Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm:
PCI/ASPM: Remove redundant check of pcie_set_clkpm
* pci/dpc:
PCI: Remove DPC tristate module option
PCI: Bind DPC to Root Ports as well as Downstream Ports
PCI: Fix whitespace in struct dpc_dev
PCI: Convert Downstream Port Containment driver to use devm_* functions
* pci/hotplug:
PCI: Allow additional bus numbers for hotplug bridges
* pci/misc:
PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
PCI: Make bus_attr_resource_alignment static
MAINTAINERS: Add file patterns for PCI device tree bindings
PCI: Fix comment typo
* pci/msi:
PCI/MSI: irqchip: Fix PCI_MSI dependencies
* pci/pm:
PCI: pciehp: Ignore interrupts during D3cold
PCI: Document connection between pci_power_t and hardware PM capability
PCI: Add runtime PM support for PCIe ports
ACPI / hotplug / PCI: Runtime resume bridge before rescan
PCI: Power on bridges before scanning new devices
PCI: Put PCIe ports into D3 during suspend
PCI: Don't clear d3cold_allowed for PCIe ports
PCI / PM: Enforce type casting for pci_power_t
* pci/virtualization:
PCI: Add ACS quirk for Solarflare SFC9220
PCI: Add DMA alias quirk for Adaptec 3805
PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 82b42c9..12a99c7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3016,6 +3016,9 @@
hpmemsize=nn[KMG] The fixed amount of bus space which is
reserved for hotplug bridge's memory window.
Default size is 2 megabytes.
+ hpbussize=nn The minimum amount of additional bus numbers
+ reserved for buses below a hotplug bridge.
+ Default is 1.
realloc= Enable/disable reallocating PCI bridge resources
if allocations done by BIOS are too small to
accommodate resources required by all child
@@ -3047,6 +3050,10 @@
compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
ports driver.
+ pcie_port_pm= [PCIE] PCIe port power management handling:
+ off Disable power management of all PCIe ports
+ force Forcibly enable power management of all PCIe ports
+
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
nomsi Do not use MSI for native PCIe PME signaling (this makes
all PCIe root ports use INTx for all services).
diff --git a/MAINTAINERS b/MAINTAINERS
index ed42cb6..2eea84d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8678,6 +8678,7 @@
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
S: Supported
+F: Documentation/devicetree/bindings/pci/
F: Documentation/PCI/
F: drivers/pci/
F: include/linux/pci*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 90542db..354c167 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -715,7 +715,7 @@
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5a0a691..21d955d 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -3,6 +3,7 @@
select ACPI_CCA_REQUIRED if ACPI
select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ select ACPI_MCFG if ACPI
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAS_ELF_RANDOMIZE
@@ -20,9 +21,9 @@
select ARM_ARCH_TIMER
select ARM_GIC
select AUDIT_ARCH_COMPAT_GENERIC
- select ARM_GIC_V2M if PCI_MSI
+ select ARM_GIC_V2M if PCI
select ARM_GIC_V3
- select ARM_GIC_V3_ITS if PCI_MSI
+ select ARM_GIC_V3_ITS if PCI
select ARM_PSCI_FW
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
@@ -96,6 +97,7 @@
select OF_EARLY_FLATTREE
select OF_NUMA if NUMA && OF
select OF_RESERVED_MEM
+ select PCI_ECAM if ACPI
select PERF_USE_VMALLOC
select POWER_RESET
select POWER_SUPPLY
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 3c4e308..94cd43c 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -17,6 +17,9 @@
#include <linux/mm.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
#include <linux/slab.h>
/*
@@ -50,11 +53,16 @@
}
/*
- * Try to assign the IRQ number from DT when adding a new device
+ * Try to assign the IRQ number when probing a new device
*/
-int pcibios_add_device(struct pci_dev *dev)
+int pcibios_alloc_irq(struct pci_dev *dev)
{
- dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+ if (acpi_disabled)
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+#ifdef CONFIG_ACPI
+ else
+ return acpi_pci_irq_enable(dev);
+#endif
return 0;
}
@@ -65,13 +73,21 @@
int raw_pci_read(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *val)
{
- return -ENXIO;
+ struct pci_bus *b = pci_find_bus(domain, bus);
+
+ if (!b)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return b->ops->read(b, devfn, reg, len, val);
}
int raw_pci_write(unsigned int domain, unsigned int bus,
unsigned int devfn, int reg, int len, u32 val)
