sh_eth: Fix promiscuous mode on chips without TSU
Currently net_device_ops::set_rx_mode is only implemented for
chips with a TSU (multiple address table). However we do need
to turn the PRM (promiscuous) flag on and off for other chips.
- Remove the unlikely() from the TSU functions that we may safely
call for chips without a TSU
- Make setting of the MCT flag conditional on the tsu capability flag
- Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb
it into both net_device_ops structures
- Remove the previously-unreachable branch in sh_eth_rx_mode() that
would otherwise reset the flags to defaults for non-TSU chips
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 8d227d9..01dfae4 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2417,7 +2417,7 @@
struct sh_eth_private *mdp = netdev_priv(ndev);
int i, ret;
- if (unlikely(!mdp->cd->tsu))
+ if (!mdp->cd->tsu)
return 0;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++) {
@@ -2440,7 +2440,7 @@
void *reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
int i;
- if (unlikely(!mdp->cd->tsu))
+ if (!mdp->cd->tsu)
return;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++, reg_offset += 8) {
@@ -2450,8 +2450,8 @@
}
}
-/* Multicast reception directions set */
-static void sh_eth_set_multicast_list(struct net_device *ndev)
+/* Update promiscuous flag and multicast filter */
+static void sh_eth_set_rx_mode(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 ecmr_bits;
@@ -2462,7 +2462,9 @@
/* Initial condition is MCT = 1, PRM = 0.
* Depending on ndev->flags, set PRM or clear MCT
*/
- ecmr_bits = (sh_eth_read(ndev, ECMR) & ~ECMR_PRM) | ECMR_MCT;
+ ecmr_bits = sh_eth_read(ndev, ECMR) & ~ECMR_PRM;
+ if (mdp->cd->tsu)
+ ecmr_bits |= ECMR_MCT;
if (!(ndev->flags & IFF_MULTICAST)) {
sh_eth_tsu_purge_mcast(ndev);
@@ -2491,9 +2493,6 @@
}
}
}
- } else {
- /* Normal, unicast/broadcast-only mode. */
- ecmr_bits = (ecmr_bits & ~ECMR_PRM) | ECMR_MCT;
}
/* update the ethernet mode */
@@ -2701,6 +2700,7 @@
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
+ .ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_tx_timeout = sh_eth_tx_timeout,
.ndo_do_ioctl = sh_eth_do_ioctl,
.ndo_validate_addr = eth_validate_addr,
@@ -2713,7 +2713,7 @@
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
- .ndo_set_rx_mode = sh_eth_set_multicast_list,
+ .ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_vlan_rx_add_vid = sh_eth_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = sh_eth_vlan_rx_kill_vid,
.ndo_tx_timeout = sh_eth_tx_timeout,