,9 @@
.poll = drm_poll,
.read = drm_read,
.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.release = drm_release,
};
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index a68d2b3..b19cd93 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -831,11 +831,6 @@
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "failed to find registers\n");
- ret = -ENOENT;
- goto err_clk;
- }
ctx->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!ctx->regs) {
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index d2d88f2..1065e90 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -129,7 +129,6 @@
struct g2d_data {
struct device *dev;
struct clk *gate_clk;
- struct resource *regs_res;
void __iomem *regs;
int irq;
struct workqueue_struct *g2d_workq;
@@ -751,7 +750,7 @@
struct exynos_drm_subdrv *subdrv;
int ret;
- g2d = kzalloc(sizeof(*g2d), GFP_KERNEL);
+ g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL);
if (!g2d) {
dev_err(dev, "failed to allocate driver data\n");
return -ENOMEM;
@@ -759,10 +758,8 @@
g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
sizeof(struct g2d_runqueue_node), 0, 0, NULL);
- if (!g2d->runqueue_slab) {
- ret = -ENOMEM;
- goto err_free_mem;
- }
+ if (!g2d->runqueue_slab)
+ return -ENOMEM;
g2d->dev = dev;
@@ -794,38 +791,26 @@
pm_runtime_enable(dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "failed to get I/O memory\n");
- ret = -ENOENT;
- goto err_put_clk;
- }
- g2d->regs_res = request_mem_region(res->start, resource_size(res),
- dev_name(dev));
- if (!g2d->regs_res) {
- dev_err(dev, "failed to request I/O memory\n");
- ret = -ENOENT;
- goto err_put_clk;
- }
-
- g2d->regs = ioremap(res->start, resource_size(res));
+ g2d->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!g2d->regs) {
dev_err(dev, "failed to remap I/O memory\n");
ret = -ENXIO;
- goto err_release_res;
+ goto err_put_clk;
}
g2d->irq = platform_get_irq(pdev, 0);
if (g2d->irq < 0) {
dev_err(dev, "failed to get irq\n");
ret = g2d->irq;
- goto err_unmap_base;
+ goto err_put_clk;
}
- ret = request_irq(g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d);
+ ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0,
+ "drm_g2d", g2d);
if (ret < 0) {
dev_err(dev, "irq request failed\n");
- goto err_unmap_base;
+ goto err_put_clk;
}
platform_set_drvdata(pdev, g2d);
@@ -838,7 +823,7 @@
ret = exynos_drm_subdrv_register(subdrv);
if (ret < 0) {
dev_err(dev, "failed to register drm g2d device\n");
- goto err_free_irq;
+ goto err_put_clk;
}
dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n",
@@ -846,13 +831,6 @@
return 0;
-err_free_irq:
- free_irq(g2d->irq, g2d);
-err_unmap_base:
- iounmap(g2d->regs);
-err_release_res:
- release_resource(g2d->regs_res);
- kfree(g2d->regs_res);
err_put_clk:
pm_runtime_disable(dev);
clk_put(g2d->gate_clk);
@@ -862,8 +840,6 @@
destroy_workqueue(g2d->g2d_workq);
err_destroy_slab:
kmem_cache_destroy(g2d->runqueue_slab);
-err_free_mem:
- kfree(g2d);
return ret;
}
@@ -873,24 +849,18 @@
cancel_work_sync(&g2d->runqueue_work);
exynos_drm_subdrv_unregister(&g2d->subdrv);
- free_irq(g2d->irq, g2d);
while (g2d->runqueue_node) {
g2d_free_runqueue_node(g2d, g2d->runqueue_node);
g2d->runqueue_node = g2d_get_runqueue_node(g2d);
}
- iounmap(g2d->regs);
- release_resource(g2d->regs_res);
- kfree(g2d->regs_res);
-
pm_runtime_disable(&pdev->dev);
clk_put(g2d->gate_clk);
g2d_fini_cmdlist(g2d);
destroy_workqueue(g2d->g2d_workq);
kmem_cache_destroy(g2d->runqueue_slab);
- kfree(g2d);
return 0;
}
@@ -924,7 +894,7 @@
}
#endif
-SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
+static SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
struct platform_driver g2d_driver = {
.probe = g2d_probe,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c
index f9efde4..a38051c 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gem.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c
@@ -122,7 +122,7 @@
__free_page(pages[i]);
drm_free_large(pages);
- return ERR_PTR(PTR_ERR(p));
+ return ERR_CAST(p);
}
static void exynos_gem_put_pages(struct drm_gem_object *obj,
@@ -662,7 +662,7 @@
*/
args->pitch = args->width * ((args->bpp + 7) / 8);
- args->size = PAGE_ALIGN(args->pitch * args->height);
+ args->size = args->pitch * args->height;
exynos_gem_obj = exynos_drm_gem_create(dev, args->flags, args->size);
if (IS_ERR(exynos_gem_obj))
diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c
index 8ffcdf8..3fdf0b6 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c
@@ -345,7 +345,7 @@
DRM_DEBUG_KMS("%s\n", __FILE__);
- ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx) {
DRM_LOG_KMS("failed to alloc common hdmi context.\n");
return -ENOMEM;
@@ -371,7 +371,6 @@
DRM_DEBUG_KMS("%s\n", __FILE__);
exynos_drm_subdrv_unregister(&ctx->subdrv);
- kfree(ctx);
return 0;
}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c
index b89829e..e1f94b7 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_plane.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c
@@ -29,7 +29,6 @@
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_NV12,
- DRM_FORMAT_NV12M,
DRM_FORMAT_NV12MT,
};
diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c
index bb1550c..537027a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c
@@ -633,7 +633,7 @@
DRM_DEBUG_KMS("%s\n", __FILE__);
- ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
@@ -673,8 +673,6 @@
ctx->raw_edid = NULL;
}
- kfree(ctx);
-
return 0;
}
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 409e2ec..a6aea6f 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -2172,7 +2172,7 @@
DRM_DEBUG_KMS("HDMI resource init\n");
- memset(res, 0, sizeof *res);
+ memset(res, 0, sizeof(*res));
/* get clocks, power */
res->hdmi = clk_get(dev, "hdmi");
@@ -2204,7 +2204,7 @@
clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
res->regul_bulk = kzalloc(ARRAY_SIZE(supply) *
- sizeof res->regul_bulk[0], GFP_KERNEL);
+ sizeof(res->regul_bulk[0]), GFP_KERNEL);
if (!res->regul_bulk) {
DRM_ERROR("failed to get memory for regulators\n");
goto fail;
@@ -2243,7 +2243,7 @@
clk_put(res->sclk_hdmi);
if (!IS_ERR_OR_NULL(res->hdmi))
clk_put(res->hdmi);
- memset(res, 0, sizeof *res);
+ memset(res, 0, sizeof(*res));
return 0;
}
@@ -2312,11 +2312,6 @@
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DRM_ERROR("failed to find registers\n");
- ret = -ENOENT;
- goto err_resource;
- }
hdata->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!hdata->regs) {
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 30fcc12..25b97d5 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -236,11 +236,11 @@
static void vp_default_filter(struct mixer_resources *res)
{
vp_filter_set(res, VP_POLY8_Y0_LL,
- filter_y_horiz_tap8, sizeof filter_y_horiz_tap8);
+ filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8));
vp_filter_set(res, VP_POLY4_Y0_LL,
- filter_y_vert_tap4, sizeof filter_y_vert_tap4);
+ filter_y_vert_tap4, sizeof(filter_y_vert_tap4));
vp_filter_set(res, VP_POLY4_C0_LL,
- filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4);
+ filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4));
}
static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable)
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 0f9b7db..cf49ba5 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -476,6 +476,7 @@
.pos = DSPAPOS,
.surf = DSPASURF,
.addr = MRST_DSPABASE,
+ .base = MRST_DSPABASE,
.status = PIPEASTAT,
.linoff = DSPALINOFF,
.tileoff = DSPATILEOFF,
@@ -499,6 +500,7 @@
.pos = DSPBPOS,
.surf = DSPBSURF,
.addr = DSPBBASE,
+ .base = DSPBBASE,
.status = PIPEBSTAT,
.linoff = DSPBLINOFF,
.tileoff = DSPBTILEOFF,
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index 57d892e..463ec68 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -115,6 +115,9 @@
.unlocked_ioctl = drm_ioctl,
.mmap = i810_mmap_buffers,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c
index f9924ad..48cfcca 100644
--- a/drivers/gpu/drm/i810/i810_drv.c
+++ b/drivers/gpu/drm/i810/i810_drv.c
@@ -51,6 +51,9 @@
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 9cf7dfe..914c0df 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1587,6 +1587,7 @@
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->error_lock);
spin_lock_init(&dev_priv->rps_lock);
+ spin_lock_init(&dev_priv->dpio_lock);
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
dev_priv->num_pipe = 3;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8a38285..5249640 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2700,9 +2700,6 @@
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
} else if (INTEL_INFO(dev)->gen == 3) {
- /* IIR "flip pending" means done if this bit is set */
- I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
-
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2dfa6cf..bc2ad34 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1376,7 +1376,8 @@
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+ WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+ && (val & DP_PIPEB_SELECT),
"IBX PCH dp port still using transcoder B\n");
}
@@ -1388,7 +1389,8 @@
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+ WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0
+ && (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a6c426a..ace757a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2533,14 +2533,10 @@
break;
}
- intel_dp_i2c_init(intel_dp, intel_connector, name);
-
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
- bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
- struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
@@ -2591,6 +2587,13 @@
DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+ }
+
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
+ if (is_edp(intel_dp)) {
+ bool ret;
+ struct edid *edid;
ironlake_edp_panel_vdd_on(intel_dp);
ret = intel_dp_get_dpcd(intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 3df4f5f..e019b23 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -162,19 +162,12 @@
return val;
}
-u32 intel_panel_get_max_backlight(struct drm_device *dev)
+static u32 _intel_panel_get_max_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 max;
max = i915_read_blc_pwm_ctl(dev_priv);
- if (max == 0) {
- /* XXX add code here to query mode clock or hardware clock
- * and program max PWM appropriately.
- */
- pr_warn_once("fixme: max PWM is zero\n");
- return 1;
- }
if (HAS_PCH_SPLIT(dev)) {
max >>= 16;
@@ -188,6 +181,22 @@
max *= 0xff;
}
+ return max;
+}
+
+u32 intel_panel_get_max_backlight(struct drm_device *dev)
+{
+ u32 max;
+
+ max = _intel_panel_get_max_backlight(dev);
+ if (max == 0) {
+ /* XXX add code here to query mode clock or hardware clock
+ * and program max PWM appropriately.
+ */
+ pr_warn_once("fixme: max PWM is zero\n");
+ return 1;
+ }
+
DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
return max;
}
@@ -424,7 +433,11 @@
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_RAW;
- props.max_brightness = intel_panel_get_max_backlight(dev);
+ props.max_brightness = _intel_panel_get_max_backlight(dev);
+ if (props.max_brightness == 0) {
+ DRM_ERROR("Failed to get maximum backlight value\n");
+ return -ENODEV;
+ }
dev_priv->backlight =
backlight_device_register("intel_backlight",
&connector->kdev, dev,
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 1881c8c..ba8a27b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3672,6 +3672,9 @@
if (IS_PINEVIEW(dev))
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
+
+ /* IIR "flip pending" means done if this bit is set */
+ I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
}
static void i85x_init_clock_gating(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d81bb0b..123afd3 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2573,7 +2573,6 @@
hotplug_mask = intel_sdvo->is_sdvob ?
SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
}
- dev_priv->hotplug_supported_mask |= hotplug_mask;
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
@@ -2581,14 +2580,6 @@
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
- /* Set up hotplug command - note paranoia about contents of reply.
- * We assume that the hardware is in a sane state, and only touch
- * the bits we think we understand.
- */
- intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
- &intel_sdvo->hotplug_active, 2);
- intel_sdvo->hotplug_active[0] &= ~0x3;
-
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
@@ -2596,6 +2587,12 @@
goto err;
}
+ /* Only enable the hotplug irq if we need it, to work around noisy
+ * hotplug lines.
+ */
+ if (intel_sdvo->hotplug_active[0])
+ dev_priv->hotplug_supported_mask |= hotplug_mask;
+
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
/* Set the input timing to the screen. Assume always input 0. */
diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
index ea1024d..e5f145d 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.c
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
@@ -84,6 +84,9 @@
.mmap = mgag200_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.read = drm_read,
};
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 69688ef..7e16dc5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -598,7 +598,7 @@
args->size = args->pitch * args->height;
args->size = roundup(args->size, PAGE_SIZE);
- ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+ ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index f429e6a..f034905 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -115,6 +115,9 @@
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
+ /* initialise gpios and routing to vbios defaults */
+ nouveau_gpio_reset(dev);
+
/* disable, and ack any pending gpio interrupts */
nv_wr32(dev, 0xe050, 0x00000000);
nv_wr32(dev, 0xe054, 0xffffffff);
diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c
index dac525b..8a2fc89 100644
--- a/drivers/gpu/drm/nouveau/nvd0_display.c
+++ b/drivers/gpu/drm/nouveau/nvd0_display.c
@@ -1510,10 +1510,10 @@
case OUTPUT_DP:
if (nv_connector->base.display_info.bpc == 6) {
nv_encoder->dp.datarate = mode->clock * 18 / 8;
- syncs |= 0x00000140;
+ syncs |= 0x00000002 << 6;
} else {
nv_encoder->dp.datarate = mode->clock * 24 / 8;
- syncs |= 0x00000180;
+ syncs |= 0x00000005 << 6;
}
if (nv_encoder->dcb->sorconf.link & 1)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 2817101..e721e30 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1479,14 +1479,98 @@
}
}
+/**
+ * radeon_get_pll_use_mask - look up a mask of which pplls are in use
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the mask of which PPLLs (Pixel PLLs) are in use.
+ */
+static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_crtc *test_crtc;
+ struct radeon_crtc *radeon_test_crtc;
+ u32 pll_in_use = 0;
+
+ list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+ if (crtc == test_crtc)
+ continue;
+
+ radeon_test_crtc = to_radeon_crtc(test_crtc);
+ if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+ pll_in_use |= (1 << radeon_test_crtc->pll_id);
+ }
+ return pll_in_use;
+}
+
+/**
+ * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
+ * also in DP mode. For DP, a single PPLL can be used for all DP
+ * crtcs/encoders.
+ */
+static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_encoder *test_encoder;
+ struct radeon_crtc *radeon_test_crtc;
+
+ list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+ if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+ /* for DP use the same PLL for all */
+ radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
+ if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+ return radeon_test_crtc->pll_id;
+ }
+ }
+ }
+ return ATOM_PPLL_INVALID;
+}
+
+/**
+ * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors
+ * a single PPLL can be used for all DP crtcs/encoders. For non-DP
+ * monitors a dedicated PPLL must be used. If a particular board has
+ * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
+ * as there is no need to program the PLL itself. If we are not able to
+ * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
+ * avoid messing up an existing monitor.
+ *
+ * Asic specific PLL information
+ *
+ * DCE 6.1
+ * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
+ * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
+ *
+ * DCE 6.0
+ * - PPLL0 is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 5.0
+ * - DCPLL is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 3.0/4.0/4.1
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ */
static int radeon_atom_pick_pll(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *test_encoder;
- struct drm_crtc *test_crtc;
- uint32_t pll_in_use = 0;
+ u32 pll_in_use;
+ int pll;
if (ASIC_IS_DCE61(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1498,32 +1582,40 @@
if ((test_radeon_encoder->encoder_id ==
ENCODER_OBJECT_ID_INTERNAL_UNIPHY) &&
- (dig->linkb == false)) /* UNIPHY A uses PPLL2 */
+ (dig->linkb == false))
+ /* UNIPHY A uses PPLL2 */
return ATOM_PPLL2;
+ else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+ /* UNIPHY B/C/D/E/F */
+ if (rdev->clock.dp_extclk)
+ /* skip PPLL programming if using ext clock */
+ return ATOM_PPLL_INVALID;
+ else {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
+ }
+ break;
}
}
/* UNIPHY B/C/D/E/F */
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_test_crtc;
-
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if ((radeon_test_crtc->pll_id == ATOM_PPLL0) ||
- (radeon_test_crtc->pll_id == ATOM_PPLL1))
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- if (!(pll_in_use & 4))
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ if (!(pll_in_use & (1 << ATOM_PPLL0)))
return ATOM_PPLL0;
- return ATOM_PPLL1;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
+ return ATOM_PPLL1;
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
} else if (ASIC_IS_DCE4(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
* depending on the asic:
* DCE4: PPLL or ext clock
- * DCE5: DCPLL or ext clock
+ * DCE5: PPLL, DCPLL, or ext clock
+ * DCE6: PPLL, PPLL0, or ext clock
*
* Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
* PPLL/DCPLL programming and only program the DP DTO for the
@@ -1531,31 +1623,34 @@
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (rdev->clock.dp_extclk)
+ /* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else if (ASIC_IS_DCE6(rdev))
+ /* use PPLL0 for all DP */
return ATOM_PPLL0;
else if (ASIC_IS_DCE5(rdev))
+ /* use DCPLL for all DP */
return ATOM_DCPLL;
+ else {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
}
+ break;
}
}
-
- /* otherwise, pick one of the plls */
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_test_crtc;
-
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
- (radeon_test_crtc->pll_id <= ATOM_PPLL2))
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- if (!(pll_in_use & 1))
+ /* all other cases */
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ if (!(pll_in_use & (1 << ATOM_PPLL2)))
+ return ATOM_PPLL2;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
return ATOM_PPLL1;
- return ATOM_PPLL2;
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
} else
+ /* use PPLL1 or PPLL2 */
return radeon_crtc->crtc_id;
}
@@ -1697,7 +1792,7 @@
break;
}
done:
- radeon_crtc->pll_id = -1;
+ radeon_crtc->pll_id = ATOM_PPLL_INVALID;
}
static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1746,6 +1841,6 @@
else
radeon_crtc->crtc_offset = 0;
}
- radeon_crtc->pll_id = -1;
+ radeon_crtc->pll_id = ATOM_PPLL_INVALID;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 7b737b9..2a59375 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -131,7 +131,7 @@
*/
void radeon_fence_process(struct radeon_device *rdev, int ring)
{
- uint64_t seq, last_seq;
+ uint64_t seq, last_seq, last_emitted;
unsigned count_loop = 0;
bool wake = false;
@@ -158,13 +158,15 @@
*/
last_seq = atomic64_read(&rdev->fence_drv[ring].last_seq);
do {
+ last_emitted = rdev->fence_drv[ring].sync_seq[ring];
seq = radeon_fence_read(rdev, ring);
seq |= last_seq & 0xffffffff00000000LL;
if (seq < last_seq) {
- seq += 0x100000000LL;
+ seq &= 0xffffffff;
+ seq |= last_emitted & 0xffffffff00000000LL;
}
- if (seq == last_seq) {
+ if (seq <= last_seq || seq > last_emitted) {
break;
}
/* If we loop over we don't want to return without
diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c
index d31d4cc..c5a1643 100644
--- a/drivers/gpu/drm/savage/savage_drv.c
+++ b/drivers/gpu/drm/savage/savage_drv.c
@@ -43,6 +43,9 @@
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 7f11987..867dc03 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -74,6 +74,9 @@
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c
index 90f6b13..a7f4d6b 100644
--- a/drivers/gpu/drm/tdfx/tdfx_drv.c
+++ b/drivers/gpu/drm/tdfx/tdfx_drv.c
@@ -49,6 +49,9 @@
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 6e52069..9f84128 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -66,6 +66,9 @@
.unlocked_ioctl = drm_ioctl,
.release = drm_release,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c
index e927b4c..af1b914 100644
--- a/drivers/gpu/drm/via/via_drv.c
+++ b/drivers/gpu/drm/via/via_drv.c
@@ -65,6 +65,9 @@
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
.llseek = noop_llseek,
};
diff --git a/drivers/gpu/drm/vmwgfx/Kconfig b/drivers/gpu/drm/vmwgfx/Kconfig
index 794ff67..b71bcd0 100644
--- a/drivers/gpu/drm/vmwgfx/Kconfig
+++ b/drivers/gpu/drm/vmwgfx/Kconfig
@@ -12,3 +12,11 @@
This is a KMS enabled DRM driver for the VMware SVGA2
virtual hardware.
The compiled module will be called "vmwgfx.ko".
+
+config DRM_VMWGFX_FBCON
+ depends on DRM_VMWGFX
+ bool "Enable framebuffer console under vmwgfx by default"
+ help
+ Choose this option if you are shipping a new vmwgfx
+ userspace driver that supports using the kernel driver.
+
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 4d9edea..ba2c35d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -182,8 +182,9 @@
{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
{0, 0, 0}
};
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
-static int enable_fbdev;
+static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON);
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
@@ -1154,6 +1155,11 @@
.open = vmw_driver_open,
.preclose = vmw_preclose,
.postclose = vmw_postclose,
+
+ .dumb_create = vmw_dumb_create,
+ .dumb_map_offset = vmw_dumb_map_offset,
+ .dumb_destroy = vmw_dumb_destroy,
+
.fops = &vmwgfx_driver_fops,
.name = VMWGFX_DRIVER_NAME,
.desc = VMWGFX_DRIVER_DESC,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index d0f2c07..29c984f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -645,6 +645,16 @@
int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int vmw_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle,
+ uint64_t *offset);
+int vmw_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev,
+ uint32_t handle);
/**
* Overlay control - vmwgfx_overlay.c
*/
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 22bf9a2..2c6ffe0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1917,3 +1917,76 @@
vmw_resource_unreference(&res);
return ret;
}
+
+
+int vmw_dumb_create(struct drm_file *file_priv,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct vmw_master *vmaster = vmw_master(file_priv->master);
+ struct vmw_user_dma_buffer *vmw_user_bo;
+ struct ttm_buffer_object *tmp;
+ int ret;
+
+ args->pitch = args->width * ((args->bpp + 7) / 8);
+ args->size = args->pitch * args->height;
+
+ vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL);
+ if (vmw_user_bo == NULL)
+ return -ENOMEM;
+
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (ret != 0) {
+ kfree(vmw_user_bo);
+ return ret;
+ }
+
+ ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size,
+ &vmw_vram_sys_placement, true,
+ &vmw_user_dmabuf_destroy);
+ if (ret != 0)
+ goto out_no_dmabuf;
+
+ tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
+ ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
+ &vmw_user_bo->base,
+ false,
+ ttm_buffer_type,
+ &vmw_user_dmabuf_release, NULL);
+ if (unlikely(ret != 0))
+ goto out_no_base_object;
+
+ args->handle = vmw_user_bo->base.hash.key;
+
+out_no_base_object:
+ ttm_bo_unref(&tmp);
+out_no_dmabuf:
+ ttm_read_unlock(&vmaster->lock);
+ return ret;
+}
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+ struct drm_device *dev, uint32_t handle,
+ uint64_t *offset)
+{
+ struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ struct vmw_dma_buffer *out_buf;
+ int ret;
+
+ ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf);
+ if (ret != 0)
+ return -EINVAL;
+
+ *offset = out_buf->base.addr_space_offset;
+ vmw_dmabuf_unreference(&out_buf);
+ return 0;
+}
+
+int vmw_dumb_destroy(struct drm_file *file_priv,
+ struct drm_device *dev,
+ uint32_t handle)
+{
+ return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+ handle, TTM_REF_USAGE);
+}
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 7f3f4a3..6021482 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -69,22 +69,6 @@
u16 regs[INA2XX_MAX_REGISTERS];
};
-int ina2xx_read_word(struct i2c_client *client, int reg)
-{
- int val = i2c_smbus_read_word_data(client, reg);
- if (unlikely(val < 0)) {
- dev_dbg(&client->dev,
- "Failed to read register: %d\n", reg);
- return val;
- }
- return be16_to_cpu(val);
-}
-
-void ina2xx_write_word(struct i2c_client *client, int reg, int data)
-{
- i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
-}
-
static struct ina2xx_data *ina2xx_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -102,7 +86,7 @@
/* Read all registers */
for (i = 0; i < data->registers; i++) {
- int rv = ina2xx_read_word(client, i);
+ int rv = i2c_smbus_read_word_swapped(client, i);
if (rv < 0) {
ret = ERR_PTR(rv);
goto abort;
@@ -279,22 +263,26 @@
switch (data->kind) {
case ina219:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA219_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 13 in datasheet) */
- ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 40960000 / shunt);
dev_info(&client->dev,
"power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA219_REGISTERS;
break;
case ina226:
/* device configuration */
- ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT);
+ i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ INA226_CONFIG_DEFAULT);
/* set current LSB to 1mA, shunt is in uOhms */
/* (equation 1 in datasheet)*/
- ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt);
+ i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ 5120000 / shunt);
dev_info(&client->dev,
"power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
data->registers = INA226_REGISTERS;
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 0018c7d..1a174f0 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -44,12 +44,13 @@
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct twl4030_madc_request req;
+ struct twl4030_madc_request req = {
+ .channels = 1 << attr->index,
+ .method = TWL4030_MADC_SW2,
+ .type = TWL4030_MADC_WAIT,
+ };
long val;
- req.channels = (1 << attr->index);
- req.method = TWL4030_MADC_SW2;
- req.func_cb = NULL;
val = twl4030_madc_conversion(&req);
if (val < 0)
return val;
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1..6f5f98d 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -476,17 +476,17 @@
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
- if (pca_data->i2c_clock > 10000) {
+ if (pca_data->i2c_clock > 1000000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 4000) {
+ } else if (pca_data->i2c_clock > 400000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 1000) {
+ } else if (pca_data->i2c_clock > 100000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b4aaa1b..42d9fdd 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -104,6 +104,7 @@
DH89xxCC (PCH)
Panther Point (PCH)
Lynx Point (PCH)
+ Lynx Point-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -354,9 +355,13 @@
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
+config I2C_DESIGNWARE_CORE
+ tristate
+
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -367,6 +372,7 @@
config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -545,7 +551,7 @@
config I2C_PNX
tristate "I2C bus support for Philips PNX and NXP LPC targets"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ depends on ARCH_LPC32XX
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ce3c2be..37c4182 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,10 +33,11 @@
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 1e48bec..7b8ebbe 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,6 +25,7 @@
* ----------------------------------------------------------------------------
*
*/
+#include <linux/export.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -316,6 +317,7 @@
dw_writel(dev, dev->master_cfg , DW_IC_CON);
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_dw_init);
/*
* Waiting for bus not busy
@@ -568,12 +570,14 @@
return ret;
}
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
u32 i2c_dw_func(struct i2c_adapter *adap)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
return dev->functionality;
}
+EXPORT_SYMBOL_GPL(i2c_dw_func);
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
{
@@ -678,17 +682,20 @@
return IRQ_HANDLED;
}
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
void i2c_dw_enable(struct dw_i2c_dev *dev)
{
/* Enable the adapter */
dw_writel(dev, 1, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
@@ -699,18 +706,22 @@
dw_writel(dev, 0, DW_IC_INTR_MASK);
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
void i2c_dw_clear_int(struct dw_i2c_dev *dev)
{
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
void i2c_dw_disable_int(struct dw_i2c_dev *dev)
{
dw_writel(dev, 0, DW_IC_INTR_MASK);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_COMP_PARAM_1);
}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 898dcf9..33e9b0c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,6 +52,7 @@
DH89xxCC (PCH) 0x2330 32 hard yes yes yes
Panther Point (PCH) 0x1e22 32 hard yes yes yes
Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -155,6 +156,7 @@
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
struct i801_priv {
struct i2c_adapter adapter;
@@ -771,6 +773,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 93f147a..2f99613 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -4,13 +4,13 @@
/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
* <Peter dot Milne at D hyphen TACQ dot com>
*
- * With acknowledgements to i2c-algo-ibm_ocp.c by
+ * With acknowledgements to i2c-algo-ibm_ocp.c by
* Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
*
* And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
*
* Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
- *
+ *
* And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
*
@@ -39,14 +39,15 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include "i2c-iop3xx.h"
/* global unit counter */
static int i2c_id;
-static inline unsigned char
-iic_cook_addr(struct i2c_msg *msg)
+static inline unsigned char
+iic_cook_addr(struct i2c_msg *msg)
{
unsigned char addr;
@@ -55,38 +56,38 @@
if (msg->flags & I2C_M_RD)
addr |= 1;
- return addr;
+ return addr;
}
-static void
+static void
iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
/* Follows devman 9.3 */
__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
-}
+}
-static void
+static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
- /*
+ /*
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
- gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+ gpio_set_value(7, 0);
+ gpio_set_value(6, 0);
} else {
- gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+ gpio_set_value(5, 0);
+ gpio_set_value(4, 0);
}
#endif
/* NB SR bits not same position as CR IE bits :-( */
- iop3xx_adap->SR_enabled =
+ iop3xx_adap->SR_enabled =
IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
@@ -96,23 +97,23 @@
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-static void
+static void
iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
-
- cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
+
+ cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-/*
- * NB: the handler has to clear the source of the interrupt!
+/*
+ * NB: the handler has to clear the source of the interrupt!
* Then it passes the SR flags of interest to BH via adap data
*/
-static irqreturn_t
-iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
+static irqreturn_t
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
@@ -126,7 +127,7 @@
}
/* check all error conditions, clear them , report most important */
-static int
+static int
iop3xx_i2c_error(u32 sr)
{
int rc = 0;
@@ -135,12 +136,12 @@
if ( !rc ) rc = -I2C_ERR_BERR;
}
if ((sr & IOP3XX_ISR_ALD)) {
- if ( !rc ) rc = -I2C_ERR_ALD;
+ if ( !rc ) rc = -I2C_ERR_ALD;
}
- return rc;
+ return rc;
}
-static inline u32
+static inline u32
iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long flags;
@@ -161,8 +162,8 @@
typedef int (* compare_func)(unsigned test, unsigned mask);
/* returns 1 on correct comparison */
-static int
-iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
unsigned flags, unsigned* status,
compare_func compare)
{
@@ -192,47 +193,47 @@
}
/*
- * Concrete compare_funcs
+ * Concrete compare_funcs
*/
-static int
+static int
all_bits_clear(unsigned test, unsigned mask)
{
return (test & mask) == 0;
}
-static int
+static int
any_bits_set(unsigned test, unsigned mask)
{
return (test & mask) != 0;
}
-static int
+static int
iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
+ return iop3xx_i2c_wait_event(
iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
}
-static int
-iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
struct i2c_msg* msg)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -247,7 +248,7 @@
}
__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
-
+
cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
@@ -257,8 +258,8 @@
return rc;
}
-static int
-iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
+static int
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -277,10 +278,10 @@
rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
return rc;
-}
+}
-static int
-iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
+static int
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -304,19 +305,19 @@
return rc;
}
-static int
+static int
iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int ii;
int rc = 0;
- for (ii = 0; rc == 0 && ii != count; ++ii)
+ for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
return rc;
}
-static int
+static int
iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -325,7 +326,7 @@
for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
-
+
return rc;
}
@@ -336,8 +337,8 @@
* Each transfer (i.e. a read or a write) is separated by a repeated start
* condition.
*/
-static int
-iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
+static int
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int rc;
@@ -357,8 +358,8 @@
/*
* master_xfer() - main read/write entry
*/
-static int
-iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+static int
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
int num)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -375,14 +376,14 @@
}
iop3xx_i2c_transaction_cleanup(iop3xx_adap);
-
+
if(ret)
return ret;
- return im;
+ return im;
}
-static u32
+static u32
iop3xx_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -393,11 +394,11 @@
.functionality = iop3xx_i2c_func,
};
-static int
+static int
iop3xx_i2c_remove(struct platform_device *pdev)
{
struct i2c_adapter *padapter = platform_get_drvdata(pdev);
- struct i2c_algo_iop3xx_data *adapter_data =
+ struct i2c_algo_iop3xx_data *adapter_data =
(struct i2c_algo_iop3xx_data *)padapter->algo_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
@@ -419,7 +420,7 @@
return 0;
}
-static int
+static int
iop3xx_i2c_probe(struct platform_device *pdev)
{
struct resource *res;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 088c5c1..51f05b8 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -365,10 +365,6 @@
struct device_node *node = dev->of_node;
int ret;
- if (!node)
- return -EINVAL;
-
- i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -419,10 +415,13 @@
return err;
i2c->dev = dev;
+ i2c->speed = &mxs_i2c_95kHz_config;
- err = mxs_i2c_get_ofdata(i2c);
- if (err)
- return err;
+ if (dev->of_node) {
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+ }
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d54416..8488bdd 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -48,8 +48,9 @@
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
+ mcntrl_drsie = 0x00000010,
+ mcntrl_rffie = 0x00000020,
+ mcntrl_daie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
@@ -290,31 +291,37 @@
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&alg_data->adapter.dev,
- "%s(): Write dummy data to fill Rx-fifo...\n",
- __func__);
+ /* 'Asking' is done asynchronously, e.g. dummy TX of several
+ * bytes is done before the first actual RX arrives in FIFO.
+ * Therefore, ordered bytes (via TX) are counted separately.
+ */
+ if (alg_data->mif.order) {
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
- if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
+ if (alg_data->mif.order == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
/*
- * Enable interrupt RFDAIE (data in Rx fifo),
- * and disable DRMIE (need data for Tx)
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
*/
- ctl = ioread32(I2C_REG_CTL(alg_data));
- ctl |= mcntrl_rffie | mcntrl_daie;
- ctl &= ~mcntrl_drmie;
- iowrite32(ctl, I2C_REG_CTL(alg_data));
+ iowrite32(val, I2C_REG_TX(alg_data));
+ alg_data->mif.order--;
}
-
- /*
- * Now we'll 'ask' for data:
- * For each byte we want to receive, we must
- * write a (dummy) byte to the Tx-FIFO.
- */
- iowrite32(val, I2C_REG_TX(alg_data));
-
return 0;
}
@@ -514,6 +521,7 @@
alg_data->mif.buf = pmsg->buf;
alg_data->mif.len = pmsg->len;
+ alg_data->mif.order = pmsg->len;
alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
I2C_SMBUS_READ : I2C_SMBUS_WRITE;
alg_data->mif.ret = 0;
@@ -566,6 +574,7 @@
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
+ alg_data->mif.order = 0;
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 2efa56c..2091ae8f 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -637,6 +637,22 @@
}
/*
+ * This function is only needed for mutex_lock_nested, so it is never
+ * called unless locking correctness checking is enabled. Thus we
+ * make it inline to avoid a compiler warning. That's what gcc ends up
+ * doing anyway.