{
- return -ENXIO;
+ struct pci_bus *b = pci_find_bus(domain, bus);
+
+ if (!b)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return b->ops->write(b, devfn, reg, len, val);
}
#ifdef CONFIG_NUMA
@@ -85,10 +101,124 @@
#endif
#ifdef CONFIG_ACPI
-/* Root bridge scanning */
+
+struct acpi_pci_generic_root_info {
+ struct acpi_pci_root_info common;
+ struct pci_config_window *cfg; /* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ struct acpi_pci_root *root = acpi_driver_data(adev);
+
+ return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ if (!acpi_disabled) {
+ struct pci_config_window *cfg = bridge->bus->sysdata;
+ struct acpi_device *adev = to_acpi_device(cfg->parent);
+ ACPI_COMPANION_SET(&bridge->dev, adev);
+ }
+
+ return 0;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+ struct resource *bus_res = &root->secondary;
+ u16 seg = root->segment;
+ struct pci_config_window *cfg;
+ struct resource cfgres;
+ unsigned int bsz;
+
+ /* Use address from _CBA if present, otherwise lookup MCFG */
+ if (!root->mcfg_addr)
+ root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
+
+ if (!root->mcfg_addr) {
+ dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
+ seg, bus_res);
+ return NULL;
+ }
+
+ bsz = 1 << pci_generic_ecam_ops.bus_shift;
+ cfgres.start = root->mcfg_addr + bus_res->start * bsz;
+ cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
+ cfgres.flags = IORESOURCE_MEM;
+ cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
+ &pci_generic_ecam_ops);
+ if (IS_ERR(cfg)) {
+ dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
+ seg, bus_res, PTR_ERR(cfg));
+ return NULL;
+ }
+
+ return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+ struct acpi_pci_generic_root_info *ri;
+
+ ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+ pci_ecam_free(ri->cfg);
+ kfree(ri);
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .release_info = pci_acpi_generic_release_info,
+};
+
+/* Interface called from ACPI code to setup PCI host controller */
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- /* TODO: Should be revisited when implementing PCI on ACPI */
- return NULL;
+ int node = acpi_get_node(root->device->handle);
+ struct acpi_pci_generic_root_info *ri;
+ struct pci_bus *bus, *child;
+
+ ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+ if (!ri)
+ return NULL;
+
+ ri->cfg = pci_acpi_setup_ecam_mapping(root);
+ if (!ri->cfg) {
+ kfree(ri);
+ return NULL;
+ }
+
+ acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
+ ri->cfg);
+ if (!bus)
+ return NULL;
+
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ return bus;
}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ acpi_pci_remove_bus(bus);
+}
+
#endif
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8196054..7b6a9d1 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -133,7 +133,7 @@
if (pci_probe & PCI_NOASSIGN_BARS) {
/*
* If the BIOS did not assign the BAR, zero out the
- * resource so the kernel doesn't attmept to assign
+ * resource so the kernel doesn't attempt to assign
* it later on in pci_assign_unassigned_resources
*/
for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b7e2e77..f98c328 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -217,6 +217,9 @@
bool
select CPU_IDLE
+config ACPI_MCFG
+ bool
+
config ACPI_CPPC_LIB
bool
depends on ACPI_PROCESSOR
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 251ce85..632e81f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -40,6 +40,7 @@
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o
+obj-$(CONFIG_ACPI_MCFG) += pci_mcfg.o
acpi-y += acpi_lpss.o acpi_apd.o
acpi-y += acpi_platform.o
acpi-y += acpi_pnp.o
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
new file mode 100644
index 0000000..b5b376e
--- /dev/null
+++ b/drivers/acpi/pci_mcfg.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ * Author: Jayachandran C <jchandra@broadcom.com>
+ * Copyright (C) 2016 Semihalf
+ * Author: Tomasz Nowicki <tn@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+
+/* Structure to hold entries from the MCFG table */
+struct mcfg_entry {
+ struct list_head list;
+ phys_addr_t addr;
+ u16 segment;
+ u8 bus_start;
+ u8 bus_end;
+};
+
+/* List to save MCFG entries */
+static LIST_HEAD(pci_mcfg_list);
+
+phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+{
+ struct mcfg_entry *e;
+
+ /*
+ * We expect exact match, unless MCFG entry end bus covers more than
+ * specified by caller.
