r8152: use usleep_range
Replace mdelay with usleep_range to avoid busy loop.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f95e678..2130c75 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2051,13 +2051,13 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
for (i = 0; i < 1000; i++) {
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
for (i = 0; i < RTL8152_MAX_RX; i++)
@@ -2202,7 +2202,7 @@
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
- mdelay(3);
+ usleep_range(3000, 6000);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
}
@@ -2288,7 +2288,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2299,7 +2299,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
rtl8152_nic_reset(tp);
@@ -2360,7 +2360,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2371,7 +2371,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
@@ -2518,7 +2518,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2529,7 +2529,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
@@ -2573,7 +2573,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2584,7 +2584,7 @@
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);