+ */
+static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+{
+ unsigned int depth = 0;
+
+ while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
+ depth++;
+
+ return depth;
+}
+
+/*
* Let users instantiate I2C devices through sysfs. This can be used when
* platform initialization code doesn't contain the proper data for
* whatever reason. Also useful for drivers that do device detection and
@@ -726,7 +742,8 @@
/* Make sure the device was added through sysfs */
res = -ENOENT;
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
if (client->addr == addr) {
@@ -1073,7 +1090,8 @@
return res;
/* Remove devices instantiated from sysfs */
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index f61780a..3bd5540 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -617,7 +617,7 @@
st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
if (IS_ERR(st->adc_clk)) {
dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
- ret = PTR_ERR(st->clk);
+ ret = PTR_ERR(st->adc_clk);
goto error_disable_clk;
}
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 2bda5f0b..6d6b142 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -37,7 +37,7 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/keypad.h>
+#include <linux/platform_data/keypad-omap.h>
#undef NEW_BOARD_LEARNING_MODE
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index f5fbdf9..45887e3 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -27,7 +27,7 @@
#include <linux/module.h>
#include <asm/mach-types.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c
index fa6ca47..dceaec8 100644
--- a/drivers/isdn/hardware/mISDN/avmfritz.c
+++ b/drivers/isdn/hardware/mISDN/avmfritz.c
@@ -857,8 +857,9 @@
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&fc->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modehdlc(bch, ISDN_P_NONE);
spin_unlock_irqrestore(&fc->lock, flags);
ch->protocol = ISDN_P_NONE;
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 5e402cf2..f027942 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -5059,6 +5059,7 @@
printk(KERN_INFO
"HFC-E1 #%d has overlapping B-channels on fragment #%d\n",
E1_cnt + 1, pt);
+ kfree(hc);
return -EINVAL;
}
maskcheck |= hc->bmask[pt];
@@ -5086,6 +5087,7 @@
if ((poll >> 1) > sizeof(hc->silence_data)) {
printk(KERN_ERR "HFCMULTI error: silence_data too small, "
"please fix\n");
+ kfree(hc);
return -EINVAL;
}
for (i = 0; i < (poll >> 1); i++)
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index 752e082..ccd7d85 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -1406,8 +1406,9 @@
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(hx->ip->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
hscx_mode(hx, ISDN_P_NONE);
spin_unlock_irqrestore(hx->ip->hwlock, flags);
ch->protocol = ISDN_P_NONE;
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index be5973d..182ecf0 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1588,8 +1588,9 @@
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(ich->is->hwlock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
modeisar(ich, ISDN_P_NONE);
spin_unlock_irqrestore(ich->is->hwlock, flags);
ch->protocol = ISDN_P_NONE;
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index c3e3e76..9bcade5 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -812,8 +812,9 @@
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
mode_tiger(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
index 26a86b8..335fe64 100644
--- a/drivers/isdn/hardware/mISDN/w6692.c
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -1054,8 +1054,9 @@
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ cancel_work_sync(&bch->workq);
spin_lock_irqsave(&card->lock, flags);
- mISDN_freebchannel(bch);
+ mISDN_clear_bchannel(bch);
w6692_mode(bc, ISDN_P_NONE);
spin_unlock_irqrestore(&card->lock, flags);
ch->protocol = ISDN_P_NONE;
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
index ef34fd4..2602be2 100644
--- a/drivers/isdn/mISDN/hwchannel.c
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -148,17 +148,16 @@
ch->next_minlen = ch->init_minlen;
ch->maxlen = ch->init_maxlen;
ch->next_maxlen = ch->init_maxlen;
+ skb_queue_purge(&ch->rqueue);
+ ch->rcount = 0;
}
EXPORT_SYMBOL(mISDN_clear_bchannel);
-int
+void
mISDN_freebchannel(struct bchannel *ch)
{
+ cancel_work_sync(&ch->workq);
mISDN_clear_bchannel(ch);
- skb_queue_purge(&ch->rqueue);
- ch->rcount = 0;
- flush_work_sync(&ch->workq);
- return 0;
}
EXPORT_SYMBOL(mISDN_freebchannel);
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index b67a301..ce229ea 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -470,7 +470,8 @@
ret =
mfd_add_devices(chip->dev, 0, &onkey_devs[0],
- ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0);
+ ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
@@ -481,7 +482,7 @@
rtc_devs[0].platform_data = pdata->rtc;
rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata);
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
- ARRAY_SIZE(rtc_devs), NULL, 0);
+ ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out_dev;
diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c
index 6146583..c20a311 100644
--- a/drivers/mfd/88pm805.c
+++ b/drivers/mfd/88pm805.c
@@ -216,7 +216,8 @@
}
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add codec subdev\n");
goto out_codec;
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index d09918c..b73f033 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -637,7 +637,7 @@
bk_devs[i].resources = &bk_resources[j];
ret = mfd_add_devices(chip->dev, 0,
&bk_devs[i], 1,
- &bk_resources[j], 0);
+ &bk_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"backlight subdev\n");
@@ -672,7 +672,7 @@
led_devs[i].resources = &led_resources[j],
ret = mfd_add_devices(chip->dev, 0,
&led_devs[i], 1,
- &led_resources[j], 0);
+ &led_resources[j], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add "
"led subdev\n");
@@ -709,7 +709,7 @@
regulator_devs[i].resources = ®ulator_resources[seq];
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1,
- ®ulator_resources[seq], 0);
+ ®ulator_resources[seq], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out;
@@ -733,7 +733,7 @@
rtc_devs[0].resources = &rtc_resources[0];
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs), &rtc_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add rtc subdev\n");
}
@@ -752,7 +752,7 @@
touch_devs[0].resources = &touch_resources[0];
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs), &touch_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add touch subdev\n");
}
@@ -770,7 +770,7 @@
power_devs[0].num_resources = ARRAY_SIZE(battery_resources);
power_devs[0].resources = &battery_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1,
- &battery_resources[0], chip->irq_base);
+ &battery_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add battery subdev\n");
@@ -779,7 +779,7 @@
power_devs[1].num_resources = ARRAY_SIZE(charger_resources);
power_devs[1].resources = &charger_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1,
- &charger_resources[0], chip->irq_base);
+ &charger_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add charger subdev\n");
@@ -788,7 +788,7 @@
power_devs[2].num_resources = ARRAY_SIZE(preg_resources);
power_devs[2].resources = &preg_resources[0],
ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1,
- &preg_resources[0], chip->irq_base);
+ &preg_resources[0], chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add preg subdev\n");
}
@@ -802,7 +802,7 @@
onkey_devs[0].resources = &onkey_resources[0],
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs), &onkey_resources[0],
- chip->irq_base);
+ chip->irq_base, NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add onkey subdev\n");
}
@@ -815,7 +815,8 @@
codec_devs[0].num_resources = ARRAY_SIZE(codec_resources);
codec_devs[0].resources = &codec_resources[0],
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
- ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0,
+ NULL);
if (ret < 0)
dev_err(chip->dev, "Failed to add codec subdev\n");
}
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 44a3fdb..f1beb49 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -424,7 +424,7 @@
}
ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
- ARRAY_SIZE(aat2870_devs), NULL, 0);
+ ARRAY_SIZE(aat2870_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
goto out_disable;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 78fca29..01781ae 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -946,7 +946,7 @@
}
err = mfd_add_devices(&client->dev, 0, ab3100_devs,
- ARRAY_SIZE(ab3100_devs), NULL, 0);
+ ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
ab3100_setup_debugfs(ab3100);
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 626b4ec..47adf80 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1418,25 +1418,25 @@
ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
ARRAY_SIZE(abx500_common_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500) || is_ab8505(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs,
ARRAY_SIZE(ab9540_ab8505_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
goto out_freeirq;
@@ -1444,7 +1444,7 @@
/* Add battery management devices */
ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
ARRAY_SIZE(ab8500_bm_devs), NULL,
- ab8500->irq_base);
+ ab8500->irq_base, ab8500->domain);
if (ret)
dev_err(ab8500->dev, "error adding bm devices\n");
}
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index c7983e8..1b48f20 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -316,7 +316,7 @@
}
ret = mfd_add_devices(arizona->dev, -1, early_devs,
- ARRAY_SIZE(early_devs), NULL, 0);
+ ARRAY_SIZE(early_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(dev, "Failed to add early children: %d\n", ret);
return ret;
@@ -516,11 +516,11 @@
switch (arizona->type) {
case WM5102:
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
case WM5110:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
- ARRAY_SIZE(wm5102_devs), NULL, 0);
+ ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
}
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 683e18a..62f0883 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -913,14 +913,14 @@
if (pdata->clock_rate) {
ds1wm_pdata.clock_rate = pdata->clock_rate;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_ds1wm, 1, mem, asic->irq_base);
+ &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
if (ret < 0)
goto out;
}
if (mem_sdio && (irq >= 0)) {
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &asic3_cell_mmc, 1, mem_sdio, irq);
+ &asic3_cell_mmc, 1, mem_sdio, irq, NULL);
if (ret < 0)
goto out;
}
@@ -934,7 +934,7 @@
asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
}
ret = mfd_add_devices(&pdev->dev, 0,
- asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0);
+ asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
}
out:
diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c
index 3419e72..2b28213 100644
--- a/drivers/mfd/cs5535-mfd.c
+++ b/drivers/mfd/cs5535-mfd.c
@@ -149,7 +149,7 @@
}
err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells,
- ARRAY_SIZE(cs5535_mfd_cells), NULL, 0);
+ ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL);
if (err) {
dev_err(&pdev->dev, "MFD add devices failed: %d\n", err);
goto err_disable;
diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c
index 2544910..a0a62b2 100644
--- a/drivers/mfd/da9052-core.c
+++ b/drivers/mfd/da9052-core.c
@@ -803,7 +803,7 @@
dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret);
ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
- ARRAY_SIZE(da9052_subdev_info), NULL, 0);
+ ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL);
if (ret)
goto err;
diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index 4e2af2c..45e83a6 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -129,7 +129,7 @@
cell->pdata_size = sizeof(*davinci_vc);
ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells,
- DAVINCI_VC_CELLS, NULL, 0);
+ DAVINCI_VC_CELLS, NULL, 0, NULL);
if (ret != 0) {
dev_err(&pdev->dev, "fail to register client devices\n");
goto fail4;
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 7040a00..6b67edb 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -418,6 +418,9 @@
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+/* Functions definition */
+static void compute_armss_rate(void);
+
/* Spinlocks */
static DEFINE_SPINLOCK(prcmu_lock);
static DEFINE_SPINLOCK(clkout_lock);
@@ -517,6 +520,7 @@
}
};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
@@ -1013,6 +1017,7 @@
(mb1_transfer.ack.arm_opp != opp))
r = -EIO;
+ compute_armss_rate();
mutex_unlock(&mb1_transfer.lock);
return r;
@@ -1612,6 +1617,7 @@
if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
(val & PRCM_PLL_FREQ_DIV2EN) &&
((reg == PRCM_PLLSOC0_FREQ) ||
+ (reg == PRCM_PLLARM_FREQ) ||
(reg == PRCM_PLLDDR_FREQ))))
div *= 2;
@@ -1661,6 +1667,39 @@
else
return 0;
}
+static unsigned long latest_armss_rate;
+static unsigned long armss_rate(void)
+{
+ return latest_armss_rate;
+}
+
+static void compute_armss_rate(void)
+{
+ u32 r;
+ unsigned long rate;
+
+ r = readl(PRCM_ARM_CHGCLKREQ);
+
+ if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
+ /* External ARMCLKFIX clock */
+
+ rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
+
+ /* Check PRCM_ARM_CHGCLKREQ divider */
+ if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
+ rate /= 2;
+
+ /* Check PRCM_ARMCLKFIX_MGT divider */
+ r = readl(PRCM_ARMCLKFIX_MGT);
+ r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ rate /= r;
+
+ } else {/* ARM PLL */
+ rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
+ }
+
+ latest_armss_rate = rate;
+}
static unsigned long dsiclk_rate(u8 n)
{
@@ -1707,6 +1746,8 @@
return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLSOC1)
return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_ARMSS)
+ return armss_rate();
else if (clock == PRCMU_PLLDDR)
return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
else if (clock == PRCMU_PLLDSI)
@@ -2693,6 +2734,7 @@
handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+ compute_armss_rate();
}
static void __init init_prcm_registers(void)
@@ -3010,7 +3052,7 @@
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
- ARRAY_SIZE(db8500_prcmu_devs), NULL, 0);
+ ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL);
if (err) {
pr_err("prcmu: Failed to add subdevices\n");
return err;
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 23108a6..79c76eb 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -61,7 +61,8 @@
#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16)
#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
@@ -140,6 +141,7 @@
/* PRCMU clock/PLL/reset registers */
#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080)
#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088)
#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C)
#define PRCM_PLL_FREQ_D_SHIFT 0
#define PRCM_PLL_FREQ_D_MASK BITS(0, 7)
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 04c7093..9e5453d 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -168,7 +168,7 @@
/* the first 5 PASIC3 registers control the DS1WM */
ds1wm_resources[0].end = (5 << asic->bus_shift) - 1;
ret = mfd_add_devices(&pdev->dev, pdev->id,
- &ds1wm_cell, 1, r, irq);
+ &ds1wm_cell, 1, r, irq, NULL);
if (ret < 0)
dev_warn(dev, "failed to register DS1WM\n");
}
@@ -176,7 +176,8 @@
if (pdata && pdata->led_pdata) {
led_cell.platform_data = pdata->led_pdata;
led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo);
- ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0);
+ ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r,
+ 0, NULL);
if (ret < 0)
dev_warn(dev, "failed to register LED device\n");
}
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
index 59df558..266bdc5b 100644
--- a/drivers/mfd/intel_msic.c
+++ b/drivers/mfd/intel_msic.c
@@ -344,13 +344,13 @@
continue;
ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
- pdata->irq[i]);
+ pdata->irq[i], NULL);
if (ret)
goto fail;
}
ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
- ARRAY_SIZE(msic_other_devs), NULL, 0);
+ ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
if (ret)
goto fail;
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
index 2ea9998..965c480 100644
--- a/drivers/mfd/janz-cmodio.c
+++ b/drivers/mfd/janz-cmodio.c
@@ -147,7 +147,7 @@
}
return mfd_add_devices(&pdev->dev, 0, priv->cells,
- num_probed, NULL, pdev->irq);
+ num_probed, NULL, pdev->irq, NULL);
}
/*
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 87662a1..c6b6d7d 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -287,7 +287,8 @@
writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
- ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base);
+ ARRAY_SIZE(jz4740_adc_cells), mem_base,
+ irq_base, NULL);
if (ret < 0)
goto err_clk_put;
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 0b2879b..24212f4 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -393,7 +393,8 @@
lm3533_als_devs[0].platform_data = pdata->als;
lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
- ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0);
+ ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
+ 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add ALS device\n");
return ret;
@@ -422,7 +423,7 @@
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
- pdata->num_backlights, NULL, 0);
+ pdata->num_backlights, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add backlight devices\n");
return ret;
@@ -451,7 +452,7 @@
}
ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
- pdata->num_leds, NULL, 0);
+ pdata->num_leds, NULL, 0, NULL);
if (ret) {
dev_err(lm3533->dev, "failed to add LED devices\n");
return ret;
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 027cc8f..092ad4b 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -750,7 +750,7 @@
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
gpio_done:
if (acpi_conflict)
@@ -765,7 +765,6 @@
u32 base_addr_cfg;
u32 base_addr;
int ret;
- bool acpi_conflict = false;
struct resource *res;
/* Setup power management base register */
@@ -780,20 +779,11 @@
res = wdt_io_res(ICH_RES_IO_TCO);
res->start = base_addr + ACPIBASE_TCO_OFF;
res->end = base_addr + ACPIBASE_TCO_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
res = wdt_io_res(ICH_RES_IO_SMI);
res->start = base_addr + ACPIBASE_SMI_OFF;
res->end = base_addr + ACPIBASE_SMI_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
+
lpc_ich_enable_acpi_space(dev);
/*
@@ -813,21 +803,13 @@
res = wdt_mem_res(ICH_RES_MEM_GCS);
res->start = base_addr + ACPIBASE_GCS_OFF;
res->end = base_addr + ACPIBASE_GCS_END;
- ret = acpi_check_resource_conflict(res);
- if (ret) {
- acpi_conflict = true;
- goto wdt_done;
- }
}
lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id);
ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT],
- 1, NULL, 0);
+ 1, NULL, 0, NULL);
wdt_done:
- if (acpi_conflict)
- pr_warn("Resource conflict(s) found affecting %s\n",
- lpc_ich_cells[LPC_WDT].name);
return ret;
}
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index 9f20abc..f6b9c5c 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -127,7 +127,8 @@
lpc_sch_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0,
- lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
+ lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL,
+ 0, NULL);
if (ret)
goto out_dev;
@@ -153,7 +154,8 @@
tunnelcreek_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells,
- ARRAY_SIZE(tunnelcreek_cells), NULL, 0);
+ ARRAY_SIZE(tunnelcreek_cells), NULL,
+ 0, NULL);
}
return ret;
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index c03e12b..d9e24c8 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -126,7 +126,7 @@
max77686_irq_init(max77686);
ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
- ARRAY_SIZE(max77686_devs), NULL, 0);
+ ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c
index 2b40356..1029d01 100644
--- a/drivers/mfd/max77693-irq.c
+++ b/drivers/mfd/max77693-irq.c
@@ -137,6 +137,9 @@
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
else
@@ -149,6 +152,9 @@
const struct max77693_irq_data *irq_data =
irq_to_max77693_irq(max77693, data->irq);
+ if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
+ return;
+
if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
max77693->irq_masks_cur[irq_data->group] |= irq_data->mask;
else
@@ -200,7 +206,7 @@
if (irq_src & MAX77693_IRQSRC_MUIC)
/* MUIC INT1 ~ INT3 */
- max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1,
+ max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1,
MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]);
/* Apply masking */
@@ -255,7 +261,8 @@
{
struct irq_domain *domain;
int i;
- int ret;
+ int ret = 0;
+ u8 intsrc_mask;
mutex_init(&max77693->irqlock);
@@ -287,19 +294,38 @@
&max77693_irq_domain_ops, max77693);
if (!domain) {
dev_err(max77693->dev, "could not create irq domain\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_irq;
}
max77693->irq_domain = domain;
+ /* Unmask max77693 interrupt */
+ ret = max77693_read_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to read PMIC register\n");
+ goto err_irq;
+ }
+
+ intsrc_mask &= ~(MAX77693_IRQSRC_CHG);
+ intsrc_mask &= ~(MAX77693_IRQSRC_FLASH);
+ intsrc_mask &= ~(MAX77693_IRQSRC_MUIC);
+ ret = max77693_write_reg(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask);
+ if (ret < 0) {
+ dev_err(max77693->dev, "fail to write PMIC register\n");
+ goto err_irq;
+ }
+
ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"max77693-irq", max77693);
-
if (ret)
dev_err(max77693->dev, "Failed to request IRQ %d: %d\n",
max77693->irq, ret);
- return 0;
+err_irq:
+ return ret;
}
void max77693_irq_exit(struct max77693_dev *max77693)
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index a1811cb..cc5155e 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -152,6 +152,20 @@
max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
i2c_set_clientdata(max77693->haptic, max77693);
+ /*
+ * Initialize register map for MUIC device because use regmap-muic
+ * instance of MUIC device when irq of max77693 is initialized
+ * before call max77693-muic probe() function.
+ */
+ max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic,
+ &max77693_regmap_config);
+ if (IS_ERR(max77693->regmap_muic)) {
+ ret = PTR_ERR(max77693->regmap_muic);
+ dev_err(max77693->dev,
+ "failed to allocate register map: %d\n", ret);
+ goto err_regmap;
+ }
+
ret = max77693_irq_init(max77693);
if (ret < 0)
goto err_irq;
@@ -159,7 +173,7 @@
pm_runtime_set_active(max77693->dev);
ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
- ARRAY_SIZE(max77693_devs), NULL, 0);
+ ARRAY_SIZE(max77693_devs), NULL, 0, NULL);
if (ret < 0)
goto err_mfd;
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index 825a7f0..ee53757 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -598,7 +598,7 @@
ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
ARRAY_SIZE(rtc_devs),
- &rtc_resources[0], chip->irq_base);
+ &rtc_resources[0], chip->irq_base, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add rtc subdev\n");
goto out;
@@ -606,7 +606,7 @@
ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
ARRAY_SIZE(onkey_devs),
- &onkey_resources[0], 0);
+ &onkey_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add onkey subdev\n");
goto out_dev;
@@ -615,7 +615,7 @@
if (pdata) {
ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0],
ARRAY_SIZE(regulator_devs),
- ®ulator_resources[0], 0);
+ ®ulator_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regulator subdev\n");
goto out_dev;
@@ -625,7 +625,7 @@
if (pdata && pdata->backlight) {
ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0],
ARRAY_SIZE(backlight_devs),
- &backlight_resources[0], 0);
+ &backlight_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add backlight subdev\n");
goto out_dev;
@@ -635,7 +635,7 @@
if (pdata && pdata->power) {
ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
ARRAY_SIZE(power_devs),
- &power_supply_resources[0], 0);
+ &power_supply_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add power supply "
"subdev\n");
@@ -646,7 +646,7 @@
if (pdata && pdata->touch) {
ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
ARRAY_SIZE(touch_devs),
- &touch_resources[0], 0);
+ &touch_resources[0], 0, NULL);
if (ret < 0) {
dev_err(chip->dev, "Failed to add touch subdev\n");
goto out_dev;
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 10b629c..f1235170 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -160,7 +160,7 @@
mfd_add_devices(max8997->dev, -1, max8997_devs,
ARRAY_SIZE(max8997_devs),
- NULL, 0);
+ NULL, 0, NULL);
/*
* TODO: enable others (flash, muic, rtc, battery, ...) and
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 6ef56d2..d7218cc 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -161,13 +161,13 @@
switch (id->driver_data) {
case TYPE_LP3974:
ret = mfd_add_devices(max8998->dev, -1,
- lp3974_devs, ARRAY_SIZE(lp3974_devs),
- NULL, 0);
+ lp3974_devs, ARRAY_SIZE(lp3974_devs),
+ NULL, 0, NULL);
break;
case TYPE_MAX8998:
ret = mfd_add_devices(max8998->dev, -1,
- max8998_devs, ARRAY_SIZE(max8998_devs),
- NULL, 0);
+ max8998_devs, ARRAY_SIZE(max8998_devs),
+ NULL, 0, NULL);
break;
default:
ret = -EINVAL;
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index b801dc7..1ec79b5 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -612,7 +612,7 @@
if (!cell.name)
return -ENOMEM;
- return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL);
}
static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format)
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 0c3a01c..f8b7771 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -74,12 +74,11 @@
static int mfd_add_device(struct device *parent, int id,
const struct mfd_cell *cell,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
struct resource *res;
struct platform_device *pdev;
struct device_node *np = NULL;
- struct irq_domain *domain = NULL;
int ret = -ENOMEM;
int r;
@@ -97,7 +96,6 @@
for_each_child_of_node(parent->of_node, np) {
if (of_device_is_compatible(np, cell->of_compatible)) {
pdev->dev.of_node = np;
- domain = irq_find_host(parent->of_node);
break;
}
}
@@ -177,7 +175,7 @@
int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base)
+ int irq_base, struct irq_domain *domain)
{
int i;
int ret = 0;
@@ -191,7 +189,8 @@
for (i = 0; i < n_devs; i++) {
atomic_set(&cnts[i], 0);
cells[i].usage_count = &cnts[i];
- ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base);
+ ret = mfd_add_device(parent, id, cells + i, mem_base,
+ irq_base, domain);
if (ret)
break;
}
@@ -247,7 +246,8 @@
for (i = 0; i < n_clones; i++) {
cell_entry.name = clones[i];
/* don't give up if a single call fails; just report error */
- if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0))
+ if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0,
+ NULL))
dev_err(dev, "failed to create platform device '%s'\n",
clones[i]);
}
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index c4a69f1..a345f9bb 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -453,7 +453,8 @@
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
- NULL, regmap_irq_chip_get_base(palmas->irq_data));
+ NULL, regmap_irq_chip_get_base(palmas->irq_data),
+ NULL);
kfree(children);
if (ret < 0)
diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c
index cdc1df7..3a8fa88 100644
--- a/drivers/mfd/rc5t583.c
+++ b/drivers/mfd/rc5t583.c
@@ -289,7 +289,7 @@
}
ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
- ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
+ ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
goto err_add_devs;
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index 685d61e..0f70dce 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -87,7 +87,8 @@
rdc321x_wdt_pdata.sb_pdev = pdev;
return mfd_add_devices(&pdev->dev, -1,
- rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0);
+ rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells),
+ NULL, 0, NULL);
}
static void __devexit rdc321x_sb_remove(struct pci_dev *pdev)
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 2988efd..49d361a 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -141,19 +141,19 @@
switch (sec_pmic->device_type) {
case S5M8751X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs,
- ARRAY_SIZE(s5m8751_devs), NULL, 0);
+ ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL);
break;
case S5M8763X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs,
- ARRAY_SIZE(s5m8763_devs), NULL, 0);
+ ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL);
break;
case S5M8767X:
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
- ARRAY_SIZE(s5m8767_devs), NULL, 0);
+ ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
break;
case S2MPS11X:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
- ARRAY_SIZE(s2mps11_devs), NULL, 0);
+ ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
break;
default:
/* If this happens the probe function is problem */
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index d31fed0..d35da68 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -407,7 +407,7 @@
sta2x11_mfd_bar0,
ARRAY_SIZE(sta2x11_mfd_bar0),
&pdev->resource[0],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err);
goto err_disable;
@@ -417,7 +417,7 @@
sta2x11_mfd_bar1,
ARRAY_SIZE(sta2x11_mfd_bar1),
&pdev->resource[1],
- 0);
+ 0, NULL);
if (err) {
dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err);
goto err_disable;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 2dd8d49..c94f521 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -962,7 +962,7 @@
struct mfd_cell *cell, int irq)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
- NULL, stmpe->irq_base + irq);
+ NULL, stmpe->irq_base + irq, NULL);
}
static int __devinit stmpe_devices_init(struct stmpe *stmpe)
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 2d9e879..b32940e 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -388,7 +388,7 @@
ret = mfd_add_devices(&dev->dev, dev->id,
t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
- iomem, t7l66xb->irq_base);
+ iomem, t7l66xb->irq_base, NULL);
if (!ret)
return 0;
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 048bf05..b56ba6b 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -262,8 +262,8 @@
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
- ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_gpio), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
@@ -273,8 +273,8 @@
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
- ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base);
+ ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+ tc3589x->irq_base, NULL);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index d20a284..413c891 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -192,7 +192,7 @@
printk(KERN_INFO "Toshiba tc6387xb initialised\n");
ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
- ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+ ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL);
if (!ret)
return 0;
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 9612264..dcab026 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -700,8 +700,8 @@
tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data);
ret = mfd_add_devices(&dev->dev, dev->id,
- tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
- iomem, tcpd->irq_base);
+ tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
+ iomem, tcpd->irq_base, NULL);
if (!ret)
return 0;
diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
index 4fb0e6c..7c3675a 100644
--- a/drivers/mfd/ti-ssp.c
+++ b/drivers/mfd/ti-ssp.c
@@ -412,7 +412,7 @@
cells[id].data_size = data->pdata_size;
}
- error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
+ error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL);
if (error < 0) {
dev_err(dev, "cannot add mfd cells\n");
goto error_enable;
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index a447f4e..cccc626 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -757,25 +757,25 @@
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg0,
ARRAY_SIZE(timberdale_cells_bar0_cfg0),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER1:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg1,
ARRAY_SIZE(timberdale_cells_bar0_cfg1),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER2:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg2,
ARRAY_SIZE(timberdale_cells_bar0_cfg2),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
case TIMB_HW_VER3:
err = mfd_add_devices(&dev->dev, -1,
timberdale_cells_bar0_cfg3,
ARRAY_SIZE(timberdale_cells_bar0_cfg3),
- &dev->resource[0], msix_entries[0].vector);
+ &dev->resource[0], msix_entries[0].vector, NULL);
break;
default:
dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n",
@@ -792,7 +792,7 @@
err = mfd_add_devices(&dev->dev, 0,
timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1),
- &dev->resource[1], msix_entries[0].vector);
+ &dev->resource[1], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
@@ -803,7 +803,7 @@
((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) {
err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2,
ARRAY_SIZE(timberdale_cells_bar2),
- &dev->resource[2], msix_entries[0].vector);
+ &dev->resource[2], msix_entries[0].vector, NULL);
if (err) {
dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
goto err_mfd2;
diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c
index a293b97..14051bd 100644
--- a/drivers/mfd/tps6105x.c
+++ b/drivers/mfd/tps6105x.c
@@ -188,7 +188,7 @@
}
ret = mfd_add_devices(&client->dev, 0, tps6105x_cells,
- ARRAY_SIZE(tps6105x_cells), NULL, 0);
+ ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL);
if (ret)
goto fail;
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
index 33ba772..1b20349 100644
--- a/drivers/mfd/tps6507x.c
+++ b/drivers/mfd/tps6507x.c
@@ -100,7 +100,7 @@
ret = mfd_add_devices(tps6507x->dev, -1,
tps6507x_devs, ARRAY_SIZE(tps6507x_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 80e24f4..50fd87c 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -292,7 +292,7 @@
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL, 0);
+ ARRAY_SIZE(tps65090s), NULL, 0, NULL);
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
index 61c097a..a95e942 100644
--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -24,11 +24,18 @@
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
-#include <linux/regulator/of_regulator.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
+static struct mfd_cell tps65217s[] = {
+ {
+ .name = "tps65217-pmic",
+ },
+};
+
/**
* tps65217_reg_read: Read a single tps65217 register.
*
@@ -133,83 +140,48 @@
}
EXPORT_SYMBOL_GPL(tps65217_clear_bits);
-#ifdef CONFIG_OF
-static struct of_regulator_match reg_matches[] = {
- { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
- { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
- { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
- { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
- { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
- { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
- { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
-};
-
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- struct device_node *node = client->dev.of_node;
- struct tps65217_board *pdata;
- struct device_node *regs;
- int count = ARRAY_SIZE(reg_matches);
- int ret, i;
-
- regs = of_find_node_by_name(node, "regulators");
- if (!regs)
- return NULL;
-
- ret = of_regulator_match(&client->dev, regs, reg_matches, count);
- of_node_put(regs);
- if ((ret < 0) || (ret > count))
- return NULL;
-
- count = ret;
- pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- for (i = 0; i < count; i++) {
- if (!reg_matches[i].init_data || !reg_matches[i].of_node)
- continue;
-
- pdata->tps65217_init_data[i] = reg_matches[i].init_data;
- pdata->of_node[i] = reg_matches[i].of_node;
- }
-
- return pdata;
-}
-
-static struct of_device_id tps65217_of_match[] = {
- { .compatible = "ti,tps65217", },
- { },
-};
-#else
-static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
-{
- return NULL;
-}
-#endif
-
static struct regmap_config tps65217_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
+static const struct of_device_id tps65217_of_match[] = {
+ { .compatible = "ti,tps65217", .data = (void *)TPS65217 },
+ { /* sentinel */ },
+};
+
static int __devinit tps65217_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
- struct regulator_init_data *reg_data;
- struct tps65217_board *pdata = client->dev.platform_data;
- int i, ret;
unsigned int version;
+ unsigned int chip_id = ids->driver_data;
+ const struct of_device_id *match;
+ int ret;
- if (!pdata && client->dev.of_node)
- pdata = tps65217_parse_dt(client);
+ if (client->dev.of_node) {
+ match = of_match_device(tps65217_of_match, &client->dev);
+ if (!match) {
+ dev_err(&client->dev,
+ "Failed to find matching dt id\n");
+ return -EINVAL;
+ }
+ chip_id = (unsigned int)match->data;
+ }
+
+ if (!chip_id) {
+ dev_err(&client->dev, "id is null.\n");
+ return -ENODEV;
+ }
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
- tps->pdata = pdata;
+ i2c_set_clientdata(client, tps);
+ tps->dev = &client->dev;
+ tps->id = chip_id;
+
tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
@@ -218,8 +190,12 @@
return ret;
}
- i2c_set_clientdata(client, tps);
- tps->dev = &client->dev;
+ ret = mfd_add_devices(tps->dev, -1, tps65217s,
+ ARRAY_SIZE(tps65217s), NULL, 0, NULL);
+ if (ret < 0) {
+ dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret);
+ return ret;
+ }
ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version);
if (ret < 0) {
@@ -232,41 +208,21 @@
(version & TPS65217_CHIPID_CHIP_MASK) >> 4,
version & TPS65217_CHIPID_REV_MASK);
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
- struct platform_device *pdev;
-
- pdev = platform_device_alloc("tps65217-pmic", i);
- if (!pdev) {
- dev_err(tps->dev, "Cannot create regulator %d\n", i);
- continue;
- }
-
- pdev->dev.parent = tps->dev;
- pdev->dev.of_node = pdata->of_node[i];
- reg_data = pdata->tps65217_init_data[i];
- platform_device_add_data(pdev, reg_data, sizeof(*reg_data));
- tps->regulator_pdev[i] = pdev;
-
- platform_device_add(pdev);
- }
-
return 0;
}
static int __devexit tps65217_remove(struct i2c_client *client)
{
struct tps65217 *tps = i2c_get_clientdata(client);
- int i;
- for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
- platform_device_unregister(tps->regulator_pdev[i]);
+ mfd_remove_devices(tps->dev);
return 0;
}
static const struct i2c_device_id tps65217_id_table[] = {
- {"tps65217", 0xF0},
- {/* end of list */}
+ {"tps65217", TPS65217},
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, tps65217_id_table);
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 353c348..345960ca 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps6586x.h>
@@ -346,6 +347,7 @@
#ifdef CONFIG_OF
static struct of_regulator_match tps6586x_matches[] = {
+ { .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS },
{ .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 },
{ .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 },
{ .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 },
@@ -369,6 +371,7 @@
struct tps6586x_platform_data *pdata;
struct tps6586x_subdev_info *devs;
struct device_node *regs;
+ const char *sys_rail_name = NULL;
unsigned int count;
unsigned int i, j;
int err;
@@ -391,12 +394,22 @@
return NULL;
for (i = 0, j = 0; i < num && j < count; i++) {
+ struct regulator_init_data *reg_idata;
+
if (!tps6586x_matches[i].init_data)
continue;
+ reg_idata = tps6586x_matches[i].init_data;
devs[j].name = "tps6586x-regulator";
devs[j].platform_data = tps6586x_matches[i].init_data;
devs[j].id = (int)tps6586x_matches[i].driver_data;
+ if (devs[j].id == TPS6586X_ID_SYS)
+ sys_rail_name = reg_idata->constraints.name;
+
+ if ((devs[j].id == TPS6586X_ID_LDO_5) ||
+ (devs[j].id == TPS6586X_ID_LDO_RTC))
+ reg_idata->supply_regulator = sys_rail_name;
+
devs[j].of_node = tps6586x_matches[i].of_node;
j++;
}
@@ -493,7 +506,8 @@
}
ret = mfd_add_devices(tps6586x->dev, -1,
- tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0);
+ tps6586x_cell, ARRAY_SIZE(tps6586x_cell),
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);
goto err_mfd_add;
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 1c56379..d3ce4d5 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -254,7 +254,7 @@
ret = mfd_add_devices(tps65910->dev, -1,
tps65910s, ARRAY_SIZE(tps65910s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0) {
dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
return ret;
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 74fd8cb..4658b5b 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -146,7 +146,7 @@
ret = mfd_add_devices(tps65912->dev, -1,
tps65912s, ARRAY_SIZE(tps65912s),
- NULL, 0);
+ NULL, 0, NULL);
if (ret < 0)
goto err;
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index f462ff2..9d3a0bc 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -46,8 +46,6 @@
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
-#include <plat/cpu.h>
-
#include "twl-core.h"
/*
@@ -1134,12 +1132,7 @@
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap2430())
- osc = clk_get(dev, "osc_ck");
- else
- osc = clk_get(dev, "osc_sys_ck");
-
+ osc = clk_get(dev, "fck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
@@ -1149,18 +1142,6 @@
rate = clk_get_rate(osc);
clk_put(osc);
-#else
- /* REVISIT for non-OMAP systems, pass the clock rate from
- * board init code, using platform_data.