+ */
+ list_for_each_entry(e, &pci_mcfg_list, list) {
+ if (e->segment == seg && e->bus_start == bus_res->start &&
+ e->bus_end >= bus_res->end)
+ return e->addr;
+ }
+
+ return 0;
+}
+
+static __init int pci_mcfg_parse(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ struct acpi_mcfg_allocation *mptr;
+ struct mcfg_entry *e, *arr;
+ int i, n;
+
+ if (header->length < sizeof(struct acpi_table_mcfg))
+ return -EINVAL;
+
+ n = (header->length - sizeof(struct acpi_table_mcfg)) /
+ sizeof(struct acpi_mcfg_allocation);
+ mcfg = (struct acpi_table_mcfg *)header;
+ mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+
+ arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
+ if (!arr)
+ return -ENOMEM;
+
+ for (i = 0, e = arr; i < n; i++, mptr++, e++) {
+ e->segment = mptr->pci_segment;
+ e->addr = mptr->address;
+ e->bus_start = mptr->start_bus_number;
+ e->bus_end = mptr->end_bus_number;
+ list_add(&e->list, &pci_mcfg_list);
+ }
+
+ pr_info("MCFG table detected, %d entries\n", n);
+ return 0;
+}
+
+/* Interface called by ACPI - parse and save MCFG table */
+void __init pci_mmcfg_late_init(void)
+{
+ int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
+ if (err)
+ pr_err("Failed to parse MCFG (%d)\n", err);
+}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index ae3fe4e..d144168 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -720,6 +720,36 @@
}
}
+static void acpi_pci_root_remap_iospace(struct resource_entry *entry)
+{
+#ifdef PCI_IOBASE
+ struct resource *res = entry->res;
+ resource_size_t cpu_addr = res->start;
+ resource_size_t pci_addr = cpu_addr - entry->offset;
+ resource_size_t length = resource_size(res);
+ unsigned long port;
+
+ if (pci_register_io_range(cpu_addr, length))
+ goto err;
+
+ port = pci_address_to_pio(cpu_addr);
+ if (port == (unsigned long)-1)
+ goto err;
+
+ res->start = port;
+ res->end = port + length - 1;
+ entry->offset = port - pci_addr;
+
+ if (pci_remap_iospace(res, cpu_addr) < 0)
+ goto err;
+
+ pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
+ return;
+err:
+ res->flags |= IORESOURCE_DISABLED;
+#endif
+}
+
int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
{
int ret;
@@ -740,6 +770,9 @@
"no IO and memory resources present in _CRS\n");
else {
resource_list_for_each_entry_safe(entry, tmp, list) {
+ if (entry->res->flags & IORESOURCE_IO)
+ acpi_pci_root_remap_iospace(entry);
+
if (entry->res->flags & IORESOURCE_DISABLED)
resource_list_destroy_entry(entry);
else
@@ -811,6 +844,8 @@
resource_list_for_each_entry(entry, &bridge->windows) {
res = entry->res;
+ if (res->flags & IORESOURCE_IO)
+ pci_unmap_iospace(res);
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index fa33c50..11ecb6c 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -15,9 +15,9 @@
config ARM_GIC_V2M
bool
- depends on ARM_GIC
- depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ select ARM_GIC
+ select PCI_MSI
config GIC_NON_BANKED
bool
@@ -31,7 +31,8 @@
config ARM_GIC_V3_ITS
bool
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI
+ depends on PCI_MSI
config ARM_NVIC
bool
@@ -56,13 +57,13 @@
config ARMADA_370_XP_IRQ
bool
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ select PCI_MSI if PCI
config ALPINE_MSI
bool
- depends on PCI && PCI_MSI
+ depends on PCI
+ select PCI_MSI
select GENERIC_IRQ_CHIP
- select PCI_MSI_IRQ_DOMAIN
config ATMEL_AIC_IRQ
bool
@@ -111,7 +112,6 @@
bool
select ARM_GIC_V3
select ARM_GIC_V3_ITS
- select GENERIC_MSI_IRQ_DOMAIN
config IMGPDC_IRQ
bool
@@ -244,12 +244,10 @@
config MVEBU_ODMI
bool
- select GENERIC_MSI_IRQ_DOMAIN
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
config PARTITION_PERCPU
bool
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56389be..67f9916 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -25,7 +25,7 @@
If you don't know what to do here, say Y.
config PCI_MSI_IRQ_DOMAIN
- bool
+ def_bool ARM || ARM64 || X86
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index dd7cdbe..2873136 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -291,6 +291,7 @@
pci_fixup_device(pci_fixup_final, dev);
pci_create_sysfs_dev_files(dev);
pci_proc_attach_device(dev);
+ pci_bridge_d3_device_changed(dev);
dev->match_driver = true;
retval = device_attach(&dev->dev);
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index f9832ad..66e0d71 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -19,10 +19,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/pci-ecam.h>
#include <linux/slab.h>
-#include "ecam.h"
-
/*
* On 64-bit systems, we do a single ioremap for the whole config space
* since we have enough virtual address range available. On 32-bit, we
@@ -52,6 +51,7 @@
if (!cfg)
return ERR_PTR(-ENOMEM);
+ cfg->parent = dev;
cfg->ops = ops;
cfg->busr.start = busr->start;
cfg->busr.end = busr->end;
@@ -95,7 +95,7 @@
}
if (ops->init) {
- err = ops->init(dev, cfg);
+ err = ops->init(cfg);
if (err)
goto err_exit;
}
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 5d2374e..80cfe2f 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -3,8 +3,9 @@
config PCI_DRA7XX
bool "TI DRA7xx PCIe controller"
- select PCIE_DW
depends on OF && HAS_IOMEM && TI_PIPE3
+ depends on PCI_MSI_IRQ_DOMAIN
+ select PCIE_DW
help
Enables support for the PCIe controller in the DRA7xx SoC. There
are two instances of PCIe controller in DRA7xx. This controller can
@@ -20,7 +21,7 @@
config PCIE_XILINX_NWL
bool "NWL PCIe Core"
depends on ARCH_ZYNQMP
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say 'Y' here if you want kernel support for Xilinx
NWL PCIe controller. The controller can act as Root Port
@@ -29,6 +30,7 @@
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
@@ -40,16 +42,19 @@
config PCIE_DW
bool
+ depends on PCI_MSI_IRQ_DOMAIN
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
@@ -72,8 +77,7 @@
config PCIE_RCAR
bool "Renesas R-Car PCIe controller"
depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
- select PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe controller support on R-Car SoCs.