- */
- osc = ERR_PTR(-EIO);
-
- printk(KERN_WARNING "Skipping twl internal clock init and "
- "using bootloader value (unknown osc rate)\n");
-
- return;
-#endif
-
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
@@ -1222,10 +1203,23 @@
{
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
+ struct platform_device *pdev;
int irq_base = 0;
int status;
unsigned i, num_slaves;
+ pdev = platform_device_alloc(DRIVER_NAME, -1);
+ if (!pdev) {
+ dev_err(&client->dev, "can't alloc pdev\n");
+ return -ENOMEM;
+ }
+
+ status = platform_device_add(pdev);
+ if (status) {
+ platform_device_put(pdev);
+ return status;
+ }
+
if (node && !pdata) {
/*
* XXX: Temporary pdata until the information is correctly
@@ -1234,23 +1228,30 @@
pdata = devm_kzalloc(&client->dev,
sizeof(struct twl4030_platform_data),
GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ if (!pdata) {
+ status = -ENOMEM;
+ goto free;
+ }
}
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
- return -EINVAL;
+ status = -EINVAL;
+ goto free;
}
+ platform_set_drvdata(pdev, pdata);
+
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
- return -EIO;
+ status = -EIO;
+ goto free;
}
if (inuse) {
dev_dbg(&client->dev, "driver is already in use\n");
- return -EBUSY;
+ status = -EBUSY;
+ goto free;
}
if ((id->driver_data) & TWL6030_CLASS) {
@@ -1285,7 +1286,7 @@
inuse = true;
/* setup clock framework */
- clocks_init(&client->dev, pdata->clock);
+ clocks_init(&pdev->dev, pdata->clock);
/* read TWL IDCODE Register */
if (twl_id == TWL4030_CLASS_ID) {
@@ -1335,6 +1336,9 @@
fail:
if (status < 0)
twl_remove(client);
+free:
+ if (status < 0)
+ platform_device_unregister(pdev);
return status;
}
diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index 838ce4e..77c9acb 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -223,7 +223,7 @@
if (childs)
ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells,
- childs, NULL, 0);
+ childs, NULL, 0, NULL);
else {
dev_err(&pdev->dev, "No platform data found for childs\n");
ret = -ENODEV;
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index b0fad0f..3dca5c1 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -632,7 +632,7 @@
}
ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
- NULL, 0);
+ NULL, 0, NULL);
if (ret)
goto mfd_err;
diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c
index 872aff2..b9a636d 100644
--- a/drivers/mfd/vx855.c
+++ b/drivers/mfd/vx855.c
@@ -102,7 +102,7 @@
vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3;
ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells),
- NULL, 0);
+ NULL, 0, NULL);
/* we always return -ENODEV here in order to enable other
* drivers like old, not-yet-platform_device ported i2c-viapro */
diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c
index f39b756..86e0e43 100644
--- a/drivers/mfd/wl1273-core.c
+++ b/drivers/mfd/wl1273-core.c
@@ -241,7 +241,7 @@
__func__, children);
r = mfd_add_devices(&client->dev, -1, core->cells,
- children, NULL, 0);
+ children, NULL, 0, NULL);
if (r)
goto err;
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 946698f..3017310 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -1813,27 +1813,27 @@
case WM8310:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8310_devs, ARRAY_SIZE(wm8310_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8311:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8311_devs, ARRAY_SIZE(wm8311_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8312:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8312_devs, ARRAY_SIZE(wm8312_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (!pdata || !pdata->disable_touch)
mfd_add_devices(wm831x->dev, wm831x_num,
touch_devs, ARRAY_SIZE(touch_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
case WM8320:
@@ -1842,7 +1842,7 @@
case WM8326:
ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
- NULL, 0);
+ NULL, 0, NULL);
break;
default:
@@ -1867,7 +1867,7 @@
if (ret & WM831X_XTAL_ENA) {
ret = mfd_add_devices(wm831x->dev, wm831x_num,
rtc_devs, ARRAY_SIZE(rtc_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
goto err_irq;
@@ -1880,7 +1880,7 @@
/* Treat errors as non-critical */
ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
ARRAY_SIZE(backlight_devs), NULL,
- 0);
+ 0, NULL);
if (ret < 0)
dev_err(wm831x->dev, "Failed to add backlight: %d\n",
ret);
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 4b7d378..639ca35 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -70,7 +70,7 @@
.pdata_size = sizeof(*wm8400),
};
- return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0);
+ return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL);
}
/*
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index eec74aa..2febf88 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -414,7 +414,7 @@
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_regulator_devs,
ARRAY_SIZE(wm8994_regulator_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err;
@@ -648,7 +648,7 @@
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_devs, ARRAY_SIZE(wm8994_devs),
- NULL, 0);
+ NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err_irq;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 87c0293..c6259a8 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -36,7 +36,6 @@
#include <plat/mmc.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 0810ccc..5393c64 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -27,7 +27,6 @@
#include <asm/gpio.h>
-#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78a524b..a7040af 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -29,7 +29,7 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <mach/hardware.h>
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index c855e7c..d0d1bd4 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -249,20 +249,20 @@
int bcm_umi_nand_inithw(void)
{
/* Configure nand timing parameters */
- REG_UMI_NAND_TCR &= ~0x7ffff;
- REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
+ writel(readl(®_UMI_NAND_TCR) & ~0x7ffff, ®_UMI_NAND_TCR);
+ writel(readl(®_UMI_NAND_TCR) | HW_CFG_NAND_TCR, ®_UMI_NAND_TCR);
#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
/* enable software control of CS */
- REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
+ writel(readl(®_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, ®_UMI_NAND_TCR);
#endif
/* keep NAND chip select asserted */
- REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
+ writel(readl(®_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, ®_UMI_NAND_RCSR);
- REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
+ writel(readl(®_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, ®_UMI_NAND_TCR);
/* enable writes to flash */
- REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
+ writel(readl(®_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, ®_UMI_MMD_ICR);
writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
nand_bcm_umi_wait_till_ready();
diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h
index 198b304..d901866 100644
--- a/drivers/mtd/nand/nand_bcm_umi.h
+++ b/drivers/mtd/nand/nand_bcm_umi.h
@@ -17,7 +17,7 @@
/* ---- Include Files ---------------------------------------------------- */
#include <mach/reg_umi.h>
#include <mach/reg_nand.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
/* ---- Constants and Types ---------------------------------------------- */
#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
@@ -48,7 +48,7 @@
/* Check in device is ready */
static inline int nand_bcm_umi_dev_ready(void)
{
- return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
+ return readl(®_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY;
}
/* Wait until device is ready */
@@ -62,10 +62,11 @@
static inline void nand_bcm_umi_hamming_enable_hwecc(void)
{
/* disable and reset ECC, 512 byte page */
- REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
- REG_UMI_NAND_ECC_CSR_256BYTE);
+ writel(readl(®_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
+ REG_UMI_NAND_ECC_CSR_256BYTE), ®_UMI_NAND_ECC_CSR);
/* enable ECC */
- REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
+ writel(readl(®_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE,
+ ®_UMI_NAND_ECC_CSR);
}
#if NAND_ECC_BCH
@@ -76,18 +77,18 @@
static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, ®_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Enable BCH Write ECC */
static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, ®_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Config number of BCH ECC bytes */
@@ -99,9 +100,9 @@
uint32_t numBits = numEccBytes * 8;
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
- REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
+ REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID,
+ ®_UMI_BCH_CTRL_STATUS);
/* Every correctible bit requires 13 ECC bits */
tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);
@@ -113,23 +114,21 @@
kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);
/* Write the settings */
- REG_UMI_BCH_N = nValue;
- REG_UMI_BCH_T = tValue;
- REG_UMI_BCH_K = kValue;
+ writel(nValue, ®_UMI_BCH_N);
+ writel(tValue, ®_UMI_BCH_T);
+ writel(kValue, ®_UMI_BCH_K);
}
/* Pause during ECC read calculation to skip bytes in OOB */
static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
- REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, ®_UMI_BCH_CTRL_STATUS);
}
/* Resume during ECC read calculation after skipping bytes in OOB */
static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS);
}
/* Poll read ECC calc to check when hardware completes */
@@ -139,7 +138,7 @@
do {
/* wait for ECC to be valid */
- regVal = REG_UMI_BCH_CTRL_STATUS;
+ regVal = readl(®_UMI_BCH_CTRL_STATUS);
} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);
return regVal;
@@ -149,7 +148,7 @@
static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
{
/* wait for ECC to be valid */
- while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
+ while ((readl(®_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
== 0)
;
}
@@ -170,9 +169,9 @@
if (pageSize != NAND_DATA_ACCESS_SIZE) {
/* skip BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
@@ -180,9 +179,9 @@
while (numToRead > numEccBytes) {
/* skip free oob region */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
@@ -193,11 +192,11 @@
while (numToRead > 11) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(®_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(®_NAND_DATA8);
#endif
numToRead--;
}
@@ -207,9 +206,9 @@
if (numToRead == 11) {
/* read BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(®_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(®_NAND_DATA8);
#endif
numToRead--;
}
@@ -219,11 +218,11 @@
nand_bcm_umi_bch_resume_read_ecc_calc();
while (numToRead) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(®_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(®_NAND_DATA8);
#endif
numToRead--;
}
@@ -255,7 +254,7 @@
if (pageSize == NAND_DATA_ACCESS_SIZE) {
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(®_UMI_BCH_WR_ECC_3);
/* Usually we skip CM in oob[0,1] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
@@ -268,7 +267,7 @@
eccVal & 0xff); /* ECC 12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(®_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
(eccVal >> 24) & 0xff); /* ECC11 */
@@ -281,7 +280,7 @@
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(®_UMI_BCH_WR_ECC_3);
/* Usually skip CM in oob[1,2] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
@@ -294,7 +293,7 @@
eccVal & 0xff); /* ECC12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(®_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
(eccVal >> 24) & 0xff); /* ECC11 */
@@ -309,7 +308,7 @@
eccVal & 0xff); /* ECC8 */
if (numEccBytes >= 5)
- eccVal = REG_UMI_BCH_WR_ECC_1;
+ eccVal = readl(®_UMI_BCH_WR_ECC_1);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
(eccVal >> 24) & 0xff); /* ECC7 */
@@ -321,7 +320,7 @@
eccVal & 0xff); /* ECC4 */
if (numEccBytes >= 1)
- eccVal = REG_UMI_BCH_WR_ECC_0;
+ eccVal = readl(®_UMI_BCH_WR_ECC_0);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
(eccVal >> 24) & 0xff); /* ECC3 */
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 27293e3..fc81112 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -29,7 +29,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
#define OMAP_NAND_TIMEOUT_MS 5000
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 252aaef..d944d6e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,6 +22,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <mach/dma.h>
#include <plat/pxa3xx_nand.h>
@@ -1032,7 +1034,7 @@
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
struct pxa3xx_nand_host *host;
- struct nand_chip *chip;
+ struct nand_chip *chip = NULL;
struct mtd_info *mtd;
struct resource *r;
int ret, irq, cs;
@@ -1081,21 +1083,31 @@
}
clk_enable(info->clk);
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no resource defined for data DMA\n");
- ret = -ENXIO;
- goto fail_put_clk;
- }
- info->drcmr_dat = r->start;
+ /*
+ * This is a dirty hack to make this driver work from devicetree
+ * bindings. It can be removed once we have a prober DMA controller
+ * framework for DT.
+ */
+ if (pdev->dev.of_node && cpu_is_pxa3xx()) {
+ info->drcmr_dat = 97;
+ info->drcmr_cmd = 99;
+ } else {
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no resource defined for data DMA\n");
+ ret = -ENXIO;
+ goto fail_put_clk;
+ }
+ info->drcmr_dat = r->start;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (r == NULL) {
- dev_err(&pdev->dev, "no resource defined for command DMA\n");
- ret = -ENXIO;
- goto fail_put_clk;
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no resource defined for command DMA\n");
+ ret = -ENXIO;
+ goto fail_put_clk;
+ }
+ info->drcmr_cmd = r->start;
}
- info->drcmr_cmd = r->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -1200,12 +1212,55 @@
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id pxa3xx_nand_dt_ids[] = {
+ { .compatible = "marvell,pxa3xx-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+
+ if (!of_id)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
+ pdata->enable_arbiter = 1;
+ if (of_get_property(np, "marvell,nand-keep-config", NULL))
+ pdata->keep_config = 1;
+ of_property_read_u32(np, "num-cs", &pdata->num_cs);
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
static int pxa3xx_nand_probe(struct platform_device *pdev)
{
struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_part_parser_data ppdata = {};
struct pxa3xx_nand_info *info;
int ret, cs, probe_success;
+ ret = pxa3xx_nand_probe_dt(pdev);
+ if (ret)
+ return ret;
+
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
@@ -1229,8 +1284,9 @@
continue;
}
+ ppdata.of_node = pdev->dev.of_node;
ret = mtd_device_parse_register(info->host[cs]->mtd, NULL,
- NULL, pdata->parts[cs],
+ &ppdata, pdata->parts[cs],
pdata->nr_parts[cs]);
if (!ret)
probe_success = 1;
@@ -1306,6 +1362,7 @@
static struct platform_driver pxa3xx_nand_driver = {
.driver = {
.name = "pxa3xx-nand",
+ .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids),
},
.probe = pxa3xx_nand_probe,
.remove = pxa3xx_nand_remove,
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 9d49b1f..1961be9 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,7 @@
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
#include <plat/dma.h>
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index a580db2..26e7129 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -83,6 +83,11 @@
#define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n))
#define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94)
#define INSTRUCTION_RESET 0xC0
+#define RTS_TXB0 0x01
+#define RTS_TXB1 0x02
+#define RTS_TXB2 0x04
+#define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07))
+
/* MPC251x registers */
#define CANSTAT 0x0e
@@ -397,6 +402,7 @@
static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
int tx_buf_idx)
{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
u32 sid, eid, exide, rtr;
u8 buf[SPI_TRANSFER_BUF_LEN];
@@ -418,7 +424,10 @@
buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
- mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+ /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+ priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+ mcp251x_spi_trans(priv->spi, 1);
}
static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 21b5532..dfd86a5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -710,17 +710,15 @@
prod = txdata->tx_bd_prod;
cons = txdata->tx_bd_cons;
- /* NUM_TX_RINGS = number of "next-page" entries
- It will be used as a threshold */
- used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
+ used = SUB_S16(prod, cons);
#ifdef BNX2X_STOP_ON_ERROR
WARN_ON(used < 0);
- WARN_ON(used > bp->tx_ring_size);
- WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL);
+ WARN_ON(used > txdata->tx_ring_size);
+ WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL);
#endif
- return (s16)(bp->tx_ring_size) - used;
+ return (s16)(txdata->tx_ring_size) - used;
}
static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata)
@@ -1088,6 +1086,7 @@
txdata->txq_index = txq_index;
txdata->tx_cons_sb = tx_cons_sb;
txdata->parent_fp = fp;
+ txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size;
DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n",
txdata->cid, txdata->txq_index);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
index 3e4cff9..b926f58 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
@@ -401,11 +401,11 @@
{ 0x70000, 8, RI_ALL_ONLINE },
{ 0x70020, 8184, RI_ALL_OFFLINE },
{ 0x78000, 8192, RI_E3E3B0_OFFLINE },
- { 0x85000, 3, RI_ALL_ONLINE },
- { 0x8501c, 7, RI_ALL_ONLINE },
- { 0x85048, 1, RI_ALL_ONLINE },
- { 0x85200, 32, RI_ALL_ONLINE },
- { 0xb0000, 16384, RI_E1H_ONLINE },
+ { 0x85000, 3, RI_ALL_OFFLINE },
+ { 0x8501c, 7, RI_ALL_OFFLINE },
+ { 0x85048, 1, RI_ALL_OFFLINE },
+ { 0x85200, 32, RI_ALL_OFFLINE },
+ { 0xb0000, 16384, RI_E1H_OFFLINE },
{ 0xc1000, 7, RI_ALL_ONLINE },
{ 0xc103c, 2, RI_E2E3E3B0_ONLINE },
{ 0xc1800, 2, RI_ALL_ONLINE },
@@ -581,17 +581,12 @@
{ 0x140188, 3, RI_E1E1HE2E3_ONLINE },
{ 0x140194, 13, RI_ALL_ONLINE },
{ 0x140200, 6, RI_E1E1HE2E3_ONLINE },
- { 0x140220, 4, RI_E2E3_ONLINE },
- { 0x140240, 4, RI_E2E3_ONLINE },
{ 0x140260, 4, RI_E2E3_ONLINE },
{ 0x140280, 4, RI_E2E3_ONLINE },
- { 0x1402a0, 4, RI_E2E3_ONLINE },
- { 0x1402c0, 4, RI_E2E3_ONLINE },
{ 0x1402e0, 2, RI_E2E3_ONLINE },
{ 0x1402e8, 2, RI_E2E3E3B0_ONLINE },
{ 0x1402f0, 9, RI_E2E3_ONLINE },
{ 0x140314, 44, RI_E3B0_ONLINE },
- { 0x1403d0, 70, RI_E3B0_ONLINE },
{ 0x144000, 4, RI_E1E1H_ONLINE },
{ 0x148000, 4, RI_E1E1H_ONLINE },
{ 0x14c000, 4, RI_E1E1H_ONLINE },
@@ -704,7 +699,6 @@
{ 0x180398, 1, RI_E2E3E3B0_ONLINE },
{ 0x1803a0, 5, RI_E2E3E3B0_ONLINE },
{ 0x1803b4, 2, RI_E3E3B0_ONLINE },
- { 0x180400, 1, RI_ALL_ONLINE },
{ 0x180404, 255, RI_E1E1H_OFFLINE },
{ 0x181000, 4, RI_ALL_ONLINE },
{ 0x181010, 1020, RI_ALL_OFFLINE },
@@ -800,9 +794,9 @@
{ 0x1b905c, 1, RI_E3E3B0_ONLINE },
{ 0x1b9064, 1, RI_E3B0_ONLINE },
{ 0x1b9080, 10, RI_E3B0_ONLINE },
- { 0x1b9400, 14, RI_E2E3E3B0_ONLINE },
- { 0x1b943c, 19, RI_E2E3E3B0_ONLINE },
- { 0x1b9490, 10, RI_E2E3E3B0_ONLINE },
+ { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE },
+ { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE },
+ { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE },
{ 0x1c0000, 2, RI_ALL_ONLINE },
{ 0x200000, 65, RI_ALL_ONLINE },
{ 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE },
@@ -814,7 +808,6 @@
{ 0x200398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x200400, 1, RI_ALL_ONLINE },
{ 0x200404, 255, RI_E1E1H_OFFLINE },
{ 0x202000, 4, RI_ALL_ONLINE },
{ 0x202010, 2044, RI_ALL_OFFLINE },
@@ -921,7 +914,6 @@
{ 0x280398, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x2803a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x280400, 1, RI_ALL_ONLINE },
{ 0x280404, 255, RI_E1E1H_OFFLINE },
{ 0x282000, 4, RI_ALL_ONLINE },
{ 0x282010, 2044, RI_ALL_OFFLINE },
@@ -1031,7 +1023,6 @@
{ 0x300398, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a0, 1, RI_E2E3E3B0_ONLINE },
{ 0x3003a8, 2, RI_E2E3E3B0_ONLINE },
- { 0x300400, 1, RI_ALL_ONLINE },
{ 0x300404, 255, RI_E1E1H_OFFLINE },
{ 0x302000, 4, RI_ALL_ONLINE },
{ 0x302010, 2044, RI_ALL_OFFLINE },
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c37a68d..ebf40cd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -775,7 +775,7 @@
struct bnx2x *bp = netdev_priv(dev);
struct dump_hdr dump_hdr = {0};
- regs->version = 0;
+ regs->version = 1;
memset(p, 0, regs->len);
if (!netif_running(bp->dev))
@@ -1587,6 +1587,12 @@
bp->link_params.req_flow_ctrl[cfg_idx] =
BNX2X_FLOW_CTRL_AUTO;
}
+ bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE;
+ if (epause->rx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX;
+
+ if (epause->tx_pause)
+ bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX;
}
DP(BNX2X_MSG_ETHTOOL,
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index f4beb46..b046beb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -2667,9 +2667,11 @@
return bnx2x_status;
DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");
- if (CHIP_IS_E3(bp))
- bnx2x_update_pfc_xmac(params, vars, 0);
- else {
+
+ if (CHIP_IS_E3(bp)) {
+ if (vars->mac_type == MAC_TYPE_XMAC)
+ bnx2x_update_pfc_xmac(params, vars, 0);
+ } else {
val = REG_RD(bp, MISC_REG_RESET_REG_2);
if ((val &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
@@ -5432,7 +5434,7 @@
switch (speed_mask) {
case GP_STATUS_10M:
vars->line_speed = SPEED_10;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_10TFD;
else
vars->link_status |= LINK_10THD;
@@ -5440,7 +5442,7 @@
case GP_STATUS_100M:
vars->line_speed = SPEED_100;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_100TXFD;
else
vars->link_status |= LINK_100TXHD;
@@ -5449,7 +5451,7 @@
case GP_STATUS_1G:
case GP_STATUS_1G_KX:
vars->line_speed = SPEED_1000;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_1000TFD;
else
vars->link_status |= LINK_1000THD;
@@ -5457,7 +5459,7 @@
case GP_STATUS_2_5G:
vars->line_speed = SPEED_2500;
- if (vars->duplex == DUPLEX_FULL)
+ if (is_duplex == DUPLEX_FULL)
vars->link_status |= LINK_2500TFD;
else
vars->link_status |= LINK_2500THD;
@@ -5531,6 +5533,7 @@
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
if (SINGLE_MEDIA_DIRECT(params)) {
+ vars->duplex = duplex;
bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status);
if (phy->req_line_speed == SPEED_AUTO_NEG)
bnx2x_xgxs_an_resolve(phy, params, vars,
@@ -5625,6 +5628,7 @@
LINK_STATUS_PARALLEL_DETECTION_USED;
}
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+ vars->duplex = duplex;
}
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2105498..211753e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -7561,8 +7561,14 @@
}
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
- if (rc < 0)
+
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+ } else if (rc < 0)
BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
+
return rc;
}
@@ -10294,13 +10300,11 @@
dev_info.port_hw_config[port].
fcoe_wwn_node_name_lower);
} else if (!IS_MF_SD(bp)) {
- u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
-
/*
* Read the WWN info only if the FCoE feature is enabled for
* this function.
*/
- if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+ if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
bnx2x_get_ext_wwn_info(bp, func);
} else if (IS_MF_FCOE_SD(bp))
@@ -11073,7 +11077,14 @@
netdev_for_each_uc_addr(ha, dev) {
rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
BNX2X_UC_LIST_MAC, &ramrod_flags);
- if (rc < 0) {
+ if (rc == -EEXIST) {
+ DP(BNX2X_MSG_SP,
+ "Failed to schedule ADD operations: %d\n", rc);
+ /* do not treat adding same MAC as error */
+ rc = 0;
+
+ } else if (rc < 0) {
+
BNX2X_ERR("Failed to schedule ADD operations: %d\n",
rc);
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index 332db64..a1d0446 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -101,6 +101,11 @@
if (CHIP_REV_IS_SLOW(bp))
return;
+ /* Update MCP's statistics if possible */
+ if (bp->func_stx)
+ memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
+ sizeof(bp->func_stats));
+
/* loader */
if (bp->executer_idx) {
int loader_idx = PMF_DMAE_C(bp);
@@ -128,8 +133,6 @@
} else if (bp->func_stx) {
*stats_comp = 0;
- memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats,
- sizeof(bp->func_stats));
bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
}
}
@@ -1151,9 +1154,11 @@
if (bp->port.pmf)
bnx2x_hw_stats_update(bp);
- if (bnx2x_storm_stats_update(bp) && (bp->stats_pending++ == 3)) {
- BNX2X_ERR("storm stats were not updated for 3 times\n");
- bnx2x_panic();
+ if (bnx2x_storm_stats_update(bp)) {
+ if (bp->stats_pending++ == 3) {
+ BNX2X_ERR("storm stats were not updated for 3 times\n");
+ bnx2x_panic();
+ }
return;
}
diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c
index bd1f1ef..ba4e0ce 100644
--- a/drivers/net/ethernet/i825xx/znet.c
+++ b/drivers/net/ethernet/i825xx/znet.c
@@ -139,8 +139,11 @@
/* Only one can be built-in;-> */
static struct net_device *znet_dev;
+#define NETIDBLK_MAGIC "NETIDBLK"
+#define NETIDBLK_MAGIC_SIZE 8
+
struct netidblk {
- char magic[8]; /* The magic number (string) "NETIDBLK" */
+ char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */
unsigned char netid[8]; /* The physical station address */
char nettype, globalopt;
char vendor[8]; /* The machine vendor and product name. */
@@ -373,14 +376,16 @@
struct znet_private *znet;
struct net_device *dev;
char *p;
+ char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE);
int err = -ENOMEM;
/* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */
- for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++)
- if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0)
+ for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++)
+ if (*p == 'N' &&
+ strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0)
break;
- if (p >= (char *)phys_to_virt(0x100000)) {
+ if (p > plast) {
if (znet_debug > 1)
printk(KERN_INFO "No Z-Note ethernet adaptor found.\n");
return -ENODEV;
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 9010cea..b68d28a 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -472,14 +472,9 @@
}
if (adapter->rx_queue.queue_addr != NULL) {
- if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
- dma_unmap_single(dev,
- adapter->rx_queue.queue_dma,
- adapter->rx_queue.queue_len,
- DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- }
- kfree(adapter->rx_queue.queue_addr);
+ dma_free_coherent(dev, adapter->rx_queue.queue_len,
+ adapter->rx_queue.queue_addr,
+ adapter->rx_queue.queue_dma);
adapter->rx_queue.queue_addr = NULL;
}
@@ -556,10 +551,13 @@
goto err_out;
}
+ dev = &adapter->vdev->dev;
+
adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) *
rxq_entries;
- adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len,
- GFP_KERNEL);
+ adapter->rx_queue.queue_addr =
+ dma_alloc_coherent(dev, adapter->rx_queue.queue_len,
+ &adapter->rx_queue.queue_dma, GFP_KERNEL);
if (!adapter->rx_queue.queue_addr) {
netdev_err(netdev, "unable to allocate rx queue pages\n");
@@ -567,19 +565,13 @@
goto err_out;
}
- dev = &adapter->vdev->dev;
-
adapter->buffer_list_dma = dma_map_single(dev,
adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
adapter->filter_list_dma = dma_map_single(dev,
adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
- adapter->rx_queue.queue_dma = dma_map_single(dev,
- adapter->rx_queue.queue_addr,
- adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
- (dma_mapping_error(dev, adapter->filter_list_dma)) ||
- (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
+ (dma_mapping_error(dev, adapter->filter_list_dma))) {
netdev_err(netdev, "unable to map filter or buffer list "
"pages\n");
rc = -ENOMEM;
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 827b72d..2f816c6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1234,13 +1234,13 @@
mlx4_info(dev, "non-primary physical function, skipping.\n");
else
mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_load_fw(dev);
if (err) {
mlx4_err(dev, "Failed to start FW, aborting.\n");
- goto unmap_bf;
+ return err;
}
mlx4_cfg.log_pg_sz_m = 1;
@@ -1304,7 +1304,7 @@
err = mlx4_init_slave(dev);
if (err) {
mlx4_err(dev, "Failed to initialize slave\n");
- goto unmap_bf;
+ return err;
}
err = mlx4_slave_cap(dev);
@@ -1324,7 +1324,7 @@
err = mlx4_QUERY_ADAPTER(dev, &adapter);
if (err) {
mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n");
- goto err_close;
+ goto unmap_bf;
}
priv->eq_table.inta_pin = adapter.inta_pin;
@@ -1332,6 +1332,9 @@
return 0;
+unmap_bf:
+ unmap_bf_area(dev);
+
err_close:
mlx4_close_hca(dev);
@@ -1344,8 +1347,6 @@
mlx4_UNMAP_FA(dev);
mlx4_free_icm(dev, priv->fw.fw_icm, 0);
}
-unmap_bf:
- unmap_bf_area(dev);
return err;
}
@@ -1996,7 +1997,8 @@
}
slave_start:
- if (mlx4_cmd_init(dev)) {
+ err = mlx4_cmd_init(dev);
+ if (err) {
mlx4_err(dev, "Failed to init command interface, aborting.\n");
goto err_sriov;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index a018ea2..e151c21 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -137,11 +137,11 @@
return err;
}
-static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 pf_num,
+static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 port,
enum mlx4_steer_type steer,
u32 qpn)
{
- struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[pf_num];
+ struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[port - 1];
struct mlx4_promisc_qp *pqp;
list_for_each_entry(pqp, &s_steer->promisc_qps[steer], list) {
@@ -182,7 +182,7 @@
/* If the given qpn is also a promisc qp,
* it should be inserted to duplicates list
*/
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (pqp) {
dqp = kmalloc(sizeof *dqp, GFP_KERNEL);
if (!dqp) {
@@ -256,7 +256,7 @@
s_steer = &mlx4_priv(dev)->steer[port - 1];
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (!pqp)
return 0; /* nothing to do */
@@ -302,7 +302,7 @@
s_steer = &mlx4_priv(dev)->steer[port - 1];
/* if qp is not promisc, it cannot be duplicated */
- if (!get_promisc_qp(dev, 0, steer, qpn))
+ if (!get_promisc_qp(dev, port, steer, qpn))
return false;
/* The qp is promisc qp so it is a duplicate on this index
@@ -352,7 +352,7 @@
members_count = be32_to_cpu(mgm->members_count) & 0xffffff;
for (i = 0; i < members_count; i++) {
qpn = be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK;
- if (!get_promisc_qp(dev, 0, steer, qpn) && qpn != tqpn) {
+ if (!get_promisc_qp(dev, port, steer, qpn) && qpn != tqpn) {
/* the qp is not promisc, the entry can't be removed */
goto out;
}
@@ -398,7 +398,7 @@
mutex_lock(&priv->mcg_table.mutex);
- if (get_promisc_qp(dev, 0, steer, qpn)) {
+ if (get_promisc_qp(dev, port, steer, qpn)) {
err = 0; /* Noting to do, already exists */
goto out_mutex;
}
@@ -503,7 +503,7 @@
s_steer = &mlx4_priv(dev)->steer[port - 1];
mutex_lock(&priv->mcg_table.mutex);
- pqp = get_promisc_qp(dev, 0, steer, qpn);
+ pqp = get_promisc_qp(dev, port, steer, qpn);
if (unlikely(!pqp)) {
mlx4_warn(dev, "QP %x is not promiscuous QP\n", qpn);
/* nothing to do */
@@ -650,13 +650,6 @@
return err;
}
-struct mlx4_net_trans_rule_hw_ctrl {
- __be32 ctrl;
- __be32 vf_vep_port;
- __be32 qpn;
- __be32 reserved;
-};
-
static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl,
struct mlx4_net_trans_rule_hw_ctrl *hw)
{
@@ -680,87 +673,18 @@
hw->qpn = cpu_to_be32(ctrl->qpn);
}
-struct mlx4_net_trans_rule_hw_ib {
- u8 size;
- u8 rsvd1;
- __be16 id;
- u32 rsvd2;
- __be32 qpn;
- __be32 qpn_mask;
- u8 dst_gid[16];
- u8 dst_gid_msk[16];
-} __packed;
-
-struct mlx4_net_trans_rule_hw_eth {
- u8 size;
- u8 rsvd;
- __be16 id;
- u8 rsvd1[6];
- u8 dst_mac[6];
- u16 rsvd2;
- u8 dst_mac_msk[6];
- u16 rsvd3;
- u8 src_mac[6];
- u16 rsvd4;
- u8 src_mac_msk[6];
- u8 rsvd5;
- u8 ether_type_enable;
- __be16 ether_type;
- __be16 vlan_id_msk;
- __be16 vlan_id;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_tcp_udp {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be16 rsvd1[3];
- __be16 dst_port;
- __be16 rsvd2;
- __be16 dst_port_msk;
- __be16 rsvd3;
- __be16 src_port;
- __be16 rsvd4;
- __be16 src_port_msk;
-} __packed;
-
-struct mlx4_net_trans_rule_hw_ipv4 {
- u8 size;
- u8 rsvd;
- __be16 id;
- __be32 rsvd1;
- __be32 dst_ip;
- __be32 dst_ip_msk;
- __be32 src_ip;
- __be32 src_ip_msk;
-} __packed;
-
-struct _rule_hw {
- union {
- struct {
- u8 size;
- u8 rsvd;
- __be16 id;
- };
- struct mlx4_net_trans_rule_hw_eth eth;
- struct mlx4_net_trans_rule_hw_ib ib;
- struct mlx4_net_trans_rule_hw_ipv4 ipv4;
- struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
- };
+const u16 __sw_id_hw[] = {
+ [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
+ [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
+ [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
+ [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
+ [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
+ [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
};
static int parse_trans_rule(struct mlx4_dev *dev, struct mlx4_spec_list *spec,
struct _rule_hw *rule_hw)
{
- static const u16 __sw_id_hw[] = {
- [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001,
- [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005,
- [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003,
- [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002,
- [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004,
- [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006
- };
-
static const size_t __rule_hw_sz[] = {
[MLX4_NET_TRANS_RULE_ID_ETH] =
sizeof(struct mlx4_net_trans_rule_hw_eth),
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 4d9df8f..dba69d9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -690,6 +690,82 @@
struct list_head steer_entries[MLX4_NUM_STEERS];
};
+struct mlx4_net_trans_rule_hw_ctrl {
+ __be32 ctrl;
+ __be32 vf_vep_port;
+ __be32 qpn;
+ __be32 reserved;
+};
+
+struct mlx4_net_trans_rule_hw_ib {
+ u8 size;
+ u8 rsvd1;
+ __be16 id;
+ u32 rsvd2;
+ __be32 qpn;
+ __be32 qpn_mask;
+ u8 dst_gid[16];
+ u8 dst_gid_msk[16];
+} __packed;
+
+struct mlx4_net_trans_rule_hw_eth {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ u8 rsvd1[6];
+ u8 dst_mac[6];
+ u16 rsvd2;
+ u8 dst_mac_msk[6];
+ u16 rsvd3;
+ u8 src_mac[6];
+ u16 rsvd4;
+ u8 src_mac_msk[6];
+ u8 rsvd5;
+ u8 ether_type_enable;
+ __be16 ether_type;
+ __be16 vlan_id_msk;
+ __be16 vlan_id;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_tcp_udp {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be16 rsvd1[3];
+ __be16 dst_port;
+ __be16 rsvd2;
+ __be16 dst_port_msk;
+ __be16 rsvd3;
+ __be16 src_port;
+ __be16 rsvd4;
+ __be16 src_port_msk;
+} __packed;
+
+struct mlx4_net_trans_rule_hw_ipv4 {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ __be32 rsvd1;
+ __be32 dst_ip;
+ __be32 dst_ip_msk;
+ __be32 src_ip;
+ __be32 src_ip_msk;
+} __packed;
+
+struct _rule_hw {
+ union {
+ struct {
+ u8 size;
+ u8 rsvd;
+ __be16 id;
+ };
+ struct mlx4_net_trans_rule_hw_eth eth;
+ struct mlx4_net_trans_rule_hw_ib ib;
+ struct mlx4_net_trans_rule_hw_ipv4 ipv4;
+ struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp;
+ };
+};
+
struct mlx4_priv {
struct mlx4_dev dev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 94ceddd..293c9e8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -42,6 +42,7 @@
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
#include "mlx4.h"
#include "fw.h"
@@ -2776,18 +2777,133 @@
return err;
}
+/*
+ * MAC validation for Flow Steering rules.
+ * VF can attach rules only with a mac address which is assigned to it.
+ */
+static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header,
+ struct list_head *rlist)
+{
+ struct mac_res *res, *tmp;
+ __be64 be_mac;
+
+ /* make sure it isn't multicast or broadcast mac*/
+ if (!is_multicast_ether_addr(eth_header->eth.dst_mac) &&
+ !is_broadcast_ether_addr(eth_header->eth.dst_mac)) {
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ if (!memcmp(&be_mac, eth_header->eth.dst_mac, ETH_ALEN))
+ return 0;
+ }
+ pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n",
+ eth_header->eth.dst_mac, slave);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * In case of missing eth header, append eth header with a MAC address
+ * assigned to the VF.
+ */
+static int add_eth_header(struct mlx4_dev *dev, int slave,
+ struct mlx4_cmd_mailbox *inbox,
+ struct list_head *rlist, int header_id)
+{
+ struct mac_res *res, *tmp;
+ u8 port;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct mlx4_net_trans_rule_hw_eth *eth_header;
+ struct mlx4_net_trans_rule_hw_ipv4 *ip_header;
+ struct mlx4_net_trans_rule_hw_tcp_udp *l4_header;
+ __be64 be_mac = 0;
+ __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16);
+
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ port = be32_to_cpu(ctrl->vf_vep_port) & 0xff;
+ eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1);
+
+ /* Clear a space in the inbox for eth header */
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ ip_header =
+ (struct mlx4_net_trans_rule_hw_ipv4 *)(eth_header + 1);
+ memmove(ip_header, eth_header,
+ sizeof(*ip_header) + sizeof(*l4_header));
+ break;
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ l4_header = (struct mlx4_net_trans_rule_hw_tcp_udp *)
+ (eth_header + 1);
+ memmove(l4_header, eth_header, sizeof(*l4_header));
+ break;
+ default:
+ return -EINVAL;
+ }
+ list_for_each_entry_safe(res, tmp, rlist, list) {
+ if (port == res->port) {
+ be_mac = cpu_to_be64(res->mac << 16);
+ break;
+ }
+ }
+ if (!be_mac) {
+ pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d .\n",
+ port);
+ return -EINVAL;
+ }
+
+ memset(eth_header, 0, sizeof(*eth_header));
+ eth_header->size = sizeof(*eth_header) >> 2;
+ eth_header->id = cpu_to_be16(__sw_id_hw[MLX4_NET_TRANS_RULE_ID_ETH]);
+ memcpy(eth_header->dst_mac, &be_mac, ETH_ALEN);
+ memcpy(eth_header->dst_mac_msk, &mac_msk, ETH_ALEN);
+
+ return 0;
+
+}
+
int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave,
struct mlx4_vhcr *vhcr,
struct mlx4_cmd_mailbox *inbox,
struct mlx4_cmd_mailbox *outbox,
struct mlx4_cmd_info *cmd)
{
+
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker;
+ struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
+ struct mlx4_net_trans_rule_hw_ctrl *ctrl;
+ struct _rule_hw *rule_header;
+ int header_id;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
+ rule_header = (struct _rule_hw *)(ctrl + 1);
+ header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id));
+
+ switch (header_id) {
+ case MLX4_NET_TRANS_RULE_ID_ETH:
+ if (validate_eth_header_mac(slave, rule_header, rlist))
+ return -EINVAL;
+ break;
+ case MLX4_NET_TRANS_RULE_ID_IPV4:
+ case MLX4_NET_TRANS_RULE_ID_TCP:
+ case MLX4_NET_TRANS_RULE_ID_UDP:
+ pr_warn("Can't attach FS rule without L2 headers, adding L2 header.\n");
+ if (add_eth_header(dev, slave, inbox, rlist, header_id))
+ return -EINVAL;
+ vhcr->in_modifier +=
+ sizeof(struct mlx4_net_trans_rule_hw_eth) >> 2;
+ break;
+ default:
+ pr_err("Corrupted mailbox.\n");
+ return -EINVAL;
+ }
+
err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param,
vhcr->in_modifier, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index bb8c822..4d15bf4 100644
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -751,6 +751,7 @@
sp->srings = sr;
sp->rx_desc = sp->srings->rxvector;
sp->tx_desc = sp->srings->txvector;
+ spin_lock_init(&sp->tx_lock);
/* A couple calculations now, saves many cycles later. */
setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index adfab3f..b1ba68f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -297,7 +297,7 @@
if (ret < 0)
goto err;
- if (info->subdriver && info->subdriver->suspend)
+ if (intf == info->control && info->subdriver && info->subdriver->suspend)
ret = info->subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
@@ -310,13 +310,14 @@
struct usbnet *dev = usb_get_intfdata(intf);
struct qmi_wwan_state *info = (void *)&dev->data;
int ret = 0;
+ bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume);
- if (info->subdriver && info->subdriver->resume)
+ if (callsub)
ret = info->subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
- if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend)
+ if (ret < 0 && callsub && info->subdriver->suspend)
info->subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
@@ -398,7 +399,6 @@
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
- {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
@@ -440,6 +440,7 @@
{QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 7be49ea..8e22417 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -656,7 +656,7 @@
return -EIO;
}
- *datap = *attrdata;
+ *datap = le16_to_cpu(*attrdata);
kfree(attrdata);
return result;
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index fd4b26d..fc9f578 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1201,19 +1201,26 @@
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
-static void rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
{
struct urb *urb;
int i;
+ int ret = 0;
/* don't refill the queue all at once */
for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
urb = usb_alloc_urb(0, flags);
if (urb != NULL) {
- if (rx_submit(dev, urb, flags) == -ENOLINK)
- return;
+ ret = rx_submit(dev, urb, flags);
+ if (ret)
+ goto err;
+ } else {
+ ret = -ENOMEM;
+ goto err;
}
}
+err:
+ return ret;
}
/*-------------------------------------------------------------------------*/
@@ -1257,7 +1264,8 @@
int temp = dev->rxq.qlen;
if (temp < RX_QLEN(dev)) {
- rx_alloc_submit(dev, GFP_ATOMIC);
+ if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
+ return;
if (temp != dev->rxq.qlen)
netif_dbg(dev, link, dev->net,
"rxqlen %d --> %d\n",
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index aaaca9a..3f575af 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 2c9f7d7..0ed3846 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -142,6 +142,7 @@
};
int training_power;
int i, val;
+ u32 am2pm_mask = ah->paprd_ratemask;
if (IS_CHAN_2GHZ(ah->curchan))
training_power = ar9003_get_training_power_2g(ah);
@@ -158,10 +159,13 @@
}
ah->paprd_training_power = training_power;
+ if (AR_SREV_9330(ah))
+ am2pm_mask = 0;
+
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK,
ah->paprd_ratemask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK,
- ah->paprd_ratemask);
+ am2pm_mask);
REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK,
ah->paprd_ratemask_ht40);
@@ -782,6 +786,102 @@
}
EXPORT_SYMBOL(ar9003_paprd_setup_gain_table);
+static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah,
+ struct ath9k_hw_cal_data *caldata,
+ int chain)
+{
+ u32 *pa_in = caldata->pa_table[chain];
+ int capdiv_offset, quick_drop_offset;
+ int capdiv2g, quick_drop;
+ int count = 0;
+ int i;
+
+ if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah))
+ return false;
+
+ capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G);
+
+ quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP);
+
+ if (quick_drop)
+ quick_drop -= 0x40;
+
+ for (i = 0; i < NUM_BIN + 1; i++) {
+ if (pa_in[i] == 1400)
+ count++;
+ }
+
+ if (AR_SREV_9485(ah)) {
+ if (pa_in[23] < 800) {
+ capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150);
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 7) {
+ capdiv2g = 7;
+ if (pa_in[23] < 600) {
+ quick_drop++;
+ if (quick_drop > 0)
+ quick_drop = 0;
+ }
+ }
+ } else if (pa_in[23] == 1400) {
+ quick_drop_offset = min_t(int, count / 3, 2);
+ quick_drop += quick_drop_offset;
+ capdiv2g += quick_drop_offset / 2;
+
+ if (capdiv2g > 7)
+ capdiv2g = 7;
+
+ if (quick_drop > 0) {
+ quick_drop = 0;
+ capdiv2g -= quick_drop_offset;
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ }
+ } else {
+ return false;
+ }
+ } else if (AR_SREV_9330(ah)) {
+ if (pa_in[23] < 1000) {
+ capdiv_offset = (1000 - pa_in[23]) / 100;
+ capdiv2g += capdiv_offset;
+ if (capdiv_offset > 3) {
+ capdiv_offset = 1;
+ quick_drop--;
+ }
+
+ capdiv2g += capdiv_offset;
+ if (capdiv2g > 6)
+ capdiv2g = 6;
+ if (quick_drop < -4)
+ quick_drop = -4;
+ } else if (pa_in[23] == 1400) {
+ if (count > 3) {
+ quick_drop++;
+ capdiv2g -= count / 4;
+ if (quick_drop > -2)
+ quick_drop = -2;
+ } else {
+ capdiv2g--;
+ }
+
+ if (capdiv2g < 0)
+ capdiv2g = 0;
+ } else {
+ return false;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+ AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g);
+ REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+ AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+ quick_drop);
+
+ return true;
+}
+
int ar9003_paprd_create_curve(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata, int chain)
{
@@ -817,6 +917,9 @@
if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain))
status = -2;
+ if (ar9003_paprd_retrain_pa_in(ah, caldata, chain))
+ status = -EINPROGRESS;
+
REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1,
AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 7bfbaf0..84d3d49 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -625,6 +625,10 @@
#define AR_PHY_AIC_CTRL_4_B0 (AR_SM_BASE + 0x4c0)
#define AR_PHY_AIC_STAT_2_B0 (AR_SM_BASE + 0x4cc)
+#define AR_PHY_65NM_CH0_TXRF3 0x16048
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G 0x0000001e
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S 1
+
#define AR_PHY_65NM_CH0_SYNTH4 0x1608c
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002)
#define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index bacdb8f..9f83f71 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -341,7 +341,8 @@
{
struct ath_btcoex *btcoex = &sc->btcoex;
- ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+ if (btcoex->hw_timer_enabled)
+ ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
}
u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 60b6a9d..48af401 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -463,9 +463,6 @@
ah->config.spurchans[i][1] = AR_NO_SPUR;
}
- /* PAPRD needs some more work to be enabled */
- ah->config.paprd_disable = 1;
-
ah->config.rx_intr_mitigation = true;
ah->config.pcieSerDesWrite = true;
@@ -978,9 +975,6 @@
else
imr_reg |= AR_IMR_TXOK;
- if (opmode == NL80211_IFTYPE_AP)
- imr_reg |= AR_IMR_MIB;
-
ENABLE_REGWRITE_BUFFER(ah);
REG_WRITE(ah, AR_IMR, imr_reg);
@@ -1778,6 +1772,8 @@
/* Operating channel changed, reset channel calibration data */
memset(caldata, 0, sizeof(*caldata));
ath9k_init_nfcal_hist_buffer(ah, chan);
+ } else if (caldata) {
+ caldata->paprd_packet_sent = false;
}
ah->noise = ath9k_hw_getchan_noise(ah, chan);
@@ -2502,7 +2498,8 @@
pCap->tx_desc_len = sizeof(struct ar9003_txc);
pCap->txs_len = sizeof(struct ar9003_txs);
if (!ah->config.paprd_disable &&
- ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
+ ah->eep_ops->get_eeprom(ah, EEP_PAPRD) &&
+ !AR_SREV_9462(ah))
pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
} else {
pCap->tx_desc_len = sizeof(struct ath_desc);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ce7332c..6599a75 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -405,6 +405,7 @@
int8_t iCoff;
int8_t qCoff;
bool rtt_done;
+ bool paprd_packet_sent;
bool paprd_done;
bool nfcal_pending;
bool nfcal_interference;
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index d4549e9..825a29c 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -254,8 +254,9 @@
int chain_ok = 0;
int chain;
int len = 1800;
+ int ret;
- if (!caldata)
+ if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done)
return;
ath9k_ps_wakeup(sc);
@@ -282,13 +283,6 @@
continue;
chain_ok = 0;
-
- ath_dbg(common, CALIBRATE,
- "Sending PAPRD frame for thermal measurement on chain %d\n",
- chain);
- if (!ath_paprd_send_frame(sc, skb, chain))
- goto fail_paprd;
-
ar9003_paprd_setup_gain_table(ah, chain);
ath_dbg(common, CALIBRATE,
@@ -302,7 +296,13 @@
break;
}
- if (ar9003_paprd_create_curve(ah, caldata, chain)) {
+ ret = ar9003_paprd_create_curve(ah, caldata, chain);
+ if (ret == -EINPROGRESS) {
+ ath_dbg(common, CALIBRATE,
+ "PAPRD curve on chain %d needs to be re-trained\n",
+ chain);
+ break;
+ } else if (ret) {
ath_dbg(common, CALIBRATE,
"PAPRD create curve failed on chain %d\n",
chain);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 2c9da6b..0d4155a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2018,6 +2018,9 @@
ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
+ if (sc->sc_ah->caldata)
+ sc->sc_ah->caldata->paprd_packet_sent = true;
+
if (!(tx_flags & ATH_TX_ERROR))
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index a299d42..58f89fa 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -519,7 +519,7 @@
else
devinfo->bus_pub.bus->dstats.tx_errors++;
- dev_kfree_skb(req->skb);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
@@ -540,7 +540,7 @@
devinfo->bus_pub.bus->dstats.rx_packets++;
} else {
devinfo->bus_pub.bus->dstats.rx_errors++;
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
return;
}
@@ -550,13 +550,15 @@
if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
brcmf_dbg(ERROR, "rx protocol error\n");
brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
devinfo->bus_pub.bus->dstats.rx_errors++;
} else {
brcmf_rx_packet(devinfo->dev, ifidx, skb);
brcmf_usb_rx_refill(devinfo, req);
}
} else {
- dev_kfree_skb(skb);
+ brcmu_pkt_buf_free_skb(skb);
+ brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
return;
@@ -581,14 +583,13 @@
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
req);
- req->urb->transfer_flags |= URB_ZERO_PACKET;
req->devinfo = devinfo;
+ brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (ret == 0) {
- brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
- } else {
- dev_kfree_skb(req->skb);
+ if (ret) {
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
}
@@ -683,23 +684,22 @@
req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq);
if (!req) {
+ brcmu_pkt_buf_free_skb(skb);
brcmf_dbg(ERROR, "no req to send\n");
return -ENOMEM;
}
- if (!req->urb) {
- brcmf_dbg(ERROR, "no urb for req %p\n", req);
- return -ENOBUFS;
- }
req->skb = skb;
req->devinfo = devinfo;
usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
skb->data, skb->len, brcmf_usb_tx_complete, req);
req->urb->transfer_flags |= URB_ZERO_PACKET;
+ brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
ret = usb_submit_urb(req->urb, GFP_ATOMIC);
- if (!ret) {
- brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
- } else {
+ if (ret) {
+ brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n");
+ brcmf_usb_del_fromq(devinfo, req);
+ brcmu_pkt_buf_free_skb(req->skb);
req->skb = NULL;
brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 28c5fbb..c36e923 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1876,16 +1876,17 @@
}
if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) {
- scb_val.val = cpu_to_le32(0);
+ memset(&scb_val, 0, sizeof(scb_val));
err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val,
sizeof(struct brcmf_scb_val_le));
- if (err)
+ if (err) {
WL_ERR("Could not get rssi (%d)\n", err);
-
- rssi = le32_to_cpu(scb_val.val);
- sinfo->filled |= STATION_INFO_SIGNAL;
- sinfo->signal = rssi;
- WL_CONN("RSSI %d dBm\n", rssi);
+ } else {
+ rssi = le32_to_cpu(scb_val.val);
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = rssi;
+ WL_CONN("RSSI %d dBm\n", rssi);
+ }
}
done:
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index e970897..4cb2343 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1326,6 +1326,11 @@
mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
+ /* If we're powered off anyway, just let the mmc layer remove the
+ * card. */
+ if (!lbs_iface_active(card->priv))
+ return -ENOSYS;
+
dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
sdio_func_id(func), flags);
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index c68adec..565527a 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -170,7 +170,20 @@
cmd_code = le16_to_cpu(host_cmd->command);
cmd_size = le16_to_cpu(host_cmd->size);
- skb_trim(cmd_node->cmd_skb, cmd_size);
+ /* Adjust skb length */
+ if (cmd_node->cmd_skb->len > cmd_size)
+ /*
+ * cmd_size is less than sizeof(struct host_cmd_ds_command).
+ * Trim off the unused portion.
+ */
+ skb_trim(cmd_node->cmd_skb, cmd_size);
+ else if (cmd_node->cmd_skb->len < cmd_size)
+ /*
+ * cmd_size is larger than sizeof(struct host_cmd_ds_command)
+ * because we have appended custom IE TLV. Increase skb length
+ * accordingly.
+ */
+ skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len);
do_gettimeofday(&tstamp);
dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 8b9dbd7..64328af 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1611,6 +1611,7 @@
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
@@ -1624,6 +1625,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_BIT8, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt2400pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index d3a4a68..7564ae9 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -670,6 +670,7 @@
#define GPIOCSR_BIT5 FIELD32(0x00000020)
#define GPIOCSR_BIT6 FIELD32(0x00000040)
#define GPIOCSR_BIT7 FIELD32(0x00000080)
+#define GPIOCSR_BIT8 FIELD32(0x00000100)
/*
* BBPPCSR: BBP Pin control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d2cf8a4..3de0406 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1929,6 +1929,7 @@
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
@@ -1942,6 +1943,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
+ rt2x00_set_field32(®, GPIOCSR_DIR0, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt2500pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3aae36b..89fee31 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -283,7 +283,7 @@
u16 reg;
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
- return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+ return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -1768,6 +1768,7 @@
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u16 reg;
/*
* Allocate eeprom data.
@@ -1781,6 +1782,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
+ rt2x00_set_field16(®, MAC_CSR19_BIT8, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt2500usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b493306..196bd51 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -189,14 +189,15 @@
* MAC_CSR19: GPIO control register.
*/
#define MAC_CSR19 0x0426
-#define MAC_CSR19_BIT0 FIELD32(0x0001)
-#define MAC_CSR19_BIT1 FIELD32(0x0002)
-#define MAC_CSR19_BIT2 FIELD32(0x0004)
-#define MAC_CSR19_BIT3 FIELD32(0x0008)
-#define MAC_CSR19_BIT4 FIELD32(0x0010)
-#define MAC_CSR19_BIT5 FIELD32(0x0020)
-#define MAC_CSR19_BIT6 FIELD32(0x0040)
-#define MAC_CSR19_BIT7 FIELD32(0x0080)
+#define MAC_CSR19_BIT0 FIELD16(0x0001)
+#define MAC_CSR19_BIT1 FIELD16(0x0002)
+#define MAC_CSR19_BIT2 FIELD16(0x0004)
+#define MAC_CSR19_BIT3 FIELD16(0x0008)
+#define MAC_CSR19_BIT4 FIELD16(0x0010)
+#define MAC_CSR19_BIT5 FIELD16(0x0020)
+#define MAC_CSR19_BIT6 FIELD16(0x0040)
+#define MAC_CSR19_BIT7 FIELD16(0x0080)
+#define MAC_CSR19_BIT8 FIELD16(0x0100)
/*
* MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index cb8c2ac..b93516d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4089,6 +4089,7 @@
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
msleep(1);
rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0);
rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1);
rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 98aa426..4765bbd 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -983,6 +983,7 @@
static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
@@ -996,6 +997,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt2800_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6cf3365..6b4226b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -667,8 +667,16 @@
skb_pull(entry->skb, RXINFO_DESC_SIZE);
/*
- * FIXME: we need to check for rx_pkt_len validity
+ * Check for rx_pkt_len validity. Return if invalid, leaving
+ * rxdesc->size zeroed out by the upper level.
*/
+ if (unlikely(rx_pkt_len == 0 ||
+ rx_pkt_len > entry->queue->data_size)) {
+ ERROR(entry->queue->rt2x00dev,
+ "Bad frame size %d, forcing to 0\n", rx_pkt_len);
+ return;
+ }
+
rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
/*
@@ -736,6 +744,7 @@
static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
@@ -749,6 +758,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
+ rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+ rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt2800_probe_hw_mode(rt2x00dev);
@@ -1157,6 +1174,8 @@
{ USB_DEVICE(0x1690, 0x0744) },
{ USB_DEVICE(0x1690, 0x0761) },
{ USB_DEVICE(0x1690, 0x0764) },
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x179d) },
/* Cisco */
{ USB_DEVICE(0x167b, 0x4001) },
/* EnGenius */
@@ -1222,7 +1241,6 @@
{ USB_DEVICE(0x0b05, 0x1760) },
{ USB_DEVICE(0x0b05, 0x1761) },
{ USB_DEVICE(0x0b05, 0x1790) },
- { USB_DEVICE(0x0b05, 0x179d) },
/* AzureWave */
{ USB_DEVICE(0x13d3, 0x3262) },
{ USB_DEVICE(0x13d3, 0x3284) },
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index a6b88bd..3f07e36 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -629,7 +629,7 @@
*/
if (unlikely(rxdesc.size == 0 ||
rxdesc.size > entry->queue->data_size)) {
- WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+ ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
rxdesc.size, entry->queue->data_size);
dev_kfree_skb(entry->skb);
goto renew_skb;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3f7bc5c..b8ec961 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2832,6 +2832,7 @@
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Disable power saving.
@@ -2850,6 +2851,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT13, 1);
+ rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt61pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db..8f3da5a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -372,6 +372,7 @@
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
/*
* MAC_CSR14: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ba6e434..248436c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2177,6 +2177,7 @@
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
+ u32 reg;
/*
* Allocate eeprom data.
@@ -2190,6 +2191,14 @@
return retval;
/*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
+ rt2x00_set_field32(®, MAC_CSR13_BIT15, 0);
+ rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
+ /*
* Initialize hw specifications.
*/
retval = rt73usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 9f6b470..df1cc11 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -282,6 +282,9 @@
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13 FIELD32(0x00002000)
+#define MAC_CSR13_BIT14 FIELD32(0x00004000)
+#define MAC_CSR13_BIT15 FIELD32(0x00008000)
/*
* MAC_CSR14: LED control register.
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 0ad06a3..fa74efe 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -24,7 +24,7 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index cc0f00d..b446c96 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -1,11 +1,8 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2011 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
- * This can driver either of the two basic GPIO cores
- * available in the U300 platforms:
- * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
* Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
@@ -24,19 +21,22 @@
#include <linux/slab.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h>
-#include <mach/gpio-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
#include "pinctrl-coh901.h"
+#define U300_GPIO_PORT_STRIDE (0x30)
/*
- * Register definitions for COH 901 335 variant
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
*/
-#define U300_335_PORT_STRIDE (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_335_PXPDIR (0x00)
-#define U300_335_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_335_PXPCR (0x04)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_CR (0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+#define U300_GPIO_PXPDIR (0x04)
+#define U300_GPIO_PXPDOR (0x08)
+#define U300_GPIO_PXPCR (0x0C)
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
@@ -44,53 +44,17 @@
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_335_PXIEV (0x08)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_335_PXIEN (0x0C)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_335_PXIFR (0x10)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_335_PXICR (0x14)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER (0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+#define U300_GPIO_PXIEV (0x14)
+#define U300_GPIO_PXIEN (0x18)
+#define U300_GPIO_PXIFR (0x1C)
+#define U300_GPIO_PXICR (0x20)
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_335_PXPER (0x18)
-/* This register layout is the same in both blocks */
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_335_CR (0x54)
-#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-
-/*
- * Register definitions for COH 901 571 / 3 variant
- */
-#define U300_571_PORT_STRIDE (0x30)
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_571_CR (0x00)
-#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-/*
- * These registers have the same layout and function as the corresponding
- * COH 901 335 registers, just at different offset.
- */
-#define U300_571_PXPDIR (0x04)
-#define U300_571_PXPDOR (0x08)
-#define U300_571_PXPCR (0x0C)
-#define U300_571_PXPER (0x10)
-#define U300_571_PXIEV (0x14)
-#define U300_571_PXIEN (0x18)
-#define U300_571_PXIFR (0x1C)
-#define U300_571_PXICR (0x20)
/* 8 bits per port, no version has more than 7 ports */
#define U300_GPIO_PINS_PER_PORT 8
@@ -149,8 +113,6 @@
/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
#define BS335_GPIO_NUM_PORTS 7
-/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
-#define BS365_GPIO_NUM_PORTS 5
#define U300_FLOATING_INPUT { \
.bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \
@@ -172,7 +134,6 @@
.outval = 1, \
}
-
/* Initial configuration */
static const struct __initconst u300_gpio_confdata
bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
@@ -255,66 +216,6 @@
}
};
-static const struct __initconst u300_gpio_confdata
-bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
- /* Port 0, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_FLOATING_INPUT,
- },
- /* Port 1, pins 0-7 */
- {
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_FLOATING_INPUT,
- U300_OUTPUT_HIGH,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- },
- /* Port 2, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_PULL_UP_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 3, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 4, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- /* These 4 pins doesn't exist on DB3210 */
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- }
-};
-
/**
* to_u300_gpio() - get the pointer to u300_gpio
* @chip: the gpio chip member of the structure u300_gpio
@@ -716,13 +617,7 @@
const struct u300_gpio_confdata *conf;
int offset = (i*8) + j;
- if (plat->variant == U300_GPIO_COH901571_3_BS335)
- conf = &bs335_gpio_config[i][j];
- else if (plat->variant == U300_GPIO_COH901571_3_BS365)
- conf = &bs365_gpio_config[i][j];
- else
- break;
-
+ conf = &bs335_gpio_config[i][j];
u300_gpio_init_pin(gpio, offset, conf);
}
}
@@ -796,50 +691,27 @@
goto err_no_ioremap;
}
- if (plat->variant == U300_GPIO_COH901335) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 335\n");
- gpio->stride = U300_335_PORT_STRIDE;
- gpio->pcr = U300_335_PXPCR;
- gpio->dor = U300_335_PXPDOR;
- gpio->dir = U300_335_PXPDIR;
- gpio->per = U300_335_PXPER;
- gpio->icr = U300_335_PXICR;
- gpio->ien = U300_335_PXIEN;
- gpio->iev = U300_335_PXIEV;
- ifr = U300_335_PXIFR;
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_GPIO_PORT_STRIDE;
+ gpio->pcr = U300_GPIO_PXPCR;
+ gpio->dor = U300_GPIO_PXPDOR;
+ gpio->dir = U300_GPIO_PXPDIR;
+ gpio->per = U300_GPIO_PXPER;
+ gpio->icr = U300_GPIO_PXICR;
+ gpio->ien = U300_GPIO_PXIEN;
+ gpio->iev = U300_GPIO_PXIEV;
+ ifr = U300_GPIO_PXIFR;
- /* Turn on the GPIO block */
- writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
- gpio->base + U300_335_CR);
- } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 571/3\n");
- gpio->stride = U300_571_PORT_STRIDE;
- gpio->pcr = U300_571_PXPCR;
- gpio->dor = U300_571_PXPDOR;
- gpio->dir = U300_571_PXPDIR;
- gpio->per = U300_571_PXPER;
- gpio->icr = U300_571_PXICR;
- gpio->ien = U300_571_PXIEN;
- gpio->iev = U300_571_PXIEV;
- ifr = U300_571_PXIFR;
-
- val = readl(gpio->base + U300_571_CR);
- dev_info(gpio->dev, "COH901571/3 block version: %d, " \
- "number of cores: %d totalling %d pins\n",
- ((val & 0x000001FC) >> 2),
- ((val & 0x0000FE00) >> 9),
- ((val & 0x0000FE00) >> 9) * 8);
- writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
- gpio->base + U300_571_CR);
- u300_gpio_init_coh901571(gpio, plat);
- } else {
- dev_err(gpio->dev, "unknown block variant\n");
- err = -ENODEV;
- goto err_unknown_variant;
- }
+ val = readl(gpio->base + U300_GPIO_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_GPIO_CR);
+ u300_gpio_init_coh901571(gpio, plat);
/* Add each port with its IRQ separately */
INIT_LIST_HEAD(&gpio->port_list);
@@ -906,7 +778,6 @@
err_no_chip:
err_no_port:
u300_gpio_free_ports(gpio);
-err_unknown_variant:
iounmap(gpio->base);
err_no_ioremap:
release_mem_region(gpio->memres->start, resource_size(gpio->memres));
@@ -923,16 +794,11 @@
static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
struct u300_gpio *gpio = platform_get_drvdata(pdev);
int err;
/* Turn off the GPIO block */
- if (plat->variant == U300_GPIO_COH901335)
- writel(0x00000000U, gpio->base + U300_335_CR);
- if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365)
- writel(0x00000000U, gpio->base + U300_571_CR);
+ writel(0x00000000U, gpio->base + U300_GPIO_CR);
err = gpiochip_remove(&gpio->chip);
if (err < 0) {
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index 7fca6ce..304360c 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -17,6 +17,7 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
@@ -916,11 +917,66 @@
seq_printf(s, " " DRIVER_NAME);
}
+static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map, unsigned *num_maps)
+{
+ struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev);
+ struct device_node *np;
+ struct property *prop;
+ const char *function, *group;
+ int ret, index = 0, count = 0;
+
+ /* calculate number of maps required */
+ for_each_child_of_node(np_config, np) {
+ ret = of_property_read_string(np, "sirf,function", &function);
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_count_strings(np, "sirf,pins");
+ if (ret < 0)
+ return ret;
+
+ count += ret;
+ }
+
+ if (!count) {
+ dev_err(spmx->dev, "No child nodes passed via DT\n");
+ return -ENODEV;
+ }
+
+ *map = kzalloc(sizeof(**map) * count, GFP_KERNEL);
+ if (!*map)
+ return -ENOMEM;
+
+ for_each_child_of_node(np_config, np) {
+ of_property_read_string(np, "sirf,function", &function);
+ of_property_for_each_string(np, "sirf,pins", prop, group) {
+ (*map)[index].type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)[index].data.mux.group = group;
+ (*map)[index].data.mux.function = function;
+ index++;
+ }
+ }
+
+ *num_maps = count;
+
+ return 0;
+}
+
+static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ kfree(map);
+}
+
static struct pinctrl_ops sirfsoc_pctrl_ops = {
.get_groups_count = sirfsoc_get_groups_count,
.get_group_name = sirfsoc_get_group_name,
.get_group_pins = sirfsoc_get_group_pins,
.pin_dbg_show = sirfsoc_pin_dbg_show,
+ .dt_node_to_map = sirfsoc_dt_node_to_map,
+ .dt_free_map = sirfsoc_dt_free_map,
};
struct sirfsoc_pmx_func {
@@ -1221,7 +1277,7 @@
}
static const struct of_device_id pinmux_ids[] __devinitconst = {
- { .compatible = "sirf,prima2-gpio-pinmux" },
+ { .compatible = "sirf,prima2-pinctrl" },
{}
};
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 3782e1c..934d861 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -2196,10 +2196,8 @@
interface->capability &= ~ACER_CAP_BRIGHTNESS;
pr_info("Brightness must be controlled by acpi video driver\n");
} else {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
}
if (wmi_has_guid(WMID_GUID3)) {
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index dfb1a92..db8f638 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -101,7 +101,7 @@
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
- outb(tmpval, port + i);
+ outb(tmpval, gmux_data->iostart + port + i);
}
}
@@ -142,8 +142,9 @@
u8 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inb(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
@@ -166,8 +167,9 @@
u32 val;
mutex_lock(&gmux_data->index_lock);
- outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_ready(gmux_data);
+ outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
+ gmux_index_wait_complete(gmux_data);
val = inl(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
@@ -461,18 +463,22 @@
ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE);
if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) {
if (gmux_is_indexed(gmux_data)) {
+ u32 version;
mutex_init(&gmux_data->index_lock);
gmux_data->indexed = true;
+ version = gmux_read32(gmux_data,
+ GMUX_PORT_VERSION_MAJOR);
+ ver_major = (version >> 24) & 0xff;
+ ver_minor = (version >> 16) & 0xff;
+ ver_release = (version >> 8) & 0xff;
} else {
pr_info("gmux device not present\n");
ret = -ENODEV;
goto err_release;
}
- pr_info("Found indexed gmux\n");
- } else {
- pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor,
- ver_release);
}
+ pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
+ ver_release, (gmux_data->indexed ? "indexed" : "classic"));
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
@@ -505,9 +511,7 @@
* Disable the other backlight choices.
*/
acpi_video_dmi_promote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_unregister();
-#endif
apple_bl_unregister();
gmux_data->power_state = VGA_SWITCHEROO_ON;
@@ -593,9 +597,7 @@
kfree(gmux_data);
acpi_video_dmi_demote_vendor();
-#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE)
acpi_video_register();
-#endif
apple_bl_register();
}
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index e38f91b..4b568df 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -85,7 +85,7 @@
static char *bled_type = "unknown";
module_param(wled_type, charp, 0444);
-MODULE_PARM_DESC(wlan_status, "Set the wled type on boot "
+MODULE_PARM_DESC(wled_type, "Set the wled type on boot "
"(unknown, led or rfkill). "
"default is unknown");
@@ -863,9 +863,9 @@
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp);
+ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "HRWS value : %#x\n",
+ len += sprintf(page + len, "HWRS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
@@ -1751,9 +1751,9 @@
* The significance of others is yet to be found.
*/
status =
- acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result);
+ acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
if (!ACPI_FAILURE(status))
- pr_notice(" HRWS returned %x", (int)hwrs_result);
+ pr_notice(" HWRS returned %x", (int)hwrs_result);
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 2eb9fe8..c0e9ff4 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -47,9 +47,7 @@
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
#include "asus-wmi.h"
@@ -1704,10 +1702,8 @@
if (asus->driver->quirks->wmi_backlight_power)
acpi_video_dmi_promote_vendor();
if (!acpi_video_backlight_support()) {
-#ifdef CONFIG_ACPI_VIDEO
pr_info("Disabling ACPI video driver\n");
acpi_video_unregister();
-#endif
err = asus_wmi_backlight_init(asus);
if (err && err != -ENODEV)
goto fail_backlight;
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index dab91b4..5ca2641 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -610,12 +610,12 @@
if (!bus) {
pr_warn("Unable to find PCI bus 1?\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
pr_err("Unable to read PCI config space?\n");
- goto out_unlock;
+ goto out_put_dev;
}
absent = (l == 0xffffffff);
@@ -627,7 +627,7 @@
absent ? "absent" : "present");
pr_warn("skipped wireless hotplug as probably "
"inappropriate for this model\n");
- goto out_unlock;
+ goto out_put_dev;
}
if (!blocked) {
@@ -635,7 +635,7 @@
if (dev) {
/* Device already present */
pci_dev_put(dev);
- goto out_unlock;
+ goto out_put_dev;
}
dev = pci_scan_single_device(bus, 0);
if (dev) {
@@ -650,6 +650,8 @@
pci_dev_put(dev);
}
}
+out_put_dev:
+ pci_dev_put(port);
}
out_unlock:
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index c1ca7bc..dd90d15 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -26,9 +26,7 @@
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/ctype.h>
-#ifdef CONFIG_ACPI_VIDEO
#include <acpi/video.h>
-#endif
/*
* This driver is needed because a number of Samsung laptops do not hook
@@ -1558,9 +1556,7 @@
samsung->handle_backlight = false;
} else if (samsung->quirks->broken_acpi_video) {
pr_info("Disabling ACPI video driver\n");
-#ifdef CONFIG_ACPI_VIDEO
acpi_video_unregister();
-#endif
}
#endif
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 80e3779..52daaa8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -545,7 +545,7 @@
*/
static int acpi_evalf(acpi_handle handle,
- void *res, char *method, char *fmt, ...)
+ int *res, char *method, char *fmt, ...)
{
char *fmt0 = fmt;
struct acpi_object_list params;
@@ -606,7 +606,7 @@
success = (status == AE_OK &&
out_obj.type == ACPI_TYPE_INTEGER);
if (success && res)
- *(int *)res = out_obj.integer.value;
+ *res = out_obj.integer.value;
break;
case 'v': /* void */
success = status == AE_OK;
@@ -7386,17 +7386,18 @@
* Add TPACPI_FAN_RD_ACPI_FANS ? */
switch (fan_status_access_mode) {
- case TPACPI_FAN_RD_ACPI_GFAN:
+ case TPACPI_FAN_RD_ACPI_GFAN: {
/* 570, 600e/x, 770e, 770x */
+ int res;
- if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ if (unlikely(!acpi_evalf(gfan_handle, &res, NULL, "d")))
return -EIO;
if (likely(status))
- *status = s & 0x07;
+ *status = res & 0x07;
break;
-
+ }
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 0b66d0f..4b66889 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -100,6 +100,13 @@
writel(period_cycles, pc->mmio_base + CAP3);
}
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ reg_val = readw(pc->mmio_base + ECCTL2);
+ /* Disable APWM mode to put APWM output Low */
+ reg_val &= ~ECCTL2_APWM_MODE;
+ writew(reg_val, pc->mmio_base + ECCTL2);
+ }
+
pm_runtime_put_sync(pc->chip.dev);
return 0;
}
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index c3756d1..b1996bc 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -104,6 +104,7 @@
struct pwm_chip chip;
unsigned int clk_rate;
void __iomem *mmio_base;
+ unsigned long period_cycles[NUM_PWM_CHANNEL];
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -210,6 +211,7 @@
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned short ps_divval, tb_divval;
+ int i;
if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
return -ERANGE;
@@ -229,6 +231,28 @@
duty_cycles = (unsigned long)c;
}
+ /*
+ * Period values should be same for multiple PWM channels as IP uses
+ * same period register for multiple channels.
+ */
+ for (i = 0; i < NUM_PWM_CHANNEL; i++) {
+ if (pc->period_cycles[i] &&
+ (pc->period_cycles[i] != period_cycles)) {
+ /*
+ * Allow channel to reconfigure period if no other
+ * channels being configured.
+ */
+ if (i == pwm->hwpwm)
+ continue;
+
+ dev_err(chip->dev, "Period value conflicts with channel %d\n",
+ i);
+ return -EINVAL;
+ }
+ }
+
+ pc->period_cycles[pwm->hwpwm] = period_cycles;
+
/* Configure clock prescaler to support Low frequency PWM wave */
if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
&tb_divval)) {
@@ -320,10 +344,15 @@
static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
+
+ /* set period value to zero on free */
+ pc->period_cycles[pwm->hwpwm] = 0;
}
static const struct pwm_ops ehrpwm_pwm_ops = {
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index 6caa222..ab00cab 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps65217.h>
@@ -281,37 +282,130 @@
NULL),
};
+#ifdef CONFIG_OF
+static struct of_regulator_match reg_matches[] = {
+ { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
+ { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
+ { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
+ { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
+ { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
+ { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
+ { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
+};
+
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *node = tps->dev->of_node;
+ struct tps65217_board *pdata;
+ struct device_node *regs;
+ int i, count;
+
+ regs = of_find_node_by_name(node, "regulators");
+ if (!regs)
+ return NULL;
+
+ count = of_regulator_match(pdev->dev.parent, regs,
+ reg_matches, TPS65217_NUM_REGULATOR);
+ of_node_put(regs);
+ if ((count < 0) || (count > TPS65217_NUM_REGULATOR))
+ return NULL;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ for (i = 0; i < count; i++) {
+ if (!reg_matches[i].init_data || !reg_matches[i].of_node)
+ continue;
+
+ pdata->tps65217_init_data[i] = reg_matches[i].init_data;
+ pdata->of_node[i] = reg_matches[i].of_node;
+ }
+
+ return pdata;
+}
+#else
+static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit tps65217_regulator_probe(struct platform_device *pdev)
{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct tps65217_board *pdata = dev_get_platdata(tps->dev);
+ struct regulator_init_data *reg_data;
struct regulator_dev *rdev;
- struct tps65217 *tps;
- struct tps_info *info = &tps65217_pmic_regs[pdev->id];
struct regulator_config config = { };
+ int i, ret;
- /* Already set by core driver */
- tps = dev_to_tps65217(pdev->dev.parent);
- tps->info[pdev->id] = info;
+ if (tps->dev->of_node)
+ pdata = tps65217_parse_dt(pdev);
- config.dev = &pdev->dev;
- config.of_node = pdev->dev.of_node;
- config.init_data = pdev->dev.platform_data;
- config.driver_data = tps;
+ if (!pdata) {
+ dev_err(&pdev->dev, "Platform data not found\n");
+ return -EINVAL;
+ }
- rdev = regulator_register(®ulators[pdev->id], &config);
- if (IS_ERR(rdev))
- return PTR_ERR(rdev);
+ if (tps65217_chip_id(tps) != TPS65217) {
+ dev_err(&pdev->dev, "Invalid tps chip version\n");
+ return -ENODEV;
+ }
- platform_set_drvdata(pdev, rdev);
+ platform_set_drvdata(pdev, tps);
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
+
+ reg_data = pdata->tps65217_init_data[i];
+
+ /*
+ * Regulator API handles empty constraints but not NULL
+ * constraints
+ */
+ if (!reg_data)
+ continue;
+
+ /* Register the regulators */
+ tps->info[i] = &tps65217_pmic_regs[i];
+
+ config.dev = tps->dev;
+ config.init_data = reg_data;
+ config.driver_data = tps;
+ config.regmap = tps->regmap;
+ if (tps->dev->of_node)
+ config.of_node = pdata->of_node[i];
+
+ rdev = regulator_register(®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(tps->dev, "failed to register %s regulator\n",
+ pdev->name);
+ ret = PTR_ERR(rdev);
+ goto err_unregister_regulator;
+ }
+
+ /* Save regulator for cleanup */
+ tps->rdev[i] = rdev;
+ }
return 0;
+
+err_unregister_regulator:
+ while (--i >= 0)
+ regulator_unregister(tps->rdev[i]);
+
+ return ret;
}
static int __devexit tps65217_regulator_remove(struct platform_device *pdev)
{
- struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ struct tps65217 *tps = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < TPS65217_NUM_REGULATOR; i++)
+ regulator_unregister(tps->rdev[i]);
platform_set_drvdata(pdev, NULL);
- regulator_unregister(rdev);
return 0;
}
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 19241fc..8212526 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -162,6 +162,9 @@
.disable = tps6586x_regulator_disable,
};
+static struct regulator_ops tps6586x_sys_regulator_ops = {
+};
+
static const unsigned int tps6586x_ldo0_voltages[] = {
1200000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
};
@@ -230,15 +233,28 @@
TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
}
+#define TPS6586X_SYS_REGULATOR() \
+{ \
+ .desc = { \
+ .supply_name = "sys", \
+ .name = "REG-SYS", \
+ .ops = &tps6586x_sys_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = TPS6586X_ID_SYS, \
+ .owner = THIS_MODULE, \
+ }, \
+}
+
static struct tps6586x_regulator tps6586x_regulator[] = {
+ TPS6586X_SYS_REGULATOR(),
TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
- TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
+ TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
+ TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index a1f7ac1..b54504e 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -29,7 +29,7 @@
#include <linux/remoteproc.h>
#include <plat/mailbox.h>
-#include <plat/remoteproc.h>
+#include <linux/platform_data/remoteproc-omap.h>
#include "omap_remoteproc.h"
#include "remoteproc_internal.h"
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index 0075c8f..f771b2e 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -27,6 +27,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <mach/hardware.h>
@@ -396,6 +398,14 @@
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id pxa_rtc_dt_ids[] = {
+ { .compatible = "marvell,pxa-rtc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pxa_rtc_dt_ids);
+#endif
+
#ifdef CONFIG_PM
static int pxa_rtc_suspend(struct device *dev)
{
@@ -425,6 +435,7 @@
.remove = __exit_p(pxa_rtc_remove),
.driver = {
.name = "pxa-rtc",
+ .of_match_table = of_match_ptr(pxa_rtc_dt_ids),
#ifdef CONFIG_PM
.pm = &pxa_rtc_pm_ops,
#endif
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index dc27598..ed38454 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4066,7 +4066,6 @@
spin_lock_init(&instance->cmd_pool_lock);
spin_lock_init(&instance->hba_lock);
spin_lock_init(&instance->completion_lock);
- spin_lock_init(&poll_aen_lock);
mutex_init(&instance->aen_mutex);
mutex_init(&instance->reset_mutex);
@@ -5392,6 +5391,8 @@
printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
MEGASAS_EXT_VERSION);
+ spin_lock_init(&poll_aen_lock);
+
support_poll_for_event = 2;
support_device_change = 1;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 9d46fcb..b25757d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2424,10 +2424,13 @@
}
/* command line tunables for max controller queue depth */
- if (max_queue_depth != -1)
- max_request_credit = (max_queue_depth < facts->RequestCredit)
- ? max_queue_depth : facts->RequestCredit;
- else
+ if (max_queue_depth != -1 && max_queue_depth != 0) {
+ max_request_credit = min_t(u16, max_queue_depth +
+ ioc->hi_priority_depth + ioc->internal_depth,
+ facts->RequestCredit);
+ if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+ max_request_credit = MAX_HBA_QUEUE_DEPTH;
+ } else
max_request_credit = min_t(u16, facts->RequestCredit,
MAX_HBA_QUEUE_DEPTH);
@@ -2502,7 +2505,7 @@
/* set the scsi host can_queue depth
* with some internal commands that could be outstanding
*/
- ioc->shost->can_queue = ioc->scsiio_depth - (2);
+ ioc->shost->can_queue = ioc->scsiio_depth;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
"can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 4a6381c..de2337f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -42,6 +42,8 @@
#include <trace/events/scsi.h>
+static void scsi_eh_done(struct scsi_cmnd *scmd);
+
#define SENSE_TIMEOUT (10*HZ)
/*
@@ -241,6 +243,14 @@
if (! scsi_command_normalize_sense(scmd, &sshdr))
return FAILED; /* no valid sense data */
+ if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+ /*
+ * nasty: for mid-layer issued TURs, we need to return the
+ * actual sense data without any recovery attempt. For eh
+ * issued ones, we need to try to recover and interpret
+ */
+ return SUCCESS;
+
if (scsi_sense_is_deferred(&sshdr))
return NEEDS_RETRY;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ffd7773..faa790f 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -776,7 +776,6 @@
}
if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
- req->errors = result;
if (result) {
if (sense_valid && req->sense) {
/*
@@ -792,6 +791,10 @@
if (!sense_deferred)
error = __scsi_error_from_host_byte(cmd, result);
}
+ /*
+ * __scsi_error_from_host_byte may have reset the host_byte
+ */
+ req->errors = cmd->result;
req->resid_len = scsi_get_resid(cmd);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 56a9379..d947ffc 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -764,6 +764,16 @@
sdev->model = (char *) (sdev->inquiry + 16);
sdev->rev = (char *) (sdev->inquiry + 32);
+ if (strncmp(sdev->vendor, "ATA ", 8) == 0) {
+ /*
+ * sata emulation layer device. This is a hack to work around
+ * the SATL power management specifications which state that
+ * when the SATL detects the device has gone into standby
+ * mode, it shall respond with NOT READY.