@@ -92,6 +96,7 @@
config PCIE_SPEAR13XX
bool "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -100,6 +105,7 @@
config PCI_KEYSTONE
bool "TI Keystone PCIe controller"
depends on ARCH_KEYSTONE
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -120,7 +126,6 @@
depends on ARCH_XGENE
depends on OF
select PCIEPORTBUS
- select PCI_MSI_IRQ_DOMAIN if PCI_MSI
help
Say Y here if you want internal PCI support on APM X-Gene SoC.
There are 5 internal PCIe ports available. Each port is GEN3 capable
@@ -128,7 +133,8 @@
config PCI_XGENE_MSI
bool "X-Gene v1 PCIe MSI feature"
- depends on PCI_XGENE && PCI_MSI
+ depends on PCI_XGENE
+ depends on PCI_MSI_IRQ_DOMAIN
default y
help
Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
@@ -137,6 +143,7 @@
config PCI_LAYERSCAPE
bool "Freescale Layerscape PCIe controller"
depends on OF && (ARM || ARCH_LAYERSCAPE)
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select MFD_SYSCON
help
@@ -177,8 +184,7 @@
config PCIE_IPROC_MSI
bool "Broadcom iProc PCIe MSI support"
depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
- depends on PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCI_MSI_IRQ_DOMAIN
default ARCH_BCM_IPROC
help
Say Y here if you want to enable MSI support for Broadcom's iProc
@@ -195,8 +201,8 @@
config PCIE_ALTERA_MSI
bool "Altera PCIe MSI feature"
- depends on PCIE_ALTERA && PCI_MSI
- select PCI_MSI_IRQ_DOMAIN
+ depends on PCIE_ALTERA
+ depends on PCI_MSI_IRQ_DOMAIN
help
Say Y here if you want PCIe MSI support for the Altera FPGA.
This MSI driver supports Altera MSI to GIC controller IP.
@@ -204,6 +210,7 @@
config PCI_HISI
depends on OF && ARM64
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIEPORTBUS
select PCIE_DW
help
@@ -213,6 +220,7 @@
config PCIE_QCOM
bool "Qualcomm PCIe controller"
depends on ARCH_QCOM && OF
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
@@ -237,6 +245,7 @@
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU
+ depends on PCI_MSI_IRQ_DOMAIN
select PCIE_DW
select PCIEPORTBUS
help
diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c
index 8cba7ab..c18b9e3 100644
--- a/drivers/pci/host/pci-host-common.c
+++ b/drivers/pci/host/pci-host-common.c
@@ -20,10 +20,9 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static int gen_pci_parse_request_of_pci_ranges(struct device *dev,
struct list_head *resources, struct resource **bus_range)
{
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index 6eaceab..f0ca6de 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -23,10 +23,9 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static struct pci_ecam_ops gen_pci_cfg_cam_bus_ops = {
.bus_shift = 16,
.pci_ops = {
diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c
index 540d030..a9fc1c9 100644
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -11,10 +11,9 @@
#include <linux/ioport.h>
#include <linux/of_pci.h>
#include <linux/of.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
static void set_val(u32 v, int where, int size, u32 *val)
{
int shift = (where & 3) * 8;
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 9b8ab94..91f6fc6 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -18,10 +18,9 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../ecam.h"
-
#define PEM_CFG_WR 0x28
#define PEM_CFG_RD 0x30
@@ -285,8 +284,9 @@
return pci_generic_config_write(bus, devfn, where, size, val);
}
-static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg)
+static int thunder_pem_init(struct pci_config_window *cfg)
{
+ struct device *dev = cfg->parent;
resource_size_t bar4_start;
struct resource *res_pem;
struct thunder_pem_pci *pem_pci;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index fa49f91..6a33ddc 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -675,6 +675,8 @@
if (bridge->is_going_away)
return;
+ pm_runtime_get_sync(&bridge->pci_dev->dev);
+
list_for_each_entry(slot, &bridge->slots, node) {
struct pci_bus *bus = slot->bus;
struct pci_dev *dev, *tmp;
@@ -694,6 +696,8 @@
disable_slot(slot);
}
}
+
+ pm_runtime_put(&bridge->pci_dev->dev);
}
/*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 5c24e93..08e84d6 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -546,6 +546,10 @@
u8 present;
bool link;
+ /* Interrupts cannot originate from a controller that's asleep */
+ if (pdev->current_state == PCI_D3cold)
+ return IRQ_NONE;
+
/*
* In order to guarantee that all interrupt events are
* serviced, we need to re-inspect Slot Status register after
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index d7ffd66..e39a67c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -777,7 +777,7 @@
if (!pci_dev->state_saved) {
pci_save_state(pci_dev);
- if (!pci_has_subordinate(pci_dev))
+ if (pci_power_manageable(pci_dev))
pci_prepare_to_sleep(pci_dev);
}
@@ -1144,7 +1144,6 @@
return -ENOSYS;
pci_dev->state_saved = false;
- pci_dev->no_d3cold = false;
error = pm->runtime_suspend(dev);
if (error) {
/*
@@ -1161,8 +1160,6 @@
return error;
}
- if (!pci_dev->d3cold_allowed)
- pci_dev->no_d3cold = true;
pci_fixup_device(pci_fixup_suspend, pci_dev);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index d319a9c..bcd10c7 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -406,6 +406,11 @@
return -EINVAL;
pdev->d3cold_allowed = !!val;
+ if (pdev->d3cold_allowed)
+ pci_d3cold_enable(pdev);
+ else
+ pci_d3cold_disable(pdev);
+
pm_runtime_resume(dev);
return count;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c8b4dbd..14d24b4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -7,8 +7,10 @@
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_pci.h>
@@ -25,7 +27,9 @@
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pci_hotplug.h>
+#include <linux/vmalloc.h>
#include <asm/setup.h>
+#include <asm/dma.h>
#include <linux/aer.h>
#include "pci.h"
@@ -81,6 +85,9 @@
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
+#define DEFAULT_HOTPLUG_BUS_SIZE 1
+unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
+
enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
/*
@@ -101,6 +108,21 @@
/* If set, the PCIe ARI capability will not be used. */
static bool pcie_ari_disabled;
+/* Disable bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_disable;
+/* Force bridge_d3 for all PCIe ports */
+static bool pci_bridge_d3_force;
+
+static int __init pcie_port_pm_setup(char *str)
+{
+ if (!strcmp(str, "off"))
+ pci_bridge_d3_disable = true;
+ else if (!strcmp(str, "force"))
+ pci_bridge_d3_force = true;
+ return 1;
+}
+__setup("pcie_port_pm=", pcie_port_pm_setup);
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -2156,6 +2178,164 @@
}
/**
+ * pci_bridge_d3_possible - Is it possible to put the bridge into D3
+ * @bridge: Bridge to check
+ *
+ * This function checks if it is possible to move the bridge to D3.
+ * Currently we only allow D3 for recent enough PCIe ports.
+ */
+static bool pci_bridge_d3_possible(struct pci_dev *bridge)
+{
+ unsigned int year;
+
+ if (!pci_is_pcie(bridge))
+ return false;
+
+ switch (pci_pcie_type(bridge)) {
+ case PCI_EXP_TYPE_ROOT_PORT:
+ case PCI_EXP_TYPE_UPSTREAM:
+ case PCI_EXP_TYPE_DOWNSTREAM:
+ if (pci_bridge_d3_disable)
+ return false;
+ if (pci_bridge_d3_force)
+ return true;
+
+ /*
+ * It should be safe to put PCIe ports from 2015 or newer
+ * to D3.
+ */
+ if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
+ year >= 2015) {
+ return true;
+ }
+ break;
+ }
+
+ return false;
+}
+
+static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
+{
+ bool *d3cold_ok = data;
+ bool no_d3cold;
+
+ /*
+ * The device needs to be allowed to go D3cold and if it is wake
+ * capable to do so from D3cold.
+ */
+ no_d3cold = dev->no_d3cold || !dev->d3cold_allowed ||
+ (device_may_wakeup(&dev->dev) && !pci_pme_capable(dev, PCI_D3cold)) ||
+ !pci_power_manageable(dev);
+
+ *d3cold_ok = !no_d3cold;
+
+ return no_d3cold;
+}
+
+/*
+ * pci_bridge_d3_update - Update bridge D3 capabilities
+ * @dev: PCI device which is changed
+ * @remove: Is the device being removed
+ *
+ * Update upstream bridge PM capabilities accordingly depending on if the
+ * device PM configuration was changed or the device is being removed. The
+ * change is also propagated upstream.
+ */
+static void pci_bridge_d3_update(struct pci_dev *dev, bool remove)
+{
+ struct pci_dev *bridge;
+ bool d3cold_ok = true;
+
+ bridge = pci_upstream_bridge(dev);
+ if (!bridge || !pci_bridge_d3_possible(bridge))
+ return;
+
+ pci_dev_get(bridge);
+ /*
+ * If the device is removed we do not care about its D3cold
+ * capabilities.
+ */
+ if (!remove)
+ pci_dev_check_d3cold(dev, &d3cold_ok);
+
+ if (d3cold_ok) {
+ /*
+ * We need to go through all children to find out if all of
+ * them can still go to D3cold.
+ */
+ pci_walk_bus(bridge->subordinate, pci_dev_check_d3cold,
+ &d3cold_ok);
+ }
+
+ if (bridge->bridge_d3 != d3cold_ok) {
+ bridge->bridge_d3 = d3cold_ok;
+ /* Propagate change to upstream bridges */
+ pci_bridge_d3_update(bridge, false);
+ }
+
+ pci_dev_put(bridge);
+}
+
+/**
+ * pci_bridge_d3_device_changed - Update bridge D3 capabilities on change
+ * @dev: PCI device that was changed
+ *
+ * If a device is added or its PM configuration, such as is it allowed to
+ * enter D3cold, is changed this function updates upstream bridge PM
+ * capabilities accordingly.