+ */
+ sdev->allow_restart = 1;
+ }
+
if (*bflags & BLIST_ISROM) {
sdev->type = TYPE_ROM;
sdev->removable = 1;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b55..2d198a01 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -366,7 +366,7 @@
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
- depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
+ depends on ARCH_TEGRA && TEGRA20_APB_DMA
help
SPI driver for NVidia Tegra SoCs
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index a3996a1..0a94d9d 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -52,7 +52,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index b2fb141..b9b7ad0 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -42,7 +42,7 @@
#include <linux/spi/spi.h>
#include <plat/clock.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
#define SPI_AUTOSUSPEND_TIMEOUT 2000
diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c
index ef52c1c..488d9b6 100644
--- a/drivers/spi/spi-tegra.c
+++ b/drivers/spi/spi-tegra.c
@@ -164,23 +164,15 @@
* for the generic case.
*/
int dma_req_len;
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- struct tegra_dma_req rx_dma_req;
- struct tegra_dma_channel *rx_dma;
-#else
struct dma_chan *rx_dma;
struct dma_slave_config sconfig;
struct dma_async_tx_descriptor *rx_dma_desc;
dma_cookie_t rx_cookie;
-#endif
u32 *rx_bb;
dma_addr_t rx_bb_phys;
};
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
static void tegra_spi_rx_dma_complete(void *args);
-#endif
-
static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi,
unsigned long reg)
{
@@ -204,10 +196,6 @@
val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN;
val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1);
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.size = tspi->dma_req_len;
- tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req);
-#else
tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma,
tspi->rx_bb_phys, tspi->dma_req_len,
DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
@@ -219,7 +207,6 @@
tspi->rx_dma_desc->callback_param = tspi;
tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc);
dma_async_issue_pending(tspi->rx_dma);
-#endif
val |= SLINK_DMA_EN;
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
@@ -405,19 +392,12 @@
spin_unlock_irqrestore(&tspi->lock, flags);
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
-{
- struct spi_tegra_data *tspi = req->dev;
- handle_spi_rx_dma_complete(tspi);
-}
-#else
+
static void tegra_spi_rx_dma_complete(void *args)
{
struct spi_tegra_data *tspi = args;
handle_spi_rx_dma_complete(tspi);
}
-#endif
static int spi_tegra_setup(struct spi_device *spi)
{
@@ -509,9 +489,7 @@
struct spi_tegra_data *tspi;
struct resource *r;
int ret;
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
dma_cap_mask_t mask;
-#endif
master = spi_alloc_master(&pdev->dev, sizeof *tspi);
if (master == NULL) {
@@ -563,14 +541,6 @@
INIT_LIST_HEAD(&tspi->queue);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
- if (!tspi->rx_dma) {
- dev_err(&pdev->dev, "can not allocate rx dma channel\n");
- ret = -ENODEV;
- goto err3;
- }
-#else
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
tspi->rx_dma = dma_request_channel(mask, NULL, NULL);
@@ -580,8 +550,6 @@
goto err3;
}
-#endif
-
tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
&tspi->rx_bb_phys, GFP_KERNEL);
if (!tspi->rx_bb) {
@@ -590,17 +558,6 @@
goto err4;
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete;
- tspi->rx_dma_req.to_memory = 1;
- tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys;
- tspi->rx_dma_req.dest_bus_width = 32;
- tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO;
- tspi->rx_dma_req.source_bus_width = 32;
- tspi->rx_dma_req.source_wrap = 4;
- tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id];
- tspi->rx_dma_req.dev = tspi;
-#else
/* Dmaengine Dma slave config */
tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO;
@@ -616,7 +573,6 @@
ret);
goto err4;
}
-#endif
master->dev.of_node = pdev->dev.of_node;
ret = spi_register_master(master);
@@ -630,11 +586,7 @@
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
err4:
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
err3:
clk_put(tspi->clk);
err2:
@@ -656,12 +608,7 @@
tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
-
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h
index d0cafd6..f2ffd96 100644
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@@ -51,10 +51,12 @@
#define ANDROID_ALARM_WAIT _IO('a', 1)
#define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size)
+#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size)
+
/* Set alarm */
#define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec)
#define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec)
#define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec)
#define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0)))
#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4)
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 6c81e377..cc8931f 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -1412,6 +1412,13 @@
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in dio200_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via dio200_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return dio200_pci_common_attach(dev, pci_dev);
}
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index aabba98..f502879 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -565,6 +565,13 @@
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc236_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc236_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc236_pci_common_attach(dev, pci_dev);
}
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 40ec1ff..8191c4e 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -298,6 +298,13 @@
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pc263_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pc263_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pc263_pci_common_attach(dev, pci_dev);
}
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 4e17f13..8bf109e 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -1503,6 +1503,13 @@
DRIVER_NAME ": BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci224_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci224_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci224_attach_common(dev, pci_dev, NULL);
}
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 1b67d0c..66e74bd 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -2925,6 +2925,13 @@
"amplc_pci230: BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in pci230_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via pci230_attach()
+ * has been removed.
+ */
+ pci_dev_get(pci_dev);
return pci230_attach_common(dev, pci_dev);
}
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 874e02e..67a914a 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -378,7 +378,7 @@
int chan;
lsb = data[0] & 0xff;
- msb = (data[0] >> 8) & 0xf;
+ msb = (data[0] >> 8) & 0xff;
chan = CR_CHAN(insn->chanspec);
@@ -623,7 +623,7 @@
.ai = das08_ai_rinsn,
.ai_nbits = 16,
.ai_pg = das08_pg_none,
- .ai_encoding = das08_encode12,
+ .ai_encoding = das08_encode16,
.ao = das08jr_ao_winsn,
.ao_nbits = 16,
.di = das08jr_di_rbits,
@@ -922,6 +922,13 @@
dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
return -EINVAL;
}
+ /*
+ * Need to 'get' the PCI device to match the 'put' in das08_detach().
+ * TODO: Remove the pci_dev_get() and matching pci_dev_put() once
+ * support for manual attachment of PCI devices via das08_attach()
+ * has been removed.
+ */
+ pci_dev_get(pdev);
return das08_pci_attach_common(dev, pdev);
}
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 18d108f..f3da590 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -121,8 +121,10 @@
if (rx_array == NULL)
return -ENOMEM;
ret = lis3l02dq_read_all(indio_dev, rx_array);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(rx_array);
return ret;
+ }
for (i = 0; i < scan_count; i++)
data[i] = combine_8_to_16(rx_array[i*4+1],
rx_array[i*4+3]);
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 0958372..19a064d 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -647,6 +647,8 @@
ret = strict_strtoul(buf, 10, &lval);
if (ret)
return ret;
+ if (lval == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (iio_buffer_enabled(indio_dev)) {
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index 93aa431..eb8e9d6 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -195,6 +195,8 @@
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
if (spi_get_device_id(st->us)) {
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index 1f4c177..a618327 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -234,6 +234,8 @@
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index f04ece7..3ccff18 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -425,6 +425,8 @@
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index 6cee28a..abb1e9c 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -445,6 +445,8 @@
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index b3f7e0fa9..eb0a2a9 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -385,6 +385,8 @@
ret = strict_strtol(buf, 10, &val);
if (ret)
return ret;
+ if (val == 0)
+ return -EINVAL;
mutex_lock(&indio_dev->mlock);
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 695ea35..d0a7e40 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -837,7 +837,7 @@
}
ret = mfd_add_devices(nvec->dev, -1, nvec_devices,
- ARRAY_SIZE(nvec_devices), base, 0);
+ ARRAY_SIZE(nvec_devices), base, 0, NULL);
if (ret)
dev_err(nvec->dev, "error adding subdevices\n");
diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c
index 5e2856c..55e9c86 100644
--- a/drivers/staging/omapdrm/omap_connector.c
+++ b/drivers/staging/omapdrm/omap_connector.c
@@ -48,13 +48,20 @@
mode->vsync_end = mode->vsync_start + timings->vsw;
mode->vtotal = mode->vsync_end + timings->vbp;
- /* note: whether or not it is interlaced, +/- h/vsync, etc,
- * which should be set in the mode flags, is not exposed in
- * the omap_video_timings struct.. but hdmi driver tracks
- * those separately so all we have to have to set the mode
- * is the way to recover these timings values, and the
- * omap_dss_driver would do the rest.
- */
+ mode->flags = 0;
+
+ if (timings->interlace)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+ if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH)
+ mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
}
static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
@@ -71,6 +78,22 @@
timings->vfp = mode->vsync_start - mode->vdisplay;
timings->vsw = mode->vsync_end - mode->vsync_start;
timings->vbp = mode->vtotal - mode->vsync_end;
+
+ timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ else
+ timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW;
+
+ timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+ timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
}
static void omap_connector_dpms(struct drm_connector *connector, int mode)
@@ -187,7 +210,7 @@
}
} else {
struct drm_display_mode *mode = drm_mode_create(dev);
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
dssdrv->get_timings(dssdev, &timings);
@@ -291,7 +314,7 @@
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev = omap_connector->dssdev;
struct omap_dss_driver *dssdrv = dssdev->driver;
- struct omap_video_timings timings;
+ struct omap_video_timings timings = {0};
copy_timings_drm_to_omap(&timings, mode);
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index d983219..758ce0a 100644
--- a/drivers/staging/ozwpan/ozcdev.c
+++ b/drivers/staging/ozwpan/ozcdev.c
@@ -8,6 +8,7 @@
#include <linux/cdev.h>
#include <linux/uaccess.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <linux/poll.h>
#include <linux/sched.h>
#include "ozconfig.h"
@@ -213,7 +214,7 @@
if (old_pd)
oz_pd_put(old_pd);
} else {
- if (!memcmp(addr, "\0\0\0\0\0\0", sizeof(addr))) {
+ if (is_zero_ether_addr(addr)) {
spin_lock_bh(&g_cdev.lock);
pd = g_cdev.active_pd;
g_cdev.active_pd = 0;
diff --git a/drivers/staging/rtl8712/recv_linux.c b/drivers/staging/rtl8712/recv_linux.c
index 0e26d5f..495ee12 100644
--- a/drivers/staging/rtl8712/recv_linux.c
+++ b/drivers/staging/rtl8712/recv_linux.c
@@ -117,13 +117,8 @@
if (skb == NULL)
goto _recv_indicatepkt_drop;
skb->data = precv_frame->u.hdr.rx_data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
- skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail -
- precv_frame->u.hdr.rx_head);
-#else
- skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail;
-#endif
skb->len = precv_frame->u.hdr.len;
+ skb_set_tail_pointer(skb, skb->len);
if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
index c7df34e..7d056bd 100644
--- a/drivers/staging/tidspbridge/core/dsp-clock.c
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -21,7 +21,7 @@
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
#include <plat/dmtimer.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index f9609ce..7bf55c4 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
/* ----------------------------------- Host OS */
diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
index 16a4aaf..55675b7 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
@@ -19,7 +19,7 @@
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index 7fda10c..f53ed98 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 3cac014..49c9b66 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
#include <linux/platform_device.h>
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index e4bdf2a..3aa895e 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -200,7 +200,7 @@
} else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
cbHeaderSize += 6;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
- if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
(*pwType == cpu_to_le16(0xF380))) {
cbHeaderSize -= 8;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index bb46452..b6e04e7 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1699,7 +1699,7 @@
// 802.1H
if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
if (pDevice->dwDiagRefCount == 0) {
- if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
(psEthHeader->wType == cpu_to_le16(0xF380))) {
memcpy((PBYTE) (pbyPayloadHead),
abySNAP_Bridgetunnel, 6);
@@ -2838,10 +2838,10 @@
Packet_Type = skb->data[ETH_HLEN+1];
Descriptor_type = skb->data[ETH_HLEN+1+1+2];
Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- /* 802.1x OR eapol-key challenge frame transfer */
- if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
- (Packet_Type == 3)) {
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ /* 802.1x OR eapol-key challenge frame transfer */
+ if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
+ (Packet_Type == 3)) {
bTxeapol_key = TRUE;
if(!(Key_info & BIT3) && //WPA or RSN group-key challenge
(Key_info & BIT8) && (Key_info & BIT9)) { //send 2/2 key
@@ -2987,19 +2987,19 @@
}
}
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
- if (pDevice->byBBType != BB_TYPE_11A) {
- pDevice->wCurrentRate = RATE_1M;
- pDevice->byACKRate = RATE_1M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- } else {
- pDevice->wCurrentRate = RATE_6M;
- pDevice->byACKRate = RATE_6M;
- pDevice->byTopCCKBasicRate = RATE_1M;
- pDevice->byTopOFDMBasicRate = RATE_6M;
- }
- }
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+ if (pDevice->byBBType != BB_TYPE_11A) {
+ pDevice->wCurrentRate = RATE_1M;
+ pDevice->byACKRate = RATE_1M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ } else {
+ pDevice->wCurrentRate = RATE_6M;
+ pDevice->byACKRate = RATE_6M;
+ pDevice->byTopCCKBasicRate = RATE_1M;
+ pDevice->byTopOFDMBasicRate = RATE_6M;
+ }
+ }
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n",
@@ -3015,7 +3015,7 @@
if (bNeedEncryption == TRUE) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
- if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+ if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
bNeedEncryption = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index fabff4d..0970127 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -327,9 +327,9 @@
return result;
}
-int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_scan_request *request)
+int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
{
+ struct net_device *dev = request->wdev->netdev;
struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
wlandevice_t *wlandev = dev->ml_priv;
struct p80211msg_dot11req_scan msg1;
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index c214977..52b43b7 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1251,13 +1251,12 @@
void *pampd, struct tmem_pool *pool,
struct tmem_oid *oid, uint32_t index)
{
- int ret = 0;
-
BUG_ON(!is_ephemeral(pool));
- zbud_decompress((struct page *)(data), pampd);
+ if (zbud_decompress((struct page *)(data), pampd) < 0)
+ return -EINVAL;
zbud_free_and_delist((struct zbud_hdr *)pampd);
atomic_dec(&zcache_curr_eph_pampd_count);
- return ret;
+ return 0;
}
/*
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index 0694d9b..6aba439 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -221,6 +221,7 @@
{
struct iscsi_session *sess = NULL;
struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf;
+ int ret;
sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL);
if (!sess) {
@@ -257,9 +258,17 @@
return -ENOMEM;
}
spin_lock(&sess_idr_lock);
- idr_get_new(&sess_idr, NULL, &sess->session_index);
+ ret = idr_get_new(&sess_idr, NULL, &sess->session_index);
spin_unlock(&sess_idr_lock);
+ if (ret < 0) {
+ pr_err("idr_get_new() for sess_idr failed\n");
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
+ ISCSI_LOGIN_STATUS_NO_RESOURCES);
+ kfree(sess);
+ return -ENOMEM;
+ }
+
sess->creation_time = get_jiffies_64();
spin_lock_init(&sess->session_stats_lock);
/*
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 9179997..41641ba 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -218,6 +218,13 @@
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return -EINVAL;
}
+ if (cmd->data_length < 4) {
+ pr_warn("SET TARGET PORT GROUPS parameter list length %u too"
+ " small\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index cf2c66f..9fc9a60 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -669,6 +669,13 @@
unsigned char *buf;
u32 lun_count = 0, offset = 8, i;
+ if (se_cmd->data_length < 16) {
+ pr_warn("REPORT LUNS allocation length %u too small\n",
+ se_cmd->data_length);
+ se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(se_cmd);
if (!buf)
return -ENOMEM;
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 76db75e..9ba4954 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -325,17 +325,30 @@
struct iblock_dev *ibd = dev->dev_ptr;
unsigned char *buf, *ptr = NULL;
sector_t lba;
- int size = cmd->data_length;
+ int size;
u32 range;
int ret = 0;
int dl, bd_dl;
+ if (cmd->data_length < 8) {
+ pr_warn("UNMAP parameter list length %u too small\n",
+ cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ return -EINVAL;
+ }
+
buf = transport_kmap_data_sg(cmd);
dl = get_unaligned_be16(&buf[0]);
bd_dl = get_unaligned_be16(&buf[2]);
- size = min(size - 8, bd_dl);
+ size = cmd->data_length - 8;
+ if (bd_dl > size)
+ pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n",
+ cmd->data_length, bd_dl);
+ else
+ size = bd_dl;
+
if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) {
cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
ret = -EINVAL;
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 1e94650..956c84c 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1540,6 +1540,14 @@
tidh_new->dest_local_nexus = 1;
list_add_tail(&tidh_new->dest_list, &tid_dest_list);
+ if (cmd->data_length < 28) {
+ pr_warn("SPC-PR: Received PR OUT parameter list"
+ " length too small: %u\n", cmd->data_length);
+ cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST;
+ ret = -EINVAL;
+ goto out;
+ }
+
buf = transport_kmap_data_sg(cmd);
/*
* For a PERSISTENT RESERVE OUT specify initiator ports payload,
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 5552fa7..9d7ce3d 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -667,7 +667,8 @@
kfree(pdv);
}
-static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg)
+static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
+ unsigned char *sense_buffer)
{
struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr;
struct scsi_device *sd = pdv->pdv_sd;
@@ -679,7 +680,7 @@
* not been allocated because TCM is handling the emulation directly.
*/
if (!pt)
- return 0;
+ return;
cdb = &pt->pscsi_cdb[0];
result = pt->pscsi_result;
@@ -687,11 +688,11 @@
* Hack to make sure that Write-Protect modepage is set if R/O mode is
* forced.
*/
+ if (!cmd->se_deve || !cmd->data_length)
+ goto after_mode_sense;
+
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
(status_byte(result) << 1) == SAM_STAT_GOOD) {
- if (!cmd->se_deve)
- goto after_mode_sense;
-
if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) {
unsigned char *buf = transport_kmap_data_sg(cmd);
@@ -708,7 +709,7 @@
}
after_mode_sense:
- if (sd->type != TYPE_TAPE)
+ if (sd->type != TYPE_TAPE || !cmd->data_length)
goto after_mode_select;
/*
@@ -750,10 +751,10 @@
}
after_mode_select:
- if (status_byte(result) & CHECK_CONDITION)
- return 1;
-
- return 0;
+ if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) {
+ memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER);
+ cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ }
}
enum {
@@ -1184,13 +1185,6 @@
return -ENOMEM;
}
-static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd)
-{
- struct pscsi_plugin_task *pt = cmd->priv;
-
- return pt->pscsi_sense;
-}
-
/* pscsi_get_device_rev():
*
*
@@ -1273,7 +1267,6 @@
.check_configfs_dev_params = pscsi_check_configfs_dev_params,
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
- .get_sense_buffer = pscsi_get_sense_buffer,
.get_device_rev = pscsi_get_device_rev,
.get_device_type = pscsi_get_device_type,
.get_blocks = pscsi_get_blocks,
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 4c861de..388a922 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -877,9 +877,11 @@
static int spc_emulate_request_sense(struct se_cmd *cmd)
{
unsigned char *cdb = cmd->t_task_cdb;
- unsigned char *buf;
+ unsigned char *rbuf;
u8 ua_asc = 0, ua_ascq = 0;
- int err = 0;
+ unsigned char buf[SE_SENSE_BUF];
+
+ memset(buf, 0, SE_SENSE_BUF);
if (cdb[1] & 0x01) {
pr_err("REQUEST_SENSE description emulation not"
@@ -888,20 +890,21 @@
return -ENOSYS;
}
- buf = transport_kmap_data_sg(cmd);
-
- if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
+ rbuf = transport_kmap_data_sg(cmd);
+ if (cmd->scsi_sense_reason != 0) {
+ /*
+ * Out of memory. We will fail with CHECK CONDITION, so
+ * we must not clear the unit attention condition.
+ */
+ target_complete_cmd(cmd, CHECK_CONDITION);
+ return 0;
+ } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
/*
* CURRENT ERROR, UNIT ATTENTION
*/
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* The Additional Sense Code (ASC) from the UNIT ATTENTION
*/
@@ -915,11 +918,6 @@
buf[0] = 0x70;
buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
- if (cmd->data_length < 18) {
- buf[7] = 0x00;
- err = -EINVAL;
- goto end;
- }
/*
* NO ADDITIONAL SENSE INFORMATION
*/
@@ -927,8 +925,11 @@
buf[7] = 0x0A;
}
-end:
- transport_kunmap_data_sg(cmd);
+ if (rbuf) {
+ memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length));
+ transport_kunmap_data_sg(cmd);
+ }
+
target_complete_cmd(cmd, GOOD);
return 0;
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 4de3186..269f544 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -567,6 +567,34 @@
transport_generic_request_failure(cmd);
}
+/*
+ * Used when asking transport to copy Sense Data from the underlying
+ * Linux/SCSI struct scsi_cmnd
+ */
+static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd)
+{
+ unsigned char *buffer = cmd->sense_buffer;
+ struct se_device *dev = cmd->se_dev;
+ u32 offset = 0;
+
+ WARN_ON(!cmd->se_lun);
+
+ if (!dev)
+ return NULL;
+
+ if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION)
+ return NULL;
+
+ offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
+
+ /* Automatically padded */
+ cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
+
+ pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n",
+ dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
+ return &buffer[offset];
+}
+
void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
{
struct se_device *dev = cmd->se_dev;
@@ -580,11 +608,11 @@
cmd->transport_state &= ~CMD_T_BUSY;
if (dev && dev->transport->transport_complete) {
- if (dev->transport->transport_complete(cmd,
- cmd->t_data_sg) != 0) {
- cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ dev->transport->transport_complete(cmd,
+ cmd->t_data_sg,
+ transport_get_sense_buffer(cmd));
+ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)
success = 1;
- }
}
/*
@@ -1181,15 +1209,20 @@
/* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
goto out_invalid_cdb_field;
}
-
+ /*
+ * For the overflow case keep the existing fabric provided
+ * ->data_length. Otherwise for the underflow case, reset
+ * ->data_length to the smaller SCSI expected data transfer
+ * length.
+ */
if (size > cmd->data_length) {
cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
cmd->residual_count = (size - cmd->data_length);
} else {
cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
cmd->residual_count = (cmd->data_length - size);
+ cmd->data_length = size;
}
- cmd->data_length = size;
}
return 0;
@@ -1816,61 +1849,6 @@
EXPORT_SYMBOL(target_execute_cmd);
/*
- * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd
- */
-static int transport_get_sense_data(struct se_cmd *cmd)
-{
- unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL;
- struct se_device *dev = cmd->se_dev;
- unsigned long flags;
- u32 offset = 0;
-
- WARN_ON(!cmd->se_lun);
-
- if (!dev)
- return 0;
-
- spin_lock_irqsave(&cmd->t_state_lock, flags);
- if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) {
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return 0;
- }
-
- if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE))
- goto out;
-
- if (!dev->transport->get_sense_buffer) {
- pr_err("dev->transport->get_sense_buffer is NULL\n");
- goto out;
- }
-
- sense_buffer = dev->transport->get_sense_buffer(cmd);
- if (!sense_buffer) {
- pr_err("ITT 0x%08x cmd %p: Unable to locate"
- " sense buffer for task with sense\n",
- cmd->se_tfo->get_task_tag(cmd), cmd);
- goto out;
- }
-
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
-
- offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER);
-
- memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER);
-
- /* Automatically padded */
- cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset;
-
- pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n",
- dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
- return 0;
-
-out:
- spin_unlock_irqrestore(&cmd->t_state_lock, flags);
- return -1;
-}
-
-/*
* Process all commands up to the last received ORDERED task attribute which
* requires another blocking boundary
*/
@@ -1985,7 +1963,7 @@
static void target_complete_ok_work(struct work_struct *work)
{
struct se_cmd *cmd = container_of(work, struct se_cmd, work);
- int reason = 0, ret;
+ int ret;
/*
* Check if we need to move delayed/dormant tasks from cmds on the
@@ -2002,23 +1980,19 @@
schedule_work(&cmd->se_dev->qf_work_queue);
/*
- * Check if we need to retrieve a sense buffer from
+ * Check if we need to send a sense buffer from
* the struct se_cmd in question.
*/
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) {
- if (transport_get_sense_data(cmd) < 0)
- reason = TCM_NON_EXISTENT_LUN;
+ WARN_ON(!cmd->scsi_status);
+ ret = transport_send_check_condition_and_sense(
+ cmd, 0, 1);
+ if (ret == -EAGAIN || ret == -ENOMEM)
+ goto queue_full;
- if (cmd->scsi_status) {
- ret = transport_send_check_condition_and_sense(
- cmd, reason, 1);
- if (ret == -EAGAIN || ret == -ENOMEM)
- goto queue_full;
-
- transport_lun_remove_cmd(cmd);
- transport_cmd_check_stop_to_fabric(cmd);
- return;
- }
+ transport_lun_remove_cmd(cmd);
+ transport_cmd_check_stop_to_fabric(cmd);
+ return;
}
/*
* Check for a callback, used by amongst other things
@@ -2216,7 +2190,6 @@
struct page **pages;
int i;
- BUG_ON(!sg);
/*
* We need to take into account a possible offset here for fabrics like
* tcm_loop who may be using a contig buffer from the SCSI midlayer for
@@ -2224,13 +2197,17 @@
*/
if (!cmd->t_data_nents)
return NULL;
- else if (cmd->t_data_nents == 1)
+
+ BUG_ON(!sg);
+ if (cmd->t_data_nents == 1)
return kmap(sg_page(sg)) + sg->offset;
/* >1 page. use vmap */
pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL);
- if (!pages)
+ if (!pages) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
/* convert sg[] to pages[] */
for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) {
@@ -2239,8 +2216,10 @@
cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL);
kfree(pages);
- if (!cmd->t_data_vmap)
+ if (!cmd->t_data_vmap) {
+ cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
return NULL;
+ }
return cmd->t_data_vmap + cmd->t_data_sg[0].offset;
}
@@ -2326,19 +2305,14 @@
* into the fabric for data transfers, go ahead and complete it right
* away.
*/
- if (!cmd->data_length) {
+ if (!cmd->data_length &&
+ cmd->t_task_cdb[0] != REQUEST_SENSE &&
+ cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) {
spin_lock_irq(&cmd->t_state_lock);
cmd->t_state = TRANSPORT_COMPLETE;
cmd->transport_state |= CMD_T_ACTIVE;
spin_unlock_irq(&cmd->t_state_lock);
- if (cmd->t_task_cdb[0] == REQUEST_SENSE) {
- u8 ua_asc = 0, ua_ascq = 0;
-
- core_scsi3_ua_clear_for_request_sense(cmd,
- &ua_asc, &ua_ascq);
- }
-
INIT_WORK(&cmd->work, target_complete_ok_work);
queue_work(target_completion_wq, &cmd->work);
return 0;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 72ec56e..5952b25 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -132,6 +132,7 @@
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
@@ -667,22 +668,11 @@
static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
{
unsigned int val;
- unsigned int ufcr_rfdiv;
- /* set receiver / transmitter trigger level.
- * RFDIV is set such way to satisfy requested uartclk value
- */
- val = TXTL << 10 | RXTL;
- ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
- / sport->port.uartclk;
-
- if(!ufcr_rfdiv)
- ufcr_rfdiv = 1;
-
- val |= UFCR_RFDIV_REG(ufcr_rfdiv);
-
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= TXTL << UFCR_TXTL_SHF | RXTL;
writel(val, sport->port.membase + UFCR);
-
return 0;
}
@@ -754,6 +744,7 @@
}
}
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
*/
@@ -807,7 +798,6 @@
/*
* Enable modem status interrupts
*/
- spin_lock_irqsave(&sport->port.lock,flags);
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock,flags);
@@ -837,10 +827,13 @@
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ unsigned long flags;
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
temp &= ~(UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
@@ -869,12 +862,14 @@
* Disable all interrupts, port and break condition.
*/
+ spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
if (USE_IRDA(sport))
temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
@@ -1217,6 +1212,9 @@
struct imx_port *sport = imx_ports[co->index];
struct imx_port_ucrs old_ucr;
unsigned int ucr1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/*
* First, save UCR1/2/3 and then disable interrupts
@@ -1242,6 +1240,8 @@
while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7065df6..7de2285 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -13,7 +13,6 @@
default y if PXA3xx
default y if ARCH_EP93XX
default y if ARCH_AT91
- default y if ARCH_PNX4008
default y if MFD_TC6393XB
default y if ARCH_W90X900
default y if ARCH_DAVINCI_DA8XX
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index c7a032a..d214448 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -78,8 +78,7 @@
}
/**
- * hw_device_state: enables/disables interrupts & starts/stops device (execute
- * without interruption)
+ * hw_device_state: enables/disables interrupts (execute without interruption)
* @dma: 0 => disable, !0 => enable and set dma engine
*
* This function returns an error code
@@ -91,9 +90,7 @@
/* interrupt, error, port change, reset, sleep/suspend */
hw_write(ci, OP_USBINTR, ~0,
USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
- hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
} else {
- hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
hw_write(ci, OP_USBINTR, ~0, 0);
}
return 0;
@@ -774,10 +771,7 @@
{
struct ci13xxx_req *mReq, *mReqTemp;
struct ci13xxx_ep *mEpTemp = mEp;
- int uninitialized_var(retval);
-
- if (list_empty(&mEp->qh.queue))
- return -EINVAL;
+ int retval = 0;
list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
queue) {
@@ -1420,6 +1414,21 @@
return -ENOTSUPP;
}
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
+
+ if (is_on)
+ hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+ else
+ hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+ return 0;
+}
+
static int ci13xxx_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int ci13xxx_stop(struct usb_gadget *gadget,
@@ -1432,6 +1441,7 @@
static const struct usb_gadget_ops usb_gadget_ops = {
.vbus_session = ci13xxx_vbus_session,
.wakeup = ci13xxx_wakeup,
+ .pullup = ci13xxx_pullup,
.vbus_draw = ci13xxx_vbus_draw,
.udc_start = ci13xxx_start,
.udc_stop = ci13xxx_stop,
@@ -1455,7 +1465,12 @@
mEp->ep.name = mEp->name;
mEp->ep.ops = &usb_ep_ops;
- mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ /*
+ * for ep0: maxP defined in desc, for other
+ * eps, maxP is set by epautoconfig() called
+ * by gadget layer
+ */
+ mEp->ep.maxpacket = (unsigned short)~0;
INIT_LIST_HEAD(&mEp->qh.queue);
mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
@@ -1475,6 +1490,7 @@
else
ci->ep0in = mEp;
+ mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
continue;
}
@@ -1484,6 +1500,17 @@
return retval;
}
+static void destroy_eps(struct ci13xxx *ci)
+{
+ int i;
+
+ for (i = 0; i < ci->hw_ep_max; i++) {
+ struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
+
+ dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+ }
+}
+
/**
* ci13xxx_start: register a gadget driver
* @gadget: our gadget
@@ -1691,7 +1718,7 @@
if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (ci->transceiver == NULL) {
retval = -ENODEV;
- goto free_pools;
+ goto destroy_eps;
}
}
@@ -1729,7 +1756,7 @@
remove_trans:
if (!IS_ERR_OR_NULL(ci->transceiver)) {
- otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+ otg_set_peripheral(ci->transceiver->otg, NULL);
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
@@ -1742,6 +1769,8 @@
put_transceiver:
if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
usb_put_phy(ci->transceiver);
+destroy_eps:
+ destroy_eps(ci);
free_pools:
dma_pool_destroy(ci->td_pool);
free_qh_pool:
@@ -1756,18 +1785,12 @@
*/
static void udc_stop(struct ci13xxx *ci)
{
- int i;
-
if (ci == NULL)
return;
usb_del_gadget_udc(&ci->gadget);
- for (i = 0; i < ci->hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
-
- dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
- }
+ destroy_eps(ci);
dma_pool_destroy(ci->td_pool);
dma_pool_destroy(ci->qh_pool);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 65a55ab..5f0cb41 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -109,12 +109,14 @@
/* return intfdata if we own the interface, else look up intf in the list */
static struct wdm_device *wdm_find_device(struct usb_interface *intf)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf == intf)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
@@ -122,12 +124,14 @@
static struct wdm_device *wdm_find_device_by_minor(int minor)
{
- struct wdm_device *desc = NULL;
+ struct wdm_device *desc;
spin_lock(&wdm_device_list_lock);
list_for_each_entry(desc, &wdm_device_list, device_list)
if (desc->intf->minor == minor)
- break;
+ goto found;
+ desc = NULL;
+found:
spin_unlock(&wdm_device_list_lock);
return desc;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f15501f4c..e77a8e8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -71,6 +71,10 @@
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Microchip Joss Optical infrared touchboard device */
+ { USB_DEVICE(0x04d8, 0x000c), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c34452a..a68ff53 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -436,16 +436,21 @@
dev_err(dev, "missing IRQ\n");
return -ENODEV;
}
- dwc->xhci_resources[1] = *res;
+ dwc->xhci_resources[1].start = res->start;
+ dwc->xhci_resources[1].end = res->end;
+ dwc->xhci_resources[1].flags = res->flags;
+ dwc->xhci_resources[1].name = res->name;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
return -ENODEV;
}
- dwc->xhci_resources[0] = *res;
+ dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
+ dwc->xhci_resources[0].flags = res->flags;
+ dwc->xhci_resources[0].name = res->name;
/*
* Request memory region but exclude xHCI regs,
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 9b94886..e4d5ca8 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -720,7 +720,6 @@
transferred = min_t(u32, ur->length,
transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
- dwc->ep0_bounced = false;
} else {
transferred = ur->length - length;
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 58fdfad..c2813c2b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -263,8 +263,11 @@
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+ if (dwc->ep0_bounced && dep->number == 0)
+ dwc->ep0_bounced = false;
+ else
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
req, dep->name, req->request.actual,
@@ -1026,6 +1029,7 @@
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
dep->name);
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
return;
}
@@ -1089,6 +1093,17 @@
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
int ret;
+ /*
+ * If xfernotready is already elapsed and it is a case
+ * of isoc transfer, then issue END TRANSFER, so that
+ * you can receive xfernotready again and can have
+ * notion of current microframe.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ dwc3_stop_active_transfer(dwc, dep->number);
+ return 0;
+ }
+
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
if (ret && ret != -EBUSY) {
struct dwc3 *dwc = dep->dwc;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index c9e66df..1e35963 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -475,8 +475,7 @@
unsigned long flags;
if (!_ep || !ep
- || !desc || ep->ep.desc
- || _ep->name == ep0name
+ || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| (maxpacket = usb_endpoint_maxp(desc)) == 0
|| maxpacket > ep->maxpacket) {
@@ -530,7 +529,6 @@
tmp |= AT91_UDP_EPEDS;
__raw_writel(tmp, ep->creg);
- ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
/*
@@ -1635,7 +1633,6 @@
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
udc->gadget.dev.of_node = udc->pdev->dev.of_node;
- dev_set_drvdata(&udc->gadget.dev, &driver->driver);
udc->enabled = 1;
udc->selfpowered = 1;
@@ -1656,7 +1653,6 @@
spin_unlock_irqrestore(&udc->lock, flags);
udc->gadget.dev.driver = NULL;
- dev_set_drvdata(&udc->gadget.dev, NULL);
udc->driver = NULL;
DBG("unbound from %s\n", driver->driver.name);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index b799106..afdbb1c 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1916,6 +1916,27 @@
return retval;
}
+/* usb 3.0 root hub device descriptor */
+struct {
+ struct usb_bos_descriptor bos;
+ struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+ .bos = {
+ .bLength = USB_DT_BOS_SIZE,
+ .bDescriptorType = USB_DT_BOS,
+ .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
+ .bNumDeviceCaps = 1,
+ },
+ .ss_cap = {
+ .bLength = USB_DT_USB_SS_CAP_SIZE,
+ .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+ .bDevCapabilityType = USB_SS_CAP_TYPE,
+ .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
+ .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
+ },
+};
+
static inline void
ss_hub_descriptor(struct usb_hub_descriptor *desc)
{
@@ -2006,6 +2027,18 @@
else
hub_descriptor((struct usb_hub_descriptor *) buf);
break;
+
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ if ((wValue >> 8) != USB_DT_BOS)
+ goto error;
+
+ memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+ retval = sizeof(usb3_bos_desc);
+ break;
+
case GetHubStatus:
*(__le32 *) buf = cpu_to_le32(0);
break;
@@ -2503,10 +2536,8 @@
hs_hcd->has_tt = 1;
retval = usb_add_hcd(hs_hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd(hs_hcd);
- return retval;
- }
+ if (retval)
+ goto put_usb2_hcd;
if (mod_data.is_super_speed) {
ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
@@ -2525,6 +2556,8 @@
put_usb3_hcd:
usb_put_hcd(ss_hcd);
dealloc_usb2_hcd:
+ usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
usb_put_hcd(hs_hcd);
the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 8adc79d..829aba7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -34,11 +34,15 @@
/* Debugging ****************************************************************/
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
# define pr_vdebug pr_debug
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) \
print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
#else
+#ifndef pr_vdebug
# define pr_vdebug(...) do { } while (0)
+#endif /* pr_vdebug */
# define ffs_dump_mem(prefix, ptr, len) do { } while (0)
#endif /* VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index b13e0bb..0bb617e 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3599,6 +3599,7 @@
if (hsotg->num_of_eps == 0) {
dev_err(dev, "wrong number of EPs (zero)\n");
+ ret = -EINVAL;
goto err_supplies;
}
@@ -3606,6 +3607,7 @@
GFP_KERNEL);
if (!eps) {
dev_err(dev, "cannot get memory\n");
+ ret = -ENOMEM;
goto err_supplies;
}
@@ -3622,6 +3624,7 @@
GFP_KERNEL);
if (!hsotg->ctrl_req) {
dev_err(dev, "failed to allocate ctrl req\n");
+ ret = -ENOMEM;
goto err_ep_mem;
}
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 2b5534c2..f173952 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -132,11 +132,15 @@
#ifdef VERBOSE_DEBUG
+#ifndef pr_vdebug
#define pr_vdebug(fmt, arg...) \
pr_debug(fmt, ##arg)
+#endif /* pr_vdebug */
#else
+#ifndef pr_vdebig
#define pr_vdebug(fmt, arg...) \
({ if (0) pr_debug(fmt, ##arg); })
+#endif /* pr_vdebug */
#endif
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 075d2ec..276add2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -292,7 +292,7 @@
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
select USB_OTG_UTILS if ARCH_OMAP
- select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008
+ select USB_ISP1301 if ARCH_LPC32XX
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 9bc39ca..4b66374 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -128,9 +128,17 @@
else {
qtd = list_entry (qh->qtd_list.next,
struct ehci_qtd, qtd_list);
- /* first qtd may already be partially processed */
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+ /*
+ * first qtd may already be partially processed.