+ */
+void pci_bridge_d3_device_changed(struct pci_dev *dev)
+{
+ pci_bridge_d3_update(dev, false);
+}
+
+/**
+ * pci_bridge_d3_device_removed - Update bridge D3 capabilities on remove
+ * @dev: PCI device being removed
+ *
+ * Function updates upstream bridge PM capabilities based on other devices
+ * still left on the bus.
+ */
+void pci_bridge_d3_device_removed(struct pci_dev *dev)
+{
+ pci_bridge_d3_update(dev, true);
+}
+
+/**
+ * pci_d3cold_enable - Enable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to enable D3cold from the device
+ * they handle. It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_enable(struct pci_dev *dev)
+{
+ if (dev->no_d3cold) {
+ dev->no_d3cold = false;
+ pci_bridge_d3_device_changed(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_enable);
+
+/**
+ * pci_d3cold_disable - Disable D3cold for device
+ * @dev: PCI device to handle
+ *
+ * This function can be used in drivers to disable D3cold from the device
+ * they handle. It also updates upstream PCI bridge PM capabilities
+ * accordingly.
+ */
+void pci_d3cold_disable(struct pci_dev *dev)
+{
+ if (!dev->no_d3cold) {
+ dev->no_d3cold = true;
+ pci_bridge_d3_device_changed(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(pci_d3cold_disable);
+
+/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
*/
@@ -2189,6 +2369,7 @@
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+ dev->bridge_d3 = pci_bridge_d3_possible(dev);
dev->d3cold_allowed = true;
dev->d1_support = false;
@@ -3165,6 +3346,23 @@
#endif
}
+/**
+ * pci_unmap_iospace - Unmap the memory mapped I/O space
+ * @res: resource to be unmapped
+ *
+ * Unmap the CPU virtual address @res from virtual address space.
+ * Only architectures that have memory mapped IO functions defined
+ * (and the PCI_IOBASE value defined) should call this function.
+ */
+void pci_unmap_iospace(struct resource *res)
+{
+#if defined(PCI_IOBASE) && defined(CONFIG_MMU)
+ unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
+
+ unmap_kernel_range(vaddr, resource_size(res));
+#endif
+}
+
static void __pci_set_master(struct pci_dev *dev, bool enable)
{
u16 old_cmd, cmd;
@@ -4897,7 +5095,7 @@
return pci_set_resource_alignment_param(buf, count);
}
-BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
+static BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
pci_resource_alignment_store);
static int __init pci_resource_alignment_sysfs_init(void)
@@ -4923,7 +5121,7 @@
}
#ifdef CONFIG_PCI_DOMAINS_GENERIC
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
+static int of_pci_bus_find_domain_nr(struct device *parent)
{
static int use_dt_domains = -1;
int domain = -1;
@@ -4967,7 +5165,13 @@
domain = -1;
}
- bus->domain_nr = domain;
+ return domain;
+}
+
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent)
+{
+ return acpi_disabled ? of_pci_bus_find_domain_nr(parent) :
+ acpi_pci_bus_find_domain_nr(bus);
}
#endif
#endif
@@ -5021,6 +5225,11 @@
pci_hotplug_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "hpmemsize=", 10)) {
pci_hotplug_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "hpbussize=", 10)) {
+ pci_hotplug_bus_size =
+ simple_strtoul(str + 10, &str, 0);
+ if (pci_hotplug_bus_size > 0xff)
+ pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
} else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
pcie_bus_config = PCIE_BUS_TUNE_OFF;
} else if (!strncmp(str, "pcie_bus_safe", 13)) {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a814bbb..9730c47 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -82,6 +82,8 @@
void pci_ea_init(struct pci_dev *dev);
void pci_allocate_cap_save_buffers(struct pci_dev *dev);
void pci_free_cap_save_buffers(struct pci_dev *dev);
+void pci_bridge_d3_device_changed(struct pci_dev *dev);
+void pci_bridge_d3_device_removed(struct pci_dev *dev);
static inline void pci_wakeup_event(struct pci_dev *dev)
{
@@ -94,6 +96,15 @@
return !!(pci_dev->subordinate);
}
+static inline bool pci_power_manageable(struct pci_dev *pci_dev)
+{
+ /*
+ * Currently we allow normal PCI devices and PCI bridges transition
+ * into D3 if their bridge_d3 is set.
+ */
+ return !pci_has_subordinate(pci_dev) || pci_dev->bridge_d3;
+}
+
struct pci_vpd_ops {
ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 22ca641..7fcea75 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -83,7 +83,7 @@
depends on PCIEPORTBUS && PM
config PCIE_DPC
- tristate "PCIe Downstream Port Containment support"
+ bool "PCIe Downstream Port Containment support"
depends on PCIEPORTBUS
default n
help
@@ -92,6 +92,3 @@
will be handled by the DPC driver. If your system doesn't
have this capability or you do not want to use this feature,
it is safe to answer N.
-
- To compile this driver as a module, choose M here: the module
- will be called pcie-dpc.
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 2dfe7fd..0ec649d 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -139,7 +139,7 @@
static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
{
/* Don't enable Clock PM if the link is not Clock PM capable */
- if (!link->clkpm_capable && enable)
+ if (!link->clkpm_capable)
enable = 0;
/* Need nothing if the specified equals to current state */
if (link->clkpm_enabled == enable)
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index ab552f1..250f878 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -15,8 +15,8 @@
struct dpc_dev {
struct pcie_device *dev;
- struct work_struct work;
- int cap_pos;
+ struct work_struct work;
+ int cap_pos;
};
static void dpc_wait_link_inactive(struct pci_dev *pdev)
@@ -89,7 +89,7 @@
int status;
u16 ctl, cap;
- dpc = kzalloc(sizeof(*dpc), GFP_KERNEL);
+ dpc = devm_kzalloc(&dev->device, sizeof(*dpc), GFP_KERNEL);
if (!dpc)
return -ENOMEM;
@@ -98,11 +98,12 @@
INIT_WORK(&dpc->work, interrupt_event_handler);
set_service_data(dev, dpc);
- status = request_irq(dev->irq, dpc_irq, IRQF_SHARED, "pcie-dpc", dpc);
+ status = devm_request_irq(&dev->device, dev->irq, dpc_irq, IRQF_SHARED,
+ "pcie-dpc", dpc);
if (status) {
dev_warn(&dev->device, "request IRQ%d failed: %d\n", dev->irq,
status);
- goto out;
+ return status;
}
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
@@ -117,9 +118,6 @@
FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), (cap >> 8) & 0xf,
FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
return status;
- out:
- kfree(dpc);
- return status;
}
static void dpc_remove(struct pcie_device *dev)
@@ -131,14 +129,11 @@
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
ctl &= ~(PCI_EXP_DPC_CTL_EN_NONFATAL | PCI_EXP_DPC_CTL_INT_EN);
pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
-
- free_irq(dev->irq, dpc);
- kfree(dpc);
}
static struct pcie_port_service_driver dpcdriver = {
.name = "dpc",
- .port_type = PCI_EXP_TYPE_ROOT_PORT | PCI_EXP_TYPE_DOWNSTREAM,
+ .port_type = PCIE_ANY_PORT,
.service = PCIE_PORT_SERVICE_DPC,
.probe = dpc_probe,
.remove = dpc_remove,
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 32d4d0a..e9270b4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/pcieport_if.h>
@@ -342,6 +343,8 @@
return retval;
}
+ pm_runtime_no_callbacks(device);
+
return 0;
}
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index be35da2..70d7ad8 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -93,6 +93,26 @@
return 0;
}
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+ /*
+ * Assume the PCI core has set bridge_d3 whenever it thinks the port
+ * should be good to go to D3. Everything else, including moving
+ * the port to D3, is handled by the PCI core.
+ */
+ return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
+}
+
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume = pcie_port_device_resume,
@@ -101,6 +121,9 @@
.poweroff = pcie_port_device_suspend,
.restore = pcie_port_device_resume,
.resume_noirq = pcie_port_resume_noirq,
+ .runtime_suspend = pcie_port_runtime_suspend,
+ .runtime_resume = pcie_port_runtime_resume,
+ .runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
@@ -134,16 +157,39 @@
return status;
pci_save_state(dev);
+
/*
- * D3cold may not work properly on some PCIe port, so disable
- * it by default.
+ * Prevent runtime PM if the port is advertising support for PCIe
+ * hotplug. Otherwise the BIOS hotplug SMI code might not be able
+ * to enumerate devices behind this port properly (the port is
+ * powered down preventing all config space accesses to the
+ * subordinate devices). We can't be sure for native PCIe hotplug
+ * either so prevent that as well.
*/
- dev->d3cold_allowed = false;
+ if (!dev->is_hotplug_bridge) {
+ /*
+ * Keep the port resumed 100ms to make sure things like
+ * config space accesses from userspace (lspci) will not
+ * cause the port to repeatedly suspend and resume.
+ */
+ pm_runtime_set_autosuspend_delay(&dev->dev, 100);
+ pm_runtime_use_autosuspend(&dev->dev);
+ pm_runtime_mark_last_busy(&dev->dev);
+ pm_runtime_put_autosuspend(&dev->dev);
+ pm_runtime_allow(&dev->dev);
+ }
+
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
+ if (!dev->is_hotplug_bridge) {
+ pm_runtime_forbid(&dev->dev);
+ pm_runtime_get_noresume(&dev->dev);
+ pm_runtime_dont_use_autosuspend(&dev->dev);
+ }
+
pcie_port_device_remove(dev);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8e3ef72..93f280d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -16,6 +16,7 @@
#include <linux/aer.h>
#include <linux/acpi.h>
#include <linux/irqdomain.h>
+#include <linux/pm_runtime.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
@@ -832,6 +833,12 @@
u8 primary, secondary, subordinate;
int broken = 0;
+ /*
+ * Make sure the bridge is powered on to be able to access config
+ * space of devices below it.