+ * If we come here during unlink, the QH overlay region
+ * might have reference to the just unlinked qtd. The
+ * qtd is updated in qh_completions(). Update the QH
+ * overlay here.
+ */
+ if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
+ }
}
if (qtd)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a665b3e..aaa8d2b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -570,6 +570,16 @@
if (pdata) {
at91_for_each_port(i) {
+ /*
+ * do not configure PIO if not in relation with
+ * real USB port on board
+ */
+ if (i >= pdata->ports) {
+ pdata->vbus_pin[i] = -EINVAL;
+ pdata->overcurrent_pin[i] = -EINVAL;
+ break;
+ }
+
if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
gpio = pdata->vbus_pin[i];
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 2b1e8d8..6780010 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1049,7 +1049,7 @@
#define PLATFORM_DRIVER ohci_hcd_at91_driver
#endif
-#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
+#ifdef CONFIG_ARCH_LPC32XX
#include "ohci-nxp.c"
#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index a446386..1199666 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -2,7 +2,6 @@
* driver for NXP USB Host devices
*
* Currently supported OHCI host devices:
- * - Philips PNX4008
* - NXP LPC32xx
*
* Authors: Dmitry Chigirev <source@mvista.com>
@@ -66,38 +65,6 @@
static struct clk *usb_dev_clk;
static struct clk *usb_otg_clk;
-static void isp1301_configure_pnx4008(void)
-{
- /* PNX4008 only supports DAT_SE0 USB mode */
- /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
- /* Power up externel charge-pump */
-
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC1_DAT_SE0 | MC1_SPEED_REG));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2,
- MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
-}
-
static void isp1301_configure_lpc32xx(void)
{
/* LPC32XX only supports DAT_SE0 USB mode */
@@ -149,10 +116,7 @@
static void isp1301_configure(void)
{
- if (machine_is_pnx4008())
- isp1301_configure_pnx4008();
- else
- isp1301_configure_lpc32xx();
+ isp1301_configure_lpc32xx();
}
static inline void isp1301_vbus_on(void)
@@ -241,47 +205,6 @@
.start_port_reset = ohci_start_port_reset,
};
-static void nxp_set_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
- start_int_ack(SE_USB_OTG_ATX_INT_N);
- start_int_umask(SE_USB_OTG_ATX_INT_N);
-
- start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
- start_int_ack(SE_USB_OTG_TIMER_INT);
- start_int_umask(SE_USB_OTG_TIMER_INT);
-
- start_int_set_rising_edge(SE_USB_I2C_INT);
- start_int_ack(SE_USB_I2C_INT);
- start_int_umask(SE_USB_I2C_INT);
-
- start_int_set_rising_edge(SE_USB_INT);
- start_int_ack(SE_USB_INT);
- start_int_umask(SE_USB_INT);
-
- start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
- start_int_ack(SE_USB_NEED_CLK_INT);
- start_int_umask(SE_USB_NEED_CLK_INT);
-
- start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
- start_int_ack(SE_USB_AHB_NEED_CLK_INT);
- start_int_umask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
-static void nxp_unset_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_mask(SE_USB_OTG_ATX_INT_N);
- start_int_mask(SE_USB_OTG_TIMER_INT);
- start_int_mask(SE_USB_I2C_INT);
- start_int_mask(SE_USB_INT);
- start_int_mask(SE_USB_NEED_CLK_INT);
- start_int_mask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
@@ -376,9 +299,6 @@
goto out8;
}
- /* Set all USB bits in the Start Enable register */
- nxp_set_usb_bits();
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get MEM resource\n");
@@ -413,7 +333,6 @@
nxp_stop_hc();
out8:
- nxp_unset_usb_bits();
usb_put_hcd(hcd);
out7:
clk_disable(usb_otg_clk);
@@ -441,7 +360,6 @@
nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- nxp_unset_usb_bits();
clk_disable(usb_pll_clk);
clk_put(usb_pll_clk);
clk_disable(usb_dev_clk);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f8b2d91..4531d03 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -24,7 +24,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index c5e9e4a..966d148 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
#define NB_PIF0_PWRDOWN_1 0x01100013
#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
static struct amd_chipset_info {
struct pci_dev *nb_dev;
@@ -772,10 +774,18 @@
return;
}
- ports_available = 0xffffffff;
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);
- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+ ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
@@ -822,12 +841,12 @@
void __iomem *op_reg_base;
u32 val;
int timeout;
+ int len = pci_resource_len(pdev, 0);
if (!mmio_resource_enabled(pdev, 0))
return;
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ base = ioremap_nocache(pci_resource_start(pdev, 0), len);
if (base == NULL)
return;
@@ -837,9 +856,17 @@
*/
ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
do {
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev,
+ "xHCI controller failing to respond");
+ return;
+ }
+
if (!ext_cap_offset)
/* We've reached the end of the extended capabilities */
goto hc_init;
+
val = readl(base + ext_cap_offset);
if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
break;
@@ -870,9 +897,10 @@
/* Disable any BIOS SMIs and clear all SMI events*/
writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+hc_init:
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
-hc_init:
+
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
/* Wait for the host controller to be ready before writing any
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index ef004a5..7f69a39 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -15,6 +15,7 @@
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 74bfc86..d5eb357 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -493,11 +493,48 @@
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -651,6 +688,11 @@
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 689bc18..df90fe5 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -118,7 +118,7 @@
goto put_hcd;
}
- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c59d5b5..6ece0ed 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include "xhci.h"
@@ -398,6 +399,95 @@
#endif
+static void compliance_mode_recovery(unsigned long arg)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ u32 temp;
+ int i;
+
+ xhci = (struct xhci_hcd *)arg;
+
+ for (i = 0; i < xhci->num_usb3_ports; i++) {
+ temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /*
+ * Compliance Mode Detected. Letting USB Core
+ * handle the Warm Reset
+ */
+ xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+ i + 1);
+ xhci_dbg(xhci, "Attempting Recovery routine!\n");
+ hcd = xhci->shared_hcd;
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+ mod_timer(&xhci->comp_mode_recovery_timer,
+ jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ init_timer(&xhci->comp_mode_recovery_timer);
+
+ xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+ xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ xhci->comp_mode_recovery_timer.expires = jiffies +
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+ set_timer_slack(&xhci->comp_mode_recovery_timer,
+ msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+ if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+ return false;
+
+ if (strstr(dmi_product_name, "Z420") ||
+ strstr(dmi_product_name, "Z620") ||
+ strstr(dmi_product_name, "Z820"))
+ return true;
+
+ return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+ return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
@@ -421,6 +511,12 @@
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");
+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
return retval;
}
@@ -629,6 +725,11 @@
del_timer_sync(&xhci->event_ring_timer);
#endif
+ /* Deleting Compliance Mode Recovery Timer */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci))))
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_dev_put();
@@ -659,7 +760,7 @@
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+ if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
spin_lock_irq(&xhci->lock);
@@ -806,6 +907,16 @@
}
spin_unlock_irq(&xhci->lock);
+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (!(xhci_all_ports_seen_u0(xhci)))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+ }
+
/* step 5: remove core well power */
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
@@ -938,6 +1049,16 @@
usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
}
+
+ /*
+ * If system is subject to the Quirk, Compliance Mode Timer needs to
+ * be re-initialized Always after a system resume. Ports are subject
+ * to suffer the Compliance Mode issue again. It doesn't matter if
+ * ports have entered previously to U0 before system's suspension.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ compliance_mode_recovery_timer_init(xhci);
+
return retval;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c713256..1a05908 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1495,6 +1495,7 @@
#define XHCI_LPM_SUPPORT (1 << 11)
#define XHCI_INTEL_HOST (1 << 12)
#define XHCI_SPURIOUS_REBOOT (1 << 13)
+#define XHCI_COMP_MODE_QUIRK (1 << 14)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
@@ -1511,6 +1512,11 @@
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4bb717d..1ae378d 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2049,7 +2049,7 @@
* we only have work to do in the former case.
*/
spin_lock_irqsave(&musb->lock, flags);
- if (hep->hcpriv) {
+ if (hep->hcpriv || !next_urb(qh)) {
/* some concurrent activity submitted another urb to hep...
* odd, rare, error prone, but legal.
*/
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 57a6085..c1be687 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -388,7 +388,7 @@
struct platform_device *pdev = to_platform_device(dev);
int irq = platform_get_irq_byname(pdev, "dma");
- if (irq == 0) {
+ if (irq <= 0) {
dev_err(dev, "No DMA interrupt line!\n");
return NULL;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1a1bd9c..3416254 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1215,7 +1215,7 @@
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err1;
+ goto err2;
}
return 0;
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index b67b4bc..89f0709 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -17,7 +17,6 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include "musb_core.h"
#include "tusb6010.h"
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 7a88667..81f1f9a 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,7 +36,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index ecd1730..143c4e9 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -818,7 +818,7 @@
usbhs_pipe_is_dcp(pipe))
goto usbhsf_pio_prepare_push;
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_push;
if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
@@ -905,7 +905,7 @@
/* use PIO if packet is less than pio_dma_border */
len = usbhsf_fifo_rcv_len(priv, fifo);
len = min(pkt->length - pkt->actual, len);
- if (len % 4) /* 32bit alignment */
+ if (len & 0x7) /* 8byte alignment */
goto usbhsf_pio_prepare_pop_unselect;
if (len < usbhs_get_dparam(priv, pio_dma_border))
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 24e3e19..0c8d1c2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -704,6 +704,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
@@ -804,13 +805,32 @@
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0x00) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+ { USB_DEVICE(PI_VID, PI_C866_PID) },
+ { USB_DEVICE(PI_VID, PI_C663_PID) },
+ { USB_DEVICE(PI_VID, PI_C725_PID) },
+ { USB_DEVICE(PI_VID, PI_E517_PID) },
+ { USB_DEVICE(PI_VID, PI_C863_PID) },
{ USB_DEVICE(PI_VID, PI_E861_PID) },
+ { USB_DEVICE(PI_VID, PI_C867_PID) },
+ { USB_DEVICE(PI_VID, PI_E609_PID) },
+ { USB_DEVICE(PI_VID, PI_E709_PID) },
+ { USB_DEVICE(PI_VID, PI_100F_PID) },
+ { USB_DEVICE(PI_VID, PI_1011_PID) },
+ { USB_DEVICE(PI_VID, PI_1012_PID) },
+ { USB_DEVICE(PI_VID, PI_1013_PID) },
+ { USB_DEVICE(PI_VID, PI_1014_PID) },
+ { USB_DEVICE(PI_VID, PI_1015_PID) },
+ { USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5dd96ca..41fe582 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -75,6 +75,9 @@
#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
#define FTDI_OPENDCC_GBM_PID 0xBFDC
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
+
/*
* RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
*/
@@ -539,7 +542,10 @@
/*
* Microchip Technology, Inc.
*
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications. The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
* Hornby Elite - Digital Command Control Console
* http://www.hornby.com/hornby-dcc/controllers/
*/
@@ -791,8 +797,27 @@
* Physik Instrumente
* http://www.physikinstrumente.com/en/products/
*/
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */
+
#define PI_VID 0x1a72 /* Vendor ID */
-#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */
+#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
+#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID 0x1007 /* PI C-863 */
+#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */
+#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */
+#define PI_1012_PID 0x1012 /* PI Motion Controller */
+#define PI_1013_PID 0x1013 /* PI Motion Controller */
+#define PI_1014_PID 0x1014 /* PI Device */
+#define PI_1015_PID 0x1015 /* PI Device */
+#define PI_1016_PID 0x1016 /* PI Digital Servo Module */
/*
* Kondo Kagaku Co.Ltd.
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cc40f47..5ce88d1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,8 +886,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1092,6 +1090,10 @@
.driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index 92257ef..9a046a4 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -30,7 +30,7 @@
#include <linux/platform_data/omap1_bl.h>
#include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index d3a3113..ed4cad8 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -27,8 +27,7 @@
#include <linux/lcd.h>
#include <linux/gpio.h>
-#include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
+#include <mach/board-ams-delta.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index e3880c4..b739600 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -25,7 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/module.h>
-#include <plat/lcd_mipid.h>
+#include <linux/platform_data/lcd-mipid.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index 5914220..3aa62da 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -24,7 +24,7 @@
#include <linux/platform_device.h>
#include <asm/gpio.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 53d7571..ad1bb93 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -237,12 +237,12 @@
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
config PNX4008_WATCHDOG
- tristate "PNX4008 and LPC32XX Watchdog"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ tristate "LPC32XX Watchdog"
+ depends on ARCH_LPC32XX
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the PNX4008 or LPC32XX processor.
+ in the LPC32XX processor.
This driver can be built as a module by choosing M. The module
will be called pnx4008_wdt.
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 59e75d9..c1a4d3b 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -24,7 +24,19 @@
#include <linux/io.h>
#include <linux/uaccess.h>
#include <mach/hardware.h>
-#include <mach/regs-timer.h>
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 171 /* seconds */
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 38b42e7..b650155 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1371,10 +1371,8 @@
if (srcid) {
srcgroup = find_qgroup_rb(fs_info, srcid);
- if (!srcgroup) {
- ret = -EINVAL;
+ if (!srcgroup)
goto unlock;
- }
dstgroup->rfer = srcgroup->rfer - level_size;
dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size;
srcgroup->excl = level_size;
@@ -1383,10 +1381,8 @@
qgroup_dirty(fs_info, srcgroup);
}
- if (!inherit) {
- ret = -EINVAL;
+ if (!inherit)
goto unlock;
- }
i_qgroups = (u64 *)(inherit + 1);
for (i = 0; i < inherit->num_qgroups; ++i) {
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 9154192..71e9ad9 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -917,7 +917,7 @@
if (!buf) {
mutex_unlock(&cinode->lock_mutex);
free_xid(xid);
- return rc;
+ return -ENOMEM;
}
for (i = 0; i < 2; i++) {
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index c5fbfac..15dc8ee 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -96,7 +96,7 @@
*
*/
-#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64)
+#define SMB2_HEADER_STRUCTURE_SIZE __constant_cpu_to_le16(64)
struct smb2_hdr {
__be32 smb2_buf_length; /* big endian on wire */
@@ -140,7 +140,7 @@
*
*/
-#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9)
+#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_cpu_to_le16(9)
struct smb2_err_rsp {
struct smb2_hdr hdr;
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 44ce5c6..d45ba45 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -275,8 +275,14 @@
static int ecryptfs_flush(struct file *file, fl_owner_t td)
{
- return file->f_mode & FMODE_WRITE
- ? filemap_write_and_wait(file->f_mapping) : 0;
+ struct file *lower_file = ecryptfs_file_to_lower(file);
+
+ if (lower_file->f_op && lower_file->f_op->flush) {
+ filemap_write_and_wait(file->f_mapping);
+ return lower_file->f_op->flush(lower_file, td);
+ }
+
+ return 0;
}
static int ecryptfs_release(struct inode *inode, struct file *file)
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 534b129..cc7709e 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -619,6 +619,7 @@
struct dentry *lower_old_dir_dentry;
struct dentry *lower_new_dir_dentry;
struct dentry *trap = NULL;
+ struct inode *target_inode;
lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
@@ -626,6 +627,7 @@
dget(lower_new_dentry);
lower_old_dir_dentry = dget_parent(lower_old_dentry);
lower_new_dir_dentry = dget_parent(lower_new_dentry);
+ target_inode = new_dentry->d_inode;
trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
/* source should not be ancestor of target */
if (trap == lower_old_dentry) {
@@ -641,6 +643,9 @@
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
goto out_lock;
+ if (target_inode)
+ fsstack_copy_attr_all(target_inode,
+ ecryptfs_inode_to_lower(target_inode));
fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
if (new_dir != old_dir)
fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 2768138..9b627c1 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -162,6 +162,7 @@
inode_info = ecryptfs_inode_to_private(inode);
if (atomic_dec_and_mutex_lock(&inode_info->lower_file_count,
&inode_info->lower_file_mutex)) {
+ filemap_write_and_wait(inode->i_mapping);
fput(inode_info->lower_file);
inode_info->lower_file = NULL;
mutex_unlock(&inode_info->lower_file_mutex);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index a075973..ff574b4 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3072,6 +3072,8 @@
struct ext3_inode_info *ei = EXT3_I(inode);
struct buffer_head *bh = iloc->bh;
int err = 0, rc, block;
+ int need_datasync = 0;
+ __le32 disksize;
uid_t i_uid;
gid_t i_gid;
@@ -3113,7 +3115,11 @@
raw_inode->i_gid_high = 0;
}
raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
- raw_inode->i_size = cpu_to_le32(ei->i_disksize);
+ disksize = cpu_to_le32(ei->i_disksize);
+ if (disksize != raw_inode->i_size) {
+ need_datasync = 1;
+ raw_inode->i_size = disksize;
+ }
raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
@@ -3129,8 +3135,11 @@
if (!S_ISREG(inode->i_mode)) {
raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
} else {
- raw_inode->i_size_high =
- cpu_to_le32(ei->i_disksize >> 32);
+ disksize = cpu_to_le32(ei->i_disksize >> 32);
+ if (disksize != raw_inode->i_size_high) {
+ raw_inode->i_size_high = disksize;
+ need_datasync = 1;
+ }
if (ei->i_disksize > 0x7fffffffULL) {
struct super_block *sb = inode->i_sb;
if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
@@ -3183,6 +3192,8 @@
ext3_clear_inode_state(inode, EXT3_STATE_NEW);
atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
+ if (need_datasync)
+ atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
out_brelse:
brelse (bh);
ext3_std_error(inode->i_sb, err);
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 03ff5b1..75a20c0 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -117,7 +117,7 @@
const char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned val;
+ unsigned uninitialized_var(val);
ssize_t ret;
ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
@@ -154,7 +154,7 @@
const char __user *buf,
size_t count, loff_t *ppos)
{
- unsigned val;
+ unsigned uninitialized_var(val);
ssize_t ret;
ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index 3426521..ee8d550 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -396,7 +396,7 @@
err_region:
unregister_chrdev_region(devt, 1);
err:
- fc->conn_error = 1;
+ fuse_conn_kill(fc);
goto out;
}
@@ -532,8 +532,6 @@
cdev_del(cc->cdev);
}
- /* kill connection and shutdown channel */
- fuse_conn_kill(&cc->fc);
rc = fuse_dev_release(inode, file); /* puts the base reference */
return rc;
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 7df2b5e..f4246cf 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1576,6 +1576,7 @@
req->pages[req->num_pages] = page;
req->num_pages++;
+ offset = 0;
num -= this_num;
total_len += this_num;
index++;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index ce0a283..fca222d 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -367,11 +367,6 @@
wake_up_all(&fc->waitq);
wake_up_all(&fc->blocked_waitq);
wake_up_all(&fc->reserved_req_waitq);
- mutex_lock(&fuse_mutex);
- list_del(&fc->entry);
- fuse_ctl_remove_conn(fc);
- mutex_unlock(&fuse_mutex);
- fuse_bdi_destroy(fc);
}
EXPORT_SYMBOL_GPL(fuse_conn_kill);
@@ -380,7 +375,14 @@
struct fuse_conn *fc = get_fuse_conn_super(sb);
fuse_send_destroy(fc);
+
fuse_conn_kill(fc);
+ mutex_lock(&fuse_mutex);
+ list_del(&fc->entry);
+ fuse_ctl_remove_conn(fc);
+ mutex_unlock(&fuse_mutex);
+ fuse_bdi_destroy(fc);
+
fuse_conn_put(fc);
}
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index d1d791e..382000f 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -323,6 +323,29 @@
}
/**
+ * gfs2_size_hint - Give a hint to the size of a write request
+ * @file: The struct file
+ * @offset: The file offset of the write
+ * @size: The length of the write
+ *
+ * When we are about to do a write, this function records the total
+ * write size in order to provide a suitable hint to the lower layers
+ * about how many blocks will be required.
+ *
+ */
+
+static void gfs2_size_hint(struct file *filep, loff_t offset, size_t size)
+{
+ struct inode *inode = filep->f_dentry->d_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+ size_t blks = (size + sdp->sd_sb.sb_bsize - 1) >> sdp->sd_sb.sb_bsize_shift;
+ int hint = min_t(size_t, INT_MAX, blks);
+
+ atomic_set(&ip->i_res->rs_sizehint, hint);
+}
+
+/**
* gfs2_allocate_page_backing - Use bmap to allocate blocks
* @page: The (locked) page to allocate backing for
*
@@ -382,8 +405,7 @@
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint,
- PAGE_CACHE_SIZE >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
@@ -663,7 +685,8 @@
if (ret)
return ret;
- atomic_set(&ip->i_res->rs_sizehint, writesize >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, pos, writesize);
+
if (file->f_flags & O_APPEND) {
struct gfs2_holder gh;
@@ -789,7 +812,7 @@
if (unlikely(error))
goto out_uninit;
- atomic_set(&ip->i_res->rs_sizehint, len >> sdp->sd_sb.sb_bsize_shift);
+ gfs2_size_hint(file, offset, len);
while (len > 0) {
if (len < bytes)
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 4ce22e5..753af3d 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1722,7 +1722,9 @@
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_setxattr(dentry, name, data, size, flags);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_setxattr(dentry, name, data, size, flags);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
@@ -1757,7 +1759,9 @@
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
ret = gfs2_glock_nq(&gh);
if (ret == 0) {
- ret = generic_removexattr(dentry, name);
+ ret = gfs2_rs_alloc(ip);
+ if (ret == 0)
+ ret = generic_removexattr(dentry, name);
gfs2_glock_dq(&gh);
}
gfs2_holder_uninit(&gh);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 4d34887..c9ed814 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1961,7 +1961,7 @@
* @dinode: 1 if this block is a dinode block, otherwise data block
* @nblocks: desired extent length
*
- * Lay claim to previously allocated block reservation blocks.
+ * Lay claim to previously reserved blocks.
* Returns: Starting block number of the blocks claimed.
* Sets *nblocks to the actual extent length allocated.
*/
@@ -1970,19 +1970,17 @@
{
struct gfs2_blkreserv *rs = ip->i_res;
struct gfs2_rgrpd *rgd = rs->rs_rgd;
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_bitmap *bi;
u64 start_block = gfs2_rs_startblk(rs);
const unsigned int elen = *nblocks;
- /*BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));*/
- gfs2_assert_withdraw(sdp, rgd);
- /*BUG_ON(!gfs2_glock_is_locked_by_me(rgd->rd_gl));*/
bi = rs->rs_bi;
gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
for (*nblocks = 0; *nblocks < elen && rs->rs_free; (*nblocks)++) {
- /* Make sure the bitmap hasn't changed */
+ if (gfs2_testbit(rgd, bi->bi_bh->b_data + bi->bi_offset,
+ bi->bi_len, rs->rs_biblk) != GFS2_BLKST_FREE)
+ break;
gfs2_setbit(rgd, bi->bi_clone, bi, rs->rs_biblk,
dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
rs->rs_biblk++;
@@ -1991,20 +1989,12 @@
BUG_ON(!rgd->rd_reserved);
rgd->rd_reserved--;
dinode = false;
- trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
}
- if (!rs->rs_free) {
- struct gfs2_rgrpd *rgd = ip->i_res->rs_rgd;
-
+ trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM);
+ if (!rs->rs_free || *nblocks != elen)
gfs2_rs_deltree(rs);
- /* -nblocks because we haven't returned to do the math yet.
- I'm doing the math backwards to prevent negative numbers,
- but think of it as:
- if (unclaimed_blocks(rgd) - *nblocks >= RGRP_RSRV_MINBLKS */
- if (unclaimed_blocks(rgd) >= RGRP_RSRV_MINBLKS + *nblocks)
- rg_mblk_search(rgd, ip);
- }
+
return start_block;
}
@@ -2037,34 +2027,34 @@
if (ip->i_res->rs_requested == 0)
return -ECANCELED;
- /* Check if we have a multi-block reservation, and if so, claim the
- next free block from it. */
+ /* If we have a reservation, claim blocks from it. */
if (gfs2_rs_active(ip->i_res)) {
BUG_ON(!ip->i_res->rs_free);
rgd = ip->i_res->rs_rgd;
block = claim_reserved_blks(ip, dinode, nblocks);
- } else {
- rgd = ip->i_rgd;
-
- if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
- goal = ip->i_goal - rgd->rd_data0;
- else
- goal = rgd->rd_last_alloc;
-
- blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
-
- /* Since all blocks are reserved in advance, this shouldn't
- happen */
- if (blk == BFITNOENT) {
- printk(KERN_WARNING "BFITNOENT, nblocks=%u\n",
- *nblocks);
- printk(KERN_WARNING "FULL=%d\n",
- test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
- goto rgrp_error;
- }
-
- block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+ if (*nblocks)
+ goto found_blocks;
}
+
+ rgd = ip->i_rgd;
+
+ if (!dinode && rgrp_contains_block(rgd, ip->i_goal))
+ goal = ip->i_goal - rgd->rd_data0;
+ else
+ goal = rgd->rd_last_alloc;
+
+ blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi);
+
+ /* Since all blocks are reserved in advance, this shouldn't happen */
+ if (blk == BFITNOENT) {
+ printk(KERN_WARNING "BFITNOENT, nblocks=%u\n", *nblocks);
+ printk(KERN_WARNING "FULL=%d\n",
+ test_bit(GBF_FULL, &rgd->rd_bits->bi_flags));
+ goto rgrp_error;
+ }
+
+ block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks);
+found_blocks:
ndata = *nblocks;
if (dinode)
ndata--;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 75d6d0a..6a7fcab 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -287,10 +287,12 @@
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index c6e895f..9b47610 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -154,7 +154,7 @@
nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
nfsi->attrtimeo_timestamp = jiffies;
- memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
+ memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf));
if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
else
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index d6b3b5f..6932209 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -643,7 +643,7 @@
u64 cookie, struct page **pages, unsigned int count, int plus)
{
struct inode *dir = dentry->d_inode;
- __be32 *verf = NFS_COOKIEVERF(dir);
+ __be32 *verf = NFS_I(dir)->cookieverf;
struct nfs3_readdirargs arg = {
.fh = NFS_FH(dir),
.cookie = cookie,
diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index acb65e7..eb5eb8e 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -96,13 +96,15 @@
struct inode *inode = file->f_path.dentry->d_inode;
ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
+ if (ret != 0)
+ goto out;
mutex_lock(&inode->i_mutex);
ret = nfs_file_fsync_commit(file, start, end, datasync);
if (!ret && !datasync)
/* application has asked for meta-data sync */
ret = pnfs_layoutcommit_inode(inode, true);
mutex_unlock(&inode->i_mutex);
-
+out:
return ret;
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 6352741..1e50326 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3215,11 +3215,11 @@
dentry->d_parent->d_name.name,
dentry->d_name.name,
(unsigned long long)cookie);
- nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
+ nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
res.pgbase = args.pgbase;
status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
if (status >= 0) {
- memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+ memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
status += args.pgbase;
}
@@ -3653,11 +3653,11 @@
&& (server->acl_bitmask & ACL4_SUPPORT_DENY_ACL);
}
-/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_CACHE_SIZE, and that
- * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_CACHE_SIZE) bytes on
+/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_SIZE, and that
+ * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_SIZE) bytes on
* the stack.