+ */
+ pm_runtime_get_sync(&dev->dev);
+
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
primary = buses & 0xFF;
secondary = (buses >> 8) & 0xFF;
@@ -1012,6 +1019,8 @@
out:
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
+ pm_runtime_put(&dev->dev);
+
return max;
}
EXPORT_SYMBOL(pci_scan_bridge);
@@ -2077,6 +2086,15 @@
}
/*
+ * Make sure a hotplug bridge has at least the minimum requested
+ * number of buses.
+ */
+ if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) {
+ if (max - bus->busn_res.start < pci_hotplug_bus_size - 1)
+ max = bus->busn_res.start + pci_hotplug_bus_size - 1;
+ }
+
+ /*
* We've scanned the bus and so we know all about what's on
* the other side of any bridges that may be on this bus plus
* any devices.
@@ -2127,7 +2145,9 @@
b->sysdata = sysdata;
b->ops = ops;
b->number = b->busn_res.start = bus;
- pci_bus_assign_domain_nr(b, parent);
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+ b->domain_nr = pci_bus_find_domain_nr(b, parent);
+#endif
b2 = pci_find_bus(pci_domain_nr(b), bus);
if (b2) {
/* If we already got to this bus through a different bridge, ignore it */
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8982026..d1ef7ac 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -96,6 +96,8 @@
dev->subordinate = NULL;
}
+ pci_bridge_d3_device_removed(dev);
+
pci_destroy_dev(dev);
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 48672fa..ac352fe 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -382,7 +382,7 @@
* need to have the registers polled during D3, so avoid D3cold.
*/
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
- pdev->no_d3cold = true;
+ pci_d3cold_disable(pdev);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 89ab057..7d63a66 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,6 +24,8 @@
}
extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
+extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+
static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
{
struct pci_bus *pbus = pdev->bus;
diff --git a/drivers/pci/ecam.h b/include/linux/pci-ecam.h
similarity index 94%
rename from drivers/pci/ecam.h
rename to include/linux/pci-ecam.h
index 9878beb..7adad20 100644
--- a/drivers/pci/ecam.h
+++ b/include/linux/pci-ecam.h
@@ -27,8 +27,7 @@
struct pci_ecam_ops {
unsigned int bus_shift;
struct pci_ops pci_ops;
- int (*init)(struct device *,
- struct pci_config_window *);
+ int (*init)(struct pci_config_window *);
};
/*
@@ -45,6 +44,7 @@
void __iomem *win; /* 64-bit single mapping */
void __iomem **winp; /* 32-bit per-bus mapping */
};
+ struct device *parent;/* ECAM res was from this dev */
};
/* create and free pci_config_window */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b67e4df..5db39dd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -101,6 +101,10 @@
DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
};
+/*
+ * pci_power_t values must match the bits in the Capabilities PME_Support
+ * and Control/Status PowerState fields in the Power Management capability.
+ */
typedef int __bitwise pci_power_t;
#define PCI_D0 ((pci_power_t __force) 0)
@@ -116,7 +120,7 @@
static inline const char *pci_power_name(pci_power_t state)
{
- return pci_power_names[1 + (int) state];
+ return pci_power_names[1 + (__force int) state];
}
#define PCI_PM_D2_DELAY 200
@@ -294,6 +298,7 @@
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
unsigned int no_d3cold:1; /* D3cold is forbidden */
+ unsigned int bridge_d3:1; /* Allow D3 for bridge */
unsigned int d3cold_allowed:1; /* D3cold is allowed by user */
unsigned int mmio_always_on:1; /* disallow turning off io/mem
decoding during bar sizing */
@@ -1083,6 +1088,8 @@
bool pci_dev_run_wake(struct pci_dev *dev);
bool pci_check_pme_status(struct pci_dev *dev);
void pci_pme_wakeup_bus(struct pci_bus *bus);
+void pci_d3cold_enable(struct pci_dev *dev);
+void pci_d3cold_disable(struct pci_dev *dev);
static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
bool enable)
@@ -1167,6 +1174,7 @@
unsigned long pci_address_to_pio(phys_addr_t addr);
phys_addr_t pci_pio_to_address(unsigned long pio);
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+void pci_unmap_iospace(struct resource *res);
static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
@@ -1389,12 +1397,13 @@
{
return bus->domain_nr;
}
-void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
+#ifdef CONFIG_ACPI
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus);
#else
-static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
- struct device *parent)
-{
-}
+static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{ return 0; }
+#endif
+int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
#endif
/* some architectures require additional setup to direct VGA traffic */
@@ -1706,6 +1715,7 @@
extern unsigned long pci_hotplug_io_size;
extern unsigned long pci_hotplug_mem_size;
+extern unsigned long pci_hotplug_bus_size;
/* Architecture-specific versions may override these (weak) */
void pcibios_disable_device(struct pci_dev *dev);
@@ -1722,7 +1732,7 @@
extern struct dev_pm_ops pcibios_pm_ops;
#endif
-#ifdef CONFIG_PCI_MMCONFIG
+#if defined(CONFIG_PCI_MMCONFIG) || defined(CONFIG_ACPI_MCFG)
void __init pci_mmcfg_early_init(void);
void __init pci_mmcfg_late_init(void);
#else