*/
-#define NFS4ACL_MAXPAGES (XATTR_SIZE_MAX >> PAGE_CACHE_SHIFT)
+#define NFS4ACL_MAXPAGES DIV_ROUND_UP(XATTR_SIZE_MAX, PAGE_SIZE)
static int buf_to_pages_noslab(const void *buf, size_t buflen,
struct page **pages, unsigned int *pgbase)
@@ -3668,7 +3668,7 @@
spages = pages;
do {
- len = min_t(size_t, PAGE_CACHE_SIZE, buflen);
+ len = min_t(size_t, PAGE_SIZE, buflen);
newpage = alloc_page(GFP_KERNEL);
if (newpage == NULL)
@@ -3739,7 +3739,7 @@
struct nfs4_cached_acl *acl;
size_t buflen = sizeof(*acl) + acl_len;
- if (pages && buflen <= PAGE_SIZE) {
+ if (buflen <= PAGE_SIZE) {
acl = kmalloc(buflen, GFP_KERNEL);
if (acl == NULL)
goto out;
@@ -3782,17 +3782,15 @@
.rpc_argp = &args,
.rpc_resp = &res,
};
- int ret = -ENOMEM, npages, i;
- size_t acl_len = 0;
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
+ int ret = -ENOMEM, i;
- npages = (buflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
/* As long as we're doing a round trip to the server anyway,
* let's be prepared for a page of acl data. */
if (npages == 0)
npages = 1;
-
- /* Add an extra page to handle the bitmap returned */
- npages++;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
for (i = 0; i < npages; i++) {
pages[i] = alloc_page(GFP_KERNEL);
@@ -3808,11 +3806,6 @@
args.acl_len = npages * PAGE_SIZE;
args.acl_pgbase = 0;
- /* Let decode_getfacl know not to fail if the ACL data is larger than
- * the page we send as a guess */
- if (buf == NULL)
- res.acl_flags |= NFS4_ACL_LEN_REQUEST;
-
dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n",
__func__, buf, buflen, npages, args.acl_len);
ret = nfs4_call_sync(NFS_SERVER(inode)->client, NFS_SERVER(inode),
@@ -3820,20 +3813,19 @@
if (ret)
goto out_free;
- acl_len = res.acl_len;
- if (acl_len > args.acl_len)
- nfs4_write_cached_acl(inode, NULL, 0, acl_len);
- else
- nfs4_write_cached_acl(inode, pages, res.acl_data_offset,
- acl_len);
- if (buf) {
+ /* Handle the case where the passed-in buffer is too short */
+ if (res.acl_flags & NFS4_ACL_TRUNC) {
+ /* Did the user only issue a request for the acl length? */
+ if (buf == NULL)
+ goto out_ok;
ret = -ERANGE;
- if (acl_len > buflen)
- goto out_free;
- _copy_from_pages(buf, pages, res.acl_data_offset,
- acl_len);
+ goto out_free;
}
- ret = acl_len;
+ nfs4_write_cached_acl(inode, pages, res.acl_data_offset, res.acl_len);
+ if (buf)
+ _copy_from_pages(buf, pages, res.acl_data_offset, res.acl_len);
+out_ok:
+ ret = res.acl_len;
out_free:
for (i = 0; i < npages; i++)
if (pages[i])
@@ -3891,10 +3883,13 @@
.rpc_argp = &arg,
.rpc_resp = &res,
};
+ unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE);
int ret, i;
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ if (npages > ARRAY_SIZE(pages))
+ return -ERANGE;
i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
if (i < 0)
return i;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 1bfbd67..8dba6bd 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -5072,18 +5072,14 @@
* are stored with the acl data to handle the problem of
* variable length bitmaps.*/
res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset;
-
- /* We ignore &savep and don't do consistency checks on
- * the attr length. Let userspace figure it out.... */
res->acl_len = attrlen;
- if (attrlen > (xdr->nwords << 2)) {
- if (res->acl_flags & NFS4_ACL_LEN_REQUEST) {
- /* getxattr interface called with a NULL buf */
- goto out;
- }
+
+ /* Check for receive buffer overflow */
+ if (res->acl_len > (xdr->nwords << 2) ||
+ res->acl_len + res->acl_data_offset > xdr->buf->page_len) {
+ res->acl_flags |= NFS4_ACL_TRUNC;
dprintk("NFS: acl reply: attrlen %u > page_len %u\n",
attrlen, xdr->nwords << 2);
- return -EINVAL;
}
} else
status = -EOPNOTSUPP;
@@ -6229,7 +6225,8 @@
status = decode_open(xdr, res);
if (status)
goto out;
- if (decode_getfh(xdr, &res->fh) != 0)
+ status = decode_getfh(xdr, &res->fh);
+ if (status)
goto out;
decode_getfattr(xdr, res->f_attr, res->server);
out:
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 239aff7..b8eda70 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1867,6 +1867,7 @@
memcpy(sap, &data->addr, sizeof(data->addr));
args->nfs_server.addrlen = sizeof(data->addr);
+ args->nfs_server.port = ntohs(data->addr.sin_port);
if (!nfs_verify_server_address(sap))
goto out_no_address;
@@ -2564,6 +2565,7 @@
return -EFAULT;
if (!nfs_verify_server_address(sap))
goto out_no_address;
+ args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port);
if (data->auth_flavourlen) {
if (data->auth_flavourlen > 1)
diff --git a/fs/stat.c b/fs/stat.c
index b6ff118..4078022 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -58,7 +58,7 @@
int vfs_fstat(unsigned int fd, struct kstat *stat)
{
int fput_needed;
- struct file *f = fget_light(fd, &fput_needed);
+ struct file *f = fget_raw_light(fd, &fput_needed);
int error = -EBADF;
if (f) {
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 7f3f7ba..d1c6093 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -39,20 +39,24 @@
#include "udf_i.h"
#include "udf_sb.h"
-static int udf_adinicb_readpage(struct file *file, struct page *page)
+static void __udf_adinicb_readpage(struct page *page)
{
struct inode *inode = page->mapping->host;
char *kaddr;
struct udf_inode_info *iinfo = UDF_I(inode);
- BUG_ON(!PageLocked(page));
-
kaddr = kmap(page);
- memset(kaddr, 0, PAGE_CACHE_SIZE);
memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
+ memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size);
flush_dcache_page(page);
SetPageUptodate(page);
kunmap(page);
+}
+
+static int udf_adinicb_readpage(struct file *file, struct page *page)
+{
+ BUG_ON(!PageLocked(page));
+ __udf_adinicb_readpage(page);
unlock_page(page);
return 0;
@@ -77,6 +81,25 @@
return 0;
}
+static int udf_adinicb_write_begin(struct file *file,
+ struct address_space *mapping, loff_t pos,
+ unsigned len, unsigned flags, struct page **pagep,
+ void **fsdata)
+{
+ struct page *page;
+
+ if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE))
+ return -EIO;
+ page = grab_cache_page_write_begin(mapping, 0, flags);
+ if (!page)
+ return -ENOMEM;
+ *pagep = page;
+
+ if (!PageUptodate(page) && len != PAGE_CACHE_SIZE)
+ __udf_adinicb_readpage(page);
+ return 0;
+}
+
static int udf_adinicb_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
@@ -98,8 +121,8 @@
const struct address_space_operations udf_adinicb_aops = {
.readpage = udf_adinicb_readpage,
.writepage = udf_adinicb_writepage,
- .write_begin = simple_write_begin,
- .write_end = udf_adinicb_write_end,
+ .write_begin = udf_adinicb_write_begin,
+ .write_end = udf_adinicb_write_end,
};
static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h
index bdf0152..f462118 100644
--- a/include/drm/drm_fourcc.h
+++ b/include/drm/drm_fourcc.h
@@ -107,8 +107,7 @@
#define DRM_FORMAT_NV16 fourcc_code('N', 'V', '1', '6') /* 2x1 subsampled Cr:Cb plane */
#define DRM_FORMAT_NV61 fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */
-/* 2 non contiguous plane YCbCr */
-#define DRM_FORMAT_NV12M fourcc_code('N', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane */
+/* special NV12 tiled format */
#define DRM_FORMAT_NV12MT fourcc_code('T', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane 64x32 macroblocks */
/*
@@ -131,7 +130,4 @@
#define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */
#define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */
-/* 3 non contiguous plane YCbCr */
-#define DRM_FORMAT_YUV420M fourcc_code('Y', 'M', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */
-
#endif /* DRM_FOURCC_H */
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
index 0602339..4eb3175 100644
--- a/include/linux/atmel-ssc.h
+++ b/include/linux/atmel-ssc.h
@@ -3,6 +3,7 @@
#include <linux/platform_device.h>
#include <linux/list.h>
+#include <linux/io.h>
struct ssc_device {
struct list_head list;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 77335fa..c127315 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -26,6 +26,7 @@
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */
#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
struct clk_hw;
@@ -360,6 +361,11 @@
void of_clk_del_provider(struct device_node *np);
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
void *data);
+struct clk_onecell_data {
+ struct clk **clks;
+ unsigned int clk_num;
+};
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
const char *of_clk_get_parent_name(struct device_node *np, int index);
void of_clk_init(const struct of_device_id *matches);
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index 1bc74af..49ed17f 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -22,6 +22,7 @@
struct timer_list timer; /* Timeout */
u8 * buf; /* Data buffer */
int len; /* Length of data buffer */
+ int order; /* RX Bytes to order via TX */
};
struct i2c_pnx_algo_data {
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index fc615a9..1e57449 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -224,7 +224,7 @@
static inline __printf(2, 3)
int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
+{ return -ENOMEM; }
static inline int kobject_action_type(const char *buf, size_t count,
enum kobject_action *type)
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
index d0752ec..9d96d5d 100644
--- a/include/linux/mISDNhw.h
+++ b/include/linux/mISDNhw.h
@@ -183,7 +183,7 @@
unsigned short);
extern int mISDN_freedchannel(struct dchannel *);
extern void mISDN_clear_bchannel(struct bchannel *);
-extern int mISDN_freebchannel(struct bchannel *);
+extern void mISDN_freebchannel(struct bchannel *);
extern int mISDN_ctrl_bchannel(struct bchannel *, struct mISDN_ctrl_req *);
extern void queue_ch_frame(struct mISDNchannel *, u_int,
int, struct sk_buff *);
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 3a8435a..cebe97e 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -16,6 +16,8 @@
#include <linux/platform_device.h>
+struct irq_domain;
+
/*
* This struct describes the MFD part ("cell").
* After registration the copy of this structure will become the platform data
@@ -98,7 +100,7 @@
extern int mfd_add_devices(struct device *parent, int id,
struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
- int irq_base);
+ int irq_base, struct irq_domain *irq_domain);
extern void mfd_remove_devices(struct device *parent);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 5b90e94..c410d99 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -136,6 +136,7 @@
PRCMU_TIMCLK,
PRCMU_PLLSOC0,
PRCMU_PLLSOC1,
+ PRCMU_ARMSS,
PRCMU_PLLDDR,
PRCMU_PLLDSI,
PRCMU_DSI0CLK,
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
index 12c0687..7cd83d8 100644
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -22,6 +22,9 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+/* TPS chip id list */
+#define TPS65217 0xF0
+
/* I2C ID for TPS65217 part */
#define TPS65217_I2C_ID 0x24
@@ -248,13 +251,11 @@
struct tps65217 {
struct device *dev;
struct tps65217_board *pdata;
+ unsigned int id;
struct regulator_desc desc[TPS65217_NUM_REGULATOR];
struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
struct tps_info *info[TPS65217_NUM_REGULATOR];
struct regmap *regmap;
-
- /* Client devices */
- struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
};
static inline struct tps65217 *dev_to_tps65217(struct device *dev)
@@ -262,6 +263,11 @@
return dev_get_drvdata(dev);
}
+static inline int tps65217_chip_id(struct tps65217 *tps65217)
+{
+ return tps65217->id;
+}
+
int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
unsigned int *val);
int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index f350fd0..9451471 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -14,6 +14,7 @@
#define TPS6586X_SLEW_RATE_MASK 0x07
enum {
+ TPS6586X_ID_SYS,
TPS6586X_ID_SM_0,
TPS6586X_ID_SM_1,
TPS6586X_ID_SM_2,
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index bd6c9fc..6e1b0f9 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -796,6 +796,19 @@
MLX4_NET_TRANS_RULE_NUM, /* should be last */
};
+extern const u16 __sw_id_hw[];
+
+static inline int map_hw_to_sw_id(u16 header_id)
+{
+
+ int i;
+ for (i = 0; i < MLX4_NET_TRANS_RULE_NUM; i++) {
+ if (header_id == __sw_id_hw[i])
+ return i;
+ }
+ return -EINVAL;
+}
+
enum mlx4_net_trans_promisc_mode {
MLX4_FS_PROMISC_NONE = 0,
MLX4_FS_PROMISC_UPLINK,
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 1f8fc7f..4b03f56 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -265,11 +265,6 @@
return NFS_SERVER(inode)->nfs_client->rpc_ops;
}
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
- return NFS_I(inode)->cookieverf;
-}
-
static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
{
struct nfs_server *nfss = NFS_SERVER(inode);
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index ac7c8ae..be9cf3c 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -652,7 +652,7 @@
};
/* getxattr ACL interface flags */
-#define NFS4_ACL_LEN_REQUEST 0x0001 /* zero length getxattr buffer */
+#define NFS4_ACL_TRUNC 0x0001 /* ACL was truncated */
struct nfs_getaclres {
size_t acl_len;
size_t acl_data_offset;
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 7602ccb..33ed9d6 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -926,7 +926,7 @@
struct hw_perf_event hw;
struct perf_event_context *ctx;
- struct file *filp;
+ atomic_long_t refcount;
/*
* These accumulate total time (in nanoseconds) that children
@@ -1296,6 +1296,7 @@
extern void perf_swevent_put_recursion_context(int rctx);
extern void perf_event_enable(struct perf_event *event);
extern void perf_event_disable(struct perf_event *event);
+extern int __perf_event_disable(void *info);
extern void perf_event_task_tick(void);
#else
static inline void
@@ -1334,6 +1335,7 @@
static inline void perf_swevent_put_recursion_context(int rctx) { }
static inline void perf_event_enable(struct perf_event *event) { }
static inline void perf_event_disable(struct perf_event *event) { }
+static inline int __perf_event_disable(void *info) { return -1; }
static inline void perf_event_task_tick(void) { }
#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/mcbsp.h
rename to include/linux/platform_data/asoc-ti-mcbsp.h
diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h
new file mode 100644
index 0000000..2e426a7
--- /dev/null
+++ b/include/linux/platform_data/clk-realview.h
@@ -0,0 +1 @@
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
new file mode 100644
index 0000000..3af0da1
--- /dev/null
+++ b/include/linux/platform_data/clk-ux500.h
@@ -0,0 +1,17 @@
+/*
+ * Clock definitions for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __CLK_UX500_H
+#define __CLK_UX500_H
+
+void u8500_clk_init(void);
+void u9540_clk_init(void);
+void u8540_clk_init(void);
+
+#endif /* __CLK_UX500_H */
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/include/linux/platform_data/dsp-omap.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/dsp.h
rename to include/linux/platform_data/dsp-omap.h
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/include/linux/platform_data/keypad-omap.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/keypad.h
rename to include/linux/platform_data/keypad-omap.h
diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/include/linux/platform_data/lcd-mipid.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/lcd_mipid.h
rename to include/linux/platform_data/lcd-mipid.h
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/include/linux/platform_data/mtd-nand-omap2.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/nand.h
rename to include/linux/platform_data/mtd-nand-omap2.h
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/include/linux/platform_data/mtd-onenand-omap2.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/onenand.h
rename to include/linux/platform_data/mtd-onenand-omap2.h
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/include/linux/platform_data/pinctrl-coh901.h
similarity index 71%
rename from arch/arm/mach-u300/include/mach/gpio-u300.h
rename to include/linux/platform_data/pinctrl-coh901.h
index e81400c..30dea25 100644
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ b/include/linux/platform_data/pinctrl-coh901.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007-2011 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* GPIO block resgister definitions and inline macros for
* U300 GPIO COH 901 335 or COH 901 571/3
@@ -10,24 +10,13 @@
#define __MACH_U300_GPIO_U300_H
/**
- * enum u300_gpio_variant - the type of U300 GPIO employed
- */
-enum u300_gpio_variant {
- U300_GPIO_COH901335,
- U300_GPIO_COH901571_3_BS335,
- U300_GPIO_COH901571_3_BS365,
-};
-
-/**
* struct u300_gpio_platform - U300 GPIO platform data
- * @variant: IP block variant
* @ports: number of GPIO block ports
* @gpio_base: first GPIO number for this block (use a free range)
* @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
* @pinctrl_device: pin control device to spawn as child
*/
struct u300_gpio_platform {
- enum u300_gpio_variant variant;
u8 ports;
int gpio_base;
int gpio_irq_base;
diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/include/linux/platform_data/remoteproc-omap.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/remoteproc.h
rename to include/linux/platform_data/remoteproc-omap.h
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/mcspi.h
rename to include/linux/platform_data/spi-omap2-mcspi.h
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/include/linux/platform_data/voltage-omap.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/voltage.h
rename to include/linux/platform_data/voltage-omap.h
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 3101e62..4a496eb 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -23,7 +23,7 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b8c8664..23bddac 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -954,7 +954,6 @@
unsigned int smt_gain;
int flags; /* See SD_* */
int level;
- int idle_buddy; /* cpu assigned to select_idle_sibling() */
/* Runtime fields. */
unsigned long last_balance; /* init to jiffies. units in jiffies */
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index cff40aa..bf8c49f 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -114,6 +114,7 @@
void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
int (*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+ void (*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task);
void (*rpcbind)(struct rpc_task *task);
void (*set_port)(struct rpc_xprt *xprt, unsigned short port);
void (*connect)(struct rpc_task *task);
@@ -281,6 +282,8 @@
void xprt_reserve(struct rpc_task *task);
int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
int xprt_prepare_transmit(struct rpc_task *task);
void xprt_transmit(struct rpc_task *task);
void xprt_end_transmit(struct rpc_task *task);
diff --git a/include/net/bluetooth/smp.h b/include/net/bluetooth/smp.h
index ca356a7..8b27927 100644
--- a/include/net/bluetooth/smp.h
+++ b/include/net/bluetooth/smp.h
@@ -136,7 +136,7 @@
};
/* SMP Commands */
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
int smp_user_confirm_reply(struct hci_conn *conn, u16 mgmt_op, __le32 passkey);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 976a81a..639dd13 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -273,6 +273,9 @@
int (*check)(struct xfrm_state *x,
struct sk_buff *skb,
__be32 net_seq);
+ int (*recheck)(struct xfrm_state *x,
+ struct sk_buff *skb,
+ __be32 net_seq);
void (*notify)(struct xfrm_state *x, int event);
int (*overflow)(struct xfrm_state *x, struct sk_buff *skb);
};
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index f1405d33..941c84bf 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -23,7 +23,9 @@
struct se_device *(*create_virtdevice)(struct se_hba *,
struct se_subsystem_dev *, void *);
void (*free_device)(void *);
- int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *);
+ void (*transport_complete)(struct se_cmd *cmd,
+ struct scatterlist *,
+ unsigned char *);
int (*parse_cdb)(struct se_cmd *cmd);
ssize_t (*check_configfs_dev_params)(struct se_hba *,
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 015cea0..5be8937 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -121,6 +121,7 @@
#define SE_INQUIRY_BUF 512
#define SE_MODE_PAGE_BUF 512
+#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
diff --git a/kernel/events/core.c b/kernel/events/core.c
index b7935fc..7fee567 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1253,7 +1253,7 @@
/*
* Cross CPU call to disable a performance event
*/
-static int __perf_event_disable(void *info)
+int __perf_event_disable(void *info)
{
struct perf_event *event = info;
struct perf_event_context *ctx = event->ctx;
@@ -2935,12 +2935,12 @@
/*
* Called when the last reference to the file is gone.
*/
-static int perf_release(struct inode *inode, struct file *file)
+static void put_event(struct perf_event *event)
{
- struct perf_event *event = file->private_data;
struct task_struct *owner;
- file->private_data = NULL;
+ if (!atomic_long_dec_and_test(&event->refcount))
+ return;
rcu_read_lock();
owner = ACCESS_ONCE(event->owner);
@@ -2975,7 +2975,13 @@
put_task_struct(owner);
}
- return perf_event_release_kernel(event);
+ perf_event_release_kernel(event);
+}
+
+static int perf_release(struct inode *inode, struct file *file)
+{
+ put_event(file->private_data);
+ return 0;
}
u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
@@ -3227,7 +3233,7 @@
static const struct file_operations perf_fops;
-static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+static struct file *perf_fget_light(int fd, int *fput_needed)
{
struct file *file;
@@ -3241,7 +3247,7 @@
return ERR_PTR(-EBADF);
}
- return file->private_data;
+ return file;
}
static int perf_event_set_output(struct perf_event *event,
@@ -3273,19 +3279,21 @@
case PERF_EVENT_IOC_SET_OUTPUT:
{
+ struct file *output_file = NULL;
struct perf_event *output_event = NULL;
int fput_needed = 0;
int ret;
if (arg != -1) {
- output_event = perf_fget_light(arg, &fput_needed);
- if (IS_ERR(output_event))
- return PTR_ERR(output_event);
+ output_file = perf_fget_light(arg, &fput_needed);
+ if (IS_ERR(output_file))
+ return PTR_ERR(output_file);
+ output_event = output_file->private_data;
}
ret = perf_event_set_output(event, output_event);
if (output_event)
- fput_light(output_event->filp, fput_needed);
+ fput_light(output_file, fput_needed);
return ret;
}
@@ -5950,6 +5958,7 @@
mutex_init(&event->mmap_mutex);
+ atomic_long_set(&event->refcount, 1);
event->cpu = cpu;
event->attr = *attr;
event->group_leader = group_leader;
@@ -6260,12 +6269,12 @@
return event_fd;
if (group_fd != -1) {
- group_leader = perf_fget_light(group_fd, &fput_needed);
- if (IS_ERR(group_leader)) {
- err = PTR_ERR(group_leader);
+ group_file = perf_fget_light(group_fd, &fput_needed);
+ if (IS_ERR(group_file)) {
+ err = PTR_ERR(group_file);
goto err_fd;
}
- group_file = group_leader->filp;
+ group_leader = group_file->private_data;
if (flags & PERF_FLAG_FD_OUTPUT)
output_event = group_leader;
if (flags & PERF_FLAG_FD_NO_GROUP)
@@ -6402,7 +6411,6 @@
put_ctx(gctx);
}
- event->filp = event_file;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
@@ -6496,7 +6504,6 @@
goto err_free;
}
- event->filp = NULL;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
perf_install_in_context(ctx, event, cpu);
@@ -6578,7 +6585,7 @@
* Release the parent event, if this was the last
* reference to it.
*/
- fput(parent_event->filp);
+ put_event(parent_event);
}
static void
@@ -6654,9 +6661,8 @@
*
* __perf_event_exit_task()
* sync_child_event()
- * fput(parent_event->filp)
- * perf_release()
- * mutex_lock(&ctx->mutex)
+ * put_event()
+ * mutex_lock(&ctx->mutex)
*
* But since its the parent context it won't be the same instance.
*/
@@ -6724,7 +6730,7 @@
list_del_init(&event->child_list);
mutex_unlock(&parent->child_mutex);
- fput(parent->filp);
+ put_event(parent);
perf_group_detach(event);
list_del_event(event, ctx);
@@ -6804,6 +6810,12 @@
NULL, NULL);
if (IS_ERR(child_event))
return child_event;
+
+ if (!atomic_long_inc_not_zero(&parent_event->refcount)) {
+ free_event(child_event);
+ return NULL;
+ }
+
get_ctx(child_ctx);
/*
@@ -6845,14 +6857,6 @@
raw_spin_unlock_irqrestore(&child_ctx->lock, flags);
/*
- * Get a reference to the parent filp - we will fput it
- * when the child event exits. This is safe to do because
- * we are in the parent and we know that the filp still
- * exists and has a nonzero count:
- */
- atomic_long_inc(&parent_event->filp->f_count);
-
- /*
* Link this into the parent event's child list
*/
WARN_ON_ONCE(parent_event->ctx->parent_ctx);
diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index bb38c4d..9a7b487 100644
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -453,7 +453,16 @@
int old_type = bp->attr.bp_type;
int err = 0;
- perf_event_disable(bp);
+ /*
+ * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it
+ * will not be possible to raise IPIs that invoke __perf_event_disable.
+ * So call the function directly after making sure we are targeting the
+ * current task.
+ */
+ if (irqs_disabled() && bp->ctx && bp->ctx->task == current)
+ __perf_event_disable(bp);
+ else
+ perf_event_disable(bp);
bp->attr.bp_addr = attr->bp_addr;
bp->attr.bp_type = attr->bp_type;
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index fbf1fd0..649c9f8 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5304,27 +5304,17 @@
}
/*
- * While a dead CPU has no uninterruptible tasks queued at this point,
- * it might still have a nonzero ->nr_uninterruptible counter, because
- * for performance reasons the counter is not stricly tracking tasks to
- * their home CPUs. So we just add the counter to another CPU's counter,
- * to keep the global sum constant after CPU-down:
+ * Since this CPU is going 'away' for a while, fold any nr_active delta
+ * we might have. Assumes we're called after migrate_tasks() so that the
+ * nr_active count is stable.
+ *
+ * Also see the comment "Global load-average calculations".
*/
-static void migrate_nr_uninterruptible(struct rq *rq_src)
+static void calc_load_migrate(struct rq *rq)
{
- struct rq *rq_dest = cpu_rq(cpumask_any(cpu_active_mask));
-
- rq_dest->nr_uninterruptible += rq_src->nr_uninterruptible;
- rq_src->nr_uninterruptible = 0;
-}
-
-/*
- * remove the tasks which were accounted by rq from calc_load_tasks.
- */
-static void calc_global_load_remove(struct rq *rq)
-{
- atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
- rq->calc_load_active = 0;
+ long delta = calc_load_fold_active(rq);
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
}
/*
@@ -5352,9 +5342,6 @@
*/
rq->stop = NULL;
- /* Ensure any throttled groups are reachable by pick_next_task */
- unthrottle_offline_cfs_rqs(rq);
-
for ( ; ; ) {
/*
* There's this thread running, bail when that's the only
@@ -5618,8 +5605,7 @@
BUG_ON(rq->nr_running != 1); /* the migration thread */
raw_spin_unlock_irqrestore(&rq->lock, flags);
- migrate_nr_uninterruptible(rq);
- calc_global_load_remove(rq);
+ calc_load_migrate(rq);
break;
#endif
}
@@ -6028,11 +6014,6 @@
* SD_SHARE_PKG_RESOURCE set (Last Level Cache Domain) for this
* allows us to avoid some pointer chasing select_idle_sibling().
*
- * Iterate domains and sched_groups downward, assigning CPUs to be
- * select_idle_sibling() hw buddy. Cross-wiring hw makes bouncing
- * due to random perturbation self canceling, ie sw buddies pull
- * their counterpart to their CPU's hw counterpart.
- *
* Also keep a unique ID per domain (we use the first cpu number in
* the cpumask of the domain), this allows us to quickly tell if
* two cpus are in the same cache domain, see cpus_share_cache().
@@ -6046,40 +6027,8 @@
int id = cpu;
sd = highest_flag_domain(cpu, SD_SHARE_PKG_RESOURCES);
- if (sd) {
- struct sched_domain *tmp = sd;
- struct sched_group *sg, *prev;
- bool right;
-
- /*
- * Traverse to first CPU in group, and count hops
- * to cpu from there, switching direction on each
- * hop, never ever pointing the last CPU rightward.
- */
- do {
- id = cpumask_first(sched_domain_span(tmp));
- prev = sg = tmp->groups;
- right = 1;
-
- while (cpumask_first(sched_group_cpus(sg)) != id)
- sg = sg->next;
-
- while (!cpumask_test_cpu(cpu, sched_group_cpus(sg))) {
- prev = sg;
- sg = sg->next;
- right = !right;
- }
-
- /* A CPU went down, never point back to domain start. */
- if (right && cpumask_first(sched_group_cpus(sg->next)) == id)
- right = false;
-
- sg = right ? sg->next : prev;
- tmp->idle_buddy = cpumask_first(sched_group_cpus(sg));
- } while ((tmp = tmp->child));
-
+ if (sd)
id = cpumask_first(sched_domain_span(sd));
- }
rcu_assign_pointer(per_cpu(sd_llc, cpu), sd);
per_cpu(sd_llc_id, cpu) = id;
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index c219bf8..96e2b18 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2052,7 +2052,7 @@
hrtimer_cancel(&cfs_b->slack_timer);
}
-void unthrottle_offline_cfs_rqs(struct rq *rq)
+static void unthrottle_offline_cfs_rqs(struct rq *rq)
{
struct cfs_rq *cfs_rq;
@@ -2106,7 +2106,7 @@
return NULL;
}
static inline void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) {}
-void unthrottle_offline_cfs_rqs(struct rq *rq) {}
+static inline void unthrottle_offline_cfs_rqs(struct rq *rq) {}
#endif /* CONFIG_CFS_BANDWIDTH */
@@ -2637,6 +2637,8 @@
int cpu = smp_processor_id();
int prev_cpu = task_cpu(p);
struct sched_domain *sd;
+ struct sched_group *sg;
+ int i;
/*
* If the task is going to be woken-up on this cpu and if it is
@@ -2653,17 +2655,29 @@
return prev_cpu;
/*
- * Otherwise, check assigned siblings to find an elegible idle cpu.
+ * Otherwise, iterate the domains and find an elegible idle cpu.
*/
sd = rcu_dereference(per_cpu(sd_llc, target));
-
for_each_lower_domain(sd) {
- if (!cpumask_test_cpu(sd->idle_buddy, tsk_cpus_allowed(p)))
- continue;
- if (idle_cpu(sd->idle_buddy))
- return sd->idle_buddy;
- }
+ sg = sd->groups;
+ do {
+ if (!cpumask_intersects(sched_group_cpus(sg),
+ tsk_cpus_allowed(p)))
+ goto next;
+ for_each_cpu(i, sched_group_cpus(sg)) {
+ if (!idle_cpu(i))
+ goto next;
+ }
+
+ target = cpumask_first_and(sched_group_cpus(sg),
+ tsk_cpus_allowed(p));
+ goto done;
+next:
+ sg = sg->next;
+ } while (sg != sd->groups);
+ }
+done:
return target;
}
@@ -3658,7 +3672,6 @@
* @group: sched_group whose statistics are to be updated.
* @load_idx: Load index of sched_domain of this_cpu for load calc.
* @local_group: Does group contain this_cpu.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sgs: variable to hold the statistics for this group.
*/
@@ -3805,7 +3818,6 @@
/**
* update_sd_lb_stats - Update sched_domain's statistics for load balancing.
* @env: The load balancing environment.
- * @cpus: Set of cpus considered for load balancing.
* @balance: Should we balance.
* @sds: variable to hold the statistics for this sched_domain.
*/
@@ -4956,6 +4968,9 @@
static void rq_offline_fair(struct rq *rq)
{
update_sysctl();
+
+ /* Ensure any throttled groups are reachable by pick_next_task */
+ unthrottle_offline_cfs_rqs(rq);
}
#endif /* CONFIG_SMP */
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 944cb68..e0b7ba9 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -691,6 +691,7 @@
* runtime - in which case borrowing doesn't make sense.
*/
rt_rq->rt_runtime = RUNTIME_INF;
+ rt_rq->rt_throttled = 0;
raw_spin_unlock(&rt_rq->rt_runtime_lock);
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index f6714d0..0848fa3 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1144,7 +1144,6 @@
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
-extern void unthrottle_offline_cfs_rqs(struct rq *rq);
extern void account_cfs_bandwidth_used(int enabled, int was_enabled);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 024540f..3a9e5d5 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -573,6 +573,7 @@
tick_do_update_jiffies64(now);
update_cpu_load_nohz();
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 692d976..1e1373b 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -66,6 +66,7 @@
/* pool flags */
POOL_MANAGE_WORKERS = 1 << 0, /* need to manage workers */
+ POOL_MANAGING_WORKERS = 1 << 1, /* managing workers */
/* worker flags */
WORKER_STARTED = 1 << 0, /* started */
@@ -652,7 +653,7 @@
/* Do we have too many workers and should some go away? */
static bool too_many_workers(struct worker_pool *pool)
{
- bool managing = mutex_is_locked(&pool->manager_mutex);
+ bool managing = pool->flags & POOL_MANAGING_WORKERS;
int nr_idle = pool->nr_idle + managing; /* manager is considered idle */
int nr_busy = pool->nr_workers - nr_idle;
@@ -1326,6 +1327,15 @@
/* we did our part, wait for rebind_workers() to finish up */
wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND));
+
+ /*
+ * rebind_workers() shouldn't finish until all workers passed the
+ * above WORKER_REBIND wait. Tell it when done.
+ */
+ spin_lock_irq(&worker->pool->gcwq->lock);
+ if (!--worker->idle_rebind->cnt)
+ complete(&worker->idle_rebind->done);
+ spin_unlock_irq(&worker->pool->gcwq->lock);
}
/*
@@ -1396,12 +1406,15 @@
/* set REBIND and kick idle ones, we'll wait for these later */
for_each_worker_pool(pool, gcwq) {
list_for_each_entry(worker, &pool->idle_list, entry) {
+ unsigned long worker_flags = worker->flags;
+
if (worker->flags & WORKER_REBIND)
continue;
- /* morph UNBOUND to REBIND */
- worker->flags &= ~WORKER_UNBOUND;
- worker->flags |= WORKER_REBIND;
+ /* morph UNBOUND to REBIND atomically */
+ worker_flags &= ~WORKER_UNBOUND;
+ worker_flags |= WORKER_REBIND;
+ ACCESS_ONCE(worker->flags) = worker_flags;
idle_rebind.cnt++;
worker->idle_rebind = &idle_rebind;
@@ -1419,25 +1432,15 @@
goto retry;
}
- /*
- * All idle workers are rebound and waiting for %WORKER_REBIND to
- * be cleared inside idle_worker_rebind(). Clear and release.
- * Clearing %WORKER_REBIND from this foreign context is safe
- * because these workers are still guaranteed to be idle.
- */
- for_each_worker_pool(pool, gcwq)
- list_for_each_entry(worker, &pool->idle_list, entry)
- worker->flags &= ~WORKER_REBIND;
-
- wake_up_all(&gcwq->rebind_hold);
-
- /* rebind busy workers */
+ /* all idle workers are rebound, rebind busy workers */
for_each_busy_worker(worker, i, pos, gcwq) {
struct work_struct *rebind_work = &worker->rebind_work;
+ unsigned long worker_flags = worker->flags;
- /* morph UNBOUND to REBIND */
- worker->flags &= ~WORKER_UNBOUND;
- worker->flags |= WORKER_REBIND;
+ /* morph UNBOUND to REBIND atomically */
+ worker_flags &= ~WORKER_UNBOUND;
+ worker_flags |= WORKER_REBIND;
+ ACCESS_ONCE(worker->flags) = worker_flags;
if (test_and_set_bit(WORK_STRUCT_PENDING_BIT,
work_data_bits(rebind_work)))
@@ -1449,6 +1452,34 @@
worker->scheduled.next,
work_color_to_flags(WORK_NO_COLOR));
}
+
+ /*
+ * All idle workers are rebound and waiting for %WORKER_REBIND to
+ * be cleared inside idle_worker_rebind(). Clear and release.
+ * Clearing %WORKER_REBIND from this foreign context is safe
+ * because these workers are still guaranteed to be idle.
+ *
+ * We need to make sure all idle workers passed WORKER_REBIND wait
+ * in idle_worker_rebind() before returning; otherwise, workers can
+ * get stuck at the wait if hotplug cycle repeats.
+ */
+ idle_rebind.cnt = 1;
+ INIT_COMPLETION(idle_rebind.done);
+
+ for_each_worker_pool(pool, gcwq) {
+ list_for_each_entry(worker, &pool->idle_list, entry) {
+ worker->flags &= ~WORKER_REBIND;
+ idle_rebind.cnt++;
+ }
+ }
+
+ wake_up_all(&gcwq->rebind_hold);
+
+ if (--idle_rebind.cnt) {
+ spin_unlock_irq(&gcwq->lock);
+ wait_for_completion(&idle_rebind.done);
+ spin_lock_irq(&gcwq->lock);
+ }
}
static struct worker *alloc_worker(void)
@@ -1794,9 +1825,45 @@
struct worker_pool *pool = worker->pool;
bool ret = false;
- if (!mutex_trylock(&pool->manager_mutex))
+ if (pool->flags & POOL_MANAGING_WORKERS)
return ret;
+ pool->flags |= POOL_MANAGING_WORKERS;
+
+ /*
+ * To simplify both worker management and CPU hotplug, hold off
+ * management while hotplug is in progress. CPU hotplug path can't
+ * grab %POOL_MANAGING_WORKERS to achieve this because that can
+ * lead to idle worker depletion (all become busy thinking someone
+ * else is managing) which in turn can result in deadlock under
+ * extreme circumstances. Use @pool->manager_mutex to synchronize
+ * manager against CPU hotplug.
+ *
+ * manager_mutex would always be free unless CPU hotplug is in
+ * progress. trylock first without dropping @gcwq->lock.
+ */
+ if (unlikely(!mutex_trylock(&pool->manager_mutex))) {
+ spin_unlock_irq(&pool->gcwq->lock);
+ mutex_lock(&pool->manager_mutex);
+ /*
+ * CPU hotplug could have happened while we were waiting
+ * for manager_mutex. Hotplug itself can't handle us
+ * because manager isn't either on idle or busy list, and
+ * @gcwq's state and ours could have deviated.
+ *
+ * As hotplug is now excluded via manager_mutex, we can
+ * simply try to bind. It will succeed or fail depending
+ * on @gcwq's current state. Try it and adjust
+ * %WORKER_UNBOUND accordingly.
+ */
+ if (worker_maybe_bind_and_lock(worker))
+ worker->flags &= ~WORKER_UNBOUND;
+ else
+ worker->flags |= WORKER_UNBOUND;
+
+ ret = true;
+ }
+
pool->flags &= ~POOL_MANAGE_WORKERS;
/*
@@ -1806,6 +1873,7 @@
ret |= maybe_destroy_workers(pool);
ret |= maybe_create_worker(pool);
+ pool->flags &= ~POOL_MANAGING_WORKERS;
mutex_unlock(&pool->manager_mutex);
return ret;
}
diff --git a/lib/digsig.c b/lib/digsig.c
index 286d558..8c0e629 100644
--- a/lib/digsig.c
+++ b/lib/digsig.c
@@ -163,9 +163,11 @@
memcpy(out1 + head, p, l);
err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len);
+ if (err)
+ goto err;
- if (!err && len == hlen)
- err = memcmp(out2, h, hlen);
+ if (len != hlen || memcmp(out2, h, hlen))
+ err = -EINVAL;
err:
mpi_free(in);
diff --git a/mm/memblock.c b/mm/memblock.c
index 4d9393c..82aa349 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -246,7 +246,7 @@
min(new_area_start, memblock.current_limit),
new_alloc_size, PAGE_SIZE);
- new_array = addr ? __va(addr) : 0;
+ new_array = addr ? __va(addr) : NULL;
}
if (!addr) {
pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 5ad7da2..3c094e7 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -29,6 +29,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/a2mp.h>
+#include <net/bluetooth/smp.h>
static void hci_le_connect(struct hci_conn *conn)
{
@@ -619,6 +620,9 @@
{
BT_DBG("hcon %p", conn);
+ if (conn->type == LE_LINK)
+ return smp_conn_security(conn, sec_level);
+
/* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index daa149b..4ea1710 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1199,14 +1199,15 @@
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
+ struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
- if (!conn->hcon->out && conn->hcon->type == LE_LINK)
+ if (!hcon->out && hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- if (conn->hcon->out && conn->hcon->type == LE_LINK)
- smp_conn_security(conn, conn->hcon->pending_sec_level);
+ if (hcon->out && hcon->type == LE_LINK)
+ smp_conn_security(hcon, hcon->pending_sec_level);
mutex_lock(&conn->chan_lock);
@@ -1219,8 +1220,8 @@
continue;
}
- if (conn->hcon->type == LE_LINK) {
- if (smp_conn_security(conn, chan->sec_level))
+ if (hcon->type == LE_LINK) {
+ if (smp_conn_security(hcon, chan->sec_level))
l2cap_chan_ready(chan);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 1497edd..34bbe1c 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -616,7 +616,7 @@
break;
}
- if (smp_conn_security(conn, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level))
break;
sk->sk_state = BT_CONFIG;
chan->state = BT_CONFIG;
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 901a616..8c225ef 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -267,10 +267,10 @@
mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
hcon->dst_type, reason);
- if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) {
- cancel_delayed_work_sync(&conn->security_timer);
+ cancel_delayed_work_sync(&conn->security_timer);
+
+ if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags))
smp_chan_destroy(conn);
- }
}
#define JUST_WORKS 0x00
@@ -760,9 +760,9 @@
return 0;
}
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
{
- struct hci_conn *hcon = conn->hcon;
+ struct l2cap_conn *conn = hcon->l2cap_data;
struct smp_chan *smp = conn->smp_chan;
__u8 authreq;
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index f88ee53..92de5e5 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -80,7 +80,7 @@
unsigned int bitmask;
spin_lock_bh(&ebt_log_lock);
- printk("<%c>%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
+ printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
'0' + loginfo->u.log.level, prefix,
in ? in->name : "", out ? out->name : "",
eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
diff --git a/net/caif/cfsrvl.c b/net/caif/cfsrvl.c
index dd485f6..ba217e9 100644
--- a/net/caif/cfsrvl.c
+++ b/net/caif/cfsrvl.c
@@ -211,9 +211,10 @@
void (*put)(struct cflayer *lyr))
{
struct cfsrvl *service;
- service = container_of(adapt_layer->dn, struct cfsrvl, layer);
- WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL);
+ if (WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL))
+ return;
+ service = container_of(adapt_layer->dn, struct cfsrvl, layer);
service->hold = hold;
service->put = put;
}
diff --git a/net/core/dev.c b/net/core/dev.c
index 8398836..d7fe32c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2647,15 +2647,16 @@
if (!skb_flow_dissect(skb, &keys))
return;
- if (keys.ports) {
- if ((__force u16)keys.port16[1] < (__force u16)keys.port16[0])
- swap(keys.port16[0], keys.port16[1]);
+ if (keys.ports)
skb->l4_rxhash = 1;
- }
/* get a consistent hash (same value on both flow directions) */
- if ((__force u32)keys.dst < (__force u32)keys.src)
+ if (((__force u32)keys.dst < (__force u32)keys.src) ||
+ (((__force u32)keys.dst == (__force u32)keys.src) &&
+ ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) {
swap(keys.dst, keys.src);
+ swap(keys.port16[0], keys.port16[1]);
+ }
hash = jhash_3words((__force u32)keys.dst,
(__force u32)keys.src,
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index cce9e53..148e73d 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2721,7 +2721,7 @@
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 -
pkt_dev->pkt_overhead;
- if (datalen < sizeof(struct pktgen_hdr))
+ if (datalen < 0 || datalen < sizeof(struct pktgen_hdr))
datalen = sizeof(struct pktgen_hdr);
udph->source = htons(pkt_dev->cur_udp_src);
diff --git a/net/core/sock.c b/net/core/sock.c
index 8f67ced..3057920 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1523,7 +1523,14 @@
void sock_edemux(struct sk_buff *skb)
{
- sock_put(skb->sk);
+ struct sock *sk = skb->sk;
+
+#ifdef CONFIG_INET
+ if (sk->sk_state == TCP_TIME_WAIT)
+ inet_twsk_put(inet_twsk(sk));
+ else
+#endif
+ sock_put(sk);
}
EXPORT_SYMBOL(sock_edemux);
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 6f6d1ac..2814f66 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1226,6 +1226,11 @@
if (unlikely(err)) {
trace_kfree_skb(skb, udp_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS, is_udplite);
+ }
goto out_free;
}
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index a3e60cc..acd32e3 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -403,8 +403,9 @@
tp->mtu_info = ntohl(info);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
- else
- set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags);
+ else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
+ &tp->tsq_flags))
+ sock_hold(sk);
goto out;
}
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 99d0077..07e2bfe 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -394,6 +394,17 @@
}
if (unlikely(err)) {
trace_kfree_skb(skb, udpv6_recvmsg);
+ if (!peeked) {
+ atomic_inc(&sk->sk_drops);
+ if (is_udp4)
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_INERRORS,
+ is_udplite);
+ }
goto out_free;
}
if (!peeked) {
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 513cab0..1a9f372 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1501,6 +1501,8 @@
return err;
}
+static struct lock_class_key l2tp_socket_class;
+
int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp)
{
struct l2tp_tunnel *tunnel = NULL;
@@ -1605,6 +1607,8 @@
tunnel->old_sk_destruct = sk->sk_destruct;
sk->sk_destruct = &l2tp_tunnel_destruct;
tunnel->sock = sk;
+ lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock");
+
sk->sk_allocation = GFP_ATOMIC;
/* Add tunnel to our list */
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index f9ee74d..3bfb34a 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -153,7 +153,7 @@
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
- if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
+ if (!pskb_may_pull(skb, ETH_HLEN))
goto error;
secpath_reset(skb);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d41974a..a58c0b6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1378,6 +1378,8 @@
else
memset(next_hop, 0, ETH_ALEN);
+ memset(pinfo, 0, sizeof(*pinfo));
+
pinfo->generation = mesh_paths_generation;
pinfo->filled = MPATH_INFO_FRAME_QLEN |
@@ -1396,7 +1398,6 @@
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
- pinfo->flags = 0;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
@@ -1405,10 +1406,8 @@
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
- if (mpath->flags & MESH_PATH_RESOLVING)
- pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
-
- pinfo->flags = mpath->flags;
+ if (mpath->flags & MESH_PATH_RESOLVED)
+ pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a4a5acd..f76b833 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3248,6 +3248,8 @@
goto out_unlock;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->auth_data = NULL;
err_free:
kfree(auth_data);
@@ -3439,6 +3441,8 @@
err = 0;
goto out;
err_clear:
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
ifmgd->assoc_data = NULL;
err_free:
kfree(assoc_data);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index a5ac11e..e046b37 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -158,21 +158,18 @@
* sCL -> sSS
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
-/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
+/*synack*/ { sIV, sIV, sSR, sIV, sIV, sIV, sIV, sIV, sIV, sSR },
/*
* sNO -> sIV Too late and no reason to do anything
* sSS -> sIV Client can't send SYN and then SYN/ACK
* sS2 -> sSR SYN/ACK sent to SYN2 in simultaneous open
- * sSR -> sIG
- * sES -> sIG Error: SYNs in window outside the SYN_SENT state
- * are errors. Receiver will reply with RST
- * and close the connection.
- * Or we are not in sync and hold a dead connection.
- * sFW -> sIG
- * sCW -> sIG
- * sLA -> sIG
- * sTW -> sIG
- * sCL -> sIG
+ * sSR -> sSR Late retransmitted SYN/ACK in simultaneous open
+ * sES -> sIV Invalid SYN/ACK packets sent by the client
+ * sFW -> sIV
+ * sCW -> sIV
+ * sLA -> sIV
+ * sTW -> sIV
+ * sCL -> sIV
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
/*fin*/ { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
@@ -633,15 +630,9 @@
ack = sack = receiver->td_end;
}
- if (seq == end
- && (!tcph->rst
- || (seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)))
+ if (tcph->rst && seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT)
/*
- * Packets contains no data: we assume it is valid
- * and check the ack value only.
- * However RST segments are always validated by their
- * SEQ number, except when seq == 0 (reset sent answering
- * SYN.
+ * RST sent answering SYN.
*/
seq = end = sender->td_end;
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 14e2f39..5cfb5be 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -381,6 +381,7 @@
struct nlmsghdr *nlh;
struct nfgenmsg *nfmsg;
sk_buff_data_t old_tail = inst->skb->tail;
+ struct sock *sk;
nlh = nlmsg_put(inst->skb, 0, 0,
NFNL_SUBSYS_ULOG << 8 | NFULNL_MSG_PACKET,
@@ -499,18 +500,19 @@
}
/* UID */
- if (skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file) {
- struct file *file = skb->sk->sk_socket->file;
+ sk = skb->sk;
+ if (sk && sk->sk_state != TCP_TIME_WAIT) {
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file) {
+ struct file *file = sk->sk_socket->file;
__be32 uid = htonl(file->f_cred->fsuid);
__be32 gid = htonl(file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
if (nla_put_be32(inst->skb, NFULA_UID, uid) ||
nla_put_be32(inst->skb, NFULA_GID, gid))
goto nla_put_failure;
} else
- read_unlock_bh(&skb->sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/* local sequence number */
diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c
index ff5f75f..91e9af4 100644
--- a/net/netfilter/xt_LOG.c
+++ b/net/netfilter/xt_LOG.c
@@ -145,6 +145,19 @@
return 0;
}
+static void dump_sk_uid_gid(struct sbuff *m, struct sock *sk)
+{
+ if (!sk || sk->sk_state == TCP_TIME_WAIT)
+ return;
+
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_socket && sk->sk_socket->file)
+ sb_add(m, "UID=%u GID=%u ",
+ sk->sk_socket->file->f_cred->fsuid,
+ sk->sk_socket->file->f_cred->fsgid);
+ read_unlock_bh(&sk->sk_callback_lock);
+}
+
/* One level of recursion won't kill us */
static void dump_ipv4_packet(struct sbuff *m,
const struct nf_loginfo *info,
@@ -361,14 +374,8 @@
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && !iphoff && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && !iphoff)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!iphoff && skb->mark)
@@ -436,8 +443,8 @@
const struct nf_loginfo *loginfo,
const char *prefix)
{
- sb_add(m, "<%d>%sIN=%s OUT=%s ", loginfo->u.log.level,
- prefix,
+ sb_add(m, KERN_SOH "%c%sIN=%s OUT=%s ",
+ '0' + loginfo->u.log.level, prefix,
in ? in->name : "",
out ? out->name : "");
#ifdef CONFIG_BRIDGE_NETFILTER
@@ -717,14 +724,8 @@
}
/* Max length: 15 "UID=4294967295 " */
- if ((logflags & XT_LOG_UID) && recurse && skb->sk) {
- read_lock_bh(&skb->sk->sk_callback_lock);
- if (skb->sk->sk_socket && skb->sk->sk_socket->file)
- sb_add(m, "UID=%u GID=%u ",
- skb->sk->sk_socket->file->f_cred->fsuid,
- skb->sk->sk_socket->file->f_cred->fsgid);
- read_unlock_bh(&skb->sk->sk_callback_lock);
- }
+ if ((logflags & XT_LOG_UID) && recurse)
+ dump_sk_uid_gid(m, skb->sk);
/* Max length: 16 "MARK=0xFFFFFFFF " */
if (!recurse && skb->mark)
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 06592d8..1b9024e 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1169,7 +1169,12 @@
msg->msg_flags |= MSG_TRUNC;
}
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (er < 0) {
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+ return er;
+ }
if (sax != NULL) {
sax->sax25_family = AF_NETROM;
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index f3f96ba..954405c 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -45,7 +45,7 @@
return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
}
-/* remove VLAN header from packet and update csum accrodingly. */
+/* remove VLAN header from packet and update csum accordingly. */
static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
{
struct vlan_hdr *vhdr;
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index d8277d2..cf58ced 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -425,10 +425,10 @@
static int validate_tp_port(const struct sw_flow_key *flow_key)
{
if (flow_key->eth.type == htons(ETH_P_IP)) {
- if (flow_key->ipv4.tp.src && flow_key->ipv4.tp.dst)
+ if (flow_key->ipv4.tp.src || flow_key->ipv4.tp.dst)
return 0;
} else if (flow_key->eth.type == htons(ETH_P_IPV6)) {
- if (flow_key->ipv6.tp.src && flow_key->ipv6.tp.dst)
+ if (flow_key->ipv6.tp.src || flow_key->ipv6.tp.dst)
return 0;
}
@@ -460,7 +460,7 @@
if (flow_key->eth.type != htons(ETH_P_IP))
return -EINVAL;
- if (!flow_key->ipv4.addr.src || !flow_key->ipv4.addr.dst)
+ if (!flow_key->ip.proto)
return -EINVAL;
ipv4_key = nla_data(ovs_key);
diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h
index 9b75617..c30df1a 100644
--- a/net/openvswitch/flow.h
+++ b/net/openvswitch/flow.h
@@ -145,15 +145,17 @@
* OVS_KEY_ATTR_PRIORITY 4 -- 4 8
* OVS_KEY_ATTR_IN_PORT 4 -- 4 8
* OVS_KEY_ATTR_ETHERNET 12 -- 4 16
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (outer VLAN ethertype)
* OVS_KEY_ATTR_8021Q 4 -- 4 8
- * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8
+ * OVS_KEY_ATTR_ENCAP 0 -- 4 4 (VLAN encapsulation)
+ * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (inner VLAN ethertype)
* OVS_KEY_ATTR_IPV6 40 -- 4 44
* OVS_KEY_ATTR_ICMPV6 2 2 4 8
* OVS_KEY_ATTR_ND 28 -- 4 32
* -------------------------------------------------
- * total 132
+ * total 144
*/
-#define FLOW_BUFSIZE 132
+#define FLOW_BUFSIZE 144
int ovs_flow_to_nlattrs(const struct sw_flow_key *, struct sk_buff *);
int ovs_flow_from_nlattrs(struct sw_flow_key *swkey, int *key_lenp,
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 6aabd77..564b9fc 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -250,10 +250,11 @@
else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
cl = defmap[TC_PRIO_BESTEFFORT];
- if (cl == NULL || cl->level >= head->level)
+ if (cl == NULL)
goto fallback;
}
-
+ if (cl->level >= head->level)
+ goto fallback;
#ifdef CONFIG_NET_CLS_ACT
switch (result) {
case TC_ACT_QUEUED:
diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c
index 9fc1c62..4e606fc 100644
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -191,7 +191,6 @@
if (list_empty(&flow->flowchain)) {
list_add_tail(&flow->flowchain, &q->new_flows);
- codel_vars_init(&flow->cvars);
q->new_flow_count++;
flow->deficit = q->quantum;
flow->dropped = 0;
@@ -418,6 +417,7 @@
struct fq_codel_flow *flow = q->flows + i;
INIT_LIST_HEAD(&flow->flowchain);
+ codel_vars_init(&flow->cvars);
}
}
if (sch->limit >= 1)
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index e901583..d42234c 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -102,9 +102,8 @@
if (q == NULL)
continue;
- for (n = 0; n < table->DPs; n++)
- if (table->tab[n] && table->tab[n] != q &&
- table->tab[n]->prio == q->prio)
+ for (n = i + 1; n < table->DPs; n++)
+ if (table->tab[n] && table->tab[n]->prio == q->prio)
return 1;
}
@@ -137,6 +136,7 @@
struct gred_sched_data *q)
{
table->wred_set.qavg = q->vars.qavg;
+ table->wred_set.qidlestart = q->vars.qidlestart;
}
static inline int gred_use_ecn(struct gred_sched *t)
@@ -176,7 +176,7 @@
skb->tc_index = (skb->tc_index & ~GRED_VQ_MASK) | dp;
}
- /* sum up all the qaves of prios <= to ours to get the new qave */
+ /* sum up all the qaves of prios < ours to get the new qave */
if (!gred_wred_mode(t) && gred_rio_mode(t)) {
int i;
@@ -260,16 +260,18 @@
} else {
q->backlog -= qdisc_pkt_len(skb);
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
return skb;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return NULL;
}
@@ -291,19 +293,20 @@
q->backlog -= len;
q->stats.other++;
- if (!q->backlog && !gred_wred_mode(t))
- red_start_of_idle_period(&q->vars);
+ if (gred_wred_mode(t)) {
+ if (!sch->qstats.backlog)
+ red_start_of_idle_period(&t->wred_set);
+ } else {
+ if (!q->backlog)
+ red_start_of_idle_period(&q->vars);
+ }
}
qdisc_drop(skb, sch);
return len;
}
- if (gred_wred_mode(t) && !red_is_idling(&t->wred_set))
- red_start_of_idle_period(&t->wred_set);
-
return 0;
-
}
static void gred_reset(struct Qdisc *sch)
@@ -535,6 +538,7 @@
for (i = 0; i < MAX_DPs; i++) {
struct gred_sched_data *q = table->tab[i];
struct tc_gred_qopt opt;
+ unsigned long qavg;
memset(&opt, 0, sizeof(opt));
@@ -566,7 +570,9 @@
if (gred_wred_mode(table))
gred_load_wred_set(table, q);
- opt.qave = red_calc_qavg(&q->parms, &q->vars, q->vars.qavg);
+ qavg = red_calc_qavg(&q->parms, &q->vars,
+ q->vars.qavg >> q->parms.Wlog);
+ opt.qave = qavg >> q->parms.Wlog;
append_opt:
if (nla_append(skb, sizeof(opt), &opt) < 0)
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 838e18b..be50aa2 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -364,6 +364,25 @@
return retval;
}
+static void sctp_packet_release_owner(struct sk_buff *skb)
+{
+ sk_free(skb->sk);
+}
+
+static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sctp_packet_release_owner;
+
+ /*
+ * The data chunks have already been accounted for in sctp_sendmsg(),
+ * therefore only reserve a single byte to keep socket around until
+ * the packet has been transmitted.
+ */
+ atomic_inc(&sk->sk_wmem_alloc);
+}
+
/* All packets are sent to the network through this function from
* sctp_outq_tail().
*
@@ -405,7 +424,7 @@
/* Set the owning socket so that we know where to get the
* destination IP address.
*/
- skb_set_owner_w(nskb, sk);
+ sctp_packet_set_owner_w(nskb, sk);
if (!sctp_transport_dst_check(tp)) {
sctp_transport_route(tp, NULL, sctp_sk(sk));
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index a5a402a..5d7f61d 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -969,11 +969,11 @@
return false;
}
-static void xprt_alloc_slot(struct rpc_task *task)
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
{
- struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_rqst *req;
+ spin_lock(&xprt->reserve_lock);
if (!list_empty(&xprt->free)) {
req = list_entry(xprt->free.next, struct rpc_rqst, rq_list);
list_del(&req->rq_list);
@@ -994,12 +994,29 @@
default:
task->tk_status = -EAGAIN;
}
+ spin_unlock(&xprt->reserve_lock);
return;
out_init_req:
task->tk_status = 0;
task->tk_rqstp = req;
xprt_request_init(task, xprt);
+ spin_unlock(&xprt->reserve_lock);
}
+EXPORT_SYMBOL_GPL(xprt_alloc_slot);
+
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
+{
+ /* Note: grabbing the xprt_lock_write() ensures that we throttle
+ * new slot allocation if the transport is congested (i.e. when
+ * reconnecting a stream transport or when out of socket write
+ * buffer space).
+ */
+ if (xprt_lock_write(xprt, task)) {
+ xprt_alloc_slot(xprt, task);
+ xprt_release_write(xprt, task);
+ }
+}
+EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot);
static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
@@ -1083,20 +1100,9 @@
if (task->tk_rqstp != NULL)
return;
- /* Note: grabbing the xprt_lock_write() here is not strictly needed,
- * but ensures that we throttle new slot allocation if the transport
- * is congested (e.g. if reconnecting or if we're out of socket
- * write buffer space).
- */
task->tk_timeout = 0;
task->tk_status = -EAGAIN;
- if (!xprt_lock_write(xprt, task))
- return;
-
- spin_lock(&xprt->reserve_lock);
- xprt_alloc_slot(task);
- spin_unlock(&xprt->reserve_lock);
- xprt_release_write(xprt, task);
+ xprt->ops->alloc_slot(xprt, task);
}
static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt)
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 06cdbff..5d9202d 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -713,6 +713,7 @@
static struct rpc_xprt_ops xprt_rdma_procs = {
.reserve_xprt = xprt_rdma_reserve_xprt,
.release_xprt = xprt_release_xprt_cong, /* sunrpc/xprt.c */
+ .alloc_slot = xprt_alloc_slot,
.release_request = xprt_release_rqst_cong, /* ditto */
.set_retrans_timeout = xprt_set_retrans_timeout_def, /* ditto */
.rpcbind = rpcb_getport_async, /* sunrpc/rpcb_clnt.c */
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 4005672..a35b8e5 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2473,6 +2473,7 @@
static struct rpc_xprt_ops xs_local_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = xs_local_rpcbind,
.set_port = xs_local_set_port,
.connect = xs_connect,
@@ -2489,6 +2490,7 @@
.set_buffer_size = xs_udp_set_buffer_size,
.reserve_xprt = xprt_reserve_xprt_cong,
.release_xprt = xprt_release_xprt_cong,
+ .alloc_slot = xprt_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
@@ -2506,6 +2508,7 @@
static struct rpc_xprt_ops xs_tcp_ops = {
.reserve_xprt = xprt_reserve_xprt,
.release_xprt = xs_tcp_release_xprt,
+ .alloc_slot = xprt_lock_and_alloc_slot,
.rpcbind = rpcb_getport_async,
.set_port = xs_set_port,
.connect = xs_connect,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 97026f3..1e37dbf 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5633,8 +5633,10 @@
sizeof(connect.ht_capa_mask));
if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) {
- if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK])
+ if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) {
+ kfree(connkeys);
return -EINVAL;
+ }
memcpy(&connect.ht_capa,
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]),
sizeof(connect.ht_capa));
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 54a0dc2e..ab2bb42 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -212,7 +212,7 @@
/* only the first xfrm gets the encap type */
encap_type = 0;
- if (async && x->repl->check(x, skb, seq)) {
+ if (async && x->repl->recheck(x, skb, seq)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
goto drop_unlock;
}
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 2f6d11d..3efb07d 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -420,6 +420,18 @@
return -EINVAL;
}
+static int xfrm_replay_recheck_esn(struct xfrm_state *x,
+ struct sk_buff *skb, __be32 net_seq)
+{
+ if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi !=
+ htonl(xfrm_replay_seqhi(x, net_seq)))) {
+ x->stats.replay_window++;
+ return -EINVAL;
+ }
+
+ return xfrm_replay_check_esn(x, skb, net_seq);
+}
+
static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
{
unsigned int bitnr, nr, i;
@@ -479,6 +491,7 @@
static struct xfrm_replay xfrm_replay_legacy = {
.advance = xfrm_replay_advance,
.check = xfrm_replay_check,
+ .recheck = xfrm_replay_check,
.notify = xfrm_replay_notify,
.overflow = xfrm_replay_overflow,
};
@@ -486,6 +499,7 @@
static struct xfrm_replay xfrm_replay_bmp = {
.advance = xfrm_replay_advance_bmp,
.check = xfrm_replay_check_bmp,
+ .recheck = xfrm_replay_check_bmp,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_bmp,
};
@@ -493,6 +507,7 @@
static struct xfrm_replay xfrm_replay_esn = {
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
+ .recheck = xfrm_replay_recheck_esn,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_esn,
};
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 4235a63..b3d907e 100644
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -74,8 +74,13 @@
info KSYM ${2}
local kallsymopt;
+ if [ -n "${CONFIG_SYMBOL_PREFIX}" ]; then
+ kallsymopt="${kallsymopt} \
+ --symbol-prefix=${CONFIG_SYMBOL_PREFIX}"
+ fi
+
if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
- kallsymopt=--all-symbols
+ kallsymopt="${kallsymopt} --all-symbols"
fi
local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index ec2118d..eb60cb8 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -80,14 +80,12 @@
int maj = imajor(inode);
int ret;
- if (f->f_flags & O_WRONLY)
+ if ((f->f_flags & O_ACCMODE) == O_WRONLY)
dirn = SND_COMPRESS_PLAYBACK;
- else if (f->f_flags & O_RDONLY)
+ else if ((f->f_flags & O_ACCMODE) == O_RDONLY)
dirn = SND_COMPRESS_CAPTURE;
- else {
- pr_err("invalid direction\n");
+ else
return -EINVAL;
- }
if (maj == snd_major)
compr = snd_lookup_minor_data(iminor(inode),
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f25c24c..1c65cc5 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2353,6 +2353,7 @@
}
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
+ memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
snd_hda_jack_tbl_clear(codec);
codec->proc_widget_hook = NULL;
codec->spec = NULL;
@@ -2368,7 +2369,6 @@
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
- memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
codec->slave_dig_outs = NULL;
codec->spdif_status_reset = 0;
module_put(codec->owner);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 60882c6..c4763c5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2701,6 +2701,8 @@
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF),
+ SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6f806d3..3d4722f 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1075,7 +1075,7 @@
static const char * const slave_pfxs[] = {
"Front", "Surround", "Center", "LFE", "Side",
- "Headphone", "Speaker", "IEC958",
+ "Headphone", "Speaker", "IEC958", "PCM",
NULL
};
diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 764cc93d..075d5aa 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -297,6 +297,7 @@
}
static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
{
@@ -307,7 +308,7 @@
.info = ak4396_dac_vol_info,
.get = ak4396_dac_vol_get,
.put = ak4396_dac_vol_put,
- .tlv = { .p = db_scale_wm_dac },
+ .tlv = { .p = ak4396_db_scale },
},
};
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 5c9caca..1cf7a32 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -426,7 +426,7 @@
940800,
1411200,
1881600,
- 2882400,
+ 2822400,
3763200,
5644800,
7526400,
diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c
index 8f726c0..115a403 100644
--- a/sound/soc/codecs/mc13783.c
+++ b/sound/soc/codecs/mc13783.c
@@ -659,7 +659,7 @@
.id = MC13783_ID_STEREO_DAC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
@@ -670,7 +670,7 @@
.id = MC13783_ID_STEREO_CODEC,
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
@@ -692,14 +692,14 @@
.id = MC13783_ID_SYNC,
.playback = {
.stream_name = "Playback",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = MC13783_FORMATS,
},
.capture = {
.stream_name = "Capture",
- .channels_min = 1,
+ .channels_min = 2,
.channels_max = 2,
.rates = MC13783_RATES_RECORD,
.formats = MC13783_FORMATS,
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 0013afe..dc4262e 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -100,7 +100,7 @@
{ 14, 0x0000 }, /* R14 - Power Management 2 */
{ 15, 0x0000 }, /* R15 - Power Management 3 */
{ 18, 0x0000 }, /* R18 - Power Management 6 */
- { 19, 0x945E }, /* R20 - Clock Rates 0 */
+ { 20, 0x945E }, /* R20 - Clock Rates 0 */
{ 21, 0x0C05 }, /* R21 - Clock Rates 1 */
{ 22, 0x0006 }, /* R22 - Clock Rates 2 */
{ 24, 0x0050 }, /* R24 - Audio Interface 0 */
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index fb21b17..199408e 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -94,7 +94,7 @@
dev_err(&pdev->dev, "audmux internal port setup failed\n");
return ret;
}
- imx_audmux_v2_configure_port(ext_port,
+ ret = imx_audmux_v2_configure_port(ext_port,
IMX_AUDMUX_V2_PTCR_SYN,
IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
if (ret) {
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
index 009533a..a52e87d 100644
--- a/sound/soc/omap/am3517evm.c
+++ b/sound/soc/omap/am3517evm.c
@@ -27,7 +27,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
@@ -59,7 +59,7 @@
return ret;
}
- snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
+ ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n");
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 7d4fa8e..dc0ee76 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -32,8 +32,8 @@
#include <asm/mach-types.h>
-#include <plat/board-ams-delta.h>
-#include <plat/mcbsp.h>
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/igep0020.c b/sound/soc/omap/igep0020.c
index e835781..5ed8716 100644
--- a/sound/soc/omap/igep0020.c
+++ b/sound/soc/omap/igep0020.c
@@ -29,7 +29,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index f18e488..a681a9a 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -25,7 +25,7 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <plat/cpu.h>
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index abac4b6..521bfc3 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -32,7 +32,7 @@
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index d0ee71d..1b186277 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -34,7 +34,7 @@
#include <plat/cpu.h>
#include <plat/dma.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "mcbsp.h"
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index 2830dfd..e263188 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -29,7 +29,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
index 3d468c9..d632bfb 100644
--- a/sound/soc/omap/omap3evm.c
+++ b/sound/soc/omap/omap3evm.c
@@ -27,7 +27,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 4c3a097..43d950a 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -31,7 +31,7 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index b1a9d64..3960e8d 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -31,7 +31,7 @@
#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index 6ac3e0c..502bce2 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -29,7 +29,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index 2712dd2..d921ddb 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -31,7 +31,7 @@
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/soc.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "../codecs/tpa6130a2.h"
#include <asm/mach-types.h>
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 78e1419..597cae7 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -33,8 +33,8 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
-#include <plat/mcbsp.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
index 920e0d9..23de2b2 100644
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c
@@ -29,7 +29,7 @@
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/board-zoom.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index f3ebc38..b70964e 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -34,9 +34,7 @@
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_U16_LE |
SNDRV_PCM_FMTBIT_U8 |
@@ -248,15 +246,11 @@
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
prtd->params->ops->stop(prtd->params->ch);
break;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index dd7c49f..f90139b 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -291,8 +291,11 @@
if (dapm->codec->driver->set_bias_level)
ret = dapm->codec->driver->set_bias_level(dapm->codec,
level);
- } else
+ else
+ dapm->bias_level = level;
+ } else if (!card || dapm != &card->dapm) {
dapm->bias_level = level;
+ }
if (ret != 0)
goto out;
diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c
index 97c2cac..8c7f237 100644
--- a/sound/soc/spear/spear_pcm.c
+++ b/sound/soc/spear/spear_pcm.c
@@ -138,7 +138,7 @@
continue;
buf = &substream->dma_buffer;
- if (!buf && !buf->area)
+ if (!buf || !buf->area)
continue;
dma_free_writecombine(pcm->card->dev, buf->bytes,
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index 02bcd30..19e5fe7 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -1,6 +1,6 @@
config SND_SOC_TEGRA
tristate "SoC Audio for the Tegra System-on-Chip"
- depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
+ depends on ARCH_TEGRA && TEGRA20_APB_DMA
select REGMAP_MMIO
select SND_SOC_DMAENGINE_PCM if TEGRA20_APB_DMA
help
diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c
index e463529..76cb1b3 100644
--- a/sound/soc/tegra/tegra_alc5632.c
+++ b/sound/soc/tegra/tegra_alc5632.c
@@ -89,7 +89,6 @@
.name = "Headset detection",
.report = SND_JACK_HEADSET,
.debounce_time = 150,
- .invert = 1,
};
static const struct snd_soc_dapm_widget tegra_alc5632_dapm_widgets[] = {
diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
index 5658bce..e187339 100644
--- a/sound/soc/tegra/tegra_pcm.c
+++ b/sound/soc/tegra/tegra_pcm.c
@@ -57,237 +57,6 @@
.fifo_size = 4,
};
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static void tegra_pcm_queue_dma(struct tegra_runtime_data *prtd)
-{
- struct snd_pcm_substream *substream = prtd->substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- struct tegra_dma_req *dma_req;
- unsigned long addr;
-
- dma_req = &prtd->dma_req[prtd->dma_req_idx];
- prtd->dma_req_idx = 1 - prtd->dma_req_idx;
-
- addr = buf->addr + prtd->dma_pos;
- prtd->dma_pos += dma_req->size;
- if (prtd->dma_pos >= prtd->dma_pos_end)
- prtd->dma_pos = 0;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dma_req->source_addr = addr;
- else
- dma_req->dest_addr = addr;
-
- tegra_dma_enqueue_req(prtd->dma_chan, dma_req);
-}
-
-static void dma_complete_callback(struct tegra_dma_req *req)
-{
- struct tegra_runtime_data *prtd = (struct tegra_runtime_data *)req->dev;
- struct snd_pcm_substream *substream = prtd->substream;
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- spin_lock(&prtd->lock);
-
- if (!prtd->running) {
- spin_unlock(&prtd->lock);
- return;
- }
-
- if (++prtd->period_index >= runtime->periods)
- prtd->period_index = 0;
-
- tegra_pcm_queue_dma(prtd);
-
- spin_unlock(&prtd->lock);
-
- snd_pcm_period_elapsed(substream);
-}
-
-static void setup_dma_tx_request(struct tegra_dma_req *req,
- struct tegra_pcm_dma_params * dmap)
-{
- req->complete = dma_complete_callback;
- req->to_memory = false;
- req->dest_addr = dmap->addr;
- req->dest_wrap = dmap->wrap;
- req->source_bus_width = 32;
- req->source_wrap = 0;
- req->dest_bus_width = dmap->width;
- req->req_sel = dmap->req_sel;
-}
-
-static void setup_dma_rx_request(struct tegra_dma_req *req,
- struct tegra_pcm_dma_params * dmap)
-{
- req->complete = dma_complete_callback;
- req->to_memory = true;
- req->source_addr = dmap->addr;
- req->dest_wrap = 0;
- req->source_bus_width = dmap->width;
- req->source_wrap = dmap->wrap;
- req->dest_bus_width = 32;
- req->req_sel = dmap->req_sel;
-}
-
-static int tegra_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct tegra_pcm_dma_params * dmap;
- int ret = 0;
-
- prtd = kzalloc(sizeof(struct tegra_runtime_data), GFP_KERNEL);
- if (prtd == NULL)
- return -ENOMEM;
-
- runtime->private_data = prtd;
- prtd->substream = substream;
-
- spin_lock_init(&prtd->lock);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- dmap = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- setup_dma_tx_request(&prtd->dma_req[0], dmap);
- setup_dma_tx_request(&prtd->dma_req[1], dmap);
- } else {
- dmap = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- setup_dma_rx_request(&prtd->dma_req[0], dmap);
- setup_dma_rx_request(&prtd->dma_req[1], dmap);
- }
-
- prtd->dma_req[0].dev = prtd;
- prtd->dma_req[1].dev = prtd;
-
- prtd->dma_chan = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
- if (prtd->dma_chan == NULL) {
- ret = -ENOMEM;
- goto err;
- }
-
- /* Set HW params now that initialization is complete */
- snd_soc_set_runtime_hwparams(substream, &tegra_pcm_hardware);
-
- /* Ensure that buffer size is a multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto err;
-
- return 0;
-
-err:
- if (prtd->dma_chan) {
- tegra_dma_free_channel(prtd->dma_chan);
- }
-
- kfree(prtd);
-
- return ret;
-}
-
-static int tegra_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- tegra_dma_free_channel(prtd->dma_chan);
-
- kfree(prtd);
-
- return 0;
-}
-
-static int tegra_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
- prtd->dma_req[0].size = params_period_bytes(params);
- prtd->dma_req[1].size = prtd->dma_req[0].size;
-
- return 0;
-}
-
-static int tegra_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- snd_pcm_set_runtime_buffer(substream, NULL);
-
- return 0;
-}
-
-static int tegra_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->dma_pos = 0;
- prtd->dma_pos_end = frames_to_bytes(runtime, runtime->periods * runtime->period_size);
- prtd->period_index = 0;
- prtd->dma_req_idx = 0;
- /* Fall-through */
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- spin_lock_irqsave(&prtd->lock, flags);
- prtd->running = 1;
- spin_unlock_irqrestore(&prtd->lock, flags);
- tegra_pcm_queue_dma(prtd);
- tegra_pcm_queue_dma(prtd);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- spin_lock_irqsave(&prtd->lock, flags);
- prtd->running = 0;
- spin_unlock_irqrestore(&prtd->lock, flags);
- tegra_dma_dequeue_req(prtd->dma_chan, &prtd->dma_req[0]);
- tegra_dma_dequeue_req(prtd->dma_chan, &prtd->dma_req[1]);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t tegra_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct tegra_runtime_data *prtd = runtime->private_data;
-
- return prtd->period_index * runtime->period_size;
-}
-
-
-static int tegra_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops tegra_pcm_ops = {
- .open = tegra_pcm_open,
- .close = tegra_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = tegra_pcm_hw_params,
- .hw_free = tegra_pcm_hw_free,
- .trigger = tegra_pcm_trigger,
- .pointer = tegra_pcm_pointer,
- .mmap = tegra_pcm_mmap,
-};
-#else
static int tegra_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -334,11 +103,11 @@
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.dst_addr = dmap->addr;
- slave_config.src_maxburst = 0;
+ slave_config.dst_maxburst = 4;
} else {
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_config.src_addr = dmap->addr;
- slave_config.dst_maxburst = 0;
+ slave_config.src_maxburst = 4;
}
slave_config.slave_id = dmap->req_sel;
@@ -399,7 +168,6 @@
.pointer = snd_dmaengine_pcm_pointer,
.mmap = tegra_pcm_mmap,
};
-#endif
static int tegra_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
{
diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h
index a3a4503..b40279b 100644
--- a/sound/soc/tegra/tegra_pcm.h
+++ b/sound/soc/tegra/tegra_pcm.h
@@ -40,20 +40,6 @@
unsigned long req_sel;
};
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-struct tegra_runtime_data {
- struct snd_pcm_substream *substream;
- spinlock_t lock;
- int running;
- int dma_pos;
- int dma_pos_end;
- int period_index;
- int dma_req_idx;
- struct tegra_dma_req dma_req[2];
- struct tegra_dma_channel *dma_chan;
-};
-#endif
-
int tegra_pcm_platform_register(struct device *dev);
void tegra_pcm_platform_unregister(struct device *dev);
diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index 5c472f3..eb85113 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -663,7 +663,6 @@
struct ux500_msp **msp_p,
struct msp_i2s_platform_data *platform_data)
{
- int ret = 0;
struct resource *res = NULL;
struct i2s_controller *i2s_cont;
struct ux500_msp *msp;
@@ -685,15 +684,14 @@
if (res == NULL) {
dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n",
__func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
- msp->registers = ioremap(res->start, (res->end - res->start + 1));
+ msp->registers = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
if (msp->registers == NULL) {
dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__);
- ret = -ENOMEM;
- goto err_res;
+ return -ENOMEM;
}
msp->msp_state = MSP_STATE_IDLE;
@@ -705,7 +703,7 @@
dev_err(&pdev->dev,
"%s: ERROR: Failed to allocate I2S-controller!\n",
__func__);
- goto err_i2s_cont;
+ return -ENOMEM;
}
i2s_cont->dev.parent = &pdev->dev;
i2s_cont->data = (void *)msp;
@@ -716,14 +714,6 @@
msp->i2s_cont = i2s_cont;
return 0;
-
-err_i2s_cont:
- iounmap(msp->registers);
-
-err_res:
- devm_kfree(&pdev->dev, msp);
-
- return ret;
}
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
@@ -732,11 +722,6 @@
dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id);
device_unregister(&msp->i2s_cont->dev);
- devm_kfree(&pdev->dev, msp->i2s_cont);
-
- iounmap(msp->registers);
-
- devm_kfree(&pdev->dev, msp);
}
MODULE_LICENSE("GPL v2");
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index fd5e982..f782ce1 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1140,6 +1140,12 @@
int processed = urb->transfer_buffer_length / stride;
int est_delay;
+ /* ignore the delay accounting when procssed=0 is given, i.e.
+ * silent payloads are procssed before handling the actual data
+ */
+ if (!processed)
+ return;
+
spin_lock_irqsave(&subs->lock, flags);
est_delay = snd_usb_pcm_delay(subs, runtime->rate);
/* update delay with exact number of samples